100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

View:
Options
Artículos del 1 al 31 de 31 en la página 1 de 1
Subscribe to our weekly Studio Equipment emails
2hp
Cat: 727385 Rel: 02 Oct 19
 
High fidelity audio processor focused on granular synthesis
Notes: 2hp Grain is a high-fidelity audio processor focused on granular synthesis. It's capable of generating granular clouds, microsound phrases, and unique textures that are derived from any input signal. The Density control sets the rate of granularization applied to the input signal and sets its position within the buffer. The Mix control sets the balance between live input and the granular audio stream for dialling in the perfect combination of sounds. In addition, there is a frequency control and associated v/oct input allowing for pitch accurate sequencing of grains. Particle patching has never been smaller with Grain.
Read more
 1 in stock $157.58
Click for better price!
quote 727385
Cat: 717580 Rel: 06 Feb 19
 
Four channel stereo mixer with line-level, modular-level & headphone outs
Notes: The Listen Four is a four channel stereo mixer with line, modular, and headphone outputs. Two mono channels with Pan knobs and two stereo channels with dual inputs provide optimal compatibility with both stereo and mono signals. The Listen Four can be daisy-chained to other Listen modules to create a larger mixer with sub-mix outputs.
Read more
 2 in stock $191.05
Click for better price!
quote 717580
Cat: 717581 Rel: 06 Feb 19
 
Four channel stereo mixer with balanced 1/4-inch & headphone out - 12HP
Notes: The Listen Four Quarters is a four channel stereo mixer with 1/4" (6.35mm) TRS balanced outputs and 1/8" (3.5mm) headphones output. Two mono channels with Pan knobs and two stereo channels with dual inputs provide optimal compatibility with both stereo and mono signals. The Listen Four Quarters can be daisy-chained to other Listen modules to create a larger mixer with sub-mix outputs.
Read more
 1 in stock $182.41
Cat: 708115 Rel: 22 Jan 19
 
MiniMod Glide + Noise, combining two Minimoog circuits in one module - 6HP
Notes: The original MiniMod Glide +Noise module was based exactly on the original Minimoog Model D circuitry, which was designed to be used with the built in Model D keyboard, and because of its vintage design its range was severely limited to 5 or 6 octaves, and it also responded to positive voltages only. Another limitation was that it would not return fully to zero when selecting long glide times, which restricted the range even more.

So we made the decision to re-design the MiniMod Glide + Noise using modern precision parts, and we have come up with an all new circuit which has exactly the same function, but with a hugely extended range. It has the same Glide slope characteristic (a slightly curved Linear Glide) as the Model D on which the MiniMod is based, however in response to many requests from customers we have adjusted the glide up and down speeds so that they are now very similar , which is much more useful in real world applications that the earlier MK1 version which (like the Model D) would glide up considerably faster than it would glide down.

The new Mk2 MiniMod Glide Noise module now has an impressive 14 octave range, and can respond to negative voltages down to -5V. This is a very useful feature, as our MiniMod VCO's will respond to negative control voltages and produce correspondingly low frequencies; so it is now possible to glide down quickly or slowly to crazy sub bass levels! The hold feature has been improved too, it covers the full audio range as well as DC control voltages, and works as a track and hold module with Eurorack signal levels.

A further enhancement is that the Mk2 module can now (using selectable jumpers) transmit or receive pitch CV to the Eurorack power bus; for example, the Glide CV Output can now be directed to the Bus in order to send CV's to (for example) three VCO's via the bus without the need for a passive multi and four patch cords!

The Noise section of the module is unchanged, except that we have slightly boosted the level of the Red Noise output to bring it more in line with Eurorack control voltage levels.

Lastly, it is much shallower - Mk1 Glide Noise had a depth of 54mm, and it was the only MiniMod module that was too deep to fit a skiff style case - and this prevented a full MiniMod system being installed into a shallow Eurorack case. The new MK2 version is only 28mm deep, so this allows both it and a full MiniMod system to be mounted into shallow skiff style Eurorack cases.

Dimensions: 6HP wide, 26mm Deep
Current draw: 36mA Positive, 38mA Negative
Read more
 1 in stock $183.49
Click for better price!
quote 708115
Cat: 714519 Rel: 25 Jan 19
 
Gritty sounding delay effect with open feedback path - 10HP
Notes: The Coma Reactor module from Animal Factory Amplification is an innovative delay with a variety of sonic possibilities.

It is based on a PT2399 delay chip and offers amazing routing and sound design options.

