Recording Studio Accessories

Notes: The double stand is intended to house two Behringer synthesizers, with the ability to improve the operating position on both.

At the same time, it saves a lot of space on the surface, ideal for optimizing the space in our studios.

The stand includes rubber feet so it won’t scratch or slip.

It is compatible with Model D, K2, Pro 1, Neutron, Cat, Wasp

Notes: This specially designed stand for Elektron Digitakt / Digitone is attached from below to the equipment’s chassis, utilizing its universal VESA mounting points, enabling the use of the equipment in a much more ergonomic inclined position.

By swapping the position of the feet, it is possible to use the equipment in two different positions: lying down and upright.

It can be set up in a matter of seconds and weighs just a few grams.

Each stand features a groove to accommodate silicone feet to prevent the equipment from slipping or scratching.

Includes both side stands, screws for installation, and silicone feet.

Notes: Protective cover and inclined stand. All in one piece. On one side, it's a cover that protects the OP-1, shielding keys, screen, and knobs. But leaving the side connectors uncovered, so you don't have to unplug it to cover it.

It also provides the option to use it as an inclined stand for the OP-1, simply by reversing its position. Fitting snugly around the perimeter of the synthesizer.

The cover is decorated to resemble the recording view of the OP-1.

***The OP-1 is not included, it is shown in the photos for demonstration purposes only. ***

Notes: CoverUp designed two ergonomic support models for the OP-1: Studio and Live versions.

The Studio support has a higher incline and is elevated. This is ideal for seated use, improving screen visibility, and the height allows it to be positioned even behind other desktop equipment.

The Live version of this support has a slight incline and is intended for use in a live or standing situation.

Both supports have rubber feet to prevent slipping and are adorned with two well-known characters that appear on the OP-1.

***Please note: The OP-1 is not included, it is shown in the photos for demonstration purposes only. ***

Notes: CoverUp designed two ergonomic support models for the OP-1: Studio and Live versions.

The Studio support has a higher incline and is elevated. This is ideal for seated use, improving screen visibility, and the height allows it to be positioned even behind other desktop equipment.

The Live version of this support has a slight incline and is intended for use in a live or standing situation.

Both supports have rubber feet to prevent slipping and are adorned with two well-known characters that appear on the OP-1.

Notes: Introducing the Decksaver cover, meticulously crafted for the Allen & Heath CQ-12T mixer. This cover, engineered with exacting precision and made from superior-grade material, offers a bespoke-fit solution that is unrivalled. It provides your CQ-12T with unparalleled defence against common hazards like dust, liquid spills, and accidental knocks or impacts.

Understanding the significance of your mixer as a vital component of your audio setup, this Decksaver cover has been designed to ensure your CQ-12T remains in pristine condition, regardless of the setting. Whether in the studio, at a live performance, or during transportation, the cover acts as a reliable shield, preserving the functionality and aesthetics of your mixer.

Its sleek, transparent design not only delivers robust protection but also showcases the sophisticated build of your CQ-12T, integrating flawlessly with its professional appearance. The precise fit ensures that every knob, fader, screen, and input is covered, yet remains easily accessible for quick setups and teardowns. This design principle means that you don't have to choose between safety and style.

Furthermore, the Decksaver cover for the CQ-12T is lightweight and durable, making it an ideal accessory for DJs on the move. It adds an additional layer of security against the challenges of travel and frequent use, protecting your investment from the wear and tear of the road.

With this Decksaver cover, you acquire not just a protective measure, but a declaration of professionalism. It reflects your dedication to quality and the importance you place on keeping your equipment in its best condition. Embrace the peace of mind and confidence that comes with knowing your Allen & Heath CQ-12T is well-protected, allowing you to concentrate on what you do best; creating and performing music.

Weight: 0.151 kg
Length: 27.4 cm
Width: 23.7 cm
Height: 4 cm

Material: Smoked clear polycarbonate.

Warning: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Conductive Labs have turned complex music theory into a killer synthesizer-jamming MIDI controller with The NDLR.

With four parts that can play up to 8 synths, it's possible to make fantastic electronic music with this device.

