100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Effects pedals

Inicio  Equipment  

Effects pedals

Options
Artículos del 1 al 50 de 408 en la página 1 de 9
1  2  3  4  5  6  7  8  9  »
Subscribe to our weekly Studio Equipment emails
Behringer ADI21 V Tone Acoustic Driver DI Acoustic Amp Modeler/Direct Recording Preamp/DI Box
Cat: 493805 Rel: 26 Jun 13
 
Analog modelling acoustic guitar preamp with DI recording output
Notes: For an unplugged sound that's rich, loud and electrifying, step on the V Tone Acoustic Driver DI ADI21. This amazing little box is essential for piezo equipped guitars and will make your acoustic guitar sound come to life!

By their very nature, piezo pickups tend to be very bright, with somewhat reduced bass response and warmth. The ADI21 combines the features of an active DI (direct injection) box with our proprietary microphone/tube emulation. If you don't want to use the emulation feature, the ADI21 also functions as a superb active DI box. The blend control allows you to mix the amount of modeled tone with your instrument's normal output. The resulting sound is more natural with smooth saturation, just as if your guitar were being miked.

Armed with an onboard 3 band EQ, with sweepable mids to keep feedback under control, the ADI21 effectively eliminates the harsh harmonics of piezo pickups. The output is laid out on 1/4" TS or balanced gold plated XLR connectors, which can be used to send a low impedance signal to the mixing console or straight to tape. You also get a ground lift switch to eliminate annoying ground loop hum problems. You can power this little lifesaver with a 9V battery or Behringer's PSU-SB DC power supply (not included).
Read more
 More than 10 in stock $27.39
Behringer BDI21 V Tone Bass Driver DI Bass Amp Modeller/Direct Recording Preamp/DI Box
Cat: 493811 Rel: 26 Jul 13
 
Bass guitar amp modeller/DI box effects pedal with tube emulation circuitry
Notes: There are DI boxes - and then there's the V Tone Bass BDI21 - the feature packed analog DI box built especially for bass.

The BDI21 combines the features of an active DI (direct injection) box with our proprietary tube emulation circuitry. It's like having a truckload of vintage tube amps right at your toes! The Blend control allows you to mix the amount of tube emulation you want with your direct bass signal. And if you don't want to use the tube emulation feature, just step on the switch and the ADI21 functions as a superb active DI box.

With its dedicated Drive, Treble, Bass, Level, and Presence dials, the BDI21 DI box goes above and beyond, giving you vintage tube tones for some funked-up slap, gonzo overdrive and everything in-between. You can use the BDI21 as a recording output DI, with tube emulation, or as a standard active DI box, when running in bypass mode. The output is laid out on 1/4" TS or balanced, gold plated XLR connectors. There's also a ground lift switch that eliminates typical ground loop hum problems.

You can power this bad boy with a 9V battery or Behringer's PSU-SB DC power supply (not included).
Read more
 More than 10 in stock $32.00
Behringer BOD400 Tube Sound Overdrive Pedal for Bass Guitar
Cat: 486284 Rel: 04 Apr 13
 
Authentic tube sound overdrive pedal for bass guitar
Notes: Get rich, tube-like distortion, smooth sustain and super-fat tone! Here's an overdrive pedal that supports the entire frequency range of bass guitars, even 5 & 6-stringers. The best part of all, the Bass Overdrive BOD400 was designed specifically for bass, so the bottom-end won't drop out when you pull the trigger.

Read more
 5 in stock $22.77
Behringer CS400 Compressor/Sustainer Ultimate Dynamics Effects Pedal
Cat: 493807 Rel: 27 Jul 13
 
Guitar compression/sustain effects pedal with dedicated level, tone, attack, and sustain dials
Notes: If tone is the name of your game, the Compressor/Sustainer CS400 will add amazing impact to your tone and provide endless sustain.

Dynamics play an important role in music. They help to convey emotion, whether it's a sultry blues solo or the unrelenting gallop of unfettered metal. But uncontrolled dynamics can take all your best intentions and turn them into so much, well - mush. That's where compression comes in, softening loud sounds and boosting low signal levels to keep everything more uniform. So, a compressor's main job is to make every note the same volume.

Ever notice how some strings on your guitar or bass sound louder than others? This is partly due to physics. Strings with lower mass just don't put out as much volume as the heavier ones. When used properly, a compressor makes all of the strings the same volume. Compressors are also great for slap style bass players, making thumb slaps, string pulls and muted notes all the same volume, for an extremely percussive effect.

You can dial in the right amount of compression using the dedicated Attack and Sustain dials. The Level control allows you to set the output to subtle, or engage a monster volume boost. Tone lets you add exactly the right level of highs. From clean, snappy country leads to rock solos that scream for eons, the CS400 is built to make your sound the center of attention.

Its LED tells you when it's on, and the top quality on/off switch maintains outstanding signal integrity in bypass mode.

You can power this scene stealer with either a 9V battery or Behringer's PSU-SB DC power supply (not included).
Read more
 More than 10 in stock $27.12
Behringer DR600 Digital Stereo Reverb Effects Pedal
Cat: 486286 Rel: 06 Apr 13
 
Digital stereo reverb effects pedal
Notes: You wouldn't think of using anything less than best reverb you could get in the studio. So why skimp on the 'verb at your live gig? Now you can add studio-grade reverb to any amp with the mind-blowing Digital Reverb DR600.

This 24-bit, high-resolution collection packs six of the most desired reverb types (Spring, Plate, Hall, Room, Gate and Modulate) into the ultimate to-go package. With its dual output jacks, you will dazzle your audience with true stereo reverb.

Just select the reverb type with the Mode control, and then dial in the Level, Tone and Time. It just doesn't get any easier than this. The blue LED tells you when the DR600 is activated, and the top-quality on/off switch maintains incredible signal integrity when in bypass mode. You can power the DR600 with a 9V battery or Behringer's PSU-SB DC power supply (not included).


Read more
 More than 10 in stock $28.49
Behringer EQ700 Graphic Equalizer Ultimate 7 Band Graphic Equalizer
Cat: 493800 Rel: 14 Jun 13
 
7 band EQ pedal for guitar
Notes: Finding it hard to get the perfect sound from your guitar? Maybe your guitar gets lost in the mix? Do you have major feedback issues with your acoustic?

The problem's not your guitar - you need an equalizer! The Graphic Equalizer EQ700 provides total control over your tone and puts the brakes on annoying feedback, no matter what the performance situation. You can instantly improve the sound of your guitar with a little help from the Behringer EQ700.

With 15dB of available boost or cut per band (that's a lot!), the EQ700's seven frequency bands have been carefully optimised to provide the ultimate tools for EQing the guitar. Of course, to make full use of the EQ700's capabilities, it helps to first understand some basics about the frequency range of your axe.

The EQ700 covers the audio spectrum from below 100Hz to over 6.4KHz, allowing you to effectively cut or boost specific frequencies to help focus your sound. Special attention has been paid to the critical midrange frequencies, which can make or break your tone.
Read more
 More than 10 in stock $31.74
Behringer FX600 Digital Multi FX Stereo Effects Pedal
Cat: 493768 Rel: 27 Jul 13
 
Guitar multi effects pedal with flanger, chorus, phaser, delay and more
Notes: Studio effects processors sound really good, but they can bulky, complicated and expensive. Now you can have all the power and great sound of studio grade, stereo effects processing, thanks to the ultra affordable, and easy to use Digital Multi FX FX600.

This studio in a box features flanger, chorus, phaser, delay, tremolo and pitch shifter, all in mind blowing 24bit/40KHz resolution that turns everyday riffs into 3D epics from the outer limits.

Just select one of the 6 effects with the dedicated FX knob, and then use the two PAR(ameter) dials to fine tune the effect. The LEVEL control determines how much of the effect is mixed with the original signal.

The LED tells you when the FX600 is activated, and the top quality on/off switch maintains incredible signal integrity in bypass mode.

You can power this pedal with either a 9V battery or Behringer's PSU-SB DC power supply (not included).
Read more
 More than 10 in stock $28.49
Behringer HB01 Hellbabe Ultimate Wah Wah Pedal
Cat: 493705 Rel: 29 Jul 13
 
Wah wah pedal with optical control and up to +15dB volume boost
Notes: The Hellbabe HB01 is unlike any wah you've ever stepped on, offering a tremendous array of tone sculpting options. You get everything from old school wah to the most up to date sounds, all in one mesmerizing effects pedal. The Hellbabe will add new dimension and depth to your artistic expression.

First of all, the Behringer Hellbabe's heel down range control provides low frequency adjustment that can be swept from 440Hz down to 250Hz, making the HB01 the ideal companion for either guitar or bass. For custom tailoring the toe down frequency range, the Hellbabe features a fine control, allowing you to adjust the frequency sweep as high as 2.2KHz.

It is also possible to dial in a powerful volume boost (up to +15dB), so that when you do step on the HB01, your guitar will rise to the top of the mix. A highly versatile Q control is provided for precise filter shaping and for achieving vocal like effects.

Unlike anything else on the market, the HB01 uses no mechanical pots or switches, which significantly reduces on wear and tear. But that's not all that separates this pedal from the pack; it also features a spring back pedal mechanism with resistance adjustment. And thanks to our ultra bright LED indicators you'll always know when it's on and when the volume boost is activated. You can power this bad boy with a 9V battery or our PSU-SB DC power supply (not included).
Read more
 More than 10 in stock $53.16
Click for better price!
or call +44 20 7424 1960
quote 493705
Behringer HD300 Heavy Distortion Heavy Metal Distortion Effects Pedal
Cat: 493731 Rel: 26 Jun 13
 
Guitar distortion effects pedal with dedicated gain, distortion, tone, bottom and level controls
Notes: When you're ready to go beyond the boundaries of brutality, you have to throw some serious weight to get the job done. That's when you break out the Heavy Distortion HD300.

In addition to providing loads of devastating distortion, this little sonic warhead allows you crank up the bottom end and the gain, to lay waste to everything in your path.