The Coma knob is an attenuator for the input signal. Low levels can generate funny noises. The input signal is mirrored at the Thru output, for further processing with another module.

There are separate dry and wet potentiometers to adjust the desired effect amount.

The delay time ranges from 30 to 2000 ms. It can be controlled manually via the Time knob or with control voltage thanks to the MOD input, which is equipped with an attenuverter and a switch for setting the amount of modulation. Furthermore there is a LED which indicates the CV polarity.

The delay features a feedback knob for controlling the repeats. Turned fully clockwise it will bring up self-oscillation.

Thanks to an integrated send/return path it is possible to use the module with external effects. The volume of the external effect is controlled by the Return potentiometer. If nothing is connected to send/return, the delay signal is routed internally through a crude twin-T Bandpass Filter. The effected signal can be fed back into the delay circuit thanks to a dedicated Return Feedback knob.
Read more
 2 in stock $173.78
Click for better price!
quote 714519
Cat: 711948 Rel: 10 Jan 19
 
Compact four-channel morphing vector mixer & quadraphonic panner for modular setups - 6HP
Notes: The V3KT is a 6HP, 4-channel morphing vector mixer/quadraphonic panner with dedicated CV logic outs!

V3KT makes it very easy to animate vector mixes/synthesis, dynamic quadraphonic panning, or automate distribution of a signal through quad high-quality VCA channels. With easy operation and dedicated CV logic outs that can be fed back into your patch, it is truly an instantly inspirational piece of kit!
Read more
 1 in stock $194.28
Click for better price!
quote 711948
Cat: 728707 Rel: 24 Jul 19
 
Ring modulator based on the ARP 2600's 4014 ring mod - 8HP
Notes: Mobula is Delta Sound Labs' faithful take on the classic ARP 2600 ring modulator model 4014. This particular processor is renowned the world over for its clean sounding ring modulation effect. Due to its unconventional circuit design, where the positive and negative parts of the signal split between two two-quadrant multipliers, it achieves what is referred to as a four quadrant multiplication.

Built with a combination of modern closely matched and discrete transistors this super skiff friendly module is faithful to all of the original features, with the single addition of independent switching of input signal DC-blocking. This module is DC-coupled; meaning it will happily process both control voltages and audio signals at the flick of a switch. The unique electronic architecture leads to both significantly increased low frequency response and superior carrier suppression when compared to traditional transformer based ring modulation designs.
Read more
 1 in stock $160.82
Click for better price!
quote 728707
Cat: 734880 Rel: 10 Jul 19
 
Envelope module with two ADSR voltage controlled enevelope generators - 8HP
Notes: The module contains two ADSR type voltage controlled envelope generators with exponential curve shapes (charge/discharge curves of a capacitor) behind a front panel with 8 HP only.

Each ADSR provides these controls and in/outputs:

- LED (displays the envelope output)
- A: manual Attack control
- D: manual Decay control
- S: manual Sustain control
- R: manual Release control
- Gate Input
- Retrigger Input
- CVT Input with attenuator (CVT = CV Time)
- Envelope Output 1
- Envelope Output 2

The output voltage range for each envelope is 0 - 10V (10V = attack peak).

The time range of Attack/Decay/Release is about 1ms to 30s.

By means of internal jumpers one can select which time parameters are controlled by the CVT input (e.g. D only or D+R or A+D+R) and in which direction (i.e. if an increasing CVT shortens or stretches the time parameter in question).

Socket CVT can be normalled to an internal fixed voltage (i.e. the switching contact is connected to an internal fixed voltage). That way it's possible to change all time parameters simultaneously by means of the CVT control.

Another jumper is used to set output 2 to normal or inverted envelope.

And another jumper is used for the normalling of Gate 2 to Gate 1 (i.e. ADSR#2 is also triggered by Gate 1).

Two more jumpers are used for the optional bus access to the gate signal of the bus for each ADSR.
Read more
 3 in stock $152.97
Click for better price!
quote 734880
Cat: 738634 Rel: 09 Jul 19
 
Quad AD-generator with four independent Attack-Decay envelopes - 28HP
Notes: Module A-143-1 is a complex envelope generator that consists of Attack/Decay generators. For the complex envelope generator the four units are daisy-chained, i.e. the preceding unit triggers the following unit. The four units can be used even as four separate AD generators (switch position AD) or AD-type LFOs (switch position).

