100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

Inicio  Coming Soon  

Studio Equipment

Format: All Vinyl CD DJ Equipment Studio Equipment
Options
Artículos del 1 al 25 de 25 en la página 1 de 1
FORTHCOMING
Behringer Multimode Filter/Resonator Module 1047
Cat: 799853 Rel: 11 Jan 21
 
Filter/resonator synth module
Notes: Legendary 2500 Series 12dB state variable filter module for Eurorack.

This is the Behringer 2500 series MULTIMODE FILTER/RESONATOR MODULE 1047. An authentic reproduction of the original "System 2500" circuitry from the 70's that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the MULTIMODE FILTER/RESONATOR MODULE 1047 in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

The MULTIMODE FILTER/RESONATOR MODULE 1047 is a classic voltage controlled 12 dB per octave state variable filter, the filter is a matched transistor design for a vintage sound. The 1047 filter is equipped with a coarse and fine filter frequency controls, a resonance (Q) control which acts on all 4 filter outputs, a resonance limit switch prevents signal overload when high levels of resonance are used, the notch frequency/fc control allows the notch frequency to be adjusted up or down from fc as set by the frequency controls, 2 summed frequency CV attenuators and a resonance (Q) CV attenuator for maximum flexibility, the signal input is also equipped with an attenuator. All this gives you endless possibilities of filter curve shape to create the ultimate sound.

The 1047 gives you comprehensive connectivity, filter signal input, FCV 1 and FCV 2 inputs can be used for filter frequency control or modulation, the Q CV input allows modulation of Q and resonance. The independent low-pass, high-pass, band-pass and notch filter outputs are all available simultaneously to feed multiple filter signals to other modules.

Installing the MULTIMODE FILTER/RESONATOR MODULE 1047 is easy as it is designed to fit into a standard Eurorack case. Just connect the power cable to the power supply and screw in the module using the included screws. This allows for the 1047 to be mixed with other synth modules for a truly unique set up.



Read more
coming soon $94.81
FORTHCOMING
Behringer 110 VCO/VCF/VCA Module
Cat: 799848 Rel: 11 Jan 21
 
VCO/VCF/VCA Module
Notes: Legendary Analog VCO/VCF/VCA Module for Eurorack

The 80s was the golden age of electronic music. Synthesizers were at their prime and almost every hit song and movie soundtrack at that time had a synth in one form or another. Modular synths have become more and more popular with professionals and enthusiasts over the years and they're about to get even better.

This is the Behringer System 100 110 VCO/VCF/VCA Module. An authentic reproduction of the original "System 100M" circuitry from the 80s that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the 110 in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun!

The 110 comes with a complete synth voice with an internally patched signal flow for ease of use and to save patching time so you can focus on your music. You can vary the VCO section by selecting one of three waveforms; triangle, ramp and Pulse Width Modulation which can be adjusted by the Mod Manual knob. The VCO also offers pitch and range control knobs as well as one audio output, which can be routed to another source, and two CV inputs.

The VCF features cutoff frequency and resonance sliders while the VCA comes with two audio outputs (low/high). Both the VCF and VCA each feature two audio inputs and two CV inputs that allow for other sources to be plugged into the 110, making it a must-have in any modular synth.

Installing the 110 VCO/VCF/VCA is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 110 VCO/VCF/VCA to be mixed with other synth modules for a truly unique set up.

Whether you're just getting into modular synths or looking to complete your collection, the 110 VCO/VCF/VCA module from Behringer is a great tool to have when creating amazing music.

