Hi-Fi Cartridges | Phono Cartridges

Notes: The Goldring 1012GX record cartridge uses the acclaimed Gyger-2 diamond stylus. This is a fine-line type which gives smooth extended high frequencies, low distortion and reproduces a highly detailed and dynamic sound. Advanced diamond tip polishing ensures excellent tracking ability and reduces record wear. The 1012GX represents outstanding value for money and has become one of Goldring's most popular cartridges.

Notes: The 1022GX record cartridge is recommended for the discerning listener. The diamond stylus is a Vital PH type, which provides increased resolution and ensures the maximum accuracy of musical reproduction.

Notes: Top-of-the-range audiophile cartridge from Britain's oldest cartridge company. Beautifully revealing sound with quiet background and replaceable Gyger-S stylus included.

Supplier notes:
The 1042 is a record cartridge for the audiophile who demands the ultimate sonic performance from their system, together with the convenience of a user replaceable stylus. The extended groove contact of its Gyger-S diamond gives the 1042 unsurpassed resolution of the fine groove modulations, producing an exceptionally detailed, smooth and musical sound.

Notes: The Goldring philosophy is to promote the accurate reproduction of the original recording, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. The E Series is designed to capture this experience when used with all medium to high mass tonearms found on the majority of budget to medium priced turntables. This is achieved through the use of Magnetic Duplex Technology and Goldring Expert Adjustment.

The E3 cartridge, the highest in the range features the same aluminium cantilever as the E2, but benefits from a superior bonded, super-elliptical (0.3 x 0.7 mil) stylus. This gives it superior high frequency groove detail retrieval ability over ordinary elliptical (0.4 x 0.7 mil) or spherical (0.6 mil) styli due to its smaller front to back radius. Its main effect is the reduction of sibilance, especially in high level vocal recordings.

Magnetic Duplex Technology:

All cartridges in the range feature Magnetic Duplex Technology - a 'dual magnet' generator assembly which more accurately traces the record groove providing better stereo separation and a more involving and musical sound stage.

Expert Adjustment:

The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever:

Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge.

The E3 model with its refined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

Notes: The Black3 uses a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing.

What's the difference between Black2 and Green2?
Approximately 15% of the Black3 production run meet higher specifications. These are hand selected from the batch and designated as Green3.

Grado's OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

Grado's OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

The Black3 is hand assembled by Grado's team in Brooklyn, with some builders having over 25 years of experience. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. The coil winding techniques using ultra high purity copper wire, which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.

As in all Grado phono cartridges the Black3 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado's patented Flux-Bridger design allows the Black2 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

Notes: The Green3 uses a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing.

What's the difference between Black3 and Green3?
Approximately 15% of the Black3 production run meet higher specifications. These are hand selected from the batch and designated as Green3.

Grado's OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

Grado's OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

The Green3 is hand assembled by Grado's team in Brooklyn, with some builders having over 25 years of experience. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. The coil winding techniques using ultra high purity copper wire, which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.

As in all Grado phono cartridges the Green3 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado's patented Flux-Bridger design allows the Green2 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

Notes: Excellent value upgrade to standard hi-fi turntable styluses. Designed for smooth sound with a balanced tonal presentation. Hand built in Brooklyn by experienced audiophile specialists.

Supplier notes:
The Silver3 uses a four piece OTL cantilever with a Grado specific elliptical diamond stylus mounted on a brass bushing. A machined turned generator is used to achieve a lower distortion and greater transparency.

What's the difference between Gold3 and Silver3?
Approximately 5% of the Silver2 production runs meet higher test specifications. The cartridges that exhibit these specs are hand-selected to become a Gold2.
Grado's OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system.

This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

Grado's OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

The Silver3 are all hand assembled by our team in Brooklyn, with some builders having over 25 years of experience. With the recent development of the highly received Lineage Series of cartridges, we were able to have a trickle down of technology and bring some new techniques to the Silver3.

This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. Our coil winding techniques, using ultra high purity copper wire which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.

As in all Grado phono cartridges the Silver2 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado's patented Flux-Bridger design allows the Silver2 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

The development of the Epoch in the Lineage Series gave us an in-depth experience with using an outer housing as a damping device. This led to the creation of a process which de-stresses the chassis and dissipates unwanted energy & resonant frequencies, allowing the desired signal to travel freely.

Notes: Nagaoka MP-110 the successor to the highly acclaimed and classic Nagaoka MP11 phono cartridge, the new Nagaoka MP-110 phono cartridge extends and strengthens its predecessor's prowess and talents to a new level of radiance. You'll hear more music, more detailed refinement to enjoy and savor. The Nagaoka MP-110 is the cartridge to start with and to keep for a long time.

Features:
-Superfine polished eliptical diamond bonded stylus
-Powerfull samarium cobalt magnet
-Lightweight aluminum alloy cantilever for high fidelity
-Carbon fibre reinforced plastic shoe
-Anti ferro magnetic permalloy shield casing

Stylus replacement: Nagaoka JN-P110

The stylus replacement interval varies depending on the using conditions. But for general use at home, the reference time is between 150-200 hours in which the stylus begin to wear and the tone quality deteriorates. Recommend replacing the stylus as aerly as possible to enjoy clear tone for a long time and not to damge the disc grooves.

Notes: The Sumiko Pearl is a truly unique and precious find within the sea of entry-level phono cartridges. With decades of accolades to its name, the Pearl's smooth, natural sound reproduction breathes life into any recording with poise and transparency. Its diminutive price also belies its colossal ability to pull a complete sonic picture from each record it touches.

Rounding off the budget series with style and aplomb, the Pearl is an affordable audiophile marvel that's sure to delight.

Frequency Response:: 12Hz - 30kHz
Output Voltage: 4.0mV
Load Impedance: 47kO
Channel Seperation: 3dB @ 1kHz
Channel Balance: <0.5dB@ 1kHz
Stylus Type: Elliptical
Compliance: 12x10-6 cm/dyn
Tracking Force Range: 1.5 - 2.0g
Recommended Force: 2.0g
Cartridge Weight: 6.0g

Notes: The Oyster Series' premium Moving Magnet cartridge range features four models with a matching aesthetic, all named after a different type of Oyster.

The Rainier is a venerable cartridge which expands on the company's legacy for smooth, natural sound reproduction in its affordable cartridge models. After years of development, the Rainier features an integrated body and generator system that significantly reduces internal resonances. Finished with an expertly shaped elliptical stylus, the Rainier is capable of extracting even the more nuanced musical details.

The Rainier utilises the same cartridge body as the Olympia and Moonstone, allowing for easy stylus upgrades as your listening system progresses.

Frequency Response:: 15Hz - 25kHz
Output Voltage:: 5.0mV
Internal Impedance: 1.130O
Load Impedance: 47kO
Channel Seperation: 25dB @ 1kHz
Channel Balance: 1.5dB@ 1kHz
Stylus Type: Elliptical
Compliance: 10x10-6 cm/dyn
Tracking Force Range: 1.8g - 2.2g
Recommended Force: 2.0g
Cartridge Weight: 6.5g