Details: Module A-143-1 contains four separate attack/decay type envelope generators. Each unit can be switched into a free running mode (LFO mode). The LFO mode differs in several points from a regular LFO (like A-145, A-146 or A-147): The slopes are exponential - in contrast to linear slopes of a normal LFO, and the frequency is defined by both controls. The attack control defines the time of the rising slope, the decay control the falling slope.

Each unit has available a comparator that compares the AD output voltage with a manually adjustable threshold and switches the corresponding comparator output (Cp 1...4) to "high" as soon as the AD output voltage goes in the decay phase below this value. The comparator output is normalled to the trigger input of the next stage via the switching contact of the trigger input socket. Consequently the first unit triggers the second, the second triggers the third and so on.

Each AD generator is equipped with a Polarizer (look at the Voltage Controlled Polarizer A-133 concerning details about the polarizer function) and a mixer that adds up all polarizer outputs. This allows to add up all AD/LFO output signals inverting or non-inverting with adjustable level to the mix output. Additionally a single output (Env 1...4) is available for each unit.

If the trigger input of unit 1 is controlled by a normal gate signal (e.g. from a keyboard resp. MIDI-to-CV/Gate interface) one obtains a very complex envelope signal at the mix output. The signal contains 8 segments controlled by Attack 1, Decay 1, Attack 2, Decay 2, Attack 3, Decay 3, Attack 4 and Decay 4. The transition between the stages (i.e. when the following AD generator is triggered) is controlled by threshold knob. The positive or negative contribution of each unit to the mix signal is adjusted with the Mixing Polarizer control. If the trigger input of unit 1 is controlled by the comparator output of unit 4 one obtains a 8 stage LFO.

The single AD outputs can be used to control VCAs or VCFs that open one after another corresponding to the AD signals (a little bit similar to the Shepard generator A-191).

The default-connection between the four units (CPn = Trig.n+1) can be interrupted by patching cables into the trigger inputs. Consequently the four units can be used as separate AD generators or LFOs. In any case the mix signal is available (e.g. mix of four AD generators or LFOs with adjustable level and sign).

In the LFO mode the comparator output serves as LFO rectangle output with adjustable pulse width (= threshold control).

Each unit is equipped with a separate LED display for envelop and comparator output. The shortest attack/decay time is about 5 ms, the longest attack/decay times are about 3 seconds (attack) / 10 seconds (decay). By changing the value of a capacitor the shortest time can be modified (details can be found here: A100_Capacitors.htm).

The sketch at the bottom of the page shows the module principle with 4 daisy-chained AD units (as predetermined by the normalled sockets), that are mixed with the integrated polarizing mixer.
Read more
 2 in stock $157.58
Cat: 745782 Rel: 09 Sep 19
 
Controller unit for the A-155 sequencer
Notes: Module A-154 is a supplement to the A-155 Analog/Trigger Sequencer module. It offers a lot of new features that are not available in the basic control unit of the A-155. The A-154 is used to replace the control unit of one or two A-155, i.e. the section marked "Control" with Start / Stop / Step / Reset buttons and inputs in the upper left corner of the A-155 front panel. If the A-154 is used to control the A-155 the control section of the A-155 is put out of action.

These are the features of the A-154:

Several running modes: forward, backward, pendulum, random, CV controlled step addressing. All modes are available as loop or one-shot.

LED display of the 5 different current modes and one LED for loop/one-shot display

Manual and voltage controlled selection (with attenuator) of the running mode. If no external control voltage is applied one of the 10 modes (5 modes x 2 loop/one-shot) is simply selected with a rotary knob. The CV input with attenuator is used to modulate the running mode with an external control voltage (digital high/low CV to switch between two modes or continuous analogue CV to sweep through different modes). With the combination of manual control and CV with attenuator it is possible e.g. to use only two neighbouring modes (e.g. forward/backward) or sweep through all possible running modes

Manual and voltage controlled selection (with attenuator) of first and last step of the sequence. The range is step 1...8 in 8 step mode resp. 1...16 in 16 step mode

If the running mode "CV Controlled Step Address" is selected the First Step section is used to determine the active sequencer step. Consequently manual and voltage controlled selection (with attenuator) of the active step is possible: the active step can be set by hand with the first step manual control and then modulated by an external control voltage (e.g. LFO, Random, S&H, Theremin, Light CV source, Joy Stick) at the first step CV input (with attenuator).

