Resultados de la búsqueda

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Professional 6-channel audio mixer, with DSP effect unit, integrated MP3 player and Bluetooth receiver.

Input channels: 6
Number of mix/mono: 4
No. of stereo: 1
Mic input: 0.6 mV, bal. 4 x XLR
Line input: 80 mV (stereo), 2 x 6.3 mm jack L/R - 7 mV (mono), 4 x 6.3 mm jack
Aux input: 340 mV, 1 x 6.3 mm jack L/R
Master output: 760 mV, 1 x 6.3 mm jack L/R
Effect send: 9 V, 1 x 6.3 mm jack
Headphones: = 8 O, 1 x 6.3 mm jack
USB: yes
Bluetooth: yes
Frequency range: 20-20,000 Hz
THD: < 0.03%
S/N ratio: > 75 dBA
Equalizer bass: i15 dB/80 Hz
Equalizer midrange: i15 dB/2.5 kHz
Equalizer treble: i15 dB/12 kHz
Phantom power: +48 V
Power supply: ~ 230 V/50 Hz/20 VA
Mains voltage: ~ 2 V
Mains frequency: 50 Hz
Power consumption, operation: 20 VA
Admiss. ambient temp.: 0-40 -C

Notes: Uni is a triple attenuverter utility module designed to give cases gigantic macro control knobs.

Inputs:

CV inputs 1 and 3 - CV input for bidirectional attenuation. When input cables aren't plugged into these jacks, 5v reference signals will be used.
CV input 2 - CV input for either unidirectional or bidirectional attenuation. When an input cable isn't plugged into this jack, a 5v reference signal will be used.
Switch - toggles CV input 2 between unidirectional and bidirectional attenuation.

Outputs:

CV outputs 1, 2 and 3 - attenuated CV output. If no cables are plugged into an output jack, it is summed into the subsequent output jack.

25 mA +12V 20 mA -12V 0 mA 5V
10 HP 27mm deep

Notes: The Black3 uses a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing.

What's the difference between Black2 and Green2?
Approximately 15% of the Black3 production run meet higher specifications. These are hand selected from the batch and designated as Green3.

Grado's OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

Grado's OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

The Black3 is hand assembled by Grado's team in Brooklyn, with some builders having over 25 years of experience. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. The coil winding techniques using ultra high purity copper wire, which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.

As in all Grado phono cartridges the Black3 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado's patented Flux-Bridger design allows the Black2 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

Notes: The Kenton Merge 4 can merge the data from up to 4 separate MIDI sources (e.g. Master keyboards or controllers) into a single MIDI data stream which appears at both of the MIDI out sockets. It features 4 opto-isolated MIDI inputs and 2 MIDI outputs.

The Kenton Merge 4 is powered from a mains adaptor (wall wart) so you can fit and forget.

Comes with multi-region power supply

Notes: TM is a probabilistic random sequence generator based on the research of Alan Turing. His Turing machine was a mathematical model of computation that could, in theory, create any output based on a set of instructions and input variables. In a similar way, the TM chooses random values for steps in a sequence based on the user's probability settings. By manipulating probability and sequence length, the module can generate an infinite number of sequences. Whether you're looking for a controlled random source, or an evolving melody generator, TM has you covered.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Module A-149-1 is the first module of the A-149-x range. In this group we present by popular request several functions of Don Buchla's "Source of Uncertainty 265/266" (SOU) modules that cannot be realized with existing A-100 modules. Many functions of Buchla's 265 and 266 SOU can be realized with existing A-100 modules. For details please refer to A-100 patch examples.

Module A-149-1 has available four different analogue random control voltages that are generated in different ways.

The "Quantized Random Voltages" section has available 2 CV outputs: "N+1 states" and "2N states". N is an integer number in the range 1...6 that can be adjusted with the manual control (Man N) and an external control voltage CVN with attenuator. Whenever the rising edge of the input clock signal (Clk In) appears a new random voltage is generated at the N+1 resp. 2N output. The N+1 output is capable to generate N+1 different voltage levels (or states), the 2N output up to 2N different states. If for example N is set to 4 the N+1 output generates up to 5, the 2N output 16 different states. The voltage steps of the 2N output are adjusted to 1/12 V in the factory. Consequently, exact semitones can be obtained in combination with a VCO. The voltage steps of the n+1 output are adjusted to 1.0 V in the factory corresponding to octave intervals in combination with a VCO. For each output a trimming potentiometer is available on the pc board that enables the user to select other voltage steps for the output in question.

Even the "Stored Random Voltages" section has 2 stepped CV outputs available: one with even voltage distribution of the max. 256 output states and second one with adjustable voltage distribution probability. The distribution probability is adjusted by a manual control (Man D) and an external control voltage CVD with attenuator. With the control set fully counter-clockwise most of the random voltages will be low magnitude but even medium and high magnitude voltages may appear but with smaller probability. As the control is turned to the right (or a positive control voltage appears at the CVD input) the distribution moves through medium to high magnitude voltage probability. The symbol at the lower jack socket shows this coherence graphically. The voltage range is 0...+5V for both outputs of the "Stored Random Voltages" section. For each output a trimming potentiometer is available on the pc board that enables the user to select another voltage range for the output in question.

The A-149-1 can be extended by 8 random digital voltages with the A-149-2 Digital Random Voltages module.

Dimensions
12 HP
60 mm deep

Current draw
40 mA +12V
10 mA -12V

Notes: Are you a synth enthusiast looking for the ultimate addition to your setup? Look no further than the Novation Summit - a powerhouse synthesizer that delivers unparalleled sound quality and versatility.

With 16-voice polyphony and dual-filter architecture, the Summit allows you to create rich, complex sounds that are both dynamic and expressive. And with its intuitive interface and advanced features, including dual stereo effects engines and an arpeggiator, the Summit is perfect for both studio production and live performance.

But with a piece of gear as valuable as the Novation Summit, it's essential to protect it from any potential damage. That's where Decksaver comes in! Decksaver's custom-moulded polycarbonate cover is specifically designed to fit the contours of the Summit, providing maximum protection against dust, spills, and accidental impacts.

Crafted from ultra-durable polycarbonate material, this Summit cover is super-tough yet lightweight, ensuring that your precious synth is always safeguarded without weighing you down. So whether you're transporting your Summit to a gig or storing it at home, you can rest easy knowing that it's protected by a Decksaver cover.

Investing in the Novation Summit is a big step for any musician, but protecting your investment is just as important. So why wait? Grab a Decksaver cover today and keep your Summit safe and sound!

Features Decksaver's own Soft-fit inserts to protect delicate wooden cheek panels.

Dimensions

Weight 1.65 kg
Length 101.5cm
Depth 31 cm
Height 5.5cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires, and sunlight.

Notes: The Flex premium broadcast-style boom arm is a key element to any ergonomically sound, clutter-free setup. An internal spring design and integrated cable routing channel deliver seamless design and operation while remaining visually appealing. Content Creators, Podcasters and Musicians can all benefit from the freedom and efficiency achieved by the Flex. Flex is the perfect solution for many of MXL's most popular microphones like the 770, 990, and BCD-1.

Gone are the days of that clunky boom arm drooping down while trying to record the perfect podcast. Flex's internal suspension system and adjustable weight calibration ensure that your mic will stay put so you can keep your focus on creating. A sleek, modern design allows you to add the functionality of a boom arm without the eyesore of another "thing".

Boom: Extruded Aluminum

Mount: Desktop C Clamp

Rotation: 360 degrees

Max Reach: 32"

Mount thread: 5/8" threading with a 3/8" adapter

In the box:

Flex boom arm
C-Clamp for desktop
3/8" to 5/8" adapter

Notes: Synthrotek's original Mean Screamer Pedal goes way beyond a typical tube screamer clone with a couple of great mods. An original 4558 OP-AMP IC has been used to give it that beautiful classic boost.

