100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

Inicio  Coming Soon  

Studio Equipment

Options
Artículos del 1 al 25 de 25 en la página 1 de 1
FORTHCOMING
Behringer TD3 AM Analogue Bass Line Synthesiser (yellow)
Cat: 772986
 
bass line synthesiser
Notes: Only produced from 1981 to 1984, the Roland TB-303 was a tremendous commercial flop as a replacement for the bass guitar, however it soon found its place as one of the most-loved synthesizers for what became known as Electronic Dance Music (EDM). An ultra-affordable and faithful homage to the iconic synthesizer that spawned house music, plus an all-new Distortion circuit, the TD-3-AM lets you conjure up virtually any sound with incredible finesse and ease. With its pure analog signal path, 16-step Sequencer and authentic VCO, VCF and VCA filters, the TD-3-AM is sure to become one of your favorite synthesizers.

Great care has been taken in engineering the TD-3-AM, including the true to the original VCO, VCF and VCA designs and pure analog circuitry with matched transistors. This highly-focused attention to detail is what gives TD-3-AM its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects - all the way out to the otherworldly sounds of your imagination.

Your TD-3-AM comes ready to rock, thanks to its default signal routing that doesn't require lifting a single patch cable to instantly create amazing sounds. The highly-intuitive layout lets you easily tap into the inspired sounds of 1980s and '90s progressive rock, wave, EDM and synth-pop music tracks that made rock and roll history - or to design incredibly fat and original sounds that will make you a legend in your own right.

The very heart of TD-3-AM's sound is its versatile 24 dB/octave filter, which lets you freely experiment with the low-pass Cutoff frequency and Resonance settings to dial in the perfect sound.

TD-3-AM's authentic Voltage Controlled Oscillator (VCO) with transistor wave-shaping circuitry is ultra-easy to use and provides your choice of reverse-sawtooth or pulse waveforms for the ultimate in sound creation.

The onboard sequencer with 7 tracks allows you to program up to 16 steps of notes and rests and save them as a Pattern. You can record, save and recall up to 250 patterns, all of which can be stored in the 4 Groups. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode which allows you to interact while composing a pattern.

When you want to add even more power to your performance, just flip the Distortion On/Off switch and dial in the perfect amount of Drive to push the envelope to the max.

While it is a monophonic instrument (one note at a time), TD-3-AM's 16-note Poly Chain function lets you combine multiple synthesizers for up to 16-voice polyphony - plus provides vastly improved reliability and stability over its 1970s and '80s predecessors.

TD-3-AM has 11 controls and 28 switches to give you direct and real-time access to all important parameters, all laid out in a highly-intuitive format that puts the joy back into your music creation. And you can expand TD-3-AM's tone-sculpting capabilities beyond your wildest dreams by utilizing the multi-I/O patchbay to connect external devices.
Read more
coming soon $114.18
FORTHCOMING
Behringer TD 3 BK Analogue Bass Line Synthesiser (black)
Cat: 773200
 
line synthesiser
Notes: Only produced from 1981 to 1984, the Roland TB-303 was a tremendous commercial flop as a replacement for the bass guitar, however it soon found its place as one of the most-loved synthesizers for what became known as Electronic Dance Music (EDM). An ultra-affordable and faithful homage to the iconic synthesizer that spawned house music, plus an all-new Distortion circuit, the TD-3-BK lets you conjure up virtually any sound with incredible finesse and ease. With its pure analog signal path, 16-step Sequencer and authentic VCO, VCF and VCA filters, the TD-3-BK is sure to become one of your favorite synthesizers.

Great care has been taken in engineering the TD-3-BK, including the true to the original VCO, VCF and VCA designs and pure analog circuitry with matched transistors. This highly-focused attention to detail is what gives TD-3-BK its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects - all the way out to the otherworldly sounds of your imagination.

Your TD-3-BK comes ready to rock, thanks to its default signal routing that doesn't require lifting a single patch cable to instantly create amazing sounds. The highly-intuitive layout lets you easily tap into the inspired sounds of 1980s and '90s progressive rock, wave, EDM and synth-pop music tracks that made rock and roll history - or to design incredibly fat and original sounds that will make you a legend in your own right.

The very heart of TD-3-BK's sound is its versatile 24 dB/octave filter, which lets you freely experiment with the low-pass Cutoff frequency and Resonance settings to dial in the perfect sound.