An internal voltage controlled clock generator with manual and CV control (with attenuator) is available. The output of the clock generator is displayed with a LED and is used as sequencer clock provided that no external clock signal is connected to the Clock In socket (normalled socket). If the CV input of the Clock section is connected to one of the analogue outputs of the sequencer the time for each step can be set separately. Even jumps (or skipping) will be possible as we will introduce the feature that a very short clock pulse will be generated if the control voltage exceeds a certain value. For example the gate row of the A-155 can be used to obtain skipping of steps: the gate output simply has to be connected to the CV input of the A-154 clock generator. If the corresponding switch of the A-155 is set correspondingly in the gate row the step will be skipped.

Manual and voltage controlled (with attenuator) pulse width (PW) of the clock signal. This features can be used to obtain a different gate length for each step: e.g. one of the CV outputs of the A-155 can be used to control the PW. With a PW control voltage coming from a LFO/random/S&H the gate length will change automatically. CV coming from Theremin A-178, ribbon controller A-198, light controlled CV A-179, joy stick A-174 are other ways to control the gate length.

8/16 step mode: A toggle switch us used to select 8 or 16 steps. The "16 step" mode requires two A-155 and one or more voltage controlled switches (e.g. A-150-1 or A-150-8). The voltage controlled switches are controlled by the "A3" output of the A-154. This output remains "low" as long as the active step is in the range 1...8 and turns to "high" in the range 9...16. The voltage controlled switches are used to switch between the CV/trigger/gates outputs of the first A-155 (step 1...8) and the second A-155 (step 9...16). In the A-154 user's manual the corresponding patch is shown.

If two A-155 are used they can work in parallel (8 steps) or serial (16 steps). The 8/16 steps switch determines if the 8 step mode (one A-155 or two A-155 in parallel) or the 16 step mode (two A-155 serial) is chosen. Both modes work with CV controlled step addressing too (see below). In 8 step mode only the steps 1...8 are addressed, in 16 step mode the steps 1...16. For serial operation an additional VC switch (A-150) is required - as mentioned above.
Read more
 1 in stock $169.47
Click for better price!
quote 745782
Cat: 745783 Rel: 09 Sep 19
 
Controller unit for the A-155 sequencer
Notes: Module A-154 is a supplement to the A-155 Analog/Trigger Sequencer module. It offers a lot of new features that are not available in the basic control unit of the A-155. The A-154 is used to replace the control unit of one or two A-155, i.e. the section marked "Control" with Start / Stop / Step / Reset buttons and inputs in the upper left corner of the A-155 front panel. If the A-154 is used to control the A-155 the control section of the A-155 is put out of action.

These are the features of the A-154:

Several running modes: forward, backward, pendulum, random, CV controlled step adressing. All modes are available as loop or one-shot.

LED display of the 5 different current modes and one LED for loop/one-shot display

Manual and voltage controlled selection (with attenuator) of the running mode. If no external control voltage is applied one of the 10 modes (5 modes x 2 loop/one-shot) is simply selected with a rotary knob. The CV input with attenuator is used to modulate the running mode with an external control voltage (digital high/low CV to switch between two modes or continuous analog CV to sweep through different modes). With the combination of manual control and CV with attenuator it is possible e.g. to use only two neighbouring modes (e.g. forward/backward) or sweep through all possible running modes

Manual and voltage controlled selection (with attenuator) of first and last step of the sequence. The range is step 1...8 in 8 step mode resp. 1...16 in 16 step mode

If the running mode "CV Controlled Step Address" is selected the First Step section is used to determine the active sequencer step. Consequently manual and voltage controlled selection (with attenuator) of the active step is possible: the active step can be set by hand with the first step manual control and then modulated by an external control voltage (e.g. LFO, Random, S&H, Theremin, Light CV source, Joy Stick) at the first step CV input (with attenuator).

An internal voltage controlled clock generator with manual and CV control (with attenuator) is available. The output of the clock generator is displayed with a LED and is used as sequencer clock provided that no external clock signal is connected to the Clock In socket (normalled socket). If the CV input of the Clock section is connected to one of the analog outputs of the sequencer the time for each step can be set separately. Even jumps (or skipping) will be possible as we will introduce the feature that a very short clock pulse will be generated if the control voltage exceeds a certain value. For example the gate row of the A-155 can be used to obtain skipping of steps: the gate output simply has to be conneted to the CV input of the A-154 clock generator. If the corresponding switch of the A-155 is set correspondingly in the gate row the step will be skipped.

