Ik Multimedia

Notes: Since we pioneered guitar amp & effects modelling in 2002, IK Multimedia has spent more time studying guitar and amp recording than possibly anyone else on the planet. Modelling over 400 pieces of gear has required tens of thousands of hours painstakingly measuring the interactions between instruments, pickups and amplifier circuits, not to mention the cooperation of the world's most iconic guitar players, amplifier manufacturers, and engineers to learn how to create and capture great guitar tones.

AXE I/O brings all that experience to you.

AXE I/O is a professional 2 in/5 out audio interface - and controller - designed specifically with the needs of the recording guitarist in mind, providing best-in-class sound quality and powerful features aimed squarely at making your recordings faster, easier and better than ever.

AXE I/O offers an exclusive triple-topology, fully discrete input circuit, with both PURE and JFET input stages, to go from transparent to tube-like with just a single switch.

Its patent-pending Z-Tone impedance-adapting circuit interacts with your guitar's pick-ups to give you a massive range of tonal flexibility, you've never heard before.

Plus AXE I/O includes a dedicated Amp Out, so you can process your recording with real guitar amps and stomps without the need for external accessories (and without having to unplug your existing connections!). This low-noise out also eliminates ground loops, to keep even the highest-gain re-amplification as quiet as possible.

And AXE I/O seamlessly integrates with the included AmpliTube 4 Deluxe to select presets and control values via the front input knob, and lets you connect pedals and switches to get the most from your virtual rig without ever taking your hands off your axe.

We even included an onboard tuner so you can be ready to record in an instant whenever inspiration strikes.

Every element of AXE I/O has been created with no-compromise quality and real-world usefulness.

It's the interface we wish we'd had all along.

Notes: AXE I/O ONE is the ultimate compact and affordable 1-in/3-out audio interface designed for guitarists, musicians and engineers who want the best sound possible for recording guitar or bass. It combines IK's patent-pending Z-Tone impedance control, an Amp Out for Tone Modeling, multiple circuit topologies, and award-winning AmpliTube and TONEX software for a complete digital studio rig.

AXE I/O ONE delivers professional audio with sample rates up to 192 kHz, 108 dB dynamic range, and 9 Hz-45 kHz frequency response.

AXE I/O ONE offers a simple, streamlined setup for Tone Modeling and re-amplification. Use the Amp Out to create a virtual Tone Model of your amp, cab or pedals including distortion, overdrive, EQ, Fuzz and boost. The Amp Out can also be used as a standard re-amping output for even more creative options.

AXE I/O ONE's main channel offers 3 different circuit topologies. This gives you three different options to dial in the perfect tone for any type of guitar pickup or style.

The PURE setting offers a completely transparent and ultra-accurate instrument preamp that won't colour your sound in any way.

Switching to the Class A JFET input buffer adds midrange focus, warmth and harmonic enhancement, giving you more tonal options from the same instrument.

ACTIVE pickups don't require a Hi-Z input, so this setting bypasses unnecessary gain stages to keep your signal path as direct, transparent and clean as possible.

AXE I/O ONE's patent-pending Z-Tone circuit lets you go from a tighter/sharper tone to a thicker bolder tone with a simple twist of a dial. Z-Tone changes the impedance from 1 MO ("sharp") down to 2.2 kO ("bold") giving you ultimate freedom to dial in the perfect feel and tone from electric guitar and bass pickups.

AXE I/O ONE offers a PURE mic preamp designed for transparent and clean recording. The mic preamp offers a wide, flat frequency response: 9 Hz to 45 kHz, +/- 0.5 dB (at 96 kHz) to avoid unwanted coloration and perfectly preserve the sonic character of your voice, acoustic guitar, piano or other instrument.

It's also ideal for capturing your rig with IK's groundbreaking TONEX AI-based Tone Modeling software. With both AmpliTube 5 SE and TONEX SE included, you'll have everything you need to record, model and play right out of the box, plus AXE I/O ONE works with all your favourite recording applications.

AXE I/O ONE offers a range of useful features including dedicated controller inputs that let you connect up to two expression pedals or two single/double switches to control AmpliTube, or any other software, in real-time without putting your hands down. You can also use AXE I/O ONE's MIDI input and output to connect floor controllers or iRig Stomp I/O to add even more real-time controls - or use it with regular keyboards and other standard MIDI gear.