TD-3-BK's authentic Voltage Controlled Oscillator (VCO) with transistor wave-shaping circuitry is ultra-easy to use and provides your choice of reverse-sawtooth or pulse waveforms for the ultimate in sound creation.

The onboard sequencer with 7 tracks allows you to program up to 16 steps of notes and rests and save them as a Pattern. You can record, save and recall up to 250 patterns, all of which can be stored in the 4 Groups. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode which allows you to interact while composing a pattern.

When you want to add even more power to your performance, just flip the Distortion On/Off switch and dial in the perfect amount of Drive to push the envelope to the max.

While it is a monophonic instrument (one note at a time), TD-3-BK's 16-note Poly Chain function lets you combine multiple synthesizers for up to 16-voice polyphony - plus provides vastly improved reliability and stability over its 1970s and '80s predecessors.

TD-3-BK has 11 controls and 28 switches to give you direct and real-time access to all important parameters, all laid out in a highly-intuitive format that puts the joy back into your music creation. And you can expand TD-3-BK's tone-sculpting capabilities beyond your wildest dreams by utilizing the multi-I/O patchbay to connect external devices.
Read more
coming soon $108.75
FORTHCOMING
LEP Leploop Sequencer & Drum Machine Analogue Synthesiser
LEP Leploop Sequencer & Drum Machine Analogue Synthesiser (sequencer & drum machine synthesiser)
Cat: 770286
 
analogue synthesiser
Notes: Laboratorio Elettronico Popolare (L. E. P. ) is proud to present to you a one-of-a kind analog synthesizer, sequencer and drum-machine: LEPLOOP.

Small in nature but aggressive in sound, the user will be able to create a variety of analog timbres and beats.

LEPLOOP was designed to be a minimalist electronic music live-performance groove-box, which can be used to create a variety of electronic musical styles.

The LEPLOOP can be synched via MIDI to another LEPLOOP for tempo-synched operation or to another MIDI device or sequencer to receive sequence stop & start instructions.

1 oscillator (VCO1) triangular/square wave
1 oscillator (VCO2) sawtooth wave with ring modulator and FM modulation
White noise generator
24 dB/OCT Low pass filter
Kick drum with distorsion and trigger mixer
2 VCA's
2 AR Envelope generators
1 LFO
16 Capacitors analo sequencer PWM programmable
4 Track digital rhythm sequencer 64 step each track
4 Channel audio mixer
Midi input(clock and notes)
5 CV out: S\H, SEQ, LFO, ENV1, ENV2
3 gate out: S\H, SEQ, CASSA
3 CV in: VCO1, VCO2, VCF cutoff
1 audio in (VCF)
4 audio out: MIXER, CASSA, VCO2, VCO mix
1 clock output: clock 24, MIDI start/stop
EEPROM memory 16 banks 10 pattern each
Read more
coming soon TBA
FORTHCOMING
Sonicware Liven 8bit Warps Synthesiser & Sequencer
Cat: 762318
 
waveform memory synthesiser & sequencer
Notes: The LIVEN 8bit warps combines an 8-bit waveform memory synthesizer with a step sequencer.

Carefully selected preset waveforms and editable user waveforms along with high-quality filters and effects can be used freely to create a wide spectrum of sounds. The LIVEN 8bit warps can generate classic retro game sounds of course, but its unique 8-bit sound can also be used in a range of music genres, including EDM, hip-hop, techno and rock.

Powerful functions for live electronic music performance include 16 physical control knobs, parameter locking for each sequencer step, a looper, and SYNC IN/OUT and MIDI IN/OUT connectors to make synchronized performance with other equipment easy.

All these powerful functions are in a device that weighs only 790 g. Play it anywhere at any time.
Read more
coming soon TBA
FORTHCOMING
Black Corporation Deckard's Dream Mk2 Eight Voice Polyphonic Analogue Desktop Synthesiser
Cat: 767533 Rel: 31 Aug 20
 
desktop synthesier
Notes: Deckard's Dream MkII is an eight-voice polyphonic analog synthesizer in desktop format. It is inspired by a certain cinematic sound from the late 1970s and early 1980s.

The synth features a fully analog signal path with two independent layers per voice. Discrete waveshapers help to reproduce the oddities of the original waveforms, especially the sawtooth glitch, which is a big part of the CS-80 sound. An autotune function assures that all 16 VCOs are tracking perfectly. It even offers detune and microtuning settings for a more vintage feel. With the addition of MIDI implementation, 256 presets (which can be managed on the integrated OLED display) and an upcoming software editor provided by Spektro Audio, this vintage inspired poly synth is at home in any modern studio.

