Recording Studio Accessories

Notes: 1.5mm thick zinc coated steel equipment racks finished in black scratch resistant textured powder coated paint. Supplied in flat packed kit form for easy self assembly.

Notes: Protective carry case with a soft velvet liner shaped for UNIT-4. Featuring a comfortable strap and netting pockets to bring your whole setup on the go.

Notes: Pulse case for 13" Macbook Pro or Air

This case is compatible with the 13" M1 MacBook Pro, and the M1 and M2 MacBook Air. It is also compatible with all 2016 - 2019 13" MacBook Pro models, and the 2018-2019 MacBook Air models.

The ultimate case for your 13" MacBook Pro or Air! The Analog Cases PULSE MacBook Pro or Air Case has been carefully designed to the unique needs of highly mobile creative professionals. If you demand the highest level of protection for your MacBook Pro, the PULSE Case will deliver.

The case features a die-cut EVA foam insert that is custom-fitted to the exact dimensions of the 13" MacBook Pro or Air. In the unfortunate event of any falls, the EVA material is shock-resistant and will absorb the blow to prevent any damage to your laptop.

A spacious storage area underneath the laptop has a dedicated compartment for your charger, plus an additional large compartment that is a perfect fit for many popular external hard drives such as LaCie or Western Digital. The upper lid of this case features two additional storage pockets for your cables and accessories.

This case also features a super-soft velvet interior lining, ballistic nylon exterior, comfortable and ergonomic handle, and the signature sleek and minimalist aesthetics.

Description

Whether you're a music producer, photographer, video editor, or podcaster, you'll appreciate the serious protection, versatile storage options, and compact design of the rigid molded case.

The PULSE MacBook Pro or Air case is the ONLY case that features a die-cut EVA foam insert that is custom-fitted to the exact dimensions of the 13" MacBook Pro or Air.

As a creative professional, your external hard drive, battery packs, and cables are just as important as your laptop itself. That's why this case has been designed for maximum versatility and storage capacity. A spacious storage area underneath your MacBook Pro has a dedicated compartment for your charger, plus two other large compartments.

And that's not all. The upper lid of this case features two additional storage pockets for your cables and accessories, which are separated by a padded divider to keep everything organized and protected. The storage pockets can be securely sealed with a velcro strap to ensure that your gear remains in place during travel.

Specifications

Die-cut EVA foam insert customized to the exact dimensions of the 13" MacBook Pro

3 dedicated storage compartments for accessories that measure:

- 10.35" x 2.68" x 1"
- 6.73" x 5.83" x 1"
- 3.62" x 3.15" x 1"

2 interior storage pockets, each measuring 13.58" x 6.5"
Exterior case dimensions: 14.33" x 9.76" x 3.11"
Weight: 3.4 lbs

Notes: Transport case for 14" Macbook Pro

This carrying case from Analog Cases is specially designed for the 14" Macbook Pro.

In contrast to conventional nylon bags, the cases of the PULSE line are made of sturdy EVA (a moulded polymer that has so far only been used for high-quality housings in consumer electronics). It retains its shape and provides excellent protection. The sturdy carrying strap and low weight make the PULSE Case the ideal companion for a variety of common mini controller keyboards, smaller electronic musical instruments or audio interfaces. Inside, the separate nylon mesh pocket brings order to the cable chaos.

Analog Cases stands for practical and stylish design. The robust and lightweight bags are designed for modern music creators whose equipment is as mobile as their lifestyle. About its name, the manufacturer says:

"The name Analog Cases reflects our design philosophy: Bags should be simple, cool and stylish. For us, analogue is more than just a kind of sound - it's a way of life. Analogue means timeless, creative and beautiful. That's what motivates us to make music, and it's what motivates us to create cases."

Notes: The ultra-mobile MPC One deserves an ultra-mobile case. But you don't need to sacrifice protection for the sake of mobility. Our new PULSE case is easy to travel with, but it won't let you down. It's been carefully designed with premium materials, and it's custom-molded to the exact dimensions of the MPC One.

This case features a die-cut foam insert, so your MPC One will be totally secure and cushioned. With separate cut-outs on both sides of your MPC One, it's easy to reach in and remove your machine from the case. The exterior is molded from extra-thick EVA material that's rigid and holds its shape.

Whether you pack this case into a larger backpack or rolling suitcase, or carry it by the spacious and lightweight handle, its a great solution for protecting your MPC on the go.

Interior dimensions: 10.75 x 11 x 2.5 inches

Notes: The PULSE case is the perfect case for your Akai APC64: an ideal travel solution for mobile producers and musicians.

PULSE cases are made of rigid moulded EVA material that is durable and lightweight, while providing excellent protection. The 100% premium materials include a ballistic nylon exterior, super-soft velvet interior, and an ultra-smooth zipper.

With a spacious storage pocket for cables, and a comfortable handle, this case comes equipped with all the features you'll need for travel. Ultra-compact and totally flat, it can also pack easily into your backpack, carry-on, or a larger flight case.

PULSE Case For Akai APC64
Perfect fit for the Akai APC64
Rigid moulded case that provides excellent protection
Super-soft velvet interior and spacious pocket for cables
Compact and lightweight

Specifications

Perfect fit for your Akai APC64
Versatile and lightweight
Spacious and comfortable handle
High-quality Analog Cases logo zipper puller
Exterior Dimensions: 17.90 x 13.20 x 2.00 Inches

***Please note: the APC64 is not included, it is shown in the pictures for demonstration purposes only. ***

Notes: The ultimate case for your 16" or 15" MacBook Pro! Compatible with the 2022, 2021 or 2020 16" MacBook Pro, or the 2016-2019 15" MacBook Pro.

