Resultados de la búsqueda

Notes: Beyond what you expect from an audio interface.

The Revolution 6×6 is an all-purpose studio dynamo that can serve as a master clock, a standalone DAC and ADC, a master clock, and a 6-in, 6-out class-compliant USB interface with audio quality worthy of the Revolution name. Enjoy world-class clocking and low-noise conversion while tracking to the included Studio One Artist. Use the USB OTG connection to sample audio from your phone or tablet... or send audio from your laptop to your mobile device and stream your performance live online. Sync your other hardware devices via Black Lion's proprietary Macro-MMC clocking - all while treating your music with the highest audio quality imaginable.

Audio interfaces don't sound better than this.

Revolution 6×6 is a class-compliant, bus-powered USB audio interface with industry-leading signal quality based on Black Lion's years of experience in audio interface modification. Record anything thanks to balanced XLR, line-level, and instrument-level input options. Connect pro studio monitors or use its two plenty-loud, crystal-clear, mono-summable headphone outputs with direct monitoring mix control. Integrate external gear via the S/PDIF connection and USB OTG.

Rarified tech found in Revolution 6×6 includes the Macro-MMC clock for maximum converter quality, yielding reduced jitter and enhanced harmonics for a glossy, airy top-end you won't hear in lesser interfaces. Proprietary PG-i filtering technology and highly-filtered power rails work with full-circuit power decoupling to further reduce noise contamination. And for the best possible capture and playback, Revolution 6×6 sports the most cutting edge, high-end ICs and Vishay, Nichicon, and Wima capacitors throughout with all internal gain-staging optimized for the best possible signal-to-noise ratio. Last but not least, all analogue I/O is fully decoupled and balanced - right to the very core of the converter!

Standalone mode for DAC and ADC use.

Not every studio task requires a computer. The Revolution 6×6's DAC, word clock, and D/A conversion features can all be used without a computer; just press and hold the "Standalone" button. Hook up your media player via S/PDIF and enjoy good old-fashioned hi-fi listening with good new-fashioned hi-fi conversion, or add two additional output channels from another audio interface or digital mixer.

Many MPCs, synths, and guitar processors also have S/PDIF, which will often deliver better sound than using their onboard converters.

For recording, connect any guitar processor with a S/PDIF output and enjoy high-quality D/A conversion of your custom guitar tones. You can even connect Revolution 6×6 to your computer over USB for hi-fi listening by bypassing the questionable converters in your old laptop. Use S/PDIF to add two channels to an audio interface or digital mixer, all synchronized by the same master clock over BNC.

As a standalone A/D converter, you'll add two superior channels of Black Lion-converted audio over S/PDIF to your existing recording setup - and you won't have to buy an ADAT expander.

Get mobile with USB On-The-Go.

USB On-the-Go connectivity gives the Revolution 6×6 2-in, 2-out connectivity with Android and Apple mobile devices. It's perfect for livestreamers and mobile musicians who record to or stream from phones and tablets. Connect two USB devices to the Revolution 6×6 simultaneously and send audio to and from either. Sample from your phone to your laptop, or livestream an iPad performance from your phone... the possibilities are endless!

Shocking clocking.

The Macro-MMC (Master Music Clock) in Revolution 6×6 was developed from Black Lion's experience creating dedicated word clocks, as well as modifying many embedded clocks found in other recording interfaces. Macro-MMC ensures the best possible performance from its converters, but also allows you to connect external gear via the BNC connections for maximum sync and ultra-low jitter - meaning any devices synced via Macro-MMC are communicating as accurately as possible to minimize the phase distortions that can muddy your high-end and dull your transients.

If you've already invested in a clock you like, that's fine - the Revolution 6×6 graciously accepts clock in.

All the software tools you need, included.

The Revolution Software Suite covers all of your software needs so you can start creating from day one. You'll record straight into the award-winning Studio One Artist, of course... and we've also included select plugins from Izotope, Psychic Modulation, Brainworx, and Lindell:

PreSonus Studio One Artist: Recording and music production DAW

Izotope Elements Suite: Nectar, Neutron, Ozone and RX for tone-shaping, mastering, and repair

Platform: macOS (class compliant), Windows 10+ (driver)
Input Impedance: 2KO mic, 15KO line
Gain Range: 59dB
Frequency Response: 20Hz - 20KHz +/- 0.25dB
THD + N: 0.01% (Min Gain)
Dynamic Range: 112dB (A-Weighted)
Crosstalk: < 100dB
Output Impedance: 47O (balanced)
Dimensions: 330 x 305 x 152mm, 2.72kg

Notes: Discrete VCOs with three Subs, SYNC, Wavefolder, discrete VCA and VCF, Dual analog LFO (one also usable as VCO) into audio rate with Keytracking, huge Mixer section, Ring mod, Glide and Patchfield.

Power consumption: TBA

Rackspace: 36HP

Notes: Acoustic Electronic "synthesiser" and external audio effect processor with CV control. Little sister of the Resonant Garden.

The Nano Garden is an acoustic-electronic hybrid designed to create anything from beats and oddities to dense soundscapes. From its inception in 2006, the original garden has gone through many changes and refinements: micro garden, luminist garden and illuminist garden and finally this latest and likely final version of what is essentially an expanded micro garden.

The Nano Garden essentially utilizes a single Alter circuit with 7 effects selected specifically for this instrument. Each is also equipped with a mic pre-amp, and 2 garden (stringed) panels for generating acoustics. By plucking, rubbing, tapping or even bowing, those micro-acoustic sounds become amplified and effected by the Alter in any number of ways. In essence, the garden is a large microphone designed to pick up vibrations. Aside from the internal mic, the nano can be used to process external signals with any of the internal effects as well.

Effects

There is a single Alter in the Nano which has seven different DSP effects, selected by touching the copper hexagon. The effect list is different than either Alter 1 or 2 - these are selected specifically for the Nano (this selection is subject to change):

1 - long delay (capable of near infinite feedback looping)
2 - notated granular delay
3 - plate reverb
4 - choral reverb
5 - palindrome reverse delay - backward/forward repeat
6 - pitch delay
7 - time stretch/glitch

Control

- Control for the gain of the mic pre-amp or any incoming audio.
- Controls for Mix, X, Y and Sift as well as clock.
- All effects have a variation of a filter which may change effect to effect.
- X and Y control various rates.
- Clock control adjusts the rate which controls the DSP which can drastically change the effect. In doing so it does slightly lower the quality of the output signal but the results are fantastic. This clock is not for synchronization.
- Mix, X, Y and Sift all have CV control inputs.
- Each control level or cv input is visualized on the control panel.


Acoustics

Each sprout panel is equipped with a contact mic. A contact mic is designed to pick up vibration. The mic pre-amp is specifically designed to deal with the frequencies of the contact mic by boosting certain frequencies and dulling others in order to optimize the sound quality. The mic pre-amp has a gain control so the level can be adjusted according to how you intend to play.

Design

The box is constructed with Sapele African hardwood and a white birch bottom panel. It features anodized black aluminium rails for mounting the faceplates. Each sprout of strings is bolted in from the back and held in place with a backing panel under the main board.

Each box has unique wood grain patterns. The wood grain shown in the images will appear different for each instrument Folktek ship.

Included

- Power Supply: 12V positive tip AC Adapter (included) - US - 100-240V ~ 50/60Hz 0.6A
- Four (4) black 24" (60cm) 3.5mm TS mono patch cables

Notes: Not your average sequencer

A 16 track algorithmic sequencer at the center of your studio. The T-1 offers a generative workflow with focus on immediacy and playful exploration. Whether on stage or in the studio, the T-1 will inspire you with fresh ideas and help you push the boundaries of your music. In short, this is a fundamental rethinking of the sequencer as a modern, fun and inspiring instrument

This machine speaks music

Enter a creative dialogue with T-1, and let its musical algorithms spark your creative process, or bring it on stage to perform your musical ideas live and spice them up with variations created on-the-fly

It's your instrument

The T-1 can be customized to suit your music. In fact, it is many instruments in one: Each of the T-1's 16 tracks can be set up in one of three modes.

Note: Compose rhythms and melodies from scratch with creative musical algorithms, and tweak them to your desire with detailed step editing.

CC: Take absolute control over sound design with 16 CC knobs and add automation via random modulation and step editing

FX: Create real-time midi fx to expand and transform your musical ideas. Connect a midi keyboard for hands on live performance

Connect to everything

The signal flow of any modern studio is a complex web of analog, digital and wireless signals and keeping your instruments connected and in sync can be a drain for your creativity. The T-1 solves this by communicating via MIDI, USB, analog CV and gates, Ableton Link and Wi-Fi connections with all of your gear.

Musical structure in a knob

Sculpt the timing, tonality and overall structure of your music in the same intuitive way you would a parameter on a synthesizer: By the twist of a knob. The T-1 lets you dial in any rhythm in a manner of seconds with euclidean rhythms.

Want to surprise your audience and even yourself? Add a bit of random modulation or change the probability of a step being played or not. Try the T-1 style looping random modulator

Tangible visuals

What you see is what you get: at every touch of a knob or push of a button, 16 RGB buttons show you the state of the instrument while offering up a quick way to jump to a new setting in real-time

Performing is composing

The T-1 is an instrument designed to be played in the here and now. Whether you are working in a studio or on stage, the path between musical inspiration and performance has never been shorter.

Make relative parameter changes on one or multiple tracks simultaneously, save the changes or return to the starting point. With the T-1, your music making process is a constantly evolving flow

Technical specifications

Sequencer
Euclidean rhythm generator (w. step editing)
Advanced note repeater / arpeggiator
Melody generator
7 musical scales + 1 user scale per track
Harmonic pitch control
Random modulation on every parameter

Tracks
16 tracks per pattern
16 MIDI channels
Polyphony on every track

Storage
Auto-save
16 patterns per bank
16 banks

User interface
18 endless rotary encoders with push
23 RGB backlit silicone keypads

Physical
Matte black aluminium casing
Dimensions: L:304, W:114, H:39mm ?(11.9", 4.5", 1.5")
Weight: 815g (1.8 lbs)

In the box
1 x T-1
1 x USB cable
1 x MIDI adapter (type A)

Connectivity
USB C (midi/power)
MIDI in / out / thru (TRS type A)
CV & gate i/o
Ableton Link (WiFi)

Notes: All the features of the Modwave MkII in a compact 4U 19" desktop/rackmount package. Modwave builds on the legacy of Korg's DW-8000 and transforms it into a modern monster synth, featuring incredibly deep wavetable oscillators, gorgeous filters, wildly flexible modulation, unmatched polyphony, comprehensive pattern sequencing, and immediately satisfying hands-on control to deliver unique, powerful, and easily customizable sounds and phrases.

Like Modwave MkII, the Modwave Module provides an astonishing 60 stereo voices of polyphony - almost double the original Modwave's 32, and an unprecedented number for a wavetable synth at any price. The new 4U rack-mount enclosure has the same controls as the keyboard models, yet is easily transportable and fits neatly into any studio or desktop production system.

Responding to user requests, Korg have updated all LFOs with options for free running, delayed start, and retriggering. Korg have also added a pre/post switch for reverb sends, new modulation sources, and more.

The Modwave Module is fully compatible with the sounds and samples of the original Modwave, Modwave Mk II, and Modwave Native software, as well as many third-party libraries. MIDI 2.0 Property Exchange and Polyphonic Aftertouch Support

With the latest software updates, all models of Modwave, hardware and software, now support MIDI 2.0 Property Exchange and easy access to Polyphonic Aftertouch - making them excellent companions to the Korg Keystage controller.

Rack-Mount and Desktop

The Modwave Module is cleverly designed for both desktop and rack-mount use. The panel is redesigned to fit into a standard 19" width, and the rear jack panel is recessed to allow easy access to cables even with gear mounted directly above. With desktop setups, brackets offer a choice of panel angles: flatter for performing standing up, or more upright for working while seated in your studio.

Specifications

Maximum Polyphony: 60 stereo voices
Dimensions (W x D x H): 483 x 172 x 107 mm / 19.02 x 6.77 x 4.21 inch
Weight: 1.7 kg / 3.75 lbs.
Accessories: AC adapter
Sound generating system: modwave synthesis engine

Modulation

Controllers: Mod Wheel, Pitch Wheel, Kaoss Physics, 4x Mod Knobs

Other Sources

4x Envelopes, 5x LFOs, 2x Mod Processors, 2x Key Track, Seq Lanes A-D, Step Pulse, Tempo, Program/Performance Note Count, Program/Performance Voice Count, Poly Legato, Velocity, Exponential Velocity, Release Velocity, Gate, Gate+Damper, Note-On Trigger, Note-On Trigger+Damper, Note Number, Aftertouch and Poly Aftertouch (external MIDI only), MIDI CCs +/-, MIDI CCs +

Destinations: Most parameters can be modulated, including parameters of individual Motion Sequence Steps: Depending on Motion Sequence length, there can be more than 1,000 potential modulation targets per Program.

Effects

Pre FX: Decimator, Graphic EQ, Guitar Amp, Modern Compressor, Parametric EQ, Red Compressor, Ring Modulator, Tremolo, Wave Shaper

Mod FX: Black Chorus/Flanger, Black Phase, CX-3 Vibrato Chorus, EP Chorus, Harmonic Chorus, Modern Chorus, Modern Phaser, Orange Phase, Polysix Ensemble, Small Phase, Talking Modulator, Vintage Chorus, Vintage Flanger, Vintage/Custom Wah, Vox Wah

Delay: L/C/R Delay, Multiband Mod Delay, Reverse Delay, Stereo/Cross Delay, Tape Echo

Master Reverb: Early Reflections, Overb

Master EQ: 4-band parametric EQ

General

Inputs/outputs: Headphone (6.3 mm stereo phone jack), OUTPUT L/MONO and R (impedance-balanced 6.3mm TRS phone jacks), DAMPER (6.3 mm phone jack, half-damper not supported), MIDI IN and OUT connectors, USB B port
Power supply: AC adapter (DC12V, 2500mA)
Power consumption: 5 W

Notes: A new modular model that revolutionizes the music production environment.

Opsix Module is a digital synth like no other. The Opsix Operator Mixer simplified FM synthesis for the first time, making it not just comprehensible but also controllable. With the addition of extra synthesis capabilities and programming, it offered a more efficient workflow and an even richer sound.

Now, Korg has created a new form of Opsix, the module. This model supports MIDI 2.0 property exchange and poly aftertouch, and is an excellent companion to Keystage. It's also fully compatible with the sounds of the original Opsix, Opsix mk II, Opsix SE, and Opsix native software, as well as numerous excellent third-party libraries, keeping the updated sounds and software fresh. The new 19" rack-mountable enclosure has the same controls as the keyed models, yet is easily transportable and fits neatly into any studio or desktop production system.

MIDI 2.0 Property Exchange and Polyphonic Aftertouch support

With the latest software updates, all models of Opsix, hardware and software, now support MIDI 2.0 Property Exchange. Hundreds of the original factory sounds have been updated to include Polyphonic Aftertouch modulation (Channel Aftertouch is supported as well). All of this makes the Opsix module an excellent companion to KORG's Keystage controller.

Rack-Mount and Desktop

The Opsix module is cleverly designed for both desktop and rack-mount use. The panel is redesigned to fit into a standard 19" width, and the rear jack panel is recessed to allow easy access to cables even with gear mounted directly above. With desktop setups, brackets offer a choice of panel angles: flatter for performing standing up, or more upright for working while seated in your studio.

Many musicians have requested a module version of the Opsix. Now that components are once again available after a long period of supply-chain disruption, KORG is pleased to make that request a reality.