For each layer, the synth offers a VCO with square, saw and sine waveforms, discrete 12 dB HP and LP filters with separate resonance controls, an ADSR for the filter with adjustable initial and attack levels, and an ADSR dedicated to the VCA. The synth also provides velocity and aftertouch controls for filter brilliance and volume levels.

Furthermore, polyphonic aftertouch gives Deckard's Dream expression that has only been possible on a very small number of synthesizers. MPE technology (using controllers by ROLI, LinnStrument, Haken) takes this even further with the addition of polyphonic pitch bend.
The Deckard's Dream MkII delivers everything the previous version did, in a new thin and light tabletop format with woodsides or rack-ears (both included). It also brings additional controls over Sustain modes and timing.

The synth is build in Japan, Tokyo, using only high quality electronic components.
Read more
MRP:$5,936.90 SAVE 17%
coming soon $4,947.41
FORTHCOMING
Modal Electronics ARGON8X 8 Voice 61 Key Polyphonic Wavetable Keyboard Synthesiser
Cat: 763203
 
wavetable keyboard synthesier
Notes: The Argon8X features an identical sound engine and feature set, but rather than a 37-note keybed, you get 61 keys for an even more immersive playing experience. Mind-bending functionality and near-infinite tonal possibilities meets an attractive price tag; Modal have once again raised the bar in the desktop synth category.
Read more
MRP:$847.01 SAVE 17%
coming soon $705.84
FORTHCOMING
EMW 200 Desktop Synthesiser
Cat: 775814
 
desktop synthesiser
Notes: The EML-200 recreation is an old idea that has been in the works for 12 years, and several approaches and circuits have been tested during this time. The first attempt was to create a similar synth that resembles the 200 but with several different modules and circuits.

In 2011, with the growth of the EMW initiative and a few years without focusing on the project, it was embraced again, but now with no more surprises.

The raw and powerful vibration that represents the heart and the root of the analog sound, particualrly from the EML-200 and EML-300, was a key inspiration when creating the EMW-200 and EMW-300.
Read more
MRP:$2,338.74 SAVE 19%
coming soon $1,902.18
FORTHCOMING
Behringer Pro-1 Analog Synthesiser
Cat: 781519
 
analog synthesiser
Notes: The Behringer Pro-1 is a clone of the popular retro classic Sequential Circuits Pro-One which was once conceived to be a monophonic Prophet-5. Those who know and love recordings of Depeche Mode and Yazoo, will enjoy recognizing a lot of those sounds with the Pro-1.

The two assertive oscillators, each based on a CEM3340 chip, have sawtooth and square waveforms, an octave switch, fine tuning and pulse width control. Oscillator A can be synchronized to oscillator B, the second tone generator is additionally equipped with the triangle waveform and can be switched to low mode as well as decoupled from the pitch control. Both VCOs are brought together in the mixer, where the noise generator is also located, which can be replaced by an external signal. The beautiful basic sound is processed with a characterful 24dB lowpass filter, also known as Curtis VCF. It behaves similar to a Moog filter, but due to the IC CEM3320 it sounds different than the transistor cascade. The two crisp ADSR envelopes are assigned to the filter and VCA. An LFO with three waveforms is connected to the targets via the modulation bus. The special features of this instrument include the waveforms that can be activated simultaneously in both oscillators and in the LFO.

The modulations are assigned on the left side of the control panel. The filter envelope, oscillator B and the LFO, each with their own attenuator, are available in parallel as sources. These are assigned to the targets frequency oscillator A+B, pulse width oscillator A+B and cutoff directly or via the modulation wheel (or midi controller). Wild oscillator drifts, sync sounds, sirens, FM for filter and/or oscillator A as well as pulse width modulation are possible if used with care. If you turn everything up at once, it gets really wild! The modulation bus is the hottest feature of the Pro-1 next to the sound.

The ingeniously simple sequencer provides access to two patterns, each of which can be up to 40 steps long; pauses can also be programmed. The notes are played via a connected MIDI keyboard. After the input, the patterns can be transposed with the keyboard. The Arpeggiator primarily offers the playback modes Up and Up&Down, but can also be integrated into the pattern. Synchronization to other equipment is done via the analog clock input or MIDI/USB.
Read more
coming soon $342.58
FORTHCOMING
Division 6 Business Card Sequencer V2
Cat: 777968
 
business card sequencer
Notes: The Division 6 packs a lot of sequencer into a tiny package! This 16-step circuit can work as a sequencer or as a handheld keyboard.

