100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

Inicio  Coming Soon  

Studio Equipment

Options
Artículos del 1 al 50 de 129 en la página 1 de 3
1  2  3  »
FORTHCOMING
Empress Effects Zoia Modular FX Synthesiser Pedal
Cat: 783109 Rel: 30 Sep 20
 
Synthesiser pedal
Notes: The ZOIA is basically a modular synthesizer in pedal form. Instead of being a delay effect or tremolo, the ZOIA provides the modules necessary to build a delay or tremolo from the ground up. But since you're the one building it, you can make it do whatever you want. With the ZOIA you can build your own custom effects, synthesizers, midi controllers, and virtual pedal boards. And to make life a little easier, these modules have been created for all your standard guitar effects. So for instance, if you want a phaser, you can just plop down a phaser. You don't have to break out the textbooks to learn that they're built out of all-pass filters. (Of course, if you're a nerd like us, you can use the ZOIA to build them out of all-pass filters).

Input Impedance: >= 1M ohms
Output Impedance: 100 ohms
Frequency Response (-3dB): 10Hz - 23.4kHz
Total Harmonic Distortion: 0.22%
Dynamic Range: 105.5 dBA
Input Headroom (no pad): +0.5 dBu
Input Headroom (6dB pad): +5.7 dBu
Input Headroom (12dB pad): +10.8 dBu
Output Headroom: +16.2dBu
Power Input Connector: 2.1mm Barrel Connector
Power Input Voltage: 9V DC (center negative)
Required Current: 300mA
Height (enclosure only): 1.75"
Height (including controls): 2.625"
Length: 5.7"
Width: 3.75"
Weight: 1.5lbs
Read more
MRP:$627.46 SAVE 17%
coming soon $522.87
FORTHCOMING
Nux Optima Air Acoustic Simulator & IR Loader Pedal
NUX
Cat: 778748 Rel: 31 Aug 20
 
acoustic guitar simulator/IR loader pedal
Notes: The Optima Air pedal is a programmable digital modelling acoustic guitar simulator for electric players. Plug in your electric guitar and morph it into any of 15 internal acoustic guitar models at will. An Impulse Response (IR) loader enables you to capture the tone profile of your favourite acoustic guitar and store it as a model that can be played from your electric guitar. To enhance the acoustic tone, the Optima Air is furnished with a foot-switchable studio quality preamp with 3-band EQ and a digital reverb section to generate ambience. The Optima Air also has an audio streaming USB interface providing, which can be used as a recording device and the USB can be used for remote editing via software which is downloadable for PC or Mac computer. Inputs and outputs include standard jack in and out, a D.I. XLR output, send/return effects loop, headphone output and aux line input for a myriad of connection possibilities. Optima Air is the acoustic guitar in a pedal for electric players either on stage or in the studio.

Power supply: 9Vdc, 500mA, negative centre (not supplied)
Sampling format: 24-bit, 48-kHz
Internal programmes: 15 models, 9 preset patches
DI output: XLR
USB computer interface: Micro USB port

The box for this item contains :

Optima Air pedal
Read more
MRP:$207.84 SAVE 17%
coming soon $173.20
FORTHCOMING
TC Electronic Brainwaves Pitchshifter Pedal
Cat: 781362
 
Pitchshifter pedal
Notes: Exceptional pitch shifter with studio-grade algorithms, 4 octave dual voices and groundbreaking MASH footswitch.

With its mind-bending range and kaleidoscopic pitch effects, the studio-grade BRAINWAVES PITCH SHIFTER is the perfect fusion of brains and brawn.

This pink-clad pitch professor masters a variety of polyphonic effects including whammy and detune, plus a bunch of others - thanks to the dedicated TonePrint app.

The award-winning MASH footswitch packs expression pedal performance into a pedalboard-friendly size.

Pitch-shifting mode expands your sound by adding up to two extra voices and letting you decide whether these voices go above or below the original signal.

Just imagine - the solo from "Owner of a Lonely Heart" never sounded so huge.

And since BRAINWAVES is polyphonic, you can use it on your standard-tuned guitar for a wide range of rock-solid sharp or flat tunings - without detuning the actual instrument.

With separate voices pitched in either direction, the polyphonic algorithm lets you easily process pitch-shifted chords, riffs, and furious flurries of single-notes. Since each voice is adjustable from unison to two octaves up or down (and anything in between), BRAINWAVES has more range than an interstellar battle cruiser. You can quickly create custom pitch settings via the free TonePrint app to find or expand your own pitch personality.

Whammy mode packs a powerful fistful of sonic punch. With 2 individually programmable voices, you can instantly go from nice and sweet, to a 2-octave, dive bomb explosion - just by MASHing the footswitch.

Detune mode lets you widen your sound for a more open, sweet and dynamic tone. Unlike most chorus effects, detuning plays really well with complex chord voicings, even those drenched in distortion.

BRAINWAVES also nails the squeaky clean, watery '80s tones we all know and love. Or slap on some dirt and dial up a shallow detune for the secret thickening agent from Van Halen's post-1984 tone. MASH down the footswitch for an extra dose of instant detune goodness; the Mix knob lets you blend in just the right amount of effect, keeping your sound balanced - even at extreme settings!

The BRAINWAVES PITCH SHIFTER features groundbreaking new technology that brings a wide range of creative expression to the party, controlled solely by how much pressure you apply to the depressed footswitch.

Years in the making, and only available in select TC Electronic products, this clever innovation elevates the common footswitch well above rather mundane duties, such as "On" and "Off". More importantly - MASH elevates your performance to the next level.

TonePrint means signature effects - and signature effects means truly creative tones.

With optimized headroom, True Bypass or Buffered Bypass switch and Kill-Dry on/off, this pedal guarantees optimal tonal integrity and zero loss of tone. And, no matter if the pedal is on or off your precious dry sound is always passed through the pedal unharmed in all it's pure analog glory due to an Analog-Dry-Through.

Download the free TonePrint app for Android and iPhone, choose the TonePrint you want to hear and beam it instantly from your phone through your guitar's pickup into your TonePrint pedal. No cables needed!
Read more
coming soon $122.00
FORTHCOMING
Empress Effects Reverb Pedal
Cat: 783099 Rel: 30 Sep 20
 
Reverb pedal
Notes: Realistic simulations of spaces, as well as never-before-heard surreal ambiances are represented with stunning sound quality. Sporting stereo ins and outs, a small footprint and all the controls at your finger-tips, it strikes the perfect balance of control and ease of use, avoiding laborious menus. Presets, the versatile control port, and MIDI open up a world of possibilities for live performances. Whether you're looking for a classic spring, realistic room or new sonic flavors to expand your creativity, this pedal delivers. And....it's got a beer mode!

The pedal has 12 algorithm types, some include multiple variations. For example, vintage and studio plate, dark and bright springs. Also, as more algorithms get added you can update your pedal via the SD Card. It's the pedal that keeps on giving.

Pristine sounding classic hall, plate, spring and room sounds that rival or surpass studio units costing many times more.

A complete palette of tweak-able ambient sounds that offer the creative player so much territory to explore and make their own.

All the algorithm controls are sitting on a knob in front of you, no fiddling through laborious menus.

Many algorithms have infinite hold settings or the ability to tap in delay time.

Features a signal to noise ratio of >104dB and maintains an analog dry path.

Settings can be saved to 35 presets. With three stomp switches, accessing the presets is easy.

Bank style or scrolling style preset modes.

It can be configured to run with true bypass or buffered bypass if you want to hear trails.

3 variations to choose from, perfect for recording, practicing or for gigs without an amp.

Get hum-free operation when operating in stereo with two amps. Output 2 is isolated with a transformer to eliminate nasty ground loops.

48kHz sampling, with 24 bit conversion and 32 bit internal processing.

Dry signal is left untouched, and blended with the wet signal using VCA. (no zipper noise, hooray!)

The Universal Control Port allows you to connect an expression pedal, external tap switch, control voltage, external audio input and MIDI - all using a standard 1/4" jack!

The Advanced configuration menu lets you configure how your reverb works. Select from true or buffered bypass, 0-35 presets, MIDI configuration, Control port control(expression pedal, external tap, control voltage and MIDI) as well as which style of preset system to use, input signal pad, output transformer enable and more!

The enclosure measures approximately 5.7" by 3.75" by 1.75", which is delightfully small when considering all the features packed into this unit.
Read more
MRP:$601.31 SAVE 17%
coming soon $501.09
FORTHCOMING
Electro Harmonix Oceans 12 Dual Stereo Reverb Pedal (B-STOCK)
Cat: 785510
 
B-STOCK: Box damaged, product unused & in perfect condition
Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


The Oceans 11's big brother with even more reverbs and functionality. It features two simultaneous, independent, stereo reverb engines, series and parallel control for the dual reverbs, 24 presets and advanced I/O allowing for stereo in/out or mono send/return with pre and post reverb options. The pedal also includes a new Tide Control for stereo image alteration, a Lo-fi Control, an infinite attenuation control and an input jack for external expression and 3-button footswitch control.

A Tails switch provides a choice of whether the reverb effect fades out naturally or stops immediately when the pedal is switched to bypass. In most settings the pedal is also capable of producing infinite reverb which can be played over with a different reverb effect. Comes equipped with a standard EHX 9.6DC200mA power supply.

The Oceans 12's reverbs are: ROOM, SPRING, PLATE, REVERSE, ECHO, TREM, MOD, DYNA, AUTO-INF, SHIMMER, POLYPHONIC, RESONANT
Read more
coming soon $217.86
FORTHCOMING
Keeley Abbey Verb Vintage Chamber Reverb Pedal
Cat: 782285 Rel: 25 Sep 20
 
Reverb pedal
Notes: Keeley Abbey Verb Vintage Chamber Reverb Pedal
Read more
MRP:$194.77 SAVE 17%
coming soon $162.32
FORTHCOMING
Miditech MP-1 Sustain Pedal
Cat: 784475 Rel: 10 Oct 20
 
Sustain pedal
Notes: The MP-1 is a strong pedal, which has a long switch, and works nearly wihout own noises. Because the polarity is switchable, it is not only compatible to Miditech masterkeyboards, but also it works with all usable master- and MIDI-keyboards from all other companies with a standard sustain input jack socket.
Read more
MRP:$23.53 SAVE 17%
coming soon $19.59
FORTHCOMING
J Rockett Blue Note Tour Series Subtle Overdrive Pedal
Cat: 783205 Rel: 01 Oct 20
 
Overdrive pedal
Notes: The Blue Note Tour Series is exactly what you think a small, compact version of the current production Blue Note. The Blue Note Tour Series is identical in sound to the original Blue Note, but does not offer the Hot Switch option.

