100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

Inicio  Coming Soon  

Studio Equipment

Options
Artículos del 1 al 50 de 604 en la página 1 de 13
1  2  3  ...  13  »
FORTHCOMING
Intellijel LPG 1U Passive Low Pass Gate Module
Cat: 782952 Rel: 30 Sep 20
 
Low pass gate module
Notes: Drop this module (or a few of them) into your 1U row, patch in some sound sources, and then ping them with gates and CV to get some instantly pleasing results. So simple and fun!

Natural dynamics with the magic of vactrols.

In general, low pass gates (LPGs) control the amplitude and timbre of a signal by opening and closing a low pass filter. When the gate is closed, no frequencies are allowed to pass through (and no output is heard). As the gate begins to open, the lowest frequencies pass through to the output. As the gate opens further, the output grows louder and its high frequency content increases.

Traditional Low Pass Gates use vactrols to control the opening and closing of the filter. Encased within a vactrol is both a light source and a light detector. Applying a control voltage to the vactrol lights its internal LED i the brightness of which is measured by its detector. What makes vactrols particularly unique (and well-suited to musical applications) is their non-linear response to voltage - in particular, the way in which the internal LED slowly dims (rather than shutting off instantly) when the control voltage is removed. This sonic coupling of timbre and volume, along with the circuit's natural decay, makes the low pass gate particularly adept at producing tones associated with struck objects, like hand drums or marimbas. Indeed, low pass gates are the main ingredient of the so-called Buchla Bongo sound.

The Intellijel Passive Low Pass Gate 1U is a simple, vactrol based, 1-pole, passive low pass gate, which is controlled by an external CV input. Without positive control voltage, the gate is completely closed and none of the LPG's input signal is passed through to the output. Increasing amounts of positive CV open the gate i making the output signal both louder and brighter. At +5V, the gate is fully open and the input signal is passed through to the output.
This makes LPGs sound very different (and more acoustic) than the traditional complement of envelopes, VCFs and VCAs that are employed in most subtractive synthesizers. Exciting the vactrol (via the CV input) with a trigger, noise blast, or short envelope will result in a very natural sounding filtered envelope that's reminiscent of the sonic characterics of struck objects, which are allowed to decay naturally.

In addition, because this is a passive circuit (no power is applied to it), its sonic characteristics are somewhat dependent upon the audio signal you feed into it, making it a very natural and organic way to shape a signal's volume and tone.

Pairs very well with the intellijel Shifty module to derive polyphony out of a only a few HP of modules.

Width: 6HP
Depth: 19mm
Read more
MRP:$49.66 SAVE 17%
coming soon $41.37
FORTHCOMING
Intellijel XY I/O 1U Module
Cat: 785358 Rel: 21 Oct 20
 
Conncector for Intellijel products
Notes: Use this module to tap into the 3-pin LINK connector used in several Intellijel products, including Mixup, Pedal I/O and the Palette and 2nd Generation Audio Jacks Board in a 7U case.

The XY I/O uses two 3.5mm TRS jacks, which accept insert cables to provide send/return capability to a pair of Pedal I/O's, or additional stereo inputs (or outputs) to a pair of Mixups, or one of each.

A third 3-pin Link connector on the back panel allows the X and Y jacks to access the L/R (or Send/Return) jacks on a single connected module or case without needing a stereo cable.
Read more
MRP:$27.44 SAVE 17%
coming soon $22.86
FORTHCOMING
Intellijel µMIDI 1U Module
Cat: 785361 Rel: 21 Oct 20
 
MIDI voice and clock interface
Notes: All the essentials to control and sync your rack to your computer, iPhone/iPad, or hardware MIDI device. No menu diving or configuration scripts, just two buttons. Get crazy with external modulation and sequencers, or just sync your rack's clock from your MIDI bus.

The uMIDI 1U provides all the essentials to control and sync your Eurorack modular from your computer, iPhone/iPad, or hardware MIDI device with a minimum of fuss. No menu diving or configuration scripts, just two buttons. The connectivity, features, and compact size allows the integration of your modular system with the rest of your studio while not taking up too much space in your case.

The clock section to the left features a dedicated 16th note clock output ideal for synchronizing a Eurorack sequencer like the Metropolis. A second clock output with selectable divisions can be used when difference sync events are needed. The run and reset outputs can reset your Eurorack sequencers in tandem with any external sequencer or DAW.

The right half of the uMIDI 1U gives you everything you need (like pitch, gate, trigger, velocity, mod wheel and assignable CC) to control a single voice synth via MIDI.

This module connects via ribbon cable to the uMidi JACKS 1U module or to the MIDI I/O jacks on the back of the 7U performance cases.
Read more
MRP:$243.06 SAVE 17%
coming soon $202.54
FORTHCOMING
Intellijel MIDI Expander 1U Module
Cat: 785362 Rel: 21 Oct 20
coming soon TBA
FORTHCOMING
Intellijel Bifold 3U Module
Cat: 785428 Rel: 22 Oct 20
MRP:$279.66 SAVE 17%
coming soon $233.04
FORTHCOMING
Behringer 121 Dual VCF Module
Cat: 772865
 
dual VCF module
Notes: This is the Behringer SYSTEM 100 121 DUAL VCF Module. An authentic reproduction of the original System 100M circuitry from the 80s that can fit in a standard Eurorack case, at a very affordable price. Mix the 121 DUAL VCF in with your existing rig or start your modular synth journey from here.

The 121 DUAL VCF features 3 CV inputs and 3-channel mixers per VCF; allowing you to independently mix all input signals. All of these inputs have their own attenuators to provide you more control over each signal that goes into the module.

Each VCF has its own output accompanied by a resonance slider that boosts resonance frequencies and a cutoff control to adjust the cutoff frequency of the lowpass filter. The 121 DUAL VCF also features a 3-mode Fixed HPF switch where you can select between Off, 1 (1 kHz), 2 (2 kHz) or 3 (5 kHz). Combine this with the resonance and cutoff sliders to create intricate and interesting patches.

Installing the 121 DUAL VCF is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 121 DUAL VCF to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $108.90
FORTHCOMING
Behringer 903A Random Signal Generator
Cat: 772802
 
signal generator
Notes: Enter the Behringer 903A RANDOM SIGNAL GENERATOR Module, a vintage-sounding noise generator from the '70s. An authentic reproduction of the circuitry from the "Modular 55" series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

Enter the Behringer 903A RANDOM SIGNAL GENERATOR Module, a vintage-sounding noise generator from the '70s. An authentic reproduction of the circuitry from the Modular 55 series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 903A RANDOM SIGNAL GENERATOR generates both white and pink noise via two 3.5 mm outputs each allowing you to send different signals to other modules in your rig.

Installing the 903A RANDOM SIGNAL GENERATOR is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 903A RANDOM SIGNAL GENERATOR to be mixed with other synth modules for a truly unique set up.

Read more
coming soon $56.62
FORTHCOMING
Behringer 904B VC High Pass Filter Module
Cat: 772804
 
filter module
Notes: Enter the Behringer 904B VOTLAGE CONTROLLED HIGH PASS FILTER Module. A vintage-sounding authentic reproduction of the circuitry from the Modular 55 & 35 Series used by the world's most famous pop, rock and jazz musicians for their shows. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 904B VOLTAGE CONTROLLED HIGH PASS FILTER allows you to attenuate low frequencies and accentuate higher ones in a signal. With the Fixed Control Voltage knob, also known as a cutoff frequency, determines the frequencies attenuated below a certain point. Switch the Frequency Range between Low (4 Hz to 20 kHz) or High (10Hz to 50 kHz) to select what frequencies the Fixed Control Voltage affects. You can use the 904B to let you cut through a mix for some searing lead tones or pair it with the Behringer 904A VOLTAGE CONTRLLED LOW PASS FILTER and be prepared to hear some very interesting sounds.

