100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

Inicio  Coming Soon  

Studio Equipment

Options
Artículos del 1 al 15 de 15 en la página 1 de 1
FORTHCOMING
Tesseract Modular Sweet Sixteen Mk2 Module
Tesseract Modular Sweet Sixteen Mk2 Module (attenuater / controller / MIDI synth module)
Cat: 797258 Rel: 31 Jan 21
 
Synth module
Notes: This module is a eurorack version of the 16n Faderbank, implemented with 16 CV inputs and some other smart add ons. Almost everything is in the front panel.

This new version is oriented for firmware tweaks and future expansions, still being fully compatible with the 16n and the previous Sweet Sixteen.

Changes from previous versions:

Function push button
Function led
Expansion header in the back
i2C pull-up switchable with jumpers (aux pcb not required)
Mate black & gold panel with brass nuts

There are 16 channels, which can be used as:
Midi controller
Manual CV generator (0 to 8v range)
Attenuator
CV to Midi CC
i2C controller
CV to i2C data

The Midi CC number and channels can be different for the TRS jack and the USB port. The firmware has been tweaked to allow also Pitch Bend, which is pretty handy because you can get much better resolution through Midi (from min to max values Midi CCs have 128 steps and Pitch Bend has a resolution of 16.384 steps).

The voltage generated by every fader is up to 8v, which is good enough to control eurorack modules (like wide open/close the cutoff frequency of a filter etc).

In the midi CC messages, 0 volts will correspond to a value of 0, and 8 volts to a value of 127. But the CV to Midi can handle also negative voltages, for such task there are 4 slide switches (1 for every 4 faders) that swaps the internal voltage reference in a way that, when activated, 0 volts will be the middle position of the midi controller, -4 volts the minimum value and +4 volts the maximum. Those switches only affect the Midi/i2C outs, CV outs won't be affected by them in any way.

If you plug in a bigger voltage source (like a -5v+5v LFO or a 10v envelope) the fader will work as attenuator, so you'll be able to adapt how that signal affects the Midi CC out, covering the whole Midi CC range, saturating the waveform or just affecting it briefly.

Panel USB port is type B, which seems to be stronger than mini or micro ones.

i2C could connect directly to an ER-301, monome Ansible or a monome Teletype.

The Teensy can be powered via the internal regulator or the +5v eurorack rail (selectable via a switch on the back).

The partial kit comes with all SMD populated, so only through hole components requires soldering work.

size: 24 HP

92 mA +12V

86 mA -12V
Read more
MRP:$202.37 SAVE 17%
coming soon $168.64
FORTHCOMING
Tesseract Modular Tex Mix Master Section Expandable Mixer Module
Cat: 797281 Rel: 31 Jan 21
 
Synth module
Notes: This is the main module of the mixer and the only indispensable one, the only one that needs the eurorack power cable. It provides power to all the other modules and contains the summing circuit for all channels in every audio bus.

32 mA +12V
32 mA -12V
Read more
MRP:$83.88 SAVE 17%
coming soon $69.89
FORTHCOMING
Tesseract Modular Step Fader Dual Sequencer Module
Tesseract Modular Step Fader Dual Sequencer Module (sequencer / slew limiter / CV modulation / dual & stereo synth module)
Cat: 797267 Rel: 31 Jan 21
 
Synth module
Notes: This is a dual sequencer, nothing really new but fun to play with. Oriented to facilitate the interaction of both sequencers in order to get more complex patterns and polyrhythms. Very "hands on" CV source & good complement for more complex digital sequencers like Eloquencer, Performer etc.

There are 3 GLOBAL STYLES:
DUAL (2 totally independent 8 step sequencers)
PARALLEL (one sequencer with 2 rows of CV and 8 steps)
SINGLE (one sequencer with 16 steps)
There are also those PLAY MODES:
Normal
Reverse
Pendulum
Random

There are 2 dedicated buttons (and trigger inputs) to change the sequencer behaviour, pressing 1 button will cycle between the play modes, pressing 2 buttons will do it within the global styles.

