100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Befaco

Inicio  Labels  

Befaco

Options
Artículos del 1 al 36 de 36 en la página 1 de 1
Befaco 100cm Patch Cables (white, pack of 4)
Cat: 668660 Rel: 09 Nov 17
 
4 x high quality white patch cables
Notes: Pack of high Quality patch cables. Not too stiff, not too loose!

One colour for each size make Befaco patch cables just perfect to keep them organized!

This pack contains 4 high quality white patch cables.
Read more
 5 in stock $10.86
Befaco 15cm Patch Cables (yellow, pack of 6)
Cat: 668651 Rel: 09 Nov 17
 
6 x high quality yellow patch cables
Notes: Pack of high Quality patch cables. Not too stiff, not too loose!

One colour for each size make Befaco patch cables just perfect to keep them organized!

This pack contains 6 high quality yellow patch cables.
Read more
 More than 10 in stock $13.99
Befaco 200cm Patch Cables (green, pack of 3)
Cat: 668665 Rel: 09 Nov 17
 
3 x high quality green patch cables
Notes: Pack of high Quality patch cables. Not too stiff, not too loose!

One colour for each size make Befaco patch cables just perfect to keep them organized!

This pack contains 3 high quality green patch cables.
Read more
 2 in stock $10.86
Befaco 3.5mm Minijack To 6.3mm Jack Patch Cables (150cm length, pack of 3)
Cat: 668666 Rel: 09 Nov 17
 
Pack of three 1.5m jack-to-minijack cables
Notes: Each male jack (6.35mm) to male mini-jack (3.5mm) cable is 1.5m long.
Read more
 More than 10 in stock $10.86
Befaco 50cm Patch Cables (orange, pack of 5)
Cat: 668657 Rel: 09 Nov 17
 
5 x high quality orange patch cables
Notes: Pack of high Quality patch cables. Not too stiff, not too loose!

One colour for each size make Befaco patch cables just perfect to keep them organized!

This pack contains 5 high quality orange patch cables.
Read more
 More than 10 in stock $15.34
Befaco 7cm Patch Cables (purple, pack of 6)
Cat: 668645 Rel: 09 Nov 17
 
6 x high quality purple patch cables
Notes: Pack of high Quality patch cables. Not too stiff, not too loose!

One colour for each size make Befaco patch cables just perfect to keep them organized!

This pack contains 6 high quality purple patch cables.
Read more
 6 in stock $12.91
Befaco 80cm Patch Cables (red, pack of 4)
Cat: 668658 Rel: 09 Nov 17
 
4 x high quality red patch cables
Notes: Pack of high Quality patch cables. Not too stiff, not too loose!

One colour for each size make Befaco patch cables just perfect to keep them organized!

This pack contains 4 high quality red patch cables.
Read more
 4 in stock $15.34
Befaco Bananuts Anodised Aluminium Custom Minijack Nuts (black, pack of 25)
Cat: 739913 Rel: 20 Sep 19
 
Pack of 25 Bananuts in black colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
 2 in stock $8.64
Befaco Bananuts Anodised Aluminium Custom Minijack Nuts (blue, pack of 25)
Cat: 739906 Rel: 20 Sep 19
 
Pack of 25 Bananuts in blue colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
 3 in stock $8.64
Befaco Bananuts Anodised Aluminium Custom Minijack Nuts (green, pack of 25)
Cat: 739912 Rel: 20 Sep 19
 
Pack of 25 Bananuts in green colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
 5 in stock $8.64
Befaco Bananuts Anodised Aluminium Custom Minijack Nuts (orange, pack of 25)
Cat: 739909 Rel: 20 Sep 19
 
Pack of 25 Bananuts in orange colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
 1 in stock $8.64
Befaco Bananuts Anodised Aluminium Custom Minijack Nuts (purple, pack of 25)
Cat: 739907 Rel: 20 Sep 19
 
Pack of 25 Bananuts in purple colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
 3 in stock $8.64
Befaco Bananuts Anodised Aluminium Custom Minijack Nuts (red, pack of 25)
Cat: 739908 Rel: 20 Sep 19
 
Pack of 25 Bananuts in red colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
 2 in stock $8.64
Befaco Bananuts Anodised Aluminium Custom Minijack Nuts (yellow, pack of 25)
Cat: 739910 Rel: 20 Sep 19
 
Pack of 25 Bananuts in yellow colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
 3 in stock $8.64
Befaco Burst Pingable Trigger Burst Generator Module (assembled)
Cat: 689667 Rel: 14 Jun 18
 
Probabilistic & pingable burst generator - 8HP
Notes: Burst is a Pingable Trigger Burst generator with distribution, probability and time division control. It will create multiplications of your triggers, leading to doubles, triplets, quintuplets and true polyrhythms for your modular system.

