Notes: A 45 rpm adapter (also 45 rpm record insert, or 45 rpm spindle adapter) is a small plastic or metal insert that goes in the middle of a 45-rpm record so it will play on a turntable. The adapter could be a small solid circle that fits onto the bottom of the spindle (meaning only one 45 could be played at a time) or a larger adapter that fits over the entire spindle, permitting a stack of 45s to be played.
Notes: A stylus that meets the high demands of DJs.
The special heavy-duty suspension of the headshell and the spherical diamond guarantee reliable tracking. An integrated weight ring creates heaviness thus allowing high bearing strength.
The design allows easy installation on all drives with SME-Disco Connection: Tighten the plug in screw cap on the tone arm, adjust contact pressure and even the professional record no bounds are set.
Leather turntable mat for isolation of vinyl from surroundings
Notes: During the past 20 years the quality of record players and vinyl records have improved dramatically. Acoustic feedback is one of the big problems when playing records. The cause is the sound that has just been produced by the speakers which comes back to the record player and cause it to vibrate. The problems is that there is a very slight time difference between the reproduced sound and the sound that is fed back onto the record player. This results in a big loss of detail and clarity and makes the sound "muddy". So every effort has to be done to isolate the record player from its surroundings as well as to isolate the record from the record player.
In order to reduce acoustic feedback from the surroundings back to the record and the cartridge a lot of effort has gone into developing turntable mats that make the reproduced sound crystal clear with great separation and detail. This has been done by experimenting with various materials which absorb unwanted vibrations which were not present in the original recording. Now many people are trying to combine these different materials as a sandwich at the same time in order to reach better results. Now Tonar offers you this opportunity to experiment yourself but at modest pricing.
In order to enhance the better contact between the record and the mat, the center part - with the dimensions of the label have been recessed to accommodate the thicker label part.
Velvet record cleaning brush for removing dust and other particles from the grooves of a vinyl record
Notes: This brush is manufactured is made of ultra-fine pile very high quality velvet, specially selected for this purpose. The velvet reaches deep into the record grooves and removes even the finest dust particles. The brush itself can be easily cleaned using the two foam rubber scrapers located on both sides of the plastic brush base.
Crystal turntable mat for ultra clear sound and excellent separation
Notes: Crystal turntable mat is lighter and harder than aluminum and coated with a special technique. It helps produce a crystal clear sound with excellent separation.
Notes: A turntable on a slope is not good, it can affect the performance of your tonearm, making it prone to jumping and skipping. This simple but effective level from the experts at Tonar will tell you if your turntables are mounted on a flat surface for optimal performance.
Notes: Tonar micro fibre cloth is a material well known for it's properties to remove grease and fat from any surface. Tonar uses this material to clean finger prints and grease from records as well as CD's and DVD's.
It also will remove the dust from records and replace the former cotton type record cloths.
Tonar Micro-Mu vinyl cleaning brush with hair less than 50 Micron diameter
Notes: The Micro-Mu is a wet record cleaning brush that features special ultra fine bristles and a solid plastic handle. The bristles are under 50 microns thick, so incredibly thin making them reach further into the grooves than most, for a really deep clean. They bristles are very soft and perfect for use when wet, making this brush ideal for any fluid based vacuum cleaning regime you use on your LPs. The sculptured solid handle makes using it a pleasure too. Please note that some light shedding of bristles can occur especially when new, but as it's intended to be used with a vacuum record cleaner this isn't likely to ever be an issue.
Notes: Tonar Misty Record-Clamp - 'foggy' transparent. The Tonar Misty plate clamp is the perfect alternative if a "plate puck" is too heavy for your turntable.
Static electricity and dust removal arm tool, with carbon fibre brush and sliding weight for force adjustment
Notes: The Nostatic Arm is the modern version of the formerly well known "Dust Bug" by Cecil Watts. The Nostatic arm incorporates a carbon fiber brush that removes the static electricity from the record during playback, and at the same time picks up the loose dust before the stylus reaches that part of the record. The Nostatic arm has an earth wire which is connected to the earth of the record player or the amplifier.
The height can be easily adjusted to fit most record players. It also has a sliding weight in order to adjust the "dusting force" of the brush. Finally the base of the brush has sticky tape so if preferred it can be stuck to the surface of the record player for easy use.
Carbon fibre record brush for removal of dust & other particles from vinyl grooves
Notes: This brush contains more than one million very fine carbon fibre bristles. The cross section of these bristles is so small that they can easily get into all the nooks and crannies of the record groove. Because the carbon fiber conducts electricity it takes away all the static to earth via the metal handle and the person holding the brush. Then the dust lies loose in the groove so the next set of bristles can easily pick them up and remove them from the record groove.
