Juno Daily

Music and tech news, interviews, features, reviews and more.

Visit Juno Daily

100% Compra Segura

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Compra Segura

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices. Visit Juno DJ

preorders
USD
Mi Idioma
Mi Divisa
Your wishlist is empty
Items in wishlist:
Recently added:
Loading...
Cart
Su carro está vacío
Items in cart:
Subtotal:
Recently added:
Loading...
Ver el carro
Inicio  All genres  All genres  

Resultados de la búsqueda

Filter

Saved Searches
Release Date
Featured
Options
Artículos del 1 al 50 de 152 en la página 1 de 4
1  2  3  4  »
Zlob Modular Foldiplier Odd/Even Harmonics Generator Module
Zlob Modular Foldiplier Odd/Even Harmonics Generator Module (frequency divider/waveshaper synth module)
Cat: 964623 Rel: 05 Oct 23
 
Odd/even harmonics generator module with feedback - 4HP.
Notes: The Foldiplier is a 4hp odd/even harmonics generator with 2 different oscillating feedback paths. The folding core of the design originates from the odd harmonics (middle)section of the Serge Wave Multiplier. But the Foldiplier adds voltage control over the symmetry and offset as well as a switch for feedback, jumper selectable between, a transistor based oscillating fuzz inspired by the Hemmo Bazz Fuss with a lot more low harmonic content and a passive oscillating half wave rectification circuit with more high harmonic content. When these feedback oscillations mix with an incoming waveform some unpredictable and unique nonlinear timbres can be achieved. The module can also be used as a no-input experimental oscillator with the feedback switch engaged. All diodes in the module are silicon.

The Fold knob controls the amount of times the waveform is folded in on its self (indicated by the red led window below the knob). The C.V. knob below is an attenuator for incoming control voltage corresponding to the Fold jack(indicated by the red led window above the jack, it only responds to positive voltage). So, the Fold knob acts like an initial amount of folding depending on its position. For example, with the Fold knob fully clockwise you can get even more folds with a control voltage in at the Fold jack. The Offset knob controls how much positive DC voltage(0 to 5v, clockwise) or negative(0 to -5v counter clockwise) DC voltage(indicated by the led window above the Offset jack, red for positive, yellow for negative) injected into the waveform via the Symmetry knob. With the Offset knob position at noon(0v) there will little effect from the Symmetry knob. The Offset jack is expecting +5v to -5v with knob position at noon to scan through the positive and negative voltage. The Symmetry knob controls the amount of negative or positive offset voltage(dependent on the Offset knob) mixed with the waveform(indicated by the yellow led window above the Symmetry jack). If positive voltage is mixed with incoming waveform more folds will occur on the positive troughs of the waveform, likewise, when negative voltage is introduced more folds happen on the negative troughs. This part of the circuit can also be broken down by thinking of the Offset as a voltage controlled crossfader swinging between positive and negative voltages into a VCA controlled by the Symmetry knob and jack. When a voltage is present at the Symmetry jack the Symmetry knob becomes an attenuator. The Symmetry jack only responds to positive voltage.

Width: 4hp
Panel Material: Double Sided PCB panel with Classic and Soulless
Reverse Power Protected
Current Consumption: +12v: 40mA, -12v: 35mA
Depth: 47mm or 1.75"
All through-hole build
Ships with M3 black nylon screws
Expandable: No
Read more
 1 in stock $151.63
Click for better price!
or call +44 20 7424 1960
quote 964623
Xaoc Devices Poczdam 1989 Leibniz Device Komutator Module
Xaoc Devices Poczdam 1989 Leibniz Device Komutator Module (clock generator/digital/switch synth module)
Cat: 894984 Rel: 14 Oct 22
 
Poczdam is a binary data routing solution for the Xaoc Leibniz Subsystem.
Notes: Part of Xaoc's Leibniz subsystem, which processes signals and voltages by manipulating binary 8-bit numbers, the Poczdam allows switching between two data sources.

Supplier's Notes:
Poczdam is a binary data routing solution for the Xaoc Leibniz Subsystem. It facilitates manual and remote switching between two Leibniz data sources, modifying individual bits of the data stream, and re-clocking the data with its onboard voltage-controlled wideband oscillator or any external clock signal. Poczdam is particularly useful within complex Leibniz setups where the user needs to reconfigure the data flow between multiple modules. However, it can also be employed in small creative patches, e.g., for waveform splicing, disrupting rhythmic loops, or generating digital chaos.
To better understand the device and avoid common pitfalls, it is strongly advised to read through the entire user manual before use.

Component of the Leibniz Binary Subsystem
Routing Leibniz data
Reclocking Leibniz data
Additional CV clock generator (up to 2MHz)

6hp, 30mm deep
Current draw: +20mA/-10mA
Reverse power protection

The high quality Coal Mine black panels are available for all Xaoc Devices modules. Sold separately. Ask your favourite retailer.

Drezno is the input/output front-end of the system, consisting of an analogue-to-digital converter (ADC) and a digital-to-analogue converter (DAC), that alone can be used for manipulating analogue signals and voltages based on their binary representation.

Lipsk is a binary logic processing expander module that can flip (invert) individual bits of the digital signal representation. There are more Leibniz Binary Subsystem elements coming, with specialized and advanced sets of features.

Jena is a digital module that may be used as a flexible waveshaper for CV and audio signals, a wavetable oscillator, a Walsh function generator, or a rhythm generator.

Erfurt is a bi-directional digital counter, frequency divider. It has multiple applications: the output of the counter may be used as a phase source driving a digital wavetable, connected to other Leibniz modules it may scan waveshapes in Jena, produce stepped voltages useful for making interesting glissandi with Drezno and any VCO, generate gate patterns animating the spectrum of Odessa harmonic banks, spawn pseudo-chaotic sequences when fed back to Lipsk, etc.
Read more
 1 in stock $185.09
Xaoc Devices Gera 1989 Binary Product Kommander Module
Cat: 910516 Rel: 21 Nov 22
 
1989 Binary Product Kommander
Notes: Gera is a component of the Leibniz subsystem that allows masking individual bits of the digital data by the use of logical AND operation.

It features 8 individual gate inputs that affect the individual bits of data, as well as 8 illuminated tact switches for manual inverting of each control input. When connected to Drezno that is processing a waveform or voltage, masking of individual bits yields various forms of quantization. However, Gera can function on its own. The AND operation is a basic building block for sequence automation, chaos and rhythm generation, and various computer-like modular patches.

Bit processing logic in Gera is hardware based, hence there is virtually no latency, and the binary signals may change at extreme rates.

Main features:

Logical AND operation on Leibniz data
Masking of individual bits controlled manually and by gate signals
Visual indication by illuminated buttons
6HP
30 mm depth (including ribbon cable brackets)
- +12V: +45mA / -12V: 0mA / +5V: 0mA
Read more
 1 in stock $150.58
Click for better price!
or call +44 20 7424 1960
quote 910516
Xaoc Devices Tallin 1956 Dual Discrete Core VC Amp Module
Xaoc Devices Tallin 1956 Dual Discrete Core VC Amp Module (distortion/dual/stereo/VCA synth module)
Cat: 671740 Rel: 04 Dec 17
 
Dual voltage control amplifier & overdrive - 6HP
Notes: Tallin is a dual voltage controlled amplifier (VCA) with overdrive, offering some unusual control features and a range of attractive tonal characteristics. Each of the two identical channels offers two simultaneously available inputs for voltage control over signal attenuation or gain, with linear and exponential response to CV. Volume control knobs offer manual gain settings ranging from fully closed (-80dB) up to +18dB. A colour LED indicator displays output signal levels. A soft-clip circuit avoids harsh clipping distortion, while a switchable overdrive circuit offers two carefully crafted distortion responses, simulating the sound of classic tube amplifiers.

