Juno Daily

Music and tech news, interviews, features, reviews and more.

Visit Juno Daily

100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.  Visit Juno DJ

Coming Soon: Studio Equipment

Inicio  Coming Soon  

Studio Equipment

Options
Artículos del 101 al 150 de 243 en la página 3 de 5
«  1  2  3  4  5  »
FORTHCOMING
Sound Force Dual ADSR Attack Decay Sustain & Release Module With CV
Cat: 804299
 
ADSR envelope generator module
Notes: The SoundForce Dual ADSR is a feature-rich envelope generator with full CV control of each stage.

The Dual ADSR is powered by a 120Mhz ARM Cortex-M micro-controller with a built-in DAC. This modern chip allows for extremely smooth envelopes curves even at high frequencies. Thanks to digital technology, the implementation of CV control in software makes the hardware more simple thus economical, and allows for different time ranges and 2 curve responses (LIN/EXP).

The SoundForce Dual Filter features 2 identical envelope sections, one on the top and one on the bottom. Each section has 4 manual sliders to control each stage of the envelope. The CV input signals are added to the manual sliders position allowing you to modulate the ADSR curves with external CV sources.

The ADSR curve of the Sound Force Juno 106 was replicated and is available in time range M in combination with the EXP response. Please note that the attack phase is linear in that mode to model the Juno ADSR faithfully.

An digital "end of" output can trigger at the end of a chosen ADSR stage, either end of attack, end of decay or end of release, according to the position of the respective toggle switch.

Thanks to cycle mode you can create LFO-like waveform without an input GATE signal, but also generate interesting cycling envelopes.

The Dual ADSR has 3 time ranges:

Attack
S: 0.2ms to 1s
M: 1m to 3s
L: 9ms to 60s

Decay
S: 0.5ms to 2s
M: 2ms to 12s
L: 30ms to 30s

Release
S: 0.5ms to 2s
M: 2ms to 12s
L: 30mss to 30s

Specifications:
- 20HP
- Depth: 38mm (including power connector)
- Power: +12V 85mA, -12V 10mA
- GATE & RE inputs range 0V or 5V
- OUT range 0V to 10V
- INV range 0V to -10V
- EO range 0V or 5V
- CV inputs range -5V to 5V
Read more
MRP:$239.44 SAVE 17%
coming soon $199.52
FORTHCOMING
Tenderfoot Electronics SVF-1 State Variable Filter Module
Cat: 805888 Rel: 01 Feb 21
 
State variable filter module
Notes: The new SVF-1 from Tenderfoot Electronics is a great sounding state variable filter with voltage controlled cutoff and resonance. The SVF-1 self-oscillates when the resonance is turned up and has a 1V/octave input for use as a sine wave VCO.

The resonance circuit includes a Q control, a drive control, and a button to press if you're feeling less polite and really want to push the resonance beyond its limit and get it sounding dirty! The Q control is also controllable via a CV input jack.

All outputs are available simultaneously:
Low Pass
Band Pass
High Pass
Notch

A tonne of versatility from a filter in 8HP.

53 mA +12V
53 mA -12V
0 mA 5V
21 mm deep
Read more
MRP:$217.54 SAVE 21%
coming soon $171.01
FORTHCOMING
LA67 WFM Oscillator Module
Cat: 806152 Rel: 01 Feb 21
 
Oscillator module
Notes: An analog VCO with a unique wave shaping circuit. Based on the 1970s Kobol synthesizers, the WFM output provides a continuously variable wave shape from triangle to saw to modulated pulse, with many interesting points in between. Voltage control over wave shape and output amplitude allow for wide timbral variations.

Technical Specifications

8hp
35mm depth
Current draw: 65mA/65mA +12v/-12v

Reverse power polarity protection


Read more
coming soon $322.66
FORTHCOMING
AniModule Quad Comparator Module
AniModule Quad Comparator Module (CV modulation / logic / comparater / utility / quad synth module)
Cat: 794399
 
Quad comparator module
Notes: Simple quad comparator based around the LM339.

It will take your Voltages and turn them into Logic On.

When your signal is higher than the threshold the Gate goes high and the NOT Gate goes low.
When your signal is lower than the threshold the NOT gate goes high and the Gate goes low.

You can set the threshold anywhere from about -10V to +10V.

Input 1 is buffered then normalled to JackSwitches 2->4. So you could send an LFO in to Input 1, set different thresholds for all the inputs and have all the gates/NOT Gates fire at different points from the same LFO.

115 mA +12V
95 mA -12V
29 mm deep
O 5.00 (1 Votes) Average Rating
Read more
MRP:$195.65 SAVE 17%
coming soon $163.03
FORTHCOMING
Transient Modules 7J Compact Joystick Module
Transient Modules 7J Compact Joystick Module (attenuator/controller/CV modulation/expression/polariser synth module)
Cat: 804248
 
Compact joystick module
Notes: Transient Modules 7J Joystick Module

25 mA +12V
15 mA -12V
0 mA 5V
38 mm deep
Read more
MRP:$194.28 SAVE 17%
coming soon $161.90
FORTHCOMING
Transient Modules 8S 8 Step Sequencer Module
Transient Modules 8S 8 Step Sequencer Module (sequencer/randon synth module)
Cat: 804251
 
8-step sequencer module
Notes: The 8S is an 8 step sequencer in 8 HP with control over some parameters of the sequence as reset, hold, random step and direction. The inputs have been designed to work with clock related signals like triggers or gates but any type of CV signal can be used. The output signal path is completely analog and its range can be set to unipolar (0 to +5 volts) or bipolar (-5 to +5 volts) via jumper on the back of the module.

Technical specifications:

8HP

38 mm depth

Consumption: +12V: 25mA ; -12V: 5mA
Read more
MRP:$181.97 SAVE 29%
coming soon $129.97
FORTHCOMING
AniModule Line_Amp Module
AniModule Line_Amp Module (multiple / preamp / utility / dual stereo / external synth module)
Cat: 793793
 
Buffered multiple module
Notes: Check out AniModule's Line to Synth Level Converter.

