Moog

Notes: This is an extruded aluminum Eurorack case with wood sides (no modules included). Up to 1.9" module depth. Requires separate Eurorack power module for use.

Includes sliding nuts and screws.

Notes: Expand your modular setup or start constructing your first Eurorack system with this easy-to-use, plug-and-play Moog Powered Eurorack Case.

The Moog Powered Eurorack Case features 10 Eurorack-compatible 16-pin power connectors and is designed for low-noise performance, high efficiency, and convenient input voltage compatibility. To ensure the cleanest power for your favourite modules, the Moog Powered Eurorack Case's power supply circuit is designed with an additional layer of high-frequency noise filtering at each individually isolated power connector. Electrostatic discharge and overloading protection on the power input and power output sections keep your gear even further safeguarded.

To make connecting your modules even easier, the Moog Powered Eurorack Case features multiple power indicator LEDs to alert you if any of your power cables are not properly connected and need re-orienting, ensuring your system is fully operational before finally screwing in all of your modules.

Mount your modules perfectly every time with the included sliding nuts and mounting screws. Once assembled, all modules can be turned on or off as a system using the rear-mounted power on/off button.

Featuring a durable aluminium case with wood sides, the Moog Powered Eurorack Case offers a versatile solution for expanding your setup of Moog's semi-modular family of synthesizers (Mother-32, DFAM, Subharmonicon, Mavis), and the case's angled extrusion mounts into Moog 2-Tier, 3-Tier, and 4-Tier Rack Kits.

Just add your favourite modules to get started on your first (or next) modular system!

Specs

Type: Powered Eurorack Case
HP Size: 104HP
Module Depth: 48mm along the mounting rails, 44mm over the connectors
Materials: Aluminum case with wood end caps
Power Supply: Yes. 10 Power Connectors, LED Power indicators, protections for ESD, overload, and noise leakage. External On/Off switch.
Power Output: +12V/1000mA, -12V/1000mA, +5V/1000mA

In the box

Powered Eurorack Case 104HP
7 inch 10-to-16 Pin Ribbon Power Cable
30 Module Mounting Screws
Power Supply
IEC Cable
Powered Eurorack Case Manual
Product Catalogue
Registration Postcard

Weights & dimensions

Product only

Weight (lbs) 3.40 lbs
Weight (kg) 1.54 kg
Imperial (in) 3.86" H x 21.5" W x 5"D
Metric (cm) 9.84 cm H x 54.61 cm W x 12.7 cm D

Product in box:

Weight (lbs) 6.28 lbs
Weight (kg) 2.85kg
Imperial (in) 6.75" H x 28.25" W x 8.25"D
Metric (cm) 17.14cm H x 73.03cm W x 20.95cm D

Notes: Protect your Moog semi-modular synths when not in use. This water-repellent dust cover is made from rugged Ballistic Cordura to safeguard your gear from dust, spills, and other studio (and stage) mishaps, while the ultra-soft interior remains gentle against your synth.

This protective cover is custom fit with room to accommodate patch cabling and rear I/O panel access. Adjustable Velcro straps ensure your dust cover fits snug and stays in place.

The 2-Tier Dust Cover is a perfect fit for any two 60HP Moog semi-modular synthesizers mounted together in a Moog 2-Tier Rack.

In the box

1x 2-Tier Dust Cover

Technical specs

Fits on Moog 60HP 2-Tier system racks.

Weights & dimensions

Product only

Weight (lbs) 0.45 lbs
Weight (kg) 0.20 kg

Imperial (in) 13.8" H x 5.9" W x 1.2" D
Metric (cm) 35 cm H x 15 cm W x 3 cm D

Product in box

Weight (lbs) 0.47 lbs
Weight (kg) 0.20 kg

Imperial (in) 5" H x 13" W x 2" D
Metric (cm) 12.7 cm H x 33.0 cm W x 5 cm D

Notes: Protect your Moog semi-modular synths when not in use. This water-repellent dust cover is made from rugged Ballistic Cordura to safeguard your gear from dust, spills, and other studio (and stage) mishaps, while the ultra-soft interior remains gentle against your synth.

This protective cover is custom fit with room to accommodate patch cabling and rear I/O panel access. Adjustable Velcro straps ensure your dust cover fits snug and stays in place.

The 3-Tier Dust Cover is a perfect fit for 60HP Moog semi-modular synthesizers mounted in a Moog 3-Tier Rack.

In the box

1x 3-Tier Dust Cover

Technical specs

Fits on Moog 60HP 3-Tier system racks.

Weights & dimensions

Product only

Weight (lbs) .59 lbs
Weight (kg) .27 kg

Imperial (in) 14" H x 6" W x 2" D
Metric (cm) 35.5 cm H x 15.2 cm W x 5.0 cm D

Product in box

Weight (lbs) .60 lbs
Weight (kg) .27 kg

Imperial (in) 6.5" H x 12.5" W x 2" D
Metric (cm) 16.5 cm H x 31.7 cm W x 5 cm D

Notes: Expand your modular setup or start constructing your first Eurorack system with this easy-to-use, plug-and-play Moog Powered Eurorack Case.

The Moog Powered Eurorack Case features 10 Eurorack-compatible 16-pin power connectors and is designed for low-noise performance, high efficiency, and convenient input voltage compatibility. To ensure the cleanest power for your favourite modules, the Moog Powered Eurorack Case's power supply circuit is designed with an additional layer of high-frequency noise filtering at each individually isolated power connector. Electrostatic discharge and overloading protection on the power input and power output sections keep your gear even further safeguarded.

To make connecting your modules even easier, the Moog Powered Eurorack Case features multiple power indicator LEDs to alert you if any of your power cables are not properly connected and need re-orienting, ensuring your system is fully operational before finally screwing in all of your modules.

Mount your modules perfectly every time with the included sliding nuts and mounting screws. Once assembled, all modules can be turned on or off as a system using the rear-mounted power on/off button.

Featuring a durable aluminium case with wood sides, the Moog Powered Eurorack Case offers a versatile solution for expanding your setup of Moog's semi-modular family of synthesizers (Mother-32, DFAM, Subharmonicon, Mavis), and the case's angled extrusion mounts into Moog 2-Tier, 3-Tier, and 4-Tier Rack Kits.

Just add your favourite modules to get started on your first (or next) modular system!

Specs

Type: Powered Eurorack Case
HP Size: 60HP
Module Depth: 48mm along the mounting rails, 44mm over the connectors
Materials: Aluminium case with wood end caps
Power Supply: Yes. 10 Power Connectors, LED Power indicators, protections for ESD, overload, and noise leakage. External On/Off switch.
Power Output: +12V/1000mA, -12V/1000mA, +5V/1000mA

In the box

Powered Eurorack Case 60HP
7 inch 10-to-16 Pin Ribbon Power Cable
30 Module Mounting Screws
Power Supply
IEC Cable
Powered Eurorack Case Manual
Product Catalogue
Registration Postcard
Moog Sticker

Weights & dimensions

Product only:

Weight (lbs) 2.22 lbs
Weight (kg) 1.00 kg
Imperial (in) 3.86" H x 12.5" W x 5"D
Metric (cm) 9.84 cm x 31.75 cm W x 12.7 cm D

Product in box:

Weight (lbs) 4.87 lbs
Weight (kg) 2.20 kg
Imperial (in) 6.75" H x 20.5" W x 8.25"D
Metric (cm) 17.14cm H x 52.07cm W x 20.95 cm D

Notes: ***B-STOCK: Box opened, product in perfect working order***


Expand your modular setup or start constructing your first Eurorack system with this easy-to-use, plug-and-play Moog Powered Eurorack Case.

The Moog Powered Eurorack Case features 10 Eurorack-compatible 16-pin power connectors and is designed for low-noise performance, high efficiency, and convenient input voltage compatibility. To ensure the cleanest power for your favourite modules, the Moog Powered Eurorack Case's power supply circuit is designed with an additional layer of high-frequency noise filtering at each individually isolated power connector. Electrostatic discharge and overloading protection on the power input and power output sections keep your gear even further safeguarded.

To make connecting your modules even easier, the Moog Powered Eurorack Case features multiple power indicator LEDs to alert you if any of your power cables are not properly connected and need re-orienting, ensuring your system is fully operational before finally screwing in all of your modules.

Mount your modules perfectly every time with the included sliding nuts and mounting screws. Once assembled, all modules can be turned on or off as a system using the rear-mounted power on/off button.

Featuring a durable aluminium case with wood sides, the Moog Powered Eurorack Case offers a versatile solution for expanding your setup of Moog's semi-modular family of synthesizers (Mother-32, DFAM, Subharmonicon, Mavis), and the case's angled extrusion mounts into Moog 2-Tier, 3-Tier, and 4-Tier Rack Kits.

Just add your favourite modules to get started on your first (or next) modular system!

