DJ Equipment charts

Notes: As close to an industry standard as you can get. The archetypal DJ headphones: punchy, comfortable and durable. Firm favourites of countless DJs, for good reason.

Supplier's notes:
The Sennheiser HD 25 Headphones have been redesigned, featuring the iconic split headband with a single-sided connection cable and a flip-away earcup for convenient single-sided listening.

With a frequency response of 16Hz to 22kHz, an impedance of 70 ohms and a maximum SPL of 120dB, the HD 25 headphones are ideal for any monitoring application; whether broadcasting, live recording, in the DJ booth or just travelling from venue to venue.

Notes: These are the same high-quality inner sleeves that MOFI use for their most-prized vinyl releases. They are imported, three-ply, anti-static, premium sleeves (similar to rice paper) and work with both LPs and laser discs.

Back construction consists of a paper layer sandwiched between two sheets of high-density polyethylene (HDPE) with a translucent HDPE front.

These custom-designed inner sleeves protect against all common problems associated with regular sleeves of all types, such as scratching, static build-up and contamination etc.

Your records are irreplaceable, these sleeves will guarantee they last a lifetime.

Notes: Complete Vinyl Cleaning Kit:

Record Brush & Stylus Gel

Keep your vinyl records and your record player in top form with this premium album-cleaning kit from Big Fudge Vinyl. The kit includes a record brush and stylus cleaning gel, so you can continue enjoying your favorite music with flawless performance.

A Truly Static-Free Vinyl Cleaning Brush

This kit includes a no-scratch, record-cleaning brush made with premium carbon fiber to eliminate static charges from your records. Less static means less dust and fewer unwanted particles, so you can get the maximum life from your records and enjoy better audio quality.

The soft-bristled vinyl brush cleaner is gentle on vinyl, and it includes a protective cover to prevent dust accumulation. Just gently grip the ribbed handle and slide the brush along the surface of your record. It's incredibly simple.

A Stylus Gel to Ensure Flawless Performance

In addition to the record brush, Big Fudge has also developed a one-of-a-kind cleaning gel for your record player needle that's simple, gentle, and extremely effective. Just lower the tonearm into the gel to eliminate dust from your needle and improve the sound quality of your vinyl records. Our stylus gel is non-toxic and has been extensively tested to ensure total safety and maximum results.

Notes: This kit includes:

Microfiber fabric covered cleaning pad. Generous size: 5" x 3.5" x 1.5". Highly absorbent and grime removing fabric. Easy to use to clean records. Easy to wash when it gets dirty.

G2 High Tech Record Cleaning Fluid in 4 oz Mist Spray. More than 500 mist sprays to clean a lot of records!

SC1 Stylus Brush. 4.6 inch long curved handle with soft, fine nylon bristles remove lint and gunk from the stylus and underside of the cartridge. The best stylus brush on the market.

SC1 Stylus Cleaning Fluid. Low alcohol with technical surfactants to dissolve sticky gunk from the stylus, so the SC1 Brush can remove it. A delicate method that will do no harm to the stylus or cantilever.

Record label protector mask. Apply to the record label to keep it dry while mist spraying the G2 Fluid on the record.

Notes: Widely hailed as the best product of its kind, Mobile Fidelity Sound Lab's Archival Record Sleeves are "clearly" superior. These sturdy, 4-mil thick outer sleeves are made from polypropylene, which makes them more transparent than polyethylene sleeves. Besides providing rock-solid protection from dust, hair, and other debris, these sleeves allow you to enjoy eye-popping album graphics with more clarity.

The 4-mil thickness affords stellar archival safekeeping, providing protection against scuffs, wear, denting, dirt, and the moisture that can travel on fingertips. Consistently using these sleeves throughout your collection ensures easy access to LPs on shelves or racks. The sleeves are sized just large enough to provide a close fit while allowing enough room to accommodate gatefold jackets. These sleeves are an absolute necessity for anyone who cares about their vinyl collection. Each pack contains 50 outer sleeves.

Put a MoFi outer sleeve on your favorite LP cover, and you'll never be tempted to remove it. The jacket will remain safe, and you'll be able to see the artwork and text clearly. Whether a jacket is in mint condition or slightly worn, this protective outer sleeve will prevent deteriorations in quality. Housing your LP jackets in these strong sleeves provides peace of mind that disasters can be averted - especially those involving pets or any type of airborne debris.

Notes: One of the best solutions for 7"/10"/12" record cleaning, HumminGuru's ultrasonic approach automatically restores your records, cleaning and drying within 7 to 15 minutes per disc. Simple, easy to use and effective.

Supplier's Notes:
The HumminGuru Ultrasonic Vinyl Record Cleaner

An all-in-one ultrasonic vinyl cleaning machine that automatically cleans and dries your record in just 7 to 15 minutes. It is compact, lightweight, quiet and compatible with 100v-240v.

HumminGuru ultrasonic vinyl record cleaner not only brings your dirty records back to life; its ease of use and intuitive design also makes record cleaning a more pleasant experience. It has been designed to clean and dry the vinyl records in one step using ultrasonic cleaning system. With 40kHz frequency, it is effective to remove the contaminants and dust on the record without causing any damage to the surface of the record. Less is more. Its lightweight and compact design make it easy to transport and creates more space to store. The simple yet elegant look was created to intuitively fit into your lifestyle. HumminGuru would be your best option in quality for price and value.

Maintenance Features

Air Filtration - To prevent external dust from blowing back onto the record during the drying process. The filter is washable and replaceable, which makes for easy maintenance.
Water Filter - A detachable water filter in the water tank gives an option to reuse the cleaning water. The filter is washable, which makes for easy maintenance.
Removable water tank - Water tank is removable for easy cleaning and maintenance
Replaceable rotation wheels - Easy to replace with HumminGuru assigned maintenance tool

Specifications

Item Name: HumminGuru Ultrasonic Vinyl Record Cleaner
Net Weight: 3.1 kg
Material: ABS & Stainless Steel
Colour: The New Blue
Dimensions: 34 x 15 x 28 cm
Adapter (Supported Voltage): 100 - 240 V AC 50-60 Hz
Water Tank Capacity: 400 ml
Ultrasonic Frequency: 40 kHz
Packing Volume: 38 x 21 x 37 cm
Packing Weight: 4.88 kg
Cbm: 0.03
Certifications: RoHS Directive 2011/65/EU, (EU) 2015/863
1 Year Warranty: HumminGuru comes with 1 year world-wide warranty.