Specification:

Inputs
Pulse width mod
Type
3.5 mm TS jack, DC coupled

Impedance
>70 kO, unbalanced

Maximum input level
0 V to +10 V, 4% per volt

Signal input
Type
Impedance
>50 kO, unbalanced

Max input level
+17 dBu @ unity gain

VCO mod input
Type
2 x 3.5 mm TS jacks, summed

Impedance
>50 kO, unbalanced

CV range
0 V to +10 V, 1 V/oct

VCF mod input
Type
2 x 3.5 mm TS jacks, summed

Impedance
>50 kO, unbalanced

CV range
0 V to +10 V, 1 V/oct

VCA mod input
Type
2 x 3.5 mm TS jacks, summed

Impedance
>50 kO, unbalanced

CV range
0 V to +10 V, typically 1 V per 10 dB

Outputs
VCO output
Type
3.5 mm TS jack, DC coupled

Impedance
1 kO, unbalanced

Max output level
10 V p-p

Frequency range with no external CV
<10 Hz to 500 Hz

Frequency range using external CV
<1 Hz to 30 kHz

VCA output
Type
2 x 3.5 mm TS jacks, AC coupled

High impedance
1 kO, unbalanced

Low impedance
3 kO, unbalanced

High max output leve
+18 dBu

Low max output level
-2 dBu

High output noise
<-60 dBu, 22 Hz -22 kHz

Low output noise
<-80 dBu, 22 Hz -22 kHz

Controls
Pulse width manua
50% to min

Waveform
Triangle, sawtooth, pulse

Range
32', 16', 8', 4', 2'

Pitch
2 octave range

Cutoff frequency
20 Hz to 20 kHz

Resonance
Off to self oscillation

Sig in level
-8 to unity gain

Mod in level
-8 to unity gain

VCA initial gain
Power
Power supply
Eurorack

Current draw
80 mA (+12 V), 50 mA (-12 V)

Physical
Dimensions
81 x 129 x 46 mm (3.2 x 5.1 x 1.8")

Rack units
16 HP

Weight
0.19 kg (0.42 lbs)
Read more
coming soon $93.68
FORTHCOMING
Behringer 305 EQ/Mixer/Output Synth Module
Cat: 799850 Rel: 11 Jan 21
 
EQ/mixer/output synth module
Notes: Legendary Analog Parametric EQ, Mixer and Output Module for Eurorack.

This is the Behringer System 100 305 EQ/MIXER/OUTPUT Module. A parametric EQ, mixer/oscillator and headphone amp combo that's an authentic reproduction of the original "System 100M" circuitry from the 80s that can fit in a standard Eurorack case. The best part? It's at a very affordable price! Mix the 305 in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun!

The 305 allows for maximum tone shaping with its 4-channel EQ section complete with level, bandwidth and frequency controls that span a wide frequency spectrum from 20 Hz all the way up to 20 kHz. Using the two outputs of this section, you can then patch signals to two different modules for some extra modulation and waveform sculpting possibilities and even switch between EQ'd and Bypass modes for a quick comparison.

For added mixing capabilities, you can use the 305's 4-input mixer with individual pan and level controls. The output signal can be in either mono or stereo via 3.5mm and 14" jacks. Monitor your overall signal though the independent headphone output and its included level control.

Installing the 305 EQ/MIXER/OUTPUT is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 305 EQ/MIXER/OUTPUT to be mixed with other synth modules for a truly unique set up.




Read more
coming soon $93.68
FORTHCOMING
Tesseract Modular Tex Mix Master Section Expandable Mixer Module
Cat: 797281 Rel: 31 Jan 21
 
Synth module
Notes: This is the main module of the mixer and the only indispensable one, the only one that needs the eurorack power cable. It provides power to all the other modules and contains the summing circuit for all channels in every audio bus.