Specs

Type: Powered Eurorack Case
HP Size: 60HP
Module Depth: 48mm along the mounting rails, 44mm over the connectors
Materials: Aluminium case with wood end caps
Power Supply: Yes. 10 Power Connectors, LED Power indicators, protections for ESD, overload, and noise leakage. External On/Off switch.
Power Output: +12V/1000mA, -12V/1000mA, +5V/1000mA

In the box

Powered Eurorack Case 60HP
7 inch 10-to-16 Pin Ribbon Power Cable
30 Module Mounting Screws
Power Supply
IEC Cable
Powered Eurorack Case Manual
Product Catalogue
Registration Postcard
Moog Sticker

Weights & dimensions

Product only:

Weight (lbs) 2.22 lbs
Weight (kg) 1.00 kg
Imperial (in) 3.86" H x 12.5" W x 5"D
Metric (cm) 9.84 cm x 31.75 cm W x 12.7 cm D

Product in box:

Weight (lbs) 4.87 lbs
Weight (kg) 2.20 kg
Imperial (in) 6.75" H x 20.5" W x 8.25"D
Metric (cm) 17.14cm H x 52.07cm W x 20.95 cm D

Notes: This is an extruded aluminum Eurorack case with wood sides (no modules included). Up to 1.9" module depth. Requires separate Eurorack power module for use.

Includes sliding nuts and screws.

Notes: DFAM is the first addition to the Mother-32 family of synthesizers and presents an expressive hands-on approach to percussive pattern creation. It requires no patching, and absolutely no experience is needed for human-beings of any age to quickly begin synthesizing new and unique rhythmic compositions.

Activated by an easy-to-use analogue sequencer, DFAM's emotive sound begins with a white noise generator and two wide-range analogue oscillators - effortlessly transitioning between rhythmic pulsations, resounding bass and resonant bells in an instant. DFAM's distinctive voice is then shaped by a classic Moog Ladder filter with two selectable modes: Low Pass mode imparts impact and dimension to each sound it touches, while High Pass mode opens the door to naturally expressive strikes, spikes and clangorous accentuations.

DFAM behaves much like a living organism, reacting in different ways to different individuals. 3 dedicated analogue envelopes work dynamically with the sequencer to ensure that tribal toms breathe, industrial impacts evolve, and cacophonous chaos can be spawned or subdued at the turn of a knob.Each DFAM ships with a package of Moog patch cables that unlock access to the 24-point modular patchbay. Use it to create new sounds or bizarre behaviours, synchronize an unlimited number of DFAM and Mother-32 units together, or fully integrate your analogue instrument into a modular Eurorack production environment.

Through exploration and experimentation, the vast potential of this expressive analogue instrument is realised.

Specifications

Sound engine: Analogue
Analogue sequencer: 8-Steps With Pitch and Velocity Per-Step
Sequencer panel controls: Tempo, Run/Stop, Trigger, Advance
Sound sources: 2 Oscillators With Square and Triangle Waveforms, 1 White Noise Generator, 1 External Audio Input
Frequency control: +/- 5 Octaves (10 Octave Range)
Mixer: Level controls for Oscillator 1, Oscillator 2 and White Noise/External Audio Input
Filter: 20Hz-20KHz Switchable Low Pass / High Pass 4-Pole Transistor Ladder Filter

Notes: High quality universal expression pedal for keyboards, synthesizers, and instrument pedals.

Rugged Expression Pedal for Your Pedals and Synths

The EP-3 is a robust and reliable universal expression pedal designed to work with any keyboard, synthesizer, or pedal with an expression or CV input. It features a newly designed cam system with extremely smooth performance and durability, a polarity switch that ensures compatibility with non-Moog products, a scalable output knob for specifying musical range, and a 1/4" output jack on the front panel that allows you to use the supplied 6.5' cable, or select a different cable length that perfectly suits your needs.

The EP-3 is built to withstand the rigors of daily abuse and touring, while providing the action and feel you need for precise, musical expression. When paired with Minifooger or Moogerfooger analog effects, the EP-3 unlocks new dimensions of sonic possibilities.

Weight: 2.6lbs
Boxed dimensions: 4" x 3 1/2" x 12 1/2"
Polarity: Selectable
Supplied cable: 6.5' 1/4" TRS - TRS

Notes: Replacement power supply for Etherwave theremin.

Notes: The theremin is one of the oldest electronic instruments, and the only one known that you play without touching. Moving your hands in the space around its antennas controls pitch and volume. The Etherwave is an authentic adaptation of inventor Lev Termen's original design.

The Etherwave is a quality musical instrument designed for ruggedness and portability. It has a 5-octave pitch range and reliable spacing between notes for sophisticated playability. Antennas are nickel-plated 3/8" brass tube and cabinets are furniture-grade hardwood, finished with a custom Moog stain. The Etherwave is fitted with an adapter for mounting on a standard microphone stand and works best with Moog's TB-15 instrument amplifier.

All Etherwaves ship with 2 video tutorials on one DVD: Clara Rockmore: the Greatest Theremin Virtuosa and Mastering the Theremin, featuring Lydia Kavina.

The power supply is included: 220V for use in Europe, Asia, South America and Australia. 220V Etherwave ships with DVD in PAL format.

http://www.youtube.com/watch?v=4nM9UpBBPhI

Notes: The latest in a series of iconic instruments from Moog, the Etherwave Theremin harks back to the very start of Bob Moog's career but introduces modern touches and CV outputs to control modular gear.

Supplier's Notes:
Moog's Etherwave Standard and Etherwave Plus set the bar of performance theremin design over the last two decades. Now, the all-time highest selling theremin models get an update to become simply the Moog Etherwave Theremin.

Combining analogue playability with unprecedented performance potential, Moog's Etherwave Theremin provides an accurate five-octave pitch range and balanced spacing between notes for a highly sophisticated degree of playability.

Updated analogue electronics have been used to create Bob Moog's classic theremin circuit design while improving bass response in the lower registers.

The refined cabinet features hand-finished hardwood and two quickrelease plated-brass antennas. Additionally, rear-panel I/O connections and a detachable mic stand adapter ensure quick setup on the go.

Easily accessible front-panel controls allow for spontaneous changes in timbre, and the antennas' response can be adjusted to suit any player and their environment (advanced users can go a step further via the calibration access panel on top of the instrument).

A front panel headphone output-with dedicated volume control-pairs with the addition of a Mute button that silences the main audio output, while leaving the headphone output active for privately adjusting timbre and tuning. In addition, Etherwave Theremin can connect directly to-and control-your other modular, semi-modular, and Eurorack synthesizer systems via CV (Control Voltage).

Control your synthesizers or effects while playing the theremin by patching into Etherwave Theremin's 3.5mm Pitch CV, Volume CV, and Gate CV jacks for a completely new performance experience.

Technical specs:

Sound Source: Analogue Heterodyning Oscillator
Sound Modifier: Analogue VCA
Pitch Antenna: Performance control of the frequency range, from approximately 0 Hz to 4.2 kHz, based on hand proximity
Volume Antenna: Performance control of the dynamic range of over 70dB, based on hand proximity
Mute Button: On: Audio Out muted; Phones Out active
Off: All outputs active
Switch Jack: 1/4" jack for momentary footswitch (not included)
controls Mute function
Power: LED indicator (front panel); Button (rear panel)
Headphones: 1/4" output jack
Audio Out: 1/4" Audio output jack
CV Out: 3.5mm jacks for Volume CV Out, Pitch CV Out, Gate CV Out
Power Supply: Style: wall adapter; barrel connection; center-pin positive
Input: 100 - 240VAC; 50 Hz - 60 Hz
Output: +12VDC; 2A

In the box

Etherwave Theremin
Detachable Pitch Antennae
Detachable Volume Antennae
Calibration Tool
Power Supply
Quickstart Guide
User's Manual
Product Catalog ue
Registration Card

Weights & dimensions

Product only

Weight (lbs): 6.3 lbs
Weight (kg): 2.85 kg
Imperial (in) With Antennas: 18.73" H x 26.81" W x 6.59" D
Metric (cm) With Antennas: 47.58 cm H x 17.72 cm W x 16.74 cm D
Imperial (in) Without Antennas: 3.31" H x 17.72" W x 6.26" D
Metric (cm) Without Antennas: 8.4 cm H x 45 cm W x 15.9 cm D

Product in box
Weight (lbs): 9.6 lbs
Weight (kg): 4.35 kg
Imperial (in): 9.5" H x 21.25" W x 6.5" D
Metric (cm): 24.13 cm H x 53.97 cm W x 16.51 cm D

Notes: The Moog SR Series Etherwave Case is here to safeguard your Moog Etherwave Theremin where you need it most and ensure your sound travels far and wide.

Musicians report the most important performance a case can offer is protection from impact and protection from water - in that order. With that in mind, the Moog SR Series Cases have been developed to be the first line of defense for your instrument.

