100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

Inicio  Coming Soon  

Studio Equipment

Options
Artículos del 1 al 50 de 712 en la página 1 de 15
1  2  3  ...  15  »
FORTHCOMING
Behringer TD3 AM Analogue Bass Line Synthesiser (yellow)
Cat: 772986
 
bass line synthesiser
Notes: Only produced from 1981 to 1984, the Roland TB-303 was a tremendous commercial flop as a replacement for the bass guitar, however it soon found its place as one of the most-loved synthesizers for what became known as Electronic Dance Music (EDM). An ultra-affordable and faithful homage to the iconic synthesizer that spawned house music, plus an all-new Distortion circuit, the TD-3-AM lets you conjure up virtually any sound with incredible finesse and ease. With its pure analog signal path, 16-step Sequencer and authentic VCO, VCF and VCA filters, the TD-3-AM is sure to become one of your favorite synthesizers.

Great care has been taken in engineering the TD-3-AM, including the true to the original VCO, VCF and VCA designs and pure analog circuitry with matched transistors. This highly-focused attention to detail is what gives TD-3-AM its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects - all the way out to the otherworldly sounds of your imagination.

Your TD-3-AM comes ready to rock, thanks to its default signal routing that doesn't require lifting a single patch cable to instantly create amazing sounds. The highly-intuitive layout lets you easily tap into the inspired sounds of 1980s and '90s progressive rock, wave, EDM and synth-pop music tracks that made rock and roll history - or to design incredibly fat and original sounds that will make you a legend in your own right.

The very heart of TD-3-AM's sound is its versatile 24 dB/octave filter, which lets you freely experiment with the low-pass Cutoff frequency and Resonance settings to dial in the perfect sound.

TD-3-AM's authentic Voltage Controlled Oscillator (VCO) with transistor wave-shaping circuitry is ultra-easy to use and provides your choice of reverse-sawtooth or pulse waveforms for the ultimate in sound creation.

The onboard sequencer with 7 tracks allows you to program up to 16 steps of notes and rests and save them as a Pattern. You can record, save and recall up to 250 patterns, all of which can be stored in the 4 Groups. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode which allows you to interact while composing a pattern.

When you want to add even more power to your performance, just flip the Distortion On/Off switch and dial in the perfect amount of Drive to push the envelope to the max.

While it is a monophonic instrument (one note at a time), TD-3-AM's 16-note Poly Chain function lets you combine multiple synthesizers for up to 16-voice polyphony - plus provides vastly improved reliability and stability over its 1970s and '80s predecessors.

TD-3-AM has 11 controls and 28 switches to give you direct and real-time access to all important parameters, all laid out in a highly-intuitive format that puts the joy back into your music creation. And you can expand TD-3-AM's tone-sculpting capabilities beyond your wildest dreams by utilizing the multi-I/O patchbay to connect external devices.
Read more
coming soon $109.05
FORTHCOMING
Polyend Tracker Drum Machine Sampler & Sequencer
Polyend Tracker Drum Machine Sampler & Sequencer (drum machine sampler & sequencer)
Cat: 770612
 
drum machine sampler & sequencer
Notes: The Polyend Tracker is a unique take on a retro form factor, aimed at artists who break patterns on a daily basis. Don't let the classic look fool you, Tracker is equipped with powerful modern functionality, FX, and the forward thinking creative tricks that Polyend brings to all of their highly regarded instruments.

The Polyend Tracker is an innovative, inspiring and immediate tool for music-making. It functions as a sampler, a synthesizer, a powerful sequencer, and a MIDI controller.

A retro form factor updated with forward looking functionality and designed as an easy to use compact standalone workstation. Made for the creatives who break patterns on a daily basis. Designed to help artists forge unique avenues of sonic construction. Introducing the first hardware tracker in the music world.

Large screen, ergonomic keyboard, and a big knob for fast and easy navigation.
It's standalone and portable - everything you need to produce an album wherever you are.
Sampler, Wavetable or Granular Synthesizer and FM Radio for limitless inspiration.
Powerful Step Sequencer and Song Arranger for finishing your piece in a flash.
Performance mode lets you creatively break, mangle, and augment your patterns when playing live.
Bidirectional MIDI to play with other software and hardware.

The Polyend Tracker incorporates the quintessential characteristics of a classic tracker. The vertical timeline, the powerful sequencer and the mechanical keyboard combined with a newly designed input interface enables you to make and perform your music in a new and intuitive way. After a quick glance and a few minutes with the Polyend Tracker interface, you'll soon realize the array of tools that are at your fingertips.

Polyend Tracker is slick, light and portable. It's also easy on the energy consumption so you can use it with any USB power source. Its sturdy and compact form factor makes it a great companion for music creation wherever and whenever you feel like it. No matter if you're in your studio, on the run, or at the gig.

Polyend Tracker is equipped with a variety of powerful sound design tools. Use your existing sample library, record new ones with line or mic inputs, or use the built-in FM radio. Record samples, play them, slice them, mash them, or even make a synth out of them using Wavetable and Granular synthesis with its all necessary parts (filters, ADSRs, etc.)

Polyend Tracker works great with other instruments too. Thanks to the bilateral MIDI implementation, you can use it to sequence and control external gear or it can be used as a sound module controlled by any external MIDI software or hardware devices.

In the box
Polyend Tracker
USB-A power adapter
USB-C cable (2 m)
3.5 mm to 2x 6.3 mm adapter
Minijack to MIDI DIN adapter
16GB MicroSD Card
MicroSD to USB-A Adapter
Manual
Read more
MRP:$567.11 SAVE 17%
coming soon $472.60
FORTHCOMING
Behringer TD 3 BK Analogue Bass Line Synthesiser (black)
Cat: 773200
 
line synthesiser
Notes: Only produced from 1981 to 1984, the Roland TB-303 was a tremendous commercial flop as a replacement for the bass guitar, however it soon found its place as one of the most-loved synthesizers for what became known as Electronic Dance Music (EDM). An ultra-affordable and faithful homage to the iconic synthesizer that spawned house music, plus an all-new Distortion circuit, the TD-3-BK lets you conjure up virtually any sound with incredible finesse and ease. With its pure analog signal path, 16-step Sequencer and authentic VCO, VCF and VCA filters, the TD-3-BK is sure to become one of your favorite synthesizers.

Great care has been taken in engineering the TD-3-BK, including the true to the original VCO, VCF and VCA designs and pure analog circuitry with matched transistors. This highly-focused attention to detail is what gives TD-3-BK its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects - all the way out to the otherworldly sounds of your imagination.

Your TD-3-BK comes ready to rock, thanks to its default signal routing that doesn't require lifting a single patch cable to instantly create amazing sounds. The highly-intuitive layout lets you easily tap into the inspired sounds of 1980s and '90s progressive rock, wave, EDM and synth-pop music tracks that made rock and roll history - or to design incredibly fat and original sounds that will make you a legend in your own right.

The very heart of TD-3-BK's sound is its versatile 24 dB/octave filter, which lets you freely experiment with the low-pass Cutoff frequency and Resonance settings to dial in the perfect sound.

TD-3-BK's authentic Voltage Controlled Oscillator (VCO) with transistor wave-shaping circuitry is ultra-easy to use and provides your choice of reverse-sawtooth or pulse waveforms for the ultimate in sound creation.

The onboard sequencer with 7 tracks allows you to program up to 16 steps of notes and rests and save them as a Pattern. You can record, save and recall up to 250 patterns, all of which can be stored in the 4 Groups. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode which allows you to interact while composing a pattern.

When you want to add even more power to your performance, just flip the Distortion On/Off switch and dial in the perfect amount of Drive to push the envelope to the max.

While it is a monophonic instrument (one note at a time), TD-3-BK's 16-note Poly Chain function lets you combine multiple synthesizers for up to 16-voice polyphony - plus provides vastly improved reliability and stability over its 1970s and '80s predecessors.

