100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

Inicio  Coming Soon  

Studio Equipment

Options
Artículos del 201 al 250 de 268 en la página 5 de 6
«  1  2  3  4  5  6  »
FORTHCOMING
Solid Gold FX Communication Breakdown Dual Fuzz Effects Pedal
Cat: 792803 Rel: 31 Dec 20
 
Fuzz pedal
Notes: Sporting two different modernized takes on the legendary Tone Bender circuit in one box, Communication Breakdown is an unabashed sonic love letter to the glorious fuzz tones of yesteryear.

This pedal is ready to reveal the stairway to tone heaven through its wide gain range, intuitive tone controls and the ability to use the two channels individually or together. From clear and refined low-gain grime, crushing walls of sound to beautifully compressed and singing leadtones, Communication Breakdown is sure to bring all of the good times and none of the bad.

Adding not one, but two amazing fuzz pedals to your collection, all in one compact box of gainy goodness. Fuzz A is born out of the fire and flames of the rare Tone Bender MK1.5, but brings it into the modern era by using hotter silicon transistors than the original. This results in a wide range of extremely powerful yet refined fuzz tones.

Fuzz B, on the other hand, takes a page (see what we did there) from the book of the classic Tonebender MKII, and preserves everything good and great about that snarling, saturated and compressed box of fuzzy wonder. But as an extra bonus, we added our JFET pre-amp to the equation in order to breathe more stability and tonal clarity into this legendary circuit.

But the really cool part is of course that you can use the two channels either individually or together, seeing you jump from a hairy rhythm tone to a soaring lead in seconds, or lets you sculpt unique dirt tone never heard before.

Each channel sports the same super intuitive controls, so you won't be left dazed and confused exploring its vast fuzzy playground. Besides the ubiquitous Fuzz and Volume controls, each side has a Bias knob, whichlets you vary the voltage sent to the circuits. Clock-wise will give you beefy and bold dirt tones, whereas counter-clockwise sees it unleash a more lean, choppy and gated fuzz tone.

On top of that you can further sculpt the overall tone of each side viathe simple three-way Color toggles, for everything from bright and biting full-range tones to smooth and dark, while the Input toggles let you adjust the input attenuation of the pedal, making sure that it plays well withany wahyou want to put in front of it.

So whether you're a classic fuzz connoisseur looking to nail history defining dirt tones or simply searching for a versatile fuzz pedal to jump-start your creativity, then the Communication Breakdown is sure to deliver.

KNOBS, SWITCHES, ETC.

Fuzz Knobs: Want less fuzz? Turn these suckers to the left. Boom, you're there. Want some more fuzz? Of course you do. Just take these fellas on a spin to the right.

Bias Knobs:These knobs vary the voltage to the collector of the second transistor. Turn 'em clockwise to fatten up your fuzz, or turn 'em counter-clockwise for a lean, choppy, gated fuzz tone.

Vol Knobs: Makes things louder, or less loud. Note: when running both sides at once, Side B's Vol control becomes the "master volume" while Side A's control becomes a "saturation" control.

Input Switch: These three-position switches adjust the input attenuation and wah friendliness of each side. "Right" is no attenuation. "Center" heavily cuts gain and bass, and "left" mildly cuts gain and bass. The center and left positions help adapt the Communication Breakdown to a more wah-friendly fuzz.

Color Switch: These are special three-position EQ controls that help you dial in your fuzz even further. "Left" rolls off some high-end and scoops the mids, "right" rolls off even more high-end and scoops even more mids. "Center" bypasses the EQ entirely.

Internal DIP Switches:Each side contains a DIP switch that toggles between Bold and Comp settings. Bold increases the output level and the midrange content, Comp delivers a softer and more compressed tone. Comp is the default setting, feel free to switch it up.

Input/Output:Instrument or other pedal goes on the right side; Amplifier or other pedal goes on the left side.

True bypass Footswitches:Turns each side of the effect on and off. Both Fuzz A and Fuzz B are independent.

Power:This pedal requires a center-negative 9 VDC power adapter with at least 10mA of current (not included). There is no option for a battery.

DIMENSIONS:

4.67" x 3.68" x 1.18" (119mm x 94mm x 30mm)
Read more
MRP:$327.93 SAVE 22%
coming soon $255.43
FORTHCOMING
Solid Gold FX Beta MKII Bass Preamp & Overdrive Effects Pedal
Cat: 792797 Rel: 31 Dec 20
 
Preamp & bass overdrive effects pedal
Notes: With more and more bass players using pedals these days, its no surprise that four-stringers are looking to pedals to sweeten their tones. Sometimes, bassists must play direct, sometimes there are mix issues, and bass players are often required to keep their tone, and thus pedal selection, "tasteful" in the traditional sense. What if there was a pedal that answered all of these, and that it was dead simple to dial in right out of the box? There it is- the Beta MKII, you just might call it "the answer".

The Beta MKII is a beefed-up version of the original Beta circuit, giving you plenty of tube-like gain without the fizz or hassle. Two modes of operation dictate the amount of grime, tonal colorization, or both. These modes are Preamp and Overdrive.

The Beta MKII's Preamp side disengages the Gain control for a smooth, even-keeled preamp colorization. Both Tone and Volume controls are active in this position, for a subtle sweetening that you'll never turn offithink of those old Muscle Shoals tones or an Ampeg B15 Portaflex.

Flicking the switch to Overdrive mode reconnects the Gain control and gives you as much breakup as you could want, giving you harmonically-rich overdrive without being too aggressive or snappy. It sits just the way you want it to without overpowering anyone else. You'll be a better bandmate as a result.

Due to the expertly voiced EQ of the Beta MKII, you can warm up any lifeless rig, boring recording console or sterile mixer while still retaining dynamics and low-end. Perfection.

KNOBS:

Gain: Turn it up to give you a good amount of smooth, buttery gain that won't disrupt your low frequencies (hooray!)

Tone: Turn it left for a darker tone, turn it right for a brighter one.

Vol: Plenty of output to keep your amp nice and tight.

TOGGLE SWITCHES:

Mode: Two positions give you utmost flexibility. The left position gives you Preamp mode, which delivers a lighter, more tailored gain range that keeps you present. The right side is Overdrive mode that opens the Beta's full gain range up.

AUXILIARY:

Input: Instrument or other pedal goes here.

Output: Amplifier or other pedal goes here.

True bypass footswitch: Turns the effect on and off.

POWER:

The Beta MKII requires a center-negative 9-18VDC power adapter with at least 6mA of current (not included). Almost all power supplies meet this requirement, but check yours beforehand.

DIMENSIONS:

4.39" x 2.34" x 1.06" (112 x 60 x 27mm)
Read more
MRP:$186.05 SAVE 20%
coming soon $148.35
FORTHCOMING
Solid Gold FX Electroman MKII Oscillating Delay & Modulation Effects Pedal
Cat: 792811 Rel: 31 Dec 20
 
Delay + modulartion pedal
Notes: The debate over which type of delay is "the best" is one that has plagued guitar shops and internet forums for half a century. On one hand, we have analog purists that prefer the murky degraded repeats of an analog delay, while digital users prefer the exacting repeats of ones and zeroes. But Solid Gold simply like delays that are excellent, and the Electroman MKII is just that: An excellent, feature-rich delay that does everything right.

The core of the Electroman MKII is two cascaded digital delay lines, making bold strides in the arena of PT2399 chips. The PT2399 is a chip developed for DJ rigs and karaoke machines, and when tuned correctly, blurs the line between digital and analog.

