100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

Inicio  Coming Soon  

Studio Equipment

Options
Artículos del 1 al 50 de 601 en la página 1 de 13
1  2  3  ...  13  »
FORTHCOMING
Intellijel MIDI Expander 1U Module
Cat: 785362 Rel: 21 Oct 20
coming soon TBA
FORTHCOMING
Behringer DI4000 V2 4-Channel Active DI Box
Cat: 780466
 
4-channel direct input box
Notes: The ULTRA-DI PRO DI4000 gives you 4 first-class DI channels in a single rack space. Each channel is equipped with two Inputs (XLR and 14" TRS), a balanced XLR Output - and a 14" Link output to connect to your amp or monitor console. Plus, the DI4000 is designed to accommodate virtually any input signal, up to 40 dB of switchable input attenuation and up to 20 dB of gain, while our highly acclaimed OT-1 output transformers ensure pristine and powerful output.

Direct Injection (DI) boxes make it possible to connect guitars, basses and keyboards (as well as other line-level devices) to audio mixers and recorders. The DI4000 takes the DI box to the next level with a special 8 kHz High-Cut filter per channel for guitar applications, along with a Phase Reverse switch for optimal signal alignment. Additionally, our DI4000 active DI features "buffered" inputs that respect your source signal much better than passive DI boxes can - outputting optimally-balanced, extremely low-impedance (600 O) signals that are far less susceptible to noise and RF Interference (RFI).

The DI4000 does much more than just "bass guitar in, mic-level signal out". It really is a highly versatile input-signal toolkit. Here are just two advantages the DI4000 has over standard DI boxes: Maybe you'd like to connect your guitar amp's speaker output to your mixer? Not a problem, the DI4000 features two -20 dB attenuation switches per channel, allowing you to connect to speaker outputs rated up to 3,000 Watts - and convert them to balanced XLR outs! Weak incoming signal? The DI4000 has a +20 dB switch, which really comes in handy for boosting low-level input signals to balanced signals with real power and rock-solid impact. Worried about fluctuating voltages in the venue? The DI 4000 is equipped with an internal switch-mode power supply that ranges from 100 to 240 V and automatically adapts to mains voltages wherever you go. Of course, the DI4000 provides a Link output for easy connection to other equipment, such as your onstage amplifiers and monitor consoles. Servo-balanced performance guarantees ultra-flat frequency response - and the gold-plated XLR output connectors provide reliable, low-noise operation. Per channel ground-lift switches eliminate ground-loop hum issues. The DI4000 does everything a standalone DI can do, and much more - times four!
Read more
coming soon TBA
FORTHCOMING
Doepfer A-174-4 3D Joystick Module
Cat: 765892
 
control voltage module
Notes: Module A-174-4 modules outputs three control voltages generated by a spring-loaded X/Y cross potentiometer (so-called joy stick) and a Gate signal. The control voltages for X and Y are controlled by the X and Y position of the joystick in the usual way. The third control voltage Z is controlled by the rotation of the spring-loaded joystick knob. The Gate signal is generated by a button at the center/top of the joystick knob.

For each control voltage the non-inverted signal (X, Y, Z) as well as the inverted signal with adjustable offset (-X+XO, -Y+YO, -Z+ZO) are available. The generic joystick control voltages are bipolar, i.e. they range from typ. -5V (lowest position) via 0V (center position) to typ. +5V (highest position). The "Overlap" switches can be used to add a fixed offset voltage of typ. +5V to the non-inverting output in question so that the output voltage range changes to typ. 0...+10V (rather than -5...+5V). That's necessary if e.g. a VCA has to be controlled, which requires a pure positive control voltage range. The switches are named "overlap" because they allow the overlapping of the non-inverting CV output (X, Y, Z) with the inverting output (-X+XO, -Y+YO, -Z+ZO) for crossfading applications. With the overlap switch "on" and appropriate setting of the offset control it's possible to obtain a control voltage range of 0...+10V for the non-inverting output and +10V...0V (i.e. same range but opposite direction) for the inverting output.

The offset voltages which are added to the inverting outputs can be adjusted by means of three small potentiometers. That way different kinds of control voltage ranges are possible, e.g.
-5V ... +5V for the non-inverting output and +5V ... -5V for the inverting output ( Overlap = off, Offset = 0)
0 ... +10V for the non-inverting output and +10V ... 0V for the inverting output ( Overlap = on, Offset = max)
-5V ... +5V for the non-inverting output and +10V ... 0V for the inverting output ( Overlap = off, Offset = max)
0 ... +10V for the non-inverting output and +5V ... -5V for the inverting output ( Overlap = on, Offset = 0)
On top of this the four quadrant voltages Q1, Q2, Q3 and Q4 are available. A quadrant voltage becomes positive when the joystick is positioned in the quadrant in question.
Each CV output is equipped with an LED that displays the present voltage.

