100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

Inicio  Coming Soon  

Studio Equipment

Options
Artículos del 101 al 150 de 544 en la página 3 de 11
«  1  2  3  4  ...  11  »
FORTHCOMING
EMW Multi Low Frequency Oscillator Noise Module (black faceplate)
Notes: The EMW MULTI LFO-NOISE is another very interesting module: it has a selection of 8 waveforms, including noise, in order to maximize the modulation capabilities of your modular synthesizer setup. When used in conjunction with another LFO (via a DC mixer), the resulting waves can be very varied and random.

Read more
MRP:$90.17 SAVE 19%
coming soon $72.96
FORTHCOMING
Eurorack Hardware Modules E-OR Selectable Gate Mixer Module (black faceplate) (fully assembled)
Notes: The E-OR is a passive 2HP 'selectable gate mixer,' which means that you can choose between two different gate sources, two trigger sources or BOTH using the three way switch per channel. Great for choosing between various rhythms, clocks, gates, etc. Perfect for manual fills and variation in your set! Matte black panel with white ink. The E-OR is diode protected, so combining two trigger or gate sources is what it is meant to do!
Read more
MRP:$44.43 SAVE 17%
coming soon $37.02
FORTHCOMING
ADDAC System ADDAC306 VC Transitions Module (black faceplate)
Cat: 776305
 
VC transitions module
Notes: ADDAC306 is a 5 channel multi-directional CV generator.

You can think of it as a "sweet spot" controller, or a hands-on way of transiting from one state to another.

Each of the five channels has MINIMUM, SPAN and DIRECTION controls, a common CV IN and a common TRANSITION CONTROLLER slider.

MINIMUM sets the minimum channel voltage.

SPAN sets the voltage range of the channel.
It essentially sets the maximum voltage that can be output from the channel, relative to what the current channel MINIMUM is. For a given SPAN value, if the MINIMUM voltage is changed then the maximum voltage output from that channel will also change respectively.

DIRECTION sets whether the voltage transition for each channel goes from MINIMUM to maximum, or maximum to MINIMUM.

The TRANSITION CONTROLLER slider controls the transition from the minimum value (A) to the maximum value (B) or vice versa, according to the settings of each independent channel.
Moving this slider generates 5 different voltages with 5 different ranges and directions. The transition can also be operated from a CV source at the CV IN, in which case the slider position acts as an attenuator for the incoming voltage.

The maximum range of each channel can be set to either 5 or 10 volts, by 5 jumpers in the back of the module. Only positive voltages are generated at the output.

Using the CV IN you can use two ADDAC306 modules to expand your control options to 9 voltage outputs under one common slider control.
Use the VC Transitions to multiply the polyphony of a single CV sequencer by passing its outputs through the ADDAC207.
VC Transition makes for an awesome state transition controller. Plug its outputs to various CV controller parameters of your audio effects modules. Set the slider to position A, and set the minimum values for each channel. Then move the slider to position B and set the SPAN settings for each channel. Use the TRANSITION CONTROLLER slider to morph from state A to state B and backwards. Flip the DIRECTION switches to change the direction of the transition for each channel. Use the CV IN to automate the transition using LFOs, ADSRs or sequencers.
Plug the output of your ADSR envelope to the CV IN and set the channels differently to get 5 different ADSRs from one common source.


This module was developed based on an initial idea by Konstantine Fioretos.
Read more
MRP:$134.60
coming soon $130.67
FORTHCOMING
Schottkey Modular Ratchet Module
Cat: 778087
 
ratchet module
Notes: The RATCHET is a 12-channel, up to 64 steps per channel, drum, event and/or rhythm sequencer that features up to 16 'ratcheted' divisions per step. It's quite powerful with per-step variable gate lengths or ties, swing and random with forward, backward and pong-pong play modes. Save patterns on a provided Micro SD card.

Other features include: Per Drum pattern lengths, Per Drum Random Amounts, Drum muting, Random Muting, copy/paste, and so much more!

Ships with Micro SD Card.

20HP wide - 25mm deep
Read more
MRP:$376.36 SAVE 19%
coming soon $304.92
FORTHCOMING
ADDAC System ADDAC802R VCA Quintet Reversed Panel Module (red faceplate)
Notes: Our Reversed panel version of the ADDAC802 VCA Quintet.

Each of the 5 channels has:
. VCA with initial Knob
. Monitor LED
. Independent output
. Linear or logarithmic control
. Solo/Off/Mix switch that routes their audio to the Solo Channel or the Mix channel. In Off position the VCA does not go to the outputs.

All 5 VCA's can be used separately for different sources (audio or cv) or mix in 2 different chains.

Outputs:
. 1 Pre Master VCA output
. 1 Post Master VCA output
. 1 Solo output

The Solo line is also intended for Pre Listening purposes, using this output to connect your headphones through some headphone amplifier module.

Mechanical:
. Format: Eurorack
. Width: 12 HP
. Depth: 5 cm

Control Voltage I/O:
. CV inputs: i 10v

Electrical:
. Compatible with +-12v and +-15v power supplies?
. Max current: +190mA/-150mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$393.35
coming soon $381.14
FORTHCOMING
ADDAC System ADDAC805.VS2 VC Signal Router Module (black faceplate)
Notes: Inspired by our ADDAC701 VCO waveform mixing section, our new VC Signal Router also updates our legacy X-Fade/Panner to a stereo configuration that also allows 4 quadrant mixing.

Featuring two dedicated X-faders and a stereo VCA that can also be used as a third X-Fader. All controls have their own CV inputs and dedicated Attenuverters for precision control.

4 quadrant mixing is achieved by using the stereo Master as a X-fader between left and right channels, this way you can plug 4 audio sources and sweep/crossfade between each and any of them using the 3 x-faders. Plug any 4 sources (4 waveforms of a VCO, 4 LFOs, 4 envelopes...) and sweep through morph through or have them all mixed together.

