All genres charts

Notes: Reissued version of one of Dreadbox's back catalogue synths, the Erebus is a paraphonic design with two VCOs, a characterful low-pass filter, built-in delay and updated snappy envelopes.

Supplier's Notes:
Dreadbox's most unique sounding analogue synthesizer is finally back, warmer and snappier than ever!

All you synth lovers, the time has come to dive into the Erebus...

All Analogue Paraphonic Synthesizer
Faithful Reproduction of the Erebus V1
2 Oscillators with 2 Waveforms each
Separate Glide controls and Hard Sync function
2-pole Low Pass pre-fed Filter
1 ADSR envelope and a AR Amp Envelope
Snappier than the V1

OTA VCA
Lo-Fi Delay effect
Wide Range LFO
15 patch points for an astonishing and spectacular modular experience
Compact, USB powered, Eurorack Format (42HP)

Ethereal & Dreamy

Warm sounding Oscillators
Classic Dreadbox Filter
Snappy Envelope Generators
Lo-Fi Delay effect to expand your sound
CV outputs: Envelope, LFO, Mod Wheel, Gate, CV1, CV2
CV inputs: Osc1, Osc2, Echo, Cutoff, CV, Gate, LFO Rate, PW, VCA

Specifications & Connections

USB powered (1.5 Watts)
50 Playing hours with 20,000mA portable power bank
MIDI IN via DIN5
14 MONO TS Jack Out

Dimensions: 21.5 x 13 x 6.5 cm
Weight: 1 kg

Requirements:

USB-A Adapter (5v) with 1000mA or more
MIDI device or keyboard that is equipped with DIN5 midi output
Monitor, Amp or Headphones

Included in the box:

Erebus Eurorack module
42 HP case
1x DIN5 to 3.5mm adapter
1x Ribbon cable

Notes: Stereo Field is one instrument with three uses. It is simultaneously a stereo/quad modular touch plate feedback atonal synthesizer, a stereo/quad audio processor and a pressure sensitive chaotic CV "controller". All three uses are available separately as well as simultaneously and in conversation with each other.

The Stereo Field allows its user to manipulate and patch two analogue stereo preamp circuits via touch plates. By utilizing skin conductivity as new paths for current to follow you are creating "new circuits" and new sounds in relation to where your fingers are patching. The individual touch plates are directly connected to nearly every connection point of every component in its circuitry (located directly under each corresponding touch plate).

When touched with multiple fingers it will create atonal analogue feedback with either of the two mirrored circuits represented by interlocking touch-plate circles. The resulting feedback can go beyond the abilities of human hearing (take caution!) and down to the very slow clicks of a saw waveform and both can often be happening simultaneously. These parallel mirrored circuits can be finger patched separately or together yielding vastly different chaotic results in regards to texture, timbre and stereo imaging. This instrument has the ability to create atonal synth tones in stereo (and quad) as well as process incoming stereo audio (and quad) sources via 1/4" and 3.5mm ins and outs. Incoming audio sources can be "patched" or rewoven into any area of either or both of the circuits via skin contact.

The two stereo input volume knobs (centre) shape and effect distortion, drive amounts, internal feedback pitch, and modulation rates depending on how your fingers are patching. The quad inputs and outputs via the 3.5mm jacks have small touch plates leading to and from allowing for touch access of each of the 4 inputs and 4 outputs. If multiple audio signals are traveling into the Stereo Field these audio sources can be intermingled and can modulate one another, again depending upon where your fingers are patching.

Sending CV signals into the 3.5mm input jacks will open up many more possibilities both in terms of synthesized sounds and audio processing. Since the two stereo circuits are mirror images of one another the 3.5mm ins and outs can also be thought of as (L/R,R/L) and when your hands get involved this imaging will be further confused and jumbled as your skin can intermingle all of these paths.

The Stereo Field can also be used as a controlled chaos source when using the 3.5mm outputs to send the feedback your hands create as CV to your modular system. Due to the nature of feedback and finger patching the 4 available CV signals have the ability to get incredibly complex, organic and textured in nature (see audio examples below in use with a euro-rack system). Because of the open nature of Stereo Field it can both send and receive CV modulation simultaneously. In addition, this can all be happening while your finger patching is changing and altering the incoming and outgoing CV while also processing incoming audio. These ins and outs can also be patched together with cables for sustained tones with the pitch/rhythm/volume/"cutoff" being affected by adjusting the incoming and outgoing volume knobs in various settings. Inter-patching in this way will also allow for sustained pulse beats and filter-esque sound shaping in addition to bringing new results to finger patching via the touch plates.

Most importantly, processed audio and synthesized audio are available simultaneously with the ability to influence and modulate each other. This will often blur the lines between the two; who is manipulating who, who comes out on top as audio and who is modulation? This can be a constantly evolving cycle based upon where the performers fingers are placed and highly sensitive skin contact pressure changes.

Notes: A serious, serious synth. PPG-esque wavetable synthesis with huge 24-voice polyphony, dual analogue filters and four-part multitimbrality. Incredible sound, incredible versatility.

Supplier's Notes:
The 3rd Wave is a powerhouse wavetable synth with 24-voice polyphony and 4-part multi-timbral capability that's like having four independent synthesizers at your fingerprints.

Each of its 3 oscillators per voice can be:

A classic PPG-era wavetable
A high-resolution complex wavetable
An analogue-modelled waveform
Create up to 64 custom wavetables of your own using the built-in Wavemaker. With sample-to-wavetable capability, you can connect an audio source to the audio input and generate a wavetable at the touch of a button.

Classic legacy; modern sound

While the 3rd Wave has roots in the classic digital wavetable synths of the past, it takes that concept into the 21st century with a lush, expansive sound that's a product of its expanded wavetables and warm, organic-sounding analogue filters

It boasts not only a punchy, Dave Rossum-designed 2140 analogue low-pass filter with variable saturation, but a second, SEM-style state-variable filter (low-pass, high-pass, notch, and band-pass) for additional tone-sculpting. Run both filters in series for harmonically complex textures.

4-part; multi-timbral

With 24-voices, the 3rd Wave has enough power for the most note-intensive performances.

And that polyphony really comes into play with its ability to layer up to 4 independent parts or split zones - each with a completely different sound, sequence, and dual effect.

Each stereo part has independent panning, volume, and a dedicated stereo physical output.

Modulation Matrix

The secret weapon of any synth is its mod matrix, and the 3rd Wave doesn't disappoint.

With 16 assignable slots, 12 additional fixed-source slots, 27 sources, and 114 destinations, it has the flexibility of a modular.

And all of this power is per multipart. That means up to 4 independent layers of sound, each with its own mod matrix.

Sequence notes; songs & params

The 3rd Wave's sequencer is an inspiring tool for both composers and sound designers because it is pattern-based and can sequence notes, songs, and parameter changes.

For composing and performing, enter notes and chords in real time with or without quantization for maximum groove and arrange up to 24 patterns of up to 32 measures in length into songs just as easily.

Specs

Sound Engine

3 High-resolution Digital Oscillators Per Voice
64 total user wavetable positions with 48 wavetables that contain 64 waveforms per table (32 legacy PPG waves with room for another 16 of this type)
32 original 8 bit wavetables from the PPG 2 series instruments with room for 16 more user created 8 bit wavetables
7 high-resolution modelled analogue waveforms (sine, saw, triangle, supersaw, pulse, white noise, pink noise)

VCO sync

Linear FM
6-stage wave envelope per oscillator with variable time and position that can be looped
Optional wave flow section that allows for no wavetable as well as no waveform interpolation
Upper wavetable mode as with the original PPG 2 series
Unison mode and chord mode with variable voice count

1 Analogue Low-pass Filter

Dave Rossum designed, classic, 2140 low-pass resonant filter
24 db per octave slope
variable saturation amount
optional resonance compensation

1 State-Variable Filter

12 db per octave slope
Continuously variable between low-pass, notch, and high-pass, operation with optional band-pass mode

4 ADSR+ Delay Envelopes

Filter, Amplifier, plus 2 additional envelopes switchable between exponential and vintage PPG-style response
Freely assignable to multiple modulation destinations

4 Low-Frequency Oscillators

Triangle, sawtooth, reverse sawtooth, square, pulse 1, pulse 2, pulse 3, and random (S&H)
Variable delay
Note reset
Syncable to master clock BPM

2 Digital Effects

BBD, stereo delay, tape delay, chorus, phaser, flanger, distortion pedal, rotating speaker, ring mod, room reverb, hall reverb, super plate reverb - most modelled on famous hardware devices
Syncable to master clock BPM
Parameters modulatable via mod matrix

Wavemaker Tool: Built-In Custom Wavetable Maker

"Sample-to-wave" functionality. Connect an audio source to the 3rd Wave's Audio In port, press "Make Waves" and the synth samples the audio to create a custom wavetable
Samples to convert can also be brought in as a 96 kHz wav file through USB
Store up to 32 custom wavetables
64 waveforms per wavetable
Accepts pitched or un-pitched material as input
96 kHz sampling rate
16-bit resolution
1024 cycles per waveform, converted automatically to cover entire keyboard range
Flexible wave-sampling length
Imports Serum wavetables

Sequencer: Performs both Note and Parameter Sequencing

4 parts per sequence
24 sequences per preset
Up to 32 measures per sequence
Variable quantization resolution per sequence (32nd, 16th, 8th, quarter, half, whole note, or quantization off), that is settable in real time
Variable swing

Arpeggiator: 1 Arp per Multi-part
Up, down, up/down, and assign modes
Variable range (1, 2, or 3 octaves)

Mod Matrix: 16-slot Modulation Matrix Per Multi-Part

16 slot modulation matrix with 27 mod sources and 114 mod destinations
12 additional fixed-source mod paths
Modulation assignment buttons enable quick and easy modulation routing
Mod Matrix runs at audio rates
Sequencer can record and play mod parameter changes in real time

Controls

77 knobs and 39 buttons enable deep, comprehensive editing with minimal menu diving
Pitch and Mod Wheels
Full-sized, five-octave, semi-weighted, premium Fatar keyboard with velocity and aftertouch

Programs

500 factory programs. User rewritable

In/out

4 Stereo outputs (2x 1/4" phone jack per part)
Headphone out (stereo 1/4" phone jack)
MIDI In, MIDI Out, and MIDI Thru
USB port for bidirectional MIDI communication
Audio Input for creating user wavetables from external audio source (1/4" phone jack)
Audio Input can also route audio through the filters, output chain, and effects
Sustain/footswitch input
Volume pedal input
Expression pedal input

Power

1 universal IEC AC power inlet for internal power supply
Operates worldwide on voltages between 100-240v, 50-60 Hz, 65 watts maximum power consumption

Dimensions

Shipping Box Dimensions: 44 x 20 x 13 inches, 35 lbs
Synth Dimensions: 38.5 x 14.25 x 5 inches, 27 lbs

Notes: When Waldorf introduced the Quantum in 2018 it immediately found its way in the studios and hearts of the most acclaimed film composers, producers, musicians and sound designers. Now five years later Waldorf have released an upgrade of the flagship Quantum synthesizer called "Quantum MK2".

Quantum MK2 was upgraded with a 61 keys polyphonic aftertouch keybed from Fatar, increased sampling storage to 59 GB, improved mechanical design and display. The new 3.0 firmware allows for up to 16 digital or any combination using the 8 analogue filter with additional 8 digital.

What's new?

61 keys Fatar TP8/SK with aftertouch

The Quantum MK2 is the first instrument which presents a 61 keys Fatar TP8/SK polyphonic aftertouch keybed to the world. With its increased possibilities for musical and gestural expression the keybed allows to utilize the enormous modulation capabilities of the Quantum synthesis engine. It is a next level of expression based on a traditional keybed, which keeps all playing capabilities of a musician, and then extends it with an additional dimension of control and creativity.

The polyphonic aftertouch is highly customizable in multiple dimensions globally as well as for individual keys. The high-resolution graphical display supports visual feedback and control for the customization process. In addition to its internal poly aftertouch keybed, the Quantum MK2 can be controlled by any MPE capable controller by directly connecting to Quantum's USB host port.

16 voices of polyphony, digital and analogue filters

Based on an 8 voice analogue dual-filter architecture, the Quantum has been opened up for up to 16 voices of polyphony in any combination of using digital dual multi-mode filters with the 8 analogue ones. Moreover the combination of analogue with digital filter opens up new sonic possibilities of what Waldorf Music stands for since its beginning: Hybrid digital and analogue synthesis. A new set of allocation modes gives the musician an easy control.

59 GB sampling storage

Another cornerstone of "The Quantum Mark 2" is its increased internal sampling storage from a few GB to 59 GB. The Quantum has quickly become the instrument of choice for modern advanced sampling capabilities for sound enthusiasts and cinematic composers from Berlin to Los Angeles. From firmware 1.0 to 3.0 Waldorf Music has listened to the requests and needs of musicians to extend it polyphonic granular sampling engine as well its traditional multi-sample engine.
Design and display

The updated mechanical design and a classy naval blue presents the musician an instrument of beauty and inspiration. The improved mounting of the high-resolution touch display provides wider viewing angles and an intuitive way of controlling the more advanced features of the Quantum synthesis engine.
Sounds and samples

Highly acclaimed sound designers from all over the world have contributed to the huge library of factory presets and an initial sample content of 2 GB. Waldorf Music is proud to have sounds from designers like Richard Devine, Howard Scarr, Reinhold Heil, BT, Matt Johnson, Joerg Huettner, Kevin Schroeder, Sascha Dikiciyan, Kurt Ader, Mike Huckaby, Thorsten Quaeschning and many more. All sounds are compatible with Waldorf's Iridium instruments in both directions.

Synthesis Platform

Waldorf Music has updated and improved its Quantum firmware continuously adding new synthesis capabilities and many feature requests by musicians. The Quantum firmware builds together with the Iridium firmware a "Waldorf Synthesis Platform".

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Dreadbox go back to their roots with this reissued analogue beast. Simple but effective single-oscillator monophonic design with a three-pole resonant filter and analogue distortion.

Supplier's Notes:
Dreadbox's highly anticipated Bass Synthesizer is finally back.

Its Deep and Dark sound is here to haunt you ...

All Analogue Bass Synthesizer
Faithful Reproduction of the 2016 Hades
1 Oscillators with 2 Sub Octaves and 2 Waveforms with PW control
3-pole Resonating Low Pass Filter
1 AD/RS envelope and a AR Amp Envelope

OTA VCA
OTA Distortion
Wide Range Triangle LFO
11 patch points for an astonishing spectacular modular experience
Compact, USB powered, Eurorack Format (42HP)

Monophonic Epicness
Super Fat Oscillator
2x Sub Octaves for extra headroom
Special Internal Bass Boost Circuit
Warm Filter
Drive effect for aggressive sounds
CV outputs: Envelope, LFO, Mod Wheel, 1v/oct
CV inputs: PW, Cutoff, VCA, CV, Gate

Specifications & Connections

USB powered (1.5 Watts)
50 Playing hours with 20,000mA portable power bank
MIDI IN via DIN5
14 MONO TS Jack Out

Dimensions: 21.5 x 13 x 6.5 cm
Weight: 0.9 kg

Requirements

USB-A Adapter (5v) with 1000mA or more
MIDI device or keyboard that is equipped with DIN5 midi output
Monitor, Amp or Headphones

Included in the box

Hades Eurorack module
42 HP case
1x DIN5 to 3.5mm adapter (specs as found at midi.org)
1x Ribbon cable

Notes: Special edition Platinum version of the excellent Opsix SE. Metallic finish, aluminium front panel, stainless steel sides and the same powerful FM synth engine as the standard Opsix SE.

Supplier's Notes:
Special limited edition of opsix SE.

Celebrating the release of the long awaited opsix SE, a stunning Platinum model (*) will be available in very limited quantities. While this model shares the same features as the standard model, it boasts a high-end metallic finish with an aluminum front panel and stainless steel side panels. This magnificent instrument is bound to command attention, whether on stage or in the studio.

(*) Differences are only cosmetic, specifications are exactly the same as the standard model. opsix SE Platinum also includes an exclusive set of stickers.

The Ultimate Union of Power and Performance

opsix SE is a digital synth like no other. With a premium all-metal design, 61-keys, and aftertouch, it unlocks a new world of sonic capabilities. Building on the expansive sound engine in the original opsix, opsix SE enhances it with increased polyphony and voicing, resulting in a synthesizer created for superior performance and precise control.

The opsix Operator Mixer simplified FM synthesis for the first time, making it not just comprehensible but also controllable. With the addition of extra synthesis capabilities and programming, it offered a more efficient workflow and an even richer sound.

The opsix SE takes this even further. It is equipped with Korg's premium 61-key natural-touch keyboard, complete with aftertouch, delivering the exceptional tactile experience expected from Korg's flagship workstations. With a sleek, robust metal body, it's built for both the intensity of live gigs and the precision of studio sessions. The metallic knobs are optimally weighted for effortless adjustments. Underneath its exterior, the opsix SE boasts an incredible capacity of 80 stereo voices of polyphony.

The opsix SE arrives preloaded with hundreds of sounds enhanced for aftertouch control. Moreover, it is fully compatible with the sounds and samples from both the original opsix and the opsix Native software, including numerous high-quality libraries.

Build to play

opsix SE was born out of the desire to play this incredible synth with both hands. Equipped with KORG's premium 61-note natural-touch keyboard, the opsix SE offers the same outstanding tactile response as KORG's top-tier workstations. Aftertouch puts unparalleled control of all the exceptional opsix sounds at your fingertips. Of course, we've modernized the factory Performances for aftertouch and introduced some fresh ones to the mix as well. In fact, most of the opsix SE programs have been revised to make full use of aftertouch, extended keyboard, and polyphony.

Premium metal design

The opsix SE showcases a notable upgrade in aesthetics. A slim body, specifically designed for this instrument, features a striking brown painted aluminium control panel, paying homage to vintage machines. Together with the vivid, illuminating LEDs, it brings a vibrant energy to any stage performance. The side panels, painted in a sleek black metal, amplify the overall aesthetics for a luxurious finish.

Exclusive hard case included

The opsix SE ships in a dedicated hard case, including space for cables and a sustain pedal. Your instrument can travel protected, whether you're carrying it to a rehearsal downtown or packing it up for a tour.

Get Illuminated with the Operator Mixer

At the heart of every sound is opsix SE's Operator Mixer - a simple set of six faders and knobs that invite exploration. Each part lights up red to indicate carriers or blue for modulators. Manipulating them opens up new sound-shaping possibilities to breathe fresh life into your musical ideas. This straightforward, hands-on workflow is part of what makes opsix SE so unique, just like the sounds it offers.

Direct Hands-On Control

Whether you're tweaking a preset or building a patch from the ground up, the six data entry knobs on the right give you quick access to the parameters you need and seamlessly sync with the large OLED display, giving you a clear, focused direction to your workflow. Coupled with the mixer, it makes creating fresh sounds super easy and, most importantly, fun!

Select from a full range of analogue-style filters, from the radical Korg MS-20 low-pass/high-pass filter to the powerful yet smooth KORG Polysix low-pass filter that gives your sound a vintage feel. There are also two or four-pole low-pass, high-pass, band-pass, and band-reject filters with resonance.

There's even a built-in spectrum analyser and oscilloscope that gives you visual feedback via the screen on the music you're making.

Six in One Synthesis

The core of opsix is nothing short of exponential. Since waveforms can be arranged and modulated in nearly infinite ways, opsix can easily do the sonic work that is similar to numerous types of synthesis:

Subtractive

Removing parts of the sound to get the sound you want; the most widely-used synthesis. opsix uses up to six envelopes and multi-modeled filters to achieve many cutting-edge and classical analog synthesis tones.


Semi-Modular
Rerouting signal paths to change the sound. A spin through the Alogorithm section will dramatically reshape the sound by changing how the signal routing between the operators work together, and no patch cables are needed.


Analog (Modelling)
Analog-style controls and plenty of stackable waveforms take you from digital to analogue-sounding in no time. Enjoy deep basses, crisp leads, thick pad sounds, fuzzy brass tones, and so much more.


Waveshaping

Adding intentional distortion to the waveforms to achieve aggressive overtones that are either harmonic or inharmonic. This will help you achieve gritty, bitey tones dripping with character.


Additive

Stacking waveforms and blending their harmonics is key to an expansive range of harmonious, dissonant, and tension-driven sounds. With six operators available, the complete FM experience is possible, including the ability to go back in time for classic sounds you have heard throughout recording history.


Classic FM

Last but certainly not least, opsix's highly flexible and powerful architecture starts with true six-Operator FM. As a result, it easily delivers signature sounds you have surely heard on thousands of hits from the '80s on through today, and with far more polyphony than other standalone FM synths available today.

With all of these ways to realize and explore sounds, opsix SE is uniquely suited as a "future-modern-classic" synth!

Altered Reality

opsix SE is FM-based, but the similarities to the classic synthesis end there. The Altered FM architecture delivers sounds across a vast spectrum, far wider than any single synthesis has been able to cover before, thanks to new sound components; new waveforms, filters, shaping, effects, LFOs, envelopes, modulations, and more, all translating to its broad assortment of sounds.

Powerful Effects Processing

opsix SE provides three blocks of 30 types of high-definition effects that you can use together to enhance your sounds even further. There's everything from a great mix of usable standard effects like chorus, phaser, delay, and compressor to some world-class shimmering reverbs that will elevate your sound to the next level.

Automatable 16-step sequencer

opsix SE features an incredible step sequencer that rivals groove boxes for flexibility and power. Press the PLAY button on any sound and experience the complexity of the sequences! Every Program has its unique sequence stored with it, or create your very own.

You can record up to six notes per step and edit each note's velocity, gate time, and playback timing. Create long phrases or make subtle shifts in timing to emulate strums or drum rolls, something that's not possible on a typical 16-step sequencer. The motion sequencer of the opsix SE also lets you record changes of up to six parameters, creating smooth motion changes in sound within a phrase or building rhythms that change dramatically with each step.

Notes: Keyboard version of Pittsburgh's superb Taiga synth, combining Moog-style East Coast elements with Buchla-inspired West Coast synthesis. Premium 37-key model with velocity, aftertouch and 24 HP expansion bay.

Supplier's Notes:
Modern Analogue Keyboard with Expansion Bay

Taiga Keyboard is an evolution of the award-winning Taiga synthesizer. Taiga gave users a boundary-smashing suite of unique modern Pittsburgh Modular analogue synthesizer innovations. Now in Taiga Keyboard, that same powerful suite of tools acts as a foundation in this expressive keyboard instrument.