Because of the construction height of the joystick (about 7 cm) the module cannot be installed into the cases A-100P6, A-100P9, A-100PMS6, A-100PMS9 and A-100PMS12 during transportation as the depth of the case cover is not sufficient. Into the base cases A-100PB and A-100PMB as well as in all other cases without cover the module can be installed without problems.

HP : 12
Read more
coming soon TBA
FORTHCOMING
Behringer Eurorack Rack
Behringer Eurorack Rack (19" Eurorack rack mount)
Cat: 780464
 
rack-mount kit with power supply
Notes: The EURORACK RACK is ideal for any Behringer Eurorack-style synthesizer or equipment. This desktop/rack-mount kit converts a 19" rack into an 84 HP Eurorack chassis. A compact 4 HP power supply with two flying bus boards are included together with a 3A universal power adapter. 52 sliding nuts allow you to easily position your modules so you can freely position your synth wherever you need it.
Read more
coming soon TBA
FORTHCOMING
QTX Studio Monitor Speaker Stands (50cm, pair)
QTX
Cat: 785757 Rel: 24 Oct 20
 
Stands for QTX Studio Monitor Speakers
Notes: Studio Monitor Stands - 2pcs

A pair of stylish monitor stands ideal for studio, home or small projects. Supplied with floor spikes to increase stability providing a sturdy stand for monitor speakers.

The box for this item contains :

2 x Studio Monitor Stands
8 x Floor Spikes
1 x Hex Key
Pack of M6x25 fixing screws
Read more
coming soon TBA
FORTHCOMING
Super Slim Single DVD Library Box - Pack Of 10
Cat: 779419
 
DVD library box
Notes: Pack of 10 with white pocket- holds 1 disc.
Read more
coming soon TBA
FORTHCOMING
Tangerine Dream: Itinerary: The Concert Memorabilia 1970-2014
Cat: 779750
 
10x12" memorabilia collection in coffee-table book format
Notes: This complex work is a painstakingly detailed and incredibly massive exhibit of Tangerine Dream's paper past. Presented in a 10x12" (ca. 25x30 cm) coffee-table book format - specifically designed to sit beside Edgar's Force Majeure autobiography perfectly, "Itinerary" has a scope of about 452 pages, and contains over 1,100 images of TD's posters, flyers, tickets, passes, programs, invitations, contracts, stage plots, spreadsheets, memos, itineraries, telexes, receipts, press releases, etc. - all of which has been described by one of the world's leading collectors of music memorabilia to be "the most astonishing collection of memorabilia by one band" he's ever seen.
Read more
coming soon TBA
FORTHCOMING
LEP Leploop Sequencer & Drum Machine Analogue Synthesiser
LEP Leploop Sequencer & Drum Machine Analogue Synthesiser (sequencer & drum machine synthesiser)
Cat: 770286
 
analogue synthesiser
Notes: Laboratorio Elettronico Popolare (L. E. P. ) is proud to present to you a one-of-a kind analog synthesizer, sequencer and drum-machine: LEPLOOP.

Small in nature but aggressive in sound, the user will be able to create a variety of analog timbres and beats.

LEPLOOP was designed to be a minimalist electronic music live-performance groove-box, which can be used to create a variety of electronic musical styles.

The LEPLOOP can be synched via MIDI to another LEPLOOP for tempo-synched operation or to another MIDI device or sequencer to receive sequence stop & start instructions.

1 oscillator (VCO1) triangular/square wave
1 oscillator (VCO2) sawtooth wave with ring modulator and FM modulation
White noise generator
24 dB/OCT Low pass filter
Kick drum with distorsion and trigger mixer
2 VCA's
2 AR Envelope generators
1 LFO
16 Capacitors analo sequencer PWM programmable
4 Track digital rhythm sequencer 64 step each track
4 Channel audio mixer
Midi input(clock and notes)
5 CV out: S\H, SEQ, LFO, ENV1, ENV2
3 gate out: S\H, SEQ, CASSA
3 CV in: VCO1, VCO2, VCF cutoff
1 audio in (VCF)
4 audio out: MIXER, CASSA, VCO2, VCO mix
1 clock output: clock 24, MIDI start/stop
EEPROM memory 16 banks 10 pattern each
Read more
coming soon TBA
FORTHCOMING
LEP Leploop Bag
LEP Leploop Bag (synthesiser bag)
Cat: 770289
 
soft case
Notes: Hand made leploop soft case, with fine textile from fashion designing in Milano.

