100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Four Weeks: All Genres

Artículos del 1 al 17 de 17 en la página 1 de 1
Cat: 577753 Rel: 06 Jun 19
12dB multi-mode filter - 8HP
Notes: Module A-106-5 is a 12dB multimode filter that is based on the filter circuit of the Oberheim SEM module.

The filter is equipped with a band pass output and a combined low/notch/high pass output. For this output a control knob defines the relation between low and high pass signal. If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates.

The module does not feature self-oscillation in contrast to most of the other filters of the A-100 system.

The module generates a distorted audio signal if the level control is set to about 50% (i.e. centre position) or more with A-100 standard signals like VCOs.
Read more
 2 in stock $78.35
Click for better price!
quote 577753
Cat: 731938 Rel: 10 Jun 19
Noise/random generator - 4HP
Notes: Module A-118-2 is the slim version of module A-118-1 and offers essentially the same features as the A-118-1. But the distances between the controls are smaller and rubberized small-sized knobs are used. In return the front panel has 4 HP only which is half the width of the A-118-1. The module is primarily planned for applications where only limited space is available. The functional difference between A-118-1 and A-118-2 is the additional T&H/S&H unit which is not included in the A-118-1.

The module generates the signals white noise, coloured noise, continuous random voltage and stepped random voltage (derived from the continuous random voltage by means of a S&H/T&H unit).

The noise signal is generated 100% analogue by amplification of the noise of a transistor. White and coloured noise are usually used as audio sources. The random voltages are normally used as control voltages (e.g. for filter frequency or any other voltage controlled parameter).

The A-118-2 gives you the ability to mix the relative amounts of Red (low frequency component) and Blue noise (high frequency component) in the coloured noise output.

For the continuous random voltage the rate of change (Rate) and amplitude (Level) of the random voltage can be adjusted. The continuous random voltage is derived from the coloured noise signal by low pass filtering. Consequently the settings of the controls for the coloured noise (Blue, Red) affect the behaviour of the random voltage! A dual colour LED (red = positive / yellow = negative output voltage) indicates the continuous random voltage.

The continuous random voltage is used as source for the S&H/T&H unit. The type of operation can be set to S&H (sample and hold) or T&H (track and hold). When T&H is chosen the output signal follows the input signal (= continuous random voltage) as long as the Clock input is "high". As soon as the clock signal changes to "low" the last voltage is stored. When S&H is chosen the input signal (= continuous random voltage) is sampled at the rising edge of the Clock signal.

For the Clock signal a "digital" signal (e.g. Clock, Gate, rectangle output of an LFO) is required. It does not work with slowly changing continuous CV signals. Another dual colour LED (red = positive / yellow = negative output voltage) indicates the stepped random voltage.
Read more
 2 in stock $79.41
Click for better price!
quote 731938
Cat: 731945 Rel: 10 Jun 19
Multi-featured mixer - 6HP
Notes: Module A-138i is a four channel mixer with an additional mute switch for each input. On top of that it is equipped with two types of single outputs and a dual mix output. All inputs and outputs are DC coupled. Consequently the VCAs can be used to mix both audio and control voltages.

Each input is - apart from the mute switch - equipped with the usual attenuator.

The single outputs offer the attenuated and possibly muted signal of the channel in question. Two version of single outputs are available:

Single Output A: If a plug is inserted into the single output "A" socket the channel in question is removed from the sum signal.

Single Output B: If a plug is inserted into the single output "B" socket the channel in question is not removed from the sum signal. This type of single outputs is available only for the channels 1 and 2.

The output is twice available (two sockets, hard-wired like a multiple).

The distances between the controls and sockets are smaller as for the standard A-100 modules and rubberized small-sized knobs are used. In return the front panel has 6 HP width only. The module is primarily planned for applications where only limited space is available.
Read more
 1 in stock $77.29
Click for better price!
quote 731945
Cat: 577786 Rel: 06 Jun 19
Multi-connector module - 4HP
Notes: Modules A-180-1 and A-180-2 are simple multi-connectors. They have eight inter-connected sockets, so that you can "multiply" any audio or control signal. From the factory the modules come as two four-fold multiples. But they can be modified as an eight-fold multiple (solder bridge on the pcb). Though these modules are very "primitive" they are required very often in patches (e.g. to distribute a clock signal or a control voltage). Within a big A-100 system sufficient multiples should be planned. The function of A-180-1 and A-180-2 is the same. The modules differ only in the front panel width.

