Studio monitors

Notes: Unique studio monitors from AIAIAI, featuring built-in battery power and high-resolution, low-latency Wireless+ streaming for fully wireless use in any setting. Compact, versatile and powerful.

Supplier's Notes:
Wireless and portable studio monitors with powerful performance and accurate sound representation. Connect wirelessly for a clutter-free setup and bring your creative process anywhere.

Experience unparalleled flexibility and truly liberating mobility in your creative process as a music producer. These studio monitors allow you to create and mix music with accurate sound representation and powerful performance wherever you are. Connect wirelessly to your devices and enjoy crystal clear audio without the hassle of cables. Take control of your creativity and elevate your music to the next level with these wireless portable studio monitors.

Complete wireless freedom

Battery powered with 20H+ of playback time
W+ Link ultra low latency wireless audio for music creation - only 16ms of latency, uncompressed audio and robust connection
Complete wireless freedom - both audio and power cables

Reference monitor sound

2 way active monitor featuring a 4 inch high-excursion woofer and 1 inch silk-dome tweeter
Precision tonal accuracy over a flat +/-2dB frequency response from 50Hz to 20kHz
Bass vent and boosting EQ tuned to provide a clean bass extension down to 40Hz
Precise soundstage and point-source accuracy provided by the minimal front panel design,
incorporating a directivity controlling tweeter waveguide
Stage monitor design enables you to place the speaker upright or angled horizontally, to
optimise your sound field in changing workspaces
Shape UNIT-4's sound to your environment or preference using the AIAIAI app customisable
5-band EQ

Portable, compact and rugged

Size and weight of only 3 litres / 2.5kg
Rear bass vent designed to be a comfortable carrying handle when on the move
Removable steel grille provides sturdy protection for the woofer and tweeter

Connect to everything

W+ Link - use the X02 transmitter for low latency wireless music creation
Bluetooth 5.2 - listen to music from your Bluetooth enabled devices
Cable - connect directly via 3.5mm mini-jack and 6.3mm balanced TRS inputs

Responsible design

Main components produced from 100% recycled plastics, from post-consumer sources
Designed for disassembly and engineered from the inside out
Mechanically assembled in a glue-free design
Take the whole speaker apart using two screwdrivers
Replaceable components including battery and drive units
Future-proofed for new technologies with upgradable wireless electronics

In the box:

UNIT-4 Wireless+ 2pcs

Portable and ultra-low latency wireless studio monitors. Includes protective steel grills and power supplies with regional cord.

X02 Transmitter - 1pcs

USB-C W+ Link transmitter. Transmits to 2 x W+ Link devices simultaneously. Includes a 0,2m USB-C to USB-C cable in neon.

Protective pouch 2pcs

UNIT-4 protective pouch in black. Made from compostable fabric material.

Tech Specs

Freq. range: 40Hz to 40kHz (-10dB)
Freq. response: 50Hz to 20kHz (+/-2dB)
Peak SPL: 105 dBSPL
Woofer: 4-inch high excursion paper cone woofer
Tweeter: 1-inch silk dome tweeter
Amplifier power: 2 x 30W continuous, 2 x 80W peak
W+ Link latency: 16 ms
Bluetooth version: 5.2
Analogue inputs: 3.5mm mini-jack + 6.3mm TRS balanced
Playback time on battery: 20 hours
Charging time: 2 hours
Battery capacity: 77 Wh

Notes: Dark grey version of the 8030C, part of Genelec's iconic range of compact monitors. Max SPL of 104 dB and frequency response of 47 Hz - 25 kHz mean that the 8030Cs pack a bigger punch than their 30 x 19 cm dimensions would suggest.

Supplier's Notes:
If you love the compact format of the 8010 and 8020 models but demand higher SPL and more bass extension, meet the 8030C.

Welcome to the sweet spot

Short term max SPL: >104 dB

Maximum short term sine wave acoustic output on axis in half space, averaged from 100 Hz to 3 kHz at 1 m.

Long term max SPL: >96 dB

Maximum long term RMS acoustic output in same conditions with IEC weighted noise (limited by driver unit protection circuit) at 1 m.

Self-generated noise: <5 dB SPL

Self generated noise level in free field at 1 m on axis (A-weighted).

Weight: 5 kg (11.0 lb)

Dimensions

Height: 285 mm (11 1/4 in)
Height with Iso-Pod: 299 mm (11 3/4 in)
Width: 189 mm (7 1/2 in)
Depth: 178 mm (7 in)

Enclosure

Enclosure material: Die cast aluminium
Enclosure type: Reflex port

Drivers

Bass

Driver type: Cone
Diameter: 130 mm (5 1/8 in)

Treble

Driver type: Metal dome
Diameter: 19 mm (3/4 in)
Harmonic distortion

50-100 Hz <2 %
> 100 Hz <0.5 %

Amplifiers

8030C bass amplifier: 50 W Class D
8030C treble amplifier: 50 W Class D

Mains voltage: 100-240 VAC 50/60Hz

Power consumption

ISS Active: <0.5 W
Idle@ <3 W
Full output: 60 W

Signal processing section

Connectors

Input: Analogue signal input connector XLR female, balanced 10 kOhm.

Crossover

Bass/Treble: 3000 Hz

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order. Without Original Box***


Linear frequency response. Zero coloration. Transparency. Headroom. To hear the truth, you need reference speakers that offer up. Your studio monitors deliver, but what about when you're on the go? What if there was a reference monitor that could free you from the confines of the studio walls and provide you the truth in your music no matter where you are - mixing in a small makeshift recording space, mastering in a hotel room, working in your own studio, or composing on the go? Wouldn't that be sweet?

Now, with iLoud Micro Monitor, you can hear the truth in your music anytime and everywhere. The smallest active studio reference monitoring system in the world, iLoud Micro Monitor provides you with ultra-accurate true linear frequency response with no coloration of sound, and can do so in every listening environment. Sound too good to be true? Read on...

iLoud Micro Monitors are two extremely portable, high-performance bi-amped speakers that deliver a combined 50W RMS of power for superior bass, plenty of headroom and an expansive stereo image. Whether you're recording, editing, mixing, or mastering audio, iLoud Micro Monitor ensures your mix will translate well to the huge variety of consumer devices - headphones, home stereo systems, gaming consoles, car audio systems, TVs, and other listening systems.

With iLoud Micro Monitor, you will hear the truth in your music no matter whether you're mixing, mastering or just listening to your favourite tunes at home. And best of all, it offers its portability, power and flexibility at a price that's affordable for everyone.

A legacy of power:
When the original iLoud Bluetooth speaker was released, it set a new standard for portable power and sonic accuracy. iLoud Micro Monitor is a natural evolution of that design, and just like its highly popular predecessor, it offers a completely new and unmatched portable sonic experience.

Its two speakers are powered by ultra-efficient class D power amplifiers that push a combined 50 W RMS of power. Each speaker sports a 3/4" silk dome tweeter, a 3" paper-cone performance woofer and a large-flaring front-firing bass reflex port. Thanks to these features, it's able to deliver pleasing high frequencies, an exceptionally "open" midrange and a solid and controlled low end. Simply put, iLoud Micro Monitor's sound is so good that it's nearly inconceivable for a speaker system of this size and at this price point.

Sonically Transparent Monitoring System:
iLoud Micro Monitor sounds amazing and real. But why? Well, a part of that is due to its internal 56-bit digital signal processor (DSP). This DSP is responsible for things like taking care of the frequency and phase response of the monitor as well as also controlling the dynamic range so that the drivers are always controlled. It also acts as a digital crossover that allows for invisibly smooth transitions between the drivers themselves.

Adjustable audio:
You're bound to come across all sorts of listening environments when you're on the go. Most speakers can't handle this kind of variety, but iLoud Micro Monitor can. Its internal DSP is controllable thanks to three dedicated EQ switches. You get switches for bass and treble as well as a "DESKTOP" compensation switch - this lets you switch between a "free field" and "desktop" setup effortlessly.

You can also position iLoud Micro Monitor at two angles of inclination, so you can optimize your listening experience to suit the characteristics of the room you're working in.

Get connected:
You can easily use iLoud Micro Monitor with all your favourite gear. Sending an audio signal to it couldn't be easier. It has inputs for both RCA and 1/8" connectors, and it can also be paired via Bluetooth to any Bluetooth-enabled device. With all of its inputs, you'll always be able to use its ultra-linear sound to monitor your music no matter where you are or what device you're using.

The perfect laptop monitoring companion:
Reference monitor sound anytime and everywhere - iLoud Micro Monitor makes it possible. Its two speakers make for one incredibly small and portable system that delivers exceptional sound in any environment. Their compact size make for the perfect monitoring system to use while traveling with your laptop. They easily pack up into a gig bag or backpack so you can use their phenomenal sound anywhere.

***NOW INCLUDES FREE T-RACKS METERING SUITE UPON REGISTRATION WITH IK MULTIMEDIA***

Notes: ***B-STOCK: Box damaged but product is in excellent condition and in perfect working order***


Updated version of IK's impressive iLoud monitors featuring real-time DSP correction to compensate for the acoustics of your lab.

IK's iLoud Micro Monitors stunned an industry. Producers and engineers at every level marvelled at the performance coming from such a small setup, so IK challenged our team to push its concept even further - to design a new compact speaker to rival 5", 6" and even 8" monitors.

The result is iLoud MTM, and it changes everything about the sound, accuracy and convenience of reference monitors in today's modern studio.

Once you hear iLoud MTM, you'll find it hard to ever go back to traditional big-box speakers.
Reference-class, ultra-linear response:

The first job of any studio monitor is to deliver accurate, un-coloured sound so you can trust your mixing decisions will translate across multiple playback systems. iLoud MTM uses the most advanced DSP techniques to provide total control over the speakers' performance, delivering results simply not obtainable with traditional analogue designs.

Highs are neutral and defined, mids are clear and balanced, and lows are as balanced as ever. You can mix for hours with no ear fatigue, and the work you create will translate better than ever. And of course, it's loud, with 100W RMS total power per speaker and 103dB SPL maximum sound pressure, delivering the proven volume the iLoud brand is known for.

Extended low-end to rival larger systems:

iLoud Micro Monitor wowed the world with the bass performance it delivered from a 3" speaker that "defied physics". But iLoud MTM offers even more, with even bass response down to an astonishing 40Hz ideal for modern music styles.

iLoud MTM debuts IK's new patent-pending Physical Response Linearization (PRL) system, that uses a precise model of the enclosure's design, construction and materials, combined with electro-mechanical measurements of the real units, to correct the system's performance in real time. The result is a stunningly "firm," balanced and defined low end, to surpass the sound of speakers even twice iLoud MTM's size.

Deep bass is solid and firm - you won't believe sound like this comes from a monitor so small.

A new phase in accurate sound reproduction:

Most conventional studio monitors, even high-end designs, suffer from skewed phase response caused by traditional, phase-shifting crossovers and driver/enclosure phase alterations. The end result is an unfocused stereo image, blurry transients, and overall lack of detail. iLoud MTM leverages IK's two decades of DSP experience to offer a true phase-coherent response across the useful frequency spectrum, for unbelievably realistic, natural sound like you've never heard.

You'll hear instruments and dialogue as if it's happening live, discover more detail in your tracks than ever before, and stop wasting hours trying to EQ away issues with your mixes that were never really there. This linear-phase response is rarely found in speakers even several times iLoud MTM's price, and has to be heard to be appreciated.

Symmetrical MTM design for superior imaging and precision:

iLoud MTM uses a midrange-tweeter-midrange symmetrical design, with a pair of 3.5" high performance woofers and one 1" high definition, back-chamber loaded tweeter, which provides ultra precise, defined, point source sound that can't be achieved by traditional 2-way systems at close distances. This means an even more natural, life-like sound, where the speakers "disappear" and you can focus on the music. It also minimizes the ear fatigue caused by traditional 2- or 3-way designs, where different frequencies arrive at your ear at different times. So you can mix longer, with less effort.

iLoud MTM's design also offers exceptional sound dispersion, enhancing the transparency and neutrality of what you hear.

Instantly adjust to any room environment:

Today's studios can be anywhere, from acoustician-designed spaces to a spare bedroom. Too many speaker manufacturers keep designing for ideal acoustic environments, ideal positioning and large listening distances. But many musicians simply don't have that luxury.

iLoud MTM offers built-in acoustic self-calibration via the included ARC reference microphone, to automatically adjust the frequency response to its placement. Just set up the monitors, put the microphone in your preferred listening position, press a button and you'll instantly have a custom calibration for the sweet spot of your listening environment.

Digitally-controlled for precision audio:

iLoud MTM uses audiophile-grade high resolution algorithms and the top-of-the line A/D converters to carefully manage cross-overs, filtering, time alignment, equalization, dynamics control and auto-calibration. Totally DSP-controlled and precision time-aligned, iLoud MTM also manages the off-axis response to manage the effects of room reverberations.

