100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

Inicio  Coming Soon  

Studio Equipment

Options
Artículos del 1 al 25 de 25 en la página 1 de 1
FORTHCOMING
Tangible Waves AE Modular 1-Row 12x1 Narrow Case
Cat: 786529 Rel: 31 Oct 20
 
1-row 12x1 narrow case
Notes: This 1-row rack for AE modular is 12 units wide; two of them are used by the MASTER module so you have 14U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

If you want your rack pre-installed by us, please add the mounting service to your order (module mounting (up to 16 modules) ).

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions:31.1 x 11.2 x 4.5 cm (width x depth x height)
Read more
MRP:$32.80 SAVE 17%
coming soon $27.33
FORTHCOMING
Nux NMP-2 Dual Foot Controller
NUX
Cat: 784822 Rel: 15 Oct 20
 
Dual foot controller
Notes: Dual foot switch controller for on-the-fly control of guitar effects and amplifiers. Dual mono or stereo jack compatible with individual latching/momentary options for each switch. Designed for use with NuX pedals and compatible with many other types of equipment.

LED indicator per pedal
Latching or non-latching selectable
Compatible with NUX Loop Core Deluxe, JTC Drum & Loop PRO and Cerberus

The box for this item contains :

NuX NMP-2 dual foot controller

Power supply: 9Vdc (5.5 x 2.1mm, centre-negative) optional for LEDs
Dimensions: 96 x 50 x 46mm
Weight: 200g
Read more
MRP:$45.92 SAVE 31%
coming soon $31.70
FORTHCOMING
Maxon FA-10 Fuzz Elements Air Ten Series Fuzz Pedal
Cat: 783271 Rel: 02 Oct 20
 
Fuzz pedal
Notes: The FA10 Fuzz Elements Air accurately recreates the distinctive square wave clipping and octave harmonics of one of history's most desirable dirt boxes, the Super Fuzz.

The original Super Fuzz was created by Shin-Ei, but saw later incarnations under brands such as Apollo, Shaftesbury, JAX, Tiesco, Memphis, and most famously, Univox.

It was used on countless recordings in the late 60's & 70's, most notably the Who classic Live at Leeds. Long out of production, the Super Fuzz saw resurgence in the 90's during the Grunge & Alternative Rock era, appearing on the Beastie Boys' Gratitude, Mudhoney's Big Muff Super Fuzz album and Monster Magnet's stoner-rock classic, Superjudge.

The Super Fuzz used dual germanium diodes and a unique full-wave rectification circuit to produce sizzling upper octave harmonics as well as subtle lower harmonics that filled out the guitar sound.

The FA10's analog circuitry nails the Super Fuzz's crushing, compressed tone with surgical precision, and includes the two position Tone switch to toggle between flat and scooped EQ curves. These settings produce wildly different sounds, offering stark contrast to one another and effectively making the FA10 two pedals in one.

A unique aspect of the FA10 is its ability to reproduce rhythm or lead lines with equal clarity, yet without changing settings on the pedal.

Featuring authentic Vintage tones and modern features, the Fuzz Elements Air is the perfect vehicle to make your playing soar.

TECH TALK:
The FA10 features mechanical true bypass switching, Effect LED Indicator, and 9-Volt DC Battery or external adaptor operation.
Read more
MRP:$190.24 SAVE 17%
coming soon $158.53
FORTHCOMING
Empress Effects Buffer Plus Pedal
Cat: 782953 Rel: 30 Sep 20
 
I/O interface
Notes: The Empress buffer+ was designed to be the complete I/O interface for the pedal board, while maintaining the highest fidelity to your guitar's signal.

Signal loss due to long, un-buffered cable runs is an issue that has plagued guitar players for decades. The primary goal of the buffer+ is to eliminate this signal loss, ensuring that your tone is unchanged by your cables.