For the distribution of control voltages used for pitch control of several VCOs the buffered multiple A-185-2 is recommended. This module has a built in buffer (and a lot of additional features like CV summing) that avoids small voltage losses that may be heard in pitch control applications.
Read more
 1 in stock $35.99
Cat: 731951 Rel: 11 Jun 19
Quad passive switch - 4HP
Notes: A-182-2 is a simple passive module that contains four changeover switches, which are used to connect or disconnect the sockets of the corresponding socket triplet:

- In the upper position of the switch the upper socket of the corresponding socket triplet is connected to the centre socket
- In the lower position of the switch the lower socket of the corresponding socket triplet is connected to the centre socket
- In the centre position of the switch the sockets are not connected

Each unit of the module can be used to switch between two signals or to interrupt/connect a signal. In the last case the third socket of the triplet is not used.

The module is fully passive and both audio or control signals can be switched.
Read more
 1 in stock $68.82
Click for better price!
quote 731951
Cat: 731930 Rel: 21 May 19
analogue synth module with simultaneously waveform outputs
Notes: Fusion VCO2 is a full analogue sound source with lots of distinct features.

The core of the module is highly stable AS3340-based VCO with three simultaneously available waveforms, transistor-based suboscillator and detune function - two BBD delay lines that make frequency shifter that is mixed back to the principal oscillator in order to emulate two detuned VCOs. Tube crunch - distinct tube overdrive - is added on the top of the mix. Furthermore, Audio input mixes an external audio signal with the principal oscillator which results in crazy sonic experience. Fusion VCO2 is exactly what you need, if you wish to get really low frequencies and have a sound that sets your modular system apart from mass!

" Full analogue design
" Great tracking over 8 octave range
" Detune function for thickening the sound
" -1 oct transistor based suboscillator
" Tube overdrive circuit
" External audio input
" VCO synchronization
" Simultaneous waveform outputs
Read more
 2 in stock $330.37
Click for better price!
quote 731930
Cat: 720431 Rel: 28 May 19
MIDI interface for the TRAX! sequencer - 3HP
Notes: The MIDI BUS was designed to be a MIDI interface for the Eurorack system, and more specifically to offer MIDI inputs and outputs for the TRAX performance sequencer.

This device provides opto-isolation of the MIDI input and buffers all MIDI signals.

The MIDI BUS provides MIDI IN/OUT/THRU inputs and outputs on 3.5mm TRS jacks. Three 3.5mm to 5-pin DIN MIDI cables are included with each MIDI BUS product. These MIDI cables conform to the TRS MIDI B Spec Class, currently supported by Arturia, Novation, and 1010 Music devices.

The MIDI BUS uses the power bus cable to receive and transmit MIDI at the +3.3 volt standard. In order to do this, the MIDI BUS repurposes what the Eurorack standard defines as the INT GATE line of the power bus for MIDI IN signals, and the INT CV line of the power bus for MIDI OUT signals.

To prevent conflicts with other signals that may be using these lines of the power bus, we recommend using the special MIDI BUS power cable provided with this unit, or our optional Flying Bus power cable when using the MIDI BUS with the TRAX product or any other products using this new MIDI standard.

The MIDI BUS power cable that is provided with your MIDI BUS will allow only a single device in your system to send and transmit MIDI.

The optional Flying Bus power cable allows multiple modules connected to this cable to share MIDI data with one another and also receive the proper power from the system, without connecting MIDI signals to other modules in your system.
Read more
 1 in stock $68.82
Click for better price!
quote 720431
Cat: 731217 Rel: 18 Jun 19
Expander for Quad Operator's algorithm functionality - 4HP
Notes: Where the unexpanded Quad Operator maintains a one knob per function design discipline, we nevertheless recognized the value of some more advanced algorithm-oriented functionality.

The Algo expander for the Quad Operator provides:

- Saving and loading of modulation send knob positions for FM algorithm design reuse

- Crossfade between pairs of saved algorithms, or a saved algorithm and the live knob positions
Read more
 2 in stock $97.41
Click for better price!
quote 731217
Cat: 731216 Rel: 18 Jun 19
4 variable waveshape operators for linear FM synthesis - 30HP
Notes: Implementing frequency modulation synthesis completely from scratch in firmware, the Quad Operator is able to provide a modern take on frequency modulation synthesis.

