100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Back Catalogue: All Genres

Inicio  Back Catalogue  

All Genres

Options
Artículos del 1 al 50 de 10,296 en la página 1 de 206
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z TODO
1  2  3  ...  206  »
Cat: 769782 Rel: 20 Mar 20
 
eurorack enclosure case
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod34X is 34HP wide and has extra room to fit even the deepest modules (2.16" / 55mm of available module depth). The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

This Pod requires a power brick (not included).

Or, if you already have a Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain power supplies.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. The power supply can handle up to 1.4A of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered)

Each Pod typically will house one or two modules, but three or more can be accommodated using a multi-power cable accessory.

Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Pods can even daisy- chain with the 4ms Row Power system making them a convenient outboard mini-skiff. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

34 HP Eurorack modular space
Standard M3 threaded holes
100% lightweight anodized aluminum
Built-in Power supply
Red, White, and Blue LED power indicators

Includes:
34HP Pod, black anodized aluminum
Extra deep (2.16"/55mm) fits virtually every Eurorack module
Built-in power supply with four Eurorack power headers
M3 x 8mm pan-head screws, stainless steel (10)
Adhesive rubber feet (4)
Does not include barrel cable or power brick
Power Supply:
Four 16-pin Eurorack power shrouded headers
+12V max 1.4A
-12V max 0.65A
+5V max 1.0A
Power input: Two barrel jacks for daisy-chaining
15V-20VDC, 2.1mm positive tip
Exterior dimensions:
Width: 177.3mm (6.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 34HP
Weight:
0.3 kg = 10 oz
Read more
MRP:$155.26 SAVE 13%
 3 in stock $134.65
Click for better price!
or call +44 20 7424 1960
quote 769782
Cat: 769789 Rel: 20 Mar 20
 
Eurorack enclosure case
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod64X is 64HP with 2.16" (55mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick, or a barrel cable to daisy-chain to a Pod or Row Power that's already powered.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. The power supply can handle up to 1.4A of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered)

Each Pod64X typically will house up to six modules, but more can be accommodated using a multi-power cable accessory.

Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Pods can even daisy- chain with the 4ms Row Power system making them a convenient outboard mini-skiff. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

64 HP of Eurorack modular space
Extra room for deep modules
Standard M3 threaded holes
100% lightweight anodized aluminum
Built-in Power supply
Red, White, and Blue LED power indicators

Includes:

64HP Pod, black anodized aluminum
Built-in power supply with six Eurorack power headers
Extra deep (2.16"/55mm) fits virtually every Eurorack module
M3 x 8mm pan-head screws, stainless steel (20)
Adhesive rubber feet (4)
Does not include barrel cable or power brick
Power Supply:

Four 16-pin Eurorack power shrouded headers
+12V max 1.4A
-12V max 0.67A
+5V max 1.0A
Power input: Two barrel jacks for daisy-chaining
15V-20VDC, 2.1mm positive tip
Exterior dimensions:
Width: 329.7mm (12.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 64HP
Weight:
0.5 kg = 17 oz
Read more
MRP:$224.69 SAVE 12%
! low stock $196.70
Click for better price!
or call +44 20 7424 1960
quote 769789
Cat: 769793 Rel: 20 Mar 20
 
eurorack enclosure case
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod64X Unpowered is 64HP with 2.16" (55mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

64 HP Eurorack modular space
Standard M3 threaded holes
100% lightweight anodized aluminum

Includes:

64HP Pod, black anodized aluminum
M3 x 8mm pan-head screws, stainless steel (20)
Adhesive rubber feet (4)
Unpowered: requires you to provide your own Eurorack power system
Exterior dimensions:
Width: 329.7mm (12.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 64HP
Weight:
0.42 kg = 14.9 oz
Read more
MRP:$103.51 SAVE 17%
 3 in stock $86.25
Click for better price!
or call +44 20 7424 1960
quote 769793
AKG
Cat: 761991 Rel: 18 Feb 20
 
foldable studio headphones with Bluetooth
Notes: Very nice headphones from one of our favourite brands. Comfortable closed-back, over-ear design for good isolation. Clear, accurate sound plus built-in mic and Bluetooth for on-the-go use with a phone.

Supplier's notes:
Whether you're an artist, engineer, podcaster or beat maker, you're always in creative mode. AKG K361-BT Professional Studio Headphones strike the perfect balance between studio-quality sound, Bluetooth functionality, plush comfort and a sleek, sturdy design that stands up to your mobile lifestyle.

K361-BTs are precision-engineered to reproduce natural, balanced audio in exceptional detail, so you can make more confident decisions when you're mixing and editing. They deliver the deepest bass and highest highs in their class, with a stunning frequency response of 15 Hz to 28 kHz. K361-BTs offer the convenience of switchable Bluetooth wireless and wired connectivity; a built-in microphone allows two-way Bluetooth communications. Plush, ergonomic earcups cradle your ears in supreme comfort - because once you hear how amazing your K361-BTs sound, you won't ever want to take them off.
Read more
MRP:$137.59 SAVE 25%
 3 in stock $102.93
AKG
Cat: 761994 Rel: 12 May 20
 
Bluetooth studio headphones
Notes: Great all-rounders from AKG, designed primarily for studio use but serving double duty as everyday headphones thanks to built-in Bluetooth streaming. Great sound and clean, stylish design.

Supplier's notes:
Whether you're an artist, engineer, podcaster, video editor or content producer, you're always in creative mode. AKG K371-BT Professional Studio Headphones strike the perfect balance between studio-quality sound, Bluetooth functionality, plush comfort and a sleek, sturdy design that stands up to your mobile lifestyle.

K371-BTs are precision-engineered to match AKG's Reference Response acoustic target to reproduce natural, balanced audio in extraordinary detail, so you can make more confident decisions when you're mixing and editing. They deliver deeper bass and higher highs than any other model in their class, with a stunning frequency response of 5 Hz to 40 kHz. K371-BTs offer the convenience of switchable Bluetooth wireless and wired connectivity; a built-in microphone allows two-way Bluetooth communications. Plush, ergonomic earcups cradle your ears in supreme comfortibecause once you hear how amazing your K371-BTs sound, you won't ever want to take them off.
Read more
 2 in stock $160.93
Click for better price!
or call +44 20 7424 1960
quote 761994
Zee
Cat: 773813 Rel: 23 Apr 20
 
Jigsaw puzzle
Notes: Welcome to My Nightmare is the first solo album by Alice Cooper, released in March 1975. It is Alice Cooper's first solo album (all previous Alice Cooper releases were band efforts), and his only album for the Atlantic Records label. Welcome to My Nightmare is a concept album. Played in sequence, the songs form a journey through the nightmares of a child named Steven. The cover artwork was created by Drew Struzan and Rolling Stone ranked it ninetieth on the list of the "Top 100 Album Covers Of All Time". This iconic artwork is now available as a 500 piece jigsaw puzzle printed on high quality board.
Read more
 1 in stock $15.25
Cat: 431971 Rel: 14 Jan 20
 
Multipurpose home studio mixer with FX
Notes: Big version of A&H's entry-level Zed series mixer. Originally intended for live applications but works very well as a studio mixer for hardware setups. A lot of mixer for your money.

Supplier's notes:
The Allen & Heath ZED-22FX mixer is ideal for groups who need to travel light. Featuring configurable USB audio input/output makes it easy to capture stereo recordings.

The ZED-22FX easily accommodates vocals, drums, guitar, bass and keys whilst also providing a dedicated FX bus and 16 internal time-delay effects, giving the whole mix extra ambience.

The ZED-22FX has an essential selection of 16 time-delay effects, designed for small groups who don't want to carry around an effects unit with their gear but who still want great quality FX at their gigs and on their recordings. Our DSP engineers worked hard, crafting and refining beautiful reverb algorithms to enhance every performance. These effects are available nowhere else at this price point, this quality and integration is only available from the ZED-FX. ZED effects are easily controlled using 3 buttons with 9 display LEDs. For example, the ideal delay time can be quickly tapped-in, or the perfect amount of reverb on the lead vocal can be dialled-in. There is one-stop navigation and editing - in fact, it's just as easy as using effects pedals. To alter effects parameters, the TAP button is held down and the up/down buttons pressed to adjust the specific parameter for that effect, for example, the decay length on PLATE, or the depth on CHORUS.

Based on the proven pre-amps from the hugely successful PA series, ZED-22FX has DuoPre pre-amps, which use a two stage design, with carefully controlled amounts of gain in each stage. When amplifying the signal from the XLR input, the gain range is huge - 69dB of range to be exact - and is very evenly distributed around the gain control, meaning better control of signal level. Most of the gain comes from the first stage, so unwanted noise is kept to a minimum. Line level signals are simply plugged into the second stage of the pre-amp by using the line input jack socket, which has the great advantage of less noise when using the line input and also matching to a higher input impedance.
Read more
 1 in stock $571.53
Click for better price!
or call +44 20 7424 1960
quote 431971
Cat: 781667 Rel: 01 May 20
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Brilliant new complete system based around ALM classics like Pamela's New Workout, Squid Salmple and Quaid Megaslope. Brilliantly creative setup. Full review coming soon.