Since both CV inputs are simultaneously active, they can be jointly exploited within patches featuring more complex volume control that otherwise would require using two traditional VCAs in series. As the signal path is DC-coupled, Tallin can also be used for handling the control voltages.
Read more
 1 in stock $162.08
Click for better price!
or call +44 20 7424 1960
quote 671740
Xaoc Devices Deva 1970 Feedback Loop Commander Module
Xaoc Devices Deva 1970 Feedback Loop Commander Module (dual/stereo/expander/filter/VCA synth module)
Cat: 945644 Rel: 05 Jul 23
 
An expander module for Xaoc Devices Timiszoara multi-fx in 8HP.
Notes: Add external feedback loops, tilt filters and more to the Timiszoara effects module with this versatile expander. A must-have for Timiszoara owners.

Supplier's Notes:
Deva is an expander for Xaoc Devices' Timiszoara multi-fx module designed for creative exploration of the dirty/nasty side of signal processing. Deva opens up the Timiszoara programs you've come to love with some unexpected twists and turns along the way. The analog side features two external feedback loops (for the left and right channel) with tilt filters adjustable via sliders with two additional switches for choosing positive or negative feedback (for each channel). The third slider controls the DAC clock - from overclocking by a factor of two down to 16-times slower, so you can go from chipmunk to hardcore teeth gnashing of underclocked goodness. A switch allows for turning the clock control off for normal/regular operation. All features have inputs for external CV.

Technical details

Eurorack synth compatible
8hp, skiff friendly
Power drawn from Timiszoara: +60mA/ -50mA
Reverse power protection

Read more
 5 in stock $162.08
Xaoc Devices Sewastopol II 1948 Audio Port & Voltage Extractor Module (silver)
Xaoc Devices Sewastopol II 1948 Audio Port & Voltage Extractor Module (silver) (comparator/envelope follower/envelope generator/preamp synth module)
Cat: 676518 Rel: 15 Feb 18
 
Multi-function Eurorack module - 10HP
Notes: Sewastopol is a multifunction Eurorack module designed for easy interfacing of external gear to your modular environment. It can export line and professional level audio, import audio from instruments and electroacoustic transducers, and analyse the incoming audio to generate voltages and triggers to control your modular system.

This is a second, vastly improved revision to the original 2014 Sewastopol, featuring a completely redesigned preamplifier circuit, better ergonomics and various other improvements.
Read more
$247.83 SAVE 20%
 3 in stock $198.26
Click for better price!
or call +44 20 7424 1960
quote 676518
Winterbloom Micronova Power Supply Module Bundle
Cat: 982884 Rel: 05 Jan 24
 
Modular case power supply, bussboard & power supply module included
Notes: The tiny but mighty Eurorack power supply with all the bells and whistles

Micronova is a miniature power supply with a big soul. It can provide up to 18W of power for your modules and multiple units can be easily daisy chained to power larger systems.

This bundle includes:

an assembled Micronova
an assembled Micronova busboard
a Micronova front entry kit

Please note that the front entry requires assembly. It's a delightfully easy kit, but make sure you know what you're getting into!

A suitable AC-DC power adapter is required. We have adapters available for domestic customers. International customers please take a look at the manual for guidance and recommendations.

Check out the manual to get to know Micronova and all of the delightful ways you can integrate it into your case.

100 mm x 30 mm x 13 mm
15-20V, 1.5A
+12V @ 1A
-12V @ 300mA
+5V @ 500mA
Daisy chainable
Busboard included
Front entry kit included
Read more
 1 in stock $169.40
Click for better price!
or call +44 20 7424 1960
quote 982884
Tiptop Audio BD909 Analogue Bass Drum Generator Module
Cat: 590433 Rel: 19 Jan 16
 
Percussion synthesiser module reverse-engineered from the original TR-909 circuit - 8HP wide
Notes: Reverse-engineered from the original machine, our BD909 is an identical recreation of the original all-analog drum circuit of the TR-909. We've added additional controls and synthesis features that turn this classic circuit into a chest-pounding analog bass drum laboratory - all tightly packed into an 8HP module. The BD909 sound differs from our BD808 in that the main sonic energy is centered in the mid to low frequency range (as opposed to the low frequency range of the BD808). This frequency range gives the needed headroom allowing your bass Lines to deeply fill up the low end while the kick drum rides on top - creating a clear and punchy mix.

The BD909 includes all the controls found in the original: Attack, Decay, Tune Decay, Accent and Level. We have gone beyond that and added controls that further increase the palette of sound this circuit is capable of. First off, we've added a tuning control knob for the oscillator and included its own CV input and attenuator that let you tune your 909 kick with your bass lines. Next, we added control knobs for the tuning attack and extending tuning decay - each one affects the other, allowing for very intuitive and interactive sound shaping - this feature opens up numerous "sweet spots", and provides the ability to center the energy peak at different parts of the sound. Finally, we offer additional punch and distortion by giving complete control over the internal waveshaper, which allows you to overload the waveform manually or with voltage control.

Beginning with the classic and pure sound of the 909 kick, these additional functions greatly expand the BD909's flexibility and let it create powerful analog bass drums that range from soft and smooth to punchy and aggressive - and everything in between.
Read more
MRP:$187.19 SAVE 13%
 2 in stock $162.08
Click for better price!
or call +44 20 7424 1960
quote 590433
TipTop Audio Control Path Voice Dynamics Module
TipTop Audio Control Path Voice Dynamics Module (dynamics/envelope generator/VCA module)
Cat: 947138 Rel: 04 Mar 24
 
Voice dynamics module - 8HP
Notes: CONTROL PATH is an all in one voice dynamics module that helps build full voices quickly. It contains two analogue envelopes with velocity cv, and one VCA. In a typical voice patch the left envelope will control a filter and the right envelope will be the voice VCA. Velocity control is provided for each envelope and delay front panel trimmers are used to compensate for any miss match between incoming gate signal and velocity CV timings. Envelope cv outs are 0-5V, Velocity cv ins are 0-5V.

Size: 8HP - Depth: 40mm / 1.5"
Power: +12V 50mA / -12V 55mA
Read more
 1 in stock $157.39
Click for better price!
or call +44 20 7424 1960
quote 947138
Tiptop Audio Z5000 Multi-Effect Module (white)
Cat: 757467 Rel: 17 Dec 19
 
Powerful DSP effects module - 8HP
Notes: Back in 2008, the original Z5000 was not only the world's first Eurorack DSP effects module but also the first Tiptop Audio module released. It brought voltage controlled digital effects to Eurorack for the first time and the Z5000 was eventually replaced by the Z-DSP open source platform. Now, years later with over a decade of experience developing audio effects for Eurorack signals we are introducing a totally new version of the Z5000: a compact stereo 8HP multi effect with voltage controlled parameters, VC analogue clock generator driving the DSP chip and 24 of our creme de la creme reverbs, delays, modulation, harmonization and pitch modulated effects. A number of programs in the Z5000 combine more than one effect, in series or parallel, that represent studio techniques from-the early days till modern times often leaning toward the more experimental side.
Read more
MRP:$235.29 SAVE 27%
 2 in stock $172.03
Teia Synthesizers MapVolt Dual Voltage Processor Module
Cat: 937908 Rel: 16 Feb 24
 
Dual voltage processor module - 6HP
Notes: Designed with versatility in mind, MapVolt is a dual-channel Universal Voltage Processor built for flexibility in handling audio and CV signals.

With only 6hp, Mapvolt is a multipurpose tool for voltage-controlled scaling, inverting, offsetting, subtracting, and mixing functions.

Each channel of MapVolt can operate in either Polarizer or Attenuator mode, allowing manual control via knobs or CV signals. In Polarizer mode, it functions as a Voltage Controlled Attenuator-Inverter, granting control over signal level and polarity. Additionally, it can be used as a Four-Quadrant Multiplier or Ring Modulator for audio signals, with the processor input serving as the carrier signal and the polarizer's CV input acting as the modulator.

