All genres charts

Notes: The J44 models are JICO CUSTOM SHOP brand alternate replacements for the iconic SHURE M44 cartridges. JICO has two products available on the market: the J44A 7 and the J44D. The J44A 7 is designed to be a replacement for the SHURE M447, while the J44D is designed to be a replacement for the SHURE M44G. The JICO J44 models are made to be as close to the actual SHURE M44 cartridges in terms of output performance.

The J44A 7 and the J44D are the same exact cartridge, just as the original SHURE M447 and M44G cartridges. The difference in the sound reproduction is created by the stylus that is used with the cartridge, which produces the distinct sound that is reproduced in conjunction with the J44 cartridges from JICO.

The N-44-7 stylus that is included with the J44A 7 offers a brighter sound than the N-44G stylus that is included with the J44D, with a thicker bass sound-the same difference as with the SHURE 44 cartridges. JICO has followed the structure of the SHURE products to release the alternative replacement. Not only the sound output is as close to the SHURE M44 cartridge models, but the tracking ability of the J44 performs as the same with sticking to a record groove with high jump/skip resistance and low record wear.

The JICO J44A 7 with N44-7 stylus provides a crisp and clear sound in the higher frequencies, with the bass being heavy, bold and pronounced. This gives a lively, vigorous and dynamic sound experience. The J44A 7 produces powerful bass frequencies with a smooth, balanced sound, similar to the specification of the genuine Shure M44-7 cartridge.

Cartridge: J44A 7
Cartridge: Type Moving Magnet
Stylus: N44-7 DJ IMP Nude
Stylus: Type Nude Conical (Spherical)
Tip Size: 0.7 mil
Cantilever: JICO S-Type Aluminium
Weight: 5.6 g
Height: 16 mm
Output Voltage: 8 mV
Frequency Range: 20Hz-20kHz
Recommended Load: 47 kO
Direct Current Resistance: 800 O
Compliance: L8.5 / V7.8
Stereo Channel Balance: 1.5 or below
Channel Separation (at 1kHz): 20 db
Tone Arm Mount: 1/2 inch standard mount
Tracking Force: 3.5-4.5 g
Glow in the Dark: True
Use: DJ (scratching)

Notes: Gorgeous stereo implementation of the classic frequency shifter sound, moving from tonal harmonics to atonal disharmony effortlessly. Separate outputs for down and up shifts, plus plenty of CV control.

Supplier's Notes:
Koszalin is a full stereo frequency shifter with two inputs and four outputs. If offers simultaneous exponential and linear through-zero control of the amount of frequency shift in 3 carefully scaled ranges (up to +/- 5kHz). Frequency shifting results in linear translation of signal spectrum producing all kinds of atonal sounds. It should not be confused with frequency scaling, also known as pitch shifting. Several stereo feedback topologies are offered with additional density control besides feedback depth, which results in spectacular stereo barberpole effects.

Through-zero modulation allows for using Koszalin's input as an FM operator. Koszalin is a digital module with a DSP behind an analog interface.

Main features:

full stereo frequency shifting
3 shift ranges: +/- 50Hz / 500Hz / 5kHz
exponential and linear through-zero inputs
internal feedback under voltage control.
10HP
12V: 140mA / -12V: 30mA

Notes: Any signal can be expressed in terms of a few parameters: frequency, phase, amplitude and timbre. It is through modulation of these aspects that synthesists create electronic sound. With Generate 3, it is now possible to create a signal and control all its parameters by through-zero modulation within a single 12 HP wide module.

Everything starts with the exceptionally precise triangle-core voltage controlled oscillator (VCO) at the module’s heart. Through-zero linear frequency modulation (FM) enables rich yet pitch-stable FM sounds, by allowing the oscillator to run backwards into ‘negative frequencies’.

The resultant triangle wave is then processed by the through-zero phase modulator, providing a total phase shift range of 900°. Phase modulation offers an interesting alternative for FM, as it enables deep FM-type tones without actually changing the oscillation frequency.

The timbre of a signal is determined by its harmonic content. This full set of harmonics can be grouped into three main parts: the fundamental, even and odd harmonics. Generate 3’s harmonics generator separates out these three timbral ‘channels’. By adjusting their relative amplitudes, a vast array of different waveforms can be created, including but not limited to the classic sine, saw and square waves.

While the amplitudes can be adjusted manually, each timbral channel supports through-zero amplitude modulation, also known as balanced or ring modulation. When audio-frequency modulation signals are applied, the harmonics become ‘split’, enriching the spectrum.

In addition to all the usual analogue synthesis techniques, the extensive set of modulation options makes Generate 3 especially suited for exploring multiphonic synthesis: a monophonic source creating a complex timbre, much like throat singing, yet by electronic means.

Notes: Updated version of a truly pioneering Eurorack module that introduced DSP effects to the format. Still sounds great, still versatile, still excellent value.

Supplier's notes:
Back in 2008, the original Z5000 was not only the world's first Eurorack DSP effects module but also the first Tiptop Audio module released. It brought voltage controlled digital effects to Eurorack for the first time and the Z5000 was eventually replaced by the Z-DSP open source platform. Now, years later with over a decade of experience developing audio effects for Eurorack signals we are introducing a totally new version of the Z5000: a compact stereo 8HP multi effect with voltage controlled parameters, VC analogue clock generator driving the DSP chip and 24 of our creme de la creme reverbs, delays, modulation, harmonization and pitch modulated effects. A number of programs in the Z5000 combine more than one effect, in series or parallel, that represent studio techniques from the early days till modern times often leaning toward the more experimental side.

Notes: Instant IDM! An unusual genre-specific module from Mystic Circuits, automatically generating complex trigger sequences. Create loops or apply real-time effects to a trigger or gate input.

Supplier's Notes:
IDUM is a gate processing effect that turns its input effortlessly into IDM. Making complex electronic music with the modular usually requires meticulous sequencing done in advance or a large ecosystem of modules. Unfortunately, the level of expertise needed to accomplish this is not accessible to the average modular user. IDUM aims to make this process easier and put Intelligent Dance Music, also known as IDM, into the hands of people with average intelligence. IDUM does not require much knowledge to get immediate and compelling results; but with some extra familiarity, this module can enable innovative music making techniques. Instead of generating musical patterns on its own, IDUM acts like an effects processor for the sequences that run through it. For example, a filter or a delay allows the user to alter their sound by twisting the knobs or modulating the parameters. Similarly, IDUM manipulates the actual gates and sequences of connected modules, but with a level of playability normally inaccessible to a sequencer. IDUM can vary carefully crafted sequences or turn your music into an onslaught of controlled chaos. Its open source code and hardware based on the beginner friendly Arduino Nano Every encourage users to tweak their modules to taste or to add new features all while ensuring future improvements as IDUM makes its way into the wild.

IDUM has eight effect modes:

HOLD - Alter the length of incoming triggers.

BURST - Generates a ratcheting effect with timing determined by the clock.

MULTIPLY/DIVIDE - Generates a ratcheting effect with timing determined by incoming triggers.

BALL - Generates a bouncing ball effect.

ROTATE - scrambles the connections of inputs and outputs.

DELAY - postpones incoming gates by a dynamic amount of time based on incoming triggers.

BREAK - preset rhythms that turn incoming triggers into breakbeats.

SKIP - manipulates the clock output to multiply the clock speed or skip forward multiple steps.

In addition to these modes, IDUM features an eight step looper that loops incoming gates as well as any effects that were active on those steps.

To control when IDUM's effects are active, the CHANCE slider sets the likelihood that on a given step an effect will activate and the LENGTH slider sets how many steps the effect will last for. The PARAM knob controls a parameter unique to each effect while the MODE knob selects the mode. All of these controls as well as the LOOP status have their own CV modulation inputs.

Unique to IDUM is its ability to manipulate external sequencers using the clock output. This includes functions like: pausing the clock when an effect is active for dynamic clock division, skipping forwards or multiplying the speed of the clock in SKIP mode, and looping a sub-section of sequencer steps in the looper. To keep everything tamed while manipulating the clock, the CYCLE switch will send out bursts of clocks to catch your sequencer up with its original sequencer position after an effect has completed. Keep in mind that not all sequencers like to be clocked fast enough to work with these features, so for best results pair your IDUM with a TREE/ LEAVES combo from Mystic Circuits.

IDUM might be the stupidest way to make IDM and Mystic Circuits are proud of that. Whether you want to add complexity to your dance floor bangers or make the most obtuse and unlistenable music imaginable, IDUM is here to help. See just how dumb your music can get with the Mystic Circuits IDUM.

Notes: This is an exact hardware replica of the Mutable Instruments Plaits module.

Width: 12hp
12V: 50mA
-12V: 5mA

Notes: ILLUMINATOR is an eight channel converter that turns Eurorack and analog CV signals into a voltage that drives LEDs and LED strips, creating a unique light show in sync with your live performance. CV signals coming from your music gear are already pulsating with the different parts and sounds of your track, so there is no need for any kind of programming or light operator.

You can focus on playing your set and let ILLUMINATOR take care of the rest, creating a dynamic visual show that follows your tracks down to every note and beat!

No presets, no memory- just your music driving the lights. Create intense strobe-like effects by connecting rapid hi-hats from your analogue drums, or use slow external LFOs for a moody ambience during your ambient sessions.

ILLUMINATOR is compatible with standard 12V LED strips that are affordable and widely available. LED strips are flexible and typically come with adhesive on the back, so it's easy to attach them to any objects and surfaces, including irregular and unusual ones. It can be your Eurorack case, synth stands, walls of the venue, furniture and even your body! This way you can create a unique light show that would otherwise require an expensive (and unwieldy!) lighting setup. Everything you need for your ILLUMINATOR show easily fits into a small backpack for just a couple hundred euros.

ILLUMINATOR can also run an art installation, as LED strips are far from its only application. It can drive anything that accepts DC 12V with a current up to 0.5A. You can hook up anything from motors, electromagnets to old-fashioned filament bulbs. It's the perfect beating heart for your weird mechanical steampunk orchestra. Your imagination is the limit!