The Blue Note Tour Series is designed for the touring musician with a rugged, steel enclosure and the new Speed Switch system. You can live in the jazz/blues world all day long with the Blue Note Tour Series always engaged.

The Blue Note gives you a very woodsy blues overdrive feel and can achieve more gain than a typical tube screamer (no this isn't another TS clone just using this as a reference). With the newly added Hot switch the pedal is capable of multiple tones. The Hot switch adds more gain, more volume and gooses the low mids for a thick juicy feel. The Blue note can be set to run flat in its EQ section or select the Hot position for more prominent mids. Since the Blue note can be run in either position it makes it suitable for many applications. This pedal is all about feel and really works well with any guitar/amp combination.

Dimensions: 4.00" x 2.30"

9 volt Negative tip adaptor and a 5.5mm x 2.1mm jack.

9 volt Battery

True Bypass
Read more
MRP:$260.13 SAVE 17%
coming soon $216.77
FORTHCOMING
SynthRotek Cosmic ECHO Delay Pedal (fully assembled)
Cat: 778344
 
delay pedal
Notes: The Cosmic ECHO is an analog-sounding lofi delay that will work with just about anything you plug into it. The dark, lush, moody tones of the ever-popular PT2399 IC provide an out-of-this-world experience. This new take on this classic pedal pushes the chip's limits so you can explore all the gritty elements drifting at the edge of long delay rates. It already outperforms other bucket brigade style echoes, but just to be sure, we added 2 momentary switches, Zone and Warp.

Contains PT2399 IC, a bucket brigade style emulation. This IC has 16-bit sampling for 30-300 milliseconds. After that, the sample rate goes down in relation to the delay length. This results in artifacts and noise being introduced into the audio for weird, cosmic, psychedelic sounds.

Read more
coming soon $102.39
FORTHCOMING
SynthRotek Cosmic ECHO Squared Analogue Delay Pedal (fully assembled)
Notes: The Cosmic ECHO Squared is an analog lofi delay that will work with just about anything you plug into it. The dark, lush, moody tones of the ever-popular PT2399 IC provide an out-of-this-world experience. This pedal pushes the chip's limits so you can explore all the gritty elements drifting at the edge of long delay rates. It already outperforms other bucket brigade style echoes, but just to be sure, we added 2 momentary switches, Blast and Warp.

Contains PT2399 IC, a bucket brigade style emulation. This IC has 16-bit sampling for 30-300 milliseconds. After that, the sample rate goes down in relation to the delay length. This results in artifacts and noise being introduced into the audio for weird, cosmic, psychedelic sounds.

This big sister of the Cosmic ECHO is tailored to live guitar and keyboard performers. It has all the features of the original plus:

- Expression pedal input over Rate

- Blast and Warp are now momentary stomp switches

- Blast amount knob now accessible externally
Read more
MRP:$213.07 SAVE 19%
coming soon $173.19
FORTHCOMING
Old Blood Noise Fault Overdrive V2 Distortion Pedal
Cat: 782132 Rel: 24 Sep 20
 
Overdrive/distortion pedal
Notes: Tweaking the platform of their Fault overdrive/distortion, Old Blood Noise have carved out room for greater gain range, voice control, and clipping options in the Fault Version 2. The Fault remains a great overdrive with footswitchable second gain stage and three band EQ, and now excels as a clean boost and tweakable high gain distortion as well.
Read more
MRP:$247.06 SAVE 17%
coming soon $205.88
FORTHCOMING
Old Blood Noise MAW Microphone Effects Manipulator Vocal Pedal
Cat: 782148 Rel: 24 Sep 20
 
Vocal manipulator pedal
Notes: What began as a simple request for a vocal version of an Old Blood effect spiraled into a multi-function device with 10 new effects, versatile in/out and send/return sections oriented toward any instrument you want to throw at it, and ample control over all elements. It's the new multi-tool for effects lovers on stage and in studio.
Read more
MRP:$325.49 SAVE 17%
coming soon $271.24
FORTHCOMING
Old Blood Noise Minim Reverse Modulated Delay/Reverb Pedal
Cat: 782151 Rel: 24 Sep 20
 
Delay/reverb pedal
Notes: Looking back on an inspiring year of collaboration with Datachoir, Old Blood Noise Endeavors created Minim, a new pedal built from the foundation laid out by Rever. Inside is a newly voiced reverb with harmonic tremolo, a modulated delay with nearly infinite repeats available, and a reverse section selectable between normal speed or double speed. Sat next to the Rever, it's like a long lost sibling. Put both on your board and see how well they get along.
Read more
MRP:$286.28 SAVE 17%
coming soon $238.56
FORTHCOMING
KMA Audio Machines Cirrus Delay & Reverb Pedal With Tap Tempo & Modulation
Cat: 782222 Rel: 25 Sep 20
 
Delay & reveb pedal
Notes: Floating above your head, delicate and elusive yet dreamy and sweeping. Always in motion until it dissolves and merges with the all immersive atmosphere around it. Just close your eyes and let the KMA Audio Machines' Cirrus Delay and Reverb carry you across the open sky, onto its sonic cloudscapes.

Cirrus is KMA Audio Machines' first step into the fully digital realm. But KMA have come up with a special and versatile, dynamically modulated combined Delay and Reverb pedal that will forever change your perception of time and space.

Made up of a Delay side and a Reverb side, both sides of Cirrus sport the most important basic controls such as Time (up to 1.5 sec). Repeats for the Delay and Decay and Damp for the Reverb. Plus, each side has its own mix control as well. So far so good, but now it's time to jump down the sonic wormhole!

This little Spatial-Temporal Modifier gives you three different Delay AND Reverb modes, which all sport a special dynamic feature that is controlled by your picking attack. This enables you to create sounds that are certifiably out of this world! To set the sensitivity of how the sound reacts, every section has its own sensitivity control.

The different Delay and Reverb modes cover vastly different modulated areas.

Modulated Delay Mode (MOD) fluctuates the Delay signal for a dynamic dancing tape echo-inspired modulation that'll deliver everything from subtle sways, to crazy pitch-bends. The Sample & Hold Mode (S/H) adds a sequencer-like filter in front of the Delay line, perfect for synthy textures. Play softly for subtle filter action or hit it hard for more pronounced electro-vibes. The third Delay Mode (OCT) blends in a high octave as your notes decay for unique shimmery dimensions, shining through like tiny stars in the cloudy night sky.

Over to the Reverb section, Modulated Reverb Mode (MOD) will decorate your trails with silky smooth movement, whereas the two other Modes deliver either an opening Low-pass Filter (LP) or a closing High-pass Filter (HP). The harder you pick the more the Low-pass will open up and bring in those shimmering highs, as if you're opening and closing portals to far away galaxies simply through your playing. Contrary to that, the closing High-pass will cut your lower frequencies when picking harder which will create cool lo-f textures. However, the ambient party doesn't stop here!

A big part of creating a signature sound comes from your pedal order and we know that a lot of you like to get creative there. Well, the Cirrus obliges! Set the Order Toggle to "Reverb" to run the Delay into the Reverb or flip it to "Delay" to switch it the other way - either direction will give you worlds of inspired soundscapes. You even get another Toggle Switch to set the Delay Tap subdivision, so you can get the right rhythms rolling fast. Toggles are awesome!

Now, on to the footswitches - Tap-Tempo on the left (neat!) and the much-needed Bypass Switch on the right (classic!). But wait, we actually made these stompers cool - the humble Bypass and Tap-Tempo Switches are suddenly full of additional creative secrets!

Besides the standard latching mode, the Bypass Switch offers some cool, yet creative and simple to use options. When the pedal is off, you can engage the pedal momentarily by holding the Switch down for sudden bursts of ambience. When the pedal is on though, holding down the Switch maxes out the Decay, jumping you straight into infinite reverb wonderland. You can also hold down the Tap-Tempo Switch to max out the repeats for infinite echoes. Plus, you can even hold down BOTH at the same time to enter an endless cascading dream state!

The Cirrus has been equipped with an Expression Pedal input (standard TRS connection) and a Selector Switch, giving you complete hands-free control over whatever key parameter of Cirrus you want. In addition, an internal switch can turn the Reverb and Delay trails on or off to taste, plus the individual Reverb and Delay mix controls help to tailor your sound exactly as you see ft.

As the final piece of the tonal puzzle, a Serial FX-Loop was added, letting you put any pedal in front of the Delay/Reverb line, to further flavour your own signature sound.

Powered by an optional standard 9V DC (max.) PSU (negative center, 2.1mm, approx. 220mA current draw)

Every pedal is designed, assembled, silkscreened, tested and numbered by hand in our small workshop. We use external manufactured PCBs to guarantee our high quality standard and keep the price of our pedals reasonable. The use of an indestructible powdercoated die-cast enclosure ensures a maximum durability.
Read more
MRP:$228.76 SAVE 17%
coming soon $190.63
FORTHCOMING
Old Blood Noise Signal Blender Parallel Effect Blender/Mixer/Router Pedal
Cat: 782163 Rel: 24 Sep 20
 
Effect blender/mixer/router pedal
Notes: The Signal Blender provides a number of parallel routing solutions through its use of a pair of send/returns, primary input and output, switching, and volume control.

Signal Blender can be used as a:
Parallel effect blender
3-to-1 mixer
1-to-3 splitter
Active ABY in either direction
Volume level setter

and more.

A courtesy 9V power outlet and phase correction switches for both Sends add further versatility to this box. Clever switching allows for latching or momentary on/off action.

The Signal Blender uses standard 9V center negative power, and has a current draw of 31 mA.
Read more
MRP:$155.56 SAVE 17%
coming soon $129.64
FORTHCOMING
Fulltone OCD Candy Apple Red Limited Red Edition of the Obsessive Compulsive Drive Pedal
Cat: 782854 Rel: 26 Sep 20
 
Obsessive compuldive drive pedal
Notes: Limited Red Edition of the Obsessive Compulsive Drive Pedal.
Read more
MRP:$220.92 SAVE 17%
coming soon $184.09
FORTHCOMING
Hungry Robot The Wardenclyffe Lo-Fi Modulator Pedal
Cat: 780914 Rel: 17 Sep 20
 
Modulator pedal
Notes: The Wardenclyffe is a lo-fi ambient modulator. It emulates the magical lo-fi textures of early audio recordings.

Inspired by Nikola Tesla's Wardenclyffe Tower, the pedal attempts to capture the essence of one of the most mysterious and odd scientists of the century.

The Wardenclyffe wears many hats: it is a pitch modulator, vintage low pass, high pass filter, & ambient pad reverb.

Depending on knob positions, it can be used subtly as a vibrato, chorus, or pad reverb... or by cranking the filter, depth, and wet knobs you can get into extremely nauseating lo-fi territory.