Specifications:
Power In: 7-15VDC, tip positive through a 3.5mm jack. Find a voltage source on your synth to power it if you can! A 9V battery or AC adapter will work too.

Power supply: 7-15VDC (reverse-polarity protected!)
Power connection: 3.5mm phone jack, center-positive
Current draw: 15ma
Dimensions: 3.5" x 2" (the same as a business card!)
Read more
MRP:$108.32 SAVE 19%
coming soon $88.08
FORTHCOMING
EMW WCS-1 Wave Composition Analog Synthesizer
Cat: 775808
 
analog synthesiser
Notes: The WCS-1 is a MIDI synthesizer module that utilizes a digital oscillator followed by all discrete analog circuits in order to produce unusual and 'fat' sounds.The exclusive wave addition resource together witha dual input.

A powerful VCF and a lightning fast VCA makes for powerful sound generation capabilities- an ideal instrument for electronic music perfection.

To make use of the WCS-1, you need a MIDI controller keyboard or anthing else with a MIDI OUT port e.g. MIDI pad controllers, bass pedals, or a computer with a MIDI connection.

The WCS-1 has a 1/4" (P-10) mono jack on the back panel in order to be connected to a sound mixer, computer audio interface, or directly to an amplifier.
Read more
MRP:$369.34 SAVE 20%
coming soon $294.73
FORTHCOMING
Division 6 Business Card Synthesizer (fully assembled)
Cat: 777973
 
business card synthesiser
Notes: The Business Card Synthesizer is a tiny synth that can be connected to a Business Card Sequencer, other synth gear, or played by itself.

Headphones can be connected directly to the output of the synth, and there are plenty of knobs to play with, so you can easily make noises anywhere. Great for learning about synthesizers!

S&H Button: Enables Sample & Hold, which disables the external CV IN jack and uses LFO1 and LFO2 to determine oscillator pitch. LFO1 sets the sample rate (SHAPE is ignored for this), and LFO2 is the wave that gets sampled.

GATE Button: Manually turns on the gate so sound comes out of the synth. This control is momentary, but you can latch it on by tapping the S&H button while holding the GATE button down.

COARSE TUNE: Adjusts the pitch of the oscillator up or down in large increments

FINE TUNE: Adjusts the pitch of the oscillator up or down in fine increments

SHAPE: Changes the shape of the wave produced by the main oscillator (VCO). Turning this control fully CW gives you a triangle wave. Start turning it CCW takes you through sawtooth/ramp, then at about the 12:00 position you get a square wave. Continue turning it CCW and you get several higher duty cycle square waves
.
GLIDE: Adjusts the rate at which the pitch of the VCO takes to go between pitches (whether changed by the COARSE TUNE knob or CV IN). Fully CCW causes the pitch to react almost instantly, while fully CW makes it take its sweet time.

LFO 1 / LFO 2 SHAPE: Changes the shape of the waves produced by the low-frequency oscillators (LFOs). The shapes are similar to those of the VCO, except that the LFOs have sawtooth/ramp waves that go both up and down (since you can actually hear the difference at LFO rates).

LFO 1 / LFO 2 RATE: Controls how fast the LFOs go.

LFO -> VCO: Routes the two LFOs to control the pitch of the main oscillator. The 12:00 position is basically "off", and the LFOs have no effect on pitch. Start turning the control CCW and LFO1 starts changing the pitch of the VCO. Maximum effect is at about 10:00. Continuing to turn the control starts to bring in LFO2 as well. All the way CCW gives you full effect from both LFO1 and LFO2.

Turning the control CW from 12:00 does essentially the same thing, but brings in LFO2 first, then LFO1.

This might seem like kind of a weird control, but it gives you quite a bit of routing flexibility with one knob. You can have no pitch modulation, LFO1, LFO2, LFO1 with a little LFO2, or LFO2 with a little LFO1.

LFO -> VCA: Routes the two LFOs to control the amplitude of the oscillator. (See LFO -> VCO control description above for more information about how the control works.)

ATTACK: Controls how fast the audio amplitude fades in when the gate is triggered. CCW is fast and CW is slow.

DECAY: Controls how fast the audio amplitude fades out when the gate is released. CCW is fast and CW is slow.

VOLUME: Controls the overall volume of the signal coming from AUDIO OUT.

