All genres charts

Notes: The AT-HS6 is a universal 1/2"-mount headshell for 4-pin turntable cartridges. It features an ultra-lightweight (9 g) aluminium die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus placement. The headshell is also equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws.

Notes: The Audio Anatomy Vinyl-Inner Sleeves are an indispensable accessory for any vinyl collector. Made in Germany, the interior consists of an antistatic foil lining (low density polyethylene) and the exterior is of paper. The paper has a die-cut centre hole on both sides and corresponds to the universal size of the 12? record. The Audio Anatomy Vinyl-Inner Sleeves provide easy and efficient protection against dust, fingerprints and moisture, resulting in improved sound quality and increased longevity of your vinyl records. To keep your vinyl records clean, we recommend cleaning them regularly with Audio Anatomy Cleaning Brushes and Audio Anatomy Cleaning Cloths.

- Antistatic foil lining
- Die-cut centre hole on both sides
- Universal size for 12" vinyl records
- Produced in Germany

Notes: The Audio Anatomy Vinyl-Inner Sleeves are an indispensable accessory for any vinyl collector. Made in Germany, the interior consists of an antistatic foil lining (low density polyethylene) and the exterior is of paper. The paper has a die-cut centre hole on both sides and corresponds to the universal size of the 12? record. The Audio Anatomy Vinyl-Inner Sleeves provide easy and efficient protection against dust, fingerprints and moisture, resulting in improved sound quality and increased longevity of your vinyl records. To keep your vinyl records clean, we recommend cleaning them regularly with Audio Anatomy Cleaning Brushes and Audio Anatomy Cleaning Cloths.

- Antistatic foil lining
- Die-cut centre hole on both sides
- Universal size for 12" vinyl records
- Produced in Germany

Notes: The Audio Anatomy Vinyl-Inner Sleeves are an indispensable accessory for any vinyl collector. Made in Germany, the interior consists of an antistatic foil lining (low density polyethylene) and the exterior is of paper. The paper has a die-cut centre hole on both sides and corresponds to the universal size of the 12? record. The Audio Anatomy Vinyl-Inner Sleeves provide easy and efficient protection against dust, fingerprints and moisture, resulting in improved sound quality and increased longevity of your vinyl records. To keep your vinyl records clean, we recommend cleaning them regularly with Audio Anatomy Cleaning Brushes and Audio Anatomy Cleaning Cloths.

- Antistatic foil lining
- Die-cut centre hole on both sides
- Universal size for 12" vinyl records
- Produced in Germany

Notes: The Audio Anatomy Vinyl-Slipmat consists of a 1,5 mm thick cork and nitrile rubber mix. With a diameter of 295 mm the slipmat fits all turntables. The insulating properties of the cork and nitrile rubber mix prevent harmful resonances. In contrast to felt mats, cork additionally avoids electrostatic charging and thus prevents cracking when playing the record.

Notes: The UDG DIGI Headphone Bag is a premium headphone carrying bag made from Ballistic Nylon that is designed to protect headphone, USB drives, SD cards, Ext. hard-drive, mobile phone, cables, business cards, credit cards and accessories in one padded carry bag that includes a handgrip, detachable and adjustable shoulder strap. The UDG DIGI Headphone Bag the one bag a DJ need to carry around today's digital media.

Specifications:

Colour: Black Camo/ Orange Inside
Weight: 0,35 kg / 0.77 lbs
Outer Dimensions (W x H x D): 22.0 x 22.0 x 9.0 cm | 8.7 x 8.7 x 3.5 inch
Inner Dimensions (W x H x D): 21.0 x 21.0 x 8.0 cm | 8.3 x 8.3 x 3.1 inch
Material: Water resistant Ballistic Nylon 1680D
Protection: Foam padded interior

Extras

Detachable and adjustable shoulder strap. Holds USB drives, SD cards, hard drive, mobile phone, cables, business cards, credit cards and accessories

Fits

Most foldable DJ Headphones.

Notes: The Glorious Vinyl Frame Set puts your most beautiful records in an appropriate frame. Often your favourite records' covers are more than just wrapping for the precious black gold as they stand out due to their special design. In order to put this art in the limelight, Glorious has designed the fitting frame. The sturdy plastic construction with glass cover is designed for 12'' covers and is captivating due its simple but stylish looks. Turn your record collection into art with the Vinyl Frame Set.