Supplier's notes:
The system coupe is a modern modular groove box combing both digital and analog technologies. It features various sound sources, innovative pattern creation and sequencing, modulation, sampling, processing and integration with external equipment.

Use the Coupe as a creative tool to sketch new original musical ideas and phrases, an enjoyable persuit to take on travels, a flexible instrument for live sets or imaginative first, or ongoing steps into modern modular synthesis. The System Coupe works great on its own or in partnership with your existing set up.

The Coupe consists of a powered case populated with a curated set of ALM modules - some new, some staples, some proven classics - all very functional and fun. All the modules are special editions, with grey panels, white screens, magenta and blue knobs and a custom powered compact aluminium 84hp case.

At the core of the system is the Squid Salmple, a powerful sampler capable of the recording and playback of up to 8 channels of both audio and CV. It can be used simply as a percussive voice but is extremely flexible as a sampler. Take advantage of its flexibitliy to create polyphonic voices, a super controlled delay or even a CV sequencer.

The Squid Salmple comes with an extensive royalty free sound library of over 700 carefully curated samples created specifically for the module.

The system's VCO is the small but mighty MCO, a morphing wavetable oscillator with 3 simultaneous outputs. It features a normal wave output, octave down sub oscillator output and a special pulse width modultion wavetable output. There are 4 PWM types which can be applied to all 10 wave shapes.

The four transparent & clean summed VCAs of the Tangle Quartet allow you to mix, shape and route audio from these sources. The MCF multi mode filter allows for further sculpting with 3 simultaneous outputs under full voltage control.

The Coupe features 3 new modules available for the first time as part of the system; the Milton, the MCF, and a basic mult, all designed primarily with the Coupe in mind.

The Milton is a utility module that provides amplication for external line level sources, a 1 in 3 out buffered mult, an attenuator and 4 input fixed gain mixer. It was designed specifically for the Coupe system - providing some very useful functionality on a small space.

The MCF is a classic analog multimode filter with resonance featuring hi, band and low pass outputs wth voltage control of both frequency and resonance. It can be used as a sine wave oscillator at higher resonance settings with v/oct tracking over pitch.

The basic mult allows signals to be duplicated to multiple destinations.

The classic Pamelas NEW Workout & Quaid Megaslope provide numerous sequencing and endless modulation oppertunities.

Pam is a staple in the Eurorack world. Use for synced triggers, gates, envelopes and quantised CV sequences all rythimcally synced to a core BPM. Patterns can be based on euclidean rules, then looped on beats for a repeating structure or not, if preferred.

The Megaslope can be used as an advanced multi stage envelope, an LFO and step sequencer with programmable slides. The sequencer is limited to 5 stages but when combined with Pam's flexible CV and gate outputs it is capable of great variation. Unlike many sequencers, the level of each step and slide times may be voltage controlled.

The mmMidi and expander provide the means for more convenetial Midi sequencing and can fully drive the system with multiple CV, gate and trigger outputs.

The adventurous types may even want to sample CV patterns into the Squid Salmple for playback and saving to the USB memory.

Included modules:

ALM023 / mmMidi & mmT expander
ALM017 / Pamela's NEW Workout
ALM020 / QUAID MEGASLOPE
ALM027 / MULT NEW!
ALM022 / SQUID SALMPLE
ALM024 / Milton NEW!
ALM021 / MCO
ALM025 / MCF NEW!
ALM009 / Tangle Quartet
ALM019 / HPO
Read more
 1 in stock $1,896.33
Cat: 761937 Rel: 10 Feb 20
 
tote bag
Notes: Beige tote bag ewith brown and yellow logo print

100& cotton bag, 140g with screen printed logo
Read more
 1 in stock $6.58
Cat: 767977 Rel: 28 Feb 20
 
laptop stand
Notes: Antoc's new laptop stand L1 combines easy handling with sleek classical design. It can be easily assembled and disassembled without any effort and weighs only 1,5 kg. It is therefore the optimal tool for Djs who value stability and mobility.
The stand can be used universally and suits most commercially available laptops (not included).
Read more
 3 in stock $38.92
Cat: 767979 Rel: 28 Feb 20
 
laptop stand
Notes: Antoc's new laptop stand L1 combines easy handling with sleek classical design. It can be easily assembled and disassembled without any effort and weighs only 1.5 kg. It is therefore the optimal tool for DJs who value stability and mobility.

The stand can be used universally and suits most commercially available laptops (not included).

Read more
 2 in stock $38.92
Cat: 767981 Rel: 28 Feb 20
 
laptop stand
Notes: Antoc's new laptop stand L1 combines easy handling with sleek classical design. It can be easily assembled and disassembled without any effort and weighs only 1,5 kg. It is therefore the optimal tool for Djs who value stability and mobility.
The stand can be used universally and suits most commercially available laptops (not included).
Read more
 1 in stock $38.92
Cat: 718642 Rel: 18 Mar 20
 
Next generation audio interface featuring 2 DiscretePRO microphone preamps
Notes: Ultra-versatile interface from Arturia. Small format for desktop use but absolutely packed with connectivity, including MIDI, ADAT expansion, clock, USB hub, and multi-speaker support.

Supplier's notes:
You're making tomorrow's music... so why settle for yesterday's interface? AudioFuse is the revolutionary pro audio interface that sets a new standard in sonic quality, creative production and value. It fuses the superior sound of high-end analogue studio consoles with the flexibility of a solid mobile interface - with all the connectivity you need for any recording or performance.

Whatever sound you need to capture, from the most delicate ambience to the heaviest cacophony, AudioFuse will reveal the beauty in everything.

Pro studio quality was our mantra right from the start with AudioFuse. Now you can transform your desktop, hotel room, concert - whatever, wherever - into a studio with world-class sound.

No compromises, each element of the AudioFuse has been selected to perfectly serve your sound, such as the two proprietary DiscretePRO microphone preamplifiers and the set of top-notch AD/DA converters.

Saving the purity of your sound and the passion it conveys is what AudioFuse is all about.

When creating and recording, you need an interface that lets you focus on the task at hand and keep distractions to a minimum.

With AudioFuse, we didn't want to settle for merely bringing you the sound quality of a pro studio, we wanted to bring you its workflow too. That's why you have detailed metering, talkback for instant communication with talent in the next room, inserts to add professional effects processing to your recording chain, A/B monitor switching, and direct access to the essential features so you can spend more time creating and less time setting up.

Wherever it comes from, whatever it has to travel through, and wherever it needs to go, AudioFuse will guide your sound.

AudioFuse connects with virtually everything: mics, instruments, turntables, studio equipment, Mac, PC, Linux, tablets, even iOS and Android phones. It all happens with a round-trip latency as low as 3 milliseconds so you'll feel right in the groove every time.

When you know your equipment is the best of the best, creativity can take care of itself.

When it is all about giving the best of yourself being able to rely on the best technologies becomes crucial. The lowest harmonic distortion, the most linear frequency response, the highest signal-to-noise ratio and the shortest latency, these technical terms may seem far removed from your creative process, but they are essential to delivering your music in the highest quality possible.

Capture the moment - at home, in the studio, on the road, or wherever creativity strikes.

AudioFuse has a super-solid aluminium chassis you can trust, complete with a hard cover to protect it from damage in your bag - or even just dust on your desktop. The build quality goes far beyond a great-looking exterior, as well. Your unit has to pass rigorous testing before it can be packed and shipped. It even comes with a test specification printout of your exact unit. Meet your new best friend for the studio and stage.
Read more
MRP:$1,033.82 SAVE 19%
 2 in stock $839.42
Click for better price!
or call +44 20 7424 1960
quote 718642
Cat: 762330 Rel: 03 Mar 20
 
MIDI controller keyboard
Notes: Arturia's 88-key controller is designed for those who place the emphasis on keyboard quality and feel. Piano-style hammer action makes it a nice choice for serious players.

Supplier notes:
Creating music in the digital world can be difficult. So many options, so many new things to learn. KeyLab Essential lets you focus on what's important.

8 pads, 9 rotaries, 9 faders, and an expressive keyboard, but so, so much more. Music is at the heart of this controller. Every aspect of KeyLab Essential has been carefully chosen to give you the best possible experience when creating and performing. KeyLab Essential makes navigating inside your recording software a breeze thanks to the dedicated DAW Command Center, and makes browsing your presets an exciting and inspiring experience.

Spend less time with a keyboard and mouse, and more time creating, performing, and playing.

The KeyLab 88 is a professional-grade 88-note MIDI keyboard controller designed with the working musician in mind. Featuring a new hammer-action keybed from Fatar and deep integration with our award winning Analog Lab software, the KeyLab 88 is unique with its robust, solid metal construction and classic wooden side panels.

An extensive array of controls, a stylish yet amazingly lightweight design, and brilliant integration with laptops and tablets: KeyLab 88 is perfect for modern keyboard players, pianists, demanding stage performers, and professional producers who will not compromise on quality. KeyLab 88 sets a new standard in professional controller keyboards.