The Moog SR Series Etherwave Case features generous padding around a semi-rigid ABS shell with fitted antenna tray, a rugged Ballistic Cordura outer that resists tears and abrasions and laminated water-resistant zippers to offer on-the-go protection and safe storage for your instrument.The adjustable shoulder strap and reinforced handle keep your commute comfortable, and a multifunction front pocket ensures you're organized on arrival.

This Moog SR Series Case is a perfect fit for your Etherwave Theremin.

Note: Please note that the SR Series Etherwave Case was made custom for the 2022 Etherwave and will not fit previous models of Etherwave Theremins.

Specifications

External Materials: Ballistic Cordura, Water-resistant laminated zippers
Internal Materials: Semi-Rigid ABS, Foam padding
Handles/Straps: 1 x Handle, 1 x Removable shoulder strap,
1 x Strap for use with rolling luggage handle
Pockets: 1 x Exterior zip pocket with nested velcro accessory pockets
Other: Molded tray for pitch and volume antenna storage

Weights & dimensions

Product only

Inner Dimensions
Imperial (in) 17.71" W x 5.9" L x 2.6" D
Metric (cm) 45 cm W x 15 cm L x 6.5 cm D

Outer Dimensions
Imperial (in) 19.69" W x 7.87" L x 6.30" D
Metric (cm) 50 cm W x 20 cm L x 16 cm D

Unboxed Weight *Doesn't ship in an individual box
Weight (lbs) 3.9 lbs
Weight (kg) 1.77 kg

Notes: The Moog Gig Bag is ideal for Voyager Rack Mount Edition and Moogerfoogers.

Finally, a flexible gig bag that is is durable enough to safely transport your prized Moog gear. Interchangeable Velcro dividers can be configured to create many useful compartments. For example, store up to 5 x Moogerfoogers with plenty of room for accessories, or take your Voyager Rack Mount Edition on the road with utmost confidence that it is well-protected. Many other configurations allow for extra storage solutions.

Notes: Protect your Moog Grandmother when not in use. This water repellant dust cover is made from rugged Ballistic Cordura to safeguard your gear from dust, spills, and other studio (and stage) mishaps, while the ultra-soft interior remains gentle against your synth. Custom fit with an expandable panel to accommodate patch cabling and a Velcro flap for rear I/O panel access.

In the box

1x Grandmother Dust Cover

Technical specs

Fits on Moog Grandmother Synthesizers. Made of water repellant and tear resistant Ballistic Cordura.

Weights & dimensions

Product only

Weight (lbs) .98 lbs
Weight (kg) .45 kg

Imperial (in) 7.9" H x 11.8" W x 3.1" D
Metric (cm) 30 cm H x 20 cm W x 8 cm D

Product in box

Weight (lbs) .99 lbs
Weight (kg) .45 kg

Imperial (in) 8" H x 12" W x 2" D
Metric (cm) 20.3 cm H x 30.4 cm W x 5 cm D

Notes: Another Moog classic, drawing on the brand's extensive modular synth heritage to create a semi-modular analogue powerhouse. Available here in the classy Dark Series colour scheme.

Supplier's Notes:
Grandmother Dark is a new color variant for Moog Grandmother. Grandmother Dark presents the same great features, sounds, and specs as the original colorful Grandmother, now offered in an all-black color scheme that invokes the timeless look of Moog's classic modular control panels.

Grandmother is a sonic playground that harkens back to Moog's modular roots, where synthesis is not only about the end result, but the journey of discovery and experimentation. While capable of highly complex sounds and modulation, Grandmother's semi-modular design requires absolutely no patching, ensuring that human beings of any skill-level can easily explore and experience the joys and magic of analog synthesis.

Inspired by the classic Moog modular synthesizers that came before it, Grandmother's sound engine, modulation engine and onboard spring reverb tank are completely analog, resulting in an unrestricted sonic vocabulary of immeasurable beauty and power. In addition, Grandmother also features an easy to use Arpeggiator and Sequencer for added enjoyment and programmable syncopation.

Though not required, creative patching and exploration are the keys to discovering exciting new relationships between modules and to truly unlocking Grandmother's infinite expanse of auditory inspiration. Patching can also be used to override internal connections, allowing each section to function just as an independent module would.

In addition to its standalone function, Grandmother is also an ideal analog audio processor for external sound sources, and a powerful keyboard front end for expanding a Mother-32, DFAM or Eurorack modular system.

WHAT'S IN THE BOX:

Grandmother Dark
Manual
Patch Cables (2x 6/12/18/24")
Registration Card
Drawstring Bag
IEC Cable
Power Brick
Instrument Catalog

WEIGHT
18 lbs.

DIMENSIONS
23"W x 14 1/4" D x 5 1/2" H

POWER
Included Power Adapter 12V, 2A -100 to 240 Volts AC, 50/60Hz

Notes: Grandmother is a semi-modular analogue synthesizer with a built-in arpeggiator, sequencer and spring reverb tank. Start playing immediately with "no patching required", and then explore an infinite sonic playground with Grandmother's reconfigurable front panel. Grandmother's circuits, spring reverb, and spirit are inspired by the classic Moog Modular Synthesizers, making this instrument a powerful addition to a Mother-32, DFAM or any Eurorack modular system.

Grandmother is a sonic playground that harkens back to Moog's modular roots, where synthesis is not only about the end result, but the journey of discovery and experimentation. While capable of highly complex sounds and modulation, Grandmother's semi-modular design requires absolutely no patching, ensuring that human beings of any skill-level can easily explore and experience the joys and magic of analogue synthesis.

Inspired by the classic Moog modular synthesizers that came before it, Grandmother's sound engine, modulation engine and onboard spring reverb tank are completely analogue, resulting in an unrestricted sonic vocabulary of immeasurable beauty and power. In addition, Grandmother also features an easy to use Arpeggiator and Sequencer for added enjoyment and programmable syncopation.

Though not required, creative patching and exploration are the keys to discovering exciting new relationships between modules and to truly unlocking Grandmother's infinite expanse of auditory inspiration. Patching can also be used to override internal connections, allowing each section to function just as an independent module would.

In addition to its standalone function, Grandmother is also an ideal analogue audio processor for external sound sources, and a powerful keyboard front end for expanding a Mother-32, DFAM or Eurorack modular system.

Specifications

Type: Semi-Modular Analog Synthesizer
Sound engine: Analogue
Number of keys: 32 Full-Size Keys
Type of keys: Velocity-sensing (Velocity signal is not hard-wired - available via MIDI and KBD VEL OUT jack)
Other controllers: Pitch Bend, Mod Wheel, Variable Glide
Polyphony: Monophonic
Sound sources: 2 Oscillators with selectable Waveforms (Oscillator 2 supports Sync to Oscillator 1 plus linear FM), 1 White Noise Generator, External Input jack

Notes: Moog SR Series Cases are here to safeguard your Moog Grandmother synthesizer where you need it most and ensure your sound travels far and wide.

Developed with artists for artists

Musicians report the most important performance a case can offer are protection from impact and protection from wateriin that order. With that in mind, Moog SR Series Cases have been developed to be the first line of defense for your synthesizer.

Complete protection, comfort, and convenience

Moog SR Series Cases feature generous padding around a semi-rigid ABS shell, a rugged Ballistic Cordura outer that resists tears and abrasions, and laminated water-resistant zippers to offer on-the-go protection and safe storage for your instrument. Multiple strap and handle configurations keep your commute comfortable, and multifunction pockets ensure you're organized on arrival.

Moog SR Series Cases are a perfect fit for your Moog Grandmother synthesizer.

Specs

Internal material: Padded plush liner
External materials: Durable abrasion resistant 1680D Cordura, water-resistant. Laminated zippers, reinforced stitching and metal rivets
Handles/straps: (2) Smooth and durable webbed handles (top and side) with reinforced stitching - Removable anti-slip shoulder strap, - Removable air-mesh padded backpack straps

*** Please note: the synthesisers in the pictures are not included, they are shown for demonstration purposes only. ***

Notes: Top off your Moog semi-modular instruments with custom-designed Moog-style knobs. This knob kit is a perfect fit for 6mm diameter knurled pots commonly found on synthesizers, featuring an internal interface to lock the knob in place when assembled-without the need for a set screw. The Moog Knob Kit for Knurled Pots comes with twenty-five (25) knobs in each package, so you can stylize all your favorite Eurorack modules and Moog semi-modular instruments.

Specs

Fits 6mm diameter knurled pots on Moog semi-modular products and others
Internal grip pattern prevents slipping
25 x Classic Moog-styled knobs

Weights & dimensions

Product only

Weight (lbs): 0.0008 lbs
Weight (kg): 0.0004 kg
Imperial (in): .39" H x .34" W x .34" D
Metric (cm): 1.00 cm H x .86 cm W x .86 cm D

Notes: Designed to protect your prized instrument. The Moog Little Phatty Gig Bag will give you the confidence to transport it freely and safely.