Notes: The Audio Anatomy Vinyl-Inner Sleeves are an indispensable accessory for any vinyl collector. Made in Germany, the interior consists of an antistatic foil lining (low density polyethylene) and the exterior is of paper. The paper has a die-cut centre hole on both sides and corresponds to the universal size of the 12? record. The Audio Anatomy Vinyl-Inner Sleeves provide easy and efficient protection against dust, fingerprints and moisture, resulting in improved sound quality and increased longevity of your vinyl records. To keep your vinyl records clean, we recommend cleaning them regularly with Audio Anatomy Cleaning Brushes and Audio Anatomy Cleaning Cloths.

- Antistatic foil lining
- Die-cut centre hole on both sides
- Universal size for 12" vinyl records
- Produced in Germany

Notes: Goldring D12GX stylus is designed to fit the current Goldring 1012GX phono cartridge or old model 1010 or 1012, a direct replacement when your stylus is worn - saving the cost of buying a whole new cartridge. Goldring cartridges generally last many hours until the stylus needs replacing. An indication of wear is a "duller" sound.

Simply remove your current stylus by carefully pulling it away from the cartridge and replace it with the replacement.

The Goldring 1012GX record cartridge uses the acclaimed Gyger-2 diamond stylus. This is a fine-line type which gives smooth extended high frequencies, low distortion and reproduces a highly detailed and dynamic sound. Advanced diamond tip polishing ensures excellent tracking ability and reduces record wear. The 1012GX represents outstanding value for money and has become one of Goldring's most popular cartridges.

Replacement stylus: 1012GX - D12GX

Notes: The AT-XP7 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulphide (PPS)/glass fibre body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 6.0 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.

Notes: These premium quality 7" record sleeves have the following superb features:

- Ultra Clear
- Anti-Static
- UV Inhibiting
- Mega Slippy

Notes: Getting the most out of any turntable requires an accurate vertical tracking force setting-and yes, kids, you can easily hear changes as slight as a tenth of a gram. it is small, has a backlit display, is incredibly easy to use.

Accurate and simple to use - that's the essence of a great stylus force gauge, and that's what you get with this. We all know, or certainly we all should know, that dialling in your correct tracking force is absolutely essential for optimal record playback.

If you miss on the heavy side, your sound becomes thick and sluggish. Miss on the light side, and your cartridge is more likely to mis-track and the sound will be light and could damage your valuable records

So, stop messing with those mechanical stylus balances that aren't even accurate. This is one case where digital makes more sense when it comes to fine-tuning your analogue.

Notes: The white card high-gloss finish record sleeve has 2 holes and a spine, it needs no inner sleeve.

Notes: Native Scratch technology features newly-designed Traktor Scratch MK2 timecode for incredible scratch performance and more authentic vinyl feel.

The Native Instruments Traktor Scratch Control Vinyl MK2 is designed for use with Native Instruments Traktor Scratch. It also works with Traktor Scratch Pro. Native Scratch's new MK2 timecode is compatible with all next generation Traktor Scratch products when using the free Traktor 2.1.1 service update.

Notes: Pair of high quality Technics Duplex slipmats.

Notes: Highest quality USB 2.0 flat cable from Oyaide.

These d+ series cables were designed with high-end audio systems in mind and ensure smooth and lossless data transmission in both the software and hardware system structure. The flat cable prevents signal loss by cable bend, and protects the signal from external/internal noise and electro-magnetic waves by combination of TPE outer sheath, double-shielding, and twist-pair structure. Every digital DJ knows the importance of a solid USB connection (without it sound can stall or shut down altogether), and these Oyaide cables deliver top performance all around.

Notes: Custom moulded in the UK to fit the contours of the Rane One DJ Controller. Designed for the Digital DJ, this super-durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for travel. The Rane ONE DJ Controller cover shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Rane One covered.

Length: 68cm
Width: 31.9cm
Height: 5.6cm

Notes: High tech G2 fluid contains:

Surfactants: State of the art detergents dissolve and suspend fingerprints and other oily grime.

Super wetting agent: A specialty chemical that reduces the G2 Fluid's surface tension to reach the bottom of the groove. When you spray G2 Fluid on a record you can see it spread down the grooves.

Emulsifiers: Holds the oils, dirt, mildew and microdust particles in suspension. Then the microfiber fabric cleaning pad wipes and pulls the dirt-filled solution from the record surface.

