Studio Equipment charts

Notes: Stickies are double-sided adhesive pads, used to affix small, personal microphones directly onto the skin or on top of clothing. The pads are sandwiched with a soft fabric to prevent the mount from creaking when the mic is attached. The materials used are hypoallergenic.

Notes: Are you and your session players and bandmates tired of straining to hear underpowered headphones? That's why Jim Odom and his jambalaya-fueled team of engineers designed 150 mW headphone amps for the HP4 headphone-distribution system.

These headphone amps are not just loud enough for session and stage use, they're loud enough to explode the oysters in a Po' Boy sandwich. Yet the sound is clear and clean, with a wide dynamic range. At last, everybody will be able to heariassuming they are capable of hearing. Be careful with that level control.

Simplicity is the HP4's hallmark. You get left and right line inputs, left and right line outputs with level control, and the 4 x headphone outs. You can globally mute the headphone outs, adjust the overall headphone level, sum the stereo signals to mono, and mute the rear-panel Monitor outputs.

The HP4 can sit on a tabletop or can be screw-mounted to a standard rack tray (not included), where it requires just 1/3 rackspace. And if your needs grow, you can use the line outputs to feed the inputs of a second HP4 or an HP60. Chain as many headphone systems as you need.

So listen up. Quit struggling with mediocre headphone amps. Get the HP4 and hear everything loud and clear. You owe it to your music.

www.youtube.com/watch?v=GOt3LDMtsFM

Notes: M6 Cage nuts and bolts used for mounting equipment in cabinets/racks.

Includes:
20x Captive cage nuts
20x Bolts
20x Nylon washers

Notes: Single cross head M6 screw - 13mm long

Notes: Single cross head M6 screw - 30mm long

Notes: Eurorack-outputs deluxe:
Besides spectacular sound engines and -shapers, usual and unconventional sources and manipulators of control voltages, every modular system also needs a choice of modules for the "daily" business. twinOUT is such a module: the perfect connection to the outer world.

This DI-box in a module offer two adjustable electronically balanced XLR-outputs. twinOut is designed for full stereophonic or dual mono use. To complete its functional range, a headphone output was added - being also suitable to transport line levels.

Like every VERMONA module, each twinOUT is hand-assembled in our electroacoustic manufactory in Germany. If you want to get the most of your modular synthesizer, you cannot pass by the twinOUT!

Notes: The tools we use to compose and produce music are dear to our hearts. The studio elements of dust, smoke and liquid have taken many a good analogue synth down over the years. This is where Decksaver steps in.

Precision trimmed for a perfect fit whilst accommodating cables, the Minilogue can sit ready for operation.

Slides straight into a flight or soft case for maximum protection during transportation.

Shields delicate controls and internal components from damage at home, on the road and on stage.

*Photographed Korg Minilogue keyboard is not included

Notes: PSU for IK Multimedia iRig Mix mobile mixer.

Notes: Engineered in the UK specifically for the Arturia Keystep Controller. Custom moulded to fit the contours of the unit whilst leaving USB connections in place, the Arturia Keystep can sit ready for operation. Super durable polycarbonate shell protects delicate keys during transportation and slides straight into a flight case or bag for maximum protection. Don't go losing your keys!

Notes: The 2hp Buff is a buffered multiple capable of splitting an input signal to multiple outputs. Due to its active architecture, inputs retain their full integrity as they are copied to multiple destinations. One input signal can be copied to six outputs, or two inputs can be copied to three outputs each. The Buff is especially great for splitting pitch or audio signals where signal integrity is critical. Keep your signals in shape with Buff.

Notes: Right angle 2.1mm barrel plug (5.5mm outer diameter, positive tip). Short barrel to barrel cable for daisy-chaining Row Powers and/or Pods. Cable is 11" long (centre of tip to centre of tip), suitable for two Pods next to each other or in front/behind each other. Also compatible with Row Power modules.

Both ends of the cable have a right-angle plug.

Notes: Jumper cable for connecting two Listen 4, Listen 4Q, or Listen IO modules & for daisy-chaining multiple Listens to create a larger mixer. Also used for connecting a WAV Recorder to a Listen module in order to record directly from the Listen's main mix. See the Listen module manuals for details and examples.

One cable connects two modules. By adding more cables you can create a chain between multiple modules.

Specifications:

1x3 pin female header
Pin Spacing: 0.1" (2.54mm)
Total length: 4.38" (111mm)

Notes: 4ms blank panel - 2HP width. Black coloured PCB material with 4ms logo.

Notes: 4ms blank panel - 8HP width. Black coloured PCB material with 4ms logo.

Notes: 4ms blank panel - 10HP width. Black coloured PCB material with 4ms logo.