With its dedicated gain boost, distortion, tone, bottom and level control, you can dial in a trademark sound all your own. The blue status LED tells you when this pedal is activated, and the rock solid on/off switch maintains outstanding signal integrity in bypass mode.

You can power this behemoth with either a 9 V battery or a PSU-SB DC power supply (not included)
Read more
$30.92 SAVE 10%
 More than 10 in stock $27.83
Behringer TO800 Vintage Tube Overdrive Effects Pedal
Cat: 493745 Rel: 27 Jun 13
 
Guitar overdrive effects pedal with dedicated drive, tone and level dials
Notes: The classic sound of blazing, overdriven vacuum tubes never goes out of style. This sound is at your command when you put the Vintage Tube Overdrive TO800 in your effects chain.

In order to recreate the sound of real tube crunch, we put the original 4558 op amps and legendary MA150 distortion diodes in the TO800, putting rock's most powerful overdrive sounds at your disposal. The resulting output is extremely faithful to that of the vintage tone machines that made rock and roll history.

Dedicated drive, tone and level controls let you shape exactly the sound you want. The status LED tells you when this pedal is activated, and its top quality on/off switch gives you the highest signal integrity in bypass mode.

You can power the TO800 via a 9V battery or Behringer's PSU-SB DC power supply (not included).

Read more
 More than 10 in stock $28.75
Behringer UM300 Ultra Metal Heavy Metal Distortion Effects Pedal
Cat: 493751 Rel: 27 Aug 13
 
Guitar distortion effects pedal with dedicated distortion, level and 3 band EQ dials
Notes: In the churning, smoldering world of heavy metal, it's the middle frequencies that make all the difference between mush and muscle. With the UM300 Ultra Metal, you not only get control over the mids - you can micromanage them!

The UM300 effects pedal gives you the most extreme, sought after hard rock and heavy metal sounds with super thick, tube like distortion - plus virtually endless sustain.

Like most distortion stomp boxes, the UM300 comes with distortion and level controls. And the high and low controls let you dial in the amount of top end and bottom you desire. But the similarity to other stomps ends right there. Much like our world class mixing consoles, we've given the UM300 a mid freq control, allowing you to select a midrange frequency (from 200Hz-5KHz) and boost/cut it by up to 15dB (that's a lot!). What this means in terms of tone, is thick, tube like distortion with endless sustain, for everything from aggressive, traditional metal assaults to bone crunching mayhem.

A bright blue LED tells you when the UM300 is active, while a top quality on/off switch maintains highest signal integrity in bypass mode.

You can power the UM300 with Behringer's PSU-SB DC power supply (not included), or pop in a 9V battery.
Read more
 More than 10 in stock $28.67
Behringer UT300 Ultra Tremolo Classic Tremolo Effects Pedal
Cat: 493794 Rel: 26 Jul 13
 
Guitar temolo effects pedal with dedicated rate, wave and depth controls
Notes: When you've got to have the classic tremolo made famous by vintage '50s amps, get the Behringer Ultra Tremolo UT300.

The classic surf music of the '50s and '60s might not have even happened if tremolo hadn't come along. Vintage amps produced this intriguing effect by pulsing the volume of the instrument signal at a user-adjustable rate. The UT300 pays homage to this legendary sound, bringing it up to date for modern surf freaks.

With its dedicated Rate, Wave and Depth dials, you can shape a pulsating tremolo that nails every sound from rowdy rockabilly and surging surf, to modern space rock.

A red LED tells you when the effect is activated, and you can power this groovy stomp box with either a Behringer PSU-SB DC power supply (not included) or a 9 V battery.

A top quality on/off switch maintains excellent signal integrity in bypass mode.
Read more
 5 in stock $28.75
Behringer VD400 Vintage Delay Effects Pedal
Cat: 486207 Rel: 11 Apr 13
 
Vintage analog delay effects pedal
Notes: From elastic delay to vintage slap-back echo, the Vintage Delay VD400 harnesses the authentic sounds of classic 1960s studio wizardry.

Though digital sound technology constantly evolves, nothing sounds quite like the old-school analog Bucket Brigade-style delay you get when you step on the VD400. With its dedicated Repeat Rate, Intensity and Echo dials, this amazing little stomp box evokes the spirits of some of rock and roll's most legendary heroes, and provides up to 300 milliseconds of true analog delay. Every type of classic delay, from a deep-space whisper, to an interplanetary battle cry, is at your command.

The bright blue LED tells you when the Vintage Delay is activated and the top-quality on/off switch maintains excellent signal integrity in bypass mode. You can power the VD400 with either a 9V battery or the PSU-SB DC power supply (not included).
Read more
 More than 10 in stock $24.41
Behringer Vintage Tube Monster VT999 Classic Vacuum Tube Overdrive Pedal
Cat: 493712 Rel: 03 Jan 17
 
Overdrive pedal with hand selected 12AX7 vacuum tube
Notes: The VINTAGE TUBE MONSTER VT999 effects pedal has that full-tone roar of a tube engine under its hood, letting you take off with anything from warm blues overdrive to heavy distortion. Add to this the excellent build quality and true-bypass wiring, and you begin to see just how monstrous this pedal really is!

You can have it all:
This high-quality stomp box has the warm sound of a hand-selected 12AX7 vacuum tube. In addition, the VT999 offers an integrated and switchable noise gate with adjustable threshold that keeps your signal noise-free. The VT999 provides the ultimate in distortion-laced tone shaping, with an onboard 3-band EQ and dedicated Gain and Master output level control.

True-bypass Switches:
The brilliant status LED tells you when the VT999 is activated, and the top-quality on/off switch allows for true mechanical bypass when the effect is not in use, so your tone stays completely intact. VT999's dedicated power supply comes with it, so you're ready to rock right-out-of-the-box!

Value:
With the VINTAGE TUBE MONSTER VT999 defining the ultimate tube-distortion tone, your guitar playing will definitely be kicked into monster overdrive! Check out the VT999 at your local dealer today, or grab yours online.
Read more
 8 in stock $61.83
Click for better price!
or call +44 20 7424 1960
quote 493712
Behringer VP1 Vintage Phaser Effects Pedal
Cat: 486211 Rel: 11 Apr 13
 
Authentic vintage style phase shifter effect pedal
Notes: Authentic and classic three dimensional phase shifting, from rapid rotary speaker to impressive jet plane effects! There is a dedicated Rate control and separate Tone switch for the fine-tuning of effect speed and tone. A status LED for the effect is included, plus a true hard-wire bypass for ultimate signal integrity. No matter what phasing effect sound you're after, VP1 is bound to make getting there easier! The VP1 runs on a 9V battery or a DC power supply (not included).
Read more
 More than 10 in stock $31.74
Danelectro Billionaire Billion Dollar Boost Pedal
Cat: 676314 Rel: 09 Mar 18
 
Compact boost effect pedal for electric guitar
Notes: The 'Billion Dollar Boost' reissue of a rare 80's 'hidden gem'. Boosts all frequencies, plus provides pure pre-amp clean with lots of gain. Clean and crisp at 50% or less, but pushes the amp into crunchy bite at 50% or more, this pedal will become your secret weapon.
Read more
MRP:$104.15 SAVE 51%
 2 in stock $50.98
Click for better price!
or call +44 20 7424 1960
quote 676314
Danelectro Billionaire Filthy Rich Tremolo Pedal
Cat: 676317 Rel: 09 Mar 18
 
Tremolo pedal with speed/depth controls
Notes: Danelectro invented the thickest, deepest amplifier tremolo in the late 1940's. Billionaire brings back this original Danelectro technology for the richest tremolo tones ever. One listen and this will be a prized part of your arsenal.
Read more
MRP:$104.15 SAVE 51%
 1 in stock $50.98
Click for better price!
or call +44 20 7424 1960
quote 676317
Danelectro Billionaire Pride Of Texas Overdrive Pedal
Cat: 676311 Rel: 09 Mar 18
 
Overdrive effect pedal for electric guitar
Notes: The 'Pride of Texas' recreates that 'holy grail' bluesy tone of one of the greatest and most influential guitar players to walk the earth, fattening up your signal without losing clarity or voice. Ideal for both single coils or humbuckers, the 'Pride of Texas' provides plenty of boost for crunchy rhythm or screaming lead solos.
Read more
MRP:$117.17 SAVE 51%
 1 in stock $57.49
Click for better price!
or call +44 20 7424 1960
quote 676311
Danelectro The Breakdown Boost Overdrive Pedal
Cat: 727397 Rel: 13 May 19
 
Vintage style boost/overdrive effects pedal
Notes: Rewind to 1968. Famous guitar god uses this pedal to record his first album. Entire planet goes nuts. Inexplicably, the pedal then disappears. Until now. Danelectro resurrects this awesome, incredibly organic sounding pedal. 6 position "Break Up" control takes your guitar signal and slams the front of your amp with increasing punch. Positions 1 through 3 are ear-friendly and have "leave on all the time" potential. Positions 4 through 6 grab you and knock you back against the nearest piece of concrete. But in the most pleasant way. Caution: Do not listen to this... unless you want it to be your life companion.
Read more
 2 in stock $114.32
Danelectro The Breakdown Boost Overdrive Pedal (B-STOCK)
Cat: 792809 Rel: 13 May 19
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Rewind to 1968. Famous guitar god uses this pedal to record his first album. Entire planet goes nuts. Inexplicably, the pedal then disappears. Until now. Danelectro resurrects this awesome, incredibly organic sounding pedal. 6 position "Break Up" control takes your guitar signal and slams the front of your amp with increasing punch. Positions 1 through 3 are ear-friendly and have "leave on all the time" potential. Positions 4 through 6 grab you and knock you back against the nearest piece of concrete. But in the most pleasant way. Caution: Do not listen to this... unless you want it to be your life companion.
Read more
 1 in stock $113.29
Digitech Drop Polyphonic Drop Tune Pedal
Cat: 548856 Rel: 06 Oct 14
 
Polyphonic drop tune pedal with range from 1 semitone to 1 octave
Notes: The DigiTech Drop is a dedicated polyphonic drop tune pedal that allows you to drop your tuning from one semitone all the way down to a full octave. Get down-tuned chunk without having to change guitars! The Drop also features a momentary/latching switch. With the switch set to momentary, you can turn the Drop into a true performance pedal. Fast trills and roller-coaster pitch dips are at the tip of your toes.