Exploring the larger keyboard format, spreading controls out, and adding larger knobs makes sound sculpting while performing easier than ever. We've also added additional modulation sources, additional controls, a full-size 37 key premium aftertouch-enabled keybed, and a first-of-its-kind, modular expansion bay.

Taiga Keyboard oscillators

Waveforms generated by the three Taiga Keyboard oscillators stretch beyond the basic geometric shapes and sounds associated with analogue synthesis. Taiga Keyboard waveforms pass through up to three proprietary, cascading waveshapers designed to precisely manipulate their symmetry and harmonic content. In addition, each oscillator includes a robust six-stage wave folder to add even more complexity and depth to the diverse sonic palate of Taiga Keyboard. Dedicated coarse and fine controls deliver maximum flexibility & control over the full range of each oscillator.

The "Pittsburgh Filter"

The Pittsburgh filter has defined the sound of Pittsburgh Modular from the moment it was introduced. A signature gummy and relaxed sound with no dead spots that has been tweaked to perfection. It offers a warm, smooth sweep through the full frequency range and a sweet resonance that does not roll off the low end. This generation of the Pittsburgh filter is specifically designed to ensure a remarkable interplay with Taiga Keyboard's oscillators.

Pittsburgh Dynamics Controller

Pittsburgh's new Dynamics technology imparts Taiga Keyboard with a uniquely organic depth and presence. By simultaneously managing both amplitude and harmonic content, the Pittsburgh Dynamics Controller expands beyond the one-dimensional VCA found in other synthesizers. It does this by utilizing new advancements from traditional low pass gates to add additional definition and dimension to the voice of Taiga Keyboard.

When used in low pass gate mode, sounds shed harmonic content and become warmer as they decrease in volume. This mimics how sound waves react to their environment. Because of this connection, the Taiga Keyboard sounds more natural or complex compared to other instruments.

Analogue Echoes

Echos is a beautifully dark analogue delay tuned to enhance the source material by repeating it over and over. Echos utilizes a pair of bucket brigade delay chips to produce a classic voltage-controllable analogue delay effect that helps to place the sounds of Taiga Keyboard in a simulated environment.

Open Architecture

Taiga Keyboard has an internally defined signal path. Patch cables are not necessary to begin exploring. Attach a midi keyboard and plug the output into a speaker or DAW and Taiga Keyboard is ready to go with a robust but familiar workflow. When your ideas grow beyond the pre-defined signal path, a 64 point patch bay opens up a fully modular instrument with access to an even deeper set of features and tools.

Modular Expansion Bay

Staying true to our modular roots, we've added a 24hp powered eurorack Modular Expansion Bay that lets you personalize your Taiga Keyboard to your sound and performance needs. Simply remove the metal plate that covers the bay and add eurorack compatible modules. The modular bay helps you make Taiga Keyboard's sound completely your own.

Complete Set of Modular Tools

Taiga Keyboard includes a host of fully modular, analogue, and digital synthesis tools to support and enhance its core functionality. Analog tools include a flexible dual mixer, a pair of plucky four-stage envelope generators, noise, and sample and hold. Digital tools cover external MIDI, arpeggiator, clock sync'd modulation tools, and a robust collection of random generators. The Taiga Keyboard toolset is deep enough for any type of sonic exploration.

Keybed and additional MIDI control

Taiga Keyboard as its name would suggest, has an integrated 37 key keyboard with aftertouch, as well as pitch bend and modwheel. The keyboard can be used as a separate USB / Din MIDI controller using the Local On/Off modes.


Taiga Keyboard's key range can be easily changed using the dedicated octave up and down buttons that are located adjacent to the pitch bend and modwheel.

Taiga Keyboard features and other info:

Paraphonic synthesizer with unique additive elements
37 note aftertouch equipped keybed with full-sized keys
Fully patchable - use Taiga Keyboard's components as separate modules with external devices or reroute its internal patching.
24hp powered Eurorack Modular Expansion Bay
64 point patch bay for rerouting internal signal flow and integrating external sound and modulation sources
Controllable via MIDI, CV, and integrated pseudo random sequencing mode

Notes: Waldorf draw on their proud history with a new wavetable synth building on the classic Microwave 1 and modern Microwave II / XT. Serious synth power from this eight-voice monster.

Supplier's Notes:
M's musical heart is an eight-voice polyphonic, (16 voices for the M16) four-part multitimbral WAVETABLE SYNTHESIZER - as boldly blazoned in red across its full-metal blue- coloured casing, itself hinting at its illustrious Microwave heritage - are two wavetable oscillators with independent wavetable-generating Classic Microwave 1 and Modern Microwave II/XT modes, meaning that the wavetable oscillators behave differently in both of those modes (accessible by pressing the Mode button beside the helpful high-resolution graphic display with four endless encoders for yet more hands-on control).

With M, Waldorf are musically returning to their roots by bringing back classic Microwave and 'modern' Microwave II tone generation as a new-generation classic hybrid wavetable synthesizer with an analogue lowpass 24 dB/Oct VCF - SSI 2144 Improved Ladder Type - with resonance and analogue saturation feature, true stereo analogue VCA with panning option, and much more to explore in a desktop-friendly form factor featuring a wide range of unique sounds. M has a total of 16 banks with 128 memory slots each. The included sound presets - 1024 in total (divided into 8 banks of 128 sounds) - professionally programmed by world- renowned sound designers also include all of the classic Microwave sound sets, such as MW1 Factory Sound Set, MW1 Soundpool 1-5, the fat-sounding Analogue and Bassco, as well as PPG Wave 2.3 sounds cleverly converted for the original Microwave. Moreover, it also features freshly-programmed sounds utilising M's myriad new features - from true hard Sync (when working in its Modern Microwave II/XT mode) to the ARP (arpeggiator) and MIDI-syncable global LFO (Low Frequency Oscillator).


But beating at M's musical heart as an eight-voice polyphonic, four-part multitimbral WAVETABLE SYNTHESIZER - as boldly blazoned in red across its full-metal blue- coloured casing, itself hinting at its illustrious Microwave heritage - are two wavetable oscillators with independent wavetable-generating Classic Microwave 1 and Modern Microwave II/XT modes, meaning that the wavetable oscillators behave differently in both of those modes (accessible by pressing the Mode button beside the helpful high-resolution graphic display with four endless encoders for yet more hands-on control). Consequently, there is no hard Sync or ring modulation available in the Classic Microwave I mode, where 16-bit wavetables are bit-reduced to 8-bit and a 240 kHz non-anti-aliased sample rate is offered, whereas the Modern Microwave II/XT mode offers a 40 kHz sample rate with band-limited wavetables, although both oscillators - OSC 1 and OSC 2 - offer the same panel parameters.

Two LFOs are generating a periodic waveform with adjustable frequency Rate and Shape that can be used for modulation purposes, are also always at hand. However, unlike other Waldorf synthesizers, there is no classic modulation matrix in M. Making a conscious design decision to set up M's modulation facilities directly on the corresponding display page, to paying tribute to the 1989-vintage Microwave.

Back in the here and now, M takes performance to a whole new level, thanks to that advanced ARP with 16 preset patterns, chord mode, and an ability to synchronise to MIDI clock. Furthermore, four programmable ENVELOPES allow adventurous users to manipulate sound parameters via rate or timed modulations.

Musically making a connection to the outside world is important to any synthesizer, so M offers five (rear panel-positioned) stereo analogue outputs - arranged as MAIN OUT (L/Mono and R) and AUX OUT (A, B, C, and D), the latter of which can be used to route each of the four Multi (multitimbral) parts to different outputs, if desired; a stereo headphone output (with an associated Volume knob in addition to the topside Master Volume knob); 5-pin MIDI IN, OUT, and THRU DIN connectors, complimented by a USB 2.0 MIDI port (for computer connection to transmit and receive MIDI data); an SD Card slot (for updating M's firmware, importing/saving sound patches, and importing/saving M-specific data, such as user wavetables); and - last but not least - a Kensingtonr compatible security lock slot.

Specifications

Oscillators: 2 Wavetable oscillators with independent wavetables and two different tone generation models - Waldorf Microwave I model and Waldorf Microwave II model. 96 Factory Wavetables + 32 slots for User Wavetables
Filter: Analog low-pass 24 dB/Oct VCF (SSI 2144 Improved Ladder Type) with saturation and resonance
Amplifier: Analog true stereo VCA for each voice with panning option
Envelopes: 4 Envelope Generators; 8 point loopable time/level Wave envelope generator, VCF and VCA ADSR envelopes and a free assignable loopable 4 points time/level envelope
LFOs: 2 LFOs with different waveforms
Arpeggiator with 16 preset patterns, chord mode and the ability to synchronise to MIDI clock
Sound storage: 2048 Sound programs + 128 Multi programs
Polyphony: 8/16 voices

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Waldorf draw on their proud history with a new wavetable synth building on the classic Microwave 1 and modern Microwave II/XT. Serious synth power from this eight-voice monster.

Supplier's Notes:
M's musical heart is an eight-voice polyphonic, four-part multitimbral WAVETABLE SYNTHESIZER - as boldly blazoned in red across its full-metal blue- coloured casing, itself hinting at its illustrious Microwave heritage - are two wavetable oscillators with independent wavetable-generating Classic Microwave 1 and Modern Microwave II/XT modes, meaning that the wavetable oscillators behave differently in both of those modes (accessible by pressing the Mode button beside the helpful high-resolution graphic display with four endless encoders for yet more hands-on control).

With M, Waldorf are musically returning to their roots by bringing back classic Microwave and 'modern' Microwave II tone generation as a new-generation classic hybrid wavetable synthesizer with an analogue lowpass 24 dB/Oct VCF - SSI 2144 Improved Ladder Type - with resonance and analogue saturation feature, true stereo analogue VCA with panning option, and much more to explore in a desktop-friendly form factor featuring a wide range of unique sounds. Plentiful presets - totalling 2,048 sound programs (divided into 16 banks, each with 128 sounds) - professionally programmed by world- renowned sound designers also include all of the classic Microwave sound sets, such as MW1 Factory Sound Set, MW1 Soundpool 1-5, the fat-sounding Analogue and Bassco, as well as PPG Wave 2.3 sounds cleverly converted for the original Microwave. Moreover, it also features freshly-programmed sounds utilising M's myriad new features - from true hard Sync (when working in its Modern Microwave II/XT mode) to the ARP (arpeggiator) and MIDI-syncable global LFO (Low Frequency Oscillator).

But beating at M's musical heart as an eight-voice polyphonic, four-part multitimbral WAVETABLE SYNTHESIZER - as boldly blazoned in red across its full-metal blue- coloured casing, itself hinting at its illustrious Microwave heritage - are two wavetable oscillators with independent wavetable-generating Classic Microwave 1 and Modern Microwave II/XT modes, meaning that the wavetable oscillators behave differently in both of those modes (accessible by pressing the Mode button beside the helpful high-resolution graphic display with four endless encoders for yet more hands-on control). Consequently, there is no hard Sync or ring modulation available in the Classic Microwave I mode, where 16-bit wavetables are bit-reduced to 8-bit and a 240 kHz non-anti-aliased sample rate is offered, whereas the Modern Microwave II/XT mode offers a 40 kHz sample rate with band-limited wavetables, although both oscillators - OSC 1 and OSC 2 - offer the same panel parameters.

Two LFOs are generating a periodic waveform with adjustable frequency Rate and Shape that can be used for modulation purposes, are also always at hand. However, unlike other Waldorf synthesizers, there is no modulation matrix in M. Making a conscious design decision to set up M's modulation facilities directly on the corresponding display page, to paying tribute to the 1989-vintage Microwave.

Back in the here and now, M takes performance to a whole new level, thanks to that advanced ARP with 16 preset patterns, chord mode, and an ability to synchronise to MIDI clock. Furthermore, four programmable ENVELOPES allow adventurous users to manipulate sound parameters via rate or timed modulations.

Musically making a connection to the outside world is important to any synthesizer, so M offers six (rear panel-positioned) stereo analogue outputs - arranged as MAIN OUT (L/Mono and R) and AUX OUT (A, B, C, and D), the latter of which can be used to route each of the four Multi (multitimbral) parts to different outputs, if desired; a stereo headphone output (with an associated Volume knob in addition to the topside Master Volume knob); 5-pin MIDI IN, OUT, and THRU DIN connectors, complimented by a USB 2.0 MIDI port (for computer connection to transmit and receive MIDI data); an SD Card slot (for updating M's firmware, importing/saving sound patches, and importing/saving M-specific data, such as user wavetables); and - last but not least - a Kensington compatible security lock slot.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Explore unique sonic possibilities with this semi-modular digital synth, combining physical modelling with spectral sound sources, versatile effects and complex modulators.

Supplier's Notes:
An affordable hybrid monophonic synthesizer that allows you to create new sound universes inspired from the real world, where objects collide, vibrate, and resonate.

Anyma Phi blends the classic ingredients of electronic music with physical modelling technology, allowing it to simulate acoustic sound sources, such as strings or reeds, as well as resonating structures, like wood, glass, or metal.

Anyma Phi is compact enough to stand on your keyboard, or anywhere on your desk, and is compatible with any MIDI controller, such as keyboards, sequencers, or even wind controllers, including Aodyo's own Sylphyo.

Whether you play live or record in the studio, design sounds or play presets, Anyma Phi will become an indispensable tool. It can even be used as a stand-alone effects processor, or as part of a guitar effects pedal setup.

The heart of the Anyma Phi is the matrix, which provides a quick and easy way to explore your sounds by following a physical metaphor, with four macros for each of the five stages of sound generation:

With its matrix, Anyma Phi offers a straightforward way to tweak, explore, and create sound universes. It also provides easy ways to make your sound react to your MIDI controllers with mapping shortcuts. But don't be fooled by the simplicity!

If you want to dive deeper, you can take control of the powerful semi-modular synth engine beyond the matrix, with oscillators covering a wide range of synthesis techniques, effects, and modulators.

By connecting those together, you can create any kind of sound, and control it any way you want.

Anyma Phi offers you:
Up to 3 oscillators (sound sources)- physical models, classic spectral, noise souces, external input
Up to 5 effects: resonators, filers - EQ, pitch shifter, ring mod, delay - reverb, chorus - phaser, drive - folder
Up to 8 modulators: envelopes, LFOs, curves, slew limiter, math & logic

This amounts to 69 different module types available, including 30 sources, 22 effects, and 17 modulators.

Technical specifications:
Hybrid monophonic synthesizer
Stereo audio output:
Two 1/4" mono line jack outputs
One 1/4" stereo headphone jack output
1/4" stereo jack audio input (internal piezoelectric mic when external input unplugged)
MIDI inputs and outputs via USB and DIN ports
Powerful digital semi-modular synthesizer engine :
Memory: 200 patches
3 oscillator slot
5 effect slots along 2 serial buses (Main, Aux) + 1 mono reverb
16 modulator slots, including envelope generators, LFO, curves, interpolators, slew limiters, etc.
32 mapping slots (virtual patch cords), each allowing to control any synth parameter (including another mapping) using a modulator or a controller input, with a sidechain input
Responsive to pitch, pitch-bend, velocity, breath control / expression, as well as 4 other controller inputs

Additional features:
Percussive playing surface
Patch librarian / editor
Extended memory

The percussive playing surface will allow you to tap and scratch your sounds directly on the case, making your performance even more expressive and fun! This would be made possible by integrating a piezoelectric contact microphone into the case. The resulting sound would be available to use on the Anyma as an audio input, ready to be fed into resonators and effects!

You can edit patches directly on your Anyma, as well as send and receive patches via MIDI SysEx. But what about something more comfortable and powerful?

This software will allow you to easily manage and share patches, as well as edit them in depth in a streamlined environment on your PC or Mac, by making all the synth components directly visible and showing their interactions.

With more memory, you can have a huge library of sounds at your fingertips, or you can make many variations of your patches without having to worry about space or having the computer editor around to make backups!

Let's free the Anyma Phi from the shackles of the Western 12-tone equal temperament! A440 be gone!

Notes: Second-gen version of the excellent Opsix features major updates including 64-voice polyphony and an improved interface. Same powerful six-operator FM synth engine.

Supplier's Notes:
A Full-Spectrum Sound Experience

Opsix mk II is a digital synth like no other. Based on the sound engine of the original Opsix, the number of simultaneous voices and voicings has been expanded to an astounding 64 voices. The result is superior performance and precise control.

The Opsix Operator Mixer simplified FM synthesis for the first time, making it not just comprehensible but also controllable. With the addition of extra synthesis capabilities and programming, it offered a more efficient workflow and an even richer sound.

And, it is fully compatible with the sounds and samples from both the original opsix and the opsix Native software, including numerous high-quality libraries.

Evolved to an astounding 64 voices

The Opsix mk II has 64 voices, twice as many as the original 32 voices, allowing users to enjoy tone editing without having to worry about the number of simultaneous voices. In addition, the operator-mixer section, the most distinctive feature of this product, has been accented with a new image colour, green.

Get Illuminated with the Operator Mixer

At the heart of every sound is Opsix mk II's Operator Mixer - a simple set of six faders and knobs that invite exploration. Each part lights up red to indicate carriers or blue for modulators. Manipulating them opens up new sound-shaping possibilities to breathe fresh life into your musical ideas. This straightforward, hands-on workflow is part of what makes Opsix mk II so unique, just like the sounds it offers.

Direct Hands-On Control

Whether you're tweaking a preset or building a patch from the ground up, the six data entry knobs on the right give you quick access to the parameters you need and seamlessly sync with the large OLED display, giving you a clear, focused direction to your workflow. Coupled with the mixer, it makes creating fresh sounds super easy and, most importantly, fun!

Select from a full range of analogue-style filters, from the radical Korg MS-20 low-pass/high-pass filter to the powerful yet smooth KORG Polysix low-pass filter that gives your sound a vintage feel. There are also two or four-pole low-pass, high-pass, band-pass, and band-reject filters with resonance.

There's even a built-in spectrum analyser and oscilloscope that gives you visual feedback via the screen on the music you're making.

Six in One Synthesis

The core of Opsix mk II is nothing short of exponential. Since waveforms can be arranged and modulated in nearly infinite ways, Opsix mk II can easily do the sonic work that is similar to numerous types of synthesis:

Subtractive

Removing parts of the sound to get the sound you want; the most widely-used synthesis. Opsix mk II uses up to six envelopes and multi-modelled filters to achieve many cutting-edge and classical analogue synthesis tones.

Semi-Modular

Rerouting signal paths to change the sound. A spin through the Algorithm section will dramatically reshape the sound by changing how the signal routing between the operators work together, and no patch cables are needed. Analog-style controls and plenty of stackable waveforms take you from digital to analogue-sounding in no time. Enjoy deep basses, crisp leads, thick pad sounds, fuzzy brass tones, and so much more.

Analogue (Modeling)

Analogue-style controls and plenty of stackable waveforms take you from digital to analogue-sounding in no time. Enjoy deep basses, crisp leads, thick pad sounds, fuzzy brass tones, and so much more.

Waveshaping

Adding intentional distortion to the waveforms to achieve aggressive overtones that are either harmonic or inharmonic. This will help you achieve gritty, bitey tones dripping with character.

Additive

Stacking waveforms and blending their harmonics is key to an expansive range of harmonious, dissonant, and tension-driven sounds. With six operators available, the complete FM experience is possible, including the ability to go back in time for classic sounds you have heard throughout recording history.

Classic FM

Last but certainly not least, Opsix's highly flexible and powerful architecture starts with true six-Operator FM. As a result, it easily delivers signature sounds you have surely heard on thousands of hits from the '80s on through today, and with far more polyphony than other standalone FM synths available today.

With all of these ways to realize and explore sounds, Opsix mk II is uniquely suited as a "future-modern-classic" synth!

Altered Reality

What started as a legacy synthesis has evolved into something completely different. Opsix mk II is FM-based, but the similarities to the classic synthesis end there. The Altered FM architecture delivers sounds across a vast spectrum, far wider than any single synthesis has been able to cover before, thanks to new sound components; new waveforms, filters, shaping, effects, LFOs, envelopes, modulations, and more, all translating to its broad assortment of sounds.

Powerful Effects Processing

Opsix mk II provides three blocks of 30 types of high-definition effects that you can use together to enhance your sounds even further. There's everything from a great mix of usable standard effects like chorus, phaser, delay, and compressor to some world-class shimmering reverbs that will elevate your sound to the next level.

Specifications

Keyboard: 37 keys (velocity and release-velocity sensitive)
Sound generating system: Altered FM sound generator
Maximum Polyphony: 64 voices (varies depending on the setting)
Structure: 6 operators, 1 filter, 3 EGs, 3 LFOs, 3 effects, step sequencer, arpeggiator
Algorithm: 40 presets + user algorithm (unique to each program)
Operator: 6 modes (FM, Ring Mod., Filter, Filter FM, Wave Folder, Effect)
Oscillator waveform: 23 waveforms (Sine, Sine 12bit, Sine 8bit, Triangle, Saw, Saw HD, Square, Square HD, Additive Saw3, Additive Sqr3, Additive Tri3, Additive 12345, Additive 1+2, Additive 1+3, Additive 1+4, Additive 1+5, Additive 1+6, Additive 1+7, Additive 1+8, Noise S/H, Noise White, Noise Pink, Noise Blue)
Filter: 11 types (LPF 12, LPF 24, LPF MS-20, LPF POLY6, HPF 12, HPF 24, HPF MS-20, BPF 6, BPF 12, BRF 6, BRF 12)
EG: ADSR
LFO: 23 waveforms (Triangle, Saw Down, Saw Up, Square, Sine, Sample&Hold, Guitar, Exp. Triangle, Exp. Saw Down, Exp. Saw Up, Step4 Triangle, Step6 Triangle, Step4 Saw Down, Step6 Saw Down, StepRnd:Time, StepRnd:Lvl&Time, StepRnd:Level, Random:Time, Random:Lvl&Time, Triangle + , Saw Down + , Saw Up + , Square +)
V.Patch: 12 routings
Effect: 30 types (Chorus, Unison Ensemble, Phaser, Phaser (BPM) , Auto Pan, Auto Pan (BPM), Flanger, Flanger (BPM) , Rotary Speaker, Auto Wah, Exciter, Enhancer, LFO Filter, 3-Band EQ, Distortion, Guitar Amp, Decimator, Grain Shifter, Master Limiter, Compressor, Delay, Delay (BPM) , Autopan Dly, Autopan Dly (BPM), Tape Echo, Tape Echo (BPM) , Early Reflection, Reverb, Shimmer Reverb, Spring Reverb)
Sequencer: Step Sequencer (up to 16 steps, up to 6 notes per step), Motion Sequencer (up to 6 lanes)
Arpeggiator: 7 patterns (MANUAL, UP, DOWN, ALT1, ALT2, RANDOM, TRIGGER)
Number of programs: 500 (350 preset programs and 150 user programs as the factory-set default)
Favourite: 64 (16 Slots × 4 Banks)
Controllers: MODULATION wheel, PITCH wheel, RATIO OP 1-6 knobs, LEVEL OP 1-6 sliders, DATA ENTRY A-F knobs
Inputs/outputs: Headphone (6.3 mm stereo phone jack), OUTPUT L/MONO and R (impedance-balanced 6.3 mm TRS phone jacks), DAMPER (6.3 mm phone jack, half-damper not supported), MIDI IN and OUT connectors, USB B port
Power supply: AC adapter (DC12V)
Power consumption: 5 W
Dimensions (W × D × H): 565 × 338 × 90 mm / 22.24" × 13.31" × 3.54"
Weight: 2.9 kg / 6.93 lbs.
Included items: AC adapter
Accessories (sold separately): DS-1H damper pedal, PS-1 pedal switch, PS-3 pedal switch

Notes: Literally the size of a business card (if a little bit thicker), one of the smallest synths on the market. Simple design with a surprisingly punchy sound, plus CV and gate inputs for control.