For other configuration types Left and Right X-fader channels can be routed through the Master stereo VCA or sent directly to the outputs. A stereo Direct input can also be routed through the Master VCA or sent straight to the outputs.

The Mono Sum output always mix Left and Right outputs together allowing the possibility to use the module as a peculiar 6 channel mono mixer.

It can be used for both Audio or CV Signals.

Tech Specs:
8HP
4.5 cm deep
40mA +12V
40mA -12V
Read more
MRP:$180.34
coming soon $174.24
FORTHCOMING
ADDAC System ADDAC701.REV2 VCO Module (black faceplate)
Notes: This is our new VCO, we discontinued our ADDAC701 VCO a few years back and since we've been wanting to release a more stable version with better pitch tracking increasing pitch reliability further minimizing the detuning issues of analog VCO's.

For this new revision we chose to use the modern version of the CEM3340 ic from CoolAudio and add the triagle to sine circuitry of our previous VCO. This new version is extremelly stable over 7 octaves.

We also added a new Mix section which allows mixing of all waveforms controlled by 3 knobs SIN/TRI, MIX and SAW/RECT.

Tech Specs:
8HP
3.5 cm deep
60mA +12V
60mA -12V
Read more
MRP:$180.34
coming soon $174.24
FORTHCOMING
Sensel Buchla Thunder Overlay For Morph MIDI Controller
Cat: 785456 Rel: 22 Oct 20
 
Overlay
Notes: The legendary expressive controller, the Buchla Thunder, now comes to the Sensel Morph in an exclusive new partnership with Buchla U.S.A.

The Buchla Thunder Overlay exclusively features a new preset system to the Morph. By holding the preset button and tapping on one of the nine numerical keys, you can easily and instantly switch between nine mappings without needing to open the SenselApp. Need to go from an instrument controller to a virtual mixer? Want to swap between scales? Presets add a seamless extension of expressive control possibility to the Buchla Thunder Overlay.

The Buchla Thunder is uniquely well-suited to a variety of instruments - from synthesizers with rich and evolving timbres, to acoustic samples that benefit from a more human touch, to hardware synthesizers like the legendary Buchla Easel. You can witness the richness of expression in the videos above.

The MIDI protocol is USB Class-compliant and supports MIDI Polyphonic Expression (MPE) and Bluetooth MIDI.

Read more
MRP:$83.64 SAVE 24%
coming soon $63.16
FORTHCOMING
Sensel Morph USB & Bluetooth MIDI Controller (standalone)
Cat: 785452 Rel: 22 Oct 20
 
USB & Bluetooth MIDI controller
Notes: Swap overlays to change from music, writing, gaming, and more. USB or Bluetooth means the Morph works anywhere. Experience a new level of expression with 20,000 pressure sensors at your fingertips. Whatever your passion, you can make it with Morph.

Comes with:
Sensel Morph
One overlay of your choice: Piano, Music Production, Drum Pad, Buchla Thunder (+$20=$269), Innovator's, Video Editing, Keyboard, Gaming
License to Arturia's Analog Lab Lite synthesizer software
License to Bitwig's Studio 8-Track music-creation software (when purchased with a MIDI overlay*)
USB Cable

The Sensel Morph uses Sensel's patented PressureGrid technology: a high-resolution, multi-touch, pressure sensing touch technology with a sensitivity range of 5g to 5kg and a tracking accuracy of ~0.1mm.

Compatibility: Windows, OS X, iOS, Android, Linux, Arduino (see final product image for more details on compatibility)
Dimensions: 240 mm x 169.5 mm
Active Area: 230 mm x 130 mm
Thickness: 6.75 mm
Weight: 0.4 kg
Latency: 2 ms - 8 ms (mode dependent)
Resolution: 6,502 DPI
Connectivity: USB, Bluetooth LE, and Serial
Power: USB, Rechargeable Battery
MIDI: USB Class-compliant, MIDI Polyphonic Expression (MPE), Bluetooth MIDI
Read more
MRP:$351.53 SAVE 33%
coming soon $234.13
FORTHCOMING
Behringer B906 Dynamic Microphone
Behringer B906 Dynamic Microphone (instrument microphone)
Cat: 772981
 
dynamic microphone
Notes: A super cardioid dynamic mic that's custom designed for great instrument reproduction! The B 906 instrument microphone is especially tailored for guitar amps, and is also excellent for percussion, horns and vocals.

The B 906 features a switchable presence filter which allows you to tailor the sound characteristics to different sound requirements and styles. The filter is adjusted via a slide switch on the microphone with different positions to boosts the presence for aggressive metal rhythm guitars or for classic rock and smooth jazz and blues sounds.

You can hang the B 906 on a guitar amp for stand-free performance. Its laterally mounted capsule has been specially developed for miking guitar amps face on and extremely close to the signal source. Due to its flat design, the B 906 is also very suitable for use with drums, since it can easily be positioned in cramped space conditions. The super cardioid pattern is great for reducing bleed in tight situations onstage, and the B 906's hum compensating coil rejects interference.
Read more
coming soon $41.37
FORTHCOMING
Magma CTRL Case MPC One For Akai MPC One Sampler & Sequencer
Cat: 779623
 
Custome case for Akai MPC One Sampler & Sequencer
Notes: The CTRL Case MPC ONE is custom designed to a hold the new AKAI MPC ONE and is a very lightweight and convenient solution to carry your sampling workstation well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize audio cables and accessories.

FITS:
Akai MPC One

SPECS
Outer measures: 32 x 32 x 13,5 cm
Inner measures: 28 x 28 x 10 cm
Weight: 0,8 kg
Read more
MRP:$65.34 SAVE 17%
coming soon $54.44
FORTHCOMING
Teenage Engineering Limited Edition PO Ultimate Punch Pocket Operator Bundle
Cat: 784909 Rel: 16 Oct 20
 
Pocket operator bundle
Notes: Beats from the famous PO-12 rhythm, melodic 8-bit computer-gamey chiptune sounds from PO-20 arcade, plus the PO-33 K.O! with its ability to sample the whole world around you.