***NOW INCLUDES FREE T-RACKS METERING SUITE UPON REGISTRATION WITH IK MULTIMEDIA***

Notes: Studio monitors re-invented. Again.

iLoud Precision series represents another breakthrough in nearfield monitoring from the company that revolutionized compact monitors with iLoud Micro Monitor and iLoud MTM.

Available in a choice of 3 configurations - 2-way 5" or 6.5", and 2 x 5" MTM - these handmade works of sonic art reflect IK's 25+ years of expertise in loudspeaker design and digital signal processing, delivering a level of sonic detail that beats speakers at three times the price, with unique DSP-based features and software workflow enhancements that can't be found anywhere else.

Best-in-class frequency response

Creating mixes that translate perfectly to the outside world, iLoud Precision offers best-in-class frequency response with an extended range of 36 Hz - 30 kHz and a stunning +/- 1 dB accuracy ultra-flat response from 45 Hz to 30 kHz, for precise and uncolored audio throughout the entire listening range.

True linear phase response for unmatched clarity and translation

iLoud Precision leverages its advanced 96 kHz internal DSP system, digital crossover and custom-designed audiophile amplifiers to deliver true linear phase response above 150 Hz (and the very minimum possible phase rotation at low frequencies) for precise stereo imaging, sharp transients, incredibly solid bass and breathtaking detail. The result is a stunningly clear, transparent and revealing sound quality that's absolutely true to life.

Perfect time alignment that eliminates ear fatigue

iLoud Precision also sets a new standard for time coherence, or the precise timing alignment between all the portions of the audio spectrum. Reaching nearly the theoretical ideal performance, iLoud Precision offers the highest level of time accuracy, without sacrificing frequency response. Precise time alignment offers incredibly transient response and frequency balance and eliminates the ear fatigue that can develop over longer listening sessions on lesser monitors. Plus this improves the "readability" of the program and therefore translation.

Built-in acoustic calibration to hear your music and not your room

With iLoud Precision there's less worry about treating your room. Each speaker features built-in calibration based on the acclaimed ARC™ System technology. Just connect the included MEMS measurement microphone and in a few seconds, the iLoud Precisions will tune themselves to any environment from your mixing room to living room

Deep, controlled bass with or without a sub

With bass extension down to 36 Hz at only - 4 dB, iLoud Precision delivers deep, powerful bass that's nevertheless controlled and balanced, with minimum phase rotations. With ARC enabled, in many rooms iLoud Precision can reach as low as 30 Hz, while an adjustable bass roll-off lets Precisions integrate with a sub, for unparalleled low-end performance in any setup, without the need of an external crossover that could degrade sonic performance.

MTM configuration for point source sound

At the top of the range, the iLoud Precision MTM use the midwoofer-tweeter-midwoofer configuration to deliver not only the highest SPL, but also an ultra-precise, point source sound and an incredible stereo field. This means an even more natural, life-like sound, where the speaker cabinets "disappear" and attention can be focused entirely on the music.

Ideal for immersive setups

In addition to self-calibrating to the listening environment, iLoud Precision includes a range of low- and high-frequency management options, including a switchable Full/35/50/65/80 Hz extension to optimize their performance with Atmosr and other immersive setups.

Powerful software control

Extended calibration and custom voicing

The iLoud Precision series introduces X-MONITOR, a newly developed advanced control application for Mac and Windows that assists with ARC calibration and enables extended acoustic and voicing selection and adjustments to fine-tune iLoud Precision to your taste, plus convenient remote access to the settings on the Precision's back panel. The software is plug-n-play via a simple USB connection with no special setup needed.

Iconic studio monitors and popular speaker emulations

Even more exciting, X-MONITOR emulates the frequency and phase response of the most famous studio monitors on the market, as well as popular hi-fi speakers and mobile devices, for a breathtakingly true-to-life experience. Over 20 studio monitor profiles are included, and more will be released in the future, saving you money and space. A single pair of iLoud Precisions with X-MONITOR lets you test a mix on different reference systems quickly, without ever leaving the sweet spot or needing any other speakers.

Fully accessorized
Measurement microphone included

Each iLoud Precision includes a high precision MEMS measurement microphone for the built-in ARC calibration that makes setting up the monitors a breeze.

Isolation pods included

Designed to meet the specific needs of audio professionals and musicians, each iLoud Precision includes a kit of 4 iLoud Isolation Pods. Enjoy enhanced audio clarity, consistency and imaging precision throughout the whole frequency spectrum as these custom pods dramatically reduce the propagation of vibrations between the speaker and supporting surface.

Optional remote control

The optional iLoud Precision Remote Control lets you switch easily between 4 X-MONITOR speaker emulations or custom voicings and assign functions like ARC On/Off, Mute or Dim. And for use with ARC room correction software, the remote can control the measurement/room calibration process from the desk while providing visual feedback on the process status.

Specs

5" ultralight coated paper mid-woofer
1.5" high output, low distortion chambered textile dome tweeter
Audiophile, custom-designed Class-D power amplifiers
135 W total RMS power
Max SPL, peak, pair, music, 1 m: 114.5 dBA
Complete DSP controlled system, 96 kHz sampling rate
46 Hz to 30 kHz frequency response +/- 1 dB
39 Hz low frequency extension @-4 dB
Phase response: Coherent, 0/+20- max from 150 Hz up
Phase rotation at 100Hz (with high pass filter off): 50- max
Directivity (Vertical - all voices): +/-50-
Directivity (Vertical - Wide Dispersion mode): +70-/-50-
Continuous, long term SPL free field, 1 m distance, one speaker, fullband pink noise: 98.5 dB(A)
Peak SPL free field, 1 m distance, one speaker, fullband pink noise: 104.5 dB(A)
Peak SPL, half space, 1 m distance, one speaker, fullband pink noise: 106.5 dB(A)
Maximum peak SPL, per pair, 1 m distance, music program: 114.5 dB(A)
Crossover frequency: 2.1 kHz
Crossover type: 8th order, linear phase
LF Power amp (short term): 110 W
HF Power amp (short term): 25 W
Power amps distortion at nominal power: 0.005%
Total latency or TOF: 2.5 ms
Adjustable additional delay: 0-10 ms
High pass filter: off, 35, 50, 65, 80 Hz
LF contour: from -10 to +6 dB
Desk contour: from -10 to 0 dB
Mid contour: from -4 to +4 dB
HF contour: from -6 to +6 dB
Sentitivity: -4 dBu / 88 dBSPL
Input gain trim: +/-5 dB
Unit to unit consistency: +/-0.5 dB
Operating temperature (non condensing): from 0 to 35 -C
Coherent time response across the audio spectrum
High performance vented design
Built-in ARC room calibration
X-MONITOR technology
Remote control for X-MONITOR voice selection and measurement process control
X-MONITOR macOS and Windows control software
Handcrafted in Italy

Dimension and weight
(H x W x D): 296 mm/11.65" x 177 mm/6.96" x 223 mm/9.17"
6.1 kg/13.4 lbs.

Package includes:

1 x iLoud Precision 5 monitor
Power cord
ARC Microphone
ARC Microphone clamp
USB-B to USB-A 2.5 m/8.2 ft. cable
1 x kit of 4 iLoud Isolation Pods

Notes: Studio monitors re-invented. Again.

iLoud Precision series represents another breakthrough in nearfield monitoring from the company that revolutionized compact monitors with iLoud Micro Monitor and iLoud MTM.

Available in a choice of 3 configurations - 2-way 5" or 6.5", and 2 x 5" MTM - these handmade works of sonic art reflect IK's 25+ years of expertise in loudspeaker design and digital signal processing, delivering a level of sonic detail that beats speakers at three times the price, with unique DSP-based features and software workflow enhancements that can't be found anywhere else.

Best-in-class frequency response

Creating mixes that translate perfectly to the outside world, iLoud Precision offers best-in-class frequency response with an extended range of 36 Hz - 30 kHz and a stunning +/- 1 dB accuracy ultra-flat response from 45 Hz to 30 kHz, for precise and uncolored audio throughout the entire listening range.

True linear phase response for unmatched clarity and translation

iLoud Precision leverages its advanced 96 kHz internal DSP system, digital crossover and custom-designed audiophile amplifiers to deliver true linear phase response above 150 Hz (and the very minimum possible phase rotation at low frequencies) for precise stereo imaging, sharp transients, incredibly solid bass and breathtaking detail. The result is a stunningly clear, transparent and revealing sound quality that's absolutely true to life.

Perfect time alignment that eliminates ear fatigue

iLoud Precision also sets a new standard for time coherence, or the precise timing alignment between all the portions of the audio spectrum. Reaching nearly the theoretical ideal performance, iLoud Precision offers the highest level of time accuracy, without sacrificing frequency response. Precise time alignment offers incredibly transient response and frequency balance and eliminates the ear fatigue that can develop over longer listening sessions on lesser monitors. Plus this improves the "readability" of the program and therefore translation.

Built-in acoustic calibration to hear your music and not your room

With iLoud Precision there's less worry about treating your room. Each speaker features built-in calibration based on the acclaimed ARC™ System technology. Just connect the included MEMS measurement microphone and in a few seconds, the iLoud Precisions will tune themselves to any environment from your mixing room to living room

Deep, controlled bass with or without a sub

With bass extension down to 36 Hz at only - 4 dB, iLoud Precision delivers deep, powerful bass that's nevertheless controlled and balanced, with minimum phase rotations. With ARC enabled, in many rooms iLoud Precision can reach as low as 30 Hz, while an adjustable bass roll-off lets Precisions integrate with a sub, for unparalleled low-end performance in any setup, without the need of an external crossover that could degrade sonic performance.

MTM configuration for point source sound

At the top of the range, the iLoud Precision MTM use the midwoofer-tweeter-midwoofer configuration to deliver not only the highest SPL, but also an ultra-precise, point source sound and an incredible stereo field. This means an even more natural, life-like sound, where the speaker cabinets "disappear" and attention can be focused entirely on the music.

Ideal for immersive setups

In addition to self-calibrating to the listening environment, iLoud Precision includes a range of low- and high-frequency management options, including a switchable Full/35/50/65/80 Hz extension to optimize their performance with Atmosr and other immersive setups.

Powerful software control

Extended calibration and custom voicing

The iLoud Precision series introduces X-MONITOR, a newly developed advanced control application for Mac and Windows that assists with ARC calibration and enables extended acoustic and voicing selection and adjustments to fine-tune iLoud Precision to your taste, plus convenient remote access to the settings on the Precision's back panel. The software is plug-n-play via a simple USB connection with no special setup needed.

Iconic studio monitors and popular speaker emulations

Even more exciting, X-MONITOR emulates the frequency and phase response of the most famous studio monitors on the market, as well as popular hi-fi speakers and mobile devices, for a breathtakingly true-to-life experience. Over 20 studio monitor profiles are included, and more will be released in the future, saving you money and space. A single pair of iLoud Precisions with X-MONITOR lets you test a mix on different reference systems quickly, without ever leaving the sweet spot or needing any other speakers.

Fully accessorized
Measurement microphone included

Each iLoud Precision includes a high precision MEMS measurement microphone for the built-in ARC calibration that makes setting up the monitors a breeze.

Isolation pods included

Designed to meet the specific needs of audio professionals and musicians, each iLoud Precision includes a kit of 4 iLoud Isolation Pods. Enjoy enhanced audio clarity, consistency and imaging precision throughout the whole frequency spectrum as these custom pods dramatically reduce the propagation of vibrations between the speaker and supporting surface.

Optional remote control

The optional iLoud Precision Remote Control lets you switch easily between 4 X-MONITOR speaker emulations or custom voicings and assign functions like ARC On/Off, Mute or Dim. And for use with ARC room correction software, the remote can control the measurement/room calibration process from the desk while providing visual feedback on the process status.

Specs

6.5" ultralight coated paper mid-woofer
1.5" high output, low distortion chambered textile dome tweeter
Audiophile, custom-designed Class-D power amplifiers
150 W total RMS power
Max SPL, peak, pair, music, 1 m: 116 dB
Complete DSP controlled system, 96 kHz sampling rate
45 Hz to 30 kHz frequency response +/- 1 dB
37 Hz low frequency extension @-4 dB
Phase response: Coherent, 0/+20- max from 150 Hz up
Phase rotation at 100Hz (with high pass filter off): 45- max
Directivity (Vertical - all voices): +/-50-
Directivity (Vertical - Wide Dispersion mode): +65-/-50-
Continuous, long term SPL free field, 1 m distance, one speaker, fullband pink noise: 100 dB(A)
Peak SPL free field, 1 m distance, one speaker, fullband pink noise: 106 dB(A)
Peak SPL, half space, 1 m distance, one speaker, fullband pink noise: 108 dB(A)
Maximum peak SPL, per pair, 1 m distance, music program: 116 dB(A)
Crossover frequency: 1.9 kHz
Crossover type: 8th order, linear phase
LF Power amp (short term): 120 W
HF Power amp (short term): 30 W
Power amps distortion at nominal power: 0.005%
Total latency or TOF: 2.5 ms
Adjustable additional delay: 0-10 ms
High pass filter: off, 35, 50, 65, 80 Hz
LF contour: from -10 to +6 dB
Desk contour: from -10 to 0 dB
Mid contour: from -4 to +4 dB
HF contour: from -6 to +6 dB
Sentitivity: -4 dBu / 90 dBSPL
Input gain trim: +/-5 dB
Unit to unit consistency: +/-0.5 dB
Operating temperature (non condensing): from 0 to 35 -C
Coherent time response across the audio spectrum
High performance vented design
Built-in ARC room calibration
X-MONITOR technology
Remote control for X-MONITOR voice selection and measurement process control
X-MONITOR macOS and Windows control software
Handcrafted in Italy

Dimension and weight:
(H x W x D): 353 mm/13.89" x 201 mm/7.91" x 282 mm/11.10"
7.7 kg/17 lbs.

