Effects pedals

Notes: The Seabee is a multi-chorus pedal that delivers the finest analogue bucket brigade chorus tones, but like any Beetronics, it goes a few steps further. By digitally controlling the chorus delay time, the Bees have created Harmochorus - a never-before-heard pitch shifting modulation that can certainly inspire new genres.

Three Chorus modes provide the classic, lush chorus and vibe sounds we all love, with each mode offering the ability to control the effect in different ways. Vary between two different speeds and/or depths, go from zero to full depth intensity, or even increase the chorus delay time for a whole new spectrum of sounds.

Three Harmochorus modes give you a unique and inspiring new approach to the effect. The easiest way to explain it's that, when clean, it sounds like angel bees are accompanying you, and when paired with some buzz, it sounds like a swarm of killer bees producing the most dangerous pitch shifting modulation are after you! You can choose between two different pitches and speeds, a combination of twelve chords and twelve different arpeggio patterns, or simply choose between thousands of random patterns.

No matter which mode you choose, the Seabee will navigate you to inspiring and creative places.

Its simple layout with only three knobs hides a multitude of possibilities with alternate controls, three ramp shapes, tap tempo, a 4-way tone filter, feedback control, and a rate that ranges from very slow to ultra-fast waves, even reaching ring modulator ranges.

There are two stereo output options, 16 onboard presets, full MIDI control, expression in, external tap and 4 input level options so you can process guitar, bass, all kinds of active pickups or synthesizers and still keep the bucket brigade in its sweetest spot?

It's hard to believe that an analogue chorus can be so complete, versatile, unique and intense - all at the same time. But get ready, because Tone Fishing is about to beecome a thing.

Analogue sound path with the finest bucket brigade chorus tones.
3 Chorus modes / 3 Harmochorus modes
Never before heard pitch shifting chorus with arpeggios and random patterns.
Truly expressive ramping gives you musical control.
16 Onboard presets, Tap Tempo, MIDI, Expression and more.
Selectable input level (supports guitar, bass, active pickups, synthesizers and more)
Hand-assembled in Los Angeles, CA.

Packaging Dimensions: 15.2 x 13.7 x 7.6 cm
Weight: 0.49 kg

Notes: Simply sophisticated

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit internal processing and offer support for external control via footswitches, an expression pedal, or MIDI.

The OD-200 Hybrid Drive brings next-level sound, feel, and flexibility to overdrive and distortion, combining decades of BOSS tone expertise with innovative technologies. Powered by hybrid analogue/digital circuitry, this dream pedal delivers any drive tone you can imagine via 12 primary modes, 15 boost types, series/parallel gain paths, and more. There's even an advanced gate on board, ideal for both eliminating noise and adding tightness to high-gain drive tones.

Version 1.1 Update: User Memory Expansion

The free Version 1.1 software update brings increased flexibility to the BOSS 200 series, greatly expanding the onboard memory capacity for storing and recalling sounds. There are now 128 user setups available. Setups can also be recalled directly via MIDI program change.

For optimal performance, stay up to date with the current OD-200 system software

Premium Drive Tones with BOSS's Advanced Hybrid Design

The OD-200's next-generation hybrid design seamlessly brings analogue and digital clipping circuits together for the best of all worlds, putting a universe of expressive drive colours under your fingers. Twelve modes offer a variety of premium overdrive, fuzz, and distortion sounds, including a high-gain Brown mode derived from the acclaimed Katana amplifier series. And with the three high-performance "X" drive modes powered by BOSS's cutting-edge MDP tech, you'll experience enhanced definition, clarity, and dynamic response that's perfect for modern playing styles.

Powerful Gain Shaping with Series and Parallel Boosts

While each of the OD-200's 12 main drive modes sound fantastic on their own, you're able to craft tones even further with 15 switchable boost circuits. Placing the boost in series lets you create traditional stacked drive voices, complete with post-gain level to balance with the bypassed sound or kick up the volume for solos. The boost circuit can also be used in parallel with the main mode, enabling side-by-side blending for an unlimited range of unique drive textures.

Kill the Noise and Tighten Your Tone

With its integrated gate circuit, the OD-200 always keeps your signal clear and quiet when you're not playing. The default setting is a great starting point, providing gentle, transparent gating that works well for general playing styles. The decay and threshold controls can also be adjusted for super-fast gate performance when needed, perfect for bringing tightness to heavy modern styles that combine full-throttle gain with precision staccato riffing.

Dial in Sounds Fast

The OD-200 offers a ton of advanced capabilities, but remains as simple to use as any regular distortion stomp. With dedicated controls, you can quickly dial in the gain and overall level for any selected mode, then sculpt the tone with wide-ranging low, mid, and high EQ. There's also a multi-function parameter knob, which changes operation based on the group selected with the panel's parameter switch and LED status indicators.

Save and Recall Your Favourite Setups

The OD-200 features 127 user memories plus a real-time panel setting, giving you 128 total setups to choose from. Any range of consecutive memories and the panel setting can be assigned for scrolling access from a footswitch. It's also possible to limit the scrolling range or assign memories directly for even faster recall.

Specifications

Sampling Frequency: 96 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point
Drive Circuit: Analogue + Digital

Modes:
12 modes
OVERDRIVE, BLUES, SCREAM, CNTR OD, X-DRIVE, DIST, X-DIST, STACK DRIVE, FAT DIST, BROWN, X-METAL, FUZZ

Memory: 127 + Manual
Nominal Input Level: INPUT: -10 dBu
Maximum Input Level: INPUT: +7 dBu
Input Impedance: INPUT: 1 M ohm
Nominal Output Level: OUTPUT: -10 dBu
Maximum Output Level: OUTPUT: +7 dBu (Load Impedance: 220 k ohms or greater)
Output Impedance: OUTPUT: 1 k ohms
Recommended Load Impedance: OUTPUT: 10 k ohms or greater
Bypass: Buffered bypass

Controls: ON/OFF switch, MEMORY/BOOST switch
MODE knob, DRIVE knob, LEVEL knob, PARAM knob, LOW knob, MIDDLE knob, HIGH knob
PARAM button, MEMORY button
Display: 7 segments, 3 characters (LED)
Indicator: PARAM indicator, MEMORY (MAN, 1--4) indicators

Connectors:
INPUT jack, OUTPUT jack: 1/4-inch phone type
CTL 1, 2/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack
USB port: USB micro B-type (program update only)

Power Supply: Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately)
Current Draw: 220 mA

Expected Battery Life Under Continuous Use:
Alkaline: Approx. 6 Hours
* These figures will vary depending on the actual conditions of use.

Accessories:

Leaflet "USING THE UNIT SAFELY"
Leaflet "To obtain the Owner's Manual"
Alkaline battery (AA, LR6) x 3
Rubber foot x 4

Options (sold separately):
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight:

Width: 101 mm / 4 inches
Depth: 138 mm / 5-7/16 inches
Height: 63 mm / 2-1/2 inches
Height: (including rubber foot)65 mm / 2-9/16 inches
Weight: 600 g / 1 lb 6 oz
Weight (including battery): 670 g / 1 lb 8 oz

Notes: Memphis Vibrato was designed as the "small brother" of Crazy Tube Circuits' Killer V- this was born out of high demand for a true pitch shifting amp-like vibrato pedal, without the drive section.

It features all analogue LFO and true-to-the-original-amp 2-stage pitch shifting circuit powered from an internal voltage multiplier for high headroom and improved dynamic response. A clean period correct preamp with up to 20db boost takes you back to the late 50s / early 60s.

With the intensity and speed knobs you can add a subtle shimmer , or a pronounced 3D acoustic image and musical feel with ear- pleasing vibrato effect for instant classic Lonnie Mack / Robert Ward sounds!

ALL WET - DRY / WET toggle switch selects between 100% modulated signal or places the dry unmodulated signal in parallel with the modulated signal. The latter setup was found in some of the original amps through "stereo" inputs and yields whirling phaser / vibe sounds.

Notes: Inspired by the first digital delay rack units introduced at the beginning of the "digital audio revolution" in the mid-late 70's. These units had lower bit resolution and bandwidth compared to today's digital delay standards.

TI:ME is not your typical sterile and ultra clean digital delay. With separate analogue and digital paths to get best of both worlds, this retro inspired echo effect will warm up your tone. An all analogue signal path featuring a high quality opamp is used for the best reproduction of your dry signal. Two digital recording devices, along with carefully tuned filtering, placed in parallel with the dry path give you the most ambient delay unit you have ever heard. Think of a Model 113 rack unit; the repeats are really musical, reminiscent of worn tape echoes.

Each TI:ME unit is hand lacquered in copper colour and one of a kind!

Notes: Seeking to recreate the sounds of the Klon Centaur overdrive pedal and Dumble guitar amps, the Crazy Tube Unobtanium combines the holy grails of germanium diodes and all-analogue amp-in-a-box tone. Incredible value.

Supplier's Notes:
Introducing the Unobtanium, a rare sonic element born out of legendary tones.

