100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

Inicio  Coming Soon  

Studio Equipment

Options
Artículos del 251 al 276 de 276 en la página 6 de 6
«  1  2  3  4  5  6
FORTHCOMING
Sensel Dvorak Tactile Keyboard Overlay For Morph MIDI Controller
Cat: 785472
 
Overlay
Notes: Turn the Morph into a wireless keyboard with one of our 3 keyboard overlays. Boost your mobile productivity with tactile key action, function keys, media controls, and customizable shortcuts. Use the SenselApp to adjust for Windows and Mac layouts, so your muscle memory stays intact!

Features:
Soft and quiet, with mechanical feedback - feels fantastic to type on
Wireless Bluetooth connectivity with PC, Mac, iOS (iPhones, iPads) and Android
Hotkeys for PC/Mac
Trackpad below space bar

Specs:
Weight: 0.4 lbs | 182 g
Dimensions: 9.5 x 5.5 x 0.3 in | 24 x 14 x 0.8 cm

*This overlay is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with QWERTY, Morph with AZERTY, or Morph with DVORAK.
Read more
MRP:$45.42 SAVE 17%
coming soon $37.85
FORTHCOMING
Michigan Synth Works uTides Version 2 Module (with LED Pots) (black faceplate)
Michigan Synth Works uTides Version 2 Module (with LED Pots) (black faceplate) (clock generator/digital/envelope generator/frequency divider/function generator/LFO/oscillator synth module)
Cat: 802222 Rel: 18 Jan 21
MRP:$219.09 SAVE 19%
coming soon $178.12
FORTHCOMING
Michigan Synth Works Micro Streams Module (black faceplate)
Cat: 802223 Rel: 18 Jan 21
 
Micro module
Notes: 8HP micro module based on Opensource Streams. Stock Streams firmware
Read more
MRP:$227.10 SAVE 20%
coming soon $182.56
FORTHCOMING
AniModule TikTok Module
AniModule TikTok Module (clock modulator synth module)
Cat: 793800 Rel: 31 Dec 20
 
Clock divider & multiplier module
Notes: The TikTok is a 4HP Clock Divider/Multiplier.
It has Divisions and Multiplications of:
*//2
*//3
*//4
*//5
*//6

There is a Clk Input and a Reset Input.
Both are buffered with an opamp based comparator circuit.
They are looking for approximately +1.1V on a rising edge.
This means that you are not constrained to gate (pulse) signals to trigger them.

The Reset input resets your divisions clock counter to 1

There is a switch to select Mathematical or Musical divisions.

The Multiplication Outputs 25MS Trigger pulses.
The Division Outputs are on as long as your Clock source.

Avg Current draw:
40 mA
-9 mA
Peak Current Draw:
80 mA
-17 mA

Width = 4HP
Depth = 38mm
Read more
MRP:$196.38 SAVE 17%
coming soon $163.63
FORTHCOMING
Sound Force SFC Mini V2 USB MIDI Controller
Cat: 804281 Rel: 25 Jan 21
MRP:$371.38 SAVE 19%
coming soon $300.56
FORTHCOMING
Sound Force SFC 60 V3 USB MIDI Controller
Cat: 804282 Rel: 25 Jan 21
MRP:$407.45 SAVE 19%
coming soon $328.40
FORTHCOMING
Equinox Synth VCA Analogue Voltage Controlled Amplifier Module
Cat: 802082 Rel: 28 Feb 21
 
Analogue voltage controlled amplifier module
Notes: The VCA is all about controlling the volume of the signal, both attenuation and a bit of amplification. All without distorting the signal. The Equinox VCA is based on the very high performance THAT Corp 2181 Blackmer trimmable VCA ICs, often found in top end studio hardware. We have kept component count to a minimum to ensure the audio signal path is kept as clean as possible.

The two controls on the Equinox VCA are for overall volume and the CV Depth. The CV input controls how much the signal is attenuated or amplified, this would usually be controlled by an envelope generator, such as the Equinox ADSR. This gives the artist control over how the amplitude or volume of a sound evolves over time. From hard hitting kicks to gently evolving pads, the VCA is the primary module for precise volume control within the modular synthesiser.