Main Specifications
Maximum Polyphony: 80 voices
Dimensions (W x D x H): 482 x 172 x 104 mm / 19.02 x 6.77 x 4.09 inch
Weight: 1.7 kg / 3.75 lbs.
Accessories: AC adapter

Sound generating system: Altered FM sound generator
Structure: 6 operators, 1 filter, 3 EGs, 3 LFOs, 3 effects, step sequencer, arpeggiator
Algorithm: 40 presets + user algorithm (unique to each program)
Operator: 6 modes (FM, Ring Mod., Filter, Filter FM, Wave Folder, Effect)
Oscillator waveform: 23 waveforms (Sine, Sine 12bit, Sine 8bit, Triangle, Saw, Saw HD, Square, Square HD, Additive Saw3, Additive Sqr3, Additive Tri3, Additive 12345, Additive 1+2, Additive 1+3, Additive 1+4, Additive 1+5, Additive 1+6, Additive 1+7, Additive 1+8, Noise S/H, Noise White, Noise Pink, Noise Blue)
Filter: 11 types (LPF 12, LPF 24, LPF MS-20, LPF POLY6, HPF 12, HPF 24, HPF MS-20, BPF 6, BPF 12, BRF 6, BRF 12)
EG: ADSR
LFO: 23 waveforms (Triangle, Saw Down, Saw Up, Square, Sine, Sample&Hold, Guitar, Exp. Triangle, Exp. Saw Down, Exp. Saw Up, Step4 Triangle, Step6 Triangle, Step4 Saw Down, Step6 Saw Down, StepRnd:Time, StepRnd:Lvl&Time, StepRnd:Level, Random:Time, Random:Lvl&Time, Triangle + , Saw Down + , Saw Up + , Square +)
V.Patch: 12 routings
Effect: 30 types (Chorus, Unison Ensemble, Phaser, Phaser (BPM) , Auto Pan, Auto Pan (BPM), Flanger, Flanger (BPM) , Rotary Speaker, Auto Wah, Exciter, Enhancer, LFO Filter, 3-Band EQ, Distortion, Guitar Amp, Decimator, Grain Shifter, Master Limiter, Compressor, Delay, Delay (BPM) , Autopan Dly, Autopan Dly (BPM), Tape Echo, Tape Echo (BPM) , Early Reflection, Reverb, Shimmer Reverb, Spring Reverb)
Sequencer: Step Sequencer (up to 16 steps, up to 6 notes per step)
Motion Sequencer (up to 6 lanes)
Arpeggiator: 7 patterns (MANUAL, UP, DOWN, ALT1, ALT2, RANDOM, TRIGGER)
Number of programs: 500 (350 preset programs and 150 user programs as the factory-set default)
Favourite: 64 (16 Slots × 4 Banks)
Controllers: MODULATION wheel, PITCH wheel, RATIO OP 1-6 knobs, LEVEL OP 1-6 sliders, DATA ENTRY A-F knobs

Inputs/outputs:
Headphone (6.3 mm stereo phone jack)
OUTPUT L/MONO and R (impedance-balanced 6.3 mm TRS phone jacks)
DAMPER (6.3 mm phone jack, half-damper not supported)
MIDI IN and OUT connectors
USB B port

Notes: A new modular model that makes a big difference in the music production environment.

Introducing the Wavestate module - all of the features of the Wavestate mkII in a compact 19" desktop/rackmount package.

In 2020, the acclaimed Wavestate brought KORG's Wave Sequencing to the next level. Featuring the radically re-imagined Wave Sequencing 2.0, the Wavestate delivers astonishing, ever-changing sounds with extensive hands-on control. Far from a nostalgic reissue, the Wavestate was designed from the ground up for a new generation of musicians, producers, and composers, taking cues from sources as diverse as modular synths, groove boxes, and algorithmic composition.

120 voices of polyphony, updated LFOs, and more

Taking full advantage of both a new enclosure design and new processing hardware, the Wavestate module provides an impressive 120 stereo voices of polyphony. The new 4U rack-mount enclosure has the same controls as the keyboard models, yet is easily transportable and fits neatly into any studio or desktop production system.

Responding to user requests, we've also updated all LFOs with options for free running, delayed start, and retriggering, added new modulation sources, and more. A software update will also be available for the original Wavestate.

The Wavestate module is fully compatible with the sounds and samples of the original Wavestate, Wavestate mk II, Wavestate SE, and Wavestate native software, as well as many excellent third-party libraries.

MIDI 2.0 Property Exchange and Polyphonic Aftertouch support

With the latest software updates, all models of Wavestate, hardware and software, now support MIDI 2.0 Property Exchange. Hundreds of the original factory sounds have been updated to include Polyphonic Aftertouch modulation (Channel Aftertouch is supported as well). All of this makes the Wavestate module an excellent companion to KORG's Keystage controller.

Rack-Mount and Desktop

The Wavestate module is cleverly designed for both desktop and rack-mount use. The panel is redesigned to fit into a standard 19" width, and the rear jack panel is recessed to allow easy access to cables even with gear mounted directly above. With desktop setups, brackets offer a choice of panel angles: flatter for performing standing up, or more upright for working while seated in your studio.

Many musicians have requested a module version of the wavestate. Now that components are once again available after a long period of supply-chain disruption, KORG is pleased to make that request a reality.

Main Specifications

Maximum Polyphony: 120 stereo voices
Dimensions (W x D x H): 483 x 172 x 113 mm / 19.02 x 6.77 x 4.45 inch
Weight: 1.7 kg / 3.75 lbs.
Accessories: AC adapter
Sound generating system: Wave Sequencing 2.0
Maximum Polyphony: 96 stereo voices
Sounds: Ships with 261 Performances, 799 Programs, and 1,042 Wave Sequences
Storage for tens of thousands of user Performances Structure

Performance

4 Layers, Reverb, EQ; all edits are stored in the Performance, DAW-style (saving as separate Programs, Wave Sequences etc. is supported but not required)
Layer: Program, Arpeggiator, Key and Velocity Zones
Program: Wave Sequence, Filter, Amp, Pre FX, Mod FX, Delay
Filters: 2-pole LPF, 2-pole HPF, 2-pole BPF, 2-pole Band Reject, 4-pole LPF, 4-pole HPF, 4-pole BPF, 4-pole Band Reject, Multi Filter, MS-20 LPF, MS-20 HPF, Polysix
Modulation: Controllers
Mod Wheel, Pitch Wheel, Vector Joystick X/Y, 8x Program/Performance Mod Knobs
Other Sources: 3x Envelopes, Vector Envelope, 3x LFOs, 2x Mod Processors, 2x Key Track, Step Sequencer Lane, Step Pulse, Tempo, Program/Performance Note Count, Program/Performance Voice Count, Poly Legato, Velocity, Exponential Velocity, Release Velocity, Gate/Gate+Damper, Note-On Trigger/Note-On Trigger+Damper, Note Number, Aftertouch/Poly Aftertouch (external MIDI only), MIDI CCs +/-, MIDI CCs +
Destinations: Most parameters can be modulated, including parameters of individual Wave Sequence Steps. Depending on Wave Sequence length, there can be more than 1,000 potential modulation targets per Program.

Effects

Pre FX: Decimator, Graphic EQ, Guitar Amp, Modern Compressor, Parametric EQ, Red Compressor, Ring Modulator, Tremolo, Wave Shaper
Mod FX: Black Chorus/Flanger, Black Phase, CX-3 Vibrato Chorus, EP Chorus, Harmonic Chorus, Modern Chorus, Modern Phaser, Orange Phase, Polysix Ensemble, Small Phase, Talking Modulator, Vintage Chorus, Vintage Flanger, Vintage/Custom Wah, Vox Wah
Delay: L/C/R Delay, Multiband Mod Delay, Reverse Delay, Stereo/Cross Delay, Tape Echo
Reverb: Early Reflections, Overb
Performance EQ: 4-band parametric EQ

Inputs/outputs: Headphone (6.3 mm stereo phone jack), OUTPUT L/MONO and R (impedance-balanced 6.3 mm TRS phone jacks), DAMPER (6.3 mm phone jack), MIDI IN and OUT connectors, USB B port
Power supply: AC adapter (DC12V, 2500mA)
Power consumption: 5 W
Dimensions (W x D x H): 565 x 338 x 92 mm/22.24" x 13.31" x 3.62"
Weight: 2.9 kg/6.93 lb.

Included items

AC adapter
Accessories (sold separately)
DS-1H damper pedal, PS-1 pedal switch, PS-3 pedal switch

Notes: DLZ creator

Adaptive digital mixer for podcasting and streaming

Introducing the podcast mixer that adapts to you.

The DLZ creator adaptive digital mixer for podcasting and streaming enables you to get the results you want-faster than ever. Inspired in part by smartphone and DSLR cameras that make great results accessible to anyone, DLZ Creator transforms the on-screen controls to meet your creative style or skill level-without compromising processing power or sound quality.

Easy

A no-fuss user interface that offers the fastest path to recording your first podcast. For those who want to get great results without menu-diving.

Enhanced

Expanded control over your sound and mix. For those who want some customization without an overwhelming number of options.

Pro

Total control and fully customizable. For those who know what they want, and how to get it.

Built-in smarts

More than a digital mixer

DLZ creator is designed to help you become a better content producer.

Mix Agent is your personal audio assistant that guides you through setup and sound check, so in a few button presses you'll be recording. AutoMix manages levels for up to four mics so everyone can be heard-even when they speak at the same time-which is a big help when you're busy hosting a show with multiple guests or hosts.

Using Mix Minus with your Bluetoothr-connected smartphone lets you add a caller into the mix with no audible echo when they speak.

The ins and outs of producing

A professional studio mixer for your desktop

DLZ Creator harnesses decades of Mackie expertise, making every detail count for your productions. From Onyx80 preamps that make even low-output mics sound both loud and pristine, to customized headphone mixes for each of your guests, DLZ Creator gives you the benefits of a professional studio mixer without the steep learning curve.

Ready for what's next

A portable and versatile podcasting interface

As a content creator, you know that flexibility is key. No matter how you like to create, the DLZ podcast mixer supports you every step of the way. Record or stream to a computer via USB-C, or skip the computer and record full multitrack audio to an SD card for a truly self-contained setup.

Tech specs

DLZ Mix Agent

Guided setup walks you through channel configuration
Automatic Gain sets your input levels for you
Fast headphone output setup

DLZ Work Modes

Choose between Easy, Enhanced, and Pro

Transform the user interface to fit your experience level and needs

Auto Mix

Automatically reduces channel levels when not receiving signal
Ensures a consistent overall output level and reduces potential feedback in mix
10.1" High-resolution full-colour touch display with anti-glare coating
4 discrete XLR/TRS combo inputs
Stereo channel with dual 1/4" TRS inputs
Stereo channel with 1/8" TRS connection
Stereo Bi-Directional Bluetoothr channel
Onyx80 mic preamps with up to 80dB gain
14x4 USB-C audio interface to Mac/PC
Flexible multitrack recording and stereo playback to MicroSD and USB thumb drive
Professional audio processing
3-band parametric EQ + high pass filter
Noise gate / De-esser / Compressor
Atomizer Reverb and Chronotronic Delay
5 dynamically color-coded rotary controls
9 professional 100mm faders
Backlit mute, solo, sample triggers, and nav buttons
Sample playback
Instantly trigger pre-made samples via dedicated backlit buttons
Store your favourite sounds and record new ones on the fly to MicroSD
4 independent headphone outputs
Individual level control for each output
Create custom mixes for each output (pro mode only)
Hard power switch and locking power connector

Notes: The Precision Disrupter is a generative Eurorack sequencer that relies on controlled randomization to create melodic & rhythmic patterns with ease and relentless conviction.

The idea

Unlike other generative sequencers in euorack, the Precision Disrupter
offers complete command over the randomization parameters and then immediately empowers you with fine-editing controls for precise, real-time performance punch.

The bottom line

The Precision Disrupter is a melody generating powerhouse. Quickly find the the perfect sequence, breathe in the inspiration, and show them what you are made of.

Width: 40HP
Max Depth: 25mm
200mA @ +12V 5mA @ -12V

Notes: SumoBox Pro is a versatile, splashproof (IPX4 rated), portable speaker powered by a removeable/rechargeable lithium-ion battery pack and can deliver up to 108dB of pure sound power.

Removeable, rechargeable battery

8hrs playtime (up to) from the removeable 14.8V 5Ah Lithium-ion battery pack (included); instant continuity with a spare battery pack or by connecting to the mains supply.

IPX4 - Splashproof

Splashproof (IPX4) suitable for outdoor use in light rain or by the pool.

Pro Panel

Pro-panel with 3 input channels: TRS/XLR combo (x 2) with Reverb, Bass & Treble adjustment and Aux/Bluetooth, all with independent level control

SAMr by Devialet

SAMr by Devialet provides improved linearity and low-frequency performance - experience rich, detailed and powerful bass with limited audible distortion.

Be heard!

Powerful 2.0ch speaker system delivering 200W RMS / 108dB via 2 x 10" woofers + 2 x 3" tweeters.

Duo-mode/True Wireless Stereo (TWS)

Duo Mode: pair 2 SumoBox Pro speakers for True Wireless Stereo (TWS) left and right channel sound.

Speaker Link

Link 2 or more SumoBox Pro together via the amplified Speaker Link.

XLR/TRS Combo

2x XLR/TRS 6.3mm combo inputs - for multiple instrument types

Audio Product Features

Source Indicator: LED
Equaliser: Indoor / Outdoor
System languages: English
Carry System
Carry handle

Audio Systems

Speaker: 2 x 10" woofers + 2 x 3" tweeters:
Speaker power (W): 200 RMS
Sound Settings: Bass / Treble / Reverb

I/O Systems
USB: x2 (charging only)
Bluetooth Profiles: A2DP, AVRCP
Mobile App Controlled: Sharp Life
Bluetooth: Yes
Bluetooth Version: 5.0 + EDR

Power Information
Power Requirements: AC input 200~240V 50/60Hz
Power Consumption (W): 200
Standby Power Consumption (W): <0.5
Safety Logo Certification: CE (RED, RoHS, ErP), REACH/PAH/SCCP
Plug: CE/BS Plug
Built in Battery Type: Lithium-Ion (removeable battery)
Playtime Battery (h): 8 (up to)

Power Information

Power Requirements: AC input 200~240V 50/60Hz
Power Consumption (W): 200
Standby Power Consumption (W): <0.5
Safety Logo Certification: CE (RED, RoHS, ErP), REACH/PAH/SCCP
Plug: CE/BS Plug
Built in Battery Type: Lithium-Ion (removeable battery)
Playtime Battery (h): 8 (up to)

Logistic Information
Unit Size (W x H x D in mm): 455 x 690 x 350
Gross Weight (kg): 17.7
Packaging Content: CP-LS200 SumoBox Pro High Performance Portable Speaker, Rechargeable Lithium-ion battery pack, Silicone ball corner protectors (x8), Double-ended hex screwdriver, Power lead, User documentation

Design
Speaker Housing Material: Engineered wood
Housing Colour: Black
Front Material: Metal front grille with matt black finish
Portable: Yes
Water/Dust Protection: IPX4

Notes: Explore malleable sound. Mold, carve, bend.

The S-4 is a sculpting sampler designed to capture and transform sounds. Merging tape-era workflows with cutting-edge technology, the S-4 redefines sound mangling by providing a futuristic platform for crafting unique soundscapes and compositions, using samples and real-time audio processing.

S-4 is a tool made for sonic explorers. It has four parallel stereo tracks, each with an audio engine featuring a chain of audio devices including samplers, live granular processing, morphing resonators, and a range of audio effects. A novel modulation system allows anything and everything to be modulated with four modulators per track. Capture sounds on the fly with the onboard microphone and stereo line input, or load samples from the 4GB internal flash storage.

Use cases

The S-4 is a versatile powerhouse, capable of serving as an effects processor, transformative sound designer, tape machine, live looper, classic sample player, or textural synthesizer.

Tape machine

Capture your surroundings. Use S-4 as a transformative four-track tape machine.

Effect processor

Manipulate live audio, and add colour and textures to your beats, melodies, and sounds

Midi controlled sampler

Hook up a MIDI keyboard or sequencer and use S-4 as a powerful textural synthesizer and sample player.

Audio engine

Push the creative boundaries and transform audio into uncharted depths. S-4 has four parallel stereo tracks, each of which contains a chain of five audio devices tailored to cover specific sonic areas and applications. Create everything from glittering textures to broken soundscapes or evolving synth sounds.

Together, the devices form a playful toolbox for sculpting sample material and live audio.

Material

Stereo tape and sample players with live audio and looping capabilities.

Granular

Live granular processing with time-warping and pitch-shifting algorithms.

Filter

Morphing resonator: 48-band tuned filter bank with animation, tonal control, and classic filter functions.

Colour

Collection of destructive effects including bit crushing, drive, and compression.

Space

Combined reverb and delay with pitch-shifting and shimmer.

Modulation system

Animate and bring life to any parameter using the rich and unique modulation system. Each track has four configurable modulators that can be mapped to any parameter with unlimited mapping destinations. It is even possible to do cross-modulation between modulators. Choose between a range of different modulators from complex LFOs, and generative sequencers to envelopes.

Capture your surroundings

Utilize the built-in microphone to record sounds, sample and loop your external gear with the stereo line input, resample the internal tracks, or effortlessly load samples from the S-4's flash memory or an external drive.

Versatile powerhouse

The S-4 is designed with durable RGB buttons offering tactile feedback and a high-quality 3.5-inch LCD display ensuring all the visual feedback you need. It features USB connectivity for seamless connection to class-compliant devices and effortless file transfers to and from your laptop. Moreover, it can function as an audio interface when you require a simplified setup. You can also expand the number of inputs and outputs by connecting a class-compliant external USB interface.