2 Channels of 1 in <--> 2 Out.

Each channel is designed to multiply your input by *3 to boost your Line Gear / Tablet / Phone so you can integrate audio OR Control Voltages from your auxiliary systems.

Each channel's input is designed with Line Level gear's input impedance in mind.

Perfectly compatible with Synth Output Impedances, but the standard Synth Input Impedance is higher than Line level equipment is expecting.

Don't need to amplify your XPhone right this minute? Never fear! Just Hit the Switch!

This module won't sit unused in your cabinet breeding resentment and dust bunnies.

Hit the switch and that channel becomes a normal 2 HP Unity Gain Buffered Mult.

Only need one channel of each? It's YOUR Choice!
Read more
MRP:$113.56 SAVE 17%
coming soon $94.62
FORTHCOMING
AniModule M1xXOR Module
AniModule M1xXOR Module (mixer / sequencer / switch synth module)
Cat: 793792
 
CV sequencer module
Notes: The Animodule M1xXOR is the Jon Snow of Animodule's product lineup. Described as a "bastard progeny" and "unholy union" by its creators, the module is an amalgamation of the V9a, VCSS, XXX_OR, and MixMan modules. Each of the module's channels, as well as the mixer, can be used independently of the sequencer, enabling a variety of self-contained and inter-module uses. When used independently for self-contained functionality, the module can function as a 4-channel DC-coupled mixer or as 4 individual channels of gated attenuation.

How It Works:
-Signal goes in to Channel Input (it's DC connected so you can use Audio OR CV).
-Signal is attenuated via Channel Attenuator.
-Signal is allowed to pass through to Individual Channel Output AND Mixer Output IF Gate Input is High OR Switch is depressed.

Sequencer:
-Clock Pulse High in to Clock Input Moves Sequence forward 1 Step.
-The Channel that the step is On will be open
-CV can be used to control the Sequencer via the CV Input.
-There is a resolution of 5 steps (4 channels and a 0 step allowing for all channels to be cleared from the Sequencer).
-There is an attenuator and offset to help properly scale and position your CV Input.
-CV Input is expecting 0V to +5V, but with the Attenuator and Offset will easily work with -/+5V.
-Clock and CV maybe used in tandem resulting in some mind melting rhythms!
-In that case the Clock will step forward 1 step from it's current position (unless it's on step 4 in which case it will roll over to step 1)
-The Clock used in conjunction with the CV will bitshift the sequence to the left, incrementing the static position of the step counter by 1 (wrapping around to step 1 after step 4).
-Fer' Instance, 2 Clock counts and CV is on 0. Step will be on Channel 2
-Gate High in to Reset will reset Clock counter to step 1 OR if Clock Input is being used in conjunction with the CV Input the reset will clear the Clock Counter and return the step to where the CV indicates it should be without any BitShifting

*Gate Input / Switches in conjunction with Sequencer:
-The Sequencer and the Gate Input / Switches combine in a XOR gate. If one is High and the other is not, that channel will be open. If BOTH are High, that channel will be closed.

Despite the lengthy description, the M1xXOR is very intuitive (and unbelievably Fun!) to use.
Each Channel (and the Mixer) May be used independently of the Sequencer.
So if you're not in the mood for Rhythmic Insanity You still have a gateable 4 Channel DC-Coupled Mixer AND/OR 4 independent and gateable channels of Attenuation.
You will NEVER just have it filling space in your cabinet.
You will find a use for it in EVERY patch!

All this in 8HP with a depth of 33mm (from rear of Front Panel).
Read more
MRP:$250.38 SAVE 17%
coming soon $208.64
FORTHCOMING
Patching Panda Punch 3 Dynamic VCA-Decay & AM Module
Cat: 804373
 
VCA-decay & AM module
Notes: Punch is the ultimate VCA-DECAY module for Eurorack

Specially designed to generate dynamic percussive sounds but also capable of basslines, leads, envelopes and more. The VCA has a built in voltage controlled Decay envelope that can be turned from smooth to more aggressive exponential responses and can be activated with triggers, gates or cv's.

Punch features two modes per channel to play, with a dedicated switch control: "vintage style drum machine mode" and "dynamic cv mode"

Punch is capable of creating AM sounds with control voltage on the "amount"

Each envelope can be inverted via dedicated switches on the front panel.

If you use an inverted envelope alongside the accent input you can create ducking effects like side-chain compression..

INSTALLATION:
* Disconnect your synth from the power source.
* Double check polarity from the ribbon cable, unfortanetly if you damage the module by powering in the wrong direction it will not be covered by the warranty.
* After connecting the module check again you have connected the right way, the red line should be on the -12V.
Read more
MRP:$223.02 SAVE 17%
coming soon $185.84
FORTHCOMING
Patching Panda Vibrazum V2 Triple Multimode VCF Module
Cat: 804368
 
Triple multimode VCF module
Notes: Versatile triple multimode VCF capable of subtle to extreme tone shaping without losing the performance availability.

The three channels have dedicated outputs, as well as a mix output.

Multiple combinations of frequencies drawings are possible.

It was designed to create a movement to the sound thanks to the individual frequencies voltage control inputs.

Each channel is able to sweep through all the frequency spectrum.

A dedicated shift control with attenuverter cv input is able to swap all 3 filtres at the same time.

The Vibrazum shines at high feedback with 24dB slope, the resonance is well compensated and performative, even taking it to the extreme will not go out of control.

It sounds very “creamy” and full of rich harmonics from a gnarly tone-­shaping tool of sonic destruction, vowel robotic sounds, acid basslines, resonant percussive sounds and more…

Simple layout without compromising the wide range of sonic possibilities.

Specs:

Width: 14hp
Depth: Skiff-friendly
Current draw: +12V: <65mA, -12V: <68 mA
Read more
MRP:$339.31 SAVE 17%
coming soon $282.75
FORTHCOMING
Patching Panda Copycat Buffered Mult Module (with bicoloured LEDs)
Cat: 804381
 
Dual-buffered mult module
Notes: 2hp dual Buffered Mult features 2 channels of 3 outputs or 1 channel of 6 outputs if nothing is connected to the second input, it has 2 bi-colour led showing positive and negative voltage.

