Studio Monitor Amplifiers

Notes: Studio Digital Amplifier

The extremely efficient Class-D topography used in the ART SDA1 Studio Digital Amplifier delivers 200 watts per channel (at 4 ohms) in a compact, single rack space chassis. Taking advantage of the full potential of digital amplifier design, the SDA1 doesn't require noisy, dust collecting cooling fans in operation, making it the ideal solution for studio control rooms and installations.

The flat 20Hz to 20kHz frequency response makes the SDA1 the perfect choice for critical listening in studio environments. Balanced inputs and versatile multi-way binding post outputs ensure quick connectivity to any source and speaker combinations, including 70v commercial installation systems.

A solid steel and aluminum chassis design ensures maximum reliability. Recessed 'pop-up' detented attenuator knobs deter uninvited users adjusting volume settings in install applications.

Notes: The SLA-1 Studio Linear Amplifier is a robust yet compact power amplifier designed for studio or even select live applications. It has been designed and engineered to provide clean, quiet power and excellent sound with ultra-low noise and distortion.

Rated at 100 watts rms/channel @ 8 ohms (130 watts rms/channel @ 4ohms), with a frequency response from 10 Hz to 40 kHz the SLA-1 is perfect for professional, project and home studios. Capable of delivering 260 Watts when bridged mono into an 8 ohm load, the SLA-1 can easily move out of the studio and into any live rig or installation as an ideal monitor amplifier or zone amp solution.

The SLA-1 has been designed to deliver in the most demanding audio applications. Housed in an aluminum and steel single space 19-inch rackmount chassis, the SLA-1 uses a proven toroidal transformer design for unmatched long-term reliability.

The SLA-1 features SmartFan, an advanced, thermal dependent fan assisted convection cooled system. The SmartFan system is dependent upon the internal ambient temperature of the unit, and runs at high or low levels depending on the amplifier's cooling needs.

XLR and 1/4-inch TRS balanced inputs as well as multi-way output binding posts are ensure the SLA-1 can be quickly and easily tied in to any system without modification. A simple to install tamper proof cover is included.

Notes: The Reference Amplifier A800 is the ideal choice for home and professional recording studios, post-production suites, or anyone seeking audiophile-grade performance - without the audiophile-grade price tag! A professional 800-Watt ultra-linear power amplifier, the A800 provides stunningly-accurate audio reproduction - without the slightest hint of distortion or artificial coloration common to many competing products. Thanks to its ingenious servo-controlled design, and the high-level components used throughout, the A800 boasts remarkable specs and unrivaled sonic performance.

Professional audio engineers the world over are impressed by the A800's performance and surprised by its affordability. Capable of delivering 2 x 400 Watts (4 Ohms) and 800 Watts 8 Ohms in bridged-mono mode, the A800 exhibits massive headroom for the utmost in pristine audio reproduction. The A800's advanced convection-cooling technology ensures stable, noise-free operation - while the servo-controlled design allows it drive virtually any passive speaker system.

A precise level meter with input clip and channel protection LEDs are provided for accurate performance monitoring. Input connections are provided in the form of balanced XLR and 1/4" TRS connectors, as well as unbalanced RCA sockets, ensuring you have loads of input options. Plus, the speaker outputs give you the choice between professional twist-lock and binding post connectors.

Thanks to High-Density Class-D amplifier Technology, the Reference Amplifier A800 gives you enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency - and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremely-powerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment.

The new SmartSense Technology puts the punch back into Class-D amplification, providing vastly improved full-range frequency response with more powerfully-dynamic bass, and smoother high-frequency reproduction. The resulting output is no longer dependent on the actual load, but is rendered perfectly ruler flat via impedance compensation. A800's design also incorporates a significantly-higher damping factor that yields better amplifier control over the loudspeaker for stronger audio reproduction - especially in the LF area.

Notes: The EP2000 has become one of the best-selling power amps in the industry. Our proprietary Accelerated Transient Response (ATR) Technology gives the EP2000 the massive power reserves needed for deep and impactful bass response, which translates into a more natural sound quality that will bring your audience to its feet - and keep them there! With an amazing 2,000-Watts of output power (2 x 1,000 Watts @ 2 Ohms; 2 x 750 Watts @ 4 Ohms; 2,000 Watts @ 4 Ohms in Bridge mode), the EP2000 is the perfect amplifier for medium- sized club gigs, mobile PA systems, church services or public spaces.