Packaging includes:

1 x iLoud Precision 6 monitor
Power cord
ARC Microphone
ARC Microphone clamp
USB-B to USB-A 2.5 m/8.2 ft. cable
1 x kit of 4 iLoud Isolation Pods

Notes: Studio monitors re-invented. Again.

iLoud Precision series represents another breakthrough in nearfield monitoring from the company that revolutionized compact monitors with iLoud Micro Monitor and iLoud MTM.

Available in a choice of 3 configurations - 2-way 5" or 6.5", and 2 x 5" MTM - these handmade works of sonic art reflect IK's 25+ years of expertise in loudspeaker design and digital signal processing, delivering a level of sonic detail that beats speakers at three times the price, with unique DSP-based features and software workflow enhancements that can't be found anywhere else.

Best-in-class frequency response

Creating mixes that translate perfectly to the outside world, iLoud Precision offers best-in-class frequency response with an extended range of 36 Hz - 30 kHz and a stunning +/- 1 dB accuracy ultra-flat response from 45 Hz to 30 kHz, for precise and uncolored audio throughout the entire listening range.

True linear phase response for unmatched clarity and translation

iLoud Precision leverages its advanced 96 kHz internal DSP system, digital crossover and custom-designed audiophile amplifiers to deliver true linear phase response above 150 Hz (and the very minimum possible phase rotation at low frequencies) for precise stereo imaging, sharp transients, incredibly solid bass and breathtaking detail. The result is a stunningly clear, transparent and revealing sound quality that's absolutely true to life.

Perfect time alignment that eliminates ear fatigue

iLoud Precision also sets a new standard for time coherence, or the precise timing alignment between all the portions of the audio spectrum. Reaching nearly the theoretical ideal performance, iLoud Precision offers the highest level of time accuracy, without sacrificing frequency response. Precise time alignment offers incredibly transient response and frequency balance and eliminates the ear fatigue that can develop over longer listening sessions on lesser monitors. Plus this improves the "readability" of the program and therefore translation.

Built-in acoustic calibration to hear your music and not your room

With iLoud Precision there's less worry about treating your room. Each speaker features built-in calibration based on the acclaimed ARC™ System technology. Just connect the included MEMS measurement microphone and in a few seconds, the iLoud Precisions will tune themselves to any environment from your mixing room to living room

Deep, controlled bass with or without a sub

With bass extension down to 36 Hz at only - 4 dB, iLoud Precision delivers deep, powerful bass that's nevertheless controlled and balanced, with minimum phase rotations. With ARC enabled, in many rooms iLoud Precision can reach as low as 30 Hz, while an adjustable bass roll-off lets Precisions integrate with a sub, for unparalleled low-end performance in any setup, without the need of an external crossover that could degrade sonic performance.

MTM configuration for point source sound

At the top of the range, the iLoud Precision MTM use the midwoofer-tweeter-midwoofer configuration to deliver not only the highest SPL, but also an ultra-precise, point source sound and an incredible stereo field. This means an even more natural, life-like sound, where the speaker cabinets "disappear" and attention can be focused entirely on the music.

Ideal for immersive setups

In addition to self-calibrating to the listening environment, iLoud Precision includes a range of low- and high-frequency management options, including a switchable Full/35/50/65/80 Hz extension to optimize their performance with Atmosr and other immersive setups.

Powerful software control

Extended calibration and custom voicing

The iLoud Precision series introduces X-MONITOR, a newly developed advanced control application for Mac and Windows that assists with ARC calibration and enables extended acoustic and voicing selection and adjustments to fine-tune iLoud Precision to your taste, plus convenient remote access to the settings on the Precision's back panel. The software is plug-n-play via a simple USB connection with no special setup needed.

Iconic studio monitors and popular speaker emulations

Even more exciting, X-MONITOR emulates the frequency and phase response of the most famous studio monitors on the market, as well as popular hi-fi speakers and mobile devices, for a breathtakingly true-to-life experience. Over 20 studio monitor profiles are included, and more will be released in the future, saving you money and space. A single pair of iLoud Precisions with X-MONITOR lets you test a mix on different reference systems quickly, without ever leaving the sweet spot or needing any other speakers.

Fully accessorized
Measurement microphone included

Each iLoud Precision includes a high precision MEMS measurement microphone for the built-in ARC calibration that makes setting up the monitors a breeze.

Isolation pods included

Designed to meet the specific needs of audio professionals and musicians, each iLoud Precision includes a kit of 4 iLoud Isolation Pods. Enjoy enhanced audio clarity, consistency and imaging precision throughout the whole frequency spectrum as these custom pods dramatically reduce the propagation of vibrations between the speaker and supporting surface.

Optional remote control

The optional iLoud Precision Remote Control lets you switch easily between 4 X-MONITOR speaker emulations or custom voicings and assign functions like ARC On/Off, Mute or Dim. And for use with ARC room correction software, the remote can control the measurement/room calibration process from the desk while providing visual feedback on the process status.

Specs

2x5" ultralight coated paper mid-woofer
1.5" high output, low distortion chambered textile dome tweeter
Audiophile, custom-designed Class-D power amplifiers
175 W total RMS power
Max SPL, peak, pair, music, 1 m: 119 dB
Complete DSP controlled system, 96 kHz sampling rate
45 Hz to 30 kHz frequency response +/- 1dB
37 Hz low frequency extension @-4 dB
Phase response: Coherent, 0/+20- max from 150 Hz up
Phase rotation at 100Hz (with high pass filter off): 40- max
Directivity (Vertical - all voices): +/-50-
Directivity (Vertical - Wide Dispersion mode): +65-/-65-
Continuous, long term SPL free field, 1 m distance, one speaker, fullband pink noise: 103.5 dB(A)
Peak SPL free field, 1 m distance, one speaker, fullband pink noise: 109.5 dB(A)
Peak SPL, half space, 1 m distance, one speaker, fullband pink noise: 111.5 dB(A)
Maximum peak SPL, per pair, 1 m distance, music program: 119.5 dB(A)
Crossover frequency: 1.9 kHz
Crossover type: 8th order, linear phase
LF Power amp (short term): 145 W
HF Power amp (short term): 30 W
Power amps distortion at nominal power: 0.005%
Total latency or TOF: 2.5 ms
Adjustable additional delay: 0-10 ms
High pass filter: off, 35, 50, 65, 80 Hz
LF contour: from -10 to +6 dB
Desk contour: from -10 to 0 dB
Mid contour: from -4 to +4 dB
HF contour: from -6 to +6 dB
Sentitivity: -4 dBu / 93 dBSPL
Input gain trim: +/-5 dB
Unit to unit consistency: +/-0.5 dB
Operating temperature (non condensing): from 0 to 35 -C
Coherent time response across the audio spectrum
High performance vented design
Built-in ARC room calibration
X-MONITOR technology
Remote control for X-MONITOR voice selection and measurement process control
X-MONITOR macOS and Windows control software

Dimension and weight
(H x W x D): 442 mm/17.40" x 177 mm/6.96" x 223 mm/8.77"
9.9 kg/21.8 lbs.

Package includes:

1 x iLoud Precision MTM monitor
Power cord
ARC Microphone
ARC Microphone clamp
USB-B to USB-A 2.5 m/8.2 ft. cable
1 x kit of 4 iLoud Isolation Pods

Notes: ***B-STOCK: Box opened, product in perfect working order***


Performance

Transparency. Clarity. Accuracy.

Kali Audio's Lone Pine Series studio monitors are designed to allow you to hear every detail that's happening in your mix.

This starts with an exceptionally accurate frequency response. Whatever is present on your mix is what you'll hear in these monitors. Nothing is boosted or suppressed to cover flaws or try to sound more pleasing.

With the LP-6 and LP-8, you can mix with more confidence, and you can also be assured that your mix will translate as best as possible to whatever systems your audience is using.

The 2nd Wave goes even further, utilizing a more robust DSP for an even flatter frequency response on the top end.

LP-6:
80W Class D Power
39 Hz Lower Frequency Response
< 3% System THD 94 dB @ 1M
115 dB Max SPL

Features

3-D Imaging Waveguide
Hear three dimensional sound from a stereo pair of speakers.
Dual-Layer Voice Coil
Large diameter voice coil allows for low distortion and high dynamic range.
Low Noise Port Tube
Precisely engineered using airflow

Accuracy
The LPs have always been praised for their accuracy, and we're pleased to share that the 2nd Wave versions realize slight but noticeable improvements in that regard, particularly on the top end.

Power

Kali Audio defines a listening distance as the maximum distance at which the speakers can play continuously at 85 dB while maintaining 20 dB dynamic headroom.

This means that anywhere within that listening distance, you can listen for long periods of time at reference volume, and momentary peaks such as bass drops or explosion effects will come through clearly and with minimal distortion. The LP-6 has enough output for most 1-2 person setups, and the LP-8 can handle larger setups easily. Full output specifications, along with maximum listening distances, can be found in the user's manual.

Bass on the LP-Series monitors is delivered by larger magnets and larger voice coils than any comparable speakers on the market. This gives you more accurate bass response that extends lower, so you can dial in exactly the low end sound you need. Bass response is not boosted or overhyped, but you can be sure that you're hearing the bass that you have on the track.

Protective limiters prevent harmful voltage from ever reaching the drivers, so there is no risk of blowing these speakers. These have been updated for the 2nd Wave, allowing for 3 dB higher output.

Both models use 40W for the 1" soft dome tweeter. The LP-6 uses 40W for the 6.5-Inch woofer, and the LP-8 uses 60W for the 8-Inch woofer.

Ease of use

Boundary EQ Control

A speaker's given position in a space can drastically change it's frequency response. A speaker placed against a wall or on a desk will sound very different than a speaker placed on a stand, even in a well-treated space. Hard surfaces like walls, desk tops, and recording consoles can change the low end frequency response of the monitor, and degrade the overall clarity of the sound.

Happily, most of the common positions are fairly predictable and easily corrected.

Kali's team did the Boundary EQ tuning at The Village Studios in Los Angeles, and came up with boundary compensation EQ settings to help you get the optimum sound for where you need to put your speakers. For the 2nd Wave, the boundary EQs have been updated for using the speakers on a desk with monitor stands.

Combined with the LF and HF trims, this will ensure that the speakers sound their best no matter what room you're mixing in, or where the speakers are placed.

Easy Connections

The LP-6 and LP-8 both feature balanced XLR and TRS inputs, and an unbalanced RCA input.

The RCA input can be set to -10 dBu sensitivity when you're using consumer devices like a laptop or smartphone's headphone jack.

Technology

3-D Imaging Waveguide

The waveguide on the Lone Pine Series studio monitors ensures that the directivity of the loudspeaker is smooth throughout its frequency response. What's more: it's calibrated so that the sound power of the loudspeaker helps you to perceive sound accurately.

In practical terms, what this means is that you're hearing spatial details in the recording that allow your brain to place elements of the recording in the space around you. This gives the speakers a more natural, lifelike feel that exposes more of the detail of the material that you're working on. This level of detail makes it easier to make critical decisions, as well as making these monitors pleasurable to mix on and listen to in general.

Low Noise Port Tube

A port has been added to the front of the LP-Series studio monitors, so that they could be used in small spaces where they'd be placed against walls. To prevent noise from the front port that distracts from the accuracy of the speaker, this special front port that doesn't make noise has been developed.

Notes: ***B-STOCK: Box opened, product in perfect working order***


KRK's ROKIT 4 G3 powered studio monitor offers professional performance and accuracy for recording, mixing, mastering and playback. The system consists of a 1" soft dome tweeter and 4" glass-Aramid composite woofer. It delivers high frequencies up to 35kHz, vocal clarity and extended bass response.

The proprietary bi-amped, class A/B amplifier grants SPL up to 102dB. The ROKIT waveguide is designed to ensure detailed imaging in the listening position. The front-firing bass port reduces boundary coupling to allow flexible positioning in the room while the engineered surface reduces diffraction distortion.

