100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

Inicio  Coming Soon  

Studio Equipment

Artículos del 51 al 100 de 523 en la página 2 de 11
«  1  2  3  ...  11  »
ADDAC System ADDAC207 Intuitive Quantizer Module (red faceplate)
Notes: 4 Voices of Quantization with a 10 octave range.

Menu Reaction Time can be adjusted and saved.

User definable Scales- any scale is possible.

Simple Intuitive menu with settings such as:
User definable NOTES Intervals for Chord generation
Quantization types: Above, Below, Ignore
Definable Gate Out Length
Octave Offsets
Keyboard Mode (using Buttons as triggers)
Read more
coming soon $347.67
Intellijel µMIDI 1U Module
Cat: 785361 Rel: 21 Oct 20
MIDI voice and clock interface
Notes: All the essentials to control and sync your rack to your computer, iPhone/iPad, or hardware MIDI device. No menu diving or configuration scripts, just two buttons. Get crazy with external modulation and sequencers, or just sync your rack's clock from your MIDI bus.

The uMIDI 1U provides all the essentials to control and sync your Eurorack modular from your computer, iPhone/iPad, or hardware MIDI device with a minimum of fuss. No menu diving or configuration scripts, just two buttons. The connectivity, features, and compact size allows the integration of your modular system with the rest of your studio while not taking up too much space in your case.

The clock section to the left features a dedicated 16th note clock output ideal for synchronizing a Eurorack sequencer like the Metropolis. A second clock output with selectable divisions can be used when difference sync events are needed. The run and reset outputs can reset your Eurorack sequencers in tandem with any external sequencer or DAW.

The right half of the uMIDI 1U gives you everything you need (like pitch, gate, trigger, velocity, mod wheel and assignable CC) to control a single voice synth via MIDI.

This module connects via ribbon cable to the uMidi JACKS 1U module or to the MIDI I/O jacks on the back of the 7U performance cases.
Read more
MRP:$244.03 SAVE 17%
coming soon $203.35
Behringer 904B VC High Pass Filter Module
Cat: 772804
filter module
Notes: Enter the Behringer 904B VOTLAGE CONTROLLED HIGH PASS FILTER Module. A vintage-sounding authentic reproduction of the circuitry from the Modular 55 & 35 Series used by the world's most famous pop, rock and jazz musicians for their shows. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 904B VOLTAGE CONTROLLED HIGH PASS FILTER allows you to attenuate low frequencies and accentuate higher ones in a signal. With the Fixed Control Voltage knob, also known as a cutoff frequency, determines the frequencies attenuated below a certain point. Switch the Frequency Range between Low (4 Hz to 20 kHz) or High (10Hz to 50 kHz) to select what frequencies the Fixed Control Voltage affects. You can use the 904B to let you cut through a mix for some searing lead tones or pair it with the Behringer 904A VOLTAGE CONTRLLED LOW PASS FILTER and be prepared to hear some very interesting sounds.

Audio in and out connectors are available on the 904B that let you process an incoming signal before sending it to another module via a 3.5 mm TS cable. You can also use the Control Inputs to connect voltage signals from other modules to affect the cutoff frequency. Use this module to add distinct tweaks to your patches so you can create more unique sounds.

Installing the 904B VOLTAGE CONTROLLED HIGH PASS FILTER is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 904B VOLTAGE CONTROLLED HIGH PASS FILTER to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $109.33
Behringer Podcastudio 2 USB Bundle with USB Audio Interface
Cat: 772939
podcasting bundle
Notes: The PODCASTUDIO 2 USB bundle has everything you need to make high-quality podcasts, produce your own music and home recordings - plus it works seamlessly with your PC or Mac* computer! All the software you'll need is provided- a XENYX 302USB mixer with built in USB/audio interface, XM8500 microphone, HPM1000 headphones and much more - you'll be up and running in mere moments, right out-of-the-box!

No matter what your audio mixing needs, the XENYX 302USB provides the performance and features that can take your talent to the next level. With its professional sound quality, 5 Inputs with the legendary XENYX mic preamp, built-in USB/audio interface, plus rugged reliability - the XENYX 302USB is ideal for both your live gigs and recording sessions.

The XM8500 dynamic microphone is a performing/home recording enthusiast's dream come true! This professional-quality microphone is designed to capture your sound with outstanding sensitivity and accuracy. With its cardioid pickup pattern for excellent sound source separation and feedback rejection, this ultra-wide frequency response mic is an excellent choice for any performing or recording scenario - and it's rugged enough to go the distance! With its integrated shock mount system, mic stand adapter, spherical wind and pop filter, all in an impact-resistant carrying case - the XM8500 just may be the only microphone you'll ever need.

HPM1000 headphones provide everything you need for comfortable listening. The oval-shaped ear cups contain high-resolution capsules that deliver every nuance of your sound. Featuring a single-sided cord that resists tangling; an ultra-comfortable headband; and a 1/4" adapter for the 1/8" connector, HPM1000 phones are compatible with everything from your smartphone - to your mixing console.

Because you'll want to take full advantage of your XENYX 302USB's recording and podcasting potential, all the software you'll need for audio recording, editing and even podcasting is included - all free of charge and downloadable from behringer.com. You'll be ready to go live on your PC or Mac right out of the box. A free download of more than 150 virtual instruments and FX plug-ins is provided - turning your computer into a powerful home-based or mobile recording studio from input to output.

This amazing PODCASTUDIO 2 USB setup includes a: professional 5-input XENYX 302USB mixer with the studio-grade XENYX Mic Preamp; pair of high-quality HPM1000 headphones; great-sounding XM8500 dynamic mic - and all the cables and recording/podcasting software you'll ever need.
Read more
coming soon $99.49
Sound Machines BI1 Brainterface (Eurorack)
Cat: 777373
brainwave to synthesiser interface
Notes: The first commercially available brainwave to synthesizer (both CV and MIDI) interface on the worldwide market.

By using the Neurosky Mindwave headset you can coax your brain activity to change every parameter of sound, light and video devices in your performance or studio.

Headset NOT included.

Soundmachines BI1 brainterface is an exploration and performance tool for musician, producers, actors, body performers and coreographers who wants to connect their mental and emotional sphere directly with the performance.

The BI1 does nort require the use of a computer, and brings immediacy and easy of operation in this upcoming technology.

By stressing the capabilities of the Neurosky MindWave Mobile headset, the BI1brainterface is developed to connect your mental status to your gear, in the most easy and open way possible.

Whenever you have an analog modular synthesizer or a MIDI sound generator, you can influence on sounds, sequences, timbres and drive the performance with an added controller, the most sophisticated: you.

Attention and Meditation are the most 'robust' and repeatable variables that you can count on. But also the EEG power spectrum bands (Alpha, Beta, Gamma, Delta and Theta) are available to control other eight sound/light/video characteristics. As a bonus, your toolbox has a variable threshold to generate a 'trigger' based on your facial muscular activities (i.e. blinking or grin).

In the studio or in a live environment, weared by a dancer or an actor on stage, or just use it to relax yourself and raise your self-consciousness about focus, relax and meditation.

Bio feedback is another field of operation for the BI1brainterface, reaching applications such as the several described above and more.
Read more
MRP:$520.86 SAVE 19%
coming soon $424.21
ADDAC System ADDAC812VU Module (black faceplate)
Cat: 776439
metering module
Notes: Stereo/dual VU metering module with buffered thru outputs for each channel.

An additional switch turns the beautiful lamps behind the VU meters off, in case your rack is running low on power!

A couple trimmers on the back of the module allows the user to define the VU range of each channel independently.

. Format: Eurorack
. Width: 8 HP
. Depth: 3.5 cm

. Max current with lamps on: +100mA/-10mA
. Max current with lamps off: +10mA/-10mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
coming soon $142.13
ADDAC System ADDAC506 VC Stochastic Function Generator Module (black faceplate)
Notes: Inspired and officially licensed from Teia's Stochastic Function Generator which was introduced in 2013 but is no longer available. This earlier version served as an inspiration, but with a completely rebuilt and reprogrammed mcu to a fully featured 4 voice 2 stage envelope and slew generator.