Manual and voltage controlled (with attenuator) pulse width (PW) of the clock signal. This features can be used to obtain a different gate length for each step: e.g. one of the CV outputs of the A-155 can be used to control the PW. With a PW control voltage coming from a LFO/random/S&H the gate length will change automatically. CV coming from Theremin A-178, ribbon controller A-198, light controlled CV A-179, joy stick A-174 are other ways to control the gate length.

8/16 step mode: A toggle switch us used to select 8 or 16 steps. The "16 step" mode requires two A-155 and one or more voltage controlled switches (e.g. A-150-1 or A-150-8). The voltage controlled switches are controlled by the "A3" output of the A-154. This output remains "low" as long as the active step is in the range 1...8 and turns to "high" in the range 9...16. The voltage controlled switches are used to switch between the CV/trigger/gates outputs of the first A-155 (step 1...8) and the second A-155 (step 9...16). In the A-154 user's manual the corresponding patch is shown.

If two A-155 are used they can work in parallel (8 steps) or serial (16 steps). The 8/16 steps switch determines if the 8 step mode (one A-155 or two A-155 in parallel) or the 16 step mode (two A-155 serial) is chosen. Both modes work with CV controlled step addressing too (see below). In 8 step mode only the steps 1...8 are addressed, in 16 step mode the steps 1...16. For serial operation an additional VC switch (A-150) is required - as mentioned above.

The functions of the Start/Stop/Step/Reset buttons and inputs are the same as for the "old" control unit of the A-155:

A high level at the Start input or operating the Start button starts the sequence from the momentarily addressed step. Not working in "CV controlled step address" mode.

A high level at the Stop input or operating the Stop button stops the sequence (the last active step remains addressed). Not working in "CV controlled step address" mode.
Read more
 1 in stock $162.98
Cat: 741401 Rel: 01 Aug 19
 
Analogue waveform generator & oscillator - 6HP
Notes: The Electrosmith 3340 VCO is an all analogue, voltage controlled waveform generator that uses a reissue of the legendary Curtis CEM3340 IC.

Many believe this chip to be the greatest sounding analogue oscillator of all time. Simultaneous outputs of sine, triangle, sawtooth, and square waves are available along with linear/exponential FM, hard/soft sync, and PWM capabilities. Volt per octave tracking covers a huge 10+ octaves and is extremely stable across all temperatures. Snag a piece of history with the Electrosmith 3340 VCO.
Read more
 1 in stock $155.43
Click for better price!
quote 741401
Cat: 716534 Rel: 24 Jan 19
 
10HP Eurorack module featuring 4 stereo inputs with simultaneous volume adjustment on both channels
Notes: Black Stereo Mixer is just what you need, if your setup has several nowadays gaining popularity modules with stereo inputs or outputs, like Black Hole DSP, Erica Fusion Delay, MI Clouds or some other. In order to save rack space, we designed compact mixer with lot of cool, performance oriented features.

In order to save rack space, we designed a compact mixer with a lot of cool, performance oriented features.

Check out also the Black Pre-fade Listen Expander that is a satellite module to Erica Synths Black Stereo Mixer!

Erica Black series are high-end modules with unique functionality. Only the highest quality components are used and all inputs and outputs are protected against undesired overvoltage. When designing the Black Series, we did not economise on the module width, we put design and usability first. Big knobs are assigned to functions that make difference in sound. Together the Erica Black series are a range of modules that make an entire synthesizer.
Read more
 1 in stock $152.19
Click for better price!
quote 716534
Cat: 712712 Rel: 10 Jan 19
 
Stereo mixer, 4 stereo in, with limiter - 10HP
Notes: Drum Stereo Mixer completes the drum mix and has configurable stereo inputs to receive signals from stereo FX modules and stereo output to interface the modular system with external devices. LEDs next to each input give visual feedback on a signal level.
Read more
 1 in stock $171.62
Click for better price!
quote 712712
Cat: 744601 Rel: 23 Sep 19
 
Compact three-channel mixer - 6HP
Notes: The "AUTOMIX" module is a compact three-channel mixer for audio or CV sources in the voltage range +-5v (audio modular level).

The mix level of each track can be adjusted and recorded with the track control. The recording time per track is more than one minute. The playback speed is also adjustable.

The recorded track is played back once when the Play button is pressed briefly (one shot) or when the Loop button is pressed a little longer.

In addition, the 3 inputs can be switched separately to +6db audio (for external line level sources) using the slide switch on the rear panel.