32 mA +12V
32 mA -12V
Read more
MRP:$84.33 SAVE 17%
coming soon $70.26
FORTHCOMING
Tesseract Modular Tex Mix 4 Mono Channels Expandable Mixer Module
Cat: 797284 Rel: 31 Jan 21
 
Synth module
Notes: This is a 4 mono channels expansion. Several of these modules can be added to provide more channels. Every channel features:
- Mono input
- Vactrol Gate (plug a CV into the GATE IN to modulate the volume of a channel, just like a classic VCA. When nothing is plugged in the GATE IN, the gate is normalled to fully open)
-SEND A control (switchable PRE/POST, in PRE mode the signal is present regardless to the channel volume control but only if the channel switch is in ON position)
-SEND B control (post-fader)
-PAN control (only affects the master bus)
-VOLUME control (affects the master, cue and POST sends, does not affect PRE-fader send)
-ON/OFF/CUE switch: ON - channel is routed to the master bus
OFF - channel is muted
CUE - channel is routed to the cue bus

13 mA +12V
8 mA -12V
Read more
MRP:$96.37 SAVE 17%
coming soon $80.30
FORTHCOMING
Tesseract Modular Tex Mix 4 Stereo Channels Expandable Mixer Module
Cat: 797287 Rel: 31 Jan 21
 
Synth module
Notes: This is a 4 stereo channels expansion. Several of this modules can be added to get more stereo channels. Every channel features:
Stereo input (L works as mono in)
SEND A control (switchable PRE/POST, in PRE mode the signal is present regardless to the ON/OFF/CUE switch position and channel volume control)
SEND B control (post-fader)
PAN control (only affects the master bus)
VOLUME control (affects the master, cue and POST sends)
ON/OFF/CUE switch: ON- channel is routed to the master bus
OFF- channel is muted
CUE- channel is routed to the cue bus

15 mA +12V
15 mA -12V
Read more
MRP:$96.37 SAVE 17%
coming soon $80.30
FORTHCOMING
Behringer Dual Noise/Random Voltage Generator Module 1016
Cat: 799852 Rel: 11 Jan 21
 
Dual noise/random voltage generator module
Notes: Legendary 2500 series dual noise source module for Eurorack.

This is the Behringer 2500 series DUAL NOISE/RANDOM VOLTAGE MODULE 1016. An authentic reproduction of the original "System 2500" circuitry from the 70's that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the DUAL NOISE/RANDOM VOLTAGE MODULE 1016 in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

The DUAL NOISE/RANDOM VOLTAGE MODULE 1016 is a classic discrete transistor white/pink/random noise source with independent attenuators for the white/pink noise level, a white /pink selector switch with color coded LED's. The slow random voltage generator produces random CV voltages and the maximum level can be controlled via the attenuators as well as an on/off switch with LED indicators for each channel. The 2 channels are completely independent of each other for even more creative possibilities.

The 1016 gives you comprehensive connectivity, each channel has a separate white/pink noise output and separate outputs for the random voltages, the outputs are all available simultaneously to feed multiple noise and CV signals to other modules.

Installing the DUAL NOISE/RANDOM VOLTAGE MODULE 1016 is easy as it is designed to fit into a standard Eurorack case. Just connect the power cable to the power supply and screw in the module using the included screws. This allows for the 1016 to be mixed with other synth modules for a truly unique set up.

Specification:

Outputs
Noise
Type
2 x 3.5 mm TS jacks, DC coupled

Impedance
1 kO, unbalanced

Max output level
i5 V

Random
Type
2 x 3.5 mm TS jacks, DC coupled

Impedance
1 kO, unbalanced

Max output level
i5 V

Controls
Noise
Attenuates noise generator output

Random
Attenuates voltage output

White/pink/of
Selects white or pink noise, or of

Random on/of
Engages or disengages voltage generator

Power
Power supply
Eurorack

Current draw
45 mA (+12 V), 15 mA (-12 V)

Physical
Dimensions
42 x 71 x 129 mm (1.7 x 2.8 x 5.1")

Rack units
14 HP

Weight
0.13 kg (0.29 lbs)

Read more
coming soon $94.81
FORTHCOMING
Tesseract Modular Radioactive Analogue Modelling Digital Oscillator Module
Tesseract Modular Radioactive Analogue Modelling Digital Oscillator Module (digital / oscillator / waveshaper synth module)
Cat: 797271 Rel: 31 Jan 21
 
Synth module
Notes: Analog modelling digital oscillator with phase offset modulation

