All genres charts

Notes: The BXx2 is a dual channel preamp, EQ and mixer based on the classic Boss BX series mixers. With the inclusion of both input gain and level controls, each channel can be overdriven, producing the signature saturated and lively sound the BX mixers are known for. The EQ controls provide the channels with simple but great sounding high and low shelf EQs for emphasising and shaping sounds and an additional 'Aux' input allows another mixer or extra sound source to be chained in.

Input gain controls

Sets the input gain of the channel preamp. Higher settings will cause source to overdrive the channel.

Inputs

In 1 - Input to channel 1 of the mixer.

In 2 - Input to channel 2 of the mixer.

Aux - Auxillary mix input for chaining with another mixer or extra source.

Fixed gain (-6dB).

EQ High

Sets the gain of the fixed high shelf EQ. Boosts high frequencies when set above 12 o'clock and cuts when set below.

EQ Low

Sets the gain of the fixed low shelf EQ. Boosts low frequencies when set above 12 o'clock and cuts when set below.

Level

Sets the channel level in the mix. Use level controls to trim back volume when overdriving the preamp.

Output

Audio output producing the mix of the 3 inputs.

Technical specifications

Power: +12V 10mA / -12V 10mA
Size: 8HP
Depth: 32mm

The BXx2 was designed in collaboration with Feedback Modules and is based on their single channel 'PRE BX' module.

Notes: The Grado DJ200i is hand engineered for a premium quality rich warm and unique sound, the DJ200i is built and designed to meet the demanding needs of the professional DJ. A step above anything else in this price bracket and many cartridges priced significantly higher.

The Grado specially engineered transmission line cantilever allows for the ideal transfer of music signal and for safe and effective stylus back-cueing. The prestige model DJ200i uses a modified 4 x piece cantilever technology, oxygen free wire in the coils and a specially designed, high polished, diamond mounted in a brass bushing for possibly, the most advanced DJ cartridges ever offered to the professional DJ market.

Notes: Unusual output and mastering module, inspired by studio and radio mastering tools but fitting into just 6hp. Includes multi-band compression, mid/side stereo processing and brickwall limiting.

Supplier's Notes:
Golden Master is a multiband processor module in Eurorack format. Inspired from the studio mastering and radio loudness units from the 90's, this tool is a game changer for everyone who performs live with a Eurorack synthesizer.

The whole magic of Eurorack lies in its raw sound and simple analog mixes - processing through the Golden Master brings instant punch and sound pressure, as well as controlling the overall volume.

Power consumption: 135mA at +12V and 25mA at -12V
Depth: 30 mm (with ribbon cable connected)
HP : 6

Notes: Buchla-inspired modular business in Korg's small and affordable Volca range. Amazingly creative and experimental synth power in a tiny little box. Highly recommended.

Supplier's notes:
A semi-modular analogue synthesizer that makes modular synthesis more accessible and understandable than ever before.
Creating new sounds that don't exist in the outside world is an unending dream which has continued since the birth of electronic musical instruments. This dream has evolved and expanded throughout the development of new and unique music production devices.

The popularity of modular synthesizers around the world has generated new excitement and interest in the so-called "West Coast style" of synthesis that deviates from traditional synthesis norms.
The compact body of this volca synth features eight modules and 50 patch points. While learning the basics of a modular synth, you can use popular features of the volca synthesizer line to control a unique and different flavour of analogue sounds.

Eight modules:
The volca modular is a semi-modular synthesizer consisting of independent analogue synth modules, digital effects, and a sequencer. Each of the modules has been carefully selected for its stand-alone completeness. The modules are internally connected so that sound can be produced even before connecting the included pin cables, and the routing is shown by white lines on the panel. Module connections via a pin cable take priority over the internal connections, bypassing them.

A fusion of West Coast style in a volca format:
Analog synthesizers in which a simple oscillator such as a saw wave or square wave is modified by a filter are referred to as "East Coast style" because of their origin from well-known American manufacturers. Synths of this style, as exemplified by the MS-20, have continued to evolve toward a goal of being used in many mainstream musical genres, thus being equipped with a keyboard for performance. Their sounds are notable for sharp filters and rich presence, and can be heard in many well-known songs.

Patching allows infinite possibilities:
volca modular's modules are connected via the included pin cables, allowing a diverse range of combinations. The unit's compact chassis provides 50 patch points. Inputs and outputs are color-coded for recognition at a glance, and the signals are also marked by symbols to indicate audio, control, gate or trigger. Normally, each signal is connected according to its use, but on the volca modular, signal levels are universally compatible between modules, allowing hidden possibilities to arise from patching that defies common sense. Twenty pin cables are included, and also included is a reference sheet explaining each patch point and providing basic examples of patching.

Sixteen-step sequencer that can automate parameters:
While the volca modular is a semi-modular synth, it is equipped with a full-fledged 16-step sequencer providing a wide range of functions, letting you enjoy automatic performance even when used stand-alone.

Using the 16 buttons familiar from the volca series, you can perform step input or use the buttons as a keyboard for realtime recording. The pattern chaining function plays back multiple sequence patterns in succession, allowing you to connect up to 16 sequences with up to 32, 64, or even 256 steps to create large-scale development.

Randomize function that can generate accidental ideas:
The sequencer of the volca modular lets you specify randomization for notes, active steps, and micro tuning. Irregular phrases, rhythms, and scaling that would be unlikely to come to mind can be generated by applying randomness, letting the volca be a source of unknown ideas.

Two new modes added for sequence playback:
Two new sequence modes have been added: bounce sequence mode which makes a round trip through the steps, and stochastic sequence mode which gradually proceeds while randomly moving forward and backward. Playing back a recorded sequence in a different form can add dramatic changes to your song or performance.

Musically advanced scales, keys, and micro tuning:
Although the volca modular is a West Coast style synthesizer, it also provides flexible support for music as a contemporary instrument. You can choose from 14 types of scale including equal temperament. Since you can also specify the tonic key from which these scales start, you can play these scales in any key.

Connectors that allow synchronized performance and external control:
With a sync jack that allows easy connection to a Korg groove machine, you can connect the volca modular to another volca series unit, a minilogue, monologue, or prologue, an electribe, or the SQ-1, and enjoy sessions with the sequencer synchronized to the playback.

Notes: The UDG Ultimate DIGI Trolley To Go constucted with a solid body structure trolley bag with in-line wheels and a two stage-trolley handle makes it the ideal bag for those long airport walkways. Built for the frequent flying DJ, with room for your valuable digital DJ gear, it has a large central compartment, a removable divider with an organiser section for your audio interface and headphones. A padded laptop sleeve to fit a 15" MacBook Pro is provided to protect your computer with two external pockets and a single internal mesh pocket providing storage for cables and documents. The Digi Trolley To Go is the perfect long distance travelling partner.

Color Black Camo/ Orange Inside
Weight 5,10 kg / 11.22 lbs
Outer Dimensions (W x H x D) cm: 35.5 x 52 x 28 | Inch: 14 x 20.5 x 11
Inner Dimensions (W x H x D) cm: 31 x 39 x 19 | inch: 12.2 x 15.4 x 7.5
Material Water Resistant Nylon 420D
Protection Padded main compartment
Integrated combination lock
Extra's Adjustable divider with organizer panel for audio interface & headphone
Two external accessory pockets+single internal mesh pocket
Retractable handle with 2-stage trolley system
Ergonomic detachable shoulder strap
Fits - Up to 15" laptop, headphone,
- Pioneer DDJ-XP2, DDJ-200, CDJ-800 MK2, CDJ 900, DJM-750 K/S, DJM-800, DJM 850 K/S/W, XDJ-1000, DDJ-WeGO 3/ 4,
- NI Traktor Z2,
- Numark Scratch
- Reloop Digital Jockey-2, RMP-4, RMX-60, RMX-80,
- Denon DN-S3700, DN-X1100, DN-X1600, DN-X1700,
- Akai MPD32,
- Ableton Push,
- Allen & Heath Xone 42, Xone 43C, Xone 62, Xone 92, Xone DB2, Xone DB4,
- Behringer DDM4000,
- Hercules DJ Control Wave,
- Novation Twitch,
- Rane Sixty Two/Two Z, Sixty Eight, Sixty Four,
- Roland Aira MX-1,
- Vestax VCI 100 MK2,

Notes: Part of Xaoc's Leibniz subsystem, which processes signals and voltages by manipulating binary 8-bit numbers, the Poczdam allows switching between two data sources.