All elements combined, it provides all the tools you need to get that beautifully broken lo-fi texture you've been dreaming of.

Knob and Switch Description
WET: Controls volume of wet signal. At full turn, this goes above unity gain.
DRY: Controls volume of dry signal. At full turn, this matches unity gain.

HP/LP: Switches between High Pass Filter (UP) and Low Pass Filter (DOWN)

FILTER: Blends between filtered signal and clean signal. Filters have a fixed cutoff frequency.
PAD: Switches on a "below-the-mix" ambient reverb that sits just at the edge of infinite sustain.

LFO/GLITCH: Selects modulation source for pitch-bending. LFO is a standard SINE wave. Glitch is a how a SINE wave acts after a few drinks.
DEPTH: Controls the depth of the pitch-bending modulation.
SPEED: Controls the speed of the pitch-bending modulation.

Switching: True-Bypass

Current Draw: 105mA

Dimensions: 4.7" x 3.7" x 1.96"

Powering: 9V DC - Negative Center - 2.1mm Barrel
Read more
MRP:$267.98 SAVE 17%
coming soon $223.31
FORTHCOMING
Empress Effects Tape Delay Pedal
Cat: 783102 Rel: 30 Sep 20
 
Tape delay pedal
Notes: Rich, lush tape delay in an incredibly small box. 3 flavors of tape age let you choose how dark and gritty the repeats will get while filter and modulation controls allow for even more fine tuning. Tap tempos with ratio multiplier mean rhythms like dotted eights are all at your fingertips.

Now with an analog dry path, the Tape Delay is packed with features, all accessible from the advanced configuration mode. Presets can store all your settings and be recalled at the touch of a button, making switching live fast and easy.
Read more
MRP:$346.41 SAVE 17%
coming soon $288.67
FORTHCOMING
Hungry Robot Clockable LFO Desktop Module
Cat: 780980 Rel: 17 Sep 20
 
LFO module
Notes: The Clockable LFO brings multiple waveforms, CV control, subdivisions, and wave symmetry in a simple, user friendly package. LFO speed can be controlled by the tap tempo pushbutton, clock input, or over-sized Speed knob. There are three waveforms that can be selected by toggle and further modified by the Level and Symmetry knob. The Symmetry knob shifts the wave form from a symmetrical wave to a ramp up or ramp down waveform (or when using square wave, acts a pulse width control). Clock In and Clock Out for syncing with other devices. All knobs on the Clockable LFO can be manipulated with CV. As with all Hungry Robot "Modular Boxes" the Clockable LFO can be powered with a simple 9V DC, Negative Center power supply.

KNOBS
-SPEED: Sets the overall speed of the LFO. Turning this knob will override any tap or clocked tempo. This control is still affected by subdivision.
-LEVEL: Sets the level of the LFO output. Ranges from 0-10V peak-to-peak
-SYMMETRY: Sets the symmetry of the waveform. Shifting from ramp-down to ramp-up on triangle and sin waves. Adjusts pulse width on square.

SWITCHES
-SUBDIVISIONS: Selects subdivisions (x1,x2,#2). Automatically converts LFO speed.
-WAVESHAPE: Selects the waveshape of the LFO output (Sin, Triangle, Square)

PATCH POINTS
-SPD CV: CV input for Speed. Allows for CV control of this parameter.
-SYM CV: CV input for Symmetry. Allows for CV control of this parameter.
-LVL CV: CV input for Level. Allows for CV control of this parameter.
-CLK IN: Will sync to external clock. Will override the speed knob.
-CLK OUT: Outputs a 5V clock signal at 50% duty cycle. Can also be useful as a gate signal for your ADSR
-LFO OUT: Two outputs of final waveform. Both outputs are buffered for minimal signal attenuation. 10V Peak-to-Peak

PUSHBUTTON
-CENTER PUSHBUTTON: On-board tap tempo. Will override the speed knob.

Dimensions: 4.7" x 3.7" x 1.96"
Power: 9V DC - Negative Center - 2.1mm Barrel
Read more
MRP:$184.32 SAVE 17%
coming soon $153.58
FORTHCOMING
J Rockett Dude V2	Loud Dumble Inspired Overdrive Pedal
Cat: 783208 Rel: 01 Oct 20
 
Overdrive pedal
Notes: The DUDE is designed to achieve the classic D style ODS sounds and feel. From Robben Ford to Larry Carlton to scorching gain, it is all there. The Dude v2 has a less aggressive volume control, new knobs that are easier to read and a noiseless foot switching system.

Dimensions: 4.00" x 2.30"

9 volt Negative tip adapter and a 5.5mm x 2.1mm jack.

Analog 18mA Current Draw

True Bypass Switching
Read more
MRP:$260.13 SAVE 17%
coming soon $216.77
FORTHCOMING
Maxon AD-9 PRO Analog Delay Nine Series Pedal
Cat: 783311 Rel: 02 Oct 20
 
Analogue delay pedal
Notes: The AD-9 Pro model improves on one of Maxon's most coveted models in order to produce the best-sounding, most reliable analog delay ever. Featuring 4 of Maxon's proprietary MC4107D bucket brigade IC's, and the world's first RMS level sensor and companding noise reduction system, the AD-9 Pro delivers 450 millseconds of the most transparent analog delay sound ever available in a stompbox format.

Offering improved headroom, the AD-9 Pro can accept any input signal and will work in an amplifier's effects loop as well as its front-end.

The AD-9 Pro also features a switchable multi-head tape echo simulator function. This feature provides interesting new delay effects such as the "Ping Pong" repeats made famous by Tape Echo units as well as ambient effects that recreate the echoes of a large concert hall with stunning accuracy.

AD-9 Pro is outfitted with mechanical true bypass switching on both wet and dry outputs by use of a 4PDT switch assuring pure, unaltered tone when bypassed.

In a world that grows more "digital" by the day, the Maxon AD-9 Pro sets a new standard of analog innovation and audio purity.

"If you want a delay pedal with rich tone and a ton of vibe get a Maxon AD-9 Pro! I love the ability to switch from single to dual head delay modes." - Devin Bronson - Guitarist with Avril Lavigne

"Maxon pedals are just simply amazing. Thanks for making pedals that just sound great, all the fucking time!" - Tyler Connolly - Theory of a Deadman

TECH TALK:
The AD-9 Pro starts with a string of low gain, low voltage op amps designed to boost the signal and shape the sound without adding distortion. Signal then passes to a THAT4315s Compander - a precision low voltage, low noise Compander IC designed to boost signal while killing any noise. This IC brings the input signal up to an ideal level and keeps it there as notes decay. This is good for signal-to- noise ratio and also gives the delay chips a clean, strong signal to work with.

The 4 x Maxon MC4107D BBD delay IC's are controlled by two clock driver IC's. The driver is running the BBDs at a very low clock rate to achieve maximum delay time. This rolls off a fair amount of high frequencies, giving the AD-9 a big, warm delay sound.

The delay circuit has a switchable tap that grabs midstream delayed signal and adds it back in with the main delay signal. This setup is very reminiscent of the multi-head feature on vintage tape echoes (Roland Space Echo, etc.).

Both the tapped and untapped signals are sent through their own sets of filtering op amps (3 apiece) which help get rid of clock noise and hiss. Then the signal is sent through another THAT4315s Compander chip and into a mixing Op Amp (where the clean signal is mixed with the delay) and out.

The AD-9 Pro features Mechanical True Bypass switching on both outputs via a Fujisoku 4PDT switch.

NOTE ON POWERING THE AD-9 Pro - this pedal's voltage regulator IC requires a high inrush current of approximately 2000 mA upon startup. When using with a Power Brick such as the Voodoo Labs Pedal Power 2+, this pedal should be connected to a high current power jack when possible.

If it is not possible to connect to a high current jack, you can power the AD-9 Pro by leaving a battery in the pedal. Upon initial start-up, unplug the external DC power input cable, engage the pedal, and then plug the DC power input cable back in - the pedal will now power up normally off the external power supply until you power down your pedalboard.

Input Impedance: 500K Ohms

Output Impedance: 10K Ohms

Residual Noise: -100 dB or less (IHF-A)

Delay Time: 20 mSec to 450 mSec

Equivalent Input Noise: 116 dB or less (IHF-A)

Controls: Delay Time, Feedback, Delay Level

Switch: Single/Dual Mode, Effect

Operating Voltage: 9V

Power Consumption: DELAY TIME MIN 39mA/DC.9V 38mA/DC.10V

Dimensions: 74 mm (W) x 124 mm (D) x 54 mm (H)

Weight: 80 grams (including battery)

Battery: 9V battery (6LR61 or 6F22) x 1 or Maxon AC adaptor

Battery Life: Manganese dry battery more than 2 hours 25deg C / 77deg F (Panasonic 6F22NB) Alkaline dry battery more than 8 hours 25deg C / 77deg F (Panasonic 6LR61G)
Read more
MRP:$312.42 SAVE 17%
coming soon $260.36
FORTHCOMING
Old Blood Noise Expression Slider Portable Expression Fader
Cat: 782128 Rel: 24 Sep 20
 
Expression slider pedal
Notes: The Old Blood Noise Endeavors Expression Slider is a fader for use with any pedal that has an Old Blood style expression input (see details below). Simply use a TRS cable to plug the Expression Slider into the Expression input and use the slider as you would a knob or expression pedal. Suggested uses: strap it to your mic stand to adjust your favorite setting without bending down, keep it at your studio console to control a parameter while tracking, use the indicators to mark your favorite settings, or simply replace a knob control with a slider because let's face it: sliders are cool. Unsuggested uses: Unintended excess weight from use with foot while standing may cause damage to the device. Read: Don't use your foot.

Details: the Expression Slider uses a TRS jack with tip connected to the wiper of a 100K slider. Old Blood Noise confirmed that it works with all their other products, as well as pedals from Chase Bliss, Meris, Earthquaker Devices, Empress, Montreal Assembly, Strymon, EHX, and Boss. It will not work with TS style expression inputs such as Line6 without an additional TRS splitter cable.
Read more
MRP:$64.05 SAVE 17%
coming soon $53.37
FORTHCOMING
KMA Audio Machines Horizont Interdimensional Multispatial JFET Phaser Pedal
Notes: Jump into spaceship Horizont and begin your trek into star- filled galaxies, all while discovering the incredible vastness of the sounds created by this inter-dimensional multi-spatial stereo analog JFET Phaser. The unexpected is waiting for you behind the far away horizon and it will be a journey you'll never forget!

The Horizont's mission is to push way beyond the classic phasing sounds of yesteryear, and take you to uncharted phaser worlds the second you plug in. By combining lush analog JFET phasing with digitally controlled dynamics, Horizont creates a vivid and expressive modulation experience, all while providing experimental and creative features that'll kick phasing well into the 21st century.