As a professional hybrid synthesizer, KeyLab 88 offers the immediacy of a hardware synthesizer combined with the flexibility of a software-based solution.

Thanks to the top quality, hammer-action Fatar keybed, the KeyLab 88 is the ideal companion for demanding performers.



Read more
MRP:$402.67 SAVE 22%
 5 in stock $312.41
Click for better price!
or call +44 20 7424 1960
quote 762330
Notes: One of the most exciting new synths of 2020. Extremely high-quality wavetable synth engine with great expressive features like a CS80-style ribbon controller and polyphonic aftertouch. Powerful.

Supplier notes:
The HYDRASYNTH keyboard is both a sound designers dream synth as well as a performing musicians ideal. The sound engine is designed for maximum flexibility. At the same time, we designed the user interface in a way to allow you to edit the patch quickly with a minimal amount of paging and many workflow shortcuts.

Utilizing an advanced wavetable synthesis engine, 3 Oscillators, dual Wave Mutators and 2 filters that can be configured in series or parallel, the tone generating capabilities are unmatched.

As for the performance capabilities, The HYDRASYNTH keyboard has our proprietary Polytouch keybed that offers polyphonic aftertouch over each note, giving you the type of expressive control found only in certain vintage synths.

Add to this a 4 octave ribbon controller and ergonomically designed pitch and mod wheels and you have expression and control that is not equaled in any other hardware synthesizer on the market.

The new ASM Polytouchr keybed allows not only the standard velocity and aftertouch found on other keybeds but it also supports fully polyphonic aftertouch.

In recent years companies have been trying to find ways to give the keyboard musician more ways to better express themselves. The problem is that their solution is almost never a keyboard, so you have to learn a new technique to play them.

The Polytouch keybed features a high quality, standard sized keys, so you can start playing it instantly.

The tone generation capability is the heart of any synthesizer.

The 3 oscillators allow you to choose from a selection of 219 single cycle waveforms.

Wavemorphing is a feature usually found on synths with preset wave tables. Creating user wavetables is arduous or downright impossible. Unlike most wavetable synths, the oscillators 1 & 2 have our WAVELIST mode.

This mode allows you to pick and choose 8 waves, from the bank of 219, arrange them in the order you want, and then morph from one to another.

Oscillators 1 & 2 are routed into our MUTATORS. The Mutators allow you to modulate, bend and sculpt the sound in new (and old) ways.

Each MUTANT allows you to choose from the following processes:

FM-Linear - for making classic FM sounds. Choose multiple FM sources, including external inputs.

Wavestack- creates 5 copies of the incoming sound and allows you to set a detune amount.

Hard Sync - This gives you those classic hard sync sounds. Try hard syncing a morphing wavetable for some fun.

Pulse Width - This will pulse width modulate ANY input sound.

PW - Squeeze - This is a different form of pulse width mod that creates a smoother sound.

PW-ASM - this mode divides the incoming wave into 8 slices and allows you to set how much pulse width mod will happen in each section.

Harmonic Sweep - this will sweep the harmonics of the incoming sound.

The Mutant's can also generate its own waveforms in both FM and Sync modes so that you do not have use another oscillator....Of course the routing is flexible so you can choose the other oscillators as mod sources if you like.

The 3 Oscillators are fed into a mixer along with the Noise generator and Ring Modulator.

The Mixer allows you to mix levels as well as pan the input source.

There is a balance control that allows you to choose how much signal of each source is routed to filters 1 and 2.

The filters can be set to be parallel or series for ultimate flexibility.

If oscillators and tone generators are the heart of a synthesizer, the filters are the soul.

The Hydrasynth has two filters that can be configured in series or parallel.

The first filter has 11 different filter models, giving you multiple options for tailoring your sound.

The second filter is a 12db per octave has a continuous sweep from Low pass to bandpass to high pass, similar to the way the classic SEM filter worked.

5 DAHDSR Envelopes.

An advanced sound engine needs plenty of modulation sources. Our 6 stage envelopes feature Delay, Attack, Hold, Decay, Sustain and Release stages.

The time settings for the stage can be set in seconds or in time divisions, giving you envelopes that play in
sync to your song.

You can also loop the envelopes to create LFO's whose shape can be voltage controlled in the modulation matrix.

The modulation capabilities on the Hydrasynth are endless.

With 32 user definable modulation routings, you will have plenty of ways to use the 29 modulation sources and 155 modulation destinations.

Almost everything in the synth engine can be a modulation destination including the effects and arpeggiator.

The Modulation matrix points themselves can also become modulation destinations.
Read more
MRP:$1,639.73 SAVE 17%
 4 in stock $1,366.44
Click for better price!
or call +44 20 7424 1960
quote 767997
Cat: 762355 Rel: 21 Apr 20
 
Studio headphones
Notes: Very, very nice high-end over-ear headphones from a company we expect to hear a lot more of in coming years. Closed-back design with great build quality and sound.

Supplier's notes:
The Hi-X55 circum-aural closed-back headphones provide over-the-ear comfort as well as portability with the foldable hinge design. Metal parts are used for all critical elements in order to guarantee long durability even under rough conditions be it in studios or tour buses.

Developed from scratch, the all new 44mm Hi-X driver features a ring magnet system - a home-grown technology which has been incorporated into various award-winning headphones in the past by our engineers. It allows improved air-flow and the strongest magnetic field in its class. This ring magnet structure coupled with a copper-clad aluminum voice coil reduces the weight of the membrane and voice coil that sits on it allowing it to move or change direction faster providing a better impulse reac- tion, highly desired for contemporary as well as traditional music production.

A double acoustic wall was designed to achieve the best damping results, to support this and in- creased comfort, the form factor of the earpads has been rethought completely, giving more room for the ears without enlarging the earcups, reducing fatigue from long listening sessions.

Engineered and manufactured in Austria, the Hi-X55, and its on-ear brother the Hi-X50, are tailored to suit the demanding production conditions of today. With the all-digital signal chain, using 24bit or even 32bit, the dynamic depth of contemporary source tracks puts engineer and material at the mix- ing desk to the test.
Read more
MRP:$314.31 SAVE 17%
 3 in stock $260.87
Click for better price!
or call +44 20 7424 1960
quote 762355
Cat: 767878 Rel: 02 Mar 20
 
wireless earphones
Notes: Discover true wireless freedom and immersive sound within a stylish, compact design. Lightweight earbuds offer the perfect, secure fit and comfort for long periods of use. Features include dynamic drivers, Bluetooth 5.0 for seamless connection to smart devices and intuitive touch controls to handle your music and hands-free calls with ease. The portable power-case stores and charges your earphones which provides up to 12 hours additional play time, keeping your earphones ready to use when you're on-the-go.

The box for this item contains :

2pcs True wireless earphones
Power-case
USB charging cable
Spare earbuds
User guide
Read more
MRP:$69.43 SAVE 45%
 2 in stock $37.91
Cat: 688736 Rel: 19 Jun 20
 
Analog semi-modular synthesiser based on Korg's legendary MS20
Notes: Channelling the Korg MS20, Behringer serve up a desktop module with attitude. Semi-modular design plays nicely with Eurorack gear to add a dose of the aggro MS sound to your rig.

Supplier notes:
An ultra-affordable homage to that iconic synthesizer with all the features of the original and then some, the K-2 lets you conjure up virtually any sound with incredible finesse and ease. With its pure analog signal path, dual authentic VCOs with 4 selectable waveforms each, plus extremely flexible VCF and VCA filters, the K-2 is sure to become your favorite keyboard. Owning the K-2 is like having your own personal time machine, enabling you to embrace the past - or make your imprint on the future!

Your K-2 comes ready to rock, thanks to its default signal routing that doesn't require lifting a single patch cable to instantly create amazing sounds. The semi-modular architecture lets you easily tap into the inspired sounds of 1980s and '90s progressive rock, wave, EDM and synth-pop music synthesizer tracks that made rock and roll history - or to design incredibly fat and original sounds that will make you a legend in your own right!

The very heart of K-2's sound is its versatile 6 dB High/12 dB Low filter, which lets you freely experiment with the High and Low-Pass Cutoff Frequencies and their respective peak (resonance) settings to dial in the perfect sound. The high-pass filter sets the level of signals below the cutoff frequency, effectively reducing the fundamental and lower-order harmonics levels. The low-pass filter controls the level of signals above the cutoff, which reduces higher-order harmonic content. K-2's VCF Peak controls provide emphasis to the signals at the crossover frequency.

K-2's authentic Voltage Controlled Oscillators (VCOs) provides an incredible range of 4 variable oscillator shapes with variable pulse widths and ring modulation for the ultimate in sound creation. VCO 1 waveform choices include triangle, reverse-sawtooth, noise and pulse, where the pulse width can be adjusted from square wave to narrow across a 4-octave range (32', 16', 8', or 4'). VCO 2's waveform can be selected from reverse-sawtooth, square, narrow pulse and ring, where both oscillators are operating. VCO 2's pitch can also be varied independently across a 4-octave range (16', 8', 4' and 2'). The VCO Mixer allows you to adjust the levels of VCO 1 and VCO 2 to create an overall mix and a wide range of amazing effects.