Supplier's Notes:
The Business Card Synthesizer is a tiny synth that can be connected to a Business Card Sequencer, other synth gear, or played by itself.

Headphones can be connected directly to the output of the synth, and there are plenty of knobs to play with, so you can easily make noises anywhere. Great for learning about synthesizers!

S&H Button: Enables Sample & Hold, which disables the external CV IN jack and uses LFO1 and LFO2 to determine oscillator pitch. LFO1 sets the sample rate (SHAPE is ignored for this), and LFO2 is the wave that gets sampled.

GATE Button: Manually turns on the gate so sound comes out of the synth. This control is momentary, but you can latch it on by tapping the S&H button while holding the GATE button down.

COARSE TUNE: Adjusts the pitch of the oscillator up or down in large increments

FINE TUNE: Adjusts the pitch of the oscillator up or down in fine increments

SHAPE: Changes the shape of the wave produced by the main oscillator (VCO). Turning this control fully CW gives you a triangle wave. Start turning it CCW takes you through sawtooth/ramp, then at about the 12:00 position you get a square wave. Continue turning it CCW and you get several higher duty cycle square waves
.
GLIDE: Adjusts the rate at which the pitch of the VCO takes to go between pitches (whether changed by the COARSE TUNE knob or CV IN). Fully CCW causes the pitch to react almost instantly, while fully CW makes it take its sweet time.

LFO 1 / LFO 2 SHAPE: Changes the shape of the waves produced by the low-frequency oscillators (LFOs). The shapes are similar to those of the VCO, except that the LFOs have sawtooth/ramp waves that go both up and down (since you can actually hear the difference at LFO rates).

LFO 1 / LFO 2 RATE: Controls how fast the LFOs go.

LFO -> VCO: Routes the two LFOs to control the pitch of the main oscillator. The 12:00 position is basically "off", and the LFOs have no effect on pitch. Start turning the control CCW and LFO1 starts changing the pitch of the VCO. Maximum effect is at about 10:00. Continuing to turn the control starts to bring in LFO2 as well. All the way CCW gives you full effect from both LFO1 and LFO2.

Turning the control CW from 12:00 does essentially the same thing, but brings in LFO2 first, then LFO1.

This might seem like kind of a weird control, but it gives you quite a bit of routing flexibility with one knob. You can have no pitch modulation, LFO1, LFO2, LFO1 with a little LFO2, or LFO2 with a little LFO1.

LFO -> VCA: Routes the two LFOs to control the amplitude of the oscillator. (See LFO -> VCO control description above for more information about how the control works.)

ATTACK: Controls how fast the audio amplitude fades in when the gate is triggered. CCW is fast and CW is slow.

DECAY: Controls how fast the audio amplitude fades out when the gate is released. CCW is fast and CW is slow.

VOLUME: Controls the overall volume of the signal coming from AUDIO OUT.

FILTER: Changes the cutoff frequency of an analog low-pass filter. Turn the knob fully CW and all frequencies (that you can hear) are let through. Start turning it CCW and the high frequencies start getting cut off, until the sound becomes muddy / muffled. Use in conjunction with the SHAPE control to get the tonal quality you are looking for.

Connections:
CV IN: Accepts a 1 volt/octave control voltage to control the pitch of the oscillator. It responds from about 0-5V, but voltages outside of this range won't cause damage. The CV input is quantized, so only valid (western scale) notes are played. This input is ignored when Sample & Hold is enabled.
GATE IN: A voltage greater than about 2.5V will turn on the gate and allow audio to come out the output of the synth.
AUDIO OUT: Connect to an amplifier or another synth. The jack has both the tip and ring connected, so you can even use stereo headphones and hear sound from both ears.
Power: Connect 7.5-15VDC to this 3.5mm TS jack to power the synthesizer. The tip is positive (don't worry, there's a protection diode in case you get it reversed). You can get power from a 9V battery, AC adapter, or you may even be able to find an output on your modular synthesizer that can provide enough current.

Specifications:
Power supply: 7-15VDC (reverse-polarity protected!)
Power connection: 3.5mm phone jack, center-positive
Current draw: 15ma
Dimensions: 3.5" x 2" (the same as a business card!)

Notes: The ultimate real analog synth for everyone.

UNO Synth is the ultimate portable, monophonic, true analog synthesizer and IK Multimedia's entry in the hardware synthesiser world.

IK Multimedia combined two decades of experience in software and hardware development with the expertise of Italian boutique synth-maker Soundmachines and IK's synth guru, Erik Norlander (one of the brains behind acclaimed synths like the Alesis Andromeda). The result is a no-compromise instrument with massive analog sound that's also easy to use with hands-on programmability and advanced features at an unbeatable price.

The days of compromise are over. Now everyone can own a real analog synth with professional sound.

And UNO Synth is proudly made in IK's own Italian manufacturing facility to ensure the highest quality standards. Like the majority of IK hardware products, UNO Synth is built using a combination of IK's state-of-the-art, automated mounting machines and test systems and fine, renowned Italian craftsmanship.

Seasoned synth professionals and beginners alike will love UNO Synth's high-quality, pure analog audio path and its ultra-compact form factor. With both classic and modern synth sounds instantly at hand, UNO will put a smile on the face of synth fans of every musical genre. All this in a synth module that can be easily carried anywhere.

Electronic music lovers or first-time synth users will get instant satisfaction from this affordable, easy-to-use instrument even if they are new to analog synths or synth programming. Thanks to its onboard presets and easy-to-play keyboard with selectable scales and arpeggiator, UNO Synth is the perfect gateway into the synthesizer world.

The highly flexible synthesis engine not only excels in producing the rich, warm, punchy, deep bass sounds that are the core of a high-quality monophonic synth, it's also perfectly designed to bring a wide sonic palette of leads, drones, arps, sequences, sweeps and effects.

While UNO Synth is monophonic nature, its two independent oscillators can be tuned differently to also generate interesting pad-like interval sounds as well as octaves. Pulse width modulation of each oscillator provides the ability for a single oscillator to sound like two while the second oscillator can be tuned to an octave or interval for advanced modular-style timbres from the greatest classic synths.

Ease-of-use with powerful programming:

UNO Synth comes with 100 grab-and-go presets (80 fully rewritable), making it ready to play right out of the box. Each preset not only includes the sound programming, it also includes an associated arpeggio and sequence for even greater musical expression and portable sonic power.

This makes it easy for everyone to find the perfect sound, and beginners and professional producers alike will have great inspirational starting points to make working with the UNO Synth faster, more productive and more enjoyable.

Ultra-portable, battery-powered, to make music everywhere:

UNO Synth's ultra-compact dimensions make it among the smallest monophonic synth available. With its light weight (only 400g) and its battery-power supply (4xAA included) or USB power-supply (for battery power banks), UNO Synth gives musicians of all kinds the freedom to make music everywhere without being tied to a location! Fully untethered, it's the ideal analog synth to carry around all the time.

Use it standalone, live with your keyboard or with your DAW:

Electronic music lovers or DJs can make music with UNO Synth whenever and wherever the inspiration strikes. The built-in audio input also allows for daisy chaining other external audio device (like drum machines) so they can be used together with UNO Synth without the need for an additional mixer, keeping the set up at minimum for the greatest portability.

Notes: Sound:
- 4-operator FM Sound Engine offers dynamic and expressive additive synthesis

- A new feature of this engine is continuously variable feedback on every operator allowing for a wide-range of sound creation

- Two programmable effects blocks with seven effect types per block:
(The effect types are: VCM Touch Wah, VCM Flanger, VCM Phaser, Chorus, Delay, Reverb and Distortion)

- Multi-touch control interface gives direct access to four simultaneous parameters

- 32 Voice memory locations allow storing and recalling favorite Voices

Control:
- Based on the FS action found on the flagship Motif XF, HQ (High Quality) Mini Keys provide premium feel and response for fast, accurate and natural playing

- Sustain pedal input allows the sustain function for all FM generated sounds

Looper:
Integrated Phrase Looper: capture song ideas or just jam.

Mobility & Connectivity:
- Speakers

2W 3cm stereo speaker system lets you play any place, any time.

Specially designed bass reflex port technology enhances bass response for full, rich sound.

- USB

USB "TO HOST" allows MIDI connectivity to your USB-equipped computer or iOS device.

- Audio output

Dual 1/4"unbalanced line outputs provide connection to mixers, audio interfaces, DI boxes and more.

- Audio input

A 3.5mm aux line input lets you connect and hear mobile devices, tablets and more through the instrument.

- Controller

Continuous controller pedal input for volume control.

Battery powered:
Uses six "AA" batteries with five hours of life.

Create your Soundmondo. Inspire and be inspired:
Soundmondo is a free sound sharing community that lets you discover, create and share reface Voices and Set Lists using Google Chrome any place, any time you're online.

Powered by Web MIDI, Soundmondo is simple to use - just connect reface to Chrome and you're ready to create or start browsing.

Notes: Gorgeous experimental system based around Make Noise's brilliant Maths, Morphagene, QPAS and Mimeophon modules. Capture and process sounds in stereo and warp them into new dimensions.

Supplier's Notes:
The Tape & Microsound Music Machine music synthesizer is a small stereo system devoted to capturing external sounds and sculpting them into new ones. The Morphagene operates as a recorder that also allows the artist to mulch, layer and rearrange the sound and manipulate the speed and direction of playback. The Mimeophon repeats sounds and subjects them to further manipulation, and when combined with the Quad Peak Animation System (QPAS), incredible stereo sculpting of the spectrum. The Wogglebug and MATHS work to animate these effects, and the XOH provides a final stereo mix and line level or headphone outputs for monitoring and/or performance.

Notes: The Korg Monotron Duo is capable of creating even stranger, extreme and diverse sounds. The combination of 2 oscillators in unison provide thick, rich analogue tones, while tuning them to different intervals can create classic solo synth sounds and powerful effects. Korg have utilized their X-Mod (cross modulation taken from their classic Mono/Poly synths) circuitry in the Monontron Duo, enabling you to generate the mildest of sounds, to vibrant vibrato, to sharp, fm style abrasive synth sounds.

The Monotron Duo features Korg's fantastic enhanced ribbon controller keyboard and now features the same scale function as used on the Kaossilator, chromatic, major, minor or off scales are available, allowing your music juices to flow freely over any music. The distinctive tone of an analog filter (VCF) can dramatically alter and enrich the sound. The Monotron Duo uses the same highly acclaimed VCF circuit as Korg's classic MS-10 and MS-20 semi modular synthesizers. Originally released over 30 years ago, these instruments are still coveted today for their aggressive, dynamic filters. The VCF Cutoff knob sets the frequency or tone of the filter; the VCF Peak knob adds emphasis. A powerful filter is an essential aspect of any analog synthesizer, applying dramatic tonal changes to the sound, and projecting an intense personality that will stand out in any live performance.

The input jack (AUX input) built into the Monotron Duo's compact body allow you to place any audio source into the Monotron Duo's signal path, directly before the analog filter. This provides a great way to connect a Kaossilator, a guitar, or a digital audio player to the Monotron and enjoy tone-bending filter effects.

A miniature speaker is built into the Monotron Duo. Along with the battery operation and compact size, this feature allows you to enjoy the share the Monotron Duo's analog synthesis sound with your friends, anywhere, at any time. There's also a headphone output that you can use when practicing in private, creating sounds at home, recording, or for connecting to an amplifier or PA system.

http://www.youtube.com/watch?v=wWLOxRSll5Q

Notes: Arcade-themed synth from Teenage Engineering's amazing Pocket Operator range. Tiny portable synth with quirky chiptune-style sounds, built-in sequencer effects. Super fun.

Supplier's notes:
Arcade synthesizer and sequencer, with parameter locks, chord control and punch-in effects.

All pocket operator models perfectly complement each other. From drum machine, bass and lead synthesisers to noise percussion, the six unique units allow you to start a pocket band. Use them separately or connect them together, the choice is yours.

Use the built-in speaker for instant sound, connect a pair of headphones for detailed personal listening, or hook up a speaker system and the club will go boom!

Pocket operators are designed on a single multiple-layer circuit board using high quality components. They all share a compact and durable form factor.

By placing all vital and sensitive components under the LCD display there's no need for an outer case. By saving this cost, high quality components could be used to guarantee the best possible sound and very low power consumption. The space under the display also doubles as a speaker box.

Optional extras:
Add the silicone pro case to protect your pocket operator and get anti-slip feet, neck strap, battery protection and pro feel buttons. Use the SP-10 display protection to protect the LCD screen, and start a jam sync session with your friends using the MC-3 mini cables.

Notes: Legendary sound meets the generation of mobile musicians: With the reface Mobile Mini Keyboards, Yamaha introduces a small revolution. Based on legendary synthesizer models like the DX7 or CS series, the company presents four compact instruments, which play to their strengths on the road, on stage or even in the studio. reface is perfect for songwriters, sound designers, live performers and those looking for access to an instrument which allows them to react when inspiration strikes. The online collaboration with musicians around the globe via Yamaha's 'Soundmondo' sound community and the easy connection to notebook, Apple iPhone and iPad are making the four models ideal for being creative together. Battery power and integrated stereo-speakers make the reface quartet ready to play at all times.

From Pink Floyd to Michael Jackson to U2 - with over 40 years in synthesizer history, Yamaha influenced Rock and Pop music like no other instrument manufacturer. Legendary models and series like the CS Control Synthesizer or the DX7 are an inherent part of music history. Time for a small revolution: With the reface Mobile Mini Keyboards, Yamaha presents a range of ultra-mobile synthesizers and a stage-piano that impress with their compact design and web-based sound-exchange. They build the bridge between the sound tradition of the legendary prime fathers and the cooperative music production over the internet.

It started as a sketch of a young Yamaha design team: Under the concept name "reimagined interfaces of classic Yamaha keyboards" the group presented a series of four compact instruments, in which every single one celebrates the personality of a legendary Yamaha instrument - but with a character of its own reimagined for today's 'on-the-go life style'. The concept also integrates a web-based sound exchange between musicians and allows a cooperative sound design. With the introduction of reface, this vision becomes reality.

At home, in a studio, in a park or on a train - the compact design and the powerful integrated stereo speakers allow inspiration in seconds - without any equipment to set up. Creativity can be realised anywhere: Thanks to the battery power, all reface Mobile Mini Keyboards are ready at any time - even when there is no power socket nearby. The setup is done in seconds, even the connection to notebook, iPhone or iPad for the recording and saving of sounds.

All four reface models are presenting themselves as a creative toy for sound design. But despite their compact design, they are professional instruments that are inviting to play. All models feature Yamaha's brand new 'HQ' Mini-Action keyboard with 37 keys (3 octaves). The user interfaces were designed separately for each instrument introducing features such as drawbars for the reface YC organ and the capacitive Multi-Touch surface on the reface DX.

reface YC: Electric Combo Organ - Rich, punchy sounds are its area of expertise: The reface YC offers additive synthesis paired with a unique power of expression using nine drawbars and virtual rotary speakers. The instrument combines five different models of organs, the sound is created using a special "Organ Flutes Tone Generator". In addition to the possibility to carry around five organs in a single piece of hardware without breaking your back, the reface YC delivers the authentic spirit of playing an organ using the smallest user interface possible.

All four reface models offer a rich potential for creative sound design - and the opportunity to get in touch with the whole world: With Soundmondo, Yamaha created an online hub connecting the reface community all over the globe. Soundmondo offers creative possibilities to create, share and discover sounds. The connection is established intuitively using a special Web MIDI technology for Google Chrome. As soon as a reface model is plugged in, it offers the possibility of direct synchronisation. Voices and set lists can be stored in a private area as well as shared with the community.

Quick and easy storage as well as management of sounds with iPhone and iPad: The free reface iOS app for Apple mobile devices makes data transfer extremely simple. A name, a picture and multiple tags can be applied to stored voices; they can be sorted in different ways as well. Search functionality is also included. Using a set list, voices can be arranged in a specific order and recalled one after the other. Another impressive feature is the possibility to exchange voices using QR codes: A distinctive code can be generated from any stored voice and can then be shared using the different options available with iOS. It can for example be sent via email or read using the camera of another iPad to import it into the app.

Notes: An absolute powerhouse of a synth with 16-voice polyphony, stereo architecture and a four-part multitimbral digital sound engine. Built-in sequencers, sample playback and effects make it a true all-rounder.

Supplier's Notes:
MD900 is a polyphonic desktop synthesizer, multitimbral with 4 parts. A polyphony of up to 16 voices are shared by the 4 multi-timbral parts. All of these 4 parts have their own effect stack [Mod-Delay (flanger, chorus, vibrato), Reverb, Tube-AMP, EQ, LP-Filter, DYNAMIC (Limiter) , Stereo Delay ...].

The overall audio path is stereo. Rationally, the oscillator, mixer filter, amps and effects are all in stereo.

Four independent arpeggiator und step sequenzer assigned to each of the four synth parts. The trigger sequencer may trigger the built in transient sample player (Drum Kit .wav) or send triggers to MIDI-Out (USB-DIN or USB-MIDI)

The housing is made of aluminum with real walnut wood on the front and back.

All components are industrial grade. On the operator panel we use precision potentiometer with aluminum covered knobs.

For some parameter entries we use endless encoder without rest.

This kind of encoders feels like a potentiometer.

All of this feels very valuable and it feels great to work with.

The MD900 XVA engine is patch compatible with the M800-R2 synthesizer.

Overview Firmware OS:

The XVA-Sound Engine of the MD900 runs on top of a Linux OS with real time extensions. The overall boot time is < 30 sec.

All contents like Wavetable-, Sample-files, preset and sub-preset files are stored on the internal filesystem.

The filesystem is accessible over ethernet (USB-Lan Adapter).

Managing presets, samples, wavetables configurations & updates are possible and easy to handle.

Operation Panel:

The operation panel gives you real time control to the major voice parameters with a dedicated knob. All parameters are accessible via touch-display and the endless rotary encoders. The part (timbre) has to be selected to alter the parameter on the dependent timbre.

The module specific info display gives the necessary detailed feedback on the parameter changes.

Specifications

Dimensions: 460mm x 295mm x 65mm
Power: External 15V DC power brick 50W
Audio In : 6.3mm stereo jack
Audio Out: Left 6.3mm mono jack, right/left 6.3mm stereo jack
Headphone: 6.3mm stereo jack
MIDI DIN: 1x Midi Input, 1x Midi Output, 1x Midi through
USB 2.0: 2x Hot connect for USB/Ethernet, USB-Midi Host
Pedal SW: 1x Pedal switch input 6.3mm jack
Volume pedal: 1x Standard expression pedal
TFT Display: 5" 800x 480 Colour (24bit) capacitive touch display.
Frontpanel: 37x Potentiometer, 12x linear slider, 12x endless encoder, 30x switches, 42x Leds

Notes: Inspired by the early 80s Synton Syrinx, the SER-2020 is a semi-modular monster, featuring an excellent formant filter section, unique Touch 'N Bend Control and MPE-compatible MIDI interface.

Supplier's Notes:
The SER-2020 is a monophonic semi-modular analog synthesizer with an formant filter section, designed to use as standalone synthesizer or in combination with Eurorack modules. Inspired by the Synton Syrinx *(1) added the flexibility of an MS-20. Its filter design features a combination of a 24dB/octave VC Low Pass Filter, and two independent Resonant VC Peak Filters for precise and dynamic sound shaping. The sound is ranging from solid bass sounds to articulated formant effects. Other features on the SER-2020 are the Touch 'N Bend Control together with the MPE (MIDI Polyphonic Expression) capabilities makes the SER-2020 a special instrument which response to its player. The flexible routing makes the SER-2020 a versatile machine for sound effects.

Key Specifications:
2 VCO's (CEM3340 based)
1 Sub-Oscillator
Ring Modulator
Noise Generator
Audio Mixer
Multi-Mode Sync & Sync D-Tune
3 VCF's (CEM3350 based)
2 ADSR's
2 LFO's with Reset & Shaper Modes
Auto-Glide
Multiple Triggering
Touch 'N Bend Pad
Bend Assign
Sample and Hold
Semi Modular Setup - CV inputs and outputs
Signal and Headphone output.
MIDI interface
USB MIDI interface
MPE compatible - Sensitive for; Strike (note-on velocity), Press (aftertouch), Glide (pitch bend), Slide (brightness) and Lift (note-of velocity).

The SER-2020 consist of two VCO's and one sub-oscillator, driven by VCO 1. Both VCO's deliver a triangle, sawtooth, square wave and pulse signal, which can be selected. A rich spectrum can be obtained with Pulse Width Modulation of VCO 1 and VCO 2. The LFO 1 and 2 signals can be feed to the pulse width modulation section introducing phase shift effects and Doppler frequency shifts. Since the both VCO's have a separate LFO for PWM, chorus-like effects can be obtained by controlling both pulses with different LFO speeds. VCO 2 can be synchronized to VCO 1 in different modes. Synchronization is applied when two or more VCO's have to produce exactly the same pitches, without phase shift or beat effects. When VCO 2 is detuned from VCO 1 another effect occurs, which will result in quite dramatic tone colors.
Each VCO has an individual output, also the noise generator and sub-oscillator has individual outputs.