Audio in and out connectors are available on the 904B that let you process an incoming signal before sending it to another module via a 3.5 mm TS cable. You can also use the Control Inputs to connect voltage signals from other modules to affect the cutoff frequency. Use this module to add distinct tweaks to your patches so you can create more unique sounds.

Installing the 904B VOLTAGE CONTROLLED HIGH PASS FILTER is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 904B VOLTAGE CONTROLLED HIGH PASS FILTER to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $108.90
FORTHCOMING
Behringer 923 Filters Module
Behringer 923 Filters Module (eurorack module)
Cat: 772935
 
filters module
Notes: Enter the Behringer 923 FILTERS. An authentic reproduction of the circuitry from the Modular 35 and 15 series filters used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 923 features separate Low and High Pass filters each with their own dedicated frequency cutoff controls. The Low Pass filter control will roll off all frequencies above the set threshold frequency from 10Hz to 10KHz while the High Pass filter control will roll off frequencies below the set frequency. Each filter comes with their own 3.5 mm ins and outs giving you the ability to route incoming signals through the IN jack, through the filter and back out the OUT jack.

For you to shape an endless number of tones, the 923 comes with a white and pink noise generator. Use the parallel jacks for each of the noise sources to send out a white or pink noise signal and start sweeping frequencies to build tension and excitement in your songs, or use them to create some percussive sounds for a real groovy drum beat.

Installing the 923 is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 923 to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $87.12
FORTHCOMING
Behringer 961 Interface Module
Cat: 772932
 
interface module
Notes: Enter the Behringer 961 INTERFACE Module. An authentic reproduction of the circuitry from the Modular 55 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 961 features an audio to V-Trig Converter, allowing you to plug in any audio source and transform it into a voltage trigger to drive other modules in your rig. Dual S-Trig to V-Trig and a multichannel V-Trig to S-Trig converters on the 961 can be utilized to switch or control a particular function on other modules.

Controls on the 961 include a Sensitivity knob that adjusts the gain of the audio signal coming into the module via the Audio In jack. Column B in each V-Trig In bank has a Switch-On Time knob you can use to manually control how short or long the "ON" duration is for S-Trig signals. This feature is normally used to drive the 911 envelope generator. Add a 960 sequential controller to release the full creative potential of this interface module.

Installing the 961 INTERFACE is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 961 INTERFACE to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $87.12
FORTHCOMING
Behringer Eurorack Go Case
Cat: 772854
 
eurorack case
Notes: The EURORACK GO was engineered specifically to protect your favorite synthesizer modules and similar 3U electronics. With 2 rows of 140 HP useable mounting space (for a total of 280 HP), the rugged aluminum chassis features 96 sliding nuts for ultra-easy positioning of your precious gear. In the studio or on the road, the EURORACK GO is the ideal way to protect your rig - wherever the gig takes you.

One of the features that separates EURORACK GO from competing products is the massive, ultra-low noise power supply. The auto-ranging universal switch-mode supply works anywhere in the world and uses 32 keyed power connectors to protect your valuable modules from accidental reverse power hookup.

Designed for rugged reliability, the all-aluminum chassis houses an adjustable support plus oversized rubber feet to provide 0-50- setup capability and ensures rock-solid stability for use on a wide range of surfaces.

Read more
coming soon $276.60
FORTHCOMING
Behringer Podcastudio 2 USB Bundle with USB Audio Interface
Cat: 772939
 
podcasting bundle
Notes: The PODCASTUDIO 2 USB bundle has everything you need to make high-quality podcasts, produce your own music and home recordings - plus it works seamlessly with your PC or Mac* computer! All the software you'll need is provided- a XENYX 302USB mixer with built in USB/audio interface, XM8500 microphone, HPM1000 headphones and much more - you'll be up and running in mere moments, right out-of-the-box!

No matter what your audio mixing needs, the XENYX 302USB provides the performance and features that can take your talent to the next level. With its professional sound quality, 5 Inputs with the legendary XENYX mic preamp, built-in USB/audio interface, plus rugged reliability - the XENYX 302USB is ideal for both your live gigs and recording sessions.

The XM8500 dynamic microphone is a performing/home recording enthusiast's dream come true! This professional-quality microphone is designed to capture your sound with outstanding sensitivity and accuracy. With its cardioid pickup pattern for excellent sound source separation and feedback rejection, this ultra-wide frequency response mic is an excellent choice for any performing or recording scenario - and it's rugged enough to go the distance! With its integrated shock mount system, mic stand adapter, spherical wind and pop filter, all in an impact-resistant carrying case - the XM8500 just may be the only microphone you'll ever need.

HPM1000 headphones provide everything you need for comfortable listening. The oval-shaped ear cups contain high-resolution capsules that deliver every nuance of your sound. Featuring a single-sided cord that resists tangling; an ultra-comfortable headband; and a 1/4" adapter for the 1/8" connector, HPM1000 phones are compatible with everything from your smartphone - to your mixing console.

Because you'll want to take full advantage of your XENYX 302USB's recording and podcasting potential, all the software you'll need for audio recording, editing and even podcasting is included - all free of charge and downloadable from behringer.com. You'll be ready to go live on your PC or Mac right out of the box. A free download of more than 150 virtual instruments and FX plug-ins is provided - turning your computer into a powerful home-based or mobile recording studio from input to output.

This amazing PODCASTUDIO 2 USB setup includes a: professional 5-input XENYX 302USB mixer with the studio-grade XENYX Mic Preamp; pair of high-quality HPM1000 headphones; great-sounding XM8500 dynamic mic - and all the cables and recording/podcasting software you'll ever need.
Read more
coming soon $99.09
FORTHCOMING
Behringer SL 75C Cardioid Microphone
Cat: 772872
 
cardoid microphone
Notes: This professional-quality microphone is designed to capture the sounds with outstanding sensitivity and accuracy. With a Cardioid pickup pattern for excellent sound source separation and feedback rejection, this ultra-wide frequency response mics is an excellent choice for any performing or recording scenario - and it's rugged enough to go the distance. SL 75C is coming with integrated shock mount system, a mic stand adapter and an impact-resistant carrying case, the SL 75C is the only microphone you will ever need.

Dynamic mics have several advantages that make them ideal for live vocal applications and for recording amplified instruments. They're robust, resistant to moisture and can achieve high gain before feedback. The SL Series' Cardioid pickup pattern captures the source signal, such as a guitar amplifier or vocalist, while shunning off-axis sound. And best of all, dynamic microphones don't require any phantom power, so all you need is your mic and cable.

The SL 75C provides an amazingly flat frequency response while incorporating a smooth mid-frequency presence rise for excellent voice projection while minimizing noises. It features an extremely high output to get your voice out there! With their tough metal construction, you can count on the SL mics to come through after countless gigs and studio applications. We've even included a rugged hard case with a mic clip and stand adapter.

The SL 75C is built to be your go-to dynamic mics for years to come. It's high-quality components and extremely rugged construction can withstand the rigors of the bar circuit with ease. And with the included mic stand adapter and carrying case, the SL 75C travels along with all you need in style.
Read more
coming soon $18.50
FORTHCOMING
Behringer TD3 AM Analogue Bass Line Synthesiser (yellow)
Cat: 772986
 
bass line synthesiser
Notes: Only produced from 1981 to 1984, the Roland TB-303 was a tremendous commercial flop as a replacement for the bass guitar, however it soon found its place as one of the most-loved synthesizers for what became known as Electronic Dance Music (EDM). An ultra-affordable and faithful homage to the iconic synthesizer that spawned house music, plus an all-new Distortion circuit, the TD-3-AM lets you conjure up virtually any sound with incredible finesse and ease. With its pure analog signal path, 16-step Sequencer and authentic VCO, VCF and VCA filters, the TD-3-AM is sure to become one of your favorite synthesizers.