Colors and finiture may change.
Read more
coming soon TBA
FORTHCOMING
Sonicware Liven 8bit Warps Synthesiser & Sequencer
Cat: 762318
 
waveform memory synthesiser & sequencer
Notes: The LIVEN 8bit warps combines an 8-bit waveform memory synthesizer with a step sequencer.

Carefully selected preset waveforms and editable user waveforms along with high-quality filters and effects can be used freely to create a wide spectrum of sounds. The LIVEN 8bit warps can generate classic retro game sounds of course, but its unique 8-bit sound can also be used in a range of music genres, including EDM, hip-hop, techno and rock.

Powerful functions for live electronic music performance include 16 physical control knobs, parameter locking for each sequencer step, a looper, and SYNC IN/OUT and MIDI IN/OUT connectors to make synchronized performance with other equipment easy.

All these powerful functions are in a device that weighs only 790 g. Play it anywhere at any time.
Read more
coming soon TBA
FORTHCOMING
ADDAC System ADDAC806 Bluetooth Audio Module (red faceplate)
Notes: This small module will allow you to send wireless audio signals from any bluetooth compatible device straight to your modular.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 4.5 cm

Electrical:
. Max current: 75mA on each rail
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
coming soon TBA
FORTHCOMING
EMW X-Drum 12-Bit Drum Module (black faceplate)
coming soon TBA
FORTHCOMING
Befaco Male DIN5 To TRS Minijack Cable (1.5m, pack of 3)
Cat: 784170 Rel: 08 Oct 20
 
DIN5 to TRS cable
MRP:$14.38 SAVE 24%
coming soon $10.89
FORTHCOMING
Befaco Minijack To Jack Cable (1m, pack of 3)
Cat: 784176 Rel: 08 Oct 20
 
Minijack to jack cable
Notes: The Minijack - Jack Cable is a high quality 1 metre audio cable that features both 1/4 Inch Jack and 1/8 Inch minijack connections.

High Quality Shielded Cable

Mono 1/4 inch jack connector

Mono 3.5mm minijack connector

Length: 1 Metre
Read more
MRP:$14.38 SAVE 24%
coming soon $10.89
FORTHCOMING
Tangible Waves AE Modular Narrow Bus Cable
Cat: 786537 Rel: 30 Oct 20
 
Bus cable
Notes: The Bus Cable connects the AE modular modules, it contains the power supply (GND, +5V) and CV, Gate, Controller, MIDI-clock / start / stop in a 10-pin ribbon cable. The folding pattern makes it possible to mount / unmount the module connected to the Iable.

PLEASE NOTE: This type 1 is for the NARROW racks (1-row or 2-row), for a 2-row rack you need two of this cable.
Read more
MRP:$15.69 SAVE 17%
coming soon $13.06
FORTHCOMING
Tangible Waves AE Modular Case Hinge Kit Type 2
Cat: 786533 Rel: 31 Oct 20
MRP:$16.99 SAVE 17%
coming soon $14.16
FORTHCOMING
Tangible Waves AE Modular Case Hinge Kit Type 1
Cat: 786535 Rel: 31 Oct 20
 
Case hinge kit
Notes: The case hinge kit allows it to join two cases at a free angle. It contains:

two joint elements
four screws
a connection cable between the cases.

This type is designed for an application where one case is flat on the surface and the other one mounted at a certain angle. The triangle shape has the advantage that the contact to the surface is exteded to the rear side so the complete unit has a stable stand.

Via the connection cable the bus and power supply is shared between both cases, so no extra power supply / second MASTER module is needed for the additional case.
Read more
MRP:$18.30 SAVE 17%
coming soon $15.24
FORTHCOMING
Tangible Waves AE Modular Standard Bus Cable
Cat: 786536 Rel: 31 Oct 20
MRP:$18.30 SAVE 17%
coming soon $15.24
FORTHCOMING
Citronic SMS001 Small Studio Swivel Microphone Boom Arm
Citronic SMS001 Small Studio Swivel Microphone Boom Arm (small studio microphone desk stand)
Cat: 785763 Rel: 24 Oct 20
 
Microphone boom arm
Notes: A professional microphone boom arm with desk clamp for studio or broadcasting use. Featuring spring retraction for quick and smooth positioning and a lockable hinge for safety.