Best-in-class guitar tone

Selectable Active/Passive/discrete JFET/PURE instrument preamp
Patent-pending Z-Tone input for a tonal palette never heard before
Amp Out for Tone Modeling or re-amplification
Connect up to 2 expression pedals, single and double-switches
Lightweight compact design for recording on the go
Includes AmpliTube SE, TONEX SE, and Ableton Live Lite

Premium studio sound

High-resolution, ultra-low-noise Class A microphone preamp
Best-in-class conversion and superior analog design
USB-C bus powered
108 dB dynamic range
Includes control software
High definition 24-bit/192kHz audio

Connections

1 in/3 out (one low-noise Amp Out)
1 ultra-low noise mic in/instrument in
2 balanced monitor outs
Reference headphones out
2 fully configurable external control inputs
MIDI input/output
USB 2.0 compatible with Mac/PC

Unit Width (mm): 160
Unit Height (mm): 52
Unit Depth (mm): 130
Unit Weight (kg): 0.37

Notes: Updated version of the hugely popular mobile audio interface. Just about as compact as it gets but with all the functionality you'd expect for getting quality sound in and out of mobile devices.

Supplier's Notes:
Make your go-to mic go farther

Like many of today's musicians, YouTubers, and broadcasters you probably rely on the professional sound quality you get from using an XLR microphone. But for mobile, on-the-go audio and video creation, XLR mics present some challenges. Many require phantom power, and at best, using them also means dragging along a laptop and boxy audio interface to get the mic preamps along with the phantom power you need.

iRig Pre 2 is a pocket-sized mic preamp that lets you easily use your XLR mics to record, perform and stream with your iPhone*, iPad, Android device or DSLR camera. The sequel to the best-selling mobile mic pre of all time, iRig Pre 2 delivers the same professional sound you're accustomed to, while adding direct monitoring, auto-switching wiring for use with digital cameras, and so much more.

All powered up

Need phantom power for your condenser mic? iRig Pre 2's 2 AA batteries provide true +48V phantom power (many other mobile mic preamps only offer 32V, degrading your mic's performance) for around 7 hours of continuous use.
To use your favorite dynamic or ribbon mic, simply turn off the phantom power and you're good to go for even longer, up to 20 hours!

Don't waste a take

A time-saving 3.5mm (1/8") headphone output now offers direct monitoring, so you can listen back to ensure the signal is perfect before you start recording or streaming!
It's perfect for all today's popular live-streaming and video recording apps, so you can hop from app to app with confidence you'll always sound your best.
And for DSLRs and digital cameras, it makes set up a snap without needing to dive into menus or set up alternate workarounds to monitor the sound.

Works in more situations

You can easily access your favorite apps while recording or performing by mounting the iRig Pre 2 to your mic stand or other convenient stage locations using the included Velcro strip slot. For secure mic stand mounting for your connected smartphone, tablet or digital camera, be sure to check out our iKlip series, which offers a choice of flexible-mounting options for a variety of scenarios.

Ready to rock, right out of the box

Even if you're new to mobile audio and video creation, you can get started right away by simply downloading two free IK Multimedia apps from the App store or Google Play: iRig Recorder FREE (our easy-to-use audio and video recording/editing app) and VocaLive FREE (our premium vocal processor for live performance and multi-track recording).
So get ready to break out of the box and start exploring the creative possibilities all around you, with the freedom of iRig Pre 2.

The Creator series from IK Multimedia puts you in the spotlight with fast and easy tools to help you create professional content. Its budget-friendly solutions are ideal for YouTubers, podcasters, live streamers and other social media platforms, and include a variety of mobile and studio-friendly microphones, interfaces and smartphone stands. With convenient features and flexible options, you'll be covered wherever and whenever inspiration strikes.

Technical Specifications:

Frequency response: from 20 Hz to 20 KHz +/- 1.5dB
EIN (@gain min): -113.5 dBA
EIN (@ gain max): -92.4dBA
THD+N: -90 dBA / 0,003%
Gain range: 48dB
Phantom max current: 6mA
Battery duration (Alkaline 2xAA): approx 20 hours when phantom is off, approx 7 hours when phantom is on

Includes:

iRig Pre 2
2xAA batteries
Velcro strip
Free apps for iOS and Android

Dimensions:

Size: 40mm/1.57" x 110mm/4.33" x 34mm/1.34"
Weight: 75g/2.65oz (batteries excluded)
Cables length: 40cm/15.75"

Compatibility:

iOS and Android Devices

Compatible with iPhone, iPad, iPod touch and Android devices with 1/8" / 3.5mm jack standard headset input (onboard or via adaptor) compliant with the CTIA/AHJ wiring standard.