Technical specifications

Audio engine features

4 parallel stereo audio tracks
Tape player with live looping capabilities
Polyphonic sample player
Live granular processing with time-warping and pitch-shifting algorithms
Morphing resonator (48-band filter bank)
Bit crushing, drive, and compression
Combined reverb and delay with pitch-shifting and shimmer

Modulation features

4 modulators per track
Modulate any parameter of the audio engine
Modulator types:
- Complex LFOs
- Generative sequencing tools
- Envelopes

Hardware

Quad-core 1.5 GHz processor
4 GB flash memory (sample pool)
24-bit / 48 kHz stereo audio in and out

I/O

2 line-inputs
2 line-outputs
Built-in microphone
Stereo headphone output
MIDI in/out
Analog sync in/out
USB-C

Miscellaneous

WiFi - Ableton Link
Class-compliant USB audio interface
Expandable number of inputs/outputs with class-compliant USB interfaces

User Interface

High-resolution LCD colour display, 3.5 inch
21 tactile RGB buttons
9 high-quality endless encoders

Physical

Matte black aluminium casing
Dimensions: 242 x 156 x 39 mm (9.5" x 6.1" x 1.5")
Weight: 820g (1.8 lbs)

Notes: WoFI is a portable Sampler keyboard that connects to the internet via WiFi, and features an innovative effect module called Texturer that combines elements of shimmer and granular synthesis to create unique and fascinating sounds. Its compact size and intuitive interface make it an ideal tool for musicians and producers who are always on the move. In addition, WoFI comes with a rechargeable battery, allowing you to create music anywhere you go without worrying about power. You can also share your patches and access sound banks from other sound designers through the mywo.fi community platform. Whether you're a beginner or a seasoned professional, WoFI offers endless possibilities for exploring new sonic territories and creating unique sounds.

Features

Player

The Player let you colour your sound with our emulations of classic samplers and their different sample player modes. Make it clean, dirty or anywhere in between.

Enveloppe

Sculpt your sound with the Enveloppe that can be assigned to WoFi's amp, filter or even both.

Manager

With the Manager and its display, get a visual feedback on all your tweakings, manage your sample library, access to mywo.fi content through WiFi and play with the touch strip. Oh, and there is no subscription needed for mywo.fi. Having WoFi gives you free access to community.

Filter

The Filter let you play the WoFi like classic subtractive synthesizers. It's a digital low-pass filter with two different slopes (12dB and 24dB) and a tasty resonance.

Texturer

The Texturer is here to bring you to unexplored sonic territories. Elevate your sound with this effect halfway between a shimmer FX and granular synthesis.

LFO

The LFO let you modulate your creation. With three different wave shapes, assign it to any parameter of the front panel and give motion to the sound.

Sequencer

The Sequencer let you build melodic patterns with the 16 polyphonic steps. It can be used as an arpeggiator. You can have your two hands free to play along the sequence and tweak your sound while it is looping. Oh, and you can also step sequence parameters, which makes it another modulation source in addition of the LFO and the Enveloppe.

Recorder

The Recorder let you either capture a sample from the line in or directly from the built-in microphone. It's easy as pie, pick your audio source with the switch, click on record and voila. Just like with the iconic first keyboard samplers.

Master

The Wofi is made to be played in many contexts, from your couch to the studio, so it has a full connectivity and two stereo audio outputs: one for your headphones and one for a master line-out and the WoFi internal speaker. Set your volumes easily.

Technical details

Player
- 48kHz 16 bits
- Direct streaming from flash, no preloading
- Polyphony 10 voices

Recorder
- 48kHz 16 bits mono
- Line / dynamic microphone / integrated microphone
- Gain adjust -6dB + 22dB
- Eurorack level compliant

Memory
- Flash embedded memory : 100 Mbytes, Flash cartridge memory : 100 Mbytes, Up to 200 User Patches + 50 Presets

100 MB allows storing 18 minutes of audio

Sequencer
- 16 steps track for notes
- 16 keys track for parameters sequencing


DSP
- Real time processing (No Preprocessing)
- Interpolation modes: sample & hold, linear, whittaker-shannon
- Pitch shift
- Time stretch
- Bit crusher
- Texturer
- Machine rendering emulation
- Resonant state variable filter (12dB/o-24dB/o)
- Parameter modulation from different sources : enveloppe, LFO, sequencer automations, external modulation (CV/MIDI), after touch, touch strip
- Texturer: self mixing renderer based on granular sampling - 8 grains - multi tap harmonizer

File servicing
- Direct file system management through USB
- Embedded sample editor

Network
- WIFI connectivity, up to 16 key pass
- Cloud access: Patch / Sample upload and download, sharing or backup.

Connectivity
- Sync clock + start/stop
- CV input, Gate input
- CV output, modulation output, gate output
- MIDI in, out, through DIN+USB
- Line In, Line out, Headphones


Miscellaneous
- USB powered
- Embedded battery - roughly 4h autonomy
- Integrated Microphone
- Integrated Speaker
- Full backup to Cartridge or mywo.fi
- User friendly workflow


- Aluminium / wood body
- Dimensions: 52cm x 23cm x 7cm

Notes: Updated version of Akai's excellent MPC One features increased storage, WiFi, Bluetooth and a striking new colour scheme. Full standalone beat creation masterpiece.

*** Introducing MPC Stems- March 2024 ***

Akai Professional now introduces the next chapter of sampling innovation and production powered by the groundbreaking MPC Stems bringing sampling into a new chapter.

With MPC Stems, you can access the raw building blocks of any sample or vinyl record, isolating the DNA of any record. Producers can now manipulate the Drums, Bass, Music, and Vocals, opening new creative possibilities.

Akai Professional introduces the ultimate creative workflow with Stems Separation seamlessly integrated into the leading MPC series, powered by MPC 2 Desktop Software.

With MPC Stems, producers and beat-makers can now unlock unmatched sampling creativity by easily isolating drums, bass, music, and vocals from any audio, vinyl recording, or sample revolutionizing the art of sampling.
Experience lightning-fast workflow with superior sound quality, keeping you inspired throughout the creative process.

Slice and isolate samples while maintaining chop regions across each of the four stem layers.

Take complete control with direct manipulation of stem layers from the pads, adjusting volume, pitch, pan, start, and end points with instant responsiveness.

MPC Stems requires MPC 2 Desktop Software running 2.14 or higher, compatible with MPC Live, MPC Live 2, MPC One, MPC One +, MPC X, MPC XSE, MPC Key 37, MPC Key 61, MPC Studio Mk 2 in Controller Mode.

Supplier's Notes:
MPC One +

Standalone MPC with 7" touchscreen / WiFi & Bluetooth

Supercharge your beats

Standalone supercharged

The new MPC One+ brings a jolt of energy to the standalone workflow to enhance creative speed and efficiency. With MPC One+, beatmakers producers to live performers can enjoy the creative journey like never before.

Pure standalone power in your hands

At the heart of MPC One+ is the powerful multi-core processor, the same featured in the flagship MPC X. This isn't a scaled down little brother, but a production unit built with the same DNA for high-level music creation. Instruments, audio, MIDI, and effects processing to bring the music to life. With an upgraded 16GB of internal storage, create and store more of your inspired moments right in MPC One+ for immediate access and recall.

Wireless for the future

New Wi-Fi and Bluetooth connectivity opens a new world of possibilities for your creative workflow. With Wi-Fi, you now have access to Ableton Link 3 to wirelessly connect and sync all your capable devices. Lock patterns and grooves for a mega creation without any cables or connections. Grab your Bluetooth enabled MIDI controller to lay down synths and melodies while your infectious rhythms have you vibing to the beat. Pair with a wireless QWERTY keyboard to search through folders and libraries accurately. With Wi-Fi and Bluetooth, your MPC One+ may be untethered but you are locked right into the music.

The centre of your creativity

MPC One+ is meant to be the focal point of your creative workspace. Whether you need compact, efficient beat-making or expanded interconnected production and composition, MPC One+ is versatile enough to accommodate any need. Connect your studio speakers to Stereo Outputs for accurate monitoring. A pair of Line Level Inputs are ready for keyboards, synths, instruments, hardware processors, and more. Expand your I/O with support for ClassCompliant Devices via a USB A host port. Connect your favorite plug-and-play USB MIDI Controllers, Audio Interface Devices, or removable storage drives, and take your production up another level with ease.

The workflow that sparks inspiration

MPC is the premier platform for all pattern-based music from EDM to Electro, Hip-Hop to House, and beyond. With 128 MIDI and 8 Audio Tracks per project, MPC One can capture any idea just as fast as you can think it. Browse thousands of MPC Plugin Instrument Presets to find that perfect sound to build melodies or shape harmonic phrases with massive sonics. Lay down serious drums and percussion with the signature MPC groove and precision. 16 Levels, Note Repeat, and Time Correct have defined the rhythmic feel for generations and continue to be the foundation for hit song after hit song. Use the pads in combination with Notes and Chords modes to unlock a completely new world of pad performance using the 16 velocity-sensitive RGB backlit pads.

One place for your sounds, samples, and songs

MPC One+ grows with you as you evolve on your music production journey. Update features, sounds, and samples wirelessly thanks to built-in Wi-Fi. When new MPC plugin instruments are available, you'll enjoy instant notifications as well as downloads and software authorizations right from your MPC One+. Browse and sync your curated Splice loops and samples and give your productions a breath of fresh inspiration whenever you need it. Keep all your sounds and instruments right within reach to instantly capture the most inspired moments anytime.

The next step of your MPC journey

MPC One+ is here for the producers and beatmakers ready to take the next step in the journey. Upgrade to MPC One+ from MPC Beats and load your old projects seamlessly on MPC One+. Your MPK mini or other class-compliant controller connects for powerful keyboard control of popular MPC plugin instruments like Hype, Mellotron, or Odyssey. For a limited time, receive a voucher for a free MPC Plugin instrument download from the MPC Store with the purchase and registration of a new MPC One+. MPC One+ has arrived and the musical possibilities ahead of you are endless with the power of its supercharged standalone workflow.

Technical Specifications

Pads
(16) velocity- and pressure-sensitive pads, RGB-backlit
(8) banks accessible via 4 Pad Bank buttons

Knobs
(4) 360- touch-sensitive Q-Link knobs for parameter adjustment
(1) data encoder for value adjustment and selection via push

Buttons
(31) dedicated-function buttons

Display
7.0" / 177 mm (diagonal)
5.9" x 3.7" / 151 x 94 mm (width x height)
Full-colour LED-backlit display with touch interface

Memory
Processor: Quad-core ARMr processor
RAM: 2 GB
Storage: 16 GB (over 7.8 GB available for user storage)

Power via power adapter (12 V, 3.0 A, center-positive, included)

Connections
(2) 1/4" (6.35 mm) TRS inputs (1 stereo pair)
(2) 1/4" (6.35 mm) TRS outputs (1 stereo pair)
(1) 1/8" (3.5 mm) stereo headphone output
(1) 5-pin MIDI inputs
(1) 5-pin MIDI output
(4) 4 TRS CV/Gate Jacks, 8 Outputs Total
(1) USB Type-A port
(1) USB Type-B port
(1) SD Card slot
(1) Power Adapter input

Dimensions (width x depth x height)
10.7" x 10.7" x 2.1"
272 x 272 x 53 mm

Weight
4.7 lbs / 2.1 kg

Notes: Akai's mid-range MPC features full-size pads plus a built-in rechargeable battery and speakers. Integrated phono stage makes it easy to sample from vinyl. A hugely capable studio centrepiece.

*** Introducing MPC Stems- March 2024 ***

Akai Professional now introduces the next chapter of sampling innovation and production powered by the groundbreaking MPC Stems bringing sampling into a new chapter.

With MPC Stems, you can access the raw building blocks of any sample or vinyl record, isolating the DNA of any record. Producers can now manipulate the Drums, Bass, Music, and Vocals, opening new creative possibilities.

Akai Professional introduces the ultimate creative workflow with Stems Separation seamlessly integrated into the leading MPC series, powered by MPC 2 Desktop Software.

With MPC Stems, producers and beat-makers can now unlock unmatched sampling creativity by easily isolating drums, bass, music, and vocals from any audio, vinyl recording, or sample revolutionizing the art of sampling.
Experience lightning-fast workflow with superior sound quality, keeping you inspired throughout the creative process.

Slice and isolate samples while maintaining chop regions across each of the four stem layers.

Take complete control with direct manipulation of stem layers from the pads, adjusting volume, pitch, pan, start, and end points with instant responsiveness.

MPC Stems requires MPC 2 Desktop Software running 2.14 or higher, compatible with MPC Live, MPC Live 2, MPC One, MPC One +, MPC X, MPC XSE, MPC Key 37, MPC Key 61, MPC Studio Mk 2 in Controller Mode.

Supplier's Notes:
Meet MPC Live II, the full MPC experience in its most portable configuration yet. Everything you need to make music, anywhere, right at your fingertips.

There's no need to compromise for portability. MPC Live II is the complete MPC experience without missing a step. A rechargeable lithium-ion battery means you can work anywhere for hours. Full-size MPC pads give you the ultimate in drum performance and the expanded function buttons allow for quick editing on-the-fly so you never miss a beat.

For the first time ever, you now have studio-grade monitors built-in directly to your MPC. No need to waste precious time looking for your headphones, untangling cables or powering up external monitors. These full range stereo monitors deliver low end thump along with tight top end to make portable beat-making the sonic experience you need to feel your music.

MPC Live II integrates into your creative space with all the ports, jacks and connectivity you need. USB 3.0, 2x2 MIDI, CV/Gate, 3 stereo outs and more. WiFi and Bluetooth connectivity make for a completely wireless workflow. No matter the device, MPC Live II is ready to get connected!

MPC Live II will super charge your production. With MIDI performance to tap in to as many devices as you need, an intuitive and streamlined layout not to mention the MPC workflow features you need; 16 Levels, Note Repeat, Auto Sample, Chords & Notes More and so much more. Get ready to level up to the MPC Live II.

KEY SPECS:

Pads:
(16) velocity and pressure-sensitive pads, RGB-backlit
(8) banks accessible via Pad Bank buttons

Knobs:
(4) 360- touch-sensitive Q-Link Knobs
(4) Q-Link Knob columns accessible via Q-Link button
(1) 360- encoder for display navigation and selection via push

Buttons:
(27) dedicated function buttons; red, amber, or green backlit

Display:
6.9" / 176 mm (diagonal)
5.9" x 3.7" / 150 x 93 mm (width x height)
Full-color LED-backlit display with touch interface

CPU: Quad-core ARMr processor
RAM: 2 GB
Storage: 16 GB, expandable via SATA connections

Connections
(2) 1/4" (6.35 mm) TRS inputs (1 stereo pair)
(6) 1/4" (6.35 mm) TRS outputs (3 stereo pairs)
(1) 1/4" (6.35 mm) stereo headphone output
(2) RCA inputs (1 stereo pair)
(2) 5-pin MIDI inputs
(2) 5-pin MIDI outputs
(4) TRS CV/Gate jacks, 8 outputs total
(1) Ethernet link port
(2) USB Type-A ports
(1) USB Type-B port
(1) SD Card slot
(1) Power Adapter input

Power:
Via power adapter: 19 V, 3.42 A, center-positive, included
Via battery: Up to 5 hours of battery life

Dimensions (width x depth x height):
16.2" x 9.6" x 1.8"
411.5 x 243.8 x 45.7 mm

Weight:7.45 lbs/3.38 kg

Notes: Successor to the excellent Metropolis, the Metropolix is a performance-focussed step sequencer with some really neat features, including modulation and sub-sequences in Loopy mode.

Supplier's Notes:
The Intellijel Metropolix is a unique and powerful Eurorack format musical sequencer. With an abundance of hands-on, tactile controls and a wealth of modulation possibilities (both internal and external) you can quickly and easily create infectiously musical sequences that are never boring. Even the simplest riff can be brought to life with seemingly endless options to create variations or real-time manipulations. Equally at home in the studio or a live improvised performance, the Metropolix is sure to become a staple source of fresh ideas and killer riffs in your creative process.

