Pedalboards & Pedalboard Accessories

Notes: Love your pedal chain? Rather than tossing your effects and their individual power adapters into a duffel bag after a gig, keep them safe - and ready to rock at a moment's notice - with the Behringer PB1000.

This pedal board makes hooking up twelve 2.5" x 4.5" pedals as easy as hooking up just one (of course, if you're using pedals that aren't 2.5" x 4.5", the snug foam padding can be cut to accommodate pedals of varying shapes). The PB1000 includes 1/4" patch cables, so you can leave your pedals connected to one another, ready to pass signal even when you're transporting them. It also comes with 1 x 12 daisy chain cabling so that when you plug in the 1.7 A power adapter, all your pedals receive power. Meanwhile, all cabling remains safe and free of strain. Failure is almost guaranteed when you're dealing with a rat's nest of loose cabling, but with the PB1000, your effects chain is always safe and organized.

Connect your guitar, bass or keyboard to the single 1/4" input in the upper right corner of the board. A pair of 1/4" From Effects jacks in the upper left corner allow you to connect stereo effects, and two 1/4" Output To Amp jacks send a left and right stereo signal to up to two amps.

When it is time to load out, just unplug the power supply, disconnect your guitar and amp, put the lid back on the PB1000 and slide the locking latches back into place. The high-impact plastic casing will protect your pedals from the rigors of the road.

Notes: Organize your pedals with this padded and lightweight Electro-Harmonix pedal board with bag. Made of durable canvas, enclosing a stiff non-slip board, the EH pedal bag board securely holds effect boxes of all sizes and shapes. Customizable velcro strips and dividers allow a setup to suit your needs. Measuring 27" long by 12" wide by 2" deep, the board has dual handles and a shoulder strap for easy transport. The front offers a separate zippered pouch for smaller items. Plus, cable openings on both sides make plugging in amps and AC a breeze without ever moving your gear. Just open up and you are ready to rock!

Note: Pedals and board showing in the image are not included!

Notes: We've created a convenient, secure way to mount any of the Next Step Effects pedals to a pedalboard. The new Pedalboard Cradle is custom-designed of a lightweight, durable polymer. Measuring 8.875 x 4.375 x 0.625 inches, it adheres to a pedalboard with hook and loop fastener and the pedal rocks freely and securely within the cradle. When the musician is ready to pack up their pedalboard, a security strap locks down the Next Step Effect for transport.

The Electro-Harmonix line of Next Step Effects consists of the Crying Bass, Crying Tone Wah, Expression Pedal, Pan Pedal, Slammi, Talking Pedal and Volume Pedal.

Notes: The MOP-D10 is a multi-output power source that was developed by EHX engineers to provide a player with noise-free pedal operation. It features ten isolated 9VDC outputs that handle the most popular power requirements: 4x100mA, 2x250mA, 2x300mA and 2x400mA.

From its premium analogue power path featuring low-noise linear regulators to its custom-wound toroidal transformer, the MOP-D10 is designed to let a pedal user achieve a sonically pure signal path. Unlike many other multi-output power supplies which rely on switching power conversion, the MOP-D10's transformer-based power conversion is significantly less susceptible to spurious noises leaking into the audio path. An AC Voltage Selector Switch also ensures the MOP-D10 can be used with a range of voltages commonly found around the world.

Each of the MOP-D10's outputs is center-negative and all output power jacks are isolated from each other. The dimensions of each output connector are 5.5mm x 2.1mm. The unit is supplied with a 6' detachable power cord and ten 24" long DC power cables equipped with one straight and one right-angle end. It also includes hardware for pedalboard mounting.

Professional pedalboard power solution with ten isolated 9VDC outputs: 4x100mA, 2x250mA, 2x300mA and 2x400mA
Provides a premium analogue power path with low-noise linear regulators
Custom-wound toroidal transformer delivers exceptional isolation and clean power
Relies on transformer-based power conversion which is superior to switching power conversion
AC Voltage Selector Switch allows the MOP-D10 to be used with a range of voltages commonly found around the world
All output power jacks are isolated from each other for noise-free operation
Comes with ten 24" long DC power cables equipped with one straight and one right-angle end
Includes hardware for pedalboard mounting

Specifications

Dimensions (in): 7.87
Year Released: 2021

Notes: Power up to eight effects pedals on your pedalboard!

