Audio Technica

Notes: The AT-HS6 is a universal 1/2"-mount headshell for 4-pin turntable cartridges. It features an ultra-lightweight (9 g) aluminium die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus placement. The headshell is also equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws.

Notes: The AT-HS6 is a universal 1/2"-mount headshell for 4-pin turntable cartridges. It features an ultra-lightweight (9 g) aluminium die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus placement. The headshell is also equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws.

Notes: AT-VM95C VM95 series Conical stereo cartridge - Aluminium cantilever, 4.0mV output voltage, Compatible body with all VM95 Series stylus assemblies and Replacement for AT91, AT91R and CN5625AL

VM95 series Conical stereo cartridge
The AT-VM95C, the new Audio-Technica entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL

Also the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT91, AT91R and CN5625AL
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VMN95C

AT-VMN95E

AT-VMN95EN

AT-VMN95ML

AT-VMN95SH

AT-VMN95SP

AT-VM9E Series compatibility with the AT-XP Series DJ Cartridges
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.
ATN-XP7

ATN-XP5

ATN-XP3

Conical Bonded Stylus
The benefit of conical styli, even if the cartridge is "lean

Cartridge & Stylus
Frequency Response 20 - 20,000 Hz
Channel Separation 18 dB (1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8 to 2.2g (2.0g standard)
Stylus Construction Bonded Round Shank

Notes: AT-VM95E VM95 series Elliptical stereo cartridge - Aluminium cantilever, 4.0mV output voltage, Compatible body with all VM95 Series stylus assemblies and Replacement for AT95E and AT95EX

VM95 series Elliptical stereo cartridge
The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT95E and AT95EX
20 to 22,000Hz frequency response
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VMN95C

AT-VMN95E

AT-VMN95EN

AT-VMN95ML

AT-VMN95SH

AT-VMN95SP

AT-VM9E Series compatibility with the AT-XP Series DJ Cartridges
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.
ATN-XP7

ATN-XP5

ATN-XP3

Elliptical Bonded Stylus
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

No use of nuts
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Cartridge & Stylus
Frequency Response 20 - 22,000 Hz
Channel Separation 20 dB (1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8 to 2.2g (2.0g standard)
Stylus Construction Bonded Round Shank

Notes: The custom designed AT8175 microphone pop filter clips onto the front of the mic to provide added protection against plosives. Designed to fit 20 Series vocal microphones.
The AT8175 is compatible with the following microphone models: AT2020, AT2020USB-X, AT2035, AT2050, AT2020USB+

Features

Microphone pop filter clips onto the front of the mic.
Perforated steel mesh design allows for passage of clear speech and adds protection against plosives.
Compatible with the following 20 Series vocal microphones: AT2020, AT2020USB-X, AT2035, AT2050, AT2020USB+.

Specifications

Dimensions 74 mm (2.9") × 63 mm (2.5") × 88 mm (3.5") (W × D × H)
Weight 31.1 g (1.1 oz)

Notes: P-mount Dual Moving Magnet cartridge with conical bonded stylus

AT81CP P-mount Dual Moving Magnet cartridge with conical bonded stylus. 0.6 mil conical stylus, Bonded round shank diamond and Carbon Fibre Reinforced ABS cantilever

The AT81CP allows owners of Technics, Hitachi, Pioneer and similar linear tracking turntables with T4P plug-in connectors to enjoy the high-fidelity sound that only Audio-Technica can offer.

Designed specifically for the linear format, the AT81CP features Audio-Technica's unique dual moving magnet construction. The dual magnet system is combined with the para-toroidal coil construction to assure an excellent sonic clarity and wide channel separation.

Specifications

Cartridge & Stylus

Frequency Response: 20 - 20,000 Hz
Channel Separation: 18 dB at 1kHz
Vertical Tracking Angle: 20 degrees
Stylus Construction: Bonded Round Shank
Recommended Load Impedance: 47,000 ohms
Coil Inductance: 400mH (1 kHz)
Output Voltage: 3.5 mV (mV at 1 kHz, 5 cm/sec)
Output Channel Balance: 2.5 dB
Stylus Shape: Conical
Cantilever : Carbon Fibre Reinforced ABS
Mounting: P-mount
Dimensions: H10.0×W15.3×D35.1 mm
Recommended Load Capacitance: 100-200 pF
Replacement Stylus: ATN81CP
Stylus Size: 0.6 mil
Type: Dual Magnet
Weight: 6.0g

Notes: P-mount Dual Moving Magnet cartridge with elliptical bonded stylus

AT85EP P-mount Dual Moving Magnet cartridge with elliptical bonded stylus. 0.3 x 0.7 mil elliptical stylus, Aluminium Pipe Cantilever and Elliptical bonded diamond stylus.