This new module + expansion is ADDAC System's take on a different envelope/slew generator. It's a fully featured Quad Analogue Core Envelope Generator and Slew Processor with digital control which also incorporates built in random generators to control the Rise and Fall times.

Covering the full range from short sharp notes to long slow sweeps of up to 6 minutes. Together with the random generators it excels when used for drone soundscapes.

Used as a Slew Processor the random generators act as dynamic modulation sources affecting the rise and fall slew speed.

Fully featured outputs act as encouragement to self-patching creating interdependent envelopes acting in sync.

width: 20HP
200mA +12V
150mA -12v

width: 2HP
10mA +12V
10mA -12v

Each channel CV output range can be set with the [Amplitude] and [Offset] attenuverters.
Amplitude can be set to a maximum of 10v peak to peak(pp), ex 0 to +10v or -5v to +5v.
Offset can as a maximum range of 20v peak to peak and allows to offset the CV to i10v.
Read more
coming soon $370.63
Teenage Engineering OP-Z Grip Knob Kit
Cat: 784902 Rel: 16 Oct 20
Knob kit
Notes: Additional grip knobs for the OP-Z
Read more
MRP:$32.80 SAVE 17%
coming soon $27.33
Tangible Waves AE Modular SOLINA String Machine Emulation Module
Cat: 786501 Rel: 31 Oct 20
String machine emulation module
Notes: SOLINA, an emulation of the 70ies string machines!

The SOLINA module is based on th excellen work of Jan Ostman, who has developed a very good digital based emuation of the sound of the string synths that were popular in the music of the 70ies and 80ies, like ARP Solina (who gave this module it's name), Logan String and others.

Their unique sound is based on several, minor detuned sawtooth oscillators and an ensemble effect.

This module produces chords, which can be shaped in different ways, like selecting the base scale (minor, major), adding the 7th or a bass note and different variations of the chord. The sound can be shaped with a variable oscilator spread/detune, adding a phaser/ensemble and a tone knob for choosing the overall character between bass focused to only higher parts of the sound.
Read more
MRP:$94.46 SAVE 17%
coming soon $78.71
Apogee Symphony Desktop Audio Interface
Cat: 762366 Rel: 31 Aug 20
audio interface
Notes: Symphony Desktop for Mac and Windows packs the legendary sound quality of Apogee's rack-mount Symphony I/O Mk II into an elegant and inspiring 10x14 audio interface that sits on your desk and fits in your bag. With Symphony Desktop, musicians and producers are empowered to record, overdub and mix with the music industry's most respected AD/DA converters and mic preamps.

By combining superior performance, with new features like mic preamp emulation, the Apogee Channel FX plugin and ultra low latency recording with hardware DSP and Apogee native FX plugins, Symphony Desktop will amplify your creativity in your studio or on the go and give your recordings the Apogee sound quality Advantage.

Symphony Desktop not only delivers the music industry's most sought after and respected sound quality with its Symphony I/O Mk II pedigree, it offers the inspiring and elegant usability of the iconic Apogee Duet and Quartet.

Apogee FX Plugins included with Symphony Desktop:

Symphony EQ - Native and hardware versions
Symphony Compressor - Native and hardware versions
Symphony Reverb - Native version

Mic Preamp Emulations included with Symphony Desktop:

British Solid State - Class A console sound - Inspired by the Marinar "Round can" input transformer and discrete transistor design of the Class A Neve 1066 mic preamp.
American Tube - Lush, 50s Tone - This emulation offers the lush, larger-than-life sounds of the 50s era Ampex 601 preamp, carefully restored and modded for lower noise and greater dynamic range.

In the Box:

Symphony Desktop
12V DC power supply
USB Type C to A cable
USB Type C to C cable
Quick start guide
Read more
MRP:$1,704.29 SAVE 17%
coming soon $1,420.24
TC Helicon Go XLR Broadcast Mixer With Midas Mic Preamp & Vocal Effects
Notes: Revolutionary Online Broadcaster Platform with 4-Channel Mixer, Motorized Faders, Sound Board and Vocal Effects

Read more
coming soon $343.31
ADDAC System ADDAC806 Bluetooth Audio Module (red faceplate)
Notes: This small module will allow you to send wireless audio signals from any bluetooth compatible device straight to your modular.

. Format: Eurorack
. Width: 4 HP
. Depth: 4.5 cm

. Max current: 75mA on each rail
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
coming soon TBA
Division 6 Dual Mini Sequencer V2 Module (black faceplate)
Cat: 777964
sequencer module
Notes: The Division 6 Dual Mini Sequencer gives you two handy little sequencers behind one Eurorack panel. Why would you need more than one sequencer? Why would you need mini sequencers?

More sequencers = more steps
Use one for playing notes and the other for transposing those notes
Can be used as a clock divider
Run in parallel for multiple CVs / triggers
Each one gives you the standard CV and gate out, plus an ACC out (Accent? Accessory?) Use it to open up a filter, enable a glide, trigger a drum, or whatever you can think of.

The two sequencers will run completely independently, or you can daisy-chain them using the XP IN/OUT jacks to create sequences of any length.

Each sequencer has its own internal clock to get you up and running in a hurry, but you can connect an external clock if you need greater control of tempo or want to sync with other devices.

The module stores your latest sequence even when the power has been removed (plus some other ones in v2!).

While this kit is designed to give you a Eurorack module, the PCB patterns for the jacks also have holes that will accept Johnson/Cinch-style banana jacks. There are also standoff holes on the main PCB, so you can mount them behind your own custom panel.

This module has lots of LEDs and is very shiny, but only two of them are ever on at a time which keeps it from loading down your power supply.

CLK IN (External clock input)
XP IN (Expansion input; Starts sequencer back at step 1. Use for daisy-chaining multiple units)

XP OUT (Sends pulse when sequencer goes past last step. Use for daisy-chaining multiple units)
ACC OUT (Can be programmed on or off in each sequence step)

Power supply: +12VDC (reverse-polarity protected!).
Power supply (Optional): +15VDC
Current draw: 30ma (+12V) / 0ma (-12V) / 0ma (+5)
Width: 18HP
Depth: 0.83in / 21mm
Read more
MRP:$251.90 SAVE 19%
coming soon $203.35
EMW Noise Station Module (black faceplate)
Cat: 775430
noise station module
Notes: The NOISE STATION module is the definitive source of noises and filters to serve as the basis for creating percussion and noise related sounds. In its Generator section it has 7 independent noise sources with various tones and spectral distributions. In its analog Filters section there's 4 fixed filters and 2 variable filters. These filters alters the spectral distribution in many ways, allowing for the creation of very exclusive and powerful noise tones.

Eurorack (3U) form factor - 18 HP width
Power consumption: +12V [39mA] / -12V [17mA]
Weight: 195g
Depth: 50mm
Read more
MRP:$203.36 SAVE 22%
coming soon $159.63
Division 6 Business Card Synthesizer (fully assembled)
Cat: 777973
business card synthesiser
Notes: The Business Card Synthesizer is a tiny synth that can be connected to a Business Card Sequencer, other synth gear, or played by itself.

Headphones can be connected directly to the output of the synth, and there are plenty of knobs to play with, so you can easily make noises anywhere. Great for learning about synthesizers!

S&H Button: Enables Sample & Hold, which disables the external CV IN jack and uses LFO1 and LFO2 to determine oscillator pitch. LFO1 sets the sample rate (SHAPE is ignored for this), and LFO2 is the wave that gets sampled.

GATE Button: Manually turns on the gate so sound comes out of the synth. This control is momentary, but you can latch it on by tapping the S&H button while holding the GATE button down.