Multiple input connections ensure the ROKIT 4 G3 will easily integrate in any system configuration.

The ROKIT 4 is the most compact solution of the KRK ROKIT series, perfect to fit smaller rooms and any desktop application.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Stream your music

Do you wish you had the flexibility to stream a reference mix on more than just your hard-wired studio monitors? Do you own a Bluetoothr turntable but don't have the space to fit the speakers next to them? Get a better listening experience with our compact, attractive and Bluetoothr enabled M-Audio BX3BT multimedia reference monitors.

Amazing Sound, Compact Form

Designed to deliver a great listening experience, M-Audio's BX3BT monitors provide 120 Watts of transparent sound inside a bold, style-driven compact design that provides the ultimate solution for pro-grade sound. The two-way design features an Acoustically-inert MDF cabinet with bass reflex that provides robust lows through the Black Kevlarr drivers. Plus, enhanced rear ports and computer-optimised natural silk dome tweeters deliver the full spectrum of frequencies needed for any song, movie, or video game to sound big and lifelike!

Connect Your Devices

The BX3BT front and rear panel offer all the connections you would need to connect any playback device. The rear panel features 1/4", 1/8", and RCA inputs, while the front panel features 1/8" aux input and a headphone connection that turns the speakers off for private listening. Very handy for those late nights in the home office or mixing sessions where you do not want to disturb anyone.

Active Speaker Controls & EQ M-Audio BX3BT features controls on the rear panel that let you customise the EQ and active speaker placement. HighEQ and Low-EQ controls enable anyone to add or cut some extra rumble or clarity to their music. The M-Audio BX3BT features a Left/Right Active Speaker Position Switch letting you choose which speaker is sounding from the Left or Right side.

Limitless Creativity with MPC Beats Software DAW - Effects and Instruments Included

The M-Audio BX3BT comes bundled with MPC Beats, the powerful music-making and recording desktop software DAW for Mac and PC based on iconic MPC hardware. Featuring a full array of musical instrument plugins, effect plugins, and audio and drum samples, MPC Beats is the best way to start making great-sounding music quickly.

Technical Specifications

Frequency Response: L 80 Hz - 22 kHz
Output Power: 120 W (total peak), 2 x 25 W (RMS)
Drivers: LF Driver 3.5" / 88.9 mm, HF Driver 1" / 25.4 mm; silk dome
Audio Inputs: (1) RCA stereo input pair 2 1/4" (6.35 mm)
TRS inputs: (1) 1/8" (3.5 mm) stereo auxiliary input
Headphone Output: 1/8" (3.5 mm) stereo output
Interconnection Cable: 1/8" (3.5 mm)TRS
Power: 100-240 VAC, 50/60 Hz, 85 W
Bluetooth Range: 100' (30.5 m)
Dimensions (width x depth x height, per speaker): 5.5" x 5.7" x 8.2" 140 x 145 x 208 mm
Weight: (per pair of speakers) 7.39 lbs. 3.35 kg

Notes: PreSonus Eris-series studio monitors are used worldwide by audio engineers and producers who need to hear every detail of their recordings. Our best-selling studio monitors just got better! Eris 3.5 media reference monitors deliver studio-quality sound in an elegant, compact form factor that makes them ideally suited for bedroom studios, video production, and high-fidelity gaming setups.

With 25 watts per side of onboard power, the Eris 3.5 reference monitors pack a serious punch, while still delivering clear, accurate audio. The weave and nature of the Eris 3.5's 3.5-inch woofer result in tight bass that you can feel, as well as cleaner overall sound. The one-inch silk-dome tweeter produces refined high-frequencies and is designed to radiate sound with a wide pattern, creating a large optimal listening area. Improved speaker voicing over previous designs delivers richer lows and a smoother crossover transition for articulate, accurate transient reproduction throughout the frequency range and a less-fatiguing listening experience.

A convenient front-panel knob sets the level of both the power amp and the loud, clear headphone amplifier, with its front-panel jack. With three types of inputs, it's easy to connect just about any audio source to Eris 3.5 reference monitors. High- and low-frequency controls let you easily adjust the Eris speaker's frequency response to compensate for the acoustics of your space and create the most accurate sonic reproduction possible.

Need a little more low end? Add an Eris Sub8 BT to build a perfectly matched 2.1 sound system that fits almost anywhere.

Features

3.5-inch, woven-composite, low-frequency driver
1-inch, ultra-low mass, silk-dome, high-frequency driver
50W, Class AB dual amplification
80 Hz to 20 kHz frequency response
98 dB SPL (Peak, @ 1 meter)
High- and low-frequency Acoustic Tuning controls
Balanced, 14-inch TRS inputs; unbalanced, 1/8-inch stereo and RCA inputs; and integrated stereo headphone amplifier with front-panel 1/8-inch output
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)
Comes with speaker wire, 1/8-inch TRS to stereo RCA cable, and stereo RCA to stereo TS cable

Versatile connectivity.

PreSonusr Erisr 3.5 reference monitors connect to virtually any line-level audio source, using rear-panel, 14-inch TRS and RCA inputs and a front-panel, 1/8-inch, stereo line input. You also get a convenient (and loud!) front-panel, 1/8-inch, stereo headphone jack; connecting headphones mutes the speakers.

Built to match your room.

Unlike other home audio speakers that hype the bass at the expense of other frequencies, Erisr speakers provide an even response throughout the frequency range, from bass to treble. This means you'll hear your favourite music exactly as artists and engineers intend it to be heard. High and Low Acoustic Tuning controls let you dial in the Eris 3.5s precisely to your environment to further ensure the best sound possible.
Honest. Expressive. Powerful.

Like all PreSonus media reference monitors, the Erisr 3.5 offers consistent, accurate listening. Their stylish design makes them a welcome addition to living rooms, compact home theatre setups, and gaming rigs, and their smooth and even frequency response ensures that your music - and everyone else's - will sound incredible.

Specs

Electronics
Voltage: 220-240V UK
Wattage: 25 Watts (Each Speaker)
Input impedance: 10 kO

Performance
Peak SPL: 98 dB (@ 1 meter)

Speakers
Crossover frequency: 2.8 kHz

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard
Audio controls: Volume High Frequency (+/-6 dB, center 10 kHz, continuously variable) Low Frequency (+/-6 dB, center 100 Hz, continuously variable)
Monitor inputs: Bluetooth 5.0, 1 x Stereo 1/8", 2 x Balanced 1/4" TRS, 2 x Unbalanced RCA
Power amplifier type: Class AB

Measurements
Dimensions: 8.30 x 5.50 x 6.00 in

Depth: 6.5" (16.4 cm)
Height: 8.3" (21.0 cm)
Width: 5.6" (14.1 cm)

Notes: PreSonus' Eris 3.5BT studio monitors are the perfect way to bring studio-quality sound to your home. With Bluetooth wireless connectivity, you can stream your favourite music from any device, and with their 50W of onboard Class AB power, you can enjoy loud, clear audio without any distortion.

The Eris 3.5BT studio monitors are also perfect for gaming and content creation. Fine-tune the speakers' response to your exact needs with low- and high-frequency tuning controls or listen to your music in private with the integrated headphone amplifier.

The Eris 3.5BT speakers are also incredibly versatile. They're small enough to fit on any desk, but they're powerful enough to fill any room with sound. They'll look great in any environment with their elegant design.

Features

3.5-inch, woven-composite, low-frequency transducer
1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
Fast, reliable, stereo Bluetoothr 5.0 wireless input
50W (25W/side) Class AB amplification
80 Hz to 20 kHz frequency response
98 dB SPL (Peak, @ 1 meter)
High- and low-frequency Acoustic Tuning controls
Balanced, 14-inch TRS inputs; unbalanced, 1/4-inch stereo and RCA inputs; and integrated stereo headphone amplifier with front-panel 1/4-inch output
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)
Comes with speaker wire, 1/4-inch TRS to stereo RCA cable, and stereo RCA to stereo TS cable

Versatile connectivity.

PreSonus Eris 3.5 BTs connect wirelessly using Bluetooth 5.0 or via a wired connection to virtually any line-level audio source, using rear-panel 14-inch TRS and RCA inputs and a front-panel, 1/4-inch stereo line input. You also get a convenient (and loud!) front-panel, 1/4-inch stereo headphone jack; connecting headphones mutes the speakers.

Built to match your room.

Unlike other home audio speakers that hype the bass at the expense of other frequencies, Erisr speakers provide an even response throughout the frequency range, from bass to treble. This means you'll hear your favourite music exactly as artists and engineers intend it to be heard. High and Low Acoustic Tuning controls let you dial in the Eris 3.5 BTs precisely to your environment to further ensure the best sound possible.

Honest. Expressive. Powerful.

Like all PreSonus media reference monitors, the Erisr 3.5 BT offers consistent, accurate listening. Their stylish design makes them a welcome addition to living rooms, compact home theatre setups, and gaming rigs, and their smooth and even frequency response ensures that your music - and everyone else's - will sound incredible.

Electronics
Voltage: 220-240V UK
Wattage: 25 Watts (Each Speaker)
Input impedance: 10 kO

Speakers
Crossover frequency: 2.8 kHz

Performance
Peak SPL: 98 dB (@ 1 Meter)

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard
Audio controls: Volume High Frequency (+/-6 dB, center 10 kHz, continuously variable) Low Frequency (+/-6 dB, center 100 Hz, continuously variable)
Monitor inputs: Bluetooth 5.0, 1- Stereo 1/8", 2-Balanced 1/4" TRS, 2-Unbalanced RCA
Power amplifier type: Class AB

Measurements

Dimensions: 8.30 x 5.50 x 6.00 in

Product depth: 6.5" (16.4 cm)
Product height: 8.3" (21.0 cm)
Product width: 5.6" (14.1 cm)

Notes: Exceptional value from PreSonus's entry-level studio monitors, packing a surprising punch for such small speakers. Add the optional Eris Sub 8BT subwoofer for serious low-end power.

Supplier's notes:
Presonus' best selling studio monitors just got better! Eris 4.5 BT media reference monitors deliver studio-quality sound in an elegant, compact form factor that makes them ideally suited for bedroom studios, video production, and high-fidelity gaming setups.

With 25 watts per side of onboard power, the Eris 4.5 BT reference monitors pack a serious punch, while still delivering clear, accurate audio. The weave and nature of the Eris 4.5 BT's 4.5-inch woofer result in tight bass that you can feel, as well as cleaner overall sound. The one-inch silk-dome tweeter produces refined high-frequencies and is designed to radiate sound with a wide pattern, creating a large optimal listening area. Improved speaker voicing over previous designs delivers richer lows and a smoother crossover transition for articulate, accurate transient reproduction through the frequency range and a less-fatiguing listening experience.

A convenient front-panel knob sets the level of both the power amp and the loud, clear headphone amplifier, with its front-panel jack. With four types of inputs, including fast, reliable, stereo Bluetoothr 5.0 connectivity, it's easy to connect just about any audio source to your Eris 4.5 BT reference monitors. High- and low-frequency controls let you easily adjust your Eris speaker's frequency response to compensate for the acoustics of your space and create the most accurate sonic reproduction possible.

Need a little more low end? Add an Eris Sub8 BT to build a perfectly matched 2.1 sound system that fits almost anywhere.

Features

4.5-inch, woven-composite, low-frequency driver
1-inch, ultra-low mass, silk-dome, high-frequency driver
Fast, reliable stereo Bluetoothr 5.0 wireless input
50W, Class AB dual amplification
70 Hz to 20 kHz frequency response
100 dB SPL (Peak, @ 1 meter)
High- and low-frequency Acoustic Tuning controls
Balanced, 14-inch TRS inputs; unbalanced, 1/4-inch stereo and RCA inputs; and integrated stereo headphone amplifier with front-panel 1/4-inch output
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)
Comes with speaker wire, 1/4-inch TRS to stereo RCA cable, and stereo RCA to stereo TS cable

Built to match your room.

Unlike other home audio speakers that hype the bass at the expense of other frequencies, Eris speakers provide an even response throughout the frequency range, from bass to treble. This means you'll hear your favourite music exactly as artists and engineers intend it to be heard. High and Low Acoustic Tuning controls let you dial in the Eris 4.5 BTs precisely to your environment to further ensure the best sound possible.


Honest. Expressive. Powerful.

Like all PreSonus media reference monitors, the Eris 4.5 BT offers consistent, accurate listening. Their stylish design makes them a welcome addition to living rooms, compact home theatre setups, and gaming rigs, and their smooth and even frequency response ensures that your music - and everyone else's - will sound incredible.