Radioactive is a small but powerful 14-bit analog modelling voltage-controlled digital sound source: a complete voice Eurorack module in 6HP. It consists of 3 simultaneous independent oscillators, voltage-controlled AR/ASR transient generator, voltage-controlled pitch slew (glide) and voltage-controlled waveshaper with 5 different modes, but that's just the beginning. Its forte consists of selectable gate/trigger/constant envelope timing signals, rather unique 3-voice polyphonic mode, semitone-quantized mode, voltage-controlled waveform selection, on-the-fly selectable 10Vpp CV input range with offset (except for Pitch), a few experimental features, and then some.

Under the hood, it's a chiptune-inspired wavetable-gnawing sound cruncher with a mind of it's own, and oh boy it's dirty. It could be described as raw and untamed, but it would probably be an understatement.

Operation:
V/Oct Pitch input with attenuator
3 CV inputs with offset (Glide/Attack, Release, Shaper)
Trig/Gate input for envelope triggering/gating
Wave change trigger input
Single button with 3 different functions: waveform change with short press, shift function (alternate control parameter) with long press, enter setup mode on power-up.
3 green illuminated indicators of selected waveform and their combinations, also providing information in setup mode
Single red illuminated indicator of incoming trigger or high/low gate signal
Simple and intuitive setup without menu diving (parameters are saved and recalled at start-up)
3 different operation modes (A, B & C) selectable in setup:
A - Free range oscillator with Attack and Release envelope
B - Free range oscillator with Release envelope and Glide
C - Quantized oscillator with Release envelope and Glide
3 different envelope activation modes (G, T & P) selectable in setup:
G - Gate mode, monophonic
T - Trigger mode, monophonic
P - Poly mode, 3-voice polyphonic
5 different wave shaper modes selectable in setup and at runtime
9 basic waveforms and 12 different combinations

Specifications:
VCDO sound source with thousands of possible waveform shapes
All inputs: 100k impedance, 512Hz DC rate
32kHz refresh rate
14-bit sound generation
10-bit CV capture
V/oct input range: 0 to +5V (C1-C6 with octave shift control to cover the entire C0-C8 range)
CV input range: on-the-fly selectable 0 to 10V, -5 to +5V or any other 10Vpp range between -10 and +10V
Trig/Gate input range: 0 to +10V (0V closed, 3V+ open), protected
Output levels: -5V to +5V (10Vpp), envelope/shaper mode dependable
Professionally designed front panel with all linked functions clearly labeled in different colours
Comprehensive User guide covering all operation modes and extensive Build guide for DIYers

42 mA +12V
10 mA -12V
0 mA 5V
25 mm deep
Read more
MRP:$103.06 SAVE 17%
coming soon $85.88
FORTHCOMING
Tesseract Modular 8x8 Buffered Matrix Module
Tesseract Modular 8x8 Buffered Matrix Module (multiple / switch / utility synth module)
Cat: 797244 Rel: 31 Jan 21
 
Synth module
Notes: This module is a 8 ins and 8 outs precision buffered matrix.

Every output has a rotary switch to select an input. You can make the same input go through several outputs but not several inputs go to the same output.

There's also a bicolor led next to every switch for visual info of the signal that is going thru it.

Allows fast patch changes and easy rerouting signals, both audio and cv.

Can be used as a traditional buffered multiple, pretty flexible one: 1 x 8 outs, 2 x 4 outs, 4 x 2 outs or any other combination.

62 mA +12V
65 mA -12V
Read more
MRP:$113.77 SAVE 17%
coming soon $94.81
FORTHCOMING
Tesseract Modular Selecta 8-Channel OR Combiner & A/B Switch Module
Cat: 797261 Rel: 31 Jan 21
 
Synth module
Notes: This module has 4 channels of OR Combiner and 4 channels of A/B Switch.

This new version has a reversible panel, so the switches can be placed on the left or the right side.