Great care has been taken in engineering the TD-3-AM, including the true to the original VCO, VCF and VCA designs and pure analog circuitry with matched transistors. This highly-focused attention to detail is what gives TD-3-AM its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects - all the way out to the otherworldly sounds of your imagination.

Your TD-3-AM comes ready to rock, thanks to its default signal routing that doesn't require lifting a single patch cable to instantly create amazing sounds. The highly-intuitive layout lets you easily tap into the inspired sounds of 1980s and '90s progressive rock, wave, EDM and synth-pop music tracks that made rock and roll history - or to design incredibly fat and original sounds that will make you a legend in your own right.

The very heart of TD-3-AM's sound is its versatile 24 dB/octave filter, which lets you freely experiment with the low-pass Cutoff frequency and Resonance settings to dial in the perfect sound.

TD-3-AM's authentic Voltage Controlled Oscillator (VCO) with transistor wave-shaping circuitry is ultra-easy to use and provides your choice of reverse-sawtooth or pulse waveforms for the ultimate in sound creation.

The onboard sequencer with 7 tracks allows you to program up to 16 steps of notes and rests and save them as a Pattern. You can record, save and recall up to 250 patterns, all of which can be stored in the 4 Groups. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode which allows you to interact while composing a pattern.

When you want to add even more power to your performance, just flip the Distortion On/Off switch and dial in the perfect amount of Drive to push the envelope to the max.

While it is a monophonic instrument (one note at a time), TD-3-AM's 16-note Poly Chain function lets you combine multiple synthesizers for up to 16-voice polyphony - plus provides vastly improved reliability and stability over its 1970s and '80s predecessors.

TD-3-AM has 11 controls and 28 switches to give you direct and real-time access to all important parameters, all laid out in a highly-intuitive format that puts the joy back into your music creation. And you can expand TD-3-AM's tone-sculpting capabilities beyond your wildest dreams by utilizing the multi-I/O patchbay to connect external devices.
Read more
coming soon $114.33
FORTHCOMING
Behringer DI4000 V2 4-Channel Active DI Box
Cat: 780466
 
4-channel direct input box
Notes: The ULTRA-DI PRO DI4000 gives you 4 first-class DI channels in a single rack space. Each channel is equipped with two Inputs (XLR and 14" TRS), a balanced XLR Output - and a 14" Link output to connect to your amp or monitor console. Plus, the DI4000 is designed to accommodate virtually any input signal, up to 40 dB of switchable input attenuation and up to 20 dB of gain, while our highly acclaimed OT-1 output transformers ensure pristine and powerful output.

Direct Injection (DI) boxes make it possible to connect guitars, basses and keyboards (as well as other line-level devices) to audio mixers and recorders. The DI4000 takes the DI box to the next level with a special 8 kHz High-Cut filter per channel for guitar applications, along with a Phase Reverse switch for optimal signal alignment. Additionally, our DI4000 active DI features "buffered" inputs that respect your source signal much better than passive DI boxes can - outputting optimally-balanced, extremely low-impedance (600 O) signals that are far less susceptible to noise and RF Interference (RFI).

The DI4000 does much more than just "bass guitar in, mic-level signal out". It really is a highly versatile input-signal toolkit. Here are just two advantages the DI4000 has over standard DI boxes: Maybe you'd like to connect your guitar amp's speaker output to your mixer? Not a problem, the DI4000 features two -20 dB attenuation switches per channel, allowing you to connect to speaker outputs rated up to 3,000 Watts - and convert them to balanced XLR outs! Weak incoming signal? The DI4000 has a +20 dB switch, which really comes in handy for boosting low-level input signals to balanced signals with real power and rock-solid impact. Worried about fluctuating voltages in the venue? The DI 4000 is equipped with an internal switch-mode power supply that ranges from 100 to 240 V and automatically adapts to mains voltages wherever you go. Of course, the DI4000 provides a Link output for easy connection to other equipment, such as your onstage amplifiers and monitor consoles. Servo-balanced performance guarantees ultra-flat frequency response - and the gold-plated XLR output connectors provide reliable, low-noise operation. Per channel ground-lift switches eliminate ground-loop hum issues. The DI4000 does everything a standalone DI can do, and much more - times four!
Read more
coming soon TBA
FORTHCOMING
Behringer 921B VCO Module
Behringer 921B VCO Module (oscillator module)
Cat: 780467
 
VCO module
Notes: Enter the Behringer 921B OSCILLATOR. An authentic reproduction of the circuitry from the "Modular 55 and 35" series oscillators used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 921B OSCILLATOR module is controlled by the Behringer 921A OSCILLATOR DRIVER or can be used as a free-running LFO. Separate Frequency and Range knobs allow you to adjust the frequency range in semitones and in octaves. The 921B along with the 921A modules form the foundation of a proper modular synthesizer and the basis for some really great music.

The 921B OSCILLATOR features independent audio outs for each of the 4 waveforms which include sine, triangular, sawtooth and rectangular which can be patched out to different modules to unlock even more creative possibilities. A dedicated oscillator sync input and switch can be used to sync the 921B to a signal introduced into the Sync In jack. Parallel link jacks allow the 921B to link to other 921B in the chain.

Installing the 921B OSICLLATOR is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 921B OSICLLATOR to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $108.90
FORTHCOMING
Behringer 3 Tier Eurorack Module Stand Case
Cat: 780468
 
module stand case
Notes: Behringer Eurorack Stand 3-Tier; desktop stand for mounting up to 3 Eurorack 104 cases (item 463669), or 3 Behringer synthesizers (e.g. Pro-1, Wasp Deluxe, K-2, Neutron, Model D, Cat).

Variable width (70 HP, 80 HHP or 104 HP); rugged aluminum/steel construction.
Read more
coming soon $68.59
FORTHCOMING
Behringer 140 Dual Envelope/LFO Module
Cat: 772884
 
dual envelope & LFO module
Notes: This is the Behringer SYSTEM 100 140 DUAL ENVELOPE/LFO. An authentic reproduction of the original System 100M circuitry from the 80's that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the 140 DUAL ENVELOPE/LFO in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

The 140 DUAL ENVELOPE/LFO features 2 independent ADSR envelope generators that can be controlled via an external gate or manual triggering. Each envelope generator comes with a Manual Gate that you can press and hold to start the envelope cycle; independent Attack, Decay, Sustain and Release controls to adjust the rate of these parameters and 3.5 mm envelope outputs that allows you to send up to two positive wave forms out to two modules and one negative wave form.

The LFO on the 140 comes with 5 waveforms: sine, triangle, square, ramp and saw tooth. The Frequency Range switch which sets the oscillating frequency of the LFO along with the Frequency and Delay sliders gives the 140 unparalleled flexibility when it comes to shaping LFO's. You can also connect an external trigger switch which can work with the Delay control to phase lock the LFO to your keyboard playing.

Installing the 140 DUAL ENVELOPE/LFO is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 140 to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $108.90
FORTHCOMING
Doepfer A-174-4 3D Joystick Module
Cat: 765892
 
control voltage module
Notes: Module A-174-4 modules outputs three control voltages generated by a spring-loaded X/Y cross potentiometer (so-called joy stick) and a Gate signal. The control voltages for X and Y are controlled by the X and Y position of the joystick in the usual way. The third control voltage Z is controlled by the rotation of the spring-loaded joystick knob. The Gate signal is generated by a button at the center/top of the joystick knob.