The most important sections of this synthesizer is the filter. The SER-2020 features a very extensive filtering system, which consists of the standard 24 dB/octave low pass filter and two independent band pass filters, which together form the Voltage Controlled Formant filter.
Both band pass filters have a frequency control and a resonance control for setting the selective amplification in the pass band. The bandpass filters are equipped with a control voltage mixer for LFO, ADSR and key range voltages. The LFO control can be used for the external modulation input.
The low pass filter is an standard 24 dB/octave roll-off. It has a frequency control and a modulated CV mixer from several sources like LFO, ADSR and the key range. The LFO control can be used for the external modulation input. Also the resonance of the low pass filter can be controlled.

The SER-2020 has two ADSR generators, of which one is used to control the internal VCA, and the other one to control the filter section. The control signal can be inverted by means of the ADSR controls in the filter section, so that the filters can be swept in opposite directions.
ADSR 1 and 2 have a positive and negative (inverted) direct output available on the patch panel.

The SER-2020 has two independent Low Frequency Oscillators (LFO's) of which the rate can be controlled, and for LFO 2 also the wave shape.

LFO 1 generates a triangle wave which exclusively is routed to the pulse width modulation control input of VCO2. LFO 1 also generates a square wave and a pulse wave. The square wave is available as direct output on the patch panel. The pulse wave of LFO 1 is internally routed to the sample and hold generator as clock source.

LFO 2 is more versatile and can be used for the modulation of the VCO's and the filters. Moreover LFO 2 can be used as a one shot generator which means that a signal is generated much alike an Attack/Release generated function. Except for the LFO 2 rate control with the preset knob, it also can be controlled dynamically with the pad.

Several sections in the synthesizer can be controlled with the bend pad, by pressing it with the left hand index and middle finger. The pressure sensitivity for the VCO, VCF and VCA can be adjusted. The touch 'N bend pad also reacts on the MIDI modulation control and the MIDI brightness (CC#74) control for MPE compatibility.
Also the speed of the rise/decay mode of the LFO 2 is possible. Pressing the UP pad will result in a shorter cycle, and pressing the DN pad in a longer cycle.

Notes: Heavily redesigned for version three, Twisted Electrons offer up a new take on their compact acid synth: dual oscillators, new digital filter, real-time effects and more. Great value.

Supplier's Notes:
acid8 is an 8Bit bass-line synthesizer with a revisited sound and interface.

MKIII has been rethought from the ground up. The filter has been replaced with an new all digital one, the handling has been redesigned for more immediate handling and many other real time features have been added including transposition automation, filter wobbler, stutter and vinyl spin-down effects.

The synth engine now has dual oscillators allowing fat and harmonized sounds.

acid8 MKIII offers the same features as its slimsynth uAcid8 counterpart, but with the addition of hardware MIDI and analog sync in and out connectivity and packed in a rugged metal case.

A vst plugin is available to easily take control of the synth's parameters.

FREQUENTLY ASKED QUESTIONS:

Q:How do I copy/paste a pattern?

A:Hold SLIDE and press OCT- to copy and OCT+ to paste

Q:The briefly LEDS go out when I stop the sequencer - is something wrong?

A:This is normal and occurs when the memory is updated (a few seconds after the sequencer is stopped when a change has been made).

Notes: Strictly limited-edition full-scale reissue of an underrated analogue classic from 1973. The miniKORG 700FS is a classy monophonic instrument with aftertouch and spring reverb.

Supplier's Notes:
Back To The Future: a limited edition authentic revival of the miniKORG 700.

The miniKORG 700 was KORG's first mass-produced monophonic synthesizer released in 1973 at a time when the form of synthesizers as musical instruments had not been fully established. After a lot of experimentation, the miniKORG 700 arrived bringing the world of synthesizers to a wide group of users by offering simple operations that could producing extreme changes in sound, and was championed by a strong base of admiring musicians.

The miniKORG 700FS is an authentic revival of the miniKORG 700S, (an improved version of the miniKORG 700) that was released the following year. The revised miniKORG 700FS offers added functionality such as an arpeggiator, spring reverb and aftertouch. The miniKORG 700FS is a fully-realized analog synthesizer that was developed in conjunction with the original designer, Fumio Mieda.

(Note: To avoid confusion in the following text, both the original miniKORG 700 and the miniKORG 700S are listed as "miniKORG 700" for the most part.)

Why revive the miniKORG 700 now?

The real beauty and awesomeness of the sounds produced by the miniKORG 700 could not be realized through analog modeling technology that uses computational integrated circuitry such as DSPs and other devices to model analog circuitry. And although KORG continues to produce analog synthesizers such as the prologue, the minilogue and many others, we recognize that these instruments owe their existence to the miniKORG 700.

While theoretical know how is important when designing analog circuitry, deep experience is also required to understand what the results will actually be once the circuitry is completed. Ten years have passed since the monotron, a next-generation analog product from 2010 was developed by young KORG engineers and analog enthusiasts. It took some time for the full vision of these engineers to be explored and delivered but at last we've finally arrived - at the start.

KORG's wish is for customers to experience the beauty and awesomeness of the authentic analog sound through the miniKORG 700FS designed by the KORG analog engineers under the supervision of Fumio Mieda, who designed the original circuitry, ensuring that the elements that go beyond the circuit schematics would be faithfully represented.

While the miniKORG 700 was KORG's first synthesizer, it also produced some of the fattest and most dense sounds of all of our synthesizers. The miniKORG 700FS, features oscillators with a penetrating sound and an authentic recreation of the Traveler controller, one of the key features of the miniKORG 700.

The volca keys and volca bass use the filter circuit from the miniKORG 700, because the clear and penetrating characteristics of this filter were a perfect match for products that specialize in lead and bass synth sounds with a strong presence. The miniKORG 700 sound sits easily in today's music, particularly with its lead and bass synth sounds.

The miniKORG 700 came about as a sub keyboard that players would set atop their organs (frequently used in the 1970s) to augment the organ's sound palette. Nowadays, the beautiful lead synth sound of the miniKORG 700FS works well with stage keyboards such as or electric pianos, organs and so on.

The controls on the miniKORG 700 were laid out below its keys in a row, so that players who set the instrument on top of their organ would find them easy to access. Even today, this layout is intuitive and easy to understand, with a unique look that no other instrument offers.

When the miniKORG 700 was originally released, electronic components were larger in size, limiting its functionality due to the small space inside. Thanks to changes in technology, there's now have more space to add a spring reverb effect as well as a joystick for pitch bend and modulation. The new version also features aftertouch for added expressiveness, as well as important features an arpeggiator, USB port, MIDI IN connector and a CV/GATE IN jack.

Dimensions (W x D x H): 744 x 280 x 122 mm/29.29" x 11.02" x 4.80"
Weight: 8.5 kg/18.74 lbs.
Power supply: AC adapter (DC 12V)
Power consumption: 9W

Notes: Wave Expander bridges the gap between the Melody Miracle and Touch Tones synthesizers, and the rest of the synthesizer world. Control other synths by sending CV and gate signals via Wave Expander, and dial in the right amount of control with onboard CV tuners. Outputs are visually indicated with the Chrominancer color window at the center of Wave Expander, bringing cosmic insight to the signals at hand.

Melody Oracle and Touch Tones expander module
Use AMP synthesizers to control external gear
12 outputs (6 CV/6 Gate)
CV Range: 0V to +12V
Chrominancer color window

Notes: ***B-STOCK: Box damaged, but product is in excellent condition and in perfect working order***


Inspired by the legendary Roland TB-303, the B1 is a bargain-priced analogue acid and bass synth, featuring a built-in sequencer plus saturation and delay effects to bring your sound to life. Incredible value.

Supplier's Notes:
Donner B1 Analogue Bass Synthesizer & Sequencer with VCF, Saturation and Delay Effects

In order to provide better use experience, Donner B1 analog bass synthesizer has made unprecedented innovation in the operation interface, provide simpler and more intuitive interface for all music lovers. And this innovation won the 2022 reddot design award.

Beginner-Friendly Synthesizer Interface

Donner have optimized the sequencer of this synthesizer to be easier and more intuitive to use. Easily edit your own sequences with 128 sequence presets covering a range of musical styles, and 128 user programmable presets.

Silicone Tactile Keyboard with Backlight

The Donner B1 sequencer features modern silicone keys with a color changing backlight, making them a joy to play. In addition to sequencing, you can also play your synth lines live with the keys.

Classic Deep Bass Tone With Saturation and Delay Effects

The B1 allows you to dial in classic deep bass tones such as, distortion and tape delay. It will give you the taste of being one of the famous EDMs, Hip-Hop DJs or producers.

Flexible and Versatile Music Studio at Your Fingertips

The B1 controller connects to your DAW via USB-MIDI for use as a MIDI keyboard, and the MIDI IN/OUT interface connects the B1 to your external MIDI devices for sequencing or as a MIDI controller.Connect external sound sources using the 1/8" audio input. The 1/4" TS mono Main Out carries the main output signal. The 1/8" headphone jack is perfect for monitoring your sound. The B1's audio I/O options have you covered.

The B1 controller & sequencer features all of the deep bass and acid synthesizer sounds of the classic synth, but brings it back in a more intuitive format. Our B-1 bass synth gives you the perfect combination of retro and new school cool.

Specifications

Number of Voices: Monophonic
Type: Analog
VCF: 1 low pass
Oscillators: 1
Size: 54×323×130mm - 0.62kg (1.37 lbs)
Control Knobs: SATURATION knob, DRIVE knob, TONE knob, DELAY knob, LEVEL knob, TIME knob, FEEDBACK knob
Control Buttons: UP and DOWN, TRANSPOSE, PATTERN, TEMPO/TAP, PLAY/STOP, CLEAR, WRITE, BAR, SIGNATURE, DOTTED
Power Input: DC input connector
Power Adaptor: 9VDC 500mA inner positive
MIDI IN/OUT: MIDI In & MIDI Out, 5-pin IN
USB (MIDI): USB 2.0, Type C
Outputs: Line output: 1/4' TRS
Headphones: 3.5mm TRS
Supported Operating Systems: Win 7 or higher / Mac OS X 10.6.8 or higher
Inputs & Outputs (TS 3.5mm): AUX in: maximum input +5 dBu, Sync in: More than 2.5V
Number of Voices: Monophonic
Type: Analogue
VCF: 1 low pass
Oscillators: 1
Size: 54×323×130mm 0.62kg (1.37 lbs)
Control Knobs: SATURATION knob, DRIVE knob, TONE knob, DELAY knob, LEVEL knob, TIME knob, FEEDBACK knob
Control Buttons: UP and DOWN, TRANSPOSE, PATTERN, TEMPO/TAP, PLAY/STOP, CLEAR, WRITE, BAR, SIGNATURE, DOTTED
Power Input: DC input connector
Power Adaptor 9VDC 500mA inner positive
MIDI IN/OUT: MIDI In & MIDI Out, 5-pin IN
USB (MIDI): USB 2.0, Type C
Outputs: Line output: 1/4' TRS
Headphones: 3.5mm TRS
Supported Operating Systems: Win 7 or higher / Mac OS X 10.6.8 or higher
Inputs & Outputs (TS 3.5mm): 3.5mm TRS

Notes: Based on the legendary Roland Jupiter-8, the ISE-NIN is a synth with the attention to detail we've come to expect from Black Corporation. Eight voices, fully analogue, with MPE support. Beautiful.

Supplier's Notes:
ISE-NIN (pronounced ee-seh-nin) features eight voices, each consisting of 100% analogue voltage controlled oscillators, analogue lowpass and highpass filter, noise generator, two ADSR envelopes and a VCA. 2 different presets can be layered, making richer sounds, but limiting voices amount to 4 per layer. Each layer has its own fully assignable velocity and poly-aftertouch controls and global MPE settings.

Furthermore the synth offers full MIDI/USB control and the ability to store 128 presets per bank across 10 banks. Sophisticated microtuning with a support of ODDSound MTS-ESP and a signature arpeggiator integrates this classic synth concept seamlessly into the future of your modern studio needs.

Design: 19" / 4U
Polyphony: 8
Sound Generation: Analogue
MIDI interface: 1x In, 1x Out/Thru
Storage Medium: Internal
USB-port: Yes
Effects: No
Arpeggiator: Yes
Number of Analogue Outputs: 2
Digital Output: No
Display: Yes

Notes: Great value from this curious little semi-modular FM synth. Two carriers, two modulators and virtual analogue delay give you plenty of creative power. Ideal for drones, weirdo synth parts and special FX.

Supplier's Notes:
The Mystic is an experimental FM synth with 2 carrier frequencies, 2 modulators, and an analogue-style delay. All of the synth parameters are controllable via cv as well as time control in the delay section.

The Mystic generates colossal waves that swirl, echo, ascend, and plunge into an ever-changing, sonic playground. Transcend reality and let the mystic guide the way!

Powering Tip

The Mystic uses a 9VDC, negative-tip, 200ma power supply. It is a standard Boss-style power supply used for most effects pedals. The power supply is sold separately.

Once plugged in, the Mystic is powered up and ready to go. Simply unplug it from the wall when not in use.

Output: line level

A note about the output level

The Mystic runs at line level, to be used with pedals and other devices that also run at line level. If using with Eurorack, the output level needs to be converted, just as you would with any guitar pedal.

There are several Eurorack modules that do this, but the one Recovery use and recommend is the Strymon AA.1.

Output jack

The Mystic requires a 3.5mm cable to connect the audio output to other devices.

Latching switch

Use this to latch the sound on and off. Up is on, and down is off.

Controls

Carrier frequency controls

Each carrier works together to build a waveform. Usually it's CF2 that responds to pitch tracking, but that can vary depending on the setting. Think of CF1 and CF2 as 2 sign waves being folded in various ways. Sending independent CV into each one will not get traditional 1 v/oct pitch results, but a combination of pitch, texture and tone.

Modulator controls

These are used to shape the tone and texture of the folded waveform you've created with CF1 and CF2. Modulation rate will control the speed of the modulation texture.


Momentary button

Use this to momentarily turn sound on and off. The momentary Button only functions when the Latching Switch is in the off (down) position.

Latching switch

Use this to latch the sound on and off. Up is on, and down is off.

Delay time controls

Controls the delay / echo time.

Delay feedback

Controls the number of delay / echo repeats.

Delay mix

Controls the volume of the delay / echo signal.

Volume

Controls the overall output volume of the Mystic.

CV controls

These will accept CV voltage of up to +5 volts. The parameter you are controlling should be at 12 0'clock to get the most effect from the voltage input.

Notes: Limited-edition murdered-out Noir version of Arturia's mega PolyBrute, with expressive multi-axis Morphee controller and Morph knob to blend between patches.

*** Firmware update September 2023 ***

Arturia's PolyBrute goes deeper with firmware 3.0:

Explore new heights of Polyphonic sound with an array of embellishments, experimental features, and creative upgrades for PolyBrute:
New effects distortions
Effects Routing
New Tuning Options
New Layer Modes
Dive to new depths of coloration and customization with a free update that brings features, fixes, and fresh sounds to PolyBrute:

7 Distortion modes:

Add crunch, saturation, and pure sonic carnage with 7 modes of Distortion, accompanying PolyBrute's Modulation, Delay, Reverb, and EQ effects.

Flexible effects routing

Rewire PolyBrute's effects and signal chain to suit your sound design flow; both the Insert and Send modes can now be adjusted in terms of order.

Enhanced tuning:

Adjust PolyBrute's musical role in your projects with deeper individual oscillator tuning, transposing the keyboard by semitones, and more.

New Stereo Layer mode:

Allocate one voice to the left channel and one to the right to add increased natural width to PolyBrute's sounds.

Over 350 new presets:

A total rework of PolyBrute's library means hundreds of new presets, further exploring expressivity, analogue power, and new features like Distortion.

PolyBrute Connect:

Enjoy quicker, smoother communication between PolyBrute and its software counterpart, also accommodating other new features from firmware 3.0.

Workflow & expression improvements:

Reload your last saved preset on startup, send program changes, adjust LED brightness, and more.

Supplier's Notes:
PolyBrute Noir is a 61-note polyphonic analogue keyboard, uniting unparalleled expressivity and sound design flexibility with 6 fearsome Brute voices, complete with a limited-edition stealthy black finish. The result is an instrument that lets musicians perform fearlessly, compose with fluidity, and explore sound in perpetual motion.

Limited Noir Edition

A true dark horse in any setup, PolyBrute Noir stylishly conceals its enormous creative potential within a slick black exterior, complete with colorful accents, luxurious dark wooden appointments, and signature ionized parts that'll make anyone look twice.

Massive analogue polyphony

Harness the raw power of analogue with 6 powerful analogue Brute voices, comprising seamless waveshaping VCOS, dual filters, and a tactile array of modulation. Split, layer, and stack PolyBrute's voices for every flavor of analogue polyphony - from beauty to beast.

Morphing: sounds within sounds

Explore sound between the lines with 2 distinct sonic states within each preset, yours to seamlessly morph and navigate between. With a single sweep of the multi-axis Morphee controller and Morph knob, discover endless sweet spots in every patch.

Perform, express

Freely express your musical style and bring your creative ideas to life with PolyBrute's hands-on controls, flexible interface, and premium velocity-sensitive keybed with aftertouch. From the Morphee to the responsive ribbon controller, every aspect of PolyBrute ensures that your sound is an extension of yourself.

Your sound to infinity

Built to satisfy your inner sound explorer, this polysynth comes fully equipped for perpetual patch discovery and sound design. Quickly create modulation connections with the Matrix, color your patch with 3 digital stereo FX engines, and instantly animate any idea with musical sequencing and effortless arpeggiation.

Included Software:

PolyBrute Connect

Arturia MIDI Control Center

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Tracing the footsteps of its bigger brother, Iridium features all the synthesis elements of Quantum as well in a rack-compatible format. The combination of the powerful engine, incredible flexibility and detailed sound shaping facilities creates sheer endless possibilities of sound. Yet, the comprehensive layout and easy-to-understand structure lets you design your own sounds in no time. Sporting a solid metal casing and the same high level of craftsmanship like Quantum, Iridium is now ready to take over studios and stages throughout the world.

Contributing another entry in Waldorf's rich history, Iridium joins the family as a direct descendant of the PPG Wave. Though, Iridium offers much more than its ancestor. Five different synthesis models are provided by Iridium for each of the three oscillators:

Wavetable
Waveform (Virtual Analog)
Particle (Sampling and Granular Sampling)
Resonator
Kernels

Kernel mode has been introduced with the OS 2.0 of Quantum. This huge upgrade allows one oscillator to be turned into up to six sub oscillators. These can be interlinked through FM at audio rate and arranged in user-definable constellations. Just this upgrade alone would have provided enough additional features to create a synthesizer on its own. Now, all those functions have been integrated into Iridium as well.

Up to 7000 patches can be saved in Iridium. Patches from Quantum can be loaded in Iridium and vice-versa.

Iridium features three digital filters per voice. Two in the Dual Filter section and another one in the Digital Former. Several types are available to choose from:

12 or 24dB and Lowpass/Highpass/Bandpass with optional saturation or dirtiness.
Various filter models are available including those from Waldorf Nave, Largo and PPG 3V.
The Dual Filter section can be controlled independently or together in several different link modes.
The Digital Former offers all the filter types and models from the Dual Filter plus unusual models like Comb, Drive, Bitcrusher and more in addition.

All filters retain a true stereo signal throughout the entire structure of the instrument.

Up and down, back and forth
6 Envelopes, 6 LFOs and many more are just waiting for being used as sources in the 40 slots of the Modulation Matrix. Each slot has one additional control amount. Modulations can be directed to almost every numerical value in Iridium. All sources and destinations can be used as many times as desired until the Modulation Matrix is full. If you ever happen to run out of LFOs or Envelopes, you can use the Komplex Modulator for generating a custom shape LFO or Envelope.

Even though Iridium features a staggering amount of parameters to control, everything is organized in a logic structure which is easy to master. The major controls have their own dedicated knob, while the rest is accessible through the touch screen and the encoders around. There are no long menus keeping you from doing what you had planned. Instead, you will find a workflow which you will soon miss on other synthesizers.

Embedded in the front panel, a 4x4 silicon pad matrix invites you to launch notes, chords, arpeggios and sequences with up to 32 steps for notes and multiple parameter lines. Direct access to the parameters is granted by the seven encoders to the left and the right hand side of the touch screen.

Iridium's large color touch screen keeps you informed at all times. Upon moving a knob, Iridium gives you an optical feedback of your changes in real-time. Filter curves move, Particle grain sizes change, Envelopes warp and much more:

Komplex Modulator curves can be drawn with your finger
Envelopes show at which point the voices currently are
Wavetables are displayed in comprehensive view modes
VU meters show which voices are used and the individual voice levels
Different Analyzers show the audio signal at different points

Two Audio Outputs allow you to listen to Iridium, while two Inputs allow Iridium to process external signals. 4 CV inputs plus Gate In and Trigger In are ready to forward external signals to the Mod Matrix. Furthermore, Clock In and Clock Out will get your gear in sync. MIDI connections can be made through USB and DIN MIDI. Iridium is also equipped with a USB Host port for MIDI devices. This port also handles data exchange, in addition to the MicroSD card slot.

Once again, Waldorf have underlined their status with a new and exciting synthesizer.

Notes: Unique digital instrument based on bitmask synthesis and resonant filters. Raw and distinctive tones, with notes interacting in unorthodox ways.

Supplier's Notes:
Expressive & Characterful

The Kodamo MASK1 is a musical instrument focused on the interaction between the player and the keyboard. With its exclusive Bitmask engine combined with resonant filters, the MASK1 makes raw, gritty and ethereal sounds that respond in incredible ways to your playing style.

It's not just the notes

Most synths just play the notes you press. Kodamo went a bit further, by looking at how the notes interact with each other. Only by playing the keyboard, you can control when the attacks are triggered, how notes are tied or separated from each other, or if they should keep resonating or stop each other like if they were played on the same string on a stringed instrument. You will discover new ways of playing the keyboard.

Built with love

The MASK1 uses a high quality, 5-octave Fatar keyboard with velocity and aftertouch. It's fully made of painted metal, with two ALPS knobs and 23 KAILH mechanical switches. Everything is assembled in France with high attention to detail. A lot of time was spent on selecting parts and suppliers to balance price and work ethics, while always aiming for the highest quality.