A mythical overdrive meets the tone and feel of two iconic amplifiers. Crazy Tube Circuits have accurately recreated the circuit of the high headroom overdrive with the magic blend of clean and overdriven tones and added extra features for versatility. The amp-in-a-box section uses an all-analogue circuit to capture the essence of two legendary D-style tube amplifiers. From tube-like compressed fat clean to sweet singing overdrive with blooming harmonic overtones. Combine both sides for near infinite smooth sustain and enter sonic bliss while a passive series effects loop gives you the option to connect your beloved pedals between the overdrive and amp section, building your ideal rig

Right side: K-style pedal overdrive circuit including the fabled germanium diodes
Controls: gain, treble (tone), volume, bypass mode and clipping / compression
Wide gain range control: from transparent boost to high headroom overdrive
Treble control is an active circuit to boost or cut treble
Volume knob sets overall output. Huge amount of dB boost available
Toggle switch to select between the original buffer bypass to add clarity and run long cables or
true bypass
Toggle switch to select between stock clipping / compression or enhanced gain and
headroom/output

Left side: D-style Amp in a box overdrive
Controls: gain, emphasis, tone, volume, amplifier voicing toggle
Gain control: from clean boost to sweet singing overdrive
Emphasis control is a pre-drive EQ to control presence and bottom end response
Tone knob controls the amount of post overdrive high end frequencies
Volume knob sets overall output. Match bypassed volume or use as a clean boost or preamp
Toggle switch selects between 2 distinct D-style overdrive circuits
SSS: clean and transparent overdrive with natural organic compression
ODS: higher gain overdrive with enhanced mid frequencies and harmonic overtones
External footswitch input to select amplifier voicing (bypasses on board toggle switch)
Internal trimmers adjust EQ and volume boost of D-style overdrive voicings

Features:

Dual overdrive with independent operation
Two legendary sonic elements combined in one device
Passive series effects loop to connect other pedals between the two sections or use them separately
Runs internally at 18V DC for higher headroom and tube-like performance
Exceptional pick attack response - almost infinite smooth sustain when both sides are combined
Top mounted jacks
Click-less True Bypass design via high quality relay
Power Supply: Use only 9V DC center negative power supply (not included)
Current consumption 83mA
Pebble grey die-cast enclosure with black ink in old school type print
Made in Greece

Notes: Envelope with filter with serious attitude

This mangled, filter-sweeping, abruptly overdriving pedal is designed to respond to your playing. It syncs its wave-thumping movement with the force at which you play. It multiplies dynamics into a hyper-exaggerated frenzy. It adds just the right amount of movement to punch through the mix and it reacts to an external trigger of your choosing to follow your tempo. Six selectable frequency ranges mean you're always gonna have just the right quack and oomph for whatever's plugged in! The sounds are wild, the thump is thick, and the animation is deep.

Controls

Input: Plug an instrument in to this jack.
Trig: Plug another instrument in to this jack and use it to trigger the filter sweep.
Out: Connect this to the amplifier.
Sensitivity: Determines the point at which the filter engages and the frequency range of the filter shift in relation to the input amplitude.
Intensity: Simultaneously blends in the resonance, amount, and grit of the filter.
Vol: Adjusts the output volume of the DEEP ANIMATION.
Frequency Selector: Selects the frequency range of the filter.
Bypass: True bypass the effect.
Up / Down: Controls the polarity of the filter decay once triggered. UP sweeps the frequency from higher frequencies to lower ones and DOWN, the opposite.
Additional Features: There is a subtle light to indicate the external trigger behind the main bypass LED.

Specifications

Dimensions: 5.92" x 4.72" x 2.34" (including hardware).
Weight: 21 oz.
Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery).
Current Draw: 18 mA.

Notes: The DISTURBANCE is an extreme filter, flanger, and phaser with modulation like you've never heard before.

DISTURBANCE's controls allow for a wide range of sounds to be sculpted perfectly to your needs. The 'Tensity' knob changes the feedback amount and structure of all effects, with two totally different intensity options to choose from for each disturbing modulation. The Filter allows for deep swells and piercing resonance with highpass and lowpass options.

The Flanger creates a classic modulation sound with options for watery, multi-tap delay matrixes or a screaming flange with distorted feedback. Last but certainly not least, the Phazer mode is a psychedelic 8-stage phaser sound with options for mellow filtered scoops on one side and combination phaser/flanger on the other.

But that's not all - the pedal introduces a brand-new way to control an effect: The custom designed modulation core lets you pause the LFO where it stands and listen to the strange world of frozen modulation. Not only does this new system control its own sounds, the DISTURBANCE includes a CV OUT jack which lets the modulation control signal be sent to whatever device dares let it in.

Go forth and DISTURB and bend, break, and twist your sound!

Notes: An 'otherworldly' take on the classic delay pedal from Death By Audio, with the addition of a fuzz circuit allowing you to dial in grit and texture as well as ethereal atmospheres with shimmering feedback.

Supplier notes:
Lush Modulating Echo

A powerful, ethereal, and nuanced delay pedal with otherworldly controls. Push the feedback for vast worlds of colourful sound. Introduce a bit of warble with the modulator for ghastly chorus tones, or a ton of it to absolutely warp the delayed signal. Once your delay is thoroughly contorted, turn up the fuzz and pulverize it into repeating, shattered pieces. This is the preferred echo for recording engineers and touring pros around the world because, simply put, it just sounds that good. From delicate, beautiful sounds to yawning voids of fuzz and feedback, the Echo Dream II is ready to transform anything you throw at it.

Controls

Master: Sets the overall volume.
Fuzz: Sets the amount of gain, from clean to fuzzed-out bliss.
Delay: Sets the volume of the delayed signal.
D Time: Controls the delay time (numbers shown in milliseconds) between 20 ms and 1 second. Long delay times can create flutter, noise, and distortion.
FBack: Controls the feedback of the delays, from slapback to wild runaway oscillation.
Left Toggle: Up for clean blend, down to kill the dry signal and hear only the repeats.
Speed: Controls how fast the modulator runs.
Depth: Sets how far the modulator will swing the delay time. At high intervals, the pitch of the repeats will shift several semitones!
Right Toggle: Up for a smoother modulator waveform, down for a sharp, square-shaped wave.

Specifications

Dimensions: 5.87" x 4.72" x 2.35" (including hardware).
Weight: 21 oz.
Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery).
Current Draw: 40 mA.

Notes: Psychdelic Vocal Trip

Designed for vocals, the Echo Master is a lo-fi, analogue tape-style delay unit that can transform your voice into a chaotic realm of noise and feedback. The effects loop allows additional effects to be placed in the signal chain, making it easy to use with any of your favourite effects pedals on your vocal sound without any adapters.

The Echo Master is not just a delay unit, however. It utilizes matched Bourns transformers on the input to create a vibrant-sounding and feedback-minimizing preamp to bring you phenomenal vocal quality before you even hit the PA. Your sound engineer will hate you because you'll sound better than ever without their help. Top it off with high-quality Neutrik XLR jacks and the Echo Master is the ultimate tool for taking total control of the sound of your voice.

Controls

Time: Controls the delay time, with numbers labelled in milliseconds. In the Red Zone, the delay chip is pushed to the extreme. The signal decreases in fidelity as the time increases.

F-Back: Controls the number of repeats in the delay circuit, anywhere from one to an infinite to a wall of oscillation.

Mix: Controls the level of the delayed channel in comparison to the dry signal, from fully dry to an equal mix.

Send/Receive: Plug out of the Send jack into any additional effects, then back into the Return jack to introduce new sounds into your vocals. This loop is before the delay line, allowing you to affect your dry vocals as well as the delay generated by the Echo Master.

*Alternate Backplate: Back in stock baby! The Echo Master can also be purchased with a backplate that mounts to your mic stand. Puts the pedal within hands reach to maximize live performance tweak-ability. This recently upgraded V3, comes with a handgrip screw for more torque (although it resembles the V1, this is a much sturdier model). **Please note- cords, microphone, and stand are not included.

Specifications

Dimensions: 6.09" x 3.45" x 2.75" (including hardware).
Weight: 16oz. (w/ Alternate Back Plate 30oz.)
Power: 9V (runs on standard 2.1mm negative center 9V adapter).
Current Draw: 25 mA.

Notes: For the truly wild

Psycho multimode filter with an ultra-sleek, laser-etched enclosure. Its medical-grade IC chip creates a hyper-precise filter that sounds like no other. With high pass, bandpass, and low pass modes, as well as two types of screaming resonance, the Evil Filter is ready to saw any sound into pieces - or just be the most insane wah you've ever heard. The Evil Filter's two fuzzes take signals into a much more twisted dimension, creating a blooming compression that's perfect for ripping solos and walls of noise alike. Push it past the limit into octaves up, down, and snarling wavefolding sounds. Using the CV/Expression input, you can also control the filter cutoff frequency with an expression pedal or synthesizer.

Controls

Filter Freq: Cutoff frequency of the filter. Numbers shown are in Hz.
Filter Output: Volume of the filter section of the pedal.
Filter Selector: Selects between the different filter types - Low Pass Symbol Low Pass, Band Pass Symbol Band Pass, and High Pass Symbol High Pass.
Filter Resonance: Sets the resonance of the filter in conjunction with the Resonance Switch. WARNING: Will self oscillate at high levels!
Resonance Switch: Sets the range of the Filter Resonance knob between Normal and High.
Fuzz Output: Volume of the fuzz section of the pedal.
Fuzz Type Switch: Choose between two different fuzzes - Low Gain Fuzz Symbol lower for a cleaner, more driving fuzz, High Gain Fuzz Symbol higher for a blasted out, blooming, insane fuzz.
EXP/CV Input: Plug in CV control (~0-3.0v) or an expression pedal for external control of the Filter Freq knob. The Filter Freq knob sets the range for the EXP/CV input.