Notes: Remote extension module that allows to connect 16 signals (audio, CV, gate or whatever) between large or spread-out cases.

To avoid bleeding, signals are isolated with a ground line between them (both in the ribbon cable and the printed circuit).

The bundle consists in two XT modules and two ribbon cables (1, 1.5 or 2 meters depending on the option selected).

This is a passive module, it does not draw any current.

5 HP

Notes: The Impact GX49 and GX61 are dynamic and expressive instruments, tailored to composition & performance with your computer music system. The no-fuss interface is a great entry into the world of Nektar controllers.

Featuring a 49-note (4 octave) or 61-note (5 octave) keyboard, pitch-bend wheel, modulation wheel and foot switch socket. Two multi-colored octave buttons enable shifting the keyboard range up or down -3/+4 octaves with the LED colors changing to show the exact status, Impact GX are well equipped to deliver a great workflow.

Dedicated transpose buttons allow you to shift the keyboard range up to +/- 12 semi tones. The buttons can quickly be re-purposed to change the Global MIDI Channel or send Program messages. Additionally an assignable potentiometer provides control over any MIDI parameter, by default controls mixer volume.

Nektar DAW Integration for many of the most commonly used DAWs makes it easy to get going, and a pleasure to use. With Impact GX49 your controller keyboard is part of your system, giving you the creative freedom to compose, perform and play, without having to reach for your mouse constantly.

Transport - Extended!

Eight buttons intended for DAW control, are at the center of the Impact GX. Essential tasks like transport activation or navigating tracks are highly repetitive and reaching for the mouse every time, can kill any seed of inspiration. Used with Nektar DAW integration, the 8 buttons extend functionality to include control over transport and a host of other important DAW functions, right from Impact GX.

The buttons can also be assigned to MIDI messages for use with any MIDI software that's not supported by Nektar DAW Integration. A primary and a secondary message can be programmed for each of 7 buttons, delivering 14 programmable options total.

Nektar DAW integration - ticking all the right boxes:

Nektar DAW integration is carefully crafted to give the best experience with your Nektar hardware. It delivers the freedom to create, instead of having to reach for the mouse constantly when you are in the middle of capturing an idea.

With Nektar DAW integration, the hard work is done, so you don't have to. Once installation is complete, Impact GX offers an extended feature set, normally unavailable on a compact controller.

MIDI control & setup functions:

Impact GX is a MIDI controller as well as a DAW controller. If you use MIDI software that's not supported by Nektar DAW Integration, a host of options are available for you to set up MIDI control yourself.

Each of the 14 assignable MIDI buttons, the modulation wheel, foot switch and of course the big control knob, can be assigned to send out MIDI cc messages. The assignable buttons (14) can in addition be configured to send out Program message or MMC transport control. MMC (MIDI Machine Control) is often supported by DAWs that don't allow for advanced integration, so with this option Impact GX covers all the bases.

Connectivity & Apple iOS:

As a low powered USB device, Impact GX works with all USB devices that feature a Class compliant MIDI driver. That includes all version of Windows from XP and higher, Apple OS X 10.5 and higher plus Linux (as long as a USB MIDI driver package is installed).

And if you are often on the move you can easily hook your Impact GX keyboard to an Apple iPad using the iPad's optional USB camera connection kit (optional). Of course the Impact GX is powered by the iPad so you can work away for as long as your iPad remains charged.

Bitwig 8-track included:

Bitwig 8-Track in included with every Impact GX so you can start producing, performing, and designing sounds like a pro from day one. Bitwig 8-Track gives you access to over 50 software instruments and effects for use on up to 8 audio or MIDI project tracks, and you can use any 3rd party VST plug-ins you might own too if you like. The 'Bitwig Essentials Package', a highly versatile handpicked selection of loops, clips, and samples, is also included to help you get started. So put all that together and you have a powerful sketchpad for your musical ideas featuring the acclaimed workflow of Bitwig Studio.

Notes: Use the Pico Platform compressor / limiter on any instrument for precise and powerful control of your signal's volume and of course, extended sustain on leads. Add subtle dynamic control to level out peaks and valleys in your signal or give your sound a real squeeze for extra sustain and pop. The Pico Platform is extremely transparent with no tonal colouring, making it extremely versatile and easy to work into your existing set up.

The Pico Platform's control set is simple yet comprehensive. Use the Sustain control to adjust the compressor ratio or limiter threshold for a subtle or extreme effect. The addition of a Blend knob allows for adding seamless sustain while preserving attack and tone. Adjust the Attack control to set when the compressor activates after a transient. Use the Mode button to choose between Compressor and Limiter modes and Soft Knee or Hard Knee compression curves for smoother or more dramatic compression styles.

Studio-style compressor / limiter to precisely tune dynamics
Compressor and Limiter modes for a wide range or compression styles
Selectable Hard Knee / Soft Knee compression curves
Sustain adjusts Compressor ratio or Limiter threshold
Attacks adjusts attack time
Blend adjusts dry/wet ratio
Volume control overall output level
Power adapter included

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 3.65 x 2.0 x 2.0
Current Draw: 100mA
Year Released: 2023

Notes: The Impact GX49 and GX61 are dynamic and expressive instruments, tailored to composition & performance with your computer music system. The no-fuss interface is a great entry into the world of Nektar controllers.

Featuring a 49-note (4 octave) or 61-note (5 octave) keyboard, pitch-bend wheel, modulation wheel and foot switch socket. Two multi-colored octave buttons enable shifting the keyboard range up or down -3/+4 octaves with the LED colors changing to show the exact status, Impact GX are well equipped to deliver a great workflow.

Dedicated transpose buttons allow you to shift the keyboard range up to +/- 12 semi tones. The buttons can quickly be re-purposed to change the Global MIDI Channel or send Program messages. Additionally an assignable potentiometer provides control over any MIDI parameter, by default controls mixer volume.

Nektar DAW Integration for many of the most commonly used DAWs makes it easy to get going, and a pleasure to use. With Impact GX49 your controller keyboard is part of your system, giving you the creative freedom to compose, perform and play, without having to reach for your mouse constantly.

Transport - Extended!
Eight buttons intended for DAW control, are at the center of the Impact GX. Essential tasks like transport activation or navigating tracks are highly repetitive and reaching for the mouse every time, can kill any seed of inspiration. Used with Nektar DAW integration, the 8 buttons extend functionality to include control over transport and a host of other important DAW functions, right from Impact GX.

The buttons can also be assigned to MIDI messages for use with any MIDI software that's not supported by Nektar DAW Integration. A primary and a secondary message can be programmed for each of 7 buttons, delivering 14 programmable options total.

Nektar DAW integration - ticking all the right boxes:
Nektar DAW integration is carefully crafted to give the best experience with your Nektar hardware. It delivers the freedom to create, instead of having to reach for the mouse constantly when you are in the middle of capturing an idea.

With Nektar DAW integration, the hard work is done, so you don't have to. Once installation is complete, Impact GX offers an extended feature set, normally unavailable on a compact controller.

Transport control with ability to goto and set locators, track navigation, volume control, launching windows and patch navigation is all available right from Impact GX. Check out the function overview chart below and see how the Impact GX ticks all the right boxes.

MIDI control & setup functions:
Impact GX is a MIDI controller as well as a DAW controller. If you use MIDI software that's not supported by Nektar DAW Integration, a host of options are available for you to set up MIDI control yourself.