The Analog Cases PULSE MacBook Pro Case has been carefully designed to the unique needs of highly mobile creative professionals. If you demand the highest level of protection for your MacBook Pro, our PULSE Case will deliver.

The case features a die-cut EVA foam insert that is custom-fitted to the exact dimensions of both the 16" / 15" MacBook Pro. In the unfortunate event of any falls, the EVA material is shock-resistant and will absorb the blow to prevent any damage to your laptop.

A spacious storage area underneath the laptop has a dedicated compartment for your charger, plus two other large compartments that are a perfect fit for many popular external hard drives such as LaCie or Western Digital. The upper lid of this case features two additional storage pockets for your cables and accessories.

This case also features a super-soft velvet interior lining, ballistic nylon exterior, comfortable and ergonomic handle, and our signature sleek and minimalist aesthetics.

Description

Whether you're a music producer, photographer, video editor, or podcaster, you'll appreciate the serious protection, versatile storage options, and compact design of our rigid molded case.

The PULSE MacBook Pro case is the ONLY case that features a die-cut EVA foam insert that is custom-fitted to the exact dimensions of the 16" or 15" MacBook Pro.

As a creative professional, your external hard drive, battery packs, and cables are just as important as your laptop itself. That's why this case has been designed for maximum versatility and storage capacity. A spacious storage area underneath your MacBook Pro has a dedicated compartment for your charger, plus two other large compartments.

And that's not all. The upper lid of this case features two additional storage pockets for your cables and accessories, which are separated by a padded divider to keep everything organized and protected. The storage pockets can be securely sealed with a velcro strap to ensure that your gear remains in place during travel.

Specifications

Die-cut EVA foam insert customized to the exact dimensions of the 16" or 15" MacBook Pro

3 dedicated storage compartments for accessories that measure:
- 12" x 3.3" x 1.1"
- 7.2" x 3.2" x 1.1""
- 3.7" x 3.2" x 1.1"

2 interior storage pockets, each measuring 15.4" x 8.3"

Exterior case dimensions: 18.75" x 12.5" x 3.25"
Interior case dimensions: 16.4" x 11" x 3"
Weight: 3.4 lbs

Notes: Building off the legacy of Analog Cases' best-selling KeyStep case, the PULSE Case for the new KeyStep Pro provides the same great protection you've come to expect from Analog Cases. This case is custom-molded to the exact dimensions of the KeyStep Pro, providing a perfect fit. Space for the power supply is also included.

Description:

If you're looking for a quality travel case for your KeyStep Pro, don't settle for a generic bag that doesn't have the proper fit. This PULSE case is made from sturdy molded EVA material that's rigid and holds its shape. It looks great and provides proper protection while you're on the move.

Analog Cases use premium materials that are made to last, so you'll never have to worry about your KeyStep Pro when it's packed up. With its durable exterior, soft velvet lining, and interior pocket for extra storage, this case is all you'll need to keep your KeyStep Pro in good condition and working properly.

Specifications:

Perfect fit for your Arturia KeyStep Pro + power supply

Durable and lightweight

Comfortable molded handle

Extra large premium zipper

Spacious interior pocket

Interior dimensions: 24.5 x 8.5 x 2.5 inches

Exterior dimensions: 26.25 x 11 x 3.25 inches

Notes: This PULSE case is molded to the exact dimensions of the Arturia MicroFreak / MiniLab / MicroBrute. It provides excellent protection for your synth, and is extremely lightweight.

PULSE cases are made from rigid EVA that holds its shape, and they feature a molded rubber handle that's tough and comfortable. This case also includes a nylon mesh compartment for holding your cables.

Weighing in at only 1 pound, this case is a breeze to haul around town. It looks great and is built to last, and can also be used to carry a wide variety of smaller devices.

Perfect fit for your Arturia MicroFreak, MiniLab or MicroBrute

Separate compartment for holding cables

Spacious and comfortable handle

Bottom foam insert to protect your keyboard (removable)

Interior dimensions: 15.25 x 9.25 x 2.5 inches

Exterior dimensions: 16.5 x 10.5 x 3.25 inches

Notes: The perfect lightweight travel case for your Analog Rytm or Analog Four MKII. Whether you pack it into a suitcase, or carry it by its comfortable and spacious handle, this case is a user-friendly way to protect your machine on the go.

PULSE cases are made from molded EVA that provides excellent protection. This case is enhanced with extra-thick EVA material, so it's especially rigid and sturdy, and there's an extra layer of foam along the bottom to cushion your machine. The case also includes a nylon mesh compartment for holding your power supply or cables.

Although it's designed specifically for the Rytm, this case also works well for other Elektron machines like the Octatrack, Digitakt, etc, making it a versatile solution for traveling with many different types of hardware gear.

Perfect fit for your Rytm or Analog Four MKII + cables

Ergonomic molded handle

Interior velvet lining with molded EVA foam for additional protection

Extra large premium zipper

Interior dimensions: 16.25 x 9 x 2.75 inches

Notes: The perfect lightweight travel case for your Digitakt or Digitone! Just zip it up and go make music anywhere. Analog Cases' durable PULSE cases are designed for mobile electronic musicians.

Description:

PULSE cases are made from molded EVA that holds its shape and provides excellent protection. This case is designed to hold the Digitakt or Digitone along with its power supply, and it also includes a nylon mesh compartment for holding your cables.

Specifications:

Perfect fit for your Digitakt or Digitone + cables

Versatile and lightweight

Spacious and comfortable handle

High quality Analog Cases logo zipper puller

Interior dimensions: 10.25 x 7.25 x 2.75 inches

Notes: Pulse case for Elektron Digitakt / Syntakt / Digitone

The perfect lightweight travel case for your Digitakt, Syntakt, or Digitone! Just zip it up and go make music anywhere. Our durable PULSE cases are designed for mobile electronic musicians.