Specifications

Dimensions: 7.75" x 4.72" x 2.4" (including hardware).
Weight: 25 oz.
Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery).
Current Draw: 21 mA.

Notes: The Germanium Filter is Death By Audio's love letter to sticking a pencil in your speaker.

Start with a console-style drive circuit, add in a dash of obsolete germanium transistors and finish it off with a super intense DBA-style filter - BLAMO! You've got a sound heavy enough to crush on and sharp enough to slice a tomato.

The Filter control is extremely unconventional - it'll take you from bottomless, sub-woofered out lows to super searing and brittle highs, with a universe of tone in between. The Germanium Filter will help you find the sweet spot for your instrument in any situation - at a show, in the studio, or even stranded on the side of the highway after your tour van catches fire - hey, it happens!

The Gain knob starts with a dirty boost that then spans through saturated drive, spitting distortion, and a blistering fuzz tone. Get ready for your sound to be cranked up to infinity-and-a-half and captured on tape by the most incredible recording engineer you've ever heard - only there's no engineer and no studio. Just you, your guitar, your amp and the Germanium Filter.

Controls

Filter: Controls the frequency response of the pedal, featuring huge low end, scooped mids, and sharp, piercing highs.

Gain: Sweeps from mild overdrive to blasted-out fuzz. Very interactive with your guitar's volume control.

Volume (internal): Controls the overall output level of the pedal.

Specifications

Dimensions: 5" x 2.5" x 2.25" (including hardware).

Weight: 10.6 oz

Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery).

Current Draw: 5 mA.

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


The Germanium Filter is Death By Audio's love letter to sticking a pencil in your speaker.

Start with a console-style drive circuit, add in a dash of obsolete germanium transistors and finish it off with a super intense DBA-style filter - BLAMO! You've got a sound heavy enough to crush on and sharp enough to slice a tomato.

The Filter control is extremely unconventional - it'll take you from bottomless, sub-woofered out lows to super searing and brittle highs, with a universe of tone in between. The Germanium Filter will help you find the sweet spot for your instrument in any situation - at a show, in the studio, or even stranded on the side of the highway after your tour van catches fire - hey, it happens!

The Gain knob starts with a dirty boost that then spans through saturated drive, spitting distortion, and a blistering fuzz tone. Get ready for your sound to be cranked up to infinity-and-a-half and captured on tape by the most incredible recording engineer you've ever heard - only there's no engineer and no studio. Just you, your guitar, your amp and the Germanium Filter.

Controls

Filter: Controls the frequency response of the pedal, featuring huge low end, scooped mids, and sharp, piercing highs.

Gain: Sweeps from mild overdrive to blasted-out fuzz. Very interactive with your guitar's volume control.

Volume (internal): Controls the overall output level of the pedal.

Specifications

Dimensions: 5" x 2.5" x 2.25" (including hardware).

Weight: 10.6 oz

Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery).

Current Draw: 5 mA.

Notes: Blistering Reverb

The original synthetic atmosphere creator. The Reverberation Machine offers up drippy, saturated spring reverbs and cavernous expanses in one small package. Push the Altitude and hear the reverb blasted with gloom and distorted shimmer for the ultimate wall of sound. An instant classic for a reason, the Reverberation Machine's unique and experimental sounds are equally at home twisting your sound into a galactic nebula or adding a sinister and yearning beauty to anything you plug in.

Controls

Vol: Controls the master output volume.
Altitude Control: This is similar to gain. Turn it up to bring in a more wide open, distorted sound.
Verb: Blends in the amount of reverb.
Dark/Light Symbol: Dark cavernous reverberation to bright shimmering reverberation.

**When the Altitude and Verb controls are turned past 12 o'clock, the pedal can produce potentially harmful volumes, white noise, and other artifacts**

Specifications

Dimensions: 4.86" x 3.67" x 2.06" (including hardware).
Weight: 14 oz.
Power: 9V (runs ons a positive ring, negative tip 9V DC adapter or included 9V battery).
Current Draw: 66 mA

Notes: Ultra-versatile stereo reverb pedal with eight contrasting algorithms for flexibility and character. Expression pedal highly recommended for real-time hands-free modulation.

Supplier's Notes:
Space Reflections

ROOMS is a stereo, multi-function digital reverb capable of searing volume, gated walls of sound, and long, trailing reverberant ambiances with an intuitive array of controls designed with live mood-bending in mind.

ROOMS was designed to the highest standards of flexibility and audio fidelity. A studio-quality mixer section provides independent DRY and FX controls over six meticulously programmed reverb algorithms; ROOM, DIGIT, PEAK, GATE, WAVE, and GONG. Each different verb is capable of a universe of sounds, and ROOMS is here to help you explore them.

ROOMS' creative I/O switching and dual-mono dry signal lines allow for a wealth of possible mono and stereo configurations, making it easy to route signals for parallel processing or stereo amplifier setups.

Controls

FREQ: Controls the frequency parameter of the current mode.

DEPTH: Controls the depth parameter of the current mode.

TIME: Controls the reverb time in all modes.

DRY: Controls the volume of the dry signal, from -inf to 20x gain.

FX: Controls the volume of the reverb signal, from -inf to 20x gain.

ALT: Engages the ALT mode, switching between two sets of controls. When active, FREQ is controlled with the F knob, DEPTH with the D knob, and TIME with the T knob. Additionally, the ALT mode turns on expression control of either FREQ or TIME using the F?T Switch on the side of the pedal. NOTE: Expression control ONLY works in ALT mode and when an expression pedal is plugged in.

Expression Pedal: Almost any expression pedal will work with ROOMS. When not plugged in, the controls work as normal. NOTE: Expression control ONLY controls the F or T knobs when ALT mode is engaged and when an expression pedal is plugged in.

Modes & Parameters

FREQ knob : DEPTH knob

1 - ROOM: Tone of Decay : Pre-Delay
A classic reverb that simulates many different rooms.

2 - DIGIT: Delay Time : Delay Feedback
A filter matrix verb capable of creating otherworldly resonances and fractured repeats.

3 - PEAK: Filter Frequency : Filter Resonance
A super intense bandpass filter combined with an ambient reverb.

4 - GATE: Decay Tone : Gate Response Time
A gated reverb. Short reverb times create a classic gate effect, long reverb times create a controllable freeze effect.

5 - WAVE: Modulation Frequency : Modulation Depth
Creates a pitch vibrato effect. Lowering TIME will blend out the reverb signal, allowing sweeps from chorus/vibrato to long modulated reverbs.

6 - GONG: Modulator Frequency : Blends from Aliasing (left) to Ring Modulation (right)
Ethereal, crushed reverb sounds guaranteed to make you star in the upcoming remake of DUNE and live out your sci-fi fantasies of space travel and galactic domination.

Specifications

Dimensions: 5.95" x 3.86" x 2.96" (including hardware).
Weight: 18 oz.
Power: 80 mA, 9V (runs on a standard 2.1 mm negative center 9V adapter).

Notes: Space Bender

Chorus Modulator

LFO in the UFO

The Space Bender chorus modulator replicates and warps your signal into beautiful and organic transmissions from a dimension somewhere beyond linear time.

Under the hood lies an array of dynamically modulated delay lines allowing you to craft subtle vintage sci-fi sounds, bending sonic bedlam, and pulsing atmospheres. Never again will you say this chorus pedal just isn't intense enough! These in combination with the rocker switch settings let you move smoothly through a wide range of effect types allowing for new ways of thinking and experimenting with modulated delay, chorus, and flanger.

Stretch and pull your sound waves to craft glassy bell resonances, massive reverse dive bombs, and seasick demon drones with a simple (but deep) interface. The spectrum of living, breathing sound manipulations stowed within the Space Bender serves as an interstellar gateway for the next wave of musicians to create a universe of haunting and unexplored soundscapes.

See you on the other side!

Specifications

Dimensions: 5" x 2.63" x 2.45" (including hardware)
Weight: 9.3 oz.
Power: 9V DC (runs on standard 2.1mm negative center 9V DC adapter).
Current Draw: 65 mA.

Notes: The DigiTechr Mosaic Polyphonic 12-String effect pedal sets you upon the path of creating lush 12-string sounds with either 6-string electric or amplified acoustic guitars. Immediately identifiable 12-string tones are now yours with octave low strings and doubled high strings. Single notes and full chordal strums shine with polyphonic richness and celestial movement that will inspire you. The Mosaic's balanced low-end response with crisp octave shimmer produces a tone that's lush and articulate, just as with a 12-string guitar.

Tailor the Mosaic's sound with the independent Level and Tone controls. Level will control the 12-string effect intensity while Tone shapes the overall brightness of the effect. The Mosaic will give you a richer, more resonant and full tone than a standard six-string guitar. It is true bypass and uses a 9V DC power supply to easily integrate into your existing pedalboard.