If you're tired of noise in your signal chain and if you want to be sure your carefully selected pedals are getting consistent current for their best performance, the EHX S8 Multi-Output Power Supply is your go-to solution. It powers up to eight individual effects pedals with seven 9VDC outputs and one 18VDC output.

Provides one 18V and seven 9V outputs
Each output is individually regulated for maximum performance
Short circuit protection design for the individual outputs
Pedalboard-friendly size, rugged metal chassis
Includes eight power cables

Power Supply: 12V DC power adapter
Outputs: Seven 9V power supply output and one 18V power supply output
Current Source: 9V DC outputs maximum current of 250mA per output
Current Source: 18V DC output maximum current of 150 mA


Specifications

Power Supply
12VDC power adapter included
Dimensions (in)
3.75 x 1.5 x 1.25
Year Released
2019

Notes: Firefly M6 is able to accommodate 6 Micro Series pedals or 5 MICRO pedals & 1 Mini Series pedals. Includes 6 plug multi DC power cable. Specially designed guitar cable plug is compatible to many connect cables.

- Integrated pedal board
- Aluminium construction
- Foam insert
- Place for 6 effects units from Mooer Micro Series, or 5 Micro and 1 Mini Series
- Specially developed recess for jack - compatible with most guitar cable
- Incl. 1 x 6-plug DC power cable (power supply not included)

Notes: - Compact size and simple styling, reflecting the consistent design concept of Mooer products.

- Patented 180 degree folding design, using a customized Aluminium alloy rotatable structure, which can be placed in multiple angles on stage, making it more convenient to access all pedals.

- The Foldable structure makes the Pedal Board more compact, easier to use and ensures accurate operation on the stage; the built-in fixing method and the perfect combination of aluminium alloy make the whole board stronger and lighter with a solid structure.

- The bag features smooth area on the side for logos or labels, as well as an ergonomic handle and strap design which allows the it to be carried in a variety of ways.

Notes: - Compact size and simple styling reflect the consistent design concept of Mooer products.

- A unique injection moulding technology is combined with a custom aluminium alloy to form a rigid lightweight support structure for your pedals.

- A matte black finish is coupled with an excellent non-slip bottom design to ensure stable use on stage.

- The well-designed durable bag can accommodate many popular effects. Durable fabric and thick padding protect your equipment; right-sized for ease of use.

- The bag features a smooth area on the side for logos or labels, and ergonomic handle and strap design. The bag can be carried over the shoulder, or hung on your guitar bag.

Notes: The TF pedalboard series is MOOER's latest instalment to their extensive range of unique pedalboard solutions. It's double platform configuration allows the shape to be easily transformed to accommodate different pedal layouts. The TF pedalboards are designed with both practicality and beauty in mind so you can create the setup you want, keep everything neat and tidy and have a pedal board which looks great!

- TF16: 490 x 285 x 86mm

Notes: The TF pedalboard series is MOOER's latest instalment to their extensive range of unique pedalboard solutions. It's double platform configuration allows the shape to be easily transformed to accommodate different pedal layouts. The TF pedalboards are designed with both practicality and beauty in mind so you can create the setup you want, keep everything neat and tidy and have a pedal board which looks great!

- TF16: 490 x 285 x 86mm

Notes: The TF pedalboard series is MOOER's latest instalment to their extensive range of unique pedalboard solutions. It's double platform configuration allows the shape to be easily transformed to accommodate different pedal layouts. The TF pedalboards are designed with both practicality and beauty in mind so you can create the setup you want, keep everything neat and tidy and have a pedal board which looks great!