COARSE TUNE: Adjusts the pitch of the oscillator up or down in large increments

FINE TUNE: Adjusts the pitch of the oscillator up or down in fine increments

SHAPE: Changes the shape of the wave produced by the main oscillator (VCO). Turning this control fully CW gives you a triangle wave. Start turning it CCW takes you through sawtooth/ramp, then at about the 12:00 position you get a square wave. Continue turning it CCW and you get several higher duty cycle square waves
GLIDE: Adjusts the rate at which the pitch of the VCO takes to go between pitches (whether changed by the COARSE TUNE knob or CV IN). Fully CCW causes the pitch to react almost instantly, while fully CW makes it take its sweet time.

LFO 1 / LFO 2 SHAPE: Changes the shape of the waves produced by the low-frequency oscillators (LFOs). The shapes are similar to those of the VCO, except that the LFOs have sawtooth/ramp waves that go both up and down (since you can actually hear the difference at LFO rates).

LFO 1 / LFO 2 RATE: Controls how fast the LFOs go.

LFO -> VCO: Routes the two LFOs to control the pitch of the main oscillator. The 12:00 position is basically "off", and the LFOs have no effect on pitch. Start turning the control CCW and LFO1 starts changing the pitch of the VCO. Maximum effect is at about 10:00. Continuing to turn the control starts to bring in LFO2 as well. All the way CCW gives you full effect from both LFO1 and LFO2.

Turning the control CW from 12:00 does essentially the same thing, but brings in LFO2 first, then LFO1.

This might seem like kind of a weird control, but it gives you quite a bit of routing flexibility with one knob. You can have no pitch modulation, LFO1, LFO2, LFO1 with a little LFO2, or LFO2 with a little LFO1.

LFO -> VCA: Routes the two LFOs to control the amplitude of the oscillator. (See LFO -> VCO control description above for more information about how the control works.)

ATTACK: Controls how fast the audio amplitude fades in when the gate is triggered. CCW is fast and CW is slow.

DECAY: Controls how fast the audio amplitude fades out when the gate is released. CCW is fast and CW is slow.

VOLUME: Controls the overall volume of the signal coming from AUDIO OUT.

FILTER: Changes the cutoff frequency of an analog low-pass filter. Turn the knob fully CW and all frequencies (that you can hear) are let through. Start turning it CCW and the high frequencies start getting cut off, until the sound becomes muddy / muffled. Use in conjunction with the SHAPE control to get the tonal quality you are looking for.

CV IN: Accepts a 1 volt/octave control voltage to control the pitch of the oscillator. It responds from about 0-5V, but voltages outside of this range won't cause damage. The CV input is quantized, so only valid (western scale) notes are played. This input is ignored when Sample & Hold is enabled.
GATE IN: A voltage greater than about 2.5V will turn on the gate and allow audio to come out the output of the synth.
AUDIO OUT: Connect to an amplifier or another synth. The jack has both the tip and ring connected, so you can even use stereo headphones and hear sound from both ears.
Power: Connect 7.5-15VDC to this 3.5mm TS jack to power the synthesizer. The tip is positive (don't worry, there's a protection diode in case you get it reversed). You can get power from a 9V battery, AC adapter, or you may even be able to find an output on your modular synthesizer that can provide enough current.

Power supply: 7-15VDC (reverse-polarity protected!)
Power connection: 3.5mm phone jack, center-positive
Current draw: 15ma
Dimensions: 3.5" x 2" (the same as a business card!)
Read more
MRP:$108.90 SAVE 19%
coming soon $88.55
ADDAC System ADDAC601 VC Fixed Filterbank Module (black faceplate)
Cat: 776346
analog filterbank module
Notes: The ADDAC601 Analog Filterbank will have you shaping the spectrum of your sound "tout de suite".

With its 8 fixed frequencies, this very special filterbank has two additional features that you won't find anywhere else. Each of the 8 band volumes can be controlled through a linear high performance VCA, which adds great dynamics and new abilities to the art of filtering. Additionally this module also doubles as an envelope follower, with a dedicated CV output per band.

It features numerous output options: you can select between individual bands, the full processed sound, a wet/dry signal and even choose between odd or even frequencies.

Plus you can add up to two different signals, which are mixed internally by the ADDAC601 inputs.

. Format: Eurorack
. Width: 20 HP
. Depth: 5.5 cm

Control Voltage I/O:
. CV inputs: i 5v
. CV outputs: 0 - 10v

. Compatible with +-12v and +-15v power supplies
. Max current: +340mA/-350mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
coming soon $392.50
Intellijel XY I/O 1U Module
Cat: 785358 Rel: 21 Oct 20
Conncector for Intellijel products
Notes: Use this module to tap into the 3-pin LINK connector used in several Intellijel products, including Mixup, Pedal I/O and the Palette and 2nd Generation Audio Jacks Board in a 7U case.

The XY I/O uses two 3.5mm TRS jacks, which accept insert cables to provide send/return capability to a pair of Pedal I/O's, or additional stereo inputs (or outputs) to a pair of Mixups, or one of each.

A third 3-pin Link connector on the back panel allows the X and Y jacks to access the L/R (or Send/Return) jacks on a single connected module or case without needing a stereo cable.
Read more
MRP:$27.55 SAVE 17%
coming soon $22.95
Behringer 995 Attenuators Module
Cat: 772930
attenuators module
Notes: Enter the Behringer 995 ATTENUATORS. An authentic reproduction of the circuitry from the Modular 55 and 15 series attenuators used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 995 features three separate attenuators each with their own independent inputs and outputs. The attenuators can be used to adjust the level of the input signal passively from - 8 to unity gain and accept both audio and CV signals. Connecting a single signal to the first input will allow it to pass to all 3 outputs for up to 3 variable outputs of a single signal source. Introducing a signal into the subsequent outputs will break the chain from the previous input. For example, if you have a signal in input 2, then this will feed into input 3 leaving input 1 to feed out of output 1.

Installing the 995 is simple as it was designed to fit into a standard Eurorack case. This allows for the 995 to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $60.13
Behringer CB100 Condenser Gooseneck Microphone
Cat: 772994
condenser gooseneck microphone
Notes: CB 100 is a very directional microphone, best at isolating from other nearby instruments on stage. You chose the right mic for your instrument to ensure the greatest sound which blocks out the bleed from other sound sources.

The placement of the mics can make a huge difference on the character of the sound you create. You have chosen the right instrument mic with flexible and stable gooseneck, now all you need do is to place the mic in the sweet spot for the best harmonics and enjoy the music you make.

CB 100 is the most versatile microphone which allows you to mic up every instrument- you won't ever need another microphone for miking up.
Read more
coming soon $39.35
Teenage Engineering OP-1 Accessory Kit
Teenage Engineering OP-1 Accessory Kit (synthesiser & sequencer accessory kit)
Cat: 784900 Rel: 16 Oct 20
Accessory kit for OP-1
Notes: The OP-1 world is continuously evolving with new accessories and new OS updates adding more effects and functions with every release. With OP-1's modular architecture, all this new functionality comes without adding any complexity to the user interface or resulting in over-clustered screens. Your OP-1 will always be intuitive and simple to use.

Accessories included in the OP-1 Accessory Kit:

3.5 mm plug-in radio antenna for better signal reception when indoor or in remote areas.

Mount the crank accessory on OP-1's blue knob and press shift + rec. Your OP-1 is now in "hand-crank-recording mode". Use the crank to create some real vintage old skool recordings. It's also possible to crank counter clockwise, to record backwards. All in realtime. The crank also lets you use the endless sequencer as a hand cranked music box! Just enter the notes and crank the crank! The crank LFO lets you crank any parameter.

Bender mounts on the orange knob and comes with a rubberband that is attached around the blue knob for elasticity. By selecting the bender in the LFO browser, you may bend any parameter you like. Everything from pitch to filter or synthesizer parameters.

