100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

Inicio  Coming Soon  

Studio Equipment

Options
Artículos del 1 al 50 de 97 en la página 1 de 2
1  2  »
FORTHCOMING
Behringer TD3 AM Analogue Bass Line Synthesiser (yellow)
Cat: 772986
 
bass line synthesiser
Notes: Only produced from 1981 to 1984, the Roland TB-303 was a tremendous commercial flop as a replacement for the bass guitar, however it soon found its place as one of the most-loved synthesizers for what became known as Electronic Dance Music (EDM). An ultra-affordable and faithful homage to the iconic synthesizer that spawned house music, plus an all-new Distortion circuit, the TD-3-AM lets you conjure up virtually any sound with incredible finesse and ease. With its pure analog signal path, 16-step Sequencer and authentic VCO, VCF and VCA filters, the TD-3-AM is sure to become one of your favorite synthesizers.

Great care has been taken in engineering the TD-3-AM, including the true to the original VCO, VCF and VCA designs and pure analog circuitry with matched transistors. This highly-focused attention to detail is what gives TD-3-AM its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects - all the way out to the otherworldly sounds of your imagination.

Your TD-3-AM comes ready to rock, thanks to its default signal routing that doesn't require lifting a single patch cable to instantly create amazing sounds. The highly-intuitive layout lets you easily tap into the inspired sounds of 1980s and '90s progressive rock, wave, EDM and synth-pop music tracks that made rock and roll history - or to design incredibly fat and original sounds that will make you a legend in your own right.

The very heart of TD-3-AM's sound is its versatile 24 dB/octave filter, which lets you freely experiment with the low-pass Cutoff frequency and Resonance settings to dial in the perfect sound.

TD-3-AM's authentic Voltage Controlled Oscillator (VCO) with transistor wave-shaping circuitry is ultra-easy to use and provides your choice of reverse-sawtooth or pulse waveforms for the ultimate in sound creation.

The onboard sequencer with 7 tracks allows you to program up to 16 steps of notes and rests and save them as a Pattern. You can record, save and recall up to 250 patterns, all of which can be stored in the 4 Groups. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode which allows you to interact while composing a pattern.

When you want to add even more power to your performance, just flip the Distortion On/Off switch and dial in the perfect amount of Drive to push the envelope to the max.

While it is a monophonic instrument (one note at a time), TD-3-AM's 16-note Poly Chain function lets you combine multiple synthesizers for up to 16-voice polyphony - plus provides vastly improved reliability and stability over its 1970s and '80s predecessors.

TD-3-AM has 11 controls and 28 switches to give you direct and real-time access to all important parameters, all laid out in a highly-intuitive format that puts the joy back into your music creation. And you can expand TD-3-AM's tone-sculpting capabilities beyond your wildest dreams by utilizing the multi-I/O patchbay to connect external devices.
Read more
coming soon $114.37
FORTHCOMING
Behringer TD 3 BK Analogue Bass Line Synthesiser (black)
Cat: 773200
 
line synthesiser
Notes: Only produced from 1981 to 1984, the Roland TB-303 was a tremendous commercial flop as a replacement for the bass guitar, however it soon found its place as one of the most-loved synthesizers for what became known as Electronic Dance Music (EDM). An ultra-affordable and faithful homage to the iconic synthesizer that spawned house music, plus an all-new Distortion circuit, the TD-3-BK lets you conjure up virtually any sound with incredible finesse and ease. With its pure analog signal path, 16-step Sequencer and authentic VCO, VCF and VCA filters, the TD-3-BK is sure to become one of your favorite synthesizers.

Great care has been taken in engineering the TD-3-BK, including the true to the original VCO, VCF and VCA designs and pure analog circuitry with matched transistors. This highly-focused attention to detail is what gives TD-3-BK its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects - all the way out to the otherworldly sounds of your imagination.

Your TD-3-BK comes ready to rock, thanks to its default signal routing that doesn't require lifting a single patch cable to instantly create amazing sounds. The highly-intuitive layout lets you easily tap into the inspired sounds of 1980s and '90s progressive rock, wave, EDM and synth-pop music tracks that made rock and roll history - or to design incredibly fat and original sounds that will make you a legend in your own right.

The very heart of TD-3-BK's sound is its versatile 24 dB/octave filter, which lets you freely experiment with the low-pass Cutoff frequency and Resonance settings to dial in the perfect sound.

TD-3-BK's authentic Voltage Controlled Oscillator (VCO) with transistor wave-shaping circuitry is ultra-easy to use and provides your choice of reverse-sawtooth or pulse waveforms for the ultimate in sound creation.

The onboard sequencer with 7 tracks allows you to program up to 16 steps of notes and rests and save them as a Pattern. You can record, save and recall up to 250 patterns, all of which can be stored in the 4 Groups. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode which allows you to interact while composing a pattern.

When you want to add even more power to your performance, just flip the Distortion On/Off switch and dial in the perfect amount of Drive to push the envelope to the max.

While it is a monophonic instrument (one note at a time), TD-3-BK's 16-note Poly Chain function lets you combine multiple synthesizers for up to 16-voice polyphony - plus provides vastly improved reliability and stability over its 1970s and '80s predecessors.

TD-3-BK has 11 controls and 28 switches to give you direct and real-time access to all important parameters, all laid out in a highly-intuitive format that puts the joy back into your music creation. And you can expand TD-3-BK's tone-sculpting capabilities beyond your wildest dreams by utilizing the multi-I/O patchbay to connect external devices.
Read more
coming soon $108.93
FORTHCOMING
Behringer 140 Dual Envelope/LFO Module
Cat: 772884
 
dual envelope & LFO module
Notes: This is the Behringer SYSTEM 100 140 DUAL ENVELOPE/LFO. An authentic reproduction of the original System 100M circuitry from the 80's that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the 140 DUAL ENVELOPE/LFO in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

The 140 DUAL ENVELOPE/LFO features 2 independent ADSR envelope generators that can be controlled via an external gate or manual triggering. Each envelope generator comes with a Manual Gate that you can press and hold to start the envelope cycle; independent Attack, Decay, Sustain and Release controls to adjust the rate of these parameters and 3.5 mm envelope outputs that allows you to send up to two positive wave forms out to two modules and one negative wave form.