All three tracks have a common reset input. The track data remains permanently stored (battery buffered memory).
Read more
 1 in stock $194.30
Click for better price!
quote 744601
Cat: 731956 Rel: 16 May 19
 
3-channel module for recording & playing back movements of controllers - 6HP
Notes: The FLAME "C-3 MK2" is a three-channel module for recording and playing back movements of controllers. These can be recorded with each channel's individual knob. The movements will be output as control voltages. The recording time per track is over one minute. The playback speed is adjustable. All three tracks have a common reset input. The track data remains permanently stored (battery-backed memory). The module can be globally switched to bipolar or unipolar voltage range (switch on the PCB).
Read more
 3 in stock $160.82
Click for better price!
quote 731956
Cat: 744602 Rel: 02 Oct 19
 
Dual signal/audio crossmixer
Notes: The "CROSSMIX" module contains two independent crossfaders with two inputs to one output and is designed for audio or CV sources in the voltage range +-5v (Audio Modular Level).

In addition, the 4 inputs can be switched separately to +6db audio (for external line level sources) using the slide switch on the rear panel.

The two crossmix controls can be recorded. The recording time per channel is more than one minute. The playback speed can be adjusted in playback.

The recorded track is played back once when the Play button is pressed briefly (one shot) or in the loop when the button is pressed a little longer.

Both crossfaders have a separate reset input as well as a separate CV input (+-5V ) for controlling the mix e.g. by an LFO.

The track data remains permanently stored (battery buffered memory).
Read more
 1 in stock $194.30
Click for better price!
quote 744602
Cat: 731957 Rel: 03 Jul 19
 
Small compact joystick module with recording function - 8HP
Notes: The module can record the joystick movement up to a length of over a minute. The sequence remains stored in the battery-backed RAM after switching off. When playing the sequence, it can be manipulated in speed and playback direction.

There is a FREEZE function to hold the current joystick position plus an external reset input. In addition, a GATE is set during movement and a CV voltage is output as a function of the joystick movement. The ranges of the X / Y output voltages are bipolar +/- 5v or unipolar from 0 to + 10v. Both channels X and Y have a passive attenuator potentiometer, so that the voltage range can also be set lower.
Read more
 1 in stock $160.82
Click for better price!
quote 731957
Cat: 744063 Rel: 12 Sep 19
 
CEM3340 based VCO - 10HP
Notes: CEMosc is here, a stable AS3340 based VCO which tracks beautifully, and is feature rich. Easy to build and calibrate too.

CEMosc features:

- Onboard voltage regulation for tuning and tracking stability
- A rotary octave switch as well as a fine tune knob
- Both manual PW as well as PWM are available
- Linear and Exponential FM inputs, each with attenuators
- Both soft and hard sync
- Sawtooth, Triangle and Pulse outputs
Read more
 1 in stock $192.13
Click for better price!
quote 744063
Cat: 732134 Rel: 15 May 19
 
Updated version of the State 700 module - 10HP
Notes: State 700 Mk2 is an update of this popular module. The Mk2 is the same size as the Mk1, at 10HP wide, but features additional audio and CV inputs, both with their own attenuators. Based on the Roland System 700 state variable filter module, State 700 provides lowpass, bandpass and highpass outputs simultaneously. The Mk2 features upgraded outputs from the original module, keeping signals more in line with Eurorack output levels. A big part of the sound of the State 700 is the way in which resonance is reduced as the audio inputs are driven harder. It won't self oscillate with a hot audio input, throttle back a little and you'll get squelchy ear bleeding resonances!
Read more
 2 in stock $192.14
Click for better price!
quote 732134
Cat: 725316 Rel: 03 Apr 19
 
ARP 4023 VCF clone
Notes: Frequency Central's Whiteface is a new voltage controlled analogue filter for Eurorack based on the ARP 4023 filter, found in the "whiteface" Odyssey MK1 Synthesiser.

Besides the classic cut-off & resonance controls, it comes with two audio inputs as well as two CV inputs.

The rare parts have been engineered out (and the need for matched transistors for the CV input section) by using a Roland style circuit there instead - no change to the vibe though! The audio path remains pure ARP, with one exception. Built stock from the schematic, the resonance would clip above 3 o'clock, in a way which is neither musical or desirable. An inverting buffer has now been used, which adds a bit of gain to bring it up to modular levels. A nice side effect of the inverting buffer is that if you mix the input signal with the filter output, and find the sweet spot, you can do high-pass filtering too!
Read more
 1 in stock $151.11
Cat: 746966 Rel: 12 Sep 19
 
Great sounding VCO for Eurorack - 10HP
Notes: Here's the Roland 100M VCO adapted to Euro. The hard-to-find UA726 has been replaced with a CA3046 with no loss of performance. No hard to find parts whatsoever. The PCB also includes pads for SMD LM3046. It'a the golden age right here.