Notes: MISO is a multipurpose utility module, a laboratory for synthesizing control voltage signals and audio. MISO combines multiple CV tools into one module for making complex CV shapes at the output stage. The name comes from the four main functions available: Mix, Invert, Scale, and Offset.

MISO's 2 sections (1/2 IN and A/B IN) are identical. Each section has two inputs that can be used to Mix signals, Invert polarity/shape, Scale magnitude and Offset voltage. Each function can be used independently or simultaneously with the total shape summed to the mix output.

At the centre of the module is another processor, an accurate smooth linear voltage-controlled crossfader that mixes equally between the outputs of the top and the bottom MISO sections. Feed the MISOs with envelopes, LFOs, Sequences to create new shapes and then crossfade them manually or with CV using the centre section for even further complexity of shapes and animation of control signals. Crossfade between the waveforms of a VCO or audio samples with CV for more motion.

There are an endless number of ways to patch MISO with unexpected and inspiring results. MISO is the kind of module that gives modular synthesizers its incredible replay value, rewarding hours of creative explorations and its experimental and non-traditional mixing.

MISO offers a lot in a small comfortable module that matches Tiptop's system look with clean white faceplate styling. A red/yellow indicator light next to each section makes it easy to see signals and visualize polarity.

Notes: The Pod48X is 48HP with 2.00" (51mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod48X includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: The Field Kit Sensor Pack A consists of 5 sensors:

- Button/Jack
- Electret Microphone
- Light Sensor
- Temperature Sensor
- Ball Switch
- 2 x Dupont 3 contact cable to connect the Sensors to the Field Kit

Button/Jack:

This is rather a utility tool than an actual sensor. It allows you to either use a pushbutton or any CV-Signal (0- 5V) as a signal source. You can select to either use the button or any signal connected to the jack input with the jumper located right next to pin-header. The voltage present at the output upon a button press can be selected with the two jumpers next to the button. The button and jack can be used with both the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Electret Microphone:

The electret microphone provides a simple solution to use your surroundings as a sample source. The board features a little trimmer to adjust the gain of the microphone pre-amplifier. Use a little screwdriver to adjust the gain according to the printing on the sensor board. It's preferable to adjust the signal level with the trimmer first and only use the level pot of the analog signal interface as a second adjustment stage. The electret microphone has an omnidirectional directivity and is capable of capturing the whole frequency spectrum from 20 to 20000 Hz. The electret microphone is best be used with the ANALOG IN of the Field Kit's Sensor Interface.

Light Sensor:

The light sensor will change the output voltage depending on the light intensity. The spectral sensitivity is similar to the human eye, covering the full spectra of visible light, with a peak at 570nm (green/yellow). The change of the voltage according to the light intensity can be set with the three jumpers on the board. Set those jumpers according to printing on the board. The light sensor can be used with the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Temperature Sensor:

The temperature board features two output modes: a continuous CV or a trigger.

CV Mode: The board will output a continuous voltage in range 0 - 5 V depending on the measured temperature and scaled to the set lower and upper temperature limit.

Trigger Mode: The board will generate a trigger whenever the measured temperature rises above the set upper limit temperature. LED 1 will blink whenever a trigger is generated. The sensor covers a temperature range from -55-C to +125-C.

Ball Switch:

The ball switch consists of a little bouncy ball jumping around in a container connecting two contacts and thus acts like a switch. In contrary to a normal push button, which has very well defined states, the switching of a ball switch is more similar to a percussion shaker. There are two resting-positions which define a certain state of the switch: the board is lying flat on the table with its bottom facing the table: the switch is open the board is lying flat on the table with its top facing the table: the switch is closed. The voltage assigned to those states can be set with the two jumpers on the board. Refer to the printing on the board to identify the position that suits your needs. The ball switch can be used with the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Notes: The Mini Case offers 40 HP for mounting modules. A power supply is built-in.

208 mm long x 45mm deep.

PLEASE NOTE: Comes with EU 2 pin plug only - UK adapter may be required.

Notes: The Control Voltage Processor from Verbos Electronics GmbH is a suite of control voltage processing possibilities divided into 3 sections in a slim 18HP package. The lower 2 sections are DC coupled mixers that allow mixing, inverting, offsetting, scaling, multiplying, dividing, crossfading or a combination of these functions. The top section is a voltage controlled slewing processor with independent control of Positive and Negative slew rate, with some unique tricks. The Positive and Negative slew, or Rise and Fall rates if you like, have reversing attenuators. The slopes can be blended from linear to RC curves (starting all slides fast and ending slow, like a proper "East Coast" Portamento) without a change in speed. It can be triggered like an AD envelope and has a Gate out that goes high when the CV out is below 100mV. Of course it can loop by patching the Gate out to the Trigger in. The Bounce control adds a unique flare of overshoot to CV changes, a bit like the effect of stopping a tape reel from turning and then letting it go. The combination of multiple voltage processors offers the user the functions of analogue computer.