In Attenuator mode, MapVolt operates as a VCA, providing control over signal levels. Its VCA CV input range of +5/-5 makes it well-suited for amplitude modulation (AM) with other +/-5V waveforms.

MapVolt is equipped with dedicated Voltage Offset knobs for each channel, which can be controlled via CV. If no input is patched into the Processor input channel, the Voltage Offset knobs can be used as Offset Generators.

With its dedicated mixing stage, MapVolt enables the combination of both channels into a shared output. Furthermore, if one of the processor channels is inverted, it allows for the subtraction of one signal from the other.

Dimensions
6 HP
33 mm deep

Current Draw
65 mA +12V
65 mA -12V
Read more
 1 in stock $154.77
Click for better price!
or call +44 20 7424 1960
quote 937908
SynthRotek Five Amp Blue Power Supply Module
Cat: 836844 Rel: 12 Jul 21
 
Power supply module - 4HP.
Notes: The Five Amp is a throwback to SynthRotek's original 5A Power Supply with some upgrades. It uses a quality 12V power brick for the +12V power regulation instead of a +12V converter. The plus side of doing it this way is that whatever amperage the -12V and +5V rails are not using can be used by the +12V rail, which always draws the most of the three.

Five Amp comes in three different power configurations. It is recommend that you select an option based upon your -12V rail draw. For a rule of thumb, Red (with red LEDs) will power a single row of 84 or 104HP, Green will power two rows of 104HP, and Blue will power three to four rows of 104HP.
Read more
 1 in stock $155.82
Click for better price!
or call +44 20 7424 1960
quote 836844
Ritual Electronics Amnis Generative Shift Register Module
Ritual Electronics Amnis Generative Shift Register Module (clock modulator/CV modulation/random/sequencer/logic module)
Cat: 921614 Rel: 13 Mar 23
 
Linear feedback shift register module - 6HP
Notes: Amnis is a shift register with a few tricks up its sleeves. It can be used as a generative sequencer for gates and CV, as a tunable digital noise source, as a random gate and CV generator, as the center of a chaotic system and more.

It needs two input signals to start doing its thing. A Clock and some Data. Data can be pretty much any signals. From these two signals Amnis will generate 8 gate outputs, always on the clock. From these gate outputs, it will generate 3 staircase CVs and a slewed CV. With 8 gates and 4 CV outputs it can be the heart of any patch.

Amnis has an XOR input for linear feedback. A shift register with linear feedback is the core of the Rungler, the chaotic core in Rob Hordijk's Benjolin and Blippoo Box. With Amnis you can recreate these type of behaviors with any oscillators you have on hands.

Amnis is compatible with the Turing Machine expanders thanks to its expansion port at the back.

Due to popular demand for a 3U shift register, Amnis replaces (and expands on) Ruissellement, which was the 1U version of this module.

Read more
 2 in stock $175.69
Click for better price!
or call +44 20 7424 1960
quote 921614
Rides In The Storm QEG Quad Loopable Envelope Generator Module
Cat: 846779 Rel: 18 Feb 22
 
Quad loopable envelope generator module with 16 triggers & mix outs - 22HP
Notes: QEG Quad Loopable ADSR Envelope Generator with 16 Trigger and Mix Outs

Quad Version of FEG plus Trigger Outs

Mix Out ( normal and reversed) of all envelopes for multistage applications

Very exponential "snappy" course and rounded

Edges for a compressed "bonky" sound

Two time zones are offered

Remote control via CV of two time zones

Loopzone from Attack to Release

One shot mode for trigger signals

Jumper at the back for reset mode

Manual Trigger button

Normal and Inverse Output

Trigger Outs for each section: Begin of Attack, End of Attack, End of Sustain, End of Release

Power consumption: 120 mA (+12 V) / 100 mA (-12 V)
Rackspace: 20HP
Depth: 25mm
Read more
! low stock $158.95
Click for better price!
or call +44 20 7424 1960
quote 846779
Plankton Electronics Spice VCF Voltage Controlled Filter Module Plankton Electronics Spice VCF Voltage Controlled Filter Module
Cat: 934371 Rel: 24 Mar 23
 
Voltage controlled filter module in 6HP.
Notes: SPICE VCF is a 3 state (LP, BP, HP) Voltage Controlled Filter based on the SEM filter.

1 input and 3 individual outputs for High Pass, Band Pass and Low Pass.

CV inputs for Cutoff and Resonance.

Resonance system based on the SEM VCF one. It's capable of A controlled super round and nice resonance. With a bit of modulation this unit will make to talk your sawtooth wave.

The XMOD potentiometer sends the BP output the CV Cutoff input adding some distortion and a variety of resonance effects to the processed sound.

Dimensions
6 HP
34 mm deep

Current Draw
15 mA +12V
12 mA -12V
Read more
 1 in stock $154.77
Click for better price!
or call +44 20 7424 1960
quote 934371
Noise Engineering Sono Abitus Output Module (black)
Cat: 795629 Rel: 30 Oct 20
 
Stereo balanced ¼" TRS output & ¼" headphone output module with separate level controls - 4HP
Notes: Sono Abitus is a high-quality output module. It has a stereo pair of Eurorack-level 1/8" inputs that feed a pair of 14" TRS jacks for line output and a 14" headphone output. The headphone output and line outputs have separate level controls, making it easy to monitor while performing or recording.

Size and power:
4 HP

+12v: 50mA

-12v: 50mA

+5v: 0mA

Sono -- from Latin: "to make a noise"

Abitus -- from latin: "way out, exit"

"Make noises exit"

Read more
MRP:$245.75 SAVE 20%
 1 in stock $195.43
Noise Engineering Viol Ruina Analogue Resonant Lowpass Filter & Distortion Module (black)
Cat: 737544 Rel: 26 Jun 19
 
Lowpass resonant self-modulating VCF with built-in envelope follower and independent overdrive circuit. This thing screams. No really.
Notes: Viol Ruina is an all-analogue distortion and lowpass filter with an internal envelope follower and self-modulating cutoff. The four-pole design is reminiscent of the classic filters we all know but with a completely new and slightly ridiculous twist. The independently addressable distortion circuit takes VR into overdriven paradise with a shocking amount of drive. Built-in envelope following makes an easy way to create dynamic patches with the flick of a switch, and feedback FM takes VR to a whole new realm of filthiness. Run a sound through VR, you'll get something cool out of it.
Read more
 1 in stock $192.41
Click for better price!
or call +44 20 7424 1960
quote 737544
Noise Engineering Vox Digitalis Intuitive Pitch CV Sequencer Module (black)
Cat: 739891 Rel: 30 Aug 19
 
Intuitive 1-16 step pitch sequencer in 4hp.
Notes: Ultra-simple 16-step Eurorack CV sequencer with randomisation option and storage for up to 16 patterns. Straight to the point business, all in just 4HP of rack space.

Supplier notes:
Small, easy-to-program sequencers are a bit of a rarity. Vox Digitalis is our answer to this issue. With intuitive displays and simple controls, VD is perfect for all your pitch CV needs. Set your sequence length, dial in each note, randomize, save and load 16 sequences -- VD does all the stuff the big sequencers do, just in 4HP.
Read more
 1 in stock $166.26
Click for better price!
or call +44 20 7424 1960
quote 739891
Noise Engineering Quantus Ampla 4-Channel VCA Module (black)
Cat: 841384 Rel: 13 Sep 21
 
A compact four-channel VCA.
Notes: Quantus Ampla is a compact four-channel VCA. But it's not just any VCA: with some unique normalizing, mixing, and CV options, and a bit of NE flair, you can use it for tonnes of stuff. From the top, each channel has two independent modes: Amplify, which gives you normal VCA response, and Attenuate, which makes the VCAs close instead of open in response to positive CV.