For each control voltage the non-inverted signal (X, Y, Z) as well as the inverted signal with adjustable offset (-X+XO, -Y+YO, -Z+ZO) are available. The generic joystick control voltages are bipolar, i.e. they range from typ. -5V (lowest position) via 0V (center position) to typ. +5V (highest position). The "Overlap" switches can be used to add a fixed offset voltage of typ. +5V to the non-inverting output in question so that the output voltage range changes to typ. 0...+10V (rather than -5...+5V). That's necessary if e.g. a VCA has to be controlled, which requires a pure positive control voltage range. The switches are named "overlap" because they allow the overlapping of the non-inverting CV output (X, Y, Z) with the inverting output (-X+XO, -Y+YO, -Z+ZO) for crossfading applications. With the overlap switch "on" and appropriate setting of the offset control it's possible to obtain a control voltage range of 0...+10V for the non-inverting output and +10V...0V (i.e. same range but opposite direction) for the inverting output.

The offset voltages which are added to the inverting outputs can be adjusted by means of three small potentiometers. That way different kinds of control voltage ranges are possible, e.g.
-5V ... +5V for the non-inverting output and +5V ... -5V for the inverting output ( Overlap = off, Offset = 0)
0 ... +10V for the non-inverting output and +10V ... 0V for the inverting output ( Overlap = on, Offset = max)
-5V ... +5V for the non-inverting output and +10V ... 0V for the inverting output ( Overlap = off, Offset = max)
0 ... +10V for the non-inverting output and +5V ... -5V for the inverting output ( Overlap = on, Offset = 0)
On top of this the four quadrant voltages Q1, Q2, Q3 and Q4 are available. A quadrant voltage becomes positive when the joystick is positioned in the quadrant in question.
Each CV output is equipped with an LED that displays the present voltage.

Because of the construction height of the joystick (about 7 cm) the module cannot be installed into the cases A-100P6, A-100P9, A-100PMS6, A-100PMS9 and A-100PMS12 during transportation as the depth of the case cover is not sufficient. Into the base cases A-100PB and A-100PMB as well as in all other cases without cover the module can be installed without problems.

HP : 12
Read more
coming soon TBA
FORTHCOMING
Behringer 960 Sequential Controller
Cat: 781518
 
controller module
Notes: An authentic reproduction of the circuitry from the Modular 55 series used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard EURORACK case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

100 mA +12V
50 mA -12V
0 mA 5V
47 mm deep
O 5.00


Read more
coming soon $142.65
FORTHCOMING
Behringer Pro-1 Analog Synthesiser
Cat: 781519
 
analog synthesiser
Notes: The Behringer Pro-1 is a clone of the popular retro classic Sequential Circuits Pro-One which was once conceived to be a monophonic Prophet-5. Those who know and love recordings of Depeche Mode and Yazoo, will enjoy recognizing a lot of those sounds with the Pro-1.

The two assertive oscillators, each based on a CEM3340 chip, have sawtooth and square waveforms, an octave switch, fine tuning and pulse width control. Oscillator A can be synchronized to oscillator B, the second tone generator is additionally equipped with the triangle waveform and can be switched to low mode as well as decoupled from the pitch control. Both VCOs are brought together in the mixer, where the noise generator is also located, which can be replaced by an external signal. The beautiful basic sound is processed with a characterful 24dB lowpass filter, also known as Curtis VCF. It behaves similar to a Moog filter, but due to the IC CEM3320 it sounds different than the transistor cascade. The two crisp ADSR envelopes are assigned to the filter and VCA. An LFO with three waveforms is connected to the targets via the modulation bus. The special features of this instrument include the waveforms that can be activated simultaneously in both oscillators and in the LFO.

The modulations are assigned on the left side of the control panel. The filter envelope, oscillator B and the LFO, each with their own attenuator, are available in parallel as sources. These are assigned to the targets frequency oscillator A+B, pulse width oscillator A+B and cutoff directly or via the modulation wheel (or midi controller). Wild oscillator drifts, sync sounds, sirens, FM for filter and/or oscillator A as well as pulse width modulation are possible if used with care. If you turn everything up at once, it gets really wild! The modulation bus is the hottest feature of the Pro-1 next to the sound.

The ingeniously simple sequencer provides access to two patterns, each of which can be up to 40 steps long; pauses can also be programmed. The notes are played via a connected MIDI keyboard. After the input, the patterns can be transposed with the keyboard. The Arpeggiator primarily offers the playback modes Up and Up&Down, but can also be integrated into the pattern. Synchronization to other equipment is done via the analog clock input or MIDI/USB.
Read more
coming soon $343.02
FORTHCOMING
Behringer P1 Personal In-Ear Monitor Amplifier
Cat: 781353
 
in-ear monitor
Notes: The POWERPLAY P1 Personal In-Ear Monitor (IEM) Amplifier puts control where it's most useful - right at the artist's fingertips. Whether on stage or in the studio, the P1 provides performers and recording artists with a dependable and affordable personal monitoring solution.

The P1's high-power headphone output ensures that as the band gets louder, you'll still be able to hear every nuance of your performance. And the P1's simple user interface makes it easy for everyone to dial in a perfect mix every time.

Using the P1 also helps protect your hearing in two ways. First, thanks to a built-in current limiter, unexpected peaks in signal level won't get to your ears. Second, the simple act of wearing headphones or earbuds helps isolate your ears from loud stage volume of instrument amps and monitor wedges. With the P1, you can clearly hear your own performance and blend in the ideal amount of the rest of the band.

Dual XLR inputs allow 2-channel, mono or stereo operation with a convenient mix function which allows you to run two sources into the P1 and dial-in exactly what you want to hear as you perform. Two simple controls, Level and Balance, help you achieve the perfect mix in an instant. The P1 lets you take control of what you hear and allows the engineer to concentrate on providing the audience the best listening experience. Plus, setup is so fast and easy, letting you concentrate on putting on the best performance when you hit the stage.

One little 9 V battery lasts up to 12 hours, so the P1 will go as long as your next show or studio recording session! Or, use the optional PSU-SB DC power supply for the ultimate in dependable power. And the P1's metal chassis is built like a tank to handle even your most-demanding and energetic performance. Small enough to hang on your belt - or mount on a mic or drum stand, the P1 puts complete balance and volume control in your hands.

Read more
coming soon $50.09
FORTHCOMING
Behringer EP4000 Professional 4000 Watt Stereo Power Amplifier
Cat: 781355
 
stereo power amplifier
Notes: The EP4000 builds on the incredible legacy of our EP2500, which is one of the best-selling power amps in the industry. Our proprietary Accelerated Transient Response (ATR) Technology gives the EP4000 the massive power reserves needed for deep and impactful bass response, which translates into a more natural sound quality that will bring your audience to its feet - and keep them there! With an amazing 4,000-Watts of output power (2 x 2,000 Watts @ 2 Ohms; 2 x 1,400 Watts @ 4 Ohms; 4,000 Watts @ 4 Ohms in Bridge mode), the EP4000 is the perfect amplifier for medium-sized club gigs, mobile PA systems, church services or public spaces.

The uber-simple front panel controls of these amps give you all of your sound's vital signs at a glance. After flipping the Main switch, the Power LED will light when the amp is ready for action. Both channels have independent gain dials as well as Clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also Signal LEDs that light up when a signal is present at the input.

It takes huge pulses of energy (current and voltage) to propel a woofer cone fast enough to match a bass beat. That's called Transient Response and it's the holy grail of amp designers. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of our circuitry, the EP4000 reacts instantly to even the most demanding bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.

The rear panel of every EUROPOWER EP4000 sports an array of options to help you get the most out of your amp. The built-in Clip Limiter automatically senses when the amplifier is being driven into "clipping" and momentarily reduces the input level to avoid distortion. This all happens in mere micro-seconds, making it the ideal way to ensure perfect sound all the time.

Stage vibrations, mic thumps and wind noise can cause ultra-low frequency sounds, or infrasonics - and while technically inaudible, they can be a real drain on power resources. As a solution, the EP4000 features a defeatable Low Cut Filter that eliminates frequencies below either 50 or 30 Hz (depending on your PA system's capabilities) - for better sonic performance, as well as the ultimate in loudspeaker protection. The rear panel also contains the Stereo or Bridge (mono) mode switches.