Read more
MRP:$299.26 SAVE 20%
coming soon $239.58
FORTHCOMING
Erica Synths Sequential Switch V1 Module
Cat: 780453
 
Switch module
Notes: Erica Synths 8 channel Sequential Switch is the first assembled module for Erica synths, and it allows you to sequence up to eight sound sources in advanced ways or route one sound source sequentially to eight different sound modifiers- VCFs, waweshapers, VCAs, etc.

It has unique control interface that allows you to pause, skip and merge steps, set sequence length, but what really sets it apart from other sequential switches is Gate output- when used with ADSR and VCA, you get really powerful sequencer with real time control over each sound source in the sequence. Use sequential Switch with random clock source and you get a heart of insane random, self-generating patches!

Technical characteristics:

Panel width: 14HP
Module depth: 20mm
Max power consumption (all LEDs on): 52mA@+12V, 13mA@-12V
Read more
MRP:$146.36 SAVE 54%
coming soon $67.51
FORTHCOMING
Erica Synths Pico System II Modular Synthesiser
Cat: 778768 Rel: 31 Aug 20
 
modular synthesiser
Notes: Erica Synths Pico System II is the world's smallest modular synthesizer.

In its functionality this system is as good as the Pico System I, however, as there have been several additions to the Pico Series, for example, the significant Pico Voice, we decided to upgrade the Pico System to make it even more multifarious. There are two new modules in the system: the Pico Voice - a sound source, which gives quite a big timbral diversity, and the Pico Modulator, which replaces the Pico EG and the Pico VCA. That gives us a 3HP free space which we have filled with one more Pico A MIX for more handy control of the sound sources in live performances. Pico System II comes with external PSU, Pico Drum Programmer, wrench key and 20 patch cables.

Pico modules included in the system are:

SEQ - powerful 16 step sequencer with 16 pattern memory

VCO - 32 custom waves in 2 banks, great 1V/oct tracking and LFO mode

VOICE - sound source with 8 sound generation algorithms

VCF1 - Polivoks-inspired LP/BP VCF, ideal for acid-like basslines

TRIGG - 4 trigger pattern generator that also serves as a master clock for the system. Web-based pattern designer app allows user to upload own patterns

2xDRUMS - 64 sample player with 3 adjustable parameters and CV control over them. Web-based app and Pico Programmer (included) allows the user to upload their own sound samples

MULTI - buffered audio/CV/clock signal splitter

RND - sine/pulse LFO and random events (random trigger, S&H and noise) generator

MOD - lin/log ASR envelope generator and linear VCA

2xA MIX - 3 input audio mixer

DSP - stereo effects processor with 8 great sounding custom effects

OUTPUT - stereo output module with headphone amplifier


Technical specifications:
Dimensions (WxDxH): 240mmx140mmx80mm
Power supply: universal 110-240VAC - 12VDC adapter
Power consumption 500mA
Mass : 1,35 kg excluding PSU,
1,85 kg with PSU and patch cables
Read more
MRP:$1,568.16 SAVE 17%
coming soon $1,306.79
FORTHCOMING
Tangible Waves AE Modular SEQ8 Analogue 8-Step CV Sequencer Module
Cat: 786498 Rel: 31 Oct 20
 
8-step CV sequencer module
Notes: An analog 8-step CV sequencer.

The SEQ8 is an 8-step sequencer for controlling oscillator pitch and triggering envelopes.

Compared to "classic" analog sequencers it works a bit different: Instead of setting the CV for each step independently (which means in fact "tuning" each step which can be a bit tedious), the SEQ8 has 4 knobs for presetting different CV's (= notes); each of the 8 step knobs selects one of these CVs, plus 0V (=base note) plus Pause (no trigger output). So some CVs have to be fine-tuned once; with the step knobs you can focus entirely on the sequence itself and you can even modify it on the fly, still remaining in tune.

Additionally to the selected CV presets, the "raw" value of the step knobs is also accessible at an extra output.

Module power consumption: 7 mA
Read more
MRP:$62.73 SAVE 17%
coming soon $52.26
FORTHCOMING
Tangible Waves AE Modular Case Hinge Kit Type 1
Cat: 786535 Rel: 31 Oct 20
 
Case hinge kit
Notes: The case hinge kit allows it to join two cases at a free angle. It contains:

two joint elements
four screws
a connection cable between the cases.

This type is designed for an application where one case is flat on the surface and the other one mounted at a certain angle. The triangle shape has the advantage that the contact to the surface is exteded to the rear side so the complete unit has a stable stand.

Via the connection cable the bus and power supply is shared between both cases, so no extra power supply / second MASTER module is needed for the additional case.
Read more
MRP:$18.30 SAVE 17%
coming soon $15.24
FORTHCOMING
Nektar Impact GXP61 USB MIDI Controller Keyboard
Nektar Impact GXP61 USB MIDI Controller Keyboard (USB MIDI controller keyboard)
Cat: 784008 Rel: 30 Sep 20
 
MIDI controller keyboard
Notes: Nektar products are synonymous with DAW integration on Mac and Windows and the Impact GX61 is no exception. The compact design is comfortable in front of a computer and delivers powerful functionality not even found on more comprehensive controllers. When inspiration strikes, the Impact GX61 delivers the control needed to capture ideas while they are fresh. Compact. Powerful. Control.

The Impact GX61 is a dynamic and expressive instrument, tailored to composition & performance with your computer music system. The no-fuss interface is a great entry into the world of Nektar controllers.

Featuring a 61-note (5 octave) keyboard, pitch-bend wheel, modulation wheel and foot switch socket. Two multi-colored octave buttons enable shifting the keyboard range up or down -3/+4 octaves with the LED colors changing to show the exact status, Impact GX are well equipped to deliver a great workflow.

Dedicated transpose buttons allow you to shift the keyboard range up to +/- 12 semi tones. The buttons can quickly be re-purposed to change the Global MIDI Channel or send Program messages. Additionally an assignable potentiometer provides control over any MIDI parameter, by default controls mixer volume.