These tools we use to compose and produce music are dear to our hearts. Dust, liquid and accidental impact have taken many a good unit down over the years - this is where Decksaver steps in.

Designed exclusively for perfect fit, whilst still accommodating cables, your NDLR arpeggiator can sit ready for operation.

Slides straight into a flight or soft case, or rucksack for maximum protection during transportation.

Shields delicate controls, ports and internal components from damage at home, on the road and on stage.

Dimensions

Weight: 0.399kg
Length: 23.2cm
Width: 15.9cm
Height: 3.4cm

Notes: The IK Multimedia UNO Synth PRO X, celebrated for its outstanding sound design capabilities and intuitive interface, is fast becoming a fixture in the collections of discerning musicians and producers. To address the necessity of preserving this innovative instrument, Decksaver have crafted the Decksaver cover for the IK Multimedia device, designed to offer comprehensive protection. Made from premium-grade polycarbonate, following Decksaver's exclusive formula, this cover is specifically engineered to protect against dust, spills, and unforeseen impacts.

Custom-fit for the PRO X, this Decksaver cover snugly envelops the synthesizer, ensuring all knobs, buttons, and inputs are thoroughly protected without obstructing cable connections. The design prioritises usability, facilitating quick and simple application or removal of the cover, a crucial consideration for dynamic musicians and producers. Whether en route to a live performance, situated in a studio, or kept at home, this cover acts as a solid safeguard, preserving the delicate components of your UNO Synth PRO X from the trials of daily use.

Choosing this Decksaver cover for your UNO Synth PRO X is more than a mere practical decision; it signifies a commitment to keeping your instrument in pristine condition. It is an essential asset for anyone intent on protecting their UNO Synth PRO X, ensuring it stays ready and responsive for every creative pursuit.

Dimensions

Weight: 0.195 kg
Length: 33.8 cm
Width: 15.1 cm
Height: 2.9 cm

Fits

UNO Synth Pro X
Uno Synth Pro Desktop

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: The Korg Drumlogue, renowned for its hybrid drum synthesis and powerful sequencing capabilities, has become an essential tool for percussion aficionados and electronic musicians. In recognition of its enduring popularity, Decksaver are delighted to introduce the cover for the Drumlogue, providing crucial protection for this dynamic instrument. Fashioned from sturdy polycarbonate, this cover is meticulously designed to shield against dust, liquid spills, and accidental knocks.

Precisely tailored to fit the Korg Drumlogue, this Decksaver lid matches the instrument's layout exactly, ensuring that every knob, pad, and connection point is safeguarded while still allowing unimpeded access to cables. The design is focused on ease of use, facilitating swift and effortless application or removal of the cover, an essential aspect for busy musicians and producers. Whether you're taking the Drumlogue to a performance, using it in the studio, or keeping it protected in your home setup, this cover serves as a reliable guard, maintaining the instrument's operational integrity and visual appeal.

Opting for this Decksaver cover for your Drumlogue signifies more than a practical measure; it's a pledge to the sustained care and preservation of your instrument. It represents an invaluable investment for anyone keen to ensure their Drumlogue stays in prime condition, ready for any rhythmic adventure or creative endeavour.

Dimensions

Weight: 0.23 kg
Length: 33.2 cm
Width: 20 cm
Height: 3.4 cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: The PreSonus FaderPort, known for its streamlined workflow enhancement and precision control in music production, has rapidly become a must-have for producers and sound engineers. Due to its growing popularity and users' demand for reliable protection, Decksaver are thrilled to introduce the cover for the PreSonus FaderPort. This cover is crafted from robust polycarbonate, a material renowned for its strength and resilience, designed to shield your FaderPort from dust, liquid spills, and accidental impacts.

Precisely engineered to complement the PreSonus FaderPort, this Decksaver cover provides a perfect fit, encasing every button, fader, and knob, while allowing easy access to connections. This design is intentional, catering to the needs of professionals who value both protection and efficiency. Whether in a busy studio setting, a home recording environment, or on the move, this cover ensures that your FaderPort remains safeguarded, maintaining its functionality and sleek appearance.