- One knob per function design for true ease of use
- Any FM algorithm is possible via modulation matrix
- The Algo expander provides algorithm save/recall and crossfading capabilities
- Independent output per operator
- Virtual VCA per operator for both animating modulation and output volume control
- Includes a dedicated "AR FM" input with its own modulation sends, designed to bring an audio rate signal in from your rack for use as a modulator. Try processing a phase locked operator, and feeding it back in!
- Each operator can also be unlocked then tuned and patched independently, making the module a great general purpose oscillator bank
- Convincing digital emulation of classic analogue waveshapes - sine, triangle, square, and saw
- An LFO mode, enabled the generation of phase locked, complex modulation signals
Read more
 5 in stock $508.27
Click for better price!
quote 731216
Cat: 731192 Rel: 19 Jun 19
CV-controlled 5-channel stereo mixer - 10HP
Notes: X-PAN is a compact and powerful 5 channel Voltage Controlled Stereo Mixer with Low Noise and High Headroom allowing for creation of complex panoramic audio imagery in just 10hp.

X-PAN is highly responsive to control signals allowing for exploration of the fluctuating stereo sidebands possible with Audio Rate Crossfading and Panning. X-PAN is Direct coupled for use as a CV Processing and Routing toolbox.

X-PAN consists of two full featured Channels and one simpler Channel. The top two Channels each have voltage controlled cross-fading and panning while the third Channel is a stereo aux input with stereo VCA. All three Channels are combined together at the stereo SUM outputs.
Read more
 More than 10 in stock $241.42
Click for better price!
quote 731192
Cat: 733645 Rel: 29 May 19
Complex oscillation module - 22HP
Notes: The Noisy Oscillator module is an oscillator that mixes two signals: a 'regular' wave (sawtooth/square/triangle) and a 'tonal noisy' wave. This adds a special noisy layer over the sound, that adds 'air', grit or dirt, depending on the combinations you make. The MOD parameter acts on the noisy waveforms:

- Sonar Noise: a white noise filtered by a resonant bandpass filter, with 1V/oct tracking of the filter frequency. The MOD parameter controls the resonance.
- Wind Noise: white noise filtered by a comb filter, with 1V/oct tracking of the base frequency (delay). The MOD parameter controls a 6dB/oct hipass filter.
- Arcade Noise: LFSR noise source as can be found on the SID soundchips (Commodore) or Sega Arcade games. The MOD parameter controls again a 6dB/oct hipass filter.

The noisy wave can be set equal, or 1 or 2 octaves above the regular wave.

The module has two voices, with their own set of CV and output connectors. This can be used to play in a full 2-voice polyphony, or in a 2-voice unison. The outputs can be separate, using both output connectors, or mixed, using only the connector of the second voice.

Next to the 1V/oct pitch CV, the module offers CV control over pitch (FM), the MOD parameter and the sound level:

- FM CV: pitch control normalled to 0V, attenuated with the FM knob (+ and -). This allows for Frequency Modulation up to the lower audio range. It's of course a digital module, so higher frequencies can start inducing aliasing and digital artefacts.
- MOD CV: CV control for the MOD parameter, normalled to 0V and attenuated with the CV AMT knob (+ and -).
- LEVEL CV: CV control for the sound volume, normalled to 7.5V. With this CV control you can omit an external VCA stage if you want.