The mode toggle takes advantage of that unique dual-line approach, giving you standard delay or one that sends the repeats only to the second chip for a cool half-time sound that will sit front and center on your next ambient or shoegaze record.

The second footswitch of the Electroman MKII retains our warp feature, which sends the repeats ramping up to self-oscillation for ambient textures and spatial soundscapes. But this time, you control the sensitivity with one of three settings on the warp toggle, from gentle nudging into infinity to instant freakouts.

Delay repeats are backed by an extremely musical modulation circuit, which has three selectable speed ranges and a generous flutter control, which increases the depth as you roll it up. This control turns the Electroman MKII into an instant tape echo simulator, where you can dial in just the right amount of digital wear and tear.

While the Electroman MKII is equipped with buffered bypass, the tails switch lets you decide whether or not the Electroman MKII chokes off the repeats when switched off, or leaves them trailing into your amp when bypassed. This feature lets you sculpt your sound just how you like, allowing for precision interplay with your other effects by affecting just one passage.

Level, repeat and time controls come standard, with the time control maxing out at 1 second of warm delay. The Electroman MKII's color knob will settle the debate between analog and digital snobs by shaving treble content from the repeats as the control is increased.

An extra jack on the left edge takes the Electroman MKII to the next level: The fx loop jack lets you connect a stereo Y-cable to as many auxiliary pedals as you like, with the looped effect applying itself to the repeats. Try an octave pedal for true space exploration, a ring modulator for a lo-fi delay and even a volume pedal for swells of repeats.

Tone is always the goal, so if you want an outstanding delay unit that hacks through the vines of tiered menus and other complicated fluff, let the Electroman MKII be your machete.

KNOBS:

Level: Changes the amount of wet signal from nothing at all to highly involved.

Repeat: At zero, you'll find the humblest of all delays: the slapback. At full-blast, the repeats will run away and overtake your signal.

Color: This control takes a little treble off the top as you turn it. Fully left is bare-naked digital, and turning it up increases the murk.

Flutter: Controls the modulation depth. Keeping this control at zero shuts the circuit off.

Time: Changes the delay time from a double tracking-esque 70 milliseconds to a full lengthy second.

TOGGLE SWITCHES:

Warp (toggle): Changes the intensity of the Warp footswitch across three modes, from subtle (center) assertive (left) to imminent lift-off (right).

Mode: Changes between standard delay (left) and a special second mode(right), which sends the repeats slamming into the second delay line at half time.

Speed: Offers three different speed settings of the modulation circuit - slow in the center position, fast when toggled right and medium in the left position. See also: flutter knob.

Tails: The Electroman MKII is buffered bypass, and this switch lets you decide how you want the repeats to behave with the pedal switched off: choked off when switched left, or trailing when switched right.

AUXILIARY

FX Loop Jack: This jack lets you attach a stereo Y-cable, allowing you to patch in any number of effects. These effects let you apply external effects only to the repeats, for endless amounts of fun. You can even run a full external pedalboard in this loop. We won't tell. In addition, the loop also doubles an an expression input to control the level knob.

Input: Instrument or other pedal goes here.

Output: Amplifier or other pedal goes here.

Warp Footswitch: Engaged self-oscillation when and where you want it, and relents when you release it.

True Bypass/Trails Footswitch: Turns effect on and off.

POWER:

The Electroman II requires a center-negative 9VDC power adapter with at least 40mA of current (not included). Almost all power supplies meet this requirement, but check yours first.

DIMENSIONS

4.67" x 3.68" x 1.18" (119mm x
Read more
MRP:$327.93 SAVE 21%
coming soon $257.65
FORTHCOMING
AniModule TikTok Module
AniModule TikTok Module (clock modulator synth module)
Cat: 793800 Rel: 31 Dec 20
 
Clock divider & multiplier module
Notes: The TikTok is a 4HP Clock Divider/Multiplier.
It has Divisions and Multiplications of:
*//2
*//3
*//4
*//5
*//6

There is a Clk Input and a Reset Input.
Both are buffered with an opamp based comparator circuit.
They are looking for approximately +1.1V on a rising edge.
This means that you are not constrained to gate (pulse) signals to trigger them.

The Reset input resets your divisions clock counter to 1

There is a switch to select Mathematical or Musical divisions.

The Multiplication Outputs 25MS Trigger pulses.
The Division Outputs are on as long as your Clock source.

Avg Current draw:
40 mA
-9 mA
Peak Current Draw:
80 mA
-17 mA

Width = 4HP
Depth = 38mm
Read more
MRP:$196.76 SAVE 17%
coming soon $163.95
FORTHCOMING
AniModule AnVilope Module
AniModule AnVilope Module (clock generator / envelope generator / LFO synth module)
Cat: 794381 Rel: 31 Dec 20
 
Envelope generator module
Notes: A Simple, Affordable, 4HP, Analog Envelope Generator.

Attack, Decay, Release... Simple.

- Envelope Out 0V to +7V
- Loop function so you can use it as a Variable Wave-Shape LFO / Timer
- Inverted out that goes from +7V to 0V

Function:
When the gate is High the envelope will rise and cycle through it's phases.
When gate goes low again the envelope will revert to the release phase.

If the Gate is longer than the ADR phases, the decay will play out then go to release and the envelope will end after the release.

Sprinkle them all over your system!

4HP Depth : 28mm
Read more
MRP:$115.11 SAVE 17%
coming soon $95.92
FORTHCOMING
Tesseract Modular Douts Direct Outs Module For Tex Mix
Cat: 800365 Rel: 28 Feb 21
 
Mixer/multiple/utility synth module
Notes: Direct Outs for TexMix & 3,5mm to 6,3mm converter.

This is a breakout box for the direct outs of the TexMix. Each module has 8 outputs so it could have 2 '4MonoChannels' connected or 1 '4StereoChannels'.

Without connecting the ribbon cable it's a 3,5/6,3 adapter.

The orientation of the 8 pin ribbon cable is marked by the 'DIRECT OUTS ' legend on the PCB of the channel expanders (mono or stereo) and a white line in the DOUTS input header.
Read more
MRP:$34.80 SAVE 17%
coming soon $28.99
FORTHCOMING
AniModule Line_Amp Module
AniModule Line_Amp Module (multiple / preamp / utility / dual stereo / external synth module)
Cat: 793793 Rel: 31 Dec 20
 
Buffered multiple module
Notes: Check out AniModule's Line to Synth Level Converter.

2 Channels of 1 in <--> 2 Out.

Each channel is designed to multiply your input by *3 to boost your Line Gear / Tablet / Phone so you can integrate audio OR Control Voltages from your auxiliary systems.

Each channel's input is designed with Line Level gear's input impedance in mind.

Perfectly compatible with Synth Output Impedances, but the standard Synth Input Impedance is higher than Line level equipment is expecting.

Don't need to amplify your XPhone right this minute? Never fear! Just Hit the Switch!

This module won't sit unused in your cabinet breeding resentment and dust bunnies.

Hit the switch and that channel becomes a normal 2 HP Unity Gain Buffered Mult.

Only need one channel of each? It's YOUR Choice!
Read more
MRP:$111.10 SAVE 17%
coming soon $92.57
FORTHCOMING
Michigan Synth Works USB2MIDI 5 Port TRS MIDI Output Module (black faceplate)
Cat: 802353 Rel: 18 Jan 21
 
TRS MIDI output module
Notes: This device provides 5 TRS MIDI out ports in a slim 2HP package.