2hp buffered mult

DC coupled

2 inputs

Bi-colour led showing positive (green) and negative (red) voltages

Power consumption 20mA@+12V, 28mA@-12V

Skiff friendly

(This is not a precision buffered multi)
Read more
MRP:$97.14 SAVE 17%
coming soon $80.94
FORTHCOMING
AniModule TikTok Module
AniModule TikTok Module (clock modulator synth module)
Cat: 793800
 
Clock divider & multiplier module
Notes: The TikTok is a 4HP Clock Divider/Multiplier.
It has Divisions and Multiplications of:
*//2
*//3
*//4
*//5
*//6

There is a Clk Input and a Reset Input.
Both are buffered with an opamp based comparator circuit.
They are looking for approximately +1.1V on a rising edge.
This means that you are not constrained to gate (pulse) signals to trigger them.

The Reset input resets your divisions clock counter to 1

There is a switch to select Mathematical or Musical divisions.

The Multiplication Outputs 25MS Trigger pulses.
The Division Outputs are on as long as your Clock source.

Avg Current draw:
40 mA
-9 mA
Peak Current Draw:
80 mA
-17 mA

Width = 4HP
Depth = 38mm
Read more
MRP:$201.13 SAVE 17%
coming soon $167.59
FORTHCOMING
Livestock Electronics Felix Buff Mult Module
Livestock Electronics Felix Buff Mult Module (attenuator/controller/dual & stereo/multiple/polariser/utility synth module)
Cat: 802751
 
Buffered multiple module
Notes: What if you could use one modulation source and adjust it for multiple parameters, create a bus to send audio sources to effects, or even create a macro controller?! A certain cat has got your back!

Felix is a 1:6 or 2x1:3 buffered multiple with an attenuator or attenuverter per output. It is great for distributing a source to different parameters and controlling the gain and/or direction for a specific parameter.

But it can also be used for audio, which makes it great for creating auxiliary busses.

Finally when no source is given the module can be used as a stable voltage distributor. Really useful for creating DC offsets or macro controls!

Width: 6HP

Depth (Back): 20MM

Depth (Front): 15MM

Weight: 65g

Max @ +12V: 32mA

Max @ -12V: 30mA
Read more
MRP:$119.03 SAVE 21%
coming soon $94.62
FORTHCOMING
Arturia V Collection 8 Legendary Keyboards Reinvented Software (boxed)
Cat: 805017 Rel: 31 Mar 21
 
Virtual keyboard software
Notes: V Collection 8 combines beautiful pianos, immense organs, earth-shaking analog synths, essential digital music makers - the origins of iconic sound, brought across the threshold into the virtual realm with unmatched modeling technology. 28 instruments, timeless in sound, unique in design, brought back to life for your creative empowerment.

V Collection 8 is the continuation of this incredible story. These instruments aren't just faithful emulations; they've been enhanced with contemporary features fit for the 21st century. Sounds that surpass their hardware ancestors. A workflow that meets modern music making requirements. An elevated musical experience guaranteed to spark your inspiration.

NEW IN V-COLLECTION 8:

Jun-6 V: Jun-6 V channels the pure analog spirit of the Juno series, the DCO classics that brought polyphony to the masses. Its colossal & creamy sound remains awe-inspiring to this day - optimized and enhanced to keep up with modern creative needs.

Vocoder V: takes the iconic 16-band vocoder and retrofits it with advanced synth, sampler, and modulation capabilities. From Daft Punk's signature robot vocals to cutting-edge formant textures, Vocoder V offers a harmonically-rich voice that truly speaks for itself.

Emulator II V: is based on the multitimbral sampling icon favored by everyone from Depeche Mode to Trent Reznor. It's the perfect dusty lo-fi sampling toolkit, combining the old-school digital grit that you love with the cutting-edge creative flexibility that you need.

OB-Xa V: brings the immense analog power of the 'Jump' synth from the '80s charts into the modern music-making era. Faithful to the sound of the original and supercharged with new features, OB-Xa V will take you for a wild sonic ride.

Jup-8 V4: A big update! Fat, yet airy and crystal clear. This analog titan is now bigger than ever, courtesy of complex modulation, dynamic FX, dual step-sequencers, and much more.

Stage-73 V2: The soulful sounds of the Rhodes electric piano, brought back to life with stunning realism, with an update. State-of-the-art physical modeling offers unmatched authentic feel and customization, with a pedal & amp rig and advanced dynamic tweaks to help you find your own EP voice.

Analog Lab V: a whole new layout, easier preset navigation and powerful new performance modes for the studio and live on stage.

In app tutorials: helps you get making sounds in no time at all.

Streamlined preset browsing: a new browser to accurately and quickly find the sounds you have in mind.

V Collection 8 is designed to not just cover all of your synth & keyboard sound requirements. It's built to be intuitive, accessible, and enjoyable too, designed by passionate musicians, producers, and engineers who understand the importance of a fluid music making process.

This is more than a selection of legendary instruments. It's an array of sonic tools designed to work in perfect harmony, paving the way for an unhindered creative process that'll inspire at every turn.

Take time to get familiar with each instrument with newly-integrated & easy-to-follow tutorials, covering every component and top-tip in detail.

Every instrument has 4 macros for fast & intelligent sound tweaking, so you can explore its sonic potential instantly without extensive patching.

Filtering, finding, and organizing your perfect sounds is easier than ever; the new browsing interface lets you fully customize your tonal palette.

Every instrument in V Collection 8 features the same intelligent preset browser. Instantly find the perfect sound, or experiment with something new. Search by name, style, or browse categories; add sounds to your favorites for instant recall; add comments and set up your own playlists; finding your sound has never been this easy.

Want to change it up? Each instrument gives you access to the Arturia Sound Store, a huge collection of free and premium Sound Banks that's updated every month. From genre-themed packs to artist tribute releases, the Sound Store has all the inspiration you'll ever need on tap.
Read more
MRP:$737.46 SAVE 32%
coming soon $500.53
FORTHCOMING
Magma Solid Blaze Pack 120 DJ & Production Equipment Backpack
Cat: 807949 Rel: 30 Apr 21
 
DJ/production equipment backpack
Notes: A true packing backpack designed to carry what you need.