Nektar DAW Integration for many of the most commonly used DAWs makes it easy to get going, and a pleasure to use. With Impact GX49 your controller keyboard is part of your system, giving you the creative freedom to compose, perform and play, without having to reach for your mouse constantly.

Eight buttons intended for DAW control, are at the center of the Impact GX. Essential tasks like transport activation or navigating tracks are highly repetitive and reaching for the mouse every time, can kill any seed of inspiration. Used with Nektar DAW integration, the 8 buttons extend functionality to include control over transport and a host of other important DAW functions, right from Impact GX.

The buttons can also be assigned to MIDI messages for use with any MIDI software that's not supported by Nektar DAW Integration. A primary and a secondary message can be programmed for each of 7 buttons, delivering 14 programmable options total.

Nektar DAW integration is carefully crafted to give the best experience with your Nektar hardware. It delivers the freedom to create, instead of having to reach for the mouse constantly when you are in the middle of capturing an idea.

Transport control with ability to goto and set locators, track navigation, volume control, launching windows and patch navigation is all available right from Impact GX. Check out the function overview chart below and see how the Impact GX ticks all the right boxes.

Impact GX is a MIDI controller as well as a DAW controller. If you use MIDI software that's not supported by Nektar DAW Integration, a host of options are available for you to set up MIDI control yourself.

Each of the 14 assignable MIDI buttons, the modulation wheel, foot switch and of course the big control knob, can be assigned to send out MIDI cc messages. The assignable buttons (14) can in addition be configured to send out Program message or MMC transport control. MMC (MIDI Machine Control) is often supported by DAWs that don't allow for advanced integration, so with this option Impact GX covers all the bases.

The Setup menu also enables Program messages, Bank LSB/MSB to be sent out on the fly as well as settings for selecting one of the 4 velocity curves, setting the Global MIDI Channel and assigning the transpose buttons.

As a low powered USB device, Impact GX works with all USB devices that feature a Class compliant MIDI driver. That includes all version of Windows from XP and higher, Apple OS X 10.5 and higher plus Linux (as long as a USB MIDI driver package is installed).

And if you are often on the move you can easily hook your Impact GX keyboard to an Apple iPad using the iPad's optional USB camera connection kit (optional). Of course the Impact GX is powered by the iPad so you can work away for as long as your iPad remains charged.

Bitwig 8-Track is included with every Impact LX+ so you can start producing, performing, and designing sounds like a pro from day one. Bitwig 8-Track gives you access to over 50 software instruments and effects for use on up to 8 audio or MIDI project tracks, and you can use any 3rd party VST plug-ins you might own, too. The 'Bitwig Essentials Package', a highly versatile handpicked selection of loops, clips and samples, is also included to help you get started. So put all that together and you have a powerful sketchpad for your musical ideas featuring the acclaimed workflow of Bitwig Studio.
Read more
MRP:$261.36 SAVE 17%
coming soon $217.79
FORTHCOMING
Flame uMLFO MIDI Clock To Analog LFO Module
Cat: 781484 Rel: 22 Sep 20
 
MIDI clock to LFO analog LFO module
Notes: The Flame uMLFO consists of 14 MIDI LFOs which are synchronized to the clock. The module also works with analog clock.

Additional analog clock and reset inputs allow to create pingable LFOs.

It is possible to adjust the frequency, waveform and phase of each LFO. 12 presets are selectable via MIDI keyboard. Thanks to Sysex it is possible to program new setups.
Read more
MRP:$222.16 SAVE 17%
coming soon $185.12
FORTHCOMING
TC Electronic TC8210-DT Reverb Plug-in with Dedicated Hardware Controller
Cat: 781357
 
Reverb plug-in
Notes: Classic Mixing Reverb Plug-in with Dedicated Hardware Controller

Sound:
Sample rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz

Software Support:
Operating systems: Mac OS X 10.13 Sierra or above, Windows 7 or above
Drivers: No additional drivers required, uses standard USB HID drivers
Plugin formats: AAX-native, Audio Units, VST2.4, VST3. 64 bit

USB Connection (DT version)
Type: USB 2.0, type micro-B

Power (DT version)
Power supply: USB bus powered
Power consumption: Max. 2.5 W

Physical (DT version)
Dimensions (HxWxD): 42 x 54 x 135 mm (1.7 x 2.1 x 5.3")
Weight: 0.22 kg (0.48 lbs)
Read more
coming soon $100.18
FORTHCOMING
Eurorack Hardware Modules AMIX Active Audio & CV Mixer Module (black faceplate) (fully assembled)
Notes: The AMIX module from Eurorack Hardware has three channel (active) powered mixer in 2HP for Eurorack. Great for both Audio and CV sources. Matte black panel with white graphics. Max gain of 1.
Current Draw: +12=15mA, -12=10mA, +5=0
Read more
MRP:$87.56 SAVE 19%
coming soon $70.78
FORTHCOMING
EMW Voltage Controlled Filter MG24 Module (black faceplate)
Cat: 774633
 
voltage controlled filter module
Notes: The EMW VCF MG24 is a Moog style 24db/oct low-pass resonant filter. Its sound and response were designed to be as close to the Minimoog filter as possible. This module has a 2-CH input audio mixer with individual input level control and two modulation inputs with individual input level control. Self-oscillation is very linear and ranges from 10Hz to beyond 20KHz.
Read more
MRP:$211.70 SAVE 19%
coming soon $170.97
FORTHCOMING
EMW 200 Filter Module (black faceplate)
Cat: 774648
 
filter module
Notes: The EMW-200 Filter module is the same found on the EMW-200 synthesizer and its circuit is very similar to the one used on the old EML-200.These filters have a 6 db/oct attenuation curve and they sound amazing. No other filter can create a 'dark' sound atmosphere like these ones. It is a great addition to any modular synthesizer setup, specially for those designed to work with sound design and electronic music.