There are lots of awesome features on the outside of the EP4000, but this amplifier's beauty goes much more than just skin-deep. Inside you'll find industry-leading components, such as world-class Toshiba/Fairchild power transistors, and a custom-designed, high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects both the amplifier and your speakers. The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps the comfortably EP4000 within its normal operating range. Finally, an impact-resistant, all-steel 2U rack-mount chassis protects your investment from the rigors of the road.
Read more
coming soon $345.20
FORTHCOMING
Behringer EP2000 Professional 2000 Watt Stereo Power Amplifier
Cat: 781358
 
stereo power amplifier
Notes: The EP2000 has become one of the best-selling power amps in the industry. Our proprietary Accelerated Transient Response (ATR) Technology gives the EP2000 the massive power reserves needed for deep and impactful bass response, which translates into a more natural sound quality that will bring your audience to its feet - and keep them there! With an amazing 2,000-Watts of output power (2 x 1,000 Watts @ 2 Ohms; 2 x 750 Watts @ 4 Ohms; 2,000 Watts @ 4 Ohms in Bridge mode), the EP2000 is the perfect amplifier for medium- sized club gigs, mobile PA systems, church services or public spaces.

The uber-simple front panel controls of the EP2000 provides all of your amp's vital signs at a glance. After flipping the Main switch, the Power LED will light when the amp is ready for action. Each of the 2 channels feature dedicated Gain controls and Signal LEDs, that light up when a signal is present at the input, as well as Clip LEDs to indicate when input adjustments are required.

It takes huge pulses of energy (current and voltage) to propel a woofer cone fast enough to match a bass beat. That's called ATR or Accelerated Transient Response and it's the holy grail of amp designers. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of our circuitry, our amps react instantly to even the most demanding bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.

The rear panel of every EUROPOWER EP2000 sports an array of options to help you get the most out of your amp. The built-in Clip Limiter automatically senses when the amplifier is being driven into "clipping" and momentarily reduces the input level to avoid distortion. This all happens in mere micro-seconds, making it the ideal way to ensure perfect sound all the time.

Stage vibrations, mic thumps and wind noise can cause ultra-low frequency sounds, or infrasonics - and while technically inaudible, they can be a real drain on power resources. As a solution, the EP4000 features a defeatable Low Cut Filter that eliminates frequencies below either 50 or 30 Hz (depending on your PA system's capabilities) - for better sonic performance, as well as the ultimate in loudspeaker protection. The rear panel also contains the Stereo or Bridge (mono) mode switches.

There are lots of awesome features on the outside of the EP2000, but this amplifier's beauty goes much more than just skin-deep. Inside you'll find industry-leading components, such as world-class Toshiba/Fairchild power transistors, and a custom-designed, high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects both the amplifier and your speakers. The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps the comfortably EP2000 within its normal operating range. Finally, an impact-resistant, all-steel 2U rack-mount chassis protects your investment from the rigors of the road.

There are lots of awesome features on the outside of the EP2000, but this amplifier's beauty goes much more than just skin-deep. Inside you'll find industry-leading components, such as world-class Toshiba/Fairchild power transistors, and a custom-designed, high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects both the amplifier and your speakers. The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps the comfortably EP2000 within its normal operating range. Finally, an impact-resistant, all-steel 2U rack-mount chassis protects your investment from the rigors of the road.
Read more
coming soon $287.48
FORTHCOMING
Behringer MIC2200 v2 Vacuum Tube Mic & Line Preamplifier
Cat: 780469
 
tube microphone/line preamplifier
Notes: Tubes can really warm up a signal fast, giving it increased depth and character. Though transistors have succeeded the technology, many musicians agree that tubes deliver a far superior sound. A true audiophile 2-channel Mic/Line preamplifier, the ULTRA GAIN PRO MIC2200's hand selected 12AX7 vacuum tube gives everything from microphones to acoustic or bass guitars that vintage tube vibe in a dependable and highly-affordable package. The onboard fully parametric EQs provide unparalleled tonal characteristics, allowing you to sculpt instrument and vocal sounds with the ultimate precision and musicality.

The MIC 2200 is perfect for studio and live applications. The balanced 1/4" TRS and gold-plated XLR inputs and outputs give you maximum flexibility in either scenario. It derives its personality from a hand-selected 12AX7 tube for superior tube character and low-noise operation. The MIC 2200 is ideally suited for use with standard digital recorders and sound cards, imbuing signals with the warmth, presence and classic tube-compression that will bring your digital tracks to life.

The incredible MIC2200's controls consist of: switches for +48 V phantom power, Phase Reverse, Lo Cut, EQ Frequency Range and EQ In/Out; plus Mic Gain, Lo Cut Frequency Octave Bandwidth, Level and Output knobs. A 12-segment LED meter provides accurate monitoring of output levels. And when used as a high-end DI (Direct Injection) box in the studio or on the stage, the MIC2200 delivers flawless performance and outstanding signal integrity. For further tone conditioning, the MIC2200 features a fully parametric EQ with adjustable center Frequency, Bandwidth and Level per channel. Both channels also feature independent phase reverse switches for maximum versatility.

The ULTRAGAIN PRO MIC2200 gives you the sound quality of a 2-channel vintage tube preamp and high-end DI box all-in-one - at a mere fraction of what a true relic of the 1960s would cost.
Read more
coming soon $129.58
FORTHCOMING
Behringer 150 Ring Mod/Noise/S&H/LFO Module
Cat: 772880
 
150 ring/mod/S&H/LFO module
Notes: This is the Behringer SYSTEM 100 150 RING MOD/NOISE/S&H/LFO. An authentic reproduction of the original System 100M circuitry from the 80's that can fit in a standard Eurorack case- at a very affordable price. Mix the 150 RING MOD/NOISE/S&H/LFO in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

The 150 RING MOD/NOISE/S&H/LFO comes with a ring modulator to create some metallic and bell-like sounds that can be applied to any signal such as a sine wave or a signal from an LFO via the EXT SIG X/NOISE and EXT SIG Y/LFO jacks and out the RING MOD output. The LFO features 5 waveforms including sine, triangle square, ramp and sawtooth. Parameters can be further adjusted by the FREQ and DELAY sliders.

If you want to start layering your song on a droning note or maybe just create some ambience in your music, then you can connect any external signal source into the S&H circuit. A 3-way selector switch allows you to select which type of signal being introduced into the SIG IN jack whether its External Input, LFO or Noise.

Installing the 150 RING MOD/NOISE/S&H/LFO is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 140 to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $88.20
FORTHCOMING
Behringer Eurorack Rack
Behringer Eurorack Rack (19" Eurorack rack mount)
Cat: 780464
 
rack-mount kit with power supply
Notes: The EURORACK RACK is ideal for any Behringer Eurorack-style synthesizer or equipment. This desktop/rack-mount kit converts a 19" rack into an 84 HP Eurorack chassis. A compact 4 HP power supply with two flying bus boards are included together with a 3A universal power adapter. 52 sliding nuts allow you to easily position your modules so you can freely position your synth wherever you need it.
Read more
coming soon TBA
FORTHCOMING
Behringer 112 Dual VCO Module
Cat: 780465
 
analog dual VCO module
Notes: Eurorack module; two identical analog VCOs in one module.