Current Draw: +12V: 20mA, -12V: 20mA

Depth: 25mm

HP: 4HP
Read more
MRP:$93.51 SAVE 17%
coming soon $77.92
FORTHCOMING
Edifier 4003653 SS02 Speaker Stands For S2000Pro /S1000DB/S1000MKII (pair, brown/black)
Cat: 794311
 
Paired 26.5" wood grain speaker stands for S2000Pro /S1000DB/S1000MKII
Notes: The S2000Pro/S1000db/S1000MKII stands are a great addition to any home or studio audio set up. It adds style and functionality all in one. The S2000pro/S1000db/S1000MKII stands are a breeze to set up and enhances the look and feel of any environment its in. The atmosphere changes once we set our eyes on the clean lines and wooden finish of these speaker stands.

The well-designed S2000pro/S1000db/S1000MKII speaker stands place the speaker on a solid platform, which helps achieve the best overall sound quality, especially bass. The elegant design negates the effect that vibrations may cause.

Hollowed design - ready to fill with sand to increase stability and eliminate resonance.
Read more
coming soon $161.42
FORTHCOMING
Edifier 4004964 R1280DBs Bluetooth 5.0 Wireless Desktop/Bookshelf Speakers (black)
Cat: 794321
 
42-watt paired Bluetooth 5.0 speakers
Notes: Edifier 4004964 R1280DBs Black Powered Bluetooth 5.0 WirelessDesktop/Bookshelf Speakers Pair 42 Watts With Built in Amp and MultiInputs Includes Remote Control and Cables (Black)

Multiple Inputs: Optical, Coaxial, Bluetooth, Dual RCA, Subwoofer output

Removable Mesh Grille - The protective grill can effectively protect your speakers from dirt and other particles and can be easily removed for careful cleaning of speaker face.

Sub-out & OPT/COAX Inputs - When connected the sub-out automatically detects the subwoofer and activates the digital crossover. Optical and coaxial inputs make sure you will always enjoy music with lossless sound quality. Dual RCA inputs allow you to connect to two devices at the same time. Connect to your devices such as phone, PC, laptop, tablet or gaming console with included Fiber Optical input cable, RCA to RCA audio cable, and 3.5 mm-RCA audio cable, eliminates the need to switch cables.

Classic Wood Finish - These impressive speakers are made from MDF wood, designed to effectively prevent resonance. You will love how perfect it fits into your living room, study room, or bedroom.

Precise Control - The adjustable knobs on the side panel of the speaker allow you to adjust the bass, treble, and volume more accurately, press the volume dial to toggle input sources.

Wireless Remote - Adjust volume, mute/unmute, switch OPT/COAX mode, switch line-in, Bluetooth mode and switch sound field extension with the wireless remote, no longer need to heft yourself off of the couch every time you want to make some adjustments.

TOTAL POWER OUTPUT: R/L: 21W+21W RMS

BLUETOOTH VERSION: Qualcomm 3003 V5.0

FREQUENCY RESPONSE: 51Hz-20KHz

INPUT: LINE IN 1, LINE IN 2, Optical, Coaxial, Bluetooth

DRIVER UNIT: F13mm tweeter unit + 4-inch mid-woofer

SIGNAL-TO-NOISE RATIO: =85dBA

INPUT SENSITIVITY: LINE IN1 R/L:500i50mV, LINE IN2 R/L:600i50mV, Optical /Coaxial R/L:350i50mFFS,Bluetooth R/L:700i50mFFS

Includes RCA to RCA cable, RCA to 3.5mm cable, Fiber Optic input cable, Speaker Connnecting cable, Remote Control
Read more
coming soon $145.83
FORTHCOMING
Sensel Gaming Overlay For Morph MIDI Controller
Cat: 785468
 
Overlay
Notes: Remember all the times when you'd press harder on the game controller buttons hoping it would make you go faster? We do. In fact, those moments were at the top of our minds when we were creating the Gaming Overlay. Now, you can use pressure, gestures, and the simple layout of the device to beat your opponent and add that extra missing dynamic to your gaming.
*This overlay is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with Gaming Overlay.