No-static turntable mat made of felt & carbon fibres for isolation of the record from surroundings
Notes: The Nostatic mat II improved, is one of the bestselling Tonar record turntable accessories. The mat is made of a combination of felt mixed with carbon fibers. The felt cushions the record and damps the vibrations caused by acoustic feedback to the record players from the speakers and other vibrations coming from outside. The mat is 2 mm thick. The carbon fibers collect the static charge from the record and conduct it back to earth due to the contact with the center spindle as well as with the platter.
Notes: The Tonar Plastigoat is a high quality record brush with two rows of ultra-soft real natural goat hair. A perfect brush to use for wet cleaning of your vinyl records. The naturally anti-static bristles prevent static build-up and the steady handle provides perfect grip while cleaning your record collection.
Replacement plastipap, antistatic record inner sleeves - pack of 25
Notes: Tonar plastipap antistatic record inner sleeves (25 pieces) are made of super antistatic plastic paper reinforcement inside the plastic. This combination gives you both a dust free anti-static protection for your valuable records as well as additional strenght to avoid folding and creasing of the sleeves when sliding the sleeve in and out of the record album. This model 5311 plastipap is suitable for LP records only (12 inch-30 cm). Tonar plastipap inner sleeves are also available for 45, and 78 RPM records.
Tonar supplies record inner sleeves for 33, 45 and 78 RPM records as well as outer sleeves to protect your valuable album sleeves.
High quality cork turntable mat for better isolation of the record from surroundings
Notes: During the past 20 years the quality of record players and vinyl records have improved dramatically. Acoustic feedback is one of the big problems when playing records. The cause is the sound that has just been produced by the speakers which comes back to the record player and cause it to vibrate. The problems is that there is a very slight time difference between the reproduced sound and the sound that is fed back onto the record player. This results in a big loss of detail and clarity and makes the sound "muddy". So every effort has to be done to isolate the record player from its surroundings as well as to isolate the record from the record player.
In order to reduce acoustic feedback from the surroundings back to the record and the cartridge a lot of effort has gone into developing turntable mats that make the reproduced sound crystal clear with great separation and detail. This has been done by experimenting with various materials which absorb unwanted vibrations which were not present in the original recording. Now many people are trying to combine these different materials as a sandwich at the same time in order to reach better results. Now Tonar offers you this opportunity to experiment yourself but at modest pricing.
In order to enhance the better contact between the record and the mat, the center part - with the dimensions of the label have been recessed to accommodate the thicker label part.
White perspex turntable mat for isolation of the record from surroundings
Notes: During the past 20 years the quality of record players and vinyl records have improved dramatically. Acoustic feedback is one of the big problems when playing records. The cause is the sound that has just been produced by the speakers which comes back to the record player and cause it to vibrate. The problems is that there is a very slight time difference between the reproduced sound and the sound that is fed back onto the record player. This results in a big loss of detail and clarity and makes the sound "muddy". So every effort has to be done to isolate the record player from its surroundings as well as to isolate the record from the record player.
In order to reduce acoustic feedback from the surroundings back to the record and the cartridge a lot of effort has gone into developing turntable mats that make the reproduced sound crystal clear with great separation and detail. This has been done by experimenting with various materials which absorb unwanted vibrations which were not present in the original recording. Now many people are trying to combine these different materials as a sandwich at the same time in order to reach better results. Now Tonar offers you this opportunity to experiment yourself but at modest pricing.
In order to enhance the better contact between the record and the mat, the center part - with the dimensions of the label have been recessed to accommodate the thicker label part.
1 litre bottle of vinyl cleaning fluid for record cleaning machines
Notes: This record cleaning fluid made for use in all types of record cleaning machines currently on the market is only suitable for vinyl records (Important do not use with old 78 RPM shellac records as the liquid may do irreparable damage). Now what is so special about the QS-TONAR vinyl cleaner compared to similar looking competing products on the market?
QS-TONAR liquid has an extremely low surface tension
- Only because of this reason QS-TONAR liquid can penetrate right to the bottom of the grove where other fluids seem to penetrate, but actually just stay lying on top of the record surface.
- Only QS-TONAR liquid cleaner soaks the dust, dirt, air pollution as well as residue from previously used cleaners, fatty deposits remaining from the original record pressing process, even fungi and molds caused by records having been stored in humid conditions etc.
- QS-TONAR liquid detaches all of the mentioned dirt from the walls of the grove after which the brushes in the machine can easily wipe the groove completely clean. The amount of residue remaining in the grove is negligible - this contrary to almost all other liquids currently on the market.