Additionally, all the connectivity of your pedal board is consolidated to make set up quick and easy. The buffer+ also has a very handy set of features that make life just a little better. Noise filters, input pads, switchable clean boost and input loading are all powerful tools available on the buffer+.

Input Impedance: 10k - 1Meg
Output Impedance: 510 Ohms
Frequency Response (-3dB): 5Hz - 40kHz
Power Input Voltage: 9V DC (Negative tip)
Power Input Connector: 2.1mm barrel connector (Negative tip)
Power Consumption: 86mA
Total Harmonic Distortion: 0.02%
Signal to Noise Ratio: 105.3dB
Headroom: +9.4dBu
Enclosure Material: Die Cast Aluminum
Input connectors: 1/4" Jack
Output connectors: 1/4" Jack
Height (enclosure): 1.25"
Height with controls: 2"
Length: 4.5"
Width: 2.5"
Weight: 0.5 lbs
Read more
MRP:$209.92 SAVE 17%
coming soon $174.93
FORTHCOMING
Empress Effects Nebulus Chorus/Vibrato/Flanger Pedal
Cat: 783089 Rel: 30 Sep 20
 
Chorus/vibrato/flanger pedal
Notes: The Nebulus brings guitarists high quality chorus, flanger and vibrato effects in a really compact 4.5 by 3.5 inch pedal. To increase the tone range even further 3 variations on each effect are available for a total of 9 tweak-able modes. All this flexibility is easy to access via a preset system capable of storing up to 8 different presets.

The chorus mode offers a lush and warm sounding chorus, a fluid and dreamy multi-chorus, and a unique tremolo'ed chorus. The flanger setting has a classic tape flange, a 70's negative feedback type flanger, and the elusive thru-zero flange. Lastly, but certainly not least, are the vibrato sub-modes which include a standard vibrato, a classic vibe sound, and a rotating speaker effect.

Each mode includes a special switch which allows the guitarist to really tweak crucial settings and it also offers some bonus features like the ability to add compression to vibrato mode, for example. For further fine tuning, a tone switch is available offering warm, clean, and bright voicings to the effect.

This true bypass pedal offers the uncompromising sound quality that guitarists have learned to expect from Empress pedals in an incredibly small box. With chorus, flanger and vibrato all only one touch away, this pedal is an incredible value.

Specifications:
Input Impedance: 1Meg
Output Impedance: 1K
Frequency Response (-3dB) - 8Hz - 18.5kHz
Input Headroom: +10.8dBu
Output Headroom: +10.2dBu
Distortion: 0.40%
Signal to Noise: 102.7dB
Power Input Voltage: 9 - 12 V DC (Negative tip)
Power Input Connector: 2.1mm barrel connector (Negative tip)
Power Consumption : ~300mA
Enclosure Material: Die Cast Aluminum
Input connector: 1/4" Jack
Output connector: 1/4" Jack
Height (Enclosure only): 1.5"
Height (including controls): 2"
Length: 3.5"
Width: 4.5"
Weight: 1 lb
Read more
MRP:$413.28 SAVE 17%
coming soon $344.39
FORTHCOMING
Fulltone Supa-Trem Jr Amp-Style Opto Tremolo Pedal With Boost
Cat: 782881 Rel: 26 Sep 20
 
Tremolo pedal
Notes: The logical progression to the beloved Supa-Trem1 is here!

It's a much, much smaller than the ST-1 at only 3.9" wide x 4" deep, and more intelligent version of the epic Supa-Trem1. Sporting True-Bypass,Tap-Tempo, external Tap jack, Half/Double hold feature, up to 15dB boost, true Square, Sine, and the natural heartbeat-like Warble wave-forms! It also can do speeds so slow that a full cycle takes around 10 seconds, and fast speeds beyond 220bpm. The heart of the ST-1 is still there, the warm Analog Devices JFET preamp. And this pedal is so small it will fit in your pocket, and with its top-mounted jacks, will fit in any little spot on your board. Don't forget, just like the ST-1, the Jr also works as an incredible clean boost with the Mix control turned down!