The Moog Little Phatty Gig Bag is made of heavy-duty nylon material, with double-stitched construction. With padded interior and exterior pockets for extra storage, the gig bag manages your musical gear with ease.

Shoulder strap, backpack straps and an easy to carry handle offers flexibility when traveling. Also, the bag is specifically sized for the Little Phatty, has 3/ 4" foam all around and contains internal velcro straps to keep it from sliding.

Notes: The Little Phatty is one of the coolest cats around, and you can keep yours free of dust and other unsightly debris with this super-cool Little Phatty Dust Cover.

Crafted from vinyl and lined with fleece, the Little Phatty Dust Cover protects your Little Phatty from dust, dirt, spills, and other dangers lurking around the studio and stage. Elastic in the corners keeps the Little Phatty Dust Cover securely in place over your prized synth. A Moog logo adorns the top of the Little Phatty Dust cover.

Notes: The Moog Little Phatty Molded ATA Case is a rugged yet lightweight case for transporting your Moog Little Phatty instrument.

Protect your investment when you're on the road. The Moog Little Phatty Molded ATA Case is designed to meet ATA specifications. It is custom fitted to the Voyager.

Redesigned with rugged, heavy duty recessed wheels, the Moog Little Phatty Molded ATA Case stands up to the most rigorous touring schedules. An internal compartment, large enough for storing cables and other accessories, round out the features of the Moog Little Phatty Molded ATA Case.

Notes: 100% cotton, men's regular fit black short sleeve basic crew tee.

Notes: 100% cotton, men's regular fit black short sleeve basic crew tee.

Notes: 100% cotton, men's regular fit black short sleeve basic crew tee.

Notes: Protect your Moog Matriarch when not in use. This water repellant dust cover is made from rugged Ballistic Cordura to safeguard your gear from dust, spills, and other studio (and stage) mishaps, while the ultra-soft interior remains gentle against your synth. Custom fit with an expandable panel to accommodate patch cabling and a Velcro flap for rear I/O panel access.

In the box

1x Matriarch Dust Cover

Technical specs:

Fits on Moog Matriarch Synthesizers. Made of water repellant and tear resistant Ballistic Cordura.

Weights & dimensions

Product only

Weight (lbs) .98 lbs
Weight (kg) .44 kg

Imperial (in) 7.9" H x 17.1" W x 3.1" D
Metric (cm) 43 cm H x 20 cm W x 8 cm D

Product in box

Weight (lbs) 1.00 lbs

Weight (kg) .45 kg

Imperial (in) 8" H x 15" W x 2" D

Metric (cm) 20.3 cm H x 38.1 cm W x 5 cm D

Notes: All-new black look as the Matriarch semi-modular synth joins Moog's Dark Series. Classy looks inspired by the brand's vintage synths, classy modern take on the Moog sound.

Supplier's Notes:
Matriarch Dark is a new color variant for Moog Matriarch. Matriarch Dark presents the same great features, sounds, and specs as the original colorful Matriarch, now offered in an all-black color scheme that invokes the timeless look of Moog's classic modular control panels.

Matriarch is an analog synthesizer with an emphasis on imagination. The pinnacle of Moog's semi-modular family of synthesizers, Matriarch's patchable architecture and classic Moog circuits reward open exploration with endless sonic possibilities and unparalleled analog sound.

Easily create rich harmonic shapes with up to 4 notes of paraphony that can be sequenced, shifted, and stored with Matriarch's intuitive 256 step sequencer, or stack the analog VCOs to play on a massive 4 oscillator mono synth.

With a deep assortment of synthesis modules based on Bob Moog's original circuit designs, Matriarch's 100% analog signal path spans a dynamic sonic vocabulary - from overdriven monophonic bass to gently evolving paraphonic plucks that cycle through waveshapes into a wash of infinite delay trails . Coupling the power of vintage-designed stereo ladder filters, dual Envelope Generators, stereo Analog Delays, and stereo VCAs, Matriarch delivers a multi-dimensional sound that empowers the sonic exploration of space and time.

Though Matriarch's semi-modular design requires absolutely no patching, 90 modular patch points are easily accessible throughout the panel via the included 3.5mm patch cables. This powerful electronic instrument is a highly-versatile addition to any stage or studio that can effortlessly transform from a performance keyboard into a fully modular analog synthesizer at a moment's notice.

In addition to its standalone function, Matriarch is also an ideal processor of external sound sources and a powerful keyboard front-end for expanding a DFAM, Mother-32, Grandmother, or Eurorack modular system.

MODULE-PROVENANCE:
Oscillators based on the Minimoog
Mixer based on the classic CP3 module
Filters based on the classic 904A module
Envelopes based on the classic 911 module
VCAs based on the classic 902 module
Analog Delay based on the MF-104M and 500 Series effects

WHAT'S IN THE BOX:
Matriarch Dark
Manual
Patch Cables: (2x 6/12/18/24")
Registration Card
Drawstring Bag
IEC Cable
Power Brick
Instrument Catalog

SPECS:
TYPE-- Semi-Modular Analog Synthesizer
SOUND-ENGINE-- 100% Analog
NUMBER-OF-KEYS-- 49 Full-Size Keys
TYPE-OF-KEYS-- Velocity-sensing with Aftertouch (Velocity and After-touch are not hard-wired - available via MIDI, KBD VEL OUT and KB AT OUT jacks)
OTHER-CONTROLLERS-- Pitch Bend, Mod Wheel, Variable Glide, Expres-sion pedal in to CV out, and Sustain Pedal in
POLYPHONY-- Monophonic, 2-Note Paraphonic, and 4-Note Paraphonic SOUND-SOURCES-- 4x Analog Oscillators with Selectable Waveforms (Os-cillators 2, 3, and 4 support Hard Sync), White Noise Generator, External Input jack.
MIXER-- 6 input (5 eurorack level and 1 instrument level) DC coupled dis-crete mixer with
asymmetrical clipping behavior
FILTERS-- 24dB/Octave Low Pass Filter with Resonance, 24dB/Octave switchable Low
Pass/High Pass Filter with Resonance. Configurable in parallel (HP/LP), stereo (LP/LP), and series (HP/LP).
MOD-SOURCES-- Analog Modulation Oscillator with selectable and patchable output (Sine, Saw, Ramp, Square, Stepped Triangle, Smoothed Random, Sample and Hold, Noise). Additional LFO (Tri, Square)
ENVELOPES-- 2x Four-Stage ADSR with End of Envelope gate outputs
ATTENUATORS-- 3x Bipolar Voltage Controlled Attenuators with Ring Mod capabilities
MULTS-- 2x4 Parallel-wired Non-buffered Patch Points
VCAs-- 2x discrete analog VCAs routed in stereo
EFFECTS-- Stereo Analog Delay with Ping/Pong, MIDI and CV clock sync, voltage controlled Mix, and independent L/R delay times, feedback, and I/O.
ARPEGGIATOR-O-STEP-SEQUENCER-- 256 Steps with up to 4 notes per step; 12
Sequence locations
PATCH-POINTS-- 90 x 3.5mm front and rear panels, 49 Inputs, 33 Outputs, 2x4 Parallel-wired Mults.
PEDAL-INPUTS-- 1/4" Sustain, 1/4" Expression
AUDIO-INPUT-- 1/4" TS jack (Rear Panel)
AUDIO-OUTPUTS-- 2x 1/4" TS jacks for line level output (Rear Panel), 1/4" Headphone jack with dedicated level knob (rear panel), 2x 3.5mm Eurorack level outputs, 2x 3.5mm Delay outputs
MIDI-IOO-- 5-pin DIN In, Out, Thru; plus MIDI over USB (Rear Panel)
DIMENSIONS-- 32" (81.28cm) Wide x 14 1/4" (36.19cm) Deep x 5 1/2" (13.97cm) High
POWER-- Included Power Adapter 12V DC (positive tip), 2A, 100 to 240 Volts AC, 50/60Hz with screw-on barrel connector.
WEIGHT-- 24lbs. / 10.89kg

Notes: Moog Matriarch is a patchable 4-note paraphonic analog synthesizer with a built-in Sequencer, Arpeggiator, stereo Ladder Filters, and stereo Analog Delay. Create rich evolving chord patterns immediately with "no patching required", then tap into an abundance of inspiring textures, new sounds, and an endless supply of happy accidents through Matriarch's 90 modular patch points. Based on the vintage circuitry of classic Moog synthesizer modules, Matriarch is a catalyst for creative ideas and a medium for multidimensional expression.

Matriarch is an analog synthesizer with an emphasis on imagination. The pinnacle of Moog's semi-modular family of synthesizers, Matriarch's patchable architecture and vintage Moog circuits reward open exploration with endless sonic possibilities and unparalleled analog sound.