5 MIDI OUT (only) ports, 16 channels per port

25mm depth

3 Aux headers for internal MIDI connections (ports 1-3)

TYPE A TRS MIDI Standard

Solid Ploytec GM5 technology

Class compliant USB
Read more
MRP:$105.74 SAVE 22%
coming soon $82.53
FORTHCOMING
Michigan Synth Works 2HP2CV USB to CV Adapter Module (black faceplate)
Cat: 802356 Rel: 18 Jan 21
 
USB to CV adapter module
Notes: 2HP adaptation of Mutable Instruments CVpal

Width: 2HP

MINI USB connection

LED indicators for Gate activity

Depth: 17mm

Fully Calibrated
Read more
MRP:$70.94 SAVE 23%
coming soon $54.65
FORTHCOMING
Michigan Synth Works F8R Output Expander Module (black faceplate)
Michigan Synth Works F8R Output Expander Module (black faceplate) (controller/expander/MIDI/multiple synth module)
Cat: 802350 Rel: 18 Jan 21
 
Output expander module
Notes: F8R Output Expander adds 3 TRS midi outputs (multiples of the MIDI out of the 8m), 3 fully buffered I2C TRS headers, and an optional 1x3 TRS Through.

I2C:

The 3 I2C outputs are fully buffered and allow for very long connections to other devices. They are all multiples of the I2C output of the 8m.

MIDI:

MIDI Out: Single Output from 8m. If nothing is plugged into this jack, the MIDI data is forwarded to the 1x3 MIDI through.

MIDI IN: MIDI input to the 1x3 MIDI through, connecting an input will disconnect the MIDI out from the 8m. This input can accept TRS MIDI A or B cables

Multiple MIDI Outs: Fully buffered midi outs

2HP Width, 22mm Depth, TRS MIDI TYPE A outputs

Current Draw: N/A, Connects to 8m
Read more
MRP:$70.94 SAVE 23%
coming soon $54.65
FORTHCOMING
Michigan Synth Works BLN Audio Level Converter Module (black faceplate)
Cat: 802359 Rel: 18 Jan 21
 
Audio level converter module
Notes: BLN is a 4 channel audio level converter designed to interface line or "pro" audio levels to modular audio levels. It features 2 independent converters with 2 channels each.

Converter 1: Line level/Balanced to Modular Level

The inputs for the top converter are for converting -10dB or +4dB signal levels (balanced or unbalanced) to +/-5V modular levels. Each channel can be set individually for +4 or -10 using channel 1 and 2 of the DIP switched

Converter 2: Modular level to Balanced Lined

The inputs for the bottom to converters accept a +/-5V modular audio level and converts them to a BALANCED +4 dB or -10 dB audio level. Each channel can be set individually for +4 or -10 using channel 3 and 4 of the DIP switched.

For balanced signals, simply use a 3.5mm TRS to 1/4" TRS Cable or 3.5mm TRS to 3.5mm TRS cable with a 1/4" TRS adapter. Unbalanced signals should use a 3.5mm TS cable

2HP Width, 32mm Depth

Current Draw: 12/14 mA +12/-12

Please note: This devices uses a polarized power cable, please make sure the red stripe corresponds to the white stripe on the board
Read more
MRP:$105.74 SAVE 22%
coming soon $82.53
FORTHCOMING
Michigan Synth Works XVI 16-Channel Fader Bank Module (black faceplate)
Cat: 802361 Rel: 18 Jan 21
 
16-channel fader bank module
Notes: XVI is a 16 channel, 44hp control surface for Eurorack
Read more
MRP:$358.72 SAVE 31%
coming soon $246.50
FORTHCOMING
Michigan Synth Works F8R 8 Channel Fader Bank Module (black faceplate)
Cat: 802345 Rel: 18 Jan 21
 
8-channel fader bank module
Notes: F8R is a 8 channel, 16hp control surface for Eurorack

16HP Width, 20mm Depth
Current Draw: +12V 50 mA, -12V 40 mA

Basic Usage instructions:

Front:

Voltage Select switches: Independent for each channel. Does NOT affect MIDI/I2C data

Slider LED color: To change the LED color, simply remove the cap and rotate the square LED 180s. Do NOT force the LED back in, it should slide in easily, may require wiggling.

Rear:

Power Header: Standard 10pin power cable, there is NO polarity for this connection. It can be connected either way

MIDI Out Header: This is a 4 pin header but only 3 or 2 connections need to be used. To connect to a DIN cable, either GND, 5 (to pin 5, current sink/aka -), and 4 (to pin 4, current source/aka +) should be used. For internal module to module connections, only pin 4 and 5 should be used. The ground pin is only for the shield in a midi cable, it is never connected on a midi input and isnt necessary for the short module to module lengths

I2C Header: 3 pin header to connect to other I2C devices in your rack, this is an unbuffered connection so cable lengths should be as short as possible (20cm/6" recommended). There are 4.7k pull up resistors on this connection

Module Orientation jumpers: There are 3 of these jumpers which determine how the module operates depending on if the jacks are on top or bottom. They will come installed in the position matching your panel but can be changed should you want to flip it. "INV" is Jacks on Top, the white position is jacks on bottom. Changing these jumpers will change the numbering of the faders from left to right (1->8) in both MIDI and I2C and will invert the voltage response (i.e. 10->0V from top to bottom). The jumper is shown in the "jacks on top" position in the pic below. ALL THREE JUMPERS MUST BE IN THE SAME POSITION for the module to operate correctly.

Module Config DIP switch: This allows you to switch between I2C Follower and I2C Leader modes easily. Simply move the switch to the "lead" position and restart the module (you can press the blue reset button once). The other 3 positions are for future expansion and not currently implemented.

Connector for Expander: This connects the F8R to the I/O expander. The cable is attached to the expander. Note the keyway at the top of the part, the connecter will ONLY connect one way
Read more
MRP:$281.09 SAVE 31%
coming soon $192.96
FORTHCOMING
Neutron Sound QMIX Quad Mixer (black faceplate)
Cat: 802487 Rel: 18 Jan 21
 
4-channel mixer module
Notes: Neutron QMIX is an 8HP 4 channel mixer which can be expanded with internal jumpers and additional QMIX modules. The device has 2 mix outs and 2 AUX outs. The AUX out can be mixed from pre or post fader. LED sliders available in Red or Green. LEDs on the sliders show the input signal level (not the mix level).
Read more
MRP:$140.54 SAVE 31%
coming soon $97.03
FORTHCOMING
Neutron Sound QVCA Quad VCA Module (black faceplate)
Cat: 802489 Rel: 18 Jan 21
 
Quad VCA module
Notes: Neutron QVCA is an 8HP, 2164 based channel VCA with switchable linear or log response.The audio and CV inputs are chain normalized from 1 to 4. Red LEDs. DC Coupled inputs.
Read more
MRP:$226.21 SAVE 32%
coming soon $153.91
FORTHCOMING
AniModule STD Syncopated Timing Disruptor Module
AniModule STD Syncopated Timing Disruptor Module (clock generator / clock modulator / logic synth module)
Cat: 793790 Rel: 31 Dec 20
 
Syncopated timing disruptor module
Notes: The STD, or Syncopated Timing Disrupter is a dual tap tempo clock with CV control for clock division and multiplication. If one wishes to synchronize the STD with other clocked gear, there is also a Gate input. The CV inputs can shift the clock to being upto 8x faster or /8 to be slower. This function is voltage controllable to turn the STD into a nonstop groove machine. Included in this are three logic functions that output gates depending on how the two channels are interacting. There is OR, ADD, and XOR logic functions.

