100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

Inicio  Coming Soon  

Studio Equipment

Options
Artículos del 1 al 50 de 544 en la página 1 de 11
1  2  3  ...  11  »
FORTHCOMING
Empress Effects Buffer Plus Pedal
Cat: 782953 Rel: 30 Sep 20
 
I/O interface
Notes: The Empress buffer+ was designed to be the complete I/O interface for the pedal board, while maintaining the highest fidelity to your guitar's signal.

Signal loss due to long, un-buffered cable runs is an issue that has plagued guitar players for decades. The primary goal of the buffer+ is to eliminate this signal loss, ensuring that your tone is unchanged by your cables.

Additionally, all the connectivity of your pedal board is consolidated to make set up quick and easy. The buffer+ also has a very handy set of features that make life just a little better. Noise filters, input pads, switchable clean boost and input loading are all powerful tools available on the buffer+.

Input Impedance: 10k - 1Meg
Output Impedance: 510 Ohms
Frequency Response (-3dB): 5Hz - 40kHz
Power Input Voltage: 9V DC (Negative tip)
Power Input Connector: 2.1mm barrel connector (Negative tip)
Power Consumption: 86mA
Total Harmonic Distortion: 0.02%
Signal to Noise Ratio: 105.3dB
Headroom: +9.4dBu
Enclosure Material: Die Cast Aluminum
Input connectors: 1/4" Jack
Output connectors: 1/4" Jack
Height (enclosure): 1.25"
Height with controls: 2"
Length: 4.5"
Width: 2.5"
Weight: 0.5 lbs
Read more
MRP:$210.43 SAVE 17%
coming soon $175.36
FORTHCOMING
Empress Effects Nebulus Chorus/Vibrato/Flanger Pedal
Cat: 783089 Rel: 30 Sep 20
 
Chorus/vibrato/flanger pedal
Notes: The Nebulus brings guitarists high quality chorus, flanger and vibrato effects in a really compact 4.5 by 3.5 inch pedal. To increase the tone range even further 3 variations on each effect are available for a total of 9 tweak-able modes. All this flexibility is easy to access via a preset system capable of storing up to 8 different presets.

The chorus mode offers a lush and warm sounding chorus, a fluid and dreamy multi-chorus, and a unique tremolo'ed chorus. The flanger setting has a classic tape flange, a 70's negative feedback type flanger, and the elusive thru-zero flange. Lastly, but certainly not least, are the vibrato sub-modes which include a standard vibrato, a classic vibe sound, and a rotating speaker effect.

Each mode includes a special switch which allows the guitarist to really tweak crucial settings and it also offers some bonus features like the ability to add compression to vibrato mode, for example. For further fine tuning, a tone switch is available offering warm, clean, and bright voicings to the effect.

This true bypass pedal offers the uncompromising sound quality that guitarists have learned to expect from Empress pedals in an incredibly small box. With chorus, flanger and vibrato all only one touch away, this pedal is an incredible value.

Specifications:
Input Impedance: 1Meg
Output Impedance: 1K
Frequency Response (-3dB) - 8Hz - 18.5kHz
Input Headroom: +10.8dBu
Output Headroom: +10.2dBu
Distortion: 0.40%
Signal to Noise: 102.7dB
Power Input Voltage: 9 - 12 V DC (Negative tip)
Power Input Connector: 2.1mm barrel connector (Negative tip)
Power Consumption : ~300mA
Enclosure Material: Die Cast Aluminum
Input connector: 1/4" Jack
Output connector: 1/4" Jack
Height (Enclosure only): 1.5"
Height (including controls): 2"
Length: 3.5"
Width: 4.5"
Weight: 1 lb
Read more
MRP:$414.29 SAVE 17%
coming soon $345.23
FORTHCOMING
EMW Gate Delay Module (black faceplate)
Notes: The EMW GATE DELAY module can induce a delay on a gate signal. The delay amount can be adjusted using the SET and RESET knobs on the front panel. A delayed gate signal or pulse is very useful to promote the trigger of envelopes and other modules in alternative moments in a patch, creating some very interesting and unexpected effects and modulations.

Eurorack (3U) form factor - 6 HP width
Power consumption: +12V [29mA] / -12V [0mA]
Weight: 64g
Depth: 50mm
Read more
MRP:$107.85 SAVE 20%
coming soon $86.58
FORTHCOMING
EMW 10V Level Converter Module (black faceplate)
Notes: 8-cannel voltage converter

Eurorack (3U) form factor
Read more
MRP:$98.64 SAVE 20%
coming soon $78.91
FORTHCOMING
Maxon FA-10 Fuzz Elements Air Ten Series Fuzz Pedal
Cat: 783271 Rel: 02 Oct 20
 
Fuzz pedal
Notes: The FA10 Fuzz Elements Air accurately recreates the distinctive square wave clipping and octave harmonics of one of history's most desirable dirt boxes, the Super Fuzz.

The original Super Fuzz was created by Shin-Ei, but saw later incarnations under brands such as Apollo, Shaftesbury, JAX, Tiesco, Memphis, and most famously, Univox.

It was used on countless recordings in the late 60's & 70's, most notably the Who classic Live at Leeds. Long out of production, the Super Fuzz saw resurgence in the 90's during the Grunge & Alternative Rock era, appearing on the Beastie Boys' Gratitude, Mudhoney's Big Muff Super Fuzz album and Monster Magnet's stoner-rock classic, Superjudge.

The Super Fuzz used dual germanium diodes and a unique full-wave rectification circuit to produce sizzling upper octave harmonics as well as subtle lower harmonics that filled out the guitar sound.

The FA10's analog circuitry nails the Super Fuzz's crushing, compressed tone with surgical precision, and includes the two position Tone switch to toggle between flat and scooped EQ curves. These settings produce wildly different sounds, offering stark contrast to one another and effectively making the FA10 two pedals in one.

A unique aspect of the FA10 is its ability to reproduce rhythm or lead lines with equal clarity, yet without changing settings on the pedal.