FILTER: Changes the cutoff frequency of an analog low-pass filter. Turn the knob fully CW and all frequencies (that you can hear) are let through. Start turning it CCW and the high frequencies start getting cut off, until the sound becomes muddy / muffled. Use in conjunction with the SHAPE control to get the tonal quality you are looking for.

Connections:
CV IN: Accepts a 1 volt/octave control voltage to control the pitch of the oscillator. It responds from about 0-5V, but voltages outside of this range won't cause damage. The CV input is quantized, so only valid (western scale) notes are played. This input is ignored when Sample & Hold is enabled.
GATE IN: A voltage greater than about 2.5V will turn on the gate and allow audio to come out the output of the synth.
AUDIO OUT: Connect to an amplifier or another synth. The jack has both the tip and ring connected, so you can even use stereo headphones and hear sound from both ears.
Power: Connect 7.5-15VDC to this 3.5mm TS jack to power the synthesizer. The tip is positive (don't worry, there's a protection diode in case you get it reversed). You can get power from a 9V battery, AC adapter, or you may even be able to find an output on your modular synthesizer that can provide enough current.

Specifications:
Power supply: 7-15VDC (reverse-polarity protected!)
Power connection: 3.5mm phone jack, center-positive
Current draw: 15ma
Dimensions: 3.5" x 2" (the same as a business card!)
Read more
MRP:$108.32 SAVE 19%
coming soon $88.08
FORTHCOMING
SynthRotek West Coast Noise System
SynthRotek West Coast Noise System (modular synthesiser system)
Cat: 778522
 
noise module
Notes: Clear a room faster than ever with the West Coast Noise System. The amount of insanity you can create from so few modules is incredible. It's analog drums, 8bit crunch and noise married to a sequencer. Be sonically devastating or intriguingly melodic.

The West Coast Noise System is powered by Synthrotek's Case Power Mini Yellow, which has the following amperage specs: +12v @1A; -12v @ 0.5A; +5v @ 1.5A

Modules:

Sequence 8
MST Noise Sample and Hold / Track and Hold
Atari Punk Console
DS-M
DIRT Filter
DLY Module
1U UniBuffer
1U Stereo Output Mixer
Read more
MRP:$1,096.28 SAVE 21%
coming soon $870.06
FORTHCOMING
EMW 300 Desktop Synthesiser
Cat: 775817
 
desktop synthesiser
Notes: The EML-300 was released as a controller or an expansion for the EML-200. It carries an aditional oscillator and have very interesting features that vastly expands the sound creation and controlling of the model 200. Although the original EML-300 has not been designed as a stand-alone instrument, it can do a pretty good job in several situations..
The good news is that our EMW-300 received an extra strenght that allows it to be a more atractive machine in many cases, thats because we implemented an automatic trigger to the Voltage Generator that turns this module on a 16-steps analog sequencer.
Read more
MRP:$1,186.34 SAVE 19%
coming soon $966.86
FORTHCOMING
Erica Synths Fusion System II Synthesiser (UK plug)
Cat: 780750 Rel: 16 Sep 20
 
Fusion synthesiser
Notes: Vacuum tube based eurorack modular synthesizer for sounds of unprecedented pressure.

Erica Synths is one of the few manufacturers that use vacuum tubes in eurorack modules, and those, who are familiar with tube-based modules, know that tubes can push the sound to extremes or turn it deep, saturated and complete.

Erica Synths have come up with three new Fusion series modules - Fusion VCF3, Fusion Modulator (already available) and Fusion VCA/Waveshaper/Ringmodulator - to create the Erica Synths Fusion System II - a modular synthesiser for sounds of unprecedented pressure, unconventional modulations and creativity-inspiring patching. A 104HP system has 63 patchpoints for extensive experiments in sound design, all analogue signal and CV path; it's a system for those, who take sound design seriously.

Fusion System II includes:

Two Fusion VCO2s - fully analogue sound source with three simultaneously available waveforms, transistor-based suboscillator and detune function - two BBD delay lines that make frequency shifter that is mixed back to the principal oscillator in order to emulate two detuned VCOs. Tube crunch - distinct tube overdrive - is added on the top of the mix.

Fusion VCF3 - resonant 24dB/oct lowpass filter of unique design that combines vacuum tubes and vactrols, providing distinct, soft filtering. For more versatility a CV recorder, that records motion of the potentiometer, is incorporated in the module, so you can design advanced modulation patterns.

Fusion Modulator - complex, all analogue CV source that consists of several blocks - two EMS Synthi functionality inspired looping envelope generators with simultaneous unipolar (0V-10V) and bipolar (-5V-+5V), VCA, Noise generator and Sample&Hold.