Controls:
EFFECT SELECTOR KNOB- Selects which of the Drop effect settings is used when the effect is active.
MOMENTARY ON/OFF SWITCH - Selects how the effect footswitch will operate. Setting this switch to "ON" will cause the footswitch to act as a momentary switch (the effect will be enabled or disabled only as long as the footswitch is pressed and held). Setting this switch to "OFF" will cause the footswitch to act as a standard latching on/off switch.

Drop Effects Settings:
Setting 1 - Transposes guitar signal down 1 semitone
Setting 2 - Transposes guitar signal down 2 semitones
Setting 3 - Transposes guitar signal down 3 semitones
Setting 4 - Transposes guitar signal down 4 semitones
Setting 5 - Transposes guitar signal down 5 semitones
Setting 6 - Transposes guitar signal down 6 semitones.
Setting 7 - Transposes guitar signal down 7 semitones
Setting OCT - Transposes guitar signal down 1 octave.
Setting OCT + DRY - Transposes guitar signal down 1 octave and adds dry signal
Read more
 1 in stock $114.83
DiMavery DP1 Distortion Pedal
Cat: 700851 Rel: 31 Aug 18
 
Mini distortion effects pedal
Notes: - Distortion from hard rock to metal
- Compact size for more space on the pedal board
- Rugged metal housing
- Robust footswitch
- True bypass
- Controls: Level, Tone, Gain
- Connections via 6.3 mm audio jacks
- AC adaptor not included
Read more
 1 in stock $32.82
DiMavery TP1 Tube Pusher Overdrive Pedal
Cat: 700858 Rel: 31 Aug 18
 
Mini overdrive effects pedal
Notes: - Top boost mode
- Compact size for more space on the pedal board
- Rugged metal housing
- Robust footswitch
- True bypass
- Controls: Level, Tone, Gain, Mode
- Connections via 6.3 mm audio jacks
- AC adaptor not included
Read more
 1 in stock $42.95
Click for better price!
or call +44 20 7424 1960
quote 700858
DOD Rubberneck Analogue Delay Pedal
DOD
Cat: 638955 Rel: 20 Oct 17
 
Analog delay effects pedal with tap tempo & built-in effects loop
Notes: The new DOD Rubberneck Analog Delay has double the features with the cool new double-wide chassis. The Rubberneck boasts over a second of warm and musical 100% analog repeats you crave, along with tap-tempo, subdivisions, and tails. Double concentric knobs give you independent control of the Modulation Rate and Depth as well as Gain and Tone of the delay.

Double footswitches allow for unique extended features like user customizable momentary control of oscillation and momentary control of the dizzying pitch sweep of "Rubbernecking." These extended features are controlled by individual clear mini knobs that double as multi-colour LED status indicators. Feedback loop send/return, remote footswitch control, true bypass, and rugged metal construction, make the Rubberneck Analog Delay the must have delay of the year.

The Rubberneck also has jacks to allow FS3X 3-button remote foot switching, and a send and return so you can add external effects to the delay path.

The DOD Rubberneck uses a 9VDC power supply to easily integrate into your existing pedalboard.
Read more
 1 in stock $199.62
Earth Quaker Devices Afterneath V3 Enhanced Otherworldly Reverberator Pedal
Notes: Giant ambience from this cleverly designed reverb pedal. Straightforward, intuitive approach with a clever 'drag' control to spread out and separate the individual digital delay lines.

Supplier notes:
The Afterneath sounds a lot like it looks - a wizard bursting forth from ethereal cave and ready for the ambient battle.

Once inside the cave, a reflection of light from an unknown source catches your eye, and you notice a bizarre sheen on the walls of the cave. You timidly inch closer to the walls of the cave. Placing your hand gently on the cavern wall, you feel the rock move. The cave is alive! Alarmed, you emit a loud gasp, which reverberates throughout the subterranean landscape. Upon further listening, it appears as though the reverberations of your voice are in fact a swarm of short digital delays which may be used to create wild and cavernous reverbs, or scattered, short, rhythmic delays with bizarre characteristics.

Take a moment to consider your Intelligence and Wisdom scores, as well as your spell inventory before proceeding further. You have seven spells at your disposal.

Will you cast "Length," which controls the decay length of the reverb?
What about "Diffuse," which adjusts the spread of the reverb? With your wand (or just the knob) turned counterclockwise, the reverb is sharper with more attack, resulting in a stuttering sputter of individual early reflections. Clockwise casts a washy, more ambient-sounding hex.

Overwhelmed by fear, you hastily cast "Dampen!" As you shout the incantation, you notice that a counterclockwise variation of this spell results in brighter tones, while as you rotate your wand clockwise; you hear darker tones with a mellower top-end. It's almost as if your magic changes the hardness of the cavern walls, and thus the tonal characteristics of the reverb!

Elsewhere in your book of magic is "Drag," which separates the individual digital delay lines, literally dragging them through the very fabric of time and space towards an unknown event horizon from which they may never return. Clockwise "Drag" positions will gather the delay lines close together for a more reverb-like effect. Turn the "Drag" counterclockwise, and the delay lines will begin to pull apart for a scattered ping-pong delay effect.

The Drag can be put under voltage or expression control using the "EXP" jack located on the side and operates in 9 different modes which are selected by the small "Mode" control. These modes are: Unquantized, Unquantized with slew, Unquantized volt/octave,
Chromatic scale, Major scale, Minor scale, Pentatonic scale, Octaves & fifths and Octaves. These modes drastically change the way the Drag control functions, especially while using an expression control or CV.

The "Reflect" alters the depth of the cave, and with it the regeneration of the reverb. This acts as a feedback control and will self-oscillate if cast by a high-level user. Turn clockwise for more wash and echoes, counterclockwise for less.

Finally, the "Mix" alters the alchemical balance between the input signal and the effect. The Afterneath does not go fully wet but does lower the level of the input signal as you raise this control to create the appearance of a fully wet reverb.

Modes
The Modes control changes the way the Drag control functions. The LED will change colors indicating which mode you are in.

1. Unquantized: Smooth, unquantized response over the operating range

2. Unquantized with Slew: Smooth, unquantized response over the entire operating range, but with a musical slew that is reminiscent of turning the varispeed knob on a vintage British tape delay. The "Drag" will lag behind the knob or cv changes, but then quickly catch up.

3. Unquantized Volt/Octave: Smooth and unquantized, yet scaled to align with the 1v/octave curve to allow melodic modulation of audio in the buffer, or control the frequency of self-oscillation like a voltage controlled oscillator.?

4. Chromatic Scale: Quantized 1v/octave to the chromatic scale?

5. Minor Scale: Quantized 1v/octave to the minor scale?

6. Major Scale (Lydian): Quantized 1v/octave to the major scale (Lydian)?

7. Pentatonic Scale: Quantized 1v/octave to the pentatonic scale?

8. Octaves & Fifths: Quantized 1v/octave to omit all but octaves and fifths?

9. Octaves: Quantized 1v/octave to omit all but octaves

Specifications:

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs

Current Draw: 100 mA

Input Impedance: 1 MO

Output Impedance: 500 O
Read more
MRP:$266.89 SAVE 23%
 2 in stock $206.13
Earth Quaker Devices Arpanoid V2 Polyphonic Pitch Arpeggiator Pedal
Cat: 781496 Rel: 14 Jul 20
 
Arpeggiator pedal
Notes: Welcome to the first dedicated compact polyphonic pitch arpeggiator effect pedal for electrical guitar! What does the Arpanoid do? The Arpanoid takes whatever you play and transforms it into an adjustable ascending or descending scale. It features 8 intuitive and expandable modes and will work on complex chords as well as single notes in any key. The Arpanoid has an all analog dry signal, all digital wet signal and true bypass switching. Like all EarthQuaker Devices pedals, this dude is handmade one at a time in sunny Akron Ohio.

1. Rate: Adjusts the speed of the sequence.

2. Up/Up-Down/Down Toggle: Switch to control the direction of the sequence. All the way left is up, the sequence will continually repeat going up. In the middle is up/down, the sequence will continually repeat going up then back down. All the way right is down, the signal will continually repeat going down.

3. Step: Selects how many notes there are in the sequence.

4. Wet: Level control for the effect signal. Unity is around noon.

5. Mode: 8 position selector switch to choose the octave and key:

Major: -1 octave to root.

Major: root to +1 octave.

Major: -1 octave through +1

Major: Random pattern

Minor: -1 octave to root.

Minor: root to +1 octave.

Minor: -1 octave through +1

Minor: Random pattern

6. Dry: Level control for the dry signal. Unity is around noon.

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 65 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies are generally recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!
Read more
MRP:$298.14 SAVE 18%
 1 in stock $245.19
Click for better price!
or call +44 20 7424 1960
quote 781496
Earth Quaker Devices Arrows V2 Pre Amp Booster Pedal
Cat: 781561 Rel: 14 Jul 20
 
Pre-amp booster pedal
Notes: The Arrows is an all-discrete tone sculpting preamp booster. It was designed with the intention of adding an additional channel of gain to all your dirt pedals as well as brightening up neck pickups. It boosts midrange, tightens up the low end and makes the top end shine while adding some push to drive your dirt into blooming sustain with excellent harmonics. Its simple interface is no nonsense; a single control that will either boost or cut your signal. Use the Arrows to remove the muck from bass heavy fuzz pedals, push light overdrives into higher gains than you thought possible or even on its own to make your signal really pop with more pizazz. All analog, true bypass and handmade one at a time in the weird pit of Akron, Ohio.

Level: Adjusts Arrows output level. Clockwise is loud, counterclockwise is quiet.