The LFO on the 140 comes with 5 waveforms: sine, triangle, square, ramp and saw tooth. The Frequency Range switch which sets the oscillating frequency of the LFO along with the Frequency and Delay sliders gives the 140 unparalleled flexibility when it comes to shaping LFO's. You can also connect an external trigger switch which can work with the Delay control to phase lock the LFO to your keyboard playing.

Installing the 140 DUAL ENVELOPE/LFO is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 140 to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $108.93
FORTHCOMING
Behringer 121 Dual VCF Module
Cat: 772865
 
dual VCF module
Notes: This is the Behringer SYSTEM 100 121 DUAL VCF Module. An authentic reproduction of the original System 100M circuitry from the 80s that can fit in a standard Eurorack case, at a very affordable price. Mix the 121 DUAL VCF in with your existing rig or start your modular synth journey from here.

The 121 DUAL VCF features 3 CV inputs and 3-channel mixers per VCF; allowing you to independently mix all input signals. All of these inputs have their own attenuators to provide you more control over each signal that goes into the module.

Each VCF has its own output accompanied by a resonance slider that boosts resonance frequencies and a cutoff control to adjust the cutoff frequency of the lowpass filter. The 121 DUAL VCF also features a 3-mode Fixed HPF switch where you can select between Off, 1 (1 kHz), 2 (2 kHz) or 3 (5 kHz). Combine this with the resonance and cutoff sliders to create intricate and interesting patches.

Installing the 121 DUAL VCF is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 121 DUAL VCF to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $108.93
FORTHCOMING
Behringer 112 Dual VCO Module
Cat: 780465
 
analog dual VCO module
Notes: Eurorack module; two identical analog VCOs in one module.

Selectable waveforms: triangle, sawtooth and squarewave/pulse; adjustable pulsewidth and PWM CV input with attenuator; octave-switch and fine-tune control knob; hard and soft sync; 3 pitch CV inputs with attenuators;

Power consumption: 130mA (+12V) / 70mA (-12V); width: 16 HP; depth: 46mm
Read more
coming soon $108.93
FORTHCOMING
Behringer 960 Sequential Controller
Cat: 781518
 
controller module
Notes: An authentic reproduction of the circuitry from the Modular 55 series used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard EURORACK case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

100 mA +12V
50 mA -12V
0 mA 5V
47 mm deep
O 5.00


Read more
coming soon $142.69
FORTHCOMING
Behringer 921B VCO Module
Behringer 921B VCO Module (oscillator module)
Cat: 780467
 
VCO module
Notes: Enter the Behringer 921B OSCILLATOR. An authentic reproduction of the circuitry from the "Modular 55 and 35" series oscillators used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 921B OSCILLATOR module is controlled by the Behringer 921A OSCILLATOR DRIVER or can be used as a free-running LFO. Separate Frequency and Range knobs allow you to adjust the frequency range in semitones and in octaves. The 921B along with the 921A modules form the foundation of a proper modular synthesizer and the basis for some really great music.

The 921B OSCILLATOR features independent audio outs for each of the 4 waveforms which include sine, triangular, sawtooth and rectangular which can be patched out to different modules to unlock even more creative possibilities. A dedicated oscillator sync input and switch can be used to sync the 921B to a signal introduced into the Sync In jack. Parallel link jacks allow the 921B to link to other 921B in the chain.

Installing the 921B OSICLLATOR is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 921B OSICLLATOR to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $108.93
FORTHCOMING
ADDAC System ADDAC215 Dual S&H+ Module (black faceplate)
Cat: 776254
 
dual sample & holds module
Notes: This new module should not be judged by it's size, at 6hp it's packed with features.

At its core it features a noise source and two precision Sample & Holds with 0.01% of maximum deviation from the Input which allows for quantized signals to be sent through without any noticeable detuning or the typical voltage drops over time.

The Sample & Hold sections can also be used as a Track & Hold meaning it holds the incoming input while the Trigger input is ON and lets the input flow to the output when the Trigger input is OFF.
Each section also features it's own slew processor with a single control over attack and decay and an ON/OFF switch.

The noise signal is normalled to both sections inputs, meaning that without a jack plugged into the Input the sample and hold function will act upon the incoming noise signal generating random CV values.

The [Trigger A Alternate] switch allows to Link both sections so that any trigger input in Trigger A will alternate between triggering the A and B section.

Besides each section outputs there's also 4 extra outputs: Noise, Difference, Average and Sum. The Noise output is coming from the noise source, the Difference output is the subtraction of section A minus section B, the Average output is the sum of both A plus B and then divided by 2 and finally the Sum output is the sum of both A plus B sections.

MECHANICAL:
Format: Eurorack
Width: 6 HP
Depth: 4 cm

ELECTRICAL:
Max current: +50mA/-50mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$141.18
coming soon $136.16
FORTHCOMING
EMW Spectral Viewer Module (black faceplate)
Cat: 775790
 
spectral viewer module
Notes: The EMW SPECTRAL VIEWER module splits the audio frequency band and translates the individual bands into intensity color levels in a way that red represents low frequencies, green represents the mid frequencies and blue the high frequencies. A full audio material fed into the module will be translated into a dynamically multi-color visualization of the audio spectrum.

The EMW SPECTRAL VIEWER will add an extra dimension, with sound-activated dynamic colors to your modular.

Eurorack (3U) form factor - 12HP width

Connectors: 3.5mm

Depth: 50mm
Read more
MRP:$176.47 SAVE 19%
coming soon $142.71
FORTHCOMING
2hp Pitch Module (silver faceplate)
2hp
Cat: 766651
 
pitch module
Notes: Time domain pitch shifter with flutter control.
Read more
MRP:$143.79 SAVE 17%
coming soon $119.83
FORTHCOMING
Behringer 904B VC High Pass Filter Module
Cat: 772804
 
filter module
Notes: Enter the Behringer 904B VOTLAGE CONTROLLED HIGH PASS FILTER Module. A vintage-sounding authentic reproduction of the circuitry from the Modular 55 & 35 Series used by the world's most famous pop, rock and jazz musicians for their shows. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 904B VOLTAGE CONTROLLED HIGH PASS FILTER allows you to attenuate low frequencies and accentuate higher ones in a signal. With the Fixed Control Voltage knob, also known as a cutoff frequency, determines the frequencies attenuated below a certain point. Switch the Frequency Range between Low (4 Hz to 20 kHz) or High (10Hz to 50 kHz) to select what frequencies the Fixed Control Voltage affects. You can use the 904B to let you cut through a mix for some searing lead tones or pair it with the Behringer 904A VOLTAGE CONTRLLED LOW PASS FILTER and be prepared to hear some very interesting sounds.