Fusion VCA/Waveshaper/Ringmodulator - a modulation source based on two miniature pentodes that operates as VCA, waveshaper and ringmodulator. With two CVs applied simultaneously to different stages of the VCA, audio rate modulations, using ringmodulator as a waveshaper it becomes surprisingly versatile sound shaping module.

Fusion Delay/Flanger/Vintage Ensemble - a distinct multifunctional analogue effects module that combines BBD chip based effects with an adjustable tube overdrive in the delay output and a feedback path for extra thickness of the sound.

104HP One Row Skiff case (with or without a lid)

20 patch cables
Read more
MRP:$3,053.93 SAVE 19%
coming soon $2,474.25
FORTHCOMING
Erica Synths Pico System II Modular Synthesiser
Cat: 778768 Rel: 31 Aug 20
 
modular synthesiser
Notes: Erica Synths Pico System II is the world's smallest modular synthesizer.

In its functionality this system is as good as the Pico System I, however, as there have been several additions to the Pico Series, for example, the significant Pico Voice, we decided to upgrade the Pico System to make it even more multifarious. There are two new modules in the system: the Pico Voice - a sound source, which gives quite a big timbral diversity, and the Pico Modulator, which replaces the Pico EG and the Pico VCA. That gives us a 3HP free space which we have filled with one more Pico A MIX for more handy control of the sound sources in live performances. Pico System II comes with external PSU, Pico Drum Programmer, wrench key and 20 patch cables.

Pico modules included in the system are:

SEQ - powerful 16 step sequencer with 16 pattern memory

VCO - 32 custom waves in 2 banks, great 1V/oct tracking and LFO mode

VOICE - sound source with 8 sound generation algorithms

VCF1 - Polivoks-inspired LP/BP VCF, ideal for acid-like basslines

TRIGG - 4 trigger pattern generator that also serves as a master clock for the system. Web-based pattern designer app allows user to upload own patterns

2xDRUMS - 64 sample player with 3 adjustable parameters and CV control over them. Web-based app and Pico Programmer (included) allows the user to upload their own sound samples

MULTI - buffered audio/CV/clock signal splitter

RND - sine/pulse LFO and random events (random trigger, S&H and noise) generator

MOD - lin/log ASR envelope generator and linear VCA

2xA MIX - 3 input audio mixer

DSP - stereo effects processor with 8 great sounding custom effects

OUTPUT - stereo output module with headphone amplifier


Technical specifications:
Dimensions (WxDxH): 240mmx140mmx80mm
Power supply: universal 110-240VAC - 12VDC adapter
Power consumption 500mA
Mass : 1,35 kg excluding PSU,
1,85 kg with PSU and patch cables
Read more
MRP:$1,566.12 SAVE 17%
coming soon $1,305.09
FORTHCOMING
SynthRotek MST SYSTEM 104 Modular System
SynthRotek MST SYSTEM 104 Modular System (modular synthesiser system)
Cat: 778516
 
amalog modular synthesiser
Notes: Housed in Synthrotek's 104HP Skiff Boat, the MST SYSTEM 104 is a very powerful analog polyphonic FULLY modular synthesizer.

Powered by Synthrotek's Case Power Red, the MST SYSTEM 104 has the following power specs: +12V @ 2A, -12V @ 500mA, +5V @ 1.5A

Modules:
MST Expressor
MST MIDI to CV Converter
MST MIDI to CV Expander
MST Ribbon Controller
MST '07 Buffered Multiple
MST VC LFO
MST Noise Sample and Hold / Track and Hold
MST VCO (x 3)
MST 4-Channel Audio/CV Mixer
MST Dual Envelope
MST Low Pass Filter
MST Dual VCA
VERB
MST Stereo Output Mixer
Read more
MRP:$2,881.66
coming soon $2,706.01
FORTHCOMING
SynthRotek Nano West System
SynthRotek Nano West System (modular synthesiser system)
Cat: 778520
 
modular synthesiser
Notes: PatchBox is a series of small Eurorack modular systems that are designed to accompany other standalone or computer-based audio hardware. These small curated systems are a perfect way to get started in modular without having to invest in more than you currently need. PatchBox systems are housed in Synthrotek's own Bus Cheeks and are powered via our USB power supply. PatchBox systems can be powered via a portable battery, computer USB jack or USB wall dongle.