Besides the more common phaser controls, the Horizont offers a plethora of new and exciting options for all the interstellar tone chasers out there. To greatly broaden the range of phasing tones available, KMA implemented a digital LFO with no less than eight different waveforms: Ramp Up/Down, Sine/Triangle/Square wave, a sweeping waveform, Sample & Hold and a random slope waveform going from 20s down to 40ms.

The implemented envelope generator is one of Horizont's absolute key features. It transforms your input signal into a control source to modulate the speed of the digitally controlled LFO or lets you manually phase for a resonant touch wah- like sound, depending on the state of the SWP- and SPURTCONTROL-Switch.

Set the SPURTCONTROL switch to LFO to let the SPURT knob adjust the internal phasing speed. However, by flicking the switch to ENV (Envelope) mode, it allows you to dynamically modulate the speed along the full LFO speed range, based on how loud the input source is (e.g. when you attack the strings hard). You can also combine the SPURT knob and the envelope by flicking the toggle to LFO+ENV where SPURT then sets the minimum speed. For even more control, you can even plug in an external expression pedal/CV-source (0-5V) to alter the minimum speed on-the-fly or you can use the TAP TEMPO switch (tap just twice) to set the speed to fit in with the tempo of your music.

The EXP-Mode switch also lets you choose between a manual phasing mode, controlled by an expression-pedal or an external CV source. Setting the EXP-Mode switch to the middle position will disable any external expression control.
The SWP (Sweep) switch lets you decide to use either the LFO or the envelope of your instrument signal to control the phasing.

The envelope can be set to upwards or downwards operation via the ENV switch, seeing the LFO either slowing down or speeding up, or flipping the orientation when phasing manually from lows to highs and vice versa. In conjunction with the FUEL (Sensitivity) and the DECAY controls, the envelope can be tailored perfectly to your needs.

The EMPH (Emphasis) mode from the original Astrospurt Phaser was kept, but have reworked and refined it extensively for the Horizont. The four toggle-switches determine the stage in which the phase-shifted signal is fed back into itself, while the REG (Regeneration) control sets the feedback amount. We also smoothed out the overall sound of the EMPH mode for a more pronounced, and crisp vocal-like tone. Each of the different switch variations and turn of the REG control will yield different results, seeing you discover new wild, fuzzy and noisy galaxies as you travel deeper down this sonic wormhole.

In order for you to levitate through spacetime, a stereo output has been added to the Horizont. You can switch between a standard stereo output or a panning output, via the STEREOPAN switch. Synchronized with the LFO speed, the upper cycle of the LFO sends the signal to the OUT1 and the bottom cycle to the OUT2. This is without a shadow of a doubt the most liquid and astonishing phasing experience you'll ever embark upon. But wait, there's more! Stop and take a deep breath, set the MIX control to fully clean and the Horizont is transformed into a Tremolo on-the-spot, with all the other aforementioned features.

Last but by no means least, the Horizont was equipped with an FX-Loop right in front of the phase-shifting line. This enables you to add your own secret sonic weapons to this spaceship, seeing you create your very own unique phasing sounds.The pedals' headroom was also increased drastically by boosting the internal circuit voltage to 18V, from the regular 9V input, to give the cleanest phasing possible no matter what instrument or line source you use.

But don't be fooled by all of these seemingly complex features, the Horizont is a super intuitive next generation phaser that'll see your tone take flight in seconds flat. Whether you are looking for traditional phasing sounds, experimental synthetic soundscapes or super dynamical sonic endeavours, the Horizont will have you covered to infinity and beyond.

Powered by an optional standard 9V DC (max.) PSU (negative center, 2.1mm, approx. 75mA current draw)

Read more
MRP:$325.49 SAVE 17%
coming soon $271.24
FORTHCOMING
Fulltone OCD V2 Obsessive Compulsive Drive Pedal
Cat: 782848 Rel: 26 Sep 20
 
Drive pedal
Notes: The OCD has received many slight tweaks since its birth in 2004, often incorrectly identified as version 2, Version 3, Version 4. In reality there has always been only one version- Version 1, with very slight variations in a couple of values after that making them V1.0 through V1.8. On 6/15/2017 we released a new OCD, different enough that it warrants a V2 designation, an explanation, and a trip to your favorite dealer to give it another listen. Not a subtle change when turned on- not a subtle change when turned off (in E.B. mode).

The OCD was the first pedal to use Mosfets as clipping devices. Another first was their configuration as "hard clippers connected to v-ref" instead of to ground, as was the norm. These things contribute greatly as to why the OCD has such touch-sensitivity...why they react so well when the strings are hit hard or soft, and why they sound & feel different than all other pedals out there, 90% of which are just slight tweaks of the Tube Screamer.

NEW FEATURE: output buffer (when pedal is turned on in True-Bypass mode, or always when in Enhanced Bypass mode) which eliminates it from being influenced by effects that came after it. Translation, your sound remains consistent regardless of placement in today's more complex signal-chains, loopers, and pedalboards. This buffer also had a positive effect on the sound, it reduced loading on the pedal's hard-clipping stage, allowing more sustain of both the sound and the overtones.

NEW FEATURE: Class A configured discrete 2N5457 JFET input section, raising the input impedance to 1 mega ohms (previously 330K) and increasing the dynamics- resulting in significantly better interaction with both single coil and humbuckers.

NEW FEATURE Internal switch to choose between Enhanced Bypass & True-Bypass, and with no popping sound in either mode. No other company offers EB invented it.
Read more
MRP:$194.77 SAVE 17%
coming soon $162.32
FORTHCOMING
Empress Effects Echo System Dual Engine Delay Pedal
Cat: 783107 Rel: 30 Sep 20
 
Delay pedal
Notes: Spanning the gamut of known delay possibilities and beyond, the Echosystem could be the ultimate delay-crafting tool. Faithful emulations of classics like digital, tape and analog delays are numerous, as well as Empress' own take on each of these delay styles. Moving beyond the traditional, the vast amount of sonic ground the Echosystem can cover becomes apparent. Check out the ambient modes when you're feeling chilled out, or perhaps a visit to the multi tap modes for a taste of inspiration.

The Dual Engine functionality allows any 2 of these delays to be used together, routed in either parallel, series, or left/right configurations.

In addition to delays, there's the super-useful reverb combos, which will elevate any guitar part. Oh, and don't forget Whisky mode, best accompanied by a dram of whatever you've got!

The pedal has 12 algorithm types, all with multiple variations. For example, there are 4 different tape delays on tap.

Emulations of classic tape and analog units are available, as well as our take on these types of delay.

All the algorithm controls are sitting on a knob in front of you, no fiddling through laborious menus.

Global tap tempo as well as local tempo with lots of subdivisions are available on all modes, in addition to being able to set the delay time directly with the knob.

Features a signal to noise ratio of >104dB and maintains an analog dry path.

2 delays can be used at the same time, each with its own full set of controls and routed in serial, parallel or left/right.

Settings can be saved to 35 presets. With three stomp switches, accessing the presets is easy.

Bank style or scrolling style preset modes.

It can be configured to run with true bypass or buffered bypass if you want to hear trails.

Cabinet Simulator - 3 variations to choose from, perfect for recording, practicing or for gigs without an amp.

Get hum-free operation when operating in stereo with two amps. Output 2 is isolated with a transformer to eliminate nasty ground loops.

48kHz sampling, with 24 bit conversion and 32 bit internal processing.

Dry signal is left untouched, and blended with the wet signal using VCA. (no zipper noise, hooray!)

The Universal Control Port allows you to connect an expression pedal, external tap switch, control voltage, external audio input and MIDI - all using a standard 1/4" jack!

The Advanced configuration menu lets you configure how your delay works. Select from true or buffered bypass, 0-35 presets, MIDI configuration, Control Port(expression pedal, external tap, control voltage and MIDI) as well as which style of preset system to use, input signal pad, output transformer enable and more!

The enclosure measures approximately 5.7" by 3.75" by 1.75", which is delightfully small when considering all the features packed into this unit.
Read more
MRP:$601.31 SAVE 17%
coming soon $501.09
FORTHCOMING
Maxon AD-999 Analog Delay Vintage Series Pedal
Cat: 783426 Rel: 02 Oct 20
 
Analogue pedal
Notes: The AD999's Delay tone is pure analog heaven - rich, round and three-dimensional, it reacts to your playing and breathes life into your performance.

The AD999 is loaded with eight custom Bucket Brigade IC's for 900 milliseconds of warm, organic analog tone. These BBD's are clocked extremely low to achieve the longest delay time possible, creating a HUGE delay tone that recalls early 70's Pink Floyd with stunning accuracy.

Yet the real magic of the AD999 is in the Delay repeats - they exhibit a slightly overdriven tonality that sits perfectly behind dirty tones and adds depth and dimension to clean sounds. This distortion reacts dynamically to your pick attack, making the initial repeat pop slightly while the remaining repeats blend seamlessly with your original notes.

The repeats also feature a slight EQ spike at around 1.5 kHz, preventing them from getting muddy or non-descript. This also allows the AD999 to maintain presence in a mix without having to raise your volume.

While there are more affordable and more feature-laden Delays out there, you'd be hard-pressed to find one that sounds better than the AD999. When players wax poetic about the mojo and mystery of analog delay - THIS is what they are talking about.

TECH TALK:
A high impedance input buffer passes signal to a Compander stage that acts as a compressor/expander, bringing the input signal up to an ideal level and keeping it there as it decays. This is good for signal-to- noise ratio and also gives the delay chips a clean, strong signal to work with.

The eight x Maxon MC4107D BBD delay IC's are controlled by 2 of the 3 clock drivers in the pedal. These drivers are running the BBDs at a very low clock rate to achieve maximum delay time. This rolls off a fair amount of high frequencies, giving the AD999 its big, warm delay sound.

The delayed signal hits another Compander to level everything out and then goes to a mixer/amplifier that blends the clean and delayed signals and provides a low impedance output.

The AD999 features Mechanical True Bypass switching on both outputs via a Fujisoku 4PDT switch.

Input Impedance: 500K Ohms

Output Impedance: 10K Ohms or less

Residual Noise: -95 dB (input shorted, IHF-A weighted)

Delay Time: 40 mSec 900 mSec

Control: Delay Time, Repeat, Delay Level

Switch: Normal/Effect (4PDT mechanical true bypass)

I/O: Input, Output (Mix in mono, Wet only in stereo), Dry Output

Current Consumption: 46 mA at 9VDC / 48 mA at 10VDC

Dimensions: 117 (W) x 150 (D) x 60 (H) mm

Weight: 600 Grams
Read more
MRP:$346.41 SAVE 17%
coming soon $288.67
FORTHCOMING
Nux NMP-2 Dual Foot Controller
NUX
Cat: 784822 Rel: 15 Oct 20
 
Dual foot controller
Notes: Dual foot switch controller for on-the-fly control of guitar effects and amplifiers. Dual mono or stereo jack compatible with individual latching/momentary options for each switch. Designed for use with NuX pedals and compatible with many other types of equipment.