Supplier's Notes:
Poczdam is a binary data routing solution for the Xaoc Leibniz Subsystem. It facilitates manual and remote switching between two Leibniz data sources, modifying individual bits of the data stream, and re-clocking the data with its onboard voltage-controlled wideband oscillator or any external clock signal. Poczdam is particularly useful within complex Leibniz setups where the user needs to reconfigure the data flow between multiple modules. However, it can also be employed in small creative patches, e.g., for waveform splicing, disrupting rhythmic loops, or generating digital chaos.
To better understand the device and avoid common pitfalls, it is strongly advised to read through the entire user manual before use.

Component of the Leibniz Binary Subsystem
Routing Leibniz data
Reclocking Leibniz data
Additional CV clock generator (up to 2MHz)

6hp, 30mm deep
Current draw: +20mA/-10mA
Reverse power protection

The high quality Coal Mine black panels are available for all Xaoc Devices modules. Sold separately. Ask your favourite retailer.

Drezno is the input/output front-end of the system, consisting of an analogue-to-digital converter (ADC) and a digital-to-analogue converter (DAC), that alone can be used for manipulating analogue signals and voltages based on their binary representation.

Lipsk is a binary logic processing expander module that can flip (invert) individual bits of the digital signal representation. There are more Leibniz Binary Subsystem elements coming, with specialized and advanced sets of features.

Jena is a digital module that may be used as a flexible waveshaper for CV and audio signals, a wavetable oscillator, a Walsh function generator, or a rhythm generator.

Erfurt is a bi-directional digital counter, frequency divider. It has multiple applications: the output of the counter may be used as a phase source driving a digital wavetable, connected to other Leibniz modules it may scan waveshapes in Jena, produce stepped voltages useful for making interesting glissandi with Drezno and any VCO, generate gate patterns animating the spectrum of Odessa harmonic banks, spawn pseudo-chaotic sequences when fed back to Lipsk, etc.

Notes: A warm and deep sound source you can rely on

A flexible and warm Analog Multifunction Oscillator, rich in harmonics. Excellent for performance use!

ONA can work as an Audio Oscillator or as a Low Frequency Modulator and it provides control over all its parameters, making it a versatile, deep and easy-to-use oscillator.

Thanks to its triangle-core oscillator and wave-shapers you can choose between a big palette of output waveforms to give shape to your ideas.

Classic Waveforms. Sine, Triangle, Saw and Square.

2 Complex Waveforms with Pulse Width Modulation.

2 Sub-Waveforms to add some bass sounds easily.

Blend them to give unlimited depth to your sound!

Notes: Compact, affordable and truly powerful DJ controller from one of our favourite brands. One of the best options for starting out with DJ software. Hook up to a smartphone, tablet or computer and get mixing.

Supplier's Notes:
This compact and powerful 2-channel DJ controller was designed and developed in close partnership with Algoriddim for the tightest integration possible with their award-winning djay app.

The Reloop Buddy offers DJs of any level all the tools they need to perform creatively and efficiently at a high level. Thanks to its powerful features and the brand new Neural Mix controls, the BUDDY is space-saving without compromising any functionality.

Whether you're a complete beginner or an experienced DJ, the Reloop Buddy offers you full control over your mixes thanks to powerful features including the intuitive pad section consisting of 8 performance modes (hot cue, auto loop, touch FX, sampler, slicer, bounce loop, Neural Mix™, looper), dedicated loop controls, a flexible effect section with FX paddles (hold & toggle), and responsive jog wheels for precise mixing and scratching.

Also, the Reloop Buddy includes extensive Neural Mix controls (pad / EQ mode) to isolate beats, instruments, and vocals of any song in real-time for even more creative mixing possibilities.

The Reloop Buddy offers you large FX Paddles with HOLD and ON positions for instant effect mixing.

In terms of outputs, a full headphones cue section and 14 inch jack are conveniently located at the side of the unit, together with an RCA out port for direct connection to active speakers and sound systems.

Thanks to its dedicated integration with Algoriddim's djay software, and built-in USB audio interface, the Reloop Buddy enables instant plug and play compatibility with smartphones, tablets, and computers.

The Reloop Buddy is built from quality, durable materials, and its space-saving, highly-portable design makes it perfect for your home setup, mobile use, and even on-the-go or while traveling. Furthermore, its built-in device slot can hold smartphones and tablets up to 12.9", which keeps the overall footprint of the unit to a minimum.

Not only can tracks be loaded to djay from your crates and libraries, but it's also even possible to mix millions of tracks instantly from popular streaming services such Tidal*, Soundcloud Go+*, Beatport LINK*, and Beatsource LINK*.

*Please note: An internet connection and a TIDAL Premium or HiFi subscription, Soundcloud GO+ subscription is required. Beatport Link and Beatsource Link are accessible with all 3 offered subscriptions.

HIGHLIGHTS:

Compact performance controller for djay across all platforms (iOS/Mac/PC)

Powerful features: FX paddles, sound filters and 8 performance modes

Neural Mix controls for real-time vocal and instrumental separation

Notes: Portable recording made with musicians in mind, the R4 records up to four tracks in 32-bit float resolution, with on-board EQ and effects, amp simulation and the option to bounce recordings down then overdub.

Supplier's Notes:
The Little Recorder For Big Ideas

Introducing the Zoom R4 MultiTrak

Designed By Musicians

All of our engineers are musicians and they designed the R4 to empower musicians to explore big ideas. With a unique dedicated 'bounce track' and 32-bit float recording, the R4 is perfect for capturing your most ambitious compositions.

Record. Bounce. Repeat.

With the R4, you can record up to four tracks, mix and then bounce them to the dedicated 'bounce track.' This lets you free up additional tracks to keep adding layers.

You can choose to do a 'quick' bounce or mix and bounce in real time.

The R4 also allows you to 'undo' your last bounce, if you're not satisfied with the results.

32-Bit Float Recording

The R4 captures perfect audio with every take, without the need to set gain.

Combo Inputs

The R4 has 2 XLR/TS combo inputs with legendary Zoom preamps. You can plug in microphones, instruments, keyboards, and more.

Track Effects

Each track features a 3-band EQ, pan, echo, and reverb to refine your mix.

Input Effects

Apply effects to input A such as amp simulations, delays, distortions and more.

Built-In Microphone

The R4 features a high-quality built-in microphone, perfect for acoustic guitars, vocals, or capturing a quick reference recording.

Much More Than A Metronome

The R4 has a rhythm section preloaded with over 80 different drum patterns to play along with featuring genres such as rock, hip hop, funk, heavy metal, and more.

Every Take Is Saved

Tracks that you record are automatically saved individually, even after they have been bounced.

32-Bit Float Audio Interface

The R4 is also a powerful 2-in/ 2-out USB audio interface with 32-bit float technology. Connect it to either your computer or smartphone.

Control and Create

With a fader for each track and dedicated hardware buttons for the most used functions, you won't need to menu dive to record your music.

Powered For Your Ideas

The R4 can be powered by 4 AA Batteries, or through its USB-C port.

Specs

Inputs/outputs
Inputs: Built-in mic (mono): 1
XLR/TS inputs (mono): 2
Output: Headphones: 1

Inputs
XLR/TRS inputs:
Connectors: 2 XLR/TRS combo jacks (Balanced, XLR: 2 HOT)
Input gain: No adjustment required (dual A/D converter circuit used)
Input impedance XLR: 2.3 kO; TS: 1 MO
Maximum input level: XLR: +4 dBu, TS: +10 dBu
Phantom power: +48 V (switchable separately for INPUTS A and B)
Equivalent input noise: XLR: -120 dBu or less (IHF-A); TS: -107 dBu or less (IHF-A)
Frequency response: XLR: -0.5 /+0.0 dB : 20 Hz - 20 kHz; TS: -0.2 /+0.0 dB : 20 Hz - 20 kHz

Built-in mic input
Directionality: Omnidirectional
Input gain: No adjustment required (dual A/D converter circuit used)
Maximum sound pressure input:
115 dB SPL
Output

Headphone

Connector: 1 stereo 3.5mm mini jack
Output impedance: 10 O
Maximum output level: 20 mW + 20 mW (into 32O load)

Recorder

Maximum simultaneous recording tracks: 2
Recording format: WAV: 48kHz, 32-bit float, mono
Recording media: Cards compatible with microSDHC specifications 4 GB - 32 GB; Cards compatible with microSDXC specifications 64 GB - 1 TB

Display: 2" full-colour LCD (240 × 320)

USB

Connector: USB Type-C
Note: Use a USB cable that supports data transfer. USB bus power is supported.
Audio interface function
Class: USB 2.0 High Speed
Sampling frequency: 48 kHz
Bit rate: 24-bit/32-bit float
Input / output channels: 2 in/2 out
Mass storage function: USB2.0 High Speed

Power supply

Batteries: 4 AA (alkaline, lithium, or rechargeable NiMH)
AC adapter: ZOOM AD-17 (5V/1.0A)
* USB bus power is supported.
Estimated continuous operation time using batteries

Alkaline batteries: about 7 hours
NiMH batteries (1900 mAh): about 6 hours
Lithium batteries: about 14 hours
* Use conditions: Recording 1 track, playing 1 track, phantom power off, headphones into 32O load, power saving on
* The above values are approximate. * Continuous battery operation times were determined using in-house testing methods. They will vary greatly according to use conditions.

