Applied Research & Technology

Notes: Make your professional audio devices Bluetooth compatible with the ART BT-DI, a rugged and flexible Bluetooth Audio DAC. The BT-DI is designed to provide a reliable Bluetooth interface from computers, phones, and legacy Bluetooth devices to any installation. Working as a remote extension of your mixer and mic outputs, the BT-DI utilizes phantom power, so an external power supply is not required.

Key Features

Bluetooth 5.0 receiver
External antenna for long-range operation
Transformer isolated XLR outputs
Headphone out
Selectable fixed/external USB supply OR Phantom Power
Headphone can be summed Mono
Compact rugged package, extruded chassis
Designed and developed in the USA

Specifications

Main Output Connections: XLR (2) main output, transformer coupled, switchable ground.
Main Output Impedance: 300 Ohms.
Maximum Output Level: 30 dBu balanced Main output, 0 dBu Headphone output.
Signal to Noise Ratio: -90dB unweighted typical.
THD: <0.05% typical
Bluetooth Version: 5.0, up to 50m, Class 2 device (BDR/EDR)
Supported Audio: CODEC's SBC, AAC
Power Requirements: 5V USB (80ma) or +48V
Phantom power w/both XLR's connected.
Dimensions (H x W x D 1.6-inch x 5.0-inch x 5.5-inch (36 x 126 x 140 mm)
Weight: 2.0 lbs. / 0.91 kg

Notes: Convert turntable outputs to line level with this simple but high quality pre-amp, suitable for DJ or hi-fi use. Switchable moving coil/moving magnet settings allow the Precision Phono Pre to work with most cartridges.

Supplier's Notes:
ART is proud to introduce the Precision Phono Preamp for those seeking to connect their turntable to PA or stereo in one quick and easy step. This standalone phono preamp interfaces both types of turntable cartridges Moving Coil (MC) and Moving Magnet (MM) to a wide variety of audio systems.

The Precision Phono Preamp's extraordinarily low noise amplifier allows connection to MC cartridges without picking up noise or distortion that transformers can exhibit. The audio is kept pristine with a low-cut filter to remove rumble and low frequency feedback, commonly undesirable for DJ's and home use.

Analogue inputs on the ART Precision Phono Pre amp are switchable between Moving Magnet and Moving Coil. The unit changes both the gain and the cartridge loading to suit the selected cartridge. The front gain trim control with the signal present/clip LED allows the user to optimize the output for a wide range of cartridges.

Specifications

Input Connections: Gold plated RCA jacks 47k / 100pf (MM) or 25/100 Ohms (MC, switchable)
Output Connections Gold plated RCA jacks, 100 Ohms
Max Input Level: 440 mV (1 kHz, MM mode) / 44mV (1kHZ, MC mode)
Max output level: 6V RMS / +18dBu
Maximum Gain: 43dB (MM)/63dB (MC)
Frequency Response: 20 Hz - 20 kHz, +/-0.5dB
Low Cut Filter: 22Hz, 2pole
THD: <0.0010% {typical}
E.I.N: 346nV, -127dBu
Chassis Type All: aluminium black anodized with integral rubber sides

Power Requirements

Input: 100-240V AC~50/60Hz
Output: 12V DC @ = 800 mA
Dimensions (HWD): 1.87-inch x 4.61-inch x 4.27-inch / 47.5mm x 117mm x 108mm
Weight: 1.89 lbs., 0.86 kg

Note: 0 dBu = 0.775Vrms

Notes: Everything you need from a hardware pre-amp. Clean and clear transistor amp or warm and juicy valve amplification, suitable for any mic or sound source. Top quality stuff at a great price.

Supplier's Notes:
The Solo MPA Multi-Voice Tube Preamplifier allows users to blend between a pristine low-noise/low-distortion solid-state transistor circuit and a warmer Class-A tube mic preamp.

The flexible EQ controls allow users to voice the Solo MPA to create their signature sound. Featuring 48V phantom power and a variable input impedance control, users can tailor the Solo MPA to suit their microphone of choice, be it a high-quality dynamic, a studio-grade condenser, or a low-level ribbon

The Solo Series of single-channel rackmount units have been developed for the recording enthusiast with a preference for simplicity.

Specifications

Frequency Response: 15 Hz to 50 kHz (+0, -1dB)
Dynamic range : >110dB ("A" weighted)
CMRR : >90dB THD <0.005% (typical
Equivalent Input Noise: -129dBu (XLR, "A" weighted)
Maximum Input Level : +19dBu (XLR)
Maximum Instrument Input : +17dBu
Input Impedance: 600-80K ohms adjustable (XLR), >800k ohms (Instrument), +27dBu (XLR)
Output Impedance : < 47 ohms (XLR)
Maximum Gain: 75dB
Meter Calibration: 0VU = +4dBu output (+4dBu mode) 0VU = -10dBV output (-10dBV mode)
Low Cut Filter : Single pole,10-200Hz adjustable
Tilt EQ: +/- 12dB adjustable
Power Requirements: 100-120V 60 Hz / 220-240V 50Hz
Dimensions: (HxWxD) 1.75-inch x 19-inch x 6.0-inch / 4.45 cm x 48.3 cm x 15.2 cm

Weight: 5.6 lb / 2.5kg
Box Dimensions: (HxWxD): 5" x 20.4" x 7.44" / 12.6 cm x 51.8cm x 18.9cm
Note: 0 dBu = 0.775Vrms

Notes: The ARTcessories TPatch is a compact 8-point balanced patchbay that organises your cables into a convenient central location on your studio desktop. Designed for maximum flexibility, the TPatch has 1/4" TRS phone connectors user selectable normal and half-normal modes.

The compact black-anodized all aluminum case and it's passive design allow the TPatch to provide years of trouble free service.

The specifications:

Connectors: 1/4" TRS balanced phone jacks
CMRR: > -90 dB (typical)
Isolation: > -80 dB (typical)
Dimensions (mm): 47 H x 117 W x 99 D
Weight: 0.38kg

Connectors: 1/4" TRS balanced phone jacks
CMRR: > -90 dB (typical)
Isolation: > -80 dB (typical)
Dimensions: 47mm x 117mm x 99mm
Weight: 0.38kg.