Made from 120 recycled 0,5l (16oz) plastic bottles, the SOLID BLAZE PACK 120 is an all-purpose travel backpack with modular interior layout crafted for versatility. Whether you are hauling DJ or production gear, photo or video equipment, or other electronics, the SOLID BLAZE PACK 120 enables you to easily and conveniently organize your gear. The spacious and expandable main compartment features removable EVA padding and multiple dividers for ultimate packing experience. The customizable padded interior ensures your gear travels with you safely. Loads of additional compartments, pouches and zippered pockets offer intuitive accessory management and quick access to your belongings. The SOLID BLAZE PACK 120 is crafted from only the highest quality materials, such as its water-repellent RPET 900D shell and YKKr AquaGuardr zippers to protect your laptop, tablet, timecode records and other expensive gear from the elements. Travel comfortably knowing your gear is safe inside the MAGMA SOLID BLAZE PACK 120.

FITS:

Pioneer DJM-S11
Pioneer DJM-S9
Pioneer S-1000
Pioneer Toraiz SP-16
Rane Seventy-Two
Rane Seventy
Rane Sixty-Two
Reloop Elite
Akai MPC Live
Akai MPC Live 2
Ableton Push 2
Roland SP404
NI Maschine MK2
NI Maschine+
Denon Prime Go
12" vinyl
Rodecaster Pro
Laptops up to 17"
Camera gear etc.

Outer dimensions: (H/B/T): 52 x 35 x 23-26*cm / 20.5" x 13.75"x 9"-10.25"* (*extended)

Inner dimensions: 45 x 32 x 14 -17* / 17.75" x 12.5" x 5.5"-6.75"* (*extended)

Weight: 2,3 kg / 5lb
Read more
MRP:$301.00 SAVE 17%
coming soon $250.83
FORTHCOMING
2hp 12 Inch Green Patch Cables (bundle of 5)
2hp
Cat: 805954 Rel: 31 Mar 21
 
Pack of 5 12" green patch cables
Notes: Plug in and play with the 2hp Patch Cables! Available in multiple sizes and bundles, these 2hp color-certified green cables will bring the pop to your system in a sleek, tiny package. Designed to work with 2hp's tiny modules, the 2hp Patch Cables will comfortably fit into the most crowded corners of your system, big or small!

Sleek, tiny package

Lunchbox cables
Read more
MRP:$16.42 SAVE 17%
coming soon $13.67
FORTHCOMING
2hp 8 Power Slots Flying Bus Cable
2hp
Cat: 805963 Rel: 31 Mar 21
 
Flyring bus cable with 8 power slots
Notes: Looking to expand your Lunchbox? Look no further! 2hp's Flying Bus Cable is the perfect addition to your ever expanding modular meal. Carrying 8 power slots, expanding your system is a breeze by simply inserting the Flying Bus cable into the extra slot of your Lunchbox power. Did somebody say seconds?!

Flying Bus Cable

8 Slots

Malleable for easy cable management

Double your Lunchbox's modular possibilities
Read more
MRP:$19.15 SAVE 17%
coming soon $15.95
FORTHCOMING
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (90cm, blue, pack of 3)
Cat: 801543 Rel: 28 Feb 21
 
Pack of 3 3.5mm blue patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
coming soon $7.70
FORTHCOMING
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (60cm, red, pack of 5)
Cat: 801520 Rel: 28 Feb 21
 
Pack of 5 3.5mm red patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
coming soon $9.41
FORTHCOMING
ALM Custom 3.5mm Male Mono Eurorack Patch Cables (30cm, blue, pack of 5)
Cat: 801508 Rel: 28 Feb 21
 
Pack of 5 3.5mm blue patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
coming soon $8.84
FORTHCOMING
UDG Ultimate Straight USB 2.0 Type C-B Audio Cable (1.5m, white)
UDG
Cat: 795652 Rel: 31 Jan 21
 
USB 2.0 C-B cable
MRP:$16.42 SAVE 17%
coming soon $13.67
FORTHCOMING
Erica Synths Pico EF Envelope Follower Module
Cat: 809147 Rel: 30 Apr 21
 
Envelope follower eurorack module
Notes: The Erica Synths Pico Envelope Follower features a preamp with +40dB gain, enough to boost even guitar and dynamic microphone signals for use in a modular system, which also can serve as a nice overdrive effect, envelope output with adjustable attack time and a gate output with adjustable threshold. The Pico E.F. will be useful as a preamp, overdrive unit, for controlling VCFs to sync a beat with a drum track, as well as to create acid bass lines, to synchronize a modular system to the external instruments, and for other creative and experimental applications.
Read more
MRP:$136.82 SAVE 17%
coming soon $114.01
FORTHCOMING
Tangible Waves AE Modular 2-Row 12x2 Narrow Bamboo Wood Case
Cat: 809665 Rel: 30 Apr 21
 
12x2 Eurorack case with wooden front and sides
Notes: This is a variant of the standard red / black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.



Read more
MRP:$57.46 SAVE 17%
coming soon $47.87
FORTHCOMING
Electrosmith Micro USB To USB Type A Cable
Cat: 792042
 
USB cable
Notes: Flash your Daisy, send MIDI, and more with the Electrosmith Micro USB cable! This braided cable is built to last, and is easily distinguishable between other workbench cables due to its orange finish. Flashing programs just got brighter with the Electrosmith Micro USB cable.