Width: 34HP
Depth: 25mm
Power: 95mA @ +12V 10mA @ -12V

On first blush, it appears to be a simple 8-stage sequencer - but there is far more functionality than first meets the eye:

There are two tracks (TRK 1 and TRK 2) that are variants of the single master pitch/gate sequencer, which is programmed via the PITCH sliders, PULSE COUNT and GATE TYPE switches. Each track interprets the master sequence in a variety of ways - creating complementary sequence variations that enable you to generate counterpoint, polyrhythms, and all manner of sonic movement (both subtle and extreme). Each of these tracks has its own playback ORDER, sequence LENgth, clock DIVision, SWING amount, SLIDE time, and track GATE lengths. Other track-based sequence variables are accessible from the TRACK MENU, and include Pitch Slider inversion; sequence note range; track transposition; and more. In addition, Tracks 1 & 2 both have multiple lanes of per-stage playback parameters, including: GATE override; PITCH override; RATCHet count; PROBability of playback; ACCUMulating transposition, and a dedicated CV lane. Each stage also has a SKIP feature, and a pitch SLIDE option.

8 separate and individual MODulation lanes are accessed via the MOD button. Each MOD lane has 8-stages of modulation values and its own playback ORDER, LENgth, and clock DIVision; and each lane is routable to one of Metropolix' two assignable outputs or to dozens of internal destinations, allowing for some sophisticated and powerful self-modulation.

A trio of AUX inputs allows for external modulation of user-assignable sequencer parameters for even greater variation, while two assignable CTRL knobs give you direct access to the parameters you want to adjust most frequently during a performance. With dedicated Pitch/Gate outputs for both Track 1 and Track 2; two totally user-assignable outputs (A and B); and internal MOD routing, Metropolix features a wealth of patching opportunities.

Metropolix also features a Loopy mode, allowing you to instantly play back short sub-sequences, or even "play" the stage buttons directly (like a 'keyboard').

Metropolix stores up to 64 preset configurations (in 8 banks of 8 presets), and all live settings are stored in EPROM, ensuring that your Metropolix will always power up exactly as you left it - even if you haven't saved them to a preset. By default presets can change all the structural (menu-based) elements of your sequencer without overwriting the front panel controls, but full recall is also available.

The operation of the Metropolix is optimized for live performance and jamming, with quick access to all the most important performance parameters, and the ability to greatly affect your sequences with a single slider or switch.

Notes: A typically unique take on multi-effects from Soma, designed to induce meditative states. Hybrid analogue-digital delay/reverb/granular processing gives a range of creative approaches.

Supplier's Notes:
COSMOS is a drifting memory station designed to work with meditative states through music. The design of the controls, functions and generated soundscapes are intended to evoke, in both performer and listener, states and experiences inherent in meditation, such as limitless space, fluidity, spontaneous development, presence, the ability to hear, tranquility, the experience of subtle harmony and happiness enveloping the whole world.

From a functional point of view, COSMOS is a large array of sound memory, in which recorded sounds undergo constant recombinations, spontaneously generating an ever-changing soundscape. This is achieved in three ways - by a mathematical shift based on the relationships between large prime numbers (the size of all delay lines are different primes), an asynchronous operation of the LFO, and modulation with a slowly changing chaotic signal. As a result, it allows the endless layering and processing of various sounds, as in a looper, but without an intrusive, repetitive loop.

COSMOS generates rich, fluid and evolving soundscapes perfect for ambient music. Using COSMOS, you can play an entire meditative solo concert while being in a spontaneous flow and without using studio-prepared sequences, backing tracks and other things that can't be a reflection of the "here and now".

Specifications

Minimum input voltage: 0.35 V peak-to-peak
Maximum output voltage at line outputs: 11.3 V peak-to-peak
The maximum output voltage at the headphones output: 10.4 V peak-to-peak
Frequency response: 10-22000 Hz
Sound memory: 44.7 sec
Supply voltage: 12 V *
Power connector polarity: centre plus
Current consumption: 0.25 A
Dimensions: 342 x 153 x 68 mm
Weight: 2.2 kg

* Use only the power supply supplied with the device! In case of failure, it can be replaced with a high-quality modern switched-mode power supply with an output voltage of DC 12 volts, the center is plus and an output current of at least 0.5 amperes (more is fine). The power supply must have a wide AC input voltage range of 100-240 volts. Such power supplies have excellent output voltage stabilization required for the device. It is forbidden to use COSMOS with nonstabilized voltage from transformer power supplies. It can lead to damage to the device, which is not covered by the warranty repair!

Notes: The legend is back. Updated and re-engineered for the 21st century, the classic Technics DJ turntable remains the industry standard. Top sound, top build quality.

Supplier notes:
The SL-1210MK7 is the newest model of the SL-1210 Series. For the development of this model, all that modern-day DJs need and want was reviewed from the ground up. At the drive section of the MK7 is a coreless direct drive motor. While achieving both stable rotation and powerful torque, this has successfully eliminated a rotation irregularity called cogging, which was the only drawback of the direct drive system. As a result, sound quality was further improved. The pitch control incorporates digital control to achieve improved tracking performance and accuracy. The buttons and tonearm are black to complete the all black design, and the LED light can be set to illuminate in red or blue. A reverse play function has been added to expand the breadth of DJ play style. With those features and functions, the MK7 aims to set a new standard for DJ turntables.

Notes: Make Noise is proud to introduce Strega!Strega is an audio alchemical experiment. Activate! Spill the tonic into time and let time decay through the filter to hear the results.

Strega is an instrument designed in collaboration with Alessandro Cortini. Inspired by Cortini's music and sonic experimentations, Strega embodies the seen and unseen, the sign and magic, the alchemy of sound.

Strega is able to conjure audio tones, generate control signals, and process external sounds. Patch the 0-COAST or any other line level source into the Strega to unlock new sounds!

This new instrument takes the same form factor as the 0-COAST and 0-CTRL. It was designed to be controlled by the 0-CTRL or the 0-COAST's MIDI CV B outputs and is equally happy interfacing with Eurorack modules as well.

Dimensions: 5.5 x 9 x .75 inches

Weight: 1.7lbs

Power Requirement: +15VDC @1A, 2.1mm Tip Positive Connector

Notes: Powered by the Engine DJ OS, this updated take on Numark's Mixstream Pro features built-in Wi-Fi and speakers plus large 7-inch touchscreen and full integration with Amazon Music Unlimited streaming.

*** Update March 2024- Engine DJ 3.4 Performance Software for Hardware (OS) ***

New Features
Bluetooth Audio Input and Keyboard Connection for Supported Devices

Bluetooth Audio Input - Wirelessly play audio from a Bluetooth-capable device on your supported Engine DJ hardware

Assign to any individual hardware channel or main audio output
Assign to layer A or B on the Denon DJ SC6000 and SC6000M
Bluetooth transport controls allow you to play, pause, and track skip using the touch screen or hardware controls when connected to a capable Bluetooth device
Hardware screen displays Track Title, Artist, and track progress when connected to a capable Bluetooth device

Bluetooth Keyboard Support - Search for songs on your Engine DJ hardware more quickly and efficiently
Bluetooth menu option in the Control Center allows you to connect and manage Bluetooth keyboards and audio devices

Additional Bluetooth Compatibility Information

It is recommended that you confirm the Bluetooth connectivity and functionality of your computer, smartphone, or other device before using it in a live situation

Not all Bluetooth devices and audio applications provide support for Bluetooth Transport controls and track information

Track Progress is not updated on Engine OS when it is adjusted using the originating software/app

Engine DJ Preparation Software (Desktop)
Improvements and Fixes

Fixed an issue where sync manager export would take longer if SoundSwitch content is being packed

Fixed an issue where tracks would not pack via drag and drop if there are 2 drives with the same or similar names connected

Various other stability enhancements and improvements


Supplier's Notes:
Millions of tracks at your fingertips

The Mixstream Pro + integrates with Amazon Music Unlimited and other popular streaming services, giving you instant access to over 100 million CD quality (aka "lossless") songs across all musical genres. The built-in Wi-Fi and lightning- fast onboard song analysis lets you practice and perform for hours on end without owning or preparing any music ahead of time. Tracks are analyzed for bpm and key as they are loaded and buffered into the internal memory, ensuring uninterrupted playback at every party, gig, or livestream.

Immersive built-in speakers

The Mixstream Pro + features high-quality built-in speaker monitors with dedicated volume control. These custom-tuned drivers produce rich, full sound and are the perfect sound solution for casual listening, cookouts, and parties with family and friends. For professional DJs, the built-in speakers are the ultimate, convenient solution for practicing, livestreaming, video content creation, and personal monitoring when connected to a larger sound system.

Set your smart home to party mode

The Mixstream Pro + connects wirelessly to Phillips Hue and Nanoleaf smart home lighting, making it easy to add dynamic visuals to your next party or livestream. Using the built-in Engine Lighting embedded control, connecting to a Philips Hue lighting hub or Nanoleaf system only takes a few taps. Once connected, the smart lighting will instantly and automatically change color and brightness perfectly on-time with whatever song is playing. The impressive on-screen lighting controls provide hands-on control over custom color selection, strobing, and more! The lights even respond to the movements of the crossfader, volume controls, and scratching for an amazing, immersive audio/visual experience!

Advanced lighting integration and control

For advanced lighting options and features, professional DJs can pre-analyze their music library with SoundSwitch desktop software, export their library to a USB drive, SD card, or to their Dropbox cloud, and have full control of DMX lighting using the touchscreen of the Mixstream Pro +. This functionality makes it simple to provide a professional lighting experience at events and gigs without the need to bring along a laptop or DMX controller.

Enjoy the freedom of laptop-free performances

The Mixstream Pro + features 2 USB inputs and 1 SD card slot for external media drives for optimum versatility when it comes to music selection and library curation. Quickly prep playlists from Serato, rekordbox, and iTunes using the Engine DJ desktop software, export to a USB drive or SD card, insert the drive in the Mixstream Pro +, and then perform your entire show without the need for a laptop or computer.

Multiple DJ performance options

In addition to being able to DJ in Standalone Mode with Engine DJ OS, the Mixstream Pro +'s Computer Mode allows you to use the device as a DJ software controller for Serato DJ and Virtual DJ (Serato DJ Lite is supported for free, a paid license is required for Serato DJ Pro and Virtual DJ). When in Computer Mode, the Mixstream Pro +'s touch screen offers hands- on control over library navigation, song selection, FX control, and more. This incredible flexibility gives you the option to choose exactly how you'd like to perform at your next show.

Ultimate control for musical creativity

The intuitive layout and 7" high-definition touchscreen lets you browse, load and play with your music like never before. The 4 built-in effects (Echo, Flanger, Delay, and Phaser) are perfectly timed to the beat when they are triggered with the fun, interactive toggle switches. The large Filter knobs and 3-band EQ add even more excitement by providing hands-on control over the low, mid, and high frequencies to create dramatic mixes, blends, and transitions.

Scratching with the large, 6" touch-sensitive platters is easy thanks to the Smart Scratch feature, which ensures that the music always stays on beat after a scratch is added to the mix. The 8 dual-layer Performance Pads feature 4 pad modes (Cue, Saved Loop, Auto Loop, Roll,) providing limitless possibilities for live mixing and ultimate creative musical freedom. Plus, since the Mixstream Pro + harnesses the power of the Engine DJ ecosystem, DJs have direct access to an ever-expanding set of advanced, professional-grade performance features.

The Mixstream Pro + offers a new level of music access, performance capability and connectivity in a DJ controller. All in an easy to use, intuitive package that makes it simple and fun for DJs to connect, stream and play!

Technical Specifications

Connections

Audio Outputs

(1) XLR output pair (main left/right, balanced)
(1) RCA output pair (main left/right, unbalanced)
(1) 1 1/4" (6.35 mm) stereo output (headphones)
(1) 1/8" (3.5 mm) stereo output (headphones)

Audio Inputs

(1) 1 1/4" (6.35 mm) microphone input Other
(2) USB port (for USB drives)
(1) USB port (to computer
(1) SD card slot
(1) power adapter input

Audio

Main Outputs

Frequency Response: 20 Hz - 20 kHz +/- 1 dB
Dynamic Range: > 114 dB (A-weighted)
Signal-to-Noise Ratio: > 94 dB (A-weighted)

Headroom

Mic: > 16 dB
Outputs: > 16 dB

Channel Separation: < -110 dB (1 kHz, unity)

T.H.D

Line: < 0.01% (1 kHz, unity)
Microphone: < 0.05% (1 kHz, unity)


Speakers

Frequency Response: 20 Hz - 20 kHz +/- 1 dB

Analogue Input

Microphone: -40 dBu (unity) / -60 dBu (minimum)

Analogue Output

Master, Balanced: +20 dBu (maximum) / +4 dBu (unity
)Master, Unbalanced: +16 dBu (maximum) / 0 dBu (unity)
Headphone Output: < 30 mW

Power

Connection: DC, Center Positive
Voltage: 12.0 V 3.0 A

Dimensions (width x depth x height)

Width x Depth x Height: 22.3" x 11.2" x 2.9" / 566 x 284 x 74 mm
Weight: 8.11 lbs.3.68 kg

Notes: Eurorack version of 1010's superb Bluebox. Vast power in 30 HP, with the ability to mix, record and play back in mono and stereo, hook up to a computer over USB for stereo I/O and run effects, all with CV control.

Supplier's Notes:
The bluebox Eurorack edition is the new Eurorack mixer with effects and multichannel recording/playback based on the award-winning bluebox desktop mixer. With the Eurorack edition's USB-C EXT port, you can send 2 channels of audio to and from your computer. Plus, you can control up to 6 mix settings with the 6 CV inputs. Whether recording your Eurorack jams, using it to play stems as backing tracks, or a combination of both - bluebox Eurorack edition will rock your rack!

Connect your eurorack, sampler, drum machine, and synthesizer outputs to 12 mono, 3.5 mm inputs and map them to 12 mono tracks or 6 stereo tracks - all with independent control for recording and playback. Connect your computer to the USB C port to send and receive two channels of audio.

The bluebox Eurorack edition is the ultimate in compact mixing, effects, recording, and playback for Eurorack. Smack it in your rack and hit the road with a self-contained, electronic music powerhouse!

When you purchase a bluebox Eurorack edition, you will receive:

a bluebox Eurorack edition 30 HP Eurorack module
A microSD card with bluebox firmware and pre-loaded project files
two Eurorack power cables
a bluebox Eurorack edition Quick Start guide
two MIDI Adapters

Technical Specs

Dimensions & Power
30 HP
Module dimensions including knobs: 6" x 5"x 1.6"
Depth behind front panel with ribbon cable: 1.0"
Requires the +5V rail which may not be present
on some older racks.
Uses 500-850mA at +5V (depending
on screen brightness), 320 mA at +12V, and 82mA at -12V
Requires two power connections
Capabilities
12 mono tracks, 6 stereo tracks or something in between
Connect to TRS or USB C MIDI for beat syncing effects
Lots of headroom with support for Eurorack levels up to +/-5V inputs and outputs
3 effects: reverb, delay and compressor
Records and plays back 48k, 24-bit audio WAV files
4 band EQ per track
Durable aluminum faceplate
Stream 2 channels of audio in and out over USB C

Inputs and Outputs
12 mono 3.5 mm TS inputs
2 independently controlled 3.5 mm TS output pairs that can be used as 4 mono outputs
1 stereo 3.5 mm headphone output
6 CV Inputs
1 USB C MIDI Device port
1 TRS MIDI Input
1 TRS MIDI Output
1 USB C Ext jack for streaming audio
3.5" touch screen, 4 knobs, 8 navigation buttons and 3 transport buttons

Notes: Second-generation version of 1010's outstanding Bitbox sampler module, featuring improved processing power, higher-quality touchscreen and new effects.

Supplier's Notes:
Next Generation Sampling Module for Eurorack

The bitbox mk2 is a follow up to 1010's successful bitbox module. Do more with bitbox mk2's more powerful processor and improved touch screen. This module has all of the features of the original bitbox and adds effects and mixing capabilities that take advantage of the faster and more powerful processor.

