Back catalogue: All genres

Notes: Studio Microphone Kit

Studio microphone kit comprising a condenser microphone with shock mount, pop filter, pop shield, XLR lead and adjustable arm mount with clamp. Designed for use with mixing consoles or audio interfaces that have phantom power at the input. Delivers crisp and clear vocals and instrument recordings for project studios, online broadcasts and DAW based applications.

Phantom power: +48V required
Power source: Phantom power 5-48V required
Capsule: 26mmO back electret condenser
Polar pattern: Cardioid
Sensitivity: -38dB i 2dB @ 1kHz (0dB = 1V/Pa)
Impedance: 150 Ohms
S/N ratio: 78dB
SPL: max.132dB @ 1kHz (<1%THD)
Frequency response: 20Hz - 20kHz
Dimensions: 157 x 46mmO (microphone only)
Weight: 228g (microphone only)

In the box

The box for this item contains :

Studio condenser microphone
Spider shock mount holder
Worktop clamp
Articulated arm mount
Foam pop filter
Gooseneck pop shield
XLR F-M lead 2.5m

Notes: Desktop USB soundcard for a computer-based recording studio. Featuring 2 independent microphone inputs on XLR/jack sockets and a separate 6.3mm instrument input. Each input has a gain control and there is an optional echo effect with separate control. Monitoring is via a stereo 6.3mm headphone jack or L+R RCA line output on the rear of the unit for connecting monitor speakers. Power to the interface and two-way digital audio is connected via a USB type-C socket at the rear. Simple yet versatile operation for project studios and DAW recording setups.

Power supply: 5Vdc (from USB)
Connection: USB type-C
Controls: Mic1, Mic2, Inst3, Effect, Monitor
Input connections: 2 x mic XLR/Jack, 1 x 6.3mm instrument jack
Phantom power: +48V switchable to XLR inputs
Frequency response: 10Hz - 30kHz (-0.5dB)
Input impedance: instrument1M Ohm
Input impedance: mic3k Ohm
Max. input sound level: Mic or Instrument +2dBu, Line +22dBu
Dynamic range: 100dB (A-weighted)
Sampling format: 48kHz, 16-bit
Monitor outputs: Headphones (stereo 6.3mm jack), Line out (L+R RCA)
Dimensions: 160 x 110 x 57mm
Weight: 529g

In the box

The box for this item contains:

USB2+1 Audio Interface
1.5m USB C to A lead

Notes: Complete recording kit comprising a USB condenser microphone with shock mount, pop filter, pop shield, USB type B to A lead and adjustable arm mount with clamp. Designed for use with either a PC or Mac computer running a digital recording software suite. The UMK-7 delivers clear vocal or instrument pickup to provide studio quality results from an affordable and uncluttered setup.

Power supply: 5Vdc (from USB)
Capsule16mm: O back electret condenser
Polar pattern: Cardioid
Sensitivity: -48dB +/-2dB @ 1kHz (0dB = 1V/Pa)
Output impedance: 150 Ohms
S/N ratio: 78dB
SPL max.132dB @ 1kHz: (<1%THD)
Frequency response: 30Hz - 18kHz
Dimensions: 157 x 46mmO (microphone only)
Weight: 206g (microphone only)

In the box

The box for this item contains :

USB studio condenser microphone
Spider shock mount holder
Worktop clamp
Articulated arm mount
Foam pop filter
Gooseneck pop shield
USB B to A lead 1.5m

Notes: These supports allow the equipment to be used in an inclined position in such a way that its operation is more comfortable.

The two feet that support the equipment are connected by two 6mm wooden rods. that give it greater stability and prevents the feet from separating.

The temples and the silicone legs are included.

Notes: The AKAI APC 40 MK2 Controller Stand is a highly versatile and practical accessory designed specifically for the APC 40 MK2 MIDI controller. This stand offers a host of features that make it an excellent choice for DJs, musicians, and producers who require an ergonomic, stable, and portable solution.

The stand is carefully crafted to provide an optimal working position for the controller, allowing for comfortable access to all knobs, faders, and buttons. Its ergonomic design ensures that you can use the controller for extended periods without straining your wrists or arms.

Stability is a key feature of the AKAI APC 40 MK2 Controller Stand. It is built with a sturdy and durable construction, ensuring that your controller remains securely in place during intense performances or studio sessions. You can confidently engage with the controls, knowing that the stand will provide a reliable platform.

Additionally, this stand excels in terms of portability. It features a lightweight and compact design, making it easy to transport from one location to another. Whether you’re going to a live gig, a studio session, or simply moving between different workspaces, the stand’s portability ensures that you can conveniently take it with you without any hassle.

In summary, the AKAI APC 40 MK2 Controller Stand is a superb product that combines ergonomic design, stability, and portability. It offers a comfortable and accessible platform for your APC 40 MK2 controller, making it an ideal choice for DJs, musicians, and producers who value convenience and performance.

Notes: The AKAI APC 40 MK2 Controller Stand is a highly versatile and practical accessory designed specifically for the APC 40 MK2 MIDI controller. This stand offers a host of features that make it an excellent choice for DJs, musicians, and producers who require an ergonomic, stable, and portable solution.

The stand is carefully crafted to provide an optimal working position for the controller, allowing for comfortable access to all knobs, faders, and buttons. Its ergonomic design ensures that you can use the controller for extended periods without straining your wrists or arms.

Stability is a key feature of the AKAI APC 40 MK2 Controller Stand. It is built with a sturdy and durable construction, ensuring that your controller remains securely in place during intense performances or studio sessions. You can confidently engage with the controls, knowing that the stand will provide a reliable platform.