General Specifications
SAMPLE RATE

44.1 kHz
FREQUENCY RESPONSE

20 Hz-11 kHz (Effect Enabled)
SIGNAL TO NOISE RATIO

> -105 dB (A weighted); ref = max level, 22 kHz bandwidth
THD

0.004% @ 1 kHz; ref = 1 dBu w/ unity gain
A/D/A CONVERSION

24-bit
INPUT

1/4" Unbalanced (Tip-Sleeve)
OUTPUT

1/4" Unbalanced (Tip-Sleeve)
CONTROLS

Level, Tone
TRUE BYPASS

Yes. True bypass circuitry preserves your tone when the pedal is not in use.
Dimensions
LENGTH

4.75" (120mm)
HEIGHT

1.75" (44mm)
WIDTH

2.875" (73mm)
WEIGHT

0.36 lb. (163g)

Notes: The DigiTechr Drop is a dedicated polyphonic drop tune pedal that allows you to drop your tuning from one semitone all the way down to a full octave. Get down-tuned chunk without having to change guitars! The Drop also features a momentary/latching switch. With the switch set to momentary, you can turn the Drop into a true performance pedal. Fast trills and roller-coaster pitch dips are at the tip of your toes.

General Specifications
Input1/4" Unbalanced (Tip-Sleeve)
Output1/4" Unbalanced (Tip-Sleeve)
ControlsAmount, Momentary On/Off
A/D/A Converter24-bit
Sampling Rate44.1 kHz
Power SupplyPS0913DC-01 (US, JA); PS0913DC-02 (EU, AU, UK)
Drop Tune Range1-7 Semitones Down, Octave Down, Octave Down + Dry
Dimensions
Length4.75"
Width2.875"
Height1.75"
Weight0.36 lbs.

Notes: The TRIO+ is a simple-to-use guitar pedal that listens to the way you play and automatically generates bass and drum parts that match your song. Just plug your guitar into the TRIO+, press the Band footswitch to teach the TRIO+ your chords and rhythm, then press the Band footswitch again to start playing with your own personal band! Bass and drum levels can be adjusted for the perfect mix using the TRIO+'s Bass and Drums knobs. The TRIO+ also features a Simple Bass button lets you select between 3 bass line modes for busy or simple bass lines. Pushing the Band Creator™ paradigm further, the TRIO+ also allows you to loop and custom sequence your looped guitar parts to create full songs on the fly. Press the TRIO+'s Looper footswitch to record a loop along with an unlimited number of overdubs. The Loop level can be individually controlled using the TRIO+'s Loop knob. Loops can be recorded by themselves, operating just like a traditional looper, or along with the band. You can also apply built-in effects to your guitar signal by enabling the TRIO+'s Guitar FX button, or connect your favorite effects to the TRIO+'s FX Send and FX Return jacks. The TRIO+ provides 12 music genres to choose from including Blues, R&B, Rock, Alternative Rock, Metal, Pop, Electronic Pop, Hip-Hop, Country, Folk, Latin, and Jazz. 12 song styles are available for each genre and can be selected using the TRIO+'s Style encoder, including selection between 3/4 and 4/4 time signatures. Multi-colored LEDs around the TRIO+'s Style encoder indicate which styles best match your song. The TRIO+ can learn up to 5 different song parts, perfect for creating an intro, verse, chorus, bridge and outro. Song parts can be recalled on-the-fly as the song plays back or pre-programmed as a sequence for automated playback. An optional DigiTech FS3X Footswitch can be connected to the TRIO+'s Control In jack for additional handsfree control with 3 modes of operation to select from. Up to 12 songs along with loops can be stored to the TRIO+'s Micro SD Card (included). Need to create more songs? No problem. Just insert a new SD Card and you're ready to start teaching the band your new songs. To manage all your songs and loops on a computer, download the free Librarian Manager software from digitech.com, available for Windowsr and Macr. The TRIO+ offers independent Tempo, Genre, Style, Loop Level, Bass Level, Drums Level, Headphone Output Level controls; Guitar, FX Return and Control Inputs; Amplifier, Mixer, FX Send and Headphone Outputs; Built-in Guitar Effects (relative to music genre); a Soft Click Footswitch and includes a 9V DC adapter.

General Specifications
ControlsTempo, Genre, Style, Loop, Bass, Drums, Headphone Volume
Backlit ButtonsGuitar FX, Seq, Part 1-5, Alt Time, Song, Simple Bass
FootswitchesLooper, Band
LEDsGenre types, Style 1-12, Audiolastic, Looper, Band
JacksPower, Control In, Guitar In, FX Return, FX Send, Amp Out, Mixer Out, Headphone
OtherMini USB port, microSD card slot
Bit Depth24-bit
Sample Rate44.1 kHz
Signal-To-Noise Ratio110dB, A-weighted
Maximum Recording Time230 seconds per song part i based on a minimum 50 BPM and 48 bars per part
USB TypeMini-B
SD Card TypemicroSDHC, Class 10
SD Min/Max Storage Size8 GB/32 GB
Power Requirements9 VDC external power adapter
Power Consumption7.2 W
Current Draw800 mA
Dimensions
Length5.4"
Width4.25"
Height2.5"
Weight1.46 lbs.
Audio Output
Amp Output TypeUnbalanced, 1/4" TS
Amp Output Impedance1 kO
Mixer Output TypeUnbalanced, 1/4" TS
Mixer Output Impedance1 kO
FX Send Output TypeUnbalanced, 1/4" TS
FX Send Impedance1 kO
Headphone Output Type1/8" (3.5 mm) Stereo Mini Jack
Headphone Output Impedance120 O
Audio Input
Guitar Input TypeUnbalanced, 1/4" TS
Guitar Input Impedance1 MO
FX Return Input TypeUnbalanced, 1/4" TS
FX Return Impedance1 MO
Control Input Type1/4" TRS (compatible with DigiTech FS3X)

Notes: The legendary Whammy pedal is the premier pitch-shifting pedal for any guitarist's board, and it only gets better with time. In addition to the classic Whammy sound, we've added chordal Whammy pitch-shifting and true bypass.

Whammy artists have won over 60 Grammysr using its unique pitch-shifting sound to enhance their music. Its songs echo the hallways of the Rock & Roll Hall of Famer and generate acclaim on over 700 million albums around the world. There is no doubt why Whammy is one of the most common sights on guitarists' pedalboards.

The Whammy can bring new depth to your artistry. Turn your solo into raging, rebellious screams of tone or tame your crowd with highly expressive, ambient chordal bends. Energize your audience with a scratchy note frenzy, bring them in and out of the sound tunnel with musical bursts, or carry them through an existential exploration of full-fretboard pitch translation. The Whammy puts expression into the expression pedal.

Don't be the last guitarist without a Whammy! The iPB-10 unleashes the ability to create and control guitar effects like never before.

General Specifications
Sample Rate44.1 kHz
Frequency Response20 Hz to 20 kHz
Signal to Noise Ratio> -105 dB (A weighted); ref = max level, 22 kHz bandwidth
THD0.004% @ 1 kHz; ref = 1 dBu w/ unity gain
A/D Conversion24 bit
D/A Conversion24 bit
Power Consumption2.4 Watts (< 265 mA @ 9 VDC)
Power Adapter9 VDC External Adapter
Dimensions
Height2.5"
Width6.5"
Depth7.75"
Audio Output
Output Type1/4" Unbalanced TS
Max Output Level+10 dBu
Output Impedance1 kO
Audio Input
Instrument Input Type1/4" Unbalanced TS
Max Input Level+5 dBu
Input Impedance1 MO
MIDI Input5-Pin Din

Notes: Introducing a new addition to the DigiTech Whammy Family -- Whammy DT! We've taken the premier pitch shifting effects pedal added drop tuning and true bypass to bring you the ultimate Whammy pedal, the Whammy DT. With the Whammy DT, you can modify your tuning without having to change guitars or pause awkwardly to make adjustments for the next song. Key changes are at the tips of your toes and take just moments, which is crucial when the audience is feeling your vibe. Pitch shifting effects really help your guitar performance stand out and the Whammy pedal has been the core pitch shifting effect for famous artists for over 20 years. Now add full drop and raised tuning in addition to classic Whammy shifting to your effects arsenal and find out why the Whammy DT is the premiere pitch shifting effects pedal for every guitarist.

General Specifications
D/A Conversion24 bit
Pitch Bend Range+2/-3 Octaves
Detune Range-4 to -30 cents
Drop Tune Range1-7 Semitones, Octave, Octave + Dry
Power Consumption2.6 Watts (< 288 mA @ 9 VDC)
Power Adapter9 VDC External Adapter
Sample Rate44.1 kHz
Frequency Response20 Hz to 20 kHz
Signal to Noise Ratio> -105 dB (A weighted); ref = max level, 22 kHz bandwidth
THD0.004% @ 1 kHz; ref = 1 dBu w/ unity gain
Dimensions
Height2.36"
Width8.2"
Depth7.73"
Audio Output
Output Type1/4" Unbalanced TS
Max Output Level+10 dBu
Output Impedance1 kO
Audio Input
Instrument Input Type1/4" Unbalanced TS
Max Input Level+5 dBu
Input Impedance1 MO
MIDI Input5-Pin Din
Footswitch Input1/4" TRS - for use with optional FS3X Footpedal

What's in the box?
1 x Whammy DT Pedal
1 x Power Supply

Notes: The Whammy Ricochet lets you bounce your playing up or down in pitch in controlled or crazy shifts. A momentary switch and customizable independent rise and fall time ballistics, allow you to get the Whammy action you know and love without the use of a treadle. Just hold your foot on the footswitch and let the Ricochet do the rest. Seven pitch selections - 2nd, 4th, 5th, 7th, Octave, Double Octave, and Octave+Dry, as well as a toggle to select up or down for the selected pitch. The Whammy Ricochet also has latching footswitch mode so you can rise or fall to pitch and stay there, and an LED ladder that shows your shift trajectory at all times. All these controls combine to create classic Whammy pitch-shifting as well as new sounds never heard before.