Rotates 360°
Features spring retraction and a lockable hinge
Microphone clip supplied
For desks with a maximum depth of 50mm

Read more
MRP:$18.30 SAVE 17%
coming soon $15.24
FORTHCOMING
Citronic SMS002 Large Studio Swivel Microphone Boom Arm
Citronic SMS002 Large Studio Swivel Microphone Boom Arm (large studio microphone desk stand)
Cat: 785764 Rel: 24 Oct 20
 
Microphone boom arm
Notes: A professional microphone boom arm with desk clamp for studio or broadcasting use. Featuring spring retraction for quick and smooth positioning and a lockable hinge for safety.

Rotates 360°
Features spring retraction and a lockable hinge
Microphone clip supplied
For desks with a maximum depth of 50mm
Read more
MRP:$19.61 SAVE 17%
coming soon $16.33
FORTHCOMING
Tangible Waves AE Modular Patchwires Starter Set (6x10cm, 6x17cm, 6x25cm, 6x40cm)
Cat: 786510 Rel: 31 Oct 20
 
Patchwires starter set
Notes: A set of Patchwires for AE modular with different lengths (10, 17, 25, 40 cm), 6 pieces of each length.

Cable has a soft, flexible silicone insulation, with a gold plated pin.
Read more
MRP:$20.92 SAVE 17%
coming soon $17.43
FORTHCOMING
Behringer SL 75C Cardioid Microphone
Cat: 772872
 
cardoid microphone
Notes: This professional-quality microphone is designed to capture the sounds with outstanding sensitivity and accuracy. With a Cardioid pickup pattern for excellent sound source separation and feedback rejection, this ultra-wide frequency response mics is an excellent choice for any performing or recording scenario - and it's rugged enough to go the distance. SL 75C is coming with integrated shock mount system, a mic stand adapter and an impact-resistant carrying case, the SL 75C is the only microphone you will ever need.

Dynamic mics have several advantages that make them ideal for live vocal applications and for recording amplified instruments. They're robust, resistant to moisture and can achieve high gain before feedback. The SL Series' Cardioid pickup pattern captures the source signal, such as a guitar amplifier or vocalist, while shunning off-axis sound. And best of all, dynamic microphones don't require any phantom power, so all you need is your mic and cable.

The SL 75C provides an amazingly flat frequency response while incorporating a smooth mid-frequency presence rise for excellent voice projection while minimizing noises. It features an extremely high output to get your voice out there! With their tough metal construction, you can count on the SL mics to come through after countless gigs and studio applications. We've even included a rugged hard case with a mic clip and stand adapter.

The SL 75C is built to be your go-to dynamic mics for years to come. It's high-quality components and extremely rugged construction can withstand the rigors of the bar circuit with ease. And with the included mic stand adapter and carrying case, the SL 75C travels along with all you need in style.
Read more
coming soon $18.51
FORTHCOMING
Tangible Waves AE Modular Wide Bus Cable
Cat: 786538 Rel: 31 Oct 20
 
Bus cable
Notes: The Bus Cable connects the AE modular modules, it contains the power supply (GND, +5V) and CV, Gate, Controller, MIDI-clock / start / stop in a 10-pin ribbon cable. The folding pattern makes it possible to mount / unmount the module connected to the Iable.

PLEASE NOTE: This type 1 is for the WIDEracks (1-row or 2-row), for a 2-row rack you need also two of this cables.
Read more
MRP:$22.22 SAVE 17%
coming soon $18.51
FORTHCOMING
Miditech MP-1 Sustain Pedal
Cat: 784475 Rel: 10 Oct 20
 
Sustain pedal
Notes: The MP-1 is a strong pedal, which has a long switch, and works nearly wihout own noises. Because the polarity is switchable, it is not only compatible to Miditech masterkeyboards, but also it works with all usable master- and MIDI-keyboards from all other companies with a standard sustain input jack socket.
Read more
MRP:$23.53 SAVE 17%
coming soon $19.59
FORTHCOMING
SynthRotek Passive Mult Module (black faceplate) (fully assembled)
Cat: 778295
 
passive multiplier module
Notes: The Synthrotek Passive Mult is the module that keeps on giving! Use this as either a 2x 1-to-3 passive multiplier or one 1-to-6 passive multiplier. Input one cascades to all 6 output jacks, or can be interrupted by plugging a cable into input two.

What is a passive mult? It is an ideal way of multiplying non-precise voltages in your Eurorack system. (Buffered multiples like the MST '07 Buff Mult are needed to maintain exact outputs of input voltages). Multiply any control voltage or audio sources across your system with ease in a very small and well priced package.

Available as an assembled unit, kit or PCB/panel combo. With such a small part count, this is a great module for first-time DIYers!