ILLUMINATOR accepts all types of CV signals in the range from 3 to 20 volts. Each of the eight channels contains an individual trimmer pot that defines the sensitivity of the channel. It not only adjusts the optimal input range for connected CV sources, but it can also set the brightness of each LED strip. Default factory setting for all trimmer pots is made for the range of 5V, compatible with most gear out of the box.

Applying bipolar CV is also possible but the negative part of the signal will not light up the LEDs (everything below zero will be processed as zero).

CV signals can be connected to ILLUMINATOR using Eurorack mini-jacks or PULSAR-23-like pins and alligator clips. PSU DC IN and all outputs are standard DC sockets 5.5×2.1mm center plus.

Technical specs

Number of channels: 8
Supply voltage: DC 12V
Supply voltage socket: 5.5 × 2.1 mm (center plus)
Output voltage: DC 12V
Output LED socket: 5.5 × 2.1 mm (center plus)
Maximum total power of all channels: 48 watts
Maximum total current of all channels: 4A
Recommended maximum current for one channel: 0.5A
Absolute maximum current for one channel: 1.5A
Input voltage range: 3 - 20 Volts
Input impedance / with correct adjustment of the input sensitivity: > 5.7 kOm / 100 kOm
Input sockets: Eurorack mini-jacks and Pulsar-23 / Ornament-8 pins
Number of mini-jack sockets: 8 (1 for each channel)
Number of Pulsar-23 pins: 9 (1 for each channel + 1 common ground)
LED Items: 8
LED Color: 4000K x 2, Red x 2, Blue x 2, Green x 2
LED Length: 1.5 + 3 m cable
LED Power: 4.8 W/M
LED Voltage: DC 12V
LED IP Rate: IP65
Power supply Input: 100 - 240 VAC, 1.5 A, 50/60 Hz
Power supply Output: 12 DC, 5A
Dimensions: 275 x 70 x 40 mm
Weight: 300 g
Box size: 375 x 310 x 85 mm
Box weight: ~ 800 g

Product dimensions
Illuminator: 275 x 70 x 40 mm
Box: 375 x 310 x 85 mm
Net and gross weight
Illuminator net weight: 300 g
Gross weight: ~ 800 g

Notes: A Juno-inspired oscillator module? We're flattered, but credit has to go to Roland for this one. Based on the Juno-106's digitally-controlled analogue oscillators, the Castor & Pollux modernises the 80s design with a built-in LFO and hard sync.

Supplier's Notes:
Twins that dance in and out of phase, never completely together but never fully apart, bound to each other in the infinite universe.

Castor & Pollux is a dual oscillator that echoes back to the legendary Roland Juno but shines with its own unique, massive voice. It contains two digitally-controlled analogue oscillators implemented using a faithfully modernized version of the original Juno 106 design. It builds on the classic '80s sounds of its inspiration by using the second oscillator and internal LFO to layer in thick detuned sounds and harmonically complex hard synced waveforms.

Castor & Pollux II brings a redesigned interface and moves individual waveform outputs to an included expansion. Both versions have the same features and use the same firmware.

14 HP
+12 V @ 100 mA, -12 V @ 35 mA
25 mm deep
2 separate oscillators
7 octave range
9 total outputs with waveform outputs and onboard mixers
Pitch CV input jacks (0 V to 6 V) and pitch knobs (-1 to +1 octave, configurable)
Pulse width CV input jacks and knobs
Hard sync
Hardware chorusing
Internal low-frequency oscillator (LFO)

Notes: MIX KM (like Feedback's PRE KM channel strip) is based on a famous late seventies small mixer used by many electronic music bands.

Tech specs:

- 35HP front panel
- 35mm depth behind front panel including the power connector
- 6 mono input jacks ( 1 per channel)
- Pot controls for channels : Gain, Hi, Low, Aux1 send, Aux2 send, Pan, Volume
- 6 mute switches (1 per channel)
- Pot controls for master : Master Level, Headphone Level, Aux1 Return, Aux2 Return
- 2 x mono aux send jacks
- 4 mono input jacks for two stereo Aux returns
- 2 jacks for master left and right out
- one 3.5mm stereo jack for headphone out
- boxed 10 pin euro power (+12V / -12V)

Notes: The Skorn da Bask table top module is the same module as the eurorack version but in a hammond 1590BB enclosure and aluminium panel, it can be powered thru a 2,1mm negative pin power jack, compatible with Boss and Ibanez standard power supplies.

Thanks to their routing options, the VCOs can not only be used to generate audio signals, but for modulating the VCF's cutoff frequency as well. Besides processing internally produced saw tooth waves, the filter is also usable for editing sound coming from other modules. Typical Touell Skouarn, the Skorn da Bask distorts like hell. Primary application: The creation of dirty, experimental sound structures and abstract rhythms.

The front panel of Skorn da Bask shows three areas highlighted in red. These zones contain the connectors and control elements for the oscillators. Each VCO comes equipped with a pitch CV input, a tune potentiometer and two switches for defining the routing as well as the frequency range used. In detail, the oscillators can be connected to the audio or CV input of the filter. Thanks to their range switches, each VCO is able to work with audio or low frequency rates. The pitch input does not follow the standard 1v per octave.

After all, Skorn da Bask is not an ordinary oscillator module, but an experimental sound generator.

The low pass filter features a slope of 24 dB per octave. A potentiometer named FreqaNs regulates the circuit's cutoff parameter, Dasson sets the resonance. For processing external signals, there is an audio input. As long as a cable is plugged into this socket, the VCOs are disconnected from the filter's audio path. Third-company modules, like an envelope or LFO, can influence the VCF's frequency via a CV input. For damping modulation signals coming from the oscillators, there is an attenuator knob. The audio output is equipped with a level potentiometer. High settings lead to juicy overdrive effects.

Review: Who's Next is the Who's most popular album, and is widely hailed as one of the greatest commercial rock albums of all time. Coasting on the enduring international success it has received for just about five decades, the album's 50th Anniversary now sees to this humungous CD and Blu-Ray box set reissue, putting together an ultra high quality Blu-Ray audio version of the original album, as well as over 50 demo tracks and oddballs from around the time. There's also a deluge of recorded live shows on there.

Review: The Black Sabbath Hand Of Doom box set provides the ultimate collection for fans who opt to live in a world where the group never had any other vocalist apart from Ozzy Osbourne. Providing picture disc represses of all eight LPs released during the original frontman's tenure from 1970 to 1978 (2013's reunion album 13 is not included), the collection boasts the self-titled 1970 debut, the same-year follow up Paranoid, as well as the iconic slew of Master Of Reality (1971), Vol 4 (1972), Sabbath Bloody Sabbath (1973), Sabotage (1975), Technical Ecstasy (1976) and Never Say Die! (1978). Limited to 3000 copies (which isn't a large amount when considering how vital Sabbath's early material still is to this day) and complete with a large coloured poster, fan service rarely gets as ideal or essential as Hand Of Doom.

Notes: Your studio headphones

DT 900 Pro X

Trusted sound meets performance and flexibility

In launching the open-back DT 900 PRO X, Beyerdynamic are unveiling circumaural studio headphones, which are set to usher in a era for the long-established, Heilbronn-based company. While the classics of the PRO series are regarded as reference products in professional studios all over the world, the PRO line is suitable for flexible use both in the studio and while on the move. It is all made possible by the STELLAR.45 driver that loudly reproduces the best sound in studio quality without any distortion - with all playback devices.

Professional audio quality

Trusted studio sound meets high performance

The STELLAR.45 sound transducer, developed and produced in Heilbronn, Germany, delivers that proven Beyerdynamic sound at previously unattained levels of studio-headphones-class performance. This is down to the neodymium ring magnet as well as copper-clad high-tech wire. The trade-off between electrical conductivity and the weight of the wire is unique. In combination with the three-layer speaker diaphragm featuring integrated damping layer, this has created a highly efficient driver system that performs superbly on all playback devices.

The innovative membrane structure controls the axial motion of the voice coil and ensures that it remains securely positioned in the magnet gap even during high oscillations. Another benefit is vast and natural frequency response. The fast response of the transducer and the detailed transient response, produced by the low coil weight, create a sound that is always reliable and distortion free even at high sound pressure levels.

Flexibility

Wide range of applications on all playback devices



Anytime, anywhere - the wide range of applications offered by the PRO X line unleashes your creativity. Be it on an audio interface, laptop, tablet or mobile phone: Thanks to the high-performance STELLAR.45 driver, the PRO X headphones with an impedance of 48 ohms reproduce sound at volume and power to familiar levels of studio quality - on all playback devices. The cable concept is also demonstrably suitable for everyday use: the removable mini-XLR cable can be swapped out as required to be replaced with cables that have different lengths or feature other connectivity options.

Superb wearing comfort

Tailored fit for extra-long sessions

The PRO X line also embodies what these professional headphones have always been synonymous with: maximum wearing comfort. The robust spring steel headband design assures the over-ear headphones provide a secure fit and ensures durability. The supple velour ear pads are soft to the touch, as you would expect, and guarantee superior ventilation. The headband ergonomically adapts to the shape of the wearer's head with the aid of soft memory foam and, like the ear pads, can be replaced if required.

Design & materials

Built to last, featuring a sleek, robust design

Black, minimalist and reduced to the essentials. In a word: PRO.

As far as the design of and materials used in the PRO X line are concerned, attention was paid to the resilience of all components: metal headband, GRP components, a robust mini-XLR connector and hard-wearing cable. This means you are geared up on a daily basis for any professional application.

Sustainability

Sustainable headphones - made in Germany

The PRO X line headphones have been designed for daily use in challenging conditions. This is why they are handmade in Germany using premium quality materials. If required, nearly all the headphones' components can be replaced, turning these headphones into an investment that makes sense for every creator.