Compatibility
The Gaming Overlay acts as a USB game controller, so it is compatible with anything a standard gamepad is. While most devices support this standard, not every game does, so you may need to use emulation software for some games. You can find more details in the Morph user guide.
Read more
MRP:$45.42 SAVE 17%
coming soon $37.85
FORTHCOMING
Sensel Qwerty Tactile Keyboard Overlay For Morph MIDI Controller
Cat: 785469
 
Overlay
Notes: Turn the Morph into a wireless keyboard with one of our 3 keyboard overlays. Boost your mobile productivity with tactile key action, function keys, media controls, and customizable shortcuts. Use the SenselApp to adjust for Windows and Mac layouts, so your muscle memory stays intact!

Specs:
Weight: 0.4 lbs | 182 g
Dimensions: 9.5 x 5.5 x 0.3 in | 24 x 14 x 0.8 cm
Read more
MRP:$45.42 SAVE 17%
coming soon $37.85
FORTHCOMING
Sensel Travel Case For Morph MIDI controller (pink)
Cat: 785476
 
Travel case
Notes: Stay organized and mobile while protecting your gear.

The Morph travel case is a convenient way to carry and protect your Morph, overlays, cables, iPad, paintbrushes and any other accessories that you use along with your Morph. Fits a Morph, iPad and 5+ overlays with ease.

Contains:
A padded exterior to protect your Morph from bumps and bruises
An interior sleeve to securely hold your Morph (and iPad)
Interior straps to hold cables, paintbrushes, drumsticks
An external zippered pocket for additional storage.

Specs:
Weight: 0.7 lbs | 319 g
Dimensions: 11 x 8 x 1.4 in | 28 x 20 x 3.4 cm
Read more
MRP:$32.06 SAVE 17%
coming soon $26.70
FORTHCOMING
Edifier 4004971 R1700BTs Bluetooth 5.0 Wireless Bookshelf Speakers (pair, brown)
Cat: 794344
 
Paired 66-watt bookshelf Bluetooth 5.0 speakers
Notes: Edifier 4004971 R1700BTs Powered Bluetooth 5.0 Wireless Bookshelf Speakers Pair 66 Watts With Built in Amp and Multi Inputs Includes Remote Control and Cables (Brown)

Rich and Detailed Sound

Soundfield Spacializer - Soundfield Spatializer simulates a larger soundstage with the touch of a button. This unique feature creates wide-filed sound by optimizing each channel, sending out opposite signals to eliminate mutual interference and improve separation.

Impressive Wood Finish - MDF wood with walnut wood finish-vinyl makes it a perfect addition to your living room, office, or study.

Bluetooth 5.0 with Qualcomm aptX - No wires required! Connect to devices using Bluetooth 5.0 technology. Enjoy listening from your phone, laptop, or tablet with wireless connection, works with iOS, Android, Mac, or Windows devices.

Eagle Eye Tweeter - 30W + 36W RMS undistorted power, 4 inch woofer, and 19mm silk dome tweeter, the Edifier R1700BTs active Bluetooth bookshelf speakers make even the hardly-noticeable sounds very clear. And the DSP(Digital Signal Processing) and DRC (Dynamic Range Control) helps to minimize distortion for improved audio even at low volume.

Multiple ways to connect - When connected the sub-out automatically detects the subwoofer and activates the digital crossover. Dual RCA inputs allow you to connect to two devices at a time. Connect to your devices such as phone, PC, laptop, tablet, or gaming console with RCA to RCA audio cable, and 3.5 mm-RCA audio cable, eliminates the need to switch cables.

Built-in Controls - Convenient dials on the side panel of the speaker allows you to adjust the bass, treble, and volume, press the volume dial to toggle between inputs.