Humminguru supports all commonly used voltage standards from 100v-240v.

The package comes with:

Ultrasonic Vinyl Record Cleaner
A Cleaner Lid
Power Cord
Manual Instruction
Removable Water Tank x 1
Maintenace Tool x 1
Replacement kit (2 pairs of rotation wheels, 5 pcs of air filters and 5 pcs of water filters) x1
Adapters for 7" and 10" records

Notes: Aluminium-framed 50-capacity hinged 12"/LP record box with removable lid, reinforced rounded corners and EVA lining.

Notes: The Audio Anatomy Vinyl-Record Stand made from high impact polystyrene is very durable and very lightweight at the same time. It impresses with its trendy retro design, which offers space for 40 records in a simple way. The Audio Anatomy Vinyl-Record Stand is produced in Germany.

Notes: Latest version of the classic Technics DJ headphones, updating the classic RP-DJ1200 design, which sold more than half a million units in its lifetime. Solid stuff. Popular for a reason.

Supplier notes:
New-Standard EAH-DJ1200 DJ headphones with excellent functionality, furability, and DJ playing performance.

The EAH-DJ1200 is a successor model to the RP-DJ1200, which has sold more than 500,000 units since it was launched in 1996. While inheriting the basic concept of the previous model, the EAH-DJ1200 better meets the needs of today's DJ users, resulting in DJ headphones with more advanced functions, design and sound quality. In addition to ordinary listening, the EAH-DJ1200 provide precise monitoring of the beat even in large-volume sound environments such as those in clubs. The matte finish black colour design also makes it an excellent match for the SL-1200MK7 DJ Turntable.

The newly developed driver uses a 40mm-diameter CCAW voice coil. It achieves clear, detailed sound, and high-durability input (2,500 mW) with no distortion even at high volumes. Also, because the sound is well balanced from low to high ranges, DJ play in high-volume surroundings is not buried in noise and monitoring is comfortable.

The EAH-DJ1200 is a lightweight on-ear type design. The housing is equipped with lockable swiveling mechanisms so the headphones can be used for monitoring with one ear. It adapts to all styles of monitoring by DJs. The headphones can be folded compactly for easy portability and storage.

The detachable cord is easy to clean and maintain. A locking mechanism is provided to prevent accidental detachment of the cord during use. The stretchable coiled cord, coupled with the L-type plug which resists internal wire breakage, enables extra ease of use and high durability. It withstands harsh and intense usage by professional DJs.

Based on the RP-DJ1200, which remained as a long-selling model in the market for more than 20 years, the EAH-DJ1200 sports a contemporary black color scheme for an updated appearance. Armed with high durability and excellent functionality, the EAH-DJ1200 matches perfectly with the SL-1200MK7, which features a matte black finish.

Notes: The Kyowa Stanton 500AL is suitable for replacement for Stanton D5100AL, D5100AL Mk2, D5107AL, D5107AA styluses. Fits Stanton cartridges 500A, 500AA, 500AL, 500AL Mk2, 500E, 505SK, 505SK2, 520SK.

Notes: Keep your vinyl collection in pristine condition with this specially designed antistatic brush. Designed to clear the fine grooves of dust & fluff without damaging the delicate playing surfaces, an essential requirement for maintaining optimum reproduction quality.

Notes: 200-capacity 7" record box with aluminium frame, hinged lid, egg-foam/EVA lining and supporting feet.

Notes: The classic SL-1200 is one of the first covers Decksaver ever manufactured. Technics stopped producing the lids for these thoroughbred decks shortly after they were discontinued, meaning that there would be thousands of turntables out there with little or no protection.

Meanwhile, the 1200 (and 1210) has remained an extremely popular item on the second-hand circuit, becoming perhaps one of the most sought-after pieces of discontinued music equipment, especially the limited edition models, which exchange hands for eye-watering amounts.

Despite its rugged and heavy-duty characteristics which earned the turntable it's reliable "workhorse" reputation, it must be noted that the elements of the topside of the device are still relatively delicate, and can be prone to damage if not handled properly.

The tonearm can be damaged fairly easily, and replacing it can be an awkward process. Whilst it is feasible to replace the tonearm, it requires a degree of skill and can be cumbersome. What makes the process even more difficult, is that individual tonearms are increasingly rare, and it is often more economically viable just to replace the entire unit, rendering the old unit useless.

The platter, while sturdy, can also be damaged through enough pressure, which can damage the delicate mechanical components underneath. The switches and buttons, while comparatively tough compared to other models on the market, can also be broken easily through accidental damage.

This Technics turntable cover fits the 1200, 1210 and similar models, such as the Pioneer DJ PLX-CRSS12 and PLX-1000 perfectly. The form fit allows them to fit easily into a gig bag or other ancillary equipment case, whilst the simple push fit design shields the tonearm from accidental damage whilst making allowances for cables, so your turntable can sit ready for operation.

Over the years, these covers have saved tens of thousands of Technics turntables from the scrapyard. Without them, who knows how much rarer the 1210s would be today?

At home, on the road, or in the club, Decksaver has your turntable covered.

Weight 0.63 kg
Length 45.6 cm
Width 35.6 cm
Height 7.5 cm

Material: Smoked clear polycarbonate.

Fits:

SL-1200
SL-1200/1210 MK2
SL-1200 MK3D
SL-1200 MK4
SL-1200/1210 MK5
SL-1200 MK6/MK6KI
SL-1200/1210 MK7
PLX-CRSS12
PLX-1000
SL-1200 LTD/GLD
SL-1200 M3D
Mixars LTA/STA
Gemini PT-1000
SL-1200 G
SL-1200 GR

Notes: This bag which accommodates 40 records and additional accessories, is absolutely perfect for shorter DJ gigs or for the weekly record shopping trip. With a lot of small accessory pockets, the bag can also be used as a multi-functional courier bag for office or leisure time.