Each sequencer has:
8 faders & 8 switches (1 per step)
1 master fader
1 switch for manual step & reset
clock, reset and mode inputs
2 gate outs (activated with the switches, center position is no gate)
1 cv out (0 +8 volts range, unquantized)

There is also an output which is the sum of the 2 CVs of both sequencers and 2 gate outs which are a combination of both sequencer gate lines, pretty handy if it's being used as a 16 steps single sequencer but also interesting when used in dual style.

8 position rotary switch to control the number of steps of the second sequencer, but also other switch allows to send that "reset" signal to the first sequencer instead of the second one, useful for the single 16 step style or to make both sequencers interact.

It has 2 slew limiter circuits with input and output, so they can be used independently, by default processing the CV out of each sequencer, forcing the slew to the max will give as result like a weird-synched LFO, but also the gate outs could be plugged in to get like rudimentary envelopes.

The first sequencer has CV control over step repetition, there's a switch to select the CV IN or the second sequencer as source for such purpose (the master fader has no effect over this, so the 8 lines of the faders correspond to the step repetition, from 1 clock per step to 8) Than means that when used in parallel style the lower row of faders could control the step duration, Metropolis or System 100m style.

Two jumper in the back of the module allows to use the "mode 2" input as reversed CV sum output, giving a total of 6 CV and 6 GATE outs.

26 HP
53 mA +12V
14 mA -12V
Read more
MRP:$214.36 SAVE 17%
coming soon $178.62
FORTHCOMING
Tesseract Modular Tex Mix 4 Stereo Channels Expandable Mixer Module
Cat: 797287 Rel: 31 Jan 21
 
Synth module
Notes: This is a 4 stereo channels expansion. Several of this modules can be added to get more stereo channels. Every channel features:
Stereo input (L works as mono in)
SEND A control (switchable PRE/POST, in PRE mode the signal is present regardless to the ON/OFF/CUE switch position and channel volume control)
SEND B control (post-fader)
PAN control (only affects the master bus)
VOLUME control (affects the master, cue and POST sends)
ON/OFF/CUE switch: ON- channel is routed to the master bus
OFF- channel is muted
CUE- channel is routed to the cue bus

15 mA +12V
15 mA -12V
Read more
MRP:$95.86 SAVE 17%
coming soon $79.87
FORTHCOMING
Tesseract Modular Tex Mix 4 Mono Channels Expandable Mixer Module
Cat: 797284 Rel: 31 Jan 21
 
Synth module
Notes: This is a 4 mono channels expansion. Several of these modules can be added to provide more channels. Every channel features:
- Mono input
- Vactrol Gate (plug a CV into the GATE IN to modulate the volume of a channel, just like a classic VCA. When nothing is plugged in the GATE IN, the gate is normalled to fully open)
-SEND A control (switchable PRE/POST, in PRE mode the signal is present regardless to the channel volume control but only if the channel switch is in ON position)
-SEND B control (post-fader)
-PAN control (only affects the master bus)
-VOLUME control (affects the master, cue and POST sends, does not affect PRE-fader send)
-ON/OFF/CUE switch: ON - channel is routed to the master bus
OFF - channel is muted
CUE - channel is routed to the cue bus

13 mA +12V
8 mA -12V
Read more
MRP:$95.86 SAVE 17%
coming soon $79.87
FORTHCOMING
Tesseract Modular Radioactive Analogue Modelling Digital Oscillator Module
Tesseract Modular Radioactive Analogue Modelling Digital Oscillator Module (digital / oscillator / waveshaper synth module)
Cat: 797271 Rel: 31 Jan 21
 
Synth module
Notes: Analog modelling digital oscillator with phase offset modulation

Radioactive is a small but powerful 14-bit analog modelling voltage-controlled digital sound source: a complete voice Eurorack module in 6HP. It consists of 3 simultaneous independent oscillators, voltage-controlled AR/ASR transient generator, voltage-controlled pitch slew (glide) and voltage-controlled waveshaper with 5 different modes, but that's just the beginning. Its forte consists of selectable gate/trigger/constant envelope timing signals, rather unique 3-voice polyphonic mode, semitone-quantized mode, voltage-controlled waveform selection, on-the-fly selectable 10Vpp CV input range with offset (except for Pitch), a few experimental features, and then some.