Each of the 14 assignable MIDI buttons, the modulation wheel, foot switch and of course the big control knob, can be assigned to send out MIDI cc messages. The assignable buttons (14) can in addition be configured to send out Program message or MMC transport control. MMC (MIDI Machine Control) is often supported by DAWs that don't allow for advanced integration, so with this option Impact GX covers all the bases.

The Setup menu also enables Program messages, Bank LSB/MSB to be sent out on the fly as well as settings for selecting one of the 4 velocity curves, setting the Global MIDI Channel and assigning the transpose buttons.

Connectivity & Apple iOS:
As a low powered USB device, Impact GX works with all USB devices that feature a Class compliant MIDI driver. That includes all version of Windows from XP and higher, Apple OS X 10.5 and higher plus Linux (as long as a USB MIDI driver package is installed).

And if you are often on the move you can easily hook your Impact GX keyboard to an Apple iPad using the iPad's optional USB camera connection kit (optional). Of course the Impact GX is powered by the iPad so you can work away for as long as your iPad remains charged.

Bitwig 8-track included:
Bitwig 8-Track in included with every Impact GX so you can start producing, performing, and designing sounds like a pro from day one. Bitwig 8-Track gives you access to over 50 software instruments and effects for use on up to 8 audio or MIDI project tracks, and you can use any 3rd party VST plug-ins you might own too if you like. The 'Bitwig Essentials Package', a highly versatile handpicked selection of loops, clips, and samples, is also included to help you get started. So put all that together and you have a powerful sketchpad for your musical ideas featuring the acclaimed workflow of Bitwig Studio.

Nektar DAW Integration supports Bitwig 8-Track so using Nektar Impact GX and Bitwig 8-Track together is a fantastic combination. If you are just starting out you will find it's the perfect way to take your first steps in the world of digital music creation.

Notes: Zoom H1essential - 32-Bit Float Recording for All

The World's Easiest Recorder, Just Got Easier

With the push of a button the H1essential captures perfect audio for musicians, podcasters, filmmakers, and content creators. Simply hit record and discover the power of 32-bit float.

32-Bit Float Magic

With 32-bit float recording, you never have to adjust levels. The H1essential captures every nuance of your sound ensuring high-quality audio with every take

The First Handy Recorders with Accessibility

The Essential Series was designed with Accessibility for the blind and visually impaired. Navigate the menu with audible descriptions through the built-in speaker or headphones. Creators can choose English, Spanish, French, Japanese, German, Italian or Chinese.

Loud and Clear

The onboard X/Y microphones capture clean audio up to 120 dB SPL, equivalent to the sound of a high-performance engine.

The Perfect Practice Companion for Musicians

Musicians can use the H1essential to record every rehearsal, a great way to improve your playing. Features like overdubbing and playback-speed-adjustment are great for writing and practicing.

Sound Makes the Scene

The H1essential is great for filmmakers. Record and send audio directly to your camera or use it to record sound effects to complete your scene.

For Storytellers

Podcasters can mount the H1essential on a tripod for sit down conversations or use 'mono mode' for on-the-go interviews.

Big Features, Small Package

The H1essential has advanced features such as overdubbing, pre-record, auto record, and playback speed adjustment.

Features

32-bit float recording: perfect audio with no need to set gain
120 dB SPL 90 degree XY Mics
Records up to 96kHZ sample rate
New OLED Display
Overdubbing, auto record, pre-record and timer functions
USB Microphone Function
Audio guidance function for the blind and visually impaired
10 hours of battery life on 2 AAA Batteries or USB-C Bus power

Specs

Inputs

Built-in mic: 90 degree XY stereo format
Directionality: Unidirectional
Sensitivity: -37 dB/1 Pa at 1 kHz
Maximum sound pressure input: 120 dB SPL

MIC/LINE IN jack

Connector: Stereo mini jack
Input impedance: 2 kO or more
Plug-in power: 2.5 V

Built-in mic
90 degree XY stereo format
Directionality: Unidirectional

Outputs

PHONE / LINE OUT jack
Connector: Stereo mini jack
Maximum output level: 20 mW + 20 mW(into 32O load)
Output impedance: 10 O or less
Built-in speaker Type: 20 x 30mm oval dynamic speaker
Practical maximum output: 250mW

Recorder
Recording formats:
WAV
44.1/48/96 kHz, 32-bit Float
Stereo / Mono
BWF and iXML formats supported

Recording media
4-32GB cards compatible with the microSDHC specification
64GB-1TB cards compatible with the microSDXC specification

Display
OLED: 128 x 64

USB
Connector: USB Type-C (Use a USB cable that supports data transfer.)
USB Mic: USB 2.0 High Speed
48 kHz, 24-bit
File transfer: USB 2.0 High Speed

Power

2 AAA batteries Alkaline, Lithium, or Rechargeable NiMH
AC adapter: ZOOM AD-17: DC 5 V/1 A
USB bus power is supported.

Estimated continuous operation time using batteries

Alkaline batteries: About 10 hours
NiMH batteries (800 mAh): About 9 hours
Lithium batteries: About 18 hours
Stereo recording, 48kHz/32-bit float, no headphones, Power Save 1min
These values are approximate.
Continuous battery operation times were determined using in-house testing methods.
They will vary greatly according to use conditions.

Power consumption: 5 W maximum
Dimensions: 53.9 mm (W) × 136.6 mm (D) × 29.0 mm (H)
Weight (including batteries): 92 g
Note: 0 dBu = 0.775 Vrms

Notes: Enter a galaxy of rich and vibrant delays. The Dreadbox Nostalgia 3 Stage Delay is a superb effect module that can give you amazing results in moments. Delay is a true staple in the effects world and it can take your modular music to the next level via just a few cables.

The Dreadbox Nostalgia 3 Stage Delay is ideal for a range of modular music styles, from ambient to acid house. This 10HP module fits snugly in your system and has enough CV control to keep even the most avid patcher satisfied.

117 mA +12V
25 mA -12V
35 mm deep
10HP

Notes: Excellent value from this simple but effective envelope filter pedal. User-friendly controls help you quickly dial in a tone with three different filter modes. Sounds as good on synth as it does on guitar or bass.

Supplier's Notes:
Envelope controlled filter is an effect type that ventures beyond the mainstream yet is equally at home in a wide range of genres and equally effective on guitar, bass, keys, horns and more. Electro-Harmonix is a pioneer in this effect category and has been making envelope controlled filter pedals since the 1970s! The Nano Q-Tron springboards off that deep heritage.

Here's how it works: The Nano Q-Tron responds to the user's playing style and dynamics. The volume of the input signal it receives (also called the envelope) controls the cutoff or center frequency of a swept filter. This allows the Nano Q-Tron to create tone-altering effects ranging from subtle to dynamic, auto-wah to ultra-funky. It's all about how you play and it's super interactive.

Specifications

Circuit: Analog
Bypass: True Bypass
Audio: Mono
Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 10mA

Notes: A-100SSB is a combination of power supply and bus board with 8 connectors for A-100 modules, planned for applications with up to 8 modules and a max. current of 380 mA.

- Wide range mains voltage input 100-240V AC / 50-60 Hz
- IEC inlet on board for the connection of a suitable mains cable (a suitable mains cable has to be purchased by the customer locally, it's not included with the A-100SSB)
- Switching supply with +12V/380 mA and -12V/380mA for the operation of A-100 modules up to 380 mA total supply current
- Safety cover at the bottom side (covers all elements that lead mains voltage)
- On board fuse
- 8 bus connectors
- LED displays for +12V, -12V and +5V
- Dimensions: about 270 mm (length) x 55 mm (width) x 35 mm (height)
- Several 3mm holes for mounting the unit on a rear panel or bottom plate

Notes: Module A-147-5 contains four voltage controlled low frequency oscillators (VCLFO) with triangle waveform outputs. All LFOs share a common frequency control. Each of the LFOs 2, 3 features a Delta control which is used to shift the frequency of the LFO in question up or down. With the Delta controls at center positions the frequencies of all LFOs are roughly the same. To control the frequencies by external control voltages four CV inputs are available which follow roughly the 1V/oct standard.

The module has these controls and in/outputs available:

Control F: manual control of the frequency for all four LFOs
Control Delta F2, F3 and F4: manual control of the frequency shift up/down for the LFO in question
Sockets CV 1...4: Frequency control voltage inputs (normalled from top to bottom)
Sockets with triangle symbol 1...4: triangle outputs
LEDs: visual displays of the triangle outputs (red = positive, yellow = negative output voltage)

Application examples:

Generation of four triangle modulation signals with a common frequency control for all LFOs and individual controls for the frequency deviation of each LFO, manually adjustable and controllable by external control voltages
Generation of modulation signals for polyphonic FM/PWM applications. For this the four CV inputs are connected to the same control voltages which are used to control the frequencies of the corresponding VCOs. That way each LFO follows the frequency of the associated VCO with the possibility to control the frequency of all VCOs (control F) and the frequency deviations (Delta F controls). For the simultaneous modulation depth control the Quad VCA module A-130-4 is recommended.
Generation of complex modulation signals by summing up the outputs (e.g. by means of a mixer module A-138n / A-138i / A-138j)

Technical notes:

The level of the triangle outputs is about +/-5V (10Vpp)
The manually adjustable frequency ranges from about 0.025 Hz (about 40 seconds) to about 50 Hz with the delta controls of LFOs 2, 3 and 4 about center position
The frequency deviations adjusted by the delta controls are about +/-1:5. Example: with 1 Hz in center position the frequency shift ranges from about 0.2 Hz in position -5 to about 5 Hz in position +5 (1 Hz/5 = 0.2 Hz, 1 Hz*5 = 5 Hz).
The manual frequency controls and the control voltage inputs have an exponential control behavior
With external control voltage the max. frequency is about 150 Hz, the minimum frequency
The scale of the CV inputs is roughly 1V/oct (not adjustable)
The CV inputs are normalled from top to bottom. Provided that only socket CV1 is patched CV1 controls the frequencies of all four LFOs.
When each CV input is patched to it's own control voltage each LFO is controlled individually by it's own CV. In this case CV1 controls only the frequency of LFO1.
Internally the rectangle outputs are available at four terminals (typ level +/-10V or 20Vpp). If required they can be wired to four sockets of a DIY breakout module made by the user, 1k protection resistors are recommended to avoid short circuits. If lower levels are required passive attenuators (voltage dividers) may be used.
Internally is even an (unbufferd) triangle sum signal available. For this each of the four triangle outputs is simply connected to the sum output terminal via a 47k resistor. This output has high impedance and should be buffered or amplified to avoid level drop when the load changes (e.g. by means of an A-180-3 or A-180-4 or A-183-3).
By changing the values of the capacitors in the LFO circuits even other frequency ranges are possible (e.g. Quad VCO to form kind of a cloud VCO). Pay attention that the accuracy of the CV input scales is not sufficient for precise 1V/oct VCO applications. The 1V/Oct scales cannot be adjusted and the circuits are not temperature compensated.

Dimensions
4 HP
45 mm deep

Notes: The Groovewasher Mondo Record & Stylus Care System

Groovewasher's top-of-the-line record and stylus care system. Elegant and effective.

Groovewasher's walnut products are solid chunks of 40 year old Black Walnut trees. Every one is unique. Some may have small surface cracks, splits or knots. This is the character of the wood, not a craftsman's mistake.

Notes: Serious Rock DNA forged into a compact, battery-powered amp

BOSS Katana amps have received accolades from guitarists everywhere for their fantastic sound and feel, onboard effects, and great value. Now, the Katana-Mini makes serious Katana tone accessible in a small, go-anywhere amp that runs on batteries. Offering sound quality that far exceeds other amps in its class, this miniature powerhouse features an authentic multi-stage analogue gain circuit for big, expressive sound, plus a traditional analogue EQ and an onboard tape-style delay. Ultra-compact and travel-ready, the Katana-Mini delivers inspiring Katana tone anywhere you want to play.

Unlike typical small, battery-powered guitar amps that offer so-so sound quality, the Katana-Mini produces big, full tone that inspires you to plug in and play for hours at a time. BOSS's comprehensive design approach includes a custom speaker, advanced hardware, refined circuitry, and special component selection, which all work together to produce maximum sound quality in a minimum footprint. The amp also incorporates BOSS's decades of research in energy efficient design, providing class-defying power and punch from only six AA-size batteries.

Inspiring Tones, Ready to Rock

The Katana-Mini's all-analogue input circuitry includes multiple gain stages that drive three classic sound settings, offering the same cascaded gain approach found in high-end amp designs. This is what gives the Katana-Mini its satisfying tone and quick, interactive feel, with distortion that's easily controlled with input volume and picking strength. Inspired by BOSS's flagship Waza amp, the Katana-Mini's Brown setting delivers expressive, high-gain tones rich with harmonics, perfect for heavy riffs and soaring solos. Crunch provides overdrive that's ideal for rock rhythms and bluesy leads, while Clean offers up crisp, sparkling tones with punchy dynamic response.

Analogue Tone Stack and Onboard Delay

In contrast to the limited EQs found in other small amps, the Katana-Mini comes equipped with a genuine three-band analog tone stack. This provides natural sound shaping via familiar bass, mid, and treble controls, just like the tone stack in a full-size stage amp. In addition, you can enhance your sound further with the Katana-Mini's cool tape-style delay. Using the dedicated time and level knobs, it's simple to dial in everything from subtle reverb-like ambience to long, warm delay repeats.

Jam at Home or Grab and Go

Thanks to the Katana-Mini's advanced-yet-compact design, you can plug into serious guitar tone any time and any place. Weighing just under three pounds, it sits easily on a tabletop or shelf at home. And with the integrated handle and battery operation, it's easy and convenient to grab the amp and play anywhere you want, indoors or out. With the aux input, you can even plug in your smartphone and jam along with your personal music library or tracks streamed from the web. And for private practice and recording situations, you'll want to take advantage of the phones/recording output, which features special cabinet voicing for real mic'd amp tone.

Specifications

Rated Power Output: 7 W
Nominal Input Level: INPUT: -10 dBu (1 M ohm), AUX IN: -10 dBu (20 k ohm)
Speaker: 10 cm (4 inches)
Controls: POWER switch, TYPE switch

GAIN knob: VOLUME knob

[EQUALIZER]
BASS knob
MIDDLE knob
TREBLE knob

[DELAY]
TIME knob
LEVEL knob
Indicators: POWER

Connectors
INPUT jack: 1/4-inch phone type
AUX IN jack: Stereo miniature phone type
PHONES/REC OUT jack: Stereo miniature phone type
DC IN jack
Power Supply: Alkaline battery (AA, LR6) x 6, Rechargeable Ni-MH battery (AA, HR6) x 6, or
AC adapter (sold separately)
Current Draw: 350 mA

Expected battery life under continuous use:
Alkaline battery: Approximately 7 hours
Rechargeable Ni-MH battery: Approximately 9 hours (When using batteries having a capacity of 2500 mAh.)
* This can vary depending on the capacity of the batteries and the conditions of use.
Accessories: Owner's manual, Alkaline battery (AA, LR6) x 6
Option (sold separately): AC adaptor (PSB series)

Size & weight

Width: 230 mm / 9-1/16 inches
Depth: 116 mm / 4-5/8 inches
Height: 181 mm / 7-1/8 inches
Weight (including battery): 1.2 kg / 2 lbs 11 oz

Notes: Verb Core Deluxe offers 8 different reverb effects in a single, straightforward stomp box format. A selection of classic and contemporary reverb types are available, with new features such as buffered tail bypass and kill dry functions. Each reverb type has adjustable Decay, Level and Tweak, which affects a different parameter depending upon the delay type selected. The dry signal follows an all-analogue signal path, keeping the signal pure and helping to avoid unwanted noise. If you need a reverb on your pedal board, this could be the answer to all your needs.

Mono or full stereo signal path
True bypass or buffered with reverb tails
8 distinct reverb types
Hold the footswitch for additional freeze function
USB-C port for firmware updates

Power supply: 9Vdc (PP3) battery or optional power adaptor
DC input connection: DC5521 jack (for optional adaptor - pin-negative)
Current consumption: <120mA
Controls: Decay, Level, Tweak, Reverb type
Modes: Room, Hall, Plate, Damp, Shim, Spring, Tre-verb, Mod-verb
Inputs: L+R 6.3mm mono jack
Outputs: L+R 6.3mm mono jack
Sampling format: 48kHz, 24-bit
Input impedance: 1M ohm
Output impedance: 1k ohm
Dynamic range: 104dB
Dimensions: 122 x 72 x 47mm
Weight: 270g

In the box

The box for this item contains:

Verb Core Deluxe pedal
Alkaline PP3 battery

Notes: DJ-specific version of AIAIAI's modular TMA-2 XE headphones, featuring 40mm S01 drivers, slim H01 headband, on-ear PU leather E02 earpieces and straight 1.5m C05 cable. Quality sound with loud, punchy response and eco-friendly credentials.

Supplier's Notes:
Modular DJ headphones.

Balanced sound
Clear sound at high volume levels
High sound isolation
Weighing only 168g
Modular headphone design

Modular DJ headphones with balanced sound for DJ performance and music exploration.

Signature bio-diaphragm drivers engineered to deliver high volume levels and minimise distortion when performing in loud environments. Weighing only 168g for enhanced comfort over extended periods of time.

Balanced sound; punchy bass

Critically acclaimed sound specifically designed for live performance. Punchy bass and balanced sound for DJ performance and music exploration.

The speaker unit contains a bio-cellulose diaphragm made from bacterial cellulose, an organic compound grown using certain types of bacteria. The precision-grown diaphragm from bio-cellulose is stiffer, lighter, and stronger than regular PET speaker units, allowing the sound-producing diaphragm to vibrate without the levels of distortion found in other speakers.

Each of these qualities results in more accurate and detailed sound from the speaker with the ability to retain clarity of sound at high volumes.

Lightweight & durable

Put to the test and trusted in the most vigorous environments - on the road, in the studio, and on stage. This requires the highest standards and zero compromise.

Modular product design

With interchangeable components such as earpads, cables, and speaker units, you can upgrade or change parts of your headphones to improve sound quality, comfort and style.

Weighing only 168g

Slim headband design made from high grade nylon covered in neoprene, results in a total headphone weight of only 168g.

High grade materials

Speaker units made from 30% recycled plastics and diaphragms made from bio-cellulose. Ear-cushions made from soft and resilient vegan leather.

The TMA-2 DJ XE comes with a number of specific features suitable for live DJing.

Cable lock

Make sure the cable are not pulled out while playing by locking it to the speaker unit.

Adjustable cups

Change the position of the speaker units for the perfect headphone fit.

Angled stereo plug

Reduce the risk of pulling the plug from the mixer, and less intrusive cable when you are beat mixing.

Stereo jack adapter

Change from a stereo mini jack (3.5 mm) to a larger stereo jack (6.3 mm) with the adaptor.

In the box

S01 . Balanced sound - Bio-diaphragm

Engineered with a 40mm speaker diaphragm made from stiff bio-cellulose to reduce distortion and increase transparency. Tuned for a balanced, accurate sound. Balanced sound - Bio-diaphragm.

H01 . Slim - PU foam

Slim and lightweight polycarbonate headband with soft, durable PU foam padding.

E02 . On ear - PU leather

Soft on-ear memory foam cushions covered with PU leather. The thickness and materials gives high isolation and a punchy sound. Strong bass and low end dynamics.

C05 . Straight - 1.5m - Adapter

Straight black 1.5m thermo plastic cable with soft touch surface. Comes with 1/4 to 1/8 screw-on adapter.

As a music creator, you need headphones that can keep up with your evolving needs and styles. These TMA-2 modular headphone system offers a customizable solution that adapts to your creative process. With interchangeable components such as earpads, cables, and drivers, you can upgrade or change parts of your headphones to improve sound quality, comfort, or style.

By investing in this modular headphone system, you're not just buying headphones - you're investing in a long-term solution that evolves with your music. This reduces electronic waste while ensuring that you always have the optimal headphones just for you.

Diaphragm: Bio-cellulose
Driver diameter: 40 mm
Impedance: 32 Ohm
Magnet: High-grade Neodymium
Max power: 100 mW
Rated power: 40 mW
Resonance freq: 80 Hz

Notes: The Prestige Series of 78-RPM cartridges are designed for high output and excellent stability under even severe use. Each cartridge can be used for either archival or casual play without concern for undue wear on the record. All Grado 78 cartridges have a considerable reduction in tip mass resulting in extended frequency response while tracking forces can range from 2-5 grams. The experts acclaim these cartridges as virtually the finest 78-rpm cartridges in the world.

Frequency Response: 10-55,000 Hz
Principal: MI
Input Load: 47K
Output at 1KHz 5CM/sec.: 5mV
Recommended Tracking Force: 2.5
Stylus Type: C
Inductance: 45mH
Resistance: 475
Stylus Replacement: U
Mounting: S/P
Weight: 5.5

Notes: The Boom Arm is specified to hold up to 500g. Microphones include the Profile, MK 4, MK 8, TLM 102, TLM 103, MD 421, and more - please note that a shock mount will add additional weight, so be mindful if extending the arm fully.

3-point self-locking boom arm (with cable management and adjustable desk clamp)

780 mm (horizontal reach)
820 g

Notes: Crystal turntable mat is lighter and harder than aluminum and coated with a special technique. It helps produce a crystal clear sound with excellent separation.

Notes: Module A-160-2 is an enhanced version of the standard clock divider A-160. The module is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. The Clock input will take any digital signal from, eg. LFO, MIDI sync, or the gate from a MIDI-CV interface. At the outputs, you have access to three sets of seven different sub-divided clock signals, from half the clock frequency down to 1/128. The low/high levels of the output signals are 0V and about +10V.

The A-160-2 also has a reset input. Whenever a reset signal is sensed, all outputs are set to certain levels which depend upon the selected mode.

These are the most important features of the module:

Three different sets of dividing factors, selected by a three-position switch at the front panel:
- Power of two: 2, 4, 8, 16, 32, 64, 128
- Prime numbers: 2, 3, 5, 7, 11, 13, 17
- Integer: 2, 3, 4, 5, 6, 7, 8

Two output modes, selected by a two-position switch at the front panel:
- Gate mode: outputs act like the outputs of typical binary dividers
- Trigger mode: in this mode the outputs are AND-wired with the clock signal (i.e. the clock pulsewidth affects the pulsewidth of the outputs)
- Clock edge type selected by a jumper on the pc board:
- Positive: the rising edge of the clock signal triggers the state change of the outputs
- Negative: the falling edge of the clock signal triggers the state change of the outputs

Reset behaviour by two jumpers on the pc board:
- Level triggered: the level at the Reset input triggers the Reset
- Edge triggered: the edge of the signal at the Reset input triggers the Reset
- Positive: a high level (> 2.5V) or the rising edge at the Reset input triggers the Reset
- Negative: a low level (< 1 V) or the falling edge at the Reset input triggers the Reset

Output polarity selected by a jumper on the pc board:
- Positive: non-inverted outputs
- Negative: all seven outputs are inverted

Width: 4HP / 20mm
Depth: 35mm (Measured from the rear side of the front panel)
Current: +12V: +50mA, -12V: -0mA

Notes: Mixup is a versatile, expandable audio mixer for Eurorack format. It has eight inputs (6 on the front panel) and two outputs. Inputs 1 and 2 are single-channel mono inputs, each with its own mute switch and level control; Input 3 is a dual-channel stereo input with a shared mute and level control; and input 4 is an auxiliary unity-gain, non-mutable stereo input.

Using bus connectors on the back panel, you can chain multiple Mixups together in series, giving you the ability to mix together even more inputs, or to create sub-mixes for routing around larger systems.

Because Mixup is designed specifically for audio (and not for CV mixing), it uses AC-coupled circuitry (which reduces the potential for 'pops' when muting and unmuting audio), and it uses audio-grade, logarithmic attenuators for a smooth, even response across the entire volume range.

Notes: The 2hp VCA is a dual, linear VCA. It uses the renowned 2164 SSM architecture, giving it extremely low distortion and high quality audio outputs. With a CV input attenuator, and DC-coupled inputs this is your new go-to module for voltage controlled amplification of audio or CV.

Notes: The SLR-USB is a professional laptop stand with integrated USB hub DJ setups. The lightweight and foldable steel frame fits all standard laptop sizes from 11"-18", tablets, controllers etc. The advanced design allows you to set up the stand in 5 different positions. The stand features a USB-C PD port (3.2 Gen 1, SuperSpeed PD5) to directly power the MacBook Pro and laptops with USB-C power ports. The 4 additional USB ports are used to connect USB peripherals. The ports comply with the USB 3.2 standard, are downward compatible and offer fast data transfer with SuperSpeed support. The stand is designed for a load of up to 60 watts; to ensure a stable power supply for all devices, it should always be operated in active mode with a USB power supply. Delivery includes a practical transport bag, as well as USB cables.

Features

Foldable laptop stand with USB hub and power delivery port
Fits all standard laptop sizes from 11"-18", tablets, controllers and many other devices
Powers MacBook Pro and laptops and provides 4 additional USB ports
5 different setup positions
Can be used in active or passive USB hub mode
Foldable
The article is delivered with practical transport bag
Easy to assemble
Space-saving storing

Package contents
1 x stand, 4 x foot, 3 x USB cable, 2 x holder, 1 x bag, 1 x user manual

Technical specifications

Power supply: 5 V DC 2 A
Power connection: Mains input via USB C (M) mounting version power supply cord for USB A mains connection
Setup: Easy to assemble; Space-saving storing
Maximum load: 4 kg
Type (general stands): Laptop stand
Status LED: Power
Connections: Input: 1 x USB C (M) mounting version 5 V
Output: 1 x USB C (M) mounting version
Output: HUB via 4 x USB A (F) mounting version
USB port: 2 x USB 3.2, Typ C-PD
4 x USB 3.0, Typ A, 1,5 A

Material: Metal, powder-coated
Colour: Black

Dimensions: Width: 25 cm
Depth: 26,5 cm
Height: 30 cm
Weight: 2,05 kg

Notes: Ideal for blues and crunchy rock sounds (or for that extra punch when soloing), the Nobels ODR-1 has been the first choice and secret weapon for many players and top studio guitarists for nearly 30 years. In fact, this top selling pedal has developed its own almost cult following since it was first designed and engineered in the eighties.

When the original circuit was developed, there seemed to be countless overdrives on the market that had what many people describe as a 'nasal' tone, but Nobels worked hard on creating a very 'open' sounding pedal that works with you and your amplifier. The result was the ODR-1, German engineering at its finest with stacks of resistors and capacitors forming very precise filters and signal shaping, giving you a pedal that responds to your dynamics and adds texture to your tone in a very natural, musical way - all while allowing the character of your guitar to be fully retained.

Step forward to 2020 with the latest model ODR-1BC.

With numerous requests from the pedal community and professional players worldwide, Nobels have added the option of an internal Bass Cut switch under the battery cover to help tame your low end if needed. In standard mode though, you still get the full frequency response of the original that is perfect for warming up single coils etc. In addition, the internal power circuitry has been increased to allow for 9-18 V capability to provide extra headroom, if your playing styles and tone goals require it. These new features haven't altered the fundamental tone and vibe, but have increased the versatility of the pedal massively for modern rigs.

With the drive control, the distortion can be easily adjusted from almost clean to maximum drive. The circuit also works very well with your guitar's volume control, so by backing off the volume you can clean up your tone. The tonal range is controlled by the Spectrum control tone pot with mid-click and fluorescent pointers on the Glow-in-the-Dark knobs. Turn the knob clockwise and it increases the bass and treble at the same time, while turning it counter clockwise has the opposite effect. The midrange stays untouched in either direction, to ensure a transparent yet warm tone wherever the Spectrum knob is placed.

Notes: A Digital DJ/Producer looking for a professional, durable case solution for your Pioneer DDJ-REV7? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Pioneer DDJ-REV7, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

Specifications

Colour: Black
Weight: 2,55 kg / 5.61 lbs
Outer Dimensions (W x H x D): 77.2 x 46.7 x 13.0 cm | 30.4 x 18.4 x 5.1 inch
Inner Dimensions (W x H x D): 76.2 x 45.7 x 12.0 cm | 30.0 x 17.9 x 4.7 inch
Material: Durashock molded EVA foam
Protection: Black soft fleece interior
Protective egg-crate foam prevent damage from vibrations & shocks

Extras

Heavy duty handle
Easy grip zipper pulls
Convenient shoulder strap

Fits: Pioneer DDJ-REV7

Notes: MIXZ is a multi-channel mixing module for mixing audio, CV, and gate signals with excellent linear response and low noise. Balancing a clear visual layout and multiple mixers in a small footprint makes the MIXZ easy to use in a variety of configurations within a modular synth. Its high-quality analog mixing circuitry makes for a great sounding mixer with plenty of headroom, providing a smooth, organic merge of dynamics and excellent separation of mixing sections and channels. MIXZ has three sections:

Mixer A: a low-noise, 4-channel mixer with independent gain control for each channel.
Mixer B: a low- noise, 4-channel mixer with master gain control.
MixBus: a multi-channel mixer that mixes signals from modules utilizing the Tiptop MixBus.

Mixer A and B can be configured as either two independent, 4-channel mixers or as a single 8-channel mixer. If the output of Mixer A is not in use, then Mixer A will be routed internally to Mixer B forming the 8-channel mixer.

Tiptop MixBus is a new method we have developed to mix audio signals through the Eurorack power bus board without patch cables. A little bit of magic, eh? Although this technique is not ideal for a low-noise mix, we found it to be useful for some applications, including mixing our drum modules, which all have a MixBus-enabled output. The result is that your drum modules are always available and mixed on the master out of the MIXZ with a flip of a switch. This will save you time and frees up cables for repatching sound again and again, while keeping the channels of MIXZ free to bring other signals into the mix.

Combining the MixBus with Mixer A and B, the MIXZ sums dozens of channels in only 10HP.