Power consumption: 5 W
External dimensions: 74 mm (W) × 138 mm (D) × 36 mm (H)
Weight (including batteries): 287 g
Note: 0 dBu = 0.775 Vrms

Notes: Back in 2008, the original Z5000 was not only the world's first Eurorack DSP effects module but also the first Tiptop Audio module released. It brought voltage controlled digital effects to Eurorack for the first time and the Z5000 was eventually replaced by the Z-DSP open source platform. Now, years later with over a decade of experience developing audio effects for Eurorack signals we are introducing a totally new version of the Z5000: a compact stereo 8HP multi effect with voltage controlled parameters, VC analogue clock generator driving the DSP chip and 24 of our creme de la creme reverbs, delays, modulation, harmonization and pitch modulated effects. A number of programs in the Z5000 combine more than one effect, in series or parallel, that represent studio techniques from-the early days till modern times often leaning toward the more experimental side.

Notes: The MUSE DRIVER - Andy Timmons Full Range Overdrive is an overdrive workstation that allows you to orchestrate everything from a clean boost to a treble supercharger, a chimey tube-amp overdrive to a square-wave, germanium fuzz generator and more.

This Pedal combines a three-control blues driver circuit with two switches for the voicing of Drive and Tone characteristics. Robert and Andy developed these switches to give players a broad range of drive tones. The Drive toggle engages two germanium diodes for a smoother, slightly compressed drive. Switch to Andy's clipping style for a brighter and more articulate attack.

Every part of the circuit has been optimized for tone and the demanding needs of a recording and touring artist such as Andy Timmons. Simply adding the MUSE DRIVER to your pedalboard will make your rig sound better. This professional grade overdrive can be switched between true-bypass and buffered bypass at any time.

Andy Timmons - Tone Switch

This drive pedal gives you two tone control circuits to choose from. When the Tone Switch is up and in the AT Position the tone control features Andy's preferred voicing and low-end response. Each note in a chord is clear and articulate. If the Tone Switch is down and in the RK Position that features the legendary Phat Boost providing more low-end frequency response, perfect for pushing up vintage or single coil pickups.

Full Range Overdrive - Germanium Toggle Switch

The MUSE DRIVER combines JFET saturation, diode clipping, and op-amp clipping in order to create its harmonically rich tone. Drive Switch UP for AT Clipping - this mode features asymmetrical LED and silicon diode clipping and is Andy's Super AT Mod sound. Drive Switch Down for RK Clipping - now the circuit features two germanium diodes for clipping. This mode can sound a bit like a vintage fuzz pedal with a softer, smoother feel.

Muse Driver - Buffered Bypass or True Bypass

The pedal features our industry leading buffer for noise-free switching. Keeley Electronics have developed a buffer which not only makes your rig sound better, it gives you silent switching with no tone loss. Switch between true-bypass and buffered on the fly. Simply press and hold the foot switch for two seconds and the pedal will switch between true-bypass and buffered bypass! You decide what works best in your rig.

Made In The USA

Keeley Electronics design, engineer, and manufacture the Keeley Electronics/Andy Timmons MUSE DRIVER in Oklahoma City. Everything about the MUSE DRIVER is geared towards the professional musician and their quest for an inspiring tone when performance demands it. From the meticulously built circuit boards to the newly fabricated aluminium enclosure; we make guitar effect pedals like finely crafted musical instruments.

Notes: Reverse-engineered from the original machine, our BD909 is an identical recreation of the original all-analog drum circuit of the TR-909. We've added additional controls and synthesis features that turn this classic circuit into a chest-pounding analog bass drum laboratory - all tightly packed into an 8HP module. The BD909 sound differs from our BD808 in that the main sonic energy is centered in the mid to low frequency range (as opposed to the low frequency range of the BD808). This frequency range gives the needed headroom allowing your bass Lines to deeply fill up the low end while the kick drum rides on top - creating a clear and punchy mix.

The BD909 includes all the controls found in the original: Attack, Decay, Tune Decay, Accent and Level. We have gone beyond that and added controls that further increase the palette of sound this circuit is capable of. First off, we've added a tuning control knob for the oscillator and included its own CV input and attenuator that let you tune your 909 kick with your bass lines. Next, we added control knobs for the tuning attack and extending tuning decay - each one affects the other, allowing for very intuitive and interactive sound shaping - this feature opens up numerous "sweet spots", and provides the ability to center the energy peak at different parts of the sound. Finally, we offer additional punch and distortion by giving complete control over the internal waveshaper, which allows you to overload the waveform manually or with voltage control.

Beginning with the classic and pure sound of the 909 kick, these additional functions greatly expand the BD909's flexibility and let it create powerful analog bass drums that range from soft and smooth to punchy and aggressive - and everything in between.

Notes: Numark add an extra channel to the classic scratch mixer format, bringing additional flexibility and performance options. Three-band EQ/kills per channel plus a mic input for versatility.

Supplier's Notes:
Bonus inputs for total performance.

M4 is a three-channel tabletop mixer designed for any DJ who needs maximum flexibility. It features a replaceable crossfader with reverse and slope controls, a 1/4" microphone input with EQ, and plenty of routing for phono and line level devices.

Where M4 really shines is its impressive input section. Two switchable phono/line inputs plus four more dedicated line inputs give you a total of SIX inputs! Add Master and Record outputs, and steep three-band EQ/rotary kills on each channel, and you've a powerhouse package that's ready to handle whatever the gig throws at you.

M4 has the inputs, controls, and features to turn what would be a problem for the average mixer into a simple plug-in. Don't get stuck without enough inputs at your next gig. Upgrade to M4.

Inputs:
Line: 10K ohm input impedance; 80mV RMS sensitivity for 0dB output
Mic: 600 ohm input impedance unbalanced; 1.5mV RMS sensitivity for 0dB output; 400mV RMS max input
Phono: 47k ohm input impedance; 1.3mV RMS sensitivity @ 1kHz for 0dB output

Outputs:
Line: 7V RMS max
Headphone: 0.5W into 47ohm

Signal to Noise Ratio:
(maximum output JIS-A weighted)
Line: Better than 100dB
Mic: Better than 95dB
Phono: Better than 85dB

Frequency response:
Line: 20 - 20,000 Hz i0.5dB
Mic: 20 - 15,000 Hz i0.5dB
Phono: i1dB; -3dB attenuation at 20 Hz to reduce rumble and feedback

Channel Equalizer:
Bass: +12 / -35dB at 20 Hz
Mid: +12 / -25dB at 1.3 kHz
Treble: +12 / -20dB at 15 kHz

Channel fader kill: Better than 90dB at 1 kHz

Crossfader kill: Better than 75dB

Crosstalk: Better than 80dB at 1 kHz

Distortion: Less than 0.05%

Notes: Premium analogue delay from Erica's flagship Black Series range. Two bucket brigade device delay lines work simultaneously with smooth crossfading and tons of voltage control. Lovely.

Supplier's Notes:
Erica Black Series include high-end, unique functionality and superior quality modules. Only the best, highest quality components are used, all inputs and outputs are protected against undesired overvoltage. When designing Black Series, put design and usability superior. Big knobs are assigned to functions that make difference in sound. Erica Black series consist of range of modules that are needed to put together entire synth. Enjoy!

The Erica Synths Black BBD is one of kind analogue delay module. It features two BBD lines: short, 1024 stage and long, 4096 stage, that work simultaneously and you can smoothly fade between those two, thus creating distinct multitap effect.