TD-3-BK has 11 controls and 28 switches to give you direct and real-time access to all important parameters, all laid out in a highly-intuitive format that puts the joy back into your music creation. And you can expand TD-3-BK's tone-sculpting capabilities beyond your wildest dreams by utilizing the multi-I/O patchbay to connect external devices.
Read more
coming soon $103.86
FORTHCOMING
LEP Leploop Sequencer & Drum Machine Analogue Synthesiser
LEP Leploop Sequencer & Drum Machine Analogue Synthesiser (sequencer & drum machine synthesiser)
Cat: 770286
 
analogue synthesiser
Notes: Laboratorio Elettronico Popolare (L. E. P. ) is proud to present to you a one-of-a kind analog synthesizer, sequencer and drum-machine: LEPLOOP.

Small in nature but aggressive in sound, the user will be able to create a variety of analog timbres and beats.

LEPLOOP was designed to be a minimalist electronic music live-performance groove-box, which can be used to create a variety of electronic musical styles.

The LEPLOOP can be synched via MIDI to another LEPLOOP for tempo-synched operation or to another MIDI device or sequencer to receive sequence stop & start instructions.

1 oscillator (VCO1) triangular/square wave
1 oscillator (VCO2) sawtooth wave with ring modulator and FM modulation
White noise generator
24 dB/OCT Low pass filter
Kick drum with distorsion and trigger mixer
2 VCA's
2 AR Envelope generators
1 LFO
16 Capacitors analo sequencer PWM programmable
4 Track digital rhythm sequencer 64 step each track
4 Channel audio mixer
Midi input(clock and notes)
5 CV out: S\H, SEQ, LFO, ENV1, ENV2
3 gate out: S\H, SEQ, CASSA
3 CV in: VCO1, VCO2, VCF cutoff
1 audio in (VCF)
4 audio out: MIXER, CASSA, VCO2, VCO mix
1 clock output: clock 24, MIDI start/stop
EEPROM memory 16 banks 10 pattern each
Read more
coming soon TBA
FORTHCOMING
Waldorf Iridium 16 Voice Digital Polyphonic Synthesiser
Cat: 780395
 
digital polyphonic synthesiser
Notes: Tracing the footsteps of its bigger brother, Iridium features all the synthesis elements of Quantum as well in a rack-compatible format. The combination of the powerful engine, incredible flexibility and detailed sound shaping facilities creates sheer endless possibilities of sound. Yet, the comprehensive layout and easy-to-understand structure lets you design your own sounds in no time. Sporting a solid metal casing and the same high level of craftsmanship like Quantum, Iridium is now ready to take over studios and stages throughout the world.

Contributing another entry in Waldorf's rich history, Iridium joins the family as a direct descendant of the PPG Wave. Though, Iridium offers much more than its ancestor. Five different synthesis models are provided by Iridium for each of the three oscillators:

Wavetable
Waveform (Virtual Analog)
Particle (Sampling and Granular Sampling)
Resonator
Kernels

Kernel mode has been introduced with the OS 2.0 of Quantum. This huge upgrade allows one oscillator to be turned into up to six sub oscillators. These can be interlinked through FM at audio rate and arranged in user-definable constellations. Just this upgrade alone would have provided enough additional features to create a synthesizer on its own. Now, all those functions have been integrated into Iridium as well.

Up to 7000 patches can be saved in Iridium. Patches from Quantum can be loaded in Iridium and vice-versa.

Iridium features three digital filters per voice. Two in the Dual Filter section and another one in the Digital Former. Several types are available to choose from:

12 or 24dB and Lowpass/Highpass/Bandpass with optional saturation or dirtiness.
Various filter models are available including those from Waldorf Nave, Largo and PPG 3V.
The Dual Filter section can be controlled independently or together in several different link modes.
The Digital Former offers all the filter types and models from the Dual Filter plus unusual models like Comb, Drive, Bitcrusher and more in addition.

All filters retain a true stereo signal throughout the entire structure of the instrument.

Up and down, back and forth
6 Envelopes, 6 LFOs and many more are just waiting for being used as sources in the 40 slots of the Modulation Matrix. Each slot has one additional control amount. Modulations can be directed to almost every numerical value in Iridium. All sources and destinations can be used as many times as desired until the Modulation Matrix is full. If you ever happen to run out of LFOs or Envelopes, you can use the Komplex Modulator for generating a custom shape LFO or Envelope.

Even though Iridium features a staggering amount of parameters to control, everything is organized in a logic structure which is easy to master. The major controls have their own dedicated knob, while the rest is accessible through the touch screen and the encoders around. There are no long menus keeping you from doing what you had planned. Instead, you will find a workflow which you will soon miss on other synthesizers.

Embedded in the front panel, a 4x4 silicon pad matrix invites you to launch notes, chords, arpeggios and sequences with up to 32 steps for notes and multiple parameter lines. Direct access to the parameters is granted by the seven encoders to the left and the right hand side of the touch screen.

Iridium's large color touch screen keeps you informed at all times. Upon moving a knob, Iridium gives you an optical feedback of your changes in real-time. Filter curves move, Particle grain sizes change, Envelopes warp and much more:

Komplex Modulator curves can be drawn with your finger
Envelopes show at which point the voices currently are
Wavetables are displayed in comprehensive view modes
VU meters show which voices are used and the individual voice levels
Different Analyzers show the audio signal at different points

Two Audio Outputs allow you to listen to Iridium, while two Inputs allow Iridium to process external signals. 4 CV inputs plus Gate In and Trigger In are ready to forward external signals to the Mod Matrix. Furthermore, Clock In and Clock Out will get your gear in sync. MIDI connections can be made through USB and DIN MIDI. Iridium is also equipped with a USB Host port for MIDI devices. This port also handles data exchange, in addition to the MicroSD card slot.

Once again, Waldorf have underlined their status with a new and exciting synthesizer.
Read more
MRP:$2,486.57 SAVE 17%
coming soon $2,072.14
FORTHCOMING
Sonicware Liven 8bit Warps Synthesiser & Sequencer
Cat: 762318
 
waveform memory synthesiser & sequencer
Notes: The LIVEN 8bit warps combines an 8-bit waveform memory synthesizer with a step sequencer.

Carefully selected preset waveforms and editable user waveforms along with high-quality filters and effects can be used freely to create a wide spectrum of sounds. The LIVEN 8bit warps can generate classic retro game sounds of course, but its unique 8-bit sound can also be used in a range of music genres, including EDM, hip-hop, techno and rock.

Powerful functions for live electronic music performance include 16 physical control knobs, parameter locking for each sequencer step, a looper, and SYNC IN/OUT and MIDI IN/OUT connectors to make synchronized performance with other equipment easy.

All these powerful functions are in a device that weighs only 790 g. Play it anywhere at any time.
Read more
coming soon TBA
FORTHCOMING
Behringer Eurorack Go Case
Cat: 772854
 
eurorack case
Notes: The EURORACK GO was engineered specifically to protect your favorite synthesizer modules and similar 3U electronics. With 2 rows of 140 HP useable mounting space (for a total of 280 HP), the rugged aluminum chassis features 96 sliding nuts for ultra-easy positioning of your precious gear. In the studio or on the road, the EURORACK GO is the ideal way to protect your rig - wherever the gig takes you.

One of the features that separates EURORACK GO from competing products is the massive, ultra-low noise power supply. The auto-ranging universal switch-mode supply works anywhere in the world and uses 32 keyed power connectors to protect your valuable modules from accidental reverse power hookup.

Designed for rugged reliability, the all-aluminum chassis houses an adjustable support plus oversized rubber feet to provide 0-50- setup capability and ensures rock-solid stability for use on a wide range of surfaces.

Read more
coming soon $263.81
FORTHCOMING
Behringer 140 Dual Envelope/LFO Module
Cat: 772884
 
dual envelope & LFO module
Notes: This is the Behringer SYSTEM 100 140 DUAL ENVELOPE/LFO. An authentic reproduction of the original System 100M circuitry from the 80's that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the 140 DUAL ENVELOPE/LFO in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

The 140 DUAL ENVELOPE/LFO features 2 independent ADSR envelope generators that can be controlled via an external gate or manual triggering. Each envelope generator comes with a Manual Gate that you can press and hold to start the envelope cycle; independent Attack, Decay, Sustain and Release controls to adjust the rate of these parameters and 3.5 mm envelope outputs that allows you to send up to two positive wave forms out to two modules and one negative wave form.