The module allows you to add voltage controlled redrums and dynamic ratcheting effects for your patches. In addition, Burst works like a regular clock source and trigger for other modules via its Tempo and End of Cycle outputs.
Read more
MRP:$220.31 SAVE 22%
 3 in stock $172.73
Click for better price!
or call +44 20 7424 1960
quote 689667
Befaco Crush Delay V3 Echo Module (assembled)
Cat: 668620 Rel: 09 Nov 17
 
Echo-delay unit based on the PT2399 IC
Notes: Crush Delay v3 is a special Echo-Delay unit based on the PT2399 IC, which is able to offer 400ms of clean delay and up to 2 seconds of dirty repetitions, having a special talent to generate noisy-glitch textures. The module bases its operation on controlling the PT2399 chip with circuit bending techniques, converting the unit in an advanced VC digital trash generator. This third version comes with some interesting new features like redesigned VCAs circuits, wider range for clean delay and reduced depth to make it skiff friendly.

The module features a few VCAs to provide a flexible signal route to maximize module's possibilities. First two VCAs at the inputs to control the amount of signal sent to the delay. The first is routed to both the dry/wet mix and the delay, and the second directly to the delay. Combining the second VCA and the FX Send output allows external feedback routings.

Compared with v2, this third version offers a bigger range of clean delay time as well as a revision of some of the Crush modifiers. Combining those modifiers you will have a access to a vast palette of noises and textures that can be used in many different ways. From ambient/drone patches to even percussion sounds.

The VC Feedback features an automatic gain control to keep levels stable at any feedback level.

- Current needs: +12V: 135mA, -12V: 35mA
- Width: 11 HP
- Depth: 30 mm (inc power connector)
- Aluminium, heat-treated front panel
- Designed, kits prepared and modules assembled in Barcelona
Read more
MRP:$306.35 SAVE 26%
 3 in stock $228.12
Befaco CV Thing Voltage Controlled MIDI Controller Module
Cat: 775217 Rel: 08 Jul 20
 
MIDI controller module
Notes: A 6 HP version of the VCMC module. Simpler, less connectivity but all the flexibility and power from VCMC.

It's the exact same concept as the VCMC in that you pump in CV and control MIDI gear or your DAW and software instruments but in a much smaller package. The faders and buttons have been droppws and just give you 8 CV inputs, a big white knob and that rather nice little screen. The MIDI connections are taken care of by a TRS socket and USB for direct connection to a computer.

Essentially, you've lost the manual controls over MIDI gear that the faders and buttons provided and are just going straight with triggers, notes or modulation.

Each of the 8 CV inputs can be mapped to any MIDI message or controller number, note or event. You can send clock, program changes, note on/off and everything you'd expect in MIDI. It's a pretty great way of connecting your modular to your external instruments or software while keeping the control in the Eurorack rather than ceding control to the DAW. And if you prefer things the other way around then Befaco also makes a MIDI Thing MIDI-to-CV interface.
Read more
MRP:$335.03 SAVE 28%
 5 in stock $240.07
Befaco Hex Mix VCA Module (assembled)
Cat: 668637 Rel: 09 Nov 17
 
6-channel performance mixer with EQ's & mutes
Notes: Hex mix VCA is a compact six channel VCA with an unique response curve range from logarythmic to linear and to exponential using a pot.

All outputs are routed to output six to act as a mixer, with a normalization of each one to remove each VCA from the Mix.

Hexmix VCA can act as six independent VCAs as well as a Mixer for all the inputs (Selectable via a switch). Featuring an internal connection to interface with our Hexmix system.