Technical data

Transmission type: Wired
Earpad material: Velours
Nominal impedance headphones: 48 ohms
Weight headphones without cable: 345 g
Headphone frequency response: 5 - 40,000 Hz
Nominal sound pressure level: 100 dB SPL (1mW/500Hz)
Sound coupling to the ear: Circumaural (around the ear)
Cable & plug: 3 m or 1.8 m straight cable, detachable, with 3-pin mini XLR & stereo jack (3.5 mm & 6.35 adapter)

Notes: For Eons, man has thought the sound of thunder to be from the heavens above, echoing boastfully over us as we stay safe from its greatness. However, legend tells of a stoic and indomitable beast residing in the highest mountains seen and heard only by the most brash of travelers. With gnarled and twisted horns, this creature emits a sound thicker than Earth's crust to command attention and warn all who stand in his way. This is Eons.

Eons is a five-state fuzz capable of massively thick sounds ready to test the limits of any amp's grill cloth. Use the Voltage (lightning bolt) knob to crank up to 18 volts into the pedal's circuit for massive, open fuzz sounds, or choose to starve it down to 3 volts for spatty, gated fuzz. Experiment with the Voltage and Mode knobs for nearly endless styles of fuzz tones. Find vintage-inspired sounds emanating from the stages of Woodstock to chaotic three-chord punk rock. Eons is ready for a fight.

The Eons features a five-position rotary knob that offers the following clipping configurations. Think of them as different "flavors" of the pedal:
I. Silicon soft clipping traditional fuzz that's well rounded with a huge sound; compressed and smooth.
II. Silicon clipping with an added bass boost that boosts the low end at the beginning of the circuit; compressed and crunchy.III. Germanium soft clipping with a feel of "what if a distortion and fuzz had a kid?"; crunchy and dynamic.
IV. LED clipping diodes with a slight high-end cut; dynamically dark.
V. Hard clipping silicon transistors combined with LED and Silicon soft clipping diodes. The rowdiest of the modes with tons of gain: compressed, loud, and angry.

Specs

The Eons comes in a sandy tan enclosure color with red, cream and black ink. Artwork features a stoic four horned, Markhor goat illustrated by Adam Forster.
9V DC, center negative, 100mA min
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended. Power supply not included.

Notes: Voltera is an expander for the Metron trigger and gate sequencer, adding 4 bipolar voltage tracks. Up to 16 Volteras can be connected to a Metron, providing up to 64 CV outputs.

With independent voltage ranges and quantisation settings per track, Voltera allows simultaneous real-time control of 4 different parameters, so you can set the track to the parameter you are sequencing.

When used in conjunction with Voltera, it is possible to easily sequence melodies and parameters with the Metron.

Features

4 bipolar voltage outputs in 4HP
Integrated user interface with Metron
Quantised and unquantised voltages
Up to 16 Voltera modules can be connected simultaneously to a Metron
Independent voltage ranges for each output
Analogue programming
Digital accuracy
Fast haptic operation
Power consumption: 60mA at +12V and 15mA at -12V

Depth: 43mm

HP : 4

Notes: The TRIO+ is a simple-to-use guitar pedal that listens to the way you play and automatically generates bass and drum parts that match your song. Just plug your guitar into the TRIO+, press the Band footswitch to teach the TRIO+ your chords and rhythm, then press the Band footswitch again to start playing with your own personal band! Bass and drum levels can be adjusted for the perfect mix using the TRIO+'s Bass and Drums knobs. The TRIO+ also features a Simple Bass button lets you select between 3 bass line modes for busy or simple bass lines. Pushing the Band Creator™ paradigm further, the TRIO+ also allows you to loop and custom sequence your looped guitar parts to create full songs on the fly. Press the TRIO+'s Looper footswitch to record a loop along with an unlimited number of overdubs. The Loop level can be individually controlled using the TRIO+'s Loop knob. Loops can be recorded by themselves, operating just like a traditional looper, or along with the band. You can also apply built-in effects to your guitar signal by enabling the TRIO+'s Guitar FX button, or connect your favorite effects to the TRIO+'s FX Send and FX Return jacks. The TRIO+ provides 12 music genres to choose from including Blues, R&B, Rock, Alternative Rock, Metal, Pop, Electronic Pop, Hip-Hop, Country, Folk, Latin, and Jazz. 12 song styles are available for each genre and can be selected using the TRIO+'s Style encoder, including selection between 3/4 and 4/4 time signatures. Multi-colored LEDs around the TRIO+'s Style encoder indicate which styles best match your song. The TRIO+ can learn up to 5 different song parts, perfect for creating an intro, verse, chorus, bridge and outro. Song parts can be recalled on-the-fly as the song plays back or pre-programmed as a sequence for automated playback. An optional DigiTech FS3X Footswitch can be connected to the TRIO+'s Control In jack for additional handsfree control with 3 modes of operation to select from. Up to 12 songs along with loops can be stored to the TRIO+'s Micro SD Card (included). Need to create more songs? No problem. Just insert a new SD Card and you're ready to start teaching the band your new songs. To manage all your songs and loops on a computer, download the free Librarian Manager software from digitech.com, available for Windowsr and Macr. The TRIO+ offers independent Tempo, Genre, Style, Loop Level, Bass Level, Drums Level, Headphone Output Level controls; Guitar, FX Return and Control Inputs; Amplifier, Mixer, FX Send and Headphone Outputs; Built-in Guitar Effects (relative to music genre); a Soft Click Footswitch and includes a 9V DC adapter.

General Specifications
ControlsTempo, Genre, Style, Loop, Bass, Drums, Headphone Volume
Backlit ButtonsGuitar FX, Seq, Part 1-5, Alt Time, Song, Simple Bass
FootswitchesLooper, Band
LEDsGenre types, Style 1-12, Audiolastic, Looper, Band
JacksPower, Control In, Guitar In, FX Return, FX Send, Amp Out, Mixer Out, Headphone
OtherMini USB port, microSD card slot
Bit Depth24-bit
Sample Rate44.1 kHz
Signal-To-Noise Ratio110dB, A-weighted
Maximum Recording Time230 seconds per song part i based on a minimum 50 BPM and 48 bars per part
USB TypeMini-B
SD Card TypemicroSDHC, Class 10
SD Min/Max Storage Size8 GB/32 GB
Power Requirements9 VDC external power adapter
Power Consumption7.2 W
Current Draw800 mA
Dimensions
Length5.4"
Width4.25"
Height2.5"
Weight1.46 lbs.
Audio Output
Amp Output TypeUnbalanced, 1/4" TS
Amp Output Impedance1 kO
Mixer Output TypeUnbalanced, 1/4" TS
Mixer Output Impedance1 kO
FX Send Output TypeUnbalanced, 1/4" TS
FX Send Impedance1 kO
Headphone Output Type1/8" (3.5 mm) Stereo Mini Jack
Headphone Output Impedance120 O
Audio Input
Guitar Input TypeUnbalanced, 1/4" TS
Guitar Input Impedance1 MO
FX Return Input TypeUnbalanced, 1/4" TS
FX Return Impedance1 MO
Control Input Type1/4" TRS (compatible with DigiTech FS3X)

Notes: Another banger from Dreadbox's excellent effects series. Stereo echo effects based around multiple hybrid delay stages, giving bags of character for reverb, modulation effects and classic delays.

Supplier's Notes:
Dreadbox Raindrops is a Hybrid Delay/Pitch Shifter/Reverb pedal that takes the concept of short echoes to a different level.

It is equipped with multiple delay stages and different chips and you can choose between 3 different play modes, where in each one you can have a whole new experience and alternative soundscapes. You can achieve from simple short echoes, to long, dirty and lo-fi delays and from simple pitch shifting bursts to extensively lasting reverbs.

Specifications

Circuit: Analogue Dry signal / Hybrid Delay / Digital Reverb
Bypass: Buffered OpAmp
Audio: True Stereo IN/OUT
Inputs / Outputs: TS Unbalanced 6.4mm jack
Power Supply: 9VDC BOSS style center pin negative 2.1mm (NOT INCLUDED)
Dimensions (cm): 14 x 10 x 5.6
Current Draw: 220mA

Notes: Stylus ELITE technical data

Output voltage at 1000 Hz, 5cm/sec. - 8,5 mV
Channel balance at 1 kHz - 1 dB
Channel separation at 1 kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3 dB - 20 - 20,000 Hz
Tracking ability at 315Hz at recommended tracking force - 100 um
Compliance, dynamic lateral - 13 um/mN
Stylus type - Nude Elliptical
Stylus tip radius - r/R 8/18 um
Tracking force range 2.0-4.0 g
Tracking force recommended - 3.0 g
Tracking angle - 20-

Concorde cartridge weight - 18.5 g
Recommended exclusively for Concorde ELITE

Notes: DP-2000 is a digital percussion pad with 8 touch sensitive zones and a huge library of internal sounds.

A USB-to-PC/Mac interface enables integration with a software recording suite as a trigger controller and sound source. Sounds from the flagship DM-8 kit are stored internally, along with additional world percussion instrument samples and the option to add user samples from a USB flash drive. Sounds are assignable to pads and adjusted using the intuitive user interface and control surface, and each pad has a dynamic indicator which varies in brightness to mirror the playing dynamics. Dedicated MIDI in and out connections mean that the DP-2000 can expand a live playing setup or operate from hardware sequencers and other MIDI controllers. In addition to tuning and dynamics control, dual-engine DSP effects can be applied to each sound and tailored to suit each sound. If performance space is very limited, inputs for a hi-hat pedal, kick pad and an additional trigger can turn the DP-2000 into a fully playable super-compact e-drum kit. Add the possibility of music playback from USB flash drive and comprehensive input and output options, the DP-2000 is as much at home as a standalone instrument or as an expansion to an existing drum or percussion kit.

Add hi-hat & kick triggers for a full e-drum kit
USB-C Bluetooth adaptor
USB interface to PC/Mac
Importable WAV files for custom sounds
Power supply: 9Vdc, 500mA (tip-negative) adaptor supplied
Inputs: Aux input, trigger, hi-hat, kick, MIDI 5-pin DIN, USB-C (U-Disk)
Outputs: Headphones (3.5mm), L+R output (6.3mm), MIDI, USB-B (PC/Mac)
Dimensions: 408 x 314 x 62mm
Weight: 2.8kg

In the box

The box for this item contains:

DP-2000 digital percussion pad
DC power adaptor
USB-C Bluetooth adapter

Notes: Next-generation monophonic analog synthesizer in a vivid five-colour line-up:
Fully programmable, analog synthesis for all players; monologue is the next-generation monophonic synthesizer that shares the spirit of the acclaimed minilogue, with a completely new voice and powerful new features.

