100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Erogenous Tones

Inicio  Labels  

Erogenous Tones

Options
Artículos del 1 al 5 de 5 en la página 1 de 1
Erogenous Tones 6" Patch Cables (purple, pack of 8)
Cat: 644215 Rel: 06 Apr 17
 
3 inch patch cables - purple, 8-pack
Notes: Custom patch cables made to reduce cable clutter.
Read more
 2 in stock $15.59
Erogenous Tones LEVIT8 Attenuator Gain Inverter Mixer Utility Module
Cat: 644210 Rel: 06 Apr 17
 
High density 8 channel utility module - 10HP
Notes: Levit8 is a high density utility module designed to give you a large number of attenuator/gain functions along with optional mix, invert, DC offset and polarity indication for incoming signals.

Few modules can beat the LEVIT8's high density of functions, which has eight channels that can be used as individual attenuators, amplifiers, inverters of offset generators. Optionally it features three different mix configurations with four or eight inputs for control voltages or audio signals, fulfilling various tasks at the same time.
Read more
MRP:$214.64 SAVE 22%
 4 in stock $167.96
Click for better price!
or call +44 20 7424 1960
quote 644210
Erogenous Tones RADAR Octal AD/AR Envelope Module
Cat: 644212 Rel: 06 Apr 17
 
8 channel AD/AR LFO envelope generator - 28HP
Notes: RADAR is a high density envelope generator module designed to give you a large number of envelopes with a variety of different modes of operation. The name RADAR stands for (R)epeating, AD, AR.

Mode 1: 8 channels of AD/AR envelopes:
- Envelopes can be set to AD or AR by switch OR by the level of an applied gate voltage.
- Setting the envelope mode to R, for repeating, puts them in LFO mode.
- The input of each channel is normalized downward unless a channel is in LFO mode, then it breaks the normalization.
- Envelope trigger modelling is selected in sets of 2; Analog or Digital model mode: in analog mode, sending a reset trigger only changes discharging (release or decay) to charging mode (attack). Frequency is also not held constant when changing shape in this mode / in digital mode, sending a reset trigger resets the envelope to the very start of the attack phase. Frequency is held constant when changing shape in this mode.
- Envelope shape is selectable between logarithm, through linear to exponential. The waveform morphs between these states. And offset CV is included to modulate these settings.
- Fall shape mode is selected in sets of 2; the fall waveform either matches the rise, or is the opposite of rise.
- Output 4 can be changed to be the max level of Output 3 and Output 4. We call this OR mode and is designed to generate more complex shapes.
- Output 8 can be changed to be the max level of Output 6, Output 7 and Output 8. Again, called OR mode and is designed to generate more complex shapes.
- Each output goes to +10V and has a bi-colour LED indicated whether the signal is in rise or fall mode.

Mode 2: 4 AD/AR lanes + 1 Quadrature set OR 2 Quadrature sets:
- Lanes 1-4 use the output switch on lane 4 to select between either 4 independent AD/AR lanes or you can have them be a second Quadrature set.
- Quadrature sets generate 0, 90, 180 and 270 degree based on channel 1 or channel 5 depending on settings.
- Channel 1/5 set the parameters for all the waves being generated.
- Channel 2/6 can be used to apply a SPEED CV to the quadrature generated waves. Activated with the RADAR switch (so you can shut off when not using). The SHAPE knob and CV then speed up or slow down the repeating waveforms being generated.
- Channels 3/7 can be used to apply a GRAVITY CV to the quadrature generated waves. The SHAPE knob and CV then cause the 90/180/270 waveforms to be logarithmically attracted or repelled in time to the 0 degree waveform.
- Channel 4/8 can be used to apply a SHAPE DELTA CV to the quadrature generated waves. The SHAPE knob and CV then allow the shape to morph in either direction from the setting of Channel 1/5 through the steps.

Mode 3:1 Octature set:
- Works the same as Quadrature mode except all 8 channels are steps of 45 degrees off from one another.
- Channels 1-4 control all CV.
Read more
 2 in stock $436.26
Click for better price!
or call +44 20 7424 1960
quote 644212
Erogenous Tones Structure Visual Synthesis Module
Cat: 700730 Rel: 03 Jul 19
 
Eurorack visual generator module
Notes: STRUCTURE is a visual generator module that is based internally on an OpenGL GLSL node based platform. It uses the concept of node structures to push visuals through the system.

STRUCTURE contains a video input system that you can select between two formats, Composite video or LZX 1V RGB (with sync applied to rear of module). The Composite input does full colour decoding. Input video can be mixed through effects, with other generators, effected with audio, etc. Input video can be NTSC or PAL, 480i. STRUCTURE auto detects and converts video inputs.

STRUCTURE contains two mirrored video outputs, both composite, selectable to NTSC or PAL 480i.

Two audio rate CV inputs can be used with audio nodes to generate audio based visuals, effects moved by audio waveform, XY plotting of audio inputs, or just used at low frequency CV inputs when not using audio nodes.

Three CV rate inputs can be used to modulate a variety of controls on each node.

All CV can be set independently to 1V or 5V expected input. Each CV has a scale control and a positive offset control for fine tuning incoming CV voltages.

A joystick can be used to modulate controls in real time, or used to record motion information that is played back in a loop. In addition, the joystick has a metal hat for nice weighted movement.

STRUCTURE can also generate 3D graphics, animate properties of the 3D objects, and allow you to map and node type to the texture of the 3D objects (like video).

Three gate inputs, usable by local buttons as well.

Three macro knobs on the top right, allow for global changes to the output node which are user configurable.

STRUCTURE has a USB input, which you can attach MIDI interfaces, MIDI keyboards, controllers, etc, or even a standard PC keyboard or numeric keypad. You can assign actions or state changes to trigger from any of these input sources.

SDCARD on front and back. Backside SDCARD stores system, front side stores user presets, images, configurations, objects, custom shaders, etc.

STRUCTURE has a full colour 320×240 preview screen which also provides lots of feedback when using.
Read more
 3 in stock $827.82
Erogenous Tones VC8 Octal VCA Module
Cat: 644208 Rel: 06 Apr 17
 
High density octal linear VCA module - 18HP
Notes: VC8 is a high density VCA module designed to give you a large number of VCAs with CV level and OFFSET control, along with optional VCA controlled dual sub-mix capability.

The VC8 combines eight high-class VCAs with linear characteristics in one module. Each channel offers a modulation input plus attenuator, a bipolar offset potentiometer and a level LED. Routing options enable the user to create sub-mixes of four channels.
Read more
 6 in stock $296.67
Artículos del 1 al 5 de 5 en la página 1 de 1

Filter

Erogenous Tones
Release Date
Featured
Close