Notes: If you're just getting into vinyl, or finding your way back, the GrooveWasher INTRO Kit is a great way to enhance your overall experience. This Kit cleans your records using High Tech G2 Record Cleaning Fluid with our highly absorbent and washable microfiber fabric covered pad. The Label Protector Disc keeps the record label dry during cleaning.

If the price tag for other GrooveWasher Kit's is a hurdle, give this low cost INTRO Kit a try!

The INTRO Kit contains:

Microfiber fabric covered cleaning pad. Generous size: 5" x 3.5" x 1.5". Highly absorbent and grime removing fabric. Easy to use to clean records. Easy to wash when it gets dirty.

G2 High Tech Record Cleaning Fluid in 2 oz Mist Spray. More than 250 mist sprays to clean a lot of records!

Record label protector mask. Apply to the record label to keep it dry while mist spraying the G2 Fluid on the record.

Notes: The G2 Fluid 8 oz Refill Bottle

One 8 ounce bottle of G2 Fluid with spout top. Use to refill the 2 ounce and/or 4 ounce mist spray bottle. 1,000+ mist sprays in this 8 ounce bottle.

High tech G2 record cleaning fluid. Contains:

Surfactants: State of the art detergents dissolve and suspend fingerprints and other oily grime.

Super wetting agent: A specialty chemical that reduces the G2 Fluid's surface tension to reach the bottom of the groove. When you spray G2 Fluid on a record you can see it spread down the grooves.

Emulsifiers: Holds the oils, dirt, mildew and microdust particles in suspension. Then the microfiber fabric cleaning pad wipes and pulls the dirt-filled solution from the record surface.

Laboratory grade, double deionized, carbon filtered & UV treated water: Carrier for the active cleaning ingredients. Eliminates static electric charges on the record's surface on contact.

"This refill is one of the essential parts of the GroveWasher product that simply works great. Gently cleans the record surface lifting out all the accumulated dirt and grime with ease." Richard Villanova

Designed and handcrafted by the GrooveWasher Team in North Kansas City, MO, USA.

Notes: Replacement JNP110 stylus with elliptical stylus and aluminium alloy cantilever.

Fits MP110 cartridge.

Notes: Developed in the UK by DJ's, Record Collectors & Vinyl Enthusiasts.

Near Mint has been specially blended to make sure your vinyl is cleaned to the highest standard. Using a greater percentage of integral ingredients and purified chemicals, Near Mint can offer the best results in cleanliness, ensuring no residue remains on your record.

Near Mint is the most effective, chemically balanced & hard hitting record cleaning solution on the market to date boasting a double strength attitude.

Notes: Blank Album Jackets, Black, 20x 12 Inch LP Vinyl Covers

Vinyl Is Forever

... That is if you take good care of it! Big Fudge is the leading brand in the protection, storage, and display of vinyl records - like this set of 20 Glossy Black Album Covers!

It's Time to Replace Those Sad Old Vinyl Jackets

You, and those who came before you, loved those albums so HARD the jackets are now tattered. So replace them with blank album covers that let you spend less time with the sticky tape and more time listening to perfectly protected tunes. Unlike other jackets with thin spines that bunch up your sleeves, these jackets let you write ON the spine and keep the sleeves smooth and flat.

20 Blank Jackets for 12" Vinyl
400gsm Thick Glossy Black Cardboard - Acid-Free
Compatible With Standard 12" Inner and Outer Sleeves
3.5mm Spine To Label Your Albums with Thin Chalk Marker

Fits Your Favourite Sleeves

These Black and White Album Covers fit 12" albums like a hug from Tony Bennett. Some jackets make inner sleeves bunch up, but Big Fudge covers let plastic or paper sleeves slide in like a dream and then fit snugly to prevent them from falling out.

Add Your Artwork

Thin spines are annoying. But these jackets have a 3.5 mm thick spine, so you can label it. The front lets you glue or sticker art and then slide it into your outer sleeve. Use thin chalk markers that require a solvent to remove.

20x black Jackets

Your order includes 20 vinyl covers. Acid-free, 400 gsm glossy black cardboard jackets with the same quality you expect from Big Fudge. These will fit all your vinyl, even 180g pressings.

They've Had a Hard Life

You've dragged them around town, listened to them a million times, or found them already pre-loved and worn-out; now give them a new start at life with these Album Covers from Big Fudge - the brand that thousands of vinyl fans love and trust.

Notes: Drain the static charge from your records and lift any residual dust and grime with the anti-static vinyl brush.
The conductivity of the brush's carbon fibre bristles eliminates static charges while gently and efficiently removing the dust, grit and particles that bung up your vinyl's grooves and degrade your record's sound.
The conductive carbon fibres reach deep into the grooves of your vinyl to remove even the smallest particles, leaving your records clean while prolonging the life of vinyl and stylus.

- Hand-made carbon hair brush for removing dust from vinyl records
- The brush makes the record antistatic so it does not attract dust
- For those who care for their collection of vintage or brand new vinyl records
- Can also be used for Schellack records

Notes: NI's mixer controller gets a major update, including high-quality audio interface, stems control and exceptional visual feedback. Full Traktor Pro 4 licence included, making this compact controller incredible value for beginners and experienced DJs alike.

Supplier's Notes:
Traktor Z1 MK2 is an ultra-compact mixer controller and soundcard, for hands-on control of Traktor software across up to four decks. Z1 is ideal for newer DJs who want to lock in the fundamentals with room to grow. But it's equally suited to established users looking for a compact and flexible setup for performance in different settings - with the option to add more modular controllers.

Compact But Powerful
Throw it in your bag and take it with you anywhere. Z1 MK2 lets you get hands-on with Traktor Pro 4 without the need for any extra gear, thanks to the integrated audio interface.

Simplicity
Z1 MK2 focuses on all the fundamentals you need for a creative and dynamic mix. There's a pair of channel volume sliders and a crossfader, plus dedicated 3-band EQ controls, a pre-listen section, and mixer effect controls.