Easily create rich harmonic shapes with up to 4 notes of paraphony that can be sequenced, saved, and shifted with Matriarch's intuitive 256 step sequencer, or stack the analog VCOs to play on a massive 4 oscillator mono synth.

With a deep assortment of synthesis modules based on Bob Moog's original circuit designs, Matriarch's 100% analog signal path spans a dynamic sonic vocabulary - from overdriven monophonic bass to gently evolving paraphonic plucks that cycle through waveshapes into a wash of infinite delay trails. Coupling the power of vintage stereo ladder filters, dual Envelope Generators, stereo Analog Delays, and stereo VCAs, Matriarch delivers a multidimensional sound that empowers the sonic exploration of space and time.

Though Matriarch's semi-modular design requires absolutely no patching, 90 modular patch points are easily accessible throughout the panel via the included 3.5mm patch cables. This powerful electronic instrument is a highly-versatile addition to any stage or studio that can effortlessly transform from a performance keyboard to a fully modular analog synthesizer at a moment's notice.

In addition to its standalone function, Matriarch is also an ideal processor of external sound sources and a powerful keyboard front-end for expanding a DFAM, Mother-32, Grandmother, or Eurorack modular system.

FEATURES
VOICE MODE
Mono, duo, and 4-note paraphonic playability
ANALOG DELAY
Stereo analog delay w/ up to 700ms of MIDI sync-able stereo or ping/pong style repeats
SEQUENCER
256 step sequencer w/ up to 4 notes per step and 12 stored patterns. Can be decoupled from Matriarch to independently sequence external gear.
ARPEGGIATOR
Arpeggiator with selectable modes (Order, Forward/Backward, Random).
SEMI-MODULAR DESIGN
Semi-modular analog synthesizer - no patching required.
FULL LIST
SPECIFICATIONS
TYPE
Semi-Modular Analog Synthesizer
SOUND ENGINE
100% Analog
NUMBER OF KEYS
49 Full-Size Keys
TYPE OF KEYS
Velocity-sensing with Aftertouch (Velocity and Aftertouch are not hard-wired - available via MIDI, KBD VEL OUT and KB AT OUT jacks)
OTHER CONTROLLERS
Pitch Bend, Mod Wheel, Variable Glide, Expression pedal in to CV out, and Sustain Pedal in
POLYPHONY
Monophonic, 2-Note Paraphonic, and 4-Note Paraphonic

Notes: Moog SR Series Cases are here to safeguard your Moog Matriarch synthesizer where you need it most and ensure your sound travels far and wide.

Developed with artists for artists

Musicians report the most important performance a case can offer are protection from impact and protection from wateriin that order. With that in mind, Moog SR Series Cases have been developed to be the first line of defense for your synthesizer.

Complete protection, comfort, and convenience

Moog SR Series Cases feature generous padding around a semi-rigid ABS shell, a rugged Ballistic Cordura outer that resists tears and abrasions, and laminated water-resistant zippers to offer on-the-go protection and safe storage for your instrument. Multiple strap and handle configurations keep your commute comfortable, and multifunction pockets ensure you're organized on arrival.

Moog SR Series Cases are a perfect fit for your Moog Matriarch synthesizer.

Specifications

Internal material: Padded plush liner
External materials: Durable abrasion resistant 1680D Cordura, water-resistant. Laminated zippers, reinforced stitching and metal rivets
Padding: Semi-rigid ABS, generous foam padding
Handles/straps: (2) Smooth and durable webbed handles (top and side) with reinforced stitching - Removable anti-slip shoulder strap, - Removable air-mesh padded backpack straps

*** Please note: the synthesisers in the pictures are not included, they are shown for demonstration purposes only. ***

Notes: ***B-STOCK: Box opened, product in perfect working order***


Killer value from Moog's entry-level synth. Easy to assemble from a few components (no soldering required), then explore the classic Moog sound with Eurorack-compatible semi-modular patch points.

Supplier's Notes:
Mavis is a build-it-yourself analogue synthesizer kit that delivers the huge depth of sound Moog is known for in a compact and feature-packed instrument. Assembly is extremely simple; users of any skill level can quickly assemble their own analogue synthesizer with minimal tools and experience. Perfect for first time users and established synthesists alike, Mavis' semi-modular design and 1-octave keyboard will get you started making sound immediately without the need for additional equipment (except for a speaker or headphones). As a stand-alone instrument, Mavis is a straightforward analogue synthesizer with patchable modular utilities and the unmistakable Moog sound and quality. Easily remove Mavis from its case and it becomes a 24-point CV controllable module (44hp) ready to be installed into your Eurorack system or alongside Moog's other semi-modular instruments. Mixing the familiar with the exotic, Mavis features Moog's legendary oscillator and filter circuits alongside a diode wavefolder - the first analogue wavefolder to appear on a Moog instrument. Combining traditional subtractive synthesis with additive wavefolding and oozing with personality, Mavis' clever presentation of synthesis modules and utilities ensure deep creative synergy and musical connection.
Mavis is a powerful, fun, and low-cost Moog that makes learning synthesis or expanding an already-advanced studio setup approachable for anyone looking to explore classic analogue sound in a new way.

Built-in keyboard with Glide and KB scaling

As a standalone instrument or as a 44HP Eurorack module, Mavis adds an expressive 1 v/o controller to any setup with the flexibility to dial in experimental new pitch relationships via the KB scale knob and explore musical intervals that go beyond the established standards.

Full Range Analogue Oscillator

A Voltage Controllable Oscillator with PWM (Pulse Width Modulation), Waveform mixing, and Mod Source mixing, delivers rich harmonic character and motion.

Voltage Controlled Filter

Sculpt your sound with the -24-dB Moog Low Pass Ladder Filter, delivering the sonic power behind the distinct sounds of Moog basslines and leads.

Audio Rate LFO and 4-Stage Envelope Generator

Mavis uses crossfaders in its modulation routing instead of switches, allowing you to blend between a variable shape LFO and four stage envelope generators for interesting and unusual modulation contours.

Wavefolding and Modular Utilities

Mavis features Moog's first-ever wavefolding circuit, allowing for additive synthesis to sit alongside traditional subtractive synthesis, and features a broad modular utilities section complete with attenuators, offsets, mults, and a flexible DC-coupled mixer.

Patchable Sample and Hold (S+H) circuit:

Generates a random CV pattern that can be patched to modulate other parameters, including setting Mavis into a "random sequencing" mode of performance.

24-Point Patch Bay

Mavis is eager to play along with other voltage-controlled devices (especially with Moog's other semi-modular instruments), and its useful collection of utilities and flexible control voltage routing allow for intricate dialogue between them.

Protective Cover

Mavis includes a fitted protective cover for use during studio downtime or taking your instrument on the go.

Build one yourself. Get closer to the circuits at the heart of Mavis and come away with a Moog analogue synthesizer that is uniquely "yours". No soldering is required and can be completed by any skill level in an afternoon.

This compact yet mighty synthesizer with classic Moog circuitry, a built-in keyboard, 24 patch points, and an all-analogue sound engine-complete with Moog's first-ever wavefolding circuit-offers great value to any synthesist.

Specs

Operates standalone or as 44hp Eurorack module
Analogue Voltage Controlled Oscillator (Mixable Saw/Square)
Analogue -24dB Moog Low Pass Ladder Filter
4-stage Analog EG (Envelope Generator)
Diode Wavefolder
Analog LFO (Mixable Triangle / Square)
Pulse Width Modulation
Modular Utilities (Attenuators, Offsets, Mults, and a flexible DC-Coupled Mixer)
Sample & Hold
Analog Voltage Controlled Amplifier
24-Point Patch Bay (3.5 mm)
1 Octave Keyboard w/ Glide and Scaling
Protective Cover Included
Patch Cables Included
3.5mm Output

In the box

Mavis PCB, Front Panel, Bottom Enclosure, Protective Cover, Calibration Tool, Nut Driver, Fastener Kit, Power Supply, Package of 3.5mm cables (6" x5), Assembly Instructions / Quickstart Guide, Patch Overlays, Product Catalogue, Registration Card

Weight & dimensions

Product only

Weight (lbs): 0.94 lbs
Weight (kg): 0.43 kg
Imperial (in): 9" x 5 14" x 1 1/2"
Metric (cm): 22.86cm x 13.34cm x 3.81cm

Product in box

Weight (lbs): 3.3 lbs
Weight (kg): 1.5 kg
Imperial (in): 12 14" x 7 1/2" x 7"
Metric (cm): 31.13cm x 19.05cm x 17.78cm

Notes: ***B-STOCK: Box opened, product assembled and in perfect working order***


Killer value from Moog's entry-level synth. Easy to assemble from a few components (no soldering required), then explore the classic Moog sound with Eurorack-compatible semi-modular patch points.