- A six position rotary switch for octaves gives plenty of range. The PITCH pot is fine tune
- Individual outputs for ramp, square and triangle - an improvement on the original
- Built in chip heater
- Onboard LFO! Yes that's right, an onboard LFO (thanks MC202) for introducing FM and/or PWM
Read more
 1 in stock $192.14
Click for better price!
quote 746966
Cat: 720430 Rel: 28 May 19
 
Trigger & CV sequencer - 6HP
Notes: The TRAX is a compact 6 HP Eurorack module that manages to combine the best elements of classic sequencers mixed with some amazing new features. It offers a wide range of possibilities from traditional to the more experimental algorithmic type sequencing.

With unique new features like Evolve, once you enter a pattern or two, the TRAX is able to compare the patterns and generate numerous related patterns instantly for you to access. In addition, the Remix feature will provide 256 variations of each pattern entered.

The TRAX features a Trigger Output, 2 CV Outputs, and an Analog Clock Input that doubles as an Output when reconfigured. Combine the TRAX module with the new MIDI BUS module to control TRAX with a MIDI Clock, send TRAX MIDI Input, or even send MIDI Note Output from the TRAX!

Each Trigger and CV part have their own parameters to control playback type, direction, remix, evolve, phi, randomize, copy/paste, offset, loop steps, loop bars, and a regeneration loop point for evolve and phi modes. And our unique CV Links feature allows any or all of these parameters to be used independently, or instead follow the Rhythm part's parameter values to behave more like traditional sequencers.

A host of Global features provide playback, sync, tempo control, swing, mute, fills, rec type, independent CV output quantization to 29 different scales, MIDI, MIDI to CV conversion, and screensaver.
Read more
 5 in stock $178.09
Cat: 739110 Rel: 28 May 19
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The TRAX is a compact 6 HP Eurorack module that manages to combine the best elements of classic sequencers mixed with some amazing new features. It offers a wide range of possibilities from traditional to the more experimental algorithmic type sequencing.

With unique new features like Evolve, once you enter a pattern or two, the TRAX is able to compare the patterns and generate numerous related patterns instantly for you to access. In addition, the Remix feature will provide 256 variations of each pattern entered.

The TRAX features a Trigger Output, 2 CV Outputs, and an Analog Clock Input that doubles as an Output when reconfigured. Combine the TRAX module with the new MIDI BUS module to control TRAX with a MIDI Clock, send TRAX MIDI Input, or even send MIDI Note Output from the TRAX!

Each Trigger and CV part have their own parameters to control playback type, direction, remix, evolve, phi, randomize, copy/paste, offset, loop steps, loop bars, and a regeneration loop point for evolve and phi modes. And our unique CV Links feature allows any or all of these parameters to be used independently, or instead follow the Rhythm part's parameter values to behave more like traditional sequencers.

A host of Global features provide playback, sync, tempo control, swing, mute, fills, rec type, independent CV output quantization to 29 different scales, MIDI, MIDI to CV conversion, and screensaver.
Read more
 1 in stock $169.03
Cat: 744610 Rel: 06 Sep 19
 
Eurorack receiver for the Wave sensor that allows Wave to connect to modular synthesisers - 4HP
Notes: The Wavefront module is the Eurorack receiver for Wave that allows Wave to connect to modular synthesizers. With Wavefront you can completely bypass the computer and bring unprecedented sound control, effect shaping and manipulation to modular setups.

Use subtle gestures to add vibrato to your favourite lead synth module, or use more visible gestures while performing.

The buttons are great for triggering sequences while the tap lets you interact with percussive modules in a completely new way. Drumming on a table has never been as fun!