The LFO on the 140 comes with 5 waveforms: sine, triangle, square, ramp and saw tooth. The Frequency Range switch which sets the oscillating frequency of the LFO along with the Frequency and Delay sliders gives the 140 unparalleled flexibility when it comes to shaping LFO's. You can also connect an external trigger switch which can work with the Delay control to phase lock the LFO to your keyboard playing.

Installing the 140 DUAL ENVELOPE/LFO is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 140 to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $103.86
FORTHCOMING
Black Corporation Deckard's Dream Mk2 Desktop Synthesiser
Cat: 767533 Rel: 31 Aug 20
 
desktop synthesier
Notes: DECKARD'S DREAM, or DDRM, features eight voices, each with two identical layered parts consisting of a 100% analog voltage controlled oscillator made with discrete waveshapers, analog lowpass and highpass filter (each with their own cutoff and resonance settings,) noise generator, unique multisegment filter envelope, and VCA + ADSR envelope. Each layer also features its own independent programming section for MPE-based velocity and polyphonic aftertouch control of its filter cutoff and amplifier settings.

DDRM's perfomance section features global pitch control with coarse & fine-tuning sliders, layer 2 detune slider, independent keyboard range control for each layer, mix balancing between layer 1 and layer 2, global filter cutoff and resonance offsets, and a global LFO to control both layers' filter/pitch/amplifiers simultaneously.

DDRM was created with full expressive performance control in mind, and boasts programming sections for global MPE-based control over LFO parameters + pitchbend, as well as global key tracking control over the filter and amplifier settings of both layers. Finally, there is a global portamento/glissando slider affecting both layers simultaneously. The level of expressive control these parameters give over a performance is something found in very few synthesizers, and the result are stunning!

DDRM features full MIDI control and the ability to store 128 presets per bank across 3 banks, integrating this classic synth concept seamlessly into the future of your modern studio needs.

DECKARD'S DREAM MK2 delivers everything the previous versions of DDRM in a new thin and light tabletop format with woodsides or rack-ears (both included). It also brings additional controls over Sustain modes and timing.
Read more
MRP:$4,610.43 SAVE 17%
coming soon $3,842.03
FORTHCOMING
Behringer 121 Dual VCF Module
Cat: 772865
 
dual VCF module
Notes: This is the Behringer SYSTEM 100 121 DUAL VCF Module. An authentic reproduction of the original System 100M circuitry from the 80s that can fit in a standard Eurorack case, at a very affordable price. Mix the 121 DUAL VCF in with your existing rig or start your modular synth journey from here.

The 121 DUAL VCF features 3 CV inputs and 3-channel mixers per VCF; allowing you to independently mix all input signals. All of these inputs have their own attenuators to provide you more control over each signal that goes into the module.

Each VCF has its own output accompanied by a resonance slider that boosts resonance frequencies and a cutoff control to adjust the cutoff frequency of the lowpass filter. The 121 DUAL VCF also features a 3-mode Fixed HPF switch where you can select between Off, 1 (1 kHz), 2 (2 kHz) or 3 (5 kHz). Combine this with the resonance and cutoff sliders to create intricate and interesting patches.

Installing the 121 DUAL VCF is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 121 DUAL VCF to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $103.86
FORTHCOMING
Behringer 150 Ring Mod/Noise/S&H/LFO Module
Cat: 772880
 
150 ring/mod/S&H/LFO module
Notes: This is the Behringer SYSTEM 100 150 RING MOD/NOISE/S&H/LFO. An authentic reproduction of the original System 100M circuitry from the 80's that can fit in a standard Eurorack case- at a very affordable price. Mix the 150 RING MOD/NOISE/S&H/LFO in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

The 150 RING MOD/NOISE/S&H/LFO comes with a ring modulator to create some metallic and bell-like sounds that can be applied to any signal such as a sine wave or a signal from an LFO via the EXT SIG X/NOISE and EXT SIG Y/LFO jacks and out the RING MOD output. The LFO features 5 waveforms including sine, triangle square, ramp and sawtooth. Parameters can be further adjusted by the FREQ and DELAY sliders.

If you want to start layering your song on a droning note or maybe just create some ambience in your music, then you can connect any external signal source into the S&H circuit. A 3-way selector switch allows you to select which type of signal being introduced into the SIG IN jack whether its External Input, LFO or Noise.

Installing the 150 RING MOD/NOISE/S&H/LFO is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 140 to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $84.12
FORTHCOMING
Malekko Varigate 4+ Module (black faceplate)
Cat: 766093
 
sequencer module
Notes: The Varigate 4+ is a 4-channel, 8-step sequencer that includes most features of the original Varigate 4, PLUS the new option to output both CV (quantized or unquantized) and gates simultaneously. Other new features include a Play/Stop function, Preset Banks (4×4), Glide Per Step, Scales and can also be configured as master for the Malekko Voltage Block as well as a slave to the Varigate 8+ if you're looking to expand your total channels and presets (up to 14 channels and 100 presets with V8+).

Each Channel (or Track) correlates with it's own sequencer (so 4 independent sequencers). The addition of the Gate/CV Switch allows for switching between 4 channels of CV, 2/2 for 2 channels of CV and 2 channels of gates, or all 4 channels to output only gates. Additionally, each step of a sequencer can be programmed with Probability for gates, Repeats, Glide and Notes (when in a CV mode). There is a also a Randomization feature for Repeats, Notes and Glide. Channel parameters for Scales, Sequence Direction (Forward, Reverse, Pendulum and Random), Sequence Length, Division, Multiplication and Pulsewidth are all easily accessible using Track Mode.

Easy Preset Recall makes the Varigate 4+ perfect for live performance. Pair it with the Malekko Voltage Block for maximum control.
Read more
MRP:$317.83 SAVE 17%
coming soon $264.86
FORTHCOMING
Qu Bit Aurora Spectral Reverb Module
Cat: 766024
 
reverb module
Notes: Aurora is a spectral reverb with true stereo IO. It features a lush reverb algorithm, and a phase vocoder audio engine allowing for spectral transformations of the incoming sound. You can freeze the input signal in the time or frequency domain with the press of a button or gate input. In addition, the reverb time extends all the way to infinity at its highest setting. The Aurora feels right at home on an effects send or in the middle of a voice as a creative sound design tool.
Read more
MRP:$372.67 SAVE 17%
coming soon $310.57
FORTHCOMING
ReMix Collection 25th Anniversary Limited Edition Box
Cat: 779581
 
6x12" record box + art prints
Notes: Limited Edition BOX to house 6 x Vinyl plus 6 individual prints for The ReMix Collection Series.

Please note there is no vinyl included in this boxset, only 6x12" art prints.
Read more
coming soon TBA
FORTHCOMING
Soma Laboratory Pulsar-23 Organismic Drum Machine (black)
Cat: 781129 Rel: 31 Dec 20
 
analog synthesiser/drum machine
Notes: Pulsar-23 is a multi-functional analog synthesizer and generator of complex rhythmic patterns.

The Pulsar consists of 23 different modules, including four flexible sound generators with completely different structures, four envelope generators, four looper-recorders, a clock generator with dividers, a controlled chaos generator, an LFO, a two-channel CV-controlled effects processor, distortion, two controlled amplifiers, an inverter, a controlled inverter and two controlled analog switches. In addition to these 23 main units, the Pulsar also contains 13 auxiliary units, such as a four-channel MIDI to CV converter, a noise generator, four attenuators, two dynamic CV generators with sensory control, two impulse converters and single passive electronic components for live circuit bending.

Pulsar-23 can be used for the synthesis of percussion instruments and rhythms, bass and melodic lines, effects and sound landscapes, as well as a source of control voltage. The Pulsar functions in three different modes: stand-alone, MIDI control and CV control. Moreover, all the above features and control modes can work simultaneously in any proportion or combination. Additionally, Pulsar offers live circuit bending capabilities and the use of the artist's body conductivity to create patches and cross modulations.

Pulsar continues the line of organismic synthesizers begun by LYRA-8, but now in the area of percussion instruments.