Wireless Remote - Adjust volume, mute/unmute, switch inputs, Bluetooth, select sound field extension, and line-in mode with the wireless remote, no need to leave the couch.

Removable Grill - Protects your speaker drivers, easy to remove for cleaning.

TOTAL POWER OUTPUT: R/L(high): 15W+15W, R/L(mid-low): 18W+18W

BLUETOOTH VERSION: Qualcomm 3031/V5.0

INPUT SENSITIVITY: LINE IN 1: 700i50mV, LINE IN 2: 550i50mV, Bluetooth: 400i50mV

INPUT: LINE IN 1, LINE IN 2, Bluetooth

DRIVER UNIT: F19mm tweeter unit + 4 inches woofer

SIGNAL-TO-NOISE RATIO: =85dBA

FREQUENCY RESPONSE: 52Hz-20KHz

Includes: RCA to RCA cable, RCA to 3.5mm cable, Speaker Connecting cable, Remote Control, User Manual
Read more
coming soon $164.76
FORTHCOMING
AniModule DD Dual VCA Module
AniModule DD Dual VCA Module (CV modulation / panning / VCA / dual stereo synth module)
Cat: 794391 Rel: 31 Dec 20
 
Dual VCA module
Notes: A Dual VCA for Audio or CV.

Mod In 1 is Buffered, Inverted then Normalled to Mod In 2, to facilitate stereo panning and VC CrossFading without a bunch of support modules.

Don't want it? Just turn the attenuator down or plug a signal of your choosing in to the Mod In 2.

Current Draw: +12V = 25mA, -12V = -22mA

8HP, 28mm Deep
Read more
MRP:$205.73 SAVE 17%
coming soon $171.44
FORTHCOMING
Edifier 4004988 S1000DBMKII Bluetooth 5.0 Wireless Active Bookshelf Speakers (pair, brown)
Cat: 794392
 
Paired 120W Bluetooth 5.0 powered bookshelf speakers with built-in amp and multi inputs
Notes: Turn on the Speaker, Juice up the World - S1000MKII Audiophile Active Bookshelf 2.0 Speaker.

Includes Remote Control and Cables

120 Watts Stunning Sound Performance - A new Class D Amp boosts the system's already impressive power to a new height, crank the volume while still maintaining crystal clear audio.

Bluetooth 5.0 with aptX HD Decoding - Stream high-quality audio wirelessly with reduced latency and increased stability.

Titanium Dome Tweeter - A titanium dome is a high-quality unit that can only use in hi-fi level high-end speakers. Restore high-frequency signals up to 40KHz to obtain a clearer, brighter, transparent, and pure tone.

Simpler but Much More Stylish - Aluminum bass speaker for surge and wave bass, pure sound with advanced titanium dome tweeter. Designed with classic wooden side panels, the S1000 MKII is angled to ensure front-facing drivers positioned for optimum performance without compromise.

Metal Diaphragm, Medium Bass Unit - The 5.5-inch aluminum alloy mid-woofer unit has the characteristics of high strength and low distortion. By the precise analysis of the KLIPPEL system in Germany and the advantages of DSP full digital electronic frequency divider, the performance of the unit is more accurate, faster, cleaner, and more powerful.

DSP Digital Audio Processing - Built-in Texas instruments DSP professional audio processing chip TLV320AIC3254, and use its miniDSP to complete electronic frequency division and dynamic management for accurate control of frequency division point, so that the speaker can better display the sound details.

Multiple Inputs Connection - With its optical, coaxial, and auxiliary inputs, it can connect to multiple devices such as TV sets, TV boxes, Blu-ray player, game console, CD player, DVD, mobile phone, computer, tablet, or other devices.

Wireless Remote Control - Swap inputs, playback, or adjust the volume with the included remote while still able to sit on the sofa, help you to take full control of your sound wirelessly.