DSLR Cameras

Compatible with most DSLR cameras equipped with 1/8" / 3.5mm jack microphone input.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Updated version of the hugely popular mobile audio interface. Just about as compact as it gets but with all the functionality you'd expect for getting quality sound in and out of mobile devices.

Supplier's Notes:
Make your go-to mic go farther

Like many of today's musicians, YouTubers, and broadcasters you probably rely on the professional sound quality you get from using an XLR microphone. But for mobile, on-the-go audio and video creation, XLR mics present some challenges. Many require phantom power, and at best, using them also means dragging along a laptop and boxy audio interface to get the mic preamps along with the phantom power you need.

iRig Pre 2 is a pocket-sized mic preamp that lets you easily use your XLR mics to record, perform and stream with your iPhone*, iPad, Android device or DSLR camera. The sequel to the best-selling mobile mic pre of all time, iRig Pre 2 delivers the same professional sound you're accustomed to, while adding direct monitoring, auto-switching wiring for use with digital cameras, and so much more.

All powered up

Need phantom power for your condenser mic? iRig Pre 2's 2 AA batteries provide true +48V phantom power (many other mobile mic preamps only offer 32V, degrading your mic's performance) for around 7 hours of continuous use.
To use your favorite dynamic or ribbon mic, simply turn off the phantom power and you're good to go for even longer, up to 20 hours!

Don't waste a take

A time-saving 3.5mm (1/8") headphone output now offers direct monitoring, so you can listen back to ensure the signal is perfect before you start recording or streaming!
It's perfect for all today's popular live-streaming and video recording apps, so you can hop from app to app with confidence you'll always sound your best.
And for DSLRs and digital cameras, it makes set up a snap without needing to dive into menus or set up alternate workarounds to monitor the sound.

Works in more situations

You can easily access your favorite apps while recording or performing by mounting the iRig Pre 2 to your mic stand or other convenient stage locations using the included Velcro strip slot. For secure mic stand mounting for your connected smartphone, tablet or digital camera, be sure to check out our iKlip series, which offers a choice of flexible-mounting options for a variety of scenarios.

Ready to rock, right out of the box

Even if you're new to mobile audio and video creation, you can get started right away by simply downloading two free IK Multimedia apps from the App store or Google Play: iRig Recorder FREE (our easy-to-use audio and video recording/editing app) and VocaLive FREE (our premium vocal processor for live performance and multi-track recording).
So get ready to break out of the box and start exploring the creative possibilities all around you, with the freedom of iRig Pre 2.

The Creator series from IK Multimedia puts you in the spotlight with fast and easy tools to help you create professional content. Its budget-friendly solutions are ideal for YouTubers, podcasters, live streamers and other social media platforms, and include a variety of mobile and studio-friendly microphones, interfaces and smartphone stands. With convenient features and flexible options, you'll be covered wherever and whenever inspiration strikes.

Technical Specifications:

Frequency response: from 20 Hz to 20 KHz +/- 1.5dB
EIN (@gain min): -113.5 dBA
EIN (@ gain max): -92.4dBA
THD+N: -90 dBA / 0,003%
Gain range: 48dB
Phantom max current: 6mA
Battery duration (Alkaline 2xAA): approx 20 hours when phantom is off, approx 7 hours when phantom is on

Includes:

iRig Pre 2
2xAA batteries
Velcro strip
Free apps for iOS and Android

Dimensions:

Size: 40mm/1.57" x 110mm/4.33" x 34mm/1.34"
Weight: 75g/2.65oz (batteries excluded)
Cables length: 40cm/15.75"

Compatibility:

iOS and Android Devices

Compatible with iPhone, iPad, iPod touch and Android devices with 1/8" / 3.5mm jack standard headset input (onboard or via adaptor) compliant with the CTIA/AHJ wiring standard.