Supplier's Notes:
Mavis is a build-it-yourself analogue synthesizer kit that delivers the huge depth of sound Moog is known for in a compact and feature-packed instrument. Assembly is extremely simple; users of any skill level can quickly assemble their own analogue synthesizer with minimal tools and experience. Perfect for first time users and established synthesists alike, Mavis' semi-modular design and 1-octave keyboard will get you started making sound immediately without the need for additional equipment (except for a speaker or headphones). As a stand-alone instrument, Mavis is a straightforward analogue synthesizer with patchable modular utilities and the unmistakable Moog sound and quality. Easily remove Mavis from its case and it becomes a 24-point CV controllable module (44hp) ready to be installed into your Eurorack system or alongside Moog's other semi-modular instruments. Mixing the familiar with the exotic, Mavis features Moog's legendary oscillator and filter circuits alongside a diode wavefolder - the first analogue wavefolder to appear on a Moog instrument. Combining traditional subtractive synthesis with additive wavefolding and oozing with personality, Mavis' clever presentation of synthesis modules and utilities ensure deep creative synergy and musical connection.
Mavis is a powerful, fun, and low-cost Moog that makes learning synthesis or expanding an already-advanced studio setup approachable for anyone looking to explore classic analogue sound in a new way.

Built-in keyboard with Glide and KB scaling

As a standalone instrument or as a 44HP Eurorack module, Mavis adds an expressive 1 v/o controller to any setup with the flexibility to dial in experimental new pitch relationships via the KB scale knob and explore musical intervals that go beyond the established standards.

Full Range Analogue Oscillator

A Voltage Controllable Oscillator with PWM (Pulse Width Modulation), Waveform mixing, and Mod Source mixing, delivers rich harmonic character and motion.

Voltage Controlled Filter

Sculpt your sound with the -24-dB Moog Low Pass Ladder Filter, delivering the sonic power behind the distinct sounds of Moog basslines and leads.

Audio Rate LFO and 4-Stage Envelope Generator

Mavis uses crossfaders in its modulation routing instead of switches, allowing you to blend between a variable shape LFO and four stage envelope generators for interesting and unusual modulation contours.

Wavefolding and Modular Utilities

Mavis features Moog's first-ever wavefolding circuit, allowing for additive synthesis to sit alongside traditional subtractive synthesis, and features a broad modular utilities section complete with attenuators, offsets, mults, and a flexible DC-coupled mixer.

Patchable Sample and Hold (S+H) circuit:

Generates a random CV pattern that can be patched to modulate other parameters, including setting Mavis into a "random sequencing" mode of performance.

24-Point Patch Bay

Mavis is eager to play along with other voltage-controlled devices (especially with Moog's other semi-modular instruments), and its useful collection of utilities and flexible control voltage routing allow for intricate dialogue between them.

Protective Cover

Mavis includes a fitted protective cover for use during studio downtime or taking your instrument on the go.

Build one yourself. Get closer to the circuits at the heart of Mavis and come away with a Moog analogue synthesizer that is uniquely "yours". No soldering is required and can be completed by any skill level in an afternoon.

This compact yet mighty synthesizer with classic Moog circuitry, a built-in keyboard, 24 patch points, and an all-analogue sound engine-complete with Moog's first-ever wavefolding circuit-offers great value to any synthesist.

Specs

Operates standalone or as 44hp Eurorack module
Analogue Voltage Controlled Oscillator (Mixable Saw/Square)
Analogue -24dB Moog Low Pass Ladder Filter
4-stage Analog EG (Envelope Generator)
Diode Wavefolder
Analog LFO (Mixable Triangle / Square)
Pulse Width Modulation
Modular Utilities (Attenuators, Offsets, Mults, and a flexible DC-Coupled Mixer)
Sample & Hold
Analog Voltage Controlled Amplifier
24-Point Patch Bay (3.5 mm)
1 Octave Keyboard w/ Glide and Scaling
Protective Cover Included
Patch Cables Included
3.5mm Output

In the box

Mavis PCB, Front Panel, Bottom Enclosure, Protective Cover, Calibration Tool, Nut Driver, Fastener Kit, Power Supply, Package of 3.5mm cables (6" x5), Assembly Instructions / Quickstart Guide, Patch Overlays, Product Catalogue, Registration Card

Weight & dimensions

Product only

Weight (lbs): 0.94 lbs
Weight (kg): 0.43 kg
Imperial (in): 9" x 5 14" x 1 1/2"
Metric (cm): 22.86cm x 13.34cm x 3.81cm

Product in box

Weight (lbs): 3.3 lbs
Weight (kg): 1.5 kg
Imperial (in): 12 14" x 7 1/2" x 7"
Metric (cm): 31.13cm x 19.05cm x 17.78cm

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Killer value from Moog's entry-level synth. Easy to assemble from a few components (no soldering required), then explore the classic Moog sound with Eurorack-compatible semi-modular patch points.

Supplier's Notes:
Mavis is a build-it-yourself analogue synthesizer kit that delivers the huge depth of sound Moog is known for in a compact and feature-packed instrument. Assembly is extremely simple; users of any skill level can quickly assemble their own analogue synthesizer with minimal tools and experience. Perfect for first time users and established synthesists alike, Mavis' semi-modular design and 1-octave keyboard will get you started making sound immediately without the need for additional equipment (except for a speaker or headphones). As a stand-alone instrument, Mavis is a straightforward analogue synthesizer with patchable modular utilities and the unmistakable Moog sound and quality. Easily remove Mavis from its case and it becomes a 24-point CV controllable module (44hp) ready to be installed into your Eurorack system or alongside Moog's other semi-modular instruments. Mixing the familiar with the exotic, Mavis features Moog's legendary oscillator and filter circuits alongside a diode wavefolder - the first analogue wavefolder to appear on a Moog instrument. Combining traditional subtractive synthesis with additive wavefolding and oozing with personality, Mavis' clever presentation of synthesis modules and utilities ensure deep creative synergy and musical connection.
Mavis is a powerful, fun, and low-cost Moog that makes learning synthesis or expanding an already-advanced studio setup approachable for anyone looking to explore classic analogue sound in a new way.

Built-in keyboard with Glide and KB scaling

As a standalone instrument or as a 44HP Eurorack module, Mavis adds an expressive 1 v/o controller to any setup with the flexibility to dial in experimental new pitch relationships via the KB scale knob and explore musical intervals that go beyond the established standards.

Full Range Analogue Oscillator

A Voltage Controllable Oscillator with PWM (Pulse Width Modulation), Waveform mixing, and Mod Source mixing, delivers rich harmonic character and motion.

Voltage Controlled Filter

Sculpt your sound with the -24-dB Moog Low Pass Ladder Filter, delivering the sonic power behind the distinct sounds of Moog basslines and leads.

Audio Rate LFO and 4-Stage Envelope Generator

Mavis uses crossfaders in its modulation routing instead of switches, allowing you to blend between a variable shape LFO and four stage envelope generators for interesting and unusual modulation contours.

Wavefolding and Modular Utilities

Mavis features Moog's first-ever wavefolding circuit, allowing for additive synthesis to sit alongside traditional subtractive synthesis, and features a broad modular utilities section complete with attenuators, offsets, mults, and a flexible DC-coupled mixer.

Patchable Sample and Hold (S+H) circuit:

Generates a random CV pattern that can be patched to modulate other parameters, including setting Mavis into a "random sequencing" mode of performance.

24-Point Patch Bay

Mavis is eager to play along with other voltage-controlled devices (especially with Moog's other semi-modular instruments), and its useful collection of utilities and flexible control voltage routing allow for intricate dialogue between them.

Protective Cover

Mavis includes a fitted protective cover for use during studio downtime or taking your instrument on the go.

Build one yourself. Get closer to the circuits at the heart of Mavis and come away with a Moog analogue synthesizer that is uniquely "yours". No soldering is required and can be completed by any skill level in an afternoon.

This compact yet mighty synthesizer with classic Moog circuitry, a built-in keyboard, 24 patch points, and an all-analogue sound engine-complete with Moog's first-ever wavefolding circuit-offers great value to any synthesist.

Specs

Operates standalone or as 44hp Eurorack module
Analogue Voltage Controlled Oscillator (Mixable Saw/Square)
Analogue -24dB Moog Low Pass Ladder Filter
4-stage Analog EG (Envelope Generator)
Diode Wavefolder
Analog LFO (Mixable Triangle / Square)
Pulse Width Modulation
Modular Utilities (Attenuators, Offsets, Mults, and a flexible DC-Coupled Mixer)
Sample & Hold
Analog Voltage Controlled Amplifier
24-Point Patch Bay (3.5 mm)
1 Octave Keyboard w/ Glide and Scaling
Protective Cover Included
Patch Cables Included
3.5mm Output

In the box

Mavis PCB, Front Panel, Bottom Enclosure, Protective Cover, Calibration Tool, Nut Driver, Fastener Kit, Power Supply, Package of 3.5mm cables (6" x5), Assembly Instructions / Quickstart Guide, Patch Overlays, Product Catalogue, Registration Card

Weight & dimensions

Product only

Weight (lbs): 0.94 lbs
Weight (kg): 0.43 kg
Imperial (in): 9" x 5 14" x 1 1/2"
Metric (cm): 22.86cm x 13.34cm x 3.81cm

Product in box

Weight (lbs): 3.3 lbs
Weight (kg): 1.5 kg
Imperial (in): 12 14" x 7 1/2" x 7"
Metric (cm): 31.13cm x 19.05cm x 17.78cm

Notes: As a stand-alone instrument, Mavis is a straightforward analogue synthesizer with patchable modular utilities and the unmistakable Moog sound and quality. Easily remove Mavis from its case and it becomes a 24-point CV controllable module (44hp) ready to be installed into your Eurorack system or alongside Moog's other semi-modular instruments.