TOTAL POWER OUTPUT: RMS 25W×2(Treble) +35W×2(Mid-range bass)

FREQUENCY RESPONSE: 45Hz~40KHz

MIDRANGE / BASS UNIT: 5.5 inch

SIGNAL-TO-NOISE RATIO: = 90dBA

INPUT SENSITIVITY: Line in 1:750i50mV / Line in 2 :900i50mV OPT, COX: 350 mFFs i 50 mFFs Bluetooth: 450i50mV

Treble Unit: 1 Inch

Includes: RCA to RCA cable, RCA to 3.5mm cable, Speaker Connecting cable, Remote Control, User Manual
Read more
coming soon $361.80
FORTHCOMING
AniModule Lil' Monster VCO Module
AniModule Lil' Monster VCO Module (oscillator synth module)
Cat: 794393 Rel: 31 Dec 20
 
VCO module
Notes: At 8HP and 28mm deep this is A Frightening little Oscillator with Monstrous PWM, Sick, Sick Sync, and Terrifying FM capabilities!!

Great 1V/Oct tracking

Range from below to above the audible

All Waveforms respond to your Sync Input signal

Current Draw: +12V = 21mA, -12V = -21mA 8HP, 29mm Deep
Read more
MRP:$249.81 SAVE 17%
coming soon $208.17
FORTHCOMING
AniModule MixMan Module
AniModule MixMan Module (attenuater / mixer/ multiple / polariser / utility synth module)
Cat: 794394 Rel: 31 Dec 20
 
Mixer multiple & CV manipulator module
Notes: This quintessential module, while seeming fairly utilitarian, is practically Indispensable.

At only 8HP wide and 30mm deep
You can Mix, Mult, Invert and Offset your Audio and CV.

For starters there is a 3 Channel Mixer with x3 Buffered Outs.
Then there is a dedicated Analog Inverter.
Last but not least there is an Offset Manipulator.

The Offset Manipulator is designed to take a signal and combine it with an offset.
It will work fine without a signal coming in to it though. Just take the signal from the Offset Manipulator out and dial in your desired voltage.

The Offset Manipulator Out is Normalled to the 3rd Mix In Jack Switch. If you don't want your Mixer Signals Offset, Connect a plug to the 3rd Mix In Jack First, or just dial down the 3rd attenuator to 0.

The Mixer Out is Normalled to the Inverter In Jack Switch. That way you can have an inverted version of your MixOut at the Inverter Out without using an extra patch cable
Read more
MRP:$132.25 SAVE 17%
coming soon $110.20
FORTHCOMING
AniModule LogicOgic Module
AniModule LogicOgic Module (clock modulater / frequency divider / logic synth module)
Cat: 794401 Rel: 31 Dec 20
 
Logic module
Notes: This is a handy module. It's nice to have a few ORs and ANDs around when you're fiddling around with your clocks and percussives.

The Output from FlipFlop1 Q is normalled to the FlipFlop2 Input via the jack switch.

The NOT Q outs from the FlipFlops are fun to stagger your clock pulses or use as a Sub-Oscillator. The Inverter/Buffer can be sent to a Gate-Trigger converter and back to the OR to double your clock.

2 - FlipFlops (Q and NOT Q outs for each)

2 - OR Gates

2 - AND Gates

1 - Buffer/Inverter

All the outs are Buffered.

55 mA +12V
38 mm deep
O 4.00 (2 Votes) Average Rating
Read more
MRP:$263.17 SAVE 17%
coming soon $219.30
FORTHCOMING
Michigan Synth Works mBrane Module (black faceplate)
Cat: 802190 Rel: 18 Jan 21
 
4-channel MIDI to CV interface module
Notes: mBrane is a 4 channel midi to CV interface based on opensource Yarns. The device includes a 1.5m 3.5mm TRS to Midi male cable (Type B). This is the brand new Rev1.1 of the device which now features PSImidi which allows ANY type of TRS midi cable to be used on the input. Type A or B, male or female, all will work.

Running firmware 1.5
Multichannel MIDI to CV/Gate conversion

Yarns is a MIDI interface providing up to 4 channels of very accurate CV/Gate conversion, which can be assigned to up to 4 voices.