Specifications:
Width: 2HP
Depth: 14mm
Current draw: n/a
Read more
MRP:$23.53 SAVE 13%
coming soon $20.43
FORTHCOMING
Intellijel XY I/O 1U Module
Cat: 785358 Rel: 21 Oct 20
 
Conncector for Intellijel products
Notes: Use this module to tap into the 3-pin LINK connector used in several Intellijel products, including Mixup, Pedal I/O and the Palette and 2nd Generation Audio Jacks Board in a 7U case.

The XY I/O uses two 3.5mm TRS jacks, which accept insert cables to provide send/return capability to a pair of Pedal I/O's, or additional stereo inputs (or outputs) to a pair of Mixups, or one of each.

A third 3-pin Link connector on the back panel allows the X and Y jacks to access the L/R (or Send/Return) jacks on a single connected module or case without needing a stereo cable.
Read more
MRP:$27.45 SAVE 17%
coming soon $22.86
FORTHCOMING
Tangible Waves AE Modular 4BUFFER Buffered & Switchable Multiples Module
Cat: 786473 Rel: 31 Oct 20
 
Buffered & switchable multiples module
Notes: Buffered, switchable multiples for precise CV signals

The 4BUFFER module is a buffered multiple of 1 in to 2 out, with the option to chain the channels together to create a total of 8 outputs for one input or other combinations. Buffered multiples have the advantage over the normal passive mults in that there are no voltage drops across the signal path. As the AE system matures into more precision regarding oscillator tracking etc. this is a helpful utility for various situations.

Module power consumption: 1 mA
Read more
MRP:$27.45 SAVE 17%
coming soon $22.86
FORTHCOMING
Teenage Engineering CA-X Universal Silicone Case For Pocket Operators (burgundy)
Cat: 784915 Rel: 16 Oct 20
 
Silicone case
Notes: Add the silicone pro case to protect your pocket operator and get anti-slip feet, neck strap, battery protection and pro feel buttons.
Read more
MRP:$30.07 SAVE 17%
coming soon $25.06
FORTHCOMING
Teenage Engineering CA-X Universal Silicone Case For Pocket Operators (yellow)
Cat: 784918 Rel: 16 Oct 20
 
Silicone case
Notes: Add the silicone pro case to protect your pocket operator and get anti-slip feet, neck strap, battery protection and pro feel buttons.
Read more
MRP:$30.07 SAVE 17%
coming soon $25.06
FORTHCOMING
Teenage Engineering CA-X Universal Silicone Case For Pocket Operators (grey)
Cat: 784919 Rel: 16 Oct 20
 
Silicone case
Notes: Add the silicone pro case to protect your pocket operator and get anti-slip feet, neck strap, battery protection and pro feel buttons.
Read more
MRP:$30.07 SAVE 17%
coming soon $25.06
FORTHCOMING
EMW Patch 1 Module (black faceplate)
Cat: 775800
 
patch module
Notes: 4 HP patch (multiples) module with 3 independent groups of 3 connections each.

Eurorack (3U) form factor - 4 HP width
Power consumption: +12V [0mA] / -12V [0mA]
Weight: 23g
Depth: 22mm
Read more
MRP:$30.07 SAVE 17%
coming soon $25.06
FORTHCOMING
TC Helicon Go Guitar Portable Guitar Interface For Mobile Devices
Cat: 781363
 
Portable guitar interface
Notes: The amazing GO GUITAR is the only mobile interface you'll need to record quick, on-the-go riffs anywhere, anytime with your iOS, Android, Mac or PC mobile device. Just want to practice without the hassle of hauling around amps or blowing your roof off? Simply plug your electric or bass guitar into GO GUITAR along with your favorite pair of headphones. Jam or record literally anywhere you can fit yourself and your guitar.

Whether you're in your kitchen, relaxing in the park, or on the tour bus, GO GUITAR lets you create whenever and wherever the mood strikes. All you need is this simple guitar interface, a mobile device, and of course, your guitar!

Want to add some effects to your guitar or record the riffs you've been working on? GO GUITAR integrates seamlessly with the creative suite of TC Helicon mobile apps. When it comes to sparking your creativity, TC Helicon has you covered with an extensive array of mobile applications designed specifically for your GO GUITAR device, including effects, processing and much more - plus they are all free to download from your app store! And if that's not enough, GO GUITAR is also compatible with a wide range of apps and software from 3rd-party vendors.

Whether you want to jam in silence, or provoke noise-induced rage into your neighbors, GO GUITAR has you covered. Just connect some headphones to your GO GUITAR and hear yourself as you record or play with crystal clarity.

Yes, the word "Guitar" is in the name, but that's not GO GUITAR's only game! You can also use the line-in for your keyboard, mixer, or any other line-level audio device. GO GUITAR records high-quality recordings.

