100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth module accessories

View:
Options
Artículos del 1 al 10 de 10 en la página 1 de 1
Subscribe to our weekly Studio Equipment emails
Make Noise Skiff Module Case (synth module case)
Cat: 593468 Rel: 04 Jan 16
 
104hp synthesiser module case - requires user to install power solution
Notes: In 2009 Tony designed the first Skiff to complement the vertically oriented cases available at the time by providing an ergonomic enclosure for our Rene and Pressure Points touch controllers.

Today the Make Noise Skiff is updated to provide a smart way to build a small modular synthesizer. It is low cost, but extremely durable. The clean simple lines and matte black color place visual emphasis where the action is; the patch the artist has created.
Read more
 1 in stock $86.86
Click for better price!
quote 593468
Cat: 590217 Rel: 27 May 16
 
Extruded aluminium 60 HP Eurorack case, power module not included
Notes: This is an extruded aluminum Eurorack case with wood sides (no modules included). Up to 1.9" module depth. Requires separate Eurorack power module for use.

Includes sliding nuts and screws.
Read more
 1 in stock $89.51
Cat: 693139 Rel: 02 Jul 18
 
Delay/reverb expansion card for the TipTop Audio Z-DSP Digital Signal Processor
Notes: Mariana Trench is an FDN card for the Z-DSP. Feedback Delay Networks (FDNs) are built around multiple delays which are connected to their inputs thanks to a feedback matrix designed for its stability and lossless properties. FDN can mimic the recursive process of sound waves bouncing back and forth in an acoustic space. They were first suggested for artificial reverberation by Michael Gerzon (1971) and later John Stautner and Miller Puckette (1982) introduced four-channel FDN reverberator with general stability conditions.

FDN can also be used as a special case of digital waveguides, they can be tuned, or also used as complex delays. The Mariana Trench Z-DSP cartridge is designed to explore these more unusual sides of the FDN algorithms. Mariana Trench Z-DSP cartridge is designed by Christophe Duquesne Anckorage - Haken Audio developement team - La Voix du Luthier.
Read more
 2 in stock $67.74
Cat: 706834 Rel: 12 Dec 18
 
20HP metal enclosure for Eurorack modules with built-in power supply
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod20 is 20HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod20 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
 3 in stock $80.41
Cat: 706837 Rel: 12 Dec 18
 
26HP metal enclosure for Eurorack modules with built-in power supply
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod26 is 26HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod26 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
 3 in stock $93.06
Cat: 734252 Rel: 13 Feb 19
 
B-STOCK: Box damaged, product unused & in perfect condition
Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


Custom made Solid Oak Arturia Keystep stand with additional 94 HP Eurorack rails - precision machined to give a snug fit for the Arturia Keystep.

The Keystep sits in a recess to stop it from moving or sliding, gripped by the sides which forms a strong and sturdy stand. The oak has been oiled and is ready to assemble and should stay looking beautiful for a long time.
Read more
 1 in stock $93.96
Cat: 725946 Rel: 25 Mar 19
 
Sensor Pack B - features three useful components for owners of the Field Kit
Notes: The Field Kit Sensor Pack B consists of 3 sensors:

- Accelerometer
- Capacitive Touch
- Sequential Voltage Source
- 2 x Dupont 3 contact cable to connect the Sensors to the Field Kit

Accelerometer:

This board measures acceleration along three axis. Those measurements are used to generate CV signals or triggers. The accelerometer board features three modes:

- Tap Detector with continuous CV output
- Tap Detector with trigger output
- The 'motorcycle mode'

Capacitive Touch:

Connect the Capacitive Touch to organic items and use them as a controller, the Field Kit Sensor Interface will send out signals once you touch the matter. Banana rock, Cucumber Swing, Avocado Samba!