. Micro USB to USB Type A
. Protected with braided cable enclosure and silicon supports.
. Length: 36"
Read more
MRP:$15.05 SAVE 17%
coming soon $12.53
FORTHCOMING
Soma Laboratory Pulsar-23 Dust Cover
Cat: 809219 Rel: 30 Apr 21
 
Clear dust cover
Notes: Dust cover for Soma Laboratory Pulsar-23
Read more
coming soon $71.82
FORTHCOMING
Soma Laboratory Pulsar-23 Cotton Dust Cover (white)
Cat: 809212 Rel: 30 Apr 21
 
White cotton dust cover
Notes: Dust cover for Soma Laboratory Pulsar-23
Read more
coming soon $18.24
FORTHCOMING
Old Blood Noise Blackcap Dual Asynchronous Harmonic Tremolo Pedal
Cat: 806604 Rel: 31 Mar 21
 
Harmonic tremolo effects pedal
Notes: Old Blood Noise is now offering a harmonic take on their Whitecap dual asynchronous tremolo as a full member of the OBNE roster. The Blackcap retains the analog tremolo side of the original and takes the highly functional digital tap side into the realm of harmonic tremolo. Where before it turned your volume up and down, now it crossfades between your highs and lows. Mixed in parallel or series with the amplitude modulating tremolo, it's a new aural experience.
Read more
MRP:$272.27 SAVE 17%
coming soon $226.89
FORTHCOMING
Joue Water Drum Pad For Board Play Modular MIDI Contoller (blue, green)
Notes: Drum pad- Water colour scheme.
Read more
MRP:$47.89 SAVE 17%
coming soon $39.90
FORTHCOMING
IO Instruments CARPO Three-Channel Headphone Amplifier Module
Cat: 795944 Rel: 31 Jan 21
 
Headphone amplifier module
Notes: All channels support headphones with 16 - 600 Ohm impendances.

Superb sound with low distortion and great low end.

Linkable channels (B to A and C to A).

All inputs with multiples, ie feeding different mixer channels.

Mono input is normalized to stereo.

Protected with relais, assuring soft starts and DC protection for your headphones (> +/- 10V input)

Width: 12 HP
Read more
coming soon $152.77
FORTHCOMING
Dreadbox Komorebi Flanger & Chorus Pedal
Cat: 809385 Rel: 30 Apr 21
 
Chorus/flanger effects pedal
Notes: Huge chorus-flanger. Take your music to infinity. The fully analogue Dreadbox Komorebi Chorus-Flanger Pedal gives you a huge array of sound design possibilities. This powerful pedal can add some serious impact to your sound.

It doesn't matter if you're playing bass, guitar, synths, or even if you want to hook it up to your modular Eurorack system. The Komorebi is ready to go. Sprinkling its beautiful effects over anything it touches.

From a slight pinch of flange to add some movement to your bass lines, or a lengthy chorus effect to treat your pads and chords to a final touch of space-age wideness. It's a guitar pedal but not as you know. Komorebi works with everything.

Current draw: 100mA
Read more
MRP:$231.23 SAVE 17%
coming soon $192.68
FORTHCOMING
AniModule AnVilope Module
AniModule AnVilope Module (clock generator / envelope generator / LFO synth module)
Cat: 794381
 
Envelope generator module
Notes: A Simple, Affordable, 4HP, Analog Envelope Generator.

Attack, Decay, Release... Simple.

- Envelope Out 0V to +7V
- Loop function so you can use it as a Variable Wave-Shape LFO / Timer
- Inverted out that goes from +7V to 0V

Function:
When the gate is High the envelope will rise and cycle through it's phases.
When gate goes low again the envelope will revert to the release phase.

If the Gate is longer than the ADR phases, the decay will play out then go to release and the envelope will end after the release.

Sprinkle them all over your system!

4HP Depth : 28mm
Read more
MRP:$117.67 SAVE 17%
coming soon $98.05
FORTHCOMING
Gamechanger Audio Plasma High Voltage Distortion Rack Unit
Cat: 807417 Rel: 15 Feb 21
 
Distortion rack unit
Notes: The PLASMA RACK is a 1U sized high-end audio effects unit designed for professional and studio use.

At its heart is the unique High Voltage Distortion concept - a brand new way of analog signal processing developed in 2018 by Gamechanger Audio.

By using a High voltage step-up flyback transformer, PLASMA RACK turns your instrument's signal into a rapid series of electric discharges in a Xenon-filled tube. These powerful discharges (up to 5500 Volts) then get picked up by a specially designed electromangatec receiver and turned back into audio-level signal. This process results in a large amount of punishingly heavy distortion, and also saturates the sound with a wide range of harmonics and overtones.

The harmonic artefacts, created as a byproduct of the high-voltage discharge are uncommon in traditional signal amplification, and therefore PLASMA distortion is unlike anything you have heard before.

The way PLASMA Rack reacts with different instruments and sound sources simply cannot be recreated with any other analog machine, plugin or by digital sound modeling.

3 BAND EQ

Gives you more and control over key PLASMA frequencies.
(10Hz, -20 to 20 dB LP Shelving Filter; 600Hz, -6 to 6 dB; 20kHz, -10 to 10 dB HP Shelving filter)

INPUT GAIN CONTROL

Can be used to fine-tune the PLASMA RACK for any type of input signal (adjusting to different pickups etc.)
(Preamp gain range -26dB to +12dB )

SUSTAIN MODE

Built-in adaptive compressor that lets you prolong the PLASMA Tube's output at Low-Voltage settings.

The resulting effect is like a long electrical sputter and is quite unpredictable and extraordinary.

OVERSATURATE MODE

Analog Octave up / Overtone effect achieved byoverpowering the PLASMA Tube.

This gives note attacks some serious Octavia-style upper harmonics, and also makes the whole sound extremely intense.

CLEAN GATE MODE

Use the PLASMA Tube's gating effect on any CLEAN Signal without the added Distortion.

Works great on all percussive instruments, as well as breaking up heavy reverbs and creating "bit-crush" type effects, but using an analog spark gap as a medium.

PLASMA TREMOLO/RINGMOD

A very unusual Tremolo circuit that takes full advantage of the PLASMA Tube's sputtery and abrupt bursts.

The Tremolo range goes from slow to full-on screaming Ring mod.

Also, features a Dynamic Tremolo mode (Trigger the Ring mod (or tremolo) effect on transients, or only as the sound starts decaying.

