100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

Inicio  Equipment  

Synth modules

Options
Artículos del 1 al 21 de 21 en la página 1 de 1
Subscribe to our weekly Studio Equipment emails
Michigan Synth Works 2HP2CV USB to CV Adapter Module (black faceplate)
Cat: 802356 Rel: 07 Jan 21
 
USB to CV adapter module
Notes: 2HP adaptation of Mutable Instruments CVpal

Width: 2HP

MINI USB connection

LED indicators for Gate activity

Depth: 17mm

Fully Calibrated
Read more
MRP:$72.02 SAVE 15%
 1 in stock $61.14
Click for better price!
or call +44 20 7424 1960
quote 802356
Michigan Synth Works Beehive Module (black faceplate)
Cat: 802188 Rel: 07 Jan 21
 
Micro module
Notes: 8HP micro module based on Opensource Plaits.

Stock Plaits firmware
Read more
MRP:$231.01 SAVE 15%
 1 in stock $197.04
Click for better price!
or call +44 20 7424 1960
quote 802188
Michigan Synth Works BLN Audio Level Converter Module (black faceplate)
Cat: 802359 Rel: 07 Jan 21
 
Audio level converter module
Notes: BLN is a 4 channel audio level converter designed to interface line or "pro" audio levels to modular audio levels. It features 2 independent converters with 2 channels each.

Converter 1: Line level/Balanced to Modular Level

The inputs for the top converter are for converting -10dB or +4dB signal levels (balanced or unbalanced) to +/-5V modular levels. Each channel can be set individually for +4 or -10 using channel 1 and 2 of the DIP switched

Converter 2: Modular level to Balanced Lined

The inputs for the bottom to converters accept a +/-5V modular audio level and converts them to a BALANCED +4 dB or -10 dB audio level. Each channel can be set individually for +4 or -10 using channel 3 and 4 of the DIP switched.

For balanced signals, simply use a 3.5mm TRS to 1/4" TRS Cable or 3.5mm TRS to 3.5mm TRS cable with a 1/4" TRS adapter. Unbalanced signals should use a 3.5mm TS cable

2HP Width, 32mm Depth

Current Draw: 12/14 mA +12/-12

Please note: This devices uses a polarized power cable, please make sure the red stripe corresponds to the white stripe on the board
Read more
MRP:$107.35 SAVE 25%
 1 in stock $80.39
Click for better price!
or call +44 20 7424 1960
quote 802359
Michigan Synth Works F8R 8 Channel Fader Bank Module (black faceplate)
Cat: 802345 Rel: 06 Jan 21
 
8-channel fader bank module
Notes: F8R is a 8 channel, 16hp control surface for Eurorack

16HP Width, 20mm Depth
Current Draw: +12V 50 mA, -12V 40 mA

Basic Usage instructions:

Front:

Voltage Select switches: Independent for each channel. Does NOT affect MIDI/I2C data

Slider LED color: To change the LED color, simply remove the cap and rotate the square LED 180s. Do NOT force the LED back in, it should slide in easily, may require wiggling.

Rear:

Power Header: Standard 10pin power cable, there is NO polarity for this connection. It can be connected either way

MIDI Out Header: This is a 4 pin header but only 3 or 2 connections need to be used. To connect to a DIN cable, either GND, 5 (to pin 5, current sink/aka -), and 4 (to pin 4, current source/aka +) should be used. For internal module to module connections, only pin 4 and 5 should be used. The ground pin is only for the shield in a midi cable, it is never connected on a midi input and isnt necessary for the short module to module lengths

I2C Header: 3 pin header to connect to other I2C devices in your rack, this is an unbuffered connection so cable lengths should be as short as possible (20cm/6" recommended). There are 4.7k pull up resistors on this connection

Module Orientation jumpers: There are 3 of these jumpers which determine how the module operates depending on if the jacks are on top or bottom. They will come installed in the position matching your panel but can be changed should you want to flip it. "INV" is Jacks on Top, the white position is jacks on bottom. Changing these jumpers will change the numbering of the faders from left to right (1->8) in both MIDI and I2C and will invert the voltage response (i.e. 10->0V from top to bottom). The jumper is shown in the "jacks on top" position in the pic below. ALL THREE JUMPERS MUST BE IN THE SAME POSITION for the module to operate correctly.

Module Config DIP switch: This allows you to switch between I2C Follower and I2C Leader modes easily. Simply move the switch to the "lead" position and restart the module (you can press the blue reset button once). The other 3 positions are for future expansion and not currently implemented.