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies are generally receommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs

Current Draw: 8 mA
Input Impedance: 10 MO
Output Impedance: <10 kO
Read more
MRP:$141.91 SAVE 24%
 1 in stock $108.49
Earth Quaker Devices Avalanche Run V2 Stereo Reverb & Delay with Tap Tempo Pedal
Cat: 781595 Rel: 28 Jul 20
 
Stereo reverb & delay pedal
Notes: The Avalanche Run is a dreamy stereosonic exploratory multi-tool that includes up to 2 seconds of delay time, reverse delay, tap tempo with subdivision control, switchable true bypass or buffered bypass with 5 different tail lengths (including a sound-on-sound style lo-fi looping mode) and an assignable expression control that maps the expression jack to a control of your choice, including the toggle! The delay section allows tweaking from tape emulation to bucket brigade styles with a twist of the wide-range Tone control. The cavernous, plate-style reverb has just a touch of modulation similar to the one found in our precious Dispatch Master only more lush with an adjustable Decay. Otherworldly reverse delay and dynamic swelling reverb settings are accessible through a 3-way toggle switch. And that's just the beginning...

1. Time: This controls the delay time and goes from 0ms to just under 2000ms.

2. Repeats: Controls the regeneration of the delay, from zero repeats to near infinite.

3. Tone: Controls the tone for the delay line only. Roll off highs to the left, roll off lows to the right and get a flat response in the middle.

4. Mix: The is the volume control for the delay line. This blends in the wet with dry until 1 o'clock, 1 o'clock to 3 o'clock boosts the wet signal over the dry and 3 o'clock up brings down dry until it is fully wet when all the way up.

5. Expression Jack Assign Switch: Use this switch to map the expression jack to one of the assigned controls.

Decay: Controls the reverb decay length

R Mix: Controls the reverb mix

Time: This takes over for the delay time control and is DRASTICALLY different than the interface control. Using the expression pedal to control the time will give you all kinds of wild effects that can not be achieved by turning the knob.

Repeats: Controls the delay repeats

D Mix: Controls the delay mix

Toggle: This takes over for the toggle switch and will cross fade from forward delay in heel down position to reverse delay in toe down position.

6. Ratio Selector Switch: Selects delay subdivisions when time is set by the "Tap" switch.

1/1: Quarter Note

3/4: Dotted 8th

2/3: Quarter Note Triplet

1/2: 8th Note

1/3: 8th Note Triplet

1/4: 16th Note

7. Decay: Controls the decay length of the reverb, short decay counterclockwise, long cavernous decay clockwise.

8. Toggle Switch (Mode Selector)

Normal: This is the standard delay and reverb mode

Reverse: This is reverse delay mode with standard reverb

Swell: This is the volume swell mode

9. Mix: This is the volume control for the reverb. Blends in the wet with dry until 1 O'clock, 1 O'clock to 3 O'clock boosts the wet signal over the dry and 3 O'clock up brings down dry until it is fully wet when all the way up.

The expression jack is located on the west side of the pedal. It is a TRS jack with the tip acting as the wiper.

Using a Moog expression pedal, with the output adjustment knob all the way up, is recommended. Any other expression pedal is not guaranteed to work with the Avalanche Run.

This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

For best results, please use the included 9v center-negative 1-amp DC power supply.

Dimensions: 4.65 x 4.15 x 2.25 in. (118 x 105 x 57 mm) with knobs
Current Draw: 410 mA
Input Impedance: 1 MO
Output Impedance: 100 O
Read more
MRP:$423.12 SAVE 24%
 1 in stock $322.21
Earth Quaker Devices Bit Commander V2 Analog Octave Synth Pedal
Cat: 781605 Rel: 14 Jul 20
 
Octave synth pedal
Notes: The Bit Commander is a monophonic analog guitar synthesizer with four octaves of vintage square wave synth tones. Its no-nonsense interface makes it easy to add or subtract octaves to create a wide variety of sounds without having to dial in envelopes or oscillators. Ripping sub-octave thump, pulsing octave down, a lightly squared base tone and a swelling transformer based octave up all join together to make a single guitar sound like an army of olde tyme synths.

Controls:
1. Level: Master volume

2. Filter: Tone control more highs clockwise, more warmth counterclockwise

3. Base: Squared input signal level

4. Sub: Two octaves down level

5. Down 1: One octave down level

6. Up 1: One octave up level

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 25 mA
Input Impedance: 50 kO
Output Impedance: <500 O
Read more
MRP:$253.87 SAVE 28%
 1 in stock $183.35
Earth Quaker Devices Cloven Hoof V2 Fuzz Grinder Pedal
Cat: 781610 Rel: 28 Jul 20
 
Fuzz grinder pedal
Notes: The Cloven Hoof is the Hoof's evil twin. It looks a lot like the Hoof, only more, um . . . Cloven.

The tightness and clarity you loved about the Hoof has been kept, along with the wide range of fuzz sounds, and the rest was thrown away. NOS Germanium transistors? Nope! In their place, a set of four specially selected Silicon transistors were installed for cleaner cleans, higher gain, improved temperature stability, and a grittier, grindier, nastier fuzz tone with over 4x the gain of the original Hoof. The key resistors were replaced with with NOS Carbon Comp components to sprinkle a little bit of vintage flavor into the Cloven Hoof's searing fuzz fury. It's like they always say, "In with the old, out with the new".

The Tone and Shift controls remain intact, only now they're re-voiced for a smoother sweep, and more precise control over the Cloven Hoof's beefy low-end. Speaking of low-end, have you heard this thing on bass? Wow. Try the Cloven Hoof on a bass guitar. Seriously- you can still cut or boost the mids, and there's still a metric ton of output on tap, just do us a favor, and for the love of all that's Cloven, play this pedal with a bass guitar.

Controls:
1. Shift: This adjusts the mid content. Clockwise for scooped mids,
counterclockwise for boosted.

2. Tone: Bass to the left. Treble to the right

3. Level: Use this control to make the Cloven Hoof louder or quieter.

4. Fuzz: Clockwise for heavy, counterclockwise for light.

Tech Specs:

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 14 mA
Input Impedance: 150 kO
Output Impedance: <10 kO
Read more
MRP:$227.83 SAVE 26%
 1 in stock $168.15
Earth Quaker Devices Data Corrupter Modulated Monophonic Harmonizing PLL Pedal
Cat: 781617 Rel: 28 Jul 20
 
Harmonizing pedal
Notes: The Data Corrupter is a monophonic analog harmonizing PLL with modulation. It takes your input signal and brutally amplifies it into a crushing square wave fuzz tone that is then multiplied, divided and modulated to create a wild, yet repeatable, three-voice guitar synthesizer.

The Master Oscillator is the central nervous system at the heart of the Data Corrupter's cyberpunk hive mind. It feeds your input to the signal harvester in its original octave (Unison), one octave down (-1) or two octaves down (-2) for maximum compatibility with your preferred instrument and frequency register. Once you've chosen your input octave, then the Data Corrupter will perform its calculations and spit out an analog synthesized frequency, which can be pitch-bent for portamento or vibrato sounds by the Frequency Modulator! From there, you can blend in one of eight Subharmonic intervals up to three octaves below the input and mix in a square wave fuzz tone for maximum data corruption.

The Master Oscillator (1) is the central nervous system at the heart of the Data Corrupter's cyberpunk hive mind. The three-position switch on the Master Oscillator control panel labeled Root (2) feeds your input to the signal harvester in its original octave (Unison), one octave down (-1) or two octaves down (-2). Use the Master Oscillator's Root Switch to fine tune the Data Corrupter's tracking response for maximum compatibility with your preferred instrument and frequency register. Once you've chosen your input octave, the Data Corrupter will perform its calculations and spit out a synthesized frequency, the octave and/or interval of which may be selected via the Master Oscillator's eight-position rotary switch.

The Voice Mixer's Oscillator Control (3) adjusts the Master Oscillator blend.

The Frequency Modulator (4) applies pitch-bend modulation to the Master Oscillator. In Glide mode, you'll hear a smooth portamento as each note slides into the next. In Vibrato mode the pitch modulates up and down for a retro sci-fi laser effect.

The Subharmonic (5) assimilates the input signal into one of eight lower octave programs between one and three octaves below the original. For a more stable lower octave, set the Subharmonic's Root Switch to the Unison position, which divides the Square Wave input signal, and removes the Frequency Modulator from the Subharmonic signal path.

To unleash the cracked machine lurking within the mainframe, set the Subharmonic Root Switch to Oscillator and try not to look away as the sonic malware you just installed mangles your input signal into the sum and difference of both the Master Oscillator and Subharmonic with the Frequency Modulator applied to the upper and lower octaves.

If you think you're brave enough, set the Subharmonic Root Switch to Oscillator and try experimenting with different Master Oscillator and Subharmonic programs to wind up the doomsday clock and inch ever closer to the Singularity. Adjust the Voice Mixer's Subharmonic Control to set the lower octave volume.

Finally, (or is it?) the Square (6) control located top-left on the Voice Mixer blends in a fuzzed-out square-wave take of your input in its original octave.

The heart of this pedal is based around a CMOS Phase Locked Loop (PLL) IC. In a nutshell, the PLL takes your input signal and compares its phase and frequency against an oscillator, generates an output proportional to their difference then feeds it back to the oscillator. This then causes the oscillator to lock onto the input signal and generate a synthesized frequency. Pretty cool, right? This synthesized frequency is referred to as the Master Oscillator on the Data Corrupter.

This device takes its inspiration from the Electrax Synthax and the "Basic Frequency Synthesizer" by Ray Marston. Neither of these were really intended to be guitar effect pedals and a lot of work went into creating the Data Corrupter to provide excellent tracking and long sustain. We think you'll find it more expressive and accurate than pretty much any other PLL based effect pedal around.