3 switchable waveforms:
Square, (modified) Sine, and (heartbeat-like) Warble wave-forms. Digital Brain (for the oscillator only) with 100% analog signal path. Unlike the ST-1, the Jr can do speeds so slow that a full cycle takes around 10 seconds, and fast speeds beyond 220bpm. The heart of the ST-1 is still there, the warm Analog Devices JFET preamp. And this pedal is so small it will fit in your pocket, and with its top-mounted jacks, will fit in any little spot on your board. Just like the ST-1, the Jr also works as an incredible clean boost with the Mix control turned down!
Read more
MRP:$242.72 SAVE 17%
coming soon $202.27
FORTHCOMING
Keeley Dynatrem Multiple Waveform Tremolo Pedal
Cat: 782397 Rel: 25 Sep 20
 
Tremolo pedal
Notes: The DynaTrem Dynamic Tremolo by Keeley Engineering is an all new type of tremolo that is dynamic and responsive to your playing. Your playing controls the Rate and Depth. The harder you play, the more it responds. Play softly and it relaxes. Set the sensitivity with Rate or Depth controls and you have an unparalleled ability to be expressive with your guitar and tremolo.

Tone Trio - Three Modes
Dynamic Rate - Your playing strength controls the Rate. The harder you play, the faster it modulates! Relax and play softly and the tremolo almost stops.

Dynamic Depth - Play gently and it just barely throbs. Play aggressively and it and pulse hard and deep.

Harmonic Tremolo + Reverb Mode. Yes that phaser/vibey, soulful and sweet sound! Slippery and smooth, you won't want to gig without it. Add Reverb by adjusting the SHAPE control

Wave Table
With a spin of the SHAPE control you get 4 wave-forms: Ramp Up, Sine Wave, Ramp Down, and Square Wave.

4th Mode! All DynaTrems after serial number 300 have a hidden feature mode: Stadard Tremolo Turn the Shape knob all of the way down and it become a standard triangle wave tremolo in the Delta Rate or Delta Depth modes. Call us for a free upgrade if yours does not have this feature.

Or, when in Harmonic Tremolo Mode the Shape control is Reverb!

Other Features:
Integrated noise reduction - developed with the code to reduce noise swells common with tremolo circuit, you get the quietest effect possible.

Output Volume Control - Can be set for a boost for stand out effect.

True-Bypass - No tone loss when off

Battery Free - Any standard 9 volt, negative tip power supply will work, like a Voodoo Lab Pedal Power II. 60mA or greater.

Keeley Engineered - Decades of audio experience and design.

The DynaTrem Dynamic Tremolo features killer graphics! Looks like an old tube amp or old tube radio. Tone to match too!
Read more
MRP:$261.09 SAVE 17%
coming soon $217.57
FORTHCOMING
Old Blood Noise Mondegreen Weird Delay Pedal
Cat: 782153 Rel: 24 Sep 20
 
Delay pedal
Notes: The Old Blood Noise Endeavors Mondegreen pedal is a digital delay hellbent on giving you something different than what you put in. It's delay. Into modulation. And it's weird.

A three-way toggle switch selects between three modes of modulated delay.
STUTTER: A delay with a percussive tremolo on the trails.
WHIRL: A modulated delay adding chorus on the wet signal.
SHEER: A delay with increasing octaves on the repeats.

9VDC - 2.1mm negative center pin adapter.
60 mA draw.
Read more
MRP:$247.97 SAVE 17%
coming soon $206.64
FORTHCOMING
WMD SCLPL Stereo 5-Band Digital EQ & Morphing Filter Module
Cat: 776823 Rel: 31 Aug 20
 
filter module
Notes: SCLPL (pronounced SCALPEL) is a Stereo 5-Band Digital EQ / Morphing Filter module for eurorack modular synthesizers. Use it to cut out problem frequencies on voices in your mix or to add pleasing enhancements to your stereo field.