- TF16: 490 x 285 x 86mm

Notes: The TF pedalboard series is MOOER's latest instalment to their extensive range of unique pedalboard solutions. It's double platform configuration allows the shape to be easily transformed to accommodate different pedal layouts. The TF pedalboards are designed with both practicality and beauty in mind so you can create the setup you want, keep everything neat and tidy and have a pedal board which looks great!

- TF20: 600 x 285 x 86mm

Notes: The TF pedalboard series is MOOER's latest instalment to their extensive range of unique pedalboard solutions. It's double platform configuration allows the shape to be easily transformed to accommodate different pedal layouts. The TF pedalboards are designed with both practicality and beauty in mind so you can create the setup you want, keep everything neat and tidy and have a pedal board which looks great!

- TF20: 600 x 285 x 86mm

Notes: The TF pedalboard series is MOOER's latest instalment to their extensive range of unique pedalboard solutions. It's double platform configuration allows the shape to be easily transformed to accommodate different pedal layouts. The TF pedalboards are designed with both practicality and beauty in mind so you can create the setup you want, keep everything neat and tidy and have a pedal board which looks great!

- TF20: 600 x 285 x 86mm

Notes: Mains switch-mode power adaptor to operate 9Vdc effect pedals up to 500mA (polarity is pin-negative)

Suitable for NuX effect pedals and most other brands

The box for this item contains :

9Vdc 500mA adaptor

Specifications:
Power supply: 100-240Vac, 50/60Hz
Output voltage: 9Vdc
Output current max.: 500mA
Polarity: Pin-negative
Dimensions: 90 x 80 x 60mm
Connector: DC jack 5.5 x 2.1mm
Weight: 90g

Notes: Zeus Guitar Pedal Power Supply

NU-X have built an enviable reputation as guitar pedal experts and great guitar sound starts with the power source. Using standard 9Vdc power adaptors usually releases unwanted noise into the signal chain and unstable power can adversely affect the operation and even life expectancy of some boutique pedals. Zeus is an extremely low noise, high current power supply designed specifically for audio effect circuits with 6 fully isolated 9V outlets, 3 switchable 9/12/18V outlets and a fully variable 6-12V outlet. This lightweight and efficient power supply has the flexibility and reliability to run a full pedal board, even with multi-effect units added, with problem-free operation.

Extremely low noise circuitry
Fully isolated outputs
Multiple voltage options
High current capacity
Supplied with various DC link cables to havndle most pedal input types
Supplied with a 2-outlet combiner lead with 2.5mm DC plug for higher power units.

Power supply: 100-240Vac, 50/60Hz (IEC)
Outputs: 6 x 9VDC, 3 x 9/12/18vDC, 1 x 6-12Vdc variable (all DC5521 jack)
USB output current: 1.5A (Type-A outlet)
Dimensions: 195 x 101 x 42mm
Weight: 658g

In the box

The box for this item contains :

Zeus guitar pedal power supply
5 x DC jack link cables (5.5x2.1mm) straight to angle 0.5m
5 x DC jack link cables (5.5x2.1mm) straight to angle 0.3m
1 x DC jack reverse polarity cable (5.5x2.1mm) straight to angle 0.5m
1 x DC jack (5.5x2.1mm) to 3.5mm plug cable 0.5m
1 x twin DC jack (5.5x2.1mm) socket to single DC plug (5.5x2.5mm)
1 x IEC power lead

Notes: A discovery born out of necessity, the Old Blood Noise Endeavors Split | Meld is a practical non-destructive way to manage parallel dual-mono and stereo signal paths and adds to the OBNE line of pedalboard friendly utility devices.

As a routing solution that splits two sets of stereo TRS to dual mono TS signal paths (and vice versa), this little passive box of tricks is an ideal route for parallel signal paths in a myriad of creative ways.

Especially useful for stereo pedalboards and setups with devices that have TRS stereo inputs & dual-mono outputs, Split | Meld can also be used to make use of a pedal's TRS effects loop, without the need to fiddle with TRS splitter cables that often can be poor quality and get in the way.

No power supply is needed here - simply connect and go.

