Guitar Footswitch Pedals

Notes: Get louder, get quieter, or get modulated with the Foot Controller FCV100. This versatile pedal from Behringer works equally well as a volume pedal or a modulation pedal.

The FCV100 can accommodate two mono or one stereo instrument via dual 1/4" Input jacks. By switching into Norm mode, the FCV100 is capable of controlling the volume of two individual instruments. In CV mode the FCV100 can control modulation and volume levels of other musical instruments by connecting Output 2 to the volume or modulation input of the instrument. In CV mode, when Output 2 is in use, Input/Output 1 can still be used for controlling the volume of another instrument, similar to Norm mode.

Once you have determined your hookup configuration, simply depress the pedal to increase sound, then rock back on your heel to decrease the sound. By turning the Min Vol control, you can determine the minimum volume you wish to achieve. You can power this pedal with a 12V DC Power adapter (not included) or a 9V battery.

Notes: The FS112BX Heavy-Duty 2-Button Footswitch is the ideal companion for our BX2000H amplifier. It is designed to perform as a remote activator/ deactivator for the onboard FX Loop and Mute functions.

Featuring a rugged metal case, the finest switching components and a generous 15' (4.5 m) cable, the FS112BX connects to the front panel of the amplifier for convenient, hands-free operation.

Notes: FSB106A:
The FSB106A Heavy-Duty 6-Button Footswitch is identical to the one that ships with our BUGERA TRIREC amplifiers. It is designed to perform as a remote switch for Channel selection, Boost, Reverb and FX Loop functions - plus doubles as a MIDI IN / THRU conduit for complete MIDI remote switching. LED indicators display the status of the amp.

Built Like a Tank:
Featuring a rugged metal case, the fi nest switching components and a generous 15' (4.5 m) cable, the FSB106A connects to the rear panel of the amplifi er for convenient, hands-free operation.

Notes: External footswitch. Accessory for Sidekick JR.

Use the XT footswitch to control the operation of the modulation section of the Sidekick JR independently. Engage or true bypass the modulation effect.

XT footswitch bypasses the onboard modulation operation assign toggle switch of the Sidekick JR.

Connect to the XT jack input of the pedal.

Passive operation - no power needed for the XT footswitch to operate properly - use standard TS instrument jacks / cable only.

XT footswitch function is not affected by the power-up bypass/engage preset function of the onboard footswitches of Sidekick JR.

Dimensions (W x L x H) : 54 x 51 x 49 mm
Weight 0.91 kg
Made in Greece

Notes: The FS3X provides increased functionality and convenient Hands-free™ control over UP/DOWN selection of Models, Mode changes, Loop selection, auto START/STOPS and arms auto record where applicable. Compact and portable its small foot-print takes very little space on stage or in your gig bag. Durable 3 button metal chassis construction. A 10' stereo TRS cable is included with each unit. Get the most out of your DigiTech products while performing or practicing.

General Specifications
INPUT

1 x 1/4"
CONSTRUCTION

3-button metal chassis

Notes: The Cntl Knob is an affordable, compact, easy-to-use pedal that delivers static remote control for devices with expression control jacks. It lets you set two preset values that represent two positions of a traditional expression pedal and toggle between them with its footswitch.

The pedal's EXP 1 Knob selects the first expression setting and the EXP 2 Knob the second. On both, fully CCW corresponds to the heel position while fully CW to the toe position. LEDs indicate which knob is active and can be powered by your pedalboard's power supply or an optional EHX's 9.6DC200mA PSU.

To maximize the Cntl Knob's compatibility with other products it's equipped with a TRS+/- Button that lets you match its expression polarity with the device being controlled. For extra convenience it comes equipped with a 6 foot TRS (Tip-Ring-Sleeve) cable.

Electro-Harmonix introduces the compact Cntl Knob which lets a player set two preset values that represent two positions of a traditional expression pedal and toggle between them with its footswitch.

The Cntl Knob's EXP 1 Knob selects the first expression setting and the EXP 2 Knob the second. On both, fully CCW corresponds to the heel position while fully CW to the toe position. A TRS+/- Button matches the expression polarity of the Cntl Knob to the product being controlled and ensures maximum compatibility with pedals by all makers. LEDs indicate which knob is active and can be powered by a player's pedalboard power supply or an optional EHX's 9.6DC200mA PSU.

The Cntl Knob (Control Knob) comes equipped with a 6 foot TRS (Tip-Ring-Sleeve) cable.

Notes: This is a special Footswitch that gives you quick and easy access to the PLUS Pedal's "WET only" mode.

Acting as a kill-switch for your instruments DRY signal (which is useful to have on your board anyway), it lets you build huge drones and then drop your instrument back into the mix with one click!.

The WET Only Footswitch serves as a remote foot-controller that bypasses the SPLIT & MIX toggle switch on the PLUS Pedal's side panel, thus letting you switch in and out of the WET Only mode on the fly.

This flexibility allows you to build up a rich layer of ambient sound effects and then quickly unmute your instrument and return to playing on top.

(Note: Switch for OUT 1 must be set to MIX in order to use footswitch.) When using the WET Only footswitch (plugged into "CLEAN OUT/FSW"), you can still access the DRY only signal through a special DRY OUT output built into the Footswitch itself.

Input: 1/4" TRS (Stereo) in from PLUS Pedal, TRS Cable is included
Output: 1/4" Mono Dry Out
Product Dimensions: WLH 58 x 66 x 46 mm (2.3 x 2.6 x 1.8 in)
Product Weight: 230 g (0.5 lbs)

Notes: The Nektar NP-2 universal foot switch pedal is solid, rugged and ideal for both studio and stage.

Rubber gripping keeps the pedal in place during performances and polarity switching ensures they work with any keyboard or electronic product, requiring a foot switch.

Notes: The Nektar NX-P expression pedal is solid, rugged and ideal for both studio and stage. Rubber gripping keeps it in place during performances and polarity switching ensures it works with almost any keyboard or electronic product, requiring a foot switch or expression pedal.

NX-P is designed as a standard expression pedal which works great with Nektar Panorama products as well as the new Pacer footswitch controller.

Notes: Dual foot switch controller for on-the-fly control of guitar effects and amplifiers. Dual mono or stereo jack compatible with individual latching/momentary options for each switch. Designed for use with NuX pedals and compatible with many other types of equipment.

LED indicator per pedal
Latching or non-latching selectable
Compatible with NUX Loop Core Deluxe, JTC Drum & Loop PRO and Cerberus

The box for this item contains :

NuX NMP-2 dual foot controller

Power supply: 9Vdc (5.5 x 2.1mm, centre-negative) optional for LEDs
Dimensions: 96 x 50 x 46mm
Weight: 200g

Notes: This simple but robust single-channel switch can be used universally. Whenever a change of channel or function via foot switch is required. For example, the PF1 can be used to switch the channel of a guitar amp or activate a particular function on a keyboard. The switch is latching, not spring return. To connect, a standard Mono Jack cable is sufficient.

Notes: The FS01 is a momentary foot switch for Zoom guitar and bass effects devices that allows you to bypass effects, turn the tuner on or off, enable the delay hold function and mute the delay input, as well as providing tap tempo input for rhythms, the looper and various effects parameters.

The FS01 can also be used with the Zoom R8 recorder to start and stop playback, punch in and out manually and change effect patches.