Room To Grow
Traktor's modular gear gives you room to grow your setup as you develop your skills. Looking to take things to the next level? Then add additional modular controllers like X1 or F1, depending on your needs.

An internet connection and a graphics card that supports OpenGL 2.1 or higher are required to download and activate the Traktor software. Once installed and activated, all products can be used offline.

Included software: Traktor Pro 4

Notes: Never let it be said Suck UK don't dabble in science. In the name of completely misunderstanding Schrodinger's work, Suck UK introduce their newest cat/box combination, the scratch mat. The cats scratch furniture to mark their territory, exercise their muscles and for sheer pleasure. All similar reasons youths mix music and if you are to cross over both those cultures you'd rather get cats mixing music than teenage boys bringing bedraggled birds back to your doorstep.

The decks come flat packed and fold together into a simple structure with poseable tone arm and a top which spins as your cat paws at it, meaning you can sit and giggle in a look the cat is doing human things way rather than watch in horror as she shreds your favourite couch into tiny pieces.

Notes: High quality protective covers for 12" vinyl records - pack of 30. Compared to the previous model (NO108/3), the thickness is further increased from 75u to 100u, offering strong protection from scratches and dust. 325 x 325mm.

Notes: The heavyweight 12" glass clear PVC record sleeve fits over your record in its sleeve.

Notes: The Acc Sees velvet antistatic vinyl brush cleans away dirt & grease while reducing static build up. This helps to improve sound reproduction quality and prolong the life expectancy of vinyl discs.

Notes: Part of HumminGuru's excellent value record care range, the Orbit is designed to remove static from your vinyl in any setting. Portable, easy to use and just as good for DJs as it is for home hi-fi use.

Supplier's Notes:
Re-define a Simpler Way to Eliminate Static

Vinyl records accumulate static charges due to friction, primarily from stylus drag during playback and when removing the record from the jacket and sleeve. This static buildup can lead to unwanted pops, crackles, and distortions in the audio. The HumminGuru Orbit Vinyl Record Static Remover provides a hands-free solution, essential for audiophiles seeking smooth record playback and an enhance listening experience. With its pioneering "rotating" design, the Orbit offers a highly effective way to neutralize static electricity by emitting + /- ions directly onto the record surface during rotations. By simply pressing the start button, and the Orbit will perform 10 rotations, delivering a clearer record free from electrostatic noise. Portable and convenient, the Orbit is a great tool to use before each playback, ensuring a remarkable audio journey with its exquisite sound quality.

Automatic Design

With a simple press of the start button, the Orbit will automatically rotate on the record platter for 10 cycles and stop once the static removal process is completed.

Positive and Negative Ion Discharge

Equipped with two sets of Plasma output and a high-speed fan, the Orbit discharges over 50 million pcs of each +/- ions per cubic centimetre. Situated 23mm above the record, the Orbit effectively eliminates static from the record surface.

Required Space

The Orbit requires an unrestricted space on a turntable platter with a minimum diameter of 326 mm (approx. 12.83 inch) for rotation.

Rechargeable

The Orbit can be recharged with the provided USB-C cable and each charge can use up to =100 uses. The battery indicator lights serve as a reminder of the power status.

Turntable Requirement:
Require a rotation space with a diameter of 326 mm (12.83 inches).
The spindle height with the applied record shall not exceed 11mm.


Inside the package: HumminGuru Orbit, Cleaning Brush x 1, USB-C Charging Cable, Owner's Manual

Notes: Black Special Edition Inner Sleeves | Made from Heavyweight & Acid Free Paper

Black Inner Record Sleeves

Protect Your Record Collection in Style with Black Inner Sleeves

As record aficionados themselves, Big Fudge knows how crucial record collection maintenance is in order to preserve your vinyl's quality and longevity. When you love a record dearly it's only natural that with enough rotations that the cover and sleeves will begin to fold and flap obnoxiously. Add a stylish flair to your records with our new black inner sleeves. These have a sleek and stylish design while preserving your favorite music at the same time.

Contemporary Storage Solutions for Your Classic Albums

Big Fudge provides unrivaled protection for your record collection. Enjoy the matte black design with thick protection from daily wear and tear. Protecting and collecting your records is simple with black inner sleeves that are made to help you enjoy your records for decades.

Notes: Killer value from DJ brand Reloop. Classic SL1200-inspired design with solid build quality, accurate sound reproduction plus modern features like a 50% pitch option and reverse button.

Supplier's notes:
With the RP-7000 MK2, Reloop has built a turntable that caters to the high demands of professional DJs and modern nightclubs. With its powerful direct drive motor and rugged construction we were able to develop a sturdy and indestructible turntable that can take on harsh everyday life with ease.

Sturdy Casing Construction:

By using a combination of metal, rubber and synthetic materials, the RP-7000 MK2's housing is more reinforced and heavy than ever before. This results in a turntable that is extremely resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality deep black or classic silver metallic finish.

Balanced S-Shaped Tone Arm with Upgraded Tone Arm Base:

The RP-7000 MK2 features a statically balanced S-shaped tone arm with hydraulic lift and anti-skating mechanism. The newly developed tone arm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tone arm comes with a universal connection for pick-up cartridge systems (SME).

Dual Start/Stop Buttons, Precise Motor Control and Reverse Function:

As well as the above technical innovations, the RP-7000 MK2 is equipped with a few functions that will make any DJ's life much easier. The newly developed aluminium LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has also been integrated to facilitate a vertical setup (battle position) and by using the buttons on the RP-7000 MK2's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.

High-Resolution Pitch Section with Digital Fader:

Using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range +/-8%. However, the RP-7000 MK2 is also cable of a wider, DJ-friendly +/- 16% pitch range and a massive +/-50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).

High-Quality Connections and Integrated Phono Pre-Amp:

Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage.

Powerful Motor with Extensive Adjustment Possibilities:

The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. This makes it an extremely smooth running turntable with wow and flutter of just 0.01% WRMS*. Furthermore, the turntable break speed (platter stop) can be adjusted from 0.2 - 6 seconds and the precision-machined, heavy die-cast aluminium platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.