LED indicator per pedal
Latching or non-latching selectable
Compatible with NUX Loop Core Deluxe, JTC Drum & Loop PRO and Cerberus

The box for this item contains :

NuX NMP-2 dual foot controller

Power supply: 9Vdc (5.5 x 2.1mm, centre-negative) optional for LEDs
Dimensions: 96 x 50 x 46mm
Weight: 200g
Read more
MRP:$45.75 SAVE 31%
coming soon $31.58
FORTHCOMING
Keeley Dynatrem Multiple Waveform Tremolo Pedal
Cat: 782397 Rel: 25 Sep 20
 
Tremolo pedal
Notes: The DynaTrem Dynamic Tremolo by Keeley Engineering is an all new type of tremolo that is dynamic and responsive to your playing. Your playing controls the Rate and Depth. The harder you play, the more it responds. Play softly and it relaxes. Set the sensitivity with Rate or Depth controls and you have an unparalleled ability to be expressive with your guitar and tremolo.

Tone Trio - Three Modes
Dynamic Rate - Your playing strength controls the Rate. The harder you play, the faster it modulates! Relax and play softly and the tremolo almost stops.

Dynamic Depth - Play gently and it just barely throbs. Play aggressively and it and pulse hard and deep.

Harmonic Tremolo + Reverb Mode. Yes that phaser/vibey, soulful and sweet sound! Slippery and smooth, you won't want to gig without it. Add Reverb by adjusting the SHAPE control

Wave Table
With a spin of the SHAPE control you get 4 wave-forms: Ramp Up, Sine Wave, Ramp Down, and Square Wave.

4th Mode! All DynaTrems after serial number 300 have a hidden feature mode: Stadard Tremolo Turn the Shape knob all of the way down and it become a standard triangle wave tremolo in the Delta Rate or Delta Depth modes. Call us for a free upgrade if yours does not have this feature.

Or, when in Harmonic Tremolo Mode the Shape control is Reverb!

Other Features:
Integrated noise reduction - developed with the code to reduce noise swells common with tremolo circuit, you get the quietest effect possible.

Output Volume Control - Can be set for a boost for stand out effect.

True-Bypass - No tone loss when off

Battery Free - Any standard 9 volt, negative tip power supply will work, like a Voodoo Lab Pedal Power II. 60mA or greater.

Keeley Engineered - Decades of audio experience and design.

The DynaTrem Dynamic Tremolo features killer graphics! Looks like an old tube amp or old tube radio. Tone to match too!
Read more
MRP:$260.13 SAVE 17%
coming soon $216.77
FORTHCOMING
Keeley Red Dirt High/Medium Gain Overdrive Pedal
Cat: 782454 Rel: 25 Sep 20
 
Overdrive pedal
Notes: The Red Dirt overdrive began from a quest to find the perfect classic drive sound while also offering new levels of sonic versatility to satisfy a wider range of musical styles. Founder and head engineer Robert Keeley took this idea and combined the great sounds found within his original "Mod Plus" and "Baked" modified pedals and added refinements found exclusively in his custom pedal line. A Keeley designed FET input stage makes this overdrive breakup in a whole new, genuinely "tube like" style that will have your leads singing and your rhythm playing sounding more dynamic and expressive than ever. It all culminates in an overdrive that is superbly dynamic, with crispness and clarity that let players cut through a dense mix, while retaining the plump midrange. By incorporating these tones along with the Keeley standard of U.S.A. hand-built quality using premium components, the Red Dirt overdrive aims to become an indispensable part of any pedal chain.
Read more
MRP:$260.13 SAVE 17%
coming soon $216.77
FORTHCOMING
Keeley Loomer Wall Of Fuzz Pedal
Cat: 782429 Rel: 25 Sep 20
 
Fuzz/reverb pedal
Notes: The Loomer is a Wall-Of-Fuzz drenched in a Wash-Of-Reverb.

Heavy Gain, Soft Focus, Reverse, Cascading Octave Feedback, Tremolo Bar Strummed Reverb.

A stoned, morning floaty, messed up, thrill machine is what it is. Washes of reverb in new ways you've not heard in a stomp box before and a fuzz that's like a cigarette burn on your forearm. It rages.

Jesus, Mary, and Reverbs
Can't live without these three and the new reverbs are born of a Shoegaze dream.

Hall
Super long ambient wash with the ability to add octave regeneration in the feedback loop. More than shimmer it's more like ascension shimmer.

Reverse
Set different delay times with the Decay control which gives you rhythmic reverse. This is based on the Yamaha SPX90 and the Alesis Midiverb II. This is not a true reversed reverb as it reads through a delay line at various points in the delay while increasing in volume. The Decay control is more of a switch in that it is chooshing between 8 different set "decay" times: 150ms, 200ms, 250ms, 300ms, 350ms, 400ms, 450ms, and 500ms allowing you to set all kinds of delay times in which the notes come back at you.

This is where it gets really cool. The vibrato in this mode is envelope controlled. The range runs from 0 to 50ms of time shift.Tone control is loosely based on the Jazzmaster rhythm tone control with a low pass filter centered at 156.6Hz Strum hard at it pitch bends like you are playing the trem bar on a Jazzmaster or Jaguar! Combine the two for an unreal dual-guitar player effect!

Soft Focus
Because all of the reverbs can go All-Wet by means of the Blend Control, this is a great approximation of the Yamaha FX500 patch. Soft Focus Reverb features a dense reverb with two delays in parallel (one set for 250ms, the other set for 380ms.)
Read more
MRP:$390.85 SAVE 17%
coming soon $325.72
FORTHCOMING
Keeley Delay Workstation Delay And Reverb Combi Pedal
Cat: 782388 Rel: 25 Sep 20
 
Delay & reverb pedal
Notes: The Keeley Delay Workstation is a powerful, dual DSP processor delay and reverb machine. Combining Keeley's unique delay and reverb patches in an incredibly small package, the Delay Workstation is an extremely creative tool.

With the Delay Workstation you can combine vintage slapback and multi-head tape echoes with Spring or plate reverbs to create some instantly classic sound spaces. You can set the Delay Workstation for warm sounding analog delays and then use the chamber or hall reverbs to create a huge warm and endless space. Need rhythmic delays with some shimmer? It's here. Always wanted to have the perfect ducking delay? One that backs out of the way until your done with your notes, then the echoes fill in. "Ducking" is a very intelligent way for clearing the clutter in a sound that would normally be overrun with delays and echoes. Wanna get twisted? Try the Pitch delay into the Flanged Reverb.

The Reverb side of the Delay Workstation contains all of the most common reverbs and some delays. The Morph control allows users to put creative twists on the reverb patches like spring tension, shimmer, and random flanging. There are two delays included in the reverb bank. You can use these to setup very cool ping-pong delays and many other creative rhythmic patterns.

Two banks of eight legendary effects. Super Fidelity. Super Compact.

The Delay Workstation has on-board tap tempo on the Delay side and external expression control on the Reverb side.

Effects Include:

Slapback w/reverb

Tape Delay w/tone control

Multi-Head Echo w/3 head control

Analog Delay w/dynamic modulation

Digital Delay w/inverse dynamic modulation

Subdivided Delay w/dotted eighth, eighth, triplet, sixteenth

Ducking w/compression ratio

Pitch Shifting delay with w/octave up/down control

Spring Reverb w/tension control

Chamber Reverb w/filter control

Hall Reverb w/tone control

Plate Reverb w/tone control

Shimmer w/octave up control

Flanged Reverb w/vibrato or random modulation
Read more
MRP:$390.85 SAVE 17%
coming soon $325.72
FORTHCOMING
Keeley Magnetic Echo Delay Vintage "Tape Echo" Style Delay Pedal
Cat: 782430 Rel: 25 Sep 20
 
Delay pedal
Notes: The Mag-Echo pedal simulates tube tape echo sounds by using the delay circuit and a little bit of modulation. Tape echos have long been regarded as a warm and very guitar friendly form of delay. The Mag-Echo achieves similar results by using a touch of Lo-Fi delay, a slightly filtered echo response to keep things warm, and some modulation. Modulation, or "Wow and Flutter" in the tape world is a slight pitch shift or wavering that occurs as the tape is pulled across the heads. The modulation used is similar to what is uses in Keeley's Seafoam Chorus, a slight wavering of pitch on the trails of the repeats. With a simple set of controls for the delay Time, Regen, and Level and with the "Wow and Flutter" controls - Depth and Rate you can create some very vintage or rather unique tones.

Delay Time - This Time control roughly sets the length between your repeats between 40ms and 600ms. This range is well suited for classic, vintage delay sounds that are great for slap-back or medium length delay times.

Regen - This control sets the number of repeats. You can set this for a single slap back echo or turn it up for a runaway, self-oscillating or self-regenerating echoes. (Now go back and twist the Time control for some crazy sounds!)

Delay Level - The Level control is your mix, how loud you want to hear the echoes.

WOW AND FLUTTER CONTROLS

Depth - Turn this control to achieve deeper and deeper chorusing and pitch shifting on your echoes. As you raise the control the Depth and Rate LED will start to glow giving you a visual indication as to the amount of modulation you are applying to the repeats.

Rate - This is your Flutter control. It's another way to control how poorly your tape echo is performing! Not that any tape deck was every in this bad of condition, but it sure sounds good to have a little pitch modulation on your echo! Using these controls gives you a nice way to create unique and very musical delays.

Whether you're into Rockabilly slap-back echoes, experimental sounds, or just want a great classic rock sounding echo, the Magnetic Echo will sound great in your rig.

Keeley Electronics started to develop and produce this delay way back in 2005. But as things happened, we worked on other projects, always keeping an eye on the growing delay and echo market. We sure you will be very happy with the tone of this echo/delay/modulation effect.

It's pretty clear from this unbiased shoot-out that the Magnetic Echo wins. The delays sound more like the original and not as filtered and cut off. The modulation is more sophisticated. Price point is the same!
Read more
MRP:$194.77 SAVE 17%
coming soon $162.32
FORTHCOMING
Keeley Super Mod Workstation Modulation Pedal
Cat: 782464 Rel: 25 Sep 20
 
Modulation pedal
Notes: Sonically drench yourself in swirling modulated tones. Not many effects can be as provocative as a chopping tremolo, a swirling rotary, a dreamy chorus, or a crazed filter sound. Nothing compares 2 a thick flanger or deep harmonic tremolo. Nothing goes better with modulation than delay and reverb. With the Super Mod Workstation you can combine 2 effects together to create a nearly endless soundscape of tones. Add tap tempo and an expression pedal and you have all the tools at your disposal to create a mesmerizing array of sounds.