This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Dimensions: 5.65 x 4.75 x 2.25 in. (144 x 121 x 57 mm) with knobs
Read more
MRP:$305.95 SAVE 23%
 2 in stock $234.33
Earth Quaker Devices Disaster Transport SR Advanced Modulated Delay & Reverb Machine Pedal
Cat: 781635 Rel: 28 Jul 20
 
Reverb & modulation delay pedal
Notes: The Disaster Transport SR is a dual delay with reverb and modulation. It was designed from the ground up to create an intense wash of lo-fi swirling tape styled echo. While it may look intimidating at first glance, it's actually pretty easy to navigate. The top row of controls are for delay A and the bottom row of controls are for delay B. Delay A is a 600ms delay with modulation and delay B is a 300ms delay with reverb. Both delays can be run separately, in parallel, in series or in series/parallel. To take it one step further, there are also expression controls for the repeats on delay A as well as bleeding delay A into delay B. The switching was designed so each delay can be used individually or in tandem with both true bypass or trails.

In addition to being used as a straight delay, straight reverb, rhythmic delay, modulated delay and old school tape-style echo, the Disaster Transport SR can also be used to create a wide variety of wild sounds ranging from warped records, clanging flange, smooth chorus, echoed out squalls and various other-worldly effects that will blow your mind, man. If you are a fan of old school tape delay and crazy lo-fi sounds, you will get hours of enjoyment every time you plug into the Disaster Transport SR.

The controls for delay A and B are separated by row. The top row is for delay A and the bottom row is for delay B.

Time: Controls the delay time from about 30ms up to 600ms.

Repeats: Controls how many regenerations of the signal there are. This ranges from one single repeat through an endless wash into self oscillation. This can also be controlled via an expression pedal. The Moog EP-2 is recommended.

Mix: Level control for the wet signal. Unity is around center, anything above is boosted. Boosting this works great when using a distorted signal. Please keep in mind this is a gain control, a bit of hiss is normal when it's above unity.

Depth: Controls the intensity of the modulation, from no modulation to all out seasick pitch bends.

Rate: Controls the rate of the modulation. The LED for delay A flashes in time with the modulation to visually show where the rate is set.

Bleed: This feeds delay A into delay B, post reverb (see block diagram for visual explanation). Use this control for series or series/parallel operation to create rhythmic repeats, extra long delay time or an all out echo wash. This can also be controlled via an expression pedal. The Moog EP-2 is recommended. When using the bleed, experiment with the repeat controls on each delay line. Try using them in different settings, both together and individually, for different timing and textures.

Delay B Controls
Reverb: Controls the amount of reverb added to the input of delay B.

Mix: Level control for the wet signal. Unity is around center, anything above is boosted. Boosting this works great when using a distorted signal. Please keep in mind this is a gain control, a bit of hiss is normal when it's above unity.

Repeats: Controls how many regenerations of the signal there are. This ranges from one single repeat through an endless wash into self oscillation.

Time: Controls the delay time from about 30ms up to 300ms.

The switches for both delays switch the inputs only. The outputs are always connected. This allows you to have trails by always leaving the bypass switch engaged or to use the bypass switch as the master on/off for true bypass. Additionally, you can feed delay A in to delay B with the bleed control without having delay B switched on for a cleaner rhythmic delay.

Tech Specs:

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 5.65 x 2.25 in. (121 x 144 x 57 mm) with knobs
Current Draw: 107 mA
Input Impedance: 500 kO
Output Impedance: <1 kO
Read more
MRP:$415.31 SAVE 25%
 1 in stock $310.28
Earth Quaker Devices Dispatch Master V3 Digital Delay & Reverb Pedal
Cat: 781637 Rel: 28 Jul 20
 
Delay & reverb pdeal
Notes: The Dispatch Master is a hi-fi digital Delay & Reverb Device that combines independent delay and reverb effects into one space-saving enclosure, so you can keep deep ambient echoes (or just a quick slapback) on speed-dial.

The best-selling EarthQuaker Devices pedal just got better with new Flexi-Switchr Technology. Want to dip into ambient delay and reverb sounds for just one note? Press and hold the footswitch for as long as you use the effect, release it when you're finished, and resume your regularly scheduled dry sound. To use the Dispatch Master as a normal effects pedal, press the switch once to activate and again to bypass.

To Use Both Effects at the Same Time, Simply Adjust all Controls to Taste:

The Mix (1) control is a wet/dry blend that adjusts the overall level of the affected signal.

Time (2) sets the delay time from 0ms to 1500ms (1.5 seconds).

Reverb (3) controls the amount of reverb. Counterclockwise is less reverb, clockwise is more reverb.

Repeats (4) controls the regeneration of the delay signal. When the Repeats control is set to maximum, you'll get infinite repeats without runaway self-oscillation, which makes it great for creating drones, dialing in the ultimate post-rock guitar sound without feedback, or just having fun.

To Use the Dispatch Master as a Delay Only:

Turn the Reverb control all the way down.

Adjust the Time, Repeats, and Mix controls to taste:

To Use the Dispatch Master as a Reverb Only:

Turn the Time and Repeats controls all the way down

Adjust the Reverb and Mix controls to taste

THIS IS IMPORTANT! In Reverb-only mode, the Repeats control has a secondary function. It can be used to adjust the decay, depth, and tonal quality of the reverb! Turn it up for more dynamics and a thicker tone.

This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 78 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$266.89 SAVE 21%
 1 in stock $210.47
Earth Quaker Devices Dunes V2 Mini Mega Ultimate Overdrive Pedal
Cat: 781639 Rel: 28 Jul 20
 
Overdrive pedal
Notes: Dunes is a condensed take on our highly popular Palisades "808-style" overdrive. All the glitz and glamour of the original Palisades has been stripped away, leaving only the bare essentials required for a rippin' mid-boosting transparent overdrive. It has all the great tone of the grown-up Palisades but with a simplified interface and a smaller footprint!

The Dunes features the same Gain, Tone and Level controls as the Palisades, along with Earth Quaker's favoured voice and bandwidth settings, as well as the Normal/Bright toggle. The selectable clipping Voices are: MOSFET for a tight crunchy sound (Palisades' Setting 3); Silicon Asymmetrical clipping for tighter light gain OD closest to the classic 808 sound (Palisades' Setting 4), and None, which goes from clean boost to gritty, pure op-amp distortion with a massive volume boost (Palisades' Setting 1). The two Bandwidth settings are Stock for the classic tone (Palisades' Setting 3) and Full Range for more low end (Palisades' Setting 5).

Controls:
1. Tone: Brighter clockwise, warmer counterclockwise

2. Voice: MF- MOSFET diode clipping, N- No diode clipping, Si- Silicon diode clipping

3. Gain: Adjusts the drive, dirtier clockwise, cleaner counterclockwise

4. Normal/Bright: Normal is a warm full tone, Bright is livelier tone with more chime

5. Volume: Sets the output level

6. Bandwidth: Left is brighter with more emphasis on the mids, right is full range for more low end

Tech Specs:

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies, are a;ways recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 16 mA
Input Impedance: 500 kO
Output Impedance: <1 kO
Read more
MRP:$253.87 SAVE 20%
 1 in stock $202.88
Click for better price!
or call +44 20 7424 1960
quote 781639
Earth Quaker Devices Erupter	Ultimate Fuzz Tone Pedal
Cat: 781640 Rel: 23 Jul 20
 
Fuzz tone pedal
Notes: When's the last time you turned up your favorite fuzz pedal to anything but eleven? If there's one true thing about rock n' roll, it's that it sounds best cranked all the way up. But where do we go from here? We go one louder. Enter the Erupter.

The Erupter is the result of over two years' worth of tone-chasing, tweaking, and experimentation in search of the ultimate classic fuzz tone with a big low end, a biting top end without being too harsh, and just enough output to politely send a tube amp over the top to deliver a well-rounded and defined fuzz tone with just enough pummeling intensity, so you can rock n' roll all night and still get to bed at a reasonable hour.

It's the perfect fuzz... just sayin'.

Controls:
Bias: This control has a center detent for the perfect fuzz setting. When in the center position, the tone will be big and round with a slight volume boost and great sustain. As you turn this counterclockwise it becomes more gated with lower output. As you turn this clockwise it becomes louder and more refined.

Tech Specs:

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 9 mA
Input Impedance: 500 kO
Output Impedance: <1 kO
Read more
MRP:$207.00 SAVE 17%
 1 in stock $171.41
Click for better price!
or call +44 20 7424 1960
quote 781640
Earth Quaker Devices Grand Orbiter V3 Phase Machine Pedal
Cat: 781668 Rel: 28 Jul 20
 
Phase machine pedal
Notes: Grand Orbiter is a 4 stage OTA-based phaser with a diverse feature set that can go from stationary and resonant to slow and mellow and on through fast and swirly. It has three way toggle switch to select between the ranges of modulation. The master Rate control fine tunes the speed of the LFO in each of these modes and the flashing red LED acts as a visual indicator, even when the effect is in bypass mode. The Depth control blends the shifted signal in with the dry signal and controls the intensity of the effect. The Sweep control governs the peak frequency of the phased signal's tone, turned full clockwise the sweep is lively and intense, whereas turning counter clockwise yields a darker, more laid back peak. The Resonance provides a wide range of control over regeneration and at higher settings adds a more pronounced and resonant tone. You can also use the Grand Orbiter as a true pitch vibrato with the "Phase/Vibrato" switch. When in "Vibrato" mode, the dry signal is removed and the Depth controls acts as a volume control. This pedal is 100% analog, true bypass and built by entirely by hand in beachy Akron, Ohio.

1. Sweep: Controls the frequency peak of the sweep. Higher peak clockwise, lower peak counter clockwise.

2. Rate 1,2,3: Changes the range of the speed control. Rate 1 is slow mode, Rate 2 is LFO kill to use the Orbiter as a fixed resonant filter, Rate 3 is fast mode.

3. Rate: Controls the speed of the LFO. Faster clockwise, slower counterclockwise.

4. Depth: Controls the amount of phase effect mixed with dry signal. Clockwise for more intense phasing, counterclockwise for less. In "Vibrato" mode, this acts as a volume control.

5. Phase/Vibrato: Cuts the dry signal to create a vibe/vibrato effect depending on the setting of the other controls. Vibrato is created by turning the resonance down low.