Notes: Presenting Decksaver's Pro Mixer Cover.

The Decksaver covers are a unique must have for clubs and bedroom DJs alike. They are essential for protection, reducing the risk of damage caused by dust and impact when not in use. Designed and manufactured in the UK, the Decksaver covers fit securely round your deck, mixer or midi controller ensuring its sexy design is not hidden. Unlike acrylic covers that were prone to cracking, the Decksaver covers are produced using the best quality plastic available; Polycarbonate which is a major component used in the construction of bulletproof-glass. These original and high quality covers have been recommended by clubs, bars and DJs worldwide.

Notes: The Groovewasher Mondo Record & Stylus Care System

Groovewasher's top-of-the-line record and stylus care system. Elegant and effective.

Groovewasher's walnut products are solid chunks of 40 year old Black Walnut trees. Every one is unique. Some may have small surface cracks, splits or knots. This is the character of the wood, not a craftsman's mistake.

Notes: The elegance and luxury feel of real American hardwood that cannot be matched. GrooveWasher's handcrafted Walnut Record Cleaning Kit cleans your vinyl records with beauty, style and ease.

This bundle includes:

Solid milled 5 inch American Walnut handle with a hand rubbed waterproof oil polyurethane finish
Replaceable Microfiber Cleaning Pad. Easy removal for cleaning or replacement.
G2 Record Cleaning Fluid Mist Spray (4 oz)
Record Label Protector Mask

"I have been using this cleaner since it was released...the results are amazing! This is a must for any record collector and would recommend this to anyone looking for the best way to clean their vinyl records! GrooveWasher...or nothing for me!" Christopher Burns

"Hands down, the best record cleaner on the market." Levi E.

"If you enjoy music from a physical medium, you must take care of it." Alex Chase

GrooveWasher Solid Walnut Wood Handle Design

The GrooveWasher walnut handle is milled from a single solid piece of midwest premium American Black Walnut, hand finished by wood artisans with waterproof oil polyurethane in Groovewasher's plant in Kansas City, Missouri, USA. Feel the woodgrain!

NOTE: Every one of Groovewasher's walnut products is unique. Some may have small surface cracks, splits or knots. This is the character of the wood, not a craftsman's mistake.

G2 Record Cleaning Fluid

The GrooveWasher G2 Record Cleaning Fluid is the result of years of research and testing. The selection of ingredients was guided by the formulations of the D series fluids of the 1970s. G2 Fluid is designed for maximum cleaning effectiveness of the delicate vinyl surface and microgroove, without the need for rinsing. Anti-static action on contact. Honest cleaning to release the honest sound of the recording.

High Tech G2 Fluid Contains:

Surfactants: State of the art detergents dissolve and suspend fingerprints and other oily grime.
Super wetting agent: A specialty chemical that reduces the G2 Fluid's surface tension to reach the bottom of the groove. When you spray G2 Fluid on a record you can see it spread down the grooves.
Emulsifiers: Holds the oils, dirt, mildew and microdust particles in suspension. Then the microfiber fabric cleaning pad wipes and pulls the dirt-filled solution from the record surface.
Laboratory grade, double deionized, carbon filtered & UV treated water: Carrier for the active cleaning ingredients. Eliminates static electric charges on the record's surface on contact.

Replaceable Cleaning Pad Design

The GrooveWasher replaceable microfiber cleaning pad features a super absorbent black terry style split microfiber cover. (Other replacement pad styles are available for separate purchase.) This fabric is effective in removing the contaminants borne in the G2 Fluid from the record's microgroove.

The pad is secured to the walnut handle with low profile hook & loop velcro. This allows the pad to be removed from the walnut handle to be washed or replaced. These cleaning pads are hand made by Groovewasher's textile artists in Kansas City.

Notes: High quality audio leads for exceptional sound quality and reliability. High grade twin cable comprises an insulated pure copper core and global shielding. The durable PVC sheath has a soft texture to avoid knotting. Terminated at each end with a pair of RCA phono plugs.

Cable diameter: twin 5mm O (5 x 10mm)
Conductors: 12 strand, 0.1mm pure copper
Connectors: 4 x RCA phono plug.

Notes: The Milty Pro Zerostat 3 is effective at neutralizing static charges on virtually any surface without the need of sprays.

The Zerostat 3 is highly rated for its ability to improve the sound quality of records and CDs by removing static. The Zerostat 3 incorporates a unique Piezo Crystal device which generates a positive electrical charge of Ions with a gentle squeeze of the trigger, and a negative charge on the material. Constructed from a durable hard plastic, it requires no batteries or refills and is a long lasting alternative to cleaning brushes.

Notes: ATN95E Replacement stylus for AT95E cartridge - Compatible with AT93 cartridge and Compatible with AT95 cartridge

Replacement stylus for AT95E cartridgeThe ATN95E is also compatible with discontinued models AT93 and AT95.

Notes: Hotly anticipated rotary goodness from Spanish pro audio specialists Ecler. Simple, pure two-channel design with three-band channel EQs, three-band isolator and quality sound.

Supplier's Notes:
Two-Channel Analogue Rotary Mixer

WARM2 is a professional two-channel analogue rotary DJ mixer, designed and manufactured by ECLER in Barcelona. Featuring two phono/line channels and a micro/line channel, classic sharp filters, a 4th order Isolator and a narrow portable format, it will deliver a warm and crystal clear analogue sound.