K-2's Low Frequency Oscillator (LFO), the Modulation Generator, features a selectable Waveform (reverse sawtooth, triangle, sawtooth) with a sweepable frequency range from 0.1 to 22 Hz - and 2 separate Envelope generators to help you craft incredible sounds! Envelope Generator 1 affects the frequency modulation via controls for Delay, Attack and Release Time, while generator 2 adjusts the cutoff frequency modulation, as well as amplitude modulation of the Voltage Control Amplifier (VCA). Dials for this generator include Hold, Decay, Attack, Sustain, and Release for unparalleled envelope-shaping control.

While it is a monophonic instrument (one note at a time), K-2's 16-note Poly Chain function lets you combine multiple synthesizers for up to 16-voice polyphony - plus provides vastly improved reliability and stability over its 1970s and '80s predecessors.

Designed to handle the rigors of life on the road or in the studio, your K-2 can easily be transferred into a standard Eurorack case for the perfect integration into your existing system.

For those who want the numbers, K-2 has 36 controls, all laid out in a highly-intuitive format that puts the joy back into your music creation. And you can expand K-2's tone-sculpting capabilities beyond your wildest dreams by utilizing the multi-I/O patchbay to connect external devices at virtually any point in the signal path!
Read more
 More than 10 in stock $295.58
Cat: 688722 Rel: 19 Jun 20
 
analog synthesiser
Notes: Blue version of Behringer's tribute to the legendary Roland SH-101. Classic Roland-inspired 80s analogue sound with a gorgeously squelchy resonant filter and powerful oscillator with beefy sub.

Supplier notes:
An ultra-affordable homage to that iconic synthesizer with all the features of the original and then some, such as a 32-step sequencer, arpeggiator and live performance kit, the MS-1-BU lets you conjure up virtually any sound with incredible finesse and ease. With its 32 semi-weighted full-size keys, pure analog signal path, authentic 3340 VCO with 4 simultaneously-mixable waveforms, plus extremely flexible VCF and VCA filters, the MS-1-BU is sure to become your favorite keyboard. Owning the MS-1-BU is like having your own personal time machine, enabling you to embrace the past - or make your imprint on the future!

Great care has been taken in engineering the MS-1-BU, including the true to the original analog circuitry, legendary VCO, VCF and VCA designs, all of which combine to make it easy to recreate the classic sound performance. This highly-focused attention to detail is what gives the MS-1-BU its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects - and all the way out to the otherworldly sounds of your imagination.

The inspired synthesizer tracks laid down in the 1980s and '90s are etched in the annals of progressive rock, wave, EDM and synth-pop music forever, making them truly classic in every sense of the word. The MS-1-BU lets you recreate all of that magic - or design incredibly fat and original sounds that will make you a legend in your own right!

MS-1-BU's authentic 3340 Voltage Controlled Oscillator (VCO) provides an incredible range of 4 simultaneously-mixable waveforms for sculpting the perfect sound. Options include: saw, triangle, square/pwm and octave-divided square sub-oscillator. Additionally, the VCO can be adjusted across a wide, 4-octave range (16', 8', 4', and 2'). This amazing flexibility gives you the tools needed to be your creative best.

The very heart of MS-1-BU's sound is its highly-flexible Voltage Control Filter (VCF), which includes faders for: cutoff Frequency (10 Hz to 20 kHz); Resonance (0 to self-oscillation); Envelope and Modulation depth, and Keyboard follow (0 to 100%) to dial in the perfect sound. MS-1-BU's VCF can be modulated via the ADSR, keyboard tracking and Bender controller. The Frequency Modulation (FM) Amount knob sets the depth, while the FM Source selector lets you further modify the signal by choosing from: pulse; sawtooth; sub oscillator 1 octave down; 2 octaves down; narrow 2 octaves down, and Noise.

MS-1-BU's sequencer allows you to program up to 32 steps of notes and rests and save them as a pattern. You can record, save and recall up to 64 patterns, all of which can be stored in the 8 banks, each holding up to 8 patterns. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode, which allows you to interact while composing a pattern. The onboard Arpeggiator features 8 patterns (you can use just by playing a chord, which the arpeggiator then sequences through your selected pattern. Both the sequencer and arpeggiator in the MS-1-BU are fun, mesmerizing and totally addictive.

When you're ready to strut your stuff and get a little centerstage time, the MS-1-BU has that covered too! Just attach the included guitar strap and handgrip (with pitch bend wheel and a pitch modulation trigger), and take your performance to the next level.

In addition to the great sound-sculpting features already mentioned, the MS-1-BU has still more to offer. The noise generator can also be used as modulation source to create distortion-like effects, which will send your solo soaring into the stratosphere. Glide (portamento) lets you sweep seamlessly over time from one note to the next, creating smooth-as-silk transitions that few other instruments can emulate. MS-1-BU's Bender is also assignable to the VCO, VCF and pitch mod wheel on attachable handgrip. You can even modulate the pulse wave via the LFO, envelope or manually - for sounds ranging from mild to wild!

For those who want the numbers, MS-1-BU has 57 knobs, faders and switches, all laid out in a highly-intuitive format that puts the joy back into your music creation. Input and output connections include: MIDI I/O and Thru over USB/MIDI DIN; Velocity Out; CV; Gate; External Clock In; VCF CV In; Hold; External Audio; Phones; and main Output.

Read more
 More than 10 in stock $302.94
Cat: 688717 Rel: 19 Jun 20
 
analog synthesiser
Notes: Inspired by the amazing Roland SH-101, Behringer's MS-1 is a peach of an analogue mono synth, excelling at deep, elastic basslines but also amazing for arps, leads and FX.

Supplier notes:
An ultra-affordable homage to that iconic synthesizer with all the features of the original and then some, such as a 32-step sequencer, arpeggiator and live performance kit, the MS-1-BK lets you conjure up virtually any sound with incredible finesse and ease. With its 32 semi-weighted full-size keys, pure analog signal path, authentic 3340 VCO with 4 simultaneously-mixable waveforms, plus extremely flexible VCF and VCA filters, the MS-1-BK is sure to become your favorite keyboard. Owning the MS-1-BK is like having your own personal time machine, enabling you to embrace the past - or make your imprint on the future!

Great care has been taken in engineering the MS-1-BK, including the true to the original analog circuitry, legendary VCO, VCF and VCA designs, all of which combine to make it easy to recreate the classic sound performance. This highly-focused attention to detail is what gives the MS-1-BK its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects - and all the way out to the otherworldly sounds of your imagination.

The inspired synthesizer tracks laid down in the 1980s and '90s are etched in the annals of progressive rock, wave, EDM and synth-pop music forever, making them truly classic in every sense of the word. The MS-1-BK lets you recreate all of that magic - or design incredibly fat and original sounds.


The very heart of MS-1-BK's sound is its highly-flexible Voltage Control Filter (VCF), which includes faders for: cutoff Frequency (10 Hz to 20 kHz); Resonance (0 to self-oscillation); Envelope and Modulation depth, and Keyboard follow (0 to 100%) to dial in the perfect sound. MS-1-BK's VCF can be modulated via the ADSR, keyboard tracking and Bender controller. The Frequency Modulation (FM) Amount knob sets the depth, while the FM Source selector lets you further modify the signal by choosing from: pulse; sawtooth; sub oscillator 1 octave down; 2 octaves down; narrow 2 octaves down, and Noise.

MS-1-BK's Envelope generator features 4 ADSR (Attack, Decay, Sustain and Release) faders that help you craft incredible sounds, and utilizes a 3-position switch for Gate, Gate + Trigger and LFO. When applied to the Voltage Control Amplifier (VCA), the ADSR envelope is used to control the level of the note being played over time. When applied to the VCF, the ADSR envelope is used to control the cut-off frequency of the filter for each note played over time. In addition, the ADSR envelope can also be used to affect the VCO pulse width modulation.

MS-1-BK's sequencer allows you to program up to 32 steps of notes and rests and save them as a pattern. You can record, save and recall up to 64 patterns, all of which can be stored in the 8 banks, each holding up to 8 patterns. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode, which allows you to interact while composing a pattern. The onboard Arpeggiator features 8 patterns (you can use just by playing a chord, which the arpeggiator then sequences through your selected pattern. Both the sequencer and arpeggiator in the MS-1-BK are fun, mesmerizing and totally addictive.

When you're ready to strut your stuff and get a little centerstage time, the MS-1-BK has that covered too! Just attach the included guitar strap and handgrip (with pitch bend wheel and a pitch modulation trigger), and take your performance to the next level.