Audio in and out connectors are available on the 904B that let you process an incoming signal before sending it to another module via a 3.5 mm TS cable. You can also use the Control Inputs to connect voltage signals from other modules to affect the cutoff frequency. Use this module to add distinct tweaks to your patches so you can create more unique sounds.

Installing the 904B VOLTAGE CONTROLLED HIGH PASS FILTER is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 904B VOLTAGE CONTROLLED HIGH PASS FILTER to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $108.93
FORTHCOMING
ADDAC System ADDAC103 T-Networks Module (black faceplate)
Cat: 776114
 
4-voice percussion module
Notes: Inspired by Twin T-Networks circuits used in many lengendary drum machines, ADDAC system have developed a simple and straight forward 4 voice percussion module with frequency controls for each of its voices.

At each voice input there's a gate to trigger converter so any input source is possible.
Audio inputs can also be used as an input, in this case and due to the nature of the gate to trigger converter, each voice can be used as very destructive filters.

The top 2 channels feature a higher frequency range, the bottom 2 channels feature a lower frequency range.

Tech Specs:
6HP
2.5 cm deep
40mA +12V
40mA -12V
Read more
MRP:$112.42
coming soon $107.83
FORTHCOMING
ADDAC System ADDAC812VU Module (black faceplate)
Cat: 776439
 
metering module
Notes: Stereo/dual VU metering module with buffered thru outputs for each channel.

An additional switch turns the beautiful lamps behind the VU meters off, in case your rack is running low on power!

A couple trimmers on the back of the module allows the user to define the VU range of each channel independently.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 3.5 cm

Electrical:
. Max current with lamps on: +100mA/-10mA
. Max current with lamps off: +10mA/-10mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$146.41
coming soon $141.61
FORTHCOMING
2hp Pitch Module (black faceplate)
2hp
Cat: 766655
 
pitch shifter module
Notes: Time domain pitch shifter with flutter control.
Read more
MRP:$143.79 SAVE 17%
coming soon $119.83
FORTHCOMING
SynthRotek LPG Low Pass Gate Module (black faceplate) (fully assembled)
Notes: The LPG is a West Coast Synthesis staple! The dual Low Pass Gate creates organic percussion timbres, paving the way for sonic exploration with a Buchla/Subotnick vibe.

The LPG has two low pass gates in one module. Its unique non-linear qualities emulate percussion timbres like congas, bongos, plucks, etc. The LPG is vactrol based, which creates natural-sounding decays. When the CV input is pinged by short/fast envelopes, it results in more organic sounds like bongos. The slide pot functions in two ways: when the the CV input is not patched, it attenuates/mixes the audio signal. When the CV jack is patched, it attenuates the output level and changes the timbre of the audio signal.

Each LPG channel can be used as a VCA. VCA mode bypasses the low pass filter and resonance and doesn't color the sound of your input audio. The vactrol gives the VCA a living, breathing, non-linear response.

A number of vactrols were tested for this module, and the pre-tested NSL-7053 yielded the most positive results. The NSL-7053 has a slower response and a more exponential response curve. The VTL5C4 has a slightly faster response and a more linear response curve. Vactrols have a lot of variance, so even if you use the same vactrols for both channels, each channel may sound a little different. But the LPG will work with a number of different types/brands, including dual vactrols. In fact, each channel can be built with a different set of vactrols. (Note: VTL5C3 and VTL5C3/2 vactrols are not recommended in the LPG.)

Specifications:
Width: 4HP
Depth: 57mm
Current draw:
+12V: 45mA
-12V: 45mA
Read more
MRP:$156.86 SAVE 19%
coming soon $127.44
FORTHCOMING
ADDAC System ADDAC213A Eurorack Bridge Module (black faceplate)
Notes: A pair of ADDAC213As acts as a simple one-cable bridge between different cases. By itself the ADDAC213As can send/receive 8 CV or audio signals between your cases, but can be expanded to bridge two cases for up to 24 signals at the same time.

Use a pair of ADDAC213As to send & receive 8 CV or audio signals between distant points in your case, between two separate cases, or between your case and a friend's case. Less clatter, less spaghetti, faster connection! There's nothing better than being able to connect that controller skiff with just one cable to your main system. At a gig, in the studio, when jamming with a friend, give yourself a gift by grabbing a pair of ADDAC213As.The modules can be installed in normal position or a 180 degree position to fit any need and any case design.

Each ADDAC213A module can be connected through a ribbon cable connection on its backside with up to two ADDAC213Bs. Each ADDAC213B module added expands the channels options of the ADDAC213A by adding 8 more channels. With two 2 ADDAC213Bs connected to each ADDAC213A module, you'll have a total of 24 channels going between your cases with a simple one-cable bridge. Between the ADDAC213A pair and the ADDAC213B, your cases never looked so elegantly connected together!

The ADDAC213As are always sold as a pair of 2 modules and an included ribbon cable.

Each module can be installed in normal position or at 180 degrees.

Mechanical:
. Format: Eurorack
. Width: 6 HP
. Depth: 2.4 cm

Electrical:
Passive / Does not draw current
Ribbon Cable: 50cm or 100cm ribbon cable
Read more
MRP:$107.19
coming soon $103.48
FORTHCOMING
EMW Fixed Filter Bank Module (black faceplate)
Cat: 774768
 
filter bank module
Notes: The EMW Fixed Filter Bank adds color and different shades into the sounds. It contains 8 bandpass filters used to attenuate or accentuate frequencies throughout the audio range.This module can easily modify the waveforms produced by an oscillator, creating very interesting and dynamic variations. When the controls are djusted to accentuate the frequency range, resonances are produced, resulting in very unique sounds. This is an essential module to achieve more flexibility and exclusive timbres with your modular setup.

Read more
MRP:$172.55 SAVE 19%
coming soon $139.44
FORTHCOMING
ADDAC System ADDAC306 VC Transitions Module (black faceplate)
Cat: 776305
 
VC transitions module
Notes: ADDAC306 is a 5 channel multi-directional CV generator.

You can think of it as a "sweet spot" controller, or a hands-on way of transiting from one state to another.

Each of the five channels has MINIMUM, SPAN and DIRECTION controls, a common CV IN and a common TRANSITION CONTROLLER slider.

MINIMUM sets the minimum channel voltage.

SPAN sets the voltage range of the channel.
It essentially sets the maximum voltage that can be output from the channel, relative to what the current channel MINIMUM is. For a given SPAN value, if the MINIMUM voltage is changed then the maximum voltage output from that channel will also change respectively.

DIRECTION sets whether the voltage transition for each channel goes from MINIMUM to maximum, or maximum to MINIMUM.

The TRANSITION CONTROLLER slider controls the transition from the minimum value (A) to the maximum value (B) or vice versa, according to the settings of each independent channel.
Moving this slider generates 5 different voltages with 5 different ranges and directions. The transition can also be operated from a CV source at the CV IN, in which case the slider position acts as an attenuator for the incoming voltage.

The maximum range of each channel can be set to either 5 or 10 volts, by 5 jumpers in the back of the module. Only positive voltages are generated at the output.

Using the CV IN you can use two ADDAC306 modules to expand your control options to 9 voltage outputs under one common slider control.
Use the VC Transitions to multiply the polyphony of a single CV sequencer by passing its outputs through the ADDAC207.
VC Transition makes for an awesome state transition controller. Plug its outputs to various CV controller parameters of your audio effects modules. Set the slider to position A, and set the minimum values for each channel. Then move the slider to position B and set the SPAN settings for each channel. Use the TRANSITION CONTROLLER slider to morph from state A to state B and backwards. Flip the DIRECTION switches to change the direction of the transition for each channel. Use the CV IN to automate the transition using LFOs, ADSRs or sequencers.
Plug the output of your ADSR envelope to the CV IN and set the channels differently to get 5 different ADSRs from one common source.


This module was developed based on an initial idea by Konstantine Fioretos.
Read more
MRP:$134.64
coming soon $130.71
FORTHCOMING
TC Electronic Brainwaves Pitchshifter Pedal
Cat: 781362
 
Pitchshifter pedal
Notes: Exceptional pitch shifter with studio-grade algorithms, 4 octave dual voices and groundbreaking MASH footswitch.

With its mind-bending range and kaleidoscopic pitch effects, the studio-grade BRAINWAVES PITCH SHIFTER is the perfect fusion of brains and brawn.

This pink-clad pitch professor masters a variety of polyphonic effects including whammy and detune, plus a bunch of others - thanks to the dedicated TonePrint app.

The award-winning MASH footswitch packs expression pedal performance into a pedalboard-friendly size.

Pitch-shifting mode expands your sound by adding up to two extra voices and letting you decide whether these voices go above or below the original signal.

Just imagine - the solo from "Owner of a Lonely Heart" never sounded so huge.

And since BRAINWAVES is polyphonic, you can use it on your standard-tuned guitar for a wide range of rock-solid sharp or flat tunings - without detuning the actual instrument.

With separate voices pitched in either direction, the polyphonic algorithm lets you easily process pitch-shifted chords, riffs, and furious flurries of single-notes. Since each voice is adjustable from unison to two octaves up or down (and anything in between), BRAINWAVES has more range than an interstellar battle cruiser. You can quickly create custom pitch settings via the free TonePrint app to find or expand your own pitch personality.

Whammy mode packs a powerful fistful of sonic punch. With 2 individually programmable voices, you can instantly go from nice and sweet, to a 2-octave, dive bomb explosion - just by MASHing the footswitch.

Detune mode lets you widen your sound for a more open, sweet and dynamic tone. Unlike most chorus effects, detuning plays really well with complex chord voicings, even those drenched in distortion.

BRAINWAVES also nails the squeaky clean, watery '80s tones we all know and love. Or slap on some dirt and dial up a shallow detune for the secret thickening agent from Van Halen's post-1984 tone. MASH down the footswitch for an extra dose of instant detune goodness; the Mix knob lets you blend in just the right amount of effect, keeping your sound balanced - even at extreme settings!

The BRAINWAVES PITCH SHIFTER features groundbreaking new technology that brings a wide range of creative expression to the party, controlled solely by how much pressure you apply to the depressed footswitch.

Years in the making, and only available in select TC Electronic products, this clever innovation elevates the common footswitch well above rather mundane duties, such as "On" and "Off". More importantly - MASH elevates your performance to the next level.

TonePrint means signature effects - and signature effects means truly creative tones.

With optimized headroom, True Bypass or Buffered Bypass switch and Kill-Dry on/off, this pedal guarantees optimal tonal integrity and zero loss of tone. And, no matter if the pedal is on or off your precious dry sound is always passed through the pedal unharmed in all it's pure analog glory due to an Analog-Dry-Through.

Download the free TonePrint app for Android and iPhone, choose the TonePrint you want to hear and beam it instantly from your phone through your guitar's pickup into your TonePrint pedal. No cables needed!
Read more
coming soon $122.00
FORTHCOMING
TC Electronic TC8210-DT Reverb Plug-in with Dedicated Hardware Controller
Cat: 781357
 
Reverb plug-in
Notes: Classic Mixing Reverb Plug-in with Dedicated Hardware Controller

Sound:
Sample rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz

Software Support:
Operating systems: Mac OS X 10.13 Sierra or above, Windows 7 or above
Drivers: No additional drivers required, uses standard USB HID drivers
Plugin formats: AAX-native, Audio Units, VST2.4, VST3. 64 bit

USB Connection (DT version)
Type: USB 2.0, type micro-B

Power (DT version)
Power supply: USB bus powered
Power consumption: Max. 2.5 W

Physical (DT version)
Dimensions (HxWxD): 42 x 54 x 135 mm (1.7 x 2.1 x 5.3")
Weight: 0.22 kg (0.48 lbs)
Read more
coming soon $100.21
FORTHCOMING
SynthRotek 308 Distortion Module (black faceplate) (fully assembled)
Notes: Get ready for the bright lights of the colosseum!

SynthTotek have taken the rock-solid RAT clone, squeezed it into a Eurorack module and added CV control over Gain. The 308 will take your playing to new heights with tremolo and other distortion modulation techniques.
Read more
MRP:$125.49 SAVE 19%
coming soon $101.29
FORTHCOMING
SynthRotek ADSR Envelope Generator Module (black faceplate) (fully assembled)
Cat: 778161
 
ADSR envelope generator module
Notes: The Synthrotek ADSR is a small and simple envelope generator with some very useful features. CV is additive for overall length of ADR stages in ADSR mode and add even more length to just the Release stage by adding CV into the Release jack. AR mode allows for snappy to long dynamic rhythm lengths. Very short minimum lengths, self cycling and a maximum output of 5 volts makes this tiny (4HP) envelope a very feature packed and versatile module.

Read more
MRP:$156.86 SAVE 19%
coming soon $127.44
FORTHCOMING
SynthRotek ECHO Voltage Controlled Echo Module (black faceplate) (fully assembled)
Cat: 778205
 
voltage controlled echo module
Notes: The ECHO (formerly known as the EKO) is a compact voltage-controlled echo/delay comes in the very tidy size of 4HP and is certain to be one of the best bangs for your buck.

A very unique echo using the PT2399 IC featuring Voltage Controlled Rate. Manual controls for Rate, Feedback, and Mix. Beautiful and bizarre, CV modulation of the rate brings in ghostly pitch bent sounds to metallic reverbs. An effects module that everyone needs in their rig.

ECHO Rate CV accepts -5 / +5 voltages (although the negative range is almost -7)

ECHO Rate knob is setup to push the chip into extreme territory and will extend past the "useable" range of the PT2399 IC, meaning that once you turn the knob past 3 o'clock or so, the chip will stop operating and you'll only hear your dry signal.

Attenuation, attenuversion, or using an offset will greatly help when running voltages into the Rate CV input. This way, you can tailor the modulation as you see fit. You will absolutely get the most out of your ECHO by using modules that attenuate, invert or offset your signal.
Read more
MRP:$125.49 SAVE 19%
coming soon $101.29
FORTHCOMING
EMW Chorus Module (black faceplate)
Cat: 775233
 
chorus module
Notes: Stereo chorus module
Read more
MRP:$155.56 SAVE 20%
coming soon $124.18
FORTHCOMING
EMW Phaser 4 Four Stage Analogue Phaser Shifter Module (black faceplate)
Notes: The EMW analog 4-stage Phaser produces one of the deepest and most powerful effects used in electronic music. The analog phase-shifter effect differs a lot from the one created by digital processors mainly because it features a warm and penetrating sound characteristic that is very hard to emulate, This is a must have module for any modular synthesizer setup.
Read more
MRP:$189.54 SAVE 22%
coming soon $148.15
FORTHCOMING
ADDAC System ADDAC105 4 Voice Cluster Module (black faceplate)
Cat: 776118
 
4-voice cluster module
Notes: Following the ADDAC103 T-Networks, this new module is inspired by it's simplicity. This is a 4 voice Square Oscillator with VCA, FM switch and a slew decay for the incoming Trigger IN. All voices are then sent through a Multimode Filter.

Each voice has it's own VCA input where any input is accepted (Trigger, Gate, CV) The [DECAY] controls the slew decay applied to the incoming signal, if [DECAY] is fully anti-clockwise then it works as a Mute. The [FM ON] switches activate/deactivate the FM input coming from the previous voice: Voice 1 FM comes from voice 4, voice 2 FM comes from voice 1, and so on, so you can FM all of them in a FM loop.

All 4 voices are summed and sent through a filter with controls over [CUTOFF] with an Attenuverter for the CV input and [RESO- NANCE]. Three filter outputs are provided [LOWPASS], [BANDPASS] and [HIGHPASS]

The [EXTERNAL IN] input can be routed through a jumper on the back of the module allowing the incoming signal to go to:
the filter input for processing an external audio source.
all of the 4 voices Frequency control allowing for some experi- mental CV control over pitch of all 4 voices at the same time (due to the specificities of the circuit and to keep the module at a low price these inputs are not callibrated to 1v/octave).

Read more
MRP:$112.42
coming soon $107.83
FORTHCOMING
EMW Arcade Noise Generator Module (black faceplate)
Cat: 774771
 
noise generator module
Notes: The EMW ARCADE Noise is a very unique digital noise generator that can create a wide range of sounds, which covers old video game consoles and arcade machines, dense digital and dark noisy sound atmospheres. It has several CV inputs for controlling the generator algorithm, frequency, reset point and operation mode. The module can also be connected to a standard VCO to create noises that can be played together with that VCO, a very powerful feature.

Eurorack (3U) form factor - 8 HP width
Power consumption +12V [37mA] / -12V [0mA]
Connectors: 3.5mm
Weight 113g
Depth: 50mm
Read more
MRP:$163.40 SAVE 21%
coming soon $129.64
FORTHCOMING
Behringer MIC2200 v2 Vacuum Tube Mic & Line Preamplifier
Cat: 780469
 
tube microphone/line preamplifier
Notes: Tubes can really warm up a signal fast, giving it increased depth and character. Though transistors have succeeded the technology, many musicians agree that tubes deliver a far superior sound. A true audiophile 2-channel Mic/Line preamplifier, the ULTRA GAIN PRO MIC2200's hand selected 12AX7 vacuum tube gives everything from microphones to acoustic or bass guitars that vintage tube vibe in a dependable and highly-affordable package. The onboard fully parametric EQs provide unparalleled tonal characteristics, allowing you to sculpt instrument and vocal sounds with the ultimate precision and musicality.

The MIC 2200 is perfect for studio and live applications. The balanced 1/4" TRS and gold-plated XLR inputs and outputs give you maximum flexibility in either scenario. It derives its personality from a hand-selected 12AX7 tube for superior tube character and low-noise operation. The MIC 2200 is ideally suited for use with standard digital recorders and sound cards, imbuing signals with the warmth, presence and classic tube-compression that will bring your digital tracks to life.

The incredible MIC2200's controls consist of: switches for +48 V phantom power, Phase Reverse, Lo Cut, EQ Frequency Range and EQ In/Out; plus Mic Gain, Lo Cut Frequency Octave Bandwidth, Level and Output knobs. A 12-segment LED meter provides accurate monitoring of output levels. And when used as a high-end DI (Direct Injection) box in the studio or on the stage, the MIC2200 delivers flawless performance and outstanding signal integrity. For further tone conditioning, the MIC2200 features a fully parametric EQ with adjustable center Frequency, Bandwidth and Level per channel. Both channels also feature independent phase reverse switches for maximum versatility.

The ULTRAGAIN PRO MIC2200 gives you the sound quality of a 2-channel vintage tube preamp and high-end DI box all-in-one - at a mere fraction of what a true relic of the 1960s would cost.
Read more
coming soon $129.62
FORTHCOMING
Audio Technica AT2020 Large Diaphragm Condenser Microphone (chrome)
Cat: 783291 Rel: 31 Jan 21
 
Large diaphgragm condenser microphone
Notes: The AT2020 sets a new standard of performance and quality in studio condenser microphones at this price level. Its low-mass diaphragm is custom made for extended frequency response and superior transient response. With a very low intrinsic noise level, it is perfectly suited to current digital recording equipment. This microphone offers a wide dynamic range, and easily holds high sound pressure levels. Its rugged construction is designed to last for years.

Ideal for projects / home studio
At a very affordable price, the AT2020 is the best choice for a first cardioid condenser studio microphone, combining performance, quality, robustness and versatility.

High spl handling
Its high sound pressure level (144 dB) and exceptional dynamic range make the AT2020 particularly versatile.

Robust Construction
Technical design and advanced manufacturing ensure compliance with Audio-Technica's strict standards of consistency and reliability.

Cardioid capsule
The O16 mm made to measure diaphragm, provides superior transient response over the entire frequency range.

Very versatile
It is suitable for recording voice, instruments (percussion, piano, brass, winds, Leslie amp or guitar).

Swivel mounting
The AT8466 attachment comes with the AT2020 can be installed on a conventional microphone stand, or on a tripod.

Carry case
The AT2020 comes with a soft protective pouch for easy storage and transport.

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20 - 20,000 Hz
Open Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 144 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 124 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 74 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 48V DC, 2 mA typical
Weight: 345g
Dimensions: 6.38" (162.0 mm) long, 2.05" (52.0 mm) maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories Included: Stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
Read more
MRP:$150.33 SAVE 17%
coming soon $125.27
FORTHCOMING
SynthRotek Octave Fuzz Module (black faceplate) (fully assembled)
Notes: The Octave Fuzz is SynthRotek's take on the classic 70's SuperFuzz circuit, made into a Eurorack module, which has improved on some aspects of the original as well, including an increased output.

Two distinct voices like the original: switchable between scooped midrange and massive midrange bump.

Aggressive: It will sound massive and in-your-face like no other circuit can. This is for sonic explorers and heavy music only. In short, it's not useful for EVERYTHING, but the things it DOES do it excels at. Sounds especially killer for keyboard and bass sounds.

Tuned to give a subtle distorted waveform one octave up via wavefolding (see the video to view this on an oscilloscope). (Completed modules come pre-tuned; there are calibration instructions at the end of the assembly instructions for the kits)

This circuit has been optimized for Eurorack. You can find a guitar pedal version here.

Current Draw:
32mA @ +12v
24mA @ -12v
0mA @ +5v
Read more
MRP:$156.86 SAVE 19%
coming soon $127.44
FORTHCOMING
SynthRotek Cosmic ECHO Delay Pedal (fully assembled)
Cat: 778344
 
delay pedal
Notes: The Cosmic ECHO is an analog-sounding lofi delay that will work with just about anything you plug into it. The dark, lush, moody tones of the ever-popular PT2399 IC provide an out-of-this-world experience. This new take on this classic pedal pushes the chip's limits so you can explore all the gritty elements drifting at the edge of long delay rates. It already outperforms other bucket brigade style echoes, but just to be sure, we added 2 momentary switches, Zone and Warp.

Contains PT2399 IC, a bucket brigade style emulation. This IC has 16-bit sampling for 30-300 milliseconds. After that, the sample rate goes down in relation to the delay length. This results in artifacts and noise being introduced into the audio for weird, cosmic, psychedelic sounds.

Read more
coming soon $102.39
FORTHCOMING
Rat King Modular TONE Module (fully assembled)
Cat: 778076
 
VCO module
Notes: The TONE is an analog voltage controlled oscillator with a wide frequency range and 8 trackable octaves. It uses the Alfa AS3340 chip (a CEM3340 clone), famous for its outstanding sound quality. This is the fully assembled version of the VCO.

Specifications:

Width: 8HP
Depth: 22mm
Power draw:
+12V: 20mA
-12V: 19mA
Includes power cable and module screws.
Read more
MRP:$143.79 SAVE 19%
coming soon $116.55
FORTHCOMING
SynthRotek DLY Delay Module (black faceplate) (fully assembled)
Notes: The Synthrotek DLY is a PT2399 bucket-brigade delay module. The PT2399 IC delivers warm and lush analog-sounding tones (the IC is partially digital). The DLY is similar in tone to our ECHO Eurorack module, but its features make it unique in its own right.
Unlike the ECHO which always has a wet signal (i.e. the output is always mixed in with the input), the DLY offers a true wet/dry Mix knob. When the Mix knob is fully counter-clockwise, you get a dry signal. When it is fully clockwise, you get a fully wet signal. This allows the user to plug this delay into effects loops. Also, the DLY allows for CV over Feedback and has an internal Feedback amount trimpot for precise adjustment.

Another added feature is the delay Rate range internal trimpot, which allows you to dial in the delay range of your choice. Turn the Rate knob all the way up to get the extreme, chaotic sounds of an over-clocked PT2399 chip.

Read more
MRP:$156.86 SAVE 19%
coming soon $127.44
FORTHCOMING
ADDAC System ADDAC111B Ultra .WAV Player Expansion Module (red faceplate)
Notes: The ADDAC111B EXPANSION allows the user to access the first 8 files (a to h) through a trigger.

Files do not play simultaneously, if several triggers happen at the same time top priority goes from top to bottom- meaning that if B E and F triggers are received at once the file that will be played is file B.

The expansion module should be plugged to the back of the Ultra .Wav Player module. There's no connection to the bus boards.

Specificaitons:
Mechanical:
Format: Eurorack
Width: 16 hp
Depth: 3 cm

Control voltage i/o:
CV inputs: i 5v
CV outputs: 0 +10v

Electrical:
Max current: 150ma
Compatible with +-12v and +-15v power supplies
Bus board cable: 8x2 idc (doepfer style) connect
Read more
MRP:$134.64
coming soon $129.62
FORTHCOMING
EMW Voltage Controlled Filter OB12 Module (black faceplate)
Cat: 774627
 
voltage controlled filter module
Notes: The EMW VCF OB12 is a12db/oct State Variable VCF carefully designed to produce a very 'fat' and deep sound. It features a 2-input audio mixer, 2 odulation inputs, and separate LPF and HPF outputs.
Read more
MRP:$171.24 SAVE 21%
coming soon $135.07
FORTHCOMING
ADDAC System ADDAC216 Sum & Difference Module (black faceplate)
Cat: 776260
 
sum & difference module
Notes: There are two equal sections in this module labeled A and B.