The uber-simple front panel controls of the EP2000 provides all of your amp's vital signs at a glance. After flipping the Main switch, the Power LED will light when the amp is ready for action. Each of the 2 channels feature dedicated Gain controls and Signal LEDs, that light up when a signal is present at the input, as well as Clip LEDs to indicate when input adjustments are required.

It takes huge pulses of energy (current and voltage) to propel a woofer cone fast enough to match a bass beat. That's called ATR or Accelerated Transient Response and it's the holy grail of amp designers. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of our circuitry, our amps react instantly to even the most demanding bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.

The rear panel of every EUROPOWER EP2000 sports an array of options to help you get the most out of your amp. The built-in Clip Limiter automatically senses when the amplifier is being driven into "clipping" and momentarily reduces the input level to avoid distortion. This all happens in mere micro-seconds, making it the ideal way to ensure perfect sound all the time.

Stage vibrations, mic thumps and wind noise can cause ultra-low frequency sounds, or infrasonics - and while technically inaudible, they can be a real drain on power resources. As a solution, the EP4000 features a defeatable Low Cut Filter that eliminates frequencies below either 50 or 30 Hz (depending on your PA system's capabilities) - for better sonic performance, as well as the ultimate in loudspeaker protection. The rear panel also contains the Stereo or Bridge (mono) mode switches.

There are lots of awesome features on the outside of the EP2000, but this amplifier's beauty goes much more than just skin-deep. Inside you'll find industry-leading components, such as world-class Toshiba/Fairchild power transistors, and a custom-designed, high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects both the amplifier and your speakers. The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps the comfortably EP2000 within its normal operating range. Finally, an impact-resistant, all-steel 2U rack-mount chassis protects your investment from the rigors of the road.

There are lots of awesome features on the outside of the EP2000, but this amplifier's beauty goes much more than just skin-deep. Inside you'll find industry-leading components, such as world-class Toshiba/Fairchild power transistors, and a custom-designed, high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects both the amplifier and your speakers. The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps the comfortably EP2000 within its normal operating range. Finally, an impact-resistant, all-steel 2U rack-mount chassis protects your investment from the rigors of the road.

Notes: The EP4000 builds on the incredible legacy of our EP2500, which is one of the best-selling power amps in the industry. Our proprietary Accelerated Transient Response (ATR) Technology gives the EP4000 the massive power reserves needed for deep and impactful bass response, which translates into a more natural sound quality that will bring your audience to its feet - and keep them there! With an amazing 4,000-Watts of output power (2 x 2,000 Watts @ 2 Ohms; 2 x 1,400 Watts @ 4 Ohms; 4,000 Watts @ 4 Ohms in Bridge mode), the EP4000 is the perfect amplifier for medium-sized club gigs, mobile PA systems, church services or public spaces.

The uber-simple front panel controls of these amps give you all of your sound's vital signs at a glance. After flipping the Main switch, the Power LED will light when the amp is ready for action. Both channels have independent gain dials as well as Clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also Signal LEDs that light up when a signal is present at the input.

It takes huge pulses of energy (current and voltage) to propel a woofer cone fast enough to match a bass beat. That's called Transient Response and it's the holy grail of amp designers. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of our circuitry, the EP4000 reacts instantly to even the most demanding bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.

The rear panel of every EUROPOWER EP4000 sports an array of options to help you get the most out of your amp. The built-in Clip Limiter automatically senses when the amplifier is being driven into "clipping" and momentarily reduces the input level to avoid distortion. This all happens in mere micro-seconds, making it the ideal way to ensure perfect sound all the time.

Stage vibrations, mic thumps and wind noise can cause ultra-low frequency sounds, or infrasonics - and while technically inaudible, they can be a real drain on power resources. As a solution, the EP4000 features a defeatable Low Cut Filter that eliminates frequencies below either 50 or 30 Hz (depending on your PA system's capabilities) - for better sonic performance, as well as the ultimate in loudspeaker protection. The rear panel also contains the Stereo or Bridge (mono) mode switches.

There are lots of awesome features on the outside of the EP4000, but this amplifier's beauty goes much more than just skin-deep. Inside you'll find industry-leading components, such as world-class Toshiba/Fairchild power transistors, and a custom-designed, high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects both the amplifier and your speakers. The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps the comfortably EP4000 within its normal operating range. Finally, an impact-resistant, all-steel 2U rack-mount chassis protects your investment from the rigors of the road.