Furthermore, an advanced BBD clock noise cancellation circuit is implemented that reduces unwanted BBD noise without filtering higher frequencies of audio signal. Most of parameters are voltage controlled, which allows to integrate the module in complex modular setups.

Time

This is delay time manual control.

Because of BBD clock suspension circuit, delay time can be pushed in extremely long regions, however in that case BBD clock noise may appear. The Time CV is added to the knob setting.

In level

This is the input attenuator switch. Select among full amplitude, half amplitude and audio off.

BBD mode

This control smoothly fades between short and long delays. Any setting in-between will result in distinct multitap delay effect.

LFO rate

Adjust the internal modulation LFO rate. The internal LFO controls delay time, and it's automatically disengaged, when an external modulation signal is connected. The LED gives visual feedback on the LFO rate.

LFO shape

Select the LFO shape. Three shapes are available - triangle, square and in-between shape - mix of triangle and square.

Input

This is the audio input of the module. This is manual Dry/Wet mix. The MIX CV is added to the knob setting.

Colour

Even though the module has BBD clock suspension circuit, the colour switch provides extra lowpass filtering of the signal. At top setting no filtering is applied, at lower settings increasing filtering is present.

Feedback

This is the delay feedback manual control. In extreme clockwise settings the module goes into self-oscillation, and by adjusting delay time and BBD mode settings, the module becomes a drone machine. The FBK CV is added to the knob setting.

CV level

This is the Time CV level attenuator. If nothing is patched into TIME CV socket, it controls the internal LFO amplitude.

WET out

This is the WET signal output of the module - use it for advanced patches.

Out

This is the main output of the module.

Time CV; FBK CV; Mix CV;
These are CV inputs for Time, Feedback and Dry/Wet mix.

SPECS:
Audio level 10Vptp
CV level (full span) -5V - +5V
Power consumption +95mA, -81mA
Module width 12HP
Module depth 35mm

Notes: Amp Academy Pedal

The Amp Academy is a complete valve amp modelling rig in a compact stomp box format. 3 storable scenes with 2 channels, selectable from 6 separate classic amplifier models. Each patch has Gain, Master and Boost for overdriven tones and 3-band EQ + Presence control. As with a real professional tube amp, there is an effects loop and internal rever effect. The addition of a noise gate helps to keep everything silent when no notes are played. Balanced or unbalanced outputs give flexible options for live performances via FRFR speakers, mixing console, or even for direct recording. All settings are fully editable via USB using the proprietary Amp Academy software and even self-made or third party IRs can be loaded for custom amp modelling. Next time you are carrying your heavy valve amplifier around, consider this incredibly flexible and pocket-sized alternative.

Power supply: 9Vdc, 100mA (min) pin-negative (not included)
Controls: Gain, Master, Boost, NR, Bass, Middle, Treble, Presence
Connections: Guitar in/out (6.3mm), Loop (6.3mm TRS), Aux (3.5mm), DI (XLR)
Dimensions: 115 x 105 x 58mm
Weight: 440g

Notes: QEG Quad Loopable ADSR Envelope Generator with 16 Trigger and Mix Outs

Quad Version of FEG plus Trigger Outs

Mix Out ( normal and reversed) of all envelopes for multistage applications

Very exponential "snappy" course and rounded

Edges for a compressed "bonky" sound

Two time zones are offered

Remote control via CV of two time zones

Loopzone from Attack to Release

One shot mode for trigger signals

Jumper at the back for reset mode

Manual Trigger button

Normal and Inverse Output

Trigger Outs for each section: Begin of Attack, End of Attack, End of Sustain, End of Release

Power consumption: 120 mA (+12 V) / 100 mA (-12 V)
Rackspace: 20HP
Depth: 25mm

Notes: While modular synthesisers are most often used as stand-alone instruments, they also present exciting opportunities for processing external signals. Anything from an electric guitar to an effects send on a studio mixing desk can benefit from the unique sonic capabilities of even a modest Eurorack system.

However, patching in an external source usually requires an adapter cable and plenty of clean gain to bring the signal to Eurorack level. If the signal source is balanced, a balanced input is required as well to provide the best possible interference rejection.

Receive 2 (or RX2 for short) provides a convenient all-in-one solution. It offers two universal external inputs, which accept both balanced or single-ended signals via XLR or 6.35 mm jack connectors.

The circuit incorporates low-impedance design practices, radio-frequency (RF) filtering and premium balanced receivers to provide transformer-like interconnect performance in a compact and affordable module. And thanks to the electrostatic discharge (ESD) protection, it’s rugged enough to survive the rigours of performing on the road.

The very clean integrated pre-amps feature variable gain, ranging from unity to +40 dB on each channel. As a result, Receive 2 can handle just about any signal source you may encounter, including electric instruments, piezoelectric pickups and many dynamic microphones.

Adjusting the gains is a breeze thanks to the dual peak-responding LED meters. A mix output is included as well, so external signals can be easily mixed directly in the module.

Notes: VCO:

- Tune: manual tune control (with an internal jumper the range can be set to ~ +/-1 half an octave or ~ +/-2.5 octaves)
- Oct: range switch -1 / 0 / +1 octave
- Mod: modulation depth (attenuator wired to the Mod. socket)
- Dest: switch that is used to address the modulation to frequency modulation (position FM) or pulsewidth modulation (positon PM), in centre positon no modulation
- PW: manual pulsewidth control for rectangle waveform, PW can be also modulated by the Mod. input as mentioned above
- Wave: waveform switch (sawtooth / off / triangle), the sum of the waveform chosen by this switch and the rectangle is fed into the VCF (to turn the rectangle off the PW control has to be set fully CCW or fully CW)
- 1V/Oct. (socket): external CV input for VCO frequency (1V/octave)
- Access to internal bus CV (via jumper, optional, please remove the bus jumper if this feature is not used to avoid unwanted frequency modulation as then the unused CV line of the bus works as a kind of antenna)
- Triangle core VCO, frequency range about 32Hz ... 8kHz

Balance unit:

- The balance unit is made of two VCAs which are controlled by the sum of manual Balance control and the balance CV input in the opposite direction.
- The audio input of VCA1 is hard-wired to the VCO output, audio input 2 is connected to the socket Ext.In.
- The output of the balance unit is used as audio input for the VCF
- Bal.: manual balance control, fully CCW the internal VCO is used, fully CW the external signal (Ext.In) is used, at centre position both signals have about the same level
- CV Bal.: CV input for balance (range about 0...+5V)
- Ext. In: external audio input for VCA2, about 5 Vpp level required for similar loudness as the internal VCO
- This socket is normalled to the internal VCO suboctave f/2 signal (rectangle with half the frequency), if no external signal is applied the suboctave signal is used as the second signal for the balance unit

VCF:

- 24 dB low pass
- Frq: manual frequency control
- FM1: frequency modulation depth (attenuator wired to the VCF FM1 socket, the socket is normalled to the internal Envelope signal and then FM1 controls the modulation depth of the internal envelope applied to the filter)
- FM2 (socket) : second CV input for VCF without attenuator (about 1V/octave), can be used e.g. for VCF tracking by connecting the same CV which is used also for the VCO frequency
- Res: manual resonance control (up to self oscillation)
- If the VCO is turned off (waveform switch = centre position, pulsewidth control = fully CCW or CW) and the VCF resonance is set to maximum the module can be used as a sine oscillator, the tracking at socket VCF FM2 is about 1V/octave (not as precise as the VCO but much better than most other filters)
- ~ 11 octaves frequency range (~ 10 Hz ... 20kHz)

VCA:

- Gain: manual amplitude control (initial gain), can be used to open the VCA without envelope signal
- VCA (switch): used to switch between gate and envelope as control signal for the VCA, in centre position the VCA is not controlled by envelope or gate
- Note: when gate is used the VCA is controlled directly by the gate signal (i.e. hard on/off), this may lead to clicking noise under certain conditions (especially with low VCO/VCF frequencies)
- Special control scale: exponential scale in the range from about -20dB to -80/90dB, linear scale from about -20dB to 0dB
- Remark: this special control scale results in a loudness behaviour that is a bit different from pure linear or exponential VCAs
- Out: audio output of the module (= VCA output)

Envelope:

- Gate (socket): Gate input (min. +5V), can be normalled to the bus gate signal by means of a jumper
- Att: manual control for Attack
- D/R: manual control for Decay/Release
- Env. (switch): used to switch between A/D, ADSR and A/R mode of the envelope generator, in centre position (ADSR) the sustain level is fixed to about 50%
- Envelope (socket): envelope output (about +10V)
- CVT (socket): CV input for time control, by means of two internal jumpers one can select which time parameters are controlled by the CVT input (e.g. A only or D/R only or A/D/R) and in which direction (i.e. if an increasing CVT shortens or stretches the time parameter in question)
- Envelope LED display
- Attack time range: ~ 1ms ... 5 sec (can be extended by using the CVT input)
- Decay/Release time range: ~ 1ms ... 15 sec (can be extended by using the CVT input)

Notes: The A-100LC1v is a smaller version of the A-100LC3 with 48 HP of space. It is made out of raw wood, a black coating gives the Eurorack frame a vintage look. The built-in power supply, type A-100SSB, delivers up to 380 mA at +12 V and -12 V as well as 100 mA at +5 V.