Laboratory grade, double deionized, carbon filtered & UV treated water: Carrier for the active cleaning ingredients. Eliminates static electric charges on the record's surface on contact.

Designed and handcrafted by GrooveWasher in North Kansas City, MO, USA.

NOTE: Photo showing the G2 Refill Bottle Family has the 8oz, 32oz and 64oz refill bottles. This listing is for the 64oz Refill Bottle only.

Notes: Add a splash of colour to your setup with six colour options.

USB-C 3.2 Gen 2, 10Gbps data rate with up to 100W Power Delivery

Dual ferrite cores help prevent high-frequency noise from outside sources

1.0m/3.2ft length allows for connecting gear while still maintaining full power delivery and data rates

56kO pull-up resistor to protect your devices

Chroma Tie velcro strap included for easy cable management and storage.

DJ Tech Tools have been making great USB data cables for professional performers and artists since 2011. By popular demand, the cable line has been brought to the USB-C universe, adding a much-needed affordable, good looking, and high quality USB 3.2 cable.

Notes: AT-VM95E/H VM95 series Elliptical stereo cartridge on AT-HS6 Headshell - AT-VM95E mounted on AT-HS6BK headshell, The total set weight is 15.5g and Assembled and tested in the Audio-Technica Factory in Fukui-Japan

VM95 series Elliptical stereo cartridge on AT-HS6 Headshell
AT-VM95E mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japan
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VMN95C

AT-VMN95E

AT-VMN95EN

AT-VMN95ML

AT-VMN95SH

AT-VMN95SP

Elliptical Bonded Stylus
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Preassembled With AT-HS6BK Headshell
The AT-VM95E cartridge is fitted onto the 9g aluminiumdie cast body headshell

Cartridge & Stylus
Frequency Response 20 - 22,000 Hz
Channel Separation 20 dB (1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8 to 2.2g (2.0g standard)
Stylus Construction Bonded Round Shank

Notes: Mains Power Leads UK - IEC 10A

UK 3 pin plug to IEC C13 female plug 3 cores mains power lead, suitable for connecting power to general electronic equipment up to 2300W (10A).

Max. current: 10A
Max. power: 2300W

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan

Colour: Cream
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01
Gross Weight (kg): 0.013
Packaged dimensions (HxWxL mm): 20x50x20
Transport dimensions (mm): 50x20x20
Gross Weight (Packaged) (kg) : 0.013

Notes: A new refined model of the HPC-HD25 series, more suitable for the field, is now available from the NEO brand!

Sennheiser's HD25 headphones have been supported by sound creators, music fans, and DJs around the world. Oyaide has developed the "HPC-HD25 V2" headphone re-cable for the HD25 to maximize its potential.

The HPC-HD25 was developed primarily as a cable for portable use, and has gained popularity with its 1.2m length and three colour variations. However, we received many requests from DJs and musicians who love to use the HD25 to create a re-cable for the HD25 with a length more suitable for on-site use.

In response to these requests, we have decided to release the "HPC-HD25 V2 for DJs" under the NEO brand as a new model with a 1.8m cable length designed for easier use in the field, such as DJ play, live performances, and recording.

The cable length is 1.8 m. The cable conductor, which is the key to sound quality, is made of 102 SSC, a precision conductor designed for high sound quality. The HD25 side pins and 3.5 stereo mini plug are gold-plated for improved sound quality and corrosion resistance. The cable conductor and plug are soldered with lead.

Free silver solder SS-47 for high sound quality and environmental friendliness. Reasonably priced. Manufactured in Japan under strict production control.

Compatible (e.g. AT-compatible): SENNHEISER HD25(Former name HD25-1II)/ HD25PLUS / HD25-1 / HD25 ALUMINIUM

Product Specifications

Cable: HPC-26TV2
Centre conductor: 102 SSC(AWG26)
Insulator: fluorocarbon resin (PFA)
Shield: 102 SSC spiral (Black)
Outer sheath: Pb Free PVC
Modular plug (headphone side): Machined brass with gold plating
3.5" Stereo mini plug, brass gold plated

Notes: - Makes scratching easier
- Protects your turntable-motor and the records
- Antistatic
- Diameter approx. 290 mm

Notes: Native Scratch technology features newly-designed Traktor Scratch MK2 timecode for incredible scratch performance and more authentic vinyl feel.