General Specifications
ControlsBallistics Control, Pitch Control, Range Switch, Momentary Switch, Effect On/Off
Sample Rate44.1 kHz in classic mode, 22 kHz in chords mode
Frequency Response20 Hz-16 kHz (classic mode), 20 Hz-11 kHz (chords mode)
Signal to Noise Ratio> -106dB (A weighted); ref = max level, 22 kHz bandwidth
A/D/A Converter24-bit
THD0.004% @ 1 kHz; ref = 1 dBu w/ unity gain
Power Consumption2.1 Watts (235 mA typical @ 9 VDC)
Power Requirements9 VDC External Adapter (sold separately)
Power SupplyPS0913DC-01 (US, JA, EU); PS0913DC-02 (AU, UK)
Power Adapter Output9 VDC 1.3 A
Dimensions
Length4.75"
Width2.875"
Height1.75"
Weight0.8 lbs.
Audio Output
Output1/4" Unbalanced (Tip-Sleeve)
Max Output Level+10 dBu
Output Impedance1 kO (Effect enabled or effect bypassed w/ Momentary switch on) True Bypass (Effect bypassed w/ Momentary switch off)
Audio Input
Input1/4" Unbalanced (Tip-Sleeve)
Max Input Level+5 dBu
Input Impedance1 MO (Effect enabled or effect bypassed w/ Momentary switch on) True Bypass (Effect bypassed w/ Momentary switch off)

Notes: Designed in collaboration with Black Arts Toneworks, the Boneshaker is a dirty boost coupled with a powerful 3-band semi-parametric EQ. The Boneshaker can smack the front-end your amp into overdrive, or sculpt the tone of your fuzz to stand out in a mix. If your already dirty amp channel needs a little bit of a goose and you want full control over every frequency, the Boneshaker is just the ticket.

General Specifications
INPUT

1 x 14" instrument
OUTPUT

1 x 14" instrument
CHASSIS MATERIAL

All Metal
POWER SUPPLY

9V Alkaline Dry Battery or Optional Power Supply
Dimensions
HEIGHT

2.25" (5.71 cm)
WIDTH

2.63" (6.68 cm)
LENGTH

4.68" (11.88 cm)
WEIGHT

1.0 lbs. (0.453 kg.)

Notes: Pairing an adjustable carrier signal with a revamped distortion circuit, the DOD Gonkulator essentially brings two effects into one chassis with controls for ring, frequency, gain and distortion. Capable of all the weird modulation goodness of the '90s original with the added ability to cover distorted experimental ground, this pedal pushes boundaries and makes statements with modulating effects limited only by imagination. From bell-like clangs to spastic robotic breakdowns, the Gonk demands attention.

General Specifications
INPUT

1 x 14" instrument
OUTPUT

1 x 14" instrument
CHASSIS MATERIAL

All Metal
POWER SUPPLY

9V Alkaline Dry Battery or Optional Power Supply
Dimensions
HEIGHT

2.25" (5.71 cm)
WIDTH

2.63" (6.68 cm)
LENGTH

4.68" (11.88 cm)
WEIGHT

0.62 lbs. (0.281 kg.)

Notes: "We meat again!" Proudly presenting the DOD Meatbox (2015).

Answering the call of low frequency freaks everywhere, the DOD Meatbox (2015) is an updated take on the cult favorite Meatbox from the '90s. As a bass subharmonic synthesizer and low-end enhancer, the Meatbox can produce a range of sounds from a slight thickening to a full-on, low-end assault! Use the Meatbox on bass guitars, extended-range guitars, synths, even drum machines and push all the air out of any room. If you're looking for a new way to move your audience, look no further.

More than just a low frequency boost, the DOD Meatbox (2015) can also cut frequencies for tone sculpting as an interactive EQ and even produce distortion depending on where the output level is set.

The DOD Meatbox (2015) offers independent Octave, Output Level, Subharmonic and Low Frequency controls. True bypass allows your tone to remain pristine even when the DOD Meatbox is off. This is a big difference from the original, which would colour your bypassed tone.

The modern 9V DC power supply input makes the pedal more pedalboard friendly.

Notes: Part of Dreadbox's impressive effects line-up, the Disorder is a rowdy fuzzbox crossed with a self-oscillating filter, serving up some pleasingly nasty tones. An envelope follower with CV output adds versatility.

Supplier's Notes:
The disturbance in physical or mental health or functions. It could be defined as a set of problems, which result in causing significant difficulty, distress, impairment and/or suffering in a person's daily life.

Dreadbox Disorder is a very aggressive fuzz pedal with a twist. It is equipped with a self-oscillating filter, that allows you to produce oscillating fuzz sounds.

Additionally it has a low pass and high pass filter, that makes it suitable for guitar and bass as well. Finally an envelope follower is also present, allowing you to create wah-wah sounds.

Specifications

Circuit: Analogue
Bypass: CMOS
Audio: Mono
Inputs / Outputs
IN/OUT: TS Unbalanced 6.4mm jack
Power Supply: 9VDC BOSS style center pin negative 2.1mm (Not included)
Dimensions (cm): 14 x 10 x 5.6
Current Draw: 50mA

Notes: Huge chorus-flanger. Take your music to infinity. The fully analogue Dreadbox Komorebi Chorus-Flanger Pedal gives you a huge array of sound design possibilities. This powerful pedal can add some serious impact to your sound.

It doesn't matter if you're playing bass, guitar, synths, or even if you want to hook it up to your modular Eurorack system. The Komorebi is ready to go. Sprinkling its beautiful effects over anything it touches.

From a slight pinch of flange to add some movement to your bass lines, or a lengthy chorus effect to treat your pads and chords to a final touch of space-age wideness. It's a guitar pedal but not as you know. Komorebi works with everything.

Current draw: 100mA

Notes: Designed to play nicely with guitars and synths alike, this OTA-based mono phase shifter excels at warm, characterful modulation. Three Eurorack-compatible patch points add creative options.

Supplier's Notes:
Lethargy derives from the greek word for forgetfulness, "Lethe". It is a state of being drowsy and dull. The feeling of having little energy or of being unable or unwilling to do anything.

Dreadbox LETHARGY is an OTA based Phase Shifter effect pedal suitable for fretted instruments and synthesizers, with eurorack patch compatibility.

100 mm wide
140 mm high
90 mA / 9 V DC / Negative Center

SPECIFICATIONS:

Circuit: Analog

Bypass: CMOS

Audio: Mono

Inputs / Outputs:
IN/OUT : TS Unbalanced 6.4mm jack
Manual / Rate / LFO Out : 3.5mm mini jack

Power Supply: 9VDC BOSS style center pin negative 2.1mm (NOT INCLUDED)

Dimensions (cm): 14 x 10 x 5.6

Current Draw: 90mA

Notes: The Dreadbox PSYCLOP is the ultimate modern utility device. It's an Effects Chain Loop with Dry/Wet mix control, Signal Attenuator and Boost as well as Expression to CV (Control Voltage) converter, all in one easy to use package suitable for string instruments or synthesizers and is also Eurorack compatible.

PSYCLOP is not your average Effects Loop Mixer. Capable of managing any type of signal from instruments or effects pedals, PSYCLOP seamlessly blends them with its parallel effects loop.

Its features include Input Attenuation of up to -20 dB and an Output Gain Boost of up to +20 dB in order to match any signals. For unity gain, simply set the Input Attenuation Amount to 100% with the IN control and using the OUT knob, adjust the Output Gain Level to 0%.

To avoid phase cancellation issues between the dry and wet signal paths, the PSYCLOP also features a simple but effective Effects Loop Phase switch, which is easily accessible on the pedal's side.

Additionally, PSYCLOP is capable of converting TRS Expression signals to CV and makes them usable with most Eurorack gear, making it a perfect device for synth fans and sound design enthusiasts. The pedal's EXP knob attenuates the CV output. When nothing is connected to its CV IN jack, the CV OUT jack will output 0-5V depending on this knobs' setting and a connected EXP pedal's position.

So all you have to do is plug in and embark on your next thrilling sound design adventure.

Notes: Another banger from Dreadbox's excellent effects series. Stereo echo effects based around multiple hybrid delay stages, giving bags of character for reverb, modulation effects and classic delays.

Supplier's Notes:
Dreadbox Raindrops is a Hybrid Delay/Pitch Shifter/Reverb pedal that takes the concept of short echoes to a different level.

It is equipped with multiple delay stages and different chips and you can choose between 3 different play modes, where in each one you can have a whole new experience and alternative soundscapes. You can achieve from simple short echoes, to long, dirty and lo-fi delays and from simple pitch shifting bursts to extensively lasting reverbs.