For live and studio players

With its compact size and light weight, the MASK1 will easily fit in your studio and is ideal for gigs. It remembers settings between sessions. With its unique sound, premium keyboard and MIDI connectivity, it can become the main keyboard of your setup.

Explore the sounds

The MASK1 invites you into a zen and relaxed sound exploration. Press a button, turn the knob and listen how the sound changes. The MASK1 is designed to have very few parameters, but well-thought ones. The Bitmask synthesis engine makes rich and warm sounds ranging from classic analogue tones to voice-like formants, glitchy 8-bit noises and ethereal pads. Sounds are fully editable and can be stored in one of the 400 user memory slots. They can be transferred to your computer and shared with other people.

What is Bitmask synthesis?

Bitmask synthesis is the method the MASK1 uses to generate its sound. Internally, oscillators do only have one waveform. Various tones are created by applying what is called a bitmask. This is a technique inherited from computing, which alters a number by masking some of its digits. Here, this technique was adapted to make sound. Bit-masking creates complex wave shapes that are full of harmonics and give the MASK1 its sonic character.

Specifications

Synthesis type: Bitmask, subtractive
Polyphony: 10 voices with optimized allocation
Multitimbrality: 4 parts (5 in layered/split mode)
Oscillators: 2 bitmask per voice with 256 masks each, transpose and detune
Noise: 1 per voice with programmable sample-and-hold frequency
Filter: 1 per voice, two poles (12dB/oct) state variable, self-resonant with pitch tracking and 4 modes (low, high, band pass, notch)
Envelopes: 4 loopable ADSR per voice (osc1, osc2, noise, filter), 3 delta-decay (osc1 mask, osc2 mask, pitch)
LFO: 2 per part with 7 waveforms and noise, delay, decay and 16 destinations
Arpeggiator: 26 patterns with adaptive or fixed chords, latchable, retrig or pitch change modes. Arp do send note events to MIDI out.
Looper: Up to 10000 events, unlimited duration, single track. Records notes, pitch bend, mod wheel, aftertouch and sustain pedal.
Effects: Two stereo effects in series. First effect: chorus, phaser, distortion, bitcrusher, tremolo and ring mod (64 types). Second effect: delay, comb filter, reverb, room simulations and distortion (48 types)
Modulations: Velocity (6 destinations), modulation wheel (16 destinations), aftertouch (16 destinations), LFO1 and LFO2 (16 destinations each)
Play modes: Polyphonic, monophonic, slurred, mono portamento on legato, paraphonic, hybrid poly-mono on legato, slurred paraphonic, mono retrigger, poly retrigger
Split: Configurable split point, balance between voices, transpose, panning and tuning
Layer: Configurable balance between voices, transpose, panning and tuning
Misc: Voice pan spread, polyphonic portamento, keyboard envelope rate scaling
Memory: 120 factory presets, 400 user voices. EEPROM-based (no battery required)
Audio outputs: 2 balanced 1/4" TRS jack, pro audio level with +/-12V internal power supply, 1/4" jack headphones
MIDI: 2 DIN (in, out), class-compliant USB type B, SysEx voice transmit/receive, CC-mapped voice parameters
Keyboard: 61 full-size keys, weighted Fatar action with 6 velocity curves and 6 aftertouch curves
Controls: 23 buttons, 2 rotary encoders, pitch bend wheel, modulation wheel
Display: 4-digit red display
Pedal input: Sustain, 1/4" TS jack, adaptive polarity
Tuning: 400-470Hz. 6 temperaments including arabic tuning.
Size: 89 x 26 x 8cm including knobs and feet.
Weight: 7.5kg
Power: External 12V DC adapter, AC 100-240V in
Chassis: Powder-coated, screenprinted steel. Light grey (RAL 9002) colour
Sides: Black ABS

Notes: One of the most unusual synths around, based on a rotating optical disc which functions as a sequencer. Program the built-in pulsewave synth engine or control other synths using the optional Wave Expander.

Supplier's Notes:
Taking its cosmic inspiration from star charts and ancient astrolabes, Star Song is a rotating optical disc-programmed sequencer with a built-in minimalist synthesizer.

Star Song can be used either to play its own built-in pulsewave synthesizer, or in combination with the A.M.P. electronics Wave Expander (sold separately) to drive external analogue and modular synthesizers.

How it is used

To create sequences on Star Song, the seven translucent rings (orbits) of the optical disc are marked with a marker (included) or opaque tape. The disc is removable and additional discs are sold separately, allowing for indefinite storage of your favourite sequences.

The outer six rings control the tuned note selection and note-on/off sequencing. The innermost ring controls the cut-off frequency for the built-in bandpass filter.

Disc on/off and disc direction are toggled from touch contacts on the front panel, and disc speed is controlled from the central rotary control.

Additionally, there are 1/8" inputs to control rotation speed and rotation direction with an external source.

The addition of Wave Expander makes the Star Song into an incredibly versatile Gate(6 channels) and CV (1 channel) sequencer, as well as providing the Star Song's tuned audio oscillator over five separate octave divisions (four audio and one sub-audio), 12 outputs in all to integrate into your modular system.

Multiple Star Song units can be synced by using an external clock signal, and you can even slave Star Song to your existing Melody Oracle/Wave Expander combo.

Sing the cycles of the spheres, with Star Song, a "revolutionary" new sequencer.

Tech Specs:

Disc Rotation: 0~15RPM
Panel Controls: Disc rotation on/off, disc rotation rate, disc rotation reverse.
Synthesizer: Quasi-monophonic pulsewave, 8 tuned notes, each with three octaves used in any combination. Sequenced via optical disc.
Tone Filter: Bandpass, optically-controlled.
Audio Output: 1/4" LINE (5V p-p)
AMP LINK Output: CAT 5 or 6 w/SHIELDED connector (compatible with Wave Expander and future AMP accessories only).
Motor Clock Input: 1/8" 0-12V. ON @>7.5V
Disc Direction Input: 1/8" 0-12V. CCW @>7.5V
DC input: 15VDC, 2.1mm, tip positive (US adapter included)

Notes: Top-of-the-range take on the powerful Wavestate synth concept, based on wave sequencing with 120-note stereo polyphony, natural-touch 61-note keybed and aftertouch.

Supplier's Notes:
Wavestate SE is the powerful evolution of Korg's legendary Wavestation, taking Wave Sequencing to a new level. Designed in California and built in Japan, Wavestate SE includes a premium 61-note keyboard with aftertouch, in an all-metal chassis.

Built for a new era of musicians, composers, and producers, Wavestate SE features hundreds of dynamic sounds, extensive hands-on control and 120 notes of stereo polyphony to inspire new levels of creativity.

A sonic evolution

Wavestate SE is the powerful evolution of Korg's legendary Wavestation, taking Wave Sequencing to a new level. Designed in California and built in Japan, Wavestate SE includes a premium 61-note keyboard with aftertouch, in an all-metal chassis. Built for a new era of musicians, composers, and producers, Wavestate SE features hundreds of dynamic sounds, extensive hands-on control and 120 notes (stereo) of polyphony to inspire new levels of creativity.

Premium, expressive touch

Featuring a 61-key natural-touch keyboard, Wavestate SE feels incredible to play. The inclusion of aftertouch gives fingertip control of the unique constantly changing sound. All factory presets have been meticulously programmed to take full advantage of this expressive control.

Beauty meets brawn

Wavestate SE's all-metal design is as hard-wearing as it is beautiful - with a matte-black aluminium panel complimented perfectly by glossblack stainless-steel sides. The premium finish continues to the controls themselves, where metal-plated knobs are perfectly weighted and add a luxurious touch.

Easily expressive. Exceptionally deep.

The Wavestate SE puts filters, envelopes, LFOs, effects and more at your fingertips with dedicated front-panel controls. Eight programmable Mod knobs are customised to bring out the most in every sound, for real-time performance and also when saving results as new patches. Pitch bend and modulation wheels, and the unique Vector Joystick, give you instant access to multiple dimensions of real-time expression. Digging deeper, almost all front-panel knobs, and most on-screen parameters, can be modulated. You can even modulate settings for individual Wave Sequence steps! Mod Processors let you transform modulation signals using quantization, smoothing, curvature, and more.

Gigabytes of samples

Totalling in the gigabytes, Wavestate SE's sample library is vast. At a thousand times larger than that of the original Wavestation, the amount of great-sounding raw material for Wave Sequences is astounding.

Three of the key sound designers from the original Wavestation, John Bowen, John "Skippy" Lehmkuhl (Plugin Guru), and Peter "Ski" Schwartz, joined Belgian artist Airwave and the renowned Korg voicing team to create the incredible Wavestate SE sound library.

Powerful effects

An arsenal of superb effects ensures Wavestate SE delivers production-ready sounds. Each performance has a master reverb and parametric EQ while each layer has three dedicated effects. Alongside compressors, EQs, choruses, flangers, phasers, and stereo delays, you'll find distinctive processors such as the Wave Shaper, Talking Modulator, Reverse Delay, Multiband Mod Delay, and Overb, plus modelled effects including Vox guitar amps and wah pedal, multi-head tape echo, and a collection of other classic guitar pedals.

Multiply by four

Take all that power, and quadruple it! You can layer up to four Programs together in a Performance-each with their own effects and arpeggiator. The Vector Envelope and Joystick mix the individual voices of the four layers, and can also modulate any other parameters. This sheer sonic power is further enhanced with 120 notes (stereo) of polyphony. Set Lists offer effortless organisation of your Performances, and deliver instant access at the gig or in rehearsal. And thanks to Smooth Sound Transitions, previously-played voices and effects continue to ring out naturally, even when a new sound has been selected.

Deep connectivity

Connect to recording or monitoring systems with balanced stereo outputs, and a stereo headphone output is provided for private playing or onstage cueing. Din-style MIDI jacks ensure connection to other MIDI-equipped instruments and audio gear. The Wavestate SE supports class-compliant USB MIDI connections to Windows and Mac computers, and the Wavestate SE Editor/Librarian and Sample Builder programs are available as free downloads from Korg.

Wave Sequencing 2.0

The original Wavestation gave each step of a wave sequence a duration, a sample and a pitch. This created ear-catching repetitive patterns, giving rise to entirely new approaches to sound design. But what if the sounds could evolve in organic and unexpected ways, instead of just repeating? Wave Sequencing 2.0 separates the timing, the sequence of samples, and the melody, so that each can be manipulated independently. It also adds new characteristics, including shapes, gate times, and step sequencer values. Each of these is a "Lane", and each Lane can have a different number of steps, start, end and loop points. Every time the sequence moves forward, the individual Lanes combine to create the output. For instance, a sample may be matched with a different duration, pitch, shape, gate length, and step sequence value every time that it plays. You can modulate each Lane's start, end, and loop points separately for every note, using velocity, LFOs, envelopes, Mod Knobs, or other controllers. Each note in a chord can be playing something different! Lanes can also randomise the step order every time they play, with real-time control over the range of included steps, and individual steps can be randomly skipped (with a modulatable probability from 0 to 100%). The result is organic, ever-changing sounds that respond to your control. The four onboard arpeggiators can interact with Wave Sequences for even more possibilities.

Ultimate protection

Whether travelling to a studio or setting out on a world tour, ensure your Wavestate SE arrives safely with the included hard case. The custom design even provides space for cables and pedals.

Specifications

Keyboard: 61 keys (Natural touch keyboard with velocity and release-velocity
sensitive, aftertouch)
Sound generation: Wave Sequencing 2.0
Polyphony: 120 stereo voices
Sounds: 261 Performances, 799 Programs, and 1,042 Wave Sequences. Storage for tens of thousands of user Performances
Performance: 4 Layers, Reverb, EQ; all edits are stored in the Performance, DAW-style (saving as separate Programs, Wave Sequences etc. is supported but not required)
Layer: Program, Arpeggiator, Key and Velocity Zones
Program: Wave Sequence, Filter, Amp, Pre FX, Mod FX, Delay
Filters: 2-pole LPF, 2-pole HPF, 2-pole BPF, 2-pole Band Reject, 4-pole LPF, 4-pole HPF, 4-pole BPF, 4-pole Band Reject, Multi Filter, MS-20 LPF, MS-20 HPF, Polysix
Controllers: Mod Wheel, Pitch Wheel, Vector Joystick X/Y, 8x
Program/Performance Mod Knobs

Inputs/outputs: Headphone (6.3 mm stereo phone jack) OUTPUT L/MONO and R (impedance balanced 6.3 mm TRS phone jacks)
DAMPER (6.3 mm phone jack)
MIDI IN and OUT connectors
USB B port

Power supply: AC adapter (DC12V, 2500mA)
Consumption: 5W
Dimensions: 1,014 x 344 x 108 mm
Weight: 8.6 kg

Included items

AC adapter, hard case

Notes: The premium version of Korg's excellent Wavestate gets the Platinum look in this limited-edition model. 61-note keyboard, metal chassis and limited-edition Platinum finish.

Supplier's Notes:
Wavestate SE Platinum

The ultimate Wavestate, the limited edition Wavestate SE Platinum features a stunning premium silver aluminium panel and stainless steel side panels.

Wavestate SE is the powerful evolution of Korg's legendary Wavestation, taking Wave Sequencing to a new level. Designed in California and built in Japan, Wavestate SE includes a premium 61-note keyboard with aftertouch, in an all-metal chassis.

Built for a new era of musicians, composers, and producers, Wavestate SE features hundreds of dynamic sounds, extensive hands-on control and 120 notes of stereo polyphony to inspire new levels of creativity.

A sonic evolution

Wavestate SE is the powerful evolution of Korg's legendary Wavestation, taking Wave Sequencing to a new level. Designed in California and built in Japan, Wavestate SE includes a premium 61-note keyboard with aftertouch, in an all-metal chassis. Built for a new era of musicians, composers, and producers, Wavestate SE features hundreds of dynamic sounds, extensive hands-on control and 120 notes (stereo) of polyphony to inspire new levels of creativity.

Premium, expressive touch

Featuring a 61-key natural-touch keyboard, Wavestate SE feels incredible to play. The inclusion of aftertouch gives fingertip control of the unique constantly changing sound. All factory presets have been meticulously programmed to take full advantage of this expressive control.

Beauty meets brawn

Wavestate SE's all-metal design is as hard-wearing as it is beautiful - with a matte-black aluminium panel complimented perfectly by glossblack stainless-steel sides. The premium finish continues to the controls themselves, where metal-plated knobs are perfectly weighted and add a luxurious touch.

Easily expressive. Exceptionally deep.

The Wavestate SE puts filters, envelopes, LFOs, effects and more at your fingertips with dedicated front-panel controls. Eight programmable Mod knobs are customised to bring out the most in every sound, for real-time performance and also when saving results as new patches. Pitch bend and modulation wheels, and the unique Vector Joystick, give you instant access to multiple dimensions of real-time expression. Digging deeper, almost all front-panel knobs, and most on-screen parameters, can be modulated. You can even modulate settings for individual Wave Sequence steps! Mod Processors let you transform modulation signals using quantization, smoothing, curvature, and more.

Gigabytes of samples

Totalling in the gigabytes, Wavestate SE's sample library is vast. At a thousand times larger than that of the original Wavestation, the amount of great-sounding raw material for Wave Sequences is astounding.

Three of the key sound designers from the original Wavestation, John Bowen, John "Skippy" Lehmkuhl (Plugin Guru), and Peter "Ski" Schwartz, joined Belgian artist Airwave and the renowned Korg voicing team to create the incredible Wavestate SE sound library.

Powerful effects

An arsenal of superb effects ensures Wavestate SE delivers production-ready sounds. Each performance has a master reverb and parametric EQ while each layer has three dedicated effects. Alongside compressors, EQs, choruses, flangers, phasers, and stereo delays, you'll find distinctive processors such as the Wave Shaper, Talking Modulator, Reverse Delay, Multiband Mod Delay, and Overb, plus modelled effects including Vox guitar amps and wah pedal, multi-head tape echo, and a collection of other classic guitar pedals.

Multiply by four

Take all that power, and quadruple it! You can layer up to four Programs together in a Performance-each with their own effects and arpeggiator. The Vector Envelope and Joystick mix the individual voices of the four layers, and can also modulate any other parameters. This sheer sonic power is further enhanced with 120 notes (stereo) of polyphony. Set Lists offer effortless organisation of your Performances, and deliver instant access at the gig or in rehearsal. And thanks to Smooth Sound Transitions, previously-played voices and effects continue to ring out naturally, even when a new sound has been selected.

Deep connectivity

Connect to recording or monitoring systems with balanced stereo outputs, and a stereo headphone output is provided for private playing or onstage cueing. Din-style MIDI jacks ensure connection to other MIDI-equipped instruments and audio gear. The Wavestate SE supports class-compliant USB MIDI connections to Windows and Mac computers, and the Wavestate SE Editor/Librarian and Sample Builder programs are available as free downloads from Korg.

Wave Sequencing 2.0

The original Wavestation gave each step of a wave sequence a duration, a sample and a pitch. This created ear-catching repetitive patterns, giving rise to entirely new approaches to sound design. But what if the sounds could evolve in organic and unexpected ways, instead of just repeating? Wave Sequencing 2.0 separates the timing, the sequence of samples, and the melody, so that each can be manipulated independently. It also adds new characteristics, including shapes, gate times, and step sequencer values. Each of these is a "Lane", and each Lane can have a different number of steps, start, end and loop points. Every time the sequence moves forward, the individual Lanes combine to create the output. For instance, a sample may be matched with a different duration, pitch, shape, gate length, and step sequence value every time that it plays. You can modulate each Lane's start, end, and loop points separately for every note, using velocity, LFOs, envelopes, Mod Knobs, or other controllers. Each note in a chord can be playing something different! Lanes can also randomise the step order every time they play, with real-time control over the range of included steps, and individual steps can be randomly skipped (with a modulatable probability from 0 to 100%). The result is organic, ever-changing sounds that respond to your control. The four onboard arpeggiators can interact with Wave Sequences for even more possibilities.

Specifications

Keyboard: 61 keys (Natural touch keyboard with velocity and release-velocity
sensitive, aftertouch)
Sound generation: Wave Sequencing 2.0
Polyphony: 120 stereo voices
Sounds: 261 Performances, 799 Programs, and 1,042 Wave Sequences. Storage for tens of thousands of user Performances
Performance: 4 Layers, Reverb, EQ; all edits are stored in the Performance, DAW-style (saving as separate Programs, Wave Sequences etc. is supported but not required)
Layer: Program, Arpeggiator, Key and Velocity Zones
Program: Wave Sequence, Filter, Amp, Pre FX, Mod FX, Delay
Filters: 2-pole LPF, 2-pole HPF, 2-pole BPF, 2-pole Band Reject, 4-pole LPF, 4-pole HPF, 4-pole BPF, 4-pole Band Reject, Multi Filter, MS-20 LPF, MS-20 HPF, Polysix
Controllers: Mod Wheel, Pitch Wheel, Vector Joystick X/Y, 8x
Program/Performance Mod Knobs

Inputs/outputs: Headphone (6.3 mm stereo phone jack) OUTPUT L/MONO and R (impedance balanced 6.3 mm TRS phone jacks)
DAMPER (6.3 mm phone jack)
MIDI IN and OUT connectors
USB B port

Power supply: AC adapter (DC12V, 2500mA)
Consumption: 5W
Dimensions: 1,014 x 344 x 108 mm
Weight: 8.6 kg

Included items

AC adapter, hard case, t-shirt, stickers

Notes: Part of Sonicware's excellent Liven groovebox series, the XFM is a modern take on classic digital FM sounds, offering a choice of intuitive and quick sounds or logical and deep programming.

Supplier's Notes:
Classic FM sounds, effortlessly merged with FM FUSION.

Using the 4-track sequencer and presets, you can construct an entire song.

Three Fusion FM Engines X-LAB Engine
Merge two FM sounds with a single knob to create a completely new sound.

XFORM Engine
Transform one FM sound into another over a specific period of time.

X-LFO Engine
Continuously transform between two FM sounds using an LFO.

Over 300 Inspiring Preset Sounds
Ready-to-use presets including, leads, keyboards, strings, winds, basses, pads, chords, drums, and sound effects.

Two approaches to FM sound design

Intuitive and Quick
Merge and sculpt FM sounds with a single, intuitive, knob turn.

The X-Lab engine merges two FM sounds by smoothly blending their envelopes, modulation routing, and feedback. The X-Lab algorithm can merge sounds with radically different FM structures and overtones, all without losing the fundamental tuning of the sound. Pitch locking can also be turned off to create brilliant atonal transitions between FM sounds.

Merged sound can then be saved, recalled, and merged with additional FM sounds. This is called merging process FUSION FM.

Logical and Deep

For those who want to dive into the FM Engine, the EDIT mode and included overlay provide full access to the innovative 4-OP XFM engine.

15 knobs and 30 buttons provide quick and intuitive access to all FM parameters.

Explore FM synthesis without the conventional menu diving and head scratching.

4-Track Step Sequencer

Perfect for song production and live performance

Manage lead, bass, rhythm, and more, each on separate tracks.

Sequence up to 64 steps per pattern.

Save up to 128 patterns.

The parameter locking function allows you to record knob changes into your patterns. This automation function can be recorded live, or programmed in step by step.

Sub-divide the tempo down to 32nd notes for higher resolution sequencing.

Sequence longer notes across several steps, AKA Tied Notes.

Specifications:

Size
297mm (W) x 176mm (D) x 48mm (H)
11.7 in (W) x 6.92 in (D) x 1.89 in (H)

Weight:
790g/1.74lb.

Keyboard:
27 keys (with a hold function)

Knob:
15 physical control knobs
Optional LATCH function prevents jumps in value when knob position and parameter values do not match. LCD dot indicates when a parameter value matches the saved value, or when the value has been changed.
One physical encoder

Audio output:
Stereo line out (stereo 3.5mm mini jack)
Headphone out (stereo 3.5mm mini jack)
Compatible with Teenage Engineering Pocket Operator2 Series SYNC OUT
Speaker

Audio in:
LINE IN (stereo 3.5mm mini-jack)
Compatible with Teenage Engineering Pocket Operator 2 Series SYNC IN

Interfaces:
MIDI IN connector (5-Pin DIN type)
MIDI OUT connector (5-Pin DIN type)
SYNC IN jack (monaural 3.5mm mini jack)
SYNC OUT jack (monaural 3.5mm mini jack)

Power supply:
9V DC output AC adapter
Current: 1A or greater
Plug Type: EIAJ3 Standard
Inner Diameter: 1.7mm
Outer Diameter: 4.75mm,
Polarity: Center +
Compatible with power supplies designed for the Korg Volca 1 .
6 AA batteries

Synth Engine:
Four FM synth engines, X-LAB, XFORM, X-LFO, and LIBRARY

Voice mode:
6-note polyphonic mode
Mono mode
Legato mode with adjustable glide time
Arpeggiator modes (Up, Down, UpDown, DownUp, Up&Down, Down&Up, Up+1, Up+2, Down-1, Down-
2, Random, Play Order)

Sweep:
Sweep with adjustable speed, range, and curve

Filter
Low Pass
High Pass
Band Pass
Each track has its own filter envelope.