Brick Shaft:
Brick shafts are LEGOr compatible shafts that you put on any of the knobs. Now you may mount any lego part. Why not put on a big lego rubber wheel for that extra grip? Or build your own motor driven programmable LFO together with LEGOr MINDSTORMS? The brick shaft comes in four colors and lets you experiment with any parameter. It supports any idea you may have that involves LEGOr bricks.
Read more
MRP:$64.29 SAVE 17%
coming soon $53.57
Audio Technica ATH-M50X Limited Edition Professional Studio Monitor Headphones (purple & black)
Notes: As the most critically acclaimed model in the M-Series line, the ATH-M50 is praised by top audio engineers and pro audio reviewers year after year. Now, the ATH-M50x professional monitor headphones feature the same coveted sonic signature, with the added feature of detachable cables. From the large aperture drivers, sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals.

Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.

Type: Closed-back dynamic
Driver Diameter: 45 mm
Magnet: Neodymium
Voice Coil: CCAW (Copper-clad aluminum wire)
Frequency Response: 15 - 28,000 Hz
Maximum Input Power: 1,600 mW at 1 kHz
Sensitivity: 99 dB
Impedance: 38 ohms
Weight: 285 g (10 oz), without cable and connector
Cable: Interchangeable cables: detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable, detachable 3.0 m (9.8') straight cable and detachable 1.2 m (3.9') straight cable
Accessories Included: Protective carrying pouch, 6.3 mm (1/4") screw-on adapter
Read more
MRP:$196.80 SAVE 17%
coming soon $163.99
Tangible Waves AE Modular QUANTIZER Automatic Musical Scales Module
Cat: 786489 Rel: 31 Oct 20
Quantizer module
Notes: The QUANTIZER takes four different CV inputs and processes them in a way that the CV values "snap" to the exact values so that oscillators controlled by the outputs of the module play the notes of a selected musical scale. With an encoder one of 16 scales can be selected and is displayed in a text display,

There are 4 independent channels that are quantized to the same selected scale.

As an additional feature, the module provides a trigger signal for each channel on every change on the output CV.

Finally, with a switch the scale selection can be "frozen" so there is no accidental change possible.

There are 4 independent channels that are quantized to the same selected scale.

Module power consumption: 15 mA

CV 1 - accept CV for channel 1 of the quantizer
CV 2 - accept CV for channel 2 of the quantizer
CV 3 - accept CV for channel 3 of the quantizer
CV 4 - accept CV for channel 4 of the quantizer
CV 1 - Quantized CV from channel 1 of the quantizer
CV 2 - Quantized CV from channel 2 of the quantizer
CV 3 - Quantized CV from channel 3 of the quantizer
CV 4 - Quantized CV from channel 4 of the quantizer
TRIG 1 - Gate signal on change of CV from channel 1 of the quantizer
TRIG 2 - Gate signal on change of CV from channel 2 of the quantizer
TRIG 3 - Gate signal on change of CV from channel 3 of the quantizer
TRIG 4 - Gate signal on change of CV from channel 4 of the quantizer
MULT - unbuffered multiple, unconnected from the module's circuitry
B. CV - CV signal from MIDI
Please note:

The notation of the outputs is slightly different on the panel than indicated here. There are two rows of identical outputs, side by side. For each output-trigger there is an activity LED, indicating a change in quantized CV.

SCALE Knob - selects the current scale. 16 scales are available, the selected scale will be displayed in the small display to the right of this knob
LOCK Switch - prevents accidental changes of the selected scale when activated
OFFSET Knob - Select from up to 12 notes from the well-tempered scale as base-value, depending on the scale selected. All left would be equivalent to a key of C
Please note:

Scale selection directly takes place when the SCALE Knob is turned, clicking it has no specific effect.

Available SCALES, as indicated on the display, are as follows:

Minor (e.g. equivalent to A-B-C-D-E-F-G in ‘A minor’)
Major (e.g. equivalent to C-D-E-F-G-A-B in ‘C major’)
Dorian (e.g. equivalent to C-D-Eb-F-G-A-Bb in ‘C Dorian mode’)
Phrygian (e.g. equivalent to C-Db-Eb-F-G-Ab-Bb in ‘C Phrygian mode’)
Lydian (e.g. equivalent to C-D-E-F#-G-A-B in ‘C Lydian mode’ )
Mixolyd [Mixolydian] (e.g. equivalent to C-D-E-F-G-A-Bb in ‘C Mixolydian mode’ )
Locrian (e.g. equivalent to C-Db-Eb-F-Gb-Ab-Bb in ‘C Locrian mode’)
Gypsy (e.g. equivalent to C-D-Eb-F#-G-Ab-B in ‘C Hungarian minor scale’ )
Whole (equivalent to C-D-E-F#-G#-A# or B-Db-Eb-F-G-A as ‘Whole tone scales’)
Pent Min [Pentatonic Minor] (e.g. equivalent to C-Eb-F-G-Bb in ‘C Minor pentatonic’)
Pent Maj [Pentatonic Major] (e.g. equivalent to C-D-E-G-A in ‘C Major pentatonic’)
1-3-5 (e.g. equivalent to C-E-G in ‘C’)
1-3-4 (e.g. equivalent to C-E-F in ‘C’)
Fifth (e.g. equivalent to C-G in ‘C’)
Octave (e.g. equivalent to C in ‘C’)
Chromat (The 12 welltempered notes of the chromatic scale)
Read more
MRP:$77.41 SAVE 17%
coming soon $64.50
Zoom H8 Digital Handy Recorder
Zoom H8 Digital Handy Recorder (digital recorder)
Cat: 783484 Rel: 31 Aug 20
Handy recorder
Notes: Zoom has unveiled the new H8, the most adaptable handy recorder ever made. For over two decades Zoom handy recorders have been the go-to portable audio recorders for professionals, amateurs and everyone in between. The new H8 takes portable audio capture to a whole new level for Musicians, Podcasters and Sound Designers.The H8's ingenious color touchscreen interface presents a radical, yet intuitive "3-way" app workflow navigation like on your smartphone. So, whether you're recording music, sound effects in the field, or professional podcasts, the H8 adapts instantly to the feature set required for the job.

Under its hood the H8 features all of Zoom's industry-leading audio fidelity, legendary transparent preamps, and overall dependable performance. With four XLR and two XLR/TRS combo jacks and 4 capsule inputs, the H8 can record up to 12 tracks simultaneously, and you can quickly and easily adjust input type, lo-cut, EQ, compression, limiter, noise gate, and more. In addition, the H8 can be remote controlled via an IOS device and you can load your own effects via the Guitar Labs software. For podcasters, the H8 features four Sound Pads to activate sound effects such as laughter and applause. You can choose from 13 prerecorded sounds or download your own sound effects from your SD-card. The H8's updated Capsule System 2.0* provides even more flexibility with brand new, high-end, mic and input attachments, as well as offering flawless backwards compatibility with the H6's capsules.

Handy Recorder

12 simultaneous recording tracks, interchangeable capsules, and an App-driven touchscreen interface, the H8 is designed to meet all your audio recording needs.

There's An App For Your Workflow
Whether you're capturing audio on location, recording music, or producing a podcast, the H8 color touchscreen adapts to your project's needs with three App-driven interface options. All with the touch of your finger.

The Podcast App
The PODCAST App makes high-production quality simple. With dedicated Sound Pads, use the touch screen to trigger sound effects, music beds and more. Choose from 13 high quality sounds or load your own via an SD card. (The Podcast App accommodates up to 4 mics and two Sound Pad channels.)

The Music App
The MUSIC App puts all the important controls at your fingertips: audio levels, faders, metering and more. With 10 inputs and 12 tracks, capturing a large group is easy. Mix, overdub, and enhance your recordings with EQ and compression. Connect to Zoom's Guitar Lab via USB to access an endless assortment of amps and effects.

The Field App
The FIELD App is ideal for location sound, sound design, conferences, and more. It gives you instant access to large meters for every track, so you can make sure your recordings never clip. Adjust input type, lo-cut, compress, limiter, noise gate, and other key settings.

The Mic Capsule
The H8 comes with the Zoom XYH-6 microphone. This capsule provides two matched high-quality unidirectional mics, for capturing signal directly in front of the recorder. With the Zoom mic capsule system you can easily swap capsules to ensure you're always using the right mic for the job.