The Native Instruments Traktor Scratch Control Vinyl MK2 is designed for use with Native Instruments Traktor Scratch. It also works with Traktor Scratch Pro. Native Scratch's new MK2 timecode is compatible with all next generation Traktor Scratch products when using the free Traktor 2.1.1 service update.

Notes: Tonar replacement needle/stylus for Shure SS-35-C. Diamond tip.

Notes: AT-VM95E VM95 series Elliptical stereo cartridge - Aluminium cantilever, 4.0mV output voltage, Compatible body with all VM95 Series stylus assemblies and Replacement for AT95E and AT95EX

VM95 series Elliptical stereo cartridge
The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT95E and AT95EX
20 to 22,000Hz frequency response
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VMN95C

AT-VMN95E

AT-VMN95EN

AT-VMN95ML

AT-VMN95SH

AT-VMN95SP

AT-VM9E Series compatibility with the AT-XP Series DJ Cartridges
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.
ATN-XP7

ATN-XP5

ATN-XP3

Elliptical Bonded Stylus
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

No use of nuts
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Cartridge & Stylus
Frequency Response 20 - 22,000 Hz
Channel Separation 20 dB (1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8 to 2.2g (2.0g standard)
Stylus Construction Bonded Round Shank

Notes: Being the same size as the average laptop these will fit perfectly in your backpack, making them super portable and an easy option to have on hand as back up. Offering more control than a 7" but still being lighter than a 12" these make a welcome addition to our standard colour range.

Serato control vinyl features our re-mastered Serato NoiseMap Control Tone that is 6db louder than earlier pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market.

Notes: Custom moulded in the UK to fit the contours of the Native Instruments Kontrol S4 MK3 DJ Controller. Designed for the Digital DJ, our super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling DJ. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your S4 MK3 covered.

Notes: Pioneer DJ is undoubtedly one of the leading companies when it comes to creating DJ equipment. With a plethora of DJ controllers under their belt, they're always pushing forward with inventive products for professional DJs and beginners.

The Pioneer DJ DDJ-REV7 is undoubtedly one of the most outstanding pieces in the modern DJ market, even winning the Reddot 'Best of the Best' 2022 award. The layout of the unit essentially emulates a combination of a professional DJM-S mixer + PLX turntable setup.

Investing in such a high-end piece of kit doesn't come cheap and in our eyes, protecting our assets is essential.

Additionally, with the inclusion of the 3.5-inch LCD screens (and it being a major component of the unit) there is always a risk of it getting damaged and essentially rendering the unit useless.

Because of this, Decksaver have designed and custom-moulded a Decksaver cover right here in the UK to perfectly fit the contours of this exciting unit.

Decksaver have gone through years of research and development to create the perfect covers to protect your DJ and music gear. The super durable polycarbonate shell features extreme durability and offers the highest degree of protection.

With this Decksaver cover, you will never have to worry about your Pioneer DJ DDJ-REV1 getting damaged anytime soon!

Dimensions

Weight: 1.3kg
Length: 73.8cm
Width: 36.6cm
Height: 4.4cm

Material: Smoked clear polycarbonate.

Notes: This new line of performance vinyl features a re-mastered Serato NoiseMap Control Tone that is 6db louder than existing pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market. The new Performance Series pressings are packaged as a double set and feature a wide range of new colours.

Vinyl is a strange old girl. The manufacturing process - one part sweat, one part maths and one part magic, is not an exact science. While every record pressed is a high quality product and will perform flawlessly, there can be some variation in the colour throughout a run. Every record is unique.

*** PLEASE NOTE: AS WITH ALL COLOURED VINYL, THERE MAY BE SLIGHT TRACES OF OTHER COLOURS WITHIN THE VINYL. THIS IS NORMAL AND DOES NOT MEAN THE VINYL IS DEFECTIVE. IT DOES NOT ADVERSELY AFFECT THE PRESSING IN ANY WAY AND RETURNS OF THIS NATURE CANNOT BE ACCEPTED ***

Notes: Future-proof your Pioneer DJM-V10! Designed and engineered in the UK specifically for the flagship DJM-V10 six-channel mixer, but also fits the DJM-V10-LF version too. Manufactured from super durable polycarbonate, a tough transparent plastic with hard-wearing qualities. An essential investment to protect this elite-level DJ mixer. Each Decksaver cover is rigorously tested before it carries our name. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables.