Sample Playback

Play up to 24 polyphonic notes when your samples fit in the 64 MB of internal memory or up to 8 larger samples streaming directly from the microSD card
Configure 16 sample pads per preset as single or multi-samples, clips, slicers, granular or new recordings
Stream long samples from the microSD card with a max sample size of 4 GB, which can be many hours of audio
Trigger samples with the touch screen, CV gate inputs, or MIDI input
Use MIDI for polyphonic playback of samples or slices
Control how samples start and stop by choosing from one-shot, toggle, and gate launch modes
Tweak playback through a variety of sample parameters, including start position, length, pitch, gain, filter, loop mode, launch quantization, ADSR, Exclusive Grouping, clip synchronization, slice placement and sequencing, grain size, grain spread, grain count, and MIDI note and channel mapping

Sample Recording

Record Eurorack level audio straight into the module:

Record samples from a stereo audio input pair
Configure each pad for stereo or mono recording with the option to synchronize the start and stop times to clock inputs
Trigger recording via audio level threshold
Create perfectly sized loops by setting the recording length
Enable immediate playback after recording for live looping capabilities
Make recordings up to 4 hours in length
Store recorded samples as WAV files on the micro SD card then remove the card to transfer them to your computer
Sample Modes

Find creative ways of using your samples with our 5 sample playback modes:

Trigger one shots or launch loops using sample mode
Load a folder of samples into a sample mode pad to improve the quality of the pitch shifting when playing a sample chromatically or to trigger different samples with each note
Play time-synchronized loops with constant pitch time shifting in clip mode
Skip between slices of a WAV using slicer mode
Create rich textures and other worldly sounds with granular mode
External Control and Synchronization
Playback can be immediate or synchronized to internal clock, TRS clock in, or MIDI clock in and out
Trigger each pad independently through a dedicated gate input
Use MIDI to trigger pads via a note per pad
Play a single or multi-sample pad pitch shifted using MIDI notes or CV
Trigger different sample slices using MIDI notes or CV
Modulate a wide variety of sample parameters through the MIDI input and up to 8 CV signals
Quickly set up MIDI modulation using Learn mode - no need to look up CC numbers
Module Features
Use the 3.5" diagonal touch screen to intuitively explore the features of the module
Get more creative with double the processing power of the original bitbox
Fill out your sound with reverb and delay
Import or export WAV files with your Mac or PC using a microSD card
Save and recall multiple presets
Increase your capacity with larger microSD cards
Select Flipped UI mode to mount the unit with the screen on the bottom and use the screen, knobs, buttons, and CV jacks as you normally would

When you purchase a bitbox mk2, you will receive:

a bitbox mk2 Eurorack module
a microSD card with with a bank of demo presets and samples loaded on it
a Eurorack power cable
a bitbox mk2 Quick Start guide
a MIDI Adapter

Technical Specs

Supports 1 and 2 channel WAV files with 16, 24 or 32-bit resolution at any sample rate (48kHz preferred)
26 HP
Module dimensions including knobs: 5.25" x 5"x 1.75"
Depth behind front panel with ribbon cable: 1.25"
+12V: 400mA
-12V: 0mA
5V: 0mA
24-bit ADC and DAC

Inputs and Outputs

Connect up to 8 CV modulators to control numerous sample parameters
Trigger each of the 16 pads with a dedicated gate input
Record through the dedicated stereo audio input pair
Use CV to keep time through the dedicated clock input
Confidently connect with both TRS MIDI Type A and Type B, no adapter needed
Route the audio from each pad out to one of 2 stereo audio output pairs or any of the corresponding single channels
Inputs and outputs are DC coupled so you can record and play out CV signals

Notes: Mid-range DJ mixer from the leading UK brand. Fully analogue four-channel design with A&H's much-loved Xone filter section. Very tempting alternative to the flagship Xone:96. Excellent value.

Supplier notes:
Created for DJs and electronic music purists, Xone:43 is a 4+1 channel DJ mixer that offers the very best of analogue audio quality, including the legendary Xone filter with resonance control, 3 band EQ, crossfader with three curve settings and X:FX for send/return to your favourite FX unit.

The crossfader has three switchable curve settings for blending or scratching styles and can be easily replaced or upgraded to a custom Innofader for ultimate crossfader performance.

With balanced XLR main outputs, independent booth and record outputs, Xone:43 excels in the club and in high end personal DJ setups.

Notes: Silver version of the rebooted SL-1200, updated and refreshed in MK7 form. Still sounds great, still built like a tank and still the industry standard DJ deck.

Supplier's Notes:
Coreless Direct Drive Motor Achieving Stable Rotation

The direct drive system uses a slow-turning motor to directly drive the platter. This system has various advantages. It offers high performance, such as rotation accuracy and powerful torque, does not require replacement of parts and maintains high reliability over a long period of time. On the other hand, the direct drive system was said to produce a rotation irregularity called cogging. For the SL-1200MK7, a new coreless direct drive motor was developed. This motor employs a coreless stator. The removal of the core (iron core) from the stator eliminated the root cause of cogging. Furthermore, the magnetic force of the rotor magnets was improved to the highest possible level, and the gap between the coreless stator and rotor magnets was optimised, thus achieving high-torque-performance equalling that of the SL-1200MK5. Boasting smooth rotation and powerful torque, this motor reproduces sound accurately and faithfully from the groove on an analogue record.

Diverse New Functions Adapt to Various Playing Styles

The newest digital motor control technology, accumulated through the development of Blu-ray disc products, is applied to improve adjustment by allowing the torque and brake speed to be adjusted individually in four steps.

The pitch control function allows fine adjustment of the rotation speed within i8 % / i16 %. It does this through digital control, from positional detection of the slider to rotational control of the motor, eliminating the unnecessary DA conversion. This greatly improves tracking performance to achieve accurate and stable pitch adjustment.

Reverse Play Function

The reverse play function, which brings forth new possibilities of creative performance, makes its first appearance in the SL-1200 Series. In addition to 33-1/3 rpm and 45 rpm, a rotation speed of 78 rpm is supported.
*The torque / brake speed adjustment, rotation speed switch, and reverse play can be adjusted by switches on the main unit.

The tonearm, which has continued to support the leading edge of the DJ scene for many years, inherits the highly reliable static-balance universal S-shape tonearm. Using high-precision bearings, it achieves a higher initial-motion sensitivity than the SL-1200MK6. This accurately tracks the groove on the phonorecord to assure excellent tracking performance with minimum stylus jumping even in harsh playing conditions such as scratching.

The stylus illuminator features a new push-type structure for intuitive operation, and employs a high-brightness and long-life white LED. The illumination area and intensity were reviewed to provide improved visibility of the stylus tip even in a dark environment.

Power / Phono Cable Terminals

The power and phono cable terminals allow detachment of the cables. The phono terminals are gold-plated to minimise sound quality degradation. Since the terminals allow disconnection of the cables, maintenance of the cables is easier.

High-rigidity Cabinet and High-damping Insulator

The chassis, an essential part for reducing external vibrations, inherits the audio quality enhancement technology fostered through the development of high-end turntables. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS mixed with glass fibre to achieve a two-layer construction. The combination of this special high-rigidity material and a metal chassis raised the rigidity and vibration-damping performance to higher levels, realising a robust cabinet for beautiful sound reproduction. The insulator is comprised of a spring and rubber to provide optimal frequency characteristics. This not only assures high sound quality and superb howling resistance, but also effectively shuts out external vibrations under high sound level conditions.

Specs:

Type: Direct Drive Manual Turntable
Turntable Speeds: 33-1/3, 45 rpm (with switch 78 rpm)
Starting Torque: 0.18 N .m / 1.8 kg . cm
Build-up Characteristics : 0.7 s. from standstill to 33 1/3 rpm
Wow And Flutter: 0.025 % W.R.M.S.
Turntable Platter: Aluminium diecast
Diameter: 332 mm (13-5/64 inch)
Weight: Approx. 1.8 kg (4.0 lbs) (including slipmat and slipsheet)

Tonearm
Type: Universal Static Balance
Effective Length: 230 mm (9-1/16")
Overhang: 15 mm (19/32")
Tracking Error Angle: Within 2- 32' (at the outer groove of 30 cm (12") record) - Within 0- 32' (at the inner groove of 30 cm (12") record)
Offset Angle: 22-
Arm-height Adjustment Range: 0 - 6 mm
Stylus Pressure Adjustment Range: 0 - 4 g (Direct Reading)
Head Shell Weight: Approx. 7.6 g
Applicable Cartridge Weight Range: (without auxiliary weight) 5.6 - 12.0 g, 14.3 - 20.7 g (including head shell)
Head Shell Terminal Lug: 1.2 mmf 4-pin terminal lug

Notes: Brilliantly unusual synth based on eight analogue tone generators, functioning more like an electric organ or FM synth than a conventional subtractive architecture. Unique sound.

Supplier notes:
Welcome to the world of sound of LYRA-8, the unique organismic analogue synthesizer designed by Vlad Kreimer. "Organismic" means that LYRA uses some principles that lie in the base of living organisms. The way how LYRA's modules interacting between each other and the behaviour of the instrument resembles a live conversation.

LYRA-8 is based on eight generators, which will be referred to as voices. Their design is not like a traditional subtractive synthesis VCO. Instead of having a linear or logarithmic dependency on control voltage, they resemble the tone generators in old electric organs. Hence the use of the term "voices" instead of VCOs. Lyra uses non-linearity a lot, and the voices are constructed in such a way that allows for non-linearity to express itself.

The voices are divided into four pairs (12, 34, 56, 78). All the pairs are divided in two groups, with two pairs in each (1234, 5678), creating tree-like structure.

The voices can function either in an electric organ mode or in an FM synthesis mode with each of the voices and its envelope acting as a separate FM operator. The voice's impact on FM synthesis will decrease along with the decay of its envelope.

LYRA-8 also has the next blocks:

The HYPER LFO is a complex low-frequency generator, whose waveform is synthesized from two simple LFOs by summation or multiplication of their frequencies. It also has a sync mode. The LFO can modulate the selected pairs of voices and the MOD DELAY.

The MOD DELAY consists of two lines of delay with cross-feedback and a special architecture that enables resonance between the two lines. Each line's delay time can be individually modulated from various sources, including external ones. The delay has a unique possibility of self-modulation where the output signal modulates the delay sample rate, creating cool effects.

The DISTORTION is last in the chain, after the delay. It enables the delay to also influence the distortion.

For all its experimental character, LYRA is a professional instrument. Its output dynamics and frequency response are balanced and ready for a live performance or studio recording without any additional processing.

Specifications:

Max output voltage: 2 v 0-to-peak
Output connector: mono 6.3 mm TS or TRS (balanced) jack
Output resistance: 100 Ohm
EXT IN: 1 v 0-to-peak
EXT IN connector: 6.3 mm TS jack
HOLD GATE: full HOLD volume +5 V
HOLD GATE connector: 6.3 mm TS jack
CV DELAY : unipolar, range of 0 to +5 volt
CV DELAY connector: 6.3 mm TS jack
CV VOICES: unipolar, range of 0 to +5 volt
CV VOICES connector: 6.3 mm TS jack
Power supply: stabilised, +12 V, 0.2 A, centre positive
Power Consumption: 2 watt
Dimensions: 266 x 266 x 62 mm
Weight (without power supply and packaging): 2.5 kg

Notes: Billing yourself as the most inspiring and versatile sequencer ever made is a bold claim. OXI might just have managed it with this peach of a device, packed full of creative ways to program and perform.

Supplier's Notes:
Oxi One, the new wave of sequencing

A new and inspiring way to create musical ideas and control all your studio gearThis instrument has been created with the principles of ease, power, expressiveness and robustness in mind. Our aim is to get rid of most drawbacks that are present on many today's sequencers. Consequently, all the features of OXI ONE are easily accessible in a blink of an eye.

Unleash your creativity with all the included performing features, randomization options, and sequence editing capabilities.

All in (Oxi) one

4 fully configurable sequencers - performative keyboard layouts
8 LFOs - 4 loopers - 4 arpeggiators - 8 fully routable CVs - 32 CC's recording
Tonnes of randomization options - euclidean & pattern generator - arranger mode
4 modes available per sequencer

Multi

8 tracks with totally independent parameters: start-end steps, length, division, etc. Configurable MIDI outputs and scale note filtering.
Did you miss having more tracks?, Now you can unlock up to 32 tracks in the OXI ONE.

Chord

Innovative chord function generator for easy creation of chord progressions.
Amazing palette of chords types and voicings which perfectly matches to each other. It comes with a handful of dedicated chord menus.

Poly

Total freedom with up to 7 voices, 4 CC's and plenty of parameters per step.
Forget your DAW piano roll for a moment and enjoy this new creative editing experience.

Mono

Full control of a monophonic track with complete visualization of the melody. Never get lost again in a pattern!

Oxi One gives you plenty of tools

From the creation of musical ideas to live sequencing and performing
Full connectivity & battery powered
Use it as composition tool with your favourite DAW
Take control of your Modular rig: 8 CVs and 8 Gates fully configurable, 1 modulation CV input
Bluetooth to unlock wireless power. Control awesome apps in your tablet, smartphone or any other BLE MIDI device like wearables.
MIDI routing from/to USB, TRS, BLE and CVs.
5 Sync modes and dedicated Clock I/O
Play big and easy
Store up to 15 projects with up to 16 patterns for all the sequencers
Live arranger with song view let's you arrange and chain patterns visually
Performing keyboard with arpeggiator and chord triggering
UNDO function to the rescue
128 steps per sequencer
Solid and compact build
Compact dimensions: 36 x 14 cm
Only 1.5 cm thick
Premium anodized aluminium case and knobs
Bright OLED display
USB C port
Intelligent pattern randomizer
Get instant musical results with a fully controllable randomizer.

Humanization

Variation control
Density control
Scale and root randomization

Random perform

On the go global track randomization:

Velocity randomization
Octave randomization
Triggering probability
Retriggering (ratchets) randomization

Tools

Handy tools you always missed at your disposal:

Instant loop function

Extend, zoom, duplicate and move your patterns in all directions
Two LFO per sequencer with assignable destination
Up to 32 CC's recording automation (per step)
Configure all LFO and CVs parameters and options from their respective menus

Deep & instant control of your modular rack

With 8 CX, 8 gates, clock out and clock/VC in and all of them highly configurable
With 8 configurable and assignable CV outputs and 8 gates, including VCA ready dynamic envelopes, glide, vibrato, LFOs and modulation outputs, you have plenty of possibilities for your Modular system.
The grid adds another layer of performance: turn on/off and change cv sources in real time.
With "trig envelopes" MIDI and CV goes hand in hand. Triggered envelopes are AD envelopes with velocity as amplitude and gate as decay time, the attack can be modulated by any of the modulation lanes. They can be used as dynamic modulation source for VCA/LPGs.
MIDI (trs, usb, bluetooth) to cv and vice versa.
LFO and MOD has offset and inversion controls.
With MOD on, you can record the movement of the encoders to create looping modulation.

Sequencer: Select which sequencer affects the corresponding output and easily turn on/off the output.

Modulation:
- Select the source of modulation and voice for any output.
- Select the voice (1-8) on Poly, Chord and Multitrack.

Music theory at your fingertips

New at music theory or looking for expanding your harmonic palette?

The innovative Chord Mode allows you to easily create chord progressions with plenty of chord types, voicing, spread and bass options. All of which are housed within intuitive chord menus. The chords can be easily arpeggiated with the built in chord arpeggiator. With 150+ chord variations!

With Harmonic Mode you can sequence other instruments to harmonically play with your chord progressions.

Oxi could make an entire product only around these features but you can enjoy them integrated with other awesome tools.

Specifications

Up to 128 steps per Sequencer
4 deeply configurable and independent Sequencers active at the same time (up to 32 tracks)
4 modes to choose from per Sequencer: Monophonic, Polyphonic, Chord, Multitrack (up to 8 independent tracks) more to come
Load Patterns and Projects instantly, no load time
CVs and Gate outputs are user assignable with a dedicated grid layout that allows changes in real time
CV outs support for ADs envelopes, Polyphony, Modulation and LFOs
Arranger mode with 4 pattern playback lanes, count down visualization and Program Changes
One LFO per Sequencer with assignable destination. CV In can act as an assignable modulator.
Live MIDI looper with Rec activation by MIDI in and Rec Extend options
USB MIDI, TRS MIDI, BLUETOOTH (BLE) MIDI routable to the CVs and gates outputs
Clock out and clock/cv in (which serves as parameter modulation by pulse frequency)
Intelligent and musical pattern Randomizer (with humanization and controllable randomization)
Innovative chord function, with hotkeys for voicing, inversion and spread
Euclidean generator
Playback and perform randomizer (velocity, octave, trigger, ratcheting and skipping independently)
Keyboard mode per Sequencer with arpeggiators independent of the sequence (10 modes, octavation, gate, rate and hold functions) and chord triggering
Internal clock or external sync (USB MIDI, TRS MIDI, BLUETOOTH MIDI and clock IN)
Preview function
Per step parameters: pitch, velocity, octave, gate, 4x modulation lanes, glide (for cvs outs in mono mode), ratches, micro time offset, probability; strum, voicing and chord type (Chord Mode)
Plenty available scales and user selectable root note
Open Source app (MacOS, Linux, Windows, iOS and Android) for further configuration and Project backup (under development)
1/32th to 1bar resolution per step
Extend function
Loop function
Selectable Init and End steps (Independent for each track and Sequencer)
Selectable MIDI output channels (Independent for each track and Sequencer)
Swing per Sequencer
Playback directions: forward, backward, alternate, random.
Multiple pattern edition features like duplicate, moving patterns in all directions (rotate and transpose)
Copy, paste, clear features for patterns, parts, sequences, steps and presets
Several Undo steps
Up to 15 Projects which include Project configuration and up to 64 Patterns per Project and 16 songs. Pattern exporting possible via the companion app

Notes: A typically unique take on multi-effects from Soma, designed to induce meditative states. Hybrid analogue-digital delay/reverb/granular processing gives a range of creative approaches.