Next Generation Capsule System
Zoom's Capsule System 2.0 allows up to 4 channels of audio to be added to the H8's capsule connection, creating new ways to expand your recording capabilities.

Combination XY / AB Mic
The XAH-8 capsule delivers pristine stereo recordings. Easily rotate the capsules from a tight XY pattern to a wide AB pattern to enhance the stereo image of your recordings.

Ambisonic Mic
The VRH-8 is an Ambisonic mic capsule that utilizes four condenser microphones to deliver immersive 360 audio recordings. A built-in accelerometer helps ensure the capsule is always perfectly aligned, while the on-board Ambisonic decoder automatically handles the necessary conversions, saving you time in post-production.

Expander Capsule
The EXH-8 capsule provides 4 additional XLR inputs, giving you a total of 10. Each additional input has a dedicated gain knob and pad switch. You can even use your favorite condenser microphones-just connect a power source to the EXH-8 capsule to supply phantom power.

Remote Control
You can monitor level meters and hit REC,PLAY, and STOP in each H8 application mode. Just insert the BTA-1 to your H8 and connect to your iOS device. (*BTA-1 sold separately.)

Inputs & Outputs
H8 offers 4 XLR inputs with dedicated pad switches and gain control. 2 additional XLR/TRS combo jacks with Hi-Z switches allow you to capture line level signals, microphones, or directly record electric guitars and basses.
Monitor tracks using the built-in 1/8" headphone output or connect directly to your camera using the dedicated stereo line output.
Read more
MRP:$549.73 SAVE 17%
coming soon $458.11
Tangerine Dream Solace Package (limited edition)
Cat: 777107
facemask bundle package
Notes: Content: 2 face masks, 1 high-quality poster of the Barbican TD Exhibition, 1 fridge magnet showing Edgar Froese.

Material: Cotton satin, breathable, hand-made, with elastic earloops, washable at 60 degrees Celsius.
Read more
coming soon $27.68
TC Electronic Clarity M Stereo Audio Meter
Cat: 781354
Stereo audio meter
Notes: Stereo and 5.1 Audio Loudness Meter with 7" High Resolution Display and USB Connection for Plug-In Metering.

The CLARITY M provides a comprehensive set of precision tools essential to the success of any audio producer. Ideally suited to stereo and 5.1 mixing, mastering and post-production, CLARITY M's 7" high-resolution LCD display provides a wealth of monitoring information at-a-glance via a single screen. Metering options include; the legendary LM6 Loudness Radar Meter; a state-of-the-art true peak meter; downmix compliance; stereo/surround correlation meters; and a RTA (Real Time Analyzer).

Source inputs come in a vast array of options including: USB for hassle-free VST*, Audio Units* and AAX* plug-in metering; 6 channels of unbalanced AES3 digital audio on 75 Ohm BNC connectors for broadcast-grade 5.1 metering; and stereo optical for maximum flexibility. CLARITY M is fully compliant with all major broadcast standards including ITU BS.1770-4, ATSC A/85, EBU R128, TR-B32 and OP-59, and is recommended for all studio environments.

CLARITY M provides a veritable toolbox of meter types to help you make the right mix and mastering decisions for truly professional recordings.

The high accuracy RTA with 1/3 octave resolution and individual band zoom provides a great overview of the spectral distribution of your mix.

Based on TC Electronic's highly acclaimed True-Peak Technology, the CLARITY M is your guard against otherwise unpredictable clipping.

Loudness Radar
The Loudness Radar is essential when it comes to monitoring the loudness of your mix. With the loudness history overview on the scope, the radar helps get the levels just right, while the momentary loudness in the outer ring keeps an eye on your instant loudness level.

Loudness Measures
Loudness statistics not only keep you compliant with loudness standards, they also provide crucial information on other important aspects of your mix, such as micro dynamics and macro dynamics.

Downmix Deviation
The Deviation meter is a fundamental tool to ensure your mix sounds great whether played back in 5.1, stereo or mono. This downmix compatibility meter is based on TC Electronic's Loudness Technology, and provides the best means for determining the status of your mix fold down.

Whether you mix in 5.1 surround or stereo, the correlation meter helps identify phasing issues and other anomalies that are easy to miss when relying solely on your ears.

While CLARITY M is an exceptional hardware stand-alone desktop meter, it also interacts seamlessly with your DAW workfl ow via plug-in metering - which is available for Pro Tools, Apple Logic Pro, Nuendo, and all other major VST*, AU* or AAX* compatible DAWs. CLARITY M is quite simply the ideal integration of two worlds.

CLARITY M provides a wealth of digital connectivity. Unbalanced AES3 (coaxial) and S/P DIF are available right out of the box, and optional adapters enable you to connect standard AES/EBU with ease. Additionally, you can use the TOSLink* port for optical input and the USB connection to work seamlessly with your favorite DAW.

CLARITY M includes an integrated stand, making it perfect for any desktop. A pair of mounting holes provides compatibility with RAM-Mounts, allowing convenient attachment to a wall or ceiling. Other options include a suction cup for mounting on hard surfaces and a tough-claw mount for mic stand applications, all of which are available separately.

With its high-resolution 7" display, wealth of metering tools, flexible connectivity and seamless DAW integration, CLARITY M sets the benchmark for computer integrated metering.
Read more
coming soon $244.90
ADDAC System ADDAC210 Open Heart Surgery Module (red faceplate)
Cat: 776186
development platfom module
Notes: This is a development platform optimized for the Eurorack electronic enthusiast.

Power sources:
-12V, +12V
-3/10V, +3/10V

Ships with: 1M Ribbon Cable and 55cm standoff Spacers for desktop operation, screws and nylon washers

Mechanical Specs:
Width: 36 HP
Depth: 3.5cm (i1.375 inches) with or without Arduino installed, Depth increases if using arduino shields.
Read more
coming soon $314.87
ADDAC System ADDAC213A Eurorack Bridge Module (black faceplate)
Notes: A pair of ADDAC213As acts as a simple one-cable bridge between different cases. By itself the ADDAC213As can send/receive 8 CV or audio signals between your cases, but can be expanded to bridge two cases for up to 24 signals at the same time.

Use a pair of ADDAC213As to send & receive 8 CV or audio signals between distant points in your case, between two separate cases, or between your case and a friend's case. Less clatter, less spaghetti, faster connection! There's nothing better than being able to connect that controller skiff with just one cable to your main system. At a gig, in the studio, when jamming with a friend, give yourself a gift by grabbing a pair of ADDAC213As.The modules can be installed in normal position or a 180 degree position to fit any need and any case design.

Each ADDAC213A module can be connected through a ribbon cable connection on its backside with up to two ADDAC213Bs. Each ADDAC213B module added expands the channels options of the ADDAC213A by adding 8 more channels. With two 2 ADDAC213Bs connected to each ADDAC213A module, you'll have a total of 24 channels going between your cases with a simple one-cable bridge. Between the ADDAC213A pair and the ADDAC213B, your cases never looked so elegantly connected together!

The ADDAC213As are always sold as a pair of 2 modules and an included ribbon cable.

Each module can be installed in normal position or at 180 degrees.

. Format: Eurorack
. Width: 6 HP
. Depth: 2.4 cm

Passive / Does not draw current
Ribbon Cable: 50cm or 100cm ribbon cable
Read more
coming soon $103.86
ADDAC System ADDAC103 T-Networks Module (black faceplate)
Cat: 776114
4-voice percussion module
Notes: Inspired by Twin T-Networks circuits used in many lengendary drum machines, ADDAC system have developed a simple and straight forward 4 voice percussion module with frequency controls for each of its voices.

At each voice input there's a gate to trigger converter so any input source is possible.
Audio inputs can also be used as an input, in this case and due to the nature of the gate to trigger converter, each voice can be used as very destructive filters.

The top 2 channels feature a higher frequency range, the bottom 2 channels feature a lower frequency range.