Selectable waveforms: triangle, sawtooth and squarewave/pulse; adjustable pulsewidth and PWM CV input with attenuator; octave-switch and fine-tune control knob; hard and soft sync; 3 pitch CV inputs with attenuators;

Power consumption: 130mA (+12V) / 70mA (-12V); width: 16 HP; depth: 46mm
Read more
coming soon $108.90
FORTHCOMING
Behringer 995 Attenuators Module
Cat: 772930
 
attenuators module
Notes: Enter the Behringer 995 ATTENUATORS. An authentic reproduction of the circuitry from the Modular 55 and 15 series attenuators used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 995 features three separate attenuators each with their own independent inputs and outputs. The attenuators can be used to adjust the level of the input signal passively from - 8 to unity gain and accept both audio and CV signals. Connecting a single signal to the first input will allow it to pass to all 3 outputs for up to 3 variable outputs of a single signal source. Introducing a signal into the subsequent outputs will break the chain from the previous input. For example, if you have a signal in input 2, then this will feed into input 3 leaving input 1 to feed out of output 1.

Installing the 995 is simple as it was designed to fit into a standard Eurorack case. This allows for the 995 to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $59.89
FORTHCOMING
Behringer 994 Multiples Module
Cat: 772832
 
multiples module
Notes: Enter the Behringer 994 MULTIPLES Module. An authentic reproduction of the circuitry from the Modular 55 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The dual 4-socket multiples of the 994 MUTLIPLES allows you to split CV or audio signals to multiple destinations. Now, one signal can control several modules.

Installing the 994 MULTIPLES is simple as it was designed to fit into a standard Eurorack case. This allows for the 994 MULTIPLES to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $34.84
FORTHCOMING
Behringer 173 Quad Gate/Multiples Module
Cat: 772876
 
quad gate & multiples module
Notes: This is the Behringer SYSTEM 100 173 QUAD GATE/MULTIPLES. An authentic reproduction of the original System 100M circuitry from the 80s that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the 173 QUAD GATE/MULTIPLES in with your existing rig to expand its capabilities and you're sure to have a lot of fun.

The SYSTEM 100 173 QUAD GATE/MULTIPLES Module features 4 signal gates (switches) with buffered audio inputs and outputs for immediate signal switching. This provides users the option to choose between a control gate operation, non-inverting (active high) input or an inverting (active low) input.

6-channel multiples, each with 4 floating parallel connectors, are available for optimal signal integrity. You can now send out your signal to other modules to help you create more intricate patches and deliver more compelling sounds from one source.

Installing the SYSTEM 100 173 QUAD GATE/MULTIPLES is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the SYSTEM 100 173 QUAD GATE/MULTIPLES to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $91.48
FORTHCOMING
Behringer B906 Dynamic Microphone
Behringer B906 Dynamic Microphone (instrument microphone)
Cat: 772981
 
dynamic microphone
Notes: A super cardioid dynamic mic that's custom designed for great instrument reproduction! The B 906 instrument microphone is especially tailored for guitar amps, and is also excellent for percussion, horns and vocals.

The B 906 features a switchable presence filter which allows you to tailor the sound characteristics to different sound requirements and styles. The filter is adjusted via a slide switch on the microphone with different positions to boosts the presence for aggressive metal rhythm guitars or for classic rock and smooth jazz and blues sounds.

You can hang the B 906 on a guitar amp for stand-free performance. Its laterally mounted capsule has been specially developed for miking guitar amps face on and extremely close to the signal source. Due to its flat design, the B 906 is also very suitable for use with drums, since it can easily be positioned in cramped space conditions. The super cardioid pattern is great for reducing bleed in tight situations onstage, and the B 906's hum compensating coil rejects interference.
Read more
coming soon $41.37
FORTHCOMING
Behringer CB100 Condenser Gooseneck Microphone
Cat: 772994
 
condenser gooseneck microphone
Notes: CB 100 is a very directional microphone, best at isolating from other nearby instruments on stage. You chose the right mic for your instrument to ensure the greatest sound which blocks out the bleed from other sound sources.

The placement of the mics can make a huge difference on the character of the sound you create. You have chosen the right instrument mic with flexible and stable gooseneck, now all you need do is to place the mic in the sweet spot for the best harmonics and enjoy the music you make.

CB 100 is the most versatile microphone which allows you to mic up every instrument- you won't ever need another microphone for miking up.
Read more
coming soon $39.19
FORTHCOMING
Behringer TD 3 BK Analogue Bass Line Synthesiser (black)
Cat: 773200
 
line synthesiser
Notes: Only produced from 1981 to 1984, the Roland TB-303 was a tremendous commercial flop as a replacement for the bass guitar, however it soon found its place as one of the most-loved synthesizers for what became known as Electronic Dance Music (EDM). An ultra-affordable and faithful homage to the iconic synthesizer that spawned house music, plus an all-new Distortion circuit, the TD-3-BK lets you conjure up virtually any sound with incredible finesse and ease. With its pure analog signal path, 16-step Sequencer and authentic VCO, VCF and VCA filters, the TD-3-BK is sure to become one of your favorite synthesizers.

Great care has been taken in engineering the TD-3-BK, including the true to the original VCO, VCF and VCA designs and pure analog circuitry with matched transistors. This highly-focused attention to detail is what gives TD-3-BK its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects - all the way out to the otherworldly sounds of your imagination.

Your TD-3-BK comes ready to rock, thanks to its default signal routing that doesn't require lifting a single patch cable to instantly create amazing sounds. The highly-intuitive layout lets you easily tap into the inspired sounds of 1980s and '90s progressive rock, wave, EDM and synth-pop music tracks that made rock and roll history - or to design incredibly fat and original sounds that will make you a legend in your own right.

The very heart of TD-3-BK's sound is its versatile 24 dB/octave filter, which lets you freely experiment with the low-pass Cutoff frequency and Resonance settings to dial in the perfect sound.

TD-3-BK's authentic Voltage Controlled Oscillator (VCO) with transistor wave-shaping circuitry is ultra-easy to use and provides your choice of reverse-sawtooth or pulse waveforms for the ultimate in sound creation.

The onboard sequencer with 7 tracks allows you to program up to 16 steps of notes and rests and save them as a Pattern. You can record, save and recall up to 250 patterns, all of which can be stored in the 4 Groups. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode which allows you to interact while composing a pattern.

When you want to add even more power to your performance, just flip the Distortion On/Off switch and dial in the perfect amount of Drive to push the envelope to the max.

While it is a monophonic instrument (one note at a time), TD-3-BK's 16-note Poly Chain function lets you combine multiple synthesizers for up to 16-voice polyphony - plus provides vastly improved reliability and stability over its 1970s and '80s predecessors.

TD-3-BK has 11 controls and 28 switches to give you direct and real-time access to all important parameters, all laid out in a highly-intuitive format that puts the joy back into your music creation. And you can expand TD-3-BK's tone-sculpting capabilities beyond your wildest dreams by utilizing the multi-I/O patchbay to connect external devices.
Read more
coming soon $108.90
FORTHCOMING
Doepfer A-111-5 Mini Synthesiser Voice Module
Cat: 785445 Rel: 22 Oct 20
 
Synthesiser voice module
Notes: Module A-111-5 is a complete monophonic synthesizer module that includes these components (modular version of Dark Energy):

VCO
Manual tune control (with an internal jumper the range can be set to ~ +/-1 half an octave or ~ +/-2.5 octaves)
Range switch -1 / 0 / +1 octave
Frequency range about 10Hz ... 12kHz - FM (frequency modulation) control with modulation source switch (LFO1 / off / ADSR)
Manual pulsewidth control for rectangle waveform
PWM control with modulation source switch (LFO2 / off / ADSR)
Waveform switch (sawtooth / off / triangle)
The sum of the waveform chosen by this switch and the rectangle is fed into the VCF (to turn the rectangle off the PW control has to be set fully CCW)
External CV input for VCO frequency (1V/octave)
External CV input for external PWM of the rectangle - internal CV input for frequency (1V/octave) connected to the A-100 bus via jumper, the jumper can be used to interrupt this internal connection if not wanted