Dual Mono and Stereo Control Schemes make it an excellent addition to any WMD Performance Mixer Setup. Add 4 SCLPL for 8 channels of EQ in 16HP. Put a 5th on the Master Bus and you have the ultimate eurorack mixing setup!

A simple user interface makes it a powerful tool for many use cases. It features 9 user-programmable preset slots that can then be "morphed" between seamlessly with CV or the Level knob in Morph Mode.

Each frequency band is set independently with the Level, Q, and Frequency knobs, and a helpful LED display aids in knowing exactly what's going on at all times.

Frequency bands include a Low Shelf, 3 Mid-Range Peaking Bands, and a High Shelf.
Read more
coming soon $248.18
FORTHCOMING
Klarkteknik 3rd Dimension BBD-320 Analog Multi-Dimensional Signal Processor
Cat: 782075 Rel: 24 Aug 20
 
Multi dimensional signal processor
Notes: Analog Multi-Dimensional Signal Processor with BBD Technology

Read more
coming soon $150.88
FORTHCOMING
Eurorack Hardware Modules AMIX Active Audio & CV Mixer Module (black faceplate) (fully assembled)
Notes: The AMIX module from Eurorack Hardware has three channel (active) powered mixer in 2HP for Eurorack. Great for both Audio and CV sources. Matte black panel with white graphics. Max gain of 1.
Current Draw: +12=15mA, -12=10mA, +5=0
Read more
MRP:$87.90 SAVE 19%
coming soon $71.06
FORTHCOMING
EMW Gate Delay Module (black faceplate)
Notes: The EMW GATE DELAY module can induce a delay on a gate signal. The delay amount can be adjusted using the SET and RESET knobs on the front panel. A delayed gate signal or pulse is very useful to promote the trigger of envelopes and other modules in alternative moments in a patch, creating some very interesting and unexpected effects and modulations.

Eurorack (3U) form factor - 6 HP width
Power consumption: +12V [29mA] / -12V [0mA]
Weight: 64g
Depth: 50mm
Read more
MRP:$107.58 SAVE 20%
coming soon $86.37
FORTHCOMING
EMW 10V Level Converter Module (black faceplate)
Notes: 8-cannel voltage converter

Eurorack (3U) form factor
Read more
MRP:$98.40 SAVE 20%
coming soon $78.72
FORTHCOMING
Analogue Systems RS-100N Lowpass Module
Cat: 777029
 
low pass filter module
Notes: This low pass filter is a very good -24dB/octave Moog filter, based on the classic Moog cascade with selected, low-noise transistors. Being the successor of the RS-100, the new "S" version features several improvements regarding stability, tracking, distortion behavoiur and also the frequency range.

Two signal inputs, resonance, manually and voltage controlled cutoff frequency. Frequency range 10Hz to 35kHz with CVs applied. The transistors used in the filter cascade are low-noise and have been selected and matched in pairs to improve the frequency response over the whole frequency range. A better stability guarantees, after a one minute heating time, that the filter can be used as a clean and well tracking sine wave oscillator.
Read more
MRP:$224.35 SAVE 12%
coming soon $196.79
FORTHCOMING
ADDAC System ADDAC106 T-Noiseworks Module (black faceplate)
Notes: This is the last module in Addac System's T-Networks series, a straight forward 4 voice module with frequency and decay controls for each of the voices. As the name already unveils , a noise source has been added, and 2 different circuits have been created, that explore the timbre of a t-network when used to filter noise.

There are 2 different circuits in this module, voices 1 to 3 have a pre-vca t-network filter while in voice 4 the t-networks filter applied post-vca.

At each voice input there's a switch which sets which type of input to use, this signal will be used to control an internal VCA hence why the type of setting defined here is important:
1. Trigger - Any incoming CV will be converted into a 1ms trigger as soon as it crosses it's fixed threshold.
2. Mute - This disconnects then incoming signal effectivelly muting the voice.