Connector for Expander: This connects the F8R to the I/O expander. The cable is attached to the expander. Note the keyway at the top of the part, the connecter will ONLY connect one way
Read more
MRP:$285.37 SAVE 34%
 5 in stock $187.98
Click for better price!
or call +44 20 7424 1960
quote 802345
Michigan Synth Works F8R Output Expander Module (black faceplate)
Michigan Synth Works F8R Output Expander Module (black faceplate) (controller/expander/MIDI/multiple synth module)
Cat: 802350 Rel: 07 Jan 21
 
Output expander module
Notes: F8R Output Expander adds 3 TRS midi outputs (multiples of the MIDI out of the 8m), 3 fully buffered I2C TRS headers, and an optional 1x3 TRS Through.

I2C:

The 3 I2C outputs are fully buffered and allow for very long connections to other devices. They are all multiples of the I2C output of the 8m.

MIDI:

MIDI Out: Single Output from 8m. If nothing is plugged into this jack, the MIDI data is forwarded to the 1x3 MIDI through.

MIDI IN: MIDI input to the 1x3 MIDI through, connecting an input will disconnect the MIDI out from the 8m. This input can accept TRS MIDI A or B cables

Multiple MIDI Outs: Fully buffered midi outs

2HP Width, 22mm Depth, TRS MIDI TYPE A outputs

Current Draw: N/A, Connects to 8m
Read more
MRP:$72.02 SAVE 15%
 1 in stock $61.15
Click for better price!
or call +44 20 7424 1960
quote 802350
Michigan Synth Works mBrane Module (black faceplate)
Cat: 802190 Rel: 07 Jan 21
 
4-channel MIDI to CV interface module
Notes: mBrane is a 4 channel midi to CV interface based on opensource Yarns. The device includes a 1.5m 3.5mm TRS to Midi male cable (Type B). This is the brand new Rev1.1 of the device which now features PSImidi which allows ANY type of TRS midi cable to be used on the input. Type A or B, male or female, all will work.

Running firmware 1.5
Multichannel MIDI to CV/Gate conversion

Yarns is a MIDI interface providing up to 4 channels of very accurate CV/Gate conversion, which can be assigned to up to 4 voices.

In single voice mode, note, velocity, modulation and aftertouch (or other CC) CV are produced, along with a gate, a trigger, and a clock/reset output.

In two voices mode, two channels of note, modulation or aftertouch CV are produced, along with two gates, and clock/reset outputs.

Finally, in four voices mode, four pairs of CV/Gate outputs are provided.

Each voice has a built-in digital LFO to interpret modulation wheel messages as a vibrato; can respond to pitch-bend messages; or can be smoothed with a glide/portamento control - no need for a dedicated module and patches to get the right response from a MIDI keyboard!

Monophonic and polyphonic

The 2 and 4-voice modes are available both in a "polyphonic" and "multitimbral" flavour. The former receives chords from one single MIDI channel and dispatches them to the voices; while the later provides independent monophonic parts - which can be addressed to different MIDI channels, keyboard ranges, or even velocity levels.

Various note priority modes (low, high, last) and polyphonic allocation schemes (voice-stealing, random, cyclic) allows you to fine-tune the CV/Gate conversion to your playing style.

With sequencing and note transformation...

Each part can generate sequences either through an arpeggiator/euclidean sequencer combo; or with a SH-101 style sequencer with step-by-step recording, storing up to 64 notes. The module can sync to an external MIDI clock, and generate a clock/reset output at any subdivisions of the MIDI clock.

...and even more advanced features.

Other unique features include support for microtunings (either through standard MIDI messages or from a selection of historical tunings or indian ragas), just intonation, and an audio output mode which can transform one, two, or four of the CV outputs into simple digital oscillators.
Read more
MRP:$231.01 SAVE 23%
 1 in stock $177.78
Click for better price!
or call +44 20 7424 1960
quote 802190
Michigan Synth Works MicroTemps Utile Module (black faceplate)
Michigan Synth Works MicroTemps Utile Module (black faceplate) (clock generator/digital/sequencer synth module)
Cat: 802195 Rel: 07 Jan 21
 
Clock generator module
Notes: 6 x clock generator

Hardware basics, in brief:

teensy 3.1/3.2 @ 120MHz, w/ 128x64 OLED
trigger-to-output latency < 100us.
2 clock inputs (> 100k input impedance; threshold ~ 2.5V)
4 CV inputs (100k input impedance, -/+ 5V, assignable to (almost) any parameter)
6 clock outputs (5 digital, 1 DAC (12 bit): 10V (GPIO), -/+ 6V (DAC))
two encoders w/ switches; 2 tactile buttons.
14HP, ~ 25 mm Depth