Electronics

Voltage: 220-240V UK
Wattage: 25 Watts (Each Speaker)
Input impedance: 10 kO

Performance

Peak SPL: 100 dB (@ 1 meter)

Speakers
Crossover frequency: 2.8 kHz

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard
Audio controls: Volume High Frequency (+/-6 dB, center 10 kHz, continuously variable) Low Frequency (+/-6 dB, center 100 Hz, continuously variable)
Monitor inputs: Bluetooth 5.0, 1 x Stereo 1/8", 2 x Balanced 1/4" TRS, 2 x Unbalanced RCA
Power amplifier type: Class AB

Measurements

Dimensions: 9.50 x 6.40 x 7.00 IN

Product depth: 7" (17.8 cm)
Product height: 9.5" (24 cm)
Product width: 6.4" (16.3 cm)

Notes: Some of our favourite compact studio monitors get updated with Bluetooth streaming for convenience. Enjoy punchy studio-reference sound via wired connection to your interface, then stream from mobile devices for casual listening.

Supplier's notes:
Presonus' best selling studio monitors just got better! Eris 5 BT media reference monitors deliver studio-quality sound in an elegant, compact form factor that makes them ideally suited for bedroom studios, video production, and high-fidelity gaming setups.

With 50 watts per side of onboard power, the Eris 5 BT reference monitors pack a serious punch, while still delivering clear, accurate audio. The weave and nature of the Eris 5 BT's 5.25-inch woofer result in tight bass that you can feel, as well as cleaner overall sound. The one-inch silk-dome tweeter produces refined high-frequencies and is designed to radiate sound with a wide pattern, creating a large optimal listening area. Improved speaker voicing over previous designs delivers richer lows and a smoother crossover transition for articulate, accurate transient reproduction through the frequency range and a less-fatiguing listening experience.

A convenient front-panel knob sets the level of both the power amp and the loud, clear headphone amplifier, with its front-panel jack. With four types of inputs, including fast, reliable, stereo Bluetoothr 5.0 connectivity, it's easy to connect just about any audio source to your Eris 5 BT reference monitors. High- and low-frequency controls let you easily adjust your Eris speaker's frequency response to compensate for the acoustics of your space and create the most accurate sonic reproduction possible.

Need a little more low end? Add an Eris Sub8 BT to build a perfectly matched 2.1 sound system that fits almost anywhere.

Features

5.25-inch, woven-composite, low-frequency driver
1-inch, ultra-low mass, silk-dome, high-frequency driver
Fast, reliable stereo Bluetoothr 5.0 wireless input
100W, Class D dual amplification
55 Hz to 20 kHz frequency response
104 dB SPL (Peak, @ 1 meter)
High- and low-frequency Acoustic Tuning controls
Balanced, 14-inch TRS inputs; unbalanced, 1/4-inch stereo and RCA inputs; and integrated stereo headphone amplifier with front-panel 1/4-inch output
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)
Comes with speaker wire, 1/4-inch TRS to stereo RCA cable, and stereo RCA to stereo TS cable

Versatile connectivity.

PreSonus Eris 5 BTs connect wirelessly using Bluetooth 5.0 or via a wired connection to virtually any line-level audio source, using rear-panel 14-inch TRS and RCA inputs and a front-panel, 1/4-inch stereo line input. You also get a convenient (and loud!) front-panel, 1/4-inch stereo headphone jack; connecting headphones mutes the speakers.
Built to match your room.

Unlike other home audio speakers that hype the bass at the expense of other frequencies, Erisr speakers provide an even response throughout the frequency range, from bass to treble. This means you'll hear your favourite music exactly as artists and engineers intend it to be heard. High and Low Acoustic Tuning controls let you dial in the Eris 5 BTs precisely to your environment to further ensure the best sound possible.

Honest. Expressive. Powerful.

Like all PreSonus media reference monitors, the Eris 5 BT offers consistent, accurate listening. Their stylish design makes them a welcome addition to living rooms, compact home theatre setups, and gaming rigs, and their smooth and even frequency response ensures that your music - and everyone else's - will sound incredible.

Specs

Electronics
Voltage: 220-240V UK
Wattage: 100 Watts
Input impedance: 10 kO

Performance

Peak SPL: 104 dB (@ 1 meter)

Speakers
Crossover frequency: 3.3 kHz

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard
Audio controls: Volume High Frequency (+/-6 dB, center 10 kHz, continuously variable) Low Frequency (+/-6 dB, center 100 Hz, continuously variable)
Monitor inputs: Bluetooth 5.0, One - Stereo 1/8", Two - Balanced 14" TRS, Two - Unbalanced RCA
Power amplifier type: Class D

Measurements
Dimensions: 7.00 x 10.20 x 7.90 in
Product depth: 7.9" (20 cm)
Product height: 10.3" (26.16 cm)
Product width: 7" (17.8 cm)

Notes: ***B-STOCK: Box damaged, product in perfect working order***


Incredible value for money from one of the baby options in Presonus's excellent Eris monitor range. Classic two-way design offering sound bigger than you might expect from a 5.25-inch woofer.

This monitor comes with free Studio One Prime and Studio Magic plug-ins.

Supplier's notes:
The Eris E5 2 way active 5.25" studio monitor from PreSonus delivers an accurate response with tight bass and a clear upper end. The Kevlar low frequency transducers, low-mass silk-dome tweeters and responsive Class AB amplification combine with acoustic-adjustment controls to create a versatile and adaptable listening system.

The E5 begins with a front-ported enclosure made of vinyl-laminated MDF. It features a 5.25" Kevlar low-frequency driver mated with a 45W, Class AB amplifier. For the highs, the Eris employs a 1" silk-dome tweeter powered by a 35W, Class AB amplifier. The E5 outputs a clean 102 dB peak SPL. Its frequency response is rated at 64Hz to 22kHz.

The Eris E5 provides a balanced XLR, a balanced 14" TRS, and an unbalanced RCA line-level input. Once you're plugged in, set the input gain and you're ready to go.

The Eris provides 3-EQ controls in its acoustic tuning section: high, mid, and low cutoff. These controls enable you to fine-tune the monitors to your space. The low control also is useful when using the E5 with a subwoofer.

The High control is a shelving filter that boosts or cuts all frequencies above 4.5kHz by as much as 6dB. The mid control is a mid-frequency peak filter that boosts or cuts frequencies centered at 1kHz and extending about one octave above and below that frequency. The low cutoff control rolls off frequencies below either 80 or 100Hz at a slope of 12dB/octave. This control is especially useful if you also have a connected subwoofer.

A 3-position acoustic space switch controls a second-order, low shelving filter that cuts frequencies below 800Hz by either 2 or 4dB to compensate for the boundary bass boost that occurs in close proximity to walls or corners.

The RF shielding protects against radio frequencies that could be introduced to the signal and become audible. The Eris monitors also provide overheat protection, current-output limiting and subsonic protection. The Soft startup amplifiers prevent damaging pops from sounding through the speakers when you power them up.

Notes: Excellent studio-quality sound in a compact package from this clever PreSonus design. 4.5-inch coaxial drivers deliver point source reproduction, for precise imagine and off-axis response.

Supplier's Notes:
The Eris Pro 4 reference monitors employ a single point-source coaxial design for clear and accurate sound reproduction. This design provides superior phase alignment between components and delivers a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns - unique advantages for Dolby Atmos immersive rooms as well as stereo mix environments.

The Eris Pro 4 also delivers finely detailed transient response, and stunning dynamics that create a natural and less fatiguing listening experience. A 1-inch ultra-low mass, silk-dome tweeter ensures snappy, accurate transient reproduction, while a 4.5-inch woven-composite woofer offers tight, clear bass, with plenty of punch and no flab. A ported enclosure and 80 Watts of power allows the Eris Pro 4 to reach down to 55 Hz.

Acoustic tuning controls let you configure the Eris Pro 4 for your room and three-way Acoustic Space tuning can compensate for the effects of speaker placement against a wall or in a corner.

Flexible input options let you connect almost any line-level source, from mixers to audio interfaces and more. You'll have no problem hooking your Eris speakers up to virtually anything. Lastly, provisions for wall and ceiling mounts make it easy to integrate Eris Pro 4 monitors into any stereo or multi-channel system.

Specifications

Series: Erisr
Colour: Black
Country of origin: CN

Electronics

Voltage: 220-240V UK
Wattage: 80 Watts
Input impedance: 10 kO

Performance
Peak SPL: 99 dB (@ 1 meter)

Speakers
Crossover frequency: 3.4 kHz

Hardware

Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard
Audio controls: Volume High Frequency (+/-6 dB, centre 10 kHz, continuously variable) Mid Frequency (+/-6 dB, centre 1 kHz, continuously variable)
Audio switches: Acoustic Space (Flat, -2 dB, -4 dB) Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
Monitor inputs:1- Balanced XLR, 1- Balanced 14" TRS, 1- Unbalanced RCA
Power amplifier type: Class AB

Measurements

Dimensions: 8.50x7.00x5.00 IN
Shipping weight: 9.04 LB
Product depth: 8.6" (21.8 cm)
Product height: 9" (22.9 cm)
Product width: 7.5" (19 cm)

Shipping length: 5.00 IN
Shipping height: 8.50 IN
Shipping width: 7.00 IN

Accessories
Footswitch: N/A

Miscellaneous
Power cable: IEC

Protections:

RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter

Notes: Listen to your mixes reproduced with lifelike realism! The Erisr Pro 6's symmetric design and consistent acoustic centre provides superior phase alignment between components to deliver a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns, making them ideally suited for immersive Dolby Atmos rooms and stereo mix environments alike.

The Eris Pro 6's coaxial design provides a single acoustic point source that creates a natural listening experience, revealing the subtlest nuances in your recordings, while providing a three-dimensional soundstage, detailed transient response, and lifelike sonic reproduction. Combined with a punchy low-end that defies its compact size, the Eris Pro 6 provides a superior listening experience for both home studios and professional mix rooms.

A 1.25-inch, ultra-low mass, silk-dome tweeter ensures snappy, accurate transient reproduction, while a 6.5-inch, woven-composite woofer offers tight, clear bass, with plenty of punch and no flab. A ported enclosure and 140 watts of power allows the Eris Pro 6 to reach down to an astonishing 35 Hz, while a finely detailed transient response and stunning dynamics deliver a natural and less fatiguing experience.

Acoustic tuning controls and a three-way Acoustic Space tuning lets you accurately configure the Eris Pro 6 for your room. Flexible input options enable connection to almost any line-level source, from mixers to audio interfaces and more. Provisions for wall and ceiling mounts make it easy to integrate Eris Pro 6 monitors into any stereo or multi-channel system.

Features

Single point-source coaxial design for wider sweet spot and better phase alignment
6.5-inch, woven-composite, low-frequency driver
1.25-inch, silk-dome, high-frequency driver
140W, Class AB amplification
35 Hz to 20 kHz frequency response
103 dB SPL (Peak, @ 1 meter)
Acoustic Tuning Controls: Acoustic Space (Flat, -2 dB, -4 dB), High Frequency (+/-6 dB, centre 10 kHz, continuously variable), Mid Frequency (+/-6 dB, centre 1 kHz, continuously variable), Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
XLR and 14-inch TRS balanced and RCA unbalanced rear-panel stereo inputs
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)
Wall and ceiling mountable

Inspired design for inspiring results.

Placing the high-frequency driver in the centre of the low-frequency driver increases clarity, widens stereo imaging, and produces an incredibly even mid-range. Vocal clarity, the attack of a snare, and guitar presence shine through, allowing you to quickly and accurately place them in a mix and get the results you desire faster than ever before.

Symmetric response.

The Erisr Pro 6's coaxial design provide a symmetrical dispersion resulting in a crisper stereo image, greater soundstage depth, and superior separation between components in a complex mix.

Set up your studio monitors for your room.

Acoustic Tuning controls ensure you'll get the flattest frequency response possible in your mix environment. You get Low Cut, Mid, and High controls, as well as 3-way Acoustic Space tuning that allows you to easily compensate for the sonic consequences of speaker placement against a wall or in a corner.

Electronics
Voltage: 220-240V UK
Wattage: 140 Watts

Input impedance: 10 k?

Speakers

Crossover frequency: 3.2 kHz

Performance

Peak SPL: 106 dB (@ 1 meter)

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard

Audio controls: Volume High Frequency (+/-6 dB, centre 10 kHz, continuously variable) Mid Frequency (+/-6 dB, centre 1 kHz, continuously variable)

Audio switches:

Acoustic Space (Flat, -2 dB, -4 dB) Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)

Monitor inputs: 1- Balanced XLR, 1- Balanced 14" TRS, 1- Unbalanced RCA

Measurements

Dimensions: 11.40 x 9.40 x 11.20 in

Product depth: 11.19" (28.4 cm)
Product height: 11.4" (29 cm)
Product width: 9.45" (24 cm)

Notes: PreSonus showcase their expertise with these painstakingly crafted monitors. Coaxial design offers all the benefits of a point source, for precise stereo imagine and phase alignment.