Read more
MRP:$95.40 SAVE 19%
coming soon $77.32
FORTHCOMING
EMW Arcade Noise Generator Module (black faceplate)
Cat: 774771
 
noise generator module
Notes: The EMW ARCADE Noise is a very unique digital noise generator that can create a wide range of sounds, which covers old video game consoles and arcade machines, dense digital and dark noisy sound atmospheres. It has several CV inputs for controlling the generator algorithm, frequency, reset point and operation mode. The module can also be connected to a standard VCO to create noises that can be played together with that VCO, a very powerful feature.

Eurorack (3U) form factor - 8 HP width
Power consumption +12V [37mA] / -12V [0mA]
Connectors: 3.5mm
Weight 113g
Depth: 50mm
Read more
MRP:$163.35 SAVE 21%
coming soon $129.60
FORTHCOMING
EMW Boozy Voltage Controlled Filter Module (black faceplate)
Cat: 774642
 
voltage controlled filter module
Notes: The EMW Boozy VCF is a specially designed 6dB/oct voltage controlled filter with an unique and interesting sound. It was not designed to replace any standard VCF module but it's ideal to create more sound variations in a modular system. When the cut off frequency is adjusted to it's minimum the sound is not completely muted. This feature summed to its special resonance actuation curve adds one more option to your timbres.
Read more
MRP:$117.61 SAVE 19%
coming soon $94.74
FORTHCOMING
Empress Effects Reverb Pedal
Cat: 783099 Rel: 30 Sep 20
 
Reverb pedal
Notes: Realistic simulations of spaces, as well as never-before-heard surreal ambiances are represented with stunning sound quality. Sporting stereo ins and outs, a small footprint and all the controls at your finger-tips, it strikes the perfect balance of control and ease of use, avoiding laborious menus. Presets, the versatile control port, and MIDI open up a world of possibilities for live performances. Whether you're looking for a classic spring, realistic room or new sonic flavors to expand your creativity, this pedal delivers. And....it's got a beer mode!

The pedal has 12 algorithm types, some include multiple variations. For example, vintage and studio plate, dark and bright springs. Also, as more algorithms get added you can update your pedal via the SD Card. It's the pedal that keeps on giving.

Pristine sounding classic hall, plate, spring and room sounds that rival or surpass studio units costing many times more.

A complete palette of tweak-able ambient sounds that offer the creative player so much territory to explore and make their own.

All the algorithm controls are sitting on a knob in front of you, no fiddling through laborious menus.

Many algorithms have infinite hold settings or the ability to tap in delay time.

Features a signal to noise ratio of >104dB and maintains an analog dry path.

Settings can be saved to 35 presets. With three stomp switches, accessing the presets is easy.

Bank style or scrolling style preset modes.

It can be configured to run with true bypass or buffered bypass if you want to hear trails.

3 variations to choose from, perfect for recording, practicing or for gigs without an amp.

Get hum-free operation when operating in stereo with two amps. Output 2 is isolated with a transformer to eliminate nasty ground loops.

48kHz sampling, with 24 bit conversion and 32 bit internal processing.

Dry signal is left untouched, and blended with the wet signal using VCA. (no zipper noise, hooray!)

The Universal Control Port allows you to connect an expression pedal, external tap switch, control voltage, external audio input and MIDI - all using a standard 1/4" jack!

The Advanced configuration menu lets you configure how your reverb works. Select from true or buffered bypass, 0-35 presets, MIDI configuration, Control port control(expression pedal, external tap, control voltage and MIDI) as well as which style of preset system to use, input signal pad, output transformer enable and more!

The enclosure measures approximately 5.7" by 3.75" by 1.75", which is delightfully small when considering all the features packed into this unit.
Read more
MRP:$601.13 SAVE 17%
coming soon $500.94
FORTHCOMING
SynthRotek MIX Mixer Module (black faceplate) (fully assembled)
Notes: This simple passive mixer is suitable for mixing both audio and control voltage sources. Three channel inputs mix down to one output.

It is not suitable for additive voltage applications. All the jacks are switched to ground to minimize external interference when not patched. This can lead to unwanted attenuation of the output signal unless you plug a dummy cable into the unused channel(s) or, even easier, you can turn the channel's pot completely CCW.

Specifications:
Width: 2HP
Power consumption: none
Module screws included
Read more
MRP:$31.36 SAVE 14%
coming soon $26.96
FORTHCOMING
ADDAC System ADDAC105 4 Voice Cluster Module (black faceplate)
Cat: 776118
 
4-voice cluster module
Notes: Following the ADDAC103 T-Networks, this new module is inspired by it's simplicity. This is a 4 voice Square Oscillator with VCA, FM switch and a slew decay for the incoming Trigger IN. All voices are then sent through a Multimode Filter.

Each voice has it's own VCA input where any input is accepted (Trigger, Gate, CV) The [DECAY] controls the slew decay applied to the incoming signal, if [DECAY] is fully anti-clockwise then it works as a Mute. The [FM ON] switches activate/deactivate the FM input coming from the previous voice: Voice 1 FM comes from voice 4, voice 2 FM comes from voice 1, and so on, so you can FM all of them in a FM loop.

All 4 voices are summed and sent through a filter with controls over [CUTOFF] with an Attenuverter for the CV input and [RESO- NANCE]. Three filter outputs are provided [LOWPASS], [BANDPASS] and [HIGHPASS]

The [EXTERNAL IN] input can be routed through a jumper on the back of the module allowing the incoming signal to go to:
the filter input for processing an external audio source.
all of the 4 voices Frequency control allowing for some experi- mental CV control over pitch of all 4 voices at the same time (due to the specificities of the circuit and to keep the module at a low price these inputs are not callibrated to 1v/octave).