The A-100LC1v comes equipped with one 48 HP measuring row for 3U modules. Its power supply features eight connectors for oscillators, filters and so forth. The case is connected to the grid via an IEC power socket.

Notes: More bang for your buck? Omnitronic's four-channel offering is a competitively priced alternative to entry-level mixers from Pioneer or A&H. Built-in mp3 playback from USBs and audio streaming over Bluetooth.

Supplier notes:
- 4 input channels with gain control, LED level meter, 3-band equalizer, cue button and channel fader
- DJ microphone channel with level control, 2-band equalizer, on/off and talkover switch
- Integrated Bluetooth audio streaming for your smartphones and tablets
- MP3 player with USB port and blue LCD screen
- Pre-fader listening to all input channels and the master output via adjustable stereo headphones output
- Crossfader with assignment switches and adjustable curve
- Master channel with level and balance control
- 10-digit stereo LED level meter
- Adjustable monitor output (DJ booth)
- 10 line and 2 phono inputs via RCA jacks
- Balanced XLR and RCA outputs
- Record output, independent of the master

Notes: The Pitch Forkr+ features two independent pitch shifting engines with full control over each. Both will transpose your pitch up or down over a +/- three octave range and detune +/-99 cents. With rock solid tracking, an organic, musical tone and extensive control, it's your ultimate harmonizer.

Notes: 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analog Dry/Wet control with dedicated CV input. High quality stereo signal pass. Assignable CV input to effect controls or to Sample Rate reducer (changes internal clock). Four user storable presets - stores selected program and all three controls. Spin FV-1 based.

The last used effect, assigns and presets are always remembered.

32 effects are simultaneously available, but FX AID can be reflashed with other user selected Happy Nerding effects in any order. Also the possibility to run freely available third party effects will be added too.

Reflashing procedure is quite easy: playing 40 sec long "wav" file of line level amplitude to CV input.

Reflashing mode: hold both buttons for 10 sec.

Please note the reverse CV operation of the Dry/Wet control: positive CV crossfades from Wet to Dry, and negative CV crossfades from Dry to Wet.

By default it runs on 32.77 kHz and, if sample rate reduction assign is used, this sample rate can be decreased down to 150 Hz or brought up to 48 kHz.

80 mA +12V
30 mA -12V
45 mm deep

Notes: Possibly the best value DJ isolator on the market. Classic three-band design with full kill on each band, allowing you to perform dramatic filter effects. Joe Claussell vibes on a budget.

Supplier's Notes:
3-band frequency isolator with vintage rotary knobs for DJs

With the Omnitronic ISO-23 MK2 frequency isolator DJs get an effective tool for creative sound shaping in the club or studio. Using high-grade, long-life ALPS RK27 potentiometers, the rack-mounted isolator has excellent sound characteristics.

The large, smooth rotary knobs enable DJs to radically boost or cut low, mid or high frequencies, making it easy to create instrumental or a cappella versions. The isolator provides XLR and RCA connectors and features a bypass switch for bridging.

Control range: kill to +9 dB
Lows: 20 Hz - 300 Hz
Mids: 300 Hz - 4 kHz
Highs: 4 kHz - 20 kHz

Bypass switch
Balanced and unbalanced inputs/outputs (XLR/RCA)
Incl. mounting brackets for 483 mm rack installation (1 U)
(19") 48.3 cm rack installation 1 U

Power supply:
100-240 V AC, 50/60 Hz

Power consumption: 12 W

Isolators:
Master Gain:- 8 bis +9
Low/mid 300 Hz, 18db/oct , Butterworth
Mid/high 4000 Hz, 18db/oct , Butterworth

Connections:
Input: 2 x line via 3-pin XLR
Input: 2 x line via RCA (f) mounting version
Output: 2 x line via 3-pin XLR
Output: 2 x line via RCA (f) mounting version

Max. level:
Input: +22 dBu
Housing design:
(19") 48.3 cm rack installation 1 U

Width: 48.3 cm
Height: 4.45 cm
Depth: 14.5 cm
Weight: 2.15 kg

Review: The vast array of Depeche Mode originals cover plenty of ground and many years of hard and critically acclaimed work. As such they're a gold mine for artists looking to add their own spin and plenty of the most ear-grabbing of those radio, dub and club mixes are collected together here on a rather epic seven slabs of wax in one bumper box set with a poster and digital download. Works by contemporary artists like Trentemoller and Justus Kohncke sit next to techno titans like Ben Klock, trance mainstays such as Sander Van Doorn and even EDM stars like Laidback Luke. A varied mix with something for everyone.

Notes: Small desktop enclosure for Eurorack modules with 42 HP space and a maximum depth of 32mm. A relatively strong power solution with an external power supply and an on/off switch located at the case is included.

The power supply provides:

- 850 mA at +12V
- 850mA at -12V
- 500mA at +5V

The power distribution has 14 connectors and the case can house exactly fourteen modules from Erica's Pico Series.

Notes: uBurst

This is a new build of the micro version of Mutable Instruments Clouds. The module retains all the functions of the original Clouds, taking up significantly less rack space.

These modules use tall bushing potentiometers to offer a more stable feel.

The module is fully assembled, tested, and calibrated. Eurorack power cable is included.

Notes: The Oxygen Pro 49 is a powerful, 49-key USB powered MIDI controller that allows you to create the music you want to make even easier! The new Oxygen Pro controllers open up worlds of expression and creativity and make bringing your production ideas to life more seamless than ever. Taking feedback from users and artists alike, these controllers are the ultimate studio and live performance tools, allowing you to keep your focus on creating music-not programming your software. It doesn't matter if you want to create music on the go or in the studio, the M-Audio Oxygen Pro series is perfectly flexible for your workflow.

It's simple to use the Oxygen Pro 49 controller with any DAW with the Oxygen Pro 49's automatically mapped controls such as Transport, Faders, Channel controls (Record Arm, Solo, Mute, and Select), Pan controls and more. Whether you use Ableton, Pro Tools, MPC Beats, Cubase, Logic, Studio One or any other major DAW, just select your DAW in the Oxygen Pro 49 and select the correct configuration in your DAW, and the Oxygen Pro 49's controls will be completely integrated into your DAW! It also instantly maps to all the virtual instruments included with the Oxygen Pro 49 (Velvet, Mini Grand, Vacuum, Boom, DB33, Xpand!2). These world-class Air Music Tech plugins can be fully controlled by the Oxygen Pro 49 and used in real-time as you create and mix your music.

With Smart Chord and Smart Scale technology, creating music and transferring what's in your imagination to what you hear coming out of your computer has never been easier!

With Smart Chord activated, pressing a single key or pad will play a full chord rather than just one note. The key or pad you press will determine the root note in the chord. The rest of the chord's properties (Major, Minor, and Voicing - 1,3,5; 1,3,7; 1,3,5,7, etc.) are determined by the settings you choose. Smart Chord also has a Custom Mode which lets you to determine the chord structure that will be assigned to each key by manually playing it. For example, if you select Custom Mode, and play a 1-b3-5-b7 chord, every key will then be assigned to play this chord structure. The note of the key you press will serve as the root of the chord and all of the parameters can be edited right on the Oxygen Pro 49!

The Oxygen Pro 49 also features intelligent Smart Scale technology. With Smart Scale, you can set the key bed so that only notes in the selected scale are able to be played. This allows you to play within a chosen scale without the risk of playing any "wrong" notes. You can choose from 16 different scale variations when assigning a scale to the keyboard. Smart Scale is easy to activate and deactivate and allows you to set the scale parameters you need to keep you focused on creating.