Notes: ***B-STOCK: Old version in box, product in perfect working order***


A discovery born out of necessity, the Old Blood Noise Endeavors Split | Meld is a practical non-destructive way to manage parallel dual-mono and stereo signal paths and adds to the OBNE line of pedalboard friendly utility devices.

As a routing solution that splits two sets of stereo TRS to dual mono TS signal paths (and vice versa), this little passive box of tricks is an ideal route for parallel signal paths in a myriad of creative ways.

Especially useful for stereo pedalboards and setups with devices that have TRS stereo inputs & dual-mono outputs, Split | Meld can also be used to make use of a pedal's TRS effects loop, without the need to fiddle with TRS splitter cables that often can be poor quality and get in the way.

No power supply is needed here - simply connect and go.

Notes: Available in two versions, the Palmer Bat Packs are purpose-designed to power multiple stompboxes and pedalboards. They feature high grade, long-life lithium polymer batteries providing 500 mA each from two 9 volt DC centre negative barrel outputs that are fully regulated. Recharging the 4,000 mAh capacity Bat Pack 4000 takes approximately four hours and twice that for the 8,000 mAh Bat Pack 8000. Both come in low-profile all-metal enclosures with 5-segment battery status indicators and convenience type A USB port for charging smartphones or tablets. Run time depends on your pedals' current draw.

Notes: Available in two versions, the Palmer Bat Packs are purpose-designed to power multiple stompboxes and pedalboards. They feature high grade, long-life lithium polymer batteries providing 500 mA each from two 9 volt DC centre negative barrel outputs that are fully regulated. Recharging the 4,000 mAh capacity Bat Pack 4000 takes approximately four hours and twice that for the 8,000 mAh Bat Pack 8000. Both come in low-profile all-metal enclosures with 5-segment battery status indicators and convenience type A USB port for charging smartphones or tablets. Run time depends on your pedals' current draw.

Notes: Universal aluminium Pedalboard for the storage of all commercially available floor effects. The cross bars as well as the height and the tilt of the Pedalboard can be individually adjusted. The cross bars are already covered with Velcro (fleece), a sufficient amount of hook strap is also included. Power supplies and similar peripheral devices can be mounted below the board. For this the Pedalboard features 4 practical hooks on the underside. 2 Elastic bands are supplied - making fixation easy!

This set also features a high-quality padded softcase with an accessory compartment and a shoulder strap.

Notes: Universal aluminium Pedalboard for the storage of all commercially available floor effects. The cross bars are already covered with Velcro (fleece), a sufficient amount of hook strap is also included. Power supplies and similar peripheral devices can be mounted below the board. For this the Pedalboard features 4 practical hooks on the underside. 2 Elastic bands are supplied - making fixation easy!

This set also features a high-quality padded softcase with an accessory compartment and a shoulder strap.

Notes: Universal aluminium Pedalboard for the storage of all commercially available floor effects. The cross bars as well as the height and the tilt of the Pedalboard can be individually adjusted. The cross bars are already covered with Velcro (fleece), a sufficient amount of hook strap is also included. Power supplies and similar peripheral devices can be mounted below the board. For this the Pedalboard features 4 practical hooks on the underside. 2 Elastic bands are supplied - making fixation easy!

This set also features a high-quality padded softcase with an accessory compartment and a shoulder strap.

Notes: Universal aluminium Pedalboard for the storage of all commercially available floor effects. The cross bars as well as the height and the tilt of the Pedalboard can be individually adjusted. The cross bars are already covered with Velcro (fleece), a sufficient amount of hook strap is also included. Power supplies and similar peripheral devices can be mounted below the board. For this the Pedalboard features 4 practical hooks on the underside. 2 Elastic bands are supplied - making fixation easy!

This set also features a high-quality padded softcase with an accessory compartment and a shoulder strap.

Notes: Universal aluminium Pedalboard for the storage of all commercially available floor effects. The cross bars as well as the height and the tilt of the Pedalboard can be individually adjusted. The cross bars are already covered with Velcro (fleece), a sufficient amount of hook strap is also included. Power supplies and similar peripheral devices can be mounted below the board. For this the Pedalboard features 4 practical hooks on the underside. 2 Elastic bands are supplied - making fixation easy! This set also features a high-quality padded softcase with an accessory compartment and a shoulder strap.