The Nano West system is a fantastic west coast style sidecar to your Mother 32, keyboard based synth, DAW or other workstation. If you want to add the beauty of a true analog modular with the rhythmic possibilities of our Dual Low Pass Gate, then look no further. The Nano West's ADSR envelope can produce large self cycling swells or icy pinging beats and bongos. As a full mono voice, you can also control this with the Arturia KeyStep, etc. Add another voice to your Mother 32!

Modules:
VCO - Voltage Controlled Oscillator
LPG - Dual Low Pass Gate
ADSR - Envelope
RND - Random
DLY - Delay
Housed in a Bus Cheeks with a USB Power. Includes USB to USB mini cable.
Read more
MRP:$783.06 SAVE 20%
coming soon $629.70
FORTHCOMING
Teenage Engineering Limited Edition PO Ultimate Punch Pocket Operator Bundle
Cat: 784909 Rel: 16 Oct 20
 
Pocket operator bundle
Notes: Beats from the famous PO-12 rhythm, melodic 8-bit computer-gamey chiptune sounds from PO-20 arcade, plus the PO-33 K.O! with its ability to sample the whole world around you.

Read more
MRP:$298.87 SAVE 20%
coming soon $239.26
FORTHCOMING
Electrosmith Daisy Field Programable Monosynth, Drum Machine & MIDI Sequencer
Cat: 786205 Rel: 29 Oct 20
MRP:$535.09 SAVE 17%
coming soon $445.90
FORTHCOMING
SynthRotek Analog Drum Synth System
SynthRotek Analog Drum Synth System (modular synthesiser system)
Cat: 778469
 
analog drum snyth system
Notes: The Analog Drum Synth System is perfect for making the beats. The DS-M can replicate virtually any drum sound; with four, you can mimic a small drum kit, make acid beats, trance, all with the a warm analog sound. Add some crunch with the DIRT Filter and some delay with the DLY Module and ECHO, and you have yourself a perfect drum machine.

Housed in the Power Lunch. Includes a power brick.

The Analog Drum Synth is powered by Synthrotek's Case Power Mini Yellow, which has the following amperage specs: +12v @1A; -12v @ 0.5A; +5v @ 1.5A

Some great ways to use the Analog Drum System:
Plug drum pads or an electronic drum kit into the DS-M trigger inputs, it makes a live electronic set more physically dynamic.
Use a sequencer like the Arturia Beat Step Pro to trigger each DS-M. This is perfect for a solo act that needs synth drums, just set up a configuration and switch to a different instrument.

Modules:
DS-M (x 4)
DIRT Filter
DLY Module
ECHO
1U UniBuffer
1U Stereo Output Mixer
Read more
MRP:$1,472.15
coming soon $1,382.41
FORTHCOMING
SynthRotek Duo Mini System
SynthRotek Duo Mini System (modular synthesiser system)
Cat: 778505
 
series module
Notes: PatchBox is a series of small Eurorack modular systems that are designed to accompany other standalone or computer-based audio hardware. These small curated systems are a perfect way to get started in modular without having to invest in more than you currently need. PatchBox systems are housed in Synthrotek's own Bus Cheeks and are powered via a USB power supply. PatchBox systems can be powered via a portable battery, computer USB jack or USB wall dongle.

The Duo Mini is the perfect way to add two fully analog synth voices to your DAW. The Sound Study Midi to CV converter can send 2 independent gates and CVs via your DAW.Connect the SS Midi to CV directly into your computer's USB jack and away you go. You do not even need an interface! The Duo Mini includes two ADSR envelope generators, two analog VCOs, and our dual Low Pass Gate module.

Modules:
2 x VCO - Voltage Controlled Oscillator
2 x ADSR - Envelope
LPG - Dual Low Pass Gate
Sound Study MIDI 2 CV
Housed in a Bus Cheeks with a USB Power. Includes USB to USB mini cable.
Read more
MRP:$875.72 SAVE 20%
coming soon $703.66
FORTHCOMING
SynthRotek MST Mono Voice System
SynthRotek MST Mono Voice System (modular synthesiser system)
Cat: 778509
 
analog modular synthesiser
Notes: Housed in Synthrotek's Power Lunch, the MST Mono Voice System is a powerful analog monophonic FULLY modular synthesizer.

Includes a power brick.