2 Independent Tap Tempo Clock Channels
Prefer to use a Gate? No Prob! Just Patch in to the Gate Input.

Use the Div/Mult/Offset Pot to Multiply or Divide your Clock Time up to *8 - /8

Or patch In to the CV Input to Modulate the Mathematical Madness!
When CV is being input the Div/Mult/Offset Pot behaves as an Offset.

CV Input wants 0V to +5V, but whatever you got, Between the Offset, and the Front Panel CV Attenuators, it's easy to dial in your desired range of "On the Fly" Mathematical Clock Time Modulations.

Want to sync the 2nd channel to the first?
Latch the Ch1 - Ch2 switch and the Output of Channel 1 is normalled to the jack Switch of Channel 2.
You can still control the Multiplications / Divisions of each channel Independently!

If that wasn't enough to get you poppin' penicillin prophylactically there's more!

The bottom row of jacks constantly output OR, AND, and XOR Logic Combinations of the 2 channels combined!

Want to use something funky (like a Sine Wave / Envelope / Random Voltage Generator) to set the rhythm? The Input is a Buffered Comparator set to trigger at any signal above +1.2V

Perfectly happy up in to the Mid- Audio range.

6HP
+44mA
-16mA
Read more
MRP:$220.85 SAVE 17%
coming soon $184.03
FORTHCOMING
AniModule MIDI_Gate Module
AniModule MIDI_Gate Module (MIDI synth module)
Cat: 793791 Rel: 31 Dec 20
 
MIDI gate interface module
Notes: The AniModule MIDI_Gate is an easy way to integrate your MIDI-synced workflow with your Modular Synth.

10 Gate Outs that correspond to MIDI notes C1 - A1 (36 - 46).

MIDI NoteOn >> Gate is High

MIDI NoteOff >> Gate is Low

Programmed to receive on MIDI Channel 10

All this in 4HP!!!

Use it to send Multiple Clocks synced to your main Clock.

Use it to trigger events to effect samples piped in via a Line_Amp or TrAniModule in realtime in the analog domain for Live Performance or Resample.

Use it to interface in realtime with your Keyboard, Pad Based Controller, or DAW.

Width = 4HP

Depth = 33mm
Read more
MRP:$208.81 SAVE 17%
coming soon $173.99
FORTHCOMING
AniModule Gate_Mod Module
AniModule Gate_Mod Module (clock modulator / dual stereo / frequency divider synth module)
Cat: 793797 Rel: 31 Dec 20
 
Gate modifier & trigger delay module
Notes: Got a gate that's gonna make you late? Run it through the Gate_Mod! Got a trigger comin' sooner than you figger'd? Run it through the Gate_Mod!!

Let's face it, couldn't we ALL use a little more length?

This Tiny (yet powerful) Module allows you to manipulate your gate length and delay your event triggers with ease and minimal impact on your HP.

Take an incoming Signal above ~1.1V (OpAmp Comparators on the Inputs make very forgiving Clock Inputs) and shrink it down to 5MS or lengthen it up to 5 Seconds.

That Gate will appear at the Gate Out.

When the Gate is Over a 10MS Trigger will turn on at the Delay Out.

Set the length of the Gate with the Time Potentiometer OR with the CV Input.

The switches allow you to choose between Interrupt OR Dividing Behavior (1 for each channel).

If you have Interrupt selected, when Clock In receives a new Clock Pulse the time will reset, essentially lengthening your Gate Out and Delay Out to the Time you have set + the time that has already elapsed.

So Gate will never go Low and Delay will never go High if you have a Time set longer than the interval between Clock Pulses (Useful if you have staggered, irregular or random Clocks).

When Dividing is selected Clock In will Ignore new Clock Pulses until it has finished the current cycle it's running.

The Delay 1 Out is Normalled via the Jack switch of the Clock 2 Input for all kinds of Timing madness!

Width = 4 HP
Depth = 37mm
Current Draw:
+12V = 35mA
-12V = -18mA

*The Gate_Mod firmware has been updated as of Mid August 2015. There was a bug in the Delay Out section that prevented it from resting at full 0V. All Gate-Mods shipped After the Firmware was updated include the new revision.
Read more
MRP:$196.76 SAVE 17%
coming soon $163.95
FORTHCOMING
Michigan Synth Works Twiigs Quad Bernoulli Gate Module (black faceplate)
Cat: 802372 Rel: 18 Jan 21
 
Signal input module
Notes: This is 2 x opensource branches. The input of channel one is normalled to all other inputs so you can run this as 1 to 4, 2x 1 to 2, etc. Dual Color LEDs on sliders
Read more
MRP:$246.28 SAVE 27%
coming soon $180.68
FORTHCOMING
Michigan Synth Works Quarks Module (black faceplate)
Cat: 802181 Rel: 18 Jan 21
 
Modal synthesiser
Notes: Micro Module based on Opensource Elements. Includes illuminated attenuverters to indicate positive/negative input voltages.
Read more
MRP:$388.17 SAVE 19%
coming soon $313.42
FORTHCOMING
Neutron Sound Dust Of Time Dual Stereo Oscillator Module (black faceplate)
Neutron Sound Dust Of Time Dual Stereo Oscillator Module (black faceplate) (CV modulation/digital/MIDI/oscillator/dual & stereo synth module)
Cat: 802481 Rel: 18 Jan 21
 
Dual stereo oscillator module
Notes: This is a dual stereo oscillator with built in modulators and utilities based on a teensy 3.6 micro controller.

Each of the 2 oscillator pairs have a few different methods, each with separate tuning, pitch modulation, and 2 parameters that can be adjusted and modulated with stereo offset or inversion of the modulation. Some OSC modes are procedurally generated, some are wavetables, and it can play waveedit files from the SD card. some methods are oversampled, some are raw.

All modulators are at full 50KHz sample rate except chaos, which is at 3KHz.

There are 4 DAHDSR with looping modulation and virus style slope sustain.

4 (resettable to actual degrees) LFO which can go from about 17 hours to 999.999Hz.

2 chaos attractors each with x and y outs (16 types ofchaos available).

2 fusers, which take 1-3 modulators and mix, multiply or otherwise combine them.

A sub oscillator
2. "control" modulators, any of the pots, midi velocity, mod or bend, can be selected.

4 CV ins and v/oct in are available as mod sources anywhere, 2 of them are at 25KHz sample rate, 2 at 3KHz.

2 gate/trigger ins, MIDI gate, and 2 internally generated gates are combined in a matrix to 4 gate/trigger buses.

2 aux CV outs, can be any of the mod sources or t/g buses.

Specifications:
Width: 16HP
Depth: 20mm
Power Consuption: 90 mA +12/20 mA -12
Read more
MRP:$468.48 SAVE 31%
coming soon $321.23
FORTHCOMING
Neutron Sound QAT Quad Attenuverter Module (black faceplate)
Neutron Sound QAT Quad Attenuverter Module (black faceplate) (attenuator/CV modulation/mixer/utility synth module)
Cat: 802483 Rel: 18 Jan 21
 
Quad attenuverter module
Notes: Neutron QAT is a 8HP, 4 channel attenuverter with switchable linear or audio taper potentiometer response. individual,pre and post attenverter mix outputs are available. Red/Green LEDs.
Read more
MRP:$140.54 SAVE 31%
coming soon $97.03
FORTHCOMING
Sensel Azerty Tactile Keyboard Overlay For Morph MIDI Controller
Cat: 785471
 
Overlay
Notes: Turn the Morph into a wireless keyboard with one of our 3 keyboard overlays. Boost your mobile productivity with tactile key action, function keys, media controls, and customizable shortcuts. Use the SenselApp to adjust for Windows and Mac layouts, so your muscle memory stays intact!