Featuring authentic Vintage tones and modern features, the Fuzz Elements Air is the perfect vehicle to make your playing soar.

TECH TALK:
The FA10 features mechanical true bypass switching, Effect LED Indicator, and 9-Volt DC Battery or external adaptor operation.
Read more
MRP:$190.70 SAVE 17%
coming soon $158.92
FORTHCOMING
ADDAC System ADDAC209 VC Time Compensated Glide Module (red faceplate)
Cat: 776185
 
glide/slew circuit module
Notes: This is our take on a glide/slew circuit. It introduces a time compensation for the glide/slew rate so that any interval have the same glide time.

Normal glides have a fixed speed, they take X time to go up a semitone and X*12 to go up an octave. A compensation circuit was added to detect and dynamically change the speed according to the distance needed to be made, so that in the end it'll take the same time to reach the final destination no matter if the interval is 1 semitone or 3 octaves. This compensation feature (dry/wet) can controlled by the front panel knob or by CV.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 55 mm

Electrical:
. Max current: 60mA.
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.

Included:
.black screws
.black fibre washers
Read more
MRP:$101.27
coming soon $98.63
FORTHCOMING
ADDAC System ADDAC210 Open Heart Surgery Module (red faceplate)
Cat: 776186
 
development platfom module
Notes: This is a development platform optimized for the Eurorack electronic enthusiast.

Power sources:
-12V, +12V
-3/10V, +3/10V

Ships with: 1M Ribbon Cable and 55cm standoff Spacers for desktop operation, screws and nylon washers

Mechanical Specs:
Width: 36 HP
Depth: 3.5cm (i1.375 inches) with or without Arduino installed, Depth increases if using arduino shields.
Read more
MRP:$327.48
coming soon $315.63
FORTHCOMING
ADDAC System ADDAC213A Eurorack Bridge Module (black faceplate)
Notes: A pair of ADDAC213As acts as a simple one-cable bridge between different cases. By itself the ADDAC213As can send/receive 8 CV or audio signals between your cases, but can be expanded to bridge two cases for up to 24 signals at the same time.

Use a pair of ADDAC213As to send & receive 8 CV or audio signals between distant points in your case, between two separate cases, or between your case and a friend's case. Less clatter, less spaghetti, faster connection! There's nothing better than being able to connect that controller skiff with just one cable to your main system. At a gig, in the studio, when jamming with a friend, give yourself a gift by grabbing a pair of ADDAC213As.The modules can be installed in normal position or a 180 degree position to fit any need and any case design.

Each ADDAC213A module can be connected through a ribbon cable connection on its backside with up to two ADDAC213Bs. Each ADDAC213B module added expands the channels options of the ADDAC213A by adding 8 more channels. With two 2 ADDAC213Bs connected to each ADDAC213A module, you'll have a total of 24 channels going between your cases with a simple one-cable bridge. Between the ADDAC213A pair and the ADDAC213B, your cases never looked so elegantly connected together!

The ADDAC213As are always sold as a pair of 2 modules and an included ribbon cable.

Each module can be installed in normal position or at 180 degrees.

Mechanical:
. Format: Eurorack
. Width: 6 HP
. Depth: 2.4 cm

Electrical:
Passive / Does not draw current
Ribbon Cable: 50cm or 100cm ribbon cable
Read more
MRP:$107.85
coming soon $104.11
FORTHCOMING
Fulltone Supa-Trem Jr Amp-Style Opto Tremolo Pedal With Boost
Cat: 782881 Rel: 26 Sep 20
 
Tremolo pedal
Notes: The logical progression to the beloved Supa-Trem1 is here!

It's a much, much smaller than the ST-1 at only 3.9" wide x 4" deep, and more intelligent version of the epic Supa-Trem1. Sporting True-Bypass,Tap-Tempo, external Tap jack, Half/Double hold feature, up to 15dB boost, true Square, Sine, and the natural heartbeat-like Warble wave-forms! It also can do speeds so slow that a full cycle takes around 10 seconds, and fast speeds beyond 220bpm. The heart of the ST-1 is still there, the warm Analog Devices JFET preamp. And this pedal is so small it will fit in your pocket, and with its top-mounted jacks, will fit in any little spot on your board. Don't forget, just like the ST-1, the Jr also works as an incredible clean boost with the Mix control turned down!

3 switchable waveforms:
Square, (modified) Sine, and (heartbeat-like) Warble wave-forms. Digital Brain (for the oscillator only) with 100% analog signal path. Unlike the ST-1, the Jr can do speeds so slow that a full cycle takes around 10 seconds, and fast speeds beyond 220bpm. The heart of the ST-1 is still there, the warm Analog Devices JFET preamp. And this pedal is so small it will fit in your pocket, and with its top-mounted jacks, will fit in any little spot on your board. Just like the ST-1, the Jr also works as an incredible clean boost with the Mix control turned down!
Read more
MRP:$243.31 SAVE 17%
coming soon $202.76
FORTHCOMING
SynthRotek LPG Low Pass Gate Module (black faceplate) (fully assembled)
Notes: The LPG is a West Coast Synthesis staple! The dual Low Pass Gate creates organic percussion timbres, paving the way for sonic exploration with a Buchla/Subotnick vibe.

The LPG has two low pass gates in one module. Its unique non-linear qualities emulate percussion timbres like congas, bongos, plucks, etc. The LPG is vactrol based, which creates natural-sounding decays. When the CV input is pinged by short/fast envelopes, it results in more organic sounds like bongos. The slide pot functions in two ways: when the the CV input is not patched, it attenuates/mixes the audio signal. When the CV jack is patched, it attenuates the output level and changes the timbre of the audio signal.

Each LPG channel can be used as a VCA. VCA mode bypasses the low pass filter and resonance and doesn't color the sound of your input audio. The vactrol gives the VCA a living, breathing, non-linear response.