PULSE cases are made from moulded EVA that holds its shape and provides excellent protection. This case is designed to hold the Digitakt or Digitone along with its power supply, and it also includes a nylon mesh compartment for holding your cables.

Specifications

Perfect fit for your Digitakt or Digitone + cables
Versatile and lightweight
Spacious and comfortable handle
High quality Analog Cases logo zipper puller
Interior dimensions 10.25 x 7.25 x 2.75 inches

Notes: The Elektron Model Samples/Cycles are perfect for making music on the go. But we all know traveling with gear comes with risks. Unlike soft nylon bags, this PULSE case is made from sturdy molded EVA material that will provide peace of mind for mobile musicians.

Description:

Custom-designed to the exact dimensions of the Model Samples /Model Cycles, it features a rigid exterior, soft, velvet-lined interior, and a nylon mesh pocket for cable storage. You won't have to worry about the safety of your machine when it's in this PULSE case.

Specifications:

Perfect fit for your Model Samples or Model Cycles + cables

Durable and lightweight

Spacious and comfortable handle

Interior mesh pocket

Interior dimensions: 11 x 7.25 x 2.25 inches

Notes: Protect your Octatrack! The Elektron Octatrack is one of the most important and iconic machines for performing live electronic music. If you tour or perform live with your Octatrack, this is just the case for you.

Description:

This PULSE case is custom designed for the Octatrack. It's molded to the exact length of the machine, but we've also included additional space for holding your power cable.

The top lid of the case includes a layer of dense sponge foam, to protect the delicate fader and knobs of your machine. The body of the case is reinforced with extra-thick molded EVA foam, to survive the rigors of the road.

Whether you pack this case inside a suitcase, or carry it using the spacious and comfortable handle, it's the perfect lightweight solution to keep your machine in great shape. As an added bonus, this case can also be used for the Analog Rytm MK1 or Analog Four MKI.

Specifications:

Perfect fit for your Octatrack + power supply

Sponge foam lining in top lid to protect your fader and knobs

Interior velvet lining with molded EVA foam for additional protection

Extra-large premium zipper

Spacious and comfortable handle

Interior dimensions: 14 x 9 x 2.5 Inches

Exterior dimensions: 14.75 x 10.5 x 3.5 Inches

Notes: This PULSE case was designed with one thing in mind: keeping your MicroKorg / MicroKorg XL+ in good condition and working properly. There's no need to settle for a generic gig bag. This is the one you've been waiting for!

Description:

This lightweight and user-friendly case is custom molded to the exact dimensions of the MicroKorg / MicroKorg XL+. Its rigid exterior will provide excellent protection for your synth.

Made with high-quality, durable materials, this case features a velvet-lined interior that will give you peace of mind when traveling with your MicroKorg. And this case also has a spacious interior pocket for storing your cables.

Specifications:

Perfect fit for your Korg MicroKorg / MicroKorg XL+

Separate compartment for holding cables

High-quality, premium handle designed for comfort

Extra-large premium zipper

Interior dimensions: 22 x 9 x 3.75 inches

Exterior dimensions: 23.75 x 11 x 3.75 inches

Notes: The PULSE Case for the Korg Minilogue XD Module is the perfect solution for making this compact desktop module even more portable! The PULSE Case has been designed for making transporting the Minilogue XD Module a breeze! The rigid, lightweight EVA material and molded plastic handle will give you the confidence to become even more portable with your desktop synthesizer.

The PULSE Case is made of a durable EVA material and is custom molded to fit the exact specifications of your Minilogue XD. The EVA material is designed to withstand some harsh conditions and will protect your Minilogue XD from any unintentional drops or spills. You'll feel confident as you safely transport your device without it shifting or moving around inside when you're on the move.

The case's interior is lined with high-quality felt material to protect the LCD screens and metal surface from scratches when you're on the move. The lid of the case also features a mesh pocket for storing additional cables or patch notes you might have. The case also includes enough room inside for the wall wart of your Minilogue XD. From studio A to the live environment, the PULSE case is the easiest way to transport and protect your Miniogue XD module.

Specifications

Perfect fit for your Korg Minilogue XD Module
Made from lightweight and durable EVA material
Internal storage pocket for cables
Custom molded interior
High-quality black velvet lining
Exterior: (22.17 x 11.81 x 4.57) Inches

Notes: One of the coolest mini-synths of all time now has the perfect PULSE case! This case is custom designed to the exact dimensions of the Korg Monologue.

Description:

Your battery-powered Monologue is perfect for mobile jamming. Take it anywhere and everywhere with this case! PULSE cases are made from lightweight and durable molded EVA, with shock-resistant padding that protects your synth.

Inside the case, there's a super-soft velvet lining, an extra layer of foam along the bottom to cushion your Monologue, and a spacious mesh pocket for holding your cables. You'll also appreciate the comfortable molded handle, and extra-large premium zipper.

Although it's designed specifically for the Monologue, this case can also fit many other types of mini-synths and hardware devices, making it a great multi-purpose solution.

Specifications:

Perfect fit for your Monologue + cables

Spacious and comfortable handle

Extra-large premium zipper

Super-soft velvet lining

Interior dimensions: 15.25 x 11 x 2.75 inches

Exterior dimensions: 16.25 x 12.75 x 4.25 inches

Notes: Introducing the PULSE Case for the Make Noise 0-Coast and 0-CTRL, which can store two Make Noise modules in one very convenient case. Analog Cases have included two cutouts in the case to transport the power supplies below the modules, and the included mesh pocket gives you plenty of space for storing patch cables. Of course, this case can also fit the new Make Noise Strega as well, so your mobile modular performance options are almost limitless!