6. Resonance: Controls the regeneration of the phased signal. More resonant clockwise, more subtle counterclockwise.

Tech Specs:

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 15 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$266.89 SAVE 30%
 1 in stock $187.98
Earth Quaker Devices Hoof Reaper V2 Double Fuzz With Octave Up Pedal
Cat: 781683 Rel: 14 Jul 20
 
Dual fuzz pedal
Notes: The Hoof Reaper features Earth popular Hoofr and Tone Reaper fuzz pedals in one handy enclosure with the added bonus of an old school analog octave up. It was originally released as a special limited run item back in 2010 and demand was so high that Earth Quaker decided to reintroduce it back into their line. Capable of creating everything from subtle octave-up overtones through crushing octave squalls that simulate exploding stacks of amps. Each effect can be used individually as well as in series but the order of effects is preset for optimum performance.

Controls:
Hoof
1. Level: Controls the output volume

2. Fuzz: Controls sustain and gain

3. Tone: Treble to the right. Bass to the left

4. Shift: Controls the mid frequencies. More pronounced to the left. Scooped to the right.

Tone Reaper
5. Level: Controls the output volume

6. Fuzz: Controls the sustain and nature

7. Tone: Treble to the left. Bass to the right

Dimensions: 4.75 x 5.65 x 2.25 in. (121 x 144 x 57 mm) with knobs
Current Draw: 18 mA

Hoof
Input Impedance: 130 kO
Output Impedance: <10 kO

Tone Reaper
Input Impedance: 47 kO
Output Impedance: <1 kO

Octave
Input Impedance: 160 kO
Output Impedance: <10 kO
Read more
MRP:$423.12 SAVE 23%
 1 in stock $324.39
Earth Quaker Devices Hoof V2 Hybrid Fuzz Pedal
Cat: 781679 Rel: 23 Jul 20
 
Fuzz pedal
Notes: Earth Quaker Devices' flagship fuzz pedal can be found on thousands of pedalboards around the world and has rocked countless stages from stinky suburban basements to Madison Square Garden. Twice.

The Hoof is loosely based on the classic green Russian fuzz circuit and features a hybrid Germanium/Silicon design, pairing maximum tone with maximum temperature stability not found in finicky and expensive vintage units. Earth Quaker Devices have hand-matched their NOS Germanium transistors to exacting specifications for pedal-to-pedal consistency, taking the guesswork out of your fuzz purchase, and guaranteeing that your Hoof delivers the same smooth, natural, and harmonically-rich sustain as all your friends' Hoofs. All your friends have Hoof fuzzes, right?

Controls:
Shift: This adjusts the mid content, clockwise for scooped mids, counterclockwise for boosted.

Tone: Bass to the left, Treble to the right.

Level: Use this control to make the Hoof louder or quieter.

Fuzz: Clockwise for heavy, counterclockwise for light.

Tech Specs:
Switching
This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

Power
This device can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 15 mA
Input Impedance: 130 kO
Output Impedance: <10 kO
Read more
MRP:$227.83 SAVE 24%
 1 in stock $173.58
Earth Quaker Devices Hummingbird V4 Repeat Percussions Tremolo Pedal
Cat: 781684 Rel: 14 Jul 20
 
Tremolo pedal
Notes: The Hummingbird is a choppy, sawtooth tremolo modeled on the vintage "repeat percussion" unit and similar to those found in old Valco and Vox amplifiers. It is capable of producing everything from classic "50's style" shimmering tremolo to a synthy, delay-like chop that turns your signal into a burst of short pings and on through to near ring modulation speeds. Simply choosing between modes 1 (slow), 2 (mid-tempo) or 3 (fast) and adjusting the rate and depth controls will unlock a whole new world of amplitude modulation at your feet. The Rate is also expression pedal accessible to allow instant changes on the fly. Using an expression pedal opens up the possibility of true random amplitude modulation! In addition to the modulation, the Hummingbird has plenty of clean gain on-tap allowing you to either boost or cut the signal using the level control. If the Depth is turned to zero, the Hummingbird will become a JFET clean boost!

Controls:
1. Depth: This adjusts how much the oscillator affects the signal. All the way clockwise produces a full chop, all the way counterclockwise produces no chop and the Hummingbird can be used as a simple JFET booster.

2. Mode: Three way toggle switch which selects the range of the oscillator. Mode 1 is slow, Mode 2 is mid tempo and Mode 3 is fast.

3. Rate: This adjusts the speed of the oscillator. Faster clockwise, slower counterclockwise.

4. Level: Adjusts the output volume

5. Expression Jack: Use an expression pedal to adjust the rate with your foot! When an expression pedal is in use the Rate control is defeated. We recommend the Moog EP-2 expression pedal.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 10 mA
Input Impedance: 50 kO
Output Impedance: <10 kO
Read more
MRP:$220.02 SAVE 19%
 1 in stock $177.92
Click for better price!
or call +44 20 7424 1960
quote 781684
Earth Quaker Devices Levitation V2 Reverberation Machine Pedal
Cat: 781688 Rel: 23 Jul 20
 
Reverberationmachine pedal
Notes: Have you ever wanted your tone to soar like a majestic eagle in a vast canyon? Perhaps you are a simpler mortal and just want your tone to echo like the cries of a sparrow in a small room... Now you can do both like a champ plus a whole lot more! Welcome to the Levitation reverberation machine! This Levitation device is a vintage-voiced reverb that aims to fit somewhere between dirty sixties chambers, classic spring and the big, ringing plate reverbs of days gone by. Four knobs and one switch control quite a bit more than you'd expect. Want a slap back small room sound? Set all of your controls to the minimum and use the mix to dial in the sound of room devoid of any thing but a guitar and amp. Want to revel in infinite spatial oscillations? Flip the toggle to Long, turn up the Atmosphere and Decay then tune out. Dial in a bright chiming slap back by turning the Tone all the way counterclockwise and reducing the Decay. Dime everything for a rattling, full-bandwidth assault. You are only limited by your imagination!

Controls:
1. Mix: This controls how much wet signal is blended in with the dry. More reverb clockwise, less counterclockwise.

2. Length (Toggle): Broad stroke control for decay time. Shorter to left, longer to the right.

3. Decay: Controls the length of the reverb decay. Longer clockwise, shorter counterclockwise.

4. Tone: This is an input bandwidth control for the reverberated signal. All the way clockwise reduces all low end content to make a brighter reverb, turning counterclockwise allows more low end to pass through resulting in a fuller reverberated tone.

5. Atmosphere: This is a harmonic regeneration control, it feeds the upper frequencies of the reverb trails back through to create a more harmonic (ringing) reverb. More atmosphere clockwise, less counterclockwise.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 72 mA
Input Impedance: 1 MO
Output Impedance: <10 kO
Read more
MRP:$259.08 SAVE 27%
 1 in stock $188.76
Earth Quaker Devices Night Wire V2 Harmonic Tremolo Pedal
Cat: 781691 Rel: 28 Jul 20
 
Tremolo pedal
Notes: Really clever and creative approach to tremolo effects here: the signal is split into high and low frequencies, then the signals are modulated with low-frequency oscillators for funky, organic movement.

Supplier notes:
The Night Wire is a feature-rich harmonic tremolo. What is harmonic tremolo? In short, the signal is split into high pass and low pass filters, then modulated with an LFO that is split 180 degrees. The Night Wire takes the traditional harmonic tremolo a few steps further by allowing the center point of both filters to be adjusted for different tones. The filter frequency has three modes: Manual, LFO and Attack. In Manual mode, the center point can be set to a fixed position with the frequency control. In LFO mode, the filters are continuously swept and the frequency control adjusts the speed. In Attack mode, the filters are dynamically swept according to pick attack and the frequency control acts as a range control, much like a standard envelope filter. The tremolo section has two modes, Manual and Attack. In Manual mode, the speed of the tremolo is governed by where the rate control is set. In Attack mode the speed is controlled by pick attack and the rate controls the sensitivity; the harder you pick, the faster the rate and vice-versa. The tremolo can be subtle and shimmery or full-on throbbing depending on where the depth control is set. With the depth set to zero, the Night Wire will act like a fixed filter, phase shifter or envelope-controlled filter depending on which mode the filter frequency is in. It also features a cut/boost volume control to get your levels just right.

Controls:
1. Depth: Adjusts the depth of the tremolo. More clockwise, less counterclockwise. When fully counterclockwise, the amplitude modulation will be removed and the Night Wire will function as a fixed filter, envelope controlled filter or phaser depending on where the Frequency toggle is set.

2. Rate Toggle: This toggle lets you select between two ways to control the speed of the tremolo. Attack lets you adjust the speed by pick attack. In this mode, the Rate knob controls the sensitivity of the dynamic tremolo. The higher the rate and harder you pick, the faster the speed will rise and vice versa. In Manual mode, the Rate control adjusts the speed like a common tremolo.

3. Rate: In Manual mode, this controls the speed of the tremolo. Faster speed clockwise and slower speed counterclockwise. In Attack mode, this controls the sensitivity of the dynamic tremolo. The higher the Rate and harder you pick, the faster the speed will rise and vice versa.

4. Level: Sets the output level, unity is around noon.

5. Frequency Toggle: This toggle lets you select one of 3 different ways to control the center frequency of the filter section. In LFO mode, the frequency is continuously swept by an LFO. In this mode, the Frequency knobs adjusts the speed of the LFO. In Manual mode, the frequency is determined by where the Frequency knob is set. In Attack mode, the center frequency is dynamically controlled by pick attack and the Frequency knob adjusts the sensitivity.

6. Frequency: Controls the center frequency of the filters in Manual mode: higher clockwise, lower counterclockwise. In LFO mode this controls the rate of the sweep: faster clockwise and slower counterclockwise. In Attack mode this controls the sensitivity of the envelope: lower Frequency gives slower rise and lower peak, higher Frequency gives faster rise and higher peak. Simple, right?