A number of vactrols were tested for this module, and the pre-tested NSL-7053 yielded the most positive results. The NSL-7053 has a slower response and a more exponential response curve. The VTL5C4 has a slightly faster response and a more linear response curve. Vactrols have a lot of variance, so even if you use the same vactrols for both channels, each channel may sound a little different. But the LPG will work with a number of different types/brands, including dual vactrols. In fact, each channel can be built with a different set of vactrols. (Note: VTL5C3 and VTL5C3/2 vactrols are not recommended in the LPG.)

Specifications:
Width: 4HP
Depth: 57mm
Current draw:
+12V: 45mA
-12V: 45mA
Read more
MRP:$157.82 SAVE 19%
coming soon $128.22
FORTHCOMING
Old Blood Noise Mondegreen Weird Delay Pedal
Cat: 782153 Rel: 24 Sep 20
 
Delay pedal
Notes: The Old Blood Noise Endeavors Mondegreen pedal is a digital delay hellbent on giving you something different than what you put in. It's delay. Into modulation. And it's weird.

A three-way toggle switch selects between three modes of modulated delay.
STUTTER: A delay with a percussive tremolo on the trails.
WHIRL: A modulated delay adding chorus on the wet signal.
SHEER: A delay with increasing octaves on the repeats.

9VDC - 2.1mm negative center pin adapter.
60 mA draw.
Read more
MRP:$248.57 SAVE 17%
coming soon $207.14
FORTHCOMING
ADDAC System ADDAC106 T-Noiseworks Module (black faceplate)
Notes: This is the last module in Addac System's T-Networks series, a straight forward 4 voice module with frequency and decay controls for each of the voices. As the name already unveils , a noise source has been added, and 2 different circuits have been created, that explore the timbre of a t-network when used to filter noise.

There are 2 different circuits in this module, voices 1 to 3 have a pre-vca t-network filter while in voice 4 the t-networks filter applied post-vca.

At each voice input there's a switch which sets which type of input to use, this signal will be used to control an internal VCA hence why the type of setting defined here is important:
1. Trigger - Any incoming CV will be converted into a 1ms trigger as soon as it crosses it's fixed threshold.
2. Mute - This disconnects then incoming signal effectivelly muting the voice.

3. Envelopes - This can be used with CV sources as well as Gate sources and simply follows the input signal.

This incoming signal will then be processed by a slew circuit which adds a decay factor allowing the user to set the "Tail" of each voice.

Trigger mode is mostly dedicated for percussive sounds while the Envelope mode is open to any external enve- lope control and able to control noise swooshes, swirls, crackles and pops simply out of t-networks filtered noise.

Audio inputs are also welcomed to be used as a Trigger/Envelope input.

Diferences between voices:
The first 3 voices also feature a Timbre selector switch: Hat/Snare
In Snare mode all frequencies coming from the t-networks filter pass thru to the output .
In Hat mode it adds a High Pass circuit which removes the mid/bottom frequencies (characteristic of the snare strike) creating a higher spectrum output which is closer to a Hat timbre.
All of these 3 voices are also differently tuned from each other to offer more timbrical options.

Voice 4 is closer to a typical t-networks circuit but this time peculiar one where the noise is gated by the vca and then sent through the t-networks filter.

Hat and Snare are terms used very looselly here, they are timbrical references and do not in any shape or form try to effectivelly replicate the complex timbres of a real world Hat or Snare.
Read more
MRP:$181.50
coming soon $174.25
FORTHCOMING
ADDAC System ADDAC111 Ultra .WAV Player Module (red faceplate)
Cat: 776121
 
.wav player module
Notes: The ADDAC111 ULTRA .WAV PLAYER is the long awaited upgrade to the praised ADDAC101 .WAV PLAYER.

While keeping all functions of the original, there's more dedicated controls as well as a few new functions.

For this version, Micro SD Cards were used- this decision was made in order to help the hardware construction and make it only 3cm deep.

An Expansion module, ADDAC111B, was also created to allow users to recall the first 8 files through dedicated trigger signals. This allows sequencing of files.

The Loop Size, Start Point and Sample Rate defines how the loop is played.

Loop Settings defines if sample is looping or playing only once.

File Access if it advances to the next or previous file.

The VCA section controls the overall volume of the module.

And finally the Envelope Follower generates a CV voltage related to the amplitude of the audio signal pre-VCA.
Read more
MRP:$622.09
coming soon $599.51
FORTHCOMING
ADDAC System ADDAC105 4 Voice Cluster Module (black faceplate)
Cat: 776118
 
4-voice cluster module
Notes: Following the ADDAC103 T-Networks, this new module is inspired by it's simplicity. This is a 4 voice Square Oscillator with VCA, FM switch and a slew decay for the incoming Trigger IN. All voices are then sent through a Multimode Filter.

Each voice has it's own VCA input where any input is accepted (Trigger, Gate, CV) The [DECAY] controls the slew decay applied to the incoming signal, if [DECAY] is fully anti-clockwise then it works as a Mute. The [FM ON] switches activate/deactivate the FM input coming from the previous voice: Voice 1 FM comes from voice 4, voice 2 FM comes from voice 1, and so on, so you can FM all of them in a FM loop.

All 4 voices are summed and sent through a filter with controls over [CUTOFF] with an Attenuverter for the CV input and [RESO- NANCE]. Three filter outputs are provided [LOWPASS], [BANDPASS] and [HIGHPASS]

The [EXTERNAL IN] input can be routed through a jumper on the back of the module allowing the incoming signal to go to:
the filter input for processing an external audio source.
all of the 4 voices Frequency control allowing for some experi- mental CV control over pitch of all 4 voices at the same time (due to the specificities of the circuit and to keep the module at a low price these inputs are not callibrated to 1v/octave).