Supplier's Notes:
COSMOS is a drifting memory station designed to work with meditative states through music. The design of the controls, functions and generated soundscapes are intended to evoke, in both performer and listener, states and experiences inherent in meditation, such as limitless space, fluidity, spontaneous development, presence, the ability to hear, tranquility, the experience of subtle harmony and happiness enveloping the whole world.

From a functional point of view, COSMOS is a large array of sound memory, in which recorded sounds undergo constant recombinations, spontaneously generating an ever-changing soundscape. This is achieved in three ways - by a mathematical shift based on the relationships between large prime numbers (the size of all delay lines are different primes), an asynchronous operation of the LFO, and modulation with a slowly changing chaotic signal. As a result, it allows the endless layering and processing of various sounds, as in a looper, but without an intrusive, repetitive loop.

COSMOS generates rich, fluid and evolving soundscapes perfect for ambient music. Using COSMOS, you can play an entire meditative solo concert while being in a spontaneous flow and without using studio-prepared sequences, backing tracks and other things that can't be a reflection of the "here and now".

Specifications

Minimum input voltage: 0.35 V peak-to-peak
Maximum output voltage at line outputs: 11.3 V peak-to-peak
The maximum output voltage at the headphones output: 10.4 V peak-to-peak
Frequency response: 10-22000 Hz
Sound memory: 44.7 sec
Supply voltage: 12 V *
Power connector polarity: centre plus
Current consumption: 0.25 A
Dimensions: 342 x 153 x 68 mm
Weight: 2.2 kg

* Use only the power supply supplied with the device! In case of failure, it can be replaced with a high-quality modern switched-mode power supply with an output voltage of DC 12 volts, the center is plus and an output current of at least 0.5 amperes (more is fine). The power supply must have a wide AC input voltage range of 100-240 volts. Such power supplies have excellent output voltage stabilization required for the device. It is forbidden to use COSMOS with nonstabilized voltage from transformer power supplies. It can lead to damage to the device, which is not covered by the warranty repair!

Notes: A real powerhouse of a sequencer, featuring eight tracks each with six different modes. MIDI and CV/gate outputs allow you to control pretty much any instrument, including modular gear.

Supplier's Notes:
Portable hybrid multiengine

A new inspiring way to create musical ideas and control all your studio gear

6 modes available per sequencer

Multitrack

8 tracks with totally independent parameters: start-end points, length, speed, etc. Configurable MIDI outputs and scale note filtering. Did you miss having more tracks? Now you can unlock up to 32 tracks in the OXI ONE.

Chord
Innovative chord function generator for easy creation of chord progressions.
Inspiring palette of chords with plenty of types and voicings that perfectly matches to each other. It comes with a handful of dedicated chord menus.

Poly
Total freedom with up to 7 voices, 4 CC's and plenty of parameters per step.
Forget your DAW piano roll for a moment and enjoy this new creative editing experience with unique features like per note chance or logic conditions.

Mono
Full control of a monophonic track with complete visualization of the melody.

Stochastic
Create the perfect recipe for an endless generative idea or melody.

Matriceal (new)
Forget everything you know about sequencing. A step further in generative improvisation.

All this in a compact and premium package

Take full control of your studio gear

USB Host

Connect and Power USB MIDI keyboards and controllers

BLE Central and Peripheral
Battery powered (Up to 8 hours)
BLE to CV, BLE to MIDI, BLE to MIDI USB and vice versa

Deep & instant command of your modular rack

With 8 cv, 8 gates, clock out and clock/cv in and all of them highly configurable

OXI ONE includes VCA ready dynamic envelopes, glide, vibrato, LFOs and
modulation outputs, you have plenty of possibilities for your Modular system.

The grid adds another layer of performance: turn on/off and change cv sources in real time
With "trig envelopes" MIDI and CV goes hand in hand
Triggered envelopes are AD envelopes with velocity as amplitude and
gate as decay time, the attack can be modulated by any of the modulation lanes (new)
Envelopes can be used as dynamic modulation source for VCA/LPGs
MIDI (TRS, USB, Bluetooth) to cv and vice versa
With MOD on, you can record the movement of the encoders to create looping modulation or draw automations directly in the grid
Sequencer: Select which sequencer affects the corresponding output and easily turn on/off the output
Modulation: assign any cv to output any internal modulation

Plenty of tools
From the creation of musical ideas to live sequencing and performing
OXI ONE gives you all the power
Full connectivity & battery powered
Use it as composition tool with your favourite DAW.

Bluetooth to unlock wireless power. Control awesome apps in your tablet, smartphone or any other BLE MIDI device.

Power and connect USB MIDI devices thanks to the USB Host capabilities.

MIDI routing from/to USB, TRS, BLE and CVs.

Up to 8 hours of battery life.

Play big & easy
Store up to 15 projects with up to 64 patterns for all the sequencers.

Live arranger with song view let's you arrange and chain patterns visually.

Performing keyboard with arpeggiator and advanced chord triggering.

UNDO function to the rescue.

128 steps per sequencer.

Solid & compact build
Compact dimensions: 36 x 14 cm.

Only 1.5 cm thick.

Premium anodized aluminium case and knobs.

Bright OLED display.

USB C port.

Algorithmic pattern generator
Get instant musical results with a fully controllable generator

Euclidean rhythms

Drum pattern generator based on MI Grids (new)

Random perform
On the go non destructive randomizer:
Velocity, Octave, Trigger, Retrigger (ratchets), Time division and more

Handy tools you always missed at your disposal:

Two LFOs per sequencer with assignable internal and external destinations (new)
Up to 32 Modulation Lanes
independent length and speed (new)
routable to external and internal parameters (new)
routable to any CV output
Routing to all possible internal parameters, CC's and other MIDI messages.
Loop function
Extend, zoom, duplicate and move your patterns in all directions

Specifications

5V DC 1.7A (USB type C supply)
Li-Po Battery 2200mAh
Radio equipment:
Bluetooth 5.0, 2.4GHz, Tx Max: 4 dBm
Mechanical specifications:
Aluminum chassis & Silicone buttons
Dimensions: 36 x 13 x 3 cm
Weight: 890 gr.
Operating temperature:
10 OC to 36 OC

Inputs and outputs

USB C for 5V power supply and MIDI USB. It also charges the internal Li battery
MIDI TRS input and output (Din adapter included). MIDI Out is 5V, MIDI IN accepts both 5V and 3.3V
MIDI Bluetooth BLE 5.0 bidirectional, peripheral and central roles.
CVS (1 t 8) outputs: from -3V to 8V
GATE (1 to 8) outputs: 5V or 10V configurable
Clock Out and Clock/CV In (can be independent with a splitter)

Accessories

Included in the package
USB C to A cable
MIDI DIN to TRS adapter (Black color) Type A

Not included

TRS to DIN5 Clock adaptor (Grey color):
Exposes One's Clock and Start-Stop IN and OUT to other gear's DIN SYNC ports
TRS to TR-TR stereo splitter (Pink color or Black and Red):
Splits the Clock and Reset outputs of the OXI One in two mono outputs.
Splits the Clock/Gate IN and Reset/CV IN inputs in two mono inputs.
OXI Split: increases the number of MIDI Outputs available.
OXI Pipe: Eurorack module to break out the CV/Gate outputs.

Notes: A mini-modular synthesizer for real-time composing, sound processing, and having fun.

Pluto is compact and portable, with abilities that belie its small size. Five channels of modulation (named for the five moons of Pluto), two voices, two sequencers, a mini-keyboard, and onboard delay make Pluto its own complete sound environment, but it can happily play with all your other gear.

The design of Pluto draws from a legacy of portable electronic instruments, from the Buchla Music Easel to 80's Casio synthesizers. With a focused, approachable interface, Pluto invites exploration.

Features

Portable 2-voice, 2-sequencer patchable synthesizer
Easily create complex, randomized sequences
Low-aliasing digital oscillators, wavetable oscillators
Rechargeable battery
Built-in delay and reverb effects
Mini touch keyboard
Audio input for audio processing
Audio output (stereo headphone, line)
Quantize to preset scales, MIDI, or even audio input
Eurorack-compatible patch signals (5v)
Sync In & Out
MIDI In & Out (TRS, USB)
2 channels CV Out (0-5v, 1v/oct)
USB-C cable included

Notes: Keyboard version of Akai's iconic MPC workstation, combining the classic MPC sampling and sequencing approach with 16 pads and a 37-note synth keybed. A superb all-rounder for any production style.

*** Introducing MPC Stems- March 2024 ***

Akai Professional now introduces the next chapter of sampling innovation and production powered by the groundbreaking MPC Stems bringing sampling into a new chapter.

With MPC Stems, you can access the raw building blocks of any sample or vinyl record, isolating the DNA of any record. Producers can now manipulate the Drums, Bass, Music, and Vocals, opening new creative possibilities.

Akai Professional introduces the ultimate creative workflow with Stems Separation seamlessly integrated into the leading MPC series, powered by MPC 2 Desktop Software.

With MPC Stems, producers and beat-makers can now unlock unmatched sampling creativity by easily isolating drums, bass, music, and vocals from any audio, vinyl recording, or sample revolutionizing the art of sampling.
Experience lightning-fast workflow with superior sound quality, keeping you inspired throughout the creative process.

Slice and isolate samples while maintaining chop regions across each of the four stem layers.

Take complete control with direct manipulation of stem layers from the pads, adjusting volume, pitch, pan, start, and end points with instant responsiveness.

MPC Stems requires MPC 2 Desktop Software running 2.14 or higher, compatible with MPC Live, MPC Live 2, MPC One, MPC One +, MPC X, MPC XSE, MPC Key 37, MPC Key 61, MPC Studio Mk 2 in Controller Mode.


Supplier's Notes:
Introducing the Akai Professional MPC Key 37; a standalone keyboard workstation that has everything you need to produce music out of the box. The iconic MPC range has been the centrepiece of beatmakers' and producers' studios for over three decades, evolving into a production platform that combines sampling, sequencing and synthesis into a lightning-fast workflow that keeps you focused on your music. MPC Key 37 brings together the familiar 16 pad grid together with a synth-styled 37 note keybed; along with legendary MPC sounds and instruments, and all the connectivity you need to integrate with your outboard gear and computer - in a compact footprint.

Sound

MPC Key 37 ships with a core collection of sounds and samples from Akai MPC's industry standard plug-ins.

There are 8 plug-in instruments out of the box: including Hype, Odyssey, Mellotron and more; and over 10GB of production ready samples and drum kits. Together these offer over 1000 production-ready presets and if you want to dive deeper each plug-in instrument features advanced synthesis, deep parameter editing, and effects for programming in the exact sound you need. With 32GB of internal storage (plus removable media via SD Card and USB) there is enough space to expand your sample and instrument library in whatever direction you need to take it.

Effects

MPC Key 37 includes over 100 powerful studio-quality effects for creative production and mixing.

Insert lush Reverb & Delay effects into your tracks, add bounce and punch to your drums and mix using modern or vintage style compressors and limiters. MPC Key 37 also ships with cutting edge vocal FX plugins which can also be used for straight vocals or creative sound design.

Control surface

The MPC Key 37 features a synth action key-bed with aftertouch, alongside separate pitch and modulation wheels. The synth-style keyboard action has been designed with players and producers in mind; whether tracking basslines into your productions or jamming out synth leads on stage. The 16-velocity sensitive RGB pads are the same award-winning pads as the MPC One+, along with the renowned Time Correct, Swing, and Quantize features of MPC that continue to inspire producers at the top of the industry. Tweaking and editing take place on the 7' multi-touch display and 5 Q-link rotary encoders, giving you fine control as well as quick access to the parameters you need at your fingertips.

Connectivity

MPC Key 37 can also act as a hub for your outboard gear: Connect MIDI devices via USB or using the MIDI DIN In/Out ports; and integrate with modular rigs with the 8 CV/Gate outs. Onboard WiFi/Bluetooth allows for wireless synchronization with Ableton Link and MPC OS Updates, and the SD Card Reader allows for volumes of expandable sounds and tracks.

DAW Integration

MPC Key 37 features a built in 2-in 2-out USB audio/MIDI interface, so you can record audio and MIDI directly in and out of your computer. The included MPC software is a standalone DAW on your Mac or PC, so you get all the tactility and control of the hardware, but with as many tracks as your computer can handle. MPC software also comes as a VST/AU plug-in so you can open it in major DAWs such as FL Studio, Logic, Ableton, Pro Tools, Studio One and more, and combine your favourite workflows.

Notes: Dark grey version of the 8030C, part of Genelec's iconic range of compact monitors. Max SPL of 104 dB and frequency response of 47 Hz - 25 kHz mean that the 8030Cs pack a bigger punch than their 30 x 19 cm dimensions would suggest.

Supplier's Notes:
If you love the compact format of the 8010 and 8020 models but demand higher SPL and more bass extension, meet the 8030C.

Welcome to the sweet spot

Short term max SPL: >104 dB

Maximum short term sine wave acoustic output on axis in half space, averaged from 100 Hz to 3 kHz at 1 m.

Long term max SPL: >96 dB

Maximum long term RMS acoustic output in same conditions with IEC weighted noise (limited by driver unit protection circuit) at 1 m.

Self-generated noise: <5 dB SPL

Self generated noise level in free field at 1 m on axis (A-weighted).

Weight: 5 kg (11.0 lb)

Dimensions

Height: 285 mm (11 1/4 in)
Height with Iso-Pod: 299 mm (11 3/4 in)
Width: 189 mm (7 1/2 in)
Depth: 178 mm (7 in)

Enclosure

Enclosure material: Die cast aluminium
Enclosure type: Reflex port

Drivers

Bass

Driver type: Cone
Diameter: 130 mm (5 1/8 in)

Treble

Driver type: Metal dome
Diameter: 19 mm (3/4 in)
Harmonic distortion

50-100 Hz <2 %
> 100 Hz <0.5 %

Amplifiers

8030C bass amplifier: 50 W Class D
8030C treble amplifier: 50 W Class D

Mains voltage: 100-240 VAC 50/60Hz

Power consumption

ISS Active: <0.5 W
Idle@ <3 W
Full output: 60 W

Signal processing section

Connectors

Input: Analogue signal input connector XLR female, balanced 10 kOhm.

Crossover

Bass/Treble: 3000 Hz

Notes: Meris describe the MercuryX as the most flexible studio reverb pedal ever made. A bold claim, but hear them out. Immense power with eight custom algorithms in a modular architecture. Full stereo with a wealth of programs from lush plates and twangy springs to experimental weirdness.

Supplier's Notes:
The Meris MercuryX takes the heart and soul of Mercury7 and expands it far beyond sci-fi into the highest quality and most flexible studio reverb ever created in a pedal format. Its modular reverb system format breaks the paradigm of pre-set reverb types and inspires new discoveries. MercuryX features the same easy to use UI as LVX, making it immediately intuitive to navigate.

All of Meris' passion for pro audio has made it into both the algorithms and hardware performance of this pedal. MercuryX combines 8 custom Meris reverb algorithms and incorporates those into a modular system architecture that first introduced with the award winning LVX pedal. It features discrete processing elements and control signal modifiers that can be connected as desired for infinite flexibility in crafting custom reverbs.

Here is a deep dive into the 8 different reverb structures in MercuryX. Each Reverb Structure has Gate controls that can be used to dial in a range of gated reverb effects including the classic percussive gate sound, reverse tail reverb sounds, and slow breathing textures.

Similar to the Dry Blend control of the Predelay, each Reverb Structure features a Predelay Blend control that allows you to put some or all of the predelay reflections in parallel with the reverb tank.

Ultraplate - Adapted from Mercury7, Ultraplate is an inspiring and lush plate with a fast build. Use the Ultraplate's flexible decay range to create a wide range of studio textures.

Cathedra - Adapted from Mercury7, Cathedra is a massive and ethereal algorithm with a slow build. Cathedra is perfect for scifi textures and recreating C-beams glittering in the dark near the Tannhauser gate.

Spring - A flexible algorithm that can be voiced to replicate both the amp based reverb sounds and the classic studio spring tanks featured on early recordings.

78 Room - A lively and direct sound. This algorithm is great for transforming static sounding virtual amps into the difficult to capture sound of a great amp live in the room with you. The Room algorithm features a unique infinite mode (Maxed out Decay controls) that interacts with the Tank Mod to provide deep chorused and flanged reflections.