The monologue is a 25-key, fully programmable monophonic analog synthesizer with a voice all its own. While sharing its sleek layout, knob-per-function workflow and high-quality construction with the best-selling minilogue, monologue is a truly unique new synth for all types of musicians; featuring new voicing and sound sculpting abilities - at an amazing price. The monologue's completely new filter, modulation, drive, and LFO can generate powerful basses and sharp leads, creating awesome mono sounds that showcase its single-voice design. The step sequencer has also been dramatically expanded, allowing more intuitive and more complex editing. With a line-up that gives you a choice of five eye-catching colours, this compact instrument has a strong personality to match your own.

Redesigned monophonic analog circuitry:
The monologue contains monophonic analog synthesizer circuitry that builds on the circuitry of the minilogue. But that doesn't mean that the monologue is simply a one-voice model of the minilogue. It's a monophonic beast with stunning power that comes from a redesigned envelope section, modulation routing, and a filter with powerful low-end punch.

The structure is 2VCO, 1VCF, 1EG, 1VCA, and 1LFO. In addition to the same distinctive circuits as on the minilogue (such as the wave shaping that shapes the overtones of the oscillator, and a sync/ring switch), the filter section uses a two-pole filter to deliver aggressive sound. Newly featured is a drive circuit that adds overtones and distortion to the sound, letting you generate fat basses and sharp lead sounds to your heart's content. The LFO rate can be adjusted into an unprecedentedly ultra-high-speed range to generate crazy space-shattering sounds, or switched to one-shot mode to act, in a sense, as an additional envelope.

Fully programmable:
The monologue goes beyond analog synths in its price range by adding 100 preset locations. Select a program for instant access to great sounds - - ranging from thick basses to deep subs to brilliant cutting leads and even percussive sequences. No need to have deep synthesis knowledge; just choose a sound and tweak - a workflow that is very familiar with musicians today. Built-in programs provide 80 preset sounds and sequences made by creative artists around the world including legendary electronic artist Aphex Twin, plus 20 user locations for saving custom sounds.

16-step sequencer for highly-evolved motion sequences:
The step sequencer of the monologue has been significantly enhanced to deliver musical, complex rhythms that are easy to capture, see, and edit. It supports both real-time recording with overdubbing capability as well as step recording that lets you record simply by pressing keys in the desired order, and you can also use the 16 physical buttons for quick editing or for improvisatory performance. The motion sequence function lets you record up to four knob movements to apply time-varying change to the sound, and allows you to record not only continuously changing values as on previous models, but also values with step-wise variation. Since it's designed to let you create different sounds at each step, you can make unprecedented sequences, such as a sequence that generates a drum pattern from a single program.

There's also a key trigger function that lets you play back a sequence while you hold down a key, and even transpose it. Another new function is slide, which can be used to produce smooth bass lines by specifying portamento for each step.

Battery-powered analog:
From smooth curves to muscular straight lines. The stylish visuals featuring aluminium and wood are inherited directly from the minilogue, but have been modified to a straight, direct design that bespeaks the power of a monophonic instrument. In spite of its stout construction, the compact and light-weight body is only 1.7 kg / 3.78 lbs., providing an unprecedented combination of toughness and portability.

In addition, unlike most analog synthesizers in its class, the monologue can operate on batteries. Even if you're a hardware performer who uses numerous units, you won't need to worry about providing additional power supplies and installation space.

Sync with Audio Sync:
In addition to 5-pin In/Out and USB MIDI, monologue includes Audio Sync connectivity, which allows it to play in time and integrate seamlessly with KORG volcas, electribes, minilogue and SQ-1. Use the monologue with your DAW as a USB MIDI controller or a versatile analog voice. Send clock over USB and use Audio Sync to chain monologue's clock to other Audio Sync-equipped products.

Notes: Xer Dualis is a compact analogue four-channel stereo mixer. Each channel has left and right inputs, a level control, and a mute.

Want to use mono signals? No problem! The left inputs normal to the right ones. On the stereo pair output, XD features a simple meter and a clip indicator to keep your mix clean. Xer Dualis is a compact and performable choice whether you need a submixer for a large system or an easy way to mix all the elements of a portable case together.

Notes: Ultra Slim. Great Design.

Lighter than an iPad!

Xkey Air is made from rugged, brushed aluminium. The same material that is used in Macs.

It only weighs 610g (1.34 lbs) so you won't even know it's there. Pop it in your backpack, or use the optional Xkey carry case.

Mac. iPhone / iPad.

(PC and Android can be connected with the WIDI BUD accessory)

Slip Xkey Air into your backpack or carry case and you're good to go.

Connect it to your favorite device, launch your favorite app - and your recording studio is open for business. Xkey Air is pro standard. But even if you're still learning to play the keyboard, you'll love the quality and features.

Wireless & Low Latency

Bluetooth 4 MIDI controller. Low latency!

Long Battery Life- Powered by a lithium battery for hours of music creation

Real Size Keys- 37 full size keys

Aluminum Body- Robust, high quality construction. Looks great. Same finish as a MacBook.

Customizable- Download the free Xkey Plus application. Configure your keyboard how you like it.

100% MIDI- Use Xkey with your favorite music apps on your favorite devices. Works out of the box.

Mobile Native- For iPhone or iPad. Compatible with hundreds of free and pro apps.

Polyphonic Aftertouch- Your pressure on the keys controls the effect individually. Professional studio standard feature.

Portable- Made for travelers and mobile users. Fit in any bag & case!

Regular Updates- Benefit from upcoming new features. Upgrade your Xkey online!

Smart Buttons- Octave Change, Pitch Bend, Modulation, and Sustain function buttons

Velocity Sensitive- Play loud with one hand, soft with the other. There's 128 levels of sensitivity.

Controls

37 full-size keys (3 octaves).
100% MIDI compliant.
Velocity sensitive.
Polyphonic aftertouch.
Pressure sensitive Pitch bend and Modulation buttons, with continuous MIDI control data.
Octave +/- push buttons.
Sustain button.
Rechargeable Lithium Battery
Firmware upgradable via USB.
Configurable via Xkey Plus free app for iOS, Mac OSX, and Windows.
Connectors
MIDI: USB and Bluetooth.
Indicator LEDs: Activity, Connection state, Battery.

Dimensions
Width: 553 mm (21.77 in)
Height: 135 mm (5.31 in)
Depth: 16 mm (0.62 in)
Weight: only 890 g (1.96 lb) - 20% lighter than a 11-inch MacBook Air!

Power consumption
~ 125mW / 25mA

Included in packages
Xkey Air (37 keys)
CME Xkey Air 37 (Bluetooth) Quickstart Guide.
Micro USB cable.

Notes: The MBase11 can do only one thing, but it does it right, and it does this even better than in the past.

The MBase11 is the logical follower of the MBase01 and offers even better performance, more versatility and an even phatter sound. It generates analog bass drums, from extremely powerful to soft and covers the whole range from 909-style to 808-fashioned. And also, the LFO has 8 different waveforms including true sine that can be used to create very different envelopes. The resulting sounds are not simply kicks, this turns out to be a bass drum synthesizer.

The MBase11 has a compression parameter to vary the thickness of decaying sound. It offers a variable gate time to to create very different sounding attacks. It also has a metalise parameter to have hundreds of variations on the attack noise.

For more intuitive editing, JoMox have added an analog potentiometer that works alternatively to the parameter editing when scrolling the data wheel is too hard.

The MBase11 purposefully sounds a bit different to the XBASE 999/888, making it a great sounding expansion for our other drum products and other analog percussion.

The kick sets in very precisely and the attack sounds very snappy at all kinds of sound variations.

The MBase11 can also be used as a real bass with some limitations. If decay is cranked up it is long enough for tones and the pitch can be played on the keyboard in semitones over three octaves.

The kick drum can be triggered by an external analog trigger input. This is especially useful for live drummers who want to thicken up their live drum kit. The trigger input works with regular piezo pickups or audio signals.

Last but not least: one of the most convincing arguments for the MBase11 is the price: This is an inexpensive tool that helps you to create great kick sounds, without the time-consuming searching associated with mostly not satisfying samples. You save time and energy while reaching the sound quality you always imagined.

Tweak the sound you need. Everything is real.

Notes: One of the hardest in the game. Dedicated kick drum synth from analogue experts Vermona. Shape your own sounds from scratch. Killer.

Supplier's notes:
The Kick Lancet generator is a handy analogue percussion synthesizer with priority to kick-drum sounds.

The heart of the Kick Lancet's sound structure is an analogue oscillator that produces sine and square waves, which can blend seamlessly from one to the other. 2 independent envelope generators with a decay/release phase can modulate the oscillator's frequency and the VCA. Additionally the VCO pitch can be modulated by the fast LFO (3Hz to 3 kHz, triangle). Noise and a pulse signal can be added in the mixer section. Vermona have a balls-controller for making it really big.

The Kick Lancet can be triggered by MIDI but beside that there are 3 different trigger inputs. A gate trigger, which impulse can trigger the Kick Lancet in normal way with additional accent or completely dynamical depending on the incoming voltage, a simply short current trigger (i.e. momentary foot switch) and an audio input, which offers the possibility to trigger the Kick Lancet by an audio signal statically or dynamically. Drum pads can also be connected here.

Notes: Reloop's compact Serato controller gives you two decks, compact jog wheels and performance pads in a portable format. Built-in sound card and included Serato DJ Lite software to help you get started instantly.

