100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

Inicio  Coming Soon  

Studio Equipment

Options
Artículos del 1 al 50 de 131 en la página 1 de 3
1  2  3  »
FORTHCOMING
Behringer 150 Ring Mod/Noise/S&H/LFO Module
Cat: 772880
 
150 ring/mod/S&H/LFO module
Notes: This is the Behringer SYSTEM 100 150 RING MOD/NOISE/S&H/LFO. An authentic reproduction of the original System 100M circuitry from the 80's that can fit in a standard Eurorack case- at a very affordable price. Mix the 150 RING MOD/NOISE/S&H/LFO in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

The 150 RING MOD/NOISE/S&H/LFO comes with a ring modulator to create some metallic and bell-like sounds that can be applied to any signal such as a sine wave or a signal from an LFO via the EXT SIG X/NOISE and EXT SIG Y/LFO jacks and out the RING MOD output. The LFO features 5 waveforms including sine, triangle square, ramp and sawtooth. Parameters can be further adjusted by the FREQ and DELAY sliders.

If you want to start layering your song on a droning note or maybe just create some ambience in your music, then you can connect any external signal source into the S&H circuit. A 3-way selector switch allows you to select which type of signal being introduced into the SIG IN jack whether its External Input, LFO or Noise.

Installing the 150 RING MOD/NOISE/S&H/LFO is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 140 to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $87.98
FORTHCOMING
Behringer 3 Tier Eurorack Module Stand Case
Cat: 780468
 
module stand case
Notes: Behringer Eurorack Stand 3-Tier; desktop stand for mounting up to 3 Eurorack 104 cases (item 463669), or 3 Behringer synthesizers (e.g. Pro-1, Wasp Deluxe, K-2, Neutron, Model D, Cat).

Variable width (70 HP, 80 HHP or 104 HP); rugged aluminum/steel construction.
Read more
coming soon $68.43
FORTHCOMING
Behringer 903A Random Signal Generator
Cat: 772802
 
signal generator
Notes: Enter the Behringer 903A RANDOM SIGNAL GENERATOR Module, a vintage-sounding noise generator from the '70s. An authentic reproduction of the circuitry from the "Modular 55" series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

Enter the Behringer 903A RANDOM SIGNAL GENERATOR Module, a vintage-sounding noise generator from the '70s. An authentic reproduction of the circuitry from the Modular 55 series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 903A RANDOM SIGNAL GENERATOR generates both white and pink noise via two 3.5 mm outputs each allowing you to send different signals to other modules in your rig.

Installing the 903A RANDOM SIGNAL GENERATOR is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 903A RANDOM SIGNAL GENERATOR to be mixed with other synth modules for a truly unique set up.

Read more
coming soon $56.49
FORTHCOMING
Behringer 173 Quad Gate/Multiples Module
Cat: 772876
 
quad gate & multiples module
Notes: This is the Behringer SYSTEM 100 173 QUAD GATE/MULTIPLES. An authentic reproduction of the original System 100M circuitry from the 80s that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the 173 QUAD GATE/MULTIPLES in with your existing rig to expand its capabilities and you're sure to have a lot of fun.

The SYSTEM 100 173 QUAD GATE/MULTIPLES Module features 4 signal gates (switches) with buffered audio inputs and outputs for immediate signal switching. This provides users the option to choose between a control gate operation, non-inverting (active high) input or an inverting (active low) input.

6-channel multiples, each with 4 floating parallel connectors, are available for optimal signal integrity. You can now send out your signal to other modules to help you create more intricate patches and deliver more compelling sounds from one source.

Installing the SYSTEM 100 173 QUAD GATE/MULTIPLES is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the SYSTEM 100 173 QUAD GATE/MULTIPLES to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $91.25
FORTHCOMING
ADDAC System ADDAC200PI Pedal Integrator Module (red faceplate)
Cat: 776156
 
pedal integrator module
Notes: This small utility is the pedal's lover best friend, it allows 2 diferent chains of pedals to be independently connected to your synth.

The Send channels attenuate the synth level to instrument level.

The Return channels amplify the signal from instrument to synth level.

Specs:
. Width: 4 HP
. Depth: 3 cm
. Max current: 10mA
Read more
MRP:$100.38
coming soon $97.76
FORTHCOMING
Behringer 923 Filters Module
Behringer 923 Filters Module (eurorack module)
Cat: 772935
 
filters module
Notes: Enter the Behringer 923 FILTERS. An authentic reproduction of the circuitry from the Modular 35 and 15 series filters used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 923 features separate Low and High Pass filters each with their own dedicated frequency cutoff controls. The Low Pass filter control will roll off all frequencies above the set threshold frequency from 10Hz to 10KHz while the High Pass filter control will roll off frequencies below the set frequency. Each filter comes with their own 3.5 mm ins and outs giving you the ability to route incoming signals through the IN jack, through the filter and back out the OUT jack.

For you to shape an endless number of tones, the 923 comes with a white and pink noise generator. Use the parallel jacks for each of the noise sources to send out a white or pink noise signal and start sweeping frequencies to build tension and excitement in your songs, or use them to create some percussive sounds for a real groovy drum beat.

Installing the 923 is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 923 to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $86.91
FORTHCOMING
Division 6 Business Card Sequencer V2
Cat: 777968
 
business card sequencer
Notes: The Division 6 packs a lot of sequencer into a tiny package! This 16-step circuit can work as a sequencer or as a handheld keyboard.

Specifications:
Power In: 7-15VDC, tip positive through a 3.5mm jack. Find a voltage source on your synth to power it if you can! A 9V battery or AC adapter will work too.

Power supply: 7-15VDC (reverse-polarity protected!)
Power connection: 3.5mm phone jack, center-positive
Current draw: 15ma
Dimensions: 3.5" x 2" (the same as a business card!)
Read more
MRP:$108.20 SAVE 19%
coming soon $87.98
FORTHCOMING
Behringer 961 Interface Module
Cat: 772932
 
interface module
Notes: Enter the Behringer 961 INTERFACE Module. An authentic reproduction of the circuitry from the Modular 55 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 961 features an audio to V-Trig Converter, allowing you to plug in any audio source and transform it into a voltage trigger to drive other modules in your rig. Dual S-Trig to V-Trig and a multichannel V-Trig to S-Trig converters on the 961 can be utilized to switch or control a particular function on other modules.