Read more
MRP:$112.38
coming soon $107.80
FORTHCOMING
Eurorack Hardware Modules ATT 2HP Triple Attenuator Eurorack Module (black faceplate) (fully assembled)
Notes: Get the most signal attenuation in the smallest 3U package possible! The ATT module features three independent IN - Attenuate - OUT circuits in one 2HP module. Works great for attenuating both audio and CV signals. Completely passive, so no current draw on your power supply.
Read more
MRP:$44.43 SAVE 17%
coming soon $37.02
FORTHCOMING
ADDAC System ADDAC703 Discrete Mixer Module (black faceplate)
Notes: Here's the second module of ADDAC System's 700's Heritage Series.

Inspired by Moog CP3 mixer, this is a totally discrete analog mixer and it's not, by any means, your standard breakfast mixer, although it can behave like one.

This is a wolf in sheep's clothing. Despite its harmless looks there's a dark snarly soul behind that panel that wants to take your sounds into a realm of gritty gnarly growls.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 3 cm

Electrical:
. Max current: 60mA.
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.

Included:
.black screws
.black fibre washers
Read more
MRP:$202.55
coming soon $196.01
FORTHCOMING
EMW Echo Effects Module (black faceplate)
Notes: This is a digital Echo module designed to have a very vintage and analog style sound. It adds a very dist inct ive and interest ing sound characteristic to any setup.
Read more
MRP:$116.31 SAVE 22%
coming soon $90.39
FORTHCOMING
EMW Chorus Module (black faceplate)
Cat: 775233
 
chorus module
Notes: Stereo chorus module
Read more
MRP:$155.51 SAVE 20%
coming soon $124.15
FORTHCOMING
EMW Phase 45 Analogue Phaser Module (black faceplate)
Notes: The EMW Phase 45 is a simple yet powerful analog 1-stage (45 ) phaser module. It features manual controls for Feedback and Phase as well as a CV input for Phase modulation (Mod In).

Eurorack (3U) form factor - 8 HP width
Power consumption: +12V [10mA] / -12V [10mA]
Weight: 86g
Depth: 50mm
Read more
MRP:$103.24 SAVE 21%
coming soon $81.68
FORTHCOMING
EMW Phaser 4 Four Stage Analogue Phaser Shifter Module (black faceplate)
Notes: The EMW analog 4-stage Phaser produces one of the deepest and most powerful effects used in electronic music. The analog phase-shifter effect differs a lot from the one created by digital processors mainly because it features a warm and penetrating sound characteristic that is very hard to emulate, This is a must have module for any modular synthesizer setup.
Read more
MRP:$189.49 SAVE 22%
coming soon $148.10
FORTHCOMING
EMW Analog Drum Synth Module (black faceplate)
Cat: 775428
 
analog drum module
Notes: The ANALOG DRUM SYNTH module from EMW is a complete percussion synthesizer that can be used to easily create deep analog sounds like bass drum, snare drum, modulated sweeps, effects, etc. Its architecture is based on the famous Korg ER-1 drum synthesizer but it was created using all analog technology for high impact and deep sounds.

Eurorack (3U) form factor - 22 HP width
Power consumption: +12V [57mA] / -12V [37mA]
Weight: 260g
Depth: 50mm
Read more
MRP:$333.23 SAVE 19%
coming soon $268.98
FORTHCOMING
EMW Logic 101 Logic Functions Module (black faceplate)
Notes: The EMW Logic 101 module has 4 different logic functions that are useful when you need to control pulses in order to create alternative activation logic. The «&" or "AND" function output only goes high when both A and B inputs are on a high level. The "OR" function output goes high when either A or B inputs are on high level. The verters,as expected, inverts the signal in its outputs, going high when the input is low and vice-versa.

Eurorack (3U) form factor - 6 HP width
4 logic functions In only 6HP rack space
2 x AND function, 1 x OR and 2 x Inverter
External pulse input: 2.5 to 15 Volts.
Power consumption. +12V [34mA] / -12V [0mA]
Connectors: 3.5mm
Weight: 72g
Depth: 50m
Read more
MRP:$121.53 SAVE 20%
coming soon $96.93
FORTHCOMING
EMW Dual Glide Processor Module (black faceplate)
Cat: 775740
 
glide processor module
Notes: The EMW Dual Glide Processor module can create glide or portamento effects on control voltages. It's great for creating portamento effects on CV sequences or changing the decay characteristic of a control voltage or another low frequency waveform.
Read more
MRP:$77.10 SAVE 21%
coming soon $60.99
FORTHCOMING
EMW 8-Step Trigger Sequencer Module (black faceplate)
Notes: The EMW 8-Step Trigger Sequencer combines many different features into a wellsized 8hp module. This module let’s you program 8 different sequences that can be used to trigger drum modules, envelopes or function generators. The module includes clock, reset, and hold CV inputs as well as a "Beat-1" trigger output that sends out a trigger whenever the sequencer goes through Step #1.

Eurorack (3U) form factor - 8 HP width
Power consumption: +12V [38mA] / -12V [0mA]
Weight: 119g
Depth: 50mm
Read more
MRP:$124.15 SAVE 22%
coming soon $96.93
FORTHCOMING
SynthRotek Verb Reverb Module (black faceplate) (fully assembled)
Notes: The Synthrotek Verb is a reverb module like no other. This PT2399 unit offers a warm tape-saturated spring reverb sound, but the added flair of subtle modulation truly makes it shine. The input gain knob drops the input amount back to give cathedral-like sounds when the mix is high. Turn the modulation knob manually for pitch bends; patch in a slow LFO or envelope CV to emulate pitch bends reminiscent of a tape echo with a broken capstan. The mix knob is a very fast-responding cross fader circuit which allows audio rate inputs for further FM-like modulation. Add a subtle amount of reverb or crank the mix past 3 o'clock to knock the reverb signal into the rails.

Current Draw:
18mA @ -12V
87mA @ +12V
0mA @ +5V
Width: 4hp
Depth: 54mm ( 2.13in )
Read more
MRP:$188.18 SAVE 19%
coming soon $152.45
FORTHCOMING
Eurorack Hardware Modules OR Dual Eurorack Combiner Module (black faceplate) (fully assembled)
Notes: The OR is a passive dual OR Combiner module in 2HP for Eurorack. Two channels of three inputs to one output. Matte black panel with white graphics. Perfect for adding gates or trigger signals together as each input is diode protected. Passive, no current draw.
Read more
MRP:$37.90 SAVE 17%
coming soon $31.57
FORTHCOMING
EMW MIDI Mixer Module (black faceplate)
Notes: The EMW MIDI Thru-4 was designed to help users with multiple MIDI modules. It let’s you take 4 copies of a MIDI signal that can be used with any of our EMW MIDI-enabled oscillators.

Eurorack (3U) form factor - 8 HP width
Power consumption: +12V [34mA] / -12V [15mA]
Weight: 73g
Depth: 50mm
Read more
MRP:$108.46 SAVE 19%
coming soon $88.21
FORTHCOMING
ADDAC System ADDAC301B Dual Expression Pedal Attenuator Module (red faceplate)
Cat: 776289
 
dual epression pedal attentuator
Notes: Passive dual expression pedal attenuator.

Plug any CV or audio source through it and control its amplitude through any standard expression pedal.

Invert switch for inverting the expression pedal action.

Specs:
. Passive Module
. Width: 4 HP
. Depth: 3 cm
Read more
MRP:$73.18
coming soon $70.78
FORTHCOMING
ADDAC System ADDAC807A&B VC Stereo Summing Mixer Module (sold as pair) (black faceplate)
Notes: All you could ever dream of from an Eurorack console, and then some.

The ADDAC807A VC Stereo Summing Mixer offers you the power, the flexibility and the gorgeous layout of a high-end audio console, in the popular Eurorack format. Starting off at 5 stereo channels, with the option to add 4 additional stereo channels via the ADDAC807C Expansion Console, its send/return options and clever matrix will ensure you have that perfect mix down in seconds. Customary to ADDAC System designs, there is enough CV control and hands-on switch options to make the ADDAC807A into an instrument in and of itself.

The ADDAC807A is accompanied by its sibling, the ADDAC807B Inputs Console. We decided to allow the user to freely define the placement of the jacks by separating the area where all your cables are located. Less clutter means more hands-on control and higher playability. The ADDAC807B Inputs Console holds all the jack inputs for the ADDAC807A Main Console, along with CV inputs and additional channel settings cause you can never have enough switches.

MECHANICAL:
Format: Eurorack
ADDAC807A Width: 56 HP
ADDAC807B Width: 24 HP
Depth: 4.5 cm
Weight: 1.5 kg (3.3 lb)

CONTROL VOLTAGE I/O:
CV inputs: i 5v

ELECTRICAL:
Max current: 650mA on each rail
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
coming soon $1,778.03
FORTHCOMING
SynthRotek Arcadian Rhythms Module (black faceplate, blue buttons) (fully assembled)
Notes: Arcadian Rhythms is an arcade button module that can be used to trigger drums, envelopes and other events in a Eurorack system. When the buttons are pressed, they light up and send a gate. As long as a button is held down, the gate remains high.

Mix and match your LED buttons! The brightness between colors will vary slightly, but the trimmers on the back of the module will adjust the LED brightness so the three buttons match. Reducing the brightness will also reduce the current draw (each button draws 41mA at full brightness).

Choose red, blue, green, yellow or white buttons.

Specifications:
Module width: 35mm
Module depth: 6HP
Current draw: +12V: 123mA max (41mA per button)
Read more
MRP:$69.26 SAVE 18%
coming soon $56.62
FORTHCOMING
ADDAC System ADDAC214 VC Rotator Module (red faceplate)
Cat: 776199
 
VC rotator module
Notes: This is the VC Rotator, a stepped routing module for any type of signal (audio, cv, gate, trigger...)

Similar to a VC switcher but in this case there's the same number of inputs than outputs so, instead of 4 to 1 or 1 to 4, this module is always 4 to 4 but it can be patched for 2 to 2 and 3 to 3 step actions.

All four inputs get routed to the four outputs depending on the CV and Clock controls and are divided into 4 routing steps:
1. routes all inputs to the same number output: 1:1, 2:2, 3:3, 4:4
2. routes all inputs to an offset of 1: 2:1, 3:2, 4:3, 1:4
3. routes all inputs to an offset of 2: 3:1, 4:2, 1:3, 2:4
4. routes all inputs to an offset of 3: 4:1, 1:2, 2:3, 3:4

Direction determines if the clock input goes forward or backwards.
Going forward it can be set to 2-3 or 4 steps using the Rotate knob offset, going backwards always sync to 4 steps even if offseted by the Rotate knob.
For 2 & 3 step action input 1 is normalled to input 3 and input 2 is normalled to input 4.

Reset resets the internal clock to the first step.

Pendulum, external sequencing or any complex CV actions can be achieved using the CV input and dedicated attenuverter.

4 leds monitor which input is routed to output 1.
Read more
MRP:$180.34
coming soon $173.14
FORTHCOMING
ADDAC System ADDAC705 Stinggy Filter Module (black faceplate)
Notes: The new ADDAC System filter, inspired by the original WASP Filter.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 3 cm

Electrical:
. Max current: +12V 60mA, -12V 30mA.
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.

Included:
.black screws
.black fibre washers

Read more
MRP:$246.99
coming soon $239.58
FORTHCOMING
ADDAC System ADDAC800X High-End Outputs Module (red faceplate)
Notes: Inspired by the legacy designs of premium vintage gear, the ADDAC800X behaves like a high-quality DI box and is all about keeping the sound coming from your Modular free from any undesired noisy interferences, making sure that what you're getting from your outputs is what your Modular is actually producing. It provides galvanic electrical isolation between the Modular system and external sources preventing impedance mismatch and ground loop induced hum. ADDAC's 800X circuit is designed around a unity 1:1 type nickel core Hammond Audio Transformer from the 140UEX series (equivalent to Jensen audio transformers).

Operating in the 20 Hz to 20 KHz range and providing exceptional shielding from external sources, this impedance matching transformer provides the 800X with two fully balanced high-end outputs (via XLR connectors).