Supplier's Notes:
Small Size, Huge Possibilities

As lightweight as it is powerful, as compact as it is versatile - the Reloop Ready balances first-rate functionality in a practical design for DJs to perform at their highest level whilst maximizing portability and minimizing space. Its impressive feature set includes dedicated controls for track navigation, loops, effects, filters, EQs, master volume, cue section, key lock, sync, key sync, slip mode, censor, jump to the beginning of the track, and user mode.

Up to 9 Performance Modes with NEW Scratch Bank Support

The highly responsive jog wheels can be used for pitch bending, scratching, and fast searching within a track and the 16 large RGB pads give access to 9 different pad modes: Hot Cue, Auto Loop, Manual Loop, Sampler, Pitch Play, Scratch Bank, Loop Roll, and Beat Grid. With so much functionality packed into such a streamlined controller, the Reloop Ready punches way above its weight class as the premier solution for the home, mobile, and travelling DJs.

Plug-and-Play at Home or Away

With the specific needs of today's DJs in mind, the Reloop Ready was conceived by our world-class artists and developed in close partnership with industry leaders Serato for the smoothest connection and software integration possible - straight out of the box. Whether you're a hobby DJ, advanced DJ or a touring professional, the Reloop Ready provides a one-stop solution, giving DJs all the tools they need to perform - and even preparing incredible performances anytime, anywhere.

Stream Millions of Tracks

Furthermore, Serato's integration with streaming services such as Tidal, Soundcloud Go+, Beatport/Beatsource Streaming gives you access to millions of tracks for instant mixing, cutting and scratching.

Compact Convenience

Not only is the Reloop Ready fully USB bus-powered, it also boasts a full headphones cue section and 3.5mm jack, together with an RCA out port for direct connection to active speakers and sound systems. And for those who are conscious of saving space and even working on DJ sets while travelling, the Reloop Ready's innovative and sturdy design allows the unit to sit comfortably above your laptop keyboard while in use, keeping the overall footprint of your setup to a satisfying minimum.

Additional Connections & Cross Platform Support

For even more versatility, the Reloop Ready is also compatible with Algoriddim's djay Pro apps on iOS and iPadOS and can control smartphones, tablets or computers. Furthermore, when in iOS mode the Reloop Ready can be powered by both, a regular USB power supply or a power bank. So there are many options to make sure you never miss a beat.

HIGHLIGHTS:

High-performance compact controller for Serato
Full feature set: 16 large RGB pads, 9 performance modes incl. new Scratch Bank feature1, 2 FX units
Ideal as a home DJ solution and as a professional portable preparation device

Incl. USB cable, RCA cable, and instruction manual

Weight: 1,14 kg
Dimensions: 325mm (w) x 220mm (d) x 48mm (h)

Some modes require a paid Serato DJ Pro version or Pitch'N'Time Expansion pack

Notes: Seriously potent effects power as usual from EarthQuaker. Octave reverb with clever modulation options and eight different modes, from sub-octave generation to pitch-bent harmonies.

Supplier's Notes:
Unrelenting, radicalized reverb for the modern world; an array of haunting, unearthly delights and ethereal sonic sorcery designed to take you on a deep journey through both time and space. This is your new destiny should you choose to accept it. Welcome to your new Astral Destiny.

The Astral Destiny is a compact and powerful modulated octave reverb pedal that features 8 reverb modes with 8 editable presets, assignable expression control, tails for natural reverb decay when the effect is bypassed and a super cool stretch feature that doubles the length of the reverb while adding an adjustable pitch bending effect.

Astral Destiny features a completely analog dry signal path, totally digital delay path, buffered bypass with and two different bypass states- Tails or Full Bypass. Tails Mode, which the is the pedal's stock setting, allows the reverb to naturally decay after the effect is bypassed, slowly letting you drift back from your ethereal dream state into the waking world. Full Bypass, on the other hand, will cut the reverb effect completely when the effect is bypassed and instantly throw you back into cold clutches of reality.

Let your fate spin out of control by pressing the Stretch footswitch doubles the length of the reverb effect while adding a temporary change in pitch. While a short tap will immediately change the pitch, holding the Stretch footswitch depressed gives you a temporary pitch bending effect with the speed of the of the pitch bending effect created by holding the Stretch footswitch easily adjusted by turning the Length knob.

While the Astral Destiny offers two different modes of operation, it ships in Live Mode, where each control will operate manually, laying out your fate for you, clearly visible. Preset Mode in contrast lets you chose from one of the 8 unearthly, ethereal factory preset reverb fates, 1 for each reverb mode, the Astral Destiny comes with. Each of these can be edited or completely overwritten just like when the ancient Fates plucked or cut the strings of ones destiny. Save settings for Length, Depth, Rate, Tone, Mix as well as EXP assignment and Stretch length and recall them instantly. Any of the Astral Destiny's 8 reverb modes can be used as the basis for each of the 8 presets.

But beware! - There is no undo for preset saving, so make sure you are not overwriting your favorite sound, especially when you are saving presets from Live Mode! - Once the string of your fate is cut, there is no turning back on your destiny. Freely express any aspect of your Astral Destiny - Shipping with the EXP jack mapped to the Depth control, the expression control can also be swiftly assigned to Length, Rate, Tone, or Mix, plus different EXP assignments can be saved in each preset and you can also use Control Voltage with the EXP Jack.

Each Astral Destiny is built one at a time by a team of Los Angeles-based robots and a handful of real life humans in the occupied Erie territory presently known as Akron, Ohio.

Notes: Entry-level controller for NI's Traktor DJ software. Surprisingly feature-packed for such an affordable price. Two channels with integrated mixer and effects, plus RGB pads for hot cues and loops.

Supplier notes:
Whether it's bass-heavy breakdowns, steppy synths, or peak-time rewinds that define your style, the TRAKTOR KONTROL S2 has everything you need to make your mix happen. Craft sets on two decks and get creative with easy-to-use tools like looping, beat syncing, and club-grade effects.

Turn the music you listen to into the sets you play, with a streamlined interface that makes blending tracks a breeze. Plug in, line up a few of your favourite tracks, and get mixing wherever you are. You can leave the beatmatching to TRAKTOR, so you have more time to pick tunes that fit the vibe, experiment with FX, use looping and remix decks, and to define your own sound. Whether you're at a house party, a bar, or the club, you can create mixes made to make you move.

WHAT'S NEW?

The perfect way to really ramp up your mixing, with eight RGB pads on each deck. Cut straight to a hook everybody knows by setting and triggering cue points, or punch in your own edits with samples on a Remix deck.

Upsized, touch-sensitive jog wheels let you cue, scratch, and nudge tracks much more accurately - not to mention perform bigger backspins. They also mean more fun getting hands-on with your music.

A familiar club-standard layout, wherever you go. Browse tracks, adjust beatgrids, use effects and features like Flux Mode, directly on the TRAKTOR KONTROL S2. Everything you need for creative mixes at your fingertips.

Turn up your track transitions with new Mixer FX: Cut bass with a filter instead of EQ for resonant kicks, or get hi-hats galloping with delay. A choice of eight effects and three filters ensures you always have the right tools to hand.

Scale up your set with Steams and loops. Trigger one-shot sounds and samples to inject new energy into your mix.

Notes: The 'Quaid Megaslope' is a five stage function generator or modulator which operates in one of 3 modes; a multistage 'CZ' or 'Juno' style complex envelope, a super flexible LFO and a step sequencer with per step programmable slew or slides.

Each mode produces a varying output voltage moving from point to point across a set number of chained together stages. Each stage features a destination level, an overall rate or time to reach its destination level and a variable slope for the output path to take. As well as direct control, every stage feature voltage control of both level and rate. There are both unipolar and bipolar voltage outputs together with triggers emitted for the end of each stage and the end of a full cycle.

The Quaid Megaslope is designed to be fun, flexible and intuitive to use.

Notes: The WaveSwarm is a waveform animator and all analogue dual channel device.

Each channel simulates up to six VCO's beating in unison with a different beat frequency between each animation. The fixed beat frequencies are generated by twelve onboard LFO's, and the front panel pots control the level of each of the six animators, along with the level of the dry signal to the final mix. In addition to independent channel inputs and outputs it also has an A+B output, which sums the outputs of the two channels, creating an effect similar to twelve VCO's in unison! This is possible because channel B uses slightly different beat frequencies to channel A, they are not identical.

The input waveform can be saw, triangle, sine or wavetable/complex waveforms, in fact most waveforms with the exception of square or PWM waves will give some form of animation.

A soft clip circuit is built in so that at higher signal levels the signal magnitude is limited by rounding the top and bottom of the waveforms, thus slightly softening the sound. There are soft clip LED indicators for both channels.

It can produce huge, fat drones or supersaw type waveforms from a single sawtooth or triangle wave input.

Notes: Tetrapad is a versatile, multi-dimensional, touch-sensitive control surface for Eurorack. Each of its four pads use force sensing resistors to respond to both the vertical position of your finger and its pressure. Four push encoders and a shift function give you even more tactile control over your modular system.

Tetrapad operates in numerous modes - each of which configures the module to perform a specific control task. Through these modes, Tetrapad can emulate a bank of faders; a voltage storage device; a finger drumming surface; a chord generator; an 8-key keyboard; four independent LFOs; or an 8-switch panel. The chosen mode determines what type of signal (CV, note, trigger, gate, etc.) is sent from each of Tetrapad's eight independent outputs, while its multitude of multi-coloured LEDs keep you informed of exactly what's happening within each mode.

Tetrapad automatically remembers how you've configured each of its modes and retains these settings when powered off. By default, Tetrapad automatically saves these settings every minute, or whenever you change modes. This makes Tetrapad ideal for live performance, since you know it will always power up with your configurations intact.

Notes: Steppy is a 4-track programmable gate sequencer with eight internal memory slots, external clocking, numerous tweakable parameters, and a performance-first design aesthetic.