To use Wavefront you need one Wave (ring) per module.
Read more
 1 in stock $194.28
Click for better price!
quote 744610
Malekko Quad VCA Module (synth module)
Cat: 676895 Rel: 17 May 19
 
4-channel, advanced voltage controlled amplifier - 8HP
Notes: Quad VCA is a 4-channel, advanced voltage controlled amplifier with an analog signal path that can either be used stand-alone, or in tandem with the Varigate 4+ and 8+ for multiple preset recall over the power bus. Input channels 2-4 are normalled to 1 and Scan Mode allows for complex level and modulation routing. Each channel includes a mute function and all outputs are summed to a mix output. To adjust level and CV modulation per channel, use the Select Channel buttons and then adjust the Offset and Attenuverter controls. Scan Mode includes two functions. Scan: Insert 4 inputs, 1 CV and monitor Mix output for 4:1 scanning. Pan: Insert an input into Ch 1 and Ch 1 CV will route input to up to 4 different outputs. Offset and Attenuation can be adjusted to control how incoming CV is applied. The Remote switch allows you to access saved presets when paired with Varigate 8+ (100 presets) or Varigate 4+ (16 presets). In stand-alone mode, all settings are auto-saved.
Read more
 4 in stock $178.10
Cat: 711981 Rel: 13 Dec 18
 
Four-channel linear multimode envelope generator & LFO - 6HP
Notes: Pons Asinorum is a compact four-channel multimode envelope generator and LFO with voltage control. PA has three different envelope shapes, CV over cycle length, and a unique single encoder control scheme that makes adjusting multiple channels mid-performance easy. Channels can be set separately to envelope mode or to cycle in LFO mode, giving PA maximal flexibility in a minimal footprint.
Read more
 1 in stock $155.43
Click for better price!
quote 711981
Cat: 739891 Rel: 30 Aug 19
 
Intuitive pitch CV sequencer in 4HP
Notes: Ultra-simple 16-step Eurorack CV sequencer with randomisation option and storage for up to 16 patterns. Straight to the point business, all in just 4HP of rack space.

Supplier notes:
Small, easy-to-program sequencers are a bit of a rarity. Vox Digitalis is our answer to this issue. With intuitive displays and simple controls, VD is perfect for all your pitch CV needs. Set your sequence length, dial in each note, randomize, save and load 16 sequences -- VD does all the stuff the big sequencers do, just in 4HP.
Read more
 1 in stock $175.93
Click for better price!
quote 739891
Cat: 732313 Rel: 11 Sep 19
 
Portable power source interface for Eurorack
Notes: Release your mind and release your modular system, with the Polyend Anywhere power compatibility Eurorack module. The Polyend Anywhere hooks up to any Power Bank battery to allow the user the liberty of portability with their modular system. Take your system for a walk! Smell the flowers, and use the inspiration to create the simultaneous feedback/AM/FM patch you've been dreaming of!
Read more
 5 in stock $159.75
Click for better price!
quote 732313
Cat: 743613 Rel: 23 Sep 19
 
Clean/character auto compressor & distortion - 4HP
Notes: Autodyne is a 4hp auto-compressor/distortion featuring a multi-mode side chain filter and NY style parallel compression blend control.

Ratio, Threshold and Gain are all built into a single, simple to use COMP control. Compression gets more extreme as this control is swept past centre position. Setting below centre offers more subtle/typical compression.

Autodyne Automatically Responds to Transients, will glue a mix with ease and dial in the perfect feeling of the program material you feed into it.

GAIN CONTROL to trim the final output gain or offer up some extremely brutal distortion, whichever you prefer.

Switchable Side Chain Filter is provided along with a triple slope high pass filter, in order to retain lower frequency content and unwanted over-compression by removing them from the Side Chain. Input signal is normalized into the Side Chain or an external signal may be utilized via the Side Chain Input.

Parallel Compression BLEND Control mixes the unaffected input signal with the compressed output for even further control of your sound. Compression may be bypassed simply by sweeping this control to minimum position.

Controls are simple enough to match in tandem for dual unit, stereo operation, if desired.

Audiophile grade discrete components and Burr-Brown op amps used throughout.
Read more
 1 in stock $192.14
Click for better price!
quote 743613
Cat: 744597 Rel: 27 Aug 19
 
6HP power supply for guitar pedals, plus two small signal splitters
Notes: Stoker Elektrek is equipped with a 2.1 mm hollow connector to supply power to effect pedals. A short adapter cable is included. The module itself draws power from the modular PSU. A look at the other technical data reveals that Stoker Elektrek is compatible with many effect pedals:

- 9V DC power supply
- Up to 750 mA
- Polarity: peak = negative / ring = positive

On top of that, Stoker Elektrek offers two mini multiples, each with one signal input and two outputs, which can also be used as a large splitter.
Read more
 1 in stock $189.97
Click for better price!
quote 744597
Artículos del 1 al 31 de 31 en la página 1 de 1

Filter

Synth modules
Accesorios
Release Date
Featured
Close