In addition to the great sound-sculpting features already mentioned, the MS-1-BK has still more to offer. The noise generator can also be used as modulation source to create distortion-like effects, which will send your solo soaring into the stratosphere. Glide (portamento) lets you sweep seamlessly over time from one note to the next, creating smooth-as-silk transitions that few other instruments can emulate. MS-1-BK's Bender is also assignable to the VCO, VCF and pitch mod wheel on attachable handgrip. You can even modulate the pulse wave via the LFO, envelope or manually - for sounds ranging from mild to wild!

For those who want the numbers, MS-1-BK has 57 knobs, faders and switches, all laid out in a highly-intuitive format that puts the joy back into your music creation. Input and output connections include: MIDI I/O and Thru over USB/MIDI DIN; Velocity Out; CV; Gate; External Clock In; VCF CV In; Hold; External Audio; Phones; and main Output.
Read more
 More than 10 in stock $313.47
Click for better price!
or call +44 20 7424 1960
quote 688717
Cat: 688740 Rel: 19 Jun 20
 
analog synthesiser
Notes: Behringer's tribute to the ARP Odyssey is a pleasingly retro instrument. Fully analogue duophonic goodness with that classic tough ARP sound, great for bass and leads.

Supplier notes:
An ultra-affordable homage to the legendary ARP* synthesizer of the '70s and beyond with all the features of the original and then some including: dual VCOs; 32-step sequencer with onboard storage; arpeggiator and world-class Klark Teknik FX that boast reverb, chorus, flanger, delay, pitch shifter and multi-effects, the ODYSSEY lets you conjure up virtually any sound with incredible finesse and ease. With its 37 semi-weighted full-size keys, pure analog signal path based on authentic VCO, VCF and VCA designs from the '70s, the ODYSSEY is sure to become your favorite keyboard. Owning the ODYSSEY is like having your own personal time machine, enabling you to embrace the past - or make your imprint on the future!

Great care has been taken in engineering the ODYSSEY, including the true to the original analog circuitry, legendary VCO, VCF and VCA designs, all of which combine to make it easy to recreate the classic sound performance. This highly-focused attention to detail is what gives the ODYSSEY its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects - and all the way out to the otherworldly sounds of your imagination.

The inspired synthesizer tracks laid down in the 1970s are etched in the annals of progressive rock, disco and synth-pop music forever, making them truly classic in every sense of the word. The ODYSSEY lets you recreate all of that magic - or design incredibly fat and original sounds that will make you a legend in your own right!

ODYSSEY's 2 voices are the product of dual analog Voltage Controlled Oscillators (VCOs), which each provide your choice of: sawtooth, square/pulse with pulse-width modulation, or sine/square wave LFO for sculpting the perfect sound. This amazing flexibility gives you the tools needed to be your creative best.

The very heart of ODYSSEY's sound is its highly-flexible Voltage Control Filter (VCF), which includes faders for: Frequency; Resonance (0 to self-oscillation); and High Pass Filter (HPF) Cutoff Frequency. A feature missing from the original is a new 3-position switch, which lets you choose the VCF filter you prefer from all 3 iterations of the famous synth: 2-pole MKI (4023); 4-pole MKII (4035); and 4-pole MKIII (4075), plus a Drive switch to add a touch of edge to your sound.

ODYSSEY features two easy-to-use Envelope Generators, AR (Attack and Release) and ADSR (Attack, Decay, Sustain and Release) with 2 and 4 faders, respectively to help you craft incredible sounds. Switches are provided for ADSR Gate/LFO Repeat, AR Gate/LFO Repeat or thirdly, Keyboard Repeat/Auto Repeat - which provides a wide range of performance options.

ODYSSEY's sequencer allows you to program up to 32 steps of notes and rests and save them as a pattern. You can record, save and recall up to 64 patterns, all of which can be stored in the 8 banks, each holding up to 8 patterns. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or in Step mode, which allows you to interact while composing the pattern. The onboard Arpeggiator features 8 patterns (you can use just by playing a chord, which the arpeggiator then sequences through your selected pattern. Both the sequencer and arpeggiator in the ODYSSEY are fun, mesmerizing and totally addictive.

For those who want the numbers, ODYSSEY has 35 sliders, 25 switches and 3 pressure-sensitive buttons, all laid out in a highly-intuitive format that puts the joy back into your music creation. Input and output connections include: MIDI In and Out over USB/MIDI DIN; Pedal; Portamento Footswitch; Low and High Outputs; External Audio In; CV In and Out; Gate In and Out, and Phones with a dedication Volume control.

In addition to the great sound-sculpting features already mentioned, ODYSSEY has still more to offer. There's the pink/white noise generator with sample & hold plus lag processor; Portamento, which lets you sweep seamlessly over time from one note to the next, creating smooth-as-silk transitions that few other instruments can emulate; and the 3 pressure-sensitive buttons for pitch and modulation control that provide a total hands-on performance. ODYSSEY is the ideal tone-making machine for creating sounds that run the gamut - from mild to wild!
Read more
 More than 10 in stock $403.94
Cat: 772857 Rel: 18 Jun 20
 
analogue synthesiser
Notes: The Octave Cat isn't the best known synth that Behringer have turned their attention to, but it's well worth a look. Similar in approach to the Odyssey but with an even broader sonic range, going from warm and fat to tough and edgy.

Supllier notes:
Great care has been taken in engineering the CAT, including the true to the original analog circuitry, legendary VCO, VCF and VCA designs that come together to recreate classic tones that are evocative of classic electronic music. This highly-focused attention to detail is what gives the CAT its ultra-flexible sound shaping capability. It gives you the ability to cover a lot of amazing tones from super-fat bass, tasty leads - and all the way to full on dreamy ambience from the far reaches of your imagination.

The synthesizer tracks laid down in the 1970s and 80s in progressive rock, wave and synth-pop have become classics and have inspired many other artists.

The CAT has the ability to accept any keyboard controller via MIDI. The signals generated can be tweaked via the Pitch Bend slider which can bend a note up or down one octave. Bump this up to two octaves by flipping the Octave Shift switch up or down. Use the Glide slider to change how fast a note transitions to another; up is faster, down is slower. Combine that with the LFO Freq slider to control the LFO and ADSR repeat tempo and you can create some amazing pulsating portamentos.

The very heart of the CAT's sound is its two VCOs. The Duophonic/Paraphonic nature of the CAT allows both oscillators to be controlled independently. Use the Fine and Coarse Frequency controls to tune VCO1 to VCO2. Keyboard control on the CAT can be set to either Mono or Poly. Poly mode lets VCO1 generate the highest note played on the keyboard while VCO2 handles the lowest allowing two notes to be played simultaneously. Setting the switch to Mono mode makes VCO1 generate the lowest note depressed on the keyboard.

Waveform switches on both VCOs allow different waveforms to be patched in from the LFO. Choose between Sine, Square, Sample and Hold and even pitch modulation through each VCO. Turning the Modulation Depth knobs in either direction controls the intensity of the effect. VCO2 also comes with a Sync switch that locks VCO1 with it and has them act as one huge oscillator to produce more complex waveforms and dramatic results. Mix VCO1 into VCO2 or vice versa and the CAT can produce some really tasty tones that make themselves at home in your next synth jam.

Each VCO on the CAT comes equipped with their own waveform sliders where you can adjust the volume of each type of VCO wave form. Pump up the Sub Octave, Sawtooth, Square, Triangle or Pulse waves or mix them all together and create some truly unique tones.

The CAT comes with another set of claws in the form of a VCF filter section. Here you can get more complex and robust tones by incorporating VCO1 into the mix. Introduce more waveforms and manipulate the Q slider to emphasize harmonics and Filter Cutoff slider which acts as a low-pass filter. Turn the CAT into a really funky bass machine or an out-of-this-world synth that creates some searing lead tones. You can even create some amazing drum sounds by manipulating the VCOs, VCF and ADSR.

The CAT features a whole slew of Inputs and Outputs that expand its capabilities beyond what you can see out of the box. You can route external control voltages to VCO1 or 2, the VCF and even pump in some external line-level audio into the CAT. You can even connect the CAT to other external synthesizers through the Gate, ADSR, AR or Keyboard Outputs. The CAT's 16-note Poly Chain function lets you combine multiple synthesizers for up to 16-voice polyphony - and it provides vastly improved reliability and stability over its 1970s and '80s predecessors.

To give the signal even more character, you can use the CAT's Transient Generator to create a detailed voltage transient every time a key is depressed. Adjust the Attack, Decay, Sustain and Release via the matching sliders and to shape your signal. The AR transient generator works similarly to the ADSR but with less detailed control over the envelope. You can also set the ADSR to automatically repeat or only when a key is held down. The Sample and Hold switch can be set so the VCO1 setting is sampled or, when set to Noise mode, produce a random output pattern. Slide the LFO Delay control up or down to determine when the LFO will reach its maximum output after a key is depressed.

The CAT has 47 controls, all laid out in a highly-intuitive format that puts the joy back into your music creation.
Read more
 More than 10 in stock $281.91
Cat: 767536 Rel: 28 May 20
 
analogue synthesiser
Notes: Long-awaited analogue monster from Japan's Black Corporation, inspired by the rare RSF Polykobol II keyboard. Raw synth power with eight-voice analogue-based architecture. Stunning.