Effects:
Chorus
Flanger
Send Delay
Insert Delay
Bit Crusher
Reverb
Distortion
Low Pass
High Pass
Isolator

LFO:
Each track has one LFO which can affect both pitch and filter cutoff.
Adjustable LFO Shapes.
Adjustable start time delay for each LFO.

Sound memory:
512 FM sound memory slots (16 x 32 banks)

Sequencer:
4 tracks
Up to 64 steps per pattern
128 patterns
Step length can be set from 1/1 to 1/32
Enter longer notes (Tie)
Track level and pan can be set independently
FX send amount can be set independently for each track
Pattern BPM / Global BPM can be set
Step copy and paste function
Track copy and paste function
Transpose function
Real-time recording
Directly enter notes for each step when sequencer is on or off
Parameter lock function
Random playback function (Playback step size can be set)
Stutter function
Note Trigger probability can be set between 25% and 100%
Pattern chain function
Metronome and pre-count function
Swing function

MIDI:
Notes, control changes, clock input/output
IMPORT/EXPORT of user data
Firmware update via Sysex

Accessories:
FM sound editing overlay
Warranty

The AC adapter is not included.
Please use 9V DC output AC adapter (1A or higher, EIAJ3 standard inner diameter 1.7mm outer diameter 4.75mm, center +).
Compatible with power supplies designed for the Korg Volca 1.

Notes: ***B-STOCK: Box damaged, product in perfect working order***


Second-gen version of the excellent Opsix features major updates including 64-voice polyphony and an improved interface. Same powerful six-operator FM synth engine.

Supplier's Notes:
A Full-Spectrum Sound Experience

Opsix mk II is a digital synth like no other. Based on the sound engine of the original Opsix, the number of simultaneous voices and voicings has been expanded to an astounding 64 voices. The result is superior performance and precise control.

The Opsix Operator Mixer simplified FM synthesis for the first time, making it not just comprehensible but also controllable. With the addition of extra synthesis capabilities and programming, it offered a more efficient workflow and an even richer sound.

And, it is fully compatible with the sounds and samples from both the original opsix and the opsix Native software, including numerous high-quality libraries.

Evolved to an astounding 64 voices

The Opsix mk II has 64 voices, twice as many as the original 32 voices, allowing users to enjoy tone editing without having to worry about the number of simultaneous voices. In addition, the operator-mixer section, the most distinctive feature of this product, has been accented with a new image colour, green.

Get Illuminated with the Operator Mixer

At the heart of every sound is Opsix mk II's Operator Mixer - a simple set of six faders and knobs that invite exploration. Each part lights up red to indicate carriers or blue for modulators. Manipulating them opens up new sound-shaping possibilities to breathe fresh life into your musical ideas. This straightforward, hands-on workflow is part of what makes Opsix mk II so unique, just like the sounds it offers.

Direct Hands-On Control

Whether you're tweaking a preset or building a patch from the ground up, the six data entry knobs on the right give you quick access to the parameters you need and seamlessly sync with the large OLED display, giving you a clear, focused direction to your workflow. Coupled with the mixer, it makes creating fresh sounds super easy and, most importantly, fun!

Select from a full range of analogue-style filters, from the radical Korg MS-20 low-pass/high-pass filter to the powerful yet smooth KORG Polysix low-pass filter that gives your sound a vintage feel. There are also two or four-pole low-pass, high-pass, band-pass, and band-reject filters with resonance.

There's even a built-in spectrum analyser and oscilloscope that gives you visual feedback via the screen on the music you're making.

Six in One Synthesis

The core of Opsix mk II is nothing short of exponential. Since waveforms can be arranged and modulated in nearly infinite ways, Opsix mk II can easily do the sonic work that is similar to numerous types of synthesis:

Subtractive

Removing parts of the sound to get the sound you want; the most widely-used synthesis. Opsix mk II uses up to six envelopes and multi-modelled filters to achieve many cutting-edge and classical analogue synthesis tones.

Semi-Modular

Rerouting signal paths to change the sound. A spin through the Algorithm section will dramatically reshape the sound by changing how the signal routing between the operators work together, and no patch cables are needed. Analog-style controls and plenty of stackable waveforms take you from digital to analogue-sounding in no time. Enjoy deep basses, crisp leads, thick pad sounds, fuzzy brass tones, and so much more.

Analogue (Modeling)

Analogue-style controls and plenty of stackable waveforms take you from digital to analogue-sounding in no time. Enjoy deep basses, crisp leads, thick pad sounds, fuzzy brass tones, and so much more.

Waveshaping

Adding intentional distortion to the waveforms to achieve aggressive overtones that are either harmonic or inharmonic. This will help you achieve gritty, bitey tones dripping with character.

Additive

Stacking waveforms and blending their harmonics is key to an expansive range of harmonious, dissonant, and tension-driven sounds. With six operators available, the complete FM experience is possible, including the ability to go back in time for classic sounds you have heard throughout recording history.

Classic FM

Last but certainly not least, Opsix's highly flexible and powerful architecture starts with true six-Operator FM. As a result, it easily delivers signature sounds you have surely heard on thousands of hits from the '80s on through today, and with far more polyphony than other standalone FM synths available today.

With all of these ways to realize and explore sounds, Opsix mk II is uniquely suited as a "future-modern-classic" synth!

Altered Reality

What started as a legacy synthesis has evolved into something completely different. Opsix mk II is FM-based, but the similarities to the classic synthesis end there. The Altered FM architecture delivers sounds across a vast spectrum, far wider than any single synthesis has been able to cover before, thanks to new sound components; new waveforms, filters, shaping, effects, LFOs, envelopes, modulations, and more, all translating to its broad assortment of sounds.

Powerful Effects Processing

Opsix mk II provides three blocks of 30 types of high-definition effects that you can use together to enhance your sounds even further. There's everything from a great mix of usable standard effects like chorus, phaser, delay, and compressor to some world-class shimmering reverbs that will elevate your sound to the next level.

Specifications

Keyboard: 37 keys (velocity and release-velocity sensitive)
Sound generating system: Altered FM sound generator
Maximum Polyphony: 64 voices (varies depending on the setting)
Structure: 6 operators, 1 filter, 3 EGs, 3 LFOs, 3 effects, step sequencer, arpeggiator
Algorithm: 40 presets + user algorithm (unique to each program)
Operator: 6 modes (FM, Ring Mod., Filter, Filter FM, Wave Folder, Effect)
Oscillator waveform: 23 waveforms (Sine, Sine 12bit, Sine 8bit, Triangle, Saw, Saw HD, Square, Square HD, Additive Saw3, Additive Sqr3, Additive Tri3, Additive 12345, Additive 1+2, Additive 1+3, Additive 1+4, Additive 1+5, Additive 1+6, Additive 1+7, Additive 1+8, Noise S/H, Noise White, Noise Pink, Noise Blue)
Filter: 11 types (LPF 12, LPF 24, LPF MS-20, LPF POLY6, HPF 12, HPF 24, HPF MS-20, BPF 6, BPF 12, BRF 6, BRF 12)
EG: ADSR
LFO: 23 waveforms (Triangle, Saw Down, Saw Up, Square, Sine, Sample&Hold, Guitar, Exp. Triangle, Exp. Saw Down, Exp. Saw Up, Step4 Triangle, Step6 Triangle, Step4 Saw Down, Step6 Saw Down, StepRnd:Time, StepRnd:Lvl&Time, StepRnd:Level, Random:Time, Random:Lvl&Time, Triangle + , Saw Down + , Saw Up + , Square +)
V.Patch: 12 routings
Effect: 30 types (Chorus, Unison Ensemble, Phaser, Phaser (BPM) , Auto Pan, Auto Pan (BPM), Flanger, Flanger (BPM) , Rotary Speaker, Auto Wah, Exciter, Enhancer, LFO Filter, 3-Band EQ, Distortion, Guitar Amp, Decimator, Grain Shifter, Master Limiter, Compressor, Delay, Delay (BPM) , Autopan Dly, Autopan Dly (BPM), Tape Echo, Tape Echo (BPM) , Early Reflection, Reverb, Shimmer Reverb, Spring Reverb)
Sequencer: Step Sequencer (up to 16 steps, up to 6 notes per step), Motion Sequencer (up to 6 lanes)
Arpeggiator: 7 patterns (MANUAL, UP, DOWN, ALT1, ALT2, RANDOM, TRIGGER)
Number of programs: 500 (350 preset programs and 150 user programs as the factory-set default)
Favourite: 64 (16 Slots × 4 Banks)
Controllers: MODULATION wheel, PITCH wheel, RATIO OP 1-6 knobs, LEVEL OP 1-6 sliders, DATA ENTRY A-F knobs
Inputs/outputs: Headphone (6.3 mm stereo phone jack), OUTPUT L/MONO and R (impedance-balanced 6.3 mm TRS phone jacks), DAMPER (6.3 mm phone jack, half-damper not supported), MIDI IN and OUT connectors, USB B port
Power supply: AC adapter (DC12V)
Power consumption: 5 W
Dimensions (W × D × H): 565 × 338 × 90 mm / 22.24" × 13.31" × 3.54"
Weight: 2.9 kg / 6.93 lbs.
Included items: AC adapter
Accessories (sold separately): DS-1H damper pedal, PS-1 pedal switch, PS-3 pedal switch

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Flagship model in IK's Uno Synth range, the Pro X adds extra synth power to the three-oscillator analogue design, with plenty of hands-on control and sequencing power.

Supplier's Notes:
Freedom of sound

Paraphonic dual filter analogue synthesiser

Embark on a liberating sonic adventure with UNO Synth PRO X, a powerful analogue synthesizer that'll ignite your creativity and elevate your music to new dimensions. Prepare to be inspired as you explore a world of infinite possibilities, where technology meets the timeless allure of analogue warmth.

Get creative

Featuring three discrete wave-morphing oscillators, the UNO Synth PRO X invites you to explore a vast sonic landscape. Unleash your imagination with PWM, sync, FM, and ring modulation capabilities: Your sonic palette knows no bounds.

Unrivalled sound sculpting

Discover a new realm of sonic possibilities with the UNO Synth PRO X's dual-filter design, combining classic OTA and SSI-chip-based filters. Immerse yourself in the moment as you weave intricate textures and shape your sound to perfection. Dive deeper into sonic exploration with the 16-slot modulation matrix enabling you to create intricate and evolving textures.

Sound connection

Take complete control over your music with over 30 hands-on controls, providing immediate access to your sound-shaping tools. With USB, MIDI, CV and Gate in/out options, integrating the UNO Synth PRO X into your setup is effortless.

4 kinds of effects

With 10 studio-quality FX in three slots and an analogue drive, your music will further come to life with warmth and character.

3 effects slots + analogue drive
Vintage chorus and uni-vibe
5 different delays
Hall, plate and shimmer reverbs

From sequencing to arranging

Unleash your creative potential, easily creating complex ever-evolving sequences. Try the 10-mode arpeggiator, equipped with a pattern designer to bring your melodies to life. New horizons are just around the corner with the Bassline mode, along with legato, mono and paraphonic modes, offering unprecedented expression of your musical ideas.

Advanced paraphonic 64-step sequencer
Per-step parameter recording with up to 48 parameters
Sequence randomizer that follows the scale you select
Parameter automation per step and real-time
10-mode arpeggiator with pattern designer
New Bassline mode plus legato, mono and paraphonic modes

Seamless DAW integration

With 256 user-editable presets the UNO Synth PRO X is a playground for sonic fun and exploration. Effortlessly sculpt save and recall your own custom sounds recapturing every moment of your creativity. And with the included Editor/Librarian software providing seamless control from your Mac or PC anything becomes possible. The Editor works as both a standalone application and as a plug-in inside your favourite DAW. This means you can program and play the UNO Synth PRO X just like a virtual instrument.

Designed for portability
The UNO Synth PRO X is not only a fun sound-design partner but also the perfect musical companion on the go, adapting to any environment. From backpack to mainstage, new sonic destinations will always be within reach.
Ultralight and ultraportable
PSU or USB battery pack power supply
Balanced stereo and headphone outputs

Custom travel bag available

Whether you're a seasoned sound designer or on the way to becoming one, UNO Synth PRO X is here to travel physically and sonically wherever you go.

UNO Synth PRO X Specifications

Sound generation
3 discrete wave-morphing oscillators
3 super-fast envelopes with loop and retrigger options
PWM, sync, FM and ring modulation
Dual-filter design, OTA and SSI-chip based
12 studio-quality FX in 3 slots + analogue drive

Performance tools
Advanced paraphonic 64-step sequencer
10-mode arpeggiator with pattern designer
New Bassline mode plus legato, mono, paraphonic
Audio input to filters and FXs or pass-through

Complete controls
Over 30 hands-on controls
16-slot modulation matrix
256 user editable presets
USB / MIDI / CV / Gate in/out
Backlight control and onboard factory preset restore
Advanced software control for Mac/PC

Ready for travel
Ultralight and ultraportable
PSU or USB battery pack power supply
Balanced stereo and headphone outputs
Editor/Librarian included
Optional gig bag available

Dimensions
Size (W x D x H): 33.3 x 15 x 5 cm, 13.11 x 5.91 x 1.96 in.
Enclosure: Plastic
Weight: 800 g, 1.76 lb
Power: iRig PSU-3A (included) or USB (5V/1.5A, 7.5W or above)

Package includes
UNO Synth PRO X
1x USB-C to USB-C Cable - 60 cm, 23.6 in.
Power Supply Unit
Quick start guide
Registration card

NOTE: USB power has inherent ground noise, so when connecting the UNO Synth directly to your computer via USB, you may hear more noise and interference than when the synth is connected to a USB wall charger or running via batteries. With the direct computer connection, you can reduce the USB ground noise and other interference by either using a USB isolator or a custom TRS cable into a balanced input on your preamp or audio interface where the ground is not connected at the balanced input side.

UNO Synth Pro Editor Compatibility

Computers
64-bit application. Requires a 64 bit CPU and Operating System.

Macr (64-bits)
Minimal: macOS 10.15 or later.

Windowsr (64-bits)
Minimal: Windows 8 or late

Notes: Specially tuned for bass sounds, the Minilogue returns in this new format. Same great analogue synth architecture, updated to create a low-end monster.

Supplier's Notes:
Minilogue Bass is the evolution of the iconic Korg Minilogue into an all-analogue bass powerhouse.

An expandable poly-synth that retains the hands-on control and immersive playability of the original, Minilogue Bass drops deep, dark, thunderous low-end for cutting production-ready bass.

Production-ready bass

Minilogue Bass includes patches optimized by professional bass and synth programmers, ready to drop into your track or performance. But that's just the beginning - everything can be customised- the analogue possibilities are virtually endless.

All 100 preset patches are exclusive to Minilogue Bass, and can be further expanded with an additional 100 user programs for a total of 200 slots.
Powerfully analogue

The thickness, presence, and immense sonic palette provided by Minilogue Bass is due to an all-analogue signal path. It has two VCOs, a VCF, two EGs, a VCA and an LFO, while retaining the hands on control and unique wave shaping through oscillator harmonics from Minilogue.

Minilogue Bass includes cross modulation, oscillator sync, and a ring modulator, alongside a high pass filter delay to further expand your sound creation possibilities.

Eight voice modes

Minilogue Bass is a four-voice poly synth, with eight voice modes for broad versatility. Alongside POLY and CHORD modes, DUO stacks two voices in unison, UNISON works as a 4 part mono synth, MONO is monophonic but with a sub-oscillator playing an octave lower, DELAY plays 3 voices in sequence after the first, ARP is a 4 voice arpeggiator, and SIDE CHAIN lowers the volume of previously played notes.

16-step sequencing

Minilogue Bass offers powerful and intuitive sequencing possibilities. The 16-step polyphonic sequencer also captures the motion of up to four real-time controls, and can be overdubbed or step-sequenced, alongside the ability to change the root position of the playback by playing a key.

Overview

Sound visualisation

Minilogue Bass has an OLED oscilloscope that shows you the waveform as you sculpt your sound.

Sound librarian

The Minilogue Bass Sound Librarian allows for easy organisation of programs inside your synth, and can also save the entire library to a computer. It even gives the ability to load any existing Minilogue patches alongside factory and bonus libraries from Korg.

Solid looks

The sand-blasted 2mm aluminium front panel on Minilogue Bass features an edgy appearance, which is emphasised by the inverted black and red keys. A red-coloured wood rear panel further adds to a unique appearance.

Minilogue bass is also roadworthy - with metal shaft chassis-mounted potentiometers and rubber coated knobs complementing its powerful and dynamic sound creation possibilities.

In sync

Alongside MIDI and USB, Minilogue Bass has a sync connector for effortless connectivity with Volcas, Electribes and SQ-1 sequencer.

Specifications

Keyboard: 37-keys (Slim-key, velocity sensitive)
Sound Generation: Analog synthesis
Maximum Polyphony: 4 voices
Program

200 programs (100 Presets / 100 Users)
Each program includes voice mode and sequence data settings
Up to eight favorite programs can be registered
Voice Modes: 8 modes (Poly, Duo, Unison, Mono, Chord, Delay, Arp, Side Chain) -
VOICE MODE DEPTH can vary different parameters in each mode

Main Synthesis Parameter
VCO1: Octave, Wave (Saw, Triangle, Square), Pitch, Shape
VCO2: Octave, Wave (Saw, Triangle, Square), Pitch, Shape
VCO2 MODULATION: Cross Mod Depth, Pitch EG Int, Sync, Ring
MIXER: VCO1, VCO2, Noise
FILTER: Cutoff, Resonance, EG Int, Filter Type (2-Pole, 4-Pole), Keytrack, Velocity
AMP EG: Attack, Decay, Sustain, Release
EG: Attack, Decay, Sustain, Release
LFO: Wave (Saw, Triangle, Square), EG Mod (Int, Rate, Off), Rate, Int, Target (Pitch, Shape, Cutoff)
DELAY: Hi Pass Cutoff, Time, Feedback, Output Routing (Post Filter, Pre Filter, Bypass)

Sequencer
16-step polyphonic sequencer
Motion sequence can be used on up to four parameters

Controls
41 dedicated panel controls deliver immediate parameter access
A slider can control different parameters for each program

Display: Real-time OLED oscilloscope provides visual feedback of parameter changes
Connectors: Headphones (6.3mm stereo phone jack), Output (6.3mm monaural phone jack), Audio In (6.3mm monaural phone jack), Sync In (3.5mm monaural mini jack), Sync Out (3.5mm monaural mini jack), MIDI In, MIDI Out, USB Type B
Power Supply: AC adapter (DC9V)
Power Consumption: 8 W
Dimensions (W x D x H): 500 x 300 x 85 mm / 19.69" x 11.81" x 3.35"
Weight: 2.8 kg / 6.17 lbs.
Included Items: AC adapter

Notes: Complete system built on Tangible Waves's AE modular format. Includes analogue sound sources, drum sampling, sequencing and everything needed to make music in a single unit.

Supplier's Notes:
The Synth Explorer "Ultimate" is a fully featured modular synthesizer which has been designed primarily for educational purposes. It offers a lot of synthesis features in a very small and portable package and includes the modules that invite for DIY modification and experimentation with code and circuits.

This system includes the following modules:

MASTER I/O (power, MIDI, CV/Gate, Audio in/out)
2OSC/d (two oscillators with sawtooth and square waveforms)
DRUMKIT 010 (lofi drum samples)
2LFO (two low frequency oscillators with various waveforms)
2ENV (two attack/decay envelopes with looping function)
WASPFILTER (an iconic filter with a lot of character)
SVFILTER (a state variable filter which can go into self oscillation)
2VCA (two voltage controlled amplifiers)
BRAEDBOARD (a blank canvas for circuit experiments)
2S&H (dual sample and hold)
2ATT/CV (dual attenuator and CV generator)
MM-DIV (multi mode clock divider)
SEQ8 (8 step CV and Gate sequencer with different run modes)
QUANTIZER (4 channel CV quantizer with many different scale modes)
METER (oscilloscope, frequency spectrum, tuner, voltmeter)
GRAINS (fully programmable module based on the Arduino)
MIXER 4-4 (two 4 channel mixers)
DELAY (analogue delay)
HPAMP (headphone amplifier with dual outputs and volume control)

Notes: Red version of Cyclone's excellent bass synth, replicating the sound of the iconic Roland TB-303. Fully analogue synth with modernised sequencer and classic acid sound.

Supplier's Notes:
A full analogue synth clone of the famous TB303, coming with a lot of new features and improvements, from the sound point of view as well as the ergonomics of the machine and the sequencer.

A new design, new pots very smooth, new features for Live jam, 2 new sequencer modes for even more creativity, added CV / Gate (and even more) outputs to play your favourite synths!

The design of the analogue circuit (composed of 1 VCO) and the audio engine has been improved compared to the previous version, giving it a warm and groovy sound thanks to the addition of the Shuffle (not present on the original).

The very intuitive sequencer takes on the original spirit while bringing new and unique features such as Mute and Hammer, which gives it a great flexibility for live jam and more sound variations, as well as 2 new sequencer modes to create New patterns.