Controls on the 961 include a Sensitivity knob that adjusts the gain of the audio signal coming into the module via the Audio In jack. Column B in each V-Trig In bank has a Switch-On Time knob you can use to manually control how short or long the "ON" duration is for S-Trig signals. This feature is normally used to drive the 911 envelope generator. Add a 960 sequential controller to release the full creative potential of this interface module.

Installing the 961 INTERFACE is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 961 INTERFACE to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $86.91
FORTHCOMING
Tangible Waves AE Modular SOLINA String Machine Emulation Module
Cat: 786501 Rel: 31 Oct 20
 
String machine emulation module
Notes: SOLINA, an emulation of the 70ies string machines!

The SOLINA module is based on th excellen work of Jan Ostman, who has developed a very good digital based emuation of the sound of the string synths that were popular in the music of the 70ies and 80ies, like ARP Solina (who gave this module it's name), Logan String and others.

Their unique sound is based on several, minor detuned sawtooth oscillators and an ensemble effect.

This module produces chords, which can be shaped in different ways, like selecting the base scale (minor, major), adding the 7th or a bass note and different variations of the chord. The sound can be shaped with a variable oscilator spread/detune, adding a phaser/ensemble and a tone knob for choosing the overall character between bass focused to only higher parts of the sound.
Read more
MRP:$93.86 SAVE 17%
coming soon $78.20
FORTHCOMING
Behringer Podcastudio 2 USB Bundle with USB Audio Interface
Cat: 772939
 
podcasting bundle
Notes: The PODCASTUDIO 2 USB bundle has everything you need to make high-quality podcasts, produce your own music and home recordings - plus it works seamlessly with your PC or Mac* computer! All the software you'll need is provided- a XENYX 302USB mixer with built in USB/audio interface, XM8500 microphone, HPM1000 headphones and much more - you'll be up and running in mere moments, right out-of-the-box!

No matter what your audio mixing needs, the XENYX 302USB provides the performance and features that can take your talent to the next level. With its professional sound quality, 5 Inputs with the legendary XENYX mic preamp, built-in USB/audio interface, plus rugged reliability - the XENYX 302USB is ideal for both your live gigs and recording sessions.

The XM8500 dynamic microphone is a performing/home recording enthusiast's dream come true! This professional-quality microphone is designed to capture your sound with outstanding sensitivity and accuracy. With its cardioid pickup pattern for excellent sound source separation and feedback rejection, this ultra-wide frequency response mic is an excellent choice for any performing or recording scenario - and it's rugged enough to go the distance! With its integrated shock mount system, mic stand adapter, spherical wind and pop filter, all in an impact-resistant carrying case - the XM8500 just may be the only microphone you'll ever need.

HPM1000 headphones provide everything you need for comfortable listening. The oval-shaped ear cups contain high-resolution capsules that deliver every nuance of your sound. Featuring a single-sided cord that resists tangling; an ultra-comfortable headband; and a 1/4" adapter for the 1/8" connector, HPM1000 phones are compatible with everything from your smartphone - to your mixing console.

Because you'll want to take full advantage of your XENYX 302USB's recording and podcasting potential, all the software you'll need for audio recording, editing and even podcasting is included - all free of charge and downloadable from behringer.com. You'll be ready to go live on your PC or Mac right out of the box. A free download of more than 150 virtual instruments and FX plug-ins is provided - turning your computer into a powerful home-based or mobile recording studio from input to output.

This amazing PODCASTUDIO 2 USB setup includes a: professional 5-input XENYX 302USB mixer with the studio-grade XENYX Mic Preamp; pair of high-quality HPM1000 headphones; great-sounding XM8500 dynamic mic - and all the cables and recording/podcasting software you'll ever need.
Read more
coming soon $98.85
FORTHCOMING
Tangible Waves AE Modular QUANTIZER Automatic Musical Scales Module
Cat: 786489 Rel: 31 Oct 20
 
Quantizer module
Notes: The QUANTIZER takes four different CV inputs and processes them in a way that the CV values "snap" to the exact values so that oscillators controlled by the outputs of the module play the notes of a selected musical scale. With an encoder one of 16 scales can be selected and is displayed in a text display,

There are 4 independent channels that are quantized to the same selected scale.

As an additional feature, the module provides a trigger signal for each channel on every change on the output CV.

Finally, with a switch the scale selection can be "frozen" so there is no accidental change possible.

There are 4 independent channels that are quantized to the same selected scale.

Module power consumption: 15 mA

Inputs
CV 1 - accept CV for channel 1 of the quantizer
CV 2 - accept CV for channel 2 of the quantizer
CV 3 - accept CV for channel 3 of the quantizer
CV 4 - accept CV for channel 4 of the quantizer
Outputs
CV 1 - Quantized CV from channel 1 of the quantizer
CV 2 - Quantized CV from channel 2 of the quantizer
CV 3 - Quantized CV from channel 3 of the quantizer
CV 4 - Quantized CV from channel 4 of the quantizer
TRIG 1 - Gate signal on change of CV from channel 1 of the quantizer
TRIG 2 - Gate signal on change of CV from channel 2 of the quantizer
TRIG 3 - Gate signal on change of CV from channel 3 of the quantizer
TRIG 4 - Gate signal on change of CV from channel 4 of the quantizer
MULT - unbuffered multiple, unconnected from the module's circuitry
B. CV - CV signal from MIDI
Please note:

The notation of the outputs is slightly different on the panel than indicated here. There are two rows of identical outputs, side by side. For each output-trigger there is an activity LED, indicating a change in quantized CV.

Controls
SCALE Knob - selects the current scale. 16 scales are available, the selected scale will be displayed in the small display to the right of this knob
LOCK Switch - prevents accidental changes of the selected scale when activated
OFFSET Knob - Select from up to 12 notes from the well-tempered scale as base-value, depending on the scale selected. All left would be equivalent to a key of C
Please note:

Scale selection directly takes place when the SCALE Knob is turned, clicking it has no specific effect.