Notes: High-speed for guitarists! This small, black Aluminium USB audio-interface is a really cool tool for guitar and microphone recordings! In any case, with it's fast ASIO driver the GUITARFACE II USB is fast enough for speed-metal!

Works driverless with Mac OS/X, Apple iOS 4.2, Windows XP SP2, Windows Vista, Windows 7, 8 and 10

ASIO driver for Windows XP 32/64 Bit, Windows Vista 32/64 Bit and Windows 7/8/10 32/64 Bit available!

Inclusive: free Miditech software bundle (download versions): Toontrack EZ Mix 2 lite, Magix Samplitude Pro X2 Silver, Makemusic Finale Notepad, Ik Multimedias Amplitube CS, Magix Independence free, Waldorf Edition LE and Imagelines Poizone Synthesizer

Notes: USB Audio-Interface for all cases: With two build-in Microphone-Preamps with Phantom Power and a complete 16 Bit/48 kHz Stereo Instrument/Line Interface this class compliant USB Audio Interface is very easy to use. Fully USB powered, with fast Windows ASIO drivers and adjustable headphone output the Audiolink III gives you all the recording possibilities you will ever need. New: The two XLR/TRS combo inputs on the front side.

Works driverless with Mac OS/X, Windows XP SP2, Windows Vista, Windows 7, 8 and Windows 10

ASIO driver for Windows XP/Vista/Win7/Win8 and Windows 10 for download available

Inclusive: free Miditech software bundle (download versions): Toontrack EZ Mix 2 lite, Magix Samplitude Pro X2 Silver, Makemusic Finale Notepad, Ik Multimedias Amplitube CS, Magix Independence free, Waldorf Edition LE and Imagelines Poizone Synthesizer

Notes: You're making tomorrow's music... so why settle for yesterday's interface? AudioFuse is the revolutionary pro audio interface that sets a new standard in sonic quality, creative production and value. It fuses the superior sound of high-end analog studio consoles with the flexibility of a solid mobile interface- with all the connectivity you need for any recording or performance.

Whatever sound you need to capture, from the most delicate ambience to the heaviest cacophony, AudioFuse will reveal the beauty in everything.

Pro studio quality was the mantra right from the start with AudioFuse. Now you can transform your desktop, hotel room, concert- whatever, wherever- into a studio with world-class sound.

No compromises, each element of the AudioFuse has been selected to perfectly serve your sound, such as the two proprietary DiscretePROr microphone preamplifiers and the set of top-notch AD/DA converters.

Saving the purity of your sound and the passion it conveys is what AudioFuse is all about.

When creating and recording, you need an interface that lets you focus on the task at hand and keep distractions to a minimum.

With AudioFuse, we didn't want to settle for merely bringing you the sound quality of a pro studio, we wanted to bring you its workflow too. That's why you have detailed metering, talkback for instant communication with talent in the next room, inserts to add professional effects processing to your recording chain, A/B monitor switching, and direct access to the essential features so you can spend more time creating and less time setting up.

Wherever it comes from, whatever it has to travel through, and wherever it needs to go, AudioFuse will guide your sound.

AudioFuse connects with virtually everything: mics, instruments, turntables, studio equipment, Mac, PC, tablets, even iOS and Android phones. It all happens with a round-trip latency as low as 3 milliseconds so you'll feel right in the groove every time.

When you know your equipment is the best of the best, creativity can take care of itself.

When it is all about giving the best of yourself being able to rely on the best technologies becomes crucial. The lowest harmonic distortion, the most linear frequency response, the highest signal-to-noise ratio and the shortest latency, these technical terms may seem far removed from your creative process, but they are essential to delivering your music in the highest quality possible.

Capture the moment- at home, in the studio, on the road, or wherever creativity strikes.

AudioFuse has a super-solid aluminum chassis you can trust, complete with a hard cover to protect it from damage in your bag- or even just dust on your desktop. The build quality goes far beyond a great-looking exterior, as well. Your unit has to pass rigorous testing before it can be packed and shipped. It even comes with a test specification printout of your exact unit. Meet your new best friend for the studio and stage.

Notes: The EHX 1440 Stereo Looper is a compact powerhouse that provides 1440 seconds of high-quality, uncompressed, stereo recording time plus the ability to store 20 different loops. It can even tempo sync to an external MIDI device and is packed with features you'll want. Unlimited overdubbing means you can lay down as many parts as you like while variable tempo playback plus Reverse and Octave speed effects really enhance creative control.

A 1 Shot function is also included, adjustable fadeout times and optional external footswitch control for selecting loops and Undo/Redo. The affordable 1440 Stereo Looper puts a ton of looping power on your pedalboard.