Read more
MRP:$113.11
coming soon $108.49
FORTHCOMING
Keeley Dynatrem Multiple Waveform Tremolo Pedal
Cat: 782397 Rel: 25 Sep 20
 
Tremolo pedal
Notes: The DynaTrem Dynamic Tremolo by Keeley Engineering is an all new type of tremolo that is dynamic and responsive to your playing. Your playing controls the Rate and Depth. The harder you play, the more it responds. Play softly and it relaxes. Set the sensitivity with Rate or Depth controls and you have an unparalleled ability to be expressive with your guitar and tremolo.

Tone Trio - Three Modes
Dynamic Rate - Your playing strength controls the Rate. The harder you play, the faster it modulates! Relax and play softly and the tremolo almost stops.

Dynamic Depth - Play gently and it just barely throbs. Play aggressively and it and pulse hard and deep.

Harmonic Tremolo + Reverb Mode. Yes that phaser/vibey, soulful and sweet sound! Slippery and smooth, you won't want to gig without it. Add Reverb by adjusting the SHAPE control

Wave Table
With a spin of the SHAPE control you get 4 wave-forms: Ramp Up, Sine Wave, Ramp Down, and Square Wave.

4th Mode! All DynaTrems after serial number 300 have a hidden feature mode: Stadard Tremolo Turn the Shape knob all of the way down and it become a standard triangle wave tremolo in the Delta Rate or Delta Depth modes. Call us for a free upgrade if yours does not have this feature.

Or, when in Harmonic Tremolo Mode the Shape control is Reverb!

Other Features:
Integrated noise reduction - developed with the code to reduce noise swells common with tremolo circuit, you get the quietest effect possible.

Output Volume Control - Can be set for a boost for stand out effect.

True-Bypass - No tone loss when off

Battery Free - Any standard 9 volt, negative tip power supply will work, like a Voodoo Lab Pedal Power II. 60mA or greater.

Keeley Engineered - Decades of audio experience and design.

The DynaTrem Dynamic Tremolo features killer graphics! Looks like an old tube amp or old tube radio. Tone to match too!
Read more
MRP:$261.72 SAVE 17%
coming soon $218.10
FORTHCOMING
Eurorack Hardware Modules AMIX Active Audio & CV Mixer Module (black faceplate) (fully assembled)
Notes: The AMIX module from Eurorack Hardware has three channel (active) powered mixer in 2HP for Eurorack. Great for both Audio and CV sources. Matte black panel with white graphics. Max gain of 1.
Current Draw: +12=15mA, -12=10mA, +5=0
Read more
MRP:$88.12 SAVE 19%
coming soon $71.23
FORTHCOMING
Analogue Systems RS-100N Lowpass Module
Cat: 777029
 
low pass filter module
Notes: This low pass filter is a very good -24dB/octave Moog filter, based on the classic Moog cascade with selected, low-noise transistors. Being the successor of the RS-100, the new "S" version features several improvements regarding stability, tracking, distortion behavoiur and also the frequency range.

Two signal inputs, resonance, manually and voltage controlled cutoff frequency. Frequency range 10Hz to 35kHz with CVs applied. The transistors used in the filter cascade are low-noise and have been selected and matched in pairs to improve the frequency response over the whole frequency range. A better stability guarantees, after a one minute heating time, that the filter can be used as a clean and well tracking sine wave oscillator.
Read more
MRP:$224.90 SAVE 12%
coming soon $197.27
FORTHCOMING
ADDAC System ADDAC103 T-Networks Module (black faceplate)
Cat: 776114
 
4-voice percussion module
Notes: Inspired by Twin T-Networks circuits used in many lengendary drum machines, ADDAC system have developed a simple and straight forward 4 voice percussion module with frequency controls for each of its voices.

At each voice input there's a gate to trigger converter so any input source is possible.
Audio inputs can also be used as an input, in this case and due to the nature of the gate to trigger converter, each voice can be used as very destructive filters.

The top 2 channels feature a higher frequency range, the bottom 2 channels feature a lower frequency range.

Tech Specs:
6HP
2.5 cm deep
40mA +12V
40mA -12V
Read more
MRP:$113.11
coming soon $108.49
FORTHCOMING
ADDAC System ADDAC104 VC T-Networks Module (black faceplate)
Notes: Following the ADDAC103 T-Networks, this new module is also inspired by Twin T-Networks circuits used in many lengendary drum machines. A simple 4 voice module with frequency controls for each of the voices. This new module also features CV inputs with attenuverters for each voice Frequency. Due to the specificities of the circuit, and to keep the module at a low price, these inputs are not callibrated to 1v/octave.

At each voice input there's a gate to trigger converter so any input source is possible.
Audio inputs can also be used as an input, in this case and due to the nature of the gate to trigger converter, each voice can be used as very destructive filters.

The top 2 channels feature a higher frequency range, the bottom 2 channels feature a lower frequency range.
Read more
MRP:$181.50
coming soon $174.25
FORTHCOMING
ADDAC System ADDAC202 Amplifiers Module (red faceplate)
Cat: 776175
 
amplifier module
Notes: A dual channel Amplifier that either boosts your signals up to 10 times the original input or attenuates it to zero.

It also features two leds per channel, to monitor your output polarity.

MECHANICAL:
Format: Eurorack
Width: 4 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
CV outputs: i10v

ELECTRICAL:
Max current: 30mA
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$135.47
coming soon $130.42
FORTHCOMING
ADDAC System ADDAC204 VC CV Mapping Module (red faceplate)
Cat: 776178
 
CV mapping module
Notes: With the VC mapping module you'll be able to scale your voltage and also control its offset via CV.

This module provides two outputs for normal and inverted output voltages. A third output morphs between the normal and inverted outputs.

Mechanical:
. Format: Eurorack
. Width: 6 HP
. Depth: 2 cm

Control Voltage I/O:
. CV inputs: i 10v
. CV outputs: i 10v

Electrical:
. Compatible with +-12v and +-15v power supplies?
. Max current: 40mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$203.86
coming soon $196.18
FORTHCOMING
ADDAC System ADDAC402 Heuristic Rhythm Generator Module (red faceplate)
Notes: This module is a powerful rhythm generation machine- it features 4 voices of gate outputs (including inverted outputs for logic NOT sequences) where each voice can have independent lengths, all configurable with direct knobs anc cv inputs.