Available SCALES, as indicated on the display, are as follows:

Minor (e.g. equivalent to A-B-C-D-E-F-G in ‘A minor’)
Major (e.g. equivalent to C-D-E-F-G-A-B in ‘C major’)
Dorian (e.g. equivalent to C-D-Eb-F-G-A-Bb in ‘C Dorian mode’)
Phrygian (e.g. equivalent to C-Db-Eb-F-G-Ab-Bb in ‘C Phrygian mode’)
Lydian (e.g. equivalent to C-D-E-F#-G-A-B in ‘C Lydian mode’ )
Mixolyd [Mixolydian] (e.g. equivalent to C-D-E-F-G-A-Bb in ‘C Mixolydian mode’ )
Locrian (e.g. equivalent to C-Db-Eb-F-Gb-Ab-Bb in ‘C Locrian mode’)
Gypsy (e.g. equivalent to C-D-Eb-F#-G-Ab-B in ‘C Hungarian minor scale’ )
Whole (equivalent to C-D-E-F#-G#-A# or B-Db-Eb-F-G-A as ‘Whole tone scales’)
Pent Min [Pentatonic Minor] (e.g. equivalent to C-Eb-F-G-Bb in ‘C Minor pentatonic’)
Pent Maj [Pentatonic Major] (e.g. equivalent to C-D-E-G-A in ‘C Major pentatonic’)
1-3-5 (e.g. equivalent to C-E-G in ‘C’)
1-3-4 (e.g. equivalent to C-E-F in ‘C’)
Fifth (e.g. equivalent to C-G in ‘C’)
Octave (e.g. equivalent to C in ‘C’)
Chromat (The 12 welltempered notes of the chromatic scale)
Read more
MRP:$76.91 SAVE 17%
coming soon $64.09
FORTHCOMING
Behringer 995 Attenuators Module
Cat: 772930
 
attenuators module
Notes: Enter the Behringer 995 ATTENUATORS. An authentic reproduction of the circuitry from the Modular 55 and 15 series attenuators used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 995 features three separate attenuators each with their own independent inputs and outputs. The attenuators can be used to adjust the level of the input signal passively from - 8 to unity gain and accept both audio and CV signals. Connecting a single signal to the first input will allow it to pass to all 3 outputs for up to 3 variable outputs of a single signal source. Introducing a signal into the subsequent outputs will break the chain from the previous input. For example, if you have a signal in input 2, then this will feed into input 3 leaving input 1 to feed out of output 1.

Installing the 995 is simple as it was designed to fit into a standard Eurorack case. This allows for the 995 to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $59.74
FORTHCOMING
Division 6 Business Card Synthesizer (fully assembled)
Cat: 777973
 
business card synthesiser
Notes: The Business Card Synthesizer is a tiny synth that can be connected to a Business Card Sequencer, other synth gear, or played by itself.

Headphones can be connected directly to the output of the synth, and there are plenty of knobs to play with, so you can easily make noises anywhere. Great for learning about synthesizers!

S&H Button: Enables Sample & Hold, which disables the external CV IN jack and uses LFO1 and LFO2 to determine oscillator pitch. LFO1 sets the sample rate (SHAPE is ignored for this), and LFO2 is the wave that gets sampled.

GATE Button: Manually turns on the gate so sound comes out of the synth. This control is momentary, but you can latch it on by tapping the S&H button while holding the GATE button down.

COARSE TUNE: Adjusts the pitch of the oscillator up or down in large increments

FINE TUNE: Adjusts the pitch of the oscillator up or down in fine increments

SHAPE: Changes the shape of the wave produced by the main oscillator (VCO). Turning this control fully CW gives you a triangle wave. Start turning it CCW takes you through sawtooth/ramp, then at about the 12:00 position you get a square wave. Continue turning it CCW and you get several higher duty cycle square waves
.
GLIDE: Adjusts the rate at which the pitch of the VCO takes to go between pitches (whether changed by the COARSE TUNE knob or CV IN). Fully CCW causes the pitch to react almost instantly, while fully CW makes it take its sweet time.

LFO 1 / LFO 2 SHAPE: Changes the shape of the waves produced by the low-frequency oscillators (LFOs). The shapes are similar to those of the VCO, except that the LFOs have sawtooth/ramp waves that go both up and down (since you can actually hear the difference at LFO rates).

LFO 1 / LFO 2 RATE: Controls how fast the LFOs go.

LFO -> VCO: Routes the two LFOs to control the pitch of the main oscillator. The 12:00 position is basically "off", and the LFOs have no effect on pitch. Start turning the control CCW and LFO1 starts changing the pitch of the VCO. Maximum effect is at about 10:00. Continuing to turn the control starts to bring in LFO2 as well. All the way CCW gives you full effect from both LFO1 and LFO2.

Turning the control CW from 12:00 does essentially the same thing, but brings in LFO2 first, then LFO1.

This might seem like kind of a weird control, but it gives you quite a bit of routing flexibility with one knob. You can have no pitch modulation, LFO1, LFO2, LFO1 with a little LFO2, or LFO2 with a little LFO1.

LFO -> VCA: Routes the two LFOs to control the amplitude of the oscillator. (See LFO -> VCO control description above for more information about how the control works.)

ATTACK: Controls how fast the audio amplitude fades in when the gate is triggered. CCW is fast and CW is slow.

DECAY: Controls how fast the audio amplitude fades out when the gate is released. CCW is fast and CW is slow.

VOLUME: Controls the overall volume of the signal coming from AUDIO OUT.

FILTER: Changes the cutoff frequency of an analog low-pass filter. Turn the knob fully CW and all frequencies (that you can hear) are let through. Start turning it CCW and the high frequencies start getting cut off, until the sound becomes muddy / muffled. Use in conjunction with the SHAPE control to get the tonal quality you are looking for.

Connections:
CV IN: Accepts a 1 volt/octave control voltage to control the pitch of the oscillator. It responds from about 0-5V, but voltages outside of this range won't cause damage. The CV input is quantized, so only valid (western scale) notes are played. This input is ignored when Sample & Hold is enabled.
GATE IN: A voltage greater than about 2.5V will turn on the gate and allow audio to come out the output of the synth.
AUDIO OUT: Connect to an amplifier or another synth. The jack has both the tip and ring connected, so you can even use stereo headphones and hear sound from both ears.
Power: Connect 7.5-15VDC to this 3.5mm TS jack to power the synthesizer. The tip is positive (don't worry, there's a protection diode in case you get it reversed). You can get power from a 9V battery, AC adapter, or you may even be able to find an output on your modular synthesizer that can provide enough current.