78 Plate - Fast and dense, the 78 Plate algorithm is a good match for beefing up percussion and vocals.

78 Hall - A large hall with a medium build up of reflections. Great for building up ambient walls of sound. The Hall algorithm's extended reflections are a great base for sculpting with the Bass/Mids/Cross controls. Deep rumbling bass caverns and ethereal upper mid emphasized halos of sound are easy to create. Explore the additional sparse mode for the Hall when Diffusion is set Low.

Prism - The Prism Strucure is an dual tank that allows you to build your own geometric rooms by specificying the size and distance and reflectivity. Prism features a highly configurable modulation section which allows different modulation phases per side to further increase the stereo image.

Gravity - The Gravity Structure works by accelerating indivual windows of your signal and stretching them across the horizon.

Notes: Exceptionally versatile four-channel rotary mixer at a very reasonable price. Twelve inputs, three-band EQ, assignable multi-mode filter, isolator and assignable crossfader. Ultra flexible.

Supplier's Notes:
Omnitronic TRM-422: the rotary mixer on a new level

The desired child- Omnitronic's popular TRM series has been expanded: the TRM-422 combines all the proven features of the previous models, but additionally offers functions that numerous fans had wished for. During the development of the mixer, the focus was on the demands and suggestions of the community.

Full control- Each of the 4 input channels has 2 line inputs, one of which can become a phono input at the touch of a button. The channels are each equipped with a volume as well as a gain control. In addition to the master isolator (bass, mid & high), the DJ has the option to activate a filter with HPF, BPF, LPF, resonance and sweep controls in each of the 4 input channels.

The master output is available to the DJ in both XLR and RCA versions.

Effect ways- The use of external effect devices is possible through an FX-In and FX-Out via 6.3 mm jack. The mixer's master insert is also equipped with a send & return (unbalanced) path. This allows additional external effects to be looped into the mixer.

DVS integration- The mixer's timecode outputs allow easy integration of a DVS system (Digital Vinyl System) such as Traktor or Serato.

Monitor section- The booth output of the TRM-422 is provided with one XLR and one RCA connector. The signal of the booth output can be easily adjusted to the conditions in the DJ booth with the help of an EQ (High & Low).

Microphone inputs- The TRM-422 offers 2 microphone inputs. The first mic input gives the DJ the ability to modify the mic signal with EQ (high & low).

Backup source- With the help of the AUX input on the front panel, players such as smartphones, tablets or MP3 players can easily be connected via mini-jack (3.5 mm) and thus serve as a backup solution.

Activatable crossfader- If you don't want to do without a crossfader during your DJ set, you have the option to assign each of the 4 channels to the integrated crossfader. If the crossfader is not used, it can easily be switched off.

Set recording- The RCA record-out makes it easy to record your own DJ set.

Technical specifications

Power supply: 100-240 V AC, 50/60 Hz
Power consumption: 24 W
Protection class: Class I
Power connection: Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided)
Frequency range: Microphone 20 - 20000 Hz, Line 20 - 20000 Hz, Phono 40 - 18000 Hz
S/N ratio: >97,2 dB line, >91,7 dB Microphone
THD: Line <0,04 % at 1 kHz, Phono <0,13 % at 1 kHz, Microphone <0,008 % at 1 kHz
Gain: Microphone 44 dB, Line -16,5 dB to +8,5 dB Phono -48,5 dB to +23,5 dB
Isolators: Master Gain:- ? bis +9, Low/mid 300 Hz, 18db/oct , Butterworth, Mid/high 4000 Hz, 18db/oct , Butterworth
Crosstalk: >-68 dB
Control elements: Power switch, source selector, Crossfader, Crossfader selector switch, Crossfade curve switch; Cue mix split function, EQ controls

Connections
Input: 4 x line via stereo RCA
Input: 4 x line/phono via stereo RCA
Input: 2 x Microphone via 3-pin XLR
Output: 1 x headphones via 6.3 mm jack socket (stereo) mounting version
Output: 1 x headphones via 3.5 mm jack (stereo) mounting version
Output: 1 x rec. via stereo RCA
Output: 2 x booth via 3-pin XLR
Output: 1 x booth via stereo RCA
Output: 2 x master via 3-pin XLR
Output: 1 x master via stereo RCA
Output: 1 x AUX sends via 6.3 mm jack socket (stereo) mounting version
Output: 1 x AUX returns via 6.3 mm jack socket (stereo) mounting version

Channels:
Input chanel: 4 x stereo with Line-Line/Phono switch via RCA, channel control via Rotary, 3-band tone control EQ, source selector, gain control, CUE switch, FX routing switch, Crossfader selector switch,
Microphon chanal: 2 x mono via XLR, channel control via Rotary dial, ON AIR switch

Master output: 2 x stereo via XLR, channel control via Rotary
Booth output: 2 x stereo via XLR, channel control via Rotary
Rec. output: 1 x stereo via RCA
Headphones output: 1 x stereo via Plug 6,3mm/3,5mm (Jack), channel control via Rotary dial, Cue mix split function,
Max. level: Output: +18 dBu
Material: Metal
Housing design: Desktop console housing
Dimensions: Width: 41 cm, Depth: 28,5 cm, Height: 10,5 cm
Weight: 5,74 kg

Notes: The Quandrantid Swarm is a digital synthesizer that features a percussive element to give it a unique sound. It contains a two-pole analogue filter, an LFO with eight waveforms, and a spring reverb. The eight touch keys can be used as a mono keyboard, polyphonic keyboard or an eight-step sequencer. The Quandrantid Swarm has MIDI and CV/Trig connectivity. Its normalized pre-patching allows you start creating immediately, but its semi-modular design allows you to use patch cables to explore the potential of this instrument.

Eowave Quandrantid Swarm Features:

Triangle wave OSC with spread fold
Percussion element with frequency
Two pole filter, filter one high/low pass 12db, filter two low pass 12db
AD envelope
One LFO with eight waveforms
Slew limiter
Spring reverb
Eight touch keys with Three modes - mono, poly and sequencer
MIDI in, CV/Trig in, Clock in/Reset in to communicate with other devices
VCA

Notes: Latest version of an interface that's become a modern classic. Up to 18 audio inputs and 22 outputs in total, spread over a mixture of analogue and digital connections. A true all-rounder that's hard to beat.

Supplier's Notes:
The MOTU UltraLite-mk5 is the latest incarnation of the best-selling UltraLite series (replacing the UltraLite-mk4). It takes the winning formula of the half-rack form factor with 18 in x 22 out analog and digital I/O and adds state-of-the-art enhancements at the same great price :

Best-in-class Audio Quality - the UltraLite-mk5 includes renowned ESS Sabre32 DAC technology, featuring the ES9026PRO DAC, to deliver 125dB dynamic range and -114 dB THD+N.

Ultra-low Latency - optimised Drivers for both Mac and PC deliver ultra-low latency performance. With a high-performance DAW the UltraLite-mk5 delivers an astonishing round-trip latency of 2.4ms (at 96kHz with a 32-sample host buffer

New Design - while retaining the same front and back panel layout as its predecessors the UltraLite-mk5 has a sleek new look, incorporating a high-resolution, high-contrast white OLED display providing precision metering for all analog inputs and outputs, along with digital I/O activity indicators and status info

Connectivity and Compatibility- the UltraLite-mk5 has a USB-C connector and is also class-compliant for operation with iOS devices. It is also compatible with MacOS 11 Big Sur and M1 Macs

New Software and Simplified Monitoring - live monitoring of inputs is controlled via the new CueMix 5 software

Rack-mount options - a half-rack mounting kit (sold separately) allows the steel-encased UltraLite-mk5 to be rack-mounted with thick steel brackets to withstand the punishment of touring. Alternatively, two UltraLite-mk5 units can be joined together with a Half-rack Coupler Kit (sold separately)

Technical Specifications:

Sample rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz
Mic/line/guitar inputs: 2 x XLR/TRS "combo" jacks, 1 MO impedance on the line/instr inputs
Analog inputs: 6 x 1/4" TRS line in (balanced)
Analog outputs: 10 x 1/4" TRS line out (balanced, DC coupled)

Digital I/O:
1 bank (8 ch) of ADAT optical at 1x sample rates
1 bank (4 ch) of SMUX optical at 2x sample rates
Switchable to stereo TOSLink (optical S/PDIF)
1 x stereo S/PDIF on RCA (up to 96 kHz)

Computer I/O:
1 x USB-C 2.0 audio class compliant
Compatible with USB Type A (with adapter or C-to-A cable)

Total audio I/O:
18 in / 22 out (40 total) at 1x sample rates
14 in / 18 out (32 total) at 2x sample rates
8 in / 12 out (20 total) at 4x sample rates

MIDI I/O:
1 x MIDI IN
1 x MIDI OUT
16 MIDI channels to/from computer host

Headphone: 1 x 1/4" TRS stereo phone
Phantom power: 2 x individual +48V

Front panel:
2 x XLR/TRS combo inputs
1 x 1/4" TRS headphone output
1 x potentiometer - phone/monitor vol
2 x potentiometer - mic/instr input gain
4 x switches - (2) 48V and (2) pad
1x high-resolution white OLED display for metering/status
Power: External 12-18V DC power supply - 1.0A max - tip pos or neg

Dimensions and weight: (width x depth x height, enclosure only)
8.6 x 6.9 x 1.75 inches
22 x 17.5 x 4.5 cm
2.875 lbs / 1.31 kg

Notes: A whooooole lot of synth power for the money, building on the original Minilogue's analogue platform with a load of added digital features. Hard to think of many more versatile synth modules.

Supplier notes:
Minilogue XD module is the new desktop module version of Minilogue XD, the four-voice polyphonic analogue synthesiser with a customizable digital multi-engine and built-in stereo digital effects.

The desktop module is equipped with the same controllers as the keyboard version, making it a great choice not only as an additional sound module for your keyboard or DAW but also providing excellent performability, giving you an easy way to include an analogue polyphonic synth in your setup. It's also equipped with a poly-chain function that lets you connect it with another Minilogue XD or Minilogue XD module so that the two units can operate as a polysynth with a total of up to eight voices in your studio or on stage.

Add the sounds of the Minilogue XD to your setup or system!

Equipped with an analogue synthesiser circuit and a digital multi-engine:

Voice structure of Minilogue XD is 2VCO + MULTI ENGINE, 1VCF, 2EG, 1VCA, and 1LFO. In addition to the distinctive circuits found in the series, such as wave shaping to shape the overtones of the oscillator and a sync/ring switch, there's also cross modulation, a two-pole filter that can be both sharp and fat, and a drive switch that adds thickness and drives signal into Minilogue XD's filter. Every parameter has been tuned in detail based on what musicians want out of their synth. The sounds range from the warm pads typical of analogue to fat basses and crisp lead sounds, covering every situation.

The additional sound design possibilities of digital sound are delivered by the multi-engine: the third oscillator in addition to the two analogue VCOs. This engine, which is equipped with three different types of sound generator (noise, VPM, and open-source user oscillators) lets you take advantage of a sonic character that's different than analogue, and use it at the same time as the analogue engine, infinitely expanding XD module's potential through hybrid sound design.

High-quality digital effects:

Minilogue XD's high-quality digital effects use 32-bit floating point DSP processing, adding a finishing touch to its deep sound design platform. The three types (modulation effects, reverb, and delay) can be used simultaneously, letting you choose from a wide range of variations including chorus, ensemble, warm tape delay, and a diverse variety of reverb. The user effect slots allow you to load your own effect programs that you've created.

User customization brings out infinite potential:

The Minilogue XD features a customizable open-source environment. The unit comes with 16 user oscillator slots and 16 user effect slots that you can customize. Oscillators and user programs that you've created with the SDK (Software Development Kit) can be loaded into the Minilogue XD via the dedicated librarian software, as well as oscillators other users share online.

What sounds can you create using the fusion of expanded digital oscillators with analogue synthesis? Create original programs, share code, and participate in the user community. KORG even provides sample code to get you started.

Polyphonic Step Sequencer:

One of the major features of the Minilogue XD series is its 16-step step sequencer. Each of the factory-preset programs has an embedded sequence pattern created with performance in mind.

The step sequencer provides 16 steps, and supports both realtime recording and step recording. You can use the 16 step buttons to select a step directly, allowing quick editing to replace the pitch of a step or to mute it, or even improvisatory performances. Motion sequence lets you record the movements of up to four knobs, adding time-varying change to the sound, and you can record not only smooth changes in value but also values that change precisely at each step. You can use this to have different parameter values at each step; for example, you might create a drum pattern or sound effect from just a single program. This allows countless ideas to be unleashed.

Poly chain support:

The Minilogue XD module can be used in conjunction with another unit in the Minilogue XD series for poly assignment settings. Specify one unit as the master and the other as the slave, and they will play as an eight-voice polyphonic synthesiser. This supports a variety of uses, such as a voice-expansion module for the Minilogue XD or as a sound module for a DAW-based production system.

Free bundle of music software:

The Minilogue XD module comes with a diverse variety of music software from Izotope including "Ozone Elements" which lets you not only create songs but also master them using AI, "Skoove" which will help you improve your keyboard playing skills, "Reason Lite" DAW software, as well as software synths from KORG and other brands.

Notes: A premium option from Hercules, the Inpulse T7 is a Serato-compatible controller with motorised platters for 7-inch vinyl. Two-channel design with Serato DJ Lite and Djuced software included.

Supplier's Notes:
Are you an aspiring DJ who wants to start spinning on vinyl? The Hercules DJControl Inpulse T7 is the perfect motorized DJ controller to help you take your first steps towards mastering the art of vinyl turntables! This modern take on a classic tool combines the genuine feeling of real vinyl discs with the benefits of digital technology. With 2 motorized platters for 7" discs that go from 0 to 33? RPM in just a tenth of a second, you can practice DJing on vinyl and experience the authentic feeling of real turntables. The separate vinyl record, slipmat, and platter even allow you to remove the vinyl record, giving you full control of your performance.

Serato

DJControl Inpulse T7 includes the Serato DJ Lite software and all of its features. It's compatible with Serato DJ Pro, so that you can enjoy the maximum number of features.

Beatmatch Guide

The Inpulse T7 features the same built-in beatmatch guides as the rest of Hercules' award-winning DJControl Inpulse line to assist DJs in the art of spinning on motorized platters.

Elevate your controller

DJControl Inpulse T7 is 3.5" / 9 cm tall with its feet extended. Elevate your mixing: run wires underneath and protect the controller from spilled drinks.

Experience the sensation of turntables

DJs can mix, beatmatch or scratch on standard-sized 7" platters that go from 0 to 33? RPM in just a tenth of a second. They can also separate the authentic vinyl discs and felt slipmats from the metal platters for a genuine turntable feeling.

Built-in audio

-2 pairs of Master outputs (speakers): 2 x XLR + 2 x RCA
-2 headphones outputs: 14" / 6.35 mm stereo jack + 1/8" / 3.5 mm stereo mini-jack
-Microphone input: 14" / 6.35 mm jack (balanced)
-Audio resolution: 44.1 kHz / 24-bit

Motorised platters

-33 1/3 RPM motorized metal platters (can switch to 45 RPM in Serato DJ Pro)
-Felt slipmats and vinyl records are held in place by the central axis

Controls

-Per deck: 1 filter knob, 3 EQ knobs, 1 gain knob, 1 volume fader, 1 VU meter

-General:

1 crossfader, master volume knob, microphone volume knob, headphones volume knob, Cue to Mix knob, Master VU meter
Effects rack: 2 x 3 Fx Select buttons

-2 paddles, 1 control knob, Beat -/+ buttons

-Platter with touch detection, 3.9-inch / 10-cm tempo fader, Play/Pause, Cue, Shift, Sync

-8 pads × 8 modes (Hot Cue, Loop, Stems)

-Browser knob, Assistant, Range, Loop, Loop In/Out, Instrumental/Vocal, Pitch Bend << / >>

What's in the box:

Hercules DJControl Inpulse T7
2 x felt slipmats + 2 x 7-inch / 17.8-cm replica vinyl records
Braided USB cable
Power adapter + removable power cable
Quick start guide and warranty information leaflet
DJUCEDr and Serato DJ Lite licenses

Notes: A typically unique take on multi-effects from Soma, designed to induce meditative states. Hybrid analogue-digital delay/reverb/granular processing gives a range of creative approaches.

Supplier's Notes:
COSMOS is a drifting memory station designed to work with meditative states through music. The design of the controls, functions and generated soundscapes are intended to evoke, in both performer and listener, states and experiences inherent in meditation, such as limitless space, fluidity, spontaneous development, presence, the ability to hear, tranquility, the experience of subtle harmony and happiness enveloping the whole world.