This module is a peculiar type of mixer that instead of just summing two input signals (X & Y) it also allows the possibility to subtract the two signals.
It works both for audio and CV signals and hence the possibility to get the diference of two CVs or cancel the phase of two audio signals. The resulting signal, of sum or subtraction, is then routed through a switchable (on/off) full rectification circuit labeled: Absolute. After this the gain of the mixed signal goes through another attenuverter labeled: Amplitude to control the resulting signal gain which, being an attenuverter, also allows the possibility to invert the incoming signal. After the Amplitude comes an AC/DC coupling switch followed by an bipolar Offset knob.

Besides the normal output, there's also an inverted output for each of the A & B sections.

The outputs of section A & B are also summed and sent to the Average Output.

Using a single input, just the X or Y input, the module can also be used as a simple dual Attenuverter & Offset CV processor with full rectification and AC coupling options.

Average mix output of both sections.
Read more
MRP:$141.18
coming soon $136.16
FORTHCOMING
ADDAC System ADDAC300 Power Starvation Module (150mA version) (red faceplate)
Notes: Power starvation is the first hack that any "DIY'er" learns. It's also one of the hacks that can generate some of the most interesting sonic effects in circuit bending, and ADDAC have applied this principle to the modular world. Plug any module of your choice through it and independently tune it's i power.

This will have most interesting effects in analog modules: filters, delays, mixers. They can either go silent or start screaming at your ears, going berserk with the lack of current to behaving normally.

Two IDC connectors on the back allow to independently plug 2 modules of your choice.

Bypass switches for easy operation.

The trimmers allow for setting a minimum voltage plateau. Most modules will shut down from 3 to 10v. These trimmers allow to set them at the right sweet spot and enjoy the full range of the pot for the power starving.

This module uses special potentiometers which are way more expensive than regular ones.

Specs:
. Passive Module
. Width: 4 HP
. Depth: 4 cm
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$134.64
coming soon $130.71
FORTHCOMING
ADDAC System ADDAC305 Manual Latches Module (red faceplate)
Cat: 776301
 
manual latches module
Notes: The ADDAC305 Manual Latches is a combination of 8 manual latching switches in a small and elegant module: each button toggles between Gate high / Gate low when pressed, outputting a 5V gate signal. Additionally 4 of the 8 available latches, sport inputs and can act as manual latching switches, allowing the incoming signal to pass to the output when the button is toggled.

MECHANICAL:
Format: Eurorack
Width: 8 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
Gate outputs: 0 +5v

ELECTRICAL:
Max current: 10mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$107.19
coming soon $103.48
FORTHCOMING
EMW T-Drum Module (black faceplate)
Cat: 775421
 
drum module
Notes: The EMW T-DRUM module is a 12-bit/high sample rate sample player with 6 internal drum Kits derived from famous drum machines. The sample selection was carefully made and includes the best of the 70's and 80's, from the glorious Roland TR and DR series to E-mu, Oberheim and SCI units. The trigger input responds with very low latency to trigger signals from 3 to 15V. and you can control the pitch and the internal sound selection by external CV, which allows the creation of random rhythm patterns.

Eurorack (3U) form factor - 6 HP width
Power consumption +12V [17mA] / -12V [7mA]
Connectors: 3.5mm
Weight 100g
Depth: 50mm
Read more
MRP:$176.47 SAVE 22%
coming soon $138.34
FORTHCOMING
EMW CV To DMX Interface Module (black faceplate)
Notes: CV To DMX interface for lighting and special effect control.

Connectors: 3.5mm

Depth: 50mm
Read more
MRP:$156.86 SAVE 19%
coming soon $127.45
FORTHCOMING
EMW Logic 202 Logic Functions Module (black faceplate)
Notes: The Logic 202 module has 3 main sections with 5 distinct logic functions. It’s a very useful unit that allows you to create alternative activation logic sequences.
The "AND" function output only goes high when both A and B inputs are high. The "OR" function output goes high when either A or B inputs are high. The FLIP-FLOP toggles between two states (HIGH/LOW) when a pulse is detected on its input. If it’s low (0V), a pulse turns it to high (+5V) and it stays in this state until the next pulse comes in. Additionally we have included a 4-stage pulse divider with reset.

Eurorack (3U) form factor - 16 HP width
Power consumption: +12V [70mA] / -12V [0mA]
Weight: 171g
Depth: 50mm
Read more
MRP:$150.33 SAVE 20%
coming soon $120.92
FORTHCOMING
EMW Voltage Comparators Module (black faceplate)
Cat: 775728
 
voltage comparators module
Notes: The Voltage Comparators module is used to trigger other modules as a function of a certain incoming voltage level. This module has four units, two of them producing a stable level output and the other two producing short trigger pulses. The outputs normally remain in zero volts (low) until the incoming voltage source reaches the adjusted level (0-10V.). When it happens the correspondent output goes high. The LEVEL OUT remain high while the incoming voltage keeps a level equal or greater than the adjusted voltage, while the TRIG. OUT produce a single trigger pulse under the same condition.

Eurorack (3U) form factor - 10 HP width
Power consumption: +12V [42mA] / -12V [15mA]
Weight: 114g
Depth: 50mm
Read more
MRP:$126.80 SAVE 19%
coming soon $102.39
FORTHCOMING
Rat King Modular EVENT Module (fully assembled)
Cat: 778067
 
VCO/envelope/slew limiter/waveshaper/LFO/envelope follower module
Notes: VCO, envelope, slew limiter (portamento), waveshaper, LFO, envelope follower- The EVENT does it all, making it one of the most versatile analog modules available.

Controls:

ONSET: Controls the positive rate (time) of change in voltage. It has a bipolar CV input jack.
DURATION: Controls the negative rate (time) of change in voltage. It has a bipolar CV input jack.
HEIGHT: Controls the held voltage level when a continuous gate is applied.
TRACK: 1v/oct input. It is particularly useful when patching the EVENT as a VCO.
START: A simple gate/trigger/pulse input that initiates a cycle when the EVENT is patched as a voltage controlled envelope.
SIGNAL input: Can be a constant or fluctuating voltage. This input is particularly useful for mangling CVs.
SIG OUT: The main output, the result of the gate/trigger/pulse input or SIGNAL input.
PLS DLY: A short pulse used for triggering other events as pulse delay (or as self trigger when patching the EVENT back into itself).