Perfect for precise polyrhythmic patterns and all sorts of non-linear sequencing.

The module works by 6 different rhythm generation "algorithms / principles":
Euclidean (equal distribution)
Golomb Rulers (inequal distribution)
Probabilistic (predictable distribution)
Game Of Life (organic progression)
Footwork'n (inducted error progression)
Pong (voltage controlled Pong game)

Plus a 4 channel Gate Sequencer Mode with up to 32 steps and 16 storable presets.

Add ADDAC402B Expansion for full I/O Midi control plus access to a powerful midi interface, with:
Midi Sync
5 cv to midi channels (notes and/or cc)
4 midi to gate channels
All panel controls (knobs, switches and push buttons) as cc controls.

All fully configurable with a midi learn feature for easier configuration.

MECHANICAL:
Format: Eurorack
Width: 20 HP
Depth: 5.5 cm

CONTROL VOLTAGE I/O:
CV inputs: 0 to +10v

ELECTRICAL:
Max current: 150mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$497.15
coming soon $481.14
FORTHCOMING
ADDAC System ADDAC402B HRG Expansion Module (red faceplate)
Cat: 776312
 
MIDI expansion module
Notes: ADDAC402B MIDI Expansion allows full I/O Midi control of ADDAC402 plus access to a powerfull midi interface, with:

Midi Sync:
Allows the module to synchronize with any external MIDI device’s Clock, including transport messages like play, stop and continue.

CV to MIDI:
5 CV inputs (Fills 1 to 4 and Assign) to MIDI Notes and/or CC messages, the Note and CC number can be independently configured via the Configuration Menu.
These CV inputs can be sent on independent MIDI Channels, for ex: Fills 1 to 4 on MIDI Channel 1 and Assign on MIDI Channel 2.

MIDI Controller:
All panel controls (9 knobs, 4 toggle switches and 11 push buttons) can be sent to MIDI Out as CC controls as any standard MIDI controller. The individual CC numbers can be configured through the Configuration Menu.

MIDI to Gate:
All 4 Gate outputs can be controlled/sequenced from an external MIDI device.
For ex: we can configure Gate 1 to be responsive to CC 1, Gate 2 to CC 2 and so on. Everytime CC 1 gets a value of 127 Gate 1 will be turned ON, if it gets a 0 value Gate 1 will be turned OFF.

MIDI Control:
All panel controls (9 knobs, 4 toggle switches and 11 push buttons) can be controlled/sequenced from MIDI CC controls. This allow full automation of the module via MIDI
The individual CC numbers can be configured through the Configuration Menu and includes a midi learn feature for easier configuration.
Also controllable via MIDI is the change of Presets and Modes.
Read more
MRP:$113.11
coming soon $109.60
FORTHCOMING
ADDAC System ADDAC603 VC Triple Bandpass Filter Module (black faceplate)
Cat: 776351
 
triple bandpass filter module
Notes: The ADDAC603 VC Triple Bandpass Filter provides three channels of bandpass filters, fantastic for sculpting complex sounds. Each of the channels feature a gain/distortion control with switch to select between x3 or x100 gain, which can cause the input signals to distort, adding another layer of harmonic interest.

The inputs are cascaded together to allow for one source to be filtered three different ways - or each filter can be used independently. The three filters also feature controls for frequency, which sets the cutoff point; width, which sets the width of the band that is being filtered; feedback, which at high settings causes the filter to self-oscillate, and level control, which sets the amplitude of the output. Frequency, bandwidth, and output level each have CV inputs with attenuverters.

A switch sets whether the filter is 24 dB or 12dB per octave. There are individual outputs with phase switch, plus a mix output and dry/wet output with adjustable control for mix balance. This module provides a wide variety of filtering options to add complex tonal shaping to your rack.

Tech Specs:

22HP
3.5 cm deep
250mA +12V
250mA -12V

Read more
MRP:$407.71
coming soon $393.46
FORTHCOMING
SynthRotek VCO Analog Voltage Controlled Oscillator Module (black faceplate) (fully assembled)
Notes: The VCO is an analog voltage controlled oscillator with a wide frequency range and 8 trackable octaves. It uses the Curtis CEM3340 reissue chip, which is famous for its outstanding sound quality. This is the fully assembled version of the VCO.

Specifications:
Width: 4HP
Depth: 53mm
Power draw:
+12V: 42mA
-12V: 31mA

Includes power cable and module screws.
Read more
MRP:$157.82 SAVE 19%
coming soon $128.22
FORTHCOMING
ADDAC System ADDAC215 Dual S&H+ Module (black faceplate)
Cat: 776254
 
dual sample & holds module
Notes: This new module should not be judged by it's size, at 6hp it's packed with features.

At its core it features a noise source and two precision Sample & Holds with 0.01% of maximum deviation from the Input which allows for quantized signals to be sent through without any noticeable detuning or the typical voltage drops over time.

The Sample & Hold sections can also be used as a Track & Hold meaning it holds the incoming input while the Trigger input is ON and lets the input flow to the output when the Trigger input is OFF.
Each section also features it's own slew processor with a single control over attack and decay and an ON/OFF switch.

The noise signal is normalled to both sections inputs, meaning that without a jack plugged into the Input the sample and hold function will act upon the incoming noise signal generating random CV values.

The [Trigger A Alternate] switch allows to Link both sections so that any trigger input in Trigger A will alternate between triggering the A and B section.

Besides each section outputs there's also 4 extra outputs: Noise, Difference, Average and Sum. The Noise output is coming from the noise source, the Difference output is the subtraction of section A minus section B, the Average output is the sum of both A plus B and then divided by 2 and finally the Sum output is the sum of both A plus B sections.