The OR Combiner is conceived to select or sum trigger and/or gate signals, each channel has 2 inputs (A & B) and one output. A switch select which signal would be present at output, being the middle position of the switch the sum of both. It could be used with other type of signals but only the positive part of these would be present at the output stage (with a small lack of voltage because of the diodes and the pulldown resistor), so it could work with envelopes for example. With bipolar voltages the OR COMBINER channels will work as a Half-wave rectified output (the negative half of the signal is clipped to 0V) This can add many harmonics to audio signals, the combination of 2 oscillators will give as result a sort of 'ring modulator' sound.

The A/B Switch selects between A and B and the middle position of the switch is a "mute", works with any kind of signal (cv or audio) and is bidirectional. Can be used with 2 input signals and 1 output or 1 input signal and 2 outputs.

The circuit of the first version has been re-designed to avoid the bleeding among other issues.

This module does not draw any power.

Read more
MRP:$66.93 SAVE 17%
coming soon $55.76
FORTHCOMING
Tesseract Modular Blinks VU Meter Module
Cat: 797275 Rel: 31 Jan 21
 
Synth module
Notes: VU meter for eurorack.

BLINKS is a VU meter for eurorack with 24 RGB leds per channel, function is pretty easy, it has 2 inputs, one for each led column (no output).

PATT button changes the led pattern ( 6 patterns to choose ).

SENS button changes the input sensitivity, cycling in 7 steps.

Long pressing the PATT button enters the color scheme selection.

Long pressing SENS button enters the brightness adjustment. Most probably you'll prefer the lowest setting.

The module has a 5v regulator in case you don't have 5v in you eurorack PSU. A jumper in the back select if the led board would be powered by the 5v rail or the internal regulator (which works with the +12v rail)

Up to 3 stereo signals can be connected to a buffered input using the rear headers.

Easy DIY with only a few components, the led board is already assembled.

5v not indispensable
+5v: 30 mA (on lowest brightness)
+12v: 4mA (or ~40mA if 5v rail is not used)
Read more
MRP:$60.23 SAVE 17%
coming soon $50.18
FORTHCOMING
Tesseract Modular VC Logics Dual Logic Gates Module
Tesseract Modular VC Logics Dual Logic Gates Module (dual & stereo / logic synth module)
Cat: 797265 Rel: 31 Jan 21
 
Synth module
Notes: 2 x Logic gates with voltage controlled boolean function selection.

Logic gates are used in order to combine GATE signals to conditional event. For example it can be used to combine the GATE signals from various sequencers to get different patterns.

The module has 2 logic processors, the boolean function can be selected with the potentiometer, the CV input or the push button. The CV input range is 0 to 8V, but the potentiometer will work as an offset, so for example, placing the pot in the center position will allow the use of bipolar i4v CV sources like LFOs etc. The input is protected so voltages over 8v will be trimmed out.

Each processor can work in 2 modes:

-Free: when the boolean function changes the output changes according to the inputs & logic type.

-Quantized: when the boolean function changes the output won't change until there is a change in any of the inputs, that way you won't get out of time beats when using the module for percussions with and LFO in the CV input ...for example.

To change the mode long press the button (1 second) if the mode you've just entered is the 'free' one you'll see a pattern on the leds.

CV input 1 can be set to be a trigger input with a jumper in the back of the module, to work just like the push button, so any incoming trigger will jump to the next boolean function, those functions are:

AND
OR
XOR
NAND
NOR
XNOR

42 mA +12V
10 mA -12V

4 HP
Read more
MRP:$72.28 SAVE 17%
coming soon $60.22
FORTHCOMING
AniModule AnVilope Module
AniModule AnVilope Module (clock generator / envelope generator / LFO synth module)
Cat: 794381 Rel: 31 Dec 20
 
Envelope generator module
Notes: A Simple, Affordable, 4HP, Analog Envelope Generator.

Attack, Decay, Release... Simple.