Each track features numerous independent parameters that govern its playback independently of the other tracks. Specifically:

- Each track has its own length, which can range from 1-step to 64-steps, allowing for polyrhythms, fills, or constantly evolving gate interactions between tracks.
- Each track has its own gate length, which ranges from very short to very long, with tied gates possible at the extreme setting.
- Each track has its own clock divider, allowing patterns to play out over completely different periods of time.
- Each track has its own swing setting, which offsets the timing of every other step.
- Each track has its own delay setting, which offsets the timing of every step.
- Each track has its own probability control, which sets the likelihood that each programmed gate will fire when called upon by the pattern.
- Each track can be shifted (or 'rotated') forward or backward by a number of steps. So if you've created a pattern that 'feels' like it has its downbeat on step 3, you can shift that pattern two steps to the left, so that the downbeat sits on step 1.

Tracks can be programmed by entering active steps on the grid or tapped in live as the sequence is moving. Tracks can be selected and modified in real time as the sequence plays. A select button allows you to directly access each track (and each page of 16 steps within that track) directly through Steppy's intuitive multifunction buttons array.

Tracks can be individually muted and unmuted, and a special performance mode (called "Loopy") enables you to touch any two gate steps and instantly create a performance that loops between those steps.

Track patterns can be cleared without clearing its playback parameters, and all track patterns (along with their individual playback and performance parameters) can be saved as a preset to one of eight internal memory slots.

Notes: Transform your guitar into a classic organ from the '60s and beyond!

With 9 presets that were finely tuned to emulate the most legendary organs from the '60s and beyond, the EHX B9 Organ Machine will transform your guitar or keyboard. Control the instrument's signature percussive click and sweet modulation. Blend your dry signal to create lush layers. Enough tonewheel and combo organ inspiration to light your fire and cook up some green onions!

Transform the tone of a guitar or keyboard into that of a convincing full body, electric organ
9 presets that were finely tuned to emulate some of the most popular and classic electric organ tones
Control over percussive attack level, modulation speed, organ and dry volume
Rugged and easy to use
Power adapter included

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 4.75 x 4 x 2.25
Current Draw: 100mA
Year Released: 2014

Notes: Two independent Contour Envelope Generators in a single 12hp wide Eurorack module. These are very accurate replicas of the Model D contour generators, with identical circuitry and component values running on the correct +9.3V and -10v supply voltages of the original; so they exactly replicate the original envelope response along with all of it eccentricities. Extra features include manual trigger buttons and envelope status LED's.

The contour generators played a larger part in the sound of the Model D than many people realise. There are two factors that make them unique, firstly the exponential slope when is used in conjunction with the (near) linear slope of the original VCA which is responsible for the famous Model D "punch". Secondly, the re-trigger behaviour is quite unique, multiple retriggering increases the output level so that either the volume increases incrementally, or the filter opens incrementally with each extra key press.

AJH Synth have added independent Decay switches for each individual Contour Generator rather than the shared switch on the original synthesiser, these switches change the Contour response from AD (switch up) to ADSD mode (switch down).

Notes: Pressure Points is a controller module, an analog sequencer that is played by hand. Touching the gold plated copper wires (aka Touch Plates), you become part of the circuit, generating a gate signal (Gate OUT), a control signal proportional to the amount of pressure applied (Press OUT) and the 3 Tuned Voltages for the activated Stage.

Notes: Four channel voltage controlled Clock Divider/Multiplier with master Tap Tempo. Each channel can be synced to the tap tempo, to the channel above, or to an external clock. Each channel also has a reset jack.

With a Tap Tempo button and five sync'ed clock outputs, the QCD is a versatile head-of-the-chain "Master" clock module, and/or a complex rhythmic pattern generator.

Notes: Consider this your clean slate. The Canvas Stereo is a Direct Box/LIne Isolator designed to remove any resistance between you and your audience by giving a pristine, sonic foundation to build your stereo masterpiece upon. From houses of worship to the dive bar downtown, Canvas Stereo is built to be the performance tool that goes wherever you are making your music.

Canvas Stereo is a Passive Line Isolator (LI) and Direct Injection (DI) device that converts your unbalanced signals into balanced signals for interfacing properly with your recording interface or mixer at front-of-house. If you're using an amp-in-a-box (DSP Guitar Rig), like our ACS1, keyboards, or any other instrument utilizing both left and right outputs, then the Canvas Stereo is your new bridge to the front-of-house. The Canvas Series DIs pack everything you need from a DI/LI into a standard pedal-sized enclosure designed to look great right on top of your board.

Direct Injection:
Use DI mode when connecting an unbalanced, high impedance source (Electric Guitar, Bass Guitar, etc). The signal will be reduced by -20dB (-35dB with pad engaged) and converted to a balanced signal via the transformer connected to the XLR output. Use the gain on your mixer or preamp to bring up to line level.

Line Isolator:
Use the LI when needing to connect your unbalanced, low impedance source (Amp + Cab Sim like the ACS1, keys, etc.). The signals will remain full volume and be converted to balanced signals via the transformer connected to the XLR output. Less preamp gain will be required in LI.

DI or LI?
When deciding between DI or LI, check with the manufacturer of your gear to find the output impedance of the device you are wanting to interface. For a general guide:High Impedance = anything above 1k = Use DILow Impedance = less than 1k = Use LI .

Troubleshooting:
This is a passive device, so you will not damage anything if connected improperly, but it could affect the signal level and frequency response if not connected properly. This is an easy thing to test since the LI/DI switch is built into Canvas. If you lose high-frequency information when using LI mode, then you should probably be in DI mode.

Notes: Introduce some precisely controlled chaos to your patches with the Orbit 3, based on the orbit of a particle through 3D space. Audio and low-frequency modes allow it to work as an oscillator or LFO.

Supplier's Notes:
In everyday usage, 'chaos' means 'disorder, 'randomness'. In mathematics however, chaos has a very specific meaning. Chaos theory deals with systems exhibiting highly irregular behaviour, seemingly random yet completely deterministic.

Applying this to the world of modular synths opens up a whole new world of modulation opportunities, introducing a natural irregularity to otherwise purely 'mechanical' music, yet with much more control and repeatability than just simple randomness.

In chaos theory, the combination of all possible oscillations at a specific set of parameters is known as the 'attractor'. Orbit 3 incorporates a modified electronic analogue of the classic double-scroll attractor. Since it contains some (bi)stable regions in addition to chaotic ones, this type is known as a 'strange' attractor.

The voltages at each of the module's outputs can be thought to describe the orbit of a particle through 3D space around two equilibrium points. The positions of these points, as well as the distribution of the orbits and rate of movement can all be adjusted under manual or voltage control.

Not just limited to low frequency modulation use, Orbit 3 can operate in the audio frequency domain as well, yielding a variety of waveforms from its three complementary output pairs. These span a wide range, from near-sine waves to white noise. The addition of temperature compensation and calibrated pitch tracking makes for an unconventional and lively, yet also accurate audio oscillator.

And when you need a break from all that musical chaos, simply connecting any pair of outputs to the XY inputs of an oscilloscope will surely not disappoint!

10 HP
+12: 70 mA, -12: 65 mA

Review: There are various eye watering stats about the many, many million copies of this album that have been pressed and sold. For each one sold there is almost as many different versions of it, too, if you look on Discogs. But all the hype and huff aside, there is a reason it is one of jazz's most famous records. The sultry modal moods, the masterfully melancholic trumpet sounds Davis conjures and the noir, late night vibe are all perfectly realised and universally understood. Without it, music at large, let alone jazz, would sound very different.

Notes: The E1 from Pro-Ject Audio Systems is the first E-Line turntable, aiming to deliver a great sound experience on a limited budget, hand made in Europe. It doesn't matter if you are a beginner, returnee or experienced vinyl fan. The E1 won't disappoint you! Our Plug & Play design with pre-adjusted tracking force and anti skating by our experienced technicians in the factory provides you the best settings for your turntable. Just lean back and enjoy your favourite records. The new E1 is available in three different versions to fit everyone's needs. All three models are equipped with an 33/45 RPM electronic speed switch.

The stylish CNC-machined composite fibre plinth, available in high gloss black, high gloss white or walnut finish, is carefully manufactured to ensure there are no hollow spaces inside. The lightweight and low friction 8,6" aluminium tonearm is optimized for the high quality Ortofon OM5e cartridge and will bring out its maximum potential. The new ABS Polymer main platter is strengthened with purpose-designed ridges in order to create an ideal, anti- resonant platform for your vinyl. To protect your E1 from dust, you will also find an elegant acrylic dustcover with adjustable hinges in the box. Boasting premium materials, stylish aesthetics and a rich, lively sound, the extensive development process has ensured that there has been no compromise in the sound performance despite such an affordable price.

In the box:

E1 with Ortofon OM5e cartridge
Directly soldered RCA Phono Cable (1,23m)
Felt mat
Dust cover
Adapter for 7" singles
Power supply

Technical Specs

Speed: 33, 45
Drive Principle: Belt Drive
Speed Variance: 33: +/-0.7%; 45: +/-0.6%
Wow & Flutter: 33: +/-0.25%; 45: +/-0.23%
Platter: Strengthened ABS Polymer
Signal to noise: 65dB
Tonearm: 8.6" Aluminium Tube
Effective arm length: 8.6" (218.5mm)
Overhang: 22.0mm
Effective Tonearm Mass: 7g
Included Accessories: 15V DC / 0.8A power supply, dust cover, 7" single adapter
Power Supply: 15V 0.8a
Power Consumption: 4.5W
Dimensions (W x H x D): 420 x 112 x 330
Weight: 3.5kg net

Notes: Bags of character courtesy of 'tone wizard' Andy Timmons (Danger Danger). Dual delay lines work in tandem, creating stereo effects from vintage tape delay to infinite hold.

Supplier's Notes:
Andy Timmons' mysterious sounding "Halo" effect is a modulated dual echo sound that has long been kept a secret by the tone wizard himself. Andy spent decades combining and crafting the sounds you can now get from the HALO. Notes from the HALO dance rhythmically, almost creating a reverb diffusion. Those notes are held together with tape-style effects like modulation, saturation and compression. The results are stunning!