Audio Performances

Inputs Sensitivity nom/Impedance:

LINE : 0dBV/50kO
PHONO : -40dBV/50kO
MICRO : -50dBV/>1kO
FX RETURN : 0dBV/>6kO

Outputs Level/Minimum Load:

HOUSE (BAL) : 0dBV/600O 1V *(+12dB 4V)
HOUSE (UNBAL) : 0dBV/2.2kO 1V *(+12dB 4V)
BOOTH (UNBAL) : 0dBV/2.2kO 1V *(+12dB 4V)
REC : 0dBV/10kO
HEADPHONES : 200mO/200O THD 1%
FX SEND : 0dBV/2.2kO

Frequency Response:

LINE : 10Hz#30kHz -1dB
MICRO : 10Hz#25kHz -1dB
PHONO : RIAA i0.5dB
FX RETURN : 10Hz#50kHz -1dB

THD-N:

LINE : <0.006%
MICRO : <0.9%
PHONO : <0.08%
FX RETURN : <0.005%

CM MR:

MICRO: >70dB @ 1kHz

Signal Noise Ratio:

LINE: >99dB
MICRO: >85dB
PHONO: >98dB
FX RETURN: >100dB

Max Undistorted Output Level:

HOUSE (Electr.BAL): 21dBV (23dBu)
HOUSE (UNBAL): 21dBV (23dBu)
BOOTH (UNBAL): 21dBV (23dBu)

Trim control:

INPUTS 1-2: - 15dB
INPUT 3: - 20dB

Tone control Inputs 1-2:

BASS: +10/-30dB
MID: +10/-25dB
TREBLE: +10/-30dB


Tone control Isolator:

BASS: +12/-70dB
MID: +12/-40dB
TREBLE: +12/-70dB

Tone Filter cut frequency at -6dB (slope 12dB/oct):

BASS: 200Hz
MID: 200Hz#6.8kHz
TREBLE: 6.8kHz

Isolator cut frequency at -6dB (slope 24dB/oct):

BASS: 300Hz
MID: 300Hz#4kHz
TREBLE: 4kHz

Connectors

Inputs:

LINE 1-2-3: RCA STEREO
PHONO 1-2: RCA STEREO
MICRO 3: 6.3mm TRS BAL. JACK
FX RETURN: RCA STEREO

Outputs:

HOUSE (BAL): XLR STEREO
HOUSE (UNBAL): RCA STEREO
BOOTH: RCA STEREO
FX SEND: RCA STEREO
REC: RCA STEREO
HEADPHONES: 6.3mm/3.5mm STEREO JACK

Miscellaneous

Control Mode: Rotary with Alps Blue Velvet Potentiometers
Phantom Voltage: 18VDC/5mA Max (Default ON)
MIX and PFL VU-Meter: LED 12 segments (-30dBV # +20dBV)

Operation

Operation Temperature: -5-C - 45-C / 23-F - 113-F
Humidity: 20 - 90% RH (no condensation)

Supply

Mains voltage: 90-264VAC 47-63Hz
Rated power consumption: 30VA

Mechanical

Dimensions (without wooden sides): 400 x 185 x 100mm / 15.7" x 7.2" x 3.9"
Weight : 3.6Kg / 7.94 lbs

Notes: High quality stereo audio lead with lightweight 3.5mm stereo jack ideal for mp3 players or mobile devices, terminated to 2 x mono jack plugs for stereo feed into mixing console or stereo amplifier.

Notes: Good quality all-metal center adapter.

Notes: Inner sleeve for 12" vinyl records.

Notes: Even if you use your GrooveWasher to clean your records, room dust, lint and cat hair can accumulate on your stylus. Your stylus will "plow" out any debris that isn't removed from a record cleaning.

We sourced and tested dozens of brush styles, handle types and bristles. Straight "pencil" brushes. Artist camel hair brushes. Toothbrush styles. Mascara brushes.

We preferred a 90 degree angle. Long bristles so the brush can clean the underside of the cartridge as well as the stylus. Dense bristles to pull off gunky coatings but soft to avoid damage to the stylus or cantilever. Those are the effective cleaning features of our new stylus brush. This brush can be used dry or with a couple of drops of SC1 Fluid.

This kit includes our SC1 Stylus Fluid. It's a cousin of our G2 Fluid with a bit more organic alcohol. The stylus can become clogged with oily pressing release compound from new records and residue from other record cleaning and preservative fluids. SC1 Stylus Fluid dissolves these contaminants and the SC1 Brush removes them.

Note: Hard surface cleaning fluids like G2 and SC1 can be irritating to skin and eyes. Avoid contact with your eyes. Flush with clean water. Keep all cleaning products out of the reach of children.

Notes: The Vinyl Tonic 7" Storage Case is the perfect storage solution for all of your precious vinyl. The storage case can hold up to x35 7" vinyl records and has a stylish design with a sturdy shaped handle. The storage case is constructed from aluminium, steel and wood, with reinforced steel corners for added durability and a front latch to keep your records safe and secure. The case also has a fully lined interior, all designed to keep your vinyl records from damage. The storage case also comes with a free microfibre cloth to keep your vinyl records clean and sounding their best.

Box contents:

x1 7" vinyl record LP storage case (black)

x1 30cm x 30cm microfibre cloth

Notes: The Vinyl Tonic 7" Storage Case is the perfect storage solution for all of your precious vinyl. The storage case can hold up to x35 7" vinyl records and has a stylish design with a sturdy shaped handle. The storage case is constructed from aluminium, steel and wood, with reinforced steel corners for added durability and a front latch to keep your records safe and secure. The case also has a fully lined interior, all designed to keep your vinyl records from damage. The storage case also comes with a free microfibre cloth to keep your vinyl records clean and sounding their best.

Box contents:

x1 7" vinyl record LP storage case (black)
x1 30cm x 30cm microfibre cloth

Notes: Blank Album Jackets, White, 20x 12 Inch LP Vinyl Covers

Vinyl Is Forever

... That is if you take good care of it! Big Fudge is the leading brand in the protection, storage, and display of vinyl records - like this set of 20 Glossy Black Album Covers!

It's Time to Replace Those Sad Old Vinyl Jackets

You, and those who came before you, loved those albums so HARD the jackets are now tattered. So replace them with blank album covers that let you spend less time with the sticky tape and more time listening to perfectly protected tunes. Unlike other jackets with thin spines that bunch up your sleeves, these jackets let you write ON the spine and keep the sleeves smooth and flat.