Supplier's Notes:
Listen to your mixes reproduced with lifelike realism! The Erisr Pro 8's symmetric design and consistent acoustic centre provides superior phase alignment between components to deliver a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns, making them ideally suited for immersive Dolby Atmos rooms and stereo mix environments alike.

The Eris Pro 8's coaxial design provides a single acoustic point source that creates a natural listening experience, revealing the subtlest nuances in your recordings, while providing a three-dimensional soundstage, detailed transient response, and lifelike sonic reproduction. Combined with a punchy low-end that defies its compact size, the Eris Pro 8 provides a superior listening experience for both home studios and professional mix rooms.

A 1.25-inch, ultra-low mass, silk-dome tweeter ensures snappy, accurate transient reproduction, while a 8-inch, woven-composite woofer offers tight, clear bass, with plenty of punch and no flab. A ported enclosure and 140 watts of power allows the Eris Pro 8 to reach down to an astonishing 35 Hz, while a finely detailed transient response and stunning dynamics deliver a natural and less fatiguing experience.

Acoustic tuning controls and a three-way Acoustic Space tuning lets you accurately configure the Eris Pro 8 for your room. Flexible input options enable connection to almost any line-level source, from mixers to audio interfaces and more. Provisions for wall and ceiling mounts make it easy to integrate Eris Pro 8 monitors into any stereo or multi-channel system.

Features

Single point-source coaxial design for wider sweet spot and better phase alignment
8-inch, woven-composite, low-frequency driver
1.25-inch, silk-dome, high-frequency driver
140W, Class AB amplification
35 Hz to 20 kHz frequency response
105 dB SPL (Peak, @ 1 meter
Acoustic Tuning Controls: Acoustic Space (Flat, -2 dB, -4 dB), High Frequency (+/-6 dB, center 10 kHz, continuously variable), Mid Frequency (+/-6 dB, center 1 kHz, continuously variable), Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
XLR and 14-inch TRS balanced and RCA unbalanced rear-panel stereo inputs
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)
Wall and ceiling mountable

Inspired design for inspiring results

Placing the high-frequency driver in the centre of the low-frequency driver increases clarity, widens stereo imaging, and produces an incredibly even mid-range. Vocal clarity, the attack of a snare, and guitar presence shine through, allowing you to quickly and accurately place them in a mix and get the results you desire faster than ever before.

Symmetric response

The Eris Pro 8's coaxial design provide a symmetrical dispersion resulting in a crisper stereo image, greater soundstage depth, and superior separation between components in a complex mix.

Set up your studio monitors for your room

Acoustic Tuning controls ensure you'll get the flattest frequency response possible in your mix environment. You get Low Cut, Mid, and High controls, as well as 3-way Acoustic Space tuning that allows you to easily compensate for the sonic consequences of speaker placement against a wall or in a corner.

Specs

Electronics

Voltage: 220-240V UK
Wattage: 140 Watts
INPUT IMPEDANCE
Input impedance: 10KO

Performance
Peak SPL: 108 dB (@ 1 Meter)

Speakers
Crossover frequency: 3.1 kHz

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard

Audio controls: Volume High Frequency (+/-6 dB, center 10 kHz, continuously variable) Mid Frequency (+/-6 dB, center 1 kHz, continuously variable)

Audio switches

Acoustic Space (Flat, -2 dB, -4 dB) Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)

Monitor inputs: 1- Balanced XLR, 1- Balanced 14" TRS, 1- Unbalanced RCA

Power amplifier type: Class AB

Measurements

Dimensions: 12.80 x 10.60 x 12.20 in

Depth: 12.2" (30.1 cm)
Height: 12.82" (32.6 cm)
Width: 10.63" (27 cm)

Notes: The Eris Studio 4 sets a new standard for compact studio monitors. With its surprising amount of low-end and a wide, well-controlled sweet spot, you can enjoy premium, accurate monitoring in even the smallest of mixing spaces. Designed for superior performance in both home studios and small professional mix rooms, the Eris Studio 4 combines flexible connectivity with sonic accuracy that puts it a class all its own.

The custom-designed EBM (Elliptical Boundary Modeled) waveguide provides superior high-frequency response that allows you to hear the finest details in your mix, while a wide 100-degree horizontal dispersion creates a broad sweet spot with lifelike stereo imaging. Narrow vertical dispersion reduces reflections from your desk, and a silk-dome tweeter ensures snappy, accurate transient reproduction.

The 4.5-inch, woven-composite, low-frequency driver produces tight, clear bass with plenty of punch that defies the Eris Studio 4's space-saving size. The ported enclosure and 50W of biamped power combine to maximize bass response and allow the Eris Studio 4 to reach down to an astonishing 55 Hz - without a subwoofer!

Flexible input options let you connect almost any line-level source, from mixers to audio interfaces and more. You'll have no problem hooking Eris speakers up to virtually anything.

Features

4.5-inch, woven-composite, low-frequency transducer
1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
100-(H) x 60-(V) EBM waveguide for wide sweet spot
Front-firing acoustic port for superior bass-frequency reproduction and optimized, resonance-suppressing internal bracing
50W, Class AB biamplification
55 Hz to 20 kHz frequency response
100 dB SPL (Peak, @ 1 meter)
Acoustic Tuning controls: HF (+/-6 dB, continuously variable); Midrange (+/-6 dB, continuously variable), and Acoustic Space (flat, -2, -4 dB), plus highpass filter (Off, 80 Hz, 100 Hz)
RF interference, output-current limiting, over-temperature, transient, subsonic protection and amplifier "soft start" feature (eliminates popping on power-up)
Internal power supply with IEC connector and power switch with on/off LED
Balanced XLR and 14-inch inputs and unbalanced RCA inputs

Set up your studio monitors for your room.

Erisr Studio 4 active monitors are equipped with Acoustic Tuning controls to ensure the flattest response in your mix environment. You get Low Cut, Mid, and High controls, as well as three-way Acoustic Space tuning that makes it easy to compensate for the boundary bass boost that occurs when a speaker is placed too close to a wall.

Honest. Expressive. Powerful.

Like all PreSonusr studio monitors, the Erisr Studio 4 offers consistent, accurate listening. Their stylish design makes them a welcome addition to any mix space, and their smooth, incredibly even frequency response ensures that your mixes will sound great everywhere.

Specs

Electronics
Voltage: 220-240V UK
Wattage: 80 Watts
Input impedance: 10 kO

Performance
Peak SPL: 99 dB (@ 1 meter)

Speakers
Crossover frequency: 2.7 kHz

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard

Audio controls: Volume High Frequency (+/-6 dB, center 10 kHz, continuously variable) Mid Frequency (+/-6 dB, center 1 kHz, continuously variable)

Audio switches: Acoustic Space (Flat, -2 dB, -4 dB) Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)

Monitor inputs: 1- Balanced XLR, 1- Balanced 14" TRS, 1- Unbalanced RCA
Power amplifier type: Class AB

Measurements

Dimensions: 10.00 x 7.00 x 7.20 in

Depth: 7.28" (18.5 cm)
Height: 10" (25.4 cm)
Width: 7" (17.8 cm)

Notes: Building on the reputation of its award-winning predecessors, the Erisr Studio 5 is a substantial update that delivers richer low-end and more controlled high-frequency response that reproduces every detail in your recordings with a natural sound unparalleled in its class. Designed for superior performance in both home studio and small professional mix rooms, the Eris Studio 5 combines flexible connectivity with sonic accuracy that puts it a class all its own.

The custom-designed EBM (Elliptical Boundary Modeled) waveguide provides superior high-frequency response and wide 100-degree horizontal dispersion to create a broader sweet spot. Narrow vertical dispersion reduces reflections from your desk, and a silk-dome tweeter ensures snappy, accurate transient reproduction. An elegant new enclosure design improves the waveguide performance so you'll hear the finest details in your mix.

The woven-composite low-frequency driver offers Eris' signature tight, clear bass with plenty of punch. Its 80W of biamped power make the Eris Studio 5 more efficient than previous designs. The ported enclosure maximizes bass response and allows the Eris Studio 5 to reach down to an astonishing 48 Hz - without a subwoofer!

Flexible input options let you connect almost any line-level source, from mixers to audio interfaces and more. You'll have no problem hooking your Eris speakers up to virtually anything.

Features

5.25-inch woven composite low-frequency driver
1-inch, ultra-low mass, silk-dome, high frequency driver
Crossover Frequency, 3.5 kHz
100- x 60- EBM waveguide provides a sweet spot
Front-firing acoustic port for superior bass-frequency reproduction and optimized, resonance-suppressing internal bracing
80W, Class AB dual amplification
48 Hz to 20 kHz frequency response
102 dB Peak SPL (@ 1 meter)
Acoustic Tuning Controls:
Acoustic Space (Flat, -2 dB, -4 dB)
High Frequency (+/-6 dB, center 10 kHz, continuously variable)
Mid Frequency (+/-6 dB, center 1 kHz, continuously variable)
Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)

Inputs:
XLR and 1/4-inch TRS balanced rear-panel inputs
RCA unbalanced rear-panel inputs

Protection:
RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
Power Saver mode (engages after 40 minutes)

Set up your studio monitors for your room.

Erisr Studio 5 active monitors are equipped with Acoustic Tuning controls to ensure the flattest response in your mix environment. You get Low Cut, Mid, and High controls, as well as three-way Acoustic Space tuning that makes it easy to compensate for the boundary bass boost that occurs when a speaker is placed too close to a wall.

Honest. Expressive. Powerful.

Like all PreSonus studio monitors, the Eris Studio 5 offers consistent, accurate listening. Their stylish design makes them a welcome addition to any mix space and their smooth, incredibly even frequency response ensures that your mixes will sound great everywhere.

Specs

Electronics
Voltage: 220-240V UK
Wattage: 80 Watts
Input impedance: 10kO

Performance

Peak SPL: 102 dB (@ 1 meter)

Speakers
Crossover frequency: 3.5 kHz
Coverage pattern: 100 degree (H) x 60 degree (V)

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard

Audio controls: Volume High Frequency (+/-6 dB, center 10 kHz, continuously variable) Mid Frequency (+/-6 dB, center 1 kHz, continuously variable)

Audio switches: Acoustic Space (Flat, -2 dB, -4 dB) Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)

Monitor inputs: 1- Balanced XLR, 1- Balanced 14" TRS, 1- Unbalanced RCA

Power amplifier type: Class AB

Measurements

Dimensions: 11.50 x 8.00 x 8.80 in

Product depth: 8.78" (22.3 cm)
Product height: 11.5" (29.2 cm)
Product width: 8" (20.32 cm)

Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


Building on the reputation of its award-winning predecessors, the Erisr Studio 5 is a substantial update that delivers richer low-end and more controlled high-frequency response that reproduces every detail in your recordings with a natural sound unparalleled in its class. Designed for superior performance in both home studio and small professional mix rooms, the Eris Studio 5 combines flexible connectivity with sonic accuracy that puts it a class all its own.

The custom-designed EBM (Elliptical Boundary Modeled) waveguide provides superior high-frequency response and wide 100-degree horizontal dispersion to create a broader sweet spot. Narrow vertical dispersion reduces reflections from your desk, and a silk-dome tweeter ensures snappy, accurate transient reproduction. An elegant new enclosure design improves the waveguide performance so you'll hear the finest details in your mix.

The woven-composite low-frequency driver offers Eris' signature tight, clear bass with plenty of punch. Its 80W of biamped power make the Eris Studio 5 more efficient than previous designs. The ported enclosure maximizes bass response and allows the Eris Studio 5 to reach down to an astonishing 48 Hz - without a subwoofer!

Flexible input options let you connect almost any line-level source, from mixers to audio interfaces and more. You'll have no problem hooking your Eris speakers up to virtually anything.

Features

5.25-inch woven composite low-frequency driver
1-inch, ultra-low mass, silk-dome, high frequency driver
Crossover Frequency, 3.5 kHz
100- x 60- EBM waveguide provides a sweet spot
Front-firing acoustic port for superior bass-frequency reproduction and optimized, resonance-suppressing internal bracing
80W, Class AB dual amplification
48 Hz to 20 kHz frequency response
102 dB Peak SPL (@ 1 meter)
Acoustic Tuning Controls:
Acoustic Space (Flat, -2 dB, -4 dB)
High Frequency (+/-6 dB, center 10 kHz, continuously variable)
Mid Frequency (+/-6 dB, center 1 kHz, continuously variable)
Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)

Inputs:
XLR and 1/4-inch TRS balanced rear-panel inputs
RCA unbalanced rear-panel inputs

Protection:
RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
Power Saver mode (engages after 40 minutes)

Set up your studio monitors for your room.

Erisr Studio 5 active monitors are equipped with Acoustic Tuning controls to ensure the flattest response in your mix environment. You get Low Cut, Mid, and High controls, as well as three-way Acoustic Space tuning that makes it easy to compensate for the boundary bass boost that occurs when a speaker is placed too close to a wall.

Honest. Expressive. Powerful.

Like all PreSonus studio monitors, the Eris Studio 5 offers consistent, accurate listening. Their stylish design makes them a welcome addition to any mix space and their smooth, incredibly even frequency response ensures that your mixes will sound great everywhere.

Specs

Electronics
Voltage: 220-240V UK
Wattage: 80 Watts
Input impedance: 10kO

Performance

Peak SPL: 102 dB (@ 1 meter)

Speakers
Crossover frequency: 3.5 kHz
Coverage pattern: 100 degree (H) x 60 degree (V)

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard

Audio controls: Volume High Frequency (+/-6 dB, center 10 kHz, continuously variable) Mid Frequency (+/-6 dB, center 1 kHz, continuously variable)

Audio switches: Acoustic Space (Flat, -2 dB, -4 dB) Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)

Monitor inputs: 1- Balanced XLR, 1- Balanced 14" TRS, 1- Unbalanced RCA

Power amplifier type: Class AB

Measurements

Dimensions: 11.50 x 8.00 x 8.80 in

Product depth: 8.78" (22.3 cm)
Product height: 11.5" (29.2 cm)
Product width: 8" (20.32 cm)

Notes: Part of the excellent Eris range, the Studio 8 is PreSonus's eight-inch two-way studio monitor, offering solid performance all the way down to 35 Hz and crystal clear reproduction thanks to 1.25-inch silk-dome tweeters and Elliptical Boundary Modeled waveguides.

Supplier's Notes:
With a smooth, accurate frequency response; powerful amplification with tons of headroom; and Acoustic Tuning functions that ensure you get the best sound, it's no wonder that Erisr-series studio monitors have been a runaway hit since their introduction. Building on the reputation of its award-winning predecessors, the Eris Studio 8 is a substantial update that delivers richer low-end and more controlled high-frequency response, reproducing every detail in your recordings with a natural sound unparalleled in its class.

Designed for superior performance in both home studios and professional mix rooms, the Eris Studio 8 features a custom-designed EBM (Elliptical Boundary Modeled) waveguide that provides superior high-frequency response and wide 100-degree horizontal dispersion to create a broader sweet spot. Narrow vertical dispersion reduces reflections from your desk, and a 1.25-inch, silk-dome tweeter ensures snappy, accurate transient reproduction. An elegant new enclosure design improves the waveguide performance so you'll hear the finest details in your mix.

The woven-composite, 8-inch, low-frequency driver offers Eris' signature tight, clear bass with plenty of punch. Its 140W of biamped power make the Eris Studio 5 more efficient than previous designs. The ported enclosure maximizes bass response and allows the Eris Studio 8 to reach down to an astonishing 35 Hz - with no subwoofer!

Flexible input options let you connect almost any line-level source, from mixers to audio interfaces and more. You'll have no problem hooking your Eris speakers up to virtually anything.

Features

8-inch woven composite, low-frequency transducer
1.25-inch (31.75 mm), ultra-low-mass, silk-dome, high-frequency transducer
100-(H) x 60-(V) EBM waveguide for a wide sweet spot
Front-firing acoustic port for superior bass-frequency reproduction and optimized, resonance-suppressing internal bracing
140W, Class AB bi-amplification
35 Hz to 20 kHz frequency response
106 dB SPL (Peak, @ 1 meter)
Acoustic Tuning controls: HF (i6 dB, continuously variable); Midrange (i6 dB, continuously variable), and Acoustic Space (flat, -2, -4 dB), plus highpass filter (Off, 80 Hz, 100 Hz)
RF interference, output-current limiting, over-temperature, transient, subsonic protection, and amplifier "soft start" feature (eliminates popping on power-up)
Internal power supply with IEC connector and power switch with on/off LED
Balanced XLR and 14-inch inputs and unbalanced RCA inputs

Set up your studio monitors for your room.

Erisr Studio 8 active monitors are equipped with Acoustic Tuning controls to ensure the flattest response in your mix environment. You get Low Cut, Mid, and High controls, as well as three-way Acoustic Space tuning that makes it easy to compensate for the boundary bass boost that occurs when a speaker is placed too close to a wall.

Honest. Expressive. Powerful.

Like all PreSonusr studio monitors, the Erisr Studio 8 offers consistent, accurate listening. Their stylish design makes them a welcome addition to any mix space, and their smooth, incredibly even frequency response ensures that your mixes will sound great everywhere.

Specs

Electronics
Voltage: 220-240V UK
Wattage: 80 Watts
Input impedance: 10 kO

Performance
Peak SPL: 6 dB (@ 1 meter)

Speakers
Crossover frequency: 3.5 kHz
Coverage pattern: 100 degree (H) x 60 degree (V)

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard

Audio controls: Volume High Frequency (+/-6 dB, centre 10 kHz, continuously variable) Mid Frequency (+/-6 dB, centre 1 kHz, continuously variable)

Audio switches: Acoustic Space (Flat, -2 dB, -4 dB) Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
Monitor inputs: 1- Balanced XLR, 1- Balanced 14" TRS, 1- Unbalanced RCA
Power amplifier type: Class AB

Measurements

Dimensions: 16.50 x 9.80 x 11.70 IN

Depth: 11.73" (29.8 cm)
Height: 16.5" (41.91 cm)
Width: 9.84" (25 cm)

Notes: ***B-STOCK: Without original box, product in perfect working order***


This monitor comes with free Studio One Prime and Studio Magic plug-ins.

Superior transient response:
In order to dampen resonance peaks at higher frequencies, conventional dome tweeters are injected with fluid to raise their mass, sacrificing transient response time. By contrast, the custom-designed AMT tweeter in the R80 uses an incredibly thin, folded Kapton membrane (< 0.01 mm) with an inlayed aluminum circuit functioning as the voice coil, allowing the tweeter to move at the same instant as the electric current. The resulting reactive response time provides marked clarity and superior transient reproduction.

Wide, consistent stereo image:
An unfolded AMT tweeter diaphragm provides 8 to 13 times the projection area of a traditional 1-inch dome tweeter, enabling R80 monitors to provide a much wider stereo soundstage than traditional designs. At the same time, the R80 provides a very limited vertical dispersion, which helps to reduce reflections from the ceiling and desktop that can cause phase coherence issues. Because it's less subject to room-anomaly interference, the R80 reacts predictably and sounds consistent from room to room.

Transparent sound:
The R80 utilizes an 8-inch, custom-coated, woven Kevlar low-frequency driver. This rigid cone maintains a more consistent dispersion pattern across its frequency response range. Biamped and driven by a 150W Class D amplifierimaking the R series some of the most powerful monitors in their categoryithese monitors deliver an open, clear, and less fatiguing listening experience.

Have it your way:
You can customize the R80 in several ways. It's available with black or blue faceplates to fit your studio decor. With balanced XLR, balanced 1/4" TRS, and unbalanced RCA line-level inputs, it's easy to feed audio to your R80 monitors from a mixer, an interface, a media player, or almost any other line-level source. And R series monitors offer user-adjustable contour features for optimizing the monitors for your mixing space. This enables full integration into any studio environment.

Accuracy defined:
The R80's AMT monitor design provides lifelike sonic reproduction that will allow you to hear the room in your recordings. Its transparent sound and responsive transient reproduction makes it an ideal solution for anyone who is mixing high-resolution audio. Hear the R80 at your favorite PreSonus dealer.

Notes: High-quality compact studio monitors for the uncompromising creator

HS Series speakers have become the standard in studio monitors, trusted for many years by the world's top audio engineers, producers, and artists. Now Yamaha has redefined their essence in a compact housing. The HS3 and HS4 are powerful tools to help create a wide range of audio content-from music production to video editing-that meets the expectations of creators who have limited space and need to keep the volume down but do not want to compromise on monitoring quality.

Sound that is always true to the original

The HS3 and HS4 continue the design philosophy and know-how of previous Yamaha studio monitors. No effort has been spared in the pursuit of the optimal product, and the resulting speakers comprise carefully selecting parts such as a high-performance class-D amp, a highly resilient MDF cabinet, and woofers and soft dome tweeters that deliver a sound that is faithful to the source despite their small size. They also feature proprietary "Twisted Flare Port" technology that reduces air turbulence noise in the bass reflex port, providing clear and accurate bass. That's the secret to why the HS3 and HS4 deliver outstanding resolution, sound image, and depth, with a flat response across all bandwidths without any colouring of the original sound.

Optimal sound tailored to your environment

The sound produced by speakers is sometimes affected by the surrounding environment.

The rear panels of the HS3 and HS4 are equipped with ROOM CONTROL and HIGH TRIM functions that allow you to make adjustments to achieve the ideal sound for any environment, such as reducing the unneeded, exaggerated low-end that can often occur when speakers are placed next to walls.

Inputs and controls to fit any use case

The rear panel of the HS3 and HS4 is equipped with combination XLR/TRS phone, RCA, and stereo mini connectors, allowing you to connect to a wide range of professional and consumer equipment such as computers, audio interfaces, audio mixers, and electric instruments. The most commonly used features-power button, volume knob, and headphone connector-are located in the front for easy access.

Compact and portable

The compact size of the HS3 and HS4 was made possible thanks to the highly efficient class-D amp. Using one amp for two speakers has enabled us to both reduce the weight of the speakers and simplify the cable connections. They take up little space even in a small bedroom studio, and are easy to take with you on the road.

General specifications

Speaker type: 2-way powered speaker, Bass-reflex type
Frequency response (-10dB): 70 Hz - 22 kHz
Frequency response (-3dB): 85 Hz - 20 kHz
Crossover: 3.2 kHz
Maximum Output Level (Measured peak, IEC noise@1m): 100 dB SPL
Components: HF: 0.75" Dome, LF: 3.5" Cone
Nominal impedance: 6 O
I/O connectors: [Input Connector] L Side: COMBO (XLR/TRS Phone) ×2, RCA ×2, Stereo Mini, R Side: Speaker Input; [Output Connector] L Side: Headphone, Speaker Output
Output power: 26 W + 26 W (Dynamic, RL=6 O), 20 W + 20 W (THD 0.1%, 1kHz, RL=6 O)
Input sensitivity: LINE 1 (COMBO): +4 dBu, LINE 2 (RCA, ST Mini): -10 dBu (Volume: Maximum)
Input Level: LINE 1 (COMBO): +20 dBu, LINE 2 (RCA, ST Mini): +6 dBu (Maximum Input)
Input impedance: LINE 1 (COMBO): 20 kO, LINE 2 (RCA, ST Mini): 10 kO
Controls: Front: Volume, Rear: ROOM CONTROL SWITCH (0/-2/-4 dB under 500 Hz), HIGH TRIM SWITCH (+2/0/-2 dB above 2 kHz)
Indicators: Power ON (White LED)
Power requirements: Depending on area of purchase; 100-240 V, 50/60 Hz (*)
Power consumption: 15 W
Cabinet material: MDF

Dimensions

Width: L Side: 132 mm (5.2"), R Side: 132 mm (5.2")
Height: L Side: 223 mm (8.8"), R Side: 223 mm (8.8")
Depth: Side: 189 mm (7.4"), R Side: 177 mm (7.0")

Net weight: L Side: 2.8 kg (6.2 lb), R Side: 2.1 kg (4.6 lb)

Accessories: Stereo Mini - RCA Cable 1.5 m, Speaker Cable 2.5 m, Anti Slip Pad, Quick Start Guide, Safety Guide
Packaging: Pair

* While this product will work at a voltage of between 100 V to 240 V, as limiter settings vary depending on the supply voltage, make sure to use this product at the supply voltage indicated on the rear panel of this product.

Notes: Small but serious monitors from Yamaha's wildly popular HS series. With bass all the way down to an impressively low 70 Hz, these little speakers punch above their weight.

Supplier's Notes:
High-quality compact studio monitors for the uncompromising creator

HS Series speakers have become the standard in studio monitors, trusted for many years by the world's top audio engineers, producers, and artists. Now Yamaha has redefined their essence in a compact housing. The HS3 and HS4 are powerful tools to help create a wide range of audio content-from music production to video editing-that meets the expectations of creators who have limited space and need to keep the volume down but do not want to compromise on monitoring quality.

Sound that is always true to the original

The HS3 and HS4 continue the design philosophy and know-how of previous Yamaha studio monitors. No effort has been spared in the pursuit of the optimal product, and the resulting speakers comprise carefully selecting parts such as a high-performance class-D amp, a highly resilient MDF cabinet, and woofers and soft dome tweeters that deliver a sound that is faithful to the source despite their small size. They also feature proprietary "Twisted Flare Port" technology that reduces air turbulence noise in the bass reflex port, providing clear and accurate bass. That's the secret to why the HS3 and HS4 deliver outstanding resolution, sound image, and depth, with a flat response across all bandwidths without any colouring of the original sound.

Optimal sound tailored to your environment

The sound produced by speakers is sometimes affected by the surrounding environment.