Specifications

Bass Bot TT-303

VCO

Monophonic
Waveforms: Sawtooth or Square
Frequency Range: 20Hz-850Hz

Main Controls

Tempo Knob
Volume Knob
Track/Pattern Bank Selector Knob
Mode Selector Knob
Power On/Off Switch

Audio Controls

Tuning Knob
Filter Cutoff Frequency Knob
Filter Resonance Knob
Filter Envelope Modulation Amount Knob
Filter Envelope Decay Knob
Accent Amount Knob
Waveform Selector Switch

Data Storage

User Patterns: 432 (9 banks of 48 patterns)
Pattern Lab Patterns: 108 (9 banks of 12 patterns)
Preset Patterns: 108 (9 banks of 12 patterns)
User Tracks: 9

Operating Modes

Pattern Write | Loop Edit |Pattern Lab | Arpeggiator
Pattern Play | Preset | Track Play | Track Write | MIDI

Per-step Modifiers

Down Octave | Up Octave | Accent | Slide
Mute | Hammer | Rest / Tie

Pattern Features

Pattern Length: 1-64 steps
Per-step modifier assignment
Time scales: 16th note, 32nd note, 8th note triplet,
16th note triplet
Assignable pattern LED color
Pattern Copy / Paste functions
Intelligent procedural pattern generator
Pattern-based Arpeggiator
Pattern Mutate function

Track Features

Visual track programming system
Maximum Length: 144 bars | Per-bar transpose option

Global Features

Shuffle Amount | Slide Time | Gate Length |
Illuminated buttons: 26
Tap Tempo Input | Automated VCO calibration |
System LED colour |
MIDI In / Out channels

Outputs

Main Mix (1/4" mono, +15dBu)
Headphone (1/4" stereo, +10dBu)
VCO Waveform (1/8", Sawtooth: 5Vp-p, Square: 3.7Vp-p)
Control Voltage (1/8", 1V/octave, range 1V 5V)
Gate (1/8", 0V 12V)
Accent On (1/8", 0V 5.5V)
Clock (1/8", DIN Sync compatible, 0V 5V)
Start/Stop (1/8", DIN Sync compatible, 0V 5V)
MIDI Out / Thru

Inputs

Filter In (+4dBu nominal, 100kO input impedance)
Power (9VDC, 300mA) | MIDI In

PC Functions

Cyclone Studio application for PC & Mac enables Bass Bot software update and user data backup & restore using MIDI/SysEx transfer.

Physical

Dimensions: L310mm x W130mm x H35mm
Weight: Unit 783g (Boxed with accessories) 1.332kg

Included Accessories: 100-240v Universal Power Adapter | Near Invisible Force Field | Case Transporter | Printed User Manual

Available Accessories: 7 Lines 1/8 to 1/4 output cable snake | Triple 100-240v Universal Power Adapter

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Latest incarnation of Buchla's legendary modular synth. Massively creative with incredible sound and history stretching all the way back to the 1960s.

Supplier notes:
The evolution of the legendary modular analog synthesizer by Don Buchla. The Buchla Easel Command is the newly updated 208C in a standalone desktop form with MIDI and CV control.

Buchla's own Joel Davel led the charge to create a new version of the legendary Music Easel instrument with more modular flexibility and independence, while also providing the means to easily interface with more devices, such as the various DAWs like Ableton and MIDI controllers, including the very expressive Sensel Morph. It's still fully analog in its default configuration and provides the unique and exquisite Buchla experience with greater functionality at a lower cost.

Notes: ***B-STOCK: Box opened, product in perfect working order***


The Arpopone from LepLoop is a little synth-voice for generating a melody or bass line and a chord section at the same time. It is based on analog ramp dividers of which each one generates a voltage ramp starting from a master clock that can be internal or external.

Trig1 and Trig2 potentiometers set the number of clock pulses.

With the Trig Mix switch it is possible to select between a single trigger (1 or 2) or both (1+2) to advance the scales.

The Scale Step potentiometer sets the number of steps for the two scale generators.
In the mixer section, the two scales are summed together to obtain a more complex pattern. The amount of each scale can be set by two controls and can be positive (ascending scale) or negative (descending scale).

With the VCO Pitch knob, the melody can be transposed while maintaining the same interval between notes.

The note generated by the VCO is fed to a chain of dividers to obtain four sub harmonics of the original note. One of these is the bass section with its own filter and envelope, the other three form the chord section with their envelope.

The two envelope sections are identical, both have a selector for different trigger sources:

Trig1 & Trig2: the envelope starts at the flash of the green LED (bass) or yellow LED (chord)
SB1 & SB2: the envelope starts at the first step of Scale1 (bass) or Scale2 (chord)
White & Blue: the envelope follows the intensity of the white LED (bass) or the blue LED (chord). Except for this setting the envelope length is set by the two controls Bass ENV and Chord ENV. Additionally, an EXT CV input allows to provide an external envelope.
The bass channel is passed through a resonant low-pass filter with Cutoff and Resonance control.

Finally the Bass and Chord channels are mixed together. The output level is set by the Bass LEV and Chord LEV controls.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Keyboard version of IK's three-oscillator, dual-filter analogue synth. Classy purist analogue tones with some nice modern features like a step sequencer and effects. Also available in a cheaper, capacitive keyboard version.

Supplier's Notes:
Next generation analog for everyone

UNO Synth Pro gives you the power to create nearly any analog synth sound you can imagine. With its unique dual-filter, 3-oscillator paraphonic design, 256 presets, 64-step sequencer, studio-grade effects, expanded connections and much more, UNO Synth Pro breaks new ground for music makers.

Available in two form factors to suit all players' needs- stage-ready with metal housing and premium keybed; or ultra-portable, USB-powered with capacitive keyboard- UNO Synth Pro offers everyone the next generation of analog sound design in a smart format that fits any space or budget.

3 analog oscillators offer continuously variable waveshape, including pulse-width modulation. Oscillators can be hard-synced for more harmonically-complex tones, and oscillator FM (frequency modulation) lets you shape everything from bell-like sounds to screaming industrial tones. UNO Synth Pro even includes ring modulation for wobbly, sci-fi sound, and a white noise generator for a wide range of percussive sounds and epic rises.

Recreate famous synth sound sources or forge entirely new ones - UNO Synth Pro has the tools you need.

In addition to the original UNO Synth's 2-pole OTA multimode filter, UNO Synth Pro adds a new 2/4-pole SSI LP filter with self-oscillation. The dual filters can be used in series or parallel, with invertible phase, for a total of 24 possible filter combinations.

In short, the UNO Synth Pro can recreate the filter sound of the most famous classic synths as well as deliver fresh new options to the limits of your imagination.

UNO Synth Pro offers 2 full ADSR envelopes, one dedicated to the filter and the other to amplitude, with both available as sources to modulate everything from oscillator pitch and waveshape to LFO speed or even other envelope stages.

2 LFOs (low-frequency oscillators) can create classic synth vibrato, wah and tremolo as well as do more complex modulations including audio range FM.

And a 16-slot modulation matrix makes routing all these a breeze. You can quickly and easily design even the most sophisticated modulation scheme, with both internal and external sources, including MIDI controllers.

IK's experience in modeling analog studio effects is decades long. For UNO Synth Pro, you'll find a super warm and organic true-analog overdrive, plus 12 studio-quality effects in three simultaneous slots: modulation, delay and reverb. External signals can also be routed through these effects, with pre-effects filtering for maximum flexibility.

UNO Synth Pro provides an enhanced version of the original's long-lasting capacitance-sensing keys along with pitch and mod strips for enhanced expression. And it adds firm-touch rubber pads for the control sections, plus LED-backlit indicators and an LED display for key information, making it easier than ever to use UNO Synth Pro live on stage or in deep programming sessions in the studio.

UNO Synth Pro offers 256 user-editable presets, each capturing the full state of the sound engine from oscillators to effects.

An onboard 64-step sequencer offers both step and real-time recording, with automation for up to 40 parameters, letting you create incredibly intricate and evolving soundscapes. You can even write CV and gate automation.

And a 10-mode arpeggiator makes it easy to create intricate patterns and runs plus a new "chord mode" that takes advantage of UNO Synth Pro's paraphonic design.

UNO Synth Pro offers two noiseless, balanced stereo outputs as well as headphone out, for superior audio quality in any situation.

USB and 5-pin DIN MIDI In and Out make it easy to integrate with other synths, Mac/PC and mobile devices, and its assignable CV/Gate connections lets UNO Synth Pro interact effortlessly with your Eurorack or other modular system.

And now, audio input allows access to the filter and FX section for external signals, in addition to the original thru-put for daisy-chaining multiple units together without using a mixer.

Free Editor

Free UNO Synth Pro Editor for Mac/PC and iPad now available for all purchasers to download. This gives you access to all the advanced features 'under the hood' to manage presets and to easily create your own directly from your computer. Full details on the editor here: https://www.ikmultimedia.com/products/unosynthpro/?p=editor

Software Promo
All purchasers of UNO Synth Pro can now claim 2 free software downloads from IK's SE or CE product range: AmpliTube 5, SampleTank

Dimensions:
Size (W x D x H): 55 x 30 x 7 cm, 21.65 x 11.8 x 2.75 in.
Enclosure: Metal/plastic
Weight: 5.8 kg, 12.8 lb
Power: Power PSU

Package includes:
UNO Synth Pro
1x Micro USB to USB Cable
Power Supply Unit

Notes: ***B-STOCK: Box damaged, missing documentation, product in perfect working order***


Keyboard version of IK's three-oscillator, dual-filter analogue synth. Classy purist analogue tones with some nice modern features like a step sequencer and effects. Also available in a cheaper, capacitive keyboard version.

Supplier's Notes:
Next generation analog for everyone

UNO Synth Pro gives you the power to create nearly any analog synth sound you can imagine. With its unique dual-filter, 3-oscillator paraphonic design, 256 presets, 64-step sequencer, studio-grade effects, expanded connections and much more, UNO Synth Pro breaks new ground for music makers.

Available in two form factors to suit all players' needs- stage-ready with metal housing and premium keybed; or ultra-portable, USB-powered with capacitive keyboard- UNO Synth Pro offers everyone the next generation of analog sound design in a smart format that fits any space or budget.

3 analog oscillators offer continuously variable waveshape, including pulse-width modulation. Oscillators can be hard-synced for more harmonically-complex tones, and oscillator FM (frequency modulation) lets you shape everything from bell-like sounds to screaming industrial tones. UNO Synth Pro even includes ring modulation for wobbly, sci-fi sound, and a white noise generator for a wide range of percussive sounds and epic rises.

Recreate famous synth sound sources or forge entirely new ones - UNO Synth Pro has the tools you need.

In addition to the original UNO Synth's 2-pole OTA multimode filter, UNO Synth Pro adds a new 2/4-pole SSI LP filter with self-oscillation. The dual filters can be used in series or parallel, with invertible phase, for a total of 24 possible filter combinations.

In short, the UNO Synth Pro can recreate the filter sound of the most famous classic synths as well as deliver fresh new options to the limits of your imagination.

UNO Synth Pro offers 2 full ADSR envelopes, one dedicated to the filter and the other to amplitude, with both available as sources to modulate everything from oscillator pitch and waveshape to LFO speed or even other envelope stages.

2 LFOs (low-frequency oscillators) can create classic synth vibrato, wah and tremolo as well as do more complex modulations including audio range FM.

And a 16-slot modulation matrix makes routing all these a breeze. You can quickly and easily design even the most sophisticated modulation scheme, with both internal and external sources, including MIDI controllers.

IK's experience in modeling analog studio effects is decades long. For UNO Synth Pro, you'll find a super warm and organic true-analog overdrive, plus 12 studio-quality effects in three simultaneous slots: modulation, delay and reverb. External signals can also be routed through these effects, with pre-effects filtering for maximum flexibility.

UNO Synth Pro provides an enhanced version of the original's long-lasting capacitance-sensing keys along with pitch and mod strips for enhanced expression. And it adds firm-touch rubber pads for the control sections, plus LED-backlit indicators and an LED display for key information, making it easier than ever to use UNO Synth Pro live on stage or in deep programming sessions in the studio.

UNO Synth Pro offers 256 user-editable presets, each capturing the full state of the sound engine from oscillators to effects.

An onboard 64-step sequencer offers both step and real-time recording, with automation for up to 40 parameters, letting you create incredibly intricate and evolving soundscapes. You can even write CV and gate automation.

And a 10-mode arpeggiator makes it easy to create intricate patterns and runs plus a new "chord mode" that takes advantage of UNO Synth Pro's paraphonic design.

UNO Synth Pro offers two noiseless, balanced stereo outputs as well as headphone out, for superior audio quality in any situation.

USB and 5-pin DIN MIDI In and Out make it easy to integrate with other synths, Mac/PC and mobile devices, and its assignable CV/Gate connections lets UNO Synth Pro interact effortlessly with your Eurorack or other modular system.

And now, audio input allows access to the filter and FX section for external signals, in addition to the original thru-put for daisy-chaining multiple units together without using a mixer.

Free Editor

Free UNO Synth Pro Editor for Mac/PC and iPad now available for all purchasers to download. This gives you access to all the advanced features 'under the hood' to manage presets and to easily create your own directly from your computer. Full details on the editor here: https://www.ikmultimedia.com/products/unosynthpro/?p=editor

Software Promo
All purchasers of UNO Synth Pro can now claim 2 free software downloads from IK's SE or CE product range: AmpliTube 5, SampleTank

Dimensions:
Size (W x D x H): 55 x 30 x 7 cm, 21.65 x 11.8 x 2.75 in.
Enclosure: Metal/plastic
Weight: 5.8 kg, 12.8 lb
Power: Power PSU

Package includes:
UNO Synth Pro
1x Micro USB to USB Cable
Power Supply Unit

Notes: ***B-STOCK: Box opened, product in perfect working order***


Two decades in the game and the mighty MicroKorg remains a classic. Crystal version celebrates the anniversary with a fresh new look and the same punchy sound.

Supplier's Notes:
A shining homage to two decades of microKORG legacy

The microKORG was originally released in 2002 and has remained strong for two decades. Countless tracks and artists have made use of the amazing possibilities it offers and it continues to be one of the most popular choices for musicians on stage and in the studio.

The instruments that musicians recognise as "classics" are those that are loved and always in use, regardless of times and trends. The word "classic" symbolises musical instruments that are revolutionary in their field. There may be imitations of a classic, but the distinct character of the original shines more brilliantly and is only enhanced by time.

Two decades ago, the portable, battery powered microKORG was born with a radical new micro-keybed, a powerful Vocoder and ready-to-use sounds ideal for contemporary genres delivering countless hit performances, and instantly revolutionising the way musicians played. This compact sound monster introduced synthesis to a vast number of non-keyboard playing musicians and created a way of making music we now take for granted: a small keyboard resting unassumingly atop a larger one onstage, made for use by hobbyists and pros alike and finding itself front and centre of studios worldwide from the smallest bedroom to the largest pro recording facility.

To celebrate the 20th anniversary of its release, the special edition microKORG Crystal offers a unique and stunningly stylish take on this beloved synth - now a classic in its own right.

The microKORG was originally released in 2002 and has remained strong for two decades. Countless tracks and artists have made use of the amazing possibilities it offers and it continues to be one of the most popular choices for musicians on stage and in the studio. microKORG Crystal is the ultimate reincarnation of this iconic synth.

"Skeleton" type semi-translucent chassis, with matching knobs and controls

Previously unchanged, the microKORG Crystal features a new take on the structure of the microKORG, with a semi-translucent chassis that lets you see the electronics and internals. Even the controllers are semi-transparent, including the knobs, dials and wheels. As a commemorative model, the microKORG Crystal is great fun to look at from any angle, and as its name suggests, it "crystalizes" the energy and feelings of the KORG team behind its birth.

A panel with a beautiful sheen

The microKORG Crystal features a stainless mirror-finish front panel that blends perfectly with the semi-translucent knobs and dials, blurring the limits between you and your instrument and providing a cosmetic impact never seen in any other musical instrument.

Aluminium side panels for a sturdy feel

The original microKORG featured wooden side panels that suggested a retro feel, serving as an elegant accent to the analogue modelled synth engine. This new special microKORG features sleek aluminium side panels for a clean and depurated look.

Dedicated transparent carry bag

The microKORG Crystal features a stainless mirror-finish front panel that blends perfectly with the semi-translucent knobs and dials, blurring the limits between you and your instrument and providing a cosmetic impact never seen in any other musical instrument.

Specifications

Sound generation:
Analogue Modelling Synthesis System

Synthesizer program:
Multi Timbral: 2 (max, Split/Dual Mode)

Voices: 4 voices

Sound source:
2 Oscillator + Noise Generator
Multi Mode Filter (-24dB/octLPF,-12dB/oct LPF/BPF/HPF)
EG×2
LFO×2
Virtual Patch×4

Voices: 4 voices

Vocoder program

Voices: 4 voices

Sound source:
1 Oscillator +Noise Generator
EG×1
LFO×2 8
Channels vocoder
Level and pan of each channel can be edited
Formant Shift function

Programs: 128
Effects: Modulation effects (3 types), Delay (3 types), Equalizer
Arpeggiator: 6 types

Controllers
Real-Time control knob X 4 (3 level Selection),
Arpeggio ON/OFF

Keyboard: 37 Keys (mini-keyboard, keyboard has velocity)
Inputs: AUDIO IN 1,2, Level switch LINE/MIC, [AUDIO IN 1, 2 (LINE) ], [AUDIO IN 2 (MIC)]
Outputs: L/MONO, R, Headphones
MIDI : IN, OUT, THRU
Display : 3 characters×1 line with 8 segment LED
Power supply: DC 9V (AC adapter)
Power: 6.4w Max
Dimensions: 524 x 232 x 70mm
Weight: 2.4 kg (instrument only, without batteries or microphone)
Included items: AC adapter, condenser microphone, dedicated transparent carry bag

Notes: Combining analogue-style sound with digital convenience, the KingKorg Neo is a proper all-rounder for both recording and live performance. Features modelled emulations of classic Korg synth features.

Supplier's Notes:
The KingKORG NEO: a virtual analogue synthesiser that stands out with its analogue-like layout and intuitive, flexible editing. This compact powerhouse features 37 full-size keys and a versatile vocoder, making it perfect for both studio and stage. With our cutting-edge XMT sound engine, it delivers a wide range of classic and futuristic sounds. Designed for the contemporary musician, the KingKORG NEO is the ultimate tool for exploring new soundscapes and pushing musical expression.

KingKORG NEO features our XMT virtual analogue sound engine. XMT stands for eXpanded Modelling Technology and was created to offer an expansive array of sounds while ensuring simplicity in operation.

Gone are the days of laborious oscillator adjustments for sound crafting. The KingKORG NEO streamlines this process with pre-set algorithms. These carefully designed combinations of different oscillator types and quantities empower you to quickly shape rich, stage-ready tones with ease.

Embracing the demand for diverse tonal capabilities, the KingKORG NEO comes loaded with a wide range of oscillator algorithms. From the classic sawtooth and square waves to the more intricate noise patterns typical of analogue synthesizers, and extending to PCM/DWGS, this synthesiser is equipped to cater to an extensive variety of musical needs and preferences.

Crafting character with iconic modelled filters

In the heart of the KingKORG NEO lies its meticulously designed filter section, a cornerstone in defining the synthesiser's unique sonic character. Korg have infused KingKORG NEO with a diverse range of filters, each adding a distinct flavour to your sound creations, an aspect where analogue modelling truly shines.

The KingKORG NEO's filter collection is a treasure trove for sound designers. It encompasses a wide array of essential analogue modelling filter types, enabling you to sculpt sounds with precision and ease. But there's more. Korg have painstakingly modelled filters that echo the iconic analogue monophonic synths of the '70s - the go-to for punchy leads and deep basses. Korg have also captured the essence of polyphonic synths from the vibrant new wave era of the '80s, and the legendary filters from Korg's own MS-20 analogue synth.

One of the most captivating features of these filters is their ability to self-oscillate when you dial up the resonance - a hallmark of classic analogue synthesis. This capability opens up a world of sonic possibilities, from creating ethereal textures to crafting powerful, resonant tones.

Vocoder wizardry

KingKORG NEO synth comes equipped with a balanced XLR input on its front panel, and includes a rugged, high-quality microphone. This setup invites you to dive into the world of vocoding instantly.

At the core of the KingKORG NEO's vocoder is a sophisticated 16-band filter, rivalling dedicated vocoder machines. This powerful feature allows you to craft classic vocoder tones, but that's just the beginning. By shifting the filter frequency with the formant shift function and finely adjusting the level and pan of each band, you open the doors to an array of unique and original sounds. Whether you're aiming for vintage charm or contemporary edge, this vocoder adapts effortlessly to any genre or style.

But there's more - the KingKORG NEO redefines flexibility. Timbre B can ingeniously be used as a modulator, providing an alternative to the traditional microphone input. This allows the vocoder effect to be seamlessly blended with the synth sound, paving the way for limitless sonic exploration.

Moreover, each of the three oscillators, A and B timbres, can be individually selected as a source for the microphone input. This unique feature enables you to synthesize a rich mix of voice and instrument, creating a fusion of timbres that's both innovative and captivating.

Masterful effects

The KingKORG NEO elevates your sound with three master effect slots, each offering six distinct effect types.

The PRE FX slot brings the grit and edge of effects like distortion and amp simulator. MOD FX infuses your tracks with the classic charm of phaser, chorus, and tremolo. For creating expansive atmospheres, the REV/DELAY slot offers ambient effects including hall reverb and modulation delay. Adjusting and selecting these effects is straightforward, thanks to dedicated dials on the front panel for each slot, complemented by FX control knobs for detailed fine-tuning.

Virtual patching

Embrace the spirit of classic synthesisers like the MS-20 with the KingKORG NEO's innovative Virtual Patch system. This intuitive feature brings the flexibility of physically patching synthesizers into the digital age. With six Virtual Patch assignments available for each timbre, you can virtually connect control signals like EG, LFO, or joystick movements to key sound parameters, including pitch and cutoff. This seamless integration allows for intricate modulation and a deeper exploration into sound-shaping, giving your music a new dimension of sonic creativity.

A universe of inspiration

KingKORG NEO's extensive library of 200 stage-ready preset programs is created for the modern music maker. These presets span across eight categories like SYNTH, LEAD, and BASS and offer an intuitive gateway to finding the perfect sound for any scenario.

Step up with arpeggiation

The KingKORG NEO comes equipped with a versatile step arpeggiator, a tool that breathes life into your performances by automatically generating arpeggio phrases based on the chords you play. Tailor your sound even further by selecting from six different arpeggio types. You can specify the duration, interval, and on/off status of each step, opening up a vast array of rhythmic possibilities.