- Envelope Out 0V to +7V
- Loop function so you can use it as a Variable Wave-Shape LFO / Timer
- Inverted out that goes from +7V to 0V

Function:
When the gate is High the envelope will rise and cycle through it's phases.
When gate goes low again the envelope will revert to the release phase.

If the Gate is longer than the ADR phases, the decay will play out then go to release and the envelope will end after the release.

Sprinkle them all over your system!

4HP Depth : 28mm
Read more
MRP:$115.11 SAVE 17%
coming soon $95.92
FORTHCOMING
AniModule Line_Amp Module
AniModule Line_Amp Module (multiple / preamp / utility / dual stereo / external synth module)
Cat: 793793 Rel: 31 Dec 20
 
Buffered multiple module
Notes: Check out AniModule's Line to Synth Level Converter.

2 Channels of 1 in <--> 2 Out.

Each channel is designed to multiply your input by *3 to boost your Line Gear / Tablet / Phone so you can integrate audio OR Control Voltages from your auxiliary systems.

Each channel's input is designed with Line Level gear's input impedance in mind.

Perfectly compatible with Synth Output Impedances, but the standard Synth Input Impedance is higher than Line level equipment is expecting.

Don't need to amplify your XPhone right this minute? Never fear! Just Hit the Switch!

This module won't sit unused in your cabinet breeding resentment and dust bunnies.

Hit the switch and that channel becomes a normal 2 HP Unity Gain Buffered Mult.

Only need one channel of each? It's YOUR Choice!
Read more
MRP:$111.10 SAVE 17%
coming soon $92.57
FORTHCOMING
Michigan Synth Works USB2MIDI 5 Port TRS MIDI Output Module (black faceplate)
Cat: 802353 Rel: 18 Jan 21
 
TRS MIDI output module
Notes: This device provides 5 TRS MIDI out ports in a slim 2HP package.

5 MIDI OUT (only) ports, 16 channels per port

25mm depth

3 Aux headers for internal MIDI connections (ports 1-3)

TYPE A TRS MIDI Standard

Solid Ploytec GM5 technology

Class compliant USB
Read more
MRP:$105.74 SAVE 22%
coming soon $82.53
FORTHCOMING
Michigan Synth Works 2HP2CV USB to CV Adapter Module (black faceplate)
Cat: 802356 Rel: 18 Jan 21
 
USB to CV adapter module
Notes: 2HP adaptation of Mutable Instruments CVpal

Width: 2HP

MINI USB connection

LED indicators for Gate activity

Depth: 17mm

Fully Calibrated
Read more
MRP:$70.94 SAVE 23%
coming soon $54.65
FORTHCOMING
Michigan Synth Works F8R Output Expander Module (black faceplate)
Michigan Synth Works F8R Output Expander Module (black faceplate) (controller/expander/MIDI/multiple synth module)
Cat: 802350 Rel: 18 Jan 21
 
Output expander module
Notes: F8R Output Expander adds 3 TRS midi outputs (multiples of the MIDI out of the 8m), 3 fully buffered I2C TRS headers, and an optional 1x3 TRS Through.

I2C:

The 3 I2C outputs are fully buffered and allow for very long connections to other devices. They are all multiples of the I2C output of the 8m.

MIDI:

MIDI Out: Single Output from 8m. If nothing is plugged into this jack, the MIDI data is forwarded to the 1x3 MIDI through.

MIDI IN: MIDI input to the 1x3 MIDI through, connecting an input will disconnect the MIDI out from the 8m. This input can accept TRS MIDI A or B cables

Multiple MIDI Outs: Fully buffered midi outs

2HP Width, 22mm Depth, TRS MIDI TYPE A outputs

Current Draw: N/A, Connects to 8m
Read more
MRP:$70.94 SAVE 23%
coming soon $54.65
FORTHCOMING
Michigan Synth Works BLN Audio Level Converter Module (black faceplate)
Cat: 802359 Rel: 18 Jan 21
 
Audio level converter module
Notes: BLN is a 4 channel audio level converter designed to interface line or "pro" audio levels to modular audio levels. It features 2 independent converters with 2 channels each.