Notes: Ever since the 1970's the iconic white woofer and signature sound of Yamaha's nearfield reference monitors have become a genuine industry standard for a reason - their accuracy. Unlike studio monitors with added bass or treble frequencies which may sound more flattering at first, HS Series speakers were designed to give you the most honest, precise reference possible, providing an ideal sonic platform to build on throughout the mixing process.

By combining acquired knowledge and expertise with state-of-the-art sound technologies, Yamaha's speaker engineering team have examined, then optimized, every aspect that has contributed to making these monitors the most trusted in the business. The second generation HS Series also adds a new 6.5" model to the lineup, bringing its exceptional accuracy to an even greater variety of recording environments.

8" bass-reflex powered subwoofer delivers low frequencies down to 22Hz
22Hz - 150Hz frequency response
High-power 150W amplifier exclusively designed for low frequencies
LOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)
PHASE switch allow users to set up a subwoofer system with simple connections and no additional equipment
XLR and TRS phone for inputs and XLR for outputs

Notes: Convenient Connections

Use this module to tap into the 3-pin LINK connector used in several Intellijel products, including Mixup, Pedal I/O and the Palette and 2nd Generation Audio Jacks Board in a 7U case.

The XY I/O uses two 3.5mm TRS jacks, which accept insert cables to provide send/return capability to a pair of Pedal I/O's, or additional stereo inputs (or outputs) to a pair of Mixups, or one of each.

A third 3-pin Link connector on the back panel allows the X and Y jacks to access the L/R (or Send/Return) jacks on a single connected module or case without needing a stereo cable.

Width: 4HP
Depth: 24mm

Notes: Small and efficient MIDI to CV courtesy of Intellijel's 1U series. Works in conjunction with an Intellijel case or the MIDI IN Jacks 1U module to give you Pitch, Velocity, Mod, CC, Gate, Trig, Clock and Reset.

Supplier's Notes:
The MIDI 1U system provides all the essentials to control and sync your Eurorack modular from your computer, mobile, or hardware MIDI device with a minimum of fuss. Several of the module's most important features can be changed using the two front panel buttons, with full configuration capabilities offered via the Intellijel Config app, which is available for both Mac and Windows. The connectivity, feature set, expandability, and compact size make the MIDI 1U system ideal for integrating your modular gear with the rest of your rig.

Intellijel's MIDI 1U system comprises several elements, which work together to provide flexible, programmable MIDI-to-CV conversion to your Eurorack modules: The system comprises two mandatory components, and one optional component:

MIDI 1U module - This 14HP 1U module receives MIDI from an attached, external MIDI input connector (7U case, Palette case, or MIDI IN Jacks 1U module), and extracts (by default) Pitch, Velocity, Mod, CC, Gate, Trig, Clock and Reset messages i sending the proportional voltages to individual 3.5mm jacks for patching.If desired, the CC and MOD jacks may be configured to respond to either Channel Aftertouch or High Resolution CC, and the Reset jacks can be configured as a Run jack, instead. Additionally, MIDI 1U features an alternate Dual Mode, which maintains the Clock & Reset functionality, but uses the other six jacks to transmit Pitch, Velocity and Gate messages derived from two separate MIDI channels.
MIDI input connector - the MIDI 1U module does not have its own MIDI input jack. This enables you to use the MIDI/USB inputs built-in to your Intellijel 7U Performance Case or Palette Case. If you don't own one of these cases, you can purchase the MIDI IN Jacks 1U module to connect an external MIDI device.
MIDI Expander 1U module - This optional 14HP 1U module connects to the MIDI 1U module and adds an additional eight 3.5mm CV outputs. These outputs are fully programmable using the Intellijel Config app, and greatly expand MIDI 1U's ability to control your entire Eurorack system.

Width: 14HP
Depth: 14mm
Power: 34mA @ +12V
2mA @ -12V

Notes: The CVx 1U expander module has eight user-configurable outputs and connects to the MIDI 1U module. Using the Intellijel Config app, you can assign each of the eight jacks to generate just about any type of voltage that can be derived from a MIDI signal; pitch, gates, triggers, clocks, velocity ... you name it! You can chain up to four CVx modules to a single MIDI 1U to add a whopping 32 additional channels of midi control to your modular.

Each CVx module can also allow you to generate 2 or 4 voice polyphonic controls with selectable voice allocation modes. The connectivity, feature set, expandability, and compact size make the MIDI 1U + CVx system ideal for integrating your modular gear with the rest of your rig.

Intellijel's MIDI 1U system comprises several elements, which work together to provide flexible, programmable MIDI-to-CV conversion to your Eurorack modules: The system comprises two mandatory components, and one optional component:

MIDI 1U module - This 14HP 1U module receives MIDI from an attached, external MIDI input connector (7U case, Palette case, or MIDI IN Jacks 1U module), and extracts (by default) Pitch, Velocity, Mod, CC, Gate, Trig, Clock and Reset messages - sending the proportional voltages to individual 3.5mm jacks for patching.If desired, the CC and MOD jacks may be configured to respond to either Channel Aftertouch or High Resolution CC, and the Reset jacks can be configured as a Run jack, instead. Additionally, MIDI 1U features an alternate Dual Mode, which maintains the Clock & Reset functionality, but uses the other six jacks to transmit Pitch, Velocity and Gate messages derived from two separate MIDI channels.

MIDI input connector - the MIDI 1U module does not have its own MIDI input jack. This enables you to use the MIDI/USB inputs built-in to your Intellijel 7U Performance Case or Palette Case. If you don't own one of these cases, you can purchase the MIDI IN Jacks 1U module to connect an external MIDI device.

CVx 1U module - This optional 14HP 1U module connects to the MIDI 1U module and adds an additional eight 3.5mm CV outputs. These outputs are fully programmable using the Intellijel Config app, and greatly expand MIDI 1U's ability to control your entire Eurorack system.

Width: 14HP
Depth: 32mm
Power: 55mA @ +12V
6mA @ -12V

Notes: A fully modular, Eurorack-format version of the excellent Dark Energy synth, the A-111-5 offers VCO, VCF, LFOs, VCA and envelope generator in a compact format. Brilliant value for a starter system.

Supplier's Notes:
Module A-111-5 is a complete monophonic synthesizer module that includes these components (modular version of Dark Energy):

VCO
Manual tune control (with an internal jumper the range can be set to ~ +/-1 half an octave or ~ +/-2.5 octaves)
Range switch -1 / 0 / +1 octave
Frequency range about 10Hz ... 12kHz - FM (frequency modulation) control with modulation source switch (LFO1 / off / ADSR)
Manual pulsewidth control for rectangle waveform
PWM control with modulation source switch (LFO2 / off / ADSR)
Waveform switch (sawtooth / off / triangle)
The sum of the waveform chosen by this switch and the rectangle is fed into the VCF (to turn the rectangle off the PW control has to be set fully CCW)
External CV input for VCO frequency (1V/octave)
External CV input for external PWM of the rectangle - internal CV input for frequency (1V/octave) connected to the A-100 bus via jumper, the jumper can be used to interrupt this internal connection if not wanted

VCF
24 dB low pass
~ 12 octaves frequency range
Manual frequency control
Tracking switch half - off - full (internally connected to the external frequency CV input of the VCO, i.e. the VCF tracks to the VCO if the switch is set to "half" or "full" position)
XM: exponential FM (frequency modulation) control with modulation source switch (LFO2 / off / ADSR)
LM: linear FM (frequency modulation) control to modulate the VCF by the triangle of the VCO in a linear (!) manner
Manual resonance control (up to self oscillation)
External audio input (this signal is added to the VCO signal)
External CV input for filter frequency - 1V/octave tracking for usage of the VCF as a sine wave oscillator (not as precise as the VCO but much better than most of the other filters)
VCA
Manual amplitude control
AM (amplitude modulation) control with modulation source switch (LFO1 / off / ADSR)
External CV input for VCA amplitude - special control scale: exponential scale in the range from about -20dB to -80/90dB, linear scale from about -20dB to 0dB (Remark: this special control scale results in a loudness behaviour that is a bit different from pure linear or exponential VCA)
LFO1 and LFO2
Manual frequency control
Waveform switch (triangle / off / rectangle)
Range switch (low, audio, medium) - LED display (dual green/red color for positive/negative share of the signal)
The inverted LFO1 signal is available as an additional socket (to use the LFO1 signal for external modules)
An internal jumper can be used to select between the LFO1 signal or the inverted LFO1 signal

ADSR
Manual controls for Attack, Decay, Sustain, Release
Range switch (long, short, medium) - blue LED display
ADSR signal is available as an additional socket (to use the ADSR signal for external modules)
Gate input connected to the A-100 bus via jumper, the jumper can be used to interrupt this internal connection if not wanted

Remarks:
As the LFO frequencies can go up to moderate audio range (~ 5kHz) even audio FM effects of VCO (pitch and pulsewidth), VCF and ADSR are possible.

If the VCO is turned off (waveform switch = center position, pulsewidth control = fully CCW) and the VCF resonance is set to maximum the module can be used as a sine oscillator. The sine can be modulated in a linear manner from the triangle wave of the VCO and by LFO2 in an exponential manner at the same time !

From the factory the socket labelled "LFO1" outputs the inverted LFO1 signal. But as the module has several internal pin headers available even another signal may appear at this socket by changing the internal module patch. These six pin headers are available: LFO1 output, LFO2 output, ADSR output, inverter input, inverter output, output socket. The internal default patch is LFO1 -> inverter input, inverter output -> output socket (i.e. socket = inverted LFO1). But even another signal can be patched to this socket (e.g. inverted ADSR, non-inverted LFO1, inverted or non-inverted LFO2). It is also possible to add a blind panel next to the A-111-5 with a couple of sockets that are connected to the corresponding pins of the A-111-5 pc board. The in- and outputs of the VCO, VCF and VCA are not available as pin headers because the VCO, VCF and VCA are internally connected in the circuit which is used in this module.

Notes: A professional microphone boom arm with desk clamp for studio or broadcasting use. Featuring spring retraction for quick and smooth positioning and a lockable hinge for safety.

Rotates 360°
Features spring retraction and a lockable hinge
Microphone clip supplied
For desks with a maximum depth of 50mm

Notes: Row Power is a clean, regulated, and protected power solution for Eurorack systems. Row Power 45 provides enough power for two to three typical Eurorack rows (typically up to about 312HP):
+12V @ 2.0A maximum, 1.5A recommended
-12V @ 1.4A maximum, 1.2A recommended
+5V @ 1.5A maximum, 1.2A recommended

Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying bus cables or the Bus Stick. For custom power systems, the Row Power 45 has a set of easily soldered holes for using large gauge wire or MTA156 connectors to connect to distribution bus boards.

Multiple Row Power modules can be powered from a single power brick by daisy-chaining with an inexpensive barrel cable. The Row Power 45 can also be daisy-chained to 4ms Company's Pod enclosures. Each power supply is independently regulated and protected for ultra-low cross-talk between rows/pods.

The Row Power 45 is compatible with the 4ms Row Power Shield. This device (sold separately) attaches to the back of the Row Power 45 and monitors the amount of current being drawn, as well as the voltages of the power rails. The information is sent over Bluetooth to be displayed on a phone or tablet.

Electrical and Mechanical Specifications

Module Size:
4 HP Eurorack format module

Power Output:
Maximum average load under normal conditions: +12V @ 2.0A, -12V @ 1.4A, +5V @ 1.5A
Maximum average load under any condition: +12V @ 1.5A, -12V @ 1.2A, +5V @ 1.2A
Powered by laptop-style DC power supply: 2.1mm barrel, positive center, 15V-20V.

Included with the Row Power 45:
16-to-16 pin power cable
2 M3 Knurlie screws

Notes: Heavy duty 3.5mm Eurorack patch cables built with an extra thick 4mm PVC jacket, and internal shielding. These are built to last, and feature an ergonomic grip on the connector for comfortable patching and repatching. Available in standard configurations and a multitude of colours and lengths, these cables are sure to become your new favourite patching pals.

Notes: Heavy duty 3.5mm Eurorack patch cables built with an extra thick 4mm PVC jacket, and internal shielding. These are built to last, and feature an ergonomic grip on the connector for comfortable patching and repatching. Available in standard configurations and a multitude of colours and lengths, these cables are sure to become your new favourite patching pals.

Notes: Heavy duty 3.5mm Eurorack patch cables built with an extra thick 4mm PVC jacket, and internal shielding. These are built to last, and feature an ergonomic grip on the connector for comfortable patching and repatching. Available in standard configurations and a multitude of colours and lengths, these cables are sure to become your new favourite patching pals.

Notes: Heavy duty 3.5mm Eurorack patch cables built with an extra thick 4mm PVC jacket, and internal shielding. These are built to last, and feature an ergonomic grip on the connector for comfortable patching and repatching. Available in standard configurations and a multitude of colours and lengths, these cables are sure to become your new favourite patching pals.

Notes: Heavy duty 3.5mm Eurorack patch cables built with an extra thick 4mm PVC jacket, and internal shielding. These are built to last, and feature an ergonomic grip on the connector for comfortable patching and repatching. Available in standard configurations and a multitude of colours and lengths, these cables are sure to become your new favourite patching pals.

Notes: Heavy duty 3.5mm Eurorack patch cables built with an extra thick 4mm PVC jacket, and internal shielding. These are built to last, and feature an ergonomic grip on the connector for comfortable patching and repatching. Available in standard configurations and a multitude of colours and lengths, these cables are sure to become your new favourite patching pals.

Notes: Heavy duty 3.5mm Eurorack patch cables built with an extra thick 4mm PVC jacket, and internal shielding. These are built to last, and feature an ergonomic grip on the connector for comfortable patching and repatching. Available in standard configurations and a multitude of colours and lengths, these cables are sure to become your new favourite patching pals. Eurorac

Notes: Desktop module incarnation of Electrosmith's customisable DSP platform, designed with plenty of audio, MIDI and CV connectivity to allow you to create your own synths, drum machines and sequencers.

Supplier's Notes:
Create a mono-synth, drum machine, or MIDI sequencer with the Field! It works as a great development tool, or handy small-form synth to take with you on the go. Comes with Daisy installed and 9V power adapter.

Notes: The 1-row rack for AE modular is 16 units wide; two of them are used by the MASTER module so you have 14U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions:41.3 x 11.2 x 4.5 cm (width x depth x height)

Notes: Mooer Stage Power Supply PDNT9V2AUK makes the ideal accessory for powering your favourite Mooer guitar effects pedals. Mooer Stage Power Supply PDNT9V2AUK can deliver up to 2 Amps at 9-volt (DC) 2 and features a pedal board style design. PDNT9V2AUK power supply when used with either the 'Power Cable Daisy Chain' PDC-5A (for 5 x pedals) or the PDC-8A (for 8 x pedals), can drive up to eight Mooer FX pedals.

Notes: MOOER has entered into the realm of portable multi-effects processors. The PE100 is a pocket sized, desk top unit which contains everything the guitarist needs tightly wrapped up within a small sleek shell. A full range of amp models, a myriad of effects and stompboxes, a precision tuner, drum patterns and metronomes.

It's dual output jacks make it ideal for connection to amp, hi-fi, headphones or direct to a mixer or computer for direct recording. Super easy to program, small enough to slip into your pocket and powered by a small DC power adapter or by battery. The PE100 is perfect for the guitarist on the go.

Notes: Kickall is a 6HP compact synth voice that features everything needed to make a big fat Kick sound. A stable VCO that tracks V/Oct, a couple of VCAs, envelopes for volume and pitch and an aggressive waveshaper.

The module has been designed with a kick synthesis patch in mind.

The audio path consists of a sinewave oscillator that passes across a Square Waveshaper and two VCA's. The first VCA is for the Volume envelope. The second VCA is dedicated to general volume. Thanks to his CV input, it is possible o apply accents or affects the dynamics of notes. Feeding this input with audio generates a basic AM operation expanding the sonic range of the module.

In the control path, KickAll has two envelope circuits to modulate the first VCA oscillator's pitch. Both envelopes are fired at the same time manually or via dedicated trigger input.

Through its Tune input, KickAll tracks eight octaves with high accuracy. Plug your favourite sequencer or CV source to create patterns out of the kick range, or feed it with an audio signal, for frequency modulation Fx.

Specs

Current needs: +12V: 26mA, -12V: 12mA
Width: 6 HP
Depth: 20mm, (28mm DIY) including power connector
Aluminium, heat-treated front panel.
Designed, kits prepared and completed modules assembled in Barcelona.

Notes: Zadar is a powerful, four-channel envelope, modulation, and transient generator, in a compact yet very complete, feature-rich package. It is capable of synthesising a vast palette of envelope shapes starting from hundreds of shapes stored in the memory. These starting shapes are not mere wavetables, but flexible vectors that can be stretched (from a fraction of a millisecond to half an hour), flipped, warped, distorted, delayed, shuffled, repeated, and amplitude modulated in real time. A set of freely assignable CV inputs allows for external control of most parameters. Each channel can work independently or combined with other channels within one of the chaining and looping algorithms.

Operating Zadar is quick and immediate, thanks to its accessible interface and crisp OLED display. The main screen displays all parameters together with the currently selected shape. Entering the simple 3-page menu is needed only for advanced settings.

Notes: IsoAcoustics introduce the next evolution of their specialized line of speaker stands for the audio professional, music hobbyist, audiophile, and music lover. The new ISO Series of speaker stands provide superior acoustic isolation and enhance the sound clarity of any speakers including studio monitors, home theatre systems and sound reinforcement.

With a lower profile and new contemporary design, the ISO Series of stands positions your studio closer to the supporting surface or meter bridge, and the new redesigned isolators moves the acoustic performance another step forward.

IsoAcoustics ISO Series speaker stands are built with a unique, patented isolation technology that provides a high degree of isolations and manages the speaker's energy to deliver authentic, uncoloured sound. This next generation of speaker stands effectively eliminates energy transfer into the supporting surfaces. Bass becomes tighter, overall imaging is enhanced and your speakers are enabled to perform to their full potential. Following the same design philosophy as the ISO-L8R Series, these isolation stands provide 14 variations of height and tilt adjustment to optimize the placement and performance of studio monitors by getting the tweeters in the correct alignment with the listening position.

Whether you're a pro mixing in the studio - a musician creating in a home project environment - or an audiophile who appreciates every nuance of music and sound - you'll hear and appreciate the difference with the ISO Series speaker stands. It's simply the best investment you can make for superior audio.

ISO-130:

Designed for smaller speakers and studio monitors. These stands provide 14 variations of height and tilt to optimize speaker placement and performance. Isolate your studio monitors from the supporting surface and allow them to breathe so they can deliver the clearest and most accurate sound possible.

5.1"x6"/13x15cm Short: 2.7"/8cm Tall: 8"/20.3cm 20 lbs/9kg

Notes: IsoAcoustics introduce the next evolution of their specialized line of speaker stands for the audio professional, music hobbyist, audiophile, and music lover. The new ISO Series of speaker stands provide superior acoustic isolation and enhance the sound clarity of any speakers including studio monitors, home theatre systems and sound reinforcement.

With a lower profile and new contemporary design, the ISO Series of stands positions your studio closer to the supporting surface or meter bridge, and the new redesigned isolators moves the acoustic performance another step forward.

IsoAcoustics ISO Series speaker stands are built with a unique, patented isolation technology that provides a high degree of isolations and manages the speaker's energy to deliver authentic, uncoloured sound. This next generation of speaker stands effectively eliminates energy transfer into the supporting surfaces. Bass becomes tighter, overall imaging is enhanced and your speakers are enabled to perform to their full potential. Following the same design philosophy as the ISO-L8R Series, these isolation stands provide 14 variations of height and tilt adjustment to optimize the placement and performance of studio monitors by getting the tweeters in the correct alignment with the listening position.

Whether you're a pro mixing in the studio - a musician creating in a home project environment - or an audiophile who appreciates every nuance of music and sound - you'll hear and appreciate the difference with the ISO Series speaker stands. It's simply the best investment you can make for superior audio.

ISO-200:

Designed for larger speakers and studio monitors. These stands provide 14 variations of height and tilt to optimize speaker placement and performance. Isolate your studio monitors from the supporting surface and allow them to breathe so they can deliver the clearest and most accurate sound possible.

7.8"x10"/20×25.4cm Short: 3.5"/12.5cm Tall: 8.75"/22.5cm 60 lbs/27.2kg

Notes: Engineered specifically for the Native Instruments Kontrol S61 MK2 Keyboard Controller. Custom moulded to fit the contours of the S61 MK2 whilst leaving USB connections in place, the Kontrol S61 MK2 can sit ready for operation. Super durable polycarbonate shell protects delicate keys during transportation and slides straight into a flight case or controller bag for maximum protection. Don't go losing your keys.

Notes: Become an instrument with 'the sound of me', based on motion sensor wristbands and wireless receivers, sending MIDI signals to software and hardware.

Supplier's Notes:
SOMI-1 MIDI Controller

Key Features:

Sensors:

Up to 6 sensors simultaneously (add more sensors)
7 different 3D movement parameters per sensor
9-DOF state-of-the-art sensor fusion
Wireless via Bluetoothr 5 based custom protocol
Low latency under 10ms (no perceivable delay)
High Precision (ca. 0.01 degrees)
Range up to 50 meters (164 feet)
Up to 30 hours battery lifetime

Receiver Hub:

MIDI 1.0 Interface (USB-MIDI, TRS-MIDI, MIDI Host)
Connectivity to music software & hardware
Button to pause sensors and MIDI mapping
Encoder to adjust sensitivity
MIDI:

MIDI Note, Control Change and Pitch Bend signals
Adjustable MIDI channel
Direct connection to music software and hardware (no extra drivers or software needed)

Editor:

Scale individual sensor values
Inverse sensor values
Slew limiters for smoothing
Customize MIDI Note range and threshold
Change MIDI Control Change controller
Enable high resolution (14 bit) Control Change
Save settings directly on the SOMI-1 hub
Integrated editor for Ableton Live (Max for Live)
Ableton Live preset projects
SOMI-1 smartphone app (approx. January 2023):

Several different sound presets
No need of additional software or hardware
UI for easy usage without musical or technical pre-knowledge

Includes:
2× SOMI-1 Motion Sensor
2× SOMI-1 Wristband
SOMI-1 Receiver
SOMI-1 Sound app (approx. January 2023)
USB-C cable

Notes: Solenoid push-pull motor for use with the Field Kit DC interface. Use this to get sounds out of objects by hitting them. Who doesn’t like hitting objects?

The DC interface of the Field Kit gives you the possibility to trigger the solenoid rhythmically and control its force.

Notes: Clean up that patch with a package of 8 Modbap Stubs Patch Cables. Stubs are 3" (8cm) long Eurorack patch cables available in four colors variations - pink, blue, white, and black.

Features

Short length patch cables
3" (8cm) long
Pack of 8 cables
Right angle
Modbap brand logo molded
1/8" to 1/8" (3.5mm to 3.5mm)
Mixed Pack of Pink (2), blue (2), black (2), white (2).