Additionally, this stand excels in terms of portability. It features a lightweight and compact design, making it easy to transport from one location to another. Whether you’re going to a live gig, a studio session, or simply moving between different workspaces, the stand’s portability ensures that you can conveniently take it with you without any hassle.

In summary, the AKAI APC 40 MK2 Controller Stand is a superb product that combines ergonomic design, stability, and portability. It offers a comfortable and accessible platform for your APC 40 MK2 controller, making it an ideal choice for DJs, musicians, and producers who value convenience and performance.

Notes: This specially designed stand for Elektron Digitakt / Digitone is attached from below to the equipment’s chassis, utilizing its universal VESA mounting points, enabling the use of the equipment in a much more ergonomic inclined position.

By swapping the position of the feet, it is possible to use the equipment in two different positions: lying down and upright.

It can be set up in a matter of seconds and weighs just a few grams.

Each stand features a groove to accommodate silicone feet to prevent the equipment from slipping or scratching.

Includes both side stands, screws for installation, and silicone feet.

Notes: One of Native's latest creations has its ergonomic stand ready for studying.

Now you can have greater comfort, view your screen and all the equipment thanks to this custom-designed stand.

At the base, there are 3m rubber feet so that the equipment does not move at any time.

Weight: 0.1 kg
Dimensions: 5 × 5 × 1 cm

Notes: The latest addition to the Roland family has its exclusive stand.

Specially designed for the Roland MC-707s.

Taking advantage of the shape of its cabinet to securely hold the equipment.

Achieving a very comfortable position during use.

These stands are lightweight, detachable, and take up very little space, perfect for live performers.

In the studio, they save space and improve the working position.

All CoverUp stands feature 3M rubber feet to prevent scratching or slipping.

With its ergonomic design, this stand provides exceptional comfort during use. Its thoughtful construction securely holds the Roland MC-707s, ensuring stability and convenience. Whether you're performing live or working in the studio, this stand offers the advantages of portability and space efficiency. The lightweight and detachable design make it easy to transport and set up wherever you go. Moreover, its compact size allows for convenient storage. Additionally, the high-quality rubber feet provide excellent grip and protect your equipment from scratches. Invest in this ergonomic stand from COVERUP for a comfortable and hassle-free experience while using your Roland MC-707s.

Notes: Durability is a key feature of this stand. We understand the demands of a busy studio environment, and we've built this stand to withstand the test of time. Its sturdy construction ensures stability and reliability, providing a secure base for your equipment. This way, you can focus on creating music with confidence, knowing that your gear is well-supported.

At the core of CoverUp's production process is the use of recycled sticky woods. By repurposing and transforming these materials into an innovative stand, we give new life to what was once considered waste. With this sustainable approach, we not only reduce the strain on natural resources but also promote a circular economy, where materials are reused and repurposed to minimize waste.

Beyond its practicality, the Stand adds a touch of elegance to your studio setup. Its sleek design and natural wood texture provide a visually appealing backdrop for your synth, elevating the overall aesthetics of your workspace. The stand seamlessly integrates with any decor style, allowing you to create a studio environment that inspires your creativity.

Keep your studio organized and optimized for productivity with the Stand. Its compact footprint and efficient design ensure that your workspace remains clutter-free, giving you the freedom to focus on your music. With everything neatly organized and within reach, you can streamline your production process and unleash your artistic potential.

Upgrade your music production setup with the Stand. Experience the perfect blend of ergonomic design, durability, and sustainability. By choosing this stand, you're not only investing in a high-quality product but also making a positive impact on the environment. Embrace the future of music production with this exceptional stand that combines functionality with sustainability.

Notes: Durability is a key feature of this stand. We understand the demands of a busy studio environment, and we've built this stand to withstand the test of time. Its sturdy construction ensures stability and reliability, providing a secure base for your equipment. This way, you can focus on creating music with confidence, knowing that your gear is well-supported.

At the core of CoverUp's production process is the use of recycled sticky woods. By repurposing and transforming these materials into an innovative stand, we give new life to what was once considered waste. With this sustainable approach, we not only reduce the strain on natural resources but also promote a circular economy, where materials are reused and repurposed to minimize waste.

Beyond its practicality, the Stand adds a touch of elegance to your studio setup. Its sleek design and natural wood texture provide a visually appealing backdrop for your synth, elevating the overall aesthetics of your workspace. The stand seamlessly integrates with any decor style, allowing you to create a studio environment that inspires your creativity.

Keep your studio organized and optimized for productivity with the Stand. Its compact footprint and efficient design ensure that your workspace remains clutter-free, giving you the freedom to focus on your music. With everything neatly organized and within reach, you can streamline your production process and unleash your artistic potential.

Upgrade your music production setup with the Stand. Experience the perfect blend of ergonomic design, durability, and sustainability. By choosing this stand, you're not only investing in a high-quality product but also making a positive impact on the environment. Embrace the future of music production with this exceptional stand that combines functionality with sustainability.

Notes: The latest addition to the Roland TR family has its exclusive stand.

Specially designed for the Roland TR-8s.

Taking advantage of the shape of its cabinet to securely hold the equipment.

Achieving a very comfortable position during use.

These stands are lightweight, detachable, and take up very little space, perfect for live performers.

In the studio, they save space and improve the working position.

All CoverUp stands feature 3M rubber feet to prevent scratching or slipping.