The pedal comes loaded with his signature delay tone and you can program your own sounds and save them as presets. Easily bounce between Side A and B on the fly, essentially giving you two delay pedals in one. In addition to Andy's signature "Halo" sound, there are numerous other rhythmic delays including: quarter note, dotted 8th, stereo rack mount analogue delay, and a vintage multi-head tape echo. Stunning stereo and pristine sound quality are further enhanced with controls for saturation, tone, and shelving filters that give you the ultimate delay pedal.

Think of HALO as two delay pedals that work in tandem, letting you switch between your main delay (side A) and an alternative (side B). With up to 1500 ms of available delay, set sides A and B for different delay times, then simply foot switch between the two. Keeley's Smart Stomp System allows you to press and hold either stomp switch to engage tap tempo mode. Press and hold the alternate stomp switch for infinite repeat/hold.

Each Preset bank gives you 2 delays settings for a total of 8 user-storable effects. Use the Rhythm control to select between different echoes like HALO, Analog, Tape, Quarter and Dotted Eighth. HALO's Saturate control adds tape compression texture to your tone. The Tone and High Pass Filter controls your overall delay shape and mix. The Rhythm Mode selector delivers 5 delay types, including Andy's unique "Halo" sound. Set the Time and Feedback controls low, and you can open up a world of ambient chorus and flanger effects.

Run the HALO in stereo for incredible true-stereo imaging or save your favourite combination of settings as a preset and the HALO becomes an incredibly compact multi-effect workstation!

Notes: Looking Glass is an 5 x 5 active patchbay/matrix mixer/switcher for both audio and control voltages. It features:

5 inputs (1 through to 5), each with attenuators
5 inverted outputs (A through to E) which are 180o out of phase with the inputs
5 normal outputs (A through to E) which are in phase with the inputs
A switch matrix of 25 push on/push off switches and LED status indicators
Any of the 5 inputs can be patched to any of the 5 outputs simply by pressing the corresponding switches. A patched signal will appear at both normal and inverted outputs simultaneously.

A single input can be patched to a single output. A single input can be patched to multiple outputs. Multiple inputs can be patched to a single output. Multiple inputs can be patched to multiple outputs.

The attenuators allow you to reduce the volume of an incoming signal. If you add many inputs to one output you will of course cause clipping (which may or may not be desirable!), the attenuators are your on-board way around this.

Specifications:

12V draw: 30mA
5V draw: 0mA
-12V draw: 31mA
Depth: 35mm
Width: 18HP

Notes: Updated take on Nomono's mini synth. Virtual analogue and granular synthesis with effects, sequencer, looping and performance functions. An affordable but flexible instrument.

Supplier's Notes:
The Qun mk2 is a powerful and unique pocket synthesizer with sequencer and looper.

Normally, cheap synthesizers don't have full flexibility because of hardware limitations.

Nunomo had in mind a small synth that has full flexibility of the real synth with an affordable price tag- and Qun mk1 was the synth.

The Mk2 receives a big improvement from the mk1 by adding LED buttons and external processor for UI processing- SD card support is added.

Once you get used to it, it will be so powerful and it will provide tons of flexibility. It is a real synth, not a preset machine.

If you are looking for a pocket music sketch tool, this is it.

Connectivity: Standard MIDI (TRS Type A, comes with the synth), UART MIDI(Supports MAC OS X and Windows through the Nunomo SerialMIDI https://github.com/raspy135/serialmidi .

Analogue Modelling engine

The analogue modelling engine is made from scratch.
All analogue modelling engine parameters can be configured through MIDI.
2 Oscillators, 2 voices. It can be used as Quad tone (4 voices) or Dual Mono.
Flexible MOD (CV) routing. The signal routing is very flexible, close to modular synthesizer experience. You can route signals as normal, or totally radical.
AUX input can be used for external audio signal, or for modulation.
4 Envelope Generators
FM (4 Operators x 2)
1 LFO, rate can be controlled by MIDI notes
1 Organic sounding VCF
2/4 Poles, Low-pass, Band-pass, High-pass, Notch)
Keysync
1 Effect (Delay, Chorus, Flanger)
MIDI clock sync and beat clock sync
Wavefolding.
Granular synthesis
Oscillators can be used as a granular synthesis engine.
Player / Sequencer

Player (Piano mode)
Mind inspiring 64 step sequencer will generate beats for you
Note On/Off/Double/Triple
Transpose / Note width(Length)
Randomness control
Pattern shuffler
Scale quantize
Arpeggiate steps
Looper
Looper can record the sound up to 24 sec per recording, synchronized with the sequencer.

3 tracks
5 Scenes (3x5 = 15 recordings per session)
Play / Rec / Overdub

Preset bucket
Preset bucket is made for quick preset recall
It has 8 bucket per session, each bucket has 8 presets and 64 sequencer pattern
Mixer
3 tracks, stereo panning
Mute buttons
Extra processing mode allows to use the sound engine as a stereo effector.
Integrated compressor
SD card
Saving recording sessions
Saving preset data with sequencer patterns
All recorded data is saved to SD card, you can import the data to your DAW
You can import WAV files to Looper granular
Firmware update via SD card
For the completed manual and other resources, please visit https://github.com/raspy135/Qun-mk2 .

Notes: Hue is an audio colour processing effect, in 6HP eurorack format. Hue is comprised of a chain of 5 effects (Drive, Filter, Tape Saturation, LoFi, Compressor). Each effect imparts a particular coloration, tone, distortion, and/or texture to the source audio. With Hue, Drums bang with more intensity & melodies morph into lush LoFi tones.

Hue's goal is to simply colour your sound. The initial concept was born of a debate about the techniques and processes used to make drum machines sound big, bold, and delicious. The sounds that tug at the hearts of boombap, LoFi, and subsequently modbap, enthusiasts are those that have great texture, lush degradation, soft distortion, and big bold strokes of colour. The classic beloved drum machines were often processed with outboard gear, recorded to tape, pressed to vinyl, played in big booming systems, sampled, and resampled and on and on. Ultimately, those are the sounds that become nostalgic and reminiscent of all that we love about classic LoFi boombap production. Hue is Modbap's attempt at bringing that vibe into eurorack with a cute little 6hp package.

The effects chain audio signal path is as follows; Drive, Filter, Tape Saturation, LoFi, Compressor. The panel layout allows for the DJ style filter knob to sit in first position for ease of tweaking. Drive boosts and lightly distorts the signal, while shift+Drive adjusts the Drive tone. The Filter is a low pass filter to the left and a high pass filter to the right. Tape effect is intended to impart cassette tape saturation, while shift+Tape adjusts the intensity. LoFi adjusts bit depth, while shift+LoFi adjusts sample rate. Lastly, the one knob compressor mini pot serves as the final glue in the signal path that brings it all together.CV inputs for Drive, Filter, Tape Saturation, and LoFi opens loads of creative possibilities. Hue is a textural beast when creative modulation is thrown at it.

Hue puts the power to shape and transform your sound at your fingertips. It's great for beefing up drums and equally as magical on melodic content. Hue can be the glue that brings it all together. It also, pairs well with Trinity and Osiris. All in all, Hue exemplifies the tagline "Made for eurorack, dope enough for boombap!"

Tech Specs

Width: 6HP
Depth: 28mm
Power: 50mA +12V, 50mA -12V

Features
5 effects (Drive, Filter, Tape Saturation, LoFi, Compressor.)
4 CV inputs for modulating the effects
Mono in and mono out
6HP

Notes: Crystal-clear clock-synced delay for loop up to 90 seconds, echoes, sound-on-sound, Karplus-Strong etc.

Features:
Loop or echo time is synchronized to a clock
87 seconds of delay/loop time maximum
48kHz/24-bit sampling rate, loop recorded at 16-bit (24-bit optional)
Extremely quiet, low noise and low jitter design
Tap tempo button and clock Ping input set the basis for one "beat"
Delay/loop time set as a number of musical beats (or fractions of beats) using the Time knob, switch, and CV jack
Sample-accurate clock output for perfect synchronization
Loop clock outputs for each channel
Time switches change range of Time knob from 1/8th notes up to 32 bars
Digital feedback, up to 110%
Delay Feed control, independent of dry/wet signal mix
Infinite Hold mode disables recording input and fixes regeneration at exactly 100%
Reverse mode plays memory contents backwards
With an infinite loop locked, knobs or CV can "window" around memory, by shifting the loop
Trigger inputs for toggling Infinite Hold and Reverse
Send and Return for applying effects to feedback with external modules
CV jacks to control Time, Level, Feedback and Dry/Wet Mix
16HP Eurorack module

Specs:
48kHz, 24-bit low-noise hi-fidelity
Up to 90 seconds of loop time
16HP
+12V: 110mA
-12V: 45mA

Included with the Looping Delay:
16-to-16 pin power cable
4 x M3 Knurlie screws

Notes: Great value from 4ms's twist on the Stereo Triggered Sampler module, this time capable of playing and manipulating stereo or mono WAV files from an SD card.

Supplier's Notes:
The Sampler is a variation of the Stereo Triggered Sampler.

Record, play and loop stereo .wav files with an SD Card. Includes the same 2022 Sampler Pack from the Stereo Triggered Sampler.

Features:

The Sampler plays stereo or mono .wav files from an SD Card. Samples are arranged into banks by placing .wav files into folders (each folder is a bank). A maximum of 10 samples can be loaded in a bank. There is a maximum of 60 banks (600 samples maximum total).
Sample files are limited to 4GB each, which is over 6 hours at 44k/16b/stereo.

Hundreds of samples included on microSD card
Extremely quiet, low noise and low jitter design
Stereo or Mono output

A knob and CV jack selects the Sample to play, and the Start Position knob and CV jack control where in the sample playback will begin. The Length knob and CV jack determine how much of the sample is played back: from tiny grains, to percussive hits, to longer loops... or just the entire file.

Pressing Play or firing a trigger into the Play Trig jack will play the sample. Holding the Play button down for a second will toggle looping.

There's also a Reverse button and jack for backwards playback, and an End Out jack for synchronizing loops, or cascading sample playback with other events.