The PULSE Case for the dual Make Noise instruments is made with durable EVA plastic, the same lightweight material used for football helmets and surfboards. With a PULSE Case, you can toss these synths in your backpack and take it anywhere to jam. Inside the top lid, there's a mesh pocket for storing patch cables, so that you can keep everything for your jam together in one place.

The PULSE Case for the Make Noise 0-Coast and 0-CTRL is molded to the exact dimensions of the semi-modular instruments, so you won't have to worry about the analog components getting damaged when you take your synths on the road.

Specifications

Perfect fit for the Make Noise 0-Coast and 0-CTRL
Made from lightweight and durable EVA material
Internal storage pocket for cables
Custom-molded and die-cut interior
High-quality black velvet lining
Exterior: (15 x 8.82 x 3.31) Inches

Notes: The perfect case for your Make Noise 0-Coast, 0-CTRL, Strega or Moog Werkstatt-01 with CV expander! Just zip it up and go make music anywhere. These lightweight and durable PULSE cases are designed for mobile electronic musicians.

Description:

PULSE cases are made from molded EVA that holds its shape and provides excellent protection. This case is designed to hold the 0-Coast along with its power supply, and it also includes a nylon mesh compartment for holding your cables.

Specifications:

Perfect fit for your 0-Coast, 0-CTRL, or Werkstatt + cables

Versatile and lightweight

Spacious and comfortable handle

High quality Analog Cases logo zipper puller

Interior dimensions: 11 x 6.5 x 1.5 inches

Notes: The Maschine+ is a dream come true. With Native Instrument's latest update to the Maschine family, you can finally leave your laptop at home and make beats literally anywhere. With great power comes great responsibilities, and your responsibilities include making fire beats and keeping your Maschine in working condition!

Description:

Analog Cases have worked tirelessly to create top of the line travel cases, and othe Maschine+ case is no exception. Taking such a powerful piece of studio equipment on the road can be quite scary without a case, and traveling with the original box is not only an eyesore, but it takes away from the portability of the Maschine.

PULSE Cases are custom molded to precisely fit the Native Instruments Maschine+ and Maschine MK3, which keeps the travel footprint extremely small. You can easily throw the PULSE Case for the Maschine in your backpack, or carry it with the comfortable cloth handle. All of Analog Cases' PULSE Cases are made of durable molded EVA material, so no matter where you're making beats, your Maschine will be fully protected.

Specifications:

Perfect fit for your Native Instruments Maschine MK3 or Maschine+

Customized die-cut foam insert that keeps your machine secure

Soft interior velvet lining

Rigid molded exterior that holds its shape and provides excellent protection

Spacious and comfortable handle

Interior dimensions: 12.5 x 11.75 x 2 Inches

Exterior dimensions: 15.75 x 14.25 x 2.5 Inches

Notes: The Polyend SEQ is a crucial piece of your live electronic music setup. Whether you're on tour, or just jamming with friends, make sure it's protected with the new PULSE case.

Description:

Your Polyend SEQ needs a case that's built to last. PULSE cases are made from durable EVA material and custom designed to the exact dimensions of your machine. The case has an extra inner space for holding your power supply, plus a separate compartment for cables.

With a soft velvet lining, this case will keep the wood panels safe and guard the knobs and screen. This case also has a sturdy, spacious handle and high quality zipper.

Specifications:

Perfect fit for your Polyend Sequencer + cables

Versatile and lightweight

Spacious and comfortable handle

High quality Analog Cases logo zipper puller

Interior dimensions: 25 x 7 x 2 inches

Notes: Transport bag for Roland SH-4D

This carrying case from Analog Cases is specially designed for the Roland SH-4D synthesizer.

In contrast to conventional nylon bags, the cases of the PULSE line are made of sturdy EVA (a moulded polymer that has so far only been used for high-quality housings in consumer electronics). It retains its shape and provides excellent protection. The sturdy carrying strap and low weight make the PULSE Case the ideal companion for a variety of common mini controller keyboards, smaller electronic musical instruments or audio interfaces. Inside, the separate nylon mesh pocket brings order to the cable chaos.

Analog Cases stands for practical and stylish design. The robust and lightweight bags are designed for modern music creators whose equipment is as mobile as their lifestyle. About its name, the manufacturer says:

"The name Analog Cases reflects our design philosophy: Bags should be simple, cool and stylish. For us, analogue is more than just a kind of sound - it's a way of life. Analogue means timeless, creative and beautiful. That's what motivates us to make music, and it's what motivates us to create cases."

Notes: The compact VERSELAB lets you produce music in any environment, so we created the PULSE Case for the Roland Verselab MV-1 as the ideal travel companion. The fluid hands-on workflow of the VERSELAB makes it an excellent choice for anyone trying to capture creativity on the spot. With our lightweight and durable PULSE Case, you'll be able to take that creativity on the road.

The PULSE Case for the Roland Verselab MV-1 has enough space for the power supply, and it has an interior pocket in the lid that lets you store extra cables. The case has been molded to the exact dimensions of the VERSELAB, so it has a minimal footprint allowing it to be easily transported. There's even a durable plastic handle for picking up the case and carrying it around without dropping the verse lab.

The VERSELAB was designed for not only beatmakers but vocalists too. With the PULSE Case for the Verselab, you can make and room your recording booth to capture the reverb or just for inspiration. When you pack the MV-1 into your case, you quickly toss it in your backpack or the trunk of your car, and you won't have to worry about the instrument getting damaged.