The AT85EP allows owners of Technics, Hitachi, Pioneer and similar linear tracking turntables with T4P plug-in connectors to enjoy the high-fidelity sound that only Audio-Technica can offer.

Designed specifically for the linear format, the AT85EP features Audio-Technica's unique dual moving magnet construction. The dual magnet system is combined with the para-toroidal coil construction to assure an excellent sonic clarity and wide channel separation.

Cartridge & Stylus

Frequency Response: 20 - 20,000 Hz
Channel Separation: 20 dB at 1kHz
Vertical Tracking Angle: 20-
Stylus Construction: Bonded Round Shank
Recommended Load Impedance: 47,000 ohms
Coil Inductance: 400mH (1 kHz)
Output Voltage: 3.5 mV (mV at 1 kHz, 5 cm/sec)
Output Channel Balance: 2.0 dB
Stylus Shape: Elliptical
Cantilever: Aluminium Pipe
Mounting: P-mount
Dimensions: H10.0×W15.3×D35.1 mm
Recommended Load Capacitance: 100-200 pF
Replacement Stylus: ATN85EP
Stylus Size: 0.3 x 0.7 mil
Type: Dual Magnet
Weight: 6.0g

Notes: The half-inch standard mount and dual-magnet AT-95E cartridge sounds clear, dynamic and richly balanced. The AT-95E has been a multiple recipient of best buy ratings in the UK. It has been created from combinations of the classic and musically acclaimed Linn Basik, K5 and K9 phono cartridges. Unlike these cartridges however, the AT-95E is delightfully affordable and available. It allows music lovers to use limited means to upgrade their turntables and as a result get a higher level of discernment and listening pleasure without the usual expense of high end cartridges, and some users may no longer wish to upgrade further.

Manufactured to Audio-Technica's world class quality standards, the Audio-Technica AT95E cartridge is completely hand assembled and tolerances are held to just thousands of an inch.

Notes: An excellent quality magnetic cartridge and stylus to fit most turntable headshells.

- Replacement elliptical stylus
- Fits many modern and vintage turntables
- Audiophile performance, handmade in Japan

Notes: The ATH-SPORT50BT wireless in-ear headphones pair great sound with great fit and freedom of movement to fuel your workout wherever it takes you. The comfortable ear-hook design keeps the headphones securely in place so the powerful 9 mm drivers can deliver all the crystal-clear audio received through the Bluetooth wireless signal. And with a mic and controls conveniently built into the left housing, it's easy to handle calls and control your music on the run.

The fit and sound characteristics can be adjusted further through the interchange of two types of included eartips: standard silicone eartips (XS/S/M/L) that provide outstanding sound isolation and ridged eartips (S/M/L) that allow some ambient noise to seep in for safer use outdoors. The internal lithium polymer rechargeable battery delivers six hours of continuous use and recharges easily with the included 30 cm (1') USB charging cable. The headphones are also IPX5 Waterproof Certified, so you can wash them off when your workout is through.

Notes: The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line.

Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.

Notes: Replacement Stylus for AT-XP3.

- Conical Bonded Stylus
- Carbon fibre-reinforced ABS cantilever
- Durable design for DJ application

Notes: ATN85EP Replacement stylus for AT85EP cartridge. Replacement stylus for AT85EP, Elliptical bonded stylus and Tracking force: 1.0 to 1.5 g (1.25 g standard)

0.3 x 0.7 mil elliptical replacement stylus for these cartridges: AT85EP, AT301EP, AT311EP, AT316EP, AT92ECD

Specifications

Tracking force: 1.0 to 1.5 g (1.25 g standard)
Stylus: Elliptical bonded
Cartridge (sold separately): AT85EP

Notes: Replacement stylus for Audio-Technica’s AT91R cartridge. Incorporates a bonded conical stylus tip and an aluminium alloy tube cantilever for the pick-up of subtle details.

0.6 mil conical replacement stylus for these cartridges: AT91R and CN5625AL

Notes: ATN95E Replacement stylus for AT95E cartridge - Compatible with AT93 cartridge and Compatible with AT95 cartridge

Replacement stylus for AT95E cartridgeThe ATN95E is also compatible with discontinued models AT93 and AT95.