Once you've solidified that hit-making hook, feel confident that you can capture high quality audio directly to your iOS, Android, Mac, or PC device using your favorite recording DAW. GO GUITAR ensures a broad dynamic range for a distortion-free audio signal so you can rest assured that the recording you create will compete with the rest of the world.

For those times when you're crammed into an awkward space with nowhere to put your GO GUITAR, you can use the integrated clip and easily strap it onto your belt or guitar strap.



Read more
coming soon $25.87
FORTHCOMING
Tangible Waves AE Modular OR2x4 CV Generation & Manipulation Module
Cat: 786483 Rel: 31 Oct 20
 
CV generation & manipulation module
Notes: The OR2x4 module combines 2x4 inputs by logical OR rule; the input signals are usually trigger/gate signals and are treated as digital signals.

This can be used either for "mixing" gate/trigger signals from different sources or for audio signals. too.

There are two independent units with four inputs each. With a switch all eight inputs can be linked to an 8-input OR.

With the GATE inputs the signal can be controlled further; if GATE gets a "low" signal then the output is low also. By this, the output can be synced to a common clock signal and even if one of the inputs remains high the output changes. If the GATE input remains open, the module operates as a regular OR gate.
Read more
MRP:$31.37 SAVE 17%
coming soon $26.13
FORTHCOMING
Sensel Travel Case For Morph MIDI Controller (light gray)
Cat: 785478 Rel: 22 Oct 20
 
Travel case
Notes: Stay organized and mobile while protecting your gear.

The Morph travel case is a convenient way to carry and protect your Morph, overlays, cables, iPad, paintbrushes and any other accessories that you use along with your Morph. Fits a Morph, iPad and 5+ overlays with ease.

Contains:
A padded exterior to protect your Morph from bumps and bruises
An interior sleeve to securely hold your Morph (and iPad)
Interior straps to hold cables, paintbrushes, drumsticks
An external zippered pocket for additional storage.

Specs:
Weight: 0.7 lbs | 319 g
Dimensions: 11 x 8 x 1.4 in | 28 x 20 x 3.4 cm
Read more
MRP:$31.37 SAVE 17%
coming soon $26.13
FORTHCOMING
Sensel Travel Case For Morph MIDI Controller (blue)
Cat: 785475 Rel: 22 Oct 20
 
Travel case
Notes: Stay organized and mobile while protecting your gear.

The Morph travel case is a convenient way to carry and protect your Morph, overlays, cables, iPad, paintbrushes and any other accessories that you use along with your Morph. Fits a Morph, iPad and 5+ overlays with ease.

Contains:
A padded exterior to protect your Morph from bumps and bruises
An interior sleeve to securely hold your Morph (and iPad)
Interior straps to hold cables, paintbrushes, drumsticks
An external zippered pocket for additional storage.

Specs:
Weight: 0.7 lbs | 319 g
Dimensions: 11 x 8 x 1.4 in | 28 x 20 x 3.4 cm
Read more
MRP:$31.37 SAVE 17%
coming soon $26.13
FORTHCOMING
Sensel Travel Case For Morph MIDI controller (pink)
Cat: 785476 Rel: 22 Oct 20
 
Travel case
Notes: Stay organized and mobile while protecting your gear.

The Morph travel case is a convenient way to carry and protect your Morph, overlays, cables, iPad, paintbrushes and any other accessories that you use along with your Morph. Fits a Morph, iPad and 5+ overlays with ease.

Contains:
A padded exterior to protect your Morph from bumps and bruises
An interior sleeve to securely hold your Morph (and iPad)
Interior straps to hold cables, paintbrushes, drumsticks
An external zippered pocket for additional storage.

Specs:
Weight: 0.7 lbs | 319 g
Dimensions: 11 x 8 x 1.4 in | 28 x 20 x 3.4 cm
Read more
MRP:$31.37 SAVE 17%
coming soon $26.13
FORTHCOMING
SynthRotek MIX Mixer Module (black faceplate) (fully assembled)
Notes: This simple passive mixer is suitable for mixing both audio and control voltage sources. Three channel inputs mix down to one output.

It is not suitable for additive voltage applications. All the jacks are switched to ground to minimize external interference when not patched. This can lead to unwanted attenuation of the output signal unless you plug a dummy cable into the unused channel(s) or, even easier, you can turn the channel's pot completely CCW.

Specifications:
Width: 2HP
Power consumption: none
Module screws included
Read more
MRP:$31.37 SAVE 14%
coming soon $26.97
FORTHCOMING
Tangible Waves AE Modular 1-Row 12x1 Narrow Case
Cat: 786529 Rel: 31 Oct 20
 
1-row 12x1 narrow case
Notes: This 1-row rack for AE modular is 12 units wide; two of them are used by the MASTER module so you have 14U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

If you want your rack pre-installed by us, please add the mounting service to your order (module mounting (up to 16 modules) ).

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions:31.1 x 11.2 x 4.5 cm (width x depth x height)
Read more
MRP:$32.68 SAVE 17%
coming soon $27.23
FORTHCOMING
Teenage Engineering OP-Z Grip Knob Kit
Cat: 784902 Rel: 16 Oct 20
 
Knob kit
Notes: Additional grip knobs for the OP-Z
Read more
MRP:$32.68 SAVE 17%
coming soon $27.23
FORTHCOMING
Rode DC-USB1 Power Cable For Rodecaster Pro Podcast Production Console
Cat: 781267 Rel: 19 Sep 20
 
Power cable
Notes: The DC-USB1 is a power cable that allows the RODECaster Pro to be powered from any compatible USB output, making it entirely portable. It features a locking connector for added security. A high-power (2.4A minimum) USB output is required for operation.

*USB device/power bank not included.

Power Requirements:
5V/2.4A (USB)

12V/1A (DC)
Read more
MRP:$32.68 SAVE 17%
coming soon $27.23
FORTHCOMING
SynthRotek TST Module (black faceplate) (fully assembled)
Cat: 778316
 
test kit module
Notes: Test your modules safely without reaching into your case! The TST has two keyed 16-pin headers on the front of the module so you can plug and unplug quickly and easily. Two 16-pin plugs are included to shield the power pins when the module is not in use. It also has LEDs to indicate the power status on each rail.

Please note: Use this module at your own risk. You will be exposing electricity to the front of your modular system. Be careful not to dangle patch-cables, etc. on the exposed pins. This may damage modules and your power supply. Be smart and safe!

Features and Specifications:
Two 16-pin connectors and plugs on the front side of the module
LED indicator for each rail
Module width: 3HP
Module depth: 5mm
Current draw:
+12V: 1mA
-12V: 1mA
+5V: 1mA
Includes keyed power cable, 2.5mm and 3mm screws
Read more
MRP:$35.29 SAVE 16%
coming soon $29.69
FORTHCOMING
Tangible Waves AE Modular 1-Row 16x1 Standard Case
Cat: 786523 Rel: 31 Oct 20
MRP:$36.60 SAVE 17%
coming soon $30.50
FORTHCOMING
Tangible Waves AE Modular SLEW/EDGE CV Slew Limiter & Edge Detector Module
Cat: 786504 Rel: 31 Oct 20
 
VC slew limiter & edge detector module
Notes: A slew limiter / edge detector for CV's.

The SLEW/EDGE module has two purposes:

First, it is a slew limiter, changes in the incoming CV are softened with a variable slew time. If the CV is used e.g. for controlling an oscillator, you get a portamento. With two switches it can be controlled if only rising or falling CVs or CV change in both directions are processed with the slew time. Additionally, the choice if rising and/or falling CVs are "slewed" can be controlled with external gate signals.

The second purpose of the module is an edge detector that indicates if the incoming CV is rising or falling; this information is available as different outputs (one that is high on rising and low on falling input, and short pulses on rise / fall / any change.

The SLEW/EDGE module combines the function of a slew limiter for CVs and a CV change detector in one module. The slew operation can be activated individually for rising and/or falling CVs, either by switches or controlled by external gate signals. The edge detection generates various gate / trigger output signals depending on rising or falling of the input CV.

Module power consumption: 5 mA

The second purpose of the module is an edge detector that indicates if the incoming CV is rising or falling; this information is available as different outputs (one that is high on rising and low on falling input, and short pulses on rise / fall / any change.

The Slew detector can be useful if using the S&H module for modulation; rather than jumps it will smooth the changes between the different levels, particularly good on filter modulation, unless you want the sudden changes.
Read more
MRP:$37.91 SAVE 17%
coming soon $31.58
FORTHCOMING
Nux NMP-2 Dual Foot Controller
NUX
Cat: 784822 Rel: 15 Oct 20
 
Dual foot controller
Notes: Dual foot switch controller for on-the-fly control of guitar effects and amplifiers. Dual mono or stereo jack compatible with individual latching/momentary options for each switch. Designed for use with NuX pedals and compatible with many other types of equipment.

LED indicator per pedal
Latching or non-latching selectable
Compatible with NUX Loop Core Deluxe, JTC Drum & Loop PRO and Cerberus

The box for this item contains :

NuX NMP-2 dual foot controller

Power supply: 9Vdc (5.5 x 2.1mm, centre-negative) optional for LEDs
Dimensions: 96 x 50 x 46mm
Weight: 200g
Read more
MRP:$45.75 SAVE 31%
coming soon $31.58
FORTHCOMING
Eurorack Hardware Modules OR Dual Eurorack Combiner Module (black faceplate) (fully assembled)
Notes: The OR is a passive dual OR Combiner module in 2HP for Eurorack. Two channels of three inputs to one output. Matte black panel with white graphics. Perfect for adding gates or trigger signals together as each input is diode protected. Passive, no current draw.
Read more
MRP:$37.91 SAVE 17%
coming soon $31.58
FORTHCOMING
Tangible Waves AE Modular POLAMIX 3 Channel Attenuverter & Mixer Module
Cat: 786486 Rel: 31 Oct 20
 
Attenuverter/mixer module
Notes: POLAMIX - a 3-channel atenuverter/mixer

The POLAMIX is similar to the 2CVTOOL in that you can offset and -/+ attenuate CV signals, but it also acts as a 3 channel mixer. Try to use this with 3 LFOs for modulation mayhem!

The three inputs are routed to corresponding knobs, where the center position means a level of zero. Turning the level knob to the right increases the level of the input signal; turning it to the left, the level is also increased, but inverted. E.G. when feeding a sawtooth signal to the input, you can get either a rising or falling signal at the output. And this for each of the three inputs. Finally, with the offset knob, the total level can be shifted up or down.

Read more
MRP:$40.52 SAVE 17%
coming soon $33.66
FORTHCOMING
Tangible Waves AE Modular 2CVTOOL CV Dual Attenuverter Module
Cat: 786470 Rel: 31 Oct 20
 
Dual attenuverter module
Notes: A dual attenuverter for CVs.

The 2CVTOOL offers two units for offset and -/+ attenuation for CV signals, also known as "attenuverter". This can be useful for shaping and tuning all kinds of modulation signals.

The inputs goes to the level knob, where the center position means a level of zero. Turning the level knob to the right increases the level of the input signal; turning it to the left, the level is also increased, but inverted. E.g. when feeding a sawtooth signal to the input, you can get either a rising or falling signal at the output. With the offset knob, the total level can be shifted up or down, with the clipping at the upper and lower ends an additional modfication of the signal is possible.

The 2CVTOOL offers two units for offset and -/+ attenuation for CV signals, also known as "attenuverter". This can be useful for all kinds of modulation purposes.

Module power consumption: 2 mA

Inputs
IN 1 - accept any CV or audio signal
IN 2 - accept any CV or audio signal
Outputs
Bus CV - CV signal from MIDI
Bus CTRL - CTRL signal from MIDI
OUT 1 (x2) - attenuated signal from IN1
OUT 2 (x2) - attenuated signal from IN2
MULT - passive multiple, not connected to the module's circuitry
Controls
OFFSET 1 - Potentiometer to dial in the offset voltage for channel 1. This will be added to the incoming CV.
LEVEL 1 - Potentiometer to select the attenuation. This is a bipolar control in that it can reduce the incoming voltage or increase it.
OFFSET 2 - Potentiometer to dial in the offset voltage for channel 2. This will be added to the incoming CV.
LEVEL 2 - Potentiometer to select the attenuation. This is a bipolar control in that it can reduce the incoming voltage or increase it.
Read more
MRP:$40.52 SAVE 17%
coming soon $33.77
FORTHCOMING
Behringer 994 Multiples Module
Cat: 772832
 
multiples module
Notes: Enter the Behringer 994 MULTIPLES Module. An authentic reproduction of the circuitry from the Modular 55 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The dual 4-socket multiples of the 994 MUTLIPLES allows you to split CV or audio signals to multiple destinations. Now, one signal can control several modules.

Installing the 994 MULTIPLES is simple as it was designed to fit into a standard Eurorack case. This allows for the 994 MULTIPLES to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $34.85
FORTHCOMING
Tangible Waves AE Modular 2-Row 12x2 Narrow Case
Cat: 786519 Rel: 31 Oct 20
MRP:$41.83 SAVE 17%
coming soon $34.85
FORTHCOMING
Tangible Waves AE Modular 1-Row 20x1 Wide Case
Cat: 786525 Rel: 31 Oct 20
MRP:$43.14 SAVE 17%
coming soon $35.93
Artículos del 1 al 50 de 601 en la página 1 de 13
1  2  3  ...  13  »

Filter

Coming Soon: Studio Equipment
Close