BUILT-IN DISTORTION CHANNEL

PLASMA sound blends very well together with a classic op-amp distortion, therefore the PLASMA RACK gives you access to a built-in distortion circuit to create a huge sound instantly.

The CLEAN GATE button applies the Tube's gating effect to the distorted channel.

3 FX LOOPS WITH SWITCHABLE LEVEL CONTROL

Modify the signal path by inserting external effects or plugins into various parts of the PLASMA Rack's signal chain.

FX LOOP 1 - affects the DRY signal only;
FX LOOP 2 - affects the WET signal only, before it goes into the PLASMA tube;
FX LOOP 3 - affects the WET signal only, after the PLASMA Tube.


CONNECTIVITY

INPUTS: 1 Unbalanced 1/4' TS Jack input (Instrument), 1 Balanced combo XLR/Jack input (with PAD)

OUTPUTS: 1 Balanced XLR & 1 Unbalanced 1/4' TS Jack

MIDI: In, Through, and Out.

FULL MIDI CONTROL + 8 PRESET SLOTS

Control all parameters and values via CC Messages and Program Change Messages.

PLASMA Rack also features 8 Preset slots for saving sounds - incl. button states and knob values.

Also, multiple PLASMA Racks can be synchronised via MIDI CC messages.

ASSIGNABLE EXPRESSION INPUT

Any potentiometer on the PLASMA Rack can be assigned to an Expression pedal.

SAVABLE UTILITY SETTINGS

Make your PLASMA Rack gig-ready by setting up the default boot-up states of all buttons and functions.
Read more
MRP:$1,914.11
coming soon $1,772.33
FORTHCOMING
Tenderfoot Electronics Lattice 12 Step Sequencer Module
Cat: 805814 Rel: 01 Feb 21
 
12-step sequencer module
Notes: Lattice is a 12-step sequencer laid out in 4 rows of 3 steps. These steps can be navigated horizontally, vertically, or sequentially through all 12 steps. Sending different clock inputs from related or unrelated signals can open up a whole world of evolving, polyrhythmic goodness.
Read more
MRP:$299.64 SAVE 24%
coming soon $228.02
FORTHCOMING
Rides In The Storm Modules DPM Dual Passive Multiple Module
Cat: 805806 Rel: 01 Feb 21
 
Dual passive multiple module
Notes: DPM Dual Passive Multiple Module

Three 3.5mm inputs and two 6.3mm outputs or vice versa.

Rackspace: 4HP
Read more
coming soon $47.87
FORTHCOMING
Beats Studio3 Bluetooth Wireless Over-Ear Headphones (Skyline Collection) (midnight black)
Cat: 794266
 
Bluetooth wireless over-ear headphones
Notes: Beats Studio3 Wireless headphones deliver a premium listening experience with Pure Active Noise Cancelling (Pure ANC). Beats' Pure ANC actively blocks external noise and uses real-time audio calibration to preserve clarity, range and emotion. They continuously pinpoint external sounds to block while automatically responding to individual fit in real time, optimising sound output to preserve a premium listening experience the way artists intended.

Incorporating the efficient Apple W1 chip brings seamless setup and switching for your Apple devices, up to 22 hours of battery life for all-day fully-featured playback with Pure ANC on, and Fast Fuel technology for 3 hours of play with a 10-minute charge. Pure ANC-off for low-power mode provides up to 40 hours of battery life.

Make calls, skip songs, control volume and activate Siri using the convenient multi-function on-ear controls. The Apple W1 chip features Class 1 Bluetooth connectivity - the industry-leading classification for range and signal strength. With best-in-class performance, Beats Studio3 Wireless seamlessly syncs to your devices, so you can easily move about, keep the music going and stay productive all day.

The Beats Studio3 Wireless headphone is designed for long-term comfort to match its impressive battery life of up to 22 hours for all-day play. The soft over-ear cushions feature advanced venting and signature ergonomic pivoting for a custom, flexible fit for any head shape. The holistic design is lightweight, durable and comfortable, so you can get lost in your music.

Read more
coming soon $482.28
FORTHCOMING
AniModule Lil' Monster VCO Module
AniModule Lil' Monster VCO Module (oscillator synth module)
Cat: 794393
 
VCO module
Notes: At 8HP and 28mm deep this is A Frightening little Oscillator with Monstrous PWM, Sick, Sick Sync, and Terrifying FM capabilities!!

Great 1V/Oct tracking

Range from below to above the audible

All Waveforms respond to your Sync Input signal

Current Draw: +12V = 21mA, -12V = -21mA 8HP, 29mm Deep
Read more
MRP:$255.85 SAVE 17%
coming soon $213.21
FORTHCOMING
Beats Studio3 Bluetooth Wireless Noise Cancelling Over-Ear Headphones (blue)
Cat: 794254
 
Bluetooth wireless noise-cancelling headphones
Notes: Beats Studio3 Wireless headphones deliver a premium listening experience with Pure Active Noise Cancelling (Pure ANC). Beats' Pure ANC actively blocks external noise and uses real-time audio calibration to preserve clarity, range and emotion. They continuously pinpoint external sounds to block while automatically responding to individual fit in real time, optimising sound output to preserve a premium listening experience the way artists intended.

Incorporating the efficient Apple W1 chip brings seamless setup and switching for your Apple devices, up to 22 hours of battery life for all-day fully-featured playback with Pure ANC on, and Fast Fuel technology for 3 hours of play with a 10-minute charge. Pure ANC-off for low-power mode provides up to 40 hours of battery life.

Take calls, skip songs, control volume and activate Siri using the convenient multi-function on-ear controls. The Apple W1 chip features Class 1 Bluetooth connectivity - the industry-leading classification for range and signal strength. With best-in-class performance, Beats Studio3 Wireless seamlessly syncs to your devices, so you can easily move about, keep the music going and stay productive all day.

The Beats Studio3 Wireless headphone is designed for long-term comfort to match its impressive battery life of up to 22 hours for all-day play. The soft over-ear cushions feature advanced venting and signature ergonomic pivoting for a custom, flexible fit for any head shape. The holistic design is lightweight, durable and comfortable, so you can get lost in your music.