The Super Mod Workstation contains many of Keeley's finest effects. The Harmonic Tremolo in this unit is inspired by vintage brown face amps. The Keeley DynaTrem contained our first Harmonic Tremolo. Many consider this deeper and thicker sounding than the U Vibe type effect. The ADT in the Super Mod Workstation is from the 30ms Automatic Double Tracker. Last year that effect set the effect world on fire with the best complete ADT unit in a stomp box.

The Super Mod Workstation allows you to combine effects like Tremolo, Filter, Phaser, Chorus, Rotary Speaker, or Delay with other similar modulation effects, including delay or reverb! For example you can combine our famous 30ms Double Tracker sound in the ADT, with a Flanger, or an Echo, or Plate Reverb. Another example would be to use Bank 1 - Phaser sound, combined with Bank 2 - Delay. You can use the expression pedal to run delays into self oscillation feedback! You can Tap Tempo input a rate for the Harmonic Tremolo sound on Bank 1 and then use an expression pedal input for speed of the Rotary Cab sound on Bank 2. Decide it's #modulationFreeMonday? Well, you can use the Analog Delay on Bank 1 and a super wet Hall Reverb on Bank 2.

Two banks of eight legendary effects. Super Fidelity. Super Compact.

The Super Mod Workstation has Tap Tempo for Mod Bank One, and external expression control on Mod Bank Two.

Super Mod Workstation effects include:

Tremolo w/triangle to sine waveform control

Harmonic Tremolo w/presence tone control

Filter Trem w/oscillator and random control

Phaser w/feedback control

ADT w/blend control

Rotary Cabinet Sim w/treble horn control

Digital Delay

Analog Delay w/dynamic modulation

Chorus/Vibrato w/blend control

Flanger w/positive or negative feedback

Hall Reverb

Plate Reverb

Tap Tempo on Modulation Bank 1

Expression Control on Bank 2
Read more
MRP:$390.85 SAVE 17%
coming soon $325.72
FORTHCOMING
Keeley Tone Workstation Drive, Boost & Compressor Pedal
Cat: 782481 Rel: 25 Sep 20
 
Drive/boost/compressor pedal
Notes: Introducing the Tone Workstation. The front end of your signal chain- this is where your tone develops. The first stage of amplification is critical for a sound that has clarity and delivers expressive tone. Compression, Drive, Overdrive, Boost: you get it all here. The Tone Workstation is designed to be the first stage in your pedal board. It may even be the only pedal you bring to a gig. And we designed it that way.

Starting with the classic Keeley Compressor, you can build a nice, thick tone full of sustain. Adjust the Sustain control for increased compression or squeeze. As you add sustain, your notes will ring out longer. The Blend control allows for a Manhattan-style compression, keeping the sound lively and crisp as you blend in your natural guitar tone. The Blend control is perfect for adding a little bit of bite back in with high output pickups or humbuckers. In addition, the Treble Boost switch can be engaged to further increase the treble and sparkle into the signal when using lots of compression. When the Blend is set completely CCW, you get only compressed signal out. Then, as you turn up the Blend, you blend in more and more of your original signal, all the way to a 50/50 ratio. The attack and release times are pre-set in this compressor and are set for use with humbuckers or single coils.

Next up is the 1962/Katana Boost section, because the Keeley Workstation gives you plenty of options for your core tone. With the 62/Katana channel, you can select a sound with just the right amount of break up. Or use it in Boost mode, for that clean, pushed amp-style overdrive. First, the 1962 is Keeley's British amp-style overdrive, which is full and even sounding with a moderate amount of crunch. Based on the famous Blues Breaker, the 1962 stage has been amplified by our Katana Boost on either side, adding tube-like saturation with our JFET valve simulation. But, decide you just want the famous Katana Clean push? No worries. Just a flick of the switch and you have it: pure clean, tube tone. In the Katana Mode, only the volume works; the Tone and Drive are disabled. It's a clean sound people say you just can't turn off.

Last in the chain is Keeley's renowned Red Dirt overdrive. You get 15 years of modding tube screamers distilled into one toneful circuit. Also featuring our JFET front end, the Red Dirt has the perfect amount of crucial midrange coupled with the option to go all the way from clean and clear to super-saturated gain, times two! The Red Dirt circuit captures every nuance of your guitar's tone and delivers a classic, smoking hot, silky smooth lead tone.

Dimensions are 4.7 Inches wide x 3.72 Inches tall. Standard 9V Neg-Tip Power Supply and under 50mA.
Read more
MRP:$390.85 SAVE 17%
coming soon $325.72
FORTHCOMING
Keeley Vibe-O-Verb	Ambient Reverberation Machine Pedal
Cat: 782480 Rel: 25 Sep 20
 
Three mode reverb pedal
Notes: This three mode reverb lets you hear what some of the most classic effects sound like on just the reverb. Allowing you to create new sounds and textures like never before.

Fibonacci
All of the Delay Space in the reverb engine for the pedal are in the Fibonacci series. What does this mean for you? You'll probably make more money, look better (see golden ratio below) and find true happiness. But what this means for Keeley is a secret pleasure in defining a reverb that is unique and possibly more musical. Since great works of art like Debussy's La Mer have been crafted by using the Golden Ratio, why not create lengths of time defined by such ratios? 0, 1, 1, 2, 3, 5, 8, 13, 21, 34...

Harmonic Reverb
This mode is like a vintage Brownface Amp or our DynaTrem, Harmonic Tremolo on the reverb. Imagine choppy waves of tremolo on your verb! All with the a delicious hint of Vibe! Dynamic Dimension Canyons?!

Vibrato Reverb
Pitch Bending Reverberation Machine. From mild chorus to spacey bayou tones! Too grande to call our modulated chorus, this is one for modern psychedelics. For this one you have to imagine maybe both the source and the reflective wall moving! Maybe even accelerating with respect to each other.

Phaser
Phaser Modulated Reverb. Maybe the most mild but in a way that lets you appreciate some of the space around notes. This notch filter in your reverb space gives the illusion of the reflecting wall morphing from carpet to wood, then to steel and then glass. Round and round. Get the idea? Dynamic reflections in an all new space.
Enjoy these "Lost Reverbs" Vibe-O-Verb, reverbs that never were- until now.
Read more
MRP:$194.77 SAVE 17%
coming soon $162.32
FORTHCOMING
Keeley Verb O Trem Workstation Powerful Reverb & Modulation Machine Pedal
Cat: 782482 Rel: 25 Sep 20
 
Reverb/modulation pedal
Notes: The Keeley VoT reverb and tremolo combo gives players a simple and beautiful sounding way to end their pedal boards. Reverb and Tremolo often sound best at the end of your guitar rig, after effects like compression, fuzz or overdrive. The Keeley VoT Workstation gives you the famous Keeley spring and plate reverbs as well as modulated tube amp tremolos. This immaculate pairing provides you with everything you need for a small, compact pedal board.

When you go minimalist, you still consider Reverb and Tremolo.

So if you're doing a small gig with a compact board or you just want the captivating power of tremolo and reverb at the same time, the Keeley VoT Workstation is a simple and beautiful sounding solution.

The Keeley VoT Workstation is a high-end Dual DSP effect workstation. Each effect, reverb and tremolo are given their own effects engine. This allows us to create rich and ornate filtering. These are studio quality sounds we that have been crafted over the years, refined by working musicians and studio engineers.

Reverbs
Keeley knows and develops reverb spaces. Fat, juicy, sonically rich spaces. Keeley 2 Spring Reverb is the real deal. It's so good sounding, they install it in The Amp now. In fact Keeley reverb has been developed in many other brand's pedals.

There are 8 petals to this flower: 2 Spring, 3 Spring, Plate, Hall, Chamber, Room, Fugue, and Slapback!

Each Keeley VoT Workstation reverb allows you to control:

Level - Output Volume Level for the reverb channel

Decay - this is the length of the reverb trails, the size of the ambient space. External Expression Control port on rear of unit.

Morph - Pre-Delay - The earliest reflections, sometimes heard as a slapback. This is great for setting up a reverb space that sounds huge, or you can dial it in so that it plays well with fast, percussive notes.

Effect Level - This is your Blend Control- how loud you want the reverb in your guitar mix.

Tremolos
A Lotus Flower of Tremolos- you have eight blooming tremolos in the Keeley VoT Workstation!

8 Vintage Tremolo modes: Sine Wave, Square Wave, Harmonic, Dynamic Harmonic, Pitch Vibrato, Ramp Trem, Les'Rotary Speaker, U-Vibe

Level - Output Volume Level for the tremolo-modulation channel

Rate - Speed of modulation, with on-board Tap Tempo, external tap input jack.

Depth - amount of volume change in effect. THROB.

Morph - Controls a variety of aspects including filter points, wave shape, duty cycle, tweeter/woofer control, etc. Instruction manual lists exact details.

VoT - Lotus
The VoT Workstation Tremolo allows you to have on-board Tap Tempo or you can use an external tap switch or generator. Expression pedal control gives you foot controlled access to the Reverb Decay control. This allows you blend the perfect amount of reverb into your guitar mix.
Read more
MRP:$390.85 SAVE 17%
coming soon $325.72
FORTHCOMING
Keeley Dyno My Roto Tri-Chorus, Rotary & Flanger Pedal
Cat: 782399 Rel: 25 Sep 20
 
Tri-chorus.rotary/flanger pedal
Notes: You want tri-chorus in a pedal? Try the new Keeley Dyno My Roto!

Finally you can get those 80's vintage rack chorus sounds that define killer chorus sounds. This was not an easy development. The Dyno My Roto is a tough and difficult thing to accomplish in such a small package and we couldn't leave good enough alone. Keeley have added a Flanger and a Leslie Cabinet simulator.

The magic to the chorus sound in the Dyno My Roto is the three LFOs that give you lush modulations that truly sing out like a chorus of guitars. Most chorus pedals, in fact nearly all, are simply two voice, one straight and one modulated. This offers twice the amount of joy by modulating another voice. That significantly reducing the ability to just hear one voice being affected and smears a couple voices in an effect that is truly enjoyable to listen to.

Keeley have come up with a new Rotary Cabinet package that give you a Proximity Control. The Proximity Control controls how far away you are from the spinning speaker cabinet. This adds a depth and distance to the cabinet and is a touch like a reverb control. It gives you that spatial expanse that can give you presence or depth in the chorus-like rotations. Lastly, while we were spinning things, we crafted a RotoFlange sound that has a simple negative feedback control. Easy to use and gets you the most classic flanger sounds possible.