Also, it has MIDI control and synchronization and a lot of smaller modules such as 4 assignable attenuators and 2 dynamic CV sensors for CV generation etc. In general, there are 55 knobs, 11 switches and over 100 inputs and outputs for patching, Eurorack integration, external mixing and processing, live circuit bending!

It comes in a special HQ bag with 30 alligator clips cables and PSU.
Read more
MRP:$1,994.24 SAVE 17%
coming soon $1,661.86
FORTHCOMING
Modal Electronics ARGON8X 8 Voice 61 Key Polyphonic Wavetable Keyboard Synthesiser
Cat: 763203
 
wavetable keyboard synthesier
Notes: The Argon8X features an identical sound engine and feature set, but rather than a 37-note keybed, you get 61 keys for an even more immersive playing experience. Mind-bending functionality and near-infinite tonal possibilities meets an attractive price tag; Modal have once again raised the bar in the desktop synth category.
Read more
MRP:$808.91 SAVE 17%
coming soon $674.09
FORTHCOMING
Doepfer A-130-8 Octal Linear VCA Module
Cat: 765896 Rel: 31 Jul 20
 
linear VCA module
Notes: Module A-130-8 contains eight linear voltage controlled amplifiers (VCAs). Each VCA features a control voltage input (CV), a signal input (In) and a signal output (Out). In addition three mixers are included: the socket labelled "1-4" outputs the sum of the VCAs 1-4, the socket labelled "5-8" outputs the sum of the VCAs 5-8, the socket labelled "1-8" outputs the sum of all eight VCAs.

The signal inputs are able to process levels up to 10Vpp without clipping. Each CV input is equipped with a trimming potentiometer that is used to adjust the sensitivity of the CV input in question. In the factory the module is adjusted for the CV range 1...+5V but can be re-adjusted by the user for other control voltage ranges (e.g. 0...+10V).

The amplification range for each single VCA is 0...1. The signals of the sum outputs have a lower amplification to avoid distortion.

The VCAs and mixers are fully DC coupled, i.e. the module can be used for the processing of both audio and control voltage signals. The control voltage and signal inputs can be normalled by means of small solder pads (e.g. 1 > 2 > 3 > 4 and so on, or 1 > 5, 2 > 6, 3 > 7, 4 > 8 for the stereo application mentioned below).

Typical applications:
any kind of VCA application (e.g. voltage controlled attenuation of audio or control voltage signals)
two voltage controlled mixers with four channels each
voltage controlled stereo mixer with four channels each, for this the control voltage inputs have to be correspondingly patched or internally normalled: CV1=CV5 /CV 2=CV6 / CV3=CV7 / CV4=CV8
voltage controlled mixer with eight channels
add-on for the planned Joystick module A-174-4

HP : 6
Read more
MRP:$100.96 SAVE 17%
coming soon $84.12
FORTHCOMING
Behringer 112 Dual VCO Module
Cat: 780465 Rel: 27 Jul 20
 
analog dual VCO module
Notes: Eurorack module; two identical analog VCOs in one module.

Selectable waveforms: triangle, sawtooth and squarewave/pulse; adjustable pulsewidth and PWM CV input with attenuator; octave-switch and fine-tune control knob; hard and soft sync; 3 pitch CV inputs with attenuators;

Power consumption: 130mA (+12V) / 70mA (-12V); width: 16 HP; depth: 46mm
Read more
coming soon $103.86
FORTHCOMING
Qu Bit Cascade Ratcheting Envelope Generator Module
Cat: 766031
 
envelope generator module
Notes: Cascade is a ratcheting envelope generator featuring burst generation, a flexible curve parameter, and two discrete level controls. Freeze allows you to lock the output voltage exactly where it is with the press of a button or a gate input. The Cascade can be transformed into several other modes, including ASR, ADSR, dual AD, and a gravity-based bouncy-ball mode.
Read more
MRP:$248.03 SAVE 17%
coming soon $206.69
FORTHCOMING
Qu Bit Data Bender Circuit Bent Audio Buffer Module
Cat: 766026
 
audio buffer module
Notes: Data Bender is a circuit bent digital audio buffer. It is inspired by the ways in which audio equipment can fail. The sounds of skipping CDs, software bugs, and defective tape machine playback are all accessible. The audio buffer can hold up to five minutes of stereo audio, providing a sonic canvas capable of infinite surprises and discovery.
Read more
MRP:$434.99 SAVE 17%
coming soon $362.49
FORTHCOMING
Doepfer A-174-4 3D Joystick Module
Cat: 765892 Rel: 31 Jul 20
 
control voltage module
Notes: Module A-174-4 modules outputs three control voltages generated by a spring-loaded X/Y cross potentiometer (so-called joy stick) and a Gate signal. The control voltages for X and Y are controlled by the X and Y position of the joystick in the usual way. The third control voltage Z is controlled by the rotation of the spring-loaded joystick knob. The Gate signal is generated by a button at the center/top of the joystick knob.

For each control voltage the non-inverted signal (X, Y, Z) as well as the inverted signal with adjustable offset (-X+XO, -Y+YO, -Z+ZO) are available. The generic joystick control voltages are bipolar, i.e. they range from typ. -5V (lowest position) via 0V (center position) to typ. +5V (highest position). The "Overlap" switches can be used to add a fixed offset voltage of typ. +5V to the non-inverting output in question so that the output voltage range changes to typ. 0...+10V (rather than -5...+5V). That's necessary if e.g. a VCA has to be controlled, which requires a pure positive control voltage range. The switches are named "overlap" because they allow the overlapping of the non-inverting CV output (X, Y, Z) with the inverting output (-X+XO, -Y+YO, -Z+ZO) for crossfading applications. With the overlap switch "on" and appropriate setting of the offset control it's possible to obtain a control voltage range of 0...+10V for the non-inverting output and +10V...0V (i.e. same range but opposite direction) for the inverting output.

The offset voltages which are added to the inverting outputs can be adjusted by means of three small potentiometers. That way different kinds of control voltage ranges are possible, e.g.
-5V ... +5V for the non-inverting output and +5V ... -5V for the inverting output ( Overlap = off, Offset = 0)
0 ... +10V for the non-inverting output and +10V ... 0V for the inverting output ( Overlap = on, Offset = max)
-5V ... +5V for the non-inverting output and +10V ... 0V for the inverting output ( Overlap = off, Offset = max)
0 ... +10V for the non-inverting output and +5V ... -5V for the inverting output ( Overlap = on, Offset = 0)
On top of this the four quadrant voltages Q1, Q2, Q3 and Q4 are available. A quadrant voltage becomes positive when the joystick is positioned in the quadrant in question.
Each CV output is equipped with an LED that displays the present voltage.

Because of the construction height of the joystick (about 7 cm) the module cannot be installed into the cases A-100P6, A-100P9, A-100PMS6, A-100PMS9 and A-100PMS12 during transportation as the depth of the case cover is not sufficient. Into the base cases A-100PB and A-100PMB as well as in all other cases without cover the module can be installed without problems.

HP : 12
Read more
coming soon TBA
FORTHCOMING
Pittsburgh Modular Lifeforms SV-1B Eurorack Analog Synthesiser Module
Cat: 782211 Rel: 25 Sep 20
 
Eurorack analog synthesiser module
Notes: The original Lifeforms SV-1 eurorack format synthesizer module is legendary for its deep, analog sounds capable of pumping out everything from roaring bass and cutting leads to absolute chaos. The SV-1b shares this same bold, powerful core while fine tuning the details. We have made a countless number of small tweaks and adjustments to the original SV-1 synthesis engine to improve the stability and functionality of the SV-1b. The sound is what matters, and this is still the East Coast analog monster to beat.

From the custom designed oscillator core to the iconic sound of the Pittsburgh Filter, the SV-1b showcases the true power of analog synthesis. The oscillator core used in the SV-1b was developed by Michael Johnsen and Richard Nicol to pair the visceral size and depth of vintage oscillators with the tracking and stability needed by modern instruments. The result is a palate of waveforms tuned to perfection with proprietary analog designs and countless listening tests. The Pittsburgh Filter is the heart of the SV-1b. The first collaboration between Michael and Richard, it defines the sound of Pittsburgh. Buttery smooth, the filter adds a depth and weight to waveforms so it never sounds dull. Michael's liquid resonance circuit allows the Pittsburgh Filter to overdrive smoothly and never lose the bottom end regardless of how high you turn up the resonance. Everywhere is a sweet spot.