Built into the Oxygen Pro 49 are features that are essential to creating modern day pop, electronic, hip hop, and dance music. Note Repeat and the built-in Arpeggiator open up a world of precise music production and live sound techniques to make your music sound professional.

Note Repeat allows you to hold down any of the custom-made M-Audio performance pads and you'll hear a repeated rhythmic pattern at a selectable note division. The Note Repeat feature can be activated momentarily or can be used in Latch mode. If you choose Momentary, holding the Note Repeat button will make the note played by the pad automatically repeat. If you choose Latch, pressing any pad will cause its assigned note to repeat without you having to hold down the Note Repeat button.

The built-in Arpeggiator will affect anything you are playing on the keys from any virtual instrument in your DAW. When the Arpeggiator is activated, the keyboard will repeatedly play the pressed keys in sequence. The arpeggiator's timing and rhythm is based on the keyboard's time division setting and either the keyboard's or your DAW's tempo setting. Each note in the arpeggio will be the length you've selected for the time division setting; for example, if you select 1/4, each note in the arpeggio will be a quarter note. This powerful tool can operate in Latch or Momentary mode, making it easy to unleash your creativity.

What's In The Box:

Oxygen Pro 49
USB Cable
Software Download Card
Quickstart Guide
Safety & Warranty Manual

Dimensions: 10.4" x 31.5" x 3.3" 264.2 x 800.1 x 83.8 mm

Weight: 9.3 lbs/4.2 kg

Notes: The Heart and SOL of Your Pedalboard

SOL is the ultimate solution for bringing life to a small to medium-sized pedalboard setup, especially if you are using power-hungry pedals. SOL is the smallest mains-powered switch-mode power supply we make at CIOKS (no wall-warts here) and the no-frills design plus massive power will leave you free to focus on your creative spark. Featuring the same 660mA at 9V DC per outlet and four switchable voltages on each outlet as its bigger brother CIOKS DC7, SOL is the most powerful small form-factor power supply available today with a total of 30 watts of DC power available.

Specifcations

Mains input: 100-240V AC universal
Outlet 1-5:
9V DC / 660mA or
12V DC / 500mA or
15V DC / 400mA
or 18V DC / 330mA each
Total output power: max. 30W

What's in the box

9 Flex cables included:
3 x 1030 - Type 1 - 5,5/2,1mm DC plug, centre negative, L-shape, 30cm (black)
2 x 1050 - Type 1 - 5,5/2,1mm DC plug, centre negative, L-shape, 50cm (black)
1 x 2050 - Type 2 - 5,5/2,1mm DC plug, centre positive, L-shape, 50cm (red)
1 x 4050 - Type 4 - 5,5/2,5mm DC plug, centre positive, L-shape, 50cm (green)
1 x 1035 - Split Flex type 1 - 30 & 50cm (black)
1 x 1533 - 3-way daisy chain Flex type 1, 30+30+50cm (black) Included in the box
SOL power supply
AC mains power cord (region specific)
Mounting hardware for Pedaltrain and Templeaudio boards (two screws and one hex-key)
Product manual
Flex Guide
CIOKS sticker sheet

Notes: Designed to play nicely with guitars and synths alike, this OTA-based mono phase shifter excels at warm, characterful modulation. Three Eurorack-compatible patch points add creative options.

Supplier's Notes:
Lethargy derives from the greek word for forgetfulness, "Lethe". It is a state of being drowsy and dull. The feeling of having little energy or of being unable or unwilling to do anything.

Dreadbox LETHARGY is an OTA based Phase Shifter effect pedal suitable for fretted instruments and synthesizers, with eurorack patch compatibility.

100 mm wide
140 mm high
90 mA / 9 V DC / Negative Center

SPECIFICATIONS:

Circuit: Analog

Bypass: CMOS

Audio: Mono

Inputs / Outputs:
IN/OUT : TS Unbalanced 6.4mm jack
Manual / Rate / LFO Out : 3.5mm mini jack

Power Supply: 9VDC BOSS style center pin negative 2.1mm (NOT INCLUDED)

Dimensions (cm): 14 x 10 x 5.6

Current Draw: 90mA

Notes: Lo-fi looks, killer sound. Serious filth here from Death By Audio. Surprising versatility with simple controls, offering mild overdrive if you want but specialising in grimy fuzz.

Supplier's Notes:
Call in the Army, the Navy, Scotland Yard, your mom, and the Mario Brothers! You'll need all the help you can get to stop this endless wall of fuzz from raging! This kill-all circuit explodes the meanest, nastiest, most insane distortion to make you the ruler of the fuzz universe.

This Death By Audio pedal has hand spray-painted graphics covering up meaty components and sound, giving you a high-tech fuzz mutilator at a punk rock price. With three knobs it can create a multitude of ultimate fuzz, boost, overdrive, and distortion sounds. Listen for yourself and you will see, this is the thickest-sounding sustaining fuzz pedal we have ever heard.

Controls

Volume: Controls the overall output level.

Fuzz: Controls the gain of the fuzz circuit. At its lowest setting the pedal just acts as a tone shifter. As the fuzz knob is turned up it sweeps from a booster to an overdrive to a thick distortion to a full on blown out war of fuzz.

Tone: A specially designed multi-curve shaping filter which changes the timbre of the pedal from super deep bass sludge to screaming highs.

Specs

Dimensions: 5.87" x 4.72" x 2.5" (including hardware)
Weight: 18 oz.
Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery)
Current Draw: 1 mA

Notes: Add external feedback loops, tilt filters and more to the Timiszoara effects module with this versatile expander. A must-have for Timiszoara owners.

Supplier's Notes:
Deva is an expander for Xaoc Devices' Timiszoara multi-fx module designed for creative exploration of the dirty/nasty side of signal processing. Deva opens up the Timiszoara programs you've come to love with some unexpected twists and turns along the way. The analog side features two external feedback loops (for the left and right channel) with tilt filters adjustable via sliders with two additional switches for choosing positive or negative feedback (for each channel). The third slider controls the DAC clock - from overclocking by a factor of two down to 16-times slower, so you can go from chipmunk to hardcore teeth gnashing of underclocked goodness. A switch allows for turning the clock control off for normal/regular operation. All features have inputs for external CV.

Technical details

Eurorack synth compatible
8hp, skiff friendly
Power drawn from Timiszoara: +60mA/ -50mA
Reverse power protection

Notes: Xkey Air

The Bluetooth Mobile Music Keyboard

Ultra Slim. Great Design.

Lighter than an iPad!

Xkey Air is made from rugged, brushed aluminium. The same material that is used in Macs.

It only weighs 610g (1.34 lbs) so you won't even know it's there. Pop it in your backpack, or use the optional Xkey carry case.

Mac. iPhone / iPad.

(PC and Android can be connected with the WIDI BUD accessory)

Slip Xkey Air into your backpack or carry case and you're good to go.
Connect it to your favourite device, launch your favorite app ... and your recording studio is open for business. Xkey Air is pro standard. But even if you're still learning to play the keyboard, you'll love the quality and features.

Wireless & Low Latency

Bluetooth 4 MIDI controller. Low latency!

Long Battery Life

Powered by a lithium battery for hours of music creation

Aluminium Body

Robust, high quality construction. Looks great. Same finish as a MacBook.
Customizable

Download the free Xkey Plus application. Configure your keyboard how you like it.

100% MIDI

Use Xkey with your favorite music apps on your favorite devices. Works out of the box.

Mobile Native

For iPhone or iPad. Compatible with hundreds of free and pro apps.

Polyphonic Aftertouch

Your pressure on the keys controls the effect individually. Professional studio standard feature.

Portable

Made for travellers and mobile users. Fit in any bag & case!


Regular Updates

Benefit from upcoming new features. Upgrade your Xkey online!


Smart Buttons

Octave Change, Pitch Bend, Modulation, and Sustain function buttons

Velocity Sensitive

Play loud with one hand, soft with the other. There's 128 levels of sensitivity.

Controls
25 full-size keys (2 octaves).
100% MIDI compliant.
Velocity sensitive.
Polyphonic aftertouch.
Pressure sensitive Pitch bend and Modulation buttons, with continuous MIDI control data.
Octave +/- push buttons.
Sustain button.
Rechargeable Lithium Battery.
Firmware upgradable via USB.
Configurable via Xkey Plus free app for iOS, Mac OSX, and Windows.