Supplier notes:
The unique architecture of KIJIMI features smoothly variable waveforms on each fully analog oscillator, a rich SSI2144 lowpass filter, and a wealth of deeply programmable modulators, making it one of the most powerful polyphonic analog synthesizers ever made.

KIJIMI features eight voices, each with two oscillators + one suboscillator, a lowpass filter, VCA, 6 envelopes, and 16 LFOs. A deeply programmable modulation matrix along with velocity and polyphonic aftertouch route these modulators into a variety of destinations to create anything from subtle movements in bass lines to complex, organically evolving soundscapes. Polyphonic aftertouch introduces another level of touch- controlled modulation independent to each voice, making KIJIMI a truly powerful performance tool.

Variable wave shaping of its analog oscillators is a feature unique to KIJIMI's synthesizer design. Rather than selecting a single waveform KIJIMI offers a range of waveforms from Triangle through Saw to Pulse waves, passing smoothly through every shape in between. Using modulation sources to control the oscillator waveform brings a new dimension to the sound sculpting process. Each oscillator can be modulated independently, detuned in semitone intervals and synced to each other, VCO2 can even be used to FM VCO and filter, bringing rich harmonic content to the initial tone.

KIJIMI's SSI2144-based lowpass filter is an updated version of a legendary design found in some of the most powerful analog synthesizers throughout history. Apart from being a gorgeous, rich lowpass filter for typical duties, a powerful feature found in the KIJIMI is the ability to FM the filter via VCO2, resulting in sounds ranging from atonal clangorous FX to aggressive vocal-sounding formants. The filter cutoff and resonance can be independently modulated, providing a filter section, which is far more complex than most analogue polyphonic synthesizers.

KIJIMI's two envelopes are set up in typical ADSR mode by default, but a CYCLE button can be switched on to enter a cycling trapezoidal mode reminiscent of the function generator found in the EMS Synthi. In this mode, the 4 parameters are instead used to control Rise, Time On, Fall, and Time Off, resulting in a uniquely controllable cyclic function. Each envelope also features 3 switchable speed modes ranging from fast, medium, or slow.

By default, KIJIMI features two powerful LFOs - Each with many selectable waveforms, rate, and a dedicated A/D envelope for modulating its rate on each new trigger. This means that each LFO can have its speed modulated on each new note independently of any other modulators across the synthesizer.

The modulation matrix in KIJIMI is what makes this instrument truly special: 8 destinations for each LFO, and 4 destinations for ADSR2, each with its own button to switch between Unipolar (+/-) or Bipolar modulation. Furthermore, the new firmware introduces the ability to assign different LFO settings (rate, waveform, EG and depth) to EACH individual destination. Below the Modulation Matrix are the performance modulators: Velocity and MPE- based polyphonic aftertouch which can be routed to 6 simultaneous destinations, each with its own bipolar level setting. With the ability to control filter, VCA, pitchbend, sub oscillator level, and 2 LFOs each modulating up to 8 destinations independently on each voice through your aftertouch performance, the expressive possibilities are truly limitless.

KIJIMI features full MIDI control and 10 preset banks with 128 slots including a Factory Bank and 9 user banks for storing and recalling settings.
Read more
 1 in stock $3,838.44
Cat: 765885 Rel: 27 Feb 20
 
polyphonic analogue synthesiers
Notes: Wow! Stunning analogue polysynth inspired by the classic early 80s Elka Synthex, renowned for amazing strings and pads. Painstakingly developed by the company behind the Deckard's Dream. Beautiful.

Supplier's notes:
Xerxes is an eight-voice polyphonic analog Synthesizer that features two discrete logic DCO's per voice. Each DCO section offers four waveforms (triangle, saw, square, pulse), octave switch, transpose, oscillator PWM, PAM, ring mod, pulse width, and a volume knob. It offers an analog multimode filter (HP/BP/LP) as well as two LFO's and 2 ADSR envelopes. Furthermore there is an analog BBD stereo chorus.

The synth is heavily inspired by the well-known Elka Synthex Synthesizer from the past but it is not a replica. It's a completely new development that has many modern and clever new features. The interface was not taken from the vintage Synthex but is also heavily inspired without cloning it.
Read more
 1 in stock $3,833.19
Click for better price!
or call +44 20 7424 1960
quote 765885
Cat: 768116 Rel: 02 Mar 20
 
audio mixer
Notes: One of the smallest mixers on the market. Four channels, simple two-band EQ and a decent selection of digital effects make it a good choice for those needing to combine just a few signals.

Supplier notes:
Compact format audio mixer with 2, 4 or 6 mono input channels and a stereo line input. Each mono channel has a combo XLR/jack input with individually switchable mic/instrument impedance and +48V phantom power for the XLR. Input channels have High/Low EQ and Pan controls. The B/T pairing button enables wireless connection to a smart phone or tablet for playback. All CSD mixers feature a 16 program DSP effects section with digital reverbs, delays and modulation effects for vocals and instruments. Output is delivered on a pair of balanced XLR connectors and offers very low noise operation for high quality studio or live performances.

The box for this item contains :

CSD series compact mixer
5Vdc power adaptor
Read more
MRP:$124.97 SAVE 28%
 1 in stock $90.46
Click for better price!
or call +44 20 7424 1960
quote 768116
Cat: 768119 Rel: 11 Jun 20
 
compact mixer
Notes: Compact format audio mixer with 2, 4 or 6 mono input channels and a stereo line input. Each mono channel has a combo XLR/jack input with individually switchable mic/instrument impedance and +48V phantom power for the XLR. Input channels have High/Low EQ and Pan controls. The B/T pairing button enables wireless connection to a smart phone or tablet for playback. All CSD mixers feature a 16 program DSP effects section with digital reverbs, delays and modulation effects for vocals and instruments. Output is delivered on a pair of balanced XLR connectors and offers very low noise operation for high quality studio or live performances.

The box for this item contains :

CSD series compact mixer
5Vdc power adaptor
Read more
MRP:$150.21 SAVE 30%
 1 in stock $105.19
Cat: 768121 Rel: 11 Jun 20
 
compact mixer
Notes: Ultra-compact 8-channel mixer with two-band EQs, 24-bit digital effects and Bluetooth streaming for convenience. One of the smallest 8-channel mixers on the market.

Supplier notes:
Compact format audio mixer with 2, 4 or 6 mono input channels and a stereo line input. Each mono channel has a combo XLR/jack input with individually switchable mic/instrument impedance and +48V phantom power for the XLR. Input channels have High/Low EQ and Pan controls. The B/T pairing button enables wireless connection to a smart phone or tablet for playback. All CSD mixers feature a 16 program DSP effects section with digital reverbs, delays and modulation effects for vocals and instruments. Output is delivered on a pair of balanced XLR connectors and offers very low noise operation for high quality studio or live performances.

The box for this item contains :

CSD series compact mixer
5Vdc power adaptor
Read more
MRP:$175.46 SAVE 31%
 1 in stock $120.97
Click for better price!
or call +44 20 7424 1960
quote 768121
Cat: 768282 Rel: 11 Jun 20
 
mixing console
Notes: Fully featured live mixing console with 14 mono mic/line inputs on XLR/jack and 2 stereo line jack inputs. All channels have gain, 3-band EQ, switchable pre/post aux output, FX send, pan, PFL switch and 60mm channel faders. Phantom power is switchable to all XLR inputs for condenser microphones and active DI boxes. Internal effects take the form of a 16-program 24-bit DSP engine with independent level fader and AFL switch for monitoring. An inbuilt media player can accept a USB memory stick for playback of stored audio tracks and can also record the mix output for documenting rehearsals or performances. B/T wireless compatibility enables pairing with a smart phone or tablet for remote playback. Global EQ is handled by a 7-band graphic EQ and the overall mix is fed from master faders to left & right balanced XLR outputs. A 2-track RCA line input has a level control for mixing in a playback source. 2-track RCA output can be connected on to recording equipment or as an additional output feed if required. Low noise and clean audio path with enough features and routing options for live performances, conferences and theatre productions.

The box for this item contains :

CSX-18 mixing console
IEC power lead
Read more
MRP:$314.31 SAVE 26%
 1 in stock $233.51
Cat: 761225 Rel: 13 Jan 20
 
monophonic analogue synthesizer & sequencer
Notes: Special edition of one of our favourite 303 clones. Fully analogue tribute to the Roland original with incredible sound. Authentic acid at a very nice price.

Supplier's notes:
A full analog synth clone of the famous TB303, coming with a lot of new features and improvements, from the sound point of view as well as the ergonomics of the machine and the sequencer.

A new design, new pots very smooth, new features for Live jam, 2 new sequencer modes for even more creativity, added CV / Gate (and even more) outputs to play your favorite synths !

The design of the analogue circuit (composed of 1 VCO) and the audio engine has been improved compared to the previous version, giving it a warm and groovy sound thanks to the addition of the Shuffle (not present on the original) .