Weight: 1.2kg
Length: 46cm
Width: 44.4cm
Height: 4.5cm

Notes: Represent Serato with these fresh new 12" discs in easy-to-accessorize monochromatic color scheme, reversible goodness.

Notes: During the past 20 years the quality of record players and vinyl records have improved dramatically. Acoustic feedback is one of the big problems when playing records. The cause is the sound that has just been produced by the speakers which comes back to the record player and cause it to vibrate. The problems is that there is a very slight time difference between the reproduced sound and the sound that is fed back onto the record player. This results in a big loss of detail and clarity and makes the sound "muddy". So every effort has to be done to isolate the record player from its surroundings as well as to isolate the record from the record player.

In order to reduce acoustic feedback from the surroundings back to the record and the cartridge a lot of effort has gone into developing turntable mats that make the reproduced sound crystal clear with great separation and detail. This has been done by experimenting with various materials which absorb unwanted vibrations which were not present in the original recording. Now many people are trying to combine these different materials as a sandwich at the same time in order to reach better results. Now Tonar offers you this opportunity to experiment yourself but at modest pricing.

In order to enhance the better contact between the record and the mat, the center part - with the dimensions of the label have been recessed to accommodate the thicker label part.

- Diameter 295 mm.
- Thickness 3 mm.

Notes: It's a hard knock life for scratch and battle mixers. As they are used with fierce intensity, protection for when they're sat idle or during transportation is a must. Designed in the UK specifically for the DJM-S7 and manufactured from super durable polycarbonate, a tough transparent plastic with hard-wearing qualities. Each Decksaver cover is rigorously tested before it carries the Decksaver name. The Pioneer DJ DJM-S7 DJ Mixer cover hields faders and controls from dust, liquid and accidental impact whilst accommodating cables.

Length: 38.3cm
Width: 27.1cm
Height: 3.3cm
Material: Smoked polycarbonate

Notes: Designed and engineered specifically for the Rane Seventy-Two mixer. Manufactured from super durable polycarbonate, a tough transparent plastic with hard-wearing qualities. An essential investment for this elite-level mixer, shields faders and controls from dust, liquid and accidental impact whilst accommodating cables.

Notes: High quality audio leads for exceptional sound quality and reliability. Twinned high grade cable comprises 2 insulated pure copper cores and global shielding. The durable PVC sheath has a soft texture and is reinforced with cotton cord to avoid tangling. Terminated at one end with a 3.5mm stereo (TRS) jack and at the other end with 2 x RCA phono connectors.

Notes: Numark's take on the classic scratch mixer formula ticks all the boxes: two channels each with three-band EQ, plus perfectly spaced channel faders and crossfader for cutting and scratching. Simple but effective.

Supplier's Notes:
Pure professional power.

M2 is a two-channel DJ scratch mixer with all the essentials to hit the stage in Numark style.

Switchable phono/line inputs for turntables, CD players, and other line sources make M2 a superb choice for any DJ setting from weddings to clubs, parties to practice setups. A mic input with dedicated EQ and gain, and a headphone output with crossfader-style cueing complete the plentifully featured package.

Three-band EQ on each channel plus crossfader-reverse and slope controls give you all the tools you need to drive your audience from behind the wheels of steel. M2 is the perfect mixer for any scratch DJ.

Packaged Dimensions: 14.6" x 13.4" x 6.7"

Packaged Weight: 8.8 lbs.

Product Dimensions: 11.4" x 9.5" x 3.6"

Notes: A handy, compact USB lamp with touch control, 3 brightness settings and a flexible goose-neck stem for ideal positioning. The USB connection makes it perfect to add extra light for home or travel.

Notes: The Tonar Plastigoat is a high quality record brush with two rows of ultra-soft real natural goat hair. A perfect brush to use for wet cleaning of your vinyl records. The naturally anti-static bristles prevent static build-up and the steady handle provides perfect grip while cleaning your record collection.

Notes: Woodgoat, natural goat's hair, record brush. MK2 of the Woodgoat brush.

Notes: Audio lead with professinal low-noise cable and high quality connectors.

The durable PVC sheath has a soft texture to avoid knotting. Terminated at one end with 2 x RCA phono plugs and at the other end with 2 x male XLR connectors.

Notes: Everything you need in a cartridge, nothing you don't.

Head shell not included.

Adjustable cartridge which will fit in a traditional headshell mount

Replaceable diamond tip

Notes: Right angle (6.3mm) stereo jack plug to (6.3mm) stereo jack socket adapter plug.