MECHANICAL:
Format: Eurorack
Width: 6 HP
Depth: 4 cm

ELECTRICAL:
Max current: +50mA/-50mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$142.04
coming soon $136.99
FORTHCOMING
ADDAC System ADDAC703 Discrete Mixer Module (black faceplate)
Notes: Here's the second module of ADDAC System's 700's Heritage Series.

Inspired by Moog CP3 mixer, this is a totally discrete analog mixer and it's not, by any means, your standard breakfast mixer, although it can behave like one.

This is a wolf in sheep's clothing. Despite its harmless looks there's a dark snarly soul behind that panel that wants to take your sounds into a realm of gritty gnarly growls.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 3 cm

Electrical:
. Max current: 60mA.
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.

Included:
.black screws
.black fibre washers
Read more
MRP:$203.86
coming soon $197.27
FORTHCOMING
Joue Water Guitar Pad For Board Play Modular MIDI Controller (blue, green)
Cat: 781799 Rel: 31 Oct 20
 
Pad for Play MIDI controller
Notes: 6-string guitar neck on 8 frets, water color scheme.
Read more
MRP:$46.03 SAVE 17%
coming soon $38.35
FORTHCOMING
Joue Water Keys Pad For Board Play Modular MIDI Controller (blue, green)
Cat: 781801 Rel: 31 Oct 20
 
Pad for Play MIDI controller
Notes: 17 keyboard keys, water color scheme
Read more
MRP:$46.03 SAVE 17%
coming soon $38.35
FORTHCOMING
Eurorack Hardware Modules ATT 2HP Triple Attenuator Eurorack Module (black faceplate) (fully assembled)
Notes: Get the most signal attenuation in the smallest 3U package possible! The ATT module features three independent IN - Attenuate - OUT circuits in one 2HP module. Works great for attenuating both audio and CV signals. Completely passive, so no current draw on your power supply.
Read more
MRP:$44.72 SAVE 17%
coming soon $37.26
FORTHCOMING
Eurorack Hardware Modules E-OR Selectable Gate Mixer Module (black faceplate) (fully assembled)
Notes: The E-OR is a passive 2HP 'selectable gate mixer,' which means that you can choose between two different gate sources, two trigger sources or BOTH using the three way switch per channel. Great for choosing between various rhythms, clocks, gates, etc. Perfect for manual fills and variation in your set! Matte black panel with white ink. The E-OR is diode protected, so combining two trigger or gate sources is what it is meant to do!
Read more
MRP:$44.72 SAVE 17%
coming soon $37.26
FORTHCOMING
Division 6 CEM3340 VCO Module (black faceplate)
Cat: 777957
 
VCO module
Notes: This Voltage-Controlled Oscillator is based on the Curtis CEM3340 IC.

Specifications:
Power supply: +/- 12V to 15 VDC
Power connection: Eurorack 10-pin shrouded header (Can hook wires to pin holes instead if not building for Eurorack)
Current draw: 9mA (+12V) / 6mA (-12V) / 0mA (+5)
Dimensions, main board: 50mm x 60mm
Eurorack HP: 4
Eurorack depth: 64mm
Read more
MRP:$157.82 SAVE 19%
coming soon $128.22
FORTHCOMING
Division 6 Business Card Synthesizer (fully assembled)
Cat: 777973
 
business card synthesiser
Notes: The Business Card Synthesizer is a tiny synth that can be connected to a Business Card Sequencer, other synth gear, or played by itself.

Headphones can be connected directly to the output of the synth, and there are plenty of knobs to play with, so you can easily make noises anywhere. Great for learning about synthesizers!

S&H Button: Enables Sample & Hold, which disables the external CV IN jack and uses LFO1 and LFO2 to determine oscillator pitch. LFO1 sets the sample rate (SHAPE is ignored for this), and LFO2 is the wave that gets sampled.

GATE Button: Manually turns on the gate so sound comes out of the synth. This control is momentary, but you can latch it on by tapping the S&H button while holding the GATE button down.

COARSE TUNE: Adjusts the pitch of the oscillator up or down in large increments

FINE TUNE: Adjusts the pitch of the oscillator up or down in fine increments

SHAPE: Changes the shape of the wave produced by the main oscillator (VCO). Turning this control fully CW gives you a triangle wave. Start turning it CCW takes you through sawtooth/ramp, then at about the 12:00 position you get a square wave. Continue turning it CCW and you get several higher duty cycle square waves
.
GLIDE: Adjusts the rate at which the pitch of the VCO takes to go between pitches (whether changed by the COARSE TUNE knob or CV IN). Fully CCW causes the pitch to react almost instantly, while fully CW makes it take its sweet time.

LFO 1 / LFO 2 SHAPE: Changes the shape of the waves produced by the low-frequency oscillators (LFOs). The shapes are similar to those of the VCO, except that the LFOs have sawtooth/ramp waves that go both up and down (since you can actually hear the difference at LFO rates).

LFO 1 / LFO 2 RATE: Controls how fast the LFOs go.

LFO -> VCO: Routes the two LFOs to control the pitch of the main oscillator. The 12:00 position is basically "off", and the LFOs have no effect on pitch. Start turning the control CCW and LFO1 starts changing the pitch of the VCO. Maximum effect is at about 10:00. Continuing to turn the control starts to bring in LFO2 as well. All the way CCW gives you full effect from both LFO1 and LFO2.

Turning the control CW from 12:00 does essentially the same thing, but brings in LFO2 first, then LFO1.

This might seem like kind of a weird control, but it gives you quite a bit of routing flexibility with one knob. You can have no pitch modulation, LFO1, LFO2, LFO1 with a little LFO2, or LFO2 with a little LFO1.

LFO -> VCA: Routes the two LFOs to control the amplitude of the oscillator. (See LFO -> VCO control description above for more information about how the control works.)

ATTACK: Controls how fast the audio amplitude fades in when the gate is triggered. CCW is fast and CW is slow.