Every VCA has a response pot for the incoming CV, being full logarythmic at maximum setup and full exponentiall at minimum setup, having the linear response in the centre position.

The pot provides the full range of responses to adecuante to our prefered application, such as percusive sounds or panning effects.

Level pot of each channel is an attenuator of the signal coming out of each VCA.

Jacks are normalled to 10 volts, so when we have no CV present VCA would be fully open and our Level pot will act as a volume.
Read more
MRP:$371.53 SAVE 19%
 3 in stock $302.01
Click for better price!
or call +44 20 7424 1960
quote 668637
Befaco Hexmix Mixer Module (assembled)
Cat: 670606 Rel: 11 Jan 18
 
6-channel performance mixer with three band EQ, mute & pan - 28HP
Notes: Hexmix System is a six channel performance mixer specially designed for Eurorack.

The system has two separate modules, the core of the mixer: Hexmix that has six channels with three band EQ, mute, pan and EQ section on the master, and Hexpander that add three auxiliar sends per channel, PFL, individual outs and balanced output.

The mixer has a strong inspiration in classical DJ mixers, providing sharp EQ's for enhanced performance, auxilliar send for effects and individual outputs to record your performance per channel.

The unique Mute Section is a powerful tool for performances, providing a momentary mute function controlled by vactrols and adding a smooth release to the signal decay.

The system is designed to be placed in 6U, instead of the traditional 3U paradigm in Eurorack. So we will have every feature for each channel vertically as a conventional tabletop mixing deck.

This is a six channels mixer with three band EQ, vactrol mutes, pan and volume control per channel.

Inputs for every channel are located at left side of Hexmix. Each jack is normalized to a VCA Expander connection in the back, so if you have a Hexmix VCA, you will have the output of each VCA to every input. connecting a jack in any input will disconnect whatever is coming from VCA.

Each Channel Strip is divided in four basic sections, that will go in the following order: Gain, Mute, EQ and Pan.

Gain is set to unity, so it will act as an attenuator of the input signal. Mutes are clickless, as they are vactrol based. This circuit provide some decay on the mutes, rather than a sharp cut.

Switches have latch position and momentary ones to unmute the channel, providing some really nice performative capabilities.

EQs are quite sharp (12dB) inspired in classic DJ mixers to aggressively cut selected frequencies.

Master section has its own EQ and volume control for the mix of all channels. Master EQ is software than individual channel's (6dB) and it's meant to provide control over the final mix.

It's possible to change output level from line to synth with a switch located in the back.

This will be pretty useful when used in combination with Hexpander, that provides a balanced out at line level. Like this it's possible to have a mix at synth level to re-route the master signal while having an output to PA.
Read more
MRP:$559.24 SAVE 20%
 4 in stock $449.74
Click for better price!
or call +44 20 7424 1960
quote 670606
Befaco Hexpander Module (assembled)
Cat: 670607 Rel: 10 Jan 18
 
Expander module for the Befaco Hex Mix
Notes: Hexpander adds great functionality to Hexmix module. Featuring Three aux send with stereo returns, individual outputs for each channel, complete PFL system and balanced output.

Hexpander is designed to be placed on top of Hexmix. Expanding Eurorack concept to 6u, allows every channel to be aligned as in traditional tabletop mixers.

Auxiliar sends:
For every channel you have three auxiliar sends. One pot will measure the amount of signal sent to each of them.

Every auxiliar send has a volume pot, that will measure the level of the signal sent. There are two jacks available so it is possible to send the signal both pre or post fader/EQ at the same time, allowing to patch externally depending if its desired to have the original signal, or the signal after being EQ'ed on the effect.

Returns are stereo, having a switch to select if the signal is coming from synth or line level. Like this, levels can be set, for example, either for a guitar pedal or a FX module at synth level.

Monitor section:
Hexpander features a complete PFL system, to send channels to the headphones before you add them to main mix.

Flip PFL switch to send that channel to the headphones out.

With PFL/Master Pot you can do a crossfade between the master signal and every channel sent to PFL. Headphones out will control headphones volume.

Level meter will show the level of the sum of all active PFLs. When there is no PFL active, it will show master level.