Firmware:

7 modes, selectable per channel:
trigger sequencer/sequence editor
clock division/multiplication
LFSR
random w/ threshold
euclidian
logic (AND, OR, XOR, NAND, NOR, XNOR)
burst
DAC (channel #4 only): random, binary, "Turing", logistic, sequencer/arpeggiator
Read more
MRP:$210.63 SAVE 22%
 1 in stock $164.20
Click for better price!
or call +44 20 7424 1960
quote 802195
Michigan Synth Works MicroTest 12HP Module Tester (black faceplate)
Cat: 802226 Rel: 07 Jan 21
 
Eurorack module tester
Notes: Introducing MicroTest, a eurorack adaptation of the MI module Tester.

Read more
MRP:$250.04 SAVE 34%
 1 in stock $164.20
Click for better price!
or call +44 20 7424 1960
quote 802226
Michigan Synth Works nRings Module (black faceplate)
Michigan Synth Works nRings Module (black faceplate) (external/filter/oscillator synth module)
Cat: 802165 Rel: 07 Jan 21
 
Micro module
Notes: 6HP Micromodule of Opensource Rings
Read more
MRP:$231.01 SAVE 13%
 1 in stock $201.57
Click for better price!
or call +44 20 7424 1960
quote 802165
Michigan Synth Works Plancks II Module (black faceplate)
Michigan Synth Works Plancks II Module (black faceplate) (attenuator/CV modulation/quad/sequencer/VCA synth module)
Cat: 802186 Rel: 07 Jan 21
 
Mixer/keyframer module
Notes: 8HP Micromodule based on Opensource Frames.

This devices comes with Parasites 1.1 firmware
Read more
MRP:$231.01 SAVE 13%
 1 in stock $201.57
Click for better price!
or call +44 20 7424 1960
quote 802186
Michigan Synth Works SY0.5 Analogue Drum Module (black faceplate)
Cat: 802343 Rel: 06 Jan 21
 
Analogue drum module
Notes: Based on the circuits of the classic Pearl Syncussion SY-1, the SY0.5 is a single-channel analogue drum synth module with a distinctive retro sound. Plenty of CV control and sound-shaping options.

Supplier's Notes:
A faithful 1:1 recreation of a single channel of the Pearl Syncussion SY-1. The circuit uses all modern versions of original parts (all the opamps are still in production!) and equivalent parts for out of production parts.

10 HP, 20mm Deep

Current Draw: +12V 130 mA, -12V 20 mA

Output at eurorack levels

CV modulation of Decay Time

CV modulation of Filter Cutoff

CV Modulation of OSC pitch

CV input range +/-10V

Instructions:

Mode functionlity: There are two options for mode, one will advance the osc mode with a trigger in the direction it was last selected manually (up or down) or you can select the mode with a CV, 0-5V. You can toggle between these functions by long pressing both buttons

Power header orientation: This the PSIpower scheme so there is no polarity on the power header, either way is fine.


Read more
 1 in stock $337.46
Click for better price!
or call +44 20 7424 1960
quote 802343
Michigan Synth Works Threshold Module (black faceplate)
Michigan Synth Works Threshold Module (black faceplate) (oscillator/quad/synth voice module)
Cat: 802202 Rel: 07 Jan 21
 
Audio generator module with MIDI fuctionality
Notes: 10HP Edges Clone with integrated midi interface and PSImidi which allows any TRS midi cable to be used.

MIDI Functionality:

MIDI Learn: Press this button and send a midi note. The device will use that channel as the base channel

MIDI Mode: This button cycles between two operational modes.

1. 4 single voices trigger on 4 midi channels starting on the base MIDI channel (i.e. base channel is channel 2 so the voices are mapped over channels 2, 3, 4, 5)

2. Simple Poly mode where each voice plays on a different note on the same midi channel

Note about MIDI and Gating: The gate is normalled OPEN by the Gate 1 input. This is by design but will also force the gate open when the device is triggered by midi. Placing a dummy jack will break the open normal the gate will trigger via MIDI normally

Read more
MRP:$210.63 SAVE 22%
 1 in stock $164.20
Click for better price!
or call +44 20 7424 1960
quote 802202
Michigan Synth Works Twiigs Quad Bernoulli Gate Module (black faceplate)
Cat: 802372 Rel: 07 Jan 21
 