In single voice mode, note, velocity, modulation and aftertouch (or other CC) CV are produced, along with a gate, a trigger, and a clock/reset output.

In two voices mode, two channels of note, modulation or aftertouch CV are produced, along with two gates, and clock/reset outputs.

Finally, in four voices mode, four pairs of CV/Gate outputs are provided.

Each voice has a built-in digital LFO to interpret modulation wheel messages as a vibrato; can respond to pitch-bend messages; or can be smoothed with a glide/portamento control - no need for a dedicated module and patches to get the right response from a MIDI keyboard!

Monophonic and polyphonic

The 2 and 4-voice modes are available both in a "polyphonic" and "multitimbral" flavour. The former receives chords from one single MIDI channel and dispatches them to the voices; while the later provides independent monophonic parts - which can be addressed to different MIDI channels, keyboard ranges, or even velocity levels.

Various note priority modes (low, high, last) and polyphonic allocation schemes (voice-stealing, random, cyclic) allows you to fine-tune the CV/Gate conversion to your playing style.

With sequencing and note transformation...

Each part can generate sequences either through an arpeggiator/euclidean sequencer combo; or with a SH-101 style sequencer with step-by-step recording, storing up to 64 notes. The module can sync to an external MIDI clock, and generate a clock/reset output at any subdivisions of the MIDI clock.

...and even more advanced features.

Other unique features include support for microtunings (either through standard MIDI messages or from a selection of historical tunings or indian ragas), just intonation, and an audio output mode which can transform one, two, or four of the CV outputs into simple digital oscillators.
Read more
MRP:$227.10 SAVE 20%
coming soon $182.56
FORTHCOMING
Michigan Synth Works Micro Ornament Crime Module (black faceplate)
Michigan Synth Works Micro Ornament Crime Module (black faceplate) (LFO/quantizer/random/sequencer/utility synth module)
Cat: 802199 Rel: 18 Jan 21
 
ASR/LFO/CV generator module
Notes: The Ornament & Crime firmware is a collaborative open-source project by Patrick Dowling (aka pld), Max Stadler (aka mxmxmx) and Tim Churches (aka bennelong.bicyclist). It (considerably) extends the original firmware for the Ornament & Crime (o_C) DIY eurorack module, designed by mxmxmx.

The original o_C module was designed to perform a single function: a digital, quantising version of the classic analogue shift register (ASR).

There is still a quantising ASR (analogue shift register) function in the current Ornament & Crime firmware, now named CopierMaschine, but several other "apps" have been added, incl. quantisers, sequencers, LFOs, random/chaotic CV generators, and so on. These apps are selectable on-the-fly, without having to reboot the module or toggle the power.

The o_C module, and the firmware for it, break new ground as a polymorphic module: a generic set of inputs and outputs are provided, and the textual OLED display is used to permit re-mapping of these inputs and outputs for each app, and in some cases, for each of the four channels within each app. The o_C module does not purport to be the paradigmatic pinnacle of polypurpose i in fact, as noted above, it was originally designed to fulfil just one purpose (ASR) - but together with the much-expanded firmware for it, we hope it provides an interesting and useful early step in the evolution of such multi-purpose modules.
Read more
MRP:$267.18 SAVE 19%
coming soon $217.07
FORTHCOMING
Livestock Electronics Leap ADSR & LFO Module
Livestock Electronics Leap ADSR & LFO Module (CV modulation/drum/dual & stereo/envelope generator/LFO/random synth module)
Cat: 802753 Rel: 18 Jan 21
 
ADSR/LFO module
Notes: Ever need to apply DC offset or attenuation to your modulation sources?

Want to create complex modulations using an ADSR and LFO? Need a heat packing modulation source in a small package? Jump right in and feel the Leap!

Leap is an ADSR and LFO with built in DC offset and Attenuversion. The envelope and lfo are to be used individually, however the lfo's frequency and amplitude can be modulated internally by the adsr to create a complex modulation source or a simple drum.