Dimensions:
10 HP
36 mm deep

Current draw:
14 mA +12V
14 mA -12V

Notes: The SlingBag is a medium size bag that holds approximately 50 Vinyl records or a (MIDI) controller, an Audio Interface, a Headphone and cables. A perfect bag for the starting DJ.

It has a pocket on each side and one full size pocket in the front. Next to this the bag features the special steel bolts which make it impossible for grips and straps to break loose from the bag. The SlingBag can be used as a set in combination with the UDG SlingBag Trolley. A perfect size bag for a quick DJ set!

*Photographed records are not included

Notes: The compact and complete VCA. Filtering and mixing rolled into one powerful unit. The Dreadbox Eudemonia Filter is an analog wave generator processor. It provides accurate mixing capabilities and features a dual filter in series. The filters are a 24dB resonant Low Pass Filter and an 18dB non-resonant High Pass Filter - these allow you to shape your sound before sending to your output. In order to keep things in line, the exponential VCA has a peak indicator to help you reference your levels.

Power Consumption: 61mA @ +12V , 69mA @ -12V
61 mA +12V
69 mA -12V
35 mm deep
10HP

Notes: A-133-2 is the slim version of the A-133 but has some additional features and improvements available compared to the A-133.

Module A-133-2 can be used for a lot of applications: as a simple VCA, or a voltage controlled polarizer/attuverter, or a voltage controlled inverter up to a DC coupled ring modulator. In principle the module contains two special voltage controlled amplifiers (VCAs) that allow both positive and negative amplification.

The overall amplification is definded by the sum of the voltage generated by the Man control, the external control voltage CV and the position of the CV control which works as an attenuator for the external control voltage. Without external CV the amplification is +1 when the Man control is fully CW. In the center position the amplification is zero and fully CCW it's -1 (i.e. the incoming signal is inverted). By means of the external control voltage CV the manually adjusted amplification can be modulated. CV can be both positive or negative (i.e. bipolar) to obtain positive or negative amplification values controlled by the external CV.

In addition the CV signal can be modulated via the modulation control input Mod by means of another control voltage. The Mod socket is normalled to +5V, i.e. a constant positive voltage is used as modulation CV provided that no plug is inserted into the Mod socket.

The current amplification is displayed by a dual color LED (note: it's not a signal display but indicates the amplification, probably yellow = positive amplification, red = negative amplification)
Application examples:
voltage controlled amplifier (VCA) with pure positive overall amplification (Man + CV)
voltage controlled inverter with pure negative overall amplification (Man + CV)
voltage controlled polarizer/attuverter overall amplification changing between positive and negative (Man + CV)
DC coupled ring modulator with offset feature, the "classical" ring modulator corresponds to Man=0 and symmetrical audio signals for In and CV
additional effects by means of the modulation feature of the CV signal (using the Mod input)

Notes: The EHX 45000 Foot Controller makes everything faster and easier by delivering hands free operation of the key functions of the 45000 Multi-Track Looping Recorder. Choose a new track or loop without missing a beat. Get instant access to up to 100 loops per SDHC card. Record and Play new loops with ease.

The Foot Controller receives power from the 45000 and connects to it with a standard mono guitar cable. It's a must have!

The 45000 Foot Controller allows you to use your 45000 remotely, with your feet!
Provides instant access of up to 100 loops per SDHC card
Gives you access to Track Select, Record, Play, Loop Up and Loop Down
Large dual digit display indicates the 45000's current loop number
The Foot Controller obtains all of its power from the 45000 using a standard 1/4 guitar cable
No power required

Specifications:
Circuit: Digital
Audio: Mono
Dimensions (in): 5.75 x 4.75 x 2.5
Year Released: 2013

Notes: A Digital DJ/Producer looking for a professional, durable case solution for your Denon DJ SC LIVE 2? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Denon DJ SC LIVE 2, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

Specifications:

Colour: Black
Weight: 3,50 kg / 7.7 lbs
Outer Dimensions (W x H x D): 73.0 x 44.0 x 14 cm | 28.7 x 17.3 x 5.5 inch
Inner Dimensions (W x H x D): 66.1 x 39.9 x 11.2 cm | 26.0 x 15.7 x 4.4 inch
Material: Durashock moulded EVA foam
Protection: Black soft fleece interior
Protective egg-crate foam prevent damage from vibrations & shocks

Extras

Heavy duty handle
Easy grip zipper pulls
Convenient shoulder strap
Fits: Denon DJ SC LIVE 2

Notes: Erica Pico VCF1, is a younger brother of Erica Black Polivoks VCF, designed on the similar topology using rare Russian op amps. As result you get a filter great for acid bass lines, screaming resonance sweeps and deep wobbles.

Features:
- Lowpass and bandpass modes
- Self oscillation
- Rare russian opamps used
- Input protection against overvoltage

Dimensions
3 HP
35 mm deep

Current Draw
12 mA +12V
11 mA -12V

Notes: An interface for the case 1/4" jacks in Intelljel cases. The jacks are marked as if they are part of the case, so the jacks marked out, require an input.

The module sports both input and output for either a consumer line level (0.447Vpk) or a professional line level (1.095Vpk). These levels are controllable via jumper on the back of the module. It can also have a single input and output channel switched to pedal level. The case output is fed to the headphone amp that has a corresponding level control. The module otherwise does not have any level control and relies on using a VCA or other module to perform any level controls.

The module can essentially be run in one of three modes:

1) Stereo line level in and out

2) Stereo line level in and out via the left side and mono pedal in and out on the right side. In this mode the stereo line levels leverage TRS on the 1/4" jacks. You can use the included 3.5mm couplers to get TRS on the 3.5mm side.

3) Mono line level in and out via the left side and mono pedal in and out on the right side.

For Palette 64hp users only have two 1/4" jacks. You can choose if you want to use the case jacks as either inputs, outputs, or one input and one output.

Notes: A Digital DJ looking for a professional, durable case solution for your Pioneer DDJ-REV5 controller? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Pioneer DDJ-REV5 controller, this case is perfect for the travelling DJ that needs to protect their equipment.

Specifications

Colour: Black
Weight: 2,26 kg / 4.972 lbs
Outer Dimensions (W x H x D): 77.2 x 46.7 x 13.0 cm | 30.4 x 18.4 x 5.1 inch
Inner Dimensions (W x H x D): 76.2 x 44.1 x 11.0 cm | 30.0 x 17.4 x 4.3 inch
Material: Durashock moulded EVA foam

Protection:

Black soft fleece interior
Protective egg-crate foam prevent damage from vibrations & shocks
Extra's Extra space for cables or power adapter
Convenient carry handle and shoulder strap
Easy grip zipper pulls

Fits:

Pioneer DDJ-REV5 Controller + power adapter, extra cables

Notes: Theremin module for generating a variable control voltage by approaching/removing hand to/from an antenna.

The distance range is about 30 cm. Additionally the module is equipped with a Gate output with adjustable threshold level. To simulate the original Theremin two A-178, a VCO (e.g. A-110) and a linear VCA (e.g. A-130 or A-132) are required. But of course the A-178 can be used to control other functions in the A-100 (e.g. filter frequency, modulation depth and/or speed, tempo, attack/decay time and so on).

The CV output voltage of the A-178 can range - according to the setting of the front panel controls - from -10V...+10V.

The gate output switches from 0V to about +10V.

Power consumption: 60mA at +12V and 20mA at -12V

Depth: 40mm

HP : 8

Notes: The Dreadbox PSYCLOP is the ultimate modern utility device. It's an Effects Chain Loop with Dry/Wet mix control, Signal Attenuator and Boost as well as Expression to CV (Control Voltage) converter, all in one easy to use package suitable for string instruments or synthesizers and is also Eurorack compatible.