The CV inputs are circularly normalled, so you can easily create ducking effects over multiple voices, volume fades, and transitions, all with minimal patching. Plus, the outputs mix down, so it can be two two-channel mixers, a 3-channel mixer plus a VCA, a 4-channel mixer- mix and match to your heart's content. Did we mention it's DC-coupled? Yep, you can use it to process CV signals, too.

You can never have too many VCAs. Your Quantus Ampla is waiting for you.
Read more
Tags: VCA module
MRP:$245.75 SAVE 25%
 1 in stock $184.23
Noise Engineering Xer Dualis 4-Channel Stereo Mixer Module With Mutes (silver)
Cat: 908165 Rel: 07 Nov 22
 
4-channel stereo mixer with mutes.
Notes: Xer Dualis is a compact analogue four-channel stereo mixer. Each channel has left and right inputs, a level control, and a mute.

Want to use mono signals? No problem! The left inputs normal to the right ones. On the stereo pair output, XD features a simple meter and a clip indicator to keep your mix clean. Xer Dualis is a compact and performable choice whether you need a submixer for a large system or an easy way to mix all the elements of a portable case together.
Read more
MRP:$225.88 SAVE 14%
 1 in stock $193.46
Noise Engineering Clep Diaz Complex CV Generator Module (silver)
Noise Engineering Clep Diaz Complex CV Generator Module (silver) (CV modulation/LFO/random/sequencer synth module)
Cat: 676567 Rel: 03 Apr 18
 
Sexy little clocked LFO & random modulation source.
Notes: Clep Diaz is a handy and small step CV and LFO generator. In step and random modes, use the encoder to control the number of steps in the sequence; in LFO mode, the encoder controls the amplitude of the wave. Toggle the directionality of the sequence: up, down, or up/down to customize the CVs further. CD also gives CV control over the number of steps in the sequence and an end-of-cycle trigger output. Unipolar and bipolar outputs allow maximal control.
Read more
MRP:$193.46 SAVE 15%
 1 in stock $165.22
Noise Engineering Expando Expandi 8-Input CV Expander Module For Xer Mixa (silver)
Cat: 968010 Rel: 02 Oct 23
 
8-input CV expander module for Xer Mixa - 4HP.
Notes: 8-input CV expander for Xer Mixa

Expando Expandi adds 8 freely assignable CV inputs to the Xer Mixa in just 4 HP. Connect up to two Expando Expandi to Xer Mixa for easy CV control over channel levels, pan, aux sends, and more.

Expando Expandi is not for use on its own and is currently compatible only with Xer Mixa.
Read more
 1 in stock $165.22
Click for better price!
or call +44 20 7424 1960
quote 968010
Noise Engineering Expando Expandi 8-Input CV Expander Module For Xer Mixa (black)
Cat: 968009 Rel: 02 Oct 23
 
8-input CV expander module for Xer Mixa - 4HP.
Notes: 8-input CV expander for Xer Mixa

Expando Expandi adds 8 freely assignable CV inputs to the Xer Mixa in just 4 HP. Connect up to two Expando Expandi to Xer Mixa for easy CV control over channel levels, pan, aux sends, and more.

Expando Expandi is not for use on its own and is currently compatible only with Xer Mixa.
Read more
 1 in stock $166.26
Click for better price!
or call +44 20 7424 1960
quote 968009
Noise Engineering Nive Grad Stereo/Dual-Mono Level Shifter Module (black)
Cat: 982048 Rel: 04 Dec 23
 
Stereo or dual-mono level shifter module - 4HP
Notes: Nive Grad is a level shifter designed for simplicity. Two Eurorack signals can be attenuated down to pedal and line levels, and two external line or pedal signals can be amplified up to Eurorack level. Integrating a drum machine, external synth, effects processor, or guitar with your Eurorack system has never been easier!

Nive Grad uses 1/8" jacks to save HP. If you want to use 1/4" gear with your system, ask your modular supplier about mono/TS 1/8" to 1/4" adapters or adapter cables.

Nive Grad pairs well with Noise Engineering's Xer Mixa system mixer, but can be used in any Eurorack system.

Type: Universal drum synthesizer
Size: Level Shifter
Depth: .9 inches
Power: 2x5 Eurorack
+12 V: 25 mA
-12 V: 25 mA
5 V: 0mA
Nive - level - from Latin niveum

Grad - step or degree- from Latin Gradus
Read more
 2 in stock $157.90
Click for better price!
or call +44 20 7424 1960
quote 982048
Noise Engineering Nive Grad Stereo/Dual-Mono Level Shifter Module (silver)
Cat: 982053 Rel: 04 Dec 23
 
Stereo or dual-mono level shifter module - 4HP
Notes: Nive Grad is a level shifter designed for simplicity. Two Eurorack signals can be attenuated down to pedal and line levels, and two external line or pedal signals can be amplified up to Eurorack level. Integrating a drum machine, external synth, effects processor, or guitar with your Eurorack system has never been easier!

Nive Grad uses 1/8" jacks to save HP. If you want to use 1/4" gear with your system, ask your modular supplier about mono/TS 1/8" to 1/4" adapters or adapter cables.

Nive Grad pairs well with Noise Engineering's Xer Mixa system mixer, but can be used in any Eurorack system.

Type: Universal drum synthesizer
Size: Level Shifter
Depth: .9 inches
Power: 2x5 Eurorack
+12 V: 25 mA
-12 V: 25 mA
5 V: 0mA
Nive - level - from Latin niveum

Grad - step or degree- from Latin Gradus
Read more
 1 in stock $156.85
Click for better price!
or call +44 20 7424 1960
quote 982053
NANO Modules ONA Analogue Multifunction Oscilator Module
NANO Modules ONA Analogue Multifunction Oscilator Module (clock generator/CV modulation/frequency divider/LFO/oscillator synth module)
Cat: 796145 Rel: 20 Nov 20
 
clock generator / CV modulation / frequency divider / LFO / oscillator synth module
Notes: A warm and deep sound source you can rely on

A flexible and warm Analog Multifunction Oscillator, rich in harmonics. Excellent for performance use!

ONA can work as an Audio Oscillator or as a Low Frequency Modulator and it provides control over all its parameters, making it a versatile, deep and easy-to-use oscillator.

Thanks to its triangle-core oscillator and wave-shapers you can choose between a big palette of output waveforms to give shape to your ideas.

Classic Waveforms. Sine, Triangle, Saw and Square.

2 Complex Waveforms with Pulse Width Modulation.

2 Sub-Waveforms to add some bass sounds easily.

Blend them to give unlimited depth to your sound!
Read more
 2 in stock $158.95
Click for better price!
or call +44 20 7424 1960
quote 796145
NANO Modules VCV Random CV Generator Module NANO Modules VCV Random CV Generator Module NANO Modules VCV Random CV Generator Module
NANO Modules VCV Random CV Generator Module (clock generator/CV modulation/noise/quad/random/sample & hold/slew limiter module)
Cat: 1000135 Rel: 02 Apr 24
 
Random CV generator module - 10HP
Notes: CV Random is a random CV generator with 4 types of randomness and a triggerable sample-and-hold function.

Sliders allow you to set the internal clock tempo (RATE), shape the probability of triggering (PROB), blend old with new values (RND) and set the shape of all four random outputs (SHAPE).

4 different sliders

RATE

Sets the tempo of the internal clock. The CV input below the slider adjusts the clock rate, with 1V/oct calibration when the CV attenuverter is 100%. Upon each clock trigger, the RATE slider light blinks, and there is a chance for the internal random source to generate a new value.

PROB

This probability is set by the PROB slider, and if a new value was generated, the PROB slider light blinks and a pulse is emitted from the TRIG output.

RND

When the internal random source generates a new value, it mixes the previous value with a random value, with an amount specified by the RND slider.