Opting for this Decksaver cover for your PreSonus FaderPort is more than a practical choice; it signifies a commitment to preserving the integrity and longevity of your valuable equipment. Highly requested by the Decksaver community, this cover is a testament to the FaderPort's importance in modern music production, offering peace of mind that your device is protected and ready for any creative challenge.

Dimensions

Weight: 0.135 kg
Length: 14.7 cm
Width: 24 cm
Height: 3.7 cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: Introducing the CTRL CASE PUSH 3 - the perfect protective solution for live performers on the go. Custom designed to a hold the new Ableton Push 3 and is a very lightweight and convenient solution to carry the standalone instrument well protected to your next studio or live session. Crafted from rigid Durashock moulded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize power plug, audio cables and accessories.

Fits

Ableton Push 3
Ableton Push 2
Ableton Push

Specs

Outer measures: 43 x 37 x 10,5 cm
Inner measures: 39 x 33 x 5 cm
Weight: 1,3 kg

Notes: The Magnetic Mount is a versatile magnetic mounting system for attaching microphones, lights and other accessories to any MagSafer iPhoner or other smartphone with a magnetic case. It features an ultra-strong magnet for complete security, even with vigorous use, and comes with three removeable attachments for maximum flexibility. This includes both short and long cold shoe arms for shooting in landscape or portrait mode, plus a long arm for mounting your smartphone onto a tripod, handle or desktop arm for use in a wide range of video or content creation applications.

Mechanical specifications- Magnetic Mount

Weight (grams): 75
Dimensions (millimetres):
Length: 57
Width: 12
Height: 57

Mechanical specifications- long cold shoe arm

Weight (grams): 15
Dimensions (millimetres): Length: 22
Height: 97

Mechanical specifications- short cold shoe arm

Weight (grams): 9
Dimensions (millimetres): Length: 22
Height: 52

Mechanical specifications - 14 inch tripod mount

Weight (grams): 31
Dimensions (millimetres): Length: 28
Height: 113

What's in the box

1 x Magnetic Mount
1 x Long Cold Shoe Arm
1 x Short Cold Shoe Arm
1 x 1/4-inch Tripod Mount

Notes: Turn your smartphone into a professional filmmaking rig with the RODE Phone Cage. This magnetic mobile filmmaking cage features an ultra-secure mounting system for attaching a MagSafer iPhoner or other smartphone with a magnetic case. Five cold shoe mounts allow for easy mounting of a wide range of accessories, including microphones and lights, with in-built cable management ensuring your rig stays neat and tidy. Conveniently placed 14-inch and 3/8-inch threads facilitate connecting even more accessories, including handles and tripods, allowing you to customise it to your needs. The Phone Cage is made from lightweight aluminium and is incredibly rugged, perfect for outdoor use and run-and-gun filmmaking.

Magnetic mobile filmmaking cage
MagSafer compatible
In-built cable management slots
Five cold shoe mounts for attaching microphones and lights
14-inch and 3/8-inch threads for use with tripods, handles and other accessories
Facilitates portrait and landscape shooting

Mechanical specifications

Mounting Options:
Cold Shoe Mounts: 5
Standard 1/4-inch Thread: 14
ARRI 1/4-inch Thread: 17
3/8-inch Threads: 2

Weight (grams): 285
Dimensions (millimetres):
Length: 245
Width: 35.5
Height: 126

What's in the box

1 x Phone Cage
1 x Magnetic Phone Mount
1 x Locking Screw

Notes: The VESA Mount is a sturdy adjustable mount for products fitted with VESA mounting screws, such as the RODECaster Pro II and RODECaster Duo. It features a locking ball head that can rotate 360 degrees for easy manoeuvring of the device in any orientation.

The mount attaches to any standard microphone stand or studio arm, and is the perfect way to position your device in a range of scenarios.

Note - not compatible with the original RODECaster Pro.

Suits both 100 and 75mm VESA mounts
360-degree ball head mount
Easy-to-use cam to lock in any position
Attaches to any standard microphone stand or sudio arm

Mechanical specifications

Weight (grams): 400g (including screws)
Dimensions (millimetres):
Length: 140
Width: 140
Height: 90
Compatible RODE Products: RODECaster Pro II, RODECaster Duo