Specifications

Keyboard: 37 keys (velocity and release-velocity sensitive)
Sound generating system: XMT (eXpanded Modeling Technology)
Maximum Polyphony: 24 voices
Timbres: Max. 2 timbres (Layer / Split)

Oscillator
Structure: 3 oscillators (choose from analog, noise, DWGS, PCM, and MIC IN types)
Number of types: 138 types (32 analog and noise, 40 DWGS, 65 PCM, 1 MIC IN

Filter
Structure: 1 filter (choose from LPF, HPF, BPF)
Number of types: 18 types (7 LPF, 5 HPF, 6 BPF)

Modulation
Structure: EG 2 units, LFO 2 units
Routing: Virtual patches 6 set

Effect
Sections: Program effects x 3 (PRE FX, MOD FX, REV/DELAY) + EQ (2Band)

Types:
PRE FX: 6 types (DISTORTION, DECIMATOR, RING MOD, GT.AMP, EP.AMP, TONE)
MOD FX: 6 types (FLANGER, CHORUS, U-VIBE, TREMOLO, PHASER, ROTARY) REV/DELAY: 6 types (HALL, ROOM, PLATE, TAPE ECHO, MOD DELAY, BPM DELAY)

Vocoder: 16-band vocoder, formant shift function, formant hold function
Arpeggiator: Up to 8 steps (number of steps can be changed), 6 types (UP/DOWN/ALT1/ALT2/RANDOM/ TRIGGER)

Programs
Number of programs: 300 programs (200 preset / 100 user)
Number of categories: 8 categories

Displays
Main: 16 x 2 character OLED display
OSCILLATOR, FILTER: 128 x 64 pixel OLED display

Audio

Mic input
Connector: XLR type (balanced)
L/MONO,R output
Connectors: 6.3mm TS phone jacks (Unbalanced)

Headphone output
Connector: 6.3mm (1/4") stereo phone jack
DAMPER (half-damper not supported)
SWITCH/PEDAL
MIDI IN/OUT
USB B connector

Power Supply: AC adapter jack (DC12V)
Power consumption: 9W
Dimensions (W x D x H)@ 565 x 338 x 92 mm / 22.24" x 13.31 " x 3.62
Weight: 3.1kg / 6.83 lbs.
Included items: AC Adapter, Vocoder mic (+ windscreen)
Accessories (sold separately): XVP-20: Expression/volume pedal, EXP-2: Foot controller, DS-1H: Damper pedal, PS-1, PS-3: Pedal switch

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Premium version of the excellent Opsix, Korg's contemporary take on FM synthesis. Full 61-note natural-touch keybed with aftertouch, 80-voice stereo polyphony and full metal construction.

Supplier's Notes:
The Ultimate Union of Power and Performance

opsix SE is a digital synth like no other. With a premium all-metal design, 61-keys, and aftertouch, it unlocks a new world of sonic capabilities. Building on the expansive sound engine in the original opsix, opsix SE enhances it with increased polyphony and voicing, resulting in a synthesizer created for superior performance and precise control.

The opsix Operator Mixer simplified FM synthesis for the first time, making it not just comprehensible but also controllable. With the addition of extra synthesis capabilities and programming, it offered a more efficient workflow and an even richer sound.

The opsix SE takes this even further. It is equipped with Korg's premium 61-key natural-touch keyboard, complete with aftertouch, delivering the exceptional tactile experience expected from Korg's flagship workstations. With a sleek, robust metal body, it's built for both the intensity of live gigs and the precision of studio sessions. The metallic knobs are optimally weighted for effortless adjustments. Underneath its exterior, the opsix SE boasts an incredible capacity of 80 stereo voices of polyphony.

The opsix SE arrives preloaded with hundreds of sounds enhanced for aftertouch control. Moreover, it is fully compatible with the sounds and samples from both the original opsix and the opsix Native software, including numerous high-quality libraries.

Build to play

opsix SE was born out of the desire to play this incredible synth with both hands. Equipped with KORG's premium 61-note natural-touch keyboard, the opsix SE offers the same outstanding tactile response as KORG's top-tier workstations. Aftertouch puts unparalleled control of all the exceptional opsix sounds at your fingertips. Of course, we've modernized the factory Performances for aftertouch and introduced some fresh ones to the mix as well. In fact, most of the opsix SE programs have been revised to make full use of aftertouch, extended keyboard, and polyphony.

Premium metal design

The opsix SE showcases a notable upgrade in aesthetics. A slim body, specifically designed for this instrument, features a striking brown painted aluminium control panel, paying homage to vintage machines. Together with the vivid, illuminating LEDs, it brings a vibrant energy to any stage performance. The side panels, painted in a sleek black metal, amplify the overall aesthetics for a luxurious finish.

Exclusive hard case included

The opsix SE ships in a dedicated hard case, including space for cables and a sustain pedal. Your instrument can travel protected, whether you're carrying it to a rehearsal downtown or packing it up for a tour.

Get Illuminated with the Operator Mixer

At the heart of every sound is opsix SE's Operator Mixer - a simple set of six faders and knobs that invite exploration. Each part lights up red to indicate carriers or blue for modulators. Manipulating them opens up new sound-shaping possibilities to breathe fresh life into your musical ideas. This straightforward, hands-on workflow is part of what makes opsix SE so unique, just like the sounds it offers.

Direct Hands-On Control

Whether you're tweaking a preset or building a patch from the ground up, the six data entry knobs on the right give you quick access to the parameters you need and seamlessly sync with the large OLED display, giving you a clear, focused direction to your workflow. Coupled with the mixer, it makes creating fresh sounds super easy and, most importantly, fun!

Select from a full range of analogue-style filters, from the radical Korg MS-20 low-pass/high-pass filter to the powerful yet smooth KORG Polysix low-pass filter that gives your sound a vintage feel. There are also two or four-pole low-pass, high-pass, band-pass, and band-reject filters with resonance.

There's even a built-in spectrum analyser and oscilloscope that gives you visual feedback via the screen on the music you're making.

Six in One Synthesis

The core of opsix is nothing short of exponential. Since waveforms can be arranged and modulated in nearly infinite ways, opsix can easily do the sonic work that is similar to numerous types of synthesis:

Subtractive

Removing parts of the sound to get the sound you want; the most widely-used synthesis. opsix uses up to six envelopes and multi-modeled filters to achieve many cutting-edge and classical analog synthesis tones.


Semi-Modular
Rerouting signal paths to change the sound. A spin through the Alogorithm section will dramatically reshape the sound by changing how the signal routing between the operators work together, and no patch cables are needed.


Analog (Modelling)
Analog-style controls and plenty of stackable waveforms take you from digital to analogue-sounding in no time. Enjoy deep basses, crisp leads, thick pad sounds, fuzzy brass tones, and so much more.


Waveshaping

Adding intentional distortion to the waveforms to achieve aggressive overtones that are either harmonic or inharmonic. This will help you achieve gritty, bitey tones dripping with character.


Additive

Stacking waveforms and blending their harmonics is key to an expansive range of harmonious, dissonant, and tension-driven sounds. With six operators available, the complete FM experience is possible, including the ability to go back in time for classic sounds you have heard throughout recording history.


Classic FM

Last but certainly not least, opsix's highly flexible and powerful architecture starts with true six-Operator FM. As a result, it easily delivers signature sounds you have surely heard on thousands of hits from the '80s on through today, and with far more polyphony than other standalone FM synths available today.

With all of these ways to realize and explore sounds, opsix SE is uniquely suited as a "future-modern-classic" synth!

Altered Reality

opsix SE is FM-based, but the similarities to the classic synthesis end there. The Altered FM architecture delivers sounds across a vast spectrum, far wider than any single synthesis has been able to cover before, thanks to new sound components; new waveforms, filters, shaping, effects, LFOs, envelopes, modulations, and more, all translating to its broad assortment of sounds.

Powerful Effects Processing

opsix SE provides three blocks of 30 types of high-definition effects that you can use together to enhance your sounds even further. There's everything from a great mix of usable standard effects like chorus, phaser, delay, and compressor to some world-class shimmering reverbs that will elevate your sound to the next level.

Automatable 16-step sequencer

opsix SE features an incredible step sequencer that rivals groove boxes for flexibility and power. Press the PLAY button on any sound and experience the complexity of the sequences! Every Program has its unique sequence stored with it, or create your very own.

You can record up to six notes per step and edit each note's velocity, gate time, and playback timing. Create long phrases or make subtle shifts in timing to emulate strums or drum rolls, something that's not possible on a typical 16-step sequencer. The motion sequencer of the opsix SE also lets you record changes of up to six parameters, creating smooth motion changes in sound within a phrase or building rhythms that change dramatically with each step.

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Celebrating the 50th anniversary of this truly iconic synth, the 'modern' take on the classic Buchla Music Easel doesn't mess with a winning formula, paring the 208C sound source with 218e touch-sensitive keyboard.

Supplier's Notes:
The Buchla Music Easel was one of the first truly portable electronic music instruments. Fifty years ago, in 1973, only a few dozen were made. Unlike many iconic technologies, the influence was not grown through force of scale, but rather the force of the ideas. The Music Easel made available virtually every musical dimension: timbre, melody, rhythm, and time; how these dimensions intersected was no longer the court of acoustics and material, but signals and voltage. The 208 Stored Program Sound Source engendered "a new functional organization [with a] particularly rapid system of patching and program storage via plug-in cards."

Taking cues from the then-recent discipline of cybernetics, the 218 touch plate was for "real-time communication" to help realize the "potential vocabulary" of the Easel, rather than exploiting existing modes of musical virtuosity. The Stored Program Cards ensured rapid repeatability and repertoire on its own terms. The battery terminals made sure the music was as portable as any acoustic instrument. And the name let you know it was designed for art rather than science.

Buchla is ecstatic to revive the Music Easel for its third run in 50 years. Buchla first released the updated 208 Stored Program Sound Source, dubbed the Easel Command, with expanded MIDI and USB capability. Next came the update of the Easel Program Manager - a complete kit for storing and recalling sounds sources, even more rapidly than imagined in 1973. The new 218 Touch Activated Voltage Source provides the optimal input facility, as originally envisioned. It is now all together in a rugged case and the advanced EMBIO module that unifies all the audio and control inputs and outputs for integration with the rest of your musical world.

More than a retro novelty, the Music Easel still speaks to a future we strive for. A technology that invites conversation, not chats, and controls that engage expression, not work. There are many new worlds to explore in this instrument created at the crossroads of the jazz and computer ages. Designed as "an integrated assemblage of functions", rather than a collection of modules, the Music Easel's colour coding, comfortable access to controls, and solid patch connections allow for satisfying sessions of sonic discovery.

The Music Easel is available for pre-order starting June 16 at Buchla.com and your favourite Buchla Dealer. Delivery of the Music Easel (modern) is expected fall 2023.

Stored Program Sound Source Model 208C

The sound source of the Music Easel is the 208C, which includes a complex oscillator and a modulation oscillator (which can also serve as another voice), each with independent switchable waveforms, as well as a noise generator, allowing for rich and intricate sound design. The 208C also features a five-stage sequencer, envelope generator, pulser and modulation source - with switchable triggers - allowing for complex patterns and evolving textures. The dual low pass gate provides dynamic control over the tone and amplitude of the sound, as well as natural-sounding decay and sustain. The 208C has a number of modulation sources, including a random voltage generator, the envelope generator, modulation oscillator, and an envelope detector. These sources can be used to modulate various parameters via the extensive patchfield - creating movement, texture, and complexity. The 208C also includes a mixer section with spring reverb.

Touch Activated Voltage Source Model 218e (v3)

The first design appeared in the 1973 release of the Buchla Music Easel and named for the spacecraft that delivered astronauts to the moon. Providing the familiar piano key layout for this early mobile music machine, the additional controls and capabilities were an interface for exploring uncharted musical territory. With the new version 3, it's been elevated with a new foundation of stable, modern electronics with incredible sensitivity and accuracy - the lightest touch will produce triggers and control voltages. The adjustable sensor has the dynamic range and durability to handle your playing. The new texture not only improves the sensing, but provides a satisfying tactile experience. As always, pressure is an expressive output, adding an extra dimension to the control. MIDI outputs velocity and polyphony, as well as channel pressure, making the 218e a uniquely expressive controller. The 218e includes portamento and an arpeggiator, which can be driven by external inputs and are allowed to interact with the automated notes to make patterns more complex. Additional controls allow you to blend different patterns and randomness to easily change from the expected to the surprising. The classic preset voltage knobs offer several possible ways to shift your sounds into new territory. Not only can the knobs be used for quick access to voltages for your patch, they can control arpeggiation modes and octave shifting. Pads output pulses for additional control. The 218e also gives you a unique interface to playing your existing MIDI gear and soft synths. Each touch outputs note name, channel pressure, and velocity for every note, along with sustain controls from a pedal. Polyphonic MIDI mode lets you play chords. The touchstrip can act as a pitch bend control, or as a mod wheel for additional expressive control. Easily configured using the front panel controls, you can send notes and controls on any MIDI channel.

Electric Music Box Input/Output (EMBIO)

Maintaining the spirit, sound, and process from the original, the new Music Easel adds a variety of new features. Buchla's latest renditions of the Stored Program Sound Source and Touch Activated Voltage Source are tied together with the Electric Music Box Input/Output (EMBIO) module. This of course provides MIDI out (mini jack and USB) and CV out from the 218, MIDI in to the 208, and the audio out from the 208C. Additional creative control comes from the Audio Mixer, for integration with other Buchla modules and systems, and the CV conditioners and controls. The slew control can turn your sequencer into a wavy modulator, or soften up a square LFO. The attenuator and crossfader gives you the opportunity to find new levels and combinations of voltages from existing ones. The pulse converter offers new rhythms to trigger. And a simple LFO provides another valuable modulator when you just can't quite let yourself flip that Mod Osc switch from "high" to "low."

Notes: A unique hardware synth, Aodyo's Anyma Phi uses physical modelling mixed with virtual analogue oscillators and filters, creating a versatile setup for sounds from resonant acoustic timbres to experimental hybrid sounds.

Supplier's Notes:
Explore and create your own sounds

Discover Anyma Phi, the essential physical modelling synthesizer. Your portal to creating new sound universes inspired from the real world, where objects collide, vibrate, and resonate.

The best of both worlds

Anyma Phi blends the classic ingredients of electronic music, like oscillators and filters, with physical modelling technology, allowing it to simulate acoustic sound sources, such as strings or reeds, as well as resonating structures, like wood, glass, or metal.

Create Unique Sounds; sound design for all

The matrix provides a quick and easy way to explore your sounds by following a physical metaphor, with four macros for each of the five stages of sound generation: Excite, Vibrate, Resonate, Global, and Animate.

Infinite Possibilities; a semi-modular powerhouse

Beyond the matrix lies an insanely powerful semi-modular synthesis engine where you can harness a wide variety of oscillators and effects, and control them effortlessly using an impressive modulator system. Going so deep into sound design has never been easier before with such a small box!

Anyma Phi Editor; standalone, but well-connected?

The Anyma Phi can hold up to 200 patches, and everything you need to create them is right on the machine. You can also benefit from the large screen of your computer (PC or Mac) to edit, manage and share patches even more easily, in a streamlined environment that displays all the synth modules at once and their interactions in real time. Learn more about the Anyma Phi's Updates and Downloads.

MIDI Controller; In tune with its environment

With its small form factor, it can sit on your keyboard, or anywhere on your desk. You can control it using any MIDI controller, keyboard or sequencer, with first-class support for wind controllers, like Sylphyo. And it also shines with World and microtonal music*!

Just Tap and Scratch; the world is your oyster

With its stereo input, you can also use the Anyma Phi as a versatile effects processor for your other gear, or use any external sound to excite its resonators and other physical models. And you don't even need a mic to get interesting sounds: just tap and scratch directly on the case of the Anyma!

Technical specifications:

Hybrid monophonic synthesizer, with physical modelling components
Memory: 200 patches
Stereo audio outputs:
L-R 1/4" mono line jack outputs
1/4" stereo headphone jack output
Stereo audio inputs:
1/4" stereo jack audio input
Internal piezoelectric mic when external input unplugged
MIDI inputs and outputs via USB and DIN ports
Powerful digital semi-modular synthesizer engine:
3 oscillator slots (more than 40 types, including wind/string physical models, modal resonators, virtual analogue and digital algorithms)
5 effect slots (more than 30 types, including resonators, granular processors, and FM operators) along 2 serial buses (Main, Aux) + 1 mono reverb
16 modulator slots (more than 40 types, including envelope generators, LFO, curves, interpolators, slew limiters, sequencers, physical and algorithmic processes, etc.)
32 mapping slots (virtual patch cords), each allowing to control any synth parameter (including another mapping) using a modulator or a controller input, with sidechain input and min/max/curve/smoothing
Responsive to pitch, pitch-bend, velocity, breath control/expression, as well as 4 other controller inputs (with MIDI learn)
External MIDI CC control for the matrix and the entire patch (via NRPN)
World-class microtonal support: up to 8 custom tunings, 50 onboard presets, onboard editor, MTS import/export
Built-in arpeggiator: 15 patterns, internal/external MIDI clock sync, custom triggers
Support for up to 3-note paraphony when building a patch
External audio processors
Automatic random patch generation (optional)
Free software editor/librarian (Mac/PC)
225 x 120 x 70 mm (8.9 x 4.7 x 2.8") and 900 gr (2 lbs)
Included: Anyma Phi, 5V PSU and USB cable
Designed and made in France

Notes: ***B-STOCK: Box opened, product in perfect working order***


Typhon has been developed with ultimate care and love, so as to be a great-sounding, portable and affordable synthesizer. It has a complex modulation routing, 256 preset memory, a 32 note sequencer, and powerful stereo effects developed by Sinevibes.

Since it is packed in a compact USB powered box, it can be carried everywhere you go!

Specifications & Connections:

USB powered (at least 500mA)
60 Playing hours with 20,000mA portable power bank
MIDI Din IN and OUT
1/4 in Stereo Out
1/8 in Headphone Out
1/8 in Mono Audio In (for routing via Typhon FX)

Dimensions: 23 x 13 x 6 cm
Weight: 1kg

Notes: ***B-STOCK: Dent on the side, product in perfect working order***


Like a greatest hits of recent Analogue Solutions synths, the Ample combines sound elements from the Fusebox with jack patch points, a patch pin matrix, plus sequencer and CV touch pads from the Generator, creating something new and unique.

Supplier's Notes:
Ample combines the best elements of several of Analogue Solutions' recent products.

The sound elements of Fusebox
Jack patch points of Concussor Eurorack
Patch pin matrix of Vostok
Echo from Dr Strangelove
Sequencer and CV touch pads of Generator

It shares all this yet still has its own sound!

Ample can be as complex or as simple as you want it to be

This synth has been given a large and diverse number of controls, that along side the patch sockets, will give even the best and experienced synthesist endless possibilities.

This synth presents the controls in a user friendly and familiar synth layout that, together with this manual and other resources, enable even the new guy to get great sounds.

Synth - Percussion - Audio Processor

Ample is a compact analogue synthesizer. Analogue - as in really analogue. Aside from the MIDI chip (which has to be digital), everything else is totally analogue using real transistors and op-amps. There are no CPU stabilised and quantised circuits, no DCOs, no digital LFOs and no digital EGs, as found on other so called analogue synths. The circuitry is based on designs dating back to the mid-1970s. So Ample has a genuine old sound.

Circuits included

3x Analogue Oscillators

There are three analogue VCOs - each providing a wealth of features and modulation choices. VCO3 can easily be utilised as a LFO.

2x Analogue Low Frequency Oscillator

LFO2(/Sync) has a triangle wave output. VCO3 can be used as an LFO and has Saw, Triangle and Square wave modulation signals.

Analogue Filter

Ample uses a four pole 24bB per octave low pass filter.

Analogue Amplifier

The VCA can be set to THRU so it is always 'open'. This allows Ample to be used as an effects processor.

2x Analogue Envelopes

There are two EGs - each having full control over ATTACK, DECAY, SUSTAIN, and RELEASE.

Modulation

Great thought has been placed into modulation route choices, allowing a wide range of sounds to be produced, including percussion and 'modular' sounds further extended by patching with the jack sockets and pin matrix.

MIDI

MIDI is intentionally kept simple - so you can concentrate on making new sounds and making music - not getting tied up with SYSEX programming.

You get the all important control over filter cut-off using MIDI Velocity.

Patchable External CV Control Sockets

Ample has many input and output audio and CV sockets - to allow the synth to be effectively re-wired to make new sounds.

The sockets also enable it to be easily used with Eurorack and other modular systems. They can be patched together.

Sequencer

Ample has a vintage style 16 step sequencer.

Touch Keys

There are 6 touch keys that each output a set voltage. Use this to play the pitch or as modulation signals. A great tool for inspiration!

Pin Matrix

A neat way to patch the synth.

Echo

Nice lo-fi echo / delay.

Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


Updated version of Korg's excellent Wavestate, drawing on the iconic Wavestation synth to create a modern take on wavetable synthesis, now with added polyphony.

Supplier's Notes:
Wavestate mkII

Extended polyphony. Extended possibilities.

Korg's legendary Wavestation introduced the world to wave sequencing, and the 37-key Wavestate mkII builds on that legacy with a reimagined, compact synth designed to satisfy today's demanding musicians and producers. MkII expands polyphony to 96 stereo voices and adds a fresh look. It's completely compatible with sounds and samples for the original Wavestate.

Overview

Korg's legendary Wavestation introduced the world to Wave Sequencing, transforming raw samples into sounds that no-one had ever heard before. The flagship OASYS, Kronos and Nautilus keyboards developed Wave Sequencing even further, expanding on its unique palette of lush, evolving pads and driving rhythms.

Now, Korg is proud to present the new Wavestate mkII, with improved polyphony (96 stereo voices) and a fresh look. It's completely compatible with sounds and samples for both the original Wavestate, Wavestate SE and Wavestate Native software, including many excellent third-party libraries. Updated sounds and software keep it fresh and the compact form-factor, with 37 full-size keys, still transports easily and fits neatly into any stage, studio, or desktop setup.

Keyboard: 37-keys, velocity sensative
Sound generation: Wave Sequencing 2.0
Polyphony: 96 stereo voices
Configuration: Performance: 4 layers, reverb, EQ
Layers: Program, Arpeggiator, Key, and Velocity Zones
Programs: Wave Sequence, Filter, Amp, Pre FX, Mod FX, Delay
Presets: 261 Performances,799 Programs, and 1042 Wave Sequences
Controllers: MOD wheel, PITCH wheel, Vector Joystick, 8 x program/Performance Mod knobs.
Effects: Pre FX x4, Mod FX x4, Delay x4, Reverb, Performance EQ

Inputs/outputs:

Audio Outputs L/MONO, R (6.3mm TRS phone jack, impedance balanced)
Headphones (6.3mm stereo phone jack)
Damper (6.3mm phone jack)
MIDI in,out
USB Type B

Power: AC adapter (DC12V, 2500mA)
Power consumption 5w
Dimensions: 565 W x 338 (D x 92 (H mm
Weight: 2.9kg