Specifications

Perfect fit for your Roland Verselab MV-1
Internal storage pocket for cables
Made from lightweight and durable EVA material
Custom molded interior
High-quality black velvet lining
Interior: (15.39 x 8.54 x 2.95) inches
Exterior: (16.22 x 10.04 x 3.31) Inches

Notes: Your powerful and lightweight KeyStep 37 will instantly become portable with a proper case to protect it during travel. From composing in your DAW to jamming with hardware, the KeyStep 37 can go with you anywhere with this PULSE Case.

Description:

The PULSE Case for the Arturia KeyStep 37 was designed by musicians to be highly versatile for all your mobile mobile scenarios, from tossing it in the trunk to packing it inside your luggage. The KeyStep 37 case is made from rigid EVA material that holds its shape, and is shockproof and water-resistant.

This PULSE Case features an interior mesh pocket that can store any extra cables, as well as an ultrasoft velvet interior lining to prevent any scratches on the surface of the KeyStep 37. With the PULSE Case, you'll never have to worry about traveling with your controller, so you can focus on making great music!

Specifications:

Perfect fit for your Arturia KeyStep 37

Comfortable molded handle

Interior pocket for holding cables

Versatile and lightweight

Interior dimensions: 22.25 x 7 x 3 inches

Exterior dimensions: 23 x 8 x 3.5 inches

Notes: Dismantling a stage after a gig, or putting your studio back in order, is much easier when cables are organized. Behringer's Ultrapatch Pro PX3000 helps you conserve space in the studio or on stage, protect your cables and keep them orderly and tangle free.

This 48 point patchbay features high quality, fully balanced 1/4" TRS jacks. The multi functional PX3000 is the ideal way to gain control over the cable runs in your studio. Crawling around under your desk searching for cables will become a thing of the past.

PX3000's three modes are user assignable via the top panel switches and function as follows:

Normal - Interconnects the two rear jacks of one channel; inserting a plug into one of the front jacks interrupts the connection of the rear jacks
Half Normal - Interconnects the two rear jacks of one channel; inserting a plug into the lower front jack interrupts the connection of the rear jacks
Thru - Interconnects each rear jack with its corresponding front jack

The Behringer Ultrapatch Pro PX3000 makes it easy to stay organised and conserve space. Plug into this incredibly useful audio solution and see how it streamlines your stage and studio. Your knees will thank you!

Notes: Custom backpack for the BOSS RC-505mkII and RC-505 Loop Stations

Transport your RC-505mkII or RC-505 in style with the CB-RC505, a premium backpack-style carrying bag for BOSS's popular tabletop Loop Stations.

The slimline design is light and easy to carry, while the plush internal padding fully protects your RC when you're on the move. There's also a sub-compartment for stowing a laptop or tablet, plus a large outside pocket for essential looping accessories.

Creative Magic Everywhere You Go

The RC-505 series eliminates the need to carry lots of additional gear, thanks to its onboard multi-effects, integrated mixing features, and versatile connectivity options. This bag's slim design is just right for users of the tabletop Loop Station, trimming unneeded bulk while providing a protective home for the instrument and core items you need to create and perform.

Smart Onboard Storage

The outside pocket on the CB-RC505 is big enough for a mic, headphones, AC adaptor, and cables, standard accessories for beatboxers and other vocal-based loop performers. And with the flat pocket inside the main compartment, you can expand your creative setup with a laptop or tablet. If you're a looping instrumentalist who needs more room for foot pedals and other external gear, the CB-BU10 Utility Gig Bag is an ideal option.

Premium Construction

The CB-RC505 is built to last with quality materials and construction throughout. The water-resistant nylon exterior is rugged and protective, and there are two thick rubber feet for impact protection when setting the bag on the ground. The padded top handle is comfortable to grab and reinforced for years of travel, and you can easily hide the backpack straps in dedicated pockets when they're not needed.

Custom backpack for the BOSS RC-505mkII and RC-505 Loop Stations
Rugged construction with water-resistant nylon
Plush interior with thick padding
Hideaway backpack straps and handle with comfortable padding
External pocket for a microphone, AC adaptor, and other accessories
Slim sub-compartment for a laptop or tablet
Thick rubber bottom feet
Heavy-duty zipper with custom BOSS pull

Specifications

Compatible Models: RC-505MK2, RC-505
Main Material: Nylon cloth (front cloth), Polyester (inner cloth)

Size & weight
Dimensions (excluding protruding parts):
470 (W) x 310 (D) x 185 (H) mm
18-9/16 (W) x 12-1/4 (D) x 7-5/16 (H) inches
Weight: 1.28 kg / 2 lbs 14 oz

Notes: Introducing the Ergonomic Studio Stand for Ableton Push 3: a game-changer in the world of music production. Designed with your comfort and productivity in mind, this stand is the ultimate solution for those seeking a more immersive and ergonomic music-making experience.

Crafted with precision, the stand offers a sleek and sturdy design that seamlessly integrates with your Ableton Push 3 controller. By elevating your controller to an optimal height and angle, it eliminates the strain on your wrists and neck, allowing you to focus on your creativity without any discomfort.

One of the standout features of this stand is its ability to enhance your visual experience. With a specially designed screen mount, it brings the Ableton Push 3's display closer to your line of sight, ensuring crystal-clear visibility of every detail. No more squinting or straining your eyes to read parameters or follow your music-making process. The screen becomes an extension of your creativity, effortlessly accessible at all times.

The stand's ergonomic design also promotes a more organized and efficient workspace. Its integrated cable management system keeps your cables neat and tangle-free, reducing clutter and allowing you to concentrate fully on your music production. Additionally, the stand's robust construction ensures stability, even during intense sessions, guaranteeing a secure and reliable platform for your Ableton Push 3.