SHAPE

The SHAPE slider sets the shape of all four random outputs. At its lowest position (0%), all outputs immediately jump to the new random value (the target value) when the clock is triggered.

At non-zero positions, the outputs interpolate between the previous and the target value, using a different behaviour for each output.

Internal random clock source

Whenever the clock activates, the RATE slider's light flashes. At the same time, there's a chance that the internal random source will create a new value, depending on the PROB slider's setting.

If it does create a new value, the PROB slider's light flashes too, and a pulse comes out of the TRIG output.

External IN & TRIG inputs

If the TRIG input is patched, the RATE slider is ignored, and the internal clock is only triggered when an external trigger is received. The PROB slider is used to filter this trigger by applying some probability.

Self-modulation

Thanks to a switch in the back of the module, you can normalize the LIN output to the 4 CV inputs and adjust the amount of modulation for each parameter with the attenuverters.

This adds another layer of randomness to your results, enabling more dynamic and unpredictable outcomes.

SHAPE Outputs

The STEP output jumps to the new value in one step at 0% SHAPE, and divides the transition into 16 steps at 100% SHAPE.

The LIN output immediately reaches the new value at 0% SHAPE, and takes the whole clock cycle to do so at 100% SHAPE, staying constant in between.

The EXP output shifts exponentially, becoming linear at 100% SHAPE, with its pace adjusted by the SHAPE slider.

The SMTH output transitions smoothly, with the speed controlled by the SHAPE setting, holding at the target until the cycle ends.

Specifications

Dimensions 10HP - 50×128,5mm
Current 63 mA +12V / 11 mA -12V / 0 mA +5V
Input & Output Signals +/-10V
Impedance Input 10k - Output 10k
Materials PCB and Panel - FR4 1,6mm
Depth 40mm including connectors (Skiff friendly)
Read more
MRP:$176.73 SAVE 10%
 1 in stock $158.95
Click for better price!
or call +44 20 7424 1960
quote 1000135
Morphor Mixer 5-Channel Amplifier Module Morphor Mixer 5-Channel Amplifier Module Morphor Mixer 5-Channel Amplifier Module
Morphor Mixer 5-Channel Amplifier Module (mixer/utility synth mdoule)
Cat: 946952 Rel: 19 Oct 23
 
5 channel mixer module with optimal playability in 8HP.
Notes: The Morphor Mixer - 5 Channel Amplifier is a flexible analogue mixer module that can find a home in every type of Eurorack setup.

Each of the five channels feature an attenuator knob and mute switch to allow for instant playability, for example in live settings.

Input signals can be AC or DC-coupled depending on your preferred setting.

The output stage also features an extra attenuation/gain stage that allows you to double the mixed signal. An additional master mute switch, clipping LED are nice-to-haves that complete this intuitive mixer module.

Weight: 102 g
Dimensions: 128.5 × 40.3 × 30 mm
Width: 8 HP
Read more
 1 in stock $162.10
Click for better price!
or call +44 20 7424 1960
quote 946952
Morphor VCF Multimode Analogue Filter Module Morphor VCF Multimode Analogue Filter Module Morphor VCF Multimode Analogue Filter Module Morphor VCF Multimode Analogue Filter Module
Morphor VCF Multimode Analogue Filter Module (dual/stereo/filter synth module)
Cat: 947102 Rel: 19 Oct 23
 
Multimode VCF module with dual filter core and pole selection in 8HP.
Notes: The Morphor VCF Multimode is an intuitive, no nonsense 8HP fully analogue filter module. Featuring a dedicated lowpass and highpass filter core.

To shape the sound exactly the way you want, both filter sections have a cutoff frequency control over the whole audible frequency range through a knob and bipolar CV jack. Additionally, resonance control and a switchable pole selection are available.

The second output acts as both a bandpass and highpass output, depending on the position of the BP/HP mixing knob. Combining all these features results in an easy-to-use but flexible module to perform your unique filter needs.

Weight: 110 g
Dimensions: 128.5 × 40.6 × 40 mm
Width: 8 HP
Read more
 1 in stock $172.55
Click for better price!
or call +44 20 7424 1960
quote 947102
Morphor Plectrum Analogue BBD Pluck Module
Morphor Plectrum Analogue BBD Pluck Module (delay/drum/synth voice module)
Cat: 976499 Rel: 19 Oct 23
 
Analogue bucket brigade device pluck module - 8HP
Notes: The Morphor Plectrum - Analogue BBD Pluck is the successor of Morphor's successful module. Now only 8 HP instead of 10 HP with additional CV-able feedback!

Plectrum is a high quality, fully analogue Eurorack module that can produce plucked string-like sounds. It is a compact all-in-one solution for generating amazing bass, acoustic guitar, percussion and other amazing sounds.

The module is based on the Karplus-Strong principle with a true analog audio path built with an authentic bucket brigade delay (BBD) circuit which is recognizable by its specific timbre. By using carefully chosen high quality components, this module has a rich, warm analogue sound.

Now being only 8 HP in width, you won't need a lot of space to get going and start creating some incredible sounds. If you're looking to fully sculpt the string-like sound, you can extend the internal Karplus-Strong loop by breaking out the signal and adding external modules like filters and/or FX modules to it.

Features

100% analogue
Karplus-Strong principle
Built with classic BBD chip
Break-out BBD loop
Internal/external loop switch
Trigger input
1V/oct input
Tune knob
Pitch modulation CV input
Feedback CV input
Colour CV input (i.e. internal loop LPF cut-off frequency)
Mono output

Specifications

Panel width: 8 HP
Panel height: 3 U
Module depth: 40 mm
Current draw: 12V : 40 mA | -12V : 40 mA | +5V : 0 mA
Dimensions: 128.5 x 40.3 x 40 mm
Weight: 259 g
Frequency Range: sub-audio range to roughly 800 Hz
Power Socket: 16-pin
Read more
 1 in stock $197.65
Click for better price!
or call +44 20 7424 1960
quote 976499
Molten Modular Motion MTR 1U CV & Audio Utility/Real Time Visualiser Module Molten Modular Motion MTR 1U CV & Audio Utility/Real Time Visualiser Module
Molten Modular Motion MTR 1U CV & Audio Utility/Real Time Visualiser Module (mixer/attenuator/polarizer/utility synth module)
Cat: 946024 Rel: 02 Jun 23
 
1U version of Molten Modular's MTR
Notes: This 1u version will be functioning as its 3u counterpart but with four channels.

More info to follow.
Read more
 1 in stock $150.32
Click for better price!
or call +44 20 7424 1960
quote 946024
Modulaire Maritime Tarot Pseudo-Paraphonic Waveshaper Module (black)
Modulaire Maritime Tarot Pseudo-Paraphonic Waveshaper Module (black) (distortion/frequency divider/LFO/oscillator/waveshaper eurorack module)
Cat: 853246 Rel: 23 Jun 22
 
A pseudo-paraphonic waveshaper module.
Notes: Tarot is a voltage controlled waveshaping module using different techniques to achieve complex waveforms and multilayered sound: Frequency synthesizer who, besides creating frequency multiplications/division, performs demodulation resulting in FM glissando effect, combined with separate stages of wave folding and rectification-this makes Tarot able to produce whole variety of new timbres due to creation of new harmonics. The shifting of those is induced and animated by offsets controlled from CV inputs. It has a built-in LFO to provide synchronized movement acting in phaser-like or, when set to higher rates, in chorus-like (or PWM) manners which can give some huge synth leads, pads or drones. Otherwise search for some hitting metal tones to create your industrial sounds & more.

Like in Tarot there are many constellations to be explored finding different characters within shuffling of its sonic deck of cards.