Converter 1: Line level/Balanced to Modular Level

The inputs for the top converter are for converting -10dB or +4dB signal levels (balanced or unbalanced) to +/-5V modular levels. Each channel can be set individually for +4 or -10 using channel 1 and 2 of the DIP switched

Converter 2: Modular level to Balanced Lined

The inputs for the bottom to converters accept a +/-5V modular audio level and converts them to a BALANCED +4 dB or -10 dB audio level. Each channel can be set individually for +4 or -10 using channel 3 and 4 of the DIP switched.

For balanced signals, simply use a 3.5mm TRS to 1/4" TRS Cable or 3.5mm TRS to 3.5mm TRS cable with a 1/4" TRS adapter. Unbalanced signals should use a 3.5mm TS cable

2HP Width, 32mm Depth

Current Draw: 12/14 mA +12/-12

Please note: This devices uses a polarized power cable, please make sure the red stripe corresponds to the white stripe on the board
Read more
MRP:$105.74 SAVE 22%
coming soon $82.53
FORTHCOMING
Neutron Sound QMIX Quad Mixer (black faceplate)
Cat: 802487 Rel: 18 Jan 21
 
4-channel mixer module
Notes: Neutron QMIX is an 8HP 4 channel mixer which can be expanded with internal jumpers and additional QMIX modules. The device has 2 mix outs and 2 AUX outs. The AUX out can be mixed from pre or post fader. LED sliders available in Red or Green. LEDs on the sliders show the input signal level (not the mix level).
Read more
MRP:$140.54 SAVE 31%
coming soon $97.03
FORTHCOMING
Neutron Sound QAT Quad Attenuverter Module (black faceplate)
Neutron Sound QAT Quad Attenuverter Module (black faceplate) (attenuator/CV modulation/mixer/utility synth module)
Cat: 802483 Rel: 18 Jan 21
 
Quad attenuverter module
Notes: Neutron QAT is a 8HP, 4 channel attenuverter with switchable linear or audio taper potentiometer response. individual,pre and post attenverter mix outputs are available. Red/Green LEDs.
Read more
MRP:$140.54 SAVE 31%
coming soon $97.03
FORTHCOMING
Equinox Synth VCA Analogue Voltage Controlled Amplifier Module
Cat: 802082 Rel: 28 Feb 21
 
Analogue voltage controlled amplifier module
Notes: The VCA is all about controlling the volume of the signal, both attenuation and a bit of amplification. All without distorting the signal. The Equinox VCA is based on the very high performance THAT Corp 2181 Blackmer trimmable VCA ICs, often found in top end studio hardware. We have kept component count to a minimum to ensure the audio signal path is kept as clean as possible.

The two controls on the Equinox VCA are for overall volume and the CV Depth. The CV input controls how much the signal is attenuated or amplified, this would usually be controlled by an envelope generator, such as the Equinox ADSR. This gives the artist control over how the amplitude or volume of a sound evolves over time. From hard hitting kicks to gently evolving pads, the VCA is the primary module for precise volume control within the modular synthesiser.

Current Draw: +12V: 20mA, -12V: 20mA

Depth: 25mm

HP: 4HP
Read more
MRP:$93.70 SAVE 17%
coming soon $78.07
FORTHCOMING
Equinox Synth VCF Analogue Voltage Controlled Filter Module
Cat: 802077 Rel: 28 Feb 21
 
Analogue voltage controlled filter module
Notes: The VCF is possibly one of the most important modules within a modular synthesiser. The Equinox VCF was designed with two classic instruments in mind: the SH-101 and the TB-303, both possessing key sonic elements in electronic music culture. Combined with the VCO, the Equinox VCF provides an incredibly rich palette of squelches and squeals, from throbbing basslines through to mix cutting leads. With two VCOs connected to the two mixed inputs, this module can produce the fattest of sounds.