Signal input module
Notes: This is 2 x opensource branches. The input of channel one is normalled to all other inputs so you can run this as 1 to 4, 2x 1 to 2, etc. Dual Color LEDs on sliders
Read more
MRP:$250.04 SAVE 30%
 1 in stock $175.52
Click for better price!
or call +44 20 7424 1960
quote 802372
Michigan Synth Works uBraids II Module (black faceplate)
Cat: 802178 Rel: 06 Jan 21
 
Macro-oscillator module
Notes: Remix the remix! Back to the segment display, added Modulation LEDs for Timbre and color.
Read more
MRP:$231.01 SAVE 13%
 2 in stock $201.57
Click for better price!
or call +44 20 7424 1960
quote 802178
Michigan Synth Works uGrids Module (black faceplate)
Cat: 802164 Rel: 07 Jan 21
 
Drum pattern sequencer module
Notes: 8HP Micromodule of Opensource Grids
Read more
MRP:$210.63 SAVE 17%
 2 in stock $175.52
Click for better price!
or call +44 20 7424 1960
quote 802164
Michigan Synth Works USB2MIDI 5 Port TRS MIDI Output Module (black faceplate)
Cat: 802353 Rel: 07 Jan 21
 
TRS MIDI output module
Notes: This device provides 5 TRS MIDI out ports in a slim 2HP package.

5 MIDI OUT (only) ports, 16 channels per port

25mm depth

3 Aux headers for internal MIDI connections (ports 1-3)

TYPE A TRS MIDI Standard

Solid Ploytec GM5 technology

Class compliant USB
Read more
MRP:$107.35 SAVE 18%
 1 in stock $88.33
Click for better price!
or call +44 20 7424 1960
quote 802353
Michigan Synth Works uTides Version 2 Module (with LED Pots) (black faceplate)
Cat: 802222 Rel: 07 Jan 21
 
Clock generator/digital/envelope generator/frequency divider/function generator/LFO/oscillator synth module
Notes: 8HP Tides version 2

Fully calibrated.

With LED Pots for the attenuverters.
Read more
MRP:$222.86 SAVE 22%
 1 in stock $173.25
Click for better price!
or call +44 20 7424 1960
quote 802222
Michigan Synth Works XVI 16-Channel Fader Bank Module (black faceplate)
Cat: 802361 Rel: 06 Jan 21
 
16-channel fader bank module
Notes: XVI is a 16 channel, 44hp control surface for Eurorack
Read more
MRP:$364.19 SAVE 34%
 3 in stock $238.94
Click for better price!
or call +44 20 7424 1960
quote 802361
Neutron Sound QAT Quad Attenuverter Module (black faceplate)
Neutron Sound QAT Quad Attenuverter Module (black faceplate) (attenuator/CV modulation/mixer/utility synth module)
Cat: 802483 Rel: 07 Jan 21
 
Quad attenuverter module
Notes: Neutron QAT is a 8HP, 4 channel attenuverter with switchable linear or audio taper potentiometer response. individual,pre and post attenverter mix outputs are available. Red/Green LEDs.
Read more
MRP:$142.68 SAVE 34%
 1 in stock $93.98
Click for better price!
or call +44 20 7424 1960
quote 802483
Neutron Sound QMIX Quad Mixer (black faceplate)
Cat: 802487 Rel: 06 Jan 21
 
4-channel mixer module
Notes: Simple, effective and keenly priced quad mixer with aux outputs which can be routed pre- or post-fader. Can be chained to additional QMIX modules to increase channel count.

Supplier's Notes:
Neutron QMIX is an 8HP 4 channel mixer which can be expanded with internal jumpers and additional QMIX modules. The device has 2 mix outs and 2 AUX outs. The AUX out can be mixed from pre or post fader. LED sliders available in Red or Green. LEDs on the sliders show the input signal level (not the mix level).
Read more
MRP:$142.68 SAVE 34%
 2 in stock $93.98
Click for better price!
or call +44 20 7424 1960
quote 802487
Neutron Sound QVCA Quad VCA Module (black faceplate)
Cat: 802489 Rel: 07 Jan 21
 
Quad VCA module
Notes: Neutron QVCA is an 8HP, 2164 based channel VCA with switchable linear or log response.The audio and CV inputs are chain normalized from 1 to 4. Red LEDs. DC Coupled inputs.
Read more
MRP:$229.65 SAVE 34%
 1 in stock $150.61
Click for better price!
or call +44 20 7424 1960
quote 802489
Artículos del 1 al 21 de 21 en la página 1 de 1

Filter

Synth modules
Accesorios
Release Date
Featured
Close