The SV-1b is not a semi-modular synthesizer with limited signal path options. Each module within the SV-1b can be used independently to the rest of the system. The SV-1b is pre-patched (normaled) internally so patch cables are not necessary to get started. But as soon as you begin patching, you will appreciate the unrestricted creativity of the 53 patch points and 21 knobs. By breaking each module of the SV-1b out with patch cables, a tremendous amount of flexibility and control emerges to patch up any sound your imagination can dream up.

The MIDI to CV converter enables you to connect all your MIDI-compatible gear and convert it to control voltage right inside the SV-1b. Volt per octave, gate, CC, and velocity outputs allow you to connect to your MIDI keyboard or DAW while a digital LFO with sine, triangle, square, and quantized random voltage waveforms provides clock sync'd modulation options. A clock input allows you to override the internal or MIDI clock and sync to external CV and gate clock signals. The built-in arpeggiator unlocks another level of playability and the capacity to create complex and fresh musical patterns out of just a few notes.

The custom core, dual analog oscillators provide the sonic framework for massive synth sounds and a deep exploration of east coast synthesis. Sine, triangle, saw, and square waves are at your control, all available to modulate via FM and hard sync. Oscillator One also contains our unique blade wave. The shifting saw-like shape of the blade wave can be controlled using the width CV input, creating a sweeping or chorusing effect. Oscillator Two is normaled to the FM of Oscillator One, providing jaw-dropping analog FM bass, deep percussive hits, searing leads, and thick, warm analog pads which all come to life from these two Pittsburgh designed, organic sounding oscillators. Both analog oscillators dip well below audio rate, allowing them to function as voltage controllable LFOs.

A utility LFO with triangle and square wave outputs is ideal for VCA or Filter frequency sweeps. Or, turn it up and release the dynamic FM capabilities of either oscillator. A Tools section provides access to two sub-octave oscillators, derived from Oscillator One's core frequency. Analog noise and sample & hold finish out the Tools section.

This versatile four channel mixer comes pre-wired for fast access to Oscillator One's sine, saw, pulse and sub. However, you are just a patch cable away from instantly making your own unique blend of waveforms from the SV-1b. The mixer can also be split into two independent two channel mixers for maximum patching flexibility.

Smooth and thick, the sound of the revered Pittsburgh Modular Filter is unmistakable. Stunning harmonic character with voltage control over the entire frequency range. A provided attenuverter lets you dial in exactly how much CV to feed the frequency input, even inverting the input for dramatic changes in modulation. Separate highpass, lowpass, and bandpass outputs are provided as breakout options, each with their own powerful sonic timbres. Turn up the resonance for an added growl, giving your tones an aggressive edge that no softsynth can match.

Panel size: 48hp
Depth: 35mm
Power Usage: +12v 230mA, -12v 200mA. Does not require +5v. Includes reversed power polarity protection.
Read more
MRP:$710.45 SAVE 17%
coming soon $592.03
FORTHCOMING
Behringer 921B VCO Module
Behringer 921B VCO Module (oscillator module)
Cat: 780467 Rel: 27 Jul 20
 
VCO module
Notes: Enter the Behringer 921B OSCILLATOR. An authentic reproduction of the circuitry from the "Modular 55 and 35" series oscillators used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 921B OSCILLATOR module is controlled by the Behringer 921A OSCILLATOR DRIVER or can be used as a free-running LFO. Separate Frequency and Range knobs allow you to adjust the frequency range in semitones and in octaves. The 921B along with the 921A modules form the foundation of a proper modular synthesizer and the basis for some really great music.

The 921B OSCILLATOR features independent audio outs for each of the 4 waveforms which include sine, triangular, sawtooth and rectangular which can be patched out to different modules to unlock even more creative possibilities. A dedicated oscillator sync input and switch can be used to sync the 921B to a signal introduced into the Sync In jack. Parallel link jacks allow the 921B to link to other 921B in the chain.

Installing the 921B OSICLLATOR is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 921B OSICLLATOR to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $103.86
FORTHCOMING
Behringer 3 Tier Eurorack Module Stand Case
Cat: 780468 Rel: 27 Jul 20
 
module stand case
Notes: Behringer Eurorack Stand 3-Tier; desktop stand for mounting up to 3 Eurorack 104 cases (item 463669), or 3 Behringer synthesizers (e.g. Pro-1, Wasp Deluxe, K-2, Neutron, Model D, Cat).

Variable width (70 HP, 80 HHP or 104 HP); rugged aluminum/steel construction.
Read more
coming soon $65.42
FORTHCOMING
Behringer 173 Quad Gate/Multiples Module
Cat: 772876
 
quad gate & multiples module
Notes: This is the Behringer SYSTEM 100 173 QUAD GATE/MULTIPLES. An authentic reproduction of the original System 100M circuitry from the 80s that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the 173 QUAD GATE/MULTIPLES in with your existing rig to expand its capabilities and you're sure to have a lot of fun.

The SYSTEM 100 173 QUAD GATE/MULTIPLES Module features 4 signal gates (switches) with buffered audio inputs and outputs for immediate signal switching. This provides users the option to choose between a control gate operation, non-inverting (active high) input or an inverting (active low) input.

6-channel multiples, each with 4 floating parallel connectors, are available for optimal signal integrity. You can now send out your signal to other modules to help you create more intricate patches and deliver more compelling sounds from one source.

Installing the SYSTEM 100 173 QUAD GATE/MULTIPLES is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the SYSTEM 100 173 QUAD GATE/MULTIPLES to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $87.25
FORTHCOMING
Malekko Quad LFO Module (black faceplate)
Cat: 766096
 
LFO module
Notes: An LFO, or low frequency oscillator, sends control voltage out in the shape of a waveform. The Quad LFO available shapes include sine, ramp, saw, triangle and pulse and moves through these shapes using the SHAPE slider. You can send these 4 distinct LFOs directly out or to other modules for frequency modulation, VCA control, filter control, etc.

What makes this Quad LFO module different is that it also includes a 16 step automation sequencer for each channel, as well as autosave or expanded preset functions when used in conjunction with Varigate 4+ and Varigate 8+.

Multiple Quad LFOs can be controlled by one Varigate 8+ or Varigate 4+ on the same bus to instantly save/recall presets.

To create a sequence of automation for an LFO, select a channel and then hold the RECORD button and move the sliders for Frequency, Phase, Shape, Distort and Level and those slider movements will play back automatically as the Quad LFO cycles through the sequence. This sequencing feature allows for a multitude of dynamic possibilities for live performance and recording.

Set each LFO to trigger via one of the 4 individual gate inputs, or set channels 2 through 4 to follow channel 1 for quadrature and phase modulation. Change the direction of each channel of sequenced automation to Forward, Reverse, Pendulum or Random. Switch the playback speed and style between Fast, Slow or Tempo Sync. There are also inputs for both Clock and Reset.


Read more
MRP:$342.76 SAVE 17%
coming soon $285.64
FORTHCOMING
Behringer 903A Random Signal Generator
Cat: 772802
 
signal generator
Notes: Enter the Behringer 903A RANDOM SIGNAL GENERATOR Module, a vintage-sounding noise generator from the '70s. An authentic reproduction of the circuitry from the "Modular 55" series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

Enter the Behringer 903A RANDOM SIGNAL GENERATOR Module, a vintage-sounding noise generator from the '70s. An authentic reproduction of the circuitry from the Modular 55 series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 903A RANDOM SIGNAL GENERATOR generates both white and pink noise via two 3.5 mm outputs each allowing you to send different signals to other modules in your rig.

Installing the 903A RANDOM SIGNAL GENERATOR is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 903A RANDOM SIGNAL GENERATOR to be mixed with other synth modules for a truly unique set up.