Notes: ***B-STOCK: Box opened, product in perfect working order***


ATN95E Replacement stylus for AT95E cartridge - Compatible with AT93 cartridge and Compatible with AT95 cartridge

Replacement stylus for AT95E cartridgeThe ATN95E is also compatible with discontinued models AT93 and AT95.

Notes: ***B-STOCK: Box damaged, product in perfect working order***


Replacement stylus for the Audio-Technica AT95E cartridge. High quality elliptical stylus, giving better bass response and greater realism.

Notes: ATN95EX Replacement stylus for AT95EX. Elliptical diamond stylus with Bonded Round Shank, Replacement stylus for AT95EX in red.

0.3 x 0.7 Diamond Elliptical Replacement Stylus with Bonded Round Shank Replacement stylus for these cartridges: AT95EX

Notes: Replacement stylus for VM510CB & VM610MONO

VMN10CB Replacement stylus for VM510CB & VM610MONO. Conical Bonded stylus, Bonded Round Shank construction in blue

Features

Even the finest diamond stylus becomes worn after an extended period of play.The styli in our VM cartridges are no different. But it is easy to replace the stylus and continue to use your cartridge. Our renewed VM cartridges have 7 styli and 3 types of bodies to choose from. Not only is it not necessary to buy an entirely new cartridge, but you can also enjoy the experience of upgrading your stylus or trying a new cartridge/stylus combination.

Notes: AT-VMN95E VM95 series Elliptical replacement stylus - Aluminium Cantilever, Elliptical stylus and Bonded Round Shank

AT-VMN95E
VM95 series Elliptical replacement stylus
Aluminium cantilever
Elliptical stylus
Bonded Round Shank
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

This VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VMN95C
AT-VMN95E
AT-VMN95EN
AT-VMN95ML
AT-VMN95SH
AT-VMN95SP

Elliptical Bonded Stylus

Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Notes: Display and protect your cartridges within the distinctive design of this cartridge case, which allows for the secure storage of up to three cartrdiges together with their respective headshells.

3 sets of cartridges with headshells can be stored
Compatible with double pin lock headshells
Rubber feet for enhanced stability

Notes: Audio-Technica's AT6012 record cleaning kit removes micro-dust and other contaminants, dissolves fingerprints, and eliminates static electricity form your vinyl records.

Features

Scientific formula gently removes micro-dust and other contaminants, dissolves fingerprints, and eliminates static electricity from your vinyl records.
Velvet brush pad reaches into grooves.
Inner reservoir directs AT634 Record Care Solution into brush pad's leading edge.
Records and styli last longer.

Notes: Audio-Technica's AT6013a dual-action anti-static record cleaner utilises two carbon fibre brushes and velvet pad to remove harmful dust and contaminants from your vinyl records.

Features

Two carbon fibre brushes and central velvet pad work together to collect dust and other contaminants in one pass, ensuring your record collection is maintained for the highest audio performance.
Anti-static brush fibres remain straight for deep vinyl groove cleaning.
Increase the lifetime of your cartridge and improve your listening experience by reducing surface loss.

Notes: AT6108 Cartridge To Headshell Leadwires - 6N-OFC 99.99997% high-purity oxygen-free copper, 0.12mm x 29 core strand construction, Damping material used in wire sheath (titanium compounded sheath) and Gold plated terminals.

Features

6N-OFC Cartridge to headshell leadwires with gold plated terminals and 0.12 mm x 29 core strand construction

Notes: Machined aluminium housing turntable leveler that provides a precise level for horizontal adjustment of the turntable.

Notes: AT617a Cartridge Stylus Cleaner - Specially formulated polyurethane gel removes dirt particles from stylus, Gel remains tacky for years and Surface is washable for repeated use.

The AT617a cartridge stylus cleaner is a specially formulated polyurethane gel that gently removes dirt particles from the stylus tip when the stylus is lowered onto it. The gel's surface is washable and will remain tacky for years.

Specifications

Material: Polyurethane gel

Dimensions: 37.5 mm (1.48") diameter × 17 mm (0.67")

Notes: A universal stroboscopic disc used to show the running speed of the turntable at 33 and 45 RPM with a spindle radius guide.

Notes: This rubber construction disk stabalizer holds vinyl records firmly in place with its 600g weight, stabalizing the record.