DECAY: Controls how fast the audio amplitude fades out when the gate is released. CCW is fast and CW is slow.

VOLUME: Controls the overall volume of the signal coming from AUDIO OUT.

FILTER: Changes the cutoff frequency of an analog low-pass filter. Turn the knob fully CW and all frequencies (that you can hear) are let through. Start turning it CCW and the high frequencies start getting cut off, until the sound becomes muddy / muffled. Use in conjunction with the SHAPE control to get the tonal quality you are looking for.

Connections:
CV IN: Accepts a 1 volt/octave control voltage to control the pitch of the oscillator. It responds from about 0-5V, but voltages outside of this range won't cause damage. The CV input is quantized, so only valid (western scale) notes are played. This input is ignored when Sample & Hold is enabled.
GATE IN: A voltage greater than about 2.5V will turn on the gate and allow audio to come out the output of the synth.
AUDIO OUT: Connect to an amplifier or another synth. The jack has both the tip and ring connected, so you can even use stereo headphones and hear sound from both ears.
Power: Connect 7.5-15VDC to this 3.5mm TS jack to power the synthesizer. The tip is positive (don't worry, there's a protection diode in case you get it reversed). You can get power from a 9V battery, AC adapter, or you may even be able to find an output on your modular synthesizer that can provide enough current.

Specifications:
Power supply: 7-15VDC (reverse-polarity protected!)
Power connection: 3.5mm phone jack, center-positive
Current draw: 15ma
Dimensions: 3.5" x 2" (the same as a business card!)
Read more
MRP:$109.16 SAVE 19%
coming soon $88.76
FORTHCOMING
MST 4-Channel Audio / CV Mixer Module (fully assembled)
MST
Cat: 778011
 
4-channel audio/CV mixer module
Notes: The MST Audio/CV 4-Channel Mixer is a mixer and/or attenuator with mute switches per channel - a must for the performing modular artist.

Specifications:

Current draw: V+ max 13.25mA, V- max 7.35mA

Width: 8HP, Depth: 3.5 cm (1.88 in)
Read more
MRP:$151.25 SAVE 19%
coming soon $122.75
FORTHCOMING
MST Dual AD/ASR Envelope Module (fully assembled)
MST
Cat: 778041
 
dual AD/ASDR module
Notes: The MST Dual Envelope is a simple-to-use yet complex dual envelope generator. Channels 1 and 2 are both normalled to each other to cycle when the other respective channel hits end of cycle, allowing for really interesting ping-pong effects. Each channel also has an end-of-cycle trigger output with LED indicator. Thereis a normal and inverted envelope out. The inverted envelope out can be further modified by the +5 offset switch, which allows the inverted waveform to travel in the positive. The + output level allows the envelope signal to go between zero and the maximum voltage rail. Attenuate the output level down for a more subtle envelope (adjust to taste).

Specifications:
Current draw: V+ max 10mA, V- max 8mA
Width: 12HP
Read more
MRP:$284.08 SAVE 19%
coming soon $230.15
FORTHCOMING
ADDAC System ADDAC701.REV2 VCO Module (black faceplate)
Notes: This is our new VCO, we discontinued our ADDAC701 VCO a few years back and since we've been wanting to release a more stable version with better pitch tracking increasing pitch reliability further minimizing the detuning issues of analog VCO's.

For this new revision we chose to use the modern version of the CEM3340 ic from CoolAudio and add the triagle to sine circuitry of our previous VCO. This new version is extremelly stable over 7 octaves.

We also added a new Mix section which allows mixing of all waveforms controlled by 3 knobs SIN/TRI, MIX and SAW/RECT.

Tech Specs:
8HP
3.5 cm deep
60mA +12V
60mA -12V
Read more
MRP:$181.50
coming soon $175.36
FORTHCOMING
SynthRotek 1U Mattson Buffered Multiple Module (black faceplate)
Cat: 777875
 
buffered multiple module
Notes: The 1U Mattson Buffered Multiple is a PRECISION buffered mult that is perfect for 1V/O CV sources. A signal plugged into INPUT A will be available from all 8 OUTPUTS. Break the chain by adding a second signal into INPUT B; signal A comes out the 4 "A" outputs and signal B is available at the 4 "B" outputs.

Please note: Synthrotek's 1U products do not fit in Vermona or Intellijel cases.

Current draw: +12 18mA, -12 18mA
Width: 20HP
Depth: 32mm


Read more
MRP:$101.27 SAVE 19%
coming soon $82.19
FORTHCOMING
Analogue Systems RS-380N Multifunction Dual Bus Module
Cat: 776869
 
dual bus module
Notes: Multifunction module containing LFO, sample and hold, noise and VCA. Incredibly versatile unit as well as excellent modulation controller when used in conjunction with Demon and Sorcerer and other analogue keyboards with mod wheel or joystick capabilities. Cost effective and rack space efficient. It has a new front panel design with elongated holes.

The RS-380N is a composite module comprising four separate ‘sub-modules’ that you can patch together or with other RS Integrator modules to generate and control a wide range of effects.

It is designed for use when space is at a premium, and combines a flexible Voltage Controlled Low Frequency Oscillator (VC-LFO) with a noise generator, a Voltage Controlled Amplifier (VCA) and a random signal (sample & hold) generator.

Voltage controlled LFO with two selectable frequency ranges: LOW goes from 0.3Hz to 6Hz and HIGH from 5Hz to 1.500Hz; using control voltages you can reach lower and higher frequencies, though. The CV input is not compliant to the 1V/octave characteristic. Two waveforms are available: square and triangle.

Analog noise generator that produces white noise.

Sample & Hold: due to normalized sockets you can use this sub-module without patching as the LFO´s square wave and the white noise are pre-patched. Alternatively you can insert other signals than the internal white noise through the Source In socket.