3. Envelopes - This can be used with CV sources as well as Gate sources and simply follows the input signal.

This incoming signal will then be processed by a slew circuit which adds a decay factor allowing the user to set the "Tail" of each voice.

Trigger mode is mostly dedicated for percussive sounds while the Envelope mode is open to any external enve- lope control and able to control noise swooshes, swirls, crackles and pops simply out of t-networks filtered noise.

Audio inputs are also welcomed to be used as a Trigger/Envelope input.

Diferences between voices:
The first 3 voices also feature a Timbre selector switch: Hat/Snare
In Snare mode all frequencies coming from the t-networks filter pass thru to the output .
In Hat mode it adds a High Pass circuit which removes the mid/bottom frequencies (characteristic of the snare strike) creating a higher spectrum output which is closer to a Hat timbre.
All of these 3 voices are also differently tuned from each other to offer more timbrical options.

Voice 4 is closer to a typical t-networks circuit but this time peculiar one where the noise is gated by the vca and then sent through the t-networks filter.

Hat and Snare are terms used very looselly here, they are timbrical references and do not in any shape or form try to effectivelly replicate the complex timbres of a real world Hat or Snare.
Read more
MRP:$181.06
coming soon $173.83
FORTHCOMING
ADDAC System ADDAC111 Ultra .WAV Player Module (red faceplate)
Cat: 776121
 
.wav player module
Notes: The ADDAC111 ULTRA .WAV PLAYER is the long awaited upgrade to the praised ADDAC101 .WAV PLAYER.

While keeping all functions of the original, there's more dedicated controls as well as a few new functions.

For this version, Micro SD Cards were used- this decision was made in order to help the hardware construction and make it only 3cm deep.

An Expansion module, ADDAC111B, was also created to allow users to recall the first 8 files through dedicated trigger signals. This allows sequencing of files.

The Loop Size, Start Point and Sample Rate defines how the loop is played.

Loop Settings defines if sample is looping or playing only once.

File Access if it advances to the next or previous file.

The VCA section controls the overall volume of the module.

And finally the Envelope Follower generates a CV voltage related to the amplitude of the audio signal pre-VCA.
Read more
MRP:$620.58
coming soon $598.05
FORTHCOMING
ADDAC System ADDAC105 4 Voice Cluster Module (black faceplate)
Cat: 776118
 
4-voice cluster module
Notes: Following the ADDAC103 T-Networks, this new module is inspired by it's simplicity. This is a 4 voice Square Oscillator with VCA, FM switch and a slew decay for the incoming Trigger IN. All voices are then sent through a Multimode Filter.

Each voice has it's own VCA input where any input is accepted (Trigger, Gate, CV) The [DECAY] controls the slew decay applied to the incoming signal, if [DECAY] is fully anti-clockwise then it works as a Mute. The [FM ON] switches activate/deactivate the FM input coming from the previous voice: Voice 1 FM comes from voice 4, voice 2 FM comes from voice 1, and so on, so you can FM all of them in a FM loop.

All 4 voices are summed and sent through a filter with controls over [CUTOFF] with an Attenuverter for the CV input and [RESO- NANCE]. Three filter outputs are provided [LOWPASS], [BANDPASS] and [HIGHPASS]

The [EXTERNAL IN] input can be routed through a jumper on the back of the module allowing the incoming signal to go to:
the filter input for processing an external audio source.
all of the 4 voices Frequency control allowing for some experi- mental CV control over pitch of all 4 voices at the same time (due to the specificities of the circuit and to keep the module at a low price these inputs are not callibrated to 1v/octave).

Read more
MRP:$112.83
coming soon $108.23
FORTHCOMING
ADDAC System ADDAC103 T-Networks Module (black faceplate)
Cat: 776114
 
4-voice percussion module
Notes: Inspired by Twin T-Networks circuits used in many lengendary drum machines, ADDAC system have developed a simple and straight forward 4 voice percussion module with frequency controls for each of its voices.