Read more
coming soon $54.01
FORTHCOMING
Doepfer A-133-2 Dual Voltage Controlled VCA/Polarizer/Inverter/Ring Modulator Module
Cat: 765897 Rel: 31 Jul 20
 
VCA/polarizer/inverter/ring modulator module
Notes: A-133-2 is the slim version of the A-133 but has some additional features and improvements available compared to the A-133.

Module A-133-2 can be used for a lot of applications: as a simple VCA, or a voltage controlled polarizer/attuverter, or a voltage controlled inverter up to a DC coupled ring modulator. In principle the module contains two special voltage controlled amplifiers (VCAs) that allow both positive and negative amplification.

The overall amplification is definded by the sum of the voltage generated by the Man control, the external control voltage CV and the position of the CV control which works as an attenuator for the external control voltage. Without external CV the amplification is +1 when the Man control is fully CW. In the center position the amplification is zero and fully CCW it's -1 (i.e. the incoming signal is inverted). By means of the external control voltage CV the manually adjusted amplification can be modulated. CV can be both positive or negative (i.e. bipolar) to obtain positive or negative amplification values controlled by the external CV.

In addition the CV signal can be modulated via the modulation control input Mod by means of another control voltage. The Mod socket is normalled to +5V, i.e. a constant positive voltage is used as modulation CV provided that no plug is inserted into the Mod socket.

The current amplification is displayed by a dual color LED (note: it's not a signal display but indicates the amplification, probably yellow = positive amplification, red = negative amplification)
Application examples:
voltage controlled amplifier (VCA) with pure positive overall amplification (Man + CV)
voltage controlled inverter with pure negative overall amplification (Man + CV)
voltage controlled polarizer/attuverter overall amplification changing between positive and negative (Man + CV)
DC coupled ring modulator with offset feature, the "classical" ring modulator corresponds to Man=0 and symmetrical audio signals for In and CV
additional effects by means of the modulation feature of the CV signal (using the Mod input)
Read more
MRP:$100.96 SAVE 17%
coming soon $84.12
FORTHCOMING
2hp Loop Module (silver faceplate)
2hp
Cat: 766646
 
sound looper module
Notes: Sound on sound looper with 5 minute audio buffer.

Audio specs: 48kHz, 24 bit.
Read more
MRP:$172.00 SAVE 17%
coming soon $143.34
FORTHCOMING
2hp Comp Module (silver faceplate)
2hp
Cat: 766648
 
compressor module
Notes: Compressor with side chain functionality.
Read more
MRP:$153.31 SAVE 17%
coming soon $127.74
FORTHCOMING
WMD SCLPL Stereo 5-Band Digital EQ & Morphing Filter Module
Cat: 776823 Rel: 31 Aug 20
 
filter module
Notes: SCLPL (pronounced SCALPEL) is a Stereo 5-Band Digital EQ / Morphing Filter module for eurorack modular synthesizers. Use it to cut out problem frequencies on voices in your mix or to add pleasing enhancements to your stereo field.

Dual Mono and Stereo Control Schemes make it an excellent addition to any WMD Performance Mixer Setup. Add 4 SCLPL for 8 channels of EQ in 16HP. Put a 5th on the Master Bus and you have the ultimate eurorack mixing setup!

A simple user interface makes it a powerful tool for many use cases. It features 9 user-programmable preset slots that can then be "morphed" between seamlessly with CV or the Level knob in Morph Mode.

Each frequency band is set independently with the Level, Q, and Frequency knobs, and a helpful LED display aids in knowing exactly what's going on at all times.

Frequency bands include a Low Shelf, 3 Mid-Range Peaking Bands, and a High Shelf.
Read more
coming soon $246.15
FORTHCOMING
Tangerine Dream: Itinerary: The Concert Memorabilia 1970-2014
Cat: 779750 Rel: 10 Jul 20
 
10x12" memorabilia collection in coffee-table book format
Notes: This complex work is a painstakingly detailed and incredibly massive exhibit of Tangerine Dream's paper past. Presented in a 10x12" (ca. 25x30 cm) coffee-table book format - specifically designed to sit beside Edgar's Force Majeure autobiography perfectly, "Itinerary" has a scope of about 452 pages, and contains over 1,100 images of TD's posters, flyers, tickets, passes, programs, invitations, contracts, stage plots, spreadsheets, memos, itineraries, telexes, receipts, press releases, etc. - all of which has been described by one of the world's leading collectors of music memorabilia to be "the most astonishing collection of memorabilia by one band" he's ever seen.
Read more
coming soon TBA
FORTHCOMING
Behringer 923 Filters Module
Behringer 923 Filters Module (eurorack module)
Cat: 772935
 
filters module
Notes: Enter the Behringer 923 FILTERS. An authentic reproduction of the circuitry from the Modular 35 and 15 series filters used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 923 features separate Low and High Pass filters each with their own dedicated frequency cutoff controls. The Low Pass filter control will roll off all frequencies above the set threshold frequency from 10Hz to 10KHz while the High Pass filter control will roll off frequencies below the set frequency. Each filter comes with their own 3.5 mm ins and outs giving you the ability to route incoming signals through the IN jack, through the filter and back out the OUT jack.

For you to shape an endless number of tones, the 923 comes with a white and pink noise generator. Use the parallel jacks for each of the noise sources to send out a white or pink noise signal and start sweeping frequencies to build tension and excitement in your songs, or use them to create some percussive sounds for a real groovy drum beat.

Installing the 923 is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 923 to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $83.10
FORTHCOMING
Behringer 961 Interface Module
Cat: 772932
 
interface module
Notes: Enter the Behringer 961 INTERFACE Module. An authentic reproduction of the circuitry from the Modular 55 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 961 features an audio to V-Trig Converter, allowing you to plug in any audio source and transform it into a voltage trigger to drive other modules in your rig. Dual S-Trig to V-Trig and a multichannel V-Trig to S-Trig converters on the 961 can be utilized to switch or control a particular function on other modules.

Controls on the 961 include a Sensitivity knob that adjusts the gain of the audio signal coming into the module via the Audio In jack. Column B in each V-Trig In bank has a Switch-On Time knob you can use to manually control how short or long the "ON" duration is for S-Trig signals. This feature is normally used to drive the 911 envelope generator. Add a 960 sequential controller to release the full creative potential of this interface module.

Installing the 961 INTERFACE is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 961 INTERFACE to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $83.10
FORTHCOMING
Behringer Eurorack Rack
Behringer Eurorack Rack (19" Eurorack rack mount)
Cat: 780464 Rel: 27 Jul 20
 
rack-mount kit with power supply
Notes: The EURORACK RACK is ideal for any Behringer Eurorack-style synthesizer or equipment. This desktop/rack-mount kit converts a 19" rack into an 84 HP Eurorack chassis. A compact 4 HP power supply with two flying bus boards are included together with a 3A universal power adapter. 52 sliding nuts allow you to easily position your modules so you can freely position your synth wherever you need it.
Read more
coming soon TBA
FORTHCOMING
2hp Loop Module (black faceplate)
2hp
Cat: 766647
 
loop module
Notes: Sound on sound looper with 5 minute audio buffer.

Audio specs: 48kHz, 24 bit.
Read more
MRP:$172.00 SAVE 17%
coming soon $143.34
FORTHCOMING
ADDAC System ADDAC215 Dual S&H+ Module (black faceplate)
Cat: 776254
 
dual sample & holds module
Notes: This new module should not be judged by it's size, at 6hp it's packed with features.

At its core it features a noise source and two precision Sample & Holds with 0.01% of maximum deviation from the Input which allows for quantized signals to be sent through without any noticeable detuning or the typical voltage drops over time.

The Sample & Hold sections can also be used as a Track & Hold meaning it holds the incoming input while the Trigger input is ON and lets the input flow to the output when the Trigger input is OFF.
Each section also features it's own slew processor with a single control over attack and decay and an ON/OFF switch.

The noise signal is normalled to both sections inputs, meaning that without a jack plugged into the Input the sample and hold function will act upon the incoming noise signal generating random CV values.

The [Trigger A Alternate] switch allows to Link both sections so that any trigger input in Trigger A will alternate between triggering the A and B section.