Whether you're a professional music producer or an aspiring artist, the Ergonomic Studio Stand for Ableton Push 3 offers unparalleled comfort and convenience. It enhances your workflow, minimizes physical strain, and maximizes your creative potential. Take your music production to new heights with this exceptional accessory that is both stylish and functional.

Upgrade your studio setup today and revolutionize the way you create music with the Ergonomic Studio Stand for Ableton Push 3. Experience comfort, visual clarity, and an improved working environment that will elevate your musical journey to new levels of excellence.

Notes: Introducing the Ergonomic Studio Stand for Ableton Push 3: a game-changer in the world of music production. Designed with your comfort and productivity in mind, this stand is the ultimate solution for those seeking a more immersive and ergonomic music-making experience.

Crafted with precision, the stand offers a sleek and sturdy design that seamlessly integrates with your Ableton Push 3 controller. By elevating your controller to an optimal height and angle, it eliminates the strain on your wrists and neck, allowing you to focus on your creativity without any discomfort.

One of the standout features of this stand is its ability to enhance your visual experience. With a specially designed screen mount, it brings the Ableton Push 3's display closer to your line of sight, ensuring crystal-clear visibility of every detail. No more squinting or straining your eyes to read parameters or follow your music-making process. The screen becomes an extension of your creativity, effortlessly accessible at all times.

The stand's ergonomic design also promotes a more organized and efficient workspace. Its integrated cable management system keeps your cables neat and tangle-free, reducing clutter and allowing you to concentrate fully on your music production. Additionally, the stand's robust construction ensures stability, even during intense sessions, guaranteeing a secure and reliable platform for your Ableton Push 3.

Whether you're a professional music producer or an aspiring artist, the Ergonomic Studio Stand for Ableton Push 3 offers unparalleled comfort and convenience. It enhances your workflow, minimizes physical strain, and maximizes your creative potential. Take your music production to new heights with this exceptional accessory that is both stylish and functional.

Upgrade your studio setup today and revolutionize the way you create music with the Ergonomic Studio Stand for Ableton Push 3. Experience comfort, visual clarity, and an improved working environment that will elevate your musical journey to new levels of excellence.

Notes: Your AKAI deserves to be in a comfortable position to enjoy it. That is why CoverUp have designed this stand so that in your studio, you have the best ergonomics and can make music without thinking about anything else.

Notes: Designed specifically for the Akai MPC Live, this stand offers a comfortable and ergonomic position for your equipment.

Crafted with two feet connected by 6mm rods to provide enhanced stability, ensuring your MPC Live stays securely in place.

Assembling the stand takes only seconds, and it weighs just a few grams, making it perfect for musicians who use their MPC Live for live performances.

To protect your MPC Live and prevent slippage, the stand includes silicone feet that prevent scratching and sliding.

Introducing the MPC Live Stand - the ultimate accessory for your Akai MPC Live. Elevate your performance and experience with this specially designed stand that combines comfort, stability, and convenience.

With its ingenious construction featuring two feet connected by sturdy 6mm rods, this stand guarantees rock-solid stability for your MPC Live. Say goodbye to wobbling or shifting during intense performances, allowing you to focus on creating music with confidence.

Setting up the stand is a breeze. In just a matter of seconds, you can assemble it effortlessly, thanks to its smart design. Plus, its lightweight construction ensures that you won't be burdened by unnecessary weight when on the go, making it an essential companion for live gigs and studio sessions.

It is important that you protect your precious MPC Live. That's why the stand includes high-quality silicone feet, meticulously designed to prevent any scratches or slips. Your MPC Live will stay in pristine condition, ready to perform at its best whenever you need it.

Choose the MPC Live Stand and take your music production to new heights. Elevate your setup, enhance your comfort, and unleash your creativity with this must-have accessory.

Weight: 0,5 kg
Dimensions: 10 × 10 × 10 cm

Notes: Your AKAI deserves to be in a comfortable position to enjoy it. That is why CoverUp have designed this stand so that in your studio, you have the best ergonomics and can make music without thinking about anything else.

Notes: The double stand is intended to house two Behringer synthesizers, with the ability to improve the operating position on both.

At the same time, it saves a lot of space on the surface, ideal for optimizing the space in our studios.

The stand includes rubber feet so it won’t scratch or slip.

It is compatible with Model D, K2, Pro 1, Neutron, Cat, Wasp

Notes: If you have Behringer TD3 machines in your studio, this is the ideal stand.

Designed and designed exclusively for the Behringer TD3, it may be more comfortable, more spacious and maintains your equipment 100% safe and stable.

All our supports, keep adherent feet 3m behind them so that the support does not loosen.

Notes: Bracket for mounting two DIGI machines

It allows it to be used in a comfortable and ergonomic position, which in turn saves space.

Specially designed with the need for space for wiring and connectors in mind.

On the support faces, each bracket has a recess to place silicone feet and prevent the equipment from slipping or scratching.

Notes: ELK (Elektron Leveling Kit) is a set of stands designed to match the height and angle of various generations and models of Elektron devices.

The MK2 series (RYTM and A4) features an incline, while other current models such as Digitakt, Digitone, Syntakt, and Analog Heat are flat. Additionally, we include previous generations such as Machinedrum, Monomachine, A4, RYTM, and Octatrack in this list.

With these stands, the fronts of the synthesizers are aligned at the same height and angle, creating a seamless continuation of the equipment placed beside them.

Compatible with Analog RYTM MK2 and Analog Four MK2 DIGI Stand.

Compatible with Digitakt, Digitone, Syntakt, Analog Heat (MK1 and MK2), Machinedrum, Monomachine, A4 MK1, RYTM MK1, and Octatrack (MK1 and MK2).

Each stand has rubber feet on its bottom to prevent slipping or scratching on the supporting surface.