Specifications

Circuit: Analogue Dry signal / Hybrid Delay / Digital Reverb
Bypass: Buffered OpAmp
Audio: True Stereo IN/OUT
Inputs / Outputs: TS Unbalanced 6.4mm jack
Power Supply: 9VDC BOSS style center pin negative 2.1mm (NOT INCLUDED)
Dimensions (cm): 14 x 10 x 5.6
Current Draw: 220mA

Notes: The Acapulco Gold is a dirt-simple distortion Device modeled after the sound of a cranked vintage Model T amplifier, bringing the openness, clarity, and crunch that only a dimed tube amp can provide, at a fraction of the size, and without expensive maintenance costs!

Since tone is in the hands, the controls of the Acapulco Gold are as simple as possible. The footswitch turns the pedal on and off, and the giant knob controls the output volume. That's it. The rest is at your fingertips. Want less gain? Turn down your guitar's volume knob. Need a darker rhythm tone? Roll back your guitar's tone control. Easy, right?

Big Knob: The big knob sets the output level, sometimes known as Volume. PLEASE BE CAREFUL, the Acapulco Gold is extremely loud!

With your guitar's volume all the way up, the Acapulco Gold roars like a wide-open Model T on the verge of explosion. At just-barely-backed-off, the Gold becomes a raunchy overdrive. At minimum guitar volume settings, the Acapulco Gold delivers a hazy, Nashville-sounding spank to your tone.

How about this? If your guitar has separate volume and tone controls for each pickup and a three-way selector switch, this little one-knob banger becomes a three-channel tone monster at the flick of your wrist!

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise.

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs

Current Draw: 18 mA

Notes: Seriously potent effects power as usual from EarthQuaker. Octave reverb with clever modulation options and eight different modes, from sub-octave generation to pitch-bent harmonies.

Supplier's Notes:
Unrelenting, radicalized reverb for the modern world; an array of haunting, unearthly delights and ethereal sonic sorcery designed to take you on a deep journey through both time and space. This is your new destiny should you choose to accept it. Welcome to your new Astral Destiny.

The Astral Destiny is a compact and powerful modulated octave reverb pedal that features 8 reverb modes with 8 editable presets, assignable expression control, tails for natural reverb decay when the effect is bypassed and a super cool stretch feature that doubles the length of the reverb while adding an adjustable pitch bending effect.

Astral Destiny features a completely analog dry signal path, totally digital delay path, buffered bypass with and two different bypass states- Tails or Full Bypass. Tails Mode, which the is the pedal's stock setting, allows the reverb to naturally decay after the effect is bypassed, slowly letting you drift back from your ethereal dream state into the waking world. Full Bypass, on the other hand, will cut the reverb effect completely when the effect is bypassed and instantly throw you back into cold clutches of reality.

Let your fate spin out of control by pressing the Stretch footswitch doubles the length of the reverb effect while adding a temporary change in pitch. While a short tap will immediately change the pitch, holding the Stretch footswitch depressed gives you a temporary pitch bending effect with the speed of the of the pitch bending effect created by holding the Stretch footswitch easily adjusted by turning the Length knob.

While the Astral Destiny offers two different modes of operation, it ships in Live Mode, where each control will operate manually, laying out your fate for you, clearly visible. Preset Mode in contrast lets you chose from one of the 8 unearthly, ethereal factory preset reverb fates, 1 for each reverb mode, the Astral Destiny comes with. Each of these can be edited or completely overwritten just like when the ancient Fates plucked or cut the strings of ones destiny. Save settings for Length, Depth, Rate, Tone, Mix as well as EXP assignment and Stretch length and recall them instantly. Any of the Astral Destiny's 8 reverb modes can be used as the basis for each of the 8 presets.

But beware! - There is no undo for preset saving, so make sure you are not overwriting your favorite sound, especially when you are saving presets from Live Mode! - Once the string of your fate is cut, there is no turning back on your destiny. Freely express any aspect of your Astral Destiny - Shipping with the EXP jack mapped to the Depth control, the expression control can also be swiftly assigned to Length, Rate, Tone, or Mix, plus different EXP assignments can be saved in each preset and you can also use Control Voltage with the EXP Jack.

Each Astral Destiny is built one at a time by a team of Los Angeles-based robots and a handful of real life humans in the occupied Erie territory presently known as Akron, Ohio.

Notes: Limited-edition reissue of EarthQuaker's excellent Disaster Transport, lightly updated for 2023. Modulated delay now with reduced noise floor, analogue-style filtering and switchable modulation modes.

Supplier's Notes:
Disaster Transport

Legacy Reissue

The Original Delay Modulation Machine

Limited to 3,500 units worldwide. Behold! The newest incarnation of one of Earthquaker Devices' most beloved pedals ever, the Disaster Transport. For those of you well versed in the pedal's celebrated history, you might notice some differences on this beautifully sparkly box. A new Mod Mode switch allows you to bend or stretch the modulation wave. The new Mod Speed switch offers three rates of modulation, from bizarrely animated gradual climbs and steep drop offs to rapid chorus and intense vibrato.

The delay line has been redesigned to reduce the noise floor and improve the quality of the delay. Plus, it's now filtered to sound more like an analogue delay than any of the previous versions. With knobs to control the Speed, Intensity, Mix, Repeats, and Time; this analogue-voiced digital delay sits perfectly in the background with an evolved ambiance, but can also be dialled in for the dramatic effect of your choosing.

EQD initially set out to recreate the original Disaster Transport pedal in its earliest form, but the OG of EQD, Jamie Stillman, couldn't resist tinkering and improving the whole thing, so you just got upgraded, my friend. In doing so, EQD redesigned the delay line to reduce the noise floor and improve the quality of the delay. The output was boosted with a cleaner mixing section; it's now filtered to sound more like an analogue delay than any of the previous versions.

EQD added a Mod Mode switch that allows you to choose between bending and stretching the modulation wave. The Bend setting offers a subtler vibe closer to a traditional chorus sound, while the new Stretch option gives you loads of pitch-stretching modulation to run wild with.

The other difference you probably spotted with your eagle eye is the Mod Speed three-position toggle switch. The Slow setting is excruciatingly slow and can produce bizarrely animated gradual climbs and steep drop offs. The Fast setting can go from a rapid chorus to an intense vibrato, while the Medium setting is the most traditional rate similar to the classic Memory Man circuit with a nice range to it.

The newly designed enclosure features knobs to control the Speed, Intensity, Mix, Repeats, and Time, with Modulate and Activate switches, making this a highly customizable pedal to get the delay sound of your dreams. Thanks to the ramp modulation circuitry, you can turn the delay time down and start to use feedback and modulation at a higher setting to harness a bizarre modulator and achieve subtle to wild chorus-type effects. Or set your delay time how you want to set it and use your modulation rates to set your tempo, so you can strum or pluck to the climbs and drop offs to match your riffs. The possibilities are endless.

Controls

1. Speed: Controls the speed of the modulation. The Speed operates in three ranges (Slow/Fast/Medium) selected by the Mod Speed toggle switch. The Disaster Transport uses a Ramp wave for the modulation. You'll find this to be much more intense than most modulated delays. Think of it as a traditional Triangle wave that falls off a cliff in mid-cycle, creating a drastic pitch bend in its wake. Or don't and just think about whatever you want.

2. Intensity: Controls how much the LFO modulates the delay time. More subtle chorus type effects are achieved with less intensity and more intensity will yield wild pitch stretching and bending. The overall modulation style can be made more or less subtle by using the Mod Mode toggle switch to select Bend or Stretch.

3. Mix: Sets the volume level for the delay signal. Hear more of what you just played 30-600ms ago by turning this up.

4. Repeats: Controls the intensity of delay feedback from no repeats at zero to self-oscillation at max. Let the past pile up on you until it implodes.

5. Time: Sets the delay time from around 30ms at zero to 600ms at max. Everyone needs more time; you are offered about 600ms worth.

6. Mod Speed: Three position toggle switch that sets the range in which the Speed operates.

7. Mod Mode: Two position toggle switch to choose the modulation style. Bend is more of a traditional chorus type modulation and Stretch is a wilder pitch stretching modulation.

8. Modulate: This foot-operated switch features Flexi-Switchr Technology and turns the modulation on and off.

9. Activate: This foot-operated switch features Flexi-Switchr Technology and turns the effect on and off.

Tech Specs

Dimensions: 3.65 x 4.65 x 2.25 in. (93 x 118 x 57 mm) with knobs
Current Draw: 35 mA
Input Impedance: 1 MO
Output Impedance: 1 kO

Flexi-Switch Technology

This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power

This device takes a standard 9 volt DC power supply with a 2.1mm negative centre barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise.

*** Do not run at higher voltages! ***

Notes: You hear that EVP? It's the all new, extra spook-tacular, Ghost Echo calling out from beyond the void! The Ghost Echo is Earth Quaker's spooky take on the haunted amp-top spring reverberation units of yesteryear. This creepy analog/digital spring reverb emulation machine boasts a terrifying 30ms - 150ms of pre-delay, controllable via the Attack knob, for everything from a quick rockabilly slapback to viscous pools of ectoplasmic reverberations. When playing staccato, you'll hear the tortured trails of the reverb, resulting in more of a slapback or echo sound. Legato playing will reveal a massive ambient "depth" that fattens up the sound - and look out, it's right behind you!