Besides each section outputs there's also 4 extra outputs: Noise, Difference, Average and Sum. The Noise output is coming from the noise source, the Difference output is the subtraction of section A minus section B, the Average output is the sum of both A plus B and then divided by 2 and finally the Sum output is the sum of both A plus B sections.

MECHANICAL:
Format: Eurorack
Width: 6 HP
Depth: 4 cm

ELECTRICAL:
Max current: +50mA/-50mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$134.61
coming soon $129.83
FORTHCOMING
EMW WCS-1 Wave Composition Analog Synthesizer
Cat: 775808
 
analog synthesiser
Notes: The WCS-1 is a MIDI synthesizer module that utilizes a digital oscillator followed by all discrete analog circuits in order to produce unusual and 'fat' sounds.The exclusive wave addition resource together witha dual input.

A powerful VCF and a lightning fast VCA makes for powerful sound generation capabilities- an ideal instrument for electronic music perfection.

To make use of the WCS-1, you need a MIDI controller keyboard or anthing else with a MIDI OUT port e.g. MIDI pad controllers, bass pedals, or a computer with a MIDI connection.

The WCS-1 has a 1/4" (P-10) mono jack on the back panel in order to be connected to a sound mixer, computer audio interface, or directly to an amplifier.
Read more
MRP:$352.73 SAVE 20%
coming soon $281.47
FORTHCOMING
Korg SoundLink MW2408 Hybrid Analogue & Digital Mixer
Cat: 762144
 
hyrbid analogue & digital mixer
Notes: A mixer should not only sound good. It should be very easy to use.

Korg has collaborated with the legendary mixer design team of Greg Mackie and Peter Watts to create hybrid/analog mixing consoles that make creative mixing easy. Both the 24- and 16-channel models give you instant analog control for live mixing with stunning sound quality and more musician-friendly features than the competition - paired with the power of high-quality digital where it counts.

Use a SoundLink and you discover all the typical Greg Mackie features that are unique to SoundLInk; hear your first live mix and discover why Peter Watts helped design legendary Trident consoles and then hundreds of high-end studio processors and preamps. Besides designing mixers, Greg Mackie has been mixing on them for over 40 years.

When you listen to the "White Album", Rhianna's "Rated R" and "Loud", "Goodbye Yellow Brick Road" and literally hundreds of other familiar albums, you're listening to the legendary Trident mixing console sound. Peter Watts had an important role in Trident technology; he brings the same rich, warm preamp, EQ and dynamics quality to the products he designs today. HiVolt mic preamps give you the most headroom of any comparably-priced analog or digital mixer (16.5V internal voltage, even on stereo channels where other mixers skimp). They sound warm and musical.

It is the only small mixer that has Mute Groups. They let you instantly call up different combinations of channels for various groups on stage, different songs, sound checks, a solo acoustic number, a drum solo or different parts of a church service (choir, praise band, pastor. You get four Group options, each easily programmable and recallable.

Some musicians want to hear more of their own instrument or voice in their in-ear or floor monitor, a process that is complicated to change on other mixers. SoundLink's Musician's Phone feature provides one-knob boost of the complete left/right mix into the musician's individual track. Instead of having to change main mix settings or take up a bus, you have dedicated knobs for two musician's "more me" monitor mixes.

Instead of a generic digital effects processor chip, SoundLink mixers use a high-quality proprietary Korg custom chip that builds on all of Korg's multi-decade expertise: twenty four ultra-realistic digital effects. For example, all six reverb effects include an alternate "WARM" version- a touch veteran Korg users will tell you is very useful. Parameters of all effects can be tweaked, saved and recalled, and activated by an optional footswitch. Plus, you get test tone generators for use with the built-in 24-band Spectrum Analyzer that's another SoundLink exclusive in a mixer in this price range.

Digital processing and effects are frustrating if they're buried in some long, scrolling menu inside a menu. For EQ and other control features, and a row of individual L/R, AUX 1 and Aux 2 assign buttons for both Equalization and Dynamics makes mixing easier. SoundLink's Limiter, Compressor, Noise Gate are both effective without being harsh or exaggerated. Each has tweakable, recallable parameters. Coupled with a 31-band Spectrum Analyzer, our super-practical 31-band/9-band ParaGraphic EQ solves acoustical problems other small mixers can't handle.
Read more
MRP:$1,494.43 SAVE 17%
coming soon $1,245.37
FORTHCOMING
Behringer SL 75C Cardioid Microphone
Cat: 772872
 
cardoid microphone
Notes: This professional-quality microphone is designed to capture the sounds with outstanding sensitivity and accuracy. With a Cardioid pickup pattern for excellent sound source separation and feedback rejection, this ultra-wide frequency response mics is an excellent choice for any performing or recording scenario - and it's rugged enough to go the distance. SL 75C is coming with integrated shock mount system, a mic stand adapter and an impact-resistant carrying case, the SL 75C is the only microphone you will ever need.

Dynamic mics have several advantages that make them ideal for live vocal applications and for recording amplified instruments. They're robust, resistant to moisture and can achieve high gain before feedback. The SL Series' Cardioid pickup pattern captures the source signal, such as a guitar amplifier or vocalist, while shunning off-axis sound. And best of all, dynamic microphones don't require any phantom power, so all you need is your mic and cable.

The SL 75C provides an amazingly flat frequency response while incorporating a smooth mid-frequency presence rise for excellent voice projection while minimizing noises. It features an extremely high output to get your voice out there! With their tough metal construction, you can count on the SL mics to come through after countless gigs and studio applications. We've even included a rugged hard case with a mic clip and stand adapter.

The SL 75C is built to be your go-to dynamic mics for years to come. It's high-quality components and extremely rugged construction can withstand the rigors of the bar circuit with ease. And with the included mic stand adapter and carrying case, the SL 75C travels along with all you need in style.
Read more
coming soon $17.65
FORTHCOMING
Behringer 960 Sequential Controller
Cat: 781518 Rel: 27 Jul 20
 
controller module
Notes: An authentic reproduction of the circuitry from the Modular 55 series used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard EURORACK case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.
Read more
coming soon $136.06
FORTHCOMING
2hp Pitch Module (silver faceplate)
2hp
Cat: 766651
 
pitch module
Notes: Time domain pitch shifter with flutter control.
Read more
MRP:$137.10 SAVE 17%
coming soon $114.26
FORTHCOMING
EMW Spectral Viewer Module (black faceplate)
Cat: 775790
 
spectral viewer module
Notes: The EMW SPECTRAL VIEWER module splits the audio frequency band and translates the individual bands into intensity color levels in a way that red represents low frequencies, green represents the mid frequencies and blue the high frequencies. A full audio material fed into the module will be translated into a dynamically multi-color visualization of the audio spectrum.

The EMW SPECTRAL VIEWER will add an extra dimension, with sound-activated dynamic colors to your modular.

Eurorack (3U) form factor - 12HP width

Connectors: 3.5mm

Depth: 50mm
Read more
MRP:$168.26 SAVE 19%
coming soon $136.07
FORTHCOMING
ADDAC System ADDAC604 Dual Filter Module (black faceplate)
Cat: 776353
 
dual filter module
Notes: While developing the ADDAC105 4 Voice Cluster module, a new multimode filter to place after the summing mix stage- and the results were so postitive that it was released as a dedicated filter.

To make it more interesting, the circuitry was duplicated, to be able to use it in a stereo signal path.

To make it more versatile, a switch was added to set the working mode from Stereo to Dual Mono where both filters can be used independently.

In Stereo Mode the Left Cutoff is used to control the Right Cutoff.
In this case the Right Cutoff Knob and CV Input are simply bypassed and will have no impact on the Right Channel operation.
This allows immediate sync of both filter frequencies when the Stereo position is engaged.
Optionally there's a jumper in it's back that, when placed, connects the Right Controls back to the Right CV control allowing the possibility to control the offset of the Right Channel Cutoff.

Resonance is independent on both Modes and still has to be set manually to match both channels.

Both the Audio and CV inputs are normalled from the Left into the Right channels.
As standard plugging any input to the Right channels removes this connection.