The envelope stages can be modulated, with attenuversion for the cv inputs.

And the lfo responds to V/oct (+-5V) or can be synced to a clock.

Width: 10HP

Depth Back 25MM

Depth Front 25MM

Weight 133g

Power @ +12V 110mA

Power @ -12V 30mA
Read more
MRP:$233.78 SAVE 20%
coming soon $187.01
FORTHCOMING
Michigan Synth Works Monsoon Module (black faceplate)
Michigan Synth Works Monsoon Module (black faceplate) (dlay/digital/dual & stereo/reverb synth module)
Cat: 802204 Rel: 18 Jan 21
 
Audio processor module
Notes: 12HP Clouds Clone with individual controls for each Parameter. Parasites firmware standard but others available on request.
Read more
MRP:$227.10 SAVE 20%
coming soon $182.56
FORTHCOMING
Livestock Electronics Bang Wavetable Oscillator Module
Livestock Electronics Bang Wavetable Oscillator Module (digital/noise/oscillator/waveshaper synth module)
Cat: 802749 Rel: 18 Jan 21
 
Wavetable oscillator module
Notes: Want to create your own wavetables? Generate tons of interesting lo-fi waves that excel in percussive sounds? Or just want an oscillator that can produce rich harmonic textures? This may be a Bang for your buck!

Bang is a lo-fi digital wavetable oscillator inspired by old game consoles. However it takes a totally new approach to wavetable synthesis: within a cycle it switches between socalled chunks that are indexed as odd or even numbers. Waves can be assigned to these odd or even chunks, which allows for complex waveforms. The result is aliased, rich and absolute fun!

The module comes with six libraries containing 12 waves each. And user wave libraries can even be created using the supporting application for Mac and Windows.

Width: 10HP

Depth (Back): 30MM

Depth (Front): 25MM

Weight: 133g

Max @ +12V: 75mA

Max @ -12V: 30mA
Read more
MRP:$327.30 SAVE 20%
coming soon $262.72
FORTHCOMING
Livestock Electronics Maze Matrix Mixer Module
Livestock Electronics Maze Matrix Mixer Module (mixer/multiple/quad/switch/attenuator/polariser/sequencer/controller synth module)
Cat: 802755 Rel: 18 Jan 21
 
Preset morphing & router matrix module
Notes: Want to change your patch with a push of a button? Create presets for attenuversion, routing and mixes of signals? Sequence and morph through audio and cv? Then Maze has got you sorted!

Maze is a versatile routing and mixing matrix. That allows you to create your own touchpad of patch presets. Each routing position has been equipped with an attenuverting VCA so it can be used for signal distribution and attenuversion.

Morphing speed between presets can be changed and routings can be muted. Preset selection is alsopossible with CV and several algorithms.

The signal path is entirely analog and it is even possible to chain Maze modules together to increase your matrix.

Width: 12HP

Depth (Back): 43MM

Depth (Front): 25MM

Weight: 165g

Max @ +12V: 200mA

Max @ -12V: 70mA
Read more
MRP:$467.57 SAVE 20%
coming soon $375.16
FORTHCOMING
Modulaire Maritime Victor Alpha 4 Channel Stereo Mixer Module
Cat: 803414 Rel: 18 Jan 21
 
External/mixer/panning/dual & stereo synth module
Notes: Victor Alpha is a 4 channel Stereo Panning Mixer / Output module with VU Meter

Details & use:

This mixer takes 4 mono signals, transform them to stereo and allows panoramic control over every mix channel as well as their level.
The potentiometers of panning control are with "center detent" which allows you to always know precisely where is the exact center.

The mix signal is scaled thru op-amps buffers to what will correspond to a line level so the mixer is supposed to be placed at the end of the chain to serve as an Output of your modular.
It has separate Left an Right outputs to be used together for stereo output.

The mixer uses high-performance IC borrowed from Hi-Fi world for the output buffer, with high-speed precision audio- to deliver very low noise, clean sound.