DSLR Cameras

Compatible with most DSLR cameras equipped with 1/8" / 3.5mm jack microphone input.

Notes: Field recorder meets interface in this clever offering from IK's iRig range. Essentially a 4-in/2-out audio and MIDI interface with built-in mics, the Quattro is portable, versatile and high quality.

Supplier's Notes:
Pro recording and performing, in the palm of your hand

iRig Pro Quattro I/O is a professional-quality 4 in / 2 out portable audio and MIDI interface packed with everything needed for field recording and content creation, for serious sound and flexibility - anywhere.

Small enough to fit in the palm of your hand, the iRig Pro Quattro I/O still packs in four high-quality, low-noise mic preamps; instrument, RCA and TRS inputs; plus XLR balanced, 3.5mm stereo and headphone outputs - and full MIDI I/O!

iRig Pro Quattro I/O works right out of the box with iPhone, iPad, Android, Mac and PC, but can also serve as a stand-alone mic preamp or line mixer, with a built-in limiter and direct monitoring so you're always guaranteed the perfect take.

Packed with a swiss-army-knife's worth of tools, iRig Pro Quattro I/O ensures you're ready for anything, anywhere.

As a mobile interface

Connected to a computer or mobile device, the iRig Pro Quattro I/O will work as a high-quality, multi-channel audio and MIDI interface with a full array of inputs and outputs so you'll always be prepared for any recording or need. Fully MFi-certified, no adaptors are required for iPhone or iPad for reliable field performance on any device.

As a broadcast / podcast interface

Enable STEREO mode and iRig Pro Quattro I/O mixes all sources down to stereo for streaming or recording. Monitoring is easy thanks to a dedicated headphone output with independent volume control and direct monitoring. Or use MONO mode for streaming to social media; Loopback lets you duet your favourite videos easily.

As a field recording interface

With an onboard microphone and optional stereo mic capsules, iRig Pro Quattro I/O turns your iPhone, iPad, Android device into a full-featured, professional field recorder.

As a stand-alone mixer

iRig Pro Quattro I/O also works as a preamp and mixer: just power it via battery, USB or DC IN and use the full set of inputs/outputs to capture and mix multiple sources to your DSLR camera with professional quality.

Always perfect recordings with the safety backup channels

In STEREO and MONO mode, inputs 3 and 4 can be used as safety channels: recording the same signal as input 1 and 2 but reduced by 12dB as a backup in case the sound source unexpectedly overloads the main channels.

Audio quality without compromise... wherever you are

Up to 24-bit, 96 kHz sample rate Ultra-low-noise mic preamps with full +48v phantom power Professional-quality, transparent A/D and D/A conversion Built-in limiter, for input 1-2, to protect against clipping Multitrack, stereo or mono internal mixdown.

Specifications

Microphone Input
Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Microphone Input Level: from 6 mVpp to 1.4 Vpp
Microphone Input Impedance: 3.2 kOhms
Gain Range: 40 dB
Phantom Power: +48V i 4V
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS

Instrument Input
Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
Instrument Input Level: from 30 mVpp to 6.9 Vpp
Instrument Input Impedance: 1 MOhms
Gain Range: 27 dB
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS
Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Control numbered thumbwheel
Headphone Level Power 100mW into 50 Ohms

Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Power 100mW into 50 Ohms

MIDI Input/Output
Connector: 2x2.5mm TS Jack
Other Input/Output
DC barrel: 1x DC barrel. For power and device charging.
Device Connector: mini-DIN

Common
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz

Power:
- USB bus powered when used with a computer
- Battery powered (2xAA included) when used with an iOS device
- DC power supply (not included, iRig PSU 3A sold separately)*

Package includes
iRig Pro I/O universal Audio-MIDI interface
Lightning to Mini-DIN connection cable with charging features (60cm/23.62")
USB-A to Mini-DIN connection cable (60cm/23.62")
USB-C to Mini-DIN connection cable (60cm/23.62")
2.5mm TRS male to MIDI female adapter (10cm / 3.9")
2 x 1.5V AA Battery
Velcro strip

Dimensions
Size: 43mm/1.69" x 127mm/5" x 37mm/1.46"
Weight: 120g/4.23oz (batteries excluded)

Notes: *** B-STOCK: Box opened, but product is in excellent condition and in perfect working order ***


Field recorder meets interface in this clever offering from IK's iRig range. Essentially a 4-in/2-out audio and MIDI interface with built-in mics, the Quattro is portable, versatile and high quality.