Phew, that was close. The Dwell control sets the length and thickness of the decay, which is to say that it controls how long the disembodied spirits of notes no longer with us float through the ether. At the maximum setting it will descend into an infinite loop of self-oscillation. The Depth sets the intensity of the reverb, which you probably know as the wet/dry mix.

Controls:
1. Attack: Adjusts the length of the pre-delay, from 30ms at minimum to about 150ms at maximum. When the Dwell is set to self-oscillate, this will change the pitch of the oscillations.

2. Dwell: Adjusts the length of the decay. This will start to self oscillate around 3 O'clock, the pitch of the oscillations can be changed by turning the Attack control.

3. Depth: Mixes in the wet signal with the dry, unity is around noon and everything after is boosted.

Tech Specs:
This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 86 mA
Input Impedance: 10 MO
Output Impedance: 1 kO

Notes: Hizumitas was designed for the one and only Wata from the legendary experimental band Boris, one of the heaviest bands ever to come out of Japan. The trio of guitar sorceress Wata, drummer and vocalist Atsuo, and double-neck bassist, guitarist and vocalist Takeshi has almost 100 releases filled with genre and brain-melting music.

In their nearly three decades together, Boris has infused doom, hardcore, thrash, noise-core, ambient, free improv, drone, psychedelia, and more into their extensive discography. Boris is also known for their unique collaborations with mutually adventurous artists, including American Doom mongers Sunn O))), noise legends Merzbow, Keiji Haino, and Ian Astbury of The Cult.

Wata, always seen and heard on stage wielding her black Les Paul Custom, mixes killer riffs with searing, fluid, or jaggedly melodic leads and controlled walls of feedback, often with help from an EBow. It's a connection of chaos and melody that has enchanted Boris fans worldwide and influenced many bands that have followed in their considerable wake. Simply stated, no other band sounds like Boris, and no other guitarist rocks like Wata.

But with EQD's Hizumitas fuzz on your pedalboard, you can carve out your own singular, mega-heavy tone.

Hizumitas is a faithful recreation of Wata's go-to distortion pedal, the Elk BM Sustainar. The Elk is a Japanese variant of the very well-known "Triangle" BMP. The designers at EQD tried several vintage BMP's during development, found that each pedal was wildly different and realized that to truly capture the magic they needed the original. Wata graciously sent her beloved pedal halfway around the world, and EQD discovered that it had something special the others didn't have: heavy saturation with a gritty edge and massive bottom while maintaining a clear and dynamic tone with enough mids and top end to cut through any sludge. The studious wizards at EQD have built all of those characteristics into the Hizumitas.

Notes: EarthQuaker Devices Special Cranker

An Overdrive you can trust

The Special Cranker is an all-discrete analogue distortion enhancement device designed to give your signal some extra grit and boost without drastically altering your tone and retaining all of the natural nuances and character of your amp. Think of it as sticking an extra preamp tube in your amplifier for more saturation. Single notes will blossom and bloom with rich harmonics and singing sustain with responsive, tube-like sag. Power chords will sound thicker and crunchier, a little more ragged around the edges. Complex chords will remain distinct and complex, as the Special Cranker is designed to preserve your tone's integrity without muddying up the low-end or smearing the midrange.

The Special Cranker picks up where the beloved Speaker Cranker left off. It has the same spongy, dynamic, and touch-sensitive character of the original but with more gain, double the output volume (now with a user-friendly Level control), an added Tone control to shape your signal, and a diode selector switch featuring the original asymmetrical Silicon diodes as well as a hot, new Germanium diode option.

The More control goes from nearly clean to a medium gain overdrive when at maximum. This control adjusts the bias of the transistor, so you may hear a little noise as you turn the control. Don't freak out; it's totally fine. The gain characteristics are dependent on which diodes are chosen. When the Germanium diodes are selected, the Special Cranker delivers a softer, more rounded response with tamed highs and lower output, while the Silicon diodes add a brighter, more modern edge and higher output. Both are exceptionally responsive to playing dynamics and have excellent clarity. The Tone control gives the user full command over treble frequencies, cutting the highs when counter-clockwise and adding a slight high-frequency boost when turned clockwise. The Level control adjusts the output from nothing to nearly double at maximum.

Tech Specs:

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 15 mA
Input Impedance: 5M P
Output Impedance: <25 kO

Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power:

This device should be powered a standard 9-volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise.

The Special Cranker can be safely operated from 9-18 volts.

Notes: Sunn O))) and EarthQuaker Devices are pleased to bring you the Life Pedal Volume III. The Life Pedal V3 circuit has been meticulously tweaked from the original to squeeze every last drop of heavy crushing tone available. The octave section has been fine tuned to make it more pronounced without losing the bottom end and we added a third footswitch, utilizing Flexi Switch Technology, for the octave to allow an additional method of quick and radical tone shaping. We are excited to have this back in permanent production, it is a true labour of love.

Life Pedal V3 is a distortion with a blendable analogue octave up and a booster combined in one compact package. The "Amplitude" side is faithfully modelled after the classic "White Face" distortion unit, using modern, reliable components to last a lifetime. The only modifications made to the original circuit are in the clipping section. The traditional circuit uses a single pair of silicon diodes for a tight, compressed crunch.

As with version 2, Life Pedal V3 offers two additional clipping options to better adapt to different rigs. The first position is no diodes to allow for full, grinding Op Amp assault at maximum volume. The second position utilizes two silicon diodes and one LED in an asymmetrical clipping configuration. This delivers a slightly compressed and smooth crunch, similar to a valve amplifier.

The last position is the stock double silicon diode configuration which provides that classic tone you know and love. The Octave in Life Pedal is an all-discrete, analogue full-wave rectifier base on a classic vintage design. Located at the input of the circuit, the Octave control slowly blends in the octave effects as you turn it clockwise. This feature can also be used via expression control allowing for wild, hands-free octave swells mid-riff or using the footswitch for immediate octave fuzz destruction.

Because this is an analogue octave effect, it is monophonic and works best playing single notes above the twelfth fret while using the neck pickup. Playing chords with the analogue octave will sound clanging and chaotic.

Using the bridge pickup and playing below the twelfth fret will produce a very subtle octave effect. Going full Octave transforms Life Pedal from a simple distortion device into a swelling, raging fuzz similar to the classic Super Fuzz!

The "Magnitude" section of Life Pedal is a simple all-discrete MOSFET booster designed to blast your preamp tubes and drive them wild. It is a 100% clean, no-nonsense, high impedance booster that adds very little colour to your tone. It does not add distortion on its own but has plenty of output to push your amp into saturation.

The signal path goes Octave>Distortion>Boost. The octave distortion and booster can be used independently with their own respective foot switches. The Petrine Cross is the octave distortion and the Christian Cross is the booster.

Notes: The EHX 1440 Stereo Looper is a compact powerhouse that provides 1440 seconds of high-quality, uncompressed, stereo recording time plus the ability to store 20 different loops. It can even tempo sync to an external MIDI device and is packed with features you'll want. Unlimited overdubbing means you can lay down as many parts as you like while variable tempo playback plus Reverse and Octave speed effects really enhance creative control.

A 1 Shot function is also included, adjustable fadeout times and optional external footswitch control for selecting loops and Undo/Redo. The affordable 1440 Stereo Looper puts a ton of looping power on your pedalboard.

Notes: The EHX 45000 Foot Controller makes everything faster and easier by delivering hands free operation of the key functions of the 45000 Multi-Track Looping Recorder. Choose a new track or loop without missing a beat. Get instant access to up to 100 loops per SDHC card. Record and Play new loops with ease.

The Foot Controller receives power from the 45000 and connects to it with a standard mono guitar cable. It's a must have!

The 45000 Foot Controller allows you to use your 45000 remotely, with your feet!
Provides instant access of up to 100 loops per SDHC card
Gives you access to Track Select, Record, Play, Loop Up and Loop Down
Large dual digit display indicates the 45000's current loop number
The Foot Controller obtains all of its power from the 45000 using a standard 1/4 guitar cable
No power required

Specifications:
Circuit: Digital
Audio: Mono
Dimensions (in): 5.75 x 4.75 x 2.5
Year Released: 2013

Notes: An intuitive looper with 720 seconds (12 minutes) of stereo recording time on 10 independent loops and unlimited overdubbing that's perfect for practice and live performance!

The EHX 720 Stereo Looper is a powerful looping tool with 12 minutes of stereo recording time, 10 loop memory banks, and creative performance functions. Its simple-to-use design makes it an easy and effective to use in both live and practice situations.

The 720 records in high-quality stereo for use with stereo effects or even use with two instruments. A second footswitch can be programmed to stop loop playback or toggle on/off the built-in Reverse and 1/2 Speed playback effects. The programmable Fadeout mode applies an automatic fade when playback is stopped.