Tech Specs:
2.5 cm deep
40mA +12V
40mA -12V
Read more
coming soon $108.23
ADDAC System ADDAC402 Heuristic Rhythm Generator Module (red faceplate)
Notes: This module is a powerful rhythm generation machine- it features 4 voices of gate outputs (including inverted outputs for logic NOT sequences) where each voice can have independent lengths, all configurable with direct knobs anc cv inputs.

Perfect for precise polyrhythmic patterns and all sorts of non-linear sequencing.

The module works by 6 different rhythm generation "algorithms / principles":
Euclidean (equal distribution)
Golomb Rulers (inequal distribution)
Probabilistic (predictable distribution)
Game Of Life (organic progression)
Footwork'n (inducted error progression)
Pong (voltage controlled Pong game)

Plus a 4 channel Gate Sequencer Mode with up to 32 steps and 16 storable presets.

Add ADDAC402B Expansion for full I/O Midi control plus access to a powerful midi interface, with:
Midi Sync
5 cv to midi channels (notes and/or cc)
4 midi to gate channels
All panel controls (knobs, switches and push buttons) as cc controls.

All fully configurable with a midi learn feature for easier configuration.

Format: Eurorack
Width: 20 HP
Depth: 5.5 cm

CV inputs: 0 to +10v

Max current: 150mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
coming soon $479.97
Limaflo Motomouth Formant Filter Module (black faceplate, fully assembled)
Notes: Motomouth is an analogue 3-Band, Sedra + Espinoza Bandpass Filter (DABP) with resonant frequencies that are tuned to the same resonant frequencies found in the human mouth and nose cavities, and these can be varied, independently, to form different 'mouth shapes,' to emulate vowels such as A, E, I, O and U. Motomouth can emulate 16 vowels and 'morph' or 'glide' between each vowel using a single Control Voltage input (1V/Oct), and a Gate to 'snap' to each vowel when required.

Two of the bands (F1 and F2) are used to form the mouth cavity, and the third band (F3) is used to form the nasal cavity, which is reasonably static. Varying F3 makes little significant difference 'in the mix,' but having it is important.

The single Control Voltage is decoded to control F1 and F2 independently, because the frequency bands for each vowel are not proportional to each other over the vowel range. So Motomouth has learned how to 'speak,' so to speak, but it still needs to learn more, and that's where you come in.

Module width: 12HP
Module depth: 42mm
Power draw:
+12V: 80mA
-12V: 4mA
Read more
MRP:$283.39 SAVE 19%
coming soon $229.59
SynthRotek West Coast Noise System
SynthRotek West Coast Noise System (modular synthesiser system)
Cat: 778522
noise module
Notes: Clear a room faster than ever with the West Coast Noise System. The amount of insanity you can create from so few modules is incredible. It's analog drums, 8bit crunch and noise married to a sequencer. Be sonically devastating or intriguingly melodic.

The West Coast Noise System is powered by Synthrotek's Case Power Mini Yellow, which has the following amperage specs: +12v @1A; -12v @ 0.5A; +5v @ 1.5A


Sequence 8
MST Noise Sample and Hold / Track and Hold
Atari Punk Console
DIRT Filter
DLY Module
1U UniBuffer
1U Stereo Output Mixer
Read more
MRP:$1,102.08 SAVE 21%
coming soon $874.66
ADDAC System ADDAC611 Gotharman's VC Tube Filter Module (black faceplate)
Notes: This module was developed upon the Tubaz Filter which was released in 2014 by Gotharman but is currently no longer in production. We loved the original module so much that we officially licensed it's circuit and expanded it to feature several new functionalities.

Here's a paragraph from Gotharman regarding the original design:
"I designed it with the purpose of adding crunch, edge and distortion to my eurorack system. It is not an ideal bandpass filter, that cuts off all frequencies above and below the center frequency.
Because of its high drive, there are, in most cases, some bleedthrough of the harmonics, that should have been cut off. You might consider calling it a "Band Add" filter. The main purpose of it, was to add edge, not to be a perfect bandpass filter."

While everything he mentions is still true we believe he was being modest, It's a dirty, gritty, growling and whining monster which promises you some of the most peculiar filter sounds you'll ever hear.
However do not classify it as a "weird" distortion unit just yet because besides this hairy character it can be easily tamed (using lower volume levels) and then, with some care and intention from the user, it will transforrm itself showing it's feline purrrrr and cuddle sweet and caring, or like any good mut, showing up at night all happy, wet and dirty from a full dog's day and will lay down at your feet while wiggling it's tail howling as yawning just happy to be back home.

As such, standard volume principles do not quite apply to these units, the Audio Levels will go up to x2 amplification, Drive will go up to x11 and master outs go up to x2. The combination of these will cover all diferent qualities it can present. Overall sound can be distorted pre-Tube (raising input levels), in Tube (raising drive) or post-Tube (raising Out levels).
Higher Inputs and Drive will always be gritty, lower Inputs and Drive volumes together with higher Output levels will make the overall behaviour more mellow and closer to what a typical filter would behave like.

No standard expectations should be considered when acquiring these units, all of the tubes were built in the 70's and were bought from various sources, we always kept the premise that no tube was a bad tube (unless not really workinng) so due to each specific characteristics no module will sound exactly the same, making each unit particularly unique. This uniqueness will be particularly evident on their resonance/self-oscilating timbre as well as in their own microphonic qualities.

Regarding power and current draw, the module is designed using a low power tube, so it won't starve your eurorack power supply.

Tech Specs:
3.5cm deep
90mA +12V
60mA -12V
Read more
coming soon $348.77
EMW MIDI Thru 4 Module (black faceplate)
Notes: The EMW MIDI Thru-4 was designed to help users with multiple MIDI modules. It lets you take 4 copies of a MIDI signal that can used with any of our EMW MIDI-enabled oscillators.

Eurorack (3U) form factor - 8 HP width
Power consumption: +12V [10mA] / -12V [0mA]
Weight: 69g
Depth: 50mm
Read more
MRP:$104.96 SAVE 20%
coming soon $84.19
ADDAC System ADDAC301 Floor Control Module (red faceplate)
Cat: 776281
floor control module
Notes: While ADDAC were working on the new VC Stompboxes several expression pedals were tested and it became clear that most often, while playing a modular system, your hands are busy.
It's also normal to have an expression pedal lying around somewhere, so ADDAC have brought these back, cleaned up the dust and put them to good use.
This module allows the connection of any standard expression and sustain pedal.

The expression pedal action can be fine-tuned with Range and Offset knobs.
Range defines the voltage range (-10v, +10v).
Offset transposes the range by (-5v, +5v).
Two leds, plus and minus, monitor the CV Output
Positive and inverted output jacks.
The sustain pedal action will generate a gate signal on the gate output.
One led monitors this output.
The module also features a bus board +5v Adaptor, this will be able to provide +5v to any bus board.
This feature can be removed through a jumper on the back of the module.

. Width: 4 HP
. Depth: 4 cm
. Max current: 20mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
coming soon $76.53
EMW 300 Desktop Synthesiser
Cat: 775817
desktop synthesiser
Notes: The EML-300 was released as a controller or an expansion for the EML-200. It carries an aditional oscillator and have very interesting features that vastly expands the sound creation and controlling of the model 200. Although the original EML-300 has not been designed as a stand-alone instrument, it can do a pretty good job in several situations..
The good news is that our EMW-300 received an extra strenght that allows it to be a more atractive machine in many cases, thats because we implemented an automatic trigger to the Voltage Generator that turns this module on a 16-steps analog sequencer.
Read more
MRP:$1,192.61 SAVE 19%
coming soon $971.97
ADDAC System ADDAC702 Dual VC Filter Module (black faceplate)
Notes: Here's our first Voltage-Controlled Variable Filter, inspired by the original MS-20 filter.

This module features:

Two independent filters, a High-Pass and a Low-Pass with dedicated audio inputs and outputs.

Besides individual outputs the HP and LP are also sent to a voltage-controlled Mix between the HP and LP filters.

Both Cutoff and Resonance are voltage-controlled with dedicated cv attenuator pots.