Connectors
MIDI: USB and Bluetooth.
Indicator LEDs: Activity, Connection state, Battery

Dimensions
Width: 388 mm (15.27 in)
Height: 135 mm (5.31 in)
Depth: 16 mm (0.62 in)
Weight: only 610 g (1.34 lb): less than an iPad!

Power consumption
~ 125mW / 25mA
Included in package
Xkey Air (25 keys)
CME Xkey Air 25 (Bluetooth) Quickstart Guide.
Micro USB cable.

Notes: Huge chorus-flanger. Take your music to infinity. The fully analogue Dreadbox Komorebi Chorus-Flanger Pedal gives you a huge array of sound design possibilities. This powerful pedal can add some serious impact to your sound.

It doesn't matter if you're playing bass, guitar, synths, or even if you want to hook it up to your modular Eurorack system. The Komorebi is ready to go. Sprinkling its beautiful effects over anything it touches.

From a slight pinch of flange to add some movement to your bass lines, or a lengthy chorus effect to treat your pads and chords to a final touch of space-age wideness. It's a guitar pedal but not as you know. Komorebi works with everything.

Current draw: 100mA

Notes: Delta-V is a fully analogue dual-channel function generator, featuring a dedicated VCA and LFO cycle switch for each channel. It packs a great deal of functionality in only 10HP, and will surely find use in almost every patch.

Generate envelopes, slew gates and signals, or run LFOs with precise control over attack and decay times. Using the SHAPE knob, Delta-v can create a wide range of envelopes, from very snappy exponential curves for percussion to logarithmic thumps for bass lines.

If VCA's input is unpatched, the module outputs a regular voltage envelope. When an audio signal is patched into the VCA input, the output signal becomes the audio signal amplified by the envelope.

Sending other envelopes or an LFO to VCA input lets you modulate those modulators, quickly creating complex control voltages that go beyond the usual attack-decay envelope.

Combine this with the SUM output, which sums the two channels, and the attenuverters, which can quickly attenuate or invert the signal, and you have a whole array of signal processing capabilities.

The TRIGGER input fires a Attack-Decay envelope, while the SLEW input will affect the rate of change of the signal.

The trigger for channel 1 and 2 can be linked together, so you can fire two envelopes with one patch cable.

Each channel has an End of Cycle output, (EOC) this outputs a short trigger at the end of each envelope cycle.

The output voltage ranges from -10 to +10 volts, set with handy output attenuverters.

The CYCLE switch starts looping the envelope, creating LFO's that go up to audio rate, and that can also be used as an interesting sound source.

There are many ways to utilise Delta-V.

Challenge yourself to explore new, unconventional territories!


Width: 10HP
Depth: 27MM
Power: +12V 70 MA
Power: -12V 70 MA
Power 5V: 0 MA

Notes: DJ Controller Case XDJ-RX3/RX2

Customized to hold the new Pioneer XDJ-RX3 or XDJ-RX2 DJ-Controller. Crafted from 9 mm vinyl laminated plywood, sturdy aluminum profiles and heavy duty butterfly latches, this case provides ultimate protection for mobile use on the road.

Fits

Pioneer XDJ-RX3
Pioneer XDJ-RX2

Specs

Outer measures: 80,5 x 53 x 20,5 cm
Inner measures: 72,5 x 37,4 x 7,5 cm (Controller-compartment)
Weight: 12,9 kg

Notes: The entry-level option to get started with Akai's MPC workflow. Hardware controller for the MPC 2 software, which runs on Mac or PC. Features 16 MPC pads and a new assignable touch strip.

Supplier's Notes:
MPC Studio is a Complete MPC System

MPC Studio brings the total MPC experience to your computer by combining intuitive hardware control and innovative, inspiring software. Load a loop from the library, chop it into samples, lay down a beat, then play instruments over it to add more melodic textures. Add some insert effects to develop your song structure and arrangement, or to build drops and transitions. MPC Studio makes your workflow one continuous stream of non-stop creativity.

Premium Pads for Perfect Production

Pad performance is the top priority for any beat maker. With MPC Studio, you can be confident that every beat and note will be right on time, every time. Velocity-sensitive RGB pads mean maximum expression, whether you're playing soft melodies or booming kick drums with coloured visuals to keep track of your velocities and pad groupings. Switch from Note to Chord Mode quickly and build out your tracks right as inspiration strikes.

Assignable Touch Strip Control and Expression

Create your own signature sounds with the assignable Touch Strip. This fluid controller bends and shapes your sounds however you want. Make that pad synth more mysterious with a swell, control the roll of your hi-hats to fill your trap drumbeat, or make that guitar part more realistic by articulating the strum right where you need it. Assign any of the numerous knobs, sliders, and parameters to the Touch Strip for new and inventive manipulation of any track. Add dynamic and real-time Touch Strip effects for the ultimate live production and performance.

Colour Screen for Vibrant Feedback

When you're locked in the creative moment, the vibrant colour screen ensures you can keep your hands on the MPC Studio and your focus on the music. Whether you need to trim a waveform, browse through instruments, samples, and plugin presets, or adjust parameters on the fly, the screen gives you the visual feedback you need in a moment's glance without having to stop your workflow and reach for your laptop. When it comes to your musical efficiency, every moment matters, and every move needs to help you effectively capture your ideas to finish your songs faster.

World-Class Plugins & Effects

MPC Studio includes an extended palette of sounds, instruments, drum samples, loops, insert effects, and much more to both spark your creativity and complete any music project or task. With over 100 instrument and effects plugins combined, MPC Studio can tackle any style or genre of music with rich, inspiring sound. The modern-day beat making insert effects plugins are powered by award-winning AIR Music Tech. with powerful editing, arranging, and mixing tools including the AIR Vocal Suite. Create, record, and mix the perfect vocals with the Vocal Suite to add everything from pitch correction, to harmonising, to thickening your vocals and audio tracks with the AIR Doubler.

Includes MPC2 Software

Akai Professional's acclaimed MPC2 Software works seamlessly with MPC Studio for the ultimate beat making and music production experience. This cutting-edge production suite and DAW combines 128-track sequencing capability, real-time time stretching, advanced MIDI editing capability, VST compatibility, and numerous plugin instruments and Insert Effects for creating and mastering professional finished songs and tracks. MPC2 software has a dedicated set of plugins to record and produce the perfect vocal recordings with the AIR Vocal Suite including automatic vocal tuning, vocal doubling, and vocal harmonising. Legendary plugin instruments including AIR Hype, AIR Mellotron, AIR Solina, and WayOutWare Odyssey, among others, offer a plethora of world-class sounds and presets to sculpt the perfect master track. A massive suite of modern plugin Insert Effects powered by AIR Music Tech - including a Limiter for finalising tracks - rounds out the infinite music and beat making possibilities.

Includes Loop Content From: Decap, F9 Audio, Mvp Loops, Rawcutz, Snipe Young, and more.

Technical Specifications:
Pads: (16) velocity- and pressure-sensitive pads, RGB-backlit, (8) banks accessible via Pad Bank buttons Knobs
Knobs: (1) 360- push encoder for display navigation and selection
Touch Strip: (1) multi-function 5.5" (140 mm) touch-capacitive controller with LED indicators
Buttons: (39) LED backlit dedicated function buttons
Display: Full-colour LCD
Connections (1) 1/8-inch (3.5 mm) MIDI input, (1) 1/8-inch (3.5 mm) MIDI output, (1) USB Type-B port
Power: via USB
Dimensions (width x depth x length): 12.0" x 6.7" x 1.5"/305 x 171 x 37mm
Weight 1.8 lbs./0.83kg

Notes: Endorphin.es add to the ranks of clever 1U format modules with this take on their Cockpit four-channel stereo mixer. Simple design including a CV/trig input for sidechain compression/ducking.

Supplier's Notes:
Endorphin.es Cockpit² is a 4-channel stereo mixer with side-chain ducking.

Key facts:

Increased headroom
Improved sound quality
the LEDs are blue/red instead of red/green (Daltonic friendly)
No TRRS jacks anymore
New knobs on the black module version
Power consumption: 37mA at +12 V and 23mA at -12 V

Depth: 41mm

HP : 24

Notes: The window comparator is a very useful circuit building block that is common in general electronics, but rarely found in modular synths. While a regular comparator activates when the input signal voltage is higher than a threshold level, a window comparator checks if the voltage is between two levels (these form the 'window').