The CV signals of the second voice (upper row of connectors) are always normalled to the signal of the first voice (lower row), so you can use a single LFO for some FM vibrato or tremolo on both voices, for example. Only the V/oct connector of the second voice is normalled to the first voice with an extra addition of a fixed voltage that can be set using a trimmer at the backside of the module. This way you can use the 2 voices to play in unison with a fixed pitch separation you can set on the backside.
Read more
 3 in stock $340.96
Click for better price!
quote 733645
Cat: 725425 Rel: 23 May 19
wavetable oscillator synth voice module
Notes: Cursus Iteritas Percido is the second module in the Percido line of powerful synth voices. Similar to its predecessor the Loquelic Iteritas Percido, CIP takes the original Cursus Iteritas and adds the same musical envelope from LIP with attenuverter-controlled routing to every knob. With the inclusion of the performance-oriented Master Blaster and CV outputs, CIP is a powerhouse of incredibly versatile synthesis.
Read more
 2 in stock $542.15
Cat: 727393 Rel: 23 May 19
VCF and VCA combo synth module
Notes: Sinc Bucina is the sequel to one of our first modules, Sinclastic Empulatrix, replacing the clamping VCA with a resonant lowpass VCF and VCA combo. The velocity-dependent Ping input offers classic release-only LPG behavior, while the Gate in offers much more complex slewing, useful for simple ASR envelopes to dynamic modulation. The envelope out allows the internal envelope to be routed out into a patch for even more versatility and modulation fun.
Read more
 2 in stock $140.83
Cat: 727394 Rel: 23 May 19
Powerful distortion module - 4HP
Notes: Terci Ruina combines three classic distortions in 4 hp. Distortions are reinterpreted in classic NE style and routed through each other for complete sonic annihilation of any sound. Patch in and out anywhere in the signal chain to pick the best sound for your purpose (because modular). Looking for a pretty distortion? This is probably not your module. Unapologetically gross and dirty.
Read more
 3 in stock $129.18
Click for better price!
quote 727394
Cat: 718648 Rel: 20 May 19
Triple oscillator module with various modulation possibilities - 30HP
Notes: The latest brainchild of synth pioneer Dave Rossum, TRIDENT is a 100% analogue, triple oscillator module that opens up a universe of dynamic timbral textures.

At its most basic level, TRIDENT is three precision audio VCOs, each sporting a unique variety of control voltage inputs.

The main or "Carrier" oscillator provides its three waveforms simultaneously. The two Modulation Oscillators each have a single output and a waveform selector. The Modulation Oscillators also have a voltage controlled Symmetry parameter which varies the duty cycle of the triangle wave output from sawtooth to triangle back to time reversed sawtooth, and also varies the sawtooth output to have an upward or downward kink in the middle, as well as controlling pulse width when the pulse waveform is selected.

And while each oscillator can be used independently if desired, it's when they're combined into a synchronous ensemble that the real sonic magic happens.

That magic is what we call "Zing" modulation. Each of the Modulation Oscillators can modulate each of the Carrier outputs in an amount controlled by the Zing parameter. Zing modulation is mathematically akin to ring modulation, but due to the synchronization of the oscillators (when an oscillator's Sync button on), the harmonic sum and difference sidetones of ring modulation transform into complex but purely harmonic overtone spectra, which vary dynamically and dramatically with the frequency and waveshape modulations of the modulation oscillators. Each change in the Modulation Oscillator parameters - Frequency, Symmetry, Waveshape, Zing, and (in the case of Modulation Oscillator 2) Phase - will have a different effect on the timbre of each of the three Carrier waveshape outputs.

When the modulation oscillators are set to track the carrier oscillator, the waveshape will remain constant as the carrier frequency changes. In this case the overtone structure is determined by the settings and CV modulations of the modulation oscillators. If instead the modulation oscillators do not track the carrier, some of the overtone structure will vary relative to the carrier frequency.

What all this means is that whether musicians take advantage of TRIDENT's unique synchronous modulation capabilities (which they, of course, should), or just treat it as three superb, wide-range analogue oscillators, TRIDENT offers a vast variety of dramatic sonic textures.
Read more
 7 in stock $621.57
Click for better price!
quote 718648
Cat: 732829 Rel: 07 Jun 19
Trigger expander for the Nerdseq sequencer - black
Notes: The More Triggers 16 is a trigger expander for the Nerdseq sequencer. Adds 16 more Trigger/Gate outputs to the NerdSEQ.
Read more
 2 in stock $140.83
Cat: 732828 Rel: 07 Jun 19
Trigger expander for the Nerdseq sequencer - silver
Notes: The More Triggers 16 is a trigger expander for the Nerdseq sequencer. Adds 16 more Trigger/Gate outputs to the NerdSEQ.
Read more
 1 in stock $159.89
Click for better price!
quote 732828
Artículos del 1 al 17 de 17 en la página 1 de 1


Four Weeks: All Genres