Dimensions
12 HP
35 mm deep

Current Draw
70 mA +12V
30 mA -12V
Read more
 1 in stock $175.67
Click for better price!
or call +44 20 7424 1960
quote 853246
Modbap Modular Transit 2-Channel Stereo Mixer Module (black)
Modbap Modular Transit 2-Channel Stereo Mixer Module (black) (dual/stereo/dynamics/mixer/VCA synth module)
Cat: 877211 Rel: 08 Jul 22
 
2-Channel Stereo Eurorack Mixer.
Notes: Transit has two stereo (dual mono) channel lanes of audio with an all-analogue signal path. Each stereo channel lane has its own input gain control, mute button and ducking input. The Ducking input on each channel operates like traditional sidechaining on a compressor where an input signal, CV or Trigger input (i.e. LFO, Clock, Gate) modulates the gain reduction of the audio.

Transit offers a main stereo output controlled by the master volume control knob and an independent 3.5mm headphone output controlled by its own headphone level control knob.

Digitally controlled LEDs for each stereo channel lane indicate level via white, blue and pink illumination while engaging mutes illuminates the LEDs with the color red. Master and headphone levels also have their own LEDS for level indication using the same color scheme of illumination.

All in all, Transit is a rather full features compact 6hp dual stereo channel lane eurorack formatted mixer that offers easy signal mixing, gain staging, ducking, and performance-oriented mutes. Transit is just as at home in a small eurorack system as one Transit or several would be in a larger system.

Tech specs

Width: 6HP
Depth: 30mm
Power: 50mA +12V, 50mA -12V
Read more
$208.10 SAVE 20%
 3 in stock $166.49
Michigan Synth Works Threshold Edges Clone Module With Integrated MIDI Expander (black)
Cat: 802202 Rel: 07 Jan 21
 
Audio generator module with MIDI fuctionality
Notes: 10HP Edges Clone with integrated midi interface and PSImidi which allows any TRS midi cable to be used.

MIDI Functionality:

MIDI Learn: Press this button and send a midi note. The device will use that channel as the base channel

MIDI Mode: This button cycles between two operational modes.

1. 4 single voices trigger on 4 midi channels starting on the base MIDI channel (i.e. base channel is channel 2 so the voices are mapped over channels 2, 3, 4, 5)

2. Simple Poly mode where each voice plays on a different note on the same midi channel

Note about MIDI and Gating: The gate is normalled OPEN by the Gate 1 input. This is by design but will also force the gate open when the device is triggered by midi. Placing a dummy jack will break the open normal the gate will trigger via MIDI normally

Read more
 1 in stock $189.28
Click for better price!
or call +44 20 7424 1960
quote 802202
Michigan Synth Works MicroTides Version 2 Tidal modulator Module (black)
Michigan Synth Works MicroTides Version 2 Tidal modulator Module (black) (clock generator/digital/envelope generator/frequency divider/function generator/LFO/oscillator synth module)
Cat: 802220 Rel: 07 Jan 21
 
Micro tidal modulator module in 8HP.
Notes: 8HP Tides version 2

Fully calibrated.
Read more
 1 in stock $189.28
Click for better price!
or call +44 20 7424 1960
quote 802220
Michigan Synth Works MicroTides Version 2 Tidal Modulator Module With LED Pots (black)
Michigan Synth Works MicroTides Version 2 Tidal Modulator Module With LED Pots (black) (clock generator/digital/envelope generator/frequency divider/function generator/LFO/oscillator synth module)
Cat: 802222 Rel: 07 Jan 21
 
A tidal modulator module with LEDs in 8HP.
Notes: 8HP Tides version 2

Fully calibrated.

With LED Pots for the attenuverters.
Read more
 1 in stock $198.69
Click for better price!
or call +44 20 7424 1960
quote 802222
Michigan Synth Works F8R 8-Channel Fader Bank Module (black)
Michigan Synth Works F8R 8-Channel Fader Bank Module (black) (controller/CV modulation/MIDI synth module)
Cat: 802345 Rel: 06 Jan 21
 
8-channel fader bank module
Notes: F8R is a 8 channel, 16hp control surface for Eurorack

16HP Width, 20mm Depth
Current Draw: +12V 50 mA, -12V 40 mA

Basic Usage instructions:

Front:

Voltage Select switches: Independent for each channel. Does NOT affect MIDI/I2C data

Slider LED color: To change the LED color, simply remove the cap and rotate the square LED 180s. Do NOT force the LED back in, it should slide in easily, may require wiggling.

Rear:

Power Header: Standard 10pin power cable, there is NO polarity for this connection. It can be connected either way

MIDI Out Header: This is a 4 pin header but only 3 or 2 connections need to be used. To connect to a DIN cable, either GND, 5 (to pin 5, current sink/aka -), and 4 (to pin 4, current source/aka +) should be used. For internal module to module connections, only pin 4 and 5 should be used. The ground pin is only for the shield in a midi cable, it is never connected on a midi input and isnt necessary for the short module to module lengths

I2C Header: 3 pin header to connect to other I2C devices in your rack, this is an unbuffered connection so cable lengths should be as short as possible (20cm/6" recommended). There are 4.7k pull up resistors on this connection

Module Orientation jumpers: There are 3 of these jumpers which determine how the module operates depending on if the jacks are on top or bottom. They will come installed in the position matching your panel but can be changed should you want to flip it. "INV" is Jacks on Top, the white position is jacks on bottom. Changing these jumpers will change the numbering of the faders from left to right (1->8) in both MIDI and I2C and will invert the voltage response (i.e. 10->0V from top to bottom). The jumper is shown in the "jacks on top" position in the pic below. ALL THREE JUMPERS MUST BE IN THE SAME POSITION for the module to operate correctly.

Module Config DIP switch: This allows you to switch between I2C Follower and I2C Leader modes easily. Simply move the switch to the "lead" position and restart the module (you can press the blue reset button once). The other 3 positions are for future expansion and not currently implemented.

Connector for Expander: This connects the F8R to the I/O expander. The cable is attached to the expander. Note the keyway at the top of the part, the connecter will ONLY connect one way
Read more
MRP:$208.10 SAVE 11%
 1 in stock $186.14
Michigan Synth Works Twiigs Quad Bernoulli Gate Module (black)
Cat: 802372 Rel: 07 Jan 21
 
Signal input module
Notes: This is 2 x opensource branches. The input of channel one is normalled to all other inputs so you can run this as 1 to 4, 2x 1 to 2, etc. Dual Color LEDs on sliders
Read more
MRP:$220.65 SAVE 14%
 1 in stock $189.28
Click for better price!
or call +44 20 7424 1960
quote 802372
Michigan Synth Works Twist Meta-Modulator Module (black)
Michigan Synth Works Twist Meta-Modulator Module (black) (digital/effect/oscillator/ring modulator/VCA/waveshaper synth module)
Cat: 802374 Rel: 26 Feb 21
 
Meta modulator
Notes: 6HP Micromodule of MI Warps.
Read more
 1 in stock $159.99
Click for better price!
or call +44 20 7424 1960
quote 802374
Maneco Labs Pikoloops Sample Player Module Maneco Labs Pikoloops Sample Player Module
Cat: 992594 Rel: 22 Jan 24
 
Sample player module - 12HP
Notes: Pikoloops is Manecolabs' take on the Pkocore, developed by InfiniteDigits.

Main features:

A lo-fi music mangler based on the Raspberry Pi Pico .
Capable of holding 8 minutes of 8-bit 33 kHz monophonic samples.
Tempo-synced with a selectable BPM between 60 and 300, with samples mangled by beat-synced effects (stutter, retrig, gate, tunneling).
Loaded with real-time effects like a resonant filter, timestretching, volume, and wavefolding.
Sequenced with a 128-step sequencer with recording/playback
Saved and loaded via EEPROM for instant patch recall.
Able to load custom firmware, new samples, all through USB-C.
Sync-compatible with eurorack devices.
12HP eurorack module
Read more
 1 in stock $195.55
Click for better price!
or call +44 20 7424 1960
quote 992594
Malstrom Arkan Dual Voltage Polarizer Module Malstrom Arkan Dual Voltage Polarizer Module
Malstrom Arkan Dual Voltage Polarizer Module (attenuator/mixer/polarizer/ring modulator/utility/VCA/waveshaper/distortion module)
Cat: 946070 Rel: 21 Jul 23
 
Dual voltage polarizer module - 8HP
Notes: Arkan

Dual Voltage Polarizer

You may have heard this before: "You can never have enough VCAs". A voltage polarizer (also known as a bipolar VCA or a 4-quadrant multiplier) is often viewed as the VCA better suited for CV. As it can be used as a unipolar VCA and it allows you to invert a signal when it is modulated with a negative voltage. Resulting in interesting movements in your modulations.