PSYCLOP is not your average Effects Loop Mixer. Capable of managing any type of signal from instruments or effects pedals, PSYCLOP seamlessly blends them with its parallel effects loop.

Its features include Input Attenuation of up to -20 dB and an Output Gain Boost of up to +20 dB in order to match any signals. For unity gain, simply set the Input Attenuation Amount to 100% with the IN control and using the OUT knob, adjust the Output Gain Level to 0%.

To avoid phase cancellation issues between the dry and wet signal paths, the PSYCLOP also features a simple but effective Effects Loop Phase switch, which is easily accessible on the pedal's side.

Additionally, PSYCLOP is capable of converting TRS Expression signals to CV and makes them usable with most Eurorack gear, making it a perfect device for synth fans and sound design enthusiasts. The pedal's EXP knob attenuates the CV output. When nothing is connected to its CV IN jack, the CV OUT jack will output 0-5V depending on this knobs' setting and a connected EXP pedal's position.

So all you have to do is plug in and embark on your next thrilling sound design adventure.

Notes: ADSR is a four stage linear envelope with two expressive ranges. Each stage can be modified independently allowing for the creation of complex, multi-segment envelopes. Great for modulating filters, VCAs, and oscillators.

Notes: Remote extension module that allows to connect 16 signals (audio, CV, gate or whatever) between large or spread-out cases.

To avoid bleeding, signals are isolated with a ground line between them (both in the ribbon cable and the printed circuit).

The bundle consists in two XT modules and two ribbon cables (1, 1.5 or 2 meters depending on the option selected).

This is a passive module, it does not draw any current.

5 HP

Notes: The Tonar Vinyline 4189 is a stereo MM/MC phono amplifier with external power supply unit.

Notes: Superb value for money with this hugely popular model from the ever-reliable Audio-Technica. A little smaller and a lot cheaper than the excellent M50X model, but with similarly clear, balanced performance.

Supplier's Notes:

The high-performance ATH-M40x professional headphones are tuned flat for incredibly accurate audio monitoring across an extended frequency range.

Your studio experience is enhanced with superior sound isolation and swiveling earcups for convenient one-ear monitoring. Engineered with pro-grade materials and robust construction, the M40x excels in professional studio tracking and mixing, as well as DJ monitoring.

This product includes interchangeable coiled and straight cables, a carry pouch and a 1/4" jack adapter for universal compatibility.

Notes: The Reloop Stand Hub is the industry's first innovative combination of multi-functional laptop stand and advanced USB hub with power delivery port. It is ideally suited for DJs and producers thanks to a stable power supply and networking of hardware peripherals.

The soft contact surfaces protect and provide a non-slip surface for your equipment. The deep black powder coating in a scratch-resistant finish makes the Stand Hub very resistant even when used frequently.

Thanks to the push-lock mechanism, 6 possible setup variants offer a wide range of applications. Due to the space-saving and compact design, these are ideal for use in studio or live setups.

MacBooks and laptops with USB-C power connection can be powered directly from the Stand Hub via the USB-C PD port.

Works as active or passive USB-C / USB-A hub with all laptops.

The Stand Hub has 4 high-retention USB-A 3.0 ports, one USB-C port for connecting laptops and smart devices and one USB-C PD port for both, passive and active use.

Macbooks, iPads, notebooks and various other devices (11''-18'') can be easily connected via plug- and-play, thanks to very broad compatibility.

Incl. protective bag for safe transportation
of Stand Hub and connection cables:

- USB C to C (30 cm)
- USB C to A (25 cm)
- USB C to A (50 cm)

STAND HUB

Innovative combiantion of laptop stand & advanced USB C-hub with PD support
Flexible assembly with 6 positions for a wide range of applications and places
USB-hub for DJs, producers & creatives: stable power routing and connectivity

TECHNICAL DATA

Connections:
1x USB-C 3.2 Gen 1 (SuperSpeed 5 Gbps, for connection to computer)
1x USB-C PD 3.2 Gen 1 (SuperSpeed PD5, for power supplies up to 60 watts)
4x USB-A 3.0 (hub ports in high-retention design / downward compatible)

Laptop Stand Data:
Load capacity: 5 kg
Weight: 1.4 kg
Dimensions: 290 x 250 x 270 mm (w x h x d)

Scope Of Delivery:
Laptop Stand
1 x USB-C to C cable (30 cm)
1 x USB-A to C cable (25 cm)
1 x USB-A to C cable (50 cm)
transportation bag with zipper
user manual

Notes: The Morphor Distortion - LED Based module is a compact and characterful analogue clipping distortion module. Loosely based on the legendary MXR distortion circuit this module is perfect for adding some extra crunch to your patches.

With CV-controlled gain setting, three distortion modes and a dry/wet mixing control, this module gives you lots of options to spice up your sound without taking up too much space. Internally the clipping is performed by LEDs which are also shown in the front of the module, so you can see your sound getting destroyed with your own eyes.

Weight: 53 g
Dimensions: 128.5 × 20 × 40 mm
Width: 4 HP

Notes: The 990 remains one of the industry's most ground-breaking home studio recording microphones. The first high quality condenser microphone to come into reach of working musicians, the 990 has a FET preamp and a large diaphragm for truly professional sound quality in both digital and analog recordings. This revolutionary condenser microphone continues to astound artists with its silky, high end and tight, solid low and midrange reproduction.

FET based design with transformer balanced output for a variety of applications.

Vintage body style with champagne finish.

Includes custom shockmount, mic stand adapter & carrying case.

Technical specifications:

Type: Pressure gradient condenser microphone
Capsule: 6 micron gold-sputtered
Frequency response
20 Hz - 20 kHz
Polar pattern: Cardioid
Sensitivity: 15mV/Pa
Max SPL for .5% THD: 130 dB
Impedance: 200 ohms
Equivalent noise level: 20 dB (A-weighted IEC 268-4)
Power requirements: Phantom power 48V (+- 4V)

Size and weight
60mm x 130mm / 2.36 in. x 5.11 in
544.3g / 1.2 lbs

Metal finish: Champagne

In the box:

MXL 990 Mic
Custom Shockmount
Mic Stand Adapter
Carrying Case

Notes: The 770 is a high-quality multipurpose condenser mic that vocalists gravitate to for its solid low-frequency response and clear high end. To achieve this we use a high-quality FET pre-amp and transformerless balanced output for a wide dynamic range and low noise. The 770 features include a low-frequency roll-off to reduce unwanted rumbling and a -10db pad to facilitate a wide variety of sound sources. The 770 comes with a shock mount to reduce mechanical vibrations and a rugged carrying case. The 770 is a perfect combination of quality, flexibility, and value for both professional and home recording studios.

Multipurpose workhorse microphone equally at home in a studio or streaming/podcasting setup
Low-frequency roll-off and -10db pad for a variety of sources
Neutral voicing provides the clarity needed for critical audio applications

Technical specifications:

Type: Condenser microphone
Capsule: 22mm gold-sputtered capsule
Frequency response: 20 Hz - 20 kHz
Polar pattern: Cardioid
Sensitivity: 15mV/Pa
Impedance: 150 ohms
Attenuation switch: 0dB, -10dB
High pass filter: 6dB/octave @ 150Hz
Equivalent noise level: 20 dB (A-weighted IEC 268-4)
Max SPL for .5% THD: 137 dB
S/N Ratio: 74 dB (Ref. 1 Pa A-weighted)
Power requirements: 48V phantom power

Size and weight:
59mm x 158mm / 2.32 in. x 6.22 in.
453.59g / 1lb

Metal finish: Black with black grill
Included accessories: MXL case | MXL 70 shock mount

In the box:

MXL 770 Mic
Carrying Case
High Isolation Shockmount