-Extra-long 12 minutes of stereo recording time
10 independent loops
Undo-Redo, Reverse and 1/2 Speed Effects at the touch of a button
High-quality, uncompressed audio, 24-bit A/D/A converters plus 44.1kHz sample rate
Stereo in/out for enhanced usability... record two instruments at once
Foot controller input provides a way to use popular 3-button foot controllers to change a bank up or down, and gives access to instant Undo-Redo
Silent footswitches
Loop fadeout (trails) mode
Power adapter included

Specifications
Circuit: Digital
Bypass: Buffered Bypass
Audio: Stereo
Power Supply: 9.6VDC-200mA power adapter included (optional 9V battery not included)
Dimensions (in): 4.75 x 4 x 2.25
Current Draw: 75mA
Year Released: 2015

Notes: EHX has grafted technology found in keyboard and modular synthesizers into a pedal designed for guitarists and bass players. The Blurst modulates an instrument's sound like an envelope filter, but instead of the filter's response being controlled by playing dynamics, it's controlled by an internal oscillator. The Blurst is a must have for the adventurous player who wants to explore new sonic territory!

Introducing the Blurst, a radical modulating filter. It's an effect often used on synthesizers, but we've designed the Blurst especially for guitar players and bassists who want to explore new sonic territory.

It features an analog, low pass filter with adjustable resonance, three modulation waveform shapes, tap tempo with tap divide and EXP control over Range, Rate or Filter. An EHX 9.6DC/200 AC adapter is included.

The Blurst is a must have for the experimental musician and works well with an expression pedal, the EHX 8-Step Program and other control voltage sources. Whether used alone or with other effects, the Blurst's hypnotic effects are spellbinding!

Notes: The ultimate rotary speaker emulator packed with goodies like a specially designed compression circuit to supercharge the rotating speaker effect on guitar.

Lester G's comprehensive controls include fully adjustable tube-style overdrive, Fast and Slow modes and an Acceleration control to dial in the rate at which the effect transitions between speeds. The sound of that giant wood cabinet will now fit on a pedalboard!

*UK 3-pin power supply included

Notes: The MOD REX is a kinetic tour-de-force that lets you weave compelling, shifting, musical tapestries. Whether you are a guitarist, synthesist or electronic musician you will find it inspires your creativity and stretches your musical boundaries.

Four independent modulation sections:

The heart of the pedal is its four, independent modulation sections synced in time, they are:

MOD features great sounding EHX Vibrato, Flanger, Chorus or Phaser. The Depth knob lets you set the amount of the effect while Feedback controls the resonance of the Flanger and Phaser.

TREM delivers tremolo, an effect that modulates the volume of your signal. The Depth control sets tremolo intensity.

PAN modulates between left and right in stereo operation. In mono operation the PAN section acts as another tremolo section, but with the wave shapes all inverted!

FILTER offers a choice of a modulated LPF, HPF or BPF. In LPF (low pass filter) frequencies above a modulated cut-off point are cut. In HPF (high pass filter) frequencies below a modulated cut-off point are cut, and in BPF (band pass filter) frequencies above and below a modulated centre point are cut.

Each section also features a choice of four LFO shape options: rising sawtooth, triangle, falling sawtooth or square wave. They affect the way the modulation transitions and provide advanced creative control over the specific section as well as the way they interact with each other.

Tempo control that's flexible and powerful:

The MOD REX delivers virtually limitless polyrhythmic possibilities.

Its TEMPO component gives you nine note-length choices for each of the four modulation sections. They are independently selectable in increments starting at a whole note and ranging thru subdivisions that go up to a 16th note. In addition, any of the sections can be bypassed.

The MOD REX's tempo (displayed as beats per minute or BPM) is adjustable with the Tempo knob, Tap Tempo footswitch or by using an expression pedal into its EXP input. It can also be synced to an external device with MIDI Clock or an external pulse clock.

MIDI and the MOD REX:

The pedal's robust MIDI implementation enables you to sync devices quickly and easily as well as automate functions and changes so they occur precisely when and where you want them whether you are working at home, in a studio or live.

The MOD REX accepts MIDI to enable it to tempo sync the modulation rate with an external device, to recall presets via MIDI Program Change messages and to control any parameter on the MOD REX via Control Change messages.

Extras:

The MOD REX lets you save and recall up to 100 presets. It comes from the factory with 20 great programs.

The pedal features full stereo input and output.

An external foot controller input makes banking up and down thru presets quick and easy.

Notes: The legendary Memory Man legacy continues with this compact take on the Deluxe model. Classic bucket brigade delay sounds with new modulation controls including rate and depth.

Supplier's Notes:
No one does analogue delay and modulation like Electro-Harmonix and the Nano Deluxe Memory Man delivers the unmistakably lush delay, chorus and vibrato of the benchmark large-format Deluxe Memory Man in a compact, pedalboard ready chassis.

The Nano Deluxe Memory Man delivers EHX's signature analog delay, chorus and vibrato plus some updates we've added including both Rate and Depth knobs for enhanced modulation control. It features a maximum delay time of 550mS, an internal user-accessible switch to turn delay tails on or off, true bypass switching when the tails feature is off and it comes equipped with a standard 9Volt power supply. For over 44 years the Deluxe Memory Man has been the gold standard for analog delay and modulation. Now it's available in an ultra-compact package!

Specifications:

Circuit: Analog
Bypass: Selectable True Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 150mA
Year Released: 2021

Notes: An advanced, feature laden, stereo overdrive and distortion pedal with a broad range of options and controls. With the Operation Overlord - whether you play keyboards, guitar, bass or pretty much any electronic instrument - dialling in great drive sounds is fast and fool-proof. Active, Treble, Mid and Bass controls, a foot-switchable Boost mode and a dry blend deliver superlative sound shaping. It even features two independent channels for use with stereo setups. Whatever your rig, the Overlord is your indispensable ally.

Notes: A sophisticated noise gate that can tame a single pedal or an entire effects loop! The Silencer's three-control layout provides precise fine-tuning to fit your system, axe and playing style. Threshold adjusts how much level is required to open the noise gate and allow a signal to pass thru. Reduction regulated the degree to which the gated signal is reduced and is variable between -70dB and +4dB. Release controls how long the gate remains open after the signal drops below the Threshold. Release time is variable between 8ms and 4 seconds.

I/O includes 1/4" Input, Output, Send and Return jacks. The footswitch selects whether The Silencer is engaged or in bypass mode; buffered bypass allows the effects loop to remain in your signal path when the gate is bypassed. A built-in AC jack accepts a standard power supply like the EHX 9.6DC unit (optional) and the pedal comes with a 9V battery.

Conquer noise with The Silencer!

Notes: A truly super tremolo with powerful controls and signal routing.

Sculpt the tremolo's shape with adjustable sine, triangle and pulse waveforms while tap tempo and tap divide ensure synchronicity.

Create your own rhythmic patterns and store them.

Save and recall up to eight customized preset programs.

Conjure moving tremolos on-the-fly with EXP control over Rate, Depth, Shape, Phase or Volume. Deluxe I/O lets you choose stereo in/out, mono in/stereo out, stereo in/mono out or mono in/mono out operation.

Analog circuitry yields warm, lush tone that will envelop you in shape shifting waves.

*UK 230V power adapter included*

Notes: The polyphonic SUPEREGO Synth Engine reinvents sample and hold, performs fluid glissandos and creates oscillator like, synthesizer effects. It can stack sounds or create infinite sustain, it even lets you tweak attack and decay, or use its effects loop to invent novel synth patches. Indulge your guilty pleasures!

*UK 230V power adapter included*

Notes: We have reissued the original Version 1 Big Muff and it's dripping with vintage Electro-Harmonix DNA and tone. Dubbed the Triangle Big Muff because of the layout of its Volume, Sustain and Tone controls, this is the one that started it all. The new Triangle Big Muff is a faithful re-creation of the original circa 1969 circuit now housed in a pedalboard friendly, die cast chassis.

Electro-Harmonix founder, Mike Matthews, stated: "The Big Muff Pi is the pedal we are best known for so I wanted to commemorate EHX's 50th Anniversary (1968-2018) by re-releasing V1, the very first Big Muff. Original pedals are now selling for hundreds of dollars and this reissue absolutely nails that creamy, violin-like sustain and musical tone at a price a working musician can afford.

Notes: The EHX 22500 is a stereo looper with two independent loops that can be played in sequence or in parallel. Flexible performance controls and creative effects allow you to loop in any way you imagine. It records high quality, non-compressed audio directly to a removable SDHC card (4 to 32 GB) and each card holds up to 100 individual loops. Includes an 8GB card for up to 12 hours of recording time.

Creative controls over looping functions such as adjustable tempo, programmable loop/overdub length, and two loops that can playback independently or locked to one another makes the 22500 act like the looper of your dreams.

Download free drum loops for the EHX 22500

Dual stereo loops with independent or locked loop lengths
Sequential looping mode enables verse/chorus switching
Parallel looping mode allows simultaneous playback of two loops
16 built-in drum loops
Selectable microphone input with phantom power
Reverse and Octave functions
Undo-Redo your last overdub or recording
Quantize or non-quantize (free running) modes
USB port enables backup/restore to PC or Mac
Programmable third footswitch for Stop or Tap Tempo
Optional external Loop Up/Down Foot Controller
Power adapter included

SPECIFICATIONS
Circuit
Digital
Bypass
Buffered Bypass
Audio
Stereo
Power Supply
9.6VDC-500mA power adapter included
Dimensions (in)
5.75 x 4.75 x 2.5
Current Draw
235mA
Year Released
2015