Kit includes: X1 MK2 + X1 Digi elevate stand

Notes: Triple support for the entire Korg Volca line (Beats, Kick, Sample, FM, Keys, Bass, Drum, Modular, Mixer)

Save space in your studio and operate your synthesizers more comfortably.

The brackets fit directly into the Volca without the need for screws or moving parts. This makes them easy to transport and set up for those who go out and play with their Volca.

On the bottom, each foot has silicone legs to prevent them from scratching or slipping.

The pictures show red, but the colour is black.

For up to 3 Korg Volca devices
Made of biocompatible PLA plastic
Connection of the side parts by means of wooden rods
Dimensions (W x D x H): 196 x 246 x 271 mm

Suitable for:

Volca Beats
Volca Drum
Volca Bass
Volca Keys
Volca FM
Volca Kick
Volca Nubass
Volca Modular
Volca Sample
Volca Mix

Notes: This stand has the peculiarity that depending on the side that each foot is placed, 3 different work positions can be achieved.

Each foot adjusts to the equipment and allows it to be used in a much more comfortable and ergonomic position.

It is designed in such a way that all its forms are copied by the support and the fit is perfect.

In its lower part, each leg has a recess to place silicone legs and prevent the equipment from slipping.

Includes stand and silicone legs.

For up to three Make Noise desktop units
Suitable for 0-Coast, 0-Ctrl and Strega
Made of biocompatible PLA plastic
Connection of the side parts via wooden rods
Dimensions (WxHxD): 290 x 285 x 200 mm
Colour: Black

Notes: For two Make Noise desktop units

Suitable for 0-Coast, 0-Ctrl and Strega

Made of biocompatible PLA plastic

Connection of the side parts via wooden rods

Colour: Black

Notes: Moog is synonymous with synthesizers, and we have created a triple stand for three of their latest inventions. This triple stand is designed for the Mother32, DFAM, and Subharmonicon. You can assemble the parts as a triple stand, or you can use them separately as a double stand and an elevated single stand. While these synthesizers already have a slight incline, you will see how much more comfortable it is to use them together in a column and how much space you can save on your studio table. CoverUp studied the cabinets of each device to design a stand that fits perfectly and takes advantage of each shape to add strength and stability. Spce has been left to ensure the rear connectors don't collide with the stand. All of CoverUp's stands come with 3M rubber feet to prevent scratching or slipping.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Moog is synonymous with synthesizers, and we have created a triple stand for three of their latest inventions. This triple stand is designed for the Mother32, DFAM, and Subharmonicon. You can assemble the parts as a triple stand, or you can use them separately as a double stand and an elevated single stand. While these synthesizers already have a slight incline, you will see how much more comfortable it is to use them together in a column and how much space you can save on your studio table. CoverUp studied the cabinets of each device to design a stand that fits perfectly and takes advantage of each shape to add strength and stability. Spce has been left to ensure the rear connectors don't collide with the stand. All of CoverUp's stands come with 3M rubber feet to prevent scratching or slipping.

Notes: The ideal support for your three Boutique synthesizers.

To use them in a comfortable and ergonomic position, which in turn saves space.

Specially designed taking into account the need for space for wiring and rear connectors.

On the support faces, each support has a recess to place silicone feet and prevent the equipment from slipping or scratching.

Includes the two side supports, the rods and the silicone feet

Notes: Introducing the Roland Compact 3-Tier Modular Equipment Stand

Elevate your musical experience with the Roland Compact 3-Tier Modular Equipment Stand, a versatile solution designed to enhance your stage setup. Crafted with precision using cutting-edge 3D printing technology, this stand boasts a perfect blend of form and function, offering musicians a truly exceptional experience.

Key Features:

Modular Design: The Roland Compact stand features a smart, modular design, allowing you to use it either as a complete unit or as separate tiers. This adaptability ensures that your equipment setup is tailored precisely to your needs.

Eco-Friendly Materials: We're committed to sustainability! Our stand is created using eco-friendly materials, reducing its environmental impact. You can enjoy your music guilt-free, knowing that you're contributing to a greener world.

Lightweight and Portable: Musicians are always on the move, and we've got you covered. This stand is exceptionally lightweight, making it easy to transport from one gig to another. Say goodbye to the hassle of heavy gear!

Sturdy and Reliable: Despite its featherweight design, the Roland Compact stand is incredibly sturdy. You can trust it to hold your valuable equipment securely, providing you with the stability you need for a flawless performance.

Space-Efficient: With its three-tier configuration, this stand maximizes your available space. Organize your gear efficiently, so you can focus on making music without worrying about clutter.

Whether you're a solo artist, part of a band, or a live performer, the Roland Compact 3-Tier Modular Equipment Stand is the perfect choice for taking your performance to the next level. Its innovative design, sustainable production, and ease of transportation make it an invaluable addition to your musical arsenal.

Notes: ***B-STOCK: Box damaged with tears on packaging, but product is in excellent condition and in perfect working order***


Introducing the Roland Compact 3-Tier Modular Equipment Stand

Elevate your musical experience with the Roland Compact 3-Tier Modular Equipment Stand, a versatile solution designed to enhance your stage setup. Crafted with precision using cutting-edge 3D printing technology, this stand boasts a perfect blend of form and function, offering musicians a truly exceptional experience.

Key Features:

Modular Design: The Roland Compact stand features a smart, modular design, allowing you to use it either as a complete unit or as separate tiers. This adaptability ensures that your equipment setup is tailored precisely to your needs.

Eco-Friendly Materials: We're committed to sustainability! Our stand is created using eco-friendly materials, reducing its environmental impact. You can enjoy your music guilt-free, knowing that you're contributing to a greener world.

Lightweight and Portable: Musicians are always on the move, and we've got you covered. This stand is exceptionally lightweight, making it easy to transport from one gig to another. Say goodbye to the hassle of heavy gear!

Sturdy and Reliable: Despite its featherweight design, the Roland Compact stand is incredibly sturdy. You can trust it to hold your valuable equipment securely, providing you with the stability you need for a flawless performance.

Space-Efficient: With its three-tier configuration, this stand maximizes your available space. Organize your gear efficiently, so you can focus on making music without worrying about clutter.

Whether you're a solo artist, part of a band, or a live performer, the Roland Compact 3-Tier Modular Equipment Stand is the perfect choice for taking your performance to the next level. Its innovative design, sustainable production, and ease of transportation make it an invaluable addition to your musical arsenal.

Notes: Protective cover and inclined stand. All in one piece. On one side, it's a cover that protects the OP-1, shielding keys, screen, and knobs. But leaving the side connectors uncovered, so you don't have to unplug it to cover it.

It also provides the option to use it as an inclined stand for the OP-1, simply by reversing its position. Fitting snugly around the perimeter of the synthesizer.

The cover is decorated to resemble the recording view of the OP-1.

***The OP-1 is not included, it is shown in the photos for demonstration purposes only. ***

Notes: The Osmose from Expressive E, with its groundbreaking approach to musical expression, has rapidly become a highly sought-after item in the Decksaver cover range. As a tool that redefines the interaction between musician and instrument, it's imperative to ensure that such a distinctive piece of equipment is afforded the highest level of protection. The Decksaver protective lid, crafted from robust and durable polycarbonate, is meticulously designed to shield your Osmose from dust, liquid spills, and accidental knocks or impacts.

Tailored exclusively for the Expressive E Osmose, this Decksaver cover is precision-engineered to guarantee a flawless fit, accommodating the Osmose's unique shape and cable connections. This careful design means the cover effortlessly fits into any carry case, offering hassle-free transport and dependable protection.

Whether you're transporting your Osmose to a studio session, a live gig, or simply keeping it safe at home, this cover ensures that its delicate keys and complex components are thoroughly protected from potential damage when not in use.

The demand for the Decksaver cover for the Expressive E Osmose speaks volumes about its necessity for its owners. It represents not merely a protective measure but an essential investment in maintaining the innovative capabilities and immaculate condition of your keyboard.

Dimensions

Weight: 1.025 kg
Length: 90.2 cm
Width: 31.7 cm
Height: 5.2 cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: The Midas M32R, celebrated for its superior audio quality and comprehensive control features, has established itself as a crucial element in both live sound and studio settings. In acknowledgement of its vital role in audio production and owing to the high demand for effective protection, Decksaver are pleased to present the cover for the Midas M32R.

Crafted from robust, high-grade polycarbonate, this cover is specifically designed to protect your M32R from dust, liquid spills, and accidental impacts, ensuring that your mixer remains in optimal condition.

This Decksaver cover is precision-engineered to snugly fit the Midas M32R, offering a precise, form-fitting shield over all the mixer's knobs, faders, and controls, whilst conveniently allowing for cable connections. This thoughtful design is the result of an in-depth understanding of the needs of audio professionals, facilitating ease of use for those requiring quick, efficient setup and breakdown.

Ideal for use in the demanding environments of live sound, busy recording studios, or for protective storage, this cover acts as a reliable barrier, preserving both the functionality and the aesthetic appeal of your M32R.

Opting for the Decksaver cover for your M32R is more than just a precautionary measure; it signifies a commitment to preserving the longevity and performance of an integral piece of your audio equipment. Highly regarded by industry professionals and sought after by audio enthusiasts, this cover is an indispensable accessory for anyone committed to maintaining their Midas M32R in prime condition, ready for any audio challenge or creative endeavour.

Dimensions

Weight: 1.04 kg
Length: 48.5 cm
Width: 63.5 cm
Height: 1.6 cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: The tools we use to compose and produce music are dear to our hearts. Dust, liquid and accidental impact have taken many a good unit down over the years - this is where Decksaver steps in. Precision trimmed for perfect fit, the Moog Subsequent 37 Cover can sit ready for operation. This case slides straight into a flight or soft case for maximum protection during transportation, and it also shields delicate controls and internal components from damage at home, on the road and onstage.

Notes: Engineered specifically for the Native Instruments Kontrol S49 MK2 Keyboard Controller. Custom moulded to fit the contours of the S49 MK2 whilst leaving USB connections in place, the Kontrol S49 MK2 can sit ready for operation. Super durable polycarbonate shell protects delicate keys during transportation and slides straight into a flight case or controller bag for maximum protection. Don't go losing your keys.

Notes: Devices like the Native Instruments S49 MK3 keyboard controller are pivotal to your music production collection, acting as the cornerstone of your creative ensemble. Such indispensable equipment necessitates the utmost level of protection. This Decksaver cover, constructed from an ultra-durable polycarbonate shell, is meticulously designed to guard your S49 MK3 against dust, liquid spillages, and unintended impacts.

Precision-crafted to embrace the Native Instruments S49 MK3 snugly, each Decksaver cover accommodates connected cables, ensuring a perfect fit. This thoughtful aspect of the design facilitates smooth transition into a flight case or controller bag, establishing it as the perfect mate for transit. Whether you're travelling, operating in your home studio, or preparing in a club, this cover ensures that your S49 MK3's sensitive controls and internal components are shielded from potential harm.

In essence, this cover for the S49 MK3 transcends mere protective gear; it represents an investment in the sustained quality and dependability of your esteemed keyboard controller.

Dimensions

Weight: 1.039 kg
Length: 81 cm
Width: 33.1 cm
Height: 5.7 cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.