Notes: Polylined White Paper Record Sleeves for 7" records (Pack of 10).

Notes: All new exciting styles and designs created for 2021 in collaboration with Magma, Technics have released 20 new slipmats to suit your style and aesthetic.

Perfect for all types of turntables and vinyl players, the soft felt design works to eliminate static charge expelling from your vinyl records. Protecting your turnable as well as your record, the slipmat ensures both your turntable and record stay in working order and helps to reduce scratches.

Suited to all styles, these slipmats from Technics are functional as well as visually pleasing; working well with scratch DJs, as well as audiophiles these slipmats have you covered and looking good.

Notes: Updated version of Numark's tiny little DJ controller. Bundled with a copy of Serato DJ Intro to get you started with digital DJing. Very good affordable option for complete beginners. Check out our full review.

DJ2GO2 Touch is a portable, pocket-sized DJ controller with the ability to scratch on capacitive touch jog wheels. With a built-in sound card and Serato DJ Lite software, it fits perfectly in front of your laptop. Professional DJs loved its predecessor- DJ2GO2- when it debuted in 2017. DJ2GO2 Touch continues that successful path and now you can scratch! DJ2GO2 Touch was made for all DJ styles and is perfect to prep for your gigs, perform at small gigs, and as a space-saving extra setup for big events.

You unlock all the power of a large DJ controller with DJ2GO2 Touch. The capacitive touch jog wheels bring DJ2GO2 Touch to the next level. Perform light to heavy scratches and blend your mix by nudging the side of the jog wheel.

Your set demands the best, that's why DJ2GO2 Touch comes pre-mapped with Serato DJ Lite for Mac & PC (software included) and is upgrade-ready to the full version of Serato DJ. For first-time DJs, Serato DJ Lite now comes with demo music and an easy on-boarding tutorial that will walk you through the basics so you can start DJing right away. Built on Serato DJ Pro technology, Serato DJ Lite is designed to be intuitive, reliable & feature rich.

Change up your performance with DJ2GO2 Touch's compatibility with iOS apps including Algoriddim's DJay (see requirements for more details). Simply connect DJ2GO2 Touch to your device using the Apple Camera Connection Kit (sold separately) to mix, scratch, create beats, spice up your mix with remixes and much more!

Your search for finding new music just got a whole lot simpler. With Serato DJ Lite, stream everything from the freshest underground sounds to certified classics directly inside the app from leading providers including SoundCloud and TIDAL.

Featuring an on-board, driverless audio interface plus a dedicated 1/8-inch headphone output and 1/8-inch main output, keep your mix on point and effortlessly connect to virtually all mixers, powered speakers and audio recorders.

DJ2GO2 Touch comes packed with all the must-have mix essentials. Two channels, a crossfader, jog-wheels and pitch faders, access to critical functions for seamless blending or scratching are right at your fingertips!

With 8 pads and four pad modes for total-control of cue-points, auto / manual looping and sample playback, DJ2GO2 Touch gives you the same access to performance controls typically found only on larger controllers.

Combining a sleek, low-profile design and radiant backlit controls, DJ2GO2 Touch looks great and is made to move! What's more, it's powered over USB and supports plug-and-play connectivity for maximum portability and effortless integration.

Simplify your lighting control with a 2-month trial of SoundSwitch premium DJ lighting software included with the DJ2GO2 Touch. SoundSwitch is a Digital Lighting Workstation that lets users create lighting displays that are performed in time with audio files when played back live in Serato DJ. It allows DJs and lighting designers the ability to sync lighting visuals with live audio seamlessly.

INCLUDES:
DJ2GO2 Touch controller
Serato DJ Lite download card
Two month SoundSwitch subscription
USB cable
Quick-start guide
1/8" to RCA cable

Notes: Detachable, straight cable. Made for HD 25 Light. Available in the colour black with 3.5mm jack connector.

Dual-sided detachable cable

What's in the Box:

1.5m black cable (dual-sided)

Notes: The Glorious Record Stand 75 is a classy display as well as a storage solution for vinyl records and offers space for up to 75 records.

The timeless design captivates with a combination of wood elements and sturdy acrylic glass. The construction of the Record Stand 75 is suitable for all vinyl formats (7'', 10'', 12'') and allows, thanks to the grooved wood, comfortable flipping through the collection without records getting out of place. The useful angle of inclination on both sides keeps records from falling over.