Output section:
Every channel has individual 6,5? jacks out at line level. Here you have the signal of every channel post EQ.

As an addition, you have master balanced output.
Read more
MRP:$415.85 SAVE 19%
 5 in stock $336.76
Click for better price!
or call +44 20 7424 1960
quote 670607
Befaco i4 Instrument Interface Preamp Module (assembled)
Cat: 749081 Rel: 25 Oct 19
 
Eurorack instrument interface with Neutrik combo connector - 8HP
Notes: Instrument Interface is a Eurorack pre-amp capable of bringing any type of audio signal to modular levels, thanks to its amplification circuit.

The module can drive regular and condenser microphones (+48V Phantom Powered), as well as Instrument and Line signals with a very low distortion ratio.

Going further from the regular re-amp operation, Instrument Interface offers some additional extra functions like a Trig/Gate extractor and Envelope Follower circuits, allowing you to use the character of your audio signal in more creative ways.
Read more
MRP:$285.49 SAVE 21%
 2 in stock $224.86
Click for better price!
or call +44 20 7424 1960
quote 749081
Befaco Inamp Module (assembled)
Cat: 749089 Rel: 24 Oct 19
 
Dual pre-amplifier module - 4HP
Notes: Inamp is a dual pre-amp in just 4 HPs. Featuring 6,3 Jacks inputs as well as Minijacks.

Both inputs are summed so you can use them at the same time as an input mixer.

The unit is designed to amplify up to x20 the input signal, allowing to amplify most of the music machines out there (Domestic line levels) as well as some guitars (Humbucker-like pickups and so).

The first channel is normalled to second one in series, so it's possible to have two stages of amplification or two separate ones.
Read more
MRP:$175.99 SAVE 42%
 1 in stock $102.11
Befaco Joystick Controller Module (assembled)
Cat: 668629 Rel: 09 Nov 17
 
2 axis CV generator/attenuverting joystick
Notes: The Joystick is a compact two axis attenuverting (attenuator-inverter) joystick controller.

The Joystick features a robust arcade style joystick for manually generating either CV with Range and Offset control or attenuating two input signals. It also includes two push buttons to manually generate gates.

- Current needs: +12V: 25mA, -12V: 10mA
- Width: 12 HP
- Depth: 35 mm (inc. power connector)
Read more
MRP:$207.27 SAVE 21%
 1 in stock $164.03
Click for better price!
or call +44 20 7424 1960
quote 668629
Befaco Kickall Percussion Voice Module (assembled)
Cat: 689669 Rel: 14 Feb 19
 
Punchy kick drum module - 6HP
Notes: Kickall is a 6HP compact synth voice that features everything needed to make a big fat Kick sound: A stable VCO that tracks V/oct, a couple of VCAs, envelopes for volume and pitch and an aggressive wave shaper.

The module has been designed with a kick synthesis patch in mind: VCO to VCA with an envelope to open the VCA and another one to change VCO pitch. As addition a CV controlled waveshapper has been added to the VCO and an extra VCA at the end of the signal path to control the volume of the sound to act as kind of an accent.
Read more
MRP:$280.27 SAVE 21%
 5 in stock $221.61
Click for better price!
or call +44 20 7424 1960
quote 689669
Befaco M2.5 Knurlies Eurorack Synth Module Screws (pack of 100)
Cat: 699920 Rel: 06 Nov 18
 
Pack of 100 Knurlies Eurorack M2.5 rack screws
Notes: 100 of Befaco's unique screws designed specifically for Eurorack. These M2.5 screws can be secured by hand, all common screwdrivers and Allen Key. These are great for saving time when rearranging your synth.

Each Knurlie comes with a fitted plastic washer to prevent rack rash.
Read more
 7 in stock $32.00
Befaco M2.5 Knurlies Eurorack Synth Module Screws (pack of 100) (B-STOCK)
Cat: 787079 Rel: 06 Nov 18
 
B-STOCK: Box damaged, product in perfect working order
Notes: ***B-STOCK: Box damaged, product in perfect working order***


100 of Befaco's unique screws designed specifically for Eurorack. These M2.5 screws can be secured by hand, all common screwdrivers and Allen Key. These are great for saving time when rearranging your synth.