Specifications:
Power supply: 7-15VDC (reverse-polarity protected!)
Power connection: 3.5mm phone jack, center-positive
Current draw: 15ma
Dimensions: 3.5" x 2" (the same as a business card!)
Read more
MRP:$108.20 SAVE 19%
coming soon $87.98
FORTHCOMING
Teenage Engineering OP-1 Accessory Kit
Teenage Engineering OP-1 Accessory Kit (synthesiser & sequencer accessory kit)
Cat: 784900 Rel: 16 Oct 20
 
Accessory kit for OP-1
Notes: The OP-1 world is continuously evolving with new accessories and new OS updates adding more effects and functions with every release. With OP-1's modular architecture, all this new functionality comes without adding any complexity to the user interface or resulting in over-clustered screens. Your OP-1 will always be intuitive and simple to use.

Accessories included in the OP-1 Accessory Kit:

Antenna:
3.5 mm plug-in radio antenna for better signal reception when indoor or in remote areas.

Crank:
Mount the crank accessory on OP-1's blue knob and press shift + rec. Your OP-1 is now in "hand-crank-recording mode". Use the crank to create some real vintage old skool recordings. It's also possible to crank counter clockwise, to record backwards. All in realtime. The crank also lets you use the endless sequencer as a hand cranked music box! Just enter the notes and crank the crank! The crank LFO lets you crank any parameter.

Bender:
Bender mounts on the orange knob and comes with a rubberband that is attached around the blue knob for elasticity. By selecting the bender in the LFO browser, you may bend any parameter you like. Everything from pitch to filter or synthesizer parameters.

Brick Shaft:
Brick shafts are LEGOr compatible shafts that you put on any of the knobs. Now you may mount any lego part. Why not put on a big lego rubber wheel for that extra grip? Or build your own motor driven programmable LFO together with LEGOr MINDSTORMS? The brick shaft comes in four colors and lets you experiment with any parameter. It supports any idea you may have that involves LEGOr bricks.
Read more
MRP:$63.88 SAVE 17%
coming soon $53.23
FORTHCOMING
EMW MIDI Thru 4 Module (black faceplate)
Notes: The EMW MIDI Thru-4 was designed to help users with multiple MIDI modules. It lets you take 4 copies of a MIDI signal that can used with any of our EMW MIDI-enabled oscillators.

Eurorack (3U) form factor - 8 HP width
Power consumption: +12V [10mA] / -12V [0mA]
Weight: 69g
Depth: 50mm
Read more
MRP:$104.29 SAVE 20%
coming soon $83.65
FORTHCOMING
ADDAC System ADDAC301 Floor Control Module (red faceplate)
Cat: 776281
 
floor control module
Notes: While ADDAC were working on the new VC Stompboxes several expression pedals were tested and it became clear that most often, while playing a modular system, your hands are busy.
It's also normal to have an expression pedal lying around somewhere, so ADDAC have brought these back, cleaned up the dust and put them to good use.
This module allows the connection of any standard expression and sustain pedal.

The expression pedal action can be fine-tuned with Range and Offset knobs.
Range defines the voltage range (-10v, +10v).
Offset transposes the range by (-5v, +5v).
Two leds, plus and minus, monitor the CV Output
Positive and inverted output jacks.
The sustain pedal action will generate a gate signal on the gate output.
One led monitors this output.
The module also features a bus board +5v Adaptor, this will be able to provide +5v to any bus board.
This feature can be removed through a jumper on the back of the module.

Specs:
. Width: 4 HP
. Depth: 4 cm
. Max current: 20mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$78.22
coming soon $76.04
FORTHCOMING
Magma CTRL Case MPC One For Akai MPC One Sampler & Sequencer
Cat: 779623
 
Custome case for Akai MPC One Sampler & Sequencer
Notes: The CTRL Case MPC ONE is custom designed to a hold the new AKAI MPC ONE and is a very lightweight and convenient solution to carry your sampling workstation well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize audio cables and accessories.

FITS:
Akai MPC One

SPECS
Outer measures: 32 x 32 x 13,5 cm
Inner measures: 28 x 28 x 10 cm
Weight: 0,8 kg
Read more
MRP:$65.18 SAVE 17%
coming soon $54.31
FORTHCOMING
Citronic CM25 Studio Condenser Microphone
Citronic CM25 Studio Condenser Microphone (studio condenser microphone)
Cat: 778591 Rel: 31 Aug 20
 
large diaphragm condenser microphone
Notes: Large diaphragm condenser microphone with cardioid polar response pattern for accurate reproduction of vocals and instruments in a recording or broadcast studio. All metal construction with a bespoke shock-mount and magnetic pop-shield included, ready to mount to a standard microphone stand or boom arm. Connection via XLR for high quality balanced audio output and phantom power from a mixing console or dedicated phantom power supply. Supplied with a 3m balanced XLR lead in a fitted aluminium transit case.

The box for this item contains :

CM25 condenser microphone
Fitted shock-mount cradle
Magnetic pop shield
3m balanced XLR lead
Aluminium transit case

Power supply: 30 - 48V phantom power (via XLR)
Construction: Zinc alloy body and steel grille
Capsule: 25mm: O nickel sputtered diaphragm
Output impedance: 2.2k Ohm
S/N ratio: 68dB (A-weighted)
SPL max.120dB (1kHz)
Lead length: 3m
Read more
MRP:$89.95 SAVE 31%
coming soon $61.91
FORTHCOMING
Nux Mighty Air Headphone Amplifier With Bluetooth
Nux Mighty Air Headphone Amplifier With Bluetooth (headphones amplifier with Bluetooth)
NUX
Cat: 778743 Rel: 31 Aug 20
 
Bluetooth headphone amplifier
Notes: Mighty Plug is a complete guitar or bass practice room that can fit in your pocket. Simply plug into your guitar or bass and connect headphones and you can play fully amplified guitar sounds along to your favourite tracks in complete silence. Inside this tiny device is a huge arsenal of amp models for guitar or bass, effects and acoustic models. Bluetooth connectivity lets you pair with a smart phone or tablet (search for "Mighty Plug") for playback of audio to jam to or for in-depth editing of the Mighty Plug amp and effect settings using the Mighty Amp app (downloadable from App Store or Google Play). No need to keep replacing batteries, as the Mighty Plug is rechargeable via the USB, which also serves as a computer interface for firmware updates and as a recording/playback interface. The Mighty Plug contains all you need for hours of practice, recording and sound exploration.

Specification
Battery: Internal rechargeable LiPo 3.7V, 1000mAh
Input impedance: 1M Ohm
Rated power: 2 x 125mW
Wireless connection: Bluetooth editing or audio playback
USB computer interface: Micro USB audio stream & recharging
Effects: 13 amp models, 20 IR presets, 19 effect models

The box for this item contains :

Mighty Plug headphone amplifier
USB to micro lead
Read more
MRP:$76.91 SAVE 31%
coming soon $53.23
FORTHCOMING
EMW Multi Low Frequency Oscillator Noise Module (black faceplate)
Notes: The EMW MULTI LFO-NOISE is another very interesting module: it has a selection of 8 waveforms, including noise, in order to maximize the modulation capabilities of your modular synthesizer setup. When used in conjunction with another LFO (via a DC mixer), the resulting waves can be very varied and random.

Read more
MRP:$89.95 SAVE 19%
coming soon $72.78
FORTHCOMING
Sensel Buchla Thunder Overlay For Morph MIDI Controller
Cat: 785456 Rel: 22 Oct 20
 
Overlay
Notes: The legendary expressive controller, the Buchla Thunder, now comes to the Sensel Morph in an exclusive new partnership with Buchla U.S.A.

The Buchla Thunder Overlay exclusively features a new preset system to the Morph. By holding the preset button and tapping on one of the nine numerical keys, you can easily and instantly switch between nine mappings without needing to open the SenselApp. Need to go from an instrument controller to a virtual mixer? Want to swap between scales? Presets add a seamless extension of expressive control possibility to the Buchla Thunder Overlay.

The Buchla Thunder is uniquely well-suited to a variety of instruments - from synthesizers with rich and evolving timbres, to acoustic samples that benefit from a more human touch, to hardware synthesizers like the legendary Buchla Easel. You can witness the richness of expression in the videos above.

The MIDI protocol is USB Class-compliant and supports MIDI Polyphonic Expression (MPE) and Bluetooth MIDI.

Read more
MRP:$83.43 SAVE 24%
coming soon $63.00
FORTHCOMING
Erica Synths Sequential Switch V1 Module
Cat: 780453
 
Switch module
Notes: Erica Synths 8 channel Sequential Switch is the first assembled module for Erica synths, and it allows you to sequence up to eight sound sources in advanced ways or route one sound source sequentially to eight different sound modifiers- VCFs, waweshapers, VCAs, etc.

It has unique control interface that allows you to pause, skip and merge steps, set sequence length, but what really sets it apart from other sequential switches is Gate output- when used with ADSR and VCA, you get really powerful sequencer with real time control over each sound source in the sequence. Use sequential Switch with random clock source and you get a heart of insane random, self-generating patches!

Technical characteristics:

Panel width: 14HP
Module depth: 20mm
Max power consumption (all LEDs on): 52mA@+12V, 13mA@-12V
Read more
MRP:$146.00 SAVE 54%
coming soon $67.34
FORTHCOMING
Tangible Waves AE Modular SEQ8 Analogue 8-Step CV Sequencer Module
Cat: 786498 Rel: 31 Oct 20
 
8-step CV sequencer module
Notes: An analog 8-step CV sequencer.

The SEQ8 is an 8-step sequencer for controlling oscillator pitch and triggering envelopes.

Compared to "classic" analog sequencers it works a bit different: Instead of setting the CV for each step independently (which means in fact "tuning" each step which can be a bit tedious), the SEQ8 has 4 knobs for presetting different CV's (= notes); each of the 8 step knobs selects one of these CVs, plus 0V (=base note) plus Pause (no trigger output). So some CVs have to be fine-tuned once; with the step knobs you can focus entirely on the sequence itself and you can even modify it on the fly, still remaining in tune.

Additionally to the selected CV presets, the "raw" value of the step knobs is also accessible at an extra output.

Module power consumption: 7 mA
Read more
MRP:$62.57 SAVE 17%
coming soon $52.13
FORTHCOMING
TC Electronic TC8210-DT Reverb Plug-in with Dedicated Hardware Controller
Cat: 781357
 
Reverb plug-in
Notes: Classic Mixing Reverb Plug-in with Dedicated Hardware Controller

Sound:
Sample rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz

Software Support:
Operating systems: Mac OS X 10.13 Sierra or above, Windows 7 or above
Drivers: No additional drivers required, uses standard USB HID drivers
Plugin formats: AAX-native, Audio Units, VST2.4, VST3. 64 bit

USB Connection (DT version)
Type: USB 2.0, type micro-B

Power (DT version)
Power supply: USB bus powered
Power consumption: Max. 2.5 W

Physical (DT version)
Dimensions (HxWxD): 42 x 54 x 135 mm (1.7 x 2.1 x 5.3")
Weight: 0.22 kg (0.48 lbs)
Read more
coming soon $99.93
FORTHCOMING
Eurorack Hardware Modules AMIX Active Audio & CV Mixer Module (black faceplate) (fully assembled)
Notes: The AMIX module from Eurorack Hardware has three channel (active) powered mixer in 2HP for Eurorack. Great for both Audio and CV sources. Matte black panel with white graphics. Max gain of 1.
Current Draw: +12=15mA, -12=10mA, +5=0
Read more
MRP:$87.34 SAVE 19%
coming soon $70.60
FORTHCOMING
SynthRotek Arcadian Rhythms Module (black faceplate, blue buttons) (fully assembled)
Notes: Arcadian Rhythms is an arcade button module that can be used to trigger drums, envelopes and other events in a Eurorack system. When the buttons are pressed, they light up and send a gate. As long as a button is held down, the gate remains high.

Mix and match your LED buttons! The brightness between colors will vary slightly, but the trimmers on the back of the module will adjust the LED brightness so the three buttons match. Reducing the brightness will also reduce the current draw (each button draws 41mA at full brightness).

Choose red, blue, green, yellow or white buttons.

Specifications:
Module width: 35mm
Module depth: 6HP
Current draw: +12V: 123mA max (41mA per button)
Read more
MRP:$69.09 SAVE 18%
coming soon $56.49
FORTHCOMING
EMW 200 Filter Module (black faceplate)
Cat: 774648
 
filter module
Notes: The EMW-200 Filter module is the same found on the EMW-200 synthesizer and its circuit is very similar to the one used on the old EML-200.These filters have a 6 db/oct attenuation curve and they sound amazing. No other filter can create a 'dark' sound atmosphere like these ones. It is a great addition to any modular synthesizer setup, specially for those designed to work with sound design and electronic music.

Read more
MRP:$95.16 SAVE 19%
coming soon $77.13
FORTHCOMING
EMW Boozy Voltage Controlled Filter Module (black faceplate)
Cat: 774642
 
voltage controlled filter module
Notes: The EMW Boozy VCF is a specially designed 6dB/oct voltage controlled filter with an unique and interesting sound. It was not designed to replace any standard VCF module but it's ideal to create more sound variations in a modular system. When the cut off frequency is adjusted to it's minimum the sound is not completely muted. This feature summed to its special resonance actuation curve adds one more option to your timbres.
Read more
MRP:$117.32 SAVE 19%
coming soon $94.51
FORTHCOMING
ADDAC System ADDAC217 Quad Gate to Trigger Module (black faceplate)
Cat: 776261
 
gate to trigger module
Notes: Following ADDAC System's T-Networks series, the importance of having the right input signal for firing drum modules or envelopes was realised. Gates and Triggers are often looked at as similar signals but at times it really makes a difference and results will change drastically depending if a Gate or a Trigger is fed to the input of such modules.

This led to the simple yet effective Gate to Trigger.
A four channel converter with bypass switch for each channel.

Any input Gate will be limited to a 1ms Trigger.

Tech Specs:
3HP
2.5 cm deep
10mA +12V
10mA -12V
Read more
MRP:$78.22
coming soon $76.04
FORTHCOMING
ADDAC System ADDAC213B Eurorack Bridge Module (black faceplate)
Notes: The ADDAC213B is the second pair of modules from ADDAC's Eurorack Bridge system.

A pair of ADDAC213Bs can be used in standalone to send/receive 8 CV or audio signals between different points inside the same case or as an expansion to the main pair of Eurorack Bridge modules, the ADDAC213As.

Two ADDAC213B modules can be connected to each other with the use of a single ribbon cable and then used inside a case to carry signals between distant points without the need for long cables. Less clatter, less spaghetti- more space of your fingers on those knobs!

ADDAC213Bs always come in pairs. A single pair can send & receive up to 8 CV or audio signals between different points in your case at the same time. The modules can be installed in normal position or a 180 degree position to fit any need.

As an Expansion to an ADDAC213A.

Each ADDAC213B connected to the backside of an ADDAC213A adds 8 more channels to the main bridging functionality of the ADDAC213A.

Up to 2 ADDAC213B can be connected to an ADDAC213A module, expanding the bridging between two difference cases to a total of 24 channels.

If you're looking for a simple one-cable bridge between your various cases, then look no further than the ADDAC213A.

Between the ADDAC213A pair and the ADDAC213B, your cases never looked so elegantly connected together!

Each module can be installed in normal position or at 180 degrees.

Mechanical:
. Format: Eurorack
. Width: 3 HP
. Depth: 2.5 cm

Electrical:
Passive / Does not draw current
Ribbon Cable: 50cm or 100cm ribbon cable
Read more
MRP:$89.95
coming soon $86.90
FORTHCOMING
EMW Echo Effects Module (black faceplate)
Notes: This is a digital Echo module designed to have a very vintage and analog style sound. It adds a very dist inct ive and interest ing sound characteristic to any setup.
Read more
MRP:$116.02 SAVE 22%
coming soon $90.17
FORTHCOMING
EMW Phase 45 Analogue Phaser Module (black faceplate)
Notes: The EMW Phase 45 is a simple yet powerful analog 1-stage (45 ) phaser module. It features manual controls for Feedback and Phase as well as a CV input for Phase modulation (Mod In).

Eurorack (3U) form factor - 8 HP width
Power consumption: +12V [10mA] / -12V [10mA]
Weight: 86g
Depth: 50mm
Read more
MRP:$102.98 SAVE 21%
coming soon $81.48
FORTHCOMING
EMW Logic 101 Logic Functions Module (black faceplate)
Notes: The EMW Logic 101 module has 4 different logic functions that are useful when you need to control pulses in order to create alternative activation logic. The «&" or "AND" function output only goes high when both A and B inputs are on a high level. The "OR" function output goes high when either A or B inputs are on high level. The verters,as expected, inverts the signal in its outputs, going high when the input is low and vice-versa.

Eurorack (3U) form factor - 6 HP width
4 logic functions In only 6HP rack space
2 x AND function, 1 x OR and 2 x Inverter
External pulse input: 2.5 to 15 Volts.
Power consumption. +12V [34mA] / -12V [0mA]
Connectors: 3.5mm
Weight: 72g
Depth: 50m
Read more
MRP:$121.23 SAVE 20%
coming soon $96.69
FORTHCOMING
EMW Dual Glide Processor Module (black faceplate)
Cat: 775740
 
glide processor module
Notes: The EMW Dual Glide Processor module can create glide or portamento effects on control voltages. It's great for creating portamento effects on CV sequences or changing the decay characteristic of a control voltage or another low frequency waveform.
Read more
MRP:$76.91 SAVE 21%
coming soon $60.84
FORTHCOMING
EMW 8-Step Trigger Sequencer Module (black faceplate)
Notes: The EMW 8-Step Trigger Sequencer combines many different features into a wellsized 8hp module. This module let’s you program 8 different sequences that can be used to trigger drum modules, envelopes or function generators. The module includes clock, reset, and hold CV inputs as well as a "Beat-1" trigger output that sends out a trigger whenever the sequencer goes through Step #1.

Eurorack (3U) form factor - 8 HP width
Power consumption: +12V [38mA] / -12V [0mA]
Weight: 119g
Depth: 50mm
Read more
MRP:$123.84 SAVE 22%
coming soon $96.69
FORTHCOMING
EMW MIDI Mixer Module (black faceplate)
Notes: The EMW MIDI Thru-4 was designed to help users with multiple MIDI modules. It let’s you take 4 copies of a MIDI signal that can be used with any of our EMW MIDI-enabled oscillators.

Eurorack (3U) form factor - 8 HP width
Power consumption: +12V [34mA] / -12V [15mA]
Weight: 73g
Depth: 50mm
Read more
MRP:$108.20 SAVE 19%
coming soon $87.99
FORTHCOMING
ADDAC System ADDAC301B Dual Expression Pedal Attenuator Module (red faceplate)
Cat: 776289
 
dual epression pedal attentuator
Notes: Passive dual expression pedal attenuator.

Plug any CV or audio source through it and control its amplitude through any standard expression pedal.

Invert switch for inverting the expression pedal action.

Specs:
. Passive Module
. Width: 4 HP
. Depth: 3 cm
Read more
MRP:$73.00
coming soon $70.60
FORTHCOMING
Reloop sPodcaster Go Professional USB Podcast Microphone
Cat: 783826 Rel: 30 Sep 20
 
USB podcast microphone
Notes: Quality and flexibility are more important than ever for musicians and podcasters nowadays. The professional USB condenser microphone continues the successful sPodcaster series in an outstanding retro design and is built in a portable and slim aluminium housing.

Both the dubbing of musical instruments and the recording of speech and vocals, whether on the road or in project studios, are recorded in studio quality with high-quality A/D converters, thanks to the integrated audio interface (class compliant). Thanks to the advantageous cardioid polar pattern, the system is directed towards a sound source, so that ambient noise and feedback are largely cancelled out.

The 3.5 mm jack connector on the back panel allows you to connect headphones or speakers to listen instantly to the recording. All of the computer's audio output is thus played back via the sPodcaster Go's audio interface and can be comfortably adjusted using the volume buttons. A USB connection between PC or Mac is plug 'n' play without any additional driver installation and also supplies the microphone with power.

The tabletop stand, pre-mounted on the underside of the microphone, folds completely to transport the sPodcaster Go in a space-saving manner. Alternatively, the table stand can be unscrewed to allow attachment to a conventional stand with M10 threads. The sPodcaster Go's rugged construction makes it well-prepared for the daily challenges of mobile use.

The Reloop sPodcaster Go includes a matching USB cable and a functional carrying bag.

Professional USB condenser microphone for portable podcasting
Perfect for recording on the go and smaller studio environments
Integrated USB audio interface (class compliant)

Technical Data
Voltage: USB feed, 5.0 V
Sensibility: -65 i5 dB @ 1 kHz
S/N ratio: -59 dB
Frequency range: 50 Hz - 18 kHz
Plug&Play compatible with Windows Vista, XP, 8 and Mac OS X
Connection: USB
Dimensions: 148 x 65 x 56 mm
Weight: 350 g
Incl. USB cord, table stand and software
Read more
MRP:$71.70 SAVE 17%
coming soon $59.74
FORTHCOMING
Presonus Audiobox USB 96 25th Anniversary Edition 2x2 USB Audio Interface
Cat: 783858
 
USB audio interface
Notes: Whether you are a musician, producer, or podcaster on a tight budget, the AudioBox USBr 96 audio interface is for you! This simple, handy little audio/MIDI interface has just the right features for basic recording needs, allowing you to plug in and start recording up to 24-bit, 96 kHz audio right away. Bus-powered and built to travel, the AudioBox USB 96 makes recording easy.

The AudioBox USB 96 audio interface's two front-panel combo mic/instrument inputs make it ideal for singer/songwriters, podcasters, and guitar or guitar-bass collaborations. Simply connect a couple of mics and you have an easy-to-use stereo recording system. A mix control lets you control the level between the input signal and computer playback, without hearing annoying delays. You also get a pair of balanced line-level outputs, an ultra-loud, crystal-clear headphone out, plus MIDI I/O, so you can connect your favorite synth or MIDI controller. The result is a simple, affordable, mobile recording solution.

Here is a mobile audio interface in the best sense of the term. The AudioBox USB 96 was given a heavy-duty steel chassis so it can take a serious pounding and remain completely reliable. Its screaming-loud headphone output ensures you can hear your music loud and clear, even in noisy locations. And it's USB 2.0 bus-powered, so you can record with it anywhere you can use a laptop. Simply drop it in your laptop bag or slap it on a tabletop.

Whether you're just getting into recording or are a veteran producer who wants to go mobile, the AudioBox USB 96 audio interface will give you great sound in a bus-powered, rugged chassis that's ready to hit the road when you are. The perfect companion for any recording software, the AudioBox USB 96 comes equipped with Studio One Artist to provide you with a complete recording solution right out of the box. Check out the AudioBox USB 96 and Studio One at your favorite PreSonus dealer.

PreSonus interfaces come with everything you need to craft your own mesmerizing spells in the studio. That's why the Studio One Artist is included with every PreSonus audio interface product. But not only that, the Studio Magic Suite software with PreSonus' audio interface products.

Input/Output
1 USB 2.0 port
2 combo XLR/14" mic/instrument inputs
2 balanced 14" main (L/R) line outputs
1 stereo 14" headphone output

MIDI in/out
Digitalia
24-bit resolution and 44.1, 48, 88.2, and 96 kHz sampling rate
Professional-grade A/D/A converters (+105 dBu dynamic range)
Zero-latency monitoring via internal mixer
Compatible with most Macr and Windowsr recording software
Included Software
Studio Oner Artist
Studio Magic Plug-in Suite

Physical
1/3U rack-mountable (with optional 3UMR rack-mounting system)
Road-rugged construction with all-metal chassis and metal knobs
Weighs just 5 lbs (2.3 kg)
Powered via USB bus- no wall wart!
Read more
MRP:$114.72 SAVE 17%
coming soon $95.59
FORTHCOMING
EMW Gate Delay Module (black faceplate)
Notes: The EMW GATE DELAY module can induce a delay on a gate signal. The delay amount can be adjusted using the SET and RESET knobs on the front panel. A delayed gate signal or pulse is very useful to promote the trigger of envelopes and other modules in alternative moments in a patch, creating some very interesting and unexpected effects and modulations.

Eurorack (3U) form factor - 6 HP width
Power consumption: +12V [29mA] / -12V [0mA]
Weight: 64g
Depth: 50mm
Read more
MRP:$106.90 SAVE 20%
coming soon $85.82
FORTHCOMING
EMW 10V Level Converter Module (black faceplate)
Notes: 8-cannel voltage converter

Eurorack (3U) form factor
Read more
MRP:$97.77 SAVE 20%
coming soon $78.22
FORTHCOMING
SynthRotek DIRT Filter Module (black faceplate) (fully assembled)
Cat: 778171
 
low-pass filter module
Notes: DIRT is our new 4HP low-pass filter / effect for the Eurorack modular synth platform.

The DIRT is an unapologetic filter / effect that produces interesting and unique effects via the Bias knob, accessible from the front panel.

It's not a traditional filter; it's an effects module with filtering, ring mod effects, wave shaping and even outright brutal harmonic distortion.

DIRT likes to square things up a bit, so throw in a triangle, sawtooth, sine or other wave forms for different style effects. Even plugging a guitar (using an external amplification module) into the DIRT produces some great sounds and heavy distortion.

Controls:

- CUTOFF = Cutoff Frequency

- RESONANCE = Increase the Q!

- BIAS = Set the bias correctly or not, the choice is yours


Inputs/Outputs:

- Version 2.2, which as a buffered CV input jack. CUTOFF CV IN = Voltage range changes depending on where CUTOFF knob is positioned. External attenuation will be needed for fine modulation.

- AUDIO IN = Audio Input

- AUDIO OUT = Audio Output

Other info:

- PCB Dimensions: 4 x 1.5 inches

- 4HP

- Power consumption: >1mA
Read more
MRP:$80.82 SAVE 18%
coming soon $66.26
FORTHCOMING
ADDAC System ADDAC200B 2HP Buffered Multiples Module (red faceplate)
Cat: 776133
 
buffered multiples module
Notes: ADDAC System's smallest buffered multiples allow you to connect one source to its input and have it distributed through all of the 3 adjacent outputs. You get two sets of four connectors. and it can do both audio and CV!
Read more
MRP:$67.79
coming soon $65.17
FORTHCOMING
EMW Analog Noise 3X Module (black faceplate)
Cat: 774774
 
noise generator module
Notes: The EMW ANALOG NOISE 3X module is a classic noise generator that uses all analog circuitry to produce a dense and pure noise sound. It's transistor based thermal noise source works by amplifying the little thermal noise generated by the random movement of atoms on the semiconductor junction. This method guarantees a totally random noise source like the ones used by vintage machines.
Read more
MRP:$89.95 SAVE 23%
coming soon $69.52
FORTHCOMING
EMW Triple Low Frequency Oscillator Module (black faceplate)
Notes: The EMW LFO 3X TRI was designed to be used independently or in conjunction to generate complex modulations when its outputs are mixed together thru a DC Mixer. The three LFOs have slightly different frequency ranges in order to maximize its usage and fit perfectly in any modulation scheme that uses Low Frequency Oscillators.
Read more
MRP:$97.77 SAVE 24%
coming soon $73.88
FORTHCOMING
SynthRotek 1U Mattson Buffered Multiple Module (black faceplate)
Cat: 777875
 
buffered multiple module
Notes: The 1U Mattson Buffered Multiple is a PRECISION buffered mult that is perfect for 1V/O CV sources. A signal plugged into INPUT A will be available from all 8 OUTPUTS. Break the chain by adding a second signal into INPUT B; signal A comes out the 4 "A" outputs and signal B is available at the 4 "B" outputs.

Please note: Synthrotek's 1U products do not fit in Vermona or Intellijel cases.

Current draw: +12 18mA, -12 18mA
Width: 20HP
Depth: 32mm


Read more
MRP:$100.38 SAVE 19%
coming soon $81.46
FORTHCOMING
Old Blood Noise Expression Slider Portable Expression Fader
Cat: 782128 Rel: 24 Sep 20
 
Expression slider pedal
Notes: The Old Blood Noise Endeavors Expression Slider is a fader for use with any pedal that has an Old Blood style expression input (see details below). Simply use a TRS cable to plug the Expression Slider into the Expression input and use the slider as you would a knob or expression pedal. Suggested uses: strap it to your mic stand to adjust your favorite setting without bending down, keep it at your studio console to control a parameter while tracking, use the indicators to mark your favorite settings, or simply replace a knob control with a slider because let's face it: sliders are cool. Unsuggested uses: Unintended excess weight from use with foot while standing may cause damage to the device. Read: Don't use your foot.

Details: the Expression Slider uses a TRS jack with tip connected to the wiper of a 100K slider. Old Blood Noise confirmed that it works with all their other products, as well as pedals from Chase Bliss, Meris, Earthquaker Devices, Empress, Montreal Assembly, Strymon, EHX, and Boss. It will not work with TS style expression inputs such as Line6 without an additional TRS splitter cable.
Read more
MRP:$63.88 SAVE 17%
coming soon $53.23
FORTHCOMING
ADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplate)
Notes: Inspired and officially licensed from Teia's Stochastic Function Generator which was introduced in 2013 but is no longer available. This earlier version served as an inspiration, but with a completely rebuilt and reprogrammed mcu to a fully featured 4 voice 2 stage envelope and slew generator.

ADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplateADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplate
This expansion allows extra I/O to the ADDAC506, namelly:

Four trigger inputs for the random engine.

Four CV random outputs from the random engine.
Read more
MRP:$100.38
coming soon $97.76
FORTHCOMING
SynthRotek 1U UniBuffer Module (black faceplate)
Cat: 777891
 
buffer/gain mixer module
Notes: The 1U UniBuffer combines a buff mult and a unity gain mixer into a 1U module. It's great for small cases where you want both functions available (like the Power Lunch).

The Buffered Multiple is a PRECISION buffered mult that is perfect for for 1V/O CV sources. The 1U Unity Gain Mixer adds input signals together and combines them for a summed output.

Current draw:
+12V: 14mA
-12V: 13mA
Module Depth: 20mm
Width: 20HP
Polarity protected
Read more
MRP:$100.38 SAVE 19%
coming soon $81.46
FORTHCOMING
SynthRotek 1U Stereo Output Mixer Module (black faceplate)
Cat: 777888
 
stereo output mixer module
Notes: The 1U Stereo Mixer is intended for pannable stereo output, but it is also suitable for both DC (Gates, Triggers and Control Voltage) & AC (audio) signals.

Specifications:
Current draw: +12: 13mA, -12: 9.2mA
Depth: 32mm
Width: 24HP
Please note: Synthrotek's 1U products do not fit in Vermona or Intellijel cases.
Read more
MRP:$93.86 SAVE 19%
coming soon $76.04
Artículos del 1 al 50 de 131 en la página 1 de 3
1  2  3  »

Filter

Coming Soon: Studio Equipment
Close