Tech Specs:
6HP
4 cm deep
70mA +12V
70mA -12V
Read more
MRP:$193.19
coming soon $186.95
FORTHCOMING
EMW 200 Desktop Synthesiser
Cat: 775814
 
desktop synthesiser
Notes: The EML-200 recreation is an old idea that has been in the works for 12 years, and several approaches and circuits have been tested during this time. The first attempt was to create a similar synth that resembles the 200 but with several different modules and circuits.

In 2011, with the growth of the EMW initiative and a few years without focusing on the project, it was embraced again, but now with no more surprises.

The raw and powerful vibration that represents the heart and the root of the analog sound, particualrly from the EML-200 and EML-300, was a key inspiration when creating the EMW-200 and EMW-300.
Read more
MRP:$2,233.55 SAVE 19%
coming soon $1,816.63
FORTHCOMING
Behringer 994 Multiples Module
Cat: 772832
 
multiples module
Notes: Enter the Behringer 994 MULTIPLES Module. An authentic reproduction of the circuitry from the Modular 55 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The dual 4-socket multiples of the 994 MUTLIPLES allows you to split CV or audio signals to multiple destinations. Now, one signal can control several modules.

Installing the 994 MULTIPLES is simple as it was designed to fit into a standard Eurorack case. This allows for the 994 MULTIPLES to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $33.23
FORTHCOMING
Befaco CV Thing Voltage Controlled MIDI Controller Module
Cat: 775217 Rel: 31 Jul 20
 
MIDI controller module
Notes: A 6 HP version of the VCMC module. Simpler, less connectivity but all the flexibility and power from VCMC.

It's the exact same concept as the VCMC in that you pump in CV and control MIDI gear or your DAW and software instruments but in a much smaller package. The faders and buttons have been droppws and just give you 8 CV inputs, a big white knob and that rather nice little screen. The MIDI connections are taken care of by a TRS socket and USB for direct connection to a computer.

Essentially, you've lost the manual controls over MIDI gear that the faders and buttons provided and are just going straight with triggers, notes or modulation.

Each of the 8 CV inputs can be mapped to any MIDI message or controller number, note or event. You can send clock, program changes, note on/off and everything you'd expect in MIDI. It's a pretty great way of connecting your modular to your external instruments or software while keeping the control in the Eurorack rather than ceding control to the DAW. And if you prefer things the other way around then Befaco also makes a MIDI Thing MIDI-to-CV interface.
Read more
MRP:$320.32 SAVE 17%
coming soon $266.93
FORTHCOMING
ADDAC System ADDAC200PI Pedal Integrator Module (red faceplate)
Cat: 776156
 
pedal integrator module
Notes: This small utility is the pedal's lover best friend, it allows 2 diferent chains of pedals to be independently connected to your synth.

The Send channels attenuate the synth level to instrument level.

The Return channels amplify the signal from instrument to synth level.

Specs:
. Width: 4 HP
. Depth: 3 cm
. Max current: 10mA
Read more
MRP:$95.97
coming soon $93.47
FORTHCOMING
Behringer 904B VC High Pass Filter Module
Cat: 772804
 
filter module
Notes: Enter the Behringer 904B VOTLAGE CONTROLLED HIGH PASS FILTER Module. A vintage-sounding authentic reproduction of the circuitry from the Modular 55 & 35 Series used by the world's most famous pop, rock and jazz musicians for their shows. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 904B VOLTAGE CONTROLLED HIGH PASS FILTER allows you to attenuate low frequencies and accentuate higher ones in a signal. With the Fixed Control Voltage knob, also known as a cutoff frequency, determines the frequencies attenuated below a certain point. Switch the Frequency Range between Low (4 Hz to 20 kHz) or High (10Hz to 50 kHz) to select what frequencies the Fixed Control Voltage affects. You can use the 904B to let you cut through a mix for some searing lead tones or pair it with the Behringer 904A VOLTAGE CONTRLLED LOW PASS FILTER and be prepared to hear some very interesting sounds.

Audio in and out connectors are available on the 904B that let you process an incoming signal before sending it to another module via a 3.5 mm TS cable. You can also use the Control Inputs to connect voltage signals from other modules to affect the cutoff frequency. Use this module to add distinct tweaks to your patches so you can create more unique sounds.

Installing the 904B VOLTAGE CONTROLLED HIGH PASS FILTER is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 904B VOLTAGE CONTROLLED HIGH PASS FILTER to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $103.86
FORTHCOMING
Presonus Quantum 2626 Thunderbolt 3 Audio & MIDI Interface (B-STOCK)
Cat: 777617
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


PreSonus Quantum 2626 is the fastest and best-sounding interface on the planet, thanks to the jaw-dropping speed of Thunderbolt 3, 8 front-mounted premium PreSonus XMAX analog mic preamps, and pristine ADA converters.

The PreSonus Quantum Thunderbolt Audio Interface is a 26x32 thunderbolt 2 ultra-low-latency audio interface. The Quantum Thunderbolt Audio Interface includes two combo mic/line/instrument inputs and six combo mic/line inputs, with each mic input featuring a digital-controlled XMAX preamp. The versatile design allows you to daisy-chain multiple units to expand your I/O up to 96 in and out connections. The PreSonus Quantum features a wide range of analog and digital connectivity making it one of the most comprehensive high-end interfaces on the market. The interface also operates up to 192kHz for ultra-high-definition mixing and recording.

With a barely measurable round-trip latency of less than 1 ms*, it's no wonder Sound on Sound magazine dubbed Quantum-series Thunderbolt audio interfaces the "fastest audio interfaces on the planet". Superb high-definition digital conversion and the ultra-transparent analog XMAX mic preamp design mean that your audio will always sound its bestiwhether you're recording with or without your favorite plug-ins engaged in real-time.

Every design decision during Quantum 2626 audio interface's engineering was made with one goal in mind: blazing-fast speed without any sonic compromise. The Quantum-series proprietary Thunderbolt driver was written from the ground up to deliver ultra-low-latency performance while maximizing efficiency. Cutting-edge 24-bit, 192 kHz converters with 115 dB of dynamic range and superior low-jitter clocking- coupled with our ultra-transparent, pure analog XMAX preamps- result in superb audio quality with the lowest round-trip latency of any audio interface available (< 1 ms).

Audiophile-grade digital converters, low-jitter clocking, and transparent preamps add up to a superior recording and listening experience. The Quantum 2626 audio interface operates at up to 192 kHz for ultra-high-definition mixing and recording. High-quality converters on every input and output provide 115 dB of dynamic range to capture complex musical harmonics smoothly and naturally with no audible distortion. And our lauded XMAX Class A analog microphone preamps deliver incredibly high headroom, deep lows, smooth highs, and a rich overall sound so you'll hear every breath, transient, and detail in your recordings.

Impressive speed combined with stunning sound quality means that the Quantum Thunderbolt audio interface is an ideal recording solution for any size of studio. Need more mic preamps? Connect the PreSonus DigiMax DP88 to your Quantum interface's ADAT/dual S/MUX ports. Once synced, the DigiMax DP88 preamps can be remotely controlled via Studio One or UC Surface. Want to insert your favorite gear? The Quantum 2626 features two direct preamp outputs with dedicated returns, so you can insert your favorite analog compressor and your favorite plug-ins with ease.

While compatible with any macOS or Windows recording application, the Quantum 2626 ships as a complete recording studio with Studio One Artist music production software included. Easy to learn, Studio One enables you to compose, record, and produce without getting distracted by the tools. Need a new loop or sample for your latest production? Studio One lets you shop, audition, and purchase new content right from your production environment- including powerful extensions for Studio One like the Presence XT Expansion packs and the PreSonus Channel Strip Collection.

Industry-leading speed and pristine audio quality combined with jaw-dropping expandability are the hallmarks of the Quantum interface design. Record and monitor from your favorite DAW with any plug-in engaged. Insert your favorite outboard analog gear with ease. Regardless of your studio's size, Quantum audio interfaces will streamline your recording process- you'll make better music, faster.
Read more
coming soon $491.23
Artículos del 1 al 50 de 712 en la página 1 de 15
1  2  3  ...  15  »

Filter

Coming Soon: Studio Equipment
Close