VCF
24 dB low pass
~ 12 octaves frequency range
Manual frequency control
Tracking switch half - off - full (internally connected to the external frequency CV input of the VCO, i.e. the VCF tracks to the VCO if the switch is set to "half" or "full" position)
XM: exponential FM (frequency modulation) control with modulation source switch (LFO2 / off / ADSR)
LM: linear FM (frequency modulation) control to modulate the VCF by the triangle of the VCO in a linear (!) manner
Manual resonance control (up to self oscillation)
External audio input (this signal is added to the VCO signal)
External CV input for filter frequency - 1V/octave tracking for usage of the VCF as a sine wave oscillator (not as precise as the VCO but much better than most of the other filters)
VCA
Manual amplitude control
AM (amplitude modulation) control with modulation source switch (LFO1 / off / ADSR)
External CV input for VCA amplitude - special control scale: exponential scale in the range from about -20dB to -80/90dB, linear scale from about -20dB to 0dB (Remark: this special control scale results in a loudness behaviour that is a bit different from pure linear or exponential VCA)
LFO1 and LFO2
Manual frequency control
Waveform switch (triangle / off / rectangle)
Range switch (low, audio, medium) - LED display (dual green/red color for positive/negative share of the signal)
The inverted LFO1 signal is available as an additional socket (to use the LFO1 signal for external modules)
An internal jumper can be used to select between the LFO1 signal or the inverted LFO1 signal

ADSR
Manual controls for Attack, Decay, Sustain, Release
Range switch (long, short, medium) - blue LED display
ADSR signal is available as an additional socket (to use the ADSR signal for external modules)
Gate input connected to the A-100 bus via jumper, the jumper can be used to interrupt this internal connection if not wanted

Remarks:
As the LFO frequencies can go up to moderate audio range (~ 5kHz) even audio FM effects of VCO (pitch and pulsewidth), VCF and ADSR are possible.

If the VCO is turned off (waveform switch = center position, pulsewidth control = fully CCW) and the VCF resonance is set to maximum the module can be used as a sine oscillator. The sine can be modulated in a linear manner from the triangle wave of the VCO and by LFO2 in an exponential manner at the same time !

From the factory the socket labelled "LFO1" outputs the inverted LFO1 signal. But as the module has several internal pin headers available even another signal may appear at this socket by changing the internal module patch. These six pin headers are available: LFO1 output, LFO2 output, ADSR output, inverter input, inverter output, output socket. The internal default patch is LFO1 -> inverter input, inverter output -> output socket (i.e. socket = inverted LFO1). But even another signal can be patched to this socket (e.g. inverted ADSR, non-inverted LFO1, inverted or non-inverted LFO2). It is also possible to add a blind panel next to the A-111-5 with a couple of sockets that are connected to the corresponding pins of the A-111-5 pc board. The in- and outputs of the VCO, VCF and VCA are not available as pin headers because the VCO, VCF and VCA are internally connected in the circuit which is used in this module.
Read more
MRP:$423.40 SAVE 17%
coming soon $352.82
FORTHCOMING
QTX Studio Monitor Speaker Stands (50cm, pair)
QTX
Cat: 785757 Rel: 24 Oct 20
 
Stands for QTX Studio Monitor Speakers
Notes: Studio Monitor Stands - 2pcs

A pair of stylish monitor stands ideal for studio, home or small projects. Supplied with floor spikes to increase stability providing a sturdy stand for monitor speakers.

The box for this item contains :

2 x Studio Monitor Stands
8 x Floor Spikes
1 x Hex Key
Pack of M6x25 fixing screws
Read more
coming soon TBA
FORTHCOMING
Arturia Keylab 88 MKII 88-Note Controller Keyboard
Cat: 786254 Rel: 29 Oct 20
 
Controller keyboard
Notes: A world-class hammer action, piano-feel keybed to put your heart and soul into your music. KeyLab 88 MkII is highly expressive, and will give you that real mechanical feeling, just like playing an acoustic piano.

Whether you're an experienced veteran of the industry, or just starting out as a music producer, you'll love the awesome instruments that come with KeyLab MkII 88. Get your KeyLab 88 MkII and you'll also get Analog Lab, Piano V, Wurli V, Vox Continental V - the full versions absolutely free!

Ableton Live Lite is also included so you can get creative right out of the box.

Tour ready
Beautiful, but ergonomic. Stylish, but understandable. Robust, but elegant. KeyLab MkII 88 has been specially designed with touring professionals in mind. Its aluminum and wood chassis don't bend or flex as you play, its build quality is unmatched.

Awesome integration
With smart-mapping controls, clear labels, and even unique magnetic strips for each DAW, KeyLab 88 MkII takes the guesswork out of playing, recording, and mixing. The rotary knobs, faders, and
buttons are all automatically assigned to the most appropriate parameters in any Arturia software instrument, but it doesn't stop there- KeyLab 88 MkII features CV/gate connectivity so you can also control your modular rig and vintage synths. It features MIDI ports, as well as MIDI over USB. It can even draw all its power via the same USB connection! The finest feeling 88-note hammer action controller keyboard, great looks, built for the road, and tons of top-quality virtual instruments. It's time to feel the music. This isn't just a MIDI controller. It's a gateway to a better music-making experience.

Included Software
Snalog Lab, Piano V, Wurli V, Vox Continental V, and Ableton Live Lite, MIDI Control Center
Read more
MRP:$1,083.34 SAVE 17%
coming soon $902.78
FORTHCOMING
Arturia Keylab 88 MKII Limited Edition Power Trio Bundle With V Collection 6 & Wooden Legs
Cat: 786250 Rel: 29 Oct 20
 
Music software bundle
Notes: In line with Arturia's mission to give people powerful tools to fulfil their artistic destiny, they have released a limited edition bundle of impressive music gear with style. This all-you-need package includes the ultimate MIDI controller, KeyLab 88 MkII, supported by sturdy, timeless looking wooden legs, all powered up with V Collection 6, a library of synths that made music history.

Stand out with style and elevate your inspiration to new heights. Whether you want to go on stage or make your home setup look classy, this bundle brings you a complete setup for sophisticated and modern music production.

WHAT'S INCLUDED IN THE BUNDLE?

KeyLab 88 MkII

KeyLab 88 MkII is the definitive 88-note controller for rich music production with an authentic piano feel. It's the most expressive, intricate, and powerful controller you can wish for. Its dynamic performance and studio controls create an intuitive way to guide your music flow. Enjoy its effortless integration with other pieces of gear thanks to its CV/gate connectivity, MIDI ports, and MIDI over USB. Add the timeless design to match its looks with its power, and you've got star quality foundation.

V Collection 6

V Collection 6 offers 20 legendary instruments that made music history, modernized for contemporary production. A library of awesome analog synths, powerful digital instruments, and famous pianos and keyboards, this pack means serious business. More than 7,400 inspiring presets to browse from. For the musicians who want to power up their music with legendary sounds and style. Wooden legs Support your music with a timeless style. Elegant for the living room, stylish for the stage, made with beautiful solid ash with cinnamon finish. This set of wooden legs securely attaches to KeyLab Mk II's chassis. Tried and tested for live shows, you can rest assured its sturdy structure will sup-port your setup as you go wild for your audience. Dealing with an uneven surface? No problem. You can adjust each leg length thanks to its smart screw based mechanical system. Mounting is child's play - you'll only need 5 minutes to follow the simple instructions that come in the box.

Included Software
V Collection 6
Analog Lab 4
Arturia Software Center

20 iconic instruments with V Collection 6, modernized for the music production of today: Buchla Easel V, Mini V, Matrix-12 V, Solina V, Jup-8 V, ARP 2600 V, CS-80 V, Prophet V, Modular V, Synthi V; CMI V, Synclavier V, Clavinet V, Piano V, Stage-73 V, Farfisa V, Wurli V, VOX Continental V, B-3 V.
Read more
MRP:$1,253.22 SAVE 17%
coming soon $1,044.36
FORTHCOMING
Magma CTRL Case MPC One For Akai MPC One Sampler & Sequencer
Cat: 779623
 
Custome case for Akai MPC One Sampler & Sequencer
Notes: The CTRL Case MPC ONE is custom designed to a hold the new AKAI MPC ONE and is a very lightweight and convenient solution to carry your sampling workstation well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize audio cables and accessories.