The output signal is indicated by the led VU meter which uses two Matsushita ICs calibrated for that purpose.
The leds are selected for lowest power consumption. (The vu meter can be turned off if desired by taking off two jumpers on the back of the module)

This module, along with other Modulaire Maritime modules, is designed to contribute in making the modular synth more autonomous in the sens to alow extended controls "in the rack" and get a rid of the computer, interfaces, etc. Therefore this mixer is suitable also for nomad use as you can stick your speakers, boombox.. directly to your modular setup (without a risk to explode them with a "hot" modular signal :) or to record directly- in stereo with panning control, from your modular.

Made for more fun with a modular!

8hp
25 mm deep
Reverse voltage protected
Read more
MRP:$175.00 SAVE 34%
coming soon $115.77
FORTHCOMING
Modulaire Maritime Sindikat CV Processor/Mult/Signal Mixer Module
Cat: 803418 Rel: 18 Jan 21
 
Attenuator/mixer/multiple/polariser/switch/utility synth module
Notes: Sindikat is made to be placed in the heart of every modular setup: copy, invert, attenuate, scale, get different polarity versions simultaneously of two pair of mixes, mix CV as well as audio (up to 8 sources in total), mute or switch to add desired source to a bigger unity mix, scale two separate mixes with chosen gain.. All circuits can preserve their independent use and/or be combined!

Details & use:

The module consists of circuits designed to group the most useful operations for signal mingling in modular synth setups -but in the more fun manner!

It is designed in the way that the circuits can function independently -be patched to the other modules- or to be combined inside the module at the same time!

On the top of the module there is a buffered multiple (the bi-color led is indicating signal input and its polarity) : Next to the input there are two outputs giving the exact copy of the incoming signal. On the third output you'll get the 'attenuverted" version of that signal which is controllable by the dedicated attenuator/inverter potentiometer.

This signal can be further added (or muted) via its switch, internally to a unity gain mixer situated on the bottom of the module via its SUMM OUT.

This mixer has its own 3 inputs who will accept CVs as well as audio signals with an output gain of 1/3.

Its bi-color led will indicate the polarity of the incoming signals.

In the center of the module there is a CV Processor consisting of two mixers each mixing two signals- in the way that:
The first one takes two signals (A and B) and outputs simultaneously the positive version of their mix (AB+ OUT) and the negative version (AB- OUT).
Their gain is scaled by the potentiometer: going on 1x in the middle position to 2x fully turned. (After middle position with a stronger signal and due to higher gain it will start to saturate producing an distortion-like effect)
Further, via their switch, those mixes also can be added to a unity gain mix (SUMM OUT) and therefore creating a larger mix.
You'll do that by choosing which polarity output you want to send to a summing mix.
In the middle position of the switch the signal is "off" so you can use this to mute/un-mute the signal in the unity mix. Also, even if it is in "off" position this only breaks the internal link to a unity mix but you can still use their distinctive outputs to send your positive and negative mixes elsewhere in your system.

Goes the same for the second one: C and D inputs giving positive (CD+) output result and negative (CD-) simultaneously , all with gain select and the switch choice for summ positive or negative (or none) to a bigger unity mix.

You can also choose to use those two circuits as a simple attenuators for ex. by patching only one signal so you'll get an attenuator and polarizer at once!

The module can process CV and audio as well in every circuit.

Therefore, by summing eventually all the signals to a final "SUMM OUT" output you can create up to 8 sources -in the module- large mix!

Made for more fun with a modular!

This module fits perfectly well with Modulaire Maritime "Decca" switch-based manual control module.

As these modules are developed from practicing recording in "one take" (same for a live performing), combining them you get an extended control over CVs, gates and audio going on in the system, allowing to switch- stop/mute, change polarity, introduce/mix more gates, drums,.. on the fly.

8hp
25mm deep
Reverse voltage protected
Read more
MRP:$162.98 SAVE 36%
coming soon $104.64
Artículos del 251 al 276 de 276 en la página 6 de 6
«  1  2  3  4  5  6

Filter

Coming Soon: Studio Equipment
Close