20 Blank Jackets for 12" Vinyl
350gsm Thick Glossy White Cardboard - Acid-Free
Compatible With Standard 12" Inner and Outer Sleeves
3.5mm Spine To Label Your Albums with Thin Chalk Market

Fits Your Favourite Sleeves

These Covers fit 12" albums like a hug from Tony Bennett. Some jackets make inner sleeves bunch up, but Big Fudge covers let plastic or paper sleeves slide in like a dream and then fit snugly to prevent them from falling out.

Add Your Artwork

Thin spines are annoying. But these jackets have a 3.5 mm thick spine, so you can label it. The front lets you glue or sticker art and then slide it into your outer sleeve. Use thin chalk markers that require a solvent to remove.

20x black Jackets

Your order includes 20 vinyl covers. Acid-free, 350 gsm glossy black cardboard jackets with the same quality you expect from Big Fudge. These will fit all your vinyl, even 180g pressings.

They've Had a Hard Life

You've dragged them around town, listened to them a million times, or found them already pre-loved and worn-out; now give them a new start at life with these Album Covers from Big Fudge - the brand that thousands of vinyl fans love and trust.

Notes: Universal isolation foot pads for turntables, isolate your turntable from external vibrations.

This product comes in a pack of 8 pads, enough for 2 turntables.

Notes: The Tonar N44-7 Stylus is a replacement white stylus for the Shure M44-7 Cartridge. This stylus has been manufactured to the same standard as the original. Engineered for scratch DJ's and turntablists, the N44-7 is designed not to skip under even the most demanding circumstances. The Tonar N447 White features a diamond tip stylus making them perfect for DJ'ing and general vinyl play.

Key features:

White replacement stylus for Shure M44-7
Manufactured to same standard as the original
Engineered for scratch DJ's and turntablists
Diamond tip stylus perfect for DJ'ing and general vinyl play

Notes: Blank Album Jackets, White, 20x 7 Inch LP Vinyl Covers

Vinyl Is Forever

That is if you take good care of it! Big Fudge is the leading brand in the protection, storage, and display of vinyl records - like this set of 20 Glossy White Album Covers!

It's Time to Replace Those Sad Old Vinyl Jackets

You, and those who came before you, loved those albums so HARD the jackets are now tattered. So replace them with blank album covers that let you spend less time with the sticky tape and more time listening to perfectly protected tunes. Unlike other jackets with thin spines that bunch up your sleeves, these jackets let you write ON the spine and keep the sleeves smooth and flat.

20 Blank Jackets for 7" Vinyl
350gsm Thick Glossy White Cardboard - Acid-Free
Compatible With Standard 7" Inner and Outer Sleeves
3.5mm Spine To Label Your Albums with Thin Chalk Market

Fits Your Favourite Sleeves

These White Covers fit 7" records like a hug from Tony Bennet. Some jackets make inner sleeves bunch up, but Big Fudge covers let plastic or paper sleeves slide in like a dream and then fit snugly to prevent them from falling out.

Add Your Artwork

Thin spines are annoying. But these jackets have a 3.5 mm thick spine, so you can label it. The front lets you glue or sticker art and then slide it into your outer sleeve. Use thin chalk markers that require a solvent to remove.

Your order includes 20 vinyl covers. Acid-free, 350 gsm glossy white cardboard jackets with the same quality you expect from Big Fudge. These will fit all your vinyl, even 180g pressings.

They've Had a Hard Life

You've dragged them around town, listened to them a million times, or found them already pre-loved and worn-out; now give them a new start at life with Big Fudge's Black and White Album Covers from Big Fudge - the brand that thousands of vinyl fans love and trust.

Notes: Reloop's next-generation interface is the go-to for connecting turntables and media players to Serato, offering three stereo inputs and three stereo outputs. Studio-quality 24-bit / 96 kHz conversion and built-in USB-A hub.

Supplier's Notes:
Back to the music

The Reloop Flux is a next-generation USB-C interface for using Serato DJ Pro with turntables, CDJs or other media players. The interface boasts superior audio qualities, a well-designed operating concept and a club-ready design. It can transform any conventional mixer into a professional digital vinyl system.

Maximum flexibility

Three stereo inputs provide DJs with maximum flexibility. Turntables, CDJs and similar can be used in any combination. The settings are adjusted using discreet DIP switches, which virtually eliminates any chance of accidental switching in the club. The interface includes three stereo outputs, including an AUX out that can be routed to Serato's internal sampler. Gold-plated, corrosion-resistant RCA jacks ensure high-quality audio transmission.

Full control

The Flux provides the best possible routing overview thanks to clearly visible signal flow LEDs for all inputs and outputs and a Thru status indicator. Connection status (hub, PD, DC) LED indicators on the top of the interface provide additional control options. The Direct Thru buttons on the top of the interface enable you to quickly and easily activate and disable Thru mode, which allows connected turntables and CDJs to be used conventionally. Navigation through the Serato software is no longer necessary.

Hub inside

The Flux includes a built-in 2-port USB-A hub for connecting MIDI controllers and other USB accessories. Aside from the expanded connection options, the hub reduces potential connection faults in a busy club environment by keeping the setup connected even without the laptop.

Studio quality - anytime, anywhere

The Flux offers studio quality in the club and wherever it's needed with 24-bit/96 kHz, high-quality digital/analogue converters and ultra-low latency. For this reason, it's a superior DVS interface which could also be used as an audio interface in the studio.

Always powered

The Flux is bus-powered by a computer, so there's minimal wiring required for audio and power cables. The DVS interface can also be powered by external power sources through the USB-C DC input, allowing turntables and CDJs to be used in Thru mode even without a computer connected. The Flux's second USB-C port provides Power Delivery support for other USB-C devices (max. 60 W), such as a MacBook.

Robust & roadworthy

The interface has a durable metal housing with a scratch-resistant, black surface, ensuring a long service life even with heavy use. The extended edge design keeps the connections well-protected.

Plug & play for Serato DJ

The Reloop Flux unlocks the full version of Serato DJ Pro and Serato DVS. This means DJs can get up and running with the market-leading digital vinyl system in no time. Additional licences are not necessary.