Under the hood, it's a chiptune-inspired wavetable-gnawing sound cruncher with a mind of it's own, and oh boy it's dirty. It could be described as raw and untamed, but it would probably be an understatement.

Operation:
V/Oct Pitch input with attenuator
3 CV inputs with offset (Glide/Attack, Release, Shaper)
Trig/Gate input for envelope triggering/gating
Wave change trigger input
Single button with 3 different functions: waveform change with short press, shift function (alternate control parameter) with long press, enter setup mode on power-up.
3 green illuminated indicators of selected waveform and their combinations, also providing information in setup mode
Single red illuminated indicator of incoming trigger or high/low gate signal
Simple and intuitive setup without menu diving (parameters are saved and recalled at start-up)
3 different operation modes (A, B & C) selectable in setup:
A - Free range oscillator with Attack and Release envelope
B - Free range oscillator with Release envelope and Glide
C - Quantized oscillator with Release envelope and Glide
3 different envelope activation modes (G, T & P) selectable in setup:
G - Gate mode, monophonic
T - Trigger mode, monophonic
P - Poly mode, 3-voice polyphonic
5 different wave shaper modes selectable in setup and at runtime
9 basic waveforms and 12 different combinations

Specifications:
VCDO sound source with thousands of possible waveform shapes
All inputs: 100k impedance, 512Hz DC rate
32kHz refresh rate
14-bit sound generation
10-bit CV capture
V/oct input range: 0 to +5V (C1-C6 with octave shift control to cover the entire C0-C8 range)
CV input range: on-the-fly selectable 0 to 10V, -5 to +5V or any other 10Vpp range between -10 and +10V
Trig/Gate input range: 0 to +10V (0V closed, 3V+ open), protected
Output levels: -5V to +5V (10Vpp), envelope/shaper mode dependable
Professionally designed front panel with all linked functions clearly labeled in different colours
Comprehensive User guide covering all operation modes and extensive Build guide for DIYers

42 mA +12V
10 mA -12V
0 mA 5V
25 mm deep
Read more
MRP:$102.52 SAVE 17%
coming soon $85.42
FORTHCOMING
Tesseract Modular 12x12 Buffered Matrix Module
Tesseract Modular 12x12 Buffered Matrix Module (multiple / utility synth module)
Cat: 797270 Rel: 31 Jan 21
 
Synth module
Notes: This module is a 12 ins and 12 outs precision buffered matrix.

Is conceived to be a semi-permanent matrix for medium to big systems, with white silkscreen labels to customize ins and outs names.

Every output has a rotary switch to select an input. You can make the same input go through several outputs but not several inputs go to the same output.

There's also a bicolor led next to every output for visual info of the signal that is going through it.

Allows fast patch changes and easy rerouting signals, both audio and cv.

Can be used as a traditional buffered multiple, pretty flexible one: 1 x 12 outs, 2 x 6 outs, 3 x 4 outs etc.

26 HP
45 mA +12V
45 mA -12V
Read more
MRP:$238.32 SAVE 17%
coming soon $198.59
FORTHCOMING
Tesseract Modular 8x8 Buffered Matrix Module
Tesseract Modular 8x8 Buffered Matrix Module (multiple / switch / utility synth module)
Cat: 797244 Rel: 31 Jan 21
 
Synth module
Notes: This module is a 8 ins and 8 outs precision buffered matrix.

