Applied Research & Technology

Notes: The DUAL LIMITER has a unique design that will enhance the sonic textures of your audio system for years to come. Developed in partnership with studio and live-sound engineers, the DUAL LIMITER is very musical.

The heart of the Dual Limiter is a unique PWM gain control circuit. Combined with its intelligent detector, the result is a Classic sounding compressor/limiter without the traditional nose and distortion artefacts.

The DUAL LIMITER may be used as either a compressor or a limiter with all of the following:

- Multitrack or analogue recording device
- In a mixer's channel insert points
- Between a microphone preamp and signal processors
- Between pre-amplified electronic musical instruments (synthesizers, guitars, bass, samplers, acoustic instruments with pickups) and other line-level equipment

Notes: The Pro VLA II is a tube driven Vactrol-based compressor/leveling amplifier designed to excel in any professional audio environment. Superior performance and an incredible tone makes the Pro VLA II and indispensable tool for tracking, mixing, mastering, dynamic control of live sound sources or for use in broadcast audio.

Capable of delivering a far more musical natural sounding and sonically transparent compression than competitive units in its class, the Pro VLA II uses an Opto-electronic circuit rather than the more typical design VCA driven level detection circuit. This VCA-less design coupled with a 12AT7 vacuum tube in the gain stage makes the Pro-VLA II the ideal dynamic control device for critical audio applications.

Exceptional signal integrity with extremely low noise and low distortion is achieved in the Pro VLA II by utilizing a transformerless design throughout.

Unlike typical compression units that use Voltage Controlled Amplifiers (VCA's) to handle level detection, the Pro VLA II's Opto-electronic design allows a far more transparent and musical sounding compression without sounding aggressive or un-natural. This Vactrol based optical electronic circuitry is the basic component of the classic highly sought after compressors of past.

The Vactrol design allows the Pro VLA II to react to audio signal in much the same way the eye naturally adjusts to fluctuations in light levels, smoothly, quietly and almost imperceptibly.

The Pro VLA II is a soft knee leveling amplifier by design. Although capable of providing dramatic compression effects, the Pro VLA II was designed to excel in any application where transparent, expressively musical dynamics control is desired.

Large highly visible backlit analog VU meters accurately display input and output levels while extremely fast 10-segment LED's display gain reduction. For added functionality, the LED's display either average level for mastering & mixing applications or peak hold for monitoring individual sources when tracking audio.

XLR and 1/4" TRS balanced inputs and outputs are provided to ensure the Pro VLA II can connect with any audio source or hardware. A +4 dBu/-10 dBu mode switch optimizes the Pro VLA II I/O for either consumer or professional equipment.

Notes: ***B-STOCK: Box opened, product in perfect working order***


The Pro VLA II is a tube driven Vactrol-based compressor/leveling amplifier designed to excel in any professional audio environment. Superior performance and an incredible tone makes the Pro VLA II and indispensable tool for tracking, mixing, mastering, dynamic control of live sound sources or for use in broadcast audio.

Capable of delivering a far more musical natural sounding and sonically transparent compression than competitive units in its class, the Pro VLA II uses an Opto-electronic circuit rather than the more typical design VCA driven level detection circuit. This VCA-less design coupled with a 12AT7 vacuum tube in the gain stage makes the Pro-VLA II the ideal dynamic control device for critical audio applications.

Exceptional signal integrity with extremely low noise and low distortion is achieved in the Pro VLA II by utilizing a transformerless design throughout.

Unlike typical compression units that use Voltage Controlled Amplifiers (VCA's) to handle level detection, the Pro VLA II's Opto-electronic design allows a far more transparent and musical sounding compression without sounding aggressive or un-natural. This Vactrol based optical electronic circuitry is the basic component of the classic highly sought after compressors of past.

The Vactrol design allows the Pro VLA II to react to audio signal in much the same way the eye naturally adjusts to fluctuations in light levels, smoothly, quietly and almost imperceptibly.

The Pro VLA II is a soft knee leveling amplifier by design. Although capable of providing dramatic compression effects, the Pro VLA II was designed to excel in any application where transparent, expressively musical dynamics control is desired.

Large highly visible backlit analog VU meters accurately display input and output levels while extremely fast 10-segment LED's display gain reduction. For added functionality, the LED's display either average level for mastering & mixing applications or peak hold for monitoring individual sources when tracking audio.

XLR and 1/4" TRS balanced inputs and outputs are provided to ensure the Pro VLA II can connect with any audio source or hardware. A +4 dBu/-10 dBu mode switch optimizes the Pro VLA II I/O for either consumer or professional equipment.

Notes: The SC2 is a highly sophisticated and flexible dynamics processor designed for easy operation and great tone. The unit can be adjusted to provide anything from smooth subtle compression to hard limiting. Noise reduction is provided by a fast solid gate or a subtle expander.

The Attack and Release functions allow the user to set the general operating range and then automatically adapt to the audio being processed. A full auto mode is also available. The ultra-precise LED meters while two LED meters clearly display the gain reduction for each channel.

Notes: The VLA-500 brings the same VCA-less Vactrol based compression circuit used in ART's legendary Pro-VLA, putting to a convenient 500 Series format for the first time. Capable not only of delivering incredibly smooth compression and overall dynamic control, the VLA-500 also offers two user selectable tone shaping circuits making it one of the most versatile signal processors in your 500 Series rack.

The 'Punch' circuit is a J-FET Harmonic Enhancer that adds even-order harmonic distortion for a fuller, "punchier" tone while taming nasty peaks that may escape the Vactrol. The Grit circuit adds frequency-dependent signal distortion to make any track truly stand out. This is a highly creative effect that can work especially well on drums and percussion, solo brasses and woodwinds and even vocals when added presence and position in a mix is required. Bypassing both 'Punch' and 'Grit' circuits delivers the purest Opto-compressor tone, perfect for critical solo instruments and clean vocals. 'Punch' and 'Grit' circuits can even be combined for additional tone shaping options.