The very intuitive sequencer takes on the original spirit while bringing new and unique features such as Mute and Hammer, which gives it a great flexibility for live jam and more sound variations, as well as 2 new sequencer modes to create New patterns.
Read more
 4 in stock $308.22
Click for better price!
or call +44 20 7424 1960
quote 761225
Decksaver Boss RC505 Cover (polycarbonate shell cover)
Cat: 766129 Rel: 28 Feb 20
 
polycarbonate shell cover
Notes: The tools we use to compose and perform music are dear to our hearts. Dust, liquid and accidental impact have taken many a good looper down over the years - this is where Decksaver steps in. Precision trimmed for a perfect fit whilst accommodating cables, the RC-505 can sit ready for operation. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 2 in stock $42.07
Click for better price!
or call +44 20 7424 1960
quote 766129
Decksaver Novation Launch Pad X Cover (polycarbonate shell cover)
Cat: 766126 Rel: 28 Feb 20
 
polycarbonate shell cover for Launchpad X
Notes: Engineered in the UK specifically for the Novation Launchpad X Controller, a tough but lightweight polycarbonate shell protects from dust, liquid and accidental impact. Precision moulded for an exact fit whilst accommodating cables, your Launchpad X can sit ready for operation. Slides straight into a bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 2 in stock $30.77
Decksaver Novation Launchpad Mini Cover (polyarbonate shell cover)
Cat: 766127 Rel: 28 Feb 20
 
polycarbonate shell cover
Notes: Engineered in the UK specifically for the Novation Launchpad Mini Controller, a tough but lightweight polycarbonate shell protects from dust, liquid and accidental impact. Precision moulded for an exact fit whilst accommodating cables, your Launchpad Mini can sit ready for operation. Slides straight into a bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 3 in stock $29.71
Decksaver Novation Launchpad Pro Mk3 Cover (polycarbonate shell cover)
Cat: 766124 Rel: 28 Feb 20
 
polycarbonate shell cover
Notes: Engineered in the UK specifically for the Novation Launchpad Pro MK3 Controller, a tough but lightweight polycarbonate shell protects from dust, liquid and accidental impact. Precision moulded for an exact fit whilst accommodating cables, your Launchpad Pro MK3 can sit ready for operation. Slides straight into a bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 2 in stock $30.77
Cat: 766132 Rel: 02 Mar 20
 
polycarbonate shell cover
Notes: Dust, liquid and accidental impact have taken many a good analogue synth down over the years - this is where Decksaver steps in. Precision trimmed for a perfect fit whilst accommodating cables, the OB-6 module can sit ready for operation. Our OB-6 module cover features Soft-Fit technology, providing extra protection to vulnerable wooden cheek panels that often adorn synthesizers. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 3 in stock $54.70
Click for better price!
or call +44 20 7424 1960
quote 766132
Cat: 766134 Rel: 02 Mar 20
 
polycarbonate shell cover
Notes: Dust, liquid and accidental impact have taken many a good analogue synth down over the years - this is where Decksaver steps in. Precision trimmed for a perfect fit whilst accommodating cables, the Prophet-6 module can sit ready for operation. Our Prophet-6 module cover features Soft-Fit technology, providing extra protection to vulnerable wooden cheek panels that often adorn synthesizers. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 3 in stock $52.59
Click for better price!
or call +44 20 7424 1960
quote 766134
Notes: Bus board to connect 14 modules

An assembled and tested bus board, 22 sockets, e.g. for customers who want to built their own case and need a bus board for A-100 modules, includes cables for connection to +/-12V power supply (4 wires with flat connectors on both ends, length about 30cm), but no mechanical parts (e.g. screws, spacers, nuts, washers).

In the new version of the A-100 bus board (labeled Version 6 / 2019) boxed pin headers are used which are equipped with a reverse protection (gap for the "nose" of the socket of the bus cable). When the bus cable coming from the module is connected to the boxed header in question the "nose" has to point to the right. The polarity of the cable is correct if the red wire of the bus cable then points to the bottom (to the continuous line labeled"RED WIRE" on the pc board). If this is not the case please do not connect the module to the bus board ! Otherwise both the module and the power supply (A-100PSU3) may be damaged ! In that case please contact the manufacturer of the module and ask for a suitable bus cable with the correct polarity of the connector.

The bus cables of original A-100 modules manufactured by Doepfer are equipped with suitable bus cables since 2012. Only for older A-100 modules manufactured before 2012 it may happen that the polarity of the 16 pin female connector of the bus cable is wrong (nose points to the left when red wire points to the bottom). This is because in the past unboxed pin headers were used and the position of the "nose" did not matter. In such a case please contact Doepfer or one of their dealers and order a suitable bus cable.
Read more
 1 in stock $38.40
Cat: 780211 Rel: 22 Jun 20
 
studio monitor
Notes: LYD 5, with its low-volume precision, is the ideal complement for any small studio set-up. It uses the same lightweight aluminium voice-coils in its handmade 5in MSP drive-units as our high-end hi-fi speakers, and pairs them with cutting-edge Class-D amplification as well as a 24-bit/96kHz signal path with advanced DSP.
Read more
MRP:$460.74 SAVE 20%
 2 in stock $367.11
Click for better price!
or call +44 20 7424 1960
quote 780211
Cat: 780219 Rel: 22 Jun 20
 
studio monitor
Notes: The distillation of Dynaudio's extensive speaker knowledge in a compact two-way nearfield design. Bass response as low as 45Hz thanks to DSP bass extension.

Supplier notes:
This monitor uses sophisticated DSP to extend or its curtail low-frequency response by 10Hz, while Position and Sound Balance controls let you fine-tune for total neutrality in your environment. Its larger 7in woofer helps extend bass, while the low-mass aluminium voice-coil, vented ferrite magnet and MSP driver take care of precision.



Read more
MRP:$541.53 SAVE 16%
 2 in stock $457.58
Click for better price!
or call +44 20 7424 1960
quote 780219
Cat: 780221 Rel: 02 Jul 20
 
Studio monitor
Notes: Larger version of Dynaudio's clever LYD series, combining DSP features with the brand's extensive analogue knowledge to create a mid-priced studio monitor with great performance.

Supplier notes:
Precision, power- and properly honest reproduction. With a pair of LYD 8s taking charge of your music, you can be assured a pitch-perfect performance.

With its 8in MSP woofer and state-of-the-art DSP, LYD 8 provides the kind of performance, precision and bass heft that dreams (and maybe hit albums) are made of. Like the rest of the range, these nearfield monitors let you tune their sound for their position in the room, feature handmade drivers, and contain advanced Class-D amps.
Read more
MRP:$756.12 SAVE 17%
 2 in stock $630.10
Click for better price!
or call +44 20 7424 1960
quote 780221
Cat: 762025 Rel: 23 Jan 20
 
stereo wired earbuds
Notes: EHX HOT LYNX Stereo Wired Earbuds deliver superior sound quality thanks to their 10mm Dynamic Drivers and wide 20Hz - 20kHz frequency response range. They feature a wired in-ear design, tangle-free cable and three ear cushion sizes for maximum comfort and convenience. A three- button remote with Play/Pause, Volume Up and Volume Down plus a built-in microphone give you complete control for listening and hands-free calling. The compact, affordable EHX HOT LYNX are perfect for a trip to the gym, around town or anywhere your next great adventure takes you!
Read more
MRP:$21.46 SAVE 12%
 1 in stock $18.92
Cat: 700960 Rel: 29 Jun 20
 
MIDI interface
Notes: Latest version of the mini synth that began life as a DIY kit. Simple analogue architecture which offers a good introduction to subtractive synthesis and sound design.

Supplier notes:
This project is a reprise of the Sound Lab Mini-Synth with the addition of a Sample and Hold and several circuit and component value changes to improve performance. Even if you already have a Sound Lab, this is thoroughly recommended as a completely new project.New design and a new MIDI INTERFACE onboard.

You can play your SLMS+ with a midi keyboard or midi controller.

Type: Analog Synthesis: Subtractive

Oscillators: 2 Waveforms: Pulse, Pulse Variable, Saw Down, Square Osc Modulation: Envelope, Input, Knob, LFO, Sync Hard

Envelope: 1 Evelope

Paramerters: Attack, Decay, Looping

Filters: 1 Types: 12dB Slope (2-pole), Low Pass, Resonance Filter Modulation: Envelope, Knob, LFO, S&H

Lfo: 1 LFO Parameters: Saw Up, Saw Down, Square, Triangle

Sample & Hold Addon: variable sample rate - output voltage glide - switch to select source to be modulate

Midi cannel: 1 (not exchangeable) Midi port: MIDI IN, MIDI THRU Control change: pitch bend, modulation , portamento (CC 5) 1V/Oct: 5 octaves

IMPORTANT: POWER ON SOUNDLAB WHEN YOUR MIDI SEQUENCER IS IN STOP MODE! MICROCONTROLLER CAN GENERATE MIDI SIGNAL ERROR IF YOUR SEQUENCER IS IN PLAY MODE.