Mixing the familiar with the exotic, Mavis features Moog's legendary oscillator and filter circuits alongside a diode wavefolder - the first analogue wavefolder to appear on a Moog instrument. Combining traditional subtractive synthesis with additive wavefolding and oozing with personality, Mavis' clever presentation of synthesis modules and utilities ensure deep creative synergy and musical connection.

Mavis is a powerful, fun, and low-cost Moog that makes learning synthesis or expanding an already-advanced studio setup approachable for anyone looking to explore classic analogue sound in a new way.

Get closer to the circuits at the heart of Mavis and come away with a Moog analogue synthesizer that is uniquely "yours". No soldering is required and can be completed by any skill level in an afternoon.

A powerhouse on its own, Mavis was also designed to enhance any interconnected Moog semi-modular setup or Eurorack system. In 44HP, the synthesizer offers incredible value with two oscillators, full ADSR, ladder filter, sample and hold, wavefolding, attenuators, mixer, mults, and much more for more complex musical arrangements.

Mavis is eager to play along with other voltage-controlled devices (especially with Moog's other semi-modular instruments), and its useful collection of utilities and flexible control voltage routing allows for intricate dialogue between them.

Built-in keyboard with Glide and KB scaling

As a standalone instrument or as a 44HP Eurorack module, Mavis adds an expressive 1 v/o controller to any setup with the flexibility to dial in experimental new pitch relationships via the KB scale knob and explore musical intervals that go beyond the established standards.

Full Range Analog Oscillator

A Voltage Controllable Oscillator with PWM (Pulse Width Modulation), Waveform mixing, and Mod Source mixing, delivers rich harmonic character and motion.

Voltage Controlled Filter

Sculpt your sound with the -24-dB Moog Low Pass Ladder Filter, delivering the sonic power behind the distinct sounds of Moog basslines and leads.

Audio Rate LFO and 4-Stage Envelope Generator

Mavis uses crossfaders in its modulation routing instead of switches, allowing you to blend between a variable shape LFO and four stage envelope generators for interesting and unusual modulation contours.

Wavefolding and Modular Utilities

Mavis features Moog's first-ever wavefolding circuit, allowing for additive synthesis to sit alongside traditional subtractive synthesis, unlocking sounds not heard from a Moog before. Mavis also features a broad modular utility section complete with attenuators, offsets, mults, and a flexible DC-coupled mixer providing the tools needed for creative patching and sound design.

Patchable Sample and Hold (S+H) circuit:

Generates a random CV pattern that can be patched to modulate other parameters, including setting Mavis into a "random sequencing" mode of performance.

24-Point Patch Bay

Mavis is eager to play along with other voltage-controlled devices (especially with Moog's other semi-modular instruments), and its useful collection of utilities and flexible control voltage routing allow for intricate dialogue between them.

Protective Cover

Mavis includes a fitted protective cover for use during studio downtime or taking your instrument on the go.

Specs

Type: Semi Modular Analog Synthesizer - Operate standalone or as 44hp Eurorack module
Polyphony: Monophonic
Keypad: 1 Octave Keypad w/ Glide and Scaling
Sound sources: Analogue Voltage Controlled Oscillator (Mixable Saw/Square)
Filter: Analogue -24dB Moog Low Pass Ladder Filter
Envelope: 4-stage Analog EG (Envelope Generator)
Wavefolder: Diode Wavefolder
LFO: Analogue LFO (Mixable Triangle / Square)
Modular utilities: Sample and Hold, Attenuators, Offsets, Mults, and a flexible DC-Coupled Mixer
Patch bay: 24-Point Patch Bay (3.5 mm)
Accessories: Protective Cover, Patch Cables, Calibration Tool, and Nut Driver Included

Notes: ***B-STOCK: Box opened, product in perfect working order***


The MF-102 Ring Modulator is a direct descendant of the original Moog modular synthesizers. It contains 3 x complete modular functions: a ring modulator, a voltage-controlled carrier oscillator and voltage-controlled dual-waveform LFO. It can be used to process any instrument-level to line-level signal.

A ring modulator produces sum and difference frequencies between the audio input and a carrier oscillator. The ring modulator's LFO can be used to modulate the carrier frequency. The Moogerfooger ring modulator can create effects ranging from subtle tremolo to harmonically rich distortion, gong-like sounds, sweeps, swoops, and divebombs. It can be subtle, or outlandish in its use, you decide.

The Moogerfooger Ring Modulator's control parameters are signal mix, carrier frequency, LFO rate, and LFO amount. All of the ring modulator's parameters can be controlled by the great feeling knobs that beg to be tweaked as well as with expression pedals or external control voltages. Panel switches select LFO waveform and carrier frequency range. 1/4" jacks are provided for audio input and output, pedal/control inputs, carrier input and carrier output. The heavy-duty yet smooth acting bypass switch allows tabletop or floor use.

Imagine that the ring modulator's carrier oscillator is producing a 500 Hz sine wave, and your input signal is a 100 Hz sine wave. The ring modulator's output will be a complex waveform. You will hear 2 x pitches: 400 Hz and 600 Hz. You will not hear your original input or the carrier oscillator.

www.youtube.com/watch?v=ED4ugecZm0Q

Notes: Protect Your Minimoog Model D

The Minimoog Model D SR Series Case features generous padding around a semi-rigid ABS shell, a rugged Ballistic Cordura outer that resists tears and abrasions, and laminated water-resistant zippers to offer on-the-go protection and safe storage for your instrument. Multiple strap and handle configurations keep your commute comfortable, and multifunction pockets ensure you're organized on arrival.

Developed with Artists for Artists

Musicians report the most important performance a case can offer are protection from impact and protection from water... in that order. With that in mind, Moog SR Series Cases have been developed to be the first line of defense for your synthesizer.

Complete Protection, Comfort, and Convenience

Multiple strap and handle configurations keep your commute comfortable, and multifunction pockets ensure you're organized on arrival.

Notes: Protect Your Minimoog Model D

This water-repellant dust cover is made from rugged Ballistic Cordura to safeguard your gear from dust, spills, and other studio (and stage) mishaps, while the ultra-soft interior remains gentle against your synth. This cover is designed to fit your Model D with the control panel in the "down" position and features a Velcro flap for rear I/O panel access.

Notes: Originally released in 1970, Minimoog Model D was the world's first portable synthesizer and served as the archetype for all electronic keyboards that followed. The all-analog instrument gained acclaim for combining the colossal sound of the 1960s Moog modular synthesizers with the accessibility of pre-wired modulesimeaning that it could be played instantly and intuitively with no patch cables required. It was quickly embraced by a diverse roster of performers, with artists like Herbie Hancock, Kraftwerk, Rick Wakeman, Sun Ra, Piero Umiliani, Giorgio Moroder, Bernie Worrell, and Gary Numan all shaping unique sounds and forging new musical genres using the instrument.

More than a half-century since its invention, Minimoog Model D is back in production at the Moog factory in Asheville, North Carolina. An exceptional sonic tool and one of the most beloved and iconic synthesizers ever designed, it returns to the hands of synthesists of all kinds and serves as inspiration for the next generation of electronic musicians.

The three-oscillator, monophonic, analog synthesizer is securely housed in a locally sourced Appalachian cherry cabinet and hand-finished aluminum chassis. Sounding as vibrant and deep as ever, its legendary low-pass ladder filter, powerful oscillators, and rich saturating mixer retain the exact component placement and through-hole design of a 1970s-era Minimoog Model D.

While no changes have been made to the original sound engine or audio signal path, the 2022 Minimoog Model D includes a series of popular functional modifications that expand this legendary instrument's sonic capabilities. These modifications include a dedicated analog LFO with triangle and square waveshapes, a premium Fatar keybed with velocity and after pressure available via top panel CV jacks with onboard trimpots, MIDI integration, and a mixer feedback modification which allows the Minimoog Model D to overdrive and scream with the turn of a knob. And, for the first time in its history, the Minimoog Model D now features a spring-loaded pitch wheel with center deadband, allowing for improved playability and wild performance flourishes. This newest edition also includes updates to the MIDI functionality, allowing for improved modern studio integration.