At each voice input there's a gate to trigger converter so any input source is possible.
Audio inputs can also be used as an input, in this case and due to the nature of the gate to trigger converter, each voice can be used as very destructive filters.

The top 2 channels feature a higher frequency range, the bottom 2 channels feature a lower frequency range.

Tech Specs:
6HP
2.5 cm deep
40mA +12V
40mA -12V
Read more
MRP:$112.83
coming soon $108.23
FORTHCOMING
ADDAC System ADDAC104 VC T-Networks Module (black faceplate)
Notes: Following the ADDAC103 T-Networks, this new module is also inspired by Twin T-Networks circuits used in many lengendary drum machines. A simple 4 voice module with frequency controls for each of the voices. This new module also features CV inputs with attenuverters for each voice Frequency. Due to the specificities of the circuit, and to keep the module at a low price, these inputs are not callibrated to 1v/octave.

At each voice input there's a gate to trigger converter so any input source is possible.
Audio inputs can also be used as an input, in this case and due to the nature of the gate to trigger converter, each voice can be used as very destructive filters.

The top 2 channels feature a higher frequency range, the bottom 2 channels feature a lower frequency range.
Read more
MRP:$181.06
coming soon $173.83
FORTHCOMING
ADDAC System ADDAC209 VC Time Compensated Glide Module (red faceplate)
Cat: 776185
 
glide/slew circuit module
Notes: This is our take on a glide/slew circuit. It introduces a time compensation for the glide/slew rate so that any interval have the same glide time.

Normal glides have a fixed speed, they take X time to go up a semitone and X*12 to go up an octave. A compensation circuit was added to detect and dynamically change the speed according to the distance needed to be made, so that in the end it'll take the same time to reach the final destination no matter if the interval is 1 semitone or 3 octaves. This compensation feature (dry/wet) can controlled by the front panel knob or by CV.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 55 mm

Electrical:
. Max current: 60mA.
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.

Included:
.black screws
.black fibre washers
Read more
MRP:$101.02
coming soon $98.39
FORTHCOMING
ADDAC System ADDAC210 Open Heart Surgery Module (red faceplate)
Cat: 776186
 
development platfom module
Notes: This is a development platform optimized for the Eurorack electronic enthusiast.

Power sources:
-12V, +12V
-3/10V, +3/10V

Ships with: 1M Ribbon Cable and 55cm standoff Spacers for desktop operation, screws and nylon washers

Mechanical Specs:
Width: 36 HP
Depth: 3.5cm (i1.375 inches) with or without Arduino installed, Depth increases if using arduino shields.
Read more
MRP:$326.69
coming soon $314.87
FORTHCOMING
ADDAC System ADDAC213A Eurorack Bridge Module (black faceplate)
Notes: A pair of ADDAC213As acts as a simple one-cable bridge between different cases. By itself the ADDAC213As can send/receive 8 CV or audio signals between your cases, but can be expanded to bridge two cases for up to 24 signals at the same time.

Use a pair of ADDAC213As to send & receive 8 CV or audio signals between distant points in your case, between two separate cases, or between your case and a friend's case. Less clatter, less spaghetti, faster connection! There's nothing better than being able to connect that controller skiff with just one cable to your main system. At a gig, in the studio, when jamming with a friend, give yourself a gift by grabbing a pair of ADDAC213As.The modules can be installed in normal position or a 180 degree position to fit any need and any case design.

Each ADDAC213A module can be connected through a ribbon cable connection on its backside with up to two ADDAC213Bs. Each ADDAC213B module added expands the channels options of the ADDAC213A by adding 8 more channels. With two 2 ADDAC213Bs connected to each ADDAC213A module, you'll have a total of 24 channels going between your cases with a simple one-cable bridge. Between the ADDAC213A pair and the ADDAC213B, your cases never looked so elegantly connected together!

The ADDAC213As are always sold as a pair of 2 modules and an included ribbon cable.