Compare 2 combines two such comparators and a logic section in 8 HP. The result is an advanced tool for extracting gates and pulses from analogue signals in Eurorack synths.

The detection windows are defined by the shift and size parameters, which can be varied using the knobs and CV inputs. Complementary gate outputs are available, with big three-colour LEDs showing each comparator's status.

All inputs are normalised from the left section to the right, but the two comparators can also be used completely independently. On the bottom, the outputs from both comparators are combined in various ways by the logic section, which also features LEDs.

You'll find a use for this truly multi-functional module in practically any patch, processing either CV or audio: complex rhythm generator, dual pulse width modulator, frequency multiplier/divider with PWM, digital ‘ring modulator’ with PWM, dynamic depth VCO synchronizer, voltage controlled swing, logic function array with adjustable thresholds... and many more applications waiting to be discovered!

Notes: For decades, the voltage controlled slew limiter has been a staple of modular synthesisers. With its extreme versatility, it can be used to slew control voltages (CVs), create envelopes, as a low-frequency or audio oscillator and much more.

Today, Contour 1 brings a fresh approach to this classic circuit. It delivers much improved performance and control by incorporating modern design techniques.

At its most basic, a slew limiter slows down the rate of voltage change in a signal. On Contour 1, the rising and falling rates can be individually set using sliders and CV modulation.

The gate and trigger inputs allow the module to be used as a function generator: create snappy attack-release (AR) and attack-decay (AD) envelopes, with slope times ranging from 500 us to 30 seconds. The dedicated gate input makes it easy to generate +10 V envelopes from any signal source. Using the large tactile push button, AD envelopes can be manually triggered. A trigger will also reset the output voltage.

When set to loop mode, Contour 1 will continually re-trigger itself. In this mode, it fulfils the role of a variable-shape low-frequency oscillator (LFO) or temperature-stable voltage controlled oscillator (VCO) in the audio range.

Both the rising and falling slopes can be individually bent, from concave through linear to convex. While doing so, the deviation in slope time, and thus oscillation frequency, is kept to a minimum. Since the bend parameters are separately voltage controllable, boundless modulation possibilities present themselves.

Explore anything from shape-shifting envelopes to rich VCO timbres: Contour 1 will make you re-think what a slew limiter can do.

Dimensions
8 HP
30 mm deep

Current Draw
90 mA +12V
85 mA -12V

Notes: Excellent value upgrade to standard hi-fi turntable styluses. Designed for smooth sound with a balanced tonal presentation. Hand built in Brooklyn by experienced audiophile specialists.

Supplier notes:
The Silver3 uses a four piece OTL cantilever with a Grado specific elliptical diamond stylus mounted on a brass bushing. A machined turned generator is used to achieve a lower distortion and greater transparency.

What's the difference between Gold3 and Silver3?
Approximately 5% of the Silver2 production runs meet higher test specifications. The cartridges that exhibit these specs are hand-selected to become a Gold2.
Grado's OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system.

This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

Grado's OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

The Silver3 are all hand assembled by our team in Brooklyn, with some builders having over 25 years of experience. With the recent development of the highly received Lineage Series of cartridges, we were able to have a trickle down of technology and bring some new techniques to the Silver3.

This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. Our coil winding techniques, using ultra high purity copper wire which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.

As in all Grado phono cartridges the Silver2 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado's patented Flux-Bridger design allows the Silver2 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

The development of the Epoch in the Lineage Series gave us an in-depth experience with using an outer housing as a damping device. This led to the creation of a process which de-stresses the chassis and dissipates unwanted energy & resonant frequencies, allowing the desired signal to travel freely.

Notes: The A-143 series of modules contain multiple modulation sources. Module A-143-2 is a four-fold ADSR type envelope generator. Other modules of this series are the Complex Envelope Generator A-143-1 (Quad AD) and the Quad LFO A-143-3.

The module contains 4 independent ADSR-type envelope generators. Each sub-module has available the controls Attack, Decay, Sustain and Release. The three-position Range switch allows to select the desired time range (low - high - medium). The adjustable envelope time ranges from several minutes to some milliseconds. On top of this each sub-module is equipped with three digital outputs (high/low): "End of Attack (EOA)", "End of Decay (EOD)" and "End of Release (EOR)". As soon as the criterion is valid (e.g. end of decay state) the corresponding digital outputs turns to "high". These outputs can be used e.g. to daisy-chain several ADSR sub-modules. For this the digital output in question (EOA, EOD or EOR) has to be connected to the Gate input of the following ADSR. Even automatically running envelopes (pseudo LFOs) or so-called "quadrature envelopes" with cyclical modulations of several ring-shaped, daisy-chained ADSRs are possible. To obtain a pseudo LFO simply the EOD or EOR output has to be connected to the Gate input of the same ADSR.

In addition to the obligatory Gate (G) input for envelope generators each sub-module has available a Retrigger (Rt) input. The retrigger turns the direction to "upward" if the envelope has already reached the decay state while the retrigger pulse occurs. If the envelope is still in the attack phase the retrigger input has no meaning. This a different behaviour from A-140 and A-141!

The Gate inputs of the units 2, 3 and 4 are normalled to the Gate input of unit 1, i.e. Gate input 1 is connected to the switching contacts of the Gate input sockets 2, 3 and 4. Thus one Gate signal applied to Gate input 1 can be used to trigger all four sub-modules simultaneously.

The envelope outputs are displayed with LEDs.

The maximal envelope voltage (Attack/Decay reversal point) is about +8V.

If voltage control of all parameters is required module A-141 is available.

Notes: The original MiniMod Glide +Noise module was based exactly on the original Minimoog Model D circuitry, which was designed to be used with the built in Model D keyboard, and because of its vintage design its range was severely limited to 5 or 6 octaves, and it also responded to positive voltages only. Another limitation was that it would not return fully to zero when selecting long glide times, which restricted the range even more.

So we made the decision to re-design the MiniMod Glide + Noise using modern precision parts, and we have come up with an all new circuit which has exactly the same function, but with a hugely extended range. It has the same Glide slope characteristic (a slightly curved Linear Glide) as the Model D on which the MiniMod is based, however in response to many requests from customers we have adjusted the glide up and down speeds so that they are now very similar , which is much more useful in real world applications that the earlier MK1 version which (like the Model D) would glide up considerably faster than it would glide down.

The new Mk2 MiniMod Glide Noise module now has an impressive 14 octave range, and can respond to negative voltages down to -5V. This is a very useful feature, as our MiniMod VCO's will respond to negative control voltages and produce correspondingly low frequencies; so it is now possible to glide down quickly or slowly to crazy sub bass levels! The hold feature has been improved too, it covers the full audio range as well as DC control voltages, and works as a track and hold module with Eurorack signal levels.

A further enhancement is that the Mk2 module can now (using selectable jumpers) transmit or receive pitch CV to the Eurorack power bus; for example, the Glide CV Output can now be directed to the Bus in order to send CV's to (for example) three VCO's via the bus without the need for a passive multi and four patch cords!

The Noise section of the module is unchanged, except that we have slightly boosted the level of the Red Noise output to bring it more in line with Eurorack control voltage levels.

Lastly, it is much shallower - Mk1 Glide Noise had a depth of 54mm, and it was the only MiniMod module that was too deep to fit a skiff style case - and this prevented a full MiniMod system being installed into a shallow Eurorack case. The new MK2 version is only 28mm deep, so this allows both it and a full MiniMod system to be mounted into shallow skiff style Eurorack cases.

Dimensions: 6HP wide, 26mm Deep
Current draw: 36mA Positive, 38mA Negative

Notes: The Listen Four Quarters is a four channel stereo mixer with 1/4" (6.35mm) TRS balanced outputs and 1/8" (3.5mm) headphones output. Two mono channels with Pan knobs and two stereo channels with dual inputs provide optimal compatibility with both stereo and mono signals. The Listen Four Quarters can be daisy-chained to other Listen modules to create a larger mixer with sub-mix outputs.

Notes: Versatile stereo digital filter based on Endorphin's Grand Terminal module. CV-controlled cutoff, resonance and separate high-pass filter. Simple but effective.

Supplier notes:
The Squawk Dirty To Me is a stereo filter with voltage controlled resonance. It features eight filter modes and zero-delay feedback.

- Simple and effective 6hp stereo VCF
- 8 filter modes available with meta CV scanning, famous zero-delay feedback Grand Terminal filters
- Additional hi-pass filter in series quickly cuts the boomy low end