Each Knurlie comes with a fitted plastic washer to prevent rack rash.
Read more
 1 in stock $28.78
Befaco M2.5 Knurlies Eurorack Synth Module Screws With Washers (pack of 50)
Cat: 699919 Rel: 06 Nov 18
 
Pack of 50 Knurlies Eurorack M2.5 rack screws
Notes: 50 of Befaco's unique screws designed specifically for Eurorack. These M2.5 screws can be secured by hand, all common screwdrivers and Allen Key. These are great for saving time when rearranging your synth.

Each Knurlie comes with a fitted plastic washer to prevent rack rash.
Read more
 More than 10 in stock $25.80
FORTHCOMING
Befaco Male DIN5 To TRS Minijack Cable (1.5m, pack of 3)
Cat: 784170 Rel: 08 Oct 20
 
DIN5 to TRS cable
MRP:$14.34 SAVE 24%
coming soon $10.86
FORTHCOMING
Befaco Minijack To Jack Cable (1m, pack of 3)
Cat: 784176 Rel: 08 Oct 20
 
Minijack to jack cable
Notes: The Minijack - Jack Cable is a high quality 1 metre audio cable that features both 1/4 Inch Jack and 1/8 Inch minijack connections.

High Quality Shielded Cable

Mono 1/4 inch jack connector

Mono 3.5mm minijack connector

Length: 1 Metre
Read more
MRP:$14.34 SAVE 24%
coming soon $10.86
Befaco Muxlicer Sequential Signal Processor Module (assembled)
Cat: 689665 Rel: 14 Jun 18
 
VC addressable sequential switch & sequencer - 16HP
Notes: Muxlicer is a sequential signal processor designed for add a huge range of special functions to your modular setup in the minimum space.

Muxlicer is divided in three main blocks: Digital Step Controller, Gate Generator and Analog Switch (a.k.a. Mux/DeMux).

The module is designed with high "function to HP ratio" philosophy, to have maximum flexibility in minimum space.
Read more
MRP:$280.27 SAVE 23%
 4 in stock $215.09
Click for better price!
or call +44 20 7424 1960
quote 689665
Befaco Output V3 Module (assembled)
Cat: 689670 Rel: 14 Jun 18
 
Output interface & headphone amp - 4HP
Notes: Befaco's new Output Module is designed to be the master output for your modular system, providing an extra Cue Input to monitor any signal.

Left IN is routed to both channels when no Right signal is present. Both Outputs are TRS balanced.

A Headphones out is available. You can route Headphone OUT to the main out or an independent signal with CUE switch. Like this you can either pre-listen your sounds with the CUE Input or listen to your main out without disturbing your neighbours!

Level LEDs are available to monitor levels of each signal on the module.
Read more
MRP:$175.99 SAVE 21%
 3 in stock $139.06
Click for better price!
or call +44 20 7424 1960
quote 689670
Befaco Percall Quad VCA With Decay Envelope Module
Cat: 739916 Rel: 02 Jun 20
 
VC quad decay & four channel mixer - 12HP
Notes: From trickling hi-hats to thunderous kicks. The Befaco Percall 4-Channel VCA/Delay Envelope Module is designed to take care of all percussive aspects of your Eurorack rig. You'll be able to create a whole host of percussion thanks to the 4 VCAs, volume control and decay options. By using the trigger you'll be free to open the VCA whilst the volume knob helps determine the level of the percussive sound you've sculpted. Take your tones to the next level thanks to the inclusion of an output on the envelope. You can apply this to the pitch of the oscillator to achieve a fat kick drum which offers excellent low frequency energy. The Percall 4-channel module is the ultimate addition to your Eurorack.
Read more
MRP:$311.56 SAVE 24%
 4 in stock $236.81
Befaco Spring Reverb Module (assembled)
Cat: 668584 Rel: 09 Nov 17
 
CV controlled spring reverb - 8HP
Notes: Electronically generated audio will usually sound starkly different to acoustically generated sound. This is more-often-than-not a desirable thing, but there are times when you might want to bring the "depth" of an acoustic environment back into your mix. The obvious difference between acoustic and synthesised sounds is that acoustic instruments have resonators, and exist in reverberant spaces. One way to add depth to an electronic sound is to somehow simulate the characteristics of a space, and mix this with the original signal.