Features:

3-channel (6x6 in/out) USB-C DVS interface for Serato DJ Pro
Turn any mixer into a professional digital vinyl system
Unlocks full version of Serato DJ Pro and Serato DVS
Studio-grade 24-bit sound card with crystal-clear audio and ultra-low latency response
Supports up to 96kHz with high-quality D/A converters for superior audio processing
Also functions as a stand-alone studio interface for recording and playback audio
3x inputs for turntables, CD players or AUX-In for live feed signal, switchable in any combination via dedicated dip switches
Dedicated GND terminal for grounding turntables
Gold-plated, corrosion-resistant audio connections
3x line outputs, including AUX-Out, assignable to the Sampler
Easy, accessible direct thru buttons for analogue deck playback
All terminals are visible from the top of the unit for easy installation in dark surroundings
Bus-powered cable connection for power and audio
Optional USB-C DC in port for external power supply
Power delivery support for USB-C devices (max 60W)
Signal-flow LEDs for all inputs and outputs (L/R) and thru indication for clear visibility
Power LEDs on the top panel for connection status (Hub, PD, DC)
2-port USB-A hub for connecting further accessories
Rugged, heavy-duty metal housing with a scratch-resistant black finish for durability on the road and reliability in the club
Highly robust, extended edge design to protect connection terminals
Supports the use of Serato NoiseMap™ control vinyl (not included) or custom control signal WAV file for use via CDs or USB drive (download available) with no additional license purchase needed
Including: 2x RCA audio cables, 1x USB-A to USB-C, 1x USB-C to USB-C, user manual

Technical Data

Power:
USB bus powered: Yes
Recommended power: 2 A or higher / minimum power: 400 mA
Maximum USB-PD throughput: 60 W
Maximum USB Hub power output: 2 x 0.8 A = 8 W
Supported external USB (type A or C) power supply: 5 V/1 A - 20 V/3 A
Power supply priority: FLUX self-power -> USB Hub -> PD (to PC)

Audio:
S/N Ratio (output reference level 1 kHz, +4 dB):
- Deck In (LINE signal input: 0 dBV): More than 83 dB
- Deck In (PHONO signal input: -32 dBV): More than 73 dB
THD + N:
-LINE signal input: -4 dBV @1K / Less than 0.03% (1 kHz,+0 dB)
-PHONO signal input: -36 dBV @1K / Less than 0.05% (1 kHz,+0 dB, Inverse RIAA)
Maximum Gain:
- Deck In (LINE): +4 dB i 2 dB
- Deck In (PHONO): +36 dB i 2 dB
Maximum Input (1 kHz, THD=1%):
- Deck In (LINE): More than +7 dBV
- Deck In (PHONO): More than -25 dBV
Maximum Output (1 kHz, THD=1%):
- Deck Output: More than +11 dBV

USB:
USB audio interface with 24 bit/44.1 kHz, 48 kHz, 96 kHz
USB 2.0 high-speed (480 Mbit/s)
Class-compliant on macOS
USB Power Delivery Protocol 3.0

General:
Dimensions (W x D x H): 160 x 120 x 34 mm
Weight: 0.85 kg
Accessories: User Manual, 1x USB type C/C cable, 1x USB type C/A cable, 2x RCA cable bit

Notes: With the Spin-Cleanr MKII standard unit and included accessories, you're ready to begin removing the grime from your grooves.

Whilst there are cheaper record cleaning brushes available on the market, the Spin Clean Record Washer system is by far the best in terms of removing dust, fingerprints and static from your LP records.

The kit comprises fluid bath, a 4oz bottle of cleaning fluid, lint-free drying cloths, 1 pair of brushes, 1 pair of rollers and an instruction manual.

Spin Clean Record Washer System Mk II achieves amazingly effective cleaning power of records due to the special cleaning fluid that grabs hold of the dirt and makes it sink to the botton of the fluid tank, ensuring that your records remain uncontaminated during the cleaning process. Both sides of the record are sleaned at the same time by the Spin Clean Record Washer System Mk II.

The cleaning process is as follows: fill the bath with cleaning fluid, Spin the record three times, then dry off the record with the lint free cloths. Simple and effective. There are no power requirements for the Spin Clean Record Washer System Mk II.

Notes: This tape head cleaner easily cleans and demagnetizes heads and rollers. It demagnetizes your system by using a spinning magnet, which removes remnant magnetic field or polarity that can distort playback. At the same time, the cleaning tape buffs the heads and rollers. This head cleaner can be used for home, portable and car cassette systems.

Before inserting the Vinyl Styl Audio Cassette Head Cleaner/Demagnetizer into your tape player:

- Apply 5-6 drops of cleaning fluid onto the tape through the slot in the front window
- Insert cassette into your deck
- Press play
- Allow the tape to run until the tape stops
- Remove from deck
- You're done. Sit back and enjoy the music

Package contains:

2 x 20ml bottle of tape head cleaning fluid
1 x Cleaning tape

Notes: Indispensible for any DJ and vinyl lover: This puck adapter is necessary in order to play 7" records and suitable for all turntables

Notes: It's clear that Pioneer DJ has once again raised the bar yet again with their latest DJ controller: the DDJ-FLX10. This versatile piece of equipment, boasts exceptional sound quality and an array of features that cater to the needs of both professional and amateur DJs.

With a layout that emulates a professional DJ setup, the DDJ-FLX10 features a 4-channel mixer and full-size jog wheels that provide a tactile and responsive feel, making it easy to scratch and manipulate tracks. It also comes equipped with a variety of input and output options, including XLR, RCA, and TRS connectors, as well as a built-in sound card that delivers high-quality audio processing.

But as with any high-end piece of music equipment, it's essential to protect your investment from any potential damage. That's where Decksaver comes in.

Designed specifically for the DDJ-FLX10, this cover is made from ultra-durable polycarbonate material that provides exceptional protection against spills, knocks, dust, and other harmful elements.

With a Decksaver cover, you can rest easy knowing that your DJ controller is protected from any potential harm.

Dimensions

Weight 1.2 kg
Length: 72 cm
Width: 39.5 cm
Height: 4.2 cm