Sequential Voltage Source:

The Sequential Voltage Source is a little magical module which you can use in your musical setup quite easily and allows your Field Kit to become a Sequencer too. This board has three different modes: Stepped Random Voltage, CV Sequencer and a Euclidean Trigger Sequencer.
Read more
 2 in stock $50.66
Click for better price!
quote 725946
Cat: 725945 Rel: 25 Mar 19
 
Sensor Pack A - features five useful components for owners of the Field Kit
Notes: The Field Kit Sensor Pack A consists of 5 sensors:

- Button/Jack
- Electret Microphone
- Light Sensor
- Temperature Sensor
- Ball Switch
- 2 x Dupont 3 contact cable to connect the Sensors to the Field Kit

Button/Jack:

This is rather a utility tool than an actual sensor. It allows you to either use a pushbutton or any CV-Signal (0- 5V) as a signal source. You can select to either use the button or any signal connected to the jack input with the jumper located right next to pin-header. The voltage present at the output upon a button press can be selected with the two jumpers next to the button. The button and jack can be used with both the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Electret Microphone:

The electret microphone provides a simple solution to use your surroundings as a sample source. The board features a little trimmer to adjust the gain of the microphone pre-amplifier. Use a little screwdriver to adjust the gain according to the printing on the sensor board. It's preferable to adjust the signal level with the trimmer first and only use the level pot of the analog signal interface as a second adjustment stage. The electret microphone has an omnidirectional directivity and is capable of capturing the whole frequency spectrum from 20 to 20000 Hz. The electret microphone is best be used with the ANALOG IN of the Field Kit's Sensor Interface.

Light Sensor:

The light sensor will change the output voltage depending on the light intensity. The spectral sensitivity is similar to the human eye, covering the full spectra of visible light, with a peak at 570nm (green/yellow). The change of the voltage according to the light intensity can be set with the three jumpers on the board. Set those jumpers according to printing on the board. The light sensor can be used with the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Temperature Sensor:

The temperature board features two output modes: a continuous CV or a trigger.

CV Mode: The board will output a continuous voltage in range 0 - 5 V depending on the measured temperature and scaled to the set lower and upper temperature limit.

Trigger Mode: The board will generate a trigger whenever the measured temperature rises above the set upper limit temperature. LED 1 will blink whenever a trigger is generated. The sensor covers a temperature range from -55-C to +125-C.

Ball Switch:

The ball switch consists of a little bouncy ball jumping around in a container connecting two contacts and thus acts like a switch. In contrary to a normal push button, which has very well defined states, the switching of a ball switch is more similar to a percussion shaker. There are two resting-positions which define a certain state of the switch: the board is lying flat on the table with its bottom facing the table: the switch is open the board is lying flat on the table with its top facing the table: the switch is closed. The voltage assigned to those states can be set with the two jumpers on the board. Refer to the printing on the board to identify the position that suits your needs. The ball switch can be used with the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.
Read more
 1 in stock $51.70
Click for better price!
quote 725945
Cat: 725503 Rel: 12 Apr 19
 
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod40X Unpowered is 40HP with 2" (51mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
 2 in stock $68.24
Click for better price!
quote 725503
FORTHCOMING
Tiptop Audio Tape Echo ZDSP Cartridge
Cat: 733659
 
Z-DSP tape echo effects card
Notes: TAPE ECHO by Tiptop Audio brings classic tape-based delays to the Z-DSP effects library. Eight expressive algorithms which emulate analogue tape machines and the producers that inspire Tiptop Audio.

With Tape Echo you can do it all - recreate space echo dub sound of Lee "Scratch" Perry and King Tubby or dig deep into the gritty and endless saturated repeats favoured by dub experimenters like Basic Channel and Boards of Canada.

So wide in its functionality, playability and natural in its sound, Tape Echo sits comfortably amongst the greats of the Roland RE-201 Space Echo, Copycat and Maestro Echoplex all while having a unique character of its own.

From wobbly tape to stereo pong, Tape Echo comes with a multitude of expressive settings and presets that allow you to recreate virtually any style of analogue echo or magnetic tape delay or invent your own sound when you adjust the fidelity of the Z-DSP clock!

Tape Echo for the Tiptop Audio Z-DSP is a joy to use. Precision control of the Frequency, Filter and Feedback are clear to read with the Z-DSP display, plus corresponding controls make setting delay times by ear easy and fun to do like its predecessors.
Read more
coming soon $77.55
Artículos del 1 al 10 de 10 en la página 1 de 1

Filter

Synth module accessories
Accesorios
Release Date
Featured
Close