Every output has a rotary switch to select an input. You can make the same input go through several outputs but not several inputs go to the same output.

There's also a bicolor led next to every switch for visual info of the signal that is going thru it.

Allows fast patch changes and easy rerouting signals, both audio and cv.

Can be used as a traditional buffered multiple, pretty flexible one: 1 x 8 outs, 2 x 4 outs, 4 x 2 outs or any other combination.

62 mA +12V
65 mA -12V
Read more
MRP:$113.17 SAVE 17%
coming soon $94.30
FORTHCOMING
Tesseract Modular FranKinksTides 1.2 Dual Tidal Modulator Module
Tesseract Modular FranKinksTides 1.2 Dual Tidal Modulator Module (envelope generator / function generator / LFO / oscillator / digital / dual & stereo synth module)
Cat: 797277 Rel: 31 Jan 21
 
Synth module
Notes: Dual tidal modulator with max, min & mix outs

FranKinksTides is a 18hp dual Tides (based on the Swirls pcb layout) with the max/min circuit from Kinks and some switches for sync, quadrature, pll and fm operation . It can be a double/complex oscillator, a dual function generator or any combination of oscillator, Lfo and Envelope generator with lots of cv control plus some interesting cross-modulation and sync features.

Some improvements in version 1.2:

-Mix output is now buffered, no signal bleeding on single outs.
-Mix pot controls also the balance of the signals sent to the max/min circuit.
-Uni/bi switch now also determines the signal sent to FM1.
-Clock/sync switch has now a center OFF position, no need of plugging a dummy cable in the Clock1 when using Sheeps firmware to avoid ultra fast sound bank changes.
small improvements for DIY:
-Bigger font size on the pcb.
-Parts renumbered for easy DIY.

Original design by Emilie Gillet
Available assembled and DIY (pcb+panel)
+12v
-12v
Read more
MRP:$262.29 SAVE 17%
coming soon $218.56
FORTHCOMING
Tesseract Modular Selecta 8-Channel OR Combiner & A/B Switch Module
Cat: 797261 Rel: 31 Jan 21
 
Synth module
Notes: This module has 4 channels of OR Combiner and 4 channels of A/B Switch.

This new version has a reversible panel, so the switches can be placed on the left or the right side.

The OR Combiner is conceived to select or sum trigger and/or gate signals, each channel has 2 inputs (A & B) and one output. A switch select which signal would be present at output, being the middle position of the switch the sum of both. It could be used with other type of signals but only the positive part of these would be present at the output stage (with a small lack of voltage because of the diodes and the pulldown resistor), so it could work with envelopes for example. With bipolar voltages the OR COMBINER channels will work as a Half-wave rectified output (the negative half of the signal is clipped to 0V) This can add many harmonics to audio signals, the combination of 2 oscillators will give as result a sort of 'ring modulator' sound.

The A/B Switch selects between A and B and the middle position of the switch is a "mute", works with any kind of signal (cv or audio) and is bidirectional. Can be used with 2 input signals and 1 output or 1 input signal and 2 outputs.

The circuit of the first version has been re-designed to avoid the bleeding among other issues.

This module does not draw any power.

Read more
MRP:$66.57 SAVE 17%
coming soon $55.47
FORTHCOMING
Tesseract Modular VC Logics Dual Logic Gates Module
Tesseract Modular VC Logics Dual Logic Gates Module (dual & stereo / logic synth module)
Cat: 797265 Rel: 31 Jan 21
 
Synth module
Notes: 2 x Logic gates with voltage controlled boolean function selection.

Logic gates are used in order to combine GATE signals to conditional event. For example it can be used to combine the GATE signals from various sequencers to get different patterns.

The module has 2 logic processors, the boolean function can be selected with the potentiometer, the CV input or the push button. The CV input range is 0 to 8V, but the potentiometer will work as an offset, so for example, placing the pot in the center position will allow the use of bipolar i4v CV sources like LFOs etc. The input is protected so voltages over 8v will be trimmed out.