FITS:
Akai MPC One

SPECS
Outer measures: 32 x 32 x 13,5 cm
Inner measures: 28 x 28 x 10 cm
Weight: 0,8 kg
Read more
MRP:$65.34 SAVE 17%
coming soon $54.44
FORTHCOMING
2hp Pitch Module (black faceplate)
2hp
Cat: 766655
 
pitch shifter module
Notes: Time domain pitch shifter with flutter control.
Read more
MRP:$143.75 SAVE 17%
coming soon $119.79
FORTHCOMING
2hp Pitch Module (silver faceplate)
2hp
Cat: 766651
 
pitch module
Notes: Time domain pitch shifter with flutter control.
Read more
MRP:$143.75 SAVE 17%
coming soon $119.79
FORTHCOMING
4ms Row Power 45 Power Solution module For Eurorack Systems (black)
Cat: 785962 Rel: 27 Oct 20
 
Power solution module
Notes: Row Power is a clean, regulated, and protected power solution for Eurorack systems. Row Power 45 provides enough power for two to three typical Eurorack rows (typically up to about 312HP):
+12V @ 2.0A maximum, 1.5A recommended
-12V @ 1.4A maximum, 1.2A recommended
+5V @ 1.5A maximum, 1.2A recommended

Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying bus cables or the Bus Stick. For custom power systems, the Row Power 45 has a set of easily soldered holes for using large gauge wire or MTA156 connectors to connect to distribution bus boards.

Multiple Row Power modules can be powered from a single power brick by daisy-chaining with an inexpensive barrel cable. The Row Power 45 can also be daisy-chained to 4ms Company's Pod enclosures. Each power supply is independently regulated and protected for ultra-low cross-talk between rows/pods.

The Row Power 45 is compatible with the 4ms Row Power Shield. This device (sold separately) attaches to the back of the Row Power 45 and monitors the amount of current being drawn, as well as the voltages of the power rails. The information is sent over Bluetooth to be displayed on a phone or tablet.

Electrical and Mechanical Specifications

Module Size:
4 HP Eurorack format module

Power Output:
Maximum average load under normal conditions: +12V @ 2.0A, -12V @ 1.4A, +5V @ 1.5A
Maximum average load under any condition: +12V @ 1.5A, -12V @ 1.2A, +5V @ 1.2A
Powered by laptop-style DC power supply: 2.1mm barrel, positive center, 15V-20V.

Included with the Row Power 45:
16-to-16 pin power cable
2 M3 Knurlie screws
Read more
MRP:$198.63 SAVE 17%
coming soon $165.52
FORTHCOMING
Teenage Engineering CA-X Universal Silicone Case For Pocket Operators (yellow)
Cat: 784918 Rel: 16 Oct 20
 
Silicone case
Notes: Add the silicone pro case to protect your pocket operator and get anti-slip feet, neck strap, battery protection and pro feel buttons.
Read more
MRP:$30.06 SAVE 17%
coming soon $25.05
FORTHCOMING
Teenage Engineering CA-X Universal Silicone Case For Pocket Operators (grey)
Cat: 784919 Rel: 16 Oct 20
 
Silicone case
Notes: Add the silicone pro case to protect your pocket operator and get anti-slip feet, neck strap, battery protection and pro feel buttons.
Read more
MRP:$30.06 SAVE 17%
coming soon $25.05
FORTHCOMING
Teenage Engineering Limited Edition PO Ultimate Punch Pocket Operator Bundle
Cat: 784909 Rel: 16 Oct 20
 
Pocket operator bundle
Notes: Beats from the famous PO-12 rhythm, melodic 8-bit computer-gamey chiptune sounds from PO-20 arcade, plus the PO-33 K.O! with its ability to sample the whole world around you.

Read more
MRP:$299.26 SAVE 20%
coming soon $239.58
FORTHCOMING
Befaco Male DIN5 To TRS Minijack Cable (1.5m, pack of 3)
Cat: 784170 Rel: 08 Oct 20
 
DIN5 to TRS cable
MRP:$14.37 SAVE 24%
coming soon $10.89
FORTHCOMING
Befaco Minijack To Jack Cable (1m, pack of 3)
Cat: 784176 Rel: 08 Oct 20
 
Minijack to jack cable
Notes: The Minijack - Jack Cable is a high quality 1 metre audio cable that features both 1/4 Inch Jack and 1/8 Inch minijack connections.

High Quality Shielded Cable

Mono 1/4 inch jack connector

Mono 3.5mm minijack connector

Length: 1 Metre
Read more
MRP:$14.37 SAVE 24%
coming soon $10.89
FORTHCOMING
Reloop sPodcaster Go Professional USB Podcast Microphone
Cat: 783826 Rel: 30 Sep 20
 
USB podcast microphone
Notes: Quality and flexibility are more important than ever for musicians and podcasters nowadays. The professional USB condenser microphone continues the successful sPodcaster series in an outstanding retro design and is built in a portable and slim aluminium housing.

Both the dubbing of musical instruments and the recording of speech and vocals, whether on the road or in project studios, are recorded in studio quality with high-quality A/D converters, thanks to the integrated audio interface (class compliant). Thanks to the advantageous cardioid polar pattern, the system is directed towards a sound source, so that ambient noise and feedback are largely cancelled out.

The 3.5 mm jack connector on the back panel allows you to connect headphones or speakers to listen instantly to the recording. All of the computer's audio output is thus played back via the sPodcaster Go's audio interface and can be comfortably adjusted using the volume buttons. A USB connection between PC or Mac is plug 'n' play without any additional driver installation and also supplies the microphone with power.

The tabletop stand, pre-mounted on the underside of the microphone, folds completely to transport the sPodcaster Go in a space-saving manner. Alternatively, the table stand can be unscrewed to allow attachment to a conventional stand with M10 threads. The sPodcaster Go's rugged construction makes it well-prepared for the daily challenges of mobile use.

The Reloop sPodcaster Go includes a matching USB cable and a functional carrying bag.

Professional USB condenser microphone for portable podcasting
Perfect for recording on the go and smaller studio environments
Integrated USB audio interface (class compliant)

Technical Data
Voltage: USB feed, 5.0 V
Sensibility: -65 i5 dB @ 1 kHz
S/N ratio: -59 dB
Frequency range: 50 Hz - 18 kHz
Plug&Play compatible with Windows Vista, XP, 8 and Mac OS X
Connection: USB
Dimensions: 148 x 65 x 56 mm
Weight: 350 g
Incl. USB cord, table stand and software
Read more
MRP:$71.87 SAVE 17%
coming soon $59.89
FORTHCOMING
Teenage Engineering OP-Z Grip Knob Kit
Cat: 784902 Rel: 16 Oct 20
 
Knob kit
Notes: Additional grip knobs for the OP-Z
Read more
MRP:$32.67 SAVE 17%
coming soon $27.22
FORTHCOMING
Teenage Engineering CA-X Universal Silicone Case For Pocket Operators (burgundy)
Cat: 784915 Rel: 16 Oct 20
 
Silicone case
Notes: Add the silicone pro case to protect your pocket operator and get anti-slip feet, neck strap, battery protection and pro feel buttons.
Read more
MRP:$30.06 SAVE 17%
coming soon $25.05
Artículos del 1 al 50 de 604 en la página 1 de 13
1  2  3  ...  13  »

Filter

Coming Soon: Studio Equipment
Close