100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Happy Nerding

Inicio  Labels  

Happy Nerding

Options
Artículos del 1 al 6 de 6 en la página 1 de 1
Happy Nerding 3x VCA Module (silver faceplate)
Cat: 777885 Rel: 22 Jul 20
 
VCA module
Notes: 3xVCA ofers three high class amplifier circuits with linear characteristic. Thanks to AC / DC compatibility, a very low noise floor and basically no distortion, the module is not only a great partner for control voltages, but audio material as well. Besides a signal input and output, each VCA has its own CV input. The dual potentiometers regulate levels and bipolar CV attenuation values of all amplifiers. Using these rather unusual, yet very practical components, it was possible to equip the 3x VCA with a front panel that is only 6 HP wide. Switches allow the user to feed the results of one amplifier to the output of the next amplifier, so we can get 1+2, 2+3, and 1+2+3 outputs mix. Two-colored LEDs visualize CV and output signals.

60 mA +12V
60 mA -12V
35 mm Depth
Read more
MRP:$190.69 SAVE 19%
 2 in stock $154.42
Click for better price!
or call +44 20 7424 1960
quote 777885
Happy Nerding FM AID Through-Zero Linear Frequency Modulator Module (silver)
Cat: 795454 Rel: 11 Nov 20
 
Frequency modulator module
Notes: Clever FM module that does digital-style through-zero FM using analogue circuits. Use any signals from other modules as your carrier and modulator, then phase modulate or wavefold in the FM Aid.

Supplier's Notes:
FM AID is a module designed to perform through-zero linear Frequency Modulation (FM) in the analog modular world. Any arbitrary signals can be used as a Carrier and Modulator. The module copies FM in how it is done in digital implementation, but in a completely analog circuit free of digital aliasing artifacts. Digital or software FM oscillators are mainly based on a ramp waveform which is then shaped to other waveforms. This is also represented in the FM AID module: sawtooth signal is expected on the Carrier input to give the indicated sine, triangle, sawtooth and square waveforms on the respective outputs. However the user is not limited to only use sawtooth for the Carrier and any other signal can be plugged giving many complex waveforms at the outputs.

All known FM tricks from digital implementation are also applied - you can endlessly experiment with the Carrier/Modulator frequency ratios, Modulation index (FM knob), Modulator's amplitude shaping (CV knob), feedback FM (output is fed back to the Modulator's input) and many other.
Carrier input has normalled connection to the Modulator's input. This internal routing is disconnected each time a plug is inserted in the Modulator's input. That is a handy option which allows the module to be used with only one signal source - this single signal will act as Carrier and Modulator at the same time. There won't be any frequency differences between Carrier and Modulator in this case, but many interesting wave folding sounds will be available anyway.

Technically speaking FM AID uses Phase Modulation, not Frequency Modulation. The sonic difference is that the produces sound is brighter.

SPECIFICATIONS

Carrier input level: -5V ... + 5V (can also accept inputs ranging from -1V ... +1V] to [-12V ...+12V] / [-15V ...+15V] using onboard trimmer)

Modulator input level: preferably -5V ... + 5V

CV input level: preferably -5V ... + 5V

outputs level: -5V ... + 5V

outputs impedance: 1 kOhm

module depth: 3 cm or 1,5 inches

power consumption: +45 /-45 mA at +/-12 Vdc, +50 /-50 mA at +/-15 Vdc
Read more
MRP:$194.72 SAVE 28%
 9 in stock $139.89
Click for better price!
or call +44 20 7424 1960
quote 795454
Happy Nerding FX AID Multiple Audio Effects Module (black faceplate)
Cat: 792159 Rel: 05 Oct 20
 
Multiple audio effects module
Notes: 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analog Dry/Wet control with dedicated CV input. High quality stereo signal pass. Assignable CV input to effect controls or to Sample Rate reducer (changes internal clock). Four user storable presets - stores selected program and all three controls. Spin FV-1 based.

The last used effect, assigns and presets are always remembered.

32 effects are simultaneously available, but FX AID can be reflashed with other user selected Happy Nerding effects in any order. Also the possibility to run freely available third party effects will be added too.

Reflashing procedure is quite easy: playing 40 sec long "wav" file of line level amplitude to CV input.

Reflashing mode: hold both buttons for 10 sec.