What sets Arkan apart from other voltage polarizers is the curvature control, a feature usually only seen in unipolar VCAs. By taking a different approach to the classic voltage polarizer circuitry, Malstrom have devised a unique solution that provides a new way to shape your audio and CV. The non-linearity of the polarizer also makes Arkan really good at reaching silence when presented with a 0V CV signal.

At audio rate, Arkan acts as a ring-modulator with four controls to change timbres.

Boosting adds odd harmonics (symmetrical distortion), while offsetting adds even harmonics (asymmetrical distortion). The modulation curve changes ring modulation sharpness, and modulation strength determines the carrier dominance.

Two identical channels with carefully selected features will make Arkan your go-to modulation control hub. Arkan is especially useful for common utility duties such as mixing, scaling, inverting and offsetting. As well as CV modulation, feedback patching, and waveshaping. All this makes Arkan a very versatile tool that will certainly have a place in your patch!

Features (per channel)

- Input attenuation with inverter switch gives you more precision and range, with voltage inversion and quick silencing.
- Bias input with attenuverter control to offset your input signal or mix/invert another signal.
- CV input with curvature control allows you to shape the polarizer and improve its 0V attenuation.
- CV modulation control to fade in the modulator, allowing you to determine the amount of modulation.
- Voltage gain and polarity led indicators showing you exactly what is happening under the radar.
- Output normalled internally and externally (to other Arkans) to easily mix signals.

Additional features

Optional signal boost (x4 / +12dB) via switch on the PCB to increase voltages when needed.
5V or 10V voltage reference selection for bias voltage and CV input range to adjust Arkan to your system.

Dimensions
- 8HP.
- 28mm, Skiff-friendly.

Power consumption
- 90mA @ +12V.
- 85mA @ -12V.

I/O specs

- All inputs DC coupled.
- All inputs handle audio signals.
- All inputs have 100k input impedance. - All inputs have +-10V Input range.
- CV range +-5V or +-10V.
- Bias Voltage range +-5V or +-10V.
- Boost gain x1 or x4.
- All inputs are overvoltage protected.
- Keyed power header.
- Reverse power protection.
Read more
 1 in stock $176.73
Click for better price!
or call +44 20 7424 1960
quote 946070
Make Noise Function Function Generator Module
Make Noise Function Function Generator Module (envelope generator/LFO/sample and hold/slew limiter/envelope follower/function generator module)
Cat: 557477 Rel: 19 Dec 14
 
Function generator module - 8HP
Notes: The FUNCTION music synthesizer module is part of the MATHS family of control voltage utility modules. It is a small analog computer designed for solely musical purposes.

Features:

Generate a variety of linear, logarithmic, or exponential functions
Functions as short as 2ms and as long as 25 minutes per cycle!
Triggered Functions (Envelope)
Continuous Functions (LFO)
Invert and/ or Integrate (Lag, Slew, Portamento)
Discrete Time Functions (S&H, T&H)
LEDs indicate activity on all outputs
End of Rise and End of Cycle Pulses facilitate programming of more complex functions
All outputs capable of driving a passive 4 way mult without loading effects (no buffered mult needed here)
Perfect for modulating the DPO and just about anything else

Specifications:

Width: 8hp
Max Depth
(incl. power cable): 32mm
Power:
30mA@ +12V
20mA @ -12V
Read more
 3 in stock $175.67
Click for better price!
or call +44 20 7424 1960
quote 557477
Laine Stilts 1U Dual VC Tilt Equaliser Module (silver) Laine Stilts 1U Dual VC Tilt Equaliser Module (silver) Laine Stilts 1U Dual VC Tilt Equaliser Module (silver)
Laine Stilts 1U Dual VC Tilt Equaliser Module (silver) (dual/stereo/equaliser/filter module)
Cat: 1008000 Rel: 25 Mar 24
 
Dual voltage controlled tilt equaliser 1U module - 18HP
Notes: Lush analogue EQ switchable between tilt and Baxandall high-shelf configurations.

Perform a variety of mixing and sound design duties ranging from subtle brightness and clarity adjustments to low-end rumble removal, boosted low-pass filtering and sweep EQ.

In the default tilt mode, turning the control knob clockwise simultaneously boosts treble and cuts bass. Turning anti-clockwise boosts bass and cuts treble. These boosts and cuts are pivoted around the mid-range. With the control knob at 12 o'clock the frequency response is neutral.

With Baxandall high-shelf mode enabled, turning the control knob clockwise past 12 o'clock introduces and gentle high-shelf EQ weighted around the upper mid-range. Turning the control knob anti-clockwise results in a wide high-shelf cut with subtle bass and mid-range adjustments.

Patching the channels in series allows for radical sound shaping and band-pass responses. Each channel provides up to +/- 8db of low and high-frequency gain control, summing into a low noise output stage. Hot input signals over 15vpp are saturated by active Zener diode clipping.

Features

Precise voltage control of EQ tilt and shelf
Seamless switching between EQ modes
High-quality components used throughout

Specifications

Intellijel 1U format
Width 18HP
Depth 32mm
Power requirements ~60mA +12V/~58mA -12V
Control voltage range 0-8V
Impedance Input 100K / Output 1K
Read more
 1 in stock $156.86
Click for better price!
or call +44 20 7424 1960
quote 1008000
Laine Stilts 1U Dual VC Tilt Equaliser Module (black)
Laine Stilts 1U Dual VC Tilt Equaliser Module (black) (dual/stereo/equaliser/filter module)
Cat: 1008003 Rel: 26 Mar 24
 
Dual voltage controlled tilt equaliser 1U module - 18HP
Notes: Lush analogue EQ switchable between tilt and Baxandall high-shelf configurations.

Perform a variety of mixing and sound design duties ranging from subtle brightness and clarity adjustments to low-end rumble removal, boosted low-pass filtering and sweep EQ.

In the default tilt mode, turning the control knob clockwise simultaneously boosts treble and cuts bass. Turning anti-clockwise boosts bass and cuts treble. These boosts and cuts are pivoted around the mid-range. With the control knob at 12 o'clock the frequency response is neutral.

With Baxandall high-shelf mode enabled, turning the control knob clockwise past 12 o'clock introduces and gentle high-shelf EQ weighted around the upper mid-range. Turning the control knob anti-clockwise results in a wide high-shelf cut with subtle bass and mid-range adjustments.

Patching the channels in series allows for radical sound shaping and band-pass responses. Each channel provides up to +/- 8db of low and high-frequency gain control, summing into a low noise output stage. Hot input signals over 15vpp are saturated by active Zener diode clipping.

Features

Precise voltage control of EQ tilt and shelf
Seamless switching between EQ modes
High-quality components used throughout

Specifications

Intellijel 1U format
Width: 18HP
Depth: 32mm
Power requirements: ~60mA +12V/~58mA -12V
Control voltage range: 0-8V
Impedance Input: 100K / Output 1K
Read more
 1 in stock $156.86
Click for better price!
or call +44 20 7424 1960
quote 1008003
LA 67 T-ZED Analogue Through-Zero Phase Modulation Oscillator Module (silver)
Cat: 840142 Rel: 09 Feb 23
 
An analogue oscillator module with through-zero phase modulation - 12HP.
Notes: An analogue oscillator with through-zero phase modulation. The core of the T-ZED is the SSI2130 integrated circuit. Voltage controlled wave shape and phase modulation index allow for automated sonic versatility, and 2 separate frequency ranges mean the T-ZED can be used as an audio or CV source.