The main role of the Low Pass Filter in subtractive synthesis is to remove higher harmonics from a waveform, altering the sound into new timbres. Filtering all harmonics from a waveform will result in just a sine wave oscillating at the fundamental frequency, great for hard punching kick drums. An alternative method for producing sine waves is to crank the Resonance control to maximum, causing the filter to go into self oscillation. The pitch of this very pure sine wave can now be controlled either via the Cutoff knob or the CV In.

Current Draw: +12V: 20mA, -12V: 20mA

Depth: 25mm

HP: 8HP
Read more
MRP:$113.77 SAVE 17%
coming soon $94.81
FORTHCOMING
Equinox Synth ADSR Analogue Attack Decay Sustain & Release Module
Cat: 802084 Rel: 28 Feb 21
 
Analogue attack decay sustain & release module
Notes: The ADSR Envelope Generator's primary role in the modular synthesiser is to take a Gate input and generate dynamic control voltages which change over time. The Gate is usually provided by a sequencer or keyboard, when a key is pressed the gate goes high, which the key is released the gate goes low. The code within the module translates this gate signal to the various stages of the control envelope: Attack, Decay, Sustain and Release. This control voltage out can then be patched into a VCA to control volume, VCF to control frequency cutoff or VCO to control other modulation parameters such as FM or PWM.

Linear vs Exponential

The human ear hears both volume and pitch exponentially, so having exponential control over these elements is crucial. It's usual to drive a VCA with an ADSR, however only one of these should be exponential.

Linear ADSR vs Linear VCA: No exponential control.
Expo ADSR vs Linear VCA: Good exponential control.
Linear ADSR vs Expo VCA: Good exponential control.
Expo ADSR vs Expo VCA: Too much exponential control.

The Equinox VCA and VCF are exponential, the VCO has both exponential and linear control.

Current Draw: +12V: 20mA, -12V: 20mA

Depth: 25mm

HP: 8HP
Read more
MRP:$93.70 SAVE 17%
coming soon $78.07
FORTHCOMING
Equinox Synth LFO Smart Digital Low Frequency Oscillation Module
Cat: 802087 Rel: 28 Feb 21
 
Digital low frequency oscillation module
Notes: The Equinox LFO provides control over the Rate, Depth and Offset, and has two waveforms: sine and square. These can be patched into all modules which have a control voltage input, giving access to a huge range of synthesis techniques such as FM and PWM. The depth control sets the amplitude of the signal, from 5VP right down to a DC level. The offset control moves the signal either up towards +5V or down towards -5V. The module is smart enough to know when the depth is maximum, there's no room for the offset to move, but when the depth is at it's minimum, i.e. DC, the offset can move that level anywhere between +5V and -5V. A sync input is also provided, resetting the waveform so it can be synced with sequencers or other modulation sources within the modular synthesiser.

Current Draw: +12V: 20mA, -12V: 20mA

Depth: 25mm

HP: 8HP
Read more
MRP:$93.70 SAVE 17%
coming soon $78.07
FORTHCOMING
Livestock Electronics Felix Buff Mult Module
Cat: 802751 Rel: 18 Jan 21
 
Buffered multiple module
Notes: What if you could use one modulation source and adjust it for multiple parameters, create a bus to send audio sources to effects, or even create a macro controller?! A certain cat has got your back!

Felix is a 1:6 or 2x1:3 buffered multiple with an attenuator or attenuverter per output. It is great for distributing a source to different parameters and controlling the gain and/or direction for a specific parameter.

But it can also be used for audio, which makes it great for creating auxiliary busses.

Finally when no source is given the module can be used as a stable voltage distributor. Really useful for creating DC offsets or macro controls!

Width: 6HP

Depth (Back): 20MM

Depth (Front): 15MM

Weight: 65g

Max @ +12V: 32mA

Max @ -12V: 30mA
Read more
coming soon $92.57
Artículos del 1 al 25 de 25 en la página 1 de 1

Filter

Coming Soon: Studio Equipment
Close