VCA: classic VCA with one signal input, two signal outputs and one CV input.
Read more
MRP:$253.83 SAVE 17%
coming soon $211.52
FORTHCOMING
ADDAC System ADDAC806 Bluetooth Audio Module (red faceplate)
Notes: This small module will allow you to send wireless audio signals from any bluetooth compatible device straight to your modular.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 4.5 cm

Electrical:
. Max current: 75mA on each rail
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
coming soon TBA
FORTHCOMING
ADDAC System ADDAC807C+ Individual Channel Stereo Outputs Module (black faceplate)
Notes: Dedicated expansion for the ADDAC807C VC Summing Mixer

Features 4 individual track post fader stereo outputs.

2Hp
2 cm deep
0mA
Read more
MRP:$68.39
coming soon $65.75
FORTHCOMING
ADDAC System ADDAC102 VC FM Radio Module (red faceplate)
Cat: 773955
 
FM radio module
Notes: This is Version 2 of this module, updated in order to be skiff friendly.

With the ADDAC102 FM Radio you'll be able to tune-in FM radio. Besides the ability of station broadcasts as sound generators for your synthesis, you can also have a lot of fun with the fact that its a great noise generator- the static picks up all kinds of great electromagnetic interference.

It provides controls like tune, volume and seek (all of them controllable through CV input) and there's two outputs for stereo sound.
Read more
MRP:$340.64
coming soon $327.71
FORTHCOMING
EMW MIDI Oscillator 103 Module (black faceplate)
Cat: 774608
 
MIDI oscillator module
Notes: The new EMW MIDI Oscillator 103 is a very practical module. It responds directly to MIDI signals and generates 3 waveforms: Sawtooth, Square, and Sub-oscillator. The sub-oscillator waveform features a unique sound characteristic, ideally designed to fit in the mix together with other waveforms. The MIDI learn function allows for an easy adjustment to any MIDI channel. The module also has an adjustable GLIDE control, PWM and frequency modulation with level adjust and Trigger/Gate outputs in order to activate envelope generators, sequencers, etc.
Read more
MRP:$178.87 SAVE 19%
coming soon $144.67
FORTHCOMING
EMW Voltage Controlled Filter S100 Module (black faceplate)
Cat: 774621
 
voltage controled filter module
Notes: The EMW VCF - S100 is a Roland style 24db/oct low-pass resonant filter. It's sound and response were designed to be as close to the System 100M filter as possible. This module has a 2-CH input audio mixer with individual input level control and two modulation inputs with individual input level control. Self-oscillation is very linear and ranges from 10Hz to beyond 20KHz.
Read more
MRP:$195.96 SAVE 21%
coming soon $154.54
FORTHCOMING
EMW Voltage Controlled Filter SH-5X Module (black faceplate)
Cat: 774625
 
voltage controlled filter module
Notes: EMW's version of the Roland SH-5 VCF
Read more
MRP:$224.90 SAVE 20%
coming soon $180.84
FORTHCOMING
EMW Voltage Controlled Filter MG24 Module (black faceplate)
Cat: 774633
 
voltage controlled filter module
Notes: The EMW VCF MG24 is a Moog style 24db/oct low-pass resonant filter. Its sound and response were designed to be as close to the Minimoog filter as possible. This module has a 2-CH input audio mixer with individual input level control and two modulation inputs with individual input level control. Self-oscillation is very linear and ranges from 10Hz to beyond 20KHz.
Read more
MRP:$213.06 SAVE 19%
coming soon $172.07
FORTHCOMING
EMW 200 Filter Module (black faceplate)
Cat: 774648
 
filter module
Notes: The EMW-200 Filter module is the same found on the EMW-200 synthesizer and its circuit is very similar to the one used on the old EML-200.These filters have a 6 db/oct attenuation curve and they sound amazing. No other filter can create a 'dark' sound atmosphere like these ones. It is a great addition to any modular synthesizer setup, specially for those designed to work with sound design and electronic music.

Read more
MRP:$96.01 SAVE 19%
coming soon $77.82
FORTHCOMING
EMW VCO102 Analog Voltage Controlled Oscillator Module (black faceplate)
Notes: The EMW VCO 102 is a Voltage controlled oscillator with two waveforms (SQUARE and SAWTOOTH) that incorporates all analog technology. Its transistor core circuit design guarantees a vintage and powerful sound. This oscillator was designed to produce very precise waveforms and have a good stability and 1V/octave frequency tracking over five octaves.
Read more
MRP:$164.40 SAVE 23%
coming soon $126.04
FORTHCOMING
EMW Analog Noise 3X Module (black faceplate)
Cat: 774774
 
noise generator module
Notes: The EMW ANALOG NOISE 3X module is a classic noise generator that uses all analog circuitry to produce a dense and pure noise sound. It's transistor based thermal noise source works by amplifying the little thermal noise generated by the random movement of atoms on the semiconductor junction. This method guarantees a totally random noise source like the ones used by vintage machines.
Read more
MRP:$90.75 SAVE 23%
coming soon $70.14
FORTHCOMING
EMW VC Wavetable LFO Module (black faceplate)
Notes: The EMW Wavetable LFO is a very useful module for generating complex modulation signals. It has an exclusive selection of 31 internal waveforms, ranging from simple waveforms to noises, rhythmic and asymmetrical shapes.
Read more
MRP:$209.12 SAVE 22%
coming soon $163.31
FORTHCOMING
EMW Voltage Controlled Low Frequency Oscillator Module (black faceplate)
Notes: The EMW VC LFO is a low frequency oscillator module with 4 waveforms: SINE, TRIANGLE, SAWTOOTH, and SQUARE (with pulse width control). You can use it to alter the frequency or the pulse width of a VCO, change the VCA amplitude to produce vibrato effects or in any other modules modulation input to alter its ehavior over time. This is a very useful module and a great tool in any modular setup.
Read more
MRP:$124.94 SAVE 19%
coming soon $100.84
Artículos del 1 al 50 de 544 en la página 1 de 11
1  2  3  ...  11  »

Filter

Coming Soon: Studio Equipment
Close