Notes: ***B-STOCK: Box damaged, but product is in excellent condition and in perfect working order***


Universal aluminium Pedalboard for the storage of all commercially available floor effects. The cross bars as well as the height and the tilt of the Pedalboard can be individually adjusted. The cross bars are already covered with Velcro (fleece), a sufficient amount of hook strap is also included. Power supplies and similar peripheral devices can be mounted below the board. For this the Pedalboard features 4 practical hooks on the underside. 2 Elastic bands are supplied - making fixation easy! This set also features a high-quality padded softcase with an accessory compartment and a shoulder strap.

Notes: Self-adhesive Hook and Loop Tape 50 mm in width - 1 m long. Ideal for mounting devices on pedal boards.

Notes: With a stable 250 mA on each of the five centre-negative barrel style outlets the compact Palmer PWT 05 MK2 is most suited to virtually any pedalboard size. To deliver clean DC power to your pedals and eliminate ground loops between them and the associated hum the outlets are isolated.

The PWT 05 MK2 is protected against overloading and comes with 25 and 50 cm long connection cables, as well as two Y-cables. The first one, with a black connector, connects two 9 V outputs to increase the current intensity to a massive 500 mA, the other one, with a white connector, connects two 9 V outputs to double the voltage to 18 V. Also included is a 1-into-5 daisy chain that lets you power five pedals from one output if their total current draw does not exceed 250 mA. The rugged enclosure of the Palmer PWT 05 MK2 provides mounting and cable relief options while the IEC mains inlet and voltage selector enable worldwide use.

Notes: The PWT 08 is a universal pedalboard power supply with huge 2,000 mA output capacity and 8 standard centre negative outlets. Two of these are switchable to 9, 12 or 18 volts, and with the included Y cable they can be combined to a single outlet for 21, 24, 30 or 36 volts maximum output. They are isolated from each other and the remaining outlets. Featuring short circuit and overload protection, the PWT 08 is fully regulated to deliver constant voltage. The unit sports a power on LED, bi-colour outlet status LEDs and comes with a set of DC cables and dedicated mains adapter. The PWT 08 is the ideal choice if you have just one or two power hungry pedals or 9 volt effects that can be run on higher DC currents for more dynamics and headroom.

Notes: You will never have to worry about tangled cables again thanks to the Cabli's built in detangler and design which stores the cables in a neat coil.

Prolong the life of your cables by eliminating the issue which causes them to break most often! Few realize, but the reason most audio cables fail is because they become tangled and form kinks. These kinks put stress on the wiring inside, eventually causing them to become noisy or stop working entirely. The Cabli's design prevents cables from becoming kinked, and because of that can extend the life of your cables.

Eliminate cable slack, make your setup look more professional, and keep organized thanks to the Cabli's small housing and ability to store your excess cable length. Additionally, our included hook lets you hang your Cabli on a gig bag or cable rack.

Keep your hands, gear, and clothes clean. There's no need to worry about people stepping on your cable or getting it messy when it's stored within a Cabli. Even if the cable is dirtied, you won't need to worry about it getting you or your gear dirty: the Cabli's housing will hold the cable keeping it off you and your gear.

Wind up your cables faster than you ever thought possible. Thanks to the Cabli's clever design, you can wind up even lengthy 30' braided cables (and 20' rubber cables) in just a couple seconds. This is thanks to its ability to wind both sides of your cable at once and detangle the cable in the process.

Weight: 10 ounces (280 grams).

Dimensions: 7" (17.78 cm) diameter and 1.68? (4.27 cm) thick.

Do not use with any cable with a diameter over 0.3" (7.5mm) (for example, Monster Cables).

Notes: The Cabli Bag is a round black nylon drawstring bag that is 7.48 cm diameter, 7.87 inches high. It can hold up to 5 Cabli units.