From a functional point of view, COSMOS is a large array of sound memory, in which recorded sounds undergo constant recombinations, spontaneously generating an ever-changing soundscape. This is achieved in three ways - by a mathematical shift based on the relationships between large prime numbers (the size of all delay lines are different primes), an asynchronous operation of the LFO, and modulation with a slowly changing chaotic signal. As a result, it allows the endless layering and processing of various sounds, as in a looper, but without an intrusive, repetitive loop.

COSMOS generates rich, fluid and evolving soundscapes perfect for ambient music. Using COSMOS, you can play an entire meditative solo concert while being in a spontaneous flow and without using studio-prepared sequences, backing tracks and other things that can't be a reflection of the "here and now".

Specifications

Minimum input voltage: 0.35 V peak-to-peak
Maximum output voltage at line outputs: 11.3 V peak-to-peak
The maximum output voltage at the headphones output: 10.4 V peak-to-peak
Frequency response: 10-22000 Hz
Sound memory: 44.7 sec
Supply voltage: 12 V *
Power connector polarity: centre plus
Current consumption: 0.25 A
Dimensions: 342 x 153 x 68 mm
Weight: 2.2 kg

* Use only the power supply supplied with the device! In case of failure, it can be replaced with a high-quality modern switched-mode power supply with an output voltage of DC 12 volts, the center is plus and an output current of at least 0.5 amperes (more is fine). The power supply must have a wide AC input voltage range of 100-240 volts. Such power supplies have excellent output voltage stabilization required for the device. It is forbidden to use COSMOS with nonstabilized voltage from transformer power supplies. It can lead to damage to the device, which is not covered by the warranty repair!

Notes: Based on a new digital hardware platform, the Spectraphon is a powerhouse spectral oscillator, capable of everything from analogue-style dual complex oscillators to FM and much more.

Supplier's Notes:
The Make Noise/Soundhack Spectraphon is a dual Spectral Oscillator coded by Tom Erbe of Soundhack. It uses real-time spectral analysis and resynthesis to create new sounds from those that already exist. It is inspired by classic electronic musical instruments of the past, including spectral processors, additive synthesis, vocoders, and resonators especially the Buchla 296 and Touche, but it takes a physical form more resembling the classic analogue dual complex oscillator in the lineage of the Buchla 259 and the Make Noise DPO.

The Spectraphon is the first module to be built by Make Noise on its new digital hardware platform. This hardware, engineered by Jeff Snyder and Tony Rolando, provides more i/o at higher resolutions, and a lower noise floor than we have ever had access to in a digital module, allowing us to unleash Tom Erbe's DSP code to a previously unattainable degree.

The Spectraphon has two nearly identical sides, A and B, which oscillate in one of two ways: Spectral Amplitude Modulation (SAM), or Spectral Array Oscillation (SAO). In SAM, instead of oscillating at all times like an analogue VCO, sound at the Spectraphon's input is used to modulate the amplitude of a set of harmonics. In SAM the Spectraphon can be sequenced and frequency modulated like any VCO. At any time the current spectrum can be used to create an Array for later use in SAO mode where the Spectraphon oscillates at all times, with the spectrum at the Odd and Even harmonic outputs being drawn from those stored Arrays.

The Slide and Focus controls are mode-dependent: in SAM, they determine how the Spectraphon responds to sound at the input for Spectral AM, while in SAO, they are used to modulate the Array.

In either mode (SAM or SAO), the Partials control works as a combined amplitude and timbre gate for the Odd and Even harmonic output and the FM Bus will create high definition internal frequency modulation from the opposing side of the Spectraphon. The two sides can also interact via the internal FM Bus, the Follow and Sync modes, and by patching them together.

Width: 34hp

Power:
230mA @ +12V
55mA @ -12V

Module Depth (incl power cable): 36mm

Notes: The Buchla Music Easel Program Manager Card

Store your best sonic memories on the Program Manager Card! The PMC takes full advantage of the program interface, storing up to 48 Easel presets and interfacing with your computer with a class-compliant MIDI connection. The Buchla Program Manager App for Mac and Windows gives you the power to manage banks, create programs, and import and export your presets for sharing.

Evolution of an idea

The program interface's edge card connector was originally designed to let artists create presets by wiring resistors to a circuit board to fix the positions of the sliders and banana connections. Each preset was its own card. Simply swapping cards in the program interface completely changed the sound. This was valuable, if not outright necessary, to musicians who needed to easily recreate patches for performance and create repertoire. The 2013 "iProgram Card" created a vital link between computer and Easel. Now, in 2022, Buchla USA has refreshed and simplified the design, giving it more memory, embed-ability, and making it easier to use.

Virtual Solder Station

While you can still solder up some sounds for all generations of the Easel, the new Program Manager Card provides microcontroller precision and computer convenience. Serving as the digital bridge between your computer's USB port and the 28 pins of the Program Interface, the PMC gives you instant recall and easy access to 48 unique programs that control almost every parameter and patchpoint on the Easel's front panel. Repeatability and repertoire are made instantly available.

Computer Precision

Using the Buchla Program Manager Application in Mac or Windows to design presets gives you even more programming options than the Easel's front panel controls. The unique "Depth" controls for the patch cords put a virtual knob on every cable, allowing gradual and even inverted connection for every patch point. The fine resolution provided by high resolution controls means you can dial in extremely precise values for parameters, in a way not easily achieved by hand. The application serves as an endless extension to the Program Manager, with nearly unlimited space for presets and banks.

Sharing is Fun

Import and Export features make it easy to backup or share your presets and complete banks with other Easel musicians in a simple, small file.

Adventure Awaits

With the optional embed kit, you can install the Program Manager card directly into your easel, replacing the Program Interface connector with the screen and buttons. Embedding the card makes it easier to control and travel with.

What about the iProgram Card?

The Program Manager Card is an updated version of the iProgram Card. With a firmware update that we'll be providing very shortly, you can use the new software with your iProgram Card over a USB connection.

Compatibility

The Program Manager Card is compatible out-of-the-box with the Easel Command 208C and upcoming Music Easel. It can be used with the 2013-2017 Music Easels with a DIY modification to the card's connectors or to the Easel itself.

Getting Started

The Program Manager system is composed of the card itself that installs into your 208 Program Interface, and Mac/Windows software where you design and manage presets.

Notes: Second-generation version of Korg's superb ModWave synth, building on the legacy of the iconic Wavestation with 60-voice polyphony, Kaoss Physics and Motion Sequencing 2.0.

Supplier's Notes:
Modwave is a synthesis powerhouse with distinctive wavetable timbres, Kaoss Physics, and Motion Sequencing 2.0. The new Modwave mkII provides an astonishing 60 voices of polyphony almost double that of the original Modwave. All LFOs have been updated with options for free running, delayed start, and retriggering, and a pre/post switch for reverb sends has been added, alongside new modulation sources, and more.

Modern monster synth

In 1985, Korg introduced the DW-8000 - a synth which combined digital wavetables with rich analogue filters to give users sounds which were impossible to create with analogue oscillators.

Modwave builds on the DW legacy, transforming it into a modern monster synth, featuring incredibly deep wavetable oscillators, gorgeous filters, wildly flexible modulation, unmatched polyphony, comprehensive pattern sequencing, and immediately satisfying hands-on control to deliver unique, powerful, and easily customizable sounds and phrases.

Over 200 factory wavetables each contain up to 64 waveforms. 30+ Modifiers can be used to change their basic character, and 13 Morph Types to process them in real-time. Using the unique, realtime A/B Blend, it's possible to create new hybrids from any two wavetables.

Expanded possibilities

Modwave can be expanded by importing new wavetables using the free Editor/Librarian software. There are many free and commercial wavetable libraries in the standard Serum format, or you can create your own using the free, cross-platform WaveEdit software (available in a custom version for the Modwave). Wavetables can be layered with samples from the built-in, multi-gigabyte PCM library, or import your own 4 GB of samples using the Sample Builder software.

Each Program has two full-featured wavetable oscillators, plus a sub oscillator/noise generator and any of a dozen stereo filter types, including the aggressive MS-20, sweet Polysix, and the newly enhanced Multi Filter. Animate almost any parameter using the massively flexible modulation system, with four triggerable envelopes, five LFOs, dual mod processors and two key-track generators-plus multi-lane Motion Sequencing and Kaoss Physics.

Even with all that synthesis power, playing up to four simultaneous wavetables per voice in a single Program, the Modwave mkII achieves 60-voice polyphony, incredible for a wavetable synth. Layer two Programs together for double the possibilities.

KAOSS in motion

Modwave introduced two unique new tools for creating dynamic motion: Kaoss Physics and Motion Sequencing 2.0. KaossPhysics combines an x/y Kaoss pad with modulatable game physics to create a responsive, interactive controller that is extraordinarily powerful.

Motion Sequencing 2.0 brings the organic, continuously evolving patterns of the Wavestate Wave Sequencing 2.0 into the world of motion sequencing, including multiple lanes and real-time recording to help you create complex and evolving phrases that other step sequencers cannot.

Modwave's evolved wavetable synthesis delivers its own brand of completely unique sounds and a knob-per-function layout that makes customizing those sounds fast and easy. There are hundreds of preset sounds empowered by this new architecture, organised by front-panel category buttons, and all instantly customizable via the four Mod Knobs. Modwave'sdistinctive wavetable timbres start with aggressive basses & leads, and lush ambient pads which will add a new dimension to your tracks. But that is just the beginning.

Those who want to dig deeper will find an endless source of discovery; with the Modwave's unique synth architecture, you'll be finding new things for a long, long time. Save as many of your sounds as you like; there's room for thousands more. You can also load your own samples, import wavetables in standard formats, and create your own wavetables using the free WaveEditsoftware.

KAOSS Physics

Kaoss Physics models a ball rolling on a surface and bouncing off walls. The surface can tilt in any direction, and a bump with variable height/depth and location attracts or repels the ball. Adjustable friction slows the ball's travel, and adjustable time controls the speed of the entire model. All of these characteristics are modulatable, so you can change them in real-time!

Start the ball by flicking a finger on the x/y pad, or launch the ball automatically using another modulation source. You can even directly control the ball by holding your finger on the pad. The position of the ball produces eight modulation signals, which can be used to control any modulation destination: the X and Y locations, the distance from the centre, the angle relative to the X axis, and separate signals for +/- X and +/- Y.

Walls can slow down the ball, as if they were padded, or accelerate the ball, like bumpers in a pinball machine. The walls can also be removed entirely, so that the surface wraps around to the opposite edges like a vintage arcade game.
The modelled environment can create specific modulation effects. For instance, use a centered bump with negative height so that the modulation values always eventually return to 0. Or, position a bump with positive height on a side or a corner, to push modulation values away from that zone.

The result is an interactive controller that amplifies your physical gestures, transforming them into complex musical results.

Motion Sequencing 2.0

Motion Sequencing 2.0 is evolved from the Wavestate's Wave Sequencing 2.0. Timing, Pitch, Shape, and four sets of Step Sequence values are separated into "Lanes," each with their own loop start and loop end, adding a deeper, more customizable level of phrase and modulation recording.

Every time the sequence moves forward, the individual Lanes are combined to create the output. For instance, a step sequence value may be matched with a different duration, pitch, and shape every time that it plays. You can modulate each Lane's loop points separately for every note, using velocity, LFOs, envelopes, Mod Knobs, or other controllers. Each note in a chord can be playing something different!

Lanes can also randomize the step order every time they play. Finally, individual steps can be randomly skipped, with a modulatable probability from 0 to 100%. The result is organic, ever-changing sounds that respond to your control. The dual onboard arpeggiators can interact with Motion Sequences for even more possibilities.

Wavetables

Wavetables are sets of single-cycle digital waveforms, arranged in a specific order. The wavetable's "position" determines which waveform is played. Moving the position with an envelope, LFO, or other modulation source creates subtle or dramatic changes in timbre. Some wavetable systems switch abruptly from one waveform to another; others crossfade smoothly between them. Modwave can do either one.

Modifers

Use over 30 Modifiers to alter the character of any wavetable at load time. For instance, isolate the odd or even harmonics, add weight through anti-aliased quantization or saturation, or revisit the gritty character of old-school wavetable synths with the Vintage 8 & 12 options.

Morph

The 13 Morph Types let you stretch, squeeze, reflect, and otherwise alter the wavetables in real-time, changing their timbre andiwhen modulatedicreating additional motion in the sound. Sync creates classic swept-sync timbres, using only a single oscillator. Three special Morph TypesiFM, AM, and Ring Modimodulate Osc 2 with Osc 1, and the last two even apply to samples.

A/B Blend

Using the unique A/B mode, oscillators can blend any two wavetables with phase-synchronous precisionidifferent from simply layering voicesiopening up a dimension of intermediate waveforms. Add body to otherwise "thin" waveforms, for instance, or a touch of sizzle to a mellow timbre. Even fade between two different "modifier" versions of the same wavetable. A/B Blend can be modulated in real-time, of course.

Or, step outside the box with Korg's unique Multi Filter, which creates modulatable blends of multiple modes simultaneously - now with presets on a front panel knob, for easier exploration of its many possibilities.

An arsenal of effects

Modwave's superb effects deliver production-ready sounds. Each Layer has three dedicated effects, plus a send to the Performance's master reverb, followed by a master parametric EQ. Along with standards such as compressors, EQs, choruses, flangers, phasers, and stereo delays, you'll find distinctive processors such as the Wave Shaper, Talking Modulator, Reverse Delay, Multiband Mod Delay, and Overb (from the OASYS and Kronos), plus modeled effects including VOX guitar amps, VOX wah, multi-head tape echo, and a collection of classic guitar pedals.

Notes: One of the most eagerly anticipated new releases in recent years, the T-1 is a powerful 16-track sequencer with countless features aiming to streamline creativity, from melody generation to Euclidean rhythms.

Supplier's Notes:
Not your average sequencer
A 16 track algorithmic sequencer at the center of your studio. The T-1 offers a generative workflow with focus on immediacy and playful exploration. Whether on stage or in the studio, the T-1 will inspire you with fresh ideas and help you push the boundaries of your music. In short, this is a fundamental rethinking of the sequencer as a modern, fun and inspiring instrument

This machine speaks music
Enter a creative dialogue with T-1, and let its musical algorithms spark your creative process, or bring it on stage to perform your musical ideas live and spice them up with variations created on-the-fly

It's your instrument
The T-1 can be customized to suit your music. In fact, it is many instruments in one: Each of the T-1's 16 tracks can be set up in one of three modes.
Note: Compose rhythms and melodies from scratch with creative musical algorithms, and tweak them to your desire with detailed step editing.
CC: Take absolute control over sound design with 16 CC knobs and add automation via random modulation and step editing
FX: Create real-time midi fx to expand and transform your musical ideas. Connect a midi keyboard for hands on live performance

Connect to everything
The signal flow of any modern studio is a complex web of analog, digital and wireless signals and keeping your instruments connected and in sync can be a drain for your creativity. The T-1 solves this by communicating via MIDI, USB, analog CV and gates, Ableton Link and Wi-Fi connections with all of your gear.

Musical structure in a knob
Sculpt the timing, tonality and overall structure of your music in the same intuitive way you would a parameter on a synthesizer: By the twist of a knob. The T-1 lets you dial in any rhythm in a manner of seconds with euclidean rhythms.
Want to surprise your audience and even yourself? Add a bit of random modulation or change the probability of a step being played or not. Try the T-1 style looping random modulator

Tangible visuals
What you see is what you get: at every touch of a knob or push of a button, 16 RGB buttons show you the state of the instrument while offering up a quick way to jump to a new setting in real-time

Performing is composing
The T-1 is an instrument designed to be played in the here and now. Whether you are working in a studio or on stage, the path between musical inspiration and performance has never been shorter.
Make relative parameter changes on one or multiple tracks simultaneously, save the changes or return to the starting point. With the T-1, your music making process is a constantly evolving flow

Technical specifications

Sequencer
Euclidean rhythm generator (w. step editing)
Advanced note repeater / arpeggiator
Melody generator
7 musical scales + 1 user scale per track
Harmonic pitch control
Random modulation on every parameter

Tracks
16 tracks per pattern
16 MIDI channels
Polyphony on every track

Storage
Auto-save
16 patterns per bank
16 banks

User interface
18 endless rotary encoders with push
23 RGB backlit silicone keypads

Physical
Matte black aluminium casing
Dimensions: L:304, W:114, H:39mm ?(11.9", 4.5", 1.5")
Weight: 815g (1.8 lbs)

In the box
1 x T-1
1 x USB cable
1 x MIDI adapter (type A)

Connectivity
USB C (midi/power)
MIDI in / out / thru (TRS type A)
CV & gate i/o
Ableton Link (WiFi)