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 65 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$259.08 SAVE 20%
 1 in stock $208.29
Earth Quaker Devices Organizer V2 Polyphonic Organ Emulator Pedal
Cat: 781694 Rel: 14 Jul 20
 
Organ emulator pedal
Notes: The Organizer is a polyphonic organ emulator designed to mimic the organ tones of yesteryear crossed with the highly unique "Guitorgan". It has a warm and very analog feel with a hint of Leslie warble that is unlike other modern octave shifters. It is simple to dial in and tracks chords as well as single notes perfectly all over the neck on both guitar and bass. Not only can the Organizer be used on strings, it has been widely used on everything from vocals and synths to horns and drums. If it makes sound, the Organizer can handle it! The Organizer uses a mix of analog and DSP circuitry with true bypass switching and an all analog dry signal path.

Controls:
1. Up: Level control for the octave up.

2. Down: Level control for the octave down.

3. Choir: This control takes a mix of the octave Up and octave Down setting and regenerates it. The end result is an additional 2 octaves up, 2 octaves down and direct signal with a slight delay that adds a "church organ" like feel. This control only works if the octave Up and octave Down are in use.

4. Lag: Delay control for the wet signal. Full counterclockwise is minimal delay. Delay time increases as it rotates clockwise.

5. Tone: Rolls off the high end as you dial it counterclockwise.

6. Direct: Level control for the analog dry signal.

Tech Specs:
Switching
This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 81 mA
Input Impedance: 1 MO
Output Impedance: 500 O
Read more
MRP:$253.87 SAVE 26%
 1 in stock $186.60
Earth Quaker Devices Palisades V2 Mega Ultimate Overdrive Pedal
Cat: 781697 Rel: 14 Jul 20
 
Overdrive pedal
Notes: After loads of requests, for an overdrive based on the legendary TS808, Earth Quaker Devices finally buckled. Tests were ran with every popular clone on the market as well as several vintage originals, compared, contrasted and took loads of notes. It was exhausting but informative. In the end, Earth Quaker Devices used their ears and came up with the most versatile relative of the 808 available today.

With 6 different clipping voices, 5 bandwidth settings and 2 gain channels, you will be hard-pressed to not find a setting that will wipe every mid-boosting overdrive off your board. The Palisades is a versatile dude that will give you years of loving companionship.

Controls:
1. Boost: Sets the level of the output boost.

2. Gain A: Sets the gain for the Channel A (lower gain)

3. Volume: Sets the output level.

4. Gain B: Sets the gain for Channel B (higher gain)

5. Tone: Brighter clockwise, warmer counterclockwise.

Rotary Switches

6. Voice: This sets the nature of the Palisades distortion by changing the clipping diodes.

No diodes: The most open and least distorted.

LED clipping: Light clipping with a lot of volume.

Mosfet clipping: Light gain OD with great harmonics.

Asymmetrical Silicon clipping: Tighter light gain OD closest to stock 808.

Symmetrical silicon clipping: Tighter distorted tone.

Schottky Diode clipping: Looser fuzzy tone.

7. Bandwidth: This sets the overall tone and gain structure of the Palisades. 1 is the thinnest setting with the least amount of gain and 5 is the fattest setting with the heaviest gain. Everything else is in between. This control has a major effect on all the settings of the Palisades, especially the Gain and Voice controls.

Toggle Switches

8. Normal/Bright: Normal is a warm full tone. Bright is livelier tone with more chime.

9. Buffer: Turns the input buffer on or off. ON is a tighter and brighter tone while OFF is a warmer tone with more sag. The buffer is part of the drive circuit & is only available when the Palisades is activated.

Foot Switches

10. Boost: Activates the output level boost, Features Flexi-Switching.

11. Gain B: Activates Gain Channel B, Features Flexi-Switching.

12. Activate: True bypass switch

Tech Specs:
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!

Dimensions: 4.75 x 5.65 x 2.25 in. (121 x 144 x 57 mm) with knobs
Current Draw: 25 mA
Input Impedance: 500 kO
Output Impedance: <10 kO
Read more
MRP:$324.17 SAVE 30%
 1 in stock $227.52
Earth Quaker Devices Park Fuzz Sounds Vintage Germanium Fuzz Pedal
Cat: 781700 Rel: 14 Jul 20
 
Fuzz pedal
Notes: Park Amplifiers and Earth Quaker Devices have teamed up to bring you a faithful recreation of the original Park Fuzz Sound! While it retains the original sounds, there are several modern upgrades to improve performance, reduce extraneous background noise and add versatility:

Metal film resistors and caps for quieter performance.

NOS matched germanium transistors for consistent, reliable tones

Wider fuzz range, more than twice the original

Smaller footprint, true bypass switching with LED indication and power supply compatible

Controls:
1. Volume: This is the level control, louder to the right, quieter to the left.

2. Treble/Bass: This is the tone control, thicker tones to the right, brighter to the left.

3. Fuzz: This is the gain control, more fuzz to the right, less to the left.

Tech Specs:
This device can be powered by a standard 9 volt DC power supply intended for musical instruments with a negative center 2.1mm barrel or a 9v battery. Even though this pedal is a germanium fuzz, it will play nice on a daisy chain due to it's internal voltage regulation.

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 3 mA
Input Impedance: 100 kO
Output Impedance: <1 kO
Read more
MRP:$259.08 SAVE 23%
 1 in stock $199.62
Earth Quaker Devices Plumes	 Small Signal Shredder Overdrive Pedal
Cat: 781709 Rel: 28 Jul 20
 
Overdrive pedal
Notes: Plumesr is a unique, all-analog approach to a classic tube-like overdrive circuit offering 3 different clipping voices, loads of headroom and almost three-dimensional clarity that will push your amp over the edge. The reimagined tone control is finely tuned to sculpt low end, clear top end, and focus midrange with blooming sustain.

Controls:
1. Level: This controls the output volume.

2. Gain: This controls the amount of drive.

3. Tone: More bass to the left, more middles in the middle and more treble to the right.

4. Clipping Modes (3-Way Toggle):

1. Symmetrical LED clipping - More Crunch and Compression.

2. No clipping - Wide open OpAmp drive for clean boost.

3. Asymmetrical silicon diode clipping - More transparency with a loose feel.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 25 mA
Input Impedance: 10 MO
Output Impedance: 100 O
Read more
MRP:$136.70 SAVE 22%
 1 in stock $106.31
Earth Quaker Devices Pyramids Stereo Flanging Device Pedal
Cat: 781712 Rel: 28 Jul 20
 
Flanger pedal
Notes: Pyramids is a Stereo Flanging Device with five presets, eight flanger modes, tap tempo, tap subdivision, a multifunction Modify control, positive and negative Feedback, and a variable Mix control, which is something you don't see on a flanger every day.

Built upon the same proprietary DSP architecture as the Avalanche Run™, Pyramids delivers convincing jet-engine roar, authentic through-zero tape-style warble, infinite barber pole sweeps, flexible I/O routing, and the ability to re-trigger the LFO cycle via footswitch opens up a fourth dimension of rhythmic possibilities that's sure to tickle your third ear.

Controls:
1. Manual: Controls the delay time of the modulated signal. Manual can also be controlled via expression pedal.

2. Rate: Controls the speed of the LFO as well as the rise time in Trigger Up mode and fall time in Trigger Down mode. The Rate control has three ranges of operation: Slow, Normal and Fast. These modes are selected by the Rate & Tap toggle switch.

3. Width: Controls the frequency range of the LFO sweep. You might also think of it as a depth control for the LFO.

4. Mix: This is the volume control for the modulated signal. The modulated signal gets louder when you turn it clockwise and quieter when you turn it counterclockwise.

5. Activate Footswitch: The activate switch features our Flexi-Switch technology! This relay-based true-bypass switch allows for momentary or latching operation.

6. Feedback: Regeneration control for the modulated signal.

7. Rate & Tap Toggle Switch: Normal (center position) is 1:1. The tempo you tap in is the tempo Pyramids will spit out. When set to Slow (left position), the tempo you tap is divided for a slower sweep. When set to Fast (right position), the tempo you tap is multiplied and delivers a faster sweep.

8. Modify: The behavior of this control depends upon which mode you're using:

Classic: Tone control for the modulated signal. Clockwise cuts the low end and allows the high frequencies to pass through. Counterclockwise cuts the high end and allows bass frequencies to pass through.

Through-Zero: Delay time for the unmodulated dry signal. This controls where in the LFO cycle the through-zero point occurs, which is where you'll hear the most drastic cancellation.

Barber Pole Up: Tone control for the modulated signal. Clockwise from center is a high pass filter. Counterclockwise from center is a low pass filter.

Barber Pole Down: Tone control for the modulated signal. Clockwise from center is a high pass filter. Counterclockwise from center is a low pass filter.

Trigger Up: Sensitivity control for the sweep. This controls how quickly the re-triggering reacts to your pick attack.

Trigger Down: Sensitivity control for the sweep. This controls how quickly the re-triggering reacts to your pick attack.

Step: Adjusts the glide between steps. Low Modify settings produce sharp, stair-stepped transitions between steps. Higher Modify settings introduce a smoother glissando effect.

Random: Adjusts the glide between steps. Low Modify settings produce sharp, stair-stepped transitions between steps. Higher Modify settings introduce a smoother glissando effect.

9. Tap / Trigger Footswitch: In Classic, Through-Zero, Barber Pole Up, Barber Pole Down, Step, and Random modes, this footswitch is a tap tempo control. In Trigger Up and Trigger Down modes, this footswitch triggers the effect whenever it is pressed.

10. Presets Rotary Switch: Selects between Live mode and one of five presets. Pyramids comes with our favorites programmed in, but you're allowed to re-write them if you want. We don't mind.

11. Mode Rotary Switch: Selects between Pyramids' eight flanger modes

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

For best results, please use the included 9v center-negative 1-amp DC power supply.

To use with multiple output transformer-balanced isolated pedal-specific power supplies, Pyramids' may be powered from two outlets combined using a current-doubling cable. DO NOT USE A VOLTAGE-DOUBLING CABLE BECAUSE THAT WILL SEND 18V TO PYRAMIDS AND FRY IT LIKE AN OVEREASY EGG AT A GREAZY SPOON DINER.