Features

Simultaneous SINE, TRIANGLE, SAW, SQUARE, and variable SHAPE outputs
Phase MOD input with bipolar INDEX circuit
V/OCT input tracks 10 octaves
FREQ spans 10 octaves, TUNE spans 1 octave
Hard SYNC input
SHAPE output (Sine to Triangle to Saw) with CV input and attenuator
Frequency range HI: 10hz-25khz
Frequency range LO: 0,1hz-200hz


Dimensions
12 HP
25 mm deep

Current Draw
55 mA +12V
45 mA -12V
Read more
 2 in stock $172.54
Klavis Mixwitch Mixer & CV/Clock-Controlled Switcher Module (silver)
Klavis Mixwitch Mixer & CV/Clock-Controlled Switcher Module (silver) (attenuator/mixer/polarizer/switch synth module)
Cat: 767375 Rel: 16 Apr 20
 
A mixer & CV or clock-controlled switcher module in 8HP.
Notes: Focused versatility seems an oxymoron when describing the features that led us to design the Mixwitch.

With only a pinch of mixing, inverting and controlled switching, we brew up a plethora of combinations and uses.

This is voltage processing magic!
The Mixwitch design comes from a frustration with attenuvertors (bipolar attenuators-inverters) whose off (neutral) position is difficult to retrieve, especially in live situations.

We went for a digitally-controlled analog path where polarity inversion would be at the touch of a button. So, the usefulness of attenuating/inverting can be realized by turning the pot down, swiftly pressing the inversion button and reopening the level. The zero level is where you expect it, with the pot full down.

Once we had a clean polarity control, we easily added a mute function offering the benefit of pre- adjusted pot settings ready to be activated at will.

The next step was to bring something extra, useful and creative. There are plenty of analog switches controlled by a clock; but arbitrarily selecting an input with a voltage is less known. Having both control capabilities combined with our specific mixer features creates a unique fusion: welcome to the Mixwitch !
Read more
 1 in stock $153.71
Click for better price!
or call +44 20 7424 1960
quote 767375
Kaona Transpos 3-CV Channel Transposable Precision Adder Module
Kaona Transpos 3-CV Channel Transposable Precision Adder Module (CV modulation/multiple/utility synth module)
Cat: 959179 Rel: 07 Nov 23
 
Three CV channel transposable precision adder module - 8HP.
Notes: Transpos lets you transpose three CV channel with a single source.

Adder:

The voltage of each CV input can be varied by plus or minus two octaves depending on the switch and the potentiometer of each channel. Transpos uses precision regulators: for example if we increase by a fifth with the switch on "+" we reduce it by a fifth when we pass on "-".

Transposer:

The 1V/o CV input will influence each of the three channels. By turning the CV potentiometer you can globally increase or decrease the transposition of the three channels at the same time.

Dimensions
8 HP
40 mm deep

Current Draw
70 mA +12V
70 mA -12V
0 mA 5V
Read more
 1 in stock $155.82
Click for better price!
or call +44 20 7424 1960
quote 959179
Kaona Skippy Live Skippy Expander Module
Kaona Skippy Live Skippy Expander Module (expander/random/sequencer module)
Cat: 990890 Rel: 15 Jan 24
 
Expander module for Skippy - 10HP
Notes: You must absolutely own Skippy to use this module; it cannot operate independently.

The firmware version 2.21 or higher must be installed on your Skippy.

Additional features:
1 CV gate or trig input for Reset
1 CV gate or trig input for Play/stop
1 Reset button
1 Play/stop button
1 Live mode on/off button
16 function potentiometers distributed over 4 rows: you can freely choose a function (BPM, STEP, BEGIN, END, GAUSS, GATE, PROBA, CHAOS, SWING, WAY) for each row.
1 row of 4 algorithm potentiometers: you can freely choose an algorithm (Euclid, Jazzy, PolyR, Tiles) for each potentiometer.
The Save function takes into account the settings used in Skippy Live.
The selected parameters for Skippy Live are automatically saved.

Technical specifications:
10 HP
Depth: 25 mm
Power consumption:
+12 V 0 mA
-12 V 0 mA
+5 V 15 mA
Comes with a connector to Skippy and Knurlies.
Read more
 2 in stock $159.99
Click for better price!
or call +44 20 7424 1960
quote 990890
Joranalogue Fold 6 Multi-Topology Wavefolder Module Joranalogue Fold 6 Multi-Topology Wavefolder Module
Cat: 790028 Rel: 21 Oct 20
 
Wavefolder module
Notes: Designed with versatility in mind, the Fold 6 is a six-stage wavefolder with simultaneous series and parallel outputs, dual signal inputs and voltage-controlled folding and overdrive shaping.

Supplier's Notes:
Often considered to be the opposite of filters within a modular system, wavefolders are designed to fold a signal over itself multiple times. This generates additional harmonics, resulting in rich timbres.

While there is a bewildering array of filter types within the synthesiser world, most wavefolders fall within only a few categories. Diode wavefolders in particular come in just two variants: series and parallel circuit topologies. Choosing a specific folder also means being limited to specific sounds and capabilities.

For the first time, Fold 6 puts forward a 6-stage hybrid series/parallel topology, yielding a greater sonic palette than ever in just 4 HP. Having both main (series) and alternate (parallel) outputs means a single module now gives access to just about all wavefolding tones imaginable.

To take things even further, an integrated symmetrical soft clipper limits the output signals to approximately 10 Vpp, keeping the amplitude within typical Eurorack levels and making it easier to create overdriven sounds at high fold ratios. This clipping stage can be driven continuously using the shape parameter, smoothly transforming the folded waveforms into pulse waves for even more harmonic content.

Two signal inputs are included, to mix audio signals or add in a DC voltage for asymmetric folding. The symmetry can also be manually controlled using the dedicated knob. Of course, both fold and shape parameters feature voltage control, to enable continuous timbral modulation.

Moving beyond simple signal processing, Fold 6 also lends itself perfectly for feedback patching, CV folding or frequency multiplication; its modest size belies the sonic capabilities within.

Read more
 2 in stock $150.58
Click for better price!
or call +44 20 7424 1960
quote 790028
Joranalogue Compare 2 Dual Window Comparator Module
Cat: 757109 Rel: 07 Jan 20
 
Two independent analogue window comparators with voltage controlled parameters - 8HP
Notes: The window comparator is a very useful circuit building block that is common in general electronics, but rarely found in modular synths. While a regular comparator activates when the input signal voltage is higher than a threshold level, a window comparator checks if the voltage is between two levels (these form the 'window').

Compare 2 combines two such comparators and a logic section in 8 HP. The result is an advanced tool for extracting gates and pulses from analogue signals in Eurorack synths.

The detection windows are defined by the shift and size parameters, which can be varied using the knobs and CV inputs. Complementary gate outputs are available, with big three-colour LEDs showing each comparator's status.

All inputs are normalised from the left section to the right, but the two comparators can also be used completely independently. On the bottom, the outputs from both comparators are combined in various ways by the logic section, which also features LEDs.

You'll find a use for this truly multi-functional module in practically any patch, processing either CV or audio: complex rhythm generator, dual pulse width modulator, frequency multiplier/divider with PWM, digital ‘ring modulator’ with PWM, dynamic depth VCO synchronizer, voltage controlled swing, logic function array with adjustable thresholds... and many more applications waiting to be discovered!
Read more
MRP:$193.46 SAVE 12%
 1 in stock $170.45
Artículos del 1 al 50 de 152 en la página 1 de 4
1  2  3  4  »
Cart subtotal: