100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth accessories

Inicio  Equipment  

Synth accessories

Options
Artículos del 1 al 8 de 8 en la página 1 de 1
Subscribe to our weekly Studio Equipment emails
Synths & Wood Oak Veneered End Cheeks Dual Stand For Waldorf Blofeld & Pulse 2 Synthesiser
Cat: 674333 Rel: 15 Jan 18
 
Oak veneered dual synthesiser stand
Notes: Waldorf Blofeld and Pulse 2 oak veneered stand. This new version has been precision machined to ensure a quality fit and finish. Holding 2 Waldorf synths, the stand not only gives a much better working angle but also helps free up much needed space in your studio. The design leaves plenty of room for all cables to be easily attached or removed.

The synths fit snuggly into the recesses on the stand and is then secured using the supplied confirmat screws. Allen key and rubber feet also included.
Read more
 1 in stock $54.36
Click for better price!
or call +44 20 7424 1960
quote 674333
Synths & Wood Oak Veneered End Cheeks Triple Stand For Roland Boutique Series Synthesiser
Cat: 672209 Rel: 30 Nov 17
 
Oak veneered Roland Boutique custom made stand/end cheeks for the JX03, JP08, JU06, SE02, TR09, TB03, TR08 etc
Notes: This new version holds 3 Roland Boutique synths. This will also fit the TR09, TR08, SE02. SH01a and TB03 etc (you will need to remove them from the additional case that they come with).

The stand has been made from oak veneered MDF wood and is connected via 12x allen head Confirmat screws (key and screws provided) into an MDF wooden bar. These are a great addition to the Boutique synths and give a much nicer look and better working angle.

The Boutique synths are gripped in place by the sides of the stand, so do not fully tighten screws until units are placed inside. Make sure you do this on a flat surface to ensure the feet are correctly aligned.

The stand will need assembly as they will be sent flat packed - all screws, tools and rubber feet are provided.
Read more
 3 in stock $54.36
Click for better price!
or call +44 20 7424 1960
quote 672209
Synths & Wood Plain MDF Recessed End Cheeks Triple Stand For Roland Boutique Series Synthesiser
Cat: 719539 Rel: 13 Feb 19
 
Custom made recessed stand/end cheeks for the JX03, JP08, JU06, SE02, TR09, TB03, TR08 etc
Notes: Holds 3 Roland Boutique synths, precision machined with a CNC Router so the boutiques lock firmly in place. Will fit all the Roland Boutiques - however, you will need to remove them from the additional case (DK01).

The stand has been made from MDF wood and is connected via 8 x Allen head Confirmat screws (Allen key & screws provided) into an MDF wooden bar. These are a great addition to the Boutique synths and give a much nicer look and better working angle.
Read more
 2 in stock $61.02
Click for better price!
or call +44 20 7424 1960
quote 719539
Synths & Wood Solid Oak End Cheeks Dual Angle Stand For Novation Peak Synthesiser
Cat: 728392 Rel: 24 Apr 19
 
Dual angle stand for the Novation Peak, precision machined from high quality oak
Notes: This stand has been precision machined and hand finished. You have the option of 2 different working angles, with a raise at the front so it can be placed behind a keyboard.

The stand is assembled using the existing screws. 4 small magnets are also provided to go over the screws, so you can use the logo that comes with the synth.

Item will need assembly as they are sent flat packed, all screws and rubber feet provided.
Read more
 2 in stock $67.68
Click for better price!
or call +44 20 7424 1960
quote 728392
Synths & Wood Solid Oak End Cheeks Dual Stand For Korg Volca Series Synthesiser
Cat: 672216 Rel: 30 Nov 17
 
Custom made Korg Volca stand/end cheeks
Notes: This version holds 2 Korg Volcas, which is ideal if you have the full range of Volcas as 2 stands can be put side by side to create a rack of four. The stand has been made from solid oak wood and is connected via 8x allen head Confirmat screws (key and screws provided) into an MDF wood bar. These are a great addition to the Volcas and give a much nicer look and working angle. You can also flip them round to have a much steeper angle if you prefer.

The stand will need assembly as it will be sent flat packed - all screws are provided.

Due to the nature of the material when assembling the stand the braces may split - this is perfectly normal and the stand will function as it should.
Read more
 1 in stock $51.03
Click for better price!
or call +44 20 7424 1960
quote 672216
Synths & Wood Solid Oak End Cheeks Dual Stand Mk2 For Roland Boutique Series
Cat: 719555 Rel: 14 Feb 19
 
Custom made solid oak Roland Boutique stand/end cheeks
Notes: This stand holds 2 Boutique synths. It has been made from solid oak wood and is connected via 8 x Allen head Confirmat screws (Allen key & screws provided) into an MDF wood bar.

A great addition to the Roland range of synths, giving a much nicer look and working angle, plus now with more space for cables.

Read more
 1 in stock $54.36
Click for better price!
or call +44 20 7424 1960
quote 719555
Synths & Wood Solid Oak End Cheeks Stand For Roland System 8 Synthesiser
Cat: 719534 Rel: 13 Feb 19
 
Custom made wooden end cheeks for Roland System 8
Notes: These end cheeks have been hand crafted from Solid Oak to give your System 8 a much nicer look.

The cheeks attach using the existing screws from the System 8 and takes a few minutes to add a touch of class to your synth.
Read more
 1 in stock $52.14
Click for better price!
or call +44 20 7424 1960
quote 719534
Synths & Wood Solid Oak End Cheeks Stand For Roland TR8 & MX1
Cat: 672211 Rel: 30 Nov 17
 
Roland Aira TR8 drum machine custom end panels
Notes: Custom built solid oak end cheeks for your drum machine.

This stand has been hand crafted from solid oak to give your drum machine a much nicer working angle.

The stand is assembled by connecting the side panels with 4x confirmat screws. Comes with fixings and an allen key to assemble your stand ready for use.

Item will need assembly as they are sent flat packed, all screws and tools are provided, this includes small rubber feet.
Read more
 2 in stock $51.03
Click for better price!
or call +44 20 7424 1960
quote 672211
Artículos del 1 al 8 de 8 en la página 1 de 1

Filter

Synth accessories
Accesorios
Release Date
Featured
Close