Features:
Soft and quiet, with mechanical feedback - feels fantastic to type on
Wireless Bluetooth connectivity with PC, Mac, iOS (iPhones, iPads) and Android
Hotkeys for PC/Mac
Trackpad below space bar

Specs:
Weight: 0.4 lbs | 182 g
Dimensions: 9.5 x 5.5 x 0.3 in | 24 x 14 x 0.8 cm

*This overlay is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with QWERTY, Morph with AZERTY, or Morph with DVORAK.
Read more
MRP:$45.51 SAVE 17%
coming soon $37.92
FORTHCOMING
Sensel Innovator's Overlay For Morph MIDI Controller
Cat: 785466
 
Overlay
Notes: Quickly and easily design fully custom layouts with drag-and-drop tools in the Sensel App, export and print on paper, and then secure paper under the transparent Innovator's Overlay.

Quickly iterate with the Innovator's Overlay before you 3D-print your custom design to make sure its just right.

With Sensel's open-source API, the Innovator's Overlay provides an ideal medium for your creations.
*This overlay is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with Innovator's Overlay.
Read more
MRP:$45.51 SAVE 17%
coming soon $37.92
FORTHCOMING
Sensel Video Editing Overlay For Morph MIDI Controller
Cat: 785467
 
Overlay
Notes: Put simply, the Video Editing Overlay (VEO) is a specialized keyboard for video editing, designed to simplify your workflow.
But it's also so much more. Navigate with ease using the jog wheel and force-sensitive shuttle controls. Speed up your workflow by reducing complex multi-finger shortcuts to a single tap. Use Sensel's default mapping or create your own custom mappings.
Go here for reviews about the VEO, and visit our blog post for more details.
*The VEO is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with Video Editing Overlay.

Software Compatibility
By default, the key commands on the VEO are mapped for with Adobe Premiere Pro. However, it can also be easily remapped in the SenselApp to adapt to any editing suite, such as Final Cut Pro, Luma Fusion, or DaVinci Resolve.
Read more
MRP:$45.51 SAVE 17%
coming soon $37.92
FORTHCOMING
Sensel Travel Case For Morph MIDI Controller (light gray)
Cat: 785478
 
Travel case
Notes: Stay organized and mobile while protecting your gear.

The Morph travel case is a convenient way to carry and protect your Morph, overlays, cables, iPad, paintbrushes and any other accessories that you use along with your Morph. Fits a Morph, iPad and 5+ overlays with ease.

Contains:
A padded exterior to protect your Morph from bumps and bruises
An interior sleeve to securely hold your Morph (and iPad)
Interior straps to hold cables, paintbrushes, drumsticks
An external zippered pocket for additional storage.

Specs:
Weight: 0.7 lbs | 319 g
Dimensions: 11 x 8 x 1.4 in | 28 x 20 x 3.4 cm
Read more
MRP:$32.12 SAVE 17%
coming soon $26.76
FORTHCOMING
Equinox Synth VCA Analogue Voltage Controlled Amplifier Module
Cat: 802082 Rel: 28 Feb 21
 
Analogue voltage controlled amplifier module
Notes: The VCA is all about controlling the volume of the signal, both attenuation and a bit of amplification. All without distorting the signal. The Equinox VCA is based on the very high performance THAT Corp 2181 Blackmer trimmable VCA ICs, often found in top end studio hardware. We have kept component count to a minimum to ensure the audio signal path is kept as clean as possible.

The two controls on the Equinox VCA are for overall volume and the CV Depth. The CV input controls how much the signal is attenuated or amplified, this would usually be controlled by an envelope generator, such as the Equinox ADSR. This gives the artist control over how the amplitude or volume of a sound evolves over time. From hard hitting kicks to gently evolving pads, the VCA is the primary module for precise volume control within the modular synthesiser.

Current Draw: +12V: 20mA, -12V: 20mA

Depth: 25mm

HP: 4HP
Read more
MRP:$93.70 SAVE 17%
coming soon $78.07
FORTHCOMING
Edifier 4003653 SS02 Speaker Stands For S2000Pro /S1000DB/S1000MKII (pair, brown/black)
Cat: 794311
 
Paired 26.5" wood grain speaker stands for S2000Pro /S1000DB/S1000MKII
Notes: The S2000Pro/S1000db/S1000MKII stands are a great addition to any home or studio audio set up. It adds style and functionality all in one. The S2000pro/S1000db/S1000MKII stands are a breeze to set up and enhances the look and feel of any environment its in. The atmosphere changes once we set our eyes on the clean lines and wooden finish of these speaker stands.

The well-designed S2000pro/S1000db/S1000MKII speaker stands place the speaker on a solid platform, which helps achieve the best overall sound quality, especially bass. The elegant design negates the effect that vibrations may cause.

Hollowed design - ready to fill with sand to increase stability and eliminate resonance.
Read more
coming soon $161.73
FORTHCOMING
Edifier 4004964 R1280DBs Bluetooth 5.0 Wireless Desktop/Bookshelf Speakers (black)
Cat: 794321
 
42-watt paired Bluetooth 5.0 speakers
Notes: Edifier 4004964 R1280DBs Black Powered Bluetooth 5.0 WirelessDesktop/Bookshelf Speakers Pair 42 Watts With Built in Amp and MultiInputs Includes Remote Control and Cables (Black)

Multiple Inputs: Optical, Coaxial, Bluetooth, Dual RCA, Subwoofer output

Removable Mesh Grille - The protective grill can effectively protect your speakers from dirt and other particles and can be easily removed for careful cleaning of speaker face.

Sub-out & OPT/COAX Inputs - When connected the sub-out automatically detects the subwoofer and activates the digital crossover. Optical and coaxial inputs make sure you will always enjoy music with lossless sound quality. Dual RCA inputs allow you to connect to two devices at the same time. Connect to your devices such as phone, PC, laptop, tablet or gaming console with included Fiber Optical input cable, RCA to RCA audio cable, and 3.5 mm-RCA audio cable, eliminates the need to switch cables.

Classic Wood Finish - These impressive speakers are made from MDF wood, designed to effectively prevent resonance. You will love how perfect it fits into your living room, study room, or bedroom.

Precise Control - The adjustable knobs on the side panel of the speaker allow you to adjust the bass, treble, and volume more accurately, press the volume dial to toggle input sources.

Wireless Remote - Adjust volume, mute/unmute, switch OPT/COAX mode, switch line-in, Bluetooth mode and switch sound field extension with the wireless remote, no longer need to heft yourself off of the couch every time you want to make some adjustments.

TOTAL POWER OUTPUT: R/L: 21W+21W RMS

BLUETOOTH VERSION: Qualcomm 3003 V5.0

FREQUENCY RESPONSE: 51Hz-20KHz

INPUT: LINE IN 1, LINE IN 2, Optical, Coaxial, Bluetooth

DRIVER UNIT: F13mm tweeter unit + 4-inch mid-woofer

SIGNAL-TO-NOISE RATIO: =85dBA

INPUT SENSITIVITY: LINE IN1 R/L:500i50mV, LINE IN2 R/L:600i50mV, Optical /Coaxial R/L:350i50mFFS,Bluetooth R/L:700i50mFFS

Includes RCA to RCA cable, RCA to 3.5mm cable, Fiber Optic input cable, Speaker Connnecting cable, Remote Control
Read more
coming soon $146.11
FORTHCOMING
Sensel Gaming Overlay For Morph MIDI Controller
Cat: 785468
 
Overlay
Notes: Remember all the times when you'd press harder on the game controller buttons hoping it would make you go faster? We do. In fact, those moments were at the top of our minds when we were creating the Gaming Overlay. Now, you can use pressure, gestures, and the simple layout of the device to beat your opponent and add that extra missing dynamic to your gaming.
*This overlay is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with Gaming Overlay.

Compatibility
The Gaming Overlay acts as a USB game controller, so it is compatible with anything a standard gamepad is. While most devices support this standard, not every game does, so you may need to use emulation software for some games. You can find more details in the Morph user guide.
Read more
MRP:$45.51 SAVE 17%
coming soon $37.92
FORTHCOMING
Sensel Qwerty Tactile Keyboard Overlay For Morph MIDI Controller
Cat: 785469
 
Overlay
Notes: Turn the Morph into a wireless keyboard with one of our 3 keyboard overlays. Boost your mobile productivity with tactile key action, function keys, media controls, and customizable shortcuts. Use the SenselApp to adjust for Windows and Mac layouts, so your muscle memory stays intact!

Specs:
Weight: 0.4 lbs | 182 g
Dimensions: 9.5 x 5.5 x 0.3 in | 24 x 14 x 0.8 cm
Read more
MRP:$45.51 SAVE 17%
coming soon $37.92
FORTHCOMING
Sensel Travel Case For Morph MIDI controller (pink)
Cat: 785476
 
Travel case
Notes: Stay organized and mobile while protecting your gear.

The Morph travel case is a convenient way to carry and protect your Morph, overlays, cables, iPad, paintbrushes and any other accessories that you use along with your Morph. Fits a Morph, iPad and 5+ overlays with ease.

Contains:
A padded exterior to protect your Morph from bumps and bruises
An interior sleeve to securely hold your Morph (and iPad)
Interior straps to hold cables, paintbrushes, drumsticks
An external zippered pocket for additional storage.

Specs:
Weight: 0.7 lbs | 319 g
Dimensions: 11 x 8 x 1.4 in | 28 x 20 x 3.4 cm
Read more
MRP:$32.12 SAVE 17%
coming soon $26.76
FORTHCOMING
Edifier 4004971 R1700BTs Bluetooth 5.0 Wireless Bookshelf Speakers (pair, brown)
Cat: 794344
 
Paired 66-watt bookshelf Bluetooth 5.0 speakers
Notes: Edifier 4004971 R1700BTs Powered Bluetooth 5.0 Wireless Bookshelf Speakers Pair 66 Watts With Built in Amp and Multi Inputs Includes Remote Control and Cables (Brown)

Rich and Detailed Sound

Soundfield Spacializer - Soundfield Spatializer simulates a larger soundstage with the touch of a button. This unique feature creates wide-filed sound by optimizing each channel, sending out opposite signals to eliminate mutual interference and improve separation.

Impressive Wood Finish - MDF wood with walnut wood finish-vinyl makes it a perfect addition to your living room, office, or study.

Bluetooth 5.0 with Qualcomm aptX - No wires required! Connect to devices using Bluetooth 5.0 technology. Enjoy listening from your phone, laptop, or tablet with wireless connection, works with iOS, Android, Mac, or Windows devices.

Eagle Eye Tweeter - 30W + 36W RMS undistorted power, 4 inch woofer, and 19mm silk dome tweeter, the Edifier R1700BTs active Bluetooth bookshelf speakers make even the hardly-noticeable sounds very clear. And the DSP(Digital Signal Processing) and DRC (Dynamic Range Control) helps to minimize distortion for improved audio even at low volume.

Multiple ways to connect - When connected the sub-out automatically detects the subwoofer and activates the digital crossover. Dual RCA inputs allow you to connect to two devices at a time. Connect to your devices such as phone, PC, laptop, tablet, or gaming console with RCA to RCA audio cable, and 3.5 mm-RCA audio cable, eliminates the need to switch cables.

Built-in Controls - Convenient dials on the side panel of the speaker allows you to adjust the bass, treble, and volume, press the volume dial to toggle between inputs.

Wireless Remote - Adjust volume, mute/unmute, switch inputs, Bluetooth, select sound field extension, and line-in mode with the wireless remote, no need to leave the couch.

Removable Grill - Protects your speaker drivers, easy to remove for cleaning.

TOTAL POWER OUTPUT: R/L(high): 15W+15W, R/L(mid-low): 18W+18W

BLUETOOTH VERSION: Qualcomm 3031/V5.0

INPUT SENSITIVITY: LINE IN 1: 700i50mV, LINE IN 2: 550i50mV, Bluetooth: 400i50mV

INPUT: LINE IN 1, LINE IN 2, Bluetooth

DRIVER UNIT: F19mm tweeter unit + 4 inches woofer

SIGNAL-TO-NOISE RATIO: =85dBA

FREQUENCY RESPONSE: 52Hz-20KHz

Includes: RCA to RCA cable, RCA to 3.5mm cable, Speaker Connecting cable, Remote Control, User Manual
Read more
coming soon $165.08
FORTHCOMING
AniModule DD Dual VCA Module
AniModule DD Dual VCA Module (CV modulation / panning / VCA / dual stereo synth module)
Cat: 794391 Rel: 31 Dec 20
 
Dual VCA module
Notes: A Dual VCA for Audio or CV.

Mod In 1 is Buffered, Inverted then Normalled to Mod In 2, to facilitate stereo panning and VC CrossFading without a bunch of support modules.

Don't want it? Just turn the attenuator down or plug a signal of your choosing in to the Mod In 2.

Current Draw: +12V = 25mA, -12V = -22mA

8HP, 28mm Deep
Read more
MRP:$206.13 SAVE 17%
coming soon $171.77
FORTHCOMING
Edifier 4004988 S1000DBMKII Bluetooth 5.0 Wireless Active Bookshelf Speakers (pair, brown)
Cat: 794392
 
Paired 120W Bluetooth 5.0 powered bookshelf speakers with built-in amp and multi inputs
Notes: Turn on the Speaker, Juice up the World - S1000MKII Audiophile Active Bookshelf 2.0 Speaker.

Includes Remote Control and Cables

120 Watts Stunning Sound Performance - A new Class D Amp boosts the system's already impressive power to a new height, crank the volume while still maintaining crystal clear audio.

Bluetooth 5.0 with aptX HD Decoding - Stream high-quality audio wirelessly with reduced latency and increased stability.

Titanium Dome Tweeter - A titanium dome is a high-quality unit that can only use in hi-fi level high-end speakers. Restore high-frequency signals up to 40KHz to obtain a clearer, brighter, transparent, and pure tone.

Simpler but Much More Stylish - Aluminum bass speaker for surge and wave bass, pure sound with advanced titanium dome tweeter. Designed with classic wooden side panels, the S1000 MKII is angled to ensure front-facing drivers positioned for optimum performance without compromise.

Metal Diaphragm, Medium Bass Unit - The 5.5-inch aluminum alloy mid-woofer unit has the characteristics of high strength and low distortion. By the precise analysis of the KLIPPEL system in Germany and the advantages of DSP full digital electronic frequency divider, the performance of the unit is more accurate, faster, cleaner, and more powerful.

DSP Digital Audio Processing - Built-in Texas instruments DSP professional audio processing chip TLV320AIC3254, and use its miniDSP to complete electronic frequency division and dynamic management for accurate control of frequency division point, so that the speaker can better display the sound details.

Multiple Inputs Connection - With its optical, coaxial, and auxiliary inputs, it can connect to multiple devices such as TV sets, TV boxes, Blu-ray player, game console, CD player, DVD, mobile phone, computer, tablet, or other devices.

Wireless Remote Control - Swap inputs, playback, or adjust the volume with the included remote while still able to sit on the sofa, help you to take full control of your sound wirelessly.

TOTAL POWER OUTPUT: RMS 25W×2(Treble) +35W×2(Mid-range bass)

FREQUENCY RESPONSE: 45Hz~40KHz

MIDRANGE / BASS UNIT: 5.5 inch

SIGNAL-TO-NOISE RATIO: = 90dBA

INPUT SENSITIVITY: Line in 1:750i50mV / Line in 2 :900i50mV OPT, COX: 350 mFFs i 50 mFFs Bluetooth: 450i50mV

Treble Unit: 1 Inch

Includes: RCA to RCA cable, RCA to 3.5mm cable, Speaker Connecting cable, Remote Control, User Manual
Read more
coming soon $362.51
FORTHCOMING
AniModule Lil' Monster VCO Module
AniModule Lil' Monster VCO Module (oscillator synth module)
Cat: 794393 Rel: 31 Dec 20
 
VCO module
Notes: At 8HP and 28mm deep this is A Frightening little Oscillator with Monstrous PWM, Sick, Sick Sync, and Terrifying FM capabilities!!

Great 1V/Oct tracking

Range from below to above the audible

All Waveforms respond to your Sync Input signal

Current Draw: +12V = 21mA, -12V = -21mA 8HP, 29mm Deep
Read more
MRP:$250.30 SAVE 17%
coming soon $208.58
FORTHCOMING
AniModule MixMan Module
AniModule MixMan Module (attenuater / mixer/ multiple / polariser / utility synth module)
Cat: 794394 Rel: 31 Dec 20
 
Mixer multiple & CV manipulator module
Notes: This quintessential module, while seeming fairly utilitarian, is practically Indispensable.

At only 8HP wide and 30mm deep
You can Mix, Mult, Invert and Offset your Audio and CV.

For starters there is a 3 Channel Mixer with x3 Buffered Outs.
Then there is a dedicated Analog Inverter.
Last but not least there is an Offset Manipulator.

The Offset Manipulator is designed to take a signal and combine it with an offset.
It will work fine without a signal coming in to it though. Just take the signal from the Offset Manipulator out and dial in your desired voltage.

The Offset Manipulator Out is Normalled to the 3rd Mix In Jack Switch. If you don't want your Mixer Signals Offset, Connect a plug to the 3rd Mix In Jack First, or just dial down the 3rd attenuator to 0.

The Mixer Out is Normalled to the Inverter In Jack Switch. That way you can have an inverted version of your MixOut at the Inverter Out without using an extra patch cable
Read more
MRP:$132.51 SAVE 17%
coming soon $110.41
FORTHCOMING
AniModule LogicOgic Module
AniModule LogicOgic Module (clock modulater / frequency divider / logic synth module)
Cat: 794401 Rel: 31 Dec 20
 
Logic module
Notes: This is a handy module. It's nice to have a few ORs and ANDs around when you're fiddling around with your clocks and percussives.

The Output from FlipFlop1 Q is normalled to the FlipFlop2 Input via the jack switch.

The NOT Q outs from the FlipFlops are fun to stagger your clock pulses or use as a Sub-Oscillator. The Inverter/Buffer can be sent to a Gate-Trigger converter and back to the OR to double your clock.

2 - FlipFlops (Q and NOT Q outs for each)

2 - OR Gates

2 - AND Gates

1 - Buffer/Inverter

All the outs are Buffered.

55 mA +12V
38 mm deep
O 4.00 (2 Votes) Average Rating
Read more
MRP:$263.68 SAVE 17%
coming soon $219.73
FORTHCOMING
Equinox Synth VCF Analogue Voltage Controlled Filter Module
Cat: 802077 Rel: 28 Feb 21
 
Analogue voltage controlled filter module
Notes: The VCF is possibly one of the most important modules within a modular synthesiser. The Equinox VCF was designed with two classic instruments in mind: the SH-101 and the TB-303, both possessing key sonic elements in electronic music culture. Combined with the VCO, the Equinox VCF provides an incredibly rich palette of squelches and squeals, from throbbing basslines through to mix cutting leads. With two VCOs connected to the two mixed inputs, this module can produce the fattest of sounds.

The main role of the Low Pass Filter in subtractive synthesis is to remove higher harmonics from a waveform, altering the sound into new timbres. Filtering all harmonics from a waveform will result in just a sine wave oscillating at the fundamental frequency, great for hard punching kick drums. An alternative method for producing sine waves is to crank the Resonance control to maximum, causing the filter to go into self oscillation. The pitch of this very pure sine wave can now be controlled either via the Cutoff knob or the CV In.

Current Draw: +12V: 20mA, -12V: 20mA

Depth: 25mm

HP: 8HP
Read more
MRP:$113.77 SAVE 17%
coming soon $94.81
FORTHCOMING
Equinox Synth ADSR Analogue Attack Decay Sustain & Release Module
Cat: 802084 Rel: 28 Feb 21
 
Analogue attack decay sustain & release module
Notes: The ADSR Envelope Generator's primary role in the modular synthesiser is to take a Gate input and generate dynamic control voltages which change over time. The Gate is usually provided by a sequencer or keyboard, when a key is pressed the gate goes high, which the key is released the gate goes low. The code within the module translates this gate signal to the various stages of the control envelope: Attack, Decay, Sustain and Release. This control voltage out can then be patched into a VCA to control volume, VCF to control frequency cutoff or VCO to control other modulation parameters such as FM or PWM.

Linear vs Exponential

The human ear hears both volume and pitch exponentially, so having exponential control over these elements is crucial. It's usual to drive a VCA with an ADSR, however only one of these should be exponential.

Linear ADSR vs Linear VCA: No exponential control.
Expo ADSR vs Linear VCA: Good exponential control.
Linear ADSR vs Expo VCA: Good exponential control.
Expo ADSR vs Expo VCA: Too much exponential control.

The Equinox VCA and VCF are exponential, the VCO has both exponential and linear control.

Current Draw: +12V: 20mA, -12V: 20mA

Depth: 25mm

HP: 8HP
Read more
MRP:$93.70 SAVE 17%
coming soon $78.07
FORTHCOMING
Equinox Synth LFO Smart Digital Low Frequency Oscillation Module
Cat: 802087 Rel: 28 Feb 21
 
Digital low frequency oscillation module
Notes: The Equinox LFO provides control over the Rate, Depth and Offset, and has two waveforms: sine and square. These can be patched into all modules which have a control voltage input, giving access to a huge range of synthesis techniques such as FM and PWM. The depth control sets the amplitude of the signal, from 5VP right down to a DC level. The offset control moves the signal either up towards +5V or down towards -5V. The module is smart enough to know when the depth is maximum, there's no room for the offset to move, but when the depth is at it's minimum, i.e. DC, the offset can move that level anywhere between +5V and -5V. A sync input is also provided, resetting the waveform so it can be synced with sequencers or other modulation sources within the modular synthesiser.

Current Draw: +12V: 20mA, -12V: 20mA

Depth: 25mm

HP: 8HP
Read more
MRP:$93.70 SAVE 17%
coming soon $78.07
FORTHCOMING
Michigan Synth Works uBurst Module (black faceplate)
Michigan Synth Works uBurst Module (black faceplate) (delay/digital/effect/pitch shifter/sampling synth module)
Cat: 802158 Rel: 18 Jan 21
 
Audio processor module
Notes: 8HP Micromodule based on Opensource Clouds
Read more
MRP:$227.55
coming soon $206.34
FORTHCOMING
Michigan Synth Works uGrids Module (black faceplate)
Cat: 802164 Rel: 18 Jan 21
 
Drum pattern sequencer module
Notes: 8HP Micromodule of Opensource Grids
Read more
MRP:$207.47 SAVE 13%
coming soon $180.68
FORTHCOMING
Michigan Synth Works nRings Module (black faceplate)
Michigan Synth Works nRings Module (black faceplate) (external/filter/oscillator synth module)
Cat: 802165 Rel: 18 Jan 21
 
Micro module
Notes: 6HP Micromodule of Opensource Rings
Read more
MRP:$227.55
coming soon $206.34
FORTHCOMING
Michigan Synth Works Plancks II Module (black faceplate)
Michigan Synth Works Plancks II Module (black faceplate) (attenuator/CV modulation/quad/sequencer/VCA synth module)
Cat: 802186 Rel: 18 Jan 21
 
Mixer/keyframer module
Notes: 8HP Micromodule based on Opensource Frames.

This devices comes with Parasites 1.1 firmware
Read more
MRP:$227.55
coming soon $206.34
FORTHCOMING
Michigan Synth Works Beehive Module (black faceplate)
Cat: 802188 Rel: 18 Jan 21
 
Micro module
Notes: 8HP micro module based on Opensource Plaits.

Stock Plaits firmware
Read more
MRP:$227.55 SAVE 20%
coming soon $182.92
FORTHCOMING
Edifier 4005046 R1280DBs Bluetooth Desktop/Bookshelf Speakers (pair, brown)
Cat: 794466
 
24W paired desktop/bookshelf Bluetooth 5.0 speakers with built-in amp and multi inputs
Notes: Edifier 4005046 R1280DBs Brown Powered Bluetooth 5.0 Wireless Desktop/Bookshelf Speakers Pair 42 Watts With Built in Amp and MultiInputs

Includes Remote Control and Cables

Classic Design

Bluetooth 5.0 - Experience true freedom from wired connections with this Bluetooth speaker and enjoy the best audio. You can connect it to devices wirelessly using Bluetooth 5.0, suitable for iOS, Android, Mac, or Windows devices.

Soundfield Spacializer - Built-in Soundfield Spatializer simulates a larger soundstage with the touch of a button. This unique chipset creates wide-filed sound by optimizing each channel, sending out opposite signals to eliminate mutual interference and improve separation.

Removable Mesh Grille - The protective grill can effectively protect your speakers from dirt and other particles and can be easily removed for careful cleaning of speaker face.

Sub-out & OPT/COAX Inputs - When connected the sub-out automatically detects the subwoofer and activates the digital crossover. Optical and coaxial inputs make sure you will always enjoy music with lossless sound quality. Dual RCA inputs allow you to connect to two devices at the same time. Connect to your devices such as phone, PC, laptop, tablet or gaming console with included Fiber Optical input cable, RCA to RCA audio cable, and 3.5 mm-RCA audio cable, eliminates the need to switch cables.

Classic Wood Finish - These impressive speakers are made from MDF wood, designed to effectively prevent resonance. You will love how perfect it fits into your living room, study room, or bedroom.

Precise Control - The adjustable knobs on the side panel of the speaker allow you to adjust the bass, treble, and volume more accurately, press the volume dial to toggle input sources.

Wireless Remote - Adjust volume, mute/unmute, switch OPT/COAX mode, switch line-in, Bluetooth mode and switch sound field extension with the wireless remote, no longer need to heft yourself off of the couch every time you want to make some adjustments.

TOTAL POWER OUTPUT: R/L: 21W+21W RMS

BLUETOOTH VERSION: Qualcomm 3003 V5.0

FREQUENCY RESPONSE: 51Hz-20KHz

INPUT: Bluetooth, LINE IN 1, LINE IN 2, Optical, Coaxial,

DRIVER UNIT: F13mm tweeter unit + 4-inch mid-woofer

SIGNAL-TO-NOISE RATIO: =85dBA

INPUT SENSITIVITY: R/L:350i50mFFS , Bluetooth R/L:700i50mFFS, LINE IN1 R/L:500i50mV, LINE IN2 R/L:600i50mV, Optical /Coaxial,

Includes: RCA to RCA cable, RCA to 3.5mm cable, Speaker Connecting cable, Remote Control, User Manual
Read more
coming soon $146.11
FORTHCOMING
Michigan Synth Works MicroTemps Utile Module (black faceplate)
Michigan Synth Works MicroTemps Utile Module (black faceplate) (clock generator/digital/sequencer synth module)
Cat: 802195 Rel: 18 Jan 21
 
Clock generator module
Notes: 6 x clock generator

Hardware basics, in brief:

teensy 3.1/3.2 @ 120MHz, w/ 128x64 OLED
trigger-to-output latency < 100us.
2 clock inputs (> 100k input impedance; threshold ~ 2.5V)
4 CV inputs (100k input impedance, -/+ 5V, assignable to (almost) any parameter)
6 clock outputs (5 digital, 1 DAC (12 bit): 10V (GPIO), -/+ 6V (DAC))
two encoders w/ switches; 2 tactile buttons.
14HP, ~ 25 mm Depth

Firmware:

7 modes, selectable per channel:
trigger sequencer/sequence editor
clock division/multiplication
LFSR
random w/ threshold
euclidian
logic (AND, OR, XOR, NAND, NOR, XNOR)
burst
DAC (channel #4 only): random, binary, "Turing", logistic, sequencer/arpeggiator
Read more
MRP:$207.47 SAVE 19%
coming soon $168.42
FORTHCOMING
Michigan Synth Works Threshold Module (black faceplate)
Michigan Synth Works Threshold Module (black faceplate) (oscillator/quad/synth voice module)
Cat: 802202 Rel: 18 Jan 21
 
Audio generator module with MIDI fuctionality
Notes: 10HP Edges Clone with integrated midi interface and PSImidi which allows any TRS midi cable to be used.

MIDI Functionality:

MIDI Learn: Press this button and send a midi note. The device will use that channel as the base channel

MIDI Mode: This button cycles between two operational modes.

1. 4 single voices trigger on 4 midi channels starting on the base MIDI channel (i.e. base channel is channel 2 so the voices are mapped over channels 2, 3, 4, 5)

2. Simple Poly mode where each voice plays on a different note on the same midi channel

Note about MIDI and Gating: The gate is normalled OPEN by the Gate 1 input. This is by design but will also force the gate open when the device is triggered by midi. Placing a dummy jack will break the open normal the gate will trigger via MIDI normally

Read more
MRP:$207.47 SAVE 19%
coming soon $168.42
FORTHCOMING
Michigan Synth Works uTides Version 2 Module (black faceplate)
Michigan Synth Works uTides Version 2 Module (black faceplate) (clock generator/digital/envelope generator/frequency divider/function generator/LFO/oscillator synth module)
Cat: 802220 Rel: 18 Jan 21
 
Tidal modulator
Notes: 8HP Tides version 2

Fully calibrated.
Read more
MRP:$207.47 SAVE 19%
coming soon $168.42
Artículos del 201 al 250 de 268 en la página 5 de 6
«  1  2  3  4  5  6  »

Filter

Coming Soon: Studio Equipment
Close