Polyphony: 1 Timbrality

1 Tuning: Standard Modes: Mono

Desktop Controls: Knobs, Switches, Buttons Display Type: LED Dimension: 27 x 16 x 7 (cm) Material: Plexiglass Front panel: Aluminum (1mm thick)

Connections: Audio Output Connections: 1/4" Phone Jack, Mono Out

Power: 9V power supply 300 mA (euro) Audio Output Count: 1 Control voltage: 2 - 1V/Oct (1/4" Phone Jack/3,5 mini jack) Gate in: 1 (1/4" Phone Jack/3,5 mini jack) IMPORTANT NOTE: TO USE GATE/MIDI
Read more
MRP:$302.95
 4 in stock $279.80
Click for better price!
or call +44 20 7424 1960
quote 700960
Cat: 780437 Rel: 23 Jun 20
 
Series module
Notes: Erica Synths Black Pre-fade Listen Expander is a satellite module for Erica Synths Black Stereo Mixer.

Since modular performances are often about uncertainty, unpredictability and sudden filter resonance screams that can kill loudspeakers, it's good to know what is it that you are about to fade into your modular mix and this is where the Black PFL Expander comes in! You can monitor each of four Black Stereo Mixer inputs or any combination of them before mixer level knob takes effect.

NB: Black PFL Expander is designed to work with both Erica Synths Black Stereo Mixer V2 and V3. The module doesn't have a PSU connector therefore it can not be used on it's own.

Technical specifications:

Power consumption:+15mA, -7mA
Module width: 12HP
Module depth: 25mm
Read more
MRP:$108.56 SAVE 53%
 1 in stock $51.54
Click for better price!
or call +44 20 7424 1960
quote 780437
Cat: 753600 Rel: 13 Feb 20
 
6 pod light with sound to light control
Notes: A 6 lamp pod light with built in sound to light control. The product features speed control, sensitivity control and an on/off switch contained in a central pod. The 6 pods containing the lamps can be detached from the central unit to form alternative arrangements.
Read more
 1 in stock $29.75
Notes: White version of IK's clever MTM monitors, which use digital signal processing to analyse your room and ensure the flattest possible frequency and phase response.

Supplier notes:
IK Multimedia has added a white colour option for its iLoudr MTM, a compact reference monitor designed to deliver pristine sound and unprecedented accuracy for the modern professional and home studio. It provides innovative features not found elsewhere, and sound quality that rivals monitors several times the price.

iLoud MTM delivers unsurpassed accuracy, power and bass, 100W RMS power, and a class-defying 40 Hz to 24 kHz frequency response for a "firm", balanced and defined low end, to surpass the sound of speakers twice its size.

IK's advanced DSP expertise was leveraged to offer an ultra-flat frequency response, but more importantly, a truly linear phase response - a premiere feature in this price segment available only on a handful of products costing considerably more. This provides a natural, true-to-life sound made possible by IK's advanced DSP expertise.

The symmetrical MTM (midrange-tweeter-midrange) design provides point-source performance for superior imaging, even at close distances, so users can create mixes that will translate across multiple playback systems, with no ear fatigue. The design's exceptional, controlled sound dispersion enhances the transparency and neutrality by minimizing the impact of room acoustics, for truer monitoring.

iLoud MTM also offers one-touch, acoustic self-calibration derived from IK's award-winning ARC System, with an included reference microphone to easily adjust to any room's acoustics.

Additional features include: 103dB SPL maximum sound pressure; Audiophile-grade, high resolution algorithms and top-of-the line A/D converters; Off-axis response management to minimize the effects of room reverberation; and IK's patent-pending Physical Response Linearization (PRL™) system that corrects the system's performance in real time.

iLoud MTM also comes with a tilting isolation mount that adjusts from 0- to 20- for a wide range of setups, a rubber base for horizontal shelf-placement, and a bottom thread for mic stand mounting.

Incredible accuracy and transparency, deep and defined bass, precise stereo imaging at any distance, and automatic room calibration - all in a monitor that's small enough to fit on any desktop - make iLoud MTM deal for nearfield work or as a workhorse monitor in a home or project studio.
Read more
 4 in stock $316.47
Cat: 763092 Rel: 14 Feb 20
 
audio & MIDI interface
Notes: Next-gen version of the popular iRig Pro Duo offers versatile recording options in a compact, portable package. Two mic/line inputs with phantom power, stereo line outputs, headphone out and MIDI in/out.

Supplier's notes:
IK Multimedia introduces the iRigr Pro Duo I/O, an enhanced, ultra-compact 2-channel audio/MIDI interface that enables high-quality recording on the go with iPhone, iPad, Android devices and Mac/PC. Designed for musicians, podcasters and other content creators, it can accommodate a variety of input sources including microphones, MIDI controllers, line-level and high-impedance instruments such as guitars, basses and keyboards, and more. It can also be used as a MIDI interface.

A sequel to IK's acclaimed iRig Pro Duo, the new iRig Pro Duo I/O features updated mic preamps with increased gain, as well as the addition of a USB-C cable to work with all of today's latest devices and new, dedicated PC drivers to ensure optimal performance on laptops and Surface tablets. In addition, refined volume controls with level indicators for more convenient workflow and a new rubberised finish to better stand up to the road, offer the same standard of quality customers have enjoyed from IK's award-winning iRig Pro I/O single-channel interface.

Recording capabilities
Two analogue combo inputs (1/4" / XLR) are provided for connecting and simultaneously recording any combination of dynamic and condenser microphones and instruments (line level or Hi-Z). They are complemented by Class-A preamps, adjustable gain and 48V phantom power. Each channel has its own input gain control for dialling in the perfect amount of input signal for a particular recording.

iRig Pro Duo I/O can also be used as a MIDI interface via MIDI input and output connectors and included breakout cables. Additional connections include two balanced 14" outputs and headphone output.

A direct monitor switch provides latency-free monitoring of direct incoming signal for use with video or streaming apps, or lets users monitor the processed signal returning from their device when recording music or using audio processing apps.

Out-of-the-box performance
iRig Pro Duo I/O runs on USB bus power or 2 AA batteries (or an optional PSU), and includes Lightning, USB-A and USB-C cables to work with any device right out of the box.

Although compatible with any app designed for high-quality digital audio input for recording or creation, iRig Pro Duo I/O comes with free access to over $/€500 of IK software, apps, and in-app material, making it an all-in-one package with everything needed to record, edit, and share great music, podcasts, interviews and more.

About the iRig series
Celebrating its 10th anniversary in 2020, IK's iRig series of interfaces helped define the mobile music-making category. With products designed for guitarists, vocalists, broadcasters and social media journalists, the series makes high quality audio recording accessible to everyone at an affordable price.
Read more
MRP:$265.08 SAVE 21%
 More than 10 in stock $209.33
Click for better price!
or call +44 20 7424 1960
quote 763092
Iron Maiden Live After Death Action Figure (collectable action figure)
Cat: 767613 Rel: 20 Mar 20
 
action figure
Notes: "That is not dead which can eternal lie..." The official Super7 x Iron Maiden collaboration continues! Eddie from the 1985 Live After Death album comes to life as a 3.75-inch ReAction figure. Eddie has risen!
Read more
 1 in stock $18.15
Iron Maiden: Flight Of Icarus Action Figure (collectable action figure)
Cat: 767609 Rel: 20 Mar 20
 
action figure
Notes: "Fly, on your way, like an eagle. Fly as high as the sun." The official Super7 x Iron Maiden collaboration continues! Eddie from the 1983 Flight of Icarus 7-inch single comes to life as a 3.75-inch ReAction figure! Flight of Icarus Eddie comes with wings and armed with his flame thrower.
Read more
 1 in stock $18.15
Cat: 767616 Rel: 20 Mar 20
 
action figure
Notes: "Caught somewhere in time..." The official Super7 x Iron Maiden collaboration continues! Eddie from the 1986 Somewhere In Time album comes to life as a 3.75-inch ReAction figure! Cyborg Eddie features a clear skull that shows his cyborg brain and comes armed with 2 blaster pistols that he can held or put into holsters.
Read more
 1 in stock $18.15
Cat: 767614 Rel: 20 Mar 20
 
action figure
Notes: "Trapped inside this prison lost and far from home..." The official Super7 x Iron Maiden collaboration continues! Eddie from the 1986 Stranger In A Strange Land single art comes to life as a 3.75-inch ReAction figure. Outlaw Eddie comes with a CLOTH overcoat and armed with 2 blaster pistols that he can held or put into holsters.
Read more
 2 in stock $18.15
Cat: 767608 Rel: 20 Mar 20
 
action figure
Notes: "For The Devil sends The Beast with wrath because he knows the time is short..." The official Super7 x Iron Maiden collaboration continues! The Beast from the 1982 Number of the Beast album comes to life as a 3.75-inch ReAction figure! The Beast comes with pitchfork.
Read more
 1 in stock $18.15
Artículos del 1 al 50 de 10,296 en la página 1 de 206
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z TODO
1  2  3  ...  206  »

Filter

Back Catalogue: All Genres
Release Date
Close