Applying a transformer balanced output isolation has lots of advantages over other less expensive ways for dealing with ground loop issues. This method provides the chance to set a very simple and clean circuit in which the signal transfer process develops smoothly and humming free. The transformer is a device that performs both signal balancing and high-to-low (or vice-versa) impedance conversion, while rejecting straggled DC voltage and Radio Frequency Interference from signal passing through a magnetic bridge. In a transformer, two (or more) coils (called windings) of insulated wire wound around a magnetic metal core allow for its input(s) and output(s) not to be physically connected together. When an AC signal passes through the input winding (the primary), a perfectly related AC signal appears on the output winding (the secondary). This way, by the fact that signal flows via inductive coupling between the two windings of the transformer, the ADDAC 800X presents a most accurate electrical isolation between its input and output. A same number of windings on each coil guarantees that there's no gain loss when audio signal passes from the primary to the secondary windings. Furthermore, since these two windings are insulated from each other, the transformer will electrically isolate the 800X from any other device, preventing hum problems coming from an outsider ground.

LEFT IN will output sound to both channels.
Through RIGHT IN, signal will only find its way on OUT 2 (if the LEFT/RIGHT toggle is lifted up, RIGHT IN will be ignored and LEFT IN will be present in both OUTs). With both INs connected you'll have two separate outputs (LEFT IN -> OUT 1 & RIGHT IN -> OUT2). However, lifting up the LEFT/RIGHT toggle you'll also find RIGHT IN ignored and LEFT IN will fed both OUTs.

Each TRANSFORMER ISOLATED OUTPUT section has its signal overload warning led and two dedicated toggle switches: one that works as a simple amplifier / attenuator pad to +6dB / -10dB respectively, and a LIFT/FLOAT/GND toggle. This last one is a 3-way selector that lets you choose between lift, ground or floating ground (toggle's middle position) to be taken as reference for the ground point. In the LIFT position the module circuit will be lifted to ground through a 100R resistor and a 10nF capacitor and pin 1 of the XLR connection will act as the ground point. Choosing GROUND will put ground to be shared between inputs and outputs. Floating ground will leave ins and outs grounds completely apart from each other. Any of these three positions may be the best form of avoiding ground loops or any other undesired interference occurring between your modular and the sound system you're plugging it into. Try out which one of this options will work the best in a given situation.

An HEADPHONES AMPLIFIER (with VOLUME knob) connection is available for quietly working with your modular or pre-listen your sounds before making them public matter in a live situation. This section features an OPA2134 High-Performance Audio Operational Amplifier. This device presents the ideal characteristics for use with an headphones set, like ultra-low distortion and low-noise fully specified for audio applications, in combination with high-output drive capability and excellent DC performance that altogether allow for high-dynamic headroom and really superior sound quality.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 6.7 cm

Electrical:
. Max current: 100mA? on each rail
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$449.54
coming soon $434.50
FORTHCOMING
ADDAC System ADDAC807C VC Stereo Mixer Expansion Module (black faceplate)
Notes: The ADDAC807 VC Stereo Summing Mixer can provide up to 9 stereo channels of supreme Eurorack audio.

The main modules ADDAC807A and ADDAC807B can be expanded via the ADDAC807C Expansion Console for 4 additional stereo channels.

MECHANICAL:
Format: Eurorack
Width: 38 HP
Depth: 4.5 cm
Weight: 0.6 kg (1.3 lb)

CONTROL VOLTAGE I/O:
CV inputs: i 5v

ELECTRICAL:
Max current: 250mA on each rail
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$674.31
coming soon $652.30
FORTHCOMING
SynthRotek 308 Distortion Module (black faceplate) (fully assembled)
Notes: Get ready for the bright lights of the colosseum!

SynthTotek have taken the rock-solid RAT clone, squeezed it into a Eurorack module and added CV control over Gain. The 308 will take your playing to new heights with tremolo and other distortion modulation techniques.
Read more
MRP:$125.45 SAVE 19%
coming soon $101.26
FORTHCOMING
SynthRotek ADSR Envelope Generator Module (black faceplate) (fully assembled)
Cat: 778161
 
ADSR envelope generator module
Notes: The Synthrotek ADSR is a small and simple envelope generator with some very useful features. CV is additive for overall length of ADR stages in ADSR mode and add even more length to just the Release stage by adding CV into the Release jack. AR mode allows for snappy to long dynamic rhythm lengths. Very short minimum lengths, self cycling and a maximum output of 5 volts makes this tiny (4HP) envelope a very feature packed and versatile module.

Read more
MRP:$156.82 SAVE 19%
coming soon $127.40
FORTHCOMING
SynthRotek ECHO Voltage Controlled Echo Module (black faceplate) (fully assembled)
Cat: 778205
 
voltage controlled echo module
Notes: The ECHO (formerly known as the EKO) is a compact voltage-controlled echo/delay comes in the very tidy size of 4HP and is certain to be one of the best bangs for your buck.

A very unique echo using the PT2399 IC featuring Voltage Controlled Rate. Manual controls for Rate, Feedback, and Mix. Beautiful and bizarre, CV modulation of the rate brings in ghostly pitch bent sounds to metallic reverbs. An effects module that everyone needs in their rig.

ECHO Rate CV accepts -5 / +5 voltages (although the negative range is almost -7)

ECHO Rate knob is setup to push the chip into extreme territory and will extend past the "useable" range of the PT2399 IC, meaning that once you turn the knob past 3 o'clock or so, the chip will stop operating and you'll only hear your dry signal.

Attenuation, attenuversion, or using an offset will greatly help when running voltages into the Rate CV input. This way, you can tailor the modulation as you see fit. You will absolutely get the most out of your ECHO by using modules that attenuate, invert or offset your signal.
Read more
MRP:$125.45 SAVE 19%
coming soon $101.26
Artículos del 101 al 150 de 544 en la página 3 de 11
«  1  2  3  4  ...  11  »

Filter

Coming Soon: Studio Equipment
Close