Switch for selecting between normal cutoff behaviour and an adjustable Smooth circuit to simulate a vactrol behaviour for cutoff control.

Switch for setting filters Filters in Parallel (independent) or Series (HP > LP).

Inspired by the Oscar synthesizer we added a Coupling switch to tie the HP Cutoff control to the LP Cutoff control, in this case the LP cutoff controls act as an offset from HP setting.

Three position switch selects different resonance clipping paths: diodes / no clipping / leds.

Both filters features a post Distortion/Fuzz circuit that adds extra harmonics adds an even deeper growl or extra gritiness to it.

All audio outputs (HP, Mix, LP) feature a switch for choosing phase output, allowing additive or subtractive mixes.

Three Leds monitor the amplitude of the three outputs (HP, Mix, LP).
Read more
coming soon $403.43
2hp Pitch Module (black faceplate)
Cat: 766655
pitch shifter module
Notes: Time domain pitch shifter with flutter control.
Read more
MRP:$144.32 SAVE 17%
coming soon $120.27
4ms Row Power 45 Power Solution module For Eurorack Systems (black)
Cat: 785962 Rel: 27 Oct 20
Power solution module
Notes: Row Power is a clean, regulated, and protected power solution for Eurorack systems. Row Power 45 provides enough power for two to three typical Eurorack rows (typically up to about 312HP):
+12V @ 2.0A maximum, 1.5A recommended
-12V @ 1.4A maximum, 1.2A recommended
+5V @ 1.5A maximum, 1.2A recommended

Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying bus cables or the Bus Stick. For custom power systems, the Row Power 45 has a set of easily soldered holes for using large gauge wire or MTA156 connectors to connect to distribution bus boards.

Multiple Row Power modules can be powered from a single power brick by daisy-chaining with an inexpensive barrel cable. The Row Power 45 can also be daisy-chained to 4ms Company's Pod enclosures. Each power supply is independently regulated and protected for ultra-low cross-talk between rows/pods.

The Row Power 45 is compatible with the 4ms Row Power Shield. This device (sold separately) attaches to the back of the Row Power 45 and monitors the amount of current being drawn, as well as the voltages of the power rails. The information is sent over Bluetooth to be displayed on a phone or tablet.

Electrical and Mechanical Specifications

Module Size:
4 HP Eurorack format module

Power Output:
Maximum average load under normal conditions: +12V @ 2.0A, -12V @ 1.4A, +5V @ 1.5A
Maximum average load under any condition: +12V @ 1.5A, -12V @ 1.2A, +5V @ 1.2A
Powered by laptop-style DC power supply: 2.1mm barrel, positive center, 15V-20V.

Included with the Row Power 45:
16-to-16 pin power cable
2 M3 Knurlie screws
Read more
MRP:$199.42 SAVE 17%
coming soon $166.18
Erica Synths Fusion System II Synthesiser (UK plug)
Cat: 780750 Rel: 16 Sep 20
Fusion synthesiser
Notes: Vacuum tube based eurorack modular synthesizer for sounds of unprecedented pressure.

Erica Synths is one of the few manufacturers that use vacuum tubes in eurorack modules, and those, who are familiar with tube-based modules, know that tubes can push the sound to extremes or turn it deep, saturated and complete.

Erica Synths have come up with three new Fusion series modules - Fusion VCF3, Fusion Modulator (already available) and Fusion VCA/Waveshaper/Ringmodulator - to create the Erica Synths Fusion System II - a modular synthesiser for sounds of unprecedented pressure, unconventional modulations and creativity-inspiring patching. A 104HP system has 63 patchpoints for extensive experiments in sound design, all analogue signal and CV path; it's a system for those, who take sound design seriously.

Fusion System II includes:

Two Fusion VCO2s - fully analogue sound source with three simultaneously available waveforms, transistor-based suboscillator and detune function - two BBD delay lines that make frequency shifter that is mixed back to the principal oscillator in order to emulate two detuned VCOs. Tube crunch - distinct tube overdrive - is added on the top of the mix.

Fusion VCF3 - resonant 24dB/oct lowpass filter of unique design that combines vacuum tubes and vactrols, providing distinct, soft filtering. For more versatility a CV recorder, that records motion of the potentiometer, is incorporated in the module, so you can design advanced modulation patterns.

Fusion Modulator - complex, all analogue CV source that consists of several blocks - two EMS Synthi functionality inspired looping envelope generators with simultaneous unipolar (0V-10V) and bipolar (-5V-+5V), VCA, Noise generator and Sample&Hold.

Fusion VCA/Waveshaper/Ringmodulator - a modulation source based on two miniature pentodes that operates as VCA, waveshaper and ringmodulator. With two CVs applied simultaneously to different stages of the VCA, audio rate modulations, using ringmodulator as a waveshaper it becomes surprisingly versatile sound shaping module.

Fusion Delay/Flanger/Vintage Ensemble - a distinct multifunctional analogue effects module that combines BBD chip based effects with an adjustable tube overdrive in the delay output and a feedback path for extra thickness of the sound.

104HP One Row Skiff case (with or without a lid)

20 patch cables
Read more
MRP:$3,070.08 SAVE 19%
coming soon $2,487.33
Citronic CM25 Studio Condenser Microphone
Citronic CM25 Studio Condenser Microphone (studio condenser microphone)
Cat: 778591 Rel: 31 Aug 20
large diaphragm condenser microphone
Notes: Large diaphragm condenser microphone with cardioid polar response pattern for accurate reproduction of vocals and instruments in a recording or broadcast studio. All metal construction with a bespoke shock-mount and magnetic pop-shield included, ready to mount to a standard microphone stand or boom arm. Connection via XLR for high quality balanced audio output and phantom power from a mixing console or dedicated phantom power supply. Supplied with a 3m balanced XLR lead in a fitted aluminium transit case.

The box for this item contains :

CM25 condenser microphone
Fitted shock-mount cradle
Magnetic pop shield
3m balanced XLR lead
Aluminium transit case

Power supply: 30 - 48V phantom power (via XLR)
Construction: Zinc alloy body and steel grille
Capsule: 25mm: O nickel sputtered diaphragm
Output impedance: 2.2k Ohm
S/N ratio: 68dB (A-weighted)
SPL max.120dB (1kHz)
Lead length: 3m
Read more
MRP:$90.53 SAVE 31%
coming soon $62.31
Tangible Waves AE Modular FMOS FM Synthesis Module
Cat: 786477 Rel: 31 Oct 20
Synthesis module
Notes: FM synthesis for the AE!

The FMOS is a new digital oscillator that brings FM synthesis to the AE modular! It offers the basic FM synthesis with one oscillator and one modulator, running both with sine waves or triangle waves. The modulation depth and frequency ratio of the modulator can be set with a knob and additionally by CV control. If you want pure sine waves, this is for you too - simply set the modulation level to 0.

The module is based on a simple 8-bit microcontroller and an adapted design of Jan Ostman.
Read more
MRP:$53.79 SAVE 17%
coming soon $44.82
Nux Mighty Air Headphone Amplifier With Bluetooth
Nux Mighty Air Headphone Amplifier With Bluetooth (headphones amplifier with Bluetooth)
Cat: 778743 Rel: 31 Aug 20
Bluetooth headphone amplifier
Notes: Mighty Plug is a complete guitar or bass practice room that can fit in your pocket. Simply plug into your guitar or bass and connect headphones and you can play fully amplified guitar sounds along to your favourite tracks in complete silence. Inside this tiny device is a huge arsenal of amp models for guitar or bass, effects and acoustic models. Bluetooth connectivity lets you pair with a smart phone or tablet (search for "Mighty Plug") for playback of audio to jam to or for in-depth editing of the Mighty Plug amp and effect settings using the Mighty Amp app (downloadable from App Store or Google Play). No need to keep replacing batteries, as the Mighty Plug is rechargeable via the USB, which also serves as a computer interface for firmware updates and as a recording/playback interface. The Mighty Plug contains all you need for hours of practice, recording and sound exploration.