Each module can be installed in normal position or at 180 degrees.

Mechanical:
. Format: Eurorack
. Width: 6 HP
. Depth: 2.4 cm

Electrical:
Passive / Does not draw current
Ribbon Cable: 50cm or 100cm ribbon cable
Read more
MRP:$107.58
coming soon $103.86
FORTHCOMING
ADDAC System ADDAC215 Dual S&H+ Module (black faceplate)
Cat: 776254
 
dual sample & holds module
Notes: This new module should not be judged by it's size, at 6hp it's packed with features.

At its core it features a noise source and two precision Sample & Holds with 0.01% of maximum deviation from the Input which allows for quantized signals to be sent through without any noticeable detuning or the typical voltage drops over time.

The Sample & Hold sections can also be used as a Track & Hold meaning it holds the incoming input while the Trigger input is ON and lets the input flow to the output when the Trigger input is OFF.
Each section also features it's own slew processor with a single control over attack and decay and an ON/OFF switch.

The noise signal is normalled to both sections inputs, meaning that without a jack plugged into the Input the sample and hold function will act upon the incoming noise signal generating random CV values.

The [Trigger A Alternate] switch allows to Link both sections so that any trigger input in Trigger A will alternate between triggering the A and B section.

Besides each section outputs there's also 4 extra outputs: Noise, Difference, Average and Sum. The Noise output is coming from the noise source, the Difference output is the subtraction of section A minus section B, the Average output is the sum of both A plus B and then divided by 2 and finally the Sum output is the sum of both A plus B sections.

MECHANICAL:
Format: Eurorack
Width: 6 HP
Depth: 4 cm

ELECTRICAL:
Max current: +50mA/-50mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$141.70
coming soon $136.66
FORTHCOMING
SynthRotek LPG Low Pass Gate Module (black faceplate) (fully assembled)
Notes: The LPG is a West Coast Synthesis staple! The dual Low Pass Gate creates organic percussion timbres, paving the way for sonic exploration with a Buchla/Subotnick vibe.

The LPG has two low pass gates in one module. Its unique non-linear qualities emulate percussion timbres like congas, bongos, plucks, etc. The LPG is vactrol based, which creates natural-sounding decays. When the CV input is pinged by short/fast envelopes, it results in more organic sounds like bongos. The slide pot functions in two ways: when the the CV input is not patched, it attenuates/mixes the audio signal. When the CV jack is patched, it attenuates the output level and changes the timbre of the audio signal.

Each LPG channel can be used as a VCA. VCA mode bypasses the low pass filter and resonance and doesn't color the sound of your input audio. The vactrol gives the VCA a living, breathing, non-linear response.

A number of vactrols were tested for this module, and the pre-tested NSL-7053 yielded the most positive results. The NSL-7053 has a slower response and a more exponential response curve. The VTL5C4 has a slightly faster response and a more linear response curve. Vactrols have a lot of variance, so even if you use the same vactrols for both channels, each channel may sound a little different. But the LPG will work with a number of different types/brands, including dual vactrols. In fact, each channel can be built with a different set of vactrols. (Note: VTL5C3 and VTL5C3/2 vactrols are not recommended in the LPG.)

Specifications:
Width: 4HP
Depth: 57mm
Current draw:
+12V: 45mA
-12V: 45mA
Read more
MRP:$157.44 SAVE 19%
coming soon $127.91
FORTHCOMING
Tangerine Dream Solace Package (limited edition)
Cat: 777107
 
facemask bundle package
Notes: Content: 2 face masks, 1 high-quality poster of the Barbican TD Exhibition, 1 fridge magnet showing Edgar Froese.

Material: Cotton satin, breathable, hand-made, with elastic earloops, washable at 60 degrees Celsius.
Read more
coming soon $27.68
Artículos del 1 al 25 de 25 en la página 1 de 1

Filter

Coming Soon: Studio Equipment
Close