SPECS
NUMBER OF KEYS
44
KEYBOARD RANGE
F0 to C4
KEYBOARD ACTION
Synthesizer (Spring)
NOTE PRIORITY
(Low, High, Last): User Selectable
SOUND SOURCES
3x Oscillators, Noise Generator and External Audio Input
OSCILLATOR FREQUENCY RANGE
0.1 to 20 kHz (In Six Overlapping Ranges)
OSCILLATOR STABILITY
(short term) > 0.25 %
OSCILLATOR WAVEFORMS
Triangle, Triangle-Sawtooth (Oscillator-1, Oscillator-2), Reverse Sawtooth (Oscillator-3), Sawtooth, Rectangle, Wide Pulse and Narrow Pulse.

Notes: ***B-STOCK: Box opened, product in perfect working order***


The Minitaur is a compact analog bass synthesizer that features a classic one knob per function layout. It is the first instrument in the Taurus family that does not have foot pedals.

The Minitaur has all the growl, snarl and body associated with the Taurus family of bass synthesizers. Moog are really excited to be able to offer this in such a compact package that is both immediately playable as an extremely versatile analog synth and also integrates seamlessly into the world of MIDI and USB control environments, says Cyril Lance, Chief Engineer of Moog Music.

The Taurus Bass Pedals enjoy a nearly 40-year history and have made a seismic impact in the music world since their introduction in the mid-Seventies. The Taurus opened up so many possibilities for me, it also opened up a whole way of looking at what I do, says Geddy Lee, of the multi-platinum band Rush.

In 2009, Moog Music released the Taurus 3 Bass Pedals, a modern reinterpretation of the classic Taurus Bass Pedals. The Taurus 3 is currently used by artists such as The Black Keys, Animal Collective, Jean Michel Jarre, Yes, Weezer, Rush and The Dave Matthews Band.

Since the inception of Moog Music, Bob Moog tested his ideas, instruments and sounds on musicians as a key part of the product development process. In keeping with this tradition, Minitaur has been presented to a broad array of producers, artists and songwriters including Geddy Lee of Rush, techno legend Derrick May, Flying Lotus, Moby, the renowned record producer Nick Raskulinecz as a part of the final product development process. The enthusiastic response from these artists marks the beginning of the next generation in the Taurus Bass Synthesizer line.

In keeping with this tradition, Minitaur has been presented to a broad array of producers, artists and songwriters including Geddy Lee of Rush, techno legend Derrick May, Flying Lotus, Moby, Holy F*ck and renowned record producer Nick Raskulinecz as a part of the final product development process. The enthusiastic response from these artists marks the beginning of the next generation in the Taurus Bass Synthesizer line.

Notes: The Minitaurr is an inconspicuously compact, subharmonic bass machine designed to effortlessly integrate into any performance and computer-based music solution. Just as its progenitors, the Minitaur effortlessly does one thing above all others... wall splitting analog BASS.

For over 40 years, the Moog Taurus has been the secret weapon of artists and producers around the globe for generating earth-shaking bass.

The Minitaur is the newest addition to the Taurus family of Analog Bass Synthesizers. It is an inconspicuously compact, subharmonic bass machine designed to integrate seamlessly into any performance or computer-based music workflow . Just as its progenitors, the Minitaur effortlessly does one thing above all others... wall splitting analog BASS.

The solid steel enclosure of the Minitaur is deceptively simple - offering immediate access to critical sound design and performance controls only. This makes Minitaur extremely fast and easy to use--but just under the surface lies a vast expanse of dynamic and inspirational power that is instantly accessible from almost any laptop or MIDI controller.

The free Minitaur Editor software truly unlocks Minitaur's power and flexibility by making DAW integration and control completely seamless on both Mac and Windows machines. Load and save up to 128 presets onto your Minitaur, select from 6 different modulation waveshapes , engage Hard Sync, access full ADSR envelopes, MIDI sync the LFO, reset oscillator waveform cycles, polychain with other Moog synthesizers and more. Every feature can be manipulated, automated and recalled instantly.

Minitaur v2.2
The new Minitaur v2.2 update expands this powerful analog bass synthesizer with a host of new performance elements and user requested features, including front-panel access to new LFO wave-shapes, oscillator hard-sync and much more--and Minitaur's new Librarian/Editor Software makes DAW integration seamless between your synthesizer and Mac or Windows machine.

SPECS
SOUND ENGINE
Analog
PRESETS
128 Presets
POLYPHONY
Monophonic (Can be poly-chained)
EXTERNAL CONTROLLER RESPONSE
Keyboard, Pitch Bend, Mod Wheel, After Pressure and Velocity
SOUND SOURCES
2 Waveshape Oscillators with Square and Saw waveshapes

Notes: Moog's Minitaur Rackmount Kit is pretty much essential if you're gigging with your Minitaur. In the studio, you can tidy up and enhance your productivity by getting your synth off the desktop and into your rack. The Minitaur Rackmount Kit gives you the options of positioning your Minitaur either flat or angled, so your ergonomics will always be ideal. When you're playing out, the Minitaur Rackmount Kit lets you easily mount your Minitaur in a rack case, affording it protection from the rigors of the road.

Notes: Constructed of ash with a wood-burned Moog icon on the left panel; the Minitaur Wood Kit houses your new Moog synth in style. It comes with easy-to-install front and side panels.

The dual end-pieces are easy to install and make your Minitaur feel right at home next to your Voyager, Taurus 3, Moogerfoogers and more.

Notes: Replacement UK power supply for all moogerfooger analog effects.

Notes: The Mother-32 gig bag is a custom-sewn soft case designed specifically to protect your Mother-32 Semi-Modular analog synthesizer from the collisions of day to day travel. It features a snug, fully cushioned internal storage compartment for one Mother-32, an adjustable divider for nesting a power adapter, a large exterior pocket for patch cable storage and a padded handle for portability.

Notes: Contains 5 high quality Moog modular patch cables for use with Mother-32 and all 3.5mm equipped instruments.

Notes: Contains 5 high quality Moog modular patch cables for use with Mother-32 and all 3.5mm equipped instruments.

Notes: The Mother-32 is a distinctive analog instrument that brings raw sound, step-sequencing and extensive interconnectivity to any electronic or modular ecosystem. This expansive live performance and production synthesizer is designed to provide experimental musicians and synthesists with a diverse array of creative tools to inspire new ideas, unique sound and endless sonic exploration.

Drive synchronized sound with Mother 32's powerful step sequencer while utilizing its modular patchbay and assignable output to spawn a living, breathing organism with dynamic and modifiable sound processing. Patch multiple control and sound sources into Mother-32's voltage controlled mixers and truly unlock the vast potential of this powerful instrument, or pull all of the patch cables, plug in a MIDI cable and simply drive your Mother-32 from any MIDI-equipped device.

The Mother-32 is secured in an extruded aluminum enclosure with wood sides, but can also easily be relocated to almost any Eurorack enclosure.

During the prototype phase, Moog worked with 3 unique synthesists: Erika (Interdimensional Transmissions), Max Ravitz (Ghostly International), and Bana Haffar to produce a video that explores Mother-32's vast capabilities. Through performance and sound design, each artist displays the extensive vocabulary found within Mother-32. All patches were performed live, with no overdubs.

Specs

Sound Engine: Analogue
Polyphony: Monophonic
Keypad: 13 Note
Step sequencer: 32-Step with 64 Sequence Locations, Keyboard and Step Edit Modes
Sequencer panel controls: Tempo, Swing, Run/Stop, Hold, and Reset
Sound sources: 1 Oscillator With Pulse and Saw Waveforms, 1 White Noise Generator, 1 External Audio Input
Oscillator range: 8Hz-8KHz (16KHz max with LFO/CV)

Notes: Mount 3 Mother-32 synthesizers together vertically for maximum modularity and synthesis capabilities. Also accommodates 60HP Moog Eurorack cases.

*Mother-32 units not included*

Notes: Protect your investment when you're on the road. The EW Pro Molded case is designed to meet ATA specifications. It is custom fitted to the EW Pro. It has heavy duty casters and an internal compartment for storing cables.

Notes: The Moog Rack Mount Kit is designed for Moogerfooger Effects, a standard 19" equipment rack fits 3 pedals, also suitable for the CP-251 control processor.

The kit is 6 units high, and can hold up to 3 Moogerfooger units or up to 4 CP-251 size units. It comes with instructions for assembly and all the hardware necessary for installation.

Notes: The VX-351 Rack mount kit can be used to mount the following combinations: 1 VX-351 and 1 CP-251, 1 VX-351, 1 CP-251, 2 VX-351, 2 CP-251.

It is 3-rack spaces high, and is designed to fit any standard 19" equipment rack. It comes with all the necessary hardware and instructions for assembly and installation.