Supplier's Notes:
Pro recording and performing, in the palm of your hand

iRig Pro Quattro I/O is a professional-quality 4 in / 2 out portable audio and MIDI interface packed with everything needed for field recording and content creation, for serious sound and flexibility - anywhere.

Small enough to fit in the palm of your hand, the iRig Pro Quattro I/O still packs in four high-quality, low-noise mic preamps; instrument, RCA and TRS inputs; plus XLR balanced, 3.5mm stereo and headphone outputs - and full MIDI I/O!

iRig Pro Quattro I/O works right out of the box with iPhone, iPad, Android, Mac and PC, but can also serve as a stand-alone mic preamp or line mixer, with a built-in limiter and direct monitoring so you're always guaranteed the perfect take.

Packed with a swiss-army-knife's worth of tools, iRig Pro Quattro I/O ensures you're ready for anything, anywhere.

As a mobile interface

Connected to a computer or mobile device, the iRig Pro Quattro I/O will work as a high-quality, multi-channel audio and MIDI interface with a full array of inputs and outputs so you'll always be prepared for any recording or need. Fully MFi-certified, no adaptors are required for iPhone or iPad for reliable field performance on any device.

As a broadcast / podcast interface

Enable STEREO mode and iRig Pro Quattro I/O mixes all sources down to stereo for streaming or recording. Monitoring is easy thanks to a dedicated headphone output with independent volume control and direct monitoring. Or use MONO mode for streaming to social media; Loopback lets you duet your favourite videos easily.

As a field recording interface

With an onboard microphone and optional stereo mic capsules, iRig Pro Quattro I/O turns your iPhone, iPad, Android device into a full-featured, professional field recorder.

As a stand-alone mixer

iRig Pro Quattro I/O also works as a preamp and mixer: just power it via battery, USB or DC IN and use the full set of inputs/outputs to capture and mix multiple sources to your DSLR camera with professional quality.

Always perfect recordings with the safety backup channels

In STEREO and MONO mode, inputs 3 and 4 can be used as safety channels: recording the same signal as input 1 and 2 but reduced by 12dB as a backup in case the sound source unexpectedly overloads the main channels.

Audio quality without compromise... wherever you are

Up to 24-bit, 96 kHz sample rate Ultra-low-noise mic preamps with full +48v phantom power Professional-quality, transparent A/D and D/A conversion Built-in limiter, for input 1-2, to protect against clipping Multitrack, stereo or mono internal mixdown.

Specifications

Microphone Input
Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Microphone Input Level: from 6 mVpp to 1.4 Vpp
Microphone Input Impedance: 3.2 kOhms
Gain Range: 40 dB
Phantom Power: +48V i 4V
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS

Instrument Input
Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
Instrument Input Level: from 30 mVpp to 6.9 Vpp
Instrument Input Impedance: 1 MOhms
Gain Range: 27 dB
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS
Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Control numbered thumbwheel
Headphone Level Power 100mW into 50 Ohms

Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Power 100mW into 50 Ohms

MIDI Input/Output
Connector: 2x2.5mm TS Jack
Other Input/Output
DC barrel: 1x DC barrel. For power and device charging.
Device Connector: mini-DIN

Common
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz

Power:
- USB bus powered when used with a computer
- Battery powered (2xAA included) when used with an iOS device
- DC power supply (not included, iRig PSU 3A sold separately)*

Package includes
iRig Pro I/O universal Audio-MIDI interface
Lightning to Mini-DIN connection cable with charging features (60cm/23.62")
USB-A to Mini-DIN connection cable (60cm/23.62")
USB-C to Mini-DIN connection cable (60cm/23.62")
2.5mm TRS male to MIDI female adapter (10cm / 3.9")
2 x 1.5V AA Battery
Velcro strip

Dimensions
Size: 43mm/1.69" x 127mm/5" x 37mm/1.46"
Weight: 120g/4.23oz (batteries excluded)

Notes: Deluxe version of the impressive iRig Pro Quattro features the same high-quality portable interface with the added bonus of a full complement of accessories, including mics and travel case.