Read more
coming soon $482.28
FORTHCOMING
Transient Modules u2X Dual Buffered Multiple Module
Transient Modules u2X Dual Buffered Multiple Module (dual&stereo/multiple synth module)
Cat: 804252
 
Dual buffered multiple module
Notes: The u2X is a dual buffered multiple with bicolor leds for monitoring signals. Each input is copied into three outputs. As the top section is normalled to the bottom section it's also possible to get 6 copies of the same signal.

Technical specifications:

12HP, Intellijel 1U size.

20 mm depth.

Consumption: 20mA +12V; 20mA -12V
Read more
MRP:$54.73 SAVE 17%
coming soon $45.60
FORTHCOMING
LA67 LR4 Crossover Module
Cat: 806154 Rel: 01 Feb 21
 
Three-way crossover module
Notes: A three-way crossover under voltage control. Two four-pole state variable filters in series allow an input signal to be split into three non-overlapping bands, while the fourth-order Linkwitz-Riley slopes provide ideal band separation. And because both filters are full range, the bandwidths are arbitrary, not range-restricted.

Technical Specifications

6hp
20mm depth
Current draw: 45mA/45mA +12v/-12v

Reverse power polarity protection
Read more
coming soon $212.06
FORTHCOMING
AniModule STD Syncopated Timing Disruptor Module
AniModule STD Syncopated Timing Disruptor Module (clock generator / clock modulator / logic synth module)
Cat: 793790
 
Syncopated timing disruptor module
Notes: The STD, or Syncopated Timing Disrupter is a dual tap tempo clock with CV control for clock division and multiplication. If one wishes to synchronize the STD with other clocked gear, there is also a Gate input. The CV inputs can shift the clock to being upto 8x faster or /8 to be slower. This function is voltage controllable to turn the STD into a nonstop groove machine. Included in this are three logic functions that output gates depending on how the two channels are interacting. There is OR, ADD, and XOR logic functions.

2 Independent Tap Tempo Clock Channels
Prefer to use a Gate? No Prob! Just Patch in to the Gate Input.

Use the Div/Mult/Offset Pot to Multiply or Divide your Clock Time up to *8 - /8

Or patch In to the CV Input to Modulate the Mathematical Madness!
When CV is being input the Div/Mult/Offset Pot behaves as an Offset.

CV Input wants 0V to +5V, but whatever you got, Between the Offset, and the Front Panel CV Attenuators, it's easy to dial in your desired range of "On the Fly" Mathematical Clock Time Modulations.

Want to sync the 2nd channel to the first?
Latch the Ch1 - Ch2 switch and the Output of Channel 1 is normalled to the jack Switch of Channel 2.
You can still control the Multiplications / Divisions of each channel Independently!

If that wasn't enough to get you poppin' penicillin prophylactically there's more!

The bottom row of jacks constantly output OR, AND, and XOR Logic Combinations of the 2 channels combined!

Want to use something funky (like a Sine Wave / Envelope / Random Voltage Generator) to set the rhythm? The Input is a Buffered Comparator set to trigger at any signal above +1.2V

Perfectly happy up in to the Mid- Audio range.

6HP
+44mA
-16mA
Read more
MRP:$225.75 SAVE 17%
coming soon $188.11
FORTHCOMING
Sound Force Samples 6 Channel Drum Module
Cat: 804301
 
6-channel drum module
Notes: The SoundForce Samples is a 4HP 6-channel drum module.

The sounds:
The 6 sounds available on separate channels are the one-shot sounds from the infamous 808 drum machine. It's using a big STM32F405 chip to drive the 6 DACs and store the sounds. The samples are baked-in and can't be changed.

Features:
6 input jacks to trigger the sounds with +5V signals.
6 output jacks for the audio outputs ~10Vpp.

Specifications:
4HP
Depth: 38mm (including power connector)
Power: +12V 85mA, -12V 11mA
Inputs range 0-5V
Output range -5V to 5V
Read more
MRP:$143.66 SAVE 17%
coming soon $119.70
FORTHCOMING
AniModule XXX_OR Module
AniModule XXX_OR Module (clock modulator / CV modulation / logic / ring modulator synth module)
Cat: 794039
 
XOR module with analogue & digital outputs
Notes: A Triple Analog XOR module with an Analog and a Digital (Gate) Output.

You can use the Gate Output for your normal Boolean XOR functions (feel free to input Analog signals.)

But the real magic happens at the Analog Output.

-Take 2 waveforms and feed 1 to A and 1 to B
-When 1 signal is low the other is normal
-When 1 signal is high the other is inverted

It's not just on and off like a digital XOR- you get all the varied nuances of a tri, sine or saw wave that you put in to it.

-The Analog Output of Channel 1 is normalled to Channel 2 A Input via the jack switch
-The Analog Output of Channel 1 is normalled to Channel 3 A Input

This way you can still use your Analog Out from each channel and not worry about patching the next XOR function in the chain together.

Use it for CV!
Use it for Clocking, Tempos and Rhythm manipulation!
Most of all Feed your Audio into it!

Width = 4HP Depth = 29mm

Current draw is:
+12V = +33 mA
-12V = -21 mA
Read more
MRP:$136.82 SAVE 17%
coming soon $114.01
FORTHCOMING
AniModule TrAniModule Module
AniModule TrAniModule Module (distortion / mixer / utility synth module)
Cat: 794385
 
Transistor amplifier module
Notes: Behold the TrAniModule- A 1 Watt, Class A Transistor Amplifier in an 8HP, 29mm deep Package.

With a Line Input to jack your iPod or your Walkman up to synth levels.

You want to process your Line Level signal before you send it roaring out the belly of this little beast?

The Line out is normalled to the Mixer, so just plug in and it'll rip your signal away from the maws of this monster.

If you're looking for high fidelity, you better just slink back in to your studio with your Grandaddy's precious pretty monitors...

If you want portability and a warm sound that will drive when you crank it all the way, without knocking your granny off her chamber pot, We got'em both! AniModule has been working hard to help you achieve your Brown Note!

The Mix out is just a nice clean, buffered mix of your 2 Attenuatable Inputs and the Line Input.