Dimensions: 4.65 x 4.15 x 2.25 in. (118 x 105 x 57 mm) with knobs
Current Draw: 460 mA
Input Impedance: 1 MO
Output Impedance: 100 O
Read more
MRP:$436.14 SAVE 30%
 1 in stock $304.79
Earth Quaker Devices Rainbow Machine V2 Polyphonic Pitch Mesmerizer Pedal
Cat: 781717 Rel: 23 Jul 20
 
Pitch mesmerizer pedal
Notes: Welcome to the Rainbow Machine, in all its synthetic glory! This one is for experimenters, adventurists, and noisemakers. Totally not for purists and/or tone hounds. There are no natural sounds that come from this box. It takes modern DSP and uses it as a tool of future past to create real-time pitch shifting using digital oscillators.

Controls:
The Rainbow Machine has been completely re-imagineered from the pixie dust-covered ground up to be more versatile, twice as loud as the original, with an extended delay time, deeper chorus tones, silent flexiswitch footswitches on both the Activate (1) and Magic (2) functions, and most of all, more Magic.

The Rainbow Machine is built around a DSP pitch warping engine that's designed to be slightly imperfect; colored with digital remnants of the cosmic dust we've picked up across the multiverse. That is to say it's a cold digital beast made to pretend it has feelings.

The Pitch (3) control adjusts the frequency of the polyphonic pitch-warped harmony from a fourth below your input, to a third above, and every atonal pitch in-between. Noon is the unison position. Pitch may also be controlled via expression pedal. Use the Primary (4) function control to adjust the volume of the polyphonic harmony.

[Pro Tip: With the Pitch control set to noon, the Rainbow Machine acts as a chorus. Use the Primary control to adjust the wet signal volume and select the delay time with the Tracking control. The tracking improves as this control is increased, so turn it up for tighter tracking with a shorter delay time or turn it down for longer delays and more ambience.]

The Tracking (5) control adjusts the lag time between the wet and dry signals. Tone (6) rolls off some treble for a darker, vintage sound. Clockwise Tone settings are bright, counterclockwise is dark.

The Secondary (7) control adds an octave of the Primary harmony. When the Pitch control is above noon, Secondary adds an octave above the harmony. When the Pitch control is below noon, the Secondary control will add one octave below the harmony. With the Pitch set to noon, the Secondary control adds an additional chorus voice for modulated, triple-tracked tones. Use this control to blend in faux-shimmer sounds or a low-frequency rumble. It's up to you. From there, it's only a matter of how weird you wanna get.

And you can choose how weird you get with the Magic (8) control. This is a regeneration control that creates aliasing (among other things) by feeding the Primary and Secondary signals back on themselves and each other, and a bunch of other stuff no one understands.

With the Magic engaged and the control set low, you can squeeze a few extra repeats out of whatever setting you happen to be using. As you increase the Magic control, you'll start noticing increased ambience, resonant, edge-of-oscillation pitch-shifting delays, chorus, metallic digi-flanging, ascending (or descending) pixie trails, controllable self-oscillation, squalls of synthetic noise, whale song, and finally, distortion. It'll take you way beyond and open up your third eye, trust us. In conjunction with the Tracking control, the Magic creates wild pitch take offs and descends, chaos chorusing, shrieks, groans, gurgles, wizard-blessed wizardry, signal transformation, imminent destruction, and other general mayhem.

Maybe you only wanna get weird for a second? Okay, with the Rainbow Machine engaged, hold down the Magic footswitch, get weird, and then let go to return to your boring, old Magic-less guitar tone. Or, press the switch like normal, and the Magic remains engaged until you press the switch again. Ditto for the Activate switch. Press and hold to use the Rainbow Machine as a momentary effect, then let go to bypass; or feel free to press the switch like normal and use the Rainbow Machine like you would any other effects pedal.

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.65 x 3.65 x 2.25 in. (118 x 93 x 57 mm) with knobs
Current Draw: 68 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$298.14 SAVE 28%
 2 in stock $214.80
Earth Quaker Devices Sea Machine V3 Super Chorus Pedal
Cat: 781720 Rel: 14 Jul 20
 
Chorus pedal
Notes: The Sea Machine is a chorus pedal with as many modulation possibilities as there are fish in the ocean. That's a lot of fish. And a lot of modulation. From subtle, shimmery chorus sounds, to wobbly, seasick, warbly pitch-bent detuning that rocks the boat, the Sea Machine is the audio bait that'll help you reel in the big one.

The Sea Machine ain't no one-trick seahorse. With a mix of standard and unique controls, everything from subtle warble, classic Leslie, seasick pitch bends, strangled alien sounds, stunted arpeggiations and many more far out sounds are available. Or you could just use it as a chorus. That works, too. Oh, and if you're a bass player who fancies themselves a fan of the classic 80s post-punk bass sound, the Sea Machine is pretty much just like (tone) heaven.

Controls:
1. Animate: How far the pitch shifted signal swings, lower levels equals a tighter and more focused shift a la traditional chorus. As you increase the control a more wild and animated pitch shift begins to emerge.

2. Dimension: Adds a slight slap-back at low levels, reverb-like ambiance at mid levels and an echo-resonance that will lead to self-oscillation at max.

3. Intensity: Adjusts how much modulated signal is blended in with the dry signal. Unity for this control is right around noon, everything above that is boosting the modulated signal.

4. Depth: Adjusts how strongly the LFO modulates the delay time.

5. Shape: Goes from triangle wave to square wave as you turn clockwise.

6. Rate: This sets the speed of the LFO. The miniature LED will blink to the tempo, even in bypass mode.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 40 mA
Input Impedance: 10 kO
Output Impedance: <1 kO
Read more
MRP:$259.08 SAVE 27%
 1 in stock $187.98
Earth Quaker Devices Space Spiral V2 Modulated Delay Device Pedal
Cat: 781722 Rel: 28 Jul 20
 
Delay pedal
Notes: The Space Spiral is a dark and dreamy modulated delay designed to take you across the highways of fantasy. While the delay may be designed around a "dawn of digital" echo processor, the sound is out of this world, man. If you are a fan of the dreary echoes produced by old oil can delays or the ethereal sound of a well-loved tape delay, the Space Spiral is totally going to tickle your tone bone.

The Space Spiral's delay time ranges from a tight 30ms to a fast and loose 600ms. Can you imagine having 600ms of delay time at your fingertips? Out of this world! With all of this adjustable delay time you create anything from a classic slapback to a rhythmic wash of cosmic proportions. You want to take it even further? Maybe to an astral plane? Crank up the repeats and let the infinite oscillation of the Space Spiral take you to the other side.

Space Spiral- It'll get you through the night.

Controls:
1. Time: Delay time goes from 30ms to 600ms; Clockwise for long and counterclockwise for short.

2. Repeats: Controls the regeneration of the delay signal. Repeats increase clockwise and gradually begin to build into self-oscillation around 3 o'clock. This oscillation will infinitely continue until the Repeats control is brought back down below the 3 o'clock threshold. These oscillations will last even when the pedal is in bypass mode.

3. Mix: Blends the delay signal in with the dry; Clockwise for more and counterclockwise for less.

4. Depth: Controls the desired amount of modulation; Clockwise for more and counterclockwise for less.

5. Shape: Morphs the wave shape from a soothing triangle shape to a choppy square shape as you turn clockwise.

6. Rate: Controls the speed of the modulation; Clockwise for fast and counterclockwise for short.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 38 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$259.08 SAVE 21%
 1 in stock $203.96
Earth Quaker Devices Spatial Delivery V2  Envelope Filter With Sample & Hold Pedal
Cat: 781724 Rel: 28 Jul 20
 
Envelope filter pedal with sample & hold module
Notes: The Spatial Delivery is an oddball, a voltage controlled envelope filter that allows you to step outside the universe of funk while reinforcing your secret love affair with auto-wah. It has 3 modes: Up Sweep, Down Sweep and Sample and Hold.

With Range, Resonance and Filter controls you can get super emphasized filter sweeps in the Up and Down modes. The Range, in combination with pick attack, controls the sensitivity and reaction time of the envelope and thus the width of the frequency sweep. The higher the Range and harder the attack equals a faster reaction time and higher frequency sweep and vice versa. Reign in the controls a bit, add your favorite overdrive/fuzz after the Spatial Delivery and you've got a real nice resonant, cut-through-the-mix lead tone. Crank the controls back up and you're a neo-bedroom rock god. In the Sample and Hold mode the filter is controlled by random voltage and the Range controls the speed. Add a sub octave into the mix (before or after) and you've just created a deep fried space droid computer freak-out. The filter can be cross faded between high pass (counterclockwise), band pass (center) and low pass (clockwise) for a wide variety of voices. The Resonance control goes from zero to the brink of oscillation and adds more body and ring to the filter voice.

Controls:
1. Range: Adjusts the sensitivity of the envelope in Up and Down mode. In Sample and Hold mode, this controls the speed.

2. Mode Toggle: This toggles between Upward Sweep, Downward Sweep or Sample and Hold.

3. Resonance: This is the filter feedback control, it adds more body and ring to the filter voice.

4. Filter: This crossfades between high pass and low pass filters and allows you to get everything in between. High pass is fully counterclockwise, low pass is full clockwise and center is band pass. This is much more useful than a simple switch because it allows you to blend the filters for different sounds!

Suggested Placement
We recommend placing the Spatial Delivery first in your signal chain. However, due to its envelope control, experimenting with pairing and signal chain placement can take the potential of the Spatial Delivery even further.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 68 mA
Input Impedance: 500 kO
Output Impedance: <1 kO
Read more
MRP:$266.89 SAVE 20%
 2 in stock $214.80
Click for better price!
or call +44 20 7424 1960
quote 781724
Artículos del 1 al 50 de 408 en la página 1 de 9
1  2  3  4  5  6  7  8  9  »

Filter

Effects pedals
Accesorios
Release Date
Close