- QS-TONAR liquid is much more volatile than other liquids reducing the drying time of the record to a minimum.
- QS-TONAR liquid has another property causing the dirt to remain floating in the liquid rather than settling back at the bottom of the grove.
Notes: This liquid is the exact same liquid as the Tonar QS Vinyl cleaner, but now supplied in a spray can that is convenient to use for small cleaning jobs together with the TonarWetgoat brush made of pure goats hair.
Replacement diamond stylus for the Shure M44-7 Cartridge
Notes: The Tonar N44-7 Stylus is a replacement white stylus for the Shure M44-7 Cartridge. This stylus has been manufactured to the same standard as the original. Engineered for scratch DJ's and turntablists, the N44-7 is designed not to skip under even the most demanding circumstances. The Tonar N447 White features a diamond tip stylus making them perfect for DJ'ing and general vinyl play.
Key features:
White replacement stylus for Shure M44-7
Manufactured to same standard as the original
Engineered for scratch DJ's and turntablists
Diamond tip stylus perfect for DJ'ing and general vinyl play
Records stylus playing time to determine when to replace your stylus
Notes: A turntable without a StylusTimer is like a car without a Speedo!
Turntable phono cartridges have a stylus that should be replaced after every 1000 hours of use, sometimes even sooner, depending on the cartridge. A worn stylus degrades sound quality and can damage your valuable record collection. Unfortunately, most turntable owners have no idea how much time is actually on their stylus, especially as the months and years go by. Now you can track stylus usage easily and precisely with StylusTimer, a unique chronograph designed for use with turntables.
Tonar Stylus Timer
Protect your records
Track Listening Time
Determine when to replace your Stylus
Know precisely how many hours are on your stylus or cartridge
Track break-in hours and changes in sound quality over time
Protect your record collection from damage by a worn stylus
Know when it is time to replace your stylus or cartridge
Maximise your investment, especually with high-end cartridges
Have fun watching the hours climb, tracking your listening habits
Rolling record cleaner with "tacky" rubber surface for removing dust and other dirt from the surface of records
Notes: The TonarTacky Cleaner uses a special grade of rubber elastomer that never loses its original surface tackiness. Just rolling it lightly over the record surface in straight lines is enough to remove dust and dirt trapped in the grooves. When the roller has become dirty it is easy to clean. Just remove from the holder and wash with a little bit of hand soap under the tap with water.
After drying the roller with a lint-free paper cloth it regains its original tackiness.
Notes: The newly developed Tonar Top Tip stylus cleaning Liquid with stylus lubricating additive is very easy and simple to use. It is a powerful cleaning solution that will detach all the dirt ad tough grime that your stylus collects from the record during play-back and result in a perfectly cleaned stylus surface.
The kit contains a bottle with the Top Tip cleaning and lubricating liquid. In the bottle top you will find an applicator brush that is used to wet the stylus brush. The kit also includes the Tonar clean tip carbon fibre stylus cleaning brush.
Instructions:
Unscrew the bottle top and apply one or two drops of liquid onto the Tonar cleantip brush. To clean the stylus tip brush the tip a few times with the brush. Careful! Always clean the tip from the back of the cartridge to the front of the cartridge only. Never brush back and forth as shown on the diagram. You do not have to remove the stylus the cartridge for cleaning.
Caution:
The fluid contains a low percentage of Iso-Propyl Alcohol. Keep out of reach of children.
Notes: Getting the most out of any turntable requires an accurate vertical tracking force setting-and yes, kids, you can easily hear changes as slight as a tenth of a gram. it is small, has a backlit display, is incredibly easy to use.
Accurate and simple to use - that's the essence of a great stylus force gauge, and that's what you get with this. We all know, or certainly we all should know, that dialling in your correct tracking force is absolutely essential for optimal record playback.
If you miss on the heavy side, your sound becomes thick and sluggish. Miss on the light side, and your cartridge is more likely to mis-track and the sound will be light and could damage your valuable records
So, stop messing with those mechanical stylus balances that aren't even accurate. This is one case where digital makes more sense when it comes to fine-tuning your analogue.
Tonar concentrate fluid for Wash and Dry - makes 1 litre of cleaning fluid when added to distilled water.
Notes: The special formula of the Tonar record cleaning fluid concentrate brings dirt to the surface for easy removal. This 50 ml bottle concentrate makes 1 litre of cleaning fluid when added to distilled water.
Can be perfectly used in all record cleaning machines , including the Tonar Wash & Dry Vinyl Washing Machine or the Tonar Knosti Disco-Antistat record washing machines.
We use cookies to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners who may combine it with other information that you've provided to them or that they've collected from your use of their services.