Specifications:
Module width: 8HP
Module depth: 22mm
Current draw:
+12V: 50mA
-12V: 43mA
Read more
MRP:$143.79 SAVE 19%
coming soon $116.55
FORTHCOMING
ADDAC System ADDAC602 Passive Ring Modulator Module (red faceplate)
Cat: 776350
 
ring modulator module
Notes: A dual channel classic Passive Ring Modulator, with transformers and germanium diodes.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 3.5 cm

Electrical:
. Passive
Read more
MRP:$134.64
coming soon $130.71
FORTHCOMING
SynthRotek VCO Analog Voltage Controlled Oscillator Module (black faceplate) (fully assembled)
Notes: The VCO is an analog voltage controlled oscillator with a wide frequency range and 8 trackable octaves. It uses the Curtis CEM3340 reissue chip, which is famous for its outstanding sound quality. This is the fully assembled version of the VCO.

Specifications:
Width: 4HP
Depth: 53mm
Power draw:
+12V: 42mA
-12V: 31mA

Includes power cable and module screws.
Read more
MRP:$156.86 SAVE 19%
coming soon $127.44
FORTHCOMING
Old Blood Noise Signal Blender Parallel Effect Blender/Mixer/Router Pedal
Cat: 782163 Rel: 24 Sep 20
 
Effect blender/mixer/router pedal
Notes: The Signal Blender provides a number of parallel routing solutions through its use of a pair of send/returns, primary input and output, switching, and volume control.

Signal Blender can be used as a:
Parallel effect blender
3-to-1 mixer
1-to-3 splitter
Active ABY in either direction
Volume level setter

and more.

A courtesy 9V power outlet and phase correction switches for both Sends add further versatility to this box. Clever switching allows for latching or momentary on/off action.

The Signal Blender uses standard 9V center negative power, and has a current draw of 31 mA.
Read more
MRP:$155.56 SAVE 17%
coming soon $129.64
FORTHCOMING
Division 6 CEM3340 VCO Module (black faceplate)
Cat: 777957
 
VCO module
Notes: This Voltage-Controlled Oscillator is based on the Curtis CEM3340 IC.

Specifications:
Power supply: +/- 12V to 15 VDC
Power connection: Eurorack 10-pin shrouded header (Can hook wires to pin holes instead if not building for Eurorack)
Current draw: 9mA (+12V) / 6mA (-12V) / 0mA (+5)
Dimensions, main board: 50mm x 60mm
Eurorack HP: 4
Eurorack depth: 64mm
Read more
MRP:$156.86 SAVE 19%
coming soon $127.44
FORTHCOMING
Hungry Robot Output Module Desktop Module
Cat: 780994 Rel: 17 Sep 20
 
Output module
Notes: The Hungry Robot Output Module allows users to interface your modular system with headphones, speakers, and recording interfaces. It uses a high quality amplifier circuit to boost the signal to the level you need. It accepts both mono and stereo signals. Plug in you inputs and output however you need, internal switching will automatically route the signal to where it needs to be based on what you have plugged in. As with all Hungry Robot "Modular Boxes" the Output Module can be powered with a simple 9V DC, Negative Center power supply.

KNOB
-VOLUME: Controls the overall volume of the output. Adjust to taste.

PATCH POINTS
-IN(L/MONO): Left input. Use this if you are running mono and want it split into stereo.
-IN(R): Right Input
-OUT(L/STEREO): Left output. Use this for stereo situations (TRS/Headphones)
-OUT(R): Right Output

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel
Read more
MRP:$122.88 SAVE 17%
coming soon $102.39
FORTHCOMING
Miditech i2-61 Black Edition USB MIDI Masterkeyboard
Cat: 784359 Rel: 10 Oct 20
 
USB MIDI masterkeyboard
Notes: The i2-61 offers the user 61 dynamic keys for the best price!

Class Compliant: Works without drivers on Mac OS/X, Apple iOS 4.2, Windows XP SP2, Windows Vista, Windows 7 and Windows 8

Inclusive free Miditech software bundle (download versions): Toontrack EZ Drummer lite, Magix Samplitude Silver, Makemusic Finale Notepad, Ik Multimedias Amplitube CS and Imagelines Poizone Synthesizer.
Read more
MRP:$160.79 SAVE 19%
coming soon $129.64
FORTHCOMING
ADDAC System ADDAC402B HRG Expansion Module (red faceplate)
Cat: 776312
 
MIDI expansion module
Notes: ADDAC402B MIDI Expansion allows full I/O Midi control of ADDAC402 plus access to a powerfull midi interface, with:

Midi Sync:
Allows the module to synchronize with any external MIDI device’s Clock, including transport messages like play, stop and continue.

CV to MIDI:
5 CV inputs (Fills 1 to 4 and Assign) to MIDI Notes and/or CC messages, the Note and CC number can be independently configured via the Configuration Menu.
These CV inputs can be sent on independent MIDI Channels, for ex: Fills 1 to 4 on MIDI Channel 1 and Assign on MIDI Channel 2.

MIDI Controller:
All panel controls (9 knobs, 4 toggle switches and 11 push buttons) can be sent to MIDI Out as CC controls as any standard MIDI controller. The individual CC numbers can be configured through the Configuration Menu.

MIDI to Gate:
All 4 Gate outputs can be controlled/sequenced from an external MIDI device.
For ex: we can configure Gate 1 to be responsive to CC 1, Gate 2 to CC 2 and so on. Everytime CC 1 gets a value of 127 Gate 1 will be turned ON, if it gets a 0 value Gate 1 will be turned OFF.

MIDI Control:
All panel controls (9 knobs, 4 toggle switches and 11 push buttons) can be controlled/sequenced from MIDI CC controls. This allow full automation of the module via MIDI
The individual CC numbers can be configured through the Configuration Menu and includes a midi learn feature for easier configuration.
Also controllable via MIDI is the change of Presets and Modes.
Read more
MRP:$112.42
coming soon $108.93
Artículos del 1 al 50 de 97 en la página 1 de 2
1  2  »

Filter

Coming Soon: Studio Equipment
Close