With its ergonomic design, this stand provides exceptional comfort during use. Its thoughtful construction securely holds the Roland TR-8s, ensuring stability and convenience. Whether you're performing live or working in the studio, this stand offers the advantages of portability and space efficiency. The lightweight and detachable design make it easy to transport and set up wherever you go. Moreover, its compact size allows for convenient storage. Additionally, the high-quality rubber feet provide excellent grip and protect your equipment from scratches. Invest in this ergonomic stand from COVERUP for a comfortable and hassle-free experience while using your Roland TR-8s.

Weight: 0,5 kg
Dimensions: 10 × 10 × 10 cm

Models: TR8S, MC707

Notes: This ergonomic stand model is specially designed for the new sampler/sequencer by Teenage Engineering. To achieve a more comfortable use of this beautiful machine, we decided to offer two possible positions: Studio and Live.

The Studio version has a higher angle and elevation, allowing it to be placed in our setup without obstructing rear connectors of other equipment. The Live version has a lower angle, and the front of the EP-133 remains at the level of the supporting surface. This facilitates its use while standing.

Both versions have silicone pads on their bottom to prevent slipping or scratching the surface where it rests. The wooden rods that connect both sides of the stand provide rigidity and stability to the assembly.

Notes: CoverUp designed two ergonomic support models for the OP-1: Studio and Live versions.

The Studio support has a higher incline and is elevated. This is ideal for seated use, improving screen visibility, and the height allows it to be positioned even behind other desktop equipment.

The Live version of this support has a slight incline and is intended for use in a live or standing situation.

Both supports have rubber feet to prevent slipping and are adorned with two well-known characters that appear on the OP-1.

***Please note: The OP-1 is not included, it is shown in the photos for demonstration purposes only. ***

Notes: CoverUp designed two ergonomic support models for the OP-1: Studio and Live versions.

The Studio support has a higher incline and is elevated. This is ideal for seated use, improving screen visibility, and the height allows it to be positioned even behind other desktop equipment.

The Live version of this support has a slight incline and is intended for use in a live or standing situation.

Both supports have rubber feet to prevent slipping and are adorned with two well-known characters that appear on the OP-1.

Notes: The well-known Pocket Operators are essentially bare electronic boards, with the components visible.

To protect your Pocket Operator and make its use more comfortable, CoverUp offer this case, which includes a front part, a back cover, and the buttons.

This case is compatible with the entire Pocket Operator series, and its assembly is very simple.

Notes: External footswitch. Accessory for Sidekick JR.

Use the XT footswitch to control the operation of the modulation section of the Sidekick JR independently. Engage or true bypass the modulation effect.

XT footswitch bypasses the onboard modulation operation assign toggle switch of the Sidekick JR.

Connect to the XT jack input of the pedal.

Passive operation - no power needed for the XT footswitch to operate properly - use standard TS instrument jacks / cable only.

XT footswitch function is not affected by the power-up bypass/engage preset function of the onboard footswitches of Sidekick JR.

Dimensions (W x L x H) : 54 x 51 x 49 mm
Weight 0.91 kg
Made in Greece

Notes: The Cre8audio NiftyCASE BigEARS is the simplest solution for expanding your modular Eurorack synthesizer, by allowing you to connect two Cre8audio NiftyCASE's together seamlessly. Elegant and classy, the BigEARS is made from wood to match the design and aesthetic of the NiftyCASE to create a cohesive look, while providing an immense amount of stability and rigidity. When two cases are connected, you'll have a huge 168HP of rack space to add to your collection that can unlock your true creative potential.

Notes: Custom engineered in the UK for the 1010 Music Blackbox Sampler & Bluebox Mixer & Recorder, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.

Notes: Engineered specifically for the Ableton Push 2 controller. Tough but lightweight polycarbonate shell protects from damaging elements such as smoke, dust, liquid and accidental impact.

Precision moulded for an exact fit whilst accommodating cables, your Push 2 can sit ready for operation. Slides straight into a flight case or controller bag ready for transportation. Shields delicate controls from damage in the studio, in transit and on stage.

Notes: Introducing the ultimate guardian for your prized Ableton Push 3 - the Decksaver cover! Unlock the full potential of your music production powerhouse while ensuring it remains in pristine condition for years to come. Crafted with meticulous precision and unrivalled expertise, our lid is designed to complement the brilliance of your Ableton Push 3.

The Ableton Push 3 is more than just a controller; it's a gateway to a world of limitless creativity. Its seamless integration with Ableton Live empowers you to bring your musical ideas to life with unparalleled ease. However, with great innovation comes the responsibility to protect your investment from the challenges of the studio and the stage.

This Decksaver cover is built to provide an impenetrable shield against dust, dirt, liquid spills, and accidental knocks. Made from premium-quality polycarbonate (to our own unique recipe), this cover ensures your Ableton Push 3 remains immaculate and free from wear and tear, so you can focus solely on the creative duties of making music.

Designed with precision, the custom-fit mould embraces your Push 3 like a second skin. Whether you're performing live, producing in the studio, or taking your music on the road, our cover ensures your creative flow remains uninterrupted.

As pioneers in protective solutions for musical gear, Decksaver takes immense pride in our stringent quality standards. The design for the Ableton Push 3 Decksaver cover has been rigorously tested to meet the highest level of fit, durability and reliability, ensuring it withstands the demands of your musical journey.

Join the league of top-tier music producers and DJs who trust Decksaver to safeguard their musical instruments. Elevate your music production experience with the confidence that your Ableton Push 3 is cocooned in some of the finest protection available.

Seize the opportunity to explore new sonic dimensions and compose your musical opus without worry. Choose Decksaver, choose excellence, and choose to take your music production to new heights with the Ableton Push 3 Decksaver cover.

Your journey to sonic greatness starts here!

Dimensions

Weight: 0.7 kg
Length: 38.8 cm
Width: 32.5 cm
Height: 4.5 cm

Material: Smoked clear polycarbonate.