So whether you are going for a Alex Lifeson of Rush tone, a Andy Summers of the Police tone, or an SRV Crossfire rotary tone, we have you covered in one box with the Dyno My Roto.
Read more
MRP:$260.13 SAVE 17%
coming soon $216.77
FORTHCOMING
TC Electronic Spectracomp Bass Compressor Pedal
Cat: 781360
 
Bass compressor pedal
Notes: SPECTRACOMP BASS COMPRESSOR is the tiniest big thing to hit the world of bass in a long time. This ultra-compact and highly intuitive multiband compressor, is made to bring out all of the glorious low-end punch and presence of your beloved bass in the most transparent and musical way you've ever heard. Just turn it on and take charge of the groove.

Studio-quality multiband compressor - perfectly tuned for bass
TonePrint enabled
Ultra-small footprint

The magic of multiband bass compression was first introduced in TC's innovative RH-series bass amps, which made dialing in super-smooth compression an absolute breeze. With SPECTRACOMP BASS COMPRESSOR the simplistic one-knob approach from the amps was kept, while greatly improving the compression algorithm. This gives you access to studio-quality compression tones, in a stompbox so small that you can't afford not to have it on your board.

SPECTRACOMP BASS COMPRESSOR contains the same high-quality MD3 dynamics engine known from TC's studio production powerhouse, System 6000. A dynamics engine that has been used on countless hit-records and massive blockbuster movie productions. This advanced algorithm applies perfectly tweaked compression for your high, mid and low frequencies to create a more unified and balanced sound where your low strings never overtake your highs, something that's simply not possible with the one-size-fits-all compression known from a typical stompbox. This way you'll get a tight and punchy attack, with endless sustain all without ever compromising the natural low-end response of your bass.

Picture SPECTRACOMP BASS COMPRESSOR as an ice cream. It's smooth, delicious and easy to love. But maybe you want to super-pimp your ice cream with cherries, chocolate sauce and sprinkles shaped like unicorns? You want to make that tone-sundae your own. This is where TonePrint comes into play. Via the free editor you can customize your own compression tone through a wealth of deep editing parameters, so it suits your rig perfectly. You can also try on custom pre-made tones via the free app for Android and iOS. Tone tweaking just leveled up.
Read more
coming soon $74.07
FORTHCOMING
Fulltone Supa-Trem Jr Amp-Style Opto Tremolo Pedal With Boost
Cat: 782881 Rel: 26 Sep 20
 
Tremolo pedal
Notes: The logical progression to the beloved Supa-Trem1 is here!

It's a much, much smaller than the ST-1 at only 3.9" wide x 4" deep, and more intelligent version of the epic Supa-Trem1. Sporting True-Bypass,Tap-Tempo, external Tap jack, Half/Double hold feature, up to 15dB boost, true Square, Sine, and the natural heartbeat-like Warble wave-forms! It also can do speeds so slow that a full cycle takes around 10 seconds, and fast speeds beyond 220bpm. The heart of the ST-1 is still there, the warm Analog Devices JFET preamp. And this pedal is so small it will fit in your pocket, and with its top-mounted jacks, will fit in any little spot on your board. Don't forget, just like the ST-1, the Jr also works as an incredible clean boost with the Mix control turned down!

3 switchable waveforms:
Square, (modified) Sine, and (heartbeat-like) Warble wave-forms. Digital Brain (for the oscillator only) with 100% analog signal path. Unlike the ST-1, the Jr can do speeds so slow that a full cycle takes around 10 seconds, and fast speeds beyond 220bpm. The heart of the ST-1 is still there, the warm Analog Devices JFET preamp. And this pedal is so small it will fit in your pocket, and with its top-mounted jacks, will fit in any little spot on your board. Just like the ST-1, the Jr also works as an incredible clean boost with the Mix control turned down!
Read more
MRP:$241.83 SAVE 17%
coming soon $201.53
FORTHCOMING
Old Blood Noise Mondegreen Weird Delay Pedal
Cat: 782153 Rel: 24 Sep 20
 
Delay pedal
Notes: The Old Blood Noise Endeavors Mondegreen pedal is a digital delay hellbent on giving you something different than what you put in. It's delay. Into modulation. And it's weird.

A three-way toggle switch selects between three modes of modulated delay.
STUTTER: A delay with a percussive tremolo on the trails.
WHIRL: A modulated delay adding chorus on the wet signal.
SHEER: A delay with increasing octaves on the repeats.

9VDC - 2.1mm negative center pin adapter.
60 mA draw.
Read more
MRP:$247.06 SAVE 17%
coming soon $205.88
FORTHCOMING
Empress Effects Buffer Plus Pedal
Cat: 782953 Rel: 30 Sep 20
 
I/O interface
Notes: The Empress buffer+ was designed to be the complete I/O interface for the pedal board, while maintaining the highest fidelity to your guitar's signal.

Signal loss due to long, un-buffered cable runs is an issue that has plagued guitar players for decades. The primary goal of the buffer+ is to eliminate this signal loss, ensuring that your tone is unchanged by your cables.

Additionally, all the connectivity of your pedal board is consolidated to make set up quick and easy. The buffer+ also has a very handy set of features that make life just a little better. Noise filters, input pads, switchable clean boost and input loading are all powerful tools available on the buffer+.

Input Impedance: 10k - 1Meg
Output Impedance: 510 Ohms
Frequency Response (-3dB): 5Hz - 40kHz
Power Input Voltage: 9V DC (Negative tip)
Power Input Connector: 2.1mm barrel connector (Negative tip)
Power Consumption: 86mA
Total Harmonic Distortion: 0.02%
Signal to Noise Ratio: 105.3dB
Headroom: +9.4dBu
Enclosure Material: Die Cast Aluminum
Input connectors: 1/4" Jack
Output connectors: 1/4" Jack
Height (enclosure): 1.25"
Height with controls: 2"
Length: 4.5"
Width: 2.5"
Weight: 0.5 lbs
Read more
MRP:$209.15 SAVE 17%
coming soon $174.29
FORTHCOMING
Empress Effects Nebulus Chorus/Vibrato/Flanger Pedal
Cat: 783089 Rel: 30 Sep 20
 
Chorus/vibrato/flanger pedal
Notes: The Nebulus brings guitarists high quality chorus, flanger and vibrato effects in a really compact 4.5 by 3.5 inch pedal. To increase the tone range even further 3 variations on each effect are available for a total of 9 tweak-able modes. All this flexibility is easy to access via a preset system capable of storing up to 8 different presets.

The chorus mode offers a lush and warm sounding chorus, a fluid and dreamy multi-chorus, and a unique tremolo'ed chorus. The flanger setting has a classic tape flange, a 70's negative feedback type flanger, and the elusive thru-zero flange. Lastly, but certainly not least, are the vibrato sub-modes which include a standard vibrato, a classic vibe sound, and a rotating speaker effect.

Each mode includes a special switch which allows the guitarist to really tweak crucial settings and it also offers some bonus features like the ability to add compression to vibrato mode, for example. For further fine tuning, a tone switch is available offering warm, clean, and bright voicings to the effect.

This true bypass pedal offers the uncompromising sound quality that guitarists have learned to expect from Empress pedals in an incredibly small box. With chorus, flanger and vibrato all only one touch away, this pedal is an incredible value.

Specifications:
Input Impedance: 1Meg
Output Impedance: 1K
Frequency Response (-3dB) - 8Hz - 18.5kHz
Input Headroom: +10.8dBu
Output Headroom: +10.2dBu
Distortion: 0.40%
Signal to Noise: 102.7dB
Power Input Voltage: 9 - 12 V DC (Negative tip)
Power Input Connector: 2.1mm barrel connector (Negative tip)
Power Consumption : ~300mA
Enclosure Material: Die Cast Aluminum
Input connector: 1/4" Jack
Output connector: 1/4" Jack
Height (Enclosure only): 1.5"
Height (including controls): 2"
Length: 3.5"
Width: 4.5"
Weight: 1 lb
Read more
MRP:$411.77 SAVE 17%
coming soon $343.13
FORTHCOMING
J Rockett Archer Versatile Overdrive & Boost Pedal
Cat: 783165 Rel: 01 Oct 20
 
Overdrive/boost pedal
Notes: The Archer is sort of a 2 in one pedal. It can be used as just a clean boost by turning the gain all the way down. As you introduce gain it will attenuate the clean signal but there is a magical blend in between that you will find. Please experiment!

Dimensions: 4.00" x 2.30"

9 volt Negative tip adaptor and a 5.5mm x 2.1mm jack.

9 volt Battery

Buffered Switching
Read more
MRP:$260.13 SAVE 17%
coming soon $216.77
FORTHCOMING
Maxon BD-10 Hybrid Bass Driver Ten Series Pedal
Cat: 783267 Rel: 02 Oct 20
 
Overdrive pedal
Notes: The BD10 Hybrid Bass Driver brings Maxon's 40+ years of experience in Overdrive design to the world of the Bass Guitar. But guitarists, don't despair; the BD10 works equally well with six strings as it does with four!

The BD10 was designed in cooperation with Masaki - a prominent Japanese Bassist who has played with world-class musicians such as Carmine Appice, Gus G, and John Petrucci, and is also a founding member of the Japanese heavy metal band Animetal.

Masaki's aggressive approach to the Bass includes fluid soloing, manic slapping & popping, energetic fills, and crashing chords for punctuation. He required an overdrive that could keep up with this energetic playing style while still retaining low-end punch and authority.

The BD10's symmetrical clipping path provides sustained, harmonically-rich saturation that retains note clarity and expressiveness even at maximum settings. Aggressive yet dynamic, the BD10 can articulate fast playing techniques such as the multi-finger picking and two-handed tapping that Masaki is famous for.

The BD10 can cover a wide variety of distorted tones, from semi-dirty boosts to punchy, tube-like grind all the way to super-saturated shred. Distorted sounds can then be blended with Dry signal using the independent Clean and Drive Level controls.

Fine tuning the balance between Clean and Distorted signals, the user can obtain the ideal mix for their particular playing style and equipment. Use a pick? Turn up the Drive for chunky chugs. Play with your fingers? Boost the Clean for more clarity and articulation of your notes.

Clean signal can be boosted up to +6 dB above unity gain, allowing the DB10 to be used as a clean or semi-clean booster or as a linedriver for your signal chain.

Since the BD10's circuit is based on Maxon's legendary 808 design, it can also be used with Guitar. The dual tone controls allow the user to dial in the lows that are typically lost with 808-style pedals, while the ability to blend clean and dirty signals can simulate the sound of a dual-amp rig as well as pedals like the Klon Centaur and Voodoo Labs Sparkle Drive.