Battery: Internal rechargeable LiPo 3.7V, 1000mAh
Input impedance: 1M Ohm
Rated power: 2 x 125mW
Wireless connection: Bluetooth editing or audio playback
USB computer interface: Micro USB audio stream & recharging
Effects: 13 amp models, 20 IR presets, 19 effect models

The box for this item contains :

Mighty Plug headphone amplifier
USB to micro lead
Read more
MRP:$77.41 SAVE 31%
coming soon $53.57
Nux Optima Air Acoustic Simulator & IR Loader Pedal
Cat: 778748 Rel: 31 Aug 20
acoustic guitar simulator/IR loader pedal
Notes: The Optima Air pedal is a programmable digital modelling acoustic guitar simulator for electric players. Plug in your electric guitar and morph it into any of 15 internal acoustic guitar models at will. An Impulse Response (IR) loader enables you to capture the tone profile of your favourite acoustic guitar and store it as a model that can be played from your electric guitar. To enhance the acoustic tone, the Optima Air is furnished with a foot-switchable studio quality preamp with 3-band EQ and a digital reverb section to generate ambience. The Optima Air also has an audio streaming USB interface providing, which can be used as a recording device and the USB can be used for remote editing via software which is downloadable for PC or Mac computer. Inputs and outputs include standard jack in and out, a D.I. XLR output, send/return effects loop, headphone output and aux line input for a myriad of connection possibilities. Optima Air is the acoustic guitar in a pedal for electric players either on stage or in the studio.

Power supply: 9Vdc, 500mA, negative centre (not supplied)
Sampling format: 24-bit, 48-kHz
Internal programmes: 15 models, 9 preset patches
DI output: XLR
USB computer interface: Micro USB port

The box for this item contains :

Optima Air pedal
Read more
MRP:$208.61 SAVE 17%
coming soon $173.84
ACL Mini MIDI USB MIDI To CV Converter Module
Cat: 776679
MIDI to CV converter module
Notes: The ACL MINI MIDI is a USB MIDI to CV convertor module in a small module.

It uses MIDI CLOCK, START/STOP, one selectable MIDI Controller and a monophonic MIDI Note to be converted to Eurorack compatible CV, GATE and clock signals.

It can be used as USB MIDI to CV interface by connecting to your computer via the USB B port. A Class Compliant USB MIDI device can be connected to the USB A port.
Read more
MRP:$352.93 SAVE 17%
coming soon $294.10
Sound Machines BI1 Brainterface (Desktop)
Sound Machines BI1 Brainterface (Desktop) (brainwave to synthesiser interface module)
Cat: 777372
brainwave to synthesiser interface module
Notes: Soundmachines BI1brainterface is an exploration and performance tool for musician, producers, actors, body performers and coreographers who wants to connect their mental and emotional sphere directly with the performance.

The BI1 doesn't require the use of a computer, and brings immediacy and easy of operation in this upcoming technology.

By stressing the capabilities of the Neurosky MindWave Mobile headset, the BI1brainterface is developed to connect your mental status to your gear, in the most easy and open way possible.

Whenever you have an analog modular synthesizer or a MIDI sound generator, you can influence on sounds, sequences, timbres and drive the performance with an added controller, the most sophisticated: you.

Attention and Meditation are the most 'robust' and repeatable variables that you can count on. But also the EEG power spectrum bands (Alpha, Beta, Gamma, Delta and Theta) are available to control other eight sound/light/video characteristics. As a bonus, the toolbox has a variable threshold to generate a 'trigger' based on your facial muscular activities (i.e. blinking or grin).

In the studio or in a live environment, weared by a dancer or an actor on stage, or just use it to relax yourself and raise your self-consciousness about focus, relax and meditation.

Bio feedback is another field of operation for the BI1brainterface, reaching applications such as the several described above and more.
Read more
MRP:$589.09 SAVE 19%
coming soon $479.97
Sound Machines UL1 Uloop Module (black edition)
Cat: 777324
sampler/looper module
Notes: A small, gritty, fun performance sampler and looper.

At 4hp it's the new 'utility' module!

Here is a diminitive 4hp module that could bring you lots of fun and creative momentum. A simple sampler and looper that behave well with your modular and give back to you a lo-fi sampling experience!

Both Manual and CV/trigger modes are possible. You can control the sample and playback frequency, trigger the recording or the playback and and there's also a 'beatrepeat' mode.
Read more
MRP:$150.88 SAVE 16%
coming soon $126.82
SynthRotek LPG Low Pass Gate Module (black faceplate) (fully assembled)
Notes: The LPG is a West Coast Synthesis staple! The dual Low Pass Gate creates organic percussion timbres, paving the way for sonic exploration with a Buchla/Subotnick vibe.

The LPG has two low pass gates in one module. Its unique non-linear qualities emulate percussion timbres like congas, bongos, plucks, etc. The LPG is vactrol based, which creates natural-sounding decays. When the CV input is pinged by short/fast envelopes, it results in more organic sounds like bongos. The slide pot functions in two ways: when the the CV input is not patched, it attenuates/mixes the audio signal. When the CV jack is patched, it attenuates the output level and changes the timbre of the audio signal.

Each LPG channel can be used as a VCA. VCA mode bypasses the low pass filter and resonance and doesn't color the sound of your input audio. The vactrol gives the VCA a living, breathing, non-linear response.

A number of vactrols were tested for this module, and the pre-tested NSL-7053 yielded the most positive results. The NSL-7053 has a slower response and a more exponential response curve. The VTL5C4 has a slightly faster response and a more linear response curve. Vactrols have a lot of variance, so even if you use the same vactrols for both channels, each channel may sound a little different. But the LPG will work with a number of different types/brands, including dual vactrols. In fact, each channel can be built with a different set of vactrols. (Note: VTL5C3 and VTL5C3/2 vactrols are not recommended in the LPG.)

Width: 4HP
Depth: 57mm
Current draw:
+12V: 45mA
-12V: 45mA
Read more
MRP:$157.44 SAVE 19%
coming soon $127.91
ADDAC System ADDAC111 Ultra .WAV Player Module (red faceplate)
Cat: 776121
.wav player module
Notes: The ADDAC111 ULTRA .WAV PLAYER is the long awaited upgrade to the praised ADDAC101 .WAV PLAYER.

While keeping all functions of the original, there's more dedicated controls as well as a few new functions.

For this version, Micro SD Cards were used- this decision was made in order to help the hardware construction and make it only 3cm deep.

An Expansion module, ADDAC111B, was also created to allow users to recall the first 8 files through dedicated trigger signals. This allows sequencing of files.

The Loop Size, Start Point and Sample Rate defines how the loop is played.

Loop Settings defines if sample is looping or playing only once.

File Access if it advances to the next or previous file.

The VCA section controls the overall volume of the module.

And finally the Envelope Follower generates a CV voltage related to the amplitude of the audio signal pre-VCA.
Read more
coming soon $598.05
EMW Multi Low Frequency Oscillator Noise Module (black faceplate)
Notes: The EMW MULTI LFO-NOISE is another very interesting module: it has a selection of 8 waveforms, including noise, in order to maximize the modulation capabilities of your modular synthesizer setup. When used in conjunction with another LFO (via a DC mixer), the resulting waves can be very varied and random.

Read more
MRP:$90.53 SAVE 19%
coming soon $73.25
EMW Fixed Filter Bank Module (black faceplate)
Cat: 774768
filter bank module
Notes: The EMW Fixed Filter Bank adds color and different shades into the sounds. It contains 8 bandpass filters used to attenuate or accentuate frequencies throughout the audio range.This module can easily modify the waveforms produced by an oscillator, creating very interesting and dynamic variations. When the controls are djusted to accentuate the frequency range, resonances are produced, resulting in very unique sounds. This is an essential module to achieve more flexibility and exclusive timbres with your modular setup.

Read more
MRP:$173.18 SAVE 19%
coming soon $139.95
Artículos del 51 al 100 de 523 en la página 2 de 11
«  1  2  3  ...  11  »


Coming Soon: Studio Equipment