Supplier's Notes:
***Note: This version of the iRig Pro Quattro I/O comes with 2 x Mic XY stereo microphones, foam windscreen, and a carry case. ***

Go pro all the way

For a little more, you get a lot with the iRig Pro Quattro I/O Deluxe edition. The value of the iRig XY stereo mic capsules alone is worth the upgrade. In addition to the pair of mics you'll get the optional power supply, which you can also use to keep your iOS device charged during extended sessions. Plus you'll get a custom carrying case to protect and transport your Quattro I/O and XY mics wherever your field work takes you.

Pro recording and performing, in the palm of your hand

iRig Pro Quattro I/O is a professional-quality 4 in / 2 out portable audio and MIDI interface packed with everything needed for field recording and content creation, for serious sound and flexibility - anywhere.

Small enough to fit in the palm of your hand, the iRig Pro Quattro I/O still packs in four high-quality, low-noise mic preamps; instrument, RCA and TRS inputs; plus XLR balanced, 3.5mm stereo and headphone outputs - and full MIDI I/O!

iRig Pro Quattro I/O works right out of the box with iPhone, iPad, Android, Mac and PC, but can also serve as a stand-alone mic preamp or line mixer, with a built-in limiter and direct monitoring so you're always guaranteed the perfect take.

Packed with a swiss-army-knife's worth of tools, iRig Pro Quattro I/O ensures you're ready for anything, anywhere.

As a mobile interface

Connected to a computer or mobile device, the iRig Pro Quattro I/O will work as a high-quality, multi-channel audio and MIDI interface with a full array of inputs and outputs so you'll always be prepared for any recording or need. Fully MFi-certified, no adaptors are required for iPhone or iPad for reliable field performance on any device.

As a broadcast / podcast interface

Enable STEREO mode and iRig Pro Quattro I/O mixes all sources down to stereo for streaming or recording. Monitoring is easy thanks to a dedicated headphone output with independent volume control and direct monitoring. Or use MONO mode for streaming to social media; Loopback lets you duet your favourite videos easily.

As a field recording interface

With an onboard microphone and optional stereo mic capsules, iRig Pro Quattro I/O turns your iPhone, iPad, Android device into a full-featured, professional field recorder.

As a stand-alone mixer

iRig Pro Quattro I/O also works as a preamp and mixer: just power it via battery, USB or DC IN and use the full set of inputs/outputs to capture and mix multiple sources to your DSLR camera with professional quality.

Always perfect recordings with the safety backup channels

In STEREO and MONO mode, inputs 3 and 4 can be used as safety channels: recording the same signal as input 1 and 2 but reduced by 12dB as a backup in case the sound source unexpectedly overloads the main channels.

Audio quality without compromise... wherever you are

Up to 24-bit, 96 kHz sample rate Ultra-low-noise mic preamps with full +48v phantom power Professional-quality, transparent A/D and D/A conversion Built-in limiter, for input 1-2, to protect against clipping Multitrack, stereo or mono internal mixdown.

Dimensions

Size: 160mm/6.29" x 90mm/3.54" x 40mm/1.57"
Weight: 340g/11.99oz (without batteries)
Cable length: 60cm/23.62"

Box contents

iRig Pro Quattro I/O
1/4" thread adapter
4x AA Batteries (alkaline)
iOS Lightning to mini-DIN cable
USB-A to mini-DIN cable
2.5mm jack to MIDI female adapter
2 iRig MIC XY stereo microphones
Windscreen
9V PSU
Travel case

Notes: ***B-STOCK: Box opened, product in perfect working order***


The bestseller goes digital

iRig USB gives guitar and bass players an affordable and easy way to practice, play and record at home or on the go. This digital version of IK's widely popular iRig 2 features a sleek new enclosure with USB-C connectivity and comes bundled with IK's latest amp and effects modelling technology.
Easily record ideas or jam along to your favourite backing tracks with killer tones and without the need of any other gear. When it's time to play out loud, iRig USB offers a dedicated Amp Out so you can use your device tones with a real rig for playing and performing.

Whether it's through headphones or loudspeakers, iRig USB makes playing fun again and inspiring wherever you go.