The MST Mono Voice is powered by Synthrotek's Case Power Mini Yellow, which has the following amperage specs: +12v @1A; -12v @ 0.5A; +5v @ 1.5A

Modules:
MST MIDI to CV Converter
MST VC LFO
MST VCO
MST Dual Envelope
MST Low Pass Filter
MST Dual VCA
1U UniBuffer
1U Stereo Output Mixer
Read more
MRP:$1,566.12
coming soon $1,470.67
FORTHCOMING
SynthRotek Beat Crusher System
SynthRotek Beat Crusher System (modular synthesiser system)
Cat: 778499
 
series module
Notes: PatchBox is a series of small Eurorack modular systems that are designed to accompany other standalone or computer-based audio hardware. These small curated systems are a perfect way to get started in modular without having to invest in more than you currently need. PatchBox systems are housed in Synthrotek's own Bus Cheeks and are powered via our USB power supply. PatchBox systems can be powered via a portable battery, computer USB jack or USB wall dongle.

PatchBox 20 - Beat Crusher

The Beat Crusher system was designed to augment rhythm making devises such as drum machines, Pocket Operators, Volcas and DAWs. The DLY and Roboto are at the heart of the sound expansion and destruction. The OBEY module can 'beat detect' and send an envelope and gate (or clock) to the RND module which in turn can send well timed voltages to the DLY and Roboto. The clocks and random voltage and then be patched back into the drum machines clock input, resulting in unique and abstract beat production.

Modules:
OBEY - Envelope Follower
Roboto
Passive Mult
RND - Random
DLY - Delay
Housed in a Bus Cheeks with a USB Power. Includes USB to USB mini cable.
Read more
MRP:$689.09 SAVE 21%
coming soon $543.78
FORTHCOMING
SynthRotek Bi-Translator System
SynthRotek Bi-Translator System (modular synthesiser system)
Cat: 778501
 
series module
Notes: The Synthrotek Bi-Translator is a new mini 44HP synthesizer system available as a completely built and calibrated system or as a do-it-yourself-kit. This versatile a system lets your translate your artistic voice bi-coastally and really anywhere in between.

The Translator’s powerful multi-waveform sound generation starts with the two fully analog VCO modules. Paired with the two channels of the Low Pass Gate Module, the VCOs can operate as two independent voices or can be used together for deep complex modulation.

ADSR envelope generation is produced by the aptly named ADSR module which is a powerful-for-its-size 4HP module that produces the heartbeat functions and LFOs.
The RND module is compact power station of variable random voltages, setting time signatures and esoteric timing anomalies.

The Sequence 8 is provides simple to complex sequencing when combined with the RND and other control voltage producing variables.
The Bi-Translator System 44 takes on the best features of West Coast synthesis with its insistence on organic percussion. This takes shape in the advent of the precisely crafted Synthrotek Dual Low Pass Gate Module, the LPG. Ear and hand selected vactrols provide organic earth-toned sonic variations from paleo hand drums to skin stringed instruments and beyond to cathedral bells.

Expansive and unique signal processing is provided by the DLY delay module. The DLY, like its predecessor the ECHO, takes full potential of its digital and analog topography by pushing the edges of what delay can do. The DLY performs 50s-era slap back, traditional repeats and even caustic post-industrial clock degeneration.

The 1U Stereo Output Mixer allows for internal signal mixing but also doubles as a performance mixer that allows you to incorporate other electronic music gear into your set.

Modules:
ADSR
DLY: Delay Module
LPG: Low Pass Gate
RND: Random Module
Sequenece 8
VCO (x 2)
1U UniBuffer
1U Stereo Output Mixer
Read more
MRP:$1,440.83
coming soon $1,353.00
FORTHCOMING
SynthRotek MST SYSTEM 84 Modular System
SynthRotek MST SYSTEM 84 Modular System (modular synthesiser system)
Cat: 778518
 
analog modular synthesiser
Notes: Housed in Synthrotek's 84HP Skiff Boat, the MST SYSTEM 84 is a very powerful analog monophonic FULLY modular synthesizer. Includes a power brick.

Powered by Synthrotek's Case Power Red, the MST SYSTEM 84 has the following amperage specs: +12V @ 2A, -12V @ 500mA, +5V @ 1.5A

Modules:
MST MIDI to CV Converter
MST '07 Buffered Multiple
MST VC LFO
MST Noise Sample and Hold / Track and Hold
MST VCO (x 2)
MST 4-Channel Audio/CV Mixer
MST Low Pass Filter
MST Dual Envelope
MST Dual VCA
DLY Module
MST Stereo Output Mixer
Read more
MRP:$2,474.47
coming soon $2,323.64
Artículos del 1 al 25 de 25 en la página 1 de 1

Filter

Coming Soon: Studio Equipment
Close