The rear panels of the HS3 and HS4 are equipped with ROOM CONTROL and HIGH TRIM functions that allow you to make adjustments to achieve the ideal sound for any environment, such as reducing the unneeded, exaggerated low-end that can often occur when speakers are placed next to walls.

Inputs and controls to fit any use case

The rear panel of the HS3 and HS4 is equipped with combination XLR/TRS phone, RCA, and stereo mini connectors, allowing you to connect to a wide range of professional and consumer equipment such as computers, audio interfaces, audio mixers, and electric instruments. The most commonly used features-power button, volume knob, and headphone connector-are located in the front for easy access.

Compact and portable

The compact size of the HS3 and HS4 was made possible thanks to the highly efficient class-D amp. Using one amp for two speakers has enabled us to both reduce the weight of the speakers and simplify the cable connections. They take up little space even in a small bedroom studio, and are easy to take with you on the road.

General specifications

Speaker type: 2-way powered speaker, Bass-reflex type
Frequency response (-10dB): 70 Hz - 22 kHz
Frequency response (-3dB): 85 Hz - 20 kHz
Crossover: 3.2 kHz
Maximum Output Level (Measured peak, IEC noise@1m): 100 dB SPL
Components: HF: 0.75" Dome, LF: 3.5" Cone
Nominal impedance: 6 O
I/O connectors: [Input Connector] L Side: COMBO (XLR/TRS Phone) ×2, RCA ×2, Stereo Mini, R Side: Speaker Input; [Output Connector] L Side: Headphone, Speaker Output
Output power: 26 W + 26 W (Dynamic, RL=6 O), 20 W + 20 W (THD 0.1%, 1kHz, RL=6 O)
Input sensitivity: LINE 1 (COMBO): +4 dBu, LINE 2 (RCA, ST Mini): -10 dBu (Volume: Maximum)
Input Level: LINE 1 (COMBO): +20 dBu, LINE 2 (RCA, ST Mini): +6 dBu (Maximum Input)
Input impedance: LINE 1 (COMBO): 20 kO, LINE 2 (RCA, ST Mini): 10 kO
Controls: Front: Volume, Rear: ROOM CONTROL SWITCH (0/-2/-4 dB under 500 Hz), HIGH TRIM SWITCH (+2/0/-2 dB above 2 kHz)
Indicators: Power ON (White LED)
Power requirements: Depending on area of purchase; 100-240 V, 50/60 Hz (*)
Power consumption: 15 W
Cabinet material: MDF

Dimensions

Width: L Side: 132 mm (5.2"), R Side: 132 mm (5.2")
Height: L Side: 223 mm (8.8"), R Side: 223 mm (8.8")
Depth: Side: 189 mm (7.4"), R Side: 177 mm (7.0")

Net weight: L Side: 2.8 kg (6.2 lb), R Side: 2.1 kg (4.6 lb)

Accessories: Stereo Mini - RCA Cable 1.5 m, Speaker Cable 2.5 m, Anti Slip Pad, Quick Start Guide, Safety Guide
Packaging: Pair

* While this product will work at a voltage of between 100 V to 240 V, as limiter settings vary depending on the supply voltage, make sure to use this product at the supply voltage indicated on the rear panel of this product.

Notes: High-quality compact studio monitors for the uncompromising creator

HS Series speakers have become the standard in studio monitors, trusted for many years by the world's top audio engineers, producers, and artists. Now Yamaha has redefined their essence in a compact housing. The HS3 and HS4 are powerful tools to help create a wide range of audio content-from music production to video editing-that meets the expectations of creators who have limited space and need to keep the volume down but do not want to compromise on monitoring quality.

Sound that is always true to the original

The HS3 and HS4 continue the design philosophy and know-how of previous Yamaha studio monitors. No effort has been spared in the pursuit of the optimal product, and the resulting speakers comprise carefully selecting parts such as a high-performance class-D amp, a highly resilient MDF cabinet, and woofers and soft dome tweeters that deliver a sound that is faithful to the source despite their small size. They also feature proprietary "Twisted Flare Port" technology that reduces air turbulence noise in the bass reflex port, providing clear and accurate bass. That's the secret to why the HS3 and HS4 deliver outstanding resolution, sound image, and depth, with a flat response across all bandwidths without any colouring of the original sound.

Optimal sound tailored to your environment

The sound produced by speakers is sometimes affected by the surrounding environment.

The rear panels of the HS3 and HS4 are equipped with ROOM CONTROL and HIGH TRIM functions that allow you to make adjustments to achieve the ideal sound for any environment, such as reducing the unneeded, exaggerated low-end that can often occur when speakers are placed next to walls.

Inputs and controls to fit any use case

The rear panel of the HS3 and HS4 is equipped with combination XLR/TRS phone, RCA, and stereo mini connectors, allowing you to connect to a wide range of professional and consumer equipment such as computers, audio interfaces, audio mixers, and electric instruments. The most commonly used features-power button, volume knob, and headphone connector-are located in the front for easy access.

Compact and portable

The compact size of the HS3 and HS4 was made possible thanks to the highly efficient class-D amp. Using one amp for two speakers has enabled us to both reduce the weight of the speakers and simplify the cable connections. They take up little space even in a small bedroom studio, and are easy to take with you on the road.

General specifications

Speaker type: 2-way powered speaker, Bass-reflex type
Frequency response (-10dB): 60 Hz - 22 kHz
Frequency response (-3dB): 83 Hz - 20 kHz
Crossover: 2.3 kHz
Maximum Output Level (Measured peak, IEC noise@1m): 102 dB SPL
Components: HF: " Dome, LF: 4.5" Cone
Nominal impedance: 6 O
I/O connectors: [Input Connector] L Side: COMBO (XLR/TRS Phone) ×2, RCA ×2, Stereo Mini, R Side: Speaker Input; [Output Connector] L Side: Headphone, Speaker Output
Output power: 26 W + 26 W (Dynamic, RL=6 O), 20 W + 20 W (THD 0.1%, 1kHz, RL=6 O)
Input sensitivity: LINE 1 (COMBO): +4 dBu, LINE 2 (RCA, ST Mini): -10 dBu (Volume: Maximum)
Input Level: LINE 1 (COMBO): +20 dBu, LINE 2 (RCA, ST Mini): +6 dBu (Maximum Input)
Input impedance: LINE 1 (COMBO): 20 kO, LINE 2 (RCA, ST Mini): 10 kO
Controls: Front: Volume, Rear: ROOM CONTROL SWITCH (0/-2/-4 dB under 500 Hz), HIGH TRIM SWITCH (+2/0/-2 dB above 2 kHz)
Indicators: Power ON (White LED)
Power requirements: Depending on area of purchase; 100-240 V, 50/60 Hz (*)
Power consumption: 15 W
Cabinet material: MDF

Dimensions

Width: L Side: 150 mm (5.9"), R Side: 150 mm (5.9")
Height: L Side: 240 mm (9.4"), R Side: 240 mm (9.4")
Depth: L Side: 213 mm (8.4"), R Side: 203 mm (8.0")

Net weight: L Side: 3.7 kg (8.2 lb), R Side: 3.1 kg (6.8 lb)

Accessories: Stereo Mini - RCA Cable 1.5 m, Speaker Cable 2.5 m, Anti Slip Pad, Quick Start Guide, Safety Guide
Packaging: Pair

* While this product will work at a voltage of between 100 V to 240 V, as limiter settings vary depending on the supply voltage, make sure to use this product at the supply voltage indicated on the rear panel of this product.

Notes: Tiny but powerful studio monitors from Yamaha's hugely popular HS range. Impressive bass response all the way down to 60 Hz despite their compact dimensions. Here in their white colourway.

Supplier's Notes:
High-quality compact studio monitors for the uncompromising creator

HS Series speakers have become the standard in studio monitors, trusted for many years by the world's top audio engineers, producers, and artists. Now Yamaha has redefined their essence in a compact housing. The HS3 and HS4 are powerful tools to help create a wide range of audio content-from music production to video editing-that meets the expectations of creators who have limited space and need to keep the volume down but do not want to compromise on monitoring quality.

Sound that is always true to the original

The HS3 and HS4 continue the design philosophy and know-how of previous Yamaha studio monitors. No effort has been spared in the pursuit of the optimal product, and the resulting speakers comprise carefully selecting parts such as a high-performance class-D amp, a highly resilient MDF cabinet, and woofers and soft dome tweeters that deliver a sound that is faithful to the source despite their small size. They also feature proprietary "Twisted Flare Port" technology that reduces air turbulence noise in the bass reflex port, providing clear and accurate bass. That's the secret to why the HS3 and HS4 deliver outstanding resolution, sound image, and depth, with a flat response across all bandwidths without any colouring of the original sound.

Optimal sound tailored to your environment

The sound produced by speakers is sometimes affected by the surrounding environment.

The rear panels of the HS3 and HS4 are equipped with ROOM CONTROL and HIGH TRIM functions that allow you to make adjustments to achieve the ideal sound for any environment, such as reducing the unneeded, exaggerated low-end that can often occur when speakers are placed next to walls.

Inputs and controls to fit any use case

The rear panel of the HS3 and HS4 is equipped with combination XLR/TRS phone, RCA, and stereo mini connectors, allowing you to connect to a wide range of professional and consumer equipment such as computers, audio interfaces, audio mixers, and electric instruments. The most commonly used features-power button, volume knob, and headphone connector-are located in the front for easy access.

Compact and portable

The compact size of the HS3 and HS4 was made possible thanks to the highly efficient class-D amp. Using one amp for two speakers has enabled us to both reduce the weight of the speakers and simplify the cable connections. They take up little space even in a small bedroom studio, and are easy to take with you on the road.

General specifications

Speaker type: 2-way powered speaker, Bass-reflex type
Frequency response (-10dB): 60 Hz - 22 kHz
Frequency response (-3dB): 83 Hz - 20 kHz
Crossover: 2.3 kHz
Maximum Output Level (Measured peak, IEC noise@1m): 102 dB SPL
Components: HF: " Dome, LF: 4.5" Cone
Nominal impedance: 6 O
I/O connectors: [Input Connector] L Side: COMBO (XLR/TRS Phone) ×2, RCA ×2, Stereo Mini, R Side: Speaker Input; [Output Connector] L Side: Headphone, Speaker Output
Output power: 26 W + 26 W (Dynamic, RL=6 O), 20 W + 20 W (THD 0.1%, 1kHz, RL=6 O)
Input sensitivity: LINE 1 (COMBO): +4 dBu, LINE 2 (RCA, ST Mini): -10 dBu (Volume: Maximum)
Input Level: LINE 1 (COMBO): +20 dBu, LINE 2 (RCA, ST Mini): +6 dBu (Maximum Input)
Input impedance: LINE 1 (COMBO): 20 kO, LINE 2 (RCA, ST Mini): 10 kO
Controls: Front: Volume, Rear: ROOM CONTROL SWITCH (0/-2/-4 dB under 500 Hz), HIGH TRIM SWITCH (+2/0/-2 dB above 2 kHz)
Indicators: Power ON (White LED)
Power requirements: Depending on area of purchase; 100-240 V, 50/60 Hz (*)
Power consumption: 15 W
Cabinet material: MDF

Dimensions

Width: L Side: 150 mm (5.9"), R Side: 150 mm (5.9")
Height: L Side: 240 mm (9.4"), R Side: 240 mm (9.4")
Depth: L Side: 213 mm (8.4"), R Side: 203 mm (8.0")

Net weight: L Side: 3.7 kg (8.2 lb), R Side: 3.1 kg (6.8 lb)

Accessories: Stereo Mini - RCA Cable 1.5 m, Speaker Cable 2.5 m, Anti Slip Pad, Quick Start Guide, Safety Guide
Packaging: Pair

* While this product will work at a voltage of between 100 V to 240 V, as limiter settings vary depending on the supply voltage, make sure to use this product at the supply voltage indicated on the rear panel of this product.

Notes: ***B-STOCK: Box opened/damaged, but product is in excellent condition and in perfect working order***


Loosely inspired by the look of the classic NS10 studio monitors, Yamaha's HS range offers much more modern sound. Punchy low end and clear highs from this 6.5-inch model.

Supplier's notes:
This second generation of 'HS' nearfield reference monitors, like their predecessors, share the same design philosophy as the legendary NS-10M studio monitors - Providing accurate signal reproduction and superior sonic performance.

The Yamaha HS7 employ a new, highly efficient tweeter providing an extended high frequency range up to 30KHz. The matching HS8S 150W powered subwoofer provides an extend bass when a well defined bottom end is required.

A low resonance enclosure built using a three way mitre joint technique ensures that the corners of the speaker are firmly anchored leading to dramatically improved durability and the elimination of unwanted resonances that can colour the original sound. Yamaha's 'Vortex Sound Control' technology is deployed to decrease unwanted airflows around the speaker ports. This in turn reduces audible noise by up to 6dB.

Product video: http://www.youtube.com/watch?feature=player_embedded&v=Dvj3StP4fVE