To record samples, hold Play and Reverse for two seconds. Press Play again or fire a trigger into the Play/Rec Trig jack to start and stop recording. Each recording will create a new stereo 48kHz 24bit .wav file in the current bank's folder. Recordings can be as long as your card has the capacity for: a 256GB card is 18 days of continuous recording (432.9 hours). Audio data is split into maximum 4GB wav files on the microSD card.

Play button/trigger jack: Tapping the button or receiving a trigger starts/re-starts the sample
Sample CV/knob: select which sample within the channel's bank
Pitch CV and Pitch knob: playback pitch (-10 to +4 octave range)
Start Pos CV/knob: position in the sample to begin playback (loop start point)
Length CV/knob: playback time (loop end point)
Length knob at max: entire file is played
Length knob 50%-99%: 200ms - 5s of the sample is played (beginning at the Start Position)
Length knob <50%: Percussive decay envelope is applied to the playback (attack-only envelope if playing Reverse)
Length <1%: Tiny grains are played (can be used to sweep through sample file data manually)
Reverse button/jack: toggles forward/backwards
Bank button: selects channel's bank
Reverse + Start Pos button/knob combo allows for setting volume of playback
Maximum file size for playback: 4GB per file (6.7 hours per file at 44.1kHz/16b/stereo)
microSD Card is hot-swappable when Busy light is off: no power-down required to change cards.
Samples that are pre-loaded into memory can continue playing while card is swapped.

File Organization:

Using a computer, the intuitive automatic bank loading features make dragging and dropping your entire sample library a snap. No files need to be renamed. Just create folders and put up to 10 samples in each. If you want a folder to be associated with a particular colour of the Bank button, name the folder a colour name (such as "Blue - Loops").

Ships with a high-speed 16GB microSD card, loaded with hundreds of samples created for 4ms, from musicians such as Richard Devine, Wobbly, Moor Mother, Robert Aiki Aubrey Lowe, Joseph Pailo, Russell E.L. Butler, Hugo Paris & Marc Kate, Paul Barker, Baseck, Animal Collective, Cristian Vogel, Jay E, Marcus Fischer, Chris Carter, Daedelus, Nero Bellum, Anna Sitko, Thomas Fang, Bogdan Raczynski, and more (Sample List)

Intuitive bank/colour organization system; no need to rename your wav files
Record new samples directly to a bank with the Record Input jacks...
... or drag your folders of sound files onto the microSD card, and each folder will become a bank.
Folders starting with a colour name will be loaded into that colour bank
Example "Blue - Frooty Loops" will load into the Blue bank
Sub-folders are ignored, only folders in the root directory are scanned for wav files
Works best with UHS Speed Class 3 cards with |3| symbol printed on the card

Specs:

Electrical and Mechanical Specifications:
Module Size:
16 HP Eurorack format module
10-pin Eurorack power header
1.3" (33mm) maximum depth with power cable
Power consumption:
+12V: 135mA
-12V: 41mA
+5V rail: not used
Connect red stripe of power cable towards the bottom of the module, which is marked with a white stripe and the words -12V and POWER
Audio Inputs:
20Hz to 10kHz (+/-0.1dB); -6dB rolloff @ 20kHz
21V peak-to-peak maximum before clipping
Audio Outputs:
0Hz (DC) to 22kHz with maximum -1.8dB difference between file data and output
+10.5V to -10.5V maximum output
Trigger inputs:
Latency: 0.7us typical

Included with the Sampler:
16GB micro SD card (class 10)
SD adaptor
10-to-16 pin power cable
M3 Knurlie screws

Notes: Pan and cross fade up to three signals with AJH's versatile Triple Cross. Four different modes allow you to set up the three channels in numerous ways, for both audio and CV processing.

Supplier's Notes:
The Tone Science Triple Cross module is a design collaboration between electronic musician/composer Ian Boddy and AJH Synth.

It features three independant cross fader and panner channels, and it can be used with both audio and CV signals. Each of the channels can be configured in one of four different ways:

1) One In, One out Linear VCA

2) Two in, One out crossfader

3) One in, Two out panner,

4) Two in, Two out cross fader & reversing panner combined.

Audio rate modulation can also be used on the CV inputs to create Ring modulation and Cross modulation type sounds. Each channel has a dedicated Fade control, CV input, and CV Level attenuverter. These can be used together to bias incoming CV signals.

The L1 and L2 outputs from channels 1 and 2 are normalised to channel 3's inputs, which also have their own level controls to balance incoming signals. This allows very interesting, complex fading and panning between four different input sources, to either Mono or Stereo outputs..

The Triple Cross is very versatile, yet relatively simple to understand and use. However, as they say "knowledge is power", so do spend a little time reading about how to configure the channels in the four different modes, and how to combine all three channels together to create a super-powerful Four to Two to One cross fader.
Each of the three channels can be configured in four different ways, and all three can be used simultaneously. They do not all have to be in the same mode, so we could for example use channel 1 as a cross fader, channel 2 as a Panner for completely different signals, and channel 3 as a Linear VCA, again for different signals.

Specifications

Effective CV Range for CV-1, CV-2 and CV-3 is 0 to +5V with attenuverter fully clockwise or 0 to -5V with attenuverter fully anticlockwise.
Maximum permissible CV Range for CV-1, CV-2 and CV-3 is -12 to +12V
IN 1A to IN 3B Input levels -5V to +5V, levels up to +/-10V are possible however some clipping may occur.
Module Width: 14hp
Module Depth: 26mm (Including power lead)
Current Usage: 80mA Positive, 72mA Negative

Notes: The EHX Ring Thing ring modulator presents state of the art modulation control allowing the user to explore a new sonic world that is both familiar and inventive. Complex modulations with interactive parameters create any sound your mind can imagine. Articulate pitch shifting, preset tuning, selectable waveforms and external control delivers sound designer mystery, with a Rock and Roll edge.

Multi-wave selection for modulation and Ring Mod
Low pass Filter for Ring Mod and single side band modes
Fine and depth control for frequency select and amount
Tune switch to adjust frequency to your pitch
Upper and lower sideband isolation
High quality whammy style effects with expression pedal
Pitch shifting with pitch modulation and vibrato
Fully programmable
Power adapter included

Specifications:
Circuit: Digital
Bypass: Buffered Bypass
Audio: Stereo
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 190mA
Year Released: 2010

Notes: No compromise on safety and security

When it comes to transporting your valuable equipment, there can be no compromise on safety and security. The Reloop Premium Large Controller Case is the ideal choice for DJs who need a reliable and secure case that can accommodate larger controllers such as the Reloop Mixon 4 /Mixon 8 Pro, Roland DJ-8008, Pioneer DJ DDJ-SX3 / DDJ-800, Denon DJ MC7000.

Built to last

Crafted from durable wood and aluminium with a scratch-resistant black hexagon texture, these cases are built to last. They also feature butterfly locks and angular blind cuts to keep your gear safe and secure during transport. Additionally, the case includes a laptop tray with fasteners and a spring-loaded and recessed carrying handle for easy and comfortable transportation.

Fits large controllers

The Reloop Premium Large Controller Case provides DJs a durable and secure solution for transporting larger controllers, ensuring the safety and protection of valuable equipment.

Premium large controller case

Rugged case for common, larger DJ controllers
Integrated laptop tray with fasteners
Two recessed, spring-loaded transport handles & removable blinds for cables

Technical data

Colour: Black
Internal dimensions: 657(W) x 376(D) x 89(H) mm
External dimensions: 751(W) x 474(D) x 198(H) mm
Weight: 11.3 kg

Notes: Seeking to recreate the sounds of the Klon Centaur overdrive pedal and Dumble guitar amps, the Crazy Tube Unobtanium combines the holy grails of germanium diodes and all-analogue amp-in-a-box tone. Incredible value.

Supplier's Notes:
Introducing the Unobtanium, a rare sonic element born out of legendary tones.

A mythical overdrive meets the tone and feel of two iconic amplifiers. Crazy Tube Circuits have accurately recreated the circuit of the high headroom overdrive with the magic blend of clean and overdriven tones and added extra features for versatility. The amp-in-a-box section uses an all-analogue circuit to capture the essence of two legendary D-style tube amplifiers. From tube-like compressed fat clean to sweet singing overdrive with blooming harmonic overtones. Combine both sides for near infinite smooth sustain and enter sonic bliss while a passive series effects loop gives you the option to connect your beloved pedals between the overdrive and amp section, building your ideal rig

Right side: K-style pedal overdrive circuit including the fabled germanium diodes
Controls: gain, treble (tone), volume, bypass mode and clipping / compression
Wide gain range control: from transparent boost to high headroom overdrive
Treble control is an active circuit to boost or cut treble
Volume knob sets overall output. Huge amount of dB boost available
Toggle switch to select between the original buffer bypass to add clarity and run long cables or
true bypass
Toggle switch to select between stock clipping / compression or enhanced gain and
headroom/output

Left side: D-style Amp in a box overdrive
Controls: gain, emphasis, tone, volume, amplifier voicing toggle
Gain control: from clean boost to sweet singing overdrive
Emphasis control is a pre-drive EQ to control presence and bottom end response
Tone knob controls the amount of post overdrive high end frequencies
Volume knob sets overall output. Match bypassed volume or use as a clean boost or preamp
Toggle switch selects between 2 distinct D-style overdrive circuits
SSS: clean and transparent overdrive with natural organic compression
ODS: higher gain overdrive with enhanced mid frequencies and harmonic overtones
External footswitch input to select amplifier voicing (bypasses on board toggle switch)
Internal trimmers adjust EQ and volume boost of D-style overdrive voicings

Features:

Dual overdrive with independent operation
Two legendary sonic elements combined in one device
Passive series effects loop to connect other pedals between the two sections or use them separately
Runs internally at 18V DC for higher headroom and tube-like performance
Exceptional pick attack response - almost infinite smooth sustain when both sides are combined
Top mounted jacks
Click-less True Bypass design via high quality relay
Power Supply: Use only 9V DC center negative power supply (not included)
Current consumption 83mA
Pebble grey die-cast enclosure with black ink in old school type print
Made in Greece