Please note the reverse CV operation of the Dry/Wet control: positive CV crossfades from Wet to Dry, and negative CV crossfades from Dry to Wet.

By default it runs on 32.77 kHz and, if sample rate reduction assign is used, this sample rate can be decreased down to 150 Hz or brought up to 48 kHz.

80 mA +12V
30 mA -12V
45 mm deep
Read more
MRP:$247.09 SAVE 21%
! low stock $195.84
Click for better price!
or call +44 20 7424 1960
quote 792159
Happy Nerding FX AID Multiple Audio Effects Module (silver faceplate)
Cat: 792156 Rel: 05 Oct 20
 
Multiple audio effects module
Notes: 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analog Dry/Wet control with dedicated CV input. High quality stereo signal pass. Assignable CV input to effect controls or to Sample Rate reducer (changes internal clock). Four user storable presets - stores selected program and all three controls. Spin FV-1 based.

The last used effect, assigns and presets are always remembered.

32 effects are simultaneously available, but FX AID can be reflashed with other effects in any order.

Reflashing procedure is quite easy: playing 40 sec long "wav" file of line level amplitude to CV input.

Reflashing mode: hold both buttons for 10 sec.

Please note the reverse CV operation of the Dry/Wet control: positive CV crossfades from Wet to Dry, and negative CV crossfades from Dry to Wet.

By default it runs on 32.77 kHz and, if sample rate reduction assign is used, this sample rate can be decreased down to 150 Hz or brought up to 48 kHz.

80 mA +12V
30 mA -12V
45 mm deep
Read more
MRP:$247.09 SAVE 21%
 2 in stock $195.84
Click for better price!
or call +44 20 7424 1960
quote 792156
Happy Nerding FX AID XL Multiple Audio Effects Module (silver faceplate)
Cat: 792161 Rel: 05 Oct 20
 
Multiple audio effects module
Notes: 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analog Dry/Wet control with dedicated CV input. High quality stereo signal pass. Separate modulation inputs for all three effect parameters plus Sample Rate Reducer (SRR) input - changes internal clock. Four user storable presets - stores selected program and all three controls. Spin FV-1 based.

The last used effect, and presets are always remembered.

32 effects are simultaneously available, but FX AID can be reflashed with other effects in any order.

Reflashing procedure is quite easy: playing 40 sec long "wav" file of line level amplitude to SRR input.

Reflashing mode: hold both buttons for 10 sec.

By default it runs on 32.77 kHz and, this sample rate can be decreased down to 150 Hz or brought up to 48 kHz via SRR input.

Please note the reverse CV operation of the Dry/Wet control: positive CV crossfades from Wet to Dry, and negative CV crossfades from Dry to Wet.

80 mA +12V
30 mA -12V
45 mm deep
Read more
MRP:$290.07 SAVE 19%
! low stock $233.89
Click for better price!
or call +44 20 7424 1960
quote 792161
Happy Nerding MMM VCF Moog Multi Mode Voltage Controlled Filter Module (black faceplate)
Cat: 799335 Rel: 11 Nov 20
 
Voltage controlled filter module
Notes: MMM VCMMM VCFF (M**g Multi Mode Voltage Controlled Filter) is a dual VCF having common controls for both parts. Thus it can be used as a stereo filter, or patched with different combinations of the available inputs/outputs. And all this functionality is packed in the compact 8 hp wide module.

MMM VCF has the famous transistor ladder core introduced by Bob Moog, but also features the added Band Pass and Low Pass modes, not available in the original design. Those extra modes are greatly widen the possible spectral modification of the input sound.

The module was carefully designed to have vanishingly small noise and bleed.

SPECIFICATIONS

FREQ: 20 Hz - 22 kHz - manual frequency range

RES: 35 Hz - 22 kHz - self oscillation range

FM: 0 - 7,5 V will modulate the whole hearing range at max settings

LP: 24 db/oct Low Pass output

BP: 12 db/oct Band Pass output

HP: 12 db/oct High Pass output

outputs impedance: 1 kOhm

module depth: 4 cm

width: 8 HP

power consumption: +42 mA / -40 mA at +/-12 Vdc
Read more
MRP:$229.64 SAVE 18%
 2 in stock $189.12
Click for better price!
or call +44 20 7424 1960
quote 799335
Artículos del 1 al 6 de 6 en la página 1 de 1

Filter

Happy Nerding
Release Date
Featured
Close