Compact, versatile, and musically expressive, the BD10 Hybrid Bass Driver is a worthy and welcome addition to the Maxon family of world-class Overdrives.

TECH TALK:
The BD10 features a low-impedance buffered bypass, allowing it to drive long cable lengths or other effect units without loss of signal.
Read more
MRP:$189.54 SAVE 17%
coming soon $157.95
FORTHCOMING
Maxon CS-9 Stereo Chorus Pro Nine Series Pedal
Cat: 783314 Rel: 02 Oct 20
 
Chorus pedal
Notes: With a circuit based around the Panasonic MN3207 Bucket Brigade IC, the CS-9 Pro's chorus effect is bold and resonant without sounding harsh. Unlike the somewhat sterile sounds of its 80's predecessor, the CS-9 Pro has an edgy, almost grainy quality that keeps your tone articulate and prevents wash-out.

The CS-9 Pro's custom-tuned oscillator circuit provides enough speed for authentic rotary speaker simulation, and just the right amount of modulation for a lush vibrato that won't leave you feeling queasy.

With its Delay Time control the CS-9 Pro can venture into Flanger territory, adding a resonant, hollow quality to the effect that's great for solos.

A top-mounted Blend control allows you to adjust the level of the Chorus effect to set it back in the mix against your dry signal.

A unique feature of the CS-9 Pro is its ability to create spatial effects that add dimension to your guitar tone without the traditional Chorus wobble. With Speed and Depth set low and the Delay Time at max, the Pro thickens your sound much in the manner of a double-tracked guitar, adding girth and life without excessive modulation.

The CS-9 Pro features stereo outputs for mono, stereo, or inverted mono signal routing.

The CS-9 Pro is essentially the same as Maxon's CS550, but in a smaller chassis and with battery or AC power options.

TECH TALK:
The CS-9 Pro circuit is similar to the Arion SCH-1 Stereo Chorus, or an updated Boss Chorus Ensemble. A high-impedance input buffer passes next into a Compander stage that acts as a compressor/expander, bringing the input level of the signal up to an ideal output level and keeping it there as the signal decays - this provides a good signal-to-noise ratio and gives the chorusing section a nice, steady signal to modulate.

The Chorus effect is produced by a Panasonic MN3102 low-voltage clock driver IC and a Panasonic MN3207 BBD IC which is controlled by the MN3102. Though the 3207/3201 combo has less delay range than other BBD's of this type, the difference is negligible and the inherent decay of signal quality adds "vintage lo-fi warmth" to the signal.

After the Chorus section, the signal hits another Compander to level everything out and is then fed to an output buffer.

At the end of the circuit the signal is phase-split and sent to the two low-impedance stereo outputs - Output A is in-phase and Output B is phase inverted (90 degrees out of phase).

The CS-9 Pro features Mechanical True Bypass switching on both outputs via a Fujisoku 4PDT switch.

Input Impedance: 500K Ohms

Input Jack: 1/4 inch standard phone jack

Output Impedance: 10K Ohms or less

Output Jack: 1/4 inch standard phone jack

Outputs: 2 (Out, Inv. Out)

Residual Noise: -92 dB or less (input shorted IHF-A weighted)

Delay Time: 0.9 mSec to 6.4 mSec

Speed Frequency: 0.4 Hz to 8 Hz

Controls: Speed, Width, Delay Time, Blend

Switch: Normal/Effect (true bypass configuration w/4PDT switch)

Power Supply: 6F22 9V Manganese dry cell battery x1 or Maxon AC adaptor

Power Consumption: 26 mA (9 V) or 26 mA (10 V)

Dimensions (whole): 74 mm (W) x 124 mm (D) x 54 mm (H)

Weight: 580 g (including battery)

Options: Maxon AC Adaptor (AC210N) Tip Negative/Barrel Positive configuration

Accessories: 9V Manganese dry cell battery x 1

Warranty Card: x 1

User's Manual: x 1
Read more
MRP:$260.13 SAVE 17%
coming soon $216.77
FORTHCOMING
Maxon ASC-10  Ambient Stereo Chorus Ten Series Pedal
Cat: 783260 Rel: 02 Oct 20
 
Ambient stereo chorus pedal
Notes: The ASC10's chorusing effect is set especially wide in the stereo spectrum, offering a lush tonality that actually sounds like two guitars playing at once.

The extended operation range of the Rate and Depth controls conjure up everything from gorgeous 12-string simulations to punch-drunk rotary speaker spins.

Stunning on clean sounds and aggressive on distorted tones, the ASC10 is equally at home in the front-end or the FX loop of an amp.

Dual, phase-inverted outputs allow for panning of the ASC10's effect between two amps or tracks, or run mono from output B for a more dramatic chorus effect.

TECH TALK:
The ASC10 features a low-impedance buffered bypass, allowing it to drive long cable lengths or other effect units without loss of signal.

Input Impedance: 500K Ohms

Output Impedance: 10K Ohms

Controls: RATE, DEPTH

Switch: Bypass/Effect

Indicator: Bypass/Effect LED, RATE LED

Maximum Input Level: 4dB (400Hz)

Equivalent Input Noise: -100dBu or less (Input shorted, IHF-A weighted)

Delay Time: 4.6mSec to 7.6mSec

Rate Frequency: 0.33Hz to 8Hz

Power Supply: 6F22/6LF22 9V battery x 1 or Maxon AC adaptor

Power Consumption: 20mA max. / 9VDC

Battery Life:
9VDC manganese battery 15 hours 25 deg C (FUJITSU 6F22)
9VDC alkaline battery 30 hours 25 deg C (TOSHIBA 6LF22)

Dimensions (whole): 70(W) x 113(D) x 56(H)mm (with protrusion)

Weight: Approx. 290g (incl. battery)

Accessory: 6F22 9V battery x 1, operating manual* 0dB = 0.775Vrms
Read more
MRP:$215.69 SAVE 17%
coming soon $179.74
FORTHCOMING
Maxon FA-10 Fuzz Elements Air Ten Series Fuzz Pedal
Cat: 783271 Rel: 02 Oct 20
 
Fuzz pedal
Notes: The FA10 Fuzz Elements Air accurately recreates the distinctive square wave clipping and octave harmonics of one of history's most desirable dirt boxes, the Super Fuzz.

The original Super Fuzz was created by Shin-Ei, but saw later incarnations under brands such as Apollo, Shaftesbury, JAX, Tiesco, Memphis, and most famously, Univox.

It was used on countless recordings in the late 60's & 70's, most notably the Who classic Live at Leeds. Long out of production, the Super Fuzz saw resurgence in the 90's during the Grunge & Alternative Rock era, appearing on the Beastie Boys' Gratitude, Mudhoney's Big Muff Super Fuzz album and Monster Magnet's stoner-rock classic, Superjudge.

The Super Fuzz used dual germanium diodes and a unique full-wave rectification circuit to produce sizzling upper octave harmonics as well as subtle lower harmonics that filled out the guitar sound.

The FA10's analog circuitry nails the Super Fuzz's crushing, compressed tone with surgical precision, and includes the two position Tone switch to toggle between flat and scooped EQ curves. These settings produce wildly different sounds, offering stark contrast to one another and effectively making the FA10 two pedals in one.

A unique aspect of the FA10 is its ability to reproduce rhythm or lead lines with equal clarity, yet without changing settings on the pedal.

Featuring authentic Vintage tones and modern features, the Fuzz Elements Air is the perfect vehicle to make your playing soar.

TECH TALK:
The FA10 features mechanical true bypass switching, Effect LED Indicator, and 9-Volt DC Battery or external adaptor operation.
Read more
MRP:$189.54 SAVE 17%
coming soon $157.95
FORTHCOMING
Fulltone Full-Drive 1	 Overdrive Pedal
Cat: 782522 Rel: 26 Sep 20
 
Overdrive pedal
Notes: Yes it's true, finally the sound of a late 90s to early 2000s Fulldrive with-OUT the boost channel! Simple as it comes... with Volume, Tone, Drive, and toggle bringing back the Flat-Mids (FM), Vintage, and the infamous (for assaulting the front end of tube amps) Comp-Cut (CC) modes. Simple True-Bypass switching, 9-18 volt operation. No need to find and pay $400-$600 for a 90's FD2 anymore.

Soundwise, this is based on the exact (full midrange) Comp-Cut that was in the earliest FD2s, not the Flatter mids CC in later models. So even though the FD-1 will have the Flat-Mids mode, the Comp-Cut is the fuller-mids version identical to the "pre FM/pre-MOSFET" versions of the FD2. This tiny pedal is the size of Fulltone's Mas-Malo, with top-mounted (also called rear mounted) jacks & power port, and a JRC4558 chip for your go-to overdrive sound. Come home.

size: 4.8" x 2.9" x 2.35"
Read more
MRP:$189.54 SAVE 17%
coming soon $157.95
FORTHCOMING
Empress Effects Distortion Pedal
Cat: 782987 Rel: 30 Sep 20
 
Distortion pedal
Notes: From mild to crunch to lead, the empress distortion does it all. This true bypass pedal offers three flavors of distortion while retaining a super tight low end and naturally compressing like a high gain amp.

The mild setting offers gentle break-up that cleans up with your volume knob. The crunch setting is tight, with good bite. The lead setting offers high gain with lots of sustain.

Gain control, two bands of EQ and output control allow you to tweak the sound to taste.

Input Impedance: 300k
Output Impedance: 5k
Frequency Response (-3dB): 20Hz - 12kHz
Power Input Voltage: 9V DC (Negative tip)
Power Input Connector: 2.1mm barrel connector (Negative tip)
Power Consumption: ~ 35mA
Enclosure Material: Die Cast Aluminum
Input connector: 1/4" Jack
Output connector: 1/4" Jack
Height (Enclosure only): 1.5"
Height (including controls): 2"
Length: 4.5"
Width: 2.5"
Weight: 0.5 lbs
Read more
MRP:$209.15 SAVE 17%
coming soon $174.29
FORTHCOMING
J Rockett APE Analog Preamp Experiment Pedal
Cat: 783154 Rel: 01 Oct 20
 
Preamp experiment pedal
Notes: The APE is a unique design and an accurate re-creation of a famous vintage tape delay's analogue section. This is not just a preamp but rather the entire analogue circuit from input to output including the sonic influence of the tape heads. It runs at 22.5v just like the original. For convenience it uses a DC to DC converter allowing you to power it with a simple standard 2.1/5.5mm 9v power supply just like most of the pedals on the market.
Read more
MRP:$260.13 SAVE 17%
coming soon $216.77
Artículos del 1 al 50 de 129 en la página 1 de 3
1  2  3  »

Filter

Coming Soon: Studio Equipment
Close