Reverberation can be defined as the sum of all the reflections created from an initial sound source within a space, at a point within that space, over time.

To simulate this effect we can pass a sound through a spring with two transducers at either end. As the sound propagates it will cause the spring to expand and contract, creating a series of reflections that are picked up by the transducers (along with the original sound). This creates a simulation of reverberation with (in the case of spring of the reverb) a characteristic and classic colour.

FEATURES
The module has two audio inputs both of which can be CV or slider controlled:
- "IN1" is routed both to "DRY" mix and reverb tank input
- "IN2" Goes only to the reverb tank

The module also has 2 outputs:
- "WET" comes straight from reverb tank
- "MIX" is the mix of DRY signal and the output of reverb tank. It has CV control

It is possible to feedback the "WET" signal back into the module via "IN2" in either a straight feedback path or after passing through other modules before returning to "IN2".

With the "MIX" control we can control the amount of reverb and feedback in the mix while maintaining the presence of the original signal.

The module also features a high-pass filter at the input of the tank to control the colour of the reverberation and to tame saturation that may be created in the spring during feedback.

Finally there is a built-in VU meter connected to the "WET" output to visualise the level and saturation of the signal.
Read more
MRP:$332.42 SAVE 29%
 1 in stock $234.65
Befaco Stmix 4 Channel Stereo Mixer Module
Cat: 716763 Rel: 14 Feb 19
 
Stereo mixer - 6HP
Notes: Stmix is a compact 4 channel stereo mixer with an Auxilliar input. This input will allow us to chain a few of them or to insert an extra fifth input.

This module is compatible with our Hexmix system, and can be internally connected to hexmix module to add the output of STMIX to your main mix.
Read more
MRP:$175.99 SAVE 21%
 More than 10 in stock $139.06
Click for better price!
or call +44 20 7424 1960
quote 716763
Befaco VC ADSR Module (assembled)
Cat: 668622 Rel: 09 Nov 17
 
Compact, well-equipped envelope module - 8HP
Notes: The VC ADSR is our take on the classic ADSR: now smaller, more powerful and user friendly.

The circuit is based in a dual transistor "Current Mirror" (a voltage controlled integrator) and switching logic

This compact unit features voltage control for each stage with manual faders to improve usability, feel and aesthetics.

A unique feature of the VC ADSR is the gate outputs for each stage of the envelope offering an extra level of control over your patch!

Envelope generation can be triggered and controlled with the use of the panel mounted push button or with the trigger/gate input.

Control of the response curve between each stage of the envelope (from linear to logarithmic/exponential) is provided by a potentiometer.

Phase Time Limits:

- Attack: Min 3.0ms (down to 200uS with negative CV) // Max 10s
- Decay: Min 2.8ms (down to 400uS with negative CV) // Max 10s
- Release: Min 2.8ms (with Sustain at maximum) // Max 10s
Read more
MRP:$220.31 SAVE 19%
 1 in stock $178.15
Click for better price!
or call +44 20 7424 1960
quote 668622
Befaco VCMC Voltage Controlled MIDI Controller Module (assembled)
Cat: 739915 Rel: 24 Oct 19
 
Full voltage-controlled instrument interface
Notes: Interesting MIDI option for Eurorack. Eight faders and buttons, mappable to MIDI note, CC and lots more parameters, then controllable using CV and gate signals. Versatile.

Supplier's notes:
A fully editable MIDI controller with eight faders and push buttons. Each of them with a CV or Gate input associated to automate their functioning via external signals or to be configured independently for further control.

Each control on VCMC can be edited on its OLED screen and will be output either via DIN-5 or USB as a class compliant MIDI device.

- Current needs: +12V: 64mA, -12V: 12mA
- Width: 20 HP
- Depth: 30 mm
- Aluminium, heat-treated front panel
Read more
MRP:$415.85 SAVE 20%
 5 in stock $331.34
Click for better price!
or call +44 20 7424 1960
quote 739915
Artículos del 1 al 36 de 36 en la página 1 de 1

Filter

Befaco
Release Date
Featured
Close