The Speaker Out is normalled to the speaker in case you want to drive a bigger cab, or plug your pretty little headphones in, or capture the tone after the amplifier. If you plug in, the speaker cuts out, but the master will still control the volume- proving to be very handy for live performance.

...and really, if you want a nice clean sound, just dial back the levels a little bit!
Read more
MRP:$180.60 SAVE 17%
coming soon $150.49
FORTHCOMING
Walrus ACS1 Amplifier & Cab Similator MAKO Series Effects Pedal
Cat: 811076 Rel: 30 Apr 21
MRP:$499.39 SAVE 17%
coming soon $416.17
FORTHCOMING
Patching Panda Moon Phase Stereo Multimode Filter Module
Cat: 804366
 
Stereo multimode filter module
Notes: Stereo 12dB/octave state-variable multimode filter with powerful imaging technique to enhance and alter the stereo field.

The resonance sounds beyond any other filter when you play with the stereo imager control.

With 8 different combinations and span to separate both filters, you increase the possibilities to treat your sounds and open them in the stereo field.

Applying audio rate cv to the stereo imager or span control input and sweeping the cutoff control will create a unique character to the filter.

The resonant peaks can be shifted around the stereo field, every cv input can be modulated up to audio rate frequencies creating a wide palette of sonic combinations.

Size: 14HP

Power consumption 82mA@+12V, 63mA@-12V
Read more
MRP:$331.10 SAVE 17%
coming soon $275.91
FORTHCOMING
AniModule V9a Module
AniModule V9a Module (clock generator / sequencer / waveshaper synth module)
Cat: 793809
 
VC sequencer & waveshaper module
Notes: Here's a powerful animal to add to your sequencing arsenal.

Send your CV to the CV In. As the Voltage increases the sequence steps forward. As the voltage decreases the sequence steps back.
Scale and adjust your input voltage to taste with the Onboard Attenuator and Offset.

Control the Output CV with an individual Potentiometer for each step.

When a step changes, a 10MS trigger is sent to it's corresponding switch. If the latching switch is depressed it allows the trigger to pass to the Trigger Out.

There is a switch per step for slew (portamento/slide).
and a Potentiometer to control the Slew Amount.
There is also an input to allow gated control of when the slew turns on and off which will work in conjunction with the switches.

This module is looking for 0V to +5V. The Offset is 0V to +5V.

To allow for chaining of the V9a and rests, 0V will put you under the sequencer range and +5V will put you over the sequencer range.
When the sequence drops below step 1 or over step 9, 0V will be sent to the CV Out and No Trigger will be sent to the Trig Out.
When step 1 or 9 is activated a trigger will be sent to the Trig buss.

Max Current Draw:
+12V = 40mA
-12V = 11mA

Width: 14HP Depth: 39mm
Read more
MRP:$313.32 SAVE 17%
coming soon $261.09
FORTHCOMING
Modulaire Maritime Victor Alpha 4 Channel Stereo Mixer Module
Cat: 803414
 
External/mixer/panning/dual & stereo synth module
Notes: Victor Alpha is a 4 channel Stereo Panning Mixer / Output module with VU Meter

Details & use:

This mixer takes 4 mono signals, transform them to stereo and allows panoramic control over every mix channel as well as their level.
The potentiometers of panning control are with "center detent" which allows you to always know precisely where is the exact center.

The mix signal is scaled thru op-amps buffers to what will correspond to a line level so the mixer is supposed to be placed at the end of the chain to serve as an Output of your modular.
It has separate Left an Right outputs to be used together for stereo output.

The mixer uses high-performance IC borrowed from Hi-Fi world for the output buffer, with high-speed precision audio- to deliver very low noise, clean sound.

The output signal is indicated by the led VU meter which uses two Matsushita ICs calibrated for that purpose.
The leds are selected for lowest power consumption. (The vu meter can be turned off if desired by taking off two jumpers on the back of the module)

This module, along with other Modulaire Maritime modules, is designed to contribute in making the modular synth more autonomous in the sens to alow extended controls "in the rack" and get a rid of the computer, interfaces, etc. Therefore this mixer is suitable also for nomad use as you can stick your speakers, boombox.. directly to your modular setup (without a risk to explode them with a "hot" modular signal :) or to record directly- in stereo with panning control, from your modular.

Made for more fun with a modular!

8hp
25 mm deep
Reverse voltage protected
Read more
MRP:$179.23 SAVE 34%
coming soon $118.57
FORTHCOMING
Transient Modules u3A Three Channel Attenuverter Module
Transient Modules u3A Three Channel Attenuverter Module (attenuator/CV modulation/mixer/polariser/utility synth module)
Cat: 804254
 
3-channel attenuverter module
Notes: The u3A is a three channel attenuverter useful for scale, add offset, invert or sum signals. As each input is normalled to +5V, with nothing plugged into the jacks, each knob controls a voltage range from -5V to +5V. Each output is also summed to the adjacent channel on the right when no cable is connected.

Technical specifications:

18HP, Intellijel 1U size.

30 mm depth.

Consumption: 30mA +12V; 30mA -12V
Read more
MRP:$91.67 SAVE 17%
coming soon $76.39
FORTHCOMING
Tenderfoot Electronics Dupe 3x1 to 3 Buffered Multiple Module
Cat: 805882 Rel: 01 Feb 21
 
Buffered multiple module
Notes: Dupe is a triple 1-to-3 buffered multiple in 4HP.
Read more
MRP:$80.72 SAVE 24%
coming soon $61.56
FORTHCOMING
Rides In The Storm Modules QAM Quad Active Multiple Module
Cat: 805802 Rel: 01 Feb 21
 
Quad active multiple module
Notes: QAM Quad Active Multiple

One input on three outputs.

Usable for audio and CV signals, very distortion- and low noise circuit.

Power consumption: +/- 10mA

Rackspace: 4HP
Read more
coming soon $75.24
Artículos del 101 al 150 de 243 en la página 3 de 5
«  1  2  3  4  5  »

Filter

Coming Soon: Studio Equipment
Close