Each processor can work in 2 modes:

-Free: when the boolean function changes the output changes according to the inputs & logic type.

-Quantized: when the boolean function changes the output won't change until there is a change in any of the inputs, that way you won't get out of time beats when using the module for percussions with and LFO in the CV input ...for example.

To change the mode long press the button (1 second) if the mode you've just entered is the 'free' one you'll see a pattern on the leds.

CV input 1 can be set to be a trigger input with a jumper in the back of the module, to work just like the push button, so any incoming trigger will jump to the next boolean function, those functions are:

AND
OR
XOR
NAND
NOR
XNOR

42 mA +12V
10 mA -12V

4 HP
Read more
MRP:$71.90 SAVE 17%
coming soon $59.90
FORTHCOMING
Tesseract Modular GESS Gate Expander For Sweet Sixteen Mk2 Module
Cat: 797249 Rel: 31 Jan 21
 
Synth module
Notes: Gate Expander for Sweet Sixteen mkII.

This is an expander, brings 8 gate inputs for the Sweet Sixteen mkII.

The panel is reversible, so jacks & buttons can be in the left or right side.

The orientation of the 10 pin ribbon cable is marked by the 'do not plug power here!' legend on the PCB, so it could be with the red stripe facing that in both GESS and Sweet Sixteen mkII modules.
Read more
coming soon $22.18
FORTHCOMING
Tesseract Modular Blinks VU Meter Module
Cat: 797275 Rel: 31 Jan 21
 
Synth module
Notes: VU meter for eurorack.

BLINKS is a VU meter for eurorack with 24 RGB leds per channel, function is pretty easy, it has 2 inputs, one for each led column (no output).

PATT button changes the led pattern ( 6 patterns to choose ).

SENS button changes the input sensitivity, cycling in 7 steps.

Long pressing the PATT button enters the color scheme selection.

Long pressing SENS button enters the brightness adjustment. Most probably you'll prefer the lowest setting.

The module has a 5v regulator in case you don't have 5v in you eurorack PSU. A jumper in the back select if the led board would be powered by the 5v rail or the internal regulator (which works with the +12v rail)

Up to 3 stereo signals can be connected to a buffered input using the rear headers.

Easy DIY with only a few components, the led board is already assembled.

5v not indispensable
+5v: 30 mA (on lowest brightness)
+12v: 4mA (or ~40mA if 5v rail is not used)
Read more
MRP:$59.91 SAVE 17%
coming soon $49.91
FORTHCOMING
Tesseract Modular Nutella Tsunami Conversion Module
Tesseract Modular Nutella Tsunami Conversion Module (drum / MIDI / sampling synth module)
Cat: 797279 Rel: 31 Jan 21
 
Synth module
Notes: Nutella is a eurorack conversion module for the Sparkfun Tsunami Super Wav Trigger.

30 mA +12V
15 mA -12V
200 mA 5V
Read more
MRP:$155.77 SAVE 17%
coming soon $129.80
FORTHCOMING
Tesseract Modular Douts Direct Outs Module For Tex Mix
Cat: 800365 Rel: 28 Feb 21
 
Mixer/multiple/utility synth module
Notes: Direct Outs for TexMix & 3,5mm to 6,3mm converter.

This is a breakout box for the direct outs of the TexMix. Each module has 8 outputs so it could have 2 '4MonoChannels' connected or 1 '4StereoChannels'.

Without connecting the ribbon cable it's a 3,5/6,3 adapter.

The orientation of the 8 pin ribbon cable is marked by the 'DIRECT OUTS ' legend on the PCB of the channel expanders (mono or stereo) and a white line in the DOUTS input header.
Read more
MRP:$34.62 SAVE 17%
coming soon $28.84
Artículos del 1 al 15 de 15 en la página 1 de 1

Filter

Coming Soon: Studio Equipment
Close