Key features

Compact audio interface for guitar or bass
Works with iPad, Mac, PC and iPhone 15*
1/8" headphones out for silent practice
1/4" Amp out connects to your amp or pedalboard
Works with your favourite learning, practice and recording apps
Packed with AmpliTube & TONEX amp modelling apps
Powered by your device, no batteries required
*Lightning devices require Apple's Lightning to USB 3 Camera Adapter

Ultra-compact with big sound

iRig USB is small enough to fit in your pocket, yet features a wide frequency response and dynamic range on the instrument input to work with any guitar or bass, active or passive. Setting your level is quick and easy using the large gain control knob with clipping indicator. And for listening back, both the Headphone Out and Amp Out offer exceptional sound quality for a device this size.

Play more, learn faster

Practicing should be fun and inspiring. Use iRig USB anywhere and connect to the most popular learning apps while playing through the best amp models. Use the included TONEX and AmpliTube apps to load one of your go-to tones then launch your preferred app to study music, tabs or the original song. It's never been easier to make progress on your guitar journey.

Rcording ideas

Next time inspiration hits, launch your favourite app and start recording in seconds. iRig USB is recognized by all desktop and iOS** recording apps. TONEX and AmpliTube for Mac/PC both work standalone or as plug-ins inside your favourite DAW so it's easy to record a DI or a processed guitar part. On mobile devices, you can use iRig USB to record a DI or record a processed guitar part with the included TONEX or AmpliTube CS for iPhone and iPad.

**with iOS lightning device, the iRig USB will require a CCK connector/adapter.

Exclusive software included

iRig USB is ideal for exploring new sounds for guitar and bass. With Mac/PC and iOS versions of both TONEX and AmpliTube included, you'll always have your dream rig with you for practicing and recording.

TONEX SE gives you the power of AI Machine Modelling and comes loaded with 200 Premium Tone Models, which are captures of real amps and pedals, plus you can browse, demo and download unlimited Tone Models from ToneNET. You can even use TONEX software for capturing your own amp and pedals to use at home, on the go and inside AmpliTube 5.

AmpliTube 5 SE for Mac/PC plus AmpliTube for iOS offer the ultimate tone processing and recording studio. Both versions give you essential amps, effects and speaker cabs to create amazing guitar and bass tones. Play, practice and record on your desktop or mobile device with the most authentic and hyper-realistic gear models ever made.

Jamming out with friends

No more lugging a pedalboard to rehearsal spaces or someone's garage. Access to all your favourite tones is right in your pocket. Just show up, connect iRig USB's Amp Out jack to an external amplifier or powered monitor and start playing incredible-sounding AmpliTube presets or TONEX Tone Models from your iOS device (or laptop).

Grow wherever you go

Whatever your level and style of music, iRig USB will keep you connected to the newest and best tools for sounding great, learning new songs, advancing as a player and recording ideas. Sound better, play more and improve faster throughout a lifetime of guitar with iRig USB.

Common

AD and DA resolution: 24-bit
Sampling rate: 44.1 kHz and 48 kHz
Host connection: USB Type-C socket

Instrument Input

Input impedance: 500 kOhms
Maximum input level: +13.5 dBu
Frequency response: From 20 Hz to 20 kHz within 0.5 dB (48 kHz sample rate)
Dynamic range: 90 dB(A)

Amp Output

Configuration: Unbalanced
Output impedance: 3.3 kOhms
Frequency response: From 10 Hz to 20 kHz within 1 dB (48 kHz sample rate)
Dynamic range: 97 dB(A)

Headphone Output

Output impedance: 22 Ohms
Maximum output level: approx 6mW into 50 Ohms load
Frequency response: From 10 Hz to 20kHz within 1 dB (48 kHz sample rate)
Dynamic range: 94 dB(A)

Package includes

iRig USB interface
USB-C to USB-C cable (60 cm/23.62")

Dimensions

Size: 99 mm/3.9" x 42 mm/1.65" x 25 mm/0.98"
Weight: 54 g/1.9 oz.

Compatibility

Computers

Mac: macOS 10.6 or later. One free USB port.

Windows: Windows 10 or later. One free USB port. For low latency, the IK Multimedia's iRig audio driver must be installed.

iOS Devices

Compatible with iPhone and iPad devices with USB-C connector.

Also compatible with iPhone and iPad devices with Lightning connector using Apple's Lightning to USB 3 Camera Adapter.

Android Devices

Compatible with Android devices running Android 5 or later and with USB digital audio capabilities.