Notes: Custom engineered for the Akai MPC Live and MPC Touch. This super durable polycarbonate shell protects your controller from damaging elements such as smoke, dust, liquids and impact. Precision trimmed for perfect fit whilst accommodating cables, the MPC Live/Touch can sit ready for operation. Slides straight into a flight case or controller bag, ideal for transportation. Shields delicate faders, controls and internal components from damage at home, on the road or in the club.

Notes: The APC40 MK2 has solidified its reputation as a cutting-edge MIDI controller, admired by musicians for its seamless integration with Ableton Live and advanced features. Its intuitive workflow, extensive control options, and enhanced performance capabilities make it an indispensable tool for DJs, producers, and live performers alike.

Understanding the importance he of safeguarding this valuable piece of equipment, we have developed a tailored solution: the Decksaver cover. Designed with meticulous precision, our custom-molded polycarbonate cover is crafted to perfectly fit the contours of the APC40 MK2, ensuring optimal protection.

Our Decksaver cover offers comprehensive safeguarding against a range of potential hazards, including dust, spills, and accidental impacts. Constructed from high-quality polycarbonate material, our cover provides exceptional durability, ensuring the longevity of your APC40 MK2.

With a Decksaver cover adorning your APC40 MK2, you can perform with confidence in any setting. Whether you're on stage, in the studio, or on the move, our cover delivers reliable protection, preserving the pristine condition of your MIDI controller. Trust in Decksaver to provide the ultimate shield for your valuable APC40 MK2, ensuring its longevity and uninterrupted performance for years to come. Let your creativity thrive, knowing that your APC40 MK2 is safeguarded by the unparalleled protection of Decksaver.

Key features:
Patented smoked/clear transparency, unique to Decksaver.
Protects against dust, liquid and impacts.
Shields vulnerable faders, switches and knobs during transportation.
Low profile design enables compatibility with most flight cases and travel bags.

Dimensions:
Weight 0.42 kg
Length 42.6 cm
Width 25.6 cm
Height 2.6 cm

Notes: The AKAI APC64 is a dynamic instrument in the realm of music production and live performance, playing a critical role in numerous artists' setups. To protect such a vital piece of equipment, this Decksaver cover, made from sturdy polycarbonate, presents the perfect solution. It is precisely crafted to shield your APC64 from dust, liquid spills, and unexpected knocks.

Expertly designed for the AKAI APC64, this Decksaver cover ensures an impeccable fit, accommodating all cables and connections. This meticulous attention to detail allows the cover to be smoothly slotted into a flight case or controller bag, ideal for those constantly on the move. Whether you're moving your setup to a performance, operating in a studio, or engaging in live shows, this cover offers superior protection, ensuring your APC64's buttons, pads, and knobs are defended against the challenges of daily use.

Choosing this Decksaver cover for your AKAI APC64 is more than a sensible decision; it signifies a dedication to preserving the longevity and impeccable condition of your cherished equipment.

Dimensions
Weight: 0.365 kg
Length: 37.7 cm
Width: 27.5 cm
Height: 2.7 cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: Units like the Akai MPC Live 2 sequencer are music-production powerhouses - they are the fulcrum of your setup and cannot go unprotected.

Our super durable polycarbonate shell offers protection from dust, spillages and accidental impact.

Each Decksaver is trimmed precisely to fit, leaving cables in place. Slides straight into a flight case or controller bag, perfect for transportation.

Shields delicate controls and internal components from damage on the road, at home or in the club.

Key features:

Patented smoked/clear transparency, unique to Decksaver.
Protects against dust, liquid and impacts.
Shields vulnerable faders, pads and knobs during transportation.
Low profile design enables compatibility with most flight cases and travel bags.

Fits:

MPC Live II Beatclub Edition
MPC Live II Timbaland Edition

Dimensions:

Weight 0.850kgs
Length 41.60cm
Width 24.80cm
Height 3.00cm

Notes: Units like the Akai MPC One sequencer are music-production powerhouses, they are the fulcrum of your setup and simply cannot go unprotected. This super durable polycarbonate shell offers protection from dust, spillages and accidental impact. Each Decksaver is trimmed precisely to fit, leaving cables in place. The Akai MPC One Standalone Music Production Controller Cover slides straight into a flight case or controller bag, perfect for transportation, and it also shields delicate controls and internal components from damage on the road, at home or in the club.

DIMENSIONS:

Weight: 0.76kg
Length: 28.2cm
Width: 28cm
Height: 3.9cm

Notes: Introducing the Decksaver cover, meticulously crafted for the Allen & Heath CQ-12T mixer. This cover, engineered with exacting precision and made from superior-grade material, offers a bespoke-fit solution that is unrivalled. It provides your CQ-12T with unparalleled defence against common hazards like dust, liquid spills, and accidental knocks or impacts.

Understanding the significance of your mixer as a vital component of your audio setup, this Decksaver cover has been designed to ensure your CQ-12T remains in pristine condition, regardless of the setting. Whether in the studio, at a live performance, or during transportation, the cover acts as a reliable shield, preserving the functionality and aesthetics of your mixer.

Its sleek, transparent design not only delivers robust protection but also showcases the sophisticated build of your CQ-12T, integrating flawlessly with its professional appearance. The precise fit ensures that every knob, fader, screen, and input is covered, yet remains easily accessible for quick setups and teardowns. This design principle means that you don't have to choose between safety and style.

Furthermore, the Decksaver cover for the CQ-12T is lightweight and durable, making it an ideal accessory for DJs on the move. It adds an additional layer of security against the challenges of travel and frequent use, protecting your investment from the wear and tear of the road.

With this Decksaver cover, you acquire not just a protective measure, but a declaration of professionalism. It reflects your dedication to quality and the importance you place on keeping your equipment in its best condition. Embrace the peace of mind and confidence that comes with knowing your Allen & Heath CQ-12T is well-protected, allowing you to concentrate on what you do best; creating and performing music.

Weight: 0.151 kg
Length: 27.4 cm
Width: 23.7 cm
Height: 4 cm

Material: Smoked clear polycarbonate.

Warning: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: The Allen & Heath CQ-18T has become a highly coveted device to protect, owing to its versatile features in managing mixing, recording, live performance, and digital audio workstation (DAW) integration. Its multifunctional nature distinguishes it as a preferred option for audio professionals.

Decksaver's range of professional mixer covers is designed to provide audio engineers with the confidence and peace of mind necessary in any environment.

Specifically conceived and crafted in the UK for the Allen & Heath CQ-18T, this Decksaver cover is manufactured from polycarbonate-a robust and transparent material precisely tailored to the exact specifications, achieving the perfect level of smoked clarity.

Each design is subject to rigorous testing to confirm it meets Decksaver's stringent standards, assuring you of its quality and dependability. The cover efficiently protects faders, buttons, knobs, and indicators from dust, spills, and unintended impacts, whilst preserving the integrity of your cables and settings.

Endorsed by industry experts and utilised by professionals, the Decksaver cover for the CQ-18T is the preferred selection for safeguarding your equipment, ensuring no compromise on functionality or aesthetics.

Dimensions

Weight: 0.194 kg
Length: 32.9 cm
Width: 23.8 cm
Height: 4.9 cm

Material: Smoked clear polycarbonate

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: Light Edition - still made from super durable polycarbonate but reaching you at a more affordable price. Engineered in the UK specifically for the Arturia Keystep 37 Keyboard Controller. Custom moulded to fit the contours of the unit whilst leaving USB connections in place, the MPK Mini MK2 can sit ready for operation. Super durable polycarbonate shell protects delicate keys during transportation and slides straight into a flight case or bag for maximum protection. Don't go losing your keys.

Notes: Custom engineered in the UK for the Arturia Keystep Pro Keyboard Controller, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.

Notes: Transparent protection for your gear. The Decksaver Arturia Microfreak Cover is a highly-durable protective cover constructed from a polycarbonate shell for optimal protection. The cover is custom moulded to fit the shape of the Arturia Microfreak and is finished with a high-quality smoke/clear sheen.

The cover is ideal for travelling, helping to protect your Microfreak from superficial damage. The cover protects from dust, liquid and accidental impact damage, whilst accommodating cables.

Please note: The Arturia Microfreak Synthesiser is not included in this purchase. It is shown for demonstration purposes only.

Dimensions (LxWxH): 31.5 x 23.8 x 8.5 cm

Weight: 0.35 kg

Notes: The Decksaver Ashun Sound Machines Hydrasynth Desktop Cover is constructed from a polycarbonate shell for optimal protection. The cover is custom moulded to fit the shape of the Hydrasynth, and comes complete with a high-quality smoke/clear sheen. This is the ultimate choice for anyone wishing to protect their synthesizer from dirt, dust, and superficial damage. It also provides easy access to inputs and outputs at all times.

Please note: The Ashun Sound Machines Hydrasynth Desktop Synthesiser is not included in the purchase. It is shown for demonstration purposes only.

Dimensions:
Length: 44.3 cm
Width: 23.8 cm
Height: 6.5 cm

Notes: Ashun Sound Machines (or more commonly known as ASM) created shockwaves when they released their original Hydrasynth. Now, they have released its little brother - the ASM Hydrasynth Explorer! Even though smaller in size, it still packs the same punch.

The ASM Hydrasynth Explorer features a 37-note mid-sized PolyTouchr keybed and a plethora of knobs and buttons for its oscillators, waveform, sound presets and more. With all of these features, there is always the danger of dust, liquid and accidental impact. But not to worry! After high demand from a vast amount of Hydrasynth Explorer owners, we have made a Decksaver for their precious keyboard.

THis Hydrasynth Explorer cover is designed and custom-moulded to perfectly fit whilst accommodating cables, meaning your unit can sit ready for operation whilst being fully protected. The super durable polycarbonate shell features extreme durability and offers the highest degree of protection.

With its easy portability and backpackable size, no matter where you are, you will never have to worry about your Explorer getting damaged with this Decksaver cover.

Notes: The tools we use to compose and produce music are dear to our hearts.

Dust, liquid and accidental impact have taken many a good modular synth down over the years - this is where Decksaver steps in.

Precision designed and trimmed for a perfect fit, whilst still accommodating cables, the Eurorack Go can sit ready for operation.

This cover is designed with additional clearance for patch cables, meaning you can leave your cables in place when travelling or protecting your modular setup in the studio.

Shields delicate controls and internal components from damage at home, on the road and on stage.

Dimensions

Weight: 1.35kg
Length: 72.6cm
Width: 31.2cm
Height: 8.2cm

Notes: The Behringer Flow 8, revered for its cutting-edge features and unparalleled versatility in audio mixing, has swiftly established itself as a cornerstone in the realm of sound production. Recognizing its indispensable role and in response to a resounding demand for reliable safeguarding, Decksaver are delighted to introduce the cover tailored for the Behringer Flow 8. Crafted with meticulous attention to detail using premium-grade polycarbonate, this cover is engineered to provide maximum protection to your Flow 8, shielding it from dust, liquid spills, and inadvertent impacts, thereby ensuring the longevity and peak performance of this exceptional mixer.

Precision-engineered to seamlessly conform to the unique contours of the Behringer Flow 8, this Decksaver cover assures a snug fit, enveloping all essential components including faders, knobs, and displays, while facilitating convenient access to all necessary connections. This thoughtful design aspect is essential for audio enthusiasts and professionals alike, who demand both robust protection and effortless accessibility for setup and breakdown. Whether in a bustling live venue, a bustling studio environment, or during storage, this cover serves as a steadfast guardian, preserving both the functional integrity and aesthetic appeal of your Flow 8.

Selecting this Decksaver cover for your Behringer Flow 8 transcends mere protection; it signifies a commitment to nurturing and maintaining a pivotal piece of audio equipment. Esteemed and coveted by industry experts, this cover stands as an indispensable asset for anyone dedicated to upholding their Behringer Flow 8 in immaculate condition, primed for every mixing endeavour and creative pursuit.

Weight: 0.125 kg
Length: 23.5 cm
Width: 17.5 cm
Height: 3.2 cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: The instruments we employ for crafting and bringing music to life hold a special place in our hearts. Throughout the years, the relentless forces of dust, liquid spills, and unfortunate accidents have claimed the functionality of many cherished synthesizers. This is precisely where Decksaver steps in.

Meticulously designed to offer a flawless fit while accommodating cables, this Decksaver cover ensures that your Behringer Pro-800, K-2, Toro, Neutron, or PRO-1 synthesizer is always poised for action. It serves as a robust shield, safeguarding the intricate controls and delicate internal components of your instrument, whether it's in the comfort of your home, the creative confines of your studio, or the electrifying stage.

What sets this Behringer cover apart is the proprietary Soft-fit technology, which delivers an additional layer of protection to those susceptible wooden cheek panels that grace these exceptional synthesizers.

Fits:

K-2
Neutron
PRO-1
Toro
PRO-800

Dimensions:

Weight: 0.75 kg
Length: 43.6 cm
Width: 14.8 cm
Height: 6.6 cm

Notes: Decksaver understand the sentimental value we attach to the tools we use to compose and produce music. Dust, liquid spills, and accidental impact have been known to wreak havoc on many beloved synthesizers over the years. That's where Decksaver steps in; providing an unrivalled shield for your cherished musical devices.

Crafted with precision, the Decksaver cover is designed to fit your Behringer Model-D (or Solina, Wasp Deluxe or Cat) like a glove, ensuring a perfect fit while accommodating cables. With the cover in place, your synthesizer can sit ready for operation, protected from the elements that can compromise its performance. No longer will you have to worry about dust settling on your precious instrument or the potential damage caused by spills - Decksaver cover has you covered.

Not only does the Decksaver cover offer external protection, but it also goes the extra mile to shield the delicate controls and internal components of your device from potential damage. Every knob, switch, and connector is safeguarded, allowing you to focus on creating music without any concerns about the longevity and functionality of your synth. With the Decksaver cover, your Model-D remains in pristine condition, ready to deliver its analogue magic whenever inspiration strikes.

This synthesizer cover is equipped with Soft-fit technology, providing an additional layer of protection for the vulnerable wooden cheek panels that often adorn synthesizers. We understand the importance of preserving every aspect of your instrument's aesthetics, and this cover ensures that these panels remain intact and free from scratches or other damage.

Whether you're at home, in the studio, or performing on stage, the Decksaver cover for your synth offers reliable defence. Its durable construction shields your synth from accidental impacts, protecting it from the rigors of everyday use and the demands of live performances. The lightweight design of the cover makes it easy to transport, ensuring that your Model-D remains unscathed during travel.

Enjoy seamless access to all the essential features and ports of your Behringer with the Decksaver cover. Adjust parameters, tweak filters, and explore the sonic possibilities of your synth without any hindrance. The Decksaver cover is designed to integrate seamlessly into your workflow, providing optimal protection without compromising functionality.

Preserve the heart and soul of your music-making journey by investing in the Decksaver cover for your Behringer Model-D synthesizer. Let your creativity soar, knowing that your beloved synth is shielded by the most reliable defence available. With the Decksaver cover, you can confidently delve into the sonic realms of analogue synthesis, knowing that your gear is safeguarded from dust, spills, and accidental impacts.

Protect your musical companion with the Decksaver cover and experience the peace of mind that comes from owning a Behringer device preserved by the ultimate shield. Elevate your sound and ensure the longevity of your beloved synth with the unbeatable protection of the Decksaver cover.

Fits:

Model D
Wasp Deluxe
CAT
Solina

Dimensions

Weight: 0.72 kg
Length: 38.2 cm
Width: 14.9 cm
Height: 6.4 cm

Notes: Transparent protection for your gear. The Decksaver Behringer RD-8 Cover is a highly-durable protective cover constructed from a polycarbonate shell for optimal protection. The cover is custom moulded to fit the shape of the Behringer RD-8 and is finished with a high-quality smoke/clear sheen.

The cover is ideal for travelling, helping to protect your RD-8 from superficial damage. The cover protects from dust, liquid and accidental impact damage, whilst accommodating cables.

Please note: The Behringer RD-8 Drum Machine is not included in this purchase. It is shown for demonstration purposes only.

Dimensions (LxWxH): 49.3 x 26 x 3.9 cm
Weight: 0.535 kg

Notes: In 2021, Behringer released one of their most anticipated products - the Behringer RD-9. Inspired by the legendary Roland TR-909 drum machine, the machine boasts 58 buttons and 33 knobs, perfect for crafting your drum sequences to absolute excellence.

Commonly seen in producers' studios when they are crafting beats and instrumentals, it is a highly used piece of equipment within the music industry. To protect those creative ideas evolving from your drum machine, we designed and manufactured a hard shell protective cover!

The Decksaver Behringer RD-9 cover is custom-moulded to perfectly fit whilst accommodating cables, meaning the RD-9 can sit ready for operation while being fully protected. This super durable polycarbonate shell features extreme durability and offers the highest degree of protection.

You will never have to worry about your Behringer RD-9 getting damaged with your Decksaver cover!

Weight: 1kg
Length: 48.2cm
Width: 26.1cm
Height: 4cm

Material: Smoked clear polycarbonate.

Notes: Transparent protection for your gear. The Decksaver Behringer TD-3 Cover is a highly-durable protective cover constructed from a polycarbonate shell for optimal protection. The cover is custom moulded to fit the shape of the Behringer TD-3 and is finished with a high-quality smoke/clear sheen.

The cover is ideal for travelling, helping to protect your TD-3 from superficial damage. The cover protects from dust, liquid and accidental impact damage, whilst accommodating cables.

Please note: The Behringer TD-3 is not included in this purchase. It is shown for demonstration purposes only.

Dimensions (LxWxH): 31 x 16.6 x 3.7 cm
Weight: 0.27 kg

Notes: Since its beginning, Behringer has entered the music equipment world with a bang, constantly releasing desirable and value-led gear across the music spectrum such as DJ mixers, synthesisers, drum machines and interfaces - the list goes on.

Close to the top of Decksaver's customer request list, the X-Touch is a universal remote control for DAWs, which allows you to control and fine-tune any track or recording through the use of its 9 fully automated and touch-sensitive 100mm motorized faders.

While the X-Touch might be the perfect controller for your Ableton, Logic or the like, it doesn't have the perfect protection against damage and any other bad mishaps.

To fix this problem Decksaver have carefully crafted and manufactured right here in the UK, a cover to protect the Behringer X-Touch. This super durable polycarbonate lid features extreme durability and offers the highest degree of protection against spills, dust and accidental impact.

Weight: 1.1kg
Length: 45.4cm
Width: 31cm
Height: 4.4cm

Material: Smoked clear polycarbonate

Notes: Have you ever considered how much you rely on your hardware? Units such as the Atem Mini Extreme sit at the very heart of your setup and without them, content cannot be captured. Dust, liquid and accidental impact have taken many a good unit down over the years - this is where Decksaver steps in. Precision trimmed for perfect fit whilst accommodating cables, Atem Mini Extreme can sit ready for operation- it slides straight into a flight or soft case for maximum protection during transportation. The Blackmagic ATEM Mini Extreme & ATEM Mini Extreme ISO Switcher cover shields delicate controls and internal components from damage at home, on the road and in the studio.

Length: 37.5cm
Width: 14.1cm
Height: 2cm
Material: Smoked polycarbonate

Notes: It would be hard to talk about the best looping equipment without mentioning Boss and its RC-505 series. Having previously already been the industry staple for looping stations with its RC-505, Boss is back at it again with the five-track follow up, the RC-505MK2.

The RC-505MK2 relies very heavily on its surface pads to record, play and loop tracks. Anything that's designed to be pushed, slid or turned is susceptible to damage from dust, spills and impacts.

This is why the Decksaver Boss 505-MK2 cover has been created.

Designed and crafted right here in the UK to perfectly fit the contours of this exciting unit, Decksaver have gone through years of development to be able to create the perfect cover to protect the RC-505MK2. This super durable polycarbonate lids fit like a glove and feature extreme durability and the highest degree of protection.

Not only that, but because of the small size of the unit, we specifically crafted the cover so that both items slip easily into your backpack with the minimum of space and fuss.

No matter where you are, Decksaver has your 505-MK2 covered.

Weight: 0.647kg
Length: 42.5cm
Width: 23.5cm
Height: 3.9cm

Material: Smoked clear polycarbonate.

Notes: Guitar effects pedals are becoming more and more popular with DJs and producers with their ability to trigger the right noise at exactly the right time.

And if you're a guitarist with a taste for effects pedals, chances are you own or have played with or used a legendary Boss Stompbox at some point.

These units are are the world's best selling and can be found everywhere and cover a dazzling amount of effects. This is where Decksaver steps in.

Whether you use your Boss pedals for processing other instruments, or even for your guitar, any unit that's regularly stomped on can suffer issues - and that's before we consider other stressors such as damage to switches or knobs during travel,or from dust, fluids or accidental impact.

These wonderful devices deserve care during downtime with the kind of protection only Decksaver covers can provide.

Precision moulded in-house to ensure a perfect fit whilst accommodating cables, our cover shields delicate controls and internal components from damage at home, on the road and in the studio.

Fits all the Boss single pedal Stompboxes.

Dimensions

Weight: 0.16kg
Length: 13.5cm
Width: 8.4cm
Height: 3.8cm

Notes: Conductive Labs have turned complex music theory into a killer synthesizer-jamming MIDI controller with The NDLR.

With four parts that can play up to 8 synths, it's possible to make fantastic electronic music with this device.

These tools we use to compose and produce music are dear to our hearts. Dust, liquid and accidental impact have taken many a good unit down over the years - this is where Decksaver steps in.

Designed exclusively for perfect fit, whilst still accommodating cables, your NDLR arpeggiator can sit ready for operation.

Slides straight into a flight or soft case, or rucksack for maximum protection during transportation.

Shields delicate controls, ports and internal components from damage at home, on the road and on stage.

Dimensions

Weight: 0.399kg
Length: 23.2cm
Width: 15.9cm
Height: 3.4cm

Notes: ***B-STOCK: Box opened, product in perfect working order***


Conductive Labs have turned complex music theory into a killer synthesizer-jamming MIDI controller with The NDLR.

With four parts that can play up to 8 synths, it's possible to make fantastic electronic music with this device.

These tools we use to compose and produce music are dear to our hearts. Dust, liquid and accidental impact have taken many a good unit down over the years - this is where Decksaver steps in.

Designed exclusively for perfect fit, whilst still accommodating cables, your NDLR arpeggiator can sit ready for operation.

Slides straight into a flight or soft case, or rucksack for maximum protection during transportation.

Shields delicate controls, ports and internal components from damage at home, on the road and on stage.

Dimensions

Weight: 0.399kg
Length: 23.2cm
Width: 15.9cm
Height: 3.4cm

Notes: Discover the ultimate shield for your fiery soundscapes - the Decksaver cover for Dreadbox Hypnosis, Hades & Erebus synths!

Ignite your music-making experience while preserving the infernal brilliance of these analog synthesizers. Carefully designed and expertly crafted, this Decksaver cover is the guardian your Hades & Erebus devices deserve, ensuring they remain at the peak of their sonic power.

The Dreadbox Hypnosis, Hades & Erebus, a dynamic trio of analog synthesizers from the good people at Dreadbox, captivates musicians with their blazing tones and otherworldly capabilities. As you immerse yourself in their scorching depths, safeguarding them from dust, spills, and unexpected mishaps becomes essential, preserving their fiery passion for your musical journey.

This Decksaver lid, forged from top-tier polycarbonate (made to Decksaver's own special recipe), forms an unyielding barrier against the elements, keeping your synths untouched by time's grasp. Embrace the radiance of your instruments, free from wear and tear, and unleash the sonic flames without restraint.

Designed with precision, the custom-fit mold cradles your Dreadbox devices like divine protection, granting easy access to all controls and connectors. Whether you're forging scorching melodies in your studio or unleashing infernos on stage, this Decksaver cover guards your synths through every musical incantation.

Embrace the guarantee of perfection with Decksaver's unwavering commitment to quality. Each Dreadbox Decksaver cover undergoes rigorous testing, ensuring unparalleled durability and reliability throughout your fiery musical conquests.

Join the league of music alchemists who trust Decksaver to preserve their instruments. Elevate your musical inferno, knowing that your devices are shielded by the finest cover.

Set ablaze the world of music with the power of your Dreadbox devices. Choose Decksaver, choose fire and fury, and choose to embark on a musical journey that transcends realms with the Dreadbox Hypnosis, Hades & Erebus Decksaver cover.

Elevate your passion for music and safeguard the blaze of your Dreadbox synths in style - your musical odyssey of infernal delight awaits!

Key features:

Patented smoked/clear transparency, unique to Decksaver.
Protects against dust, liquid and impacts.
Shields vulnerable faders, switches and knobs during transportation.

Fits:

Hades
Erebus
Hypnosis (DIY kit)

Dimensions:

Weight: 0.39 kg
Length: 22.1 cm
Width: 13.4 cm
Height: 5.8 cm

Notes: Introducing the perfect safeguard for your enchanting Dreadbox Nymphes - the Decksaver cover!

Awaken the magic within your synthesizer while ensuring it remains protected from the elements that may cast a spell on your musical journey. Meticulously designed and crafted, this Decksaver cover is the guardian your Nymphes deserves, preserving its ethereal charm and pristine condition.

The Dreadbox Nymphes, a symbol of sonic sorcery, entices musicians and sound alchemists with its alluring analog soundscapes and spellbinding capabilities. As you explore its mystical depths, it becomes paramount to shield it from dust, spills, and unforeseen mishaps, preserving its magic for years to come.

This lid, constructed from top-quality polycarbonate, stands as a formidable barrier against the elements, ensuring your Nymphes remains untouched by the passage of time. Embrace the beauty of your instrument, free from scratches and wear, and unleash its full potential without restraint.

Designed with precision, the custom-fit mold fits your Dreadbox Nymphes like a sacred seal, granting easy access to all controls and connectors. Whether you're weaving sonic spells in your studio or conjuring enchanting melodies on stage, this Decksaver cover protects your Nymphes throughout your musical incantations.

Join the ranks of music conjurers who trust Decksaver to preserve their instruments. Elevate your musical sorcery, knowing that your Dreadbox Nymphes is under the watchful protection of the finest cover.

Set your musical spirit free with the power of your Nymphes. Choose Decksaver, choose enchantment, and choose to embark on a musical quest that transcends realms with the Dreadbox Nymphes Decksaver cover.

Elevate your passion for music and safeguard the magic of your Nymphes in style - your musical odyssey of enchantment awaits!

Dimensions

Weight: 0.38 kg
Length: 24.6 cm
Width: 12.9 cm
Height: 4.1 cm

Material: Smoked clear polycarbonate.

Notes: The tools we use to compose and produce music are dear to our hearts.

Boutique synthesizer brand Dreadbox are racking up an awesome range of electronic gear.

Dust, liquid and accidental impact have taken many a good unit down over the years - this is where Decksaver steps in.

Precision trimmed for perfect fit whilst accommodating cables, your Typhon can sit ready for operation.

Slides straight into a flight or soft case for maximum protection during transportation.

Shields delicate controls and internal components from damage at home, on the road and onstage.

Dimensions

Weight: 0.425kg
Length: 23.4cm
Width: 13.4cm